Embed Size (px)
Citation preview
SUPPLY OF SPARE PARTS AND REPAIR OF DIESEL & GAS ENGINES
+34 881 898 566 / navalco.es
We have agreements with main European manufacturers, what guarantees the highest quality and an interchangeability 100% OEM.
Spare parts for engines Deutz 628, 640, 645 y 620, Wartsila-Vasa 46, 32, 22 y 20. ABC DZ & DX, Sulzer Z40.
Our scope of supply is based mainly on the entire range of spare parts for Deutz and Wartsila engines, however our technical-commercial team can assist you with other brands and manufacturers upon request.
Supply of spare parts
WARTSILA
+34 881 898 566 / navalco.es
We also have a large stock of parts reconditioned in our workshop, following strictly the manufacturer’s instructions, tested and with total guarantee of interchangeability.
> Pistons > Cylinder liners > Piston rings > Bearings
> Valves > Injection components > Gasket sets > Cylinder heads
> Instrumentation > Turbocharger spares> Special tools> Filters
More than 15.000 references on stock
+34 881 898 566 / navalco.es
24 / 7 Availability
> Complete overhaul of engines.> Repair and calibration of injection equipment.> Honing cylinder liners.> Reconditioning of engine components: cylinder heads, cylinder liners, pistons, connecting rods, coolers...> Machining of cylinder block landing surfaces.> Reconditioning of turbochargers.> Hydraulic tests.> Ultrasonic cleaning.> Laser alignment.> Generators maintenance and repair.> Mobile workshop.> Balancing machine.
More than 3.200 m2 facilities with special equipment for reconditioning of engines and components.
Workshop
+34 881 898 566 / navalco.es
Technical office
Technical diagnosis.
Expert’s report.
Non-destructive tests.
Measurement of emissions.
+34 881 898 566 / navalco.es
Supply and manufacture of generator sets up to 2,000 Kva. stationary and marine application.
Navalco energy
We have a mobile load and test bench up to 750 Kw.
Generator rental up to 2.000 Kva. 50-60 Hz.
+34 881 898 566 / navalco.es
Certifications
Lugar y fecha/Place and date:Barcelona, 15 marzo 2019
Oficina de emisión/For the Certification BodyDNV GL – Business AssuranceGran Via de les Corts Catalanes, 130-136, Pl. 9 08038 Barcelona, Spain
Ana del Rio SalgadoRepresentante de la dirección/Management Representative
El incumplimiento de las condiciones establecidas en el Contrato puede dar lugar a la cancelación del certificado/Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL BUSINESS ASSURANCE ESPAÑA, SLU, Gran Via de les Corts Catalanes, 130-136, Pl. 9 08038 Barcelona, Spain. TEL:+34 93 479 26 00. www.dnvgl.es/assurance
MANAGEMENT SYSTEM CERTIFICATENúmero de certificado:/Certificate No.:284851-2019-AQ-IBE-ENAC
Fecha Inicial de Certificación:/Initial date: 22 octubre 2013
Validez:/Valid:15 marzo 2019 - 15 marzo 2022
Se certifica que el sistema de gestión de/This is to certify that the management system of
NAVALCO, S.L.C/ Dársena de Oza, 14, 15006, A Coruña, A Coruña, Spain
es conforme a la Norma del Sistema de Gestión de Calidad/has been found to conform to the Quality Management System standard:
ISO 9001:2015
Este certificado es válido This certificate is valid para el siguiente campo de aplicación: for the following scope:
Suministro de repuestos para motores navales e industriales.
Supply of spare parts for naval and industrial engines.
Lugar y fecha/Place and date:Barcelona, 15 marzo 2019
Oficina de emisión/For the Certification BodyDNV GL – Business AssuranceGran Via de les Corts Catalanes, 130-136, Pl. 9 08038 Barcelona, Spain
Ana del Rio SalgadoRepresentante de la dirección/Management Representative
El incumplimiento de las condiciones establecidas en el Contrato puede dar lugar a la cancelación del certificado/Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL BUSINESS ASSURANCE ESPAÑA, SLU, Gran Via de les Corts Catalanes, 130-136, Pl. 9 08038 Barcelona, Spain. TEL:+34 93 479 26 00. www.dnvgl.es/assurance
MANAGEMENT SYSTEM CERTIFICATENúmero de certificado:/Certificate No.:284852-2019-AE-IBE-ENAC
Fecha Inicial de Certificación:/Initial date: 15 marzo 2016
Validez:/Valid:15 marzo 2019 - 15 marzo 2022
Se certifica que el sistema de gestión de/This is to certify that the management system of
NAVALCO, S.L.C/ Dársena de Oza, 14, 15006, A Coruña, A Coruña, Spain
es conforme a la Norma del Sistema de Gestión Ambiental/Has been found to conform to the Environmental Management System standard:
ISO 14001:2015
Este certificado es válido This certificate is valid para el siguiente campo de aplicación: for the following scope:
Suministro de repuestos para motores navales e industriales. Mantenimiento de motores.
Supply of spare parts for naval and industrial engines. Repair and maintenance services.
Place and date: For the issuing office:Barcelona, 18 March 2021 DNV - Business Assurance
Gran Via de les Corts Catalanes 130-136, Pl. 9, 08038,Barcelona, Spain
Ana del Rio SalgadoManagement Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
ACCREDITED UNIT: DNV GL Business Assurance España, S.L.U., Gran Via de les Corts Catalanes 130-136, Pl. 9, 08038 Barcelona, Spain - TEL: +34 93 479 26 00.www.dnvgl.es/assurance
MANAGEMENT SYSTEM
CERTIFICATE
Certificate no.:284853-2019-AHSO-IBE-ENAC
Initial certification date:15 March 2016
Valid:15 March 2019 – 14 March 2022
This is to certify that the management system of
NAVALCO, S.L.Avenida da Prensa, 56 - 57, Polígono Sabón, 15142, Arteixo, A Coruña, Spain
has been found to conform to the Occupational Health and Safety Management System standard:
ISO 45001:2018
This certificate is valid for the following scope:
Supply of spare parts for naval and industrial engines. Engine maintenance.
Polígono Sabón, Av. da Prensa, 5615142 Arteixo, A CoruñaEspaña
T / +34 881 898 566
43° 19’ 21.2” N8° 30’ 15.8” W
Contact
