Upload
buikhanh
View
216
Download
0
Embed Size (px)
Citation preview
245
Literaturverzeichnis ADAM, D. (2000): Investitionscontrolling, 3. Aufl., München et al. 2000.
AGHEZZAF, E. (2005): Capacity Planning and warehouse location in supply chains with uncer-
tain demands, in: Journal of the Operational Research Society, Vol. 56 (2005), S. 453-462.
ALBACH, H. (1962): Investition und Liquidität, Wiesbaden 1962.
ALICKE, K. (2003): Planung und Betrieb von Logistiknetzwerken – Unternehmensübergrei-
fendes Supply Chain Management, Berlin et al. 2003.
ALMEDER, C.; PREUSSER, M.; HARTL, R. (2009): Simulation and optimization of supply chains
– alternative or complementary approaches, in: GÜNTHER, H.-O.; MEYR, H. (Hrsg.): Supply
Chain Planning, Berlin et al. 2009, S. 29-53.
ALTIPARMAK, F.; GEN, M.; LIN, L.; PAKSOY, T. (2006): A genetic algorithm approach for
multi-objective optimization of supply chain networks, in: Computers & Industrial
Engineering, Vol. 51 (2006), S. 196-215.
AMBROSINO, D.; SCUTELLÀ, M. (2006): Distribution network design: New problems and
related models, in: European Journal of Operational Research, Vol. 165 (2005), S. 610-624.
AMIRI, A. (2006): Designing a distribution network in a supply chain system – Formulation
and efficient solution procedure, in: European Journal of Operational Research, Vol. 171
(2006), S. 567-576.
ARIKAN, E.; FICHTINGER, J.; JAMMERNEGG, W. (2007): Single Period Combined Inventory and
Pricing Models, in: GÜNTHER, H.-O.; MATTFELD, D.; SUHL, L. (Hrsg.): Management logisti-
scher Netzwerke, Heidelberg 2007, S. 179-200.
ARNDT, H. (2008): Supply Chain Management – Optimierung logistischer Prozesse, 4. Aufl.,
Wiesbaden 2008.
W. Albrecht, Integrierte Netzwerk- und Liquiditätsplanung von Supply Chains,DOI 10.1007/978-3-658-06801-1, © Springer Fachmedien Wiesbaden 2014
246
ARNOLD, D.; KUHN, A.; FURMANS, K.; ISERMANN, H.; TEMPELMEIER, H. (2008): Handbuch
Logistik, 3. Aufl., Berlin et al. 2008.
ARNTZEN, B.; BROWN, G.; HARRISON, T.; TRAFTON, L. (1995): Global Supply Chain Ma-
nagement at Digital Equipment Corporation, in: Interfaces, Vol. 21 (1995), S. 69-93.
AVITTATHUR, B.; SHAH, J.; GUPTA, O. (2005): Distribution centre location modelling for dif-
ferential sales tax structure, in: European Journal of Operational Research, Vol. 162 (2005), S.
191-205.
BACKHAUS, K. (1995): Investitionsgütermarketing, 4. Aufl., München 1995.
BACKHAUS, K.; BÜSCHKEN, J.; VOETH, M. (2003): Internationales Marketing, 5. Aufl., Stutt-
gart 2003.
BACKHAUS, K.; HERBST, U.; VOETH, M.; WILKEN, R. (2010): Allgemeine Betriebswirtschafts-
lehre – Koordination betrieblicher Entscheidungen, 4. Aufl., Berlin et al. 2010.
BAGHERPOOR, Z.; PARHIZI, S.; HOSEININIA, M.; HEIDARI, N.; GHASEMI YAGHIN, R. (2009):
Warehouse Location Problem, in: ZANJIRANI FARAHANI, R.; HEKMATFAR, M. (Hrsg.):
Facility Location, Berlin et al. 2009, S. 295-314.
BAKAL, I.; GEUNES, J.; ROMEIJN, H. (2008): Market selection decisions for inventory models
with price-sensitive demand, in: Journal of Global Optimization, Vol. 41 (2008), S. 633-657.
BALLOU, R. (1968): Dynamic Warehouse Location Analysis, in: Journal of Marketing Re-
search, Vol. 5 (1968), S. 271-276.
BANKHOFER, U. (2001): Industrielles Standortmanagement, Wiesbaden 2001.
BARAHONA, F.; JENSEN, D. (1998): Plant location with minimum inventory, in: Mathematical
Programming, Vol. 83 (1998), S. 101-111.
247
BARLA, S. (2003): A case study of supplier selection for lean supply by using a mathematical
model, in: Logistics Information Management, Vol. 16 (2003), S. 451-459.
BARLETT, C.; GHOSHAL, S. (1990): Internationale Unternehmensführung, Frankfurt/Main et al.
1990.
BARROS, A.; DEKKER, R.; SCHOLTEN, V. (1998): A two-level network for recycling sand – A
case study, in: European Journal of Operational Research, Vol. 110 (1998), S. 199-214.
BAUMGARTNER, K.; FUETTERER, A.; THONEMANN, U. (2012): Supply chain design considering
economies of scale and transport frequencies, in: European Journal of Operational Research,
Vol. 218 (2012), S. 789-800.
BAUMOL, W.; WOLFE, P. (1958): A Warehouse-Location Problem, in: Operations Research,
Vol. 6 (1958); S. 252-263.
BEA, X.; FRIEDL, B.; SCHWEITZER, M. (2004): Allgemeine Betriebswirtschaftslehre, Band 1,
9. Aufl., Stuttgart 2004.
BEAMON, B. (1999): Measuring supply chain performance, in: International Journal of
Operations & Production Management, Vol. 19 (1999), S. 275-292.
BEAN, J.; HIGLE, J.; SMITH, R. (1992): Capacity Expansion under Stochastic Demands, in:
Operations Research, Vol. 40 (1992), S. 210-216.
BEHRENS, K. (1971): Allgemeine Standortbestimmungslehre, 2. Aufl., Opladen 1971.
BIDHANDI, H.; YUSUFF, R.; MEGAT AHMAD, M.; ABU BAKAR, M. (2009): Development of a
new approach for deterministic supply chain network design, in: European Journal of Opera-
tional Research, Vol. 198 (2009), S. 121-128.
248
BIHLMAIER, R.; KOBERSTEIN, A.; OBST, R. (2009): Modelling and optimizing of strategic and
tactical production planning in the automotive industry under uncertainty, in: OR Spectrum,
Vol. 31 (2009), S. 311-336.
BITZ, M. (1991): Investition I – Investitionsentscheidungen unter Sicherheit, Hagen 1991.
BITZ, M.; STARK, G. (2008): Finanzdienstleistungen, 8. Aufl., München 2008.
BLOHM, H.; LÜDER, K.; SCHAEFER, C. (2006): Investition, 9. Aufl., München 2006.
BODENDORF, F. (2006): Daten- und Wissensmanagement, 2. Aufl., Berlin et al. 2006.
BOWERSOX, D.; CLOSS, D.; COOPER, M. (2010): Supply Chain Logistics Management, 3.
Aufl., Boston et al. 2010.
BRADLEY, J.; ARNTZEN, B. (1999): The simultaneous planning of production, capacity, and
inventory in seasonal demand environments, in: Operations Research, Vol. 47 (1999), S. 795-
806.
BRETZKE, W.-R. (1980): Der Problembezug von Entscheidungsmodellen, Tübingen 1980.
BRETZKE, W.-R. (2010): Logistische Netzwerke, 2. Aufl., Berlin et al. 2010.
BUSSE VON COLBE, W.; ORDELHEIDE, D.; GEBHARDT, G.; PELLENS, B. (2006): Konzernab-
schlüsse, 8. Aufl., Wiesbaden 2006.
BÜTER, C. (2010): Internationale Unternehmensführung, München 2010.
BUZACOTT, J.; CORSTEN, H.; GÖSSINGER, R.; SCHNEIDER, H. (2010): Produktions-
planung und -steuerung, München 2010.
CANEL, C.; KHUMAWALA, B. (1997): Multi-period international facilities location
– an algorithm and application, in: International Journal of Production Research, Vol. 7
(1997), S. 1891-1910.
249
CANEL, C.; KHUMAWALA, B. (2001): International facilities location – a heuristic procedure
for the dynamic uncapacitated problem, in: International Journal of Production Research, Vol.
39 (2001), S. 3975-4000.
CANT, M.; STRYDOM, J.; JOOSTE, C. (2006): Marketing Management, 5. Aufl., Cape Town
2006.
CARDONA-VALDÉS, Y.; ÁLVAREZ, A.; OZDEMIR, D. (2011): A bi-objective supply chain de-
sign problem with uncertainty, in: Transportation Research Part C, Vol. 19 (2011), S. 821-
832.
CARR, S.; LOVEJOY, W. (2000): The Inverse Newsvendor Problem – Choosing an Optimal
Demand Portfolio for Capacitated Resources, in: Management Science, Vol. 46 (2000), S.
912-927.
CHAABANE, A.; RAMUDHIN, A.; PAQUET, M. (2012): Design of sustainable supply chains un-
der the emission trading scheme, in: International Journal of Production Economics, Vol. 135
(2012), S. 37-49.
CHAHAR, K.; TAAFFE, K. (2009): Risk averse demand selection with all-or-nothing orders, in:
Omega, Vol. 37 (2009), S. 996-1006.
CHAKRAVARTY, A. (2005): Global plant capacity and product allocation with pricing deci-
sions, in: European Journal of Operational Research, Vol. 165 (2005), S. 157-181.
CHAN, F.; CHAN, H.; IP, R.; LAU, H. (2007): A decision support system for supplier selection
in the airline industry, in: Proceedings of the Institution of Mechanical Engineers Part B, Vol.
221 (2007), S. 741-758.
CHAN, Y.; CARTER, W.; BURNES, M. (2001): A multi-depot, multi-vehicle, location-routing
problem with stochastically processed demands, in: Computers & Operations Research, Vol.
28 (2001), S. 803-826.
250
CHARNES, A.; COOPER, W.; MILLER, M. (1959): Application of "Linear programming" to fi-
nancial budgeting and the costing of founds, in: The Journal of Business, Vol. 32 (1959), S.
20-46.
CHAUHAN, S.; NAGI, R.; PROTH, J. (2004): Strategic capacity planning in supply chain design
for a new market opportunity, in: International Journal of Production Research, Vol. 11
(2004), S. 2197-2206.
CHOPRA, S. (2003): Designing the distribution network in a supply chain, in: Transportation
Research Part E, Vol. 39 (2003), S. 123-140.
CHOPRA, S.; MEINDL, P. (2010): Supply Chain Management, 4. Aufl., Boston et al. 2010.
CHOY, K.; LEE, W. (2002): A generic tool for the selection and management of supplier rela-
tionships in an outsourced manufacturing environment – the application of case based reason-
ing, in: Logistics Information Management, Vol. 15 (2002), S. 235-253.
CHRISTOPHER, M. (1998): Logistics and Supply Chain Management – Strategies for Reducing
Costs and Improving Service, 2. Aufl., London 1998.
COASE, R. (1937): The Nature of the Firm, in: Economia, Vol. 4 (1937), S. 386-405.
COHEN, M.; MOON, S. (1991): An integrated plant loading model with economies of scale and
scope, in: European Journal of Operational Research, Vol. 50 (1991), S. 266-279.
COOPER, M.; LAMBERT, D.; PAGH, J. (1997): Supply Chain Management
– More Than a New Name for Logistics, in: The International Journal of Logistics
Management, Vol. 8 (1997), S. 1-14.
CORDEAU, J.; PASIN, F.; SOLOMON, M. (2006): An integrated model for logistics network
design, in: Annals of Operations Research, Vol. 144 (2006), S. 59-82.
251
CORNUEJOLS G.; SRIDHARAN, R.; THIZY, J. (1991): A comparison of heuristics and relaxations
for the Capacitated Plant Location Problem, in: European Journal of Operational Research,
Vol. 50 (1991), S. 280-297.
CORSTEN, D.; GABRIEL, C. (2004): Supply Chain Management erfolgreich umsetzen, 2. Aufl.,
Berlin et al. 2004.
CORSTEN, H.; GÖSSINGER, R. (2008): Einführung in das Supply Chain Management, 2. Aufl.,
München 2008.
CORSTEN, H.; GÖSSINGER, R. (2009): Produktionswirtschaft, 12. Aufl., München 2009.
CURRENT, J.; DASKIN, M.; SCHILLING, D. (2004): Discrete Network Location Models, in:
DREZNER, Z.; HAMACHER, H. (Hrsg.): Facility Location, Heidelberg 2004, S. 81-118.
DASKIN, M. (1995): Network and Discrete Location, New York et al. 1995.
DASKIN, M.; HOPP, W.; MEDINA, B. (1992): Forecast Horizons and Dynamic Facility Location
Planning, in: Annals of Operations Research, Vol. 40 (1992), S. 125-151.
DASKIN, M.; COULLARD, C.; SHEN, Z. (2002): An inventory-location model: Formulation,
solution algorithm and computational results, in: Annals of Operations Research, Vol. 110
(2002), S. 83-106.
DEAN, J. (1951): Capital Budgeting, New York 1951.
DIAS, J.; CAPTIVO, M.; CLIMACO, J. (2007): Efficient primal-dual heuristic for a dynamic
location problem, in: Computers & Operations Research, Vol. 34 (2007), S. 1800-1823.
DING, H.; BENYOUCEF, L.; XIE, X. (2005): A simulation optimization methodology for sup-
plier selection problem, in: International Journal of Computer Integrated Manufacturing, Vol.
18 (2005), S. 210-224.
252
DOGAN, K.; GOETSCHALCKX, M. (1999): A Primal Decomposition Method for the Integrated
Design of Multi-Period Production-Distribution Systems, in: IIE Transactions, Vol. 31
(1999), S. 1027-1036.
DOMSCHKE, W.; DREXL, A. (1996): Logistik – Standorte, 4. Aufl., München/Wien 1996.
DOMSCHKE, W.; DREXL, A. (2005): Einführung in Operations Research, 6. Aufl., Berlin et al.
2005.
DOMSCHKE, W.; SCHOLL, A. (2005): Grundlagen der Betriebswirtschaftslehre – Eine Einfüh-
rung aus entscheidungsorientierter Sicht, 3. Aufl., Berlin et al. 2005.
DREXL, A.; KOLISCH, R. (2000): Produktionsplanung bei Kundenauftragsfertigung, in:
Zeitschrift für Betriebswirtschaft, 70. Jg. (2000), S. 433-452.
DYCKHOFF, H. (2006): Produktionstheorie, 5. Aufl., Berlin et al. 2006.
DYCKHOFF, H.; SOUREN, R. (2008): Nachhaltige Unternehmensführung, Berlin et al. 2008.
EBERS, M.; GOTSCH W. (2006): Institutionenökonomische Theorien der Organisation, in:
KIESER, A.; EBERS, M. (Hrsg.): Organisationstheorien, 6. Aufl., Stuttgart 2006, S. 247-308.
EPPEN, G.; MARTIN, R.; SCHRAGE, L. (1989): A scenario approach to capacity planning, in:
Operations Research, Vol. 37 (1989), S. 517-527.
ERENGÜC, S.; SIMPSON, N.; VAKHARIA, A. (1999): Integrated production/distribution planning
in supply chains – An invited review, in: European Journal of Operational Research, Vol. 115
(1999), S. 219-236.
ERLEBACHER, R.; MELLER, D. (2000): The interaction of location and inventory in designing
distribution systems, in: IIE Transactions, Vol. 32 (2000), S. 155-166.
ERLENKOTTER, D. (1981): A comparative study of approaches to dynamic location problems,
in: European Journal of Operational Research, Vol. 6 (1981), S. 133-143.
253
ESCUDERO, L.; GALINDO, E.; GARCÍA, G.; GÓMEZ, E.; SABAU, V. (1999): Schumann, a
modeling framework for supply chain management under uncertainty, in: European Journal of
Operational Research, Vol. 119 (1999), S. 14-34.
ESKIGUN, E.; UZSOY, R.; PRECKEL, P.; BEAUJON, G.; KRISHNAN, S.; TEW, J. (2005): Outbound
supply chain network design with mode selection, lead times and capacitated vehicle distribu-
tion centers, in: European Journal of Operational Research, Vol. 165 (2005), S. 182-206.
FANDEL, G.; FEY, A.; HEUFT, B.; PITZ, T. (2004): Kostenrechnung, 2. Aufl., Berlin et al. 2004.
FANDEL, G.; GIESE, A.; RAUBENHEIMER, H. (2009): Supply Chain Management, Berlin et al.
2009.
FANDEL, G.; FISTEK, A.; STÜTZ, S. (2011): Produktionsmanagement, 2. Aufl., Berlin et al.
2011.
FARAHANI, R.; ABEDIAN, M.; SHARAHI, S. (2009): Dynamic Facility Location Problem, in:
FARAHANI, R.; HEKMATFAR, M. (Hrsg.): Facility Location, Berlin et al. 2009, S. 347-372.
FLEISCH, E. (2001): Das Netzwerkunternehmen, Berlin et al. 2001.
FLEISCHMANN, B.; FERBER, S.; HENRICH, P. (2006): Strategic Planning of BMW’s Global Pro-
duction Network, in: Interfaces, Vol. 36 (2006), S. 194-208.
FLEISCHMANN, B.; MEYR, H.; WAGNER, M. (2010): Advanced Planning, in: STADTLER, H.;
KILGER, C.; MEYR, H. (Hrsg.): Supply Chain Management und Advanced Planning, Berlin et
al. 2010, S. 89-122.
FLEISCHMANN, M. (2001): Quantitative Modells for Reverse Logistics, Berlin et al. 2001.
FÖRSTNER, K.; HENN, R. (1957): Dynamische Produktions-Theorie und Lineare Programmie-
rung, Meisenheim/Glan 1957.
254
GEOFFRION, A.; GRAVES, G. (1974): Multicommodity distribution system design by Benders
Decomposition, in: Management Science, Vol. 20 (1974), S. 822-844.
GEOFFRION, A.; POWERS, R. (1995): Twenty years of Strategic Distribution System Design:
An Evolutionary Perspective, in: Interfaces, Vol. 25 (1995), S. 105-127.
GEUNES, J. (2012): Demand Flexibility in Supply Chain Planning, New York et al. 2012.
GEUNES, J.; ROMEIJN, H.; TAAFFE, K. (2006): Requirements Planning with Pricing and Order
Selection Flexibility, in: Operations Research, Vol. 54 (2006), S. 394-401.
GEUNES, J.; SHEN, Z.; ROMEIJN, H. (2003): Economic Ordering Decisions with Market Choice
Flexibility, in: Naval Research Logistics, Vol. 51 (2004), S. 117-136.
GOETSCHALCKX, M.; VIDAL, C.; DOGAN, K. (2002): Modelling and design of global logistic
systems: A review of integrated strategic and tactical models and design algorithms, in: Euro-
pean Journal of Operational Research, Vol. 143 (2002), S. 1-18.
GOETSCHALCKX, M.; FLEISCHMANN, B. (2010): Strategic Network Design, in: STADTLER, H.;
KILGER, C.; MEYR, H. (Hrsg.): Supply Chain Management und Advanced Planning, Berlin et
al. 2010, S. 135-152.
GOH, M.; LIM, J.; MENG, F. (2007): A stochastic model for risk management in global supply
chain networks, in: European Journal of Operational Research, Vol. 182 (2007), S. 164-173.
GÖTZE, U. (2008): Investitionsrechnung, 6. Aufl., Berlin et al. 2008.
GRÜNIG, R.; KÜHN, R. (2006): Entscheidungsverfahren für komplexe Probleme, 2. Aufl.,
Berlin et al. 2006.
GUIDE, V.; NEERAJ, K.; NEWMAN, C.; VAN WASSENHOVE, L. (2005): Cellular telephone reuse
– the ReCellular Inc. case, in: FLAPPER, S.; VAN NUNEN, J.; VAN WASSENHOVE, L. (Hrsg.):
Managing Closed-Loop Supply Chains, Berlin et al. 2005, S. 151-156.
255
GUILLÉN, G.; MELE, F.; BAGAJEWICZ, M.; ESPUNA, A.; PUIGJANER, L. (2005): Multiobjective
supply chain design under uncertainty, in: Chemical Engineering Science, Vol. 60 (2005), S.
1535-1553.
GÜNTHER, H.-O.; TEMPELMEIER, H. (2012): Produktion und Logistik, 9. Aufl., Berlin et al.
2012.
GUTH, W. (1986): Chancen und Risiken von Auslandsinvestitionen, in: Zeitschrift für
betriebswirtschaftliche Forschung, 38. Jg. (1986), S. 183-194.
HAHN, G.; KUHN, H. (2012): Simultaneous investment, operations, and financial planning in
supply chains: A value-based optimization approach, in: International Journal of Production
Economics, Vol. 140 (2012), S. 559-569.
HAMMANN, P.; LOHRBERG, W. (1986): Beschaffungsmarketing, Stuttgart 1986.
HANSMANN, K. (1974): Entscheidungsmodelle zur Standortplanung der Industrieunternehmen,
Wiesbaden 1974.
HANSMANN, K. (2006): Industrielles Management, 8. Aufl., München 2006.
HAX, H. (1964): Investitions- und Finanzplanung mit Hilfe der linearen Programmierung, in:
Zeitschrift für betriebswirtschaftliche Forschung, 16. Jg. (1964), S. 430-446.
HEINEN, E. (1991): Industriebetriebslehre, 9. Aufl., Wiesbaden 1991.
HERING, T. (2008): Investitionstheorie, 3. Aufl., München 2008.
HINOJOSA, Y.; PUERTO, J.; FERNÁNDEZ, F. (2000): A multiperiod two-echelon multicom-
modity capacitated plant location problem, in: European Journal of Operational Research,
Vol. 123 (2000), S. 271-291.
256
HINOJOSA, Y.; KALCSICS J.; NICKEL, S.; PUERTO, J.; VELTEN, S. (2008): Dynamic supply chain
design with inventory, in: Computers & Operations Research, Vol. 35 (2008), S. 373-391.
HIRSHLEIFER, J. (1958): On the Theory of Optimal Investment Decision, in: The Journal of
Political Economy, Vol. 66 (1958), S. 329-352.
HO, W.; XU, X.; DEY, P. (2010): Multi-criteria decision making approaches for supplier
evaluation and selection – A literature review, in: European Journal of Operational Research,
Vol. 202 (2010), S. 16-24.
HONG, G.; PARK, C.; JANG, D.; RHO, H. (2005): An effective supplier selection method for
constructing a competitive supply-relationship, in: Expert Systems with Applications, Vol. 28
(2005), S. 629-639.
HUGO, A.; PISTIKOPOULOS, E. (2005): Environmentally conscious long-range planning and
design of supply chain networks, in: Journal of Cleaner Production, Vol. 13 (2005), S. 1471-
1491.
HWANG, H. (2002): Design of supply-chain logistics system considering service level, in:
Computers & Industrial Engineering, Vol. 43 (2002), S. 283-297.
JACOB, H. (1964): Neuere Entwicklungen in der Investitionsrechnung, in: Zeitschrift für Be-
triebswirtschaft, 34. Jg. (1964), S. 487-507.
JACOB, H. (1967): Zur Standortwahl der Unternehmungen, in: ALEWELL, K. (Hrsg.): Be-
triebswirtschaftliche Strukturfragen, Wiesbaden 1967, S. 233-293.
JACOB, H. (1993): Investitionsrechnung, in: JACOB, H. (Hrsg.): Allgemeine Betriebswirt-
schaftslehre, 5. Aufl., Wiesbaden 1993, S. 613-728.
JANG, Y.; JANG, S.; CHANG, B.; PARK, J. (2002): A combined model of network design and
production/distribution planning for a supply chain network, in: Computers & Industrial En-
gineering, Vol. 43 (2002), S. 263-281.
257
JAYARAMAN, V.; PIRKUL, H. (2001): Planning and coordination of production and distribution
facilities for multiple commodities, in: European Journal of Operational Research, Vol. 133
(2001), S. 394-408.
JAYARAMAN, V.; SRIVASTAVA, R.; BENTON, W. (1999): Supplier Selection and Order Quantity
Allocation – A Comprehensive Model, in: The Journal of Supply Chain Management, Vol. 35
(1999), S. 50-58.
JOST, P. (2000): Organisation und Koordination, Wiesbaden 2000.
KALLRATH, J. (2002): Gemischt-ganzzahlige Optimierung – Modellierung in der Praxis,
Braunschweig/Wiesbaden 2002.
KAUDER, S.; MEYR, H. (2009): Strategic network planning for an international automotive
manufacturer, in: OR Spectrum, Vol. 31 (2009), S. 507-532.
KELLER, S. (2004): Die Reduzierung des Bullwhip-Effektes, Wiesbaden 2004.
KERN, W. (1962): Die Messung industrieller Fertigungskapazitäten und ihrer Ausnutzung,
Köln et al. 1962.
KIESER, A.; WALGENBACH, P. (2007): Organisation, 5. Aufl., Stuttgart 2007.
KILGER, C.; WAGNER, M. (2010): Demand Planning, in: STADTLER, H.; KILGER, C.; MEYR, H.
(Hrsg.): Supply Chain Management und Advanced Planning, Berlin et al. 2010, S. 153-184.
KISTNER, K.-P.; STEVEN, M. (2001): Produktionsplanung, 3. Aufl., Heidelberg 2001.
KLIBI, W.; MARTEL, A.; GUITOUNI, A. (2010): The design of robust value-creating supply
chain networks – A critical review, in: European Journal of Operational Research, Vol. 203
(2010), S. 283-293.
KLOSE, A. (2001): Standortplanung in distributiven Systemen, Heidelberg 2001.
258
KLOSE, A.; DREXL, A. (2005): Facility location models for distribution systems design, in:
European Journal of Operational Research, Vol. 162 (2005), S. 4-29.
KOTLER, P.; ARMSTRONG, G. (2010): Principles of Marketing, 13. Aufl., London et al. 2010.
KOTLER, P.; KELLER, K.; BLIEMEL, F. (2007): Marketing-Management, 12. Aufl., München
2007.
KOUVELIS, P.; ROSENBLATT, M. (2002): A mathematical programming model for global sup-
ply chain management – Conceptual approach and managerial insights, in: GEUNES, J.;
PARDALOS, P.; ROMEIJN, H. (Hrsg.): Supply Chain Management – Models, Applications and
Research directions, Dordrecht et al. 2002, S. 245-277.
KRUSCHWITZ, L. (2011): Investitionsrechnung, 13. Aufl., München 2011.
KUTSCHKER, M.; SCHMID, S. (2008): Internationales Management, 6. Aufl., München 2008.
LARGE, R. (2009): Strategisches Beschaffungsmanagement, 4. Aufl., Wiesbaden 2009.
LEAMER, E. (1968): Locational Equilibria, in: Journal of Regional Science, Vol. 8 (1968), S.
229-242.
LEE, L.; PADMANABHAN, V.; WHANG, S. (1997): Information Distortion in a Supply Chain –
The Bullwhip Effect, in: Management Science, Vol. 43 (1997), S. 546-558.
LEE, Y.; KIM, S. (2002): Production-distribution planning in supply chain considering capacity
constraints, in: Computers & Industrial Engineering, Vol. 43 (2002), S. 169-190.
LI, H.; HENDRY, L.; TEUNTER, R. (2009): A strategic capacity allocation model for a complex
supply chain – Formulation and solution approach comparison, in: International Journal of
Production Economics, Vol. 121 (2009), S. 505-518.
LIECKENS, K.; VANDAELE, N. (2007): Reverse logistics network design with stochastic lead
times, in: Computers & Operations Research, Vol. 34 (2007), S. 395-416.
259
LIM, S.; KIM, Y. (1999): An integrated approach to dynamic plant location and capacity plan-
ning, in: Journal of the Operational Research Society, Vol. 50 (1999), S. 1205-1216.
LIN, J.; NOZICK, L.; TURNQUIST, M. (2006): Strategic design of distribution systems with
economies of scale in transportation, in: Annals of Operations Research, Vol. 144 (2006), S.
161-180.
LISTES, O. (2007): A generic stochastic model for supply-and-return network design, in:
Computers & Operations Research, Vol. 34 (2007), S. 417-442.
LIU, K.; ZHOU, Y.; ZHANG, Z. (2010): Capacitated location model with online demand pooling
in a multi-channel supply chain, in: European Journal of Operational Research, Vol. 207
(2010), S. 218-231.
LOVE, R.; MORRIS, J.; WESOLOWSKY, G. (1988): Facilities location, New York 1988.
LU, Z.; BOSTEL, N. (2007): A facility location model for logistic systems including reverse
flows – The case of remanufacturing activities, in: Computers & Operations Research, Vol.
34 (2007), S. 299-323.
LÜDER, K. (1982): Strategische Standortplanung transnationaler industrieller Großunterneh-
men, in: LÜCK, W.; TROMMSDORFF, V. (Hrsg.): Internationalisierung der Unternehmung,
Berlin 1982, S. 415-438.
MA, H.; DAVIDRAJUH, R. (2005): An iterative approach for distribution chain design in agile
virtual environment, in: Industrial Management and Data Systems, Vol. 105 (2005), S. 815-
834.
MACHARZINA, K.; WOLF, J. (2005): Unternehmensführung, 5. Aufl., Wiesbaden 2005.
MALLIK, S.; HARKER, P. (2004): Coordinating supply chains with competition – Capacity al-
location in semiconductor manufacturing, in: European Journal of Operational Research, Vol.
159 (2004), S. 330-347.
260
MASSMANN, M. (2006): Kapazitierte stochastisch-dynamische Facility-Location-Planung,
Wiesbaden 2006.
MATSCHKE, M.; HERING, T.; KLINGELHÖFER, H. (2002): Finanzanalyse und Finanzplanung,
München et al. 2002.
MEFFERT, H.; BURMANN, C.; KIRCHGEORG, M. (2008): Marketing – Grundlagen marktorien-
tierter Unternehmensführung, 10. Aufl., Wiesbaden 2008.
MEIXELL, M.; GARGEYA, V. (2005): Global supply chain design – A literature review and
critique, in: Transportation Research Part E, Vol. 41 (2005), S. 531-550.
MELACHRINOUDIS, E.; MIN, H. (2007): Redesigning a warehouse network, in: European Jour-
nal of Operational Research, Vol. 176 (2007), S. 210-229.
MELKOTE, S.; DASKIN, M. (2001): Capacitated facility location/network design problems, in:
European Journal of Operational Research, Vol. 129 (2001), S. 481-495.
MELO, M.; NICKEL, S.; SALDANHA-DA-GAMA, F. (2005): Dynamic multi-commodity capaci-
tated facility location – a mathematical modeling framework for strategic supply chain plan-
ning, in: Computers & Operations Research, Vol. 33 (2005), S. 181-208.
MELO, M.; NICKEL S.; SALDANHA-DA-GAMA, F. (2009): Facility location and supply chain
management – A review, in: European Journal of Operational Research, Vol. 196 (2009), S.
401-412.
MELZER-RIDINGER, R. (2008): Materialwirtschaft und Einkauf, 5. Aufl., München 2008.
MENDOZA, A.; VENTURA, J. (2008): An effective method to supplier selection and order
quantity allocation, in: International Journal of Business and Systems Research, Vol. 2
(2008), S. 1-15.
MEYR, H.; STADTLER, H. (2010): Supply Chain Typen, in: STADTLER, H.; KILGER, C.; MEYR,
H. (Hrsg.): Supply Chain Management and Advanced Planning, Berlin et al. 2010, S. 69-88.
261
MEYR, H.; WAGNER, M.; ROHDE, J. (2010): Struktur der Advanced Planning Systeme, in:
STADTLER, H.; KILGER, C.; MEYR, H. (Hrsg.): Supply Chain Management and Advanced
Planning, Berlin et al. 2010, S. 125-133.
MIRANDA, P.; GARRIDO, R. (2004): Incorporating inventory control decisions into a strategic
distribution network design model with stochastic demand, in: Transportation Research Part
E, Vol. 40 (2004), S. 183-207.
MIRANDA, P.; GARRIDO, R. (2008): Valid inequalities for Lagrangian relaxation in an inven-
tory location problem with stochastic capacity, in: Transportation Research Part E, Vol. 44
(2008), S. 47-65.
MIRCHANDANI, P.; OUDJIT, A.; WONG, R. (1985): Multidimensional extensions and a nested
dual approach for the m-median-problem, in: European Journal of Operational Research, Vol.
21 (1985), S. 121-137.
MODARRES, M.; SHARIFYAZDI, M. (2009): Revenue management approach to stochastic
capacity allocation problem, in: European Journal of Operational Research, Vol. 192 (2009),
S. 442-459.
MURALIDHARAN, C.; ANANTHARAMAN, N. (2002): A Multi-Criteria Group Decisionmaking
Model for Supplier Rating, in: The Journal of Supply Chain Management, Vol. 38 (2002), S.
22-33.
NEBL, T. (2007): Produktionswirtschaft, 6. Aufl., München/Wien 2007.
NICKEL, S.; VELTEN, S.; WEIMERSKIRCH, G. (2005): Strategische Supply-Chain Entscheidun-
gen in der Stahlindustrie – Eine Fallstudie, in: GÜNTHER, H.-O.; MATTFELD, D.; SUHL, L.
(Hrsg.): Supply Chain Management und Logistik, Heidelberg 2005, S. 157-177.
NOZICK, L.; TURNQUIST, M. (1998): Integrating inventory impacts into a fixed-charge model
for locating distribution centers, in: Transportation Research Part E: Logistics and Transporta-
tion Review, Vol. 34 (1998), S. 173-186.
262
OUHIMMOU, M.; D’AMOURS, S.; BEAUREGARD, R.; AIT-KADI, D.; SINGH CHAUHAN, S. (2008):
Furniture supply chain tactical planning optimization using a time decomposition approach,
in: European Journal of Operational Research, Vol. 189 (2008), S. 952-970.
OWEN, S.; DASKIN, M. (1998): Strategic facility location – A review, in: European Journal of
Operational Research, Vol. 111 (1998), S. 423-447.
PEPELS, W. (2009): Handbuch des Marketing, 5. Aufl., München 2009.
PERRIDON, L.; STEINER, M.; RATHGEBER, A. (2009): Finanzwirtschaft der Unternehmung, 15.
Aufl., München 2009.
PFOHL, H. (2010): Logistiksysteme, 8. Aufl., Berlin et al. 2010.
PICOT, A.; REICHWALD, R.; WIGAND, R. (2003): Die grenzenlose Unternehmung, 5. Aufl.,
Wiesbaden 2003.
PIRKUL, H.; JAYARAMAN, V. (1998): A multi-commodity, multi-plant, capacitated facility lo-
cation problem: Formulation and efficient heuristic solution, in Computers & Operations Re-
search, Vol. 25 (1998), S. 869-878.
RATLIFF, H.; NULTY, W. (1997): Logistics composite modelling, in: ARBITA, A.;
ELMAGHRABY, S. (Hrsg.): The Planning and Scheduling of Production Systems, London 1997,
S. 10-53.
REMMERBACH, K. (2005): Strategieentwicklung – Marktstrategie als Basis für zielorientierte
Innovationsprojekte, in: SCHÄPPI, B.; ANDREASEN, M.; KIRCHGEORG, M.; RADERMACHER, F.
(Hrsg.): Handbuch Produktentwicklung, München 2005, S. 195-220.
REVELLE, C.; EISELT, H.; DASKIN, M. (2008): A bibliography for some fundamental problem
categories in discrete location science, in: European Journal of Operational Research, Vol.
184 (2008), S. 817-848.
263
ROHDE, J.; WAGNER, M. (2010): Master Planning, in: STADTLER, H.; KILGER, C.; MEYR, H.
(Hrsg.): Supply Chain Management and Advanced Planning, Berlin et al. 2010, S. 185-205.
ROMEIJN, H.; SHU, J.; TEO, C. (2007): Designing two-echelon supply networks, in: European
Journal of Operational Research, Vol. 178 (2007), S. 449-462.
RÜSCHENPÖHLER, H. (1958): Der Standort industrieller Unternehmen als betriebswirtschaftli-
ches Problem, Berlin 1958.
SABRI, E.; BEAMON, B. (2000): A multi-objective approach to simultaneous strategic and
operational planning in supply chain design, in: Omega, Vol. 28 (2000), S. 581-598.
SADJADY, H.; DAVOUDPOUR, H. (2012): Two-echelon, multi-commodity supply chain net-
work design with mode selection, lead-times and inventory costs, in: Computers & Operations
Research, Vol. 39 (2012), S. 1345-1354.
SANTOSO, T.; AHMED, S.; GOETSCHALCKX, M.; SHAPIRO, A. (2005): A stochastic program-
ming approach for supply chain network design under uncertainty, in: European Journal of
Operational Research, Vol. 167 (2007), S. 96-115.
SARKAR, A.; MOHAPATRA, P. (2006): Evaluation of supplier capability and performance
– A method for supply base reduction, in: Journal of Purchasing & Supply Management, Vol.
12 (2006), S. 148-163.
SARKIS, J.; TALLURI, S. (2002): A Model for Strategic Supplier Selection, in: The Journal of
Supply Chain Management, Vol. 38 (2002), S. 18-28.
SCHILLING, D.; JAYARAMAN, V.; BARKHI, R. (1993): A review of covering problems in facility
location, in: Location Science, Vol. 1 (1993), S. 25-55.
SCHMID, S. (2005): Kooperation – Erklärungsperspektiven interaktionstheoretischer Ansätze,
in: ZENTES, J.; SWOBODA, B.; MORSCHETT, D. (Hrsg.): Kooperationen, Allianzen und Netz-
werke, 2. Aufl., Wiesbaden 2005, S. 235-256.
264
SCHNEIDER, D.; MÜLLER, R. (1989): Datenbankgestützte Marktselektion, Stuttgart 1989.
SCHOLL, A. (2001): Robuste Planung und Optimierung, Heidelberg 2001.
SCHÖNSLEBEN, P. (2007): Integrales Logistikmanagement, 5. Aufl., Berlin et al. 2007.
SCHULTE, C. (2009): Logistik, 5. Aufl., München 2009.
SCHULTE, G. (1996): Material- und Logistikmanagement, München/Wien 1996.
SEIBOLD, M. (2004): Absatzcontrolling, Düsseldorf 2004.
SEURING, S. (2003): Strategic Supply Chain Management – From Focused Factories to Fo-
cused Supply Chains, in: SEURING, S.; MÜLLER, M.; GOLDBACH, M.; SCHNEIDEWIND, U.
(Hrsg.): Strategy and Organization in Supply Chains, Heidelberg 2003, S. 181-196.
SEYDEL, J. (2006): Data envelopment analysis for decision support, in: Industrial Management
& Data Systems, Vol. 106 (2006), S. 81-95.
SHEN, Z. (2006): A profit-maximizing supply chain network design model with demand
choice flexibility, in: Operations Research Letters, Vol. 34 (2006), S. 673-682.
SHEN, Z.; COULLARD, C.; DASKIN, M. (2003): A joint inventory-location model, in:
Transportation Science, Vol. 37 (2003), S. 40-55.
SHEN, Z.; QI, L. (2007): Incorporating inventory and routing costs in strategic location models,
in: European Journal of Operational Research, Vol. 179 (2007), S. 372-389.
SHU, J.; TEO, C.; SHEN, Z. (2005): Stochastic Transportation-Inventory Network Design
Problem, in: Operations Research, Vol. 53 (2005), S. 48-60.
SIMCHI-LEVI, D.; KAMINSKY, P.; SIMCHI-LEVI, E. (2008): Designing and managing the supply
chain, 3. Aufl., Boston et al. 2008.
265
SNYDER, L.; DASKIN, M.; TEO, C. (2007): The stochastic location model with risk pooling, in:
European Journal of Operational Research, Vol. 179 (2007), S. 1221-1238.
SOURIRAJAN, K.; OZSEN, L.; UZSOY, R. (2007): A single-product network design model with
lead time and safety stock considerations, in: IIE Transactions, Vol. 39 (2007), S. 411-424.
SPECHT, G. (1988): Distributionsmanagement, Stuttgart 1988.
SRIVASTAVA, S. (2008): Network design for reverse logistics, in: Omega, Vol. 36 (2008), S.
535-548.
STADTLER, H. (2007): A general quantity discount and supplier selection mixed integer pro-
gramming model, in: OR Spectrum, Vol. 29 (2007), S. 723-744.
STADTLER, H. (2010): Supply Chain Management – Ein Überblick, in: STADTLER, H.; KILGER,
C.; MEYR, H. (Hrsg.): Supply Chain Management and Advanced Planning, Berlin et al. 2010,
S. 7-37.
STEINRÜCKE, M. (1997): Fuzzy Sets und ihre konzeptionelle Anwendung in der Produk-
tionsplanung, Wiesbaden 1997.
STEINRÜCKE, M. (2011a): Integrierte Produktions-, Distributions- und Terminplanung in glo-
balen Supply Chains, in: Zeitschrift für betriebswirtschaftliche Forschung, 63. Jg. (2011), S.
19-46.
STEINRÜCKE, M. (2011b): An approach to integrate production-transportation planning and
scheduling in an aluminium supply chain network, in: International Journal of Production
Research, Vol. 49 (2011), S. 6559-6583.
STEINRÜCKE, M.; ALBRECHT, W. (2011): Standortplanung in Distributionsnetzwerken
mit strafkostenabhängiger unvollständiger Nachfragedeckung, in: Wirtschaftswissenschaftli-
ches Studium, 40. Jg. (2011), S. 172-178.
266
STEINRÜCKE, M.; JAHR, M. (2012): Tactical planning in supply chain networks with customer
oriented single sourcing, in: The International Journal of Logistics Management, Vol. 23
(2012), S. 259-279.
STEVEN, M.; KRÜGER, R. (2004): Advanced Planning Systems – Grundlagen, Funktionalitä-
ten, Anwendungen, in: BUSCH, A.; DANGELMAIER, W. (Hrsg.): Integriertes Supply Chain Ma-
nagement, 2. Aufl., Wiesbaden 2004, S. 171-188.
SÜRIE, C.; WAGNER, M. (2010): Analyse der Supply Chain, in: STADTLER, H.; KILGER, C.;
MEYR, H. (Hrsg.): Supply Chain Management and Advanced Planning, Berlin et al. 2010, S.
39-68.
SWOBODA, P. (1965): Die simultane Planung von Rationalisierungs- und Erweiterungsinvesti-
tionen und von Produktionsprogrammen, in: Zeitschrift für Betriebswirtschaft, 35. Jg. (1965),
S. 148-163.
SYAM, S. (2002): A model and methodologies for the location problem with logistical
components, in: Computers & Operations Research, Vol. 29 (2002), S. 1173-1193.
SYDOW, J. (1992): Strategische Netzwerke – Evolution und Organisation, Wiesbaden 1992.
SYDOW, J.; MÖLLERING, G. (2009): Produktion in Netzwerken, 2. Aufl., München 2009.
TAAFFE, K.; GEUNES, J. (2004): Models for integrated customer order selection and require-
ments planning under limited production capacity, in: PARDALOS, P.; MIGDALAS, A.;
BAOURAKIS, G. (Hrsg.): Supply Chain and Finance, Singapore et al. 2004, S. 315-344.
TAAFFE, K.; GEUNES, J.; ROMEIJN, H. (2008): Target market selection and marketing effort
under uncertainty – The selective newsvendor, in: European Journal of Operational Research,
Vol. 189 (2008), S. 987-1003.
TALLURI, S.; BAKER, R. (2002): A multi-phase mathematical programming approach for
effective supply chain design, in: European Journal of Operational Research, Vol. 141 (2002),
S. 544-558.
267
TALLURI, S.; NARASIMHAN, R. (2005): A Methodology for Supply Base Optimization, in:
IEEE Transactions on Engineering Management, Vol. 52 (2005), S. 130-139.
TEMPELMEIER, H. (2001): Master Planning mit Advanced Planning Systems, Erftstadt 2001.
TEO, C.; SHU, J. (2004): Warehouse-retailer network design problem, in: Operations Research,
Vol. 52 (2004), S. 396-408.
THANH, P.; BOSTEL, N.; PÉTON, O. (2008): A dynamic model for facility location in the design
of complex supply chains, in: International Journal of Production Economics, Vol. 113
(2008), S. 678-693.
TRUONG, T.; AZADIVAR, F. (2005): Optimal design methodologies for configuration of supply
chains, in: International Journal of Production Research, Vol. 43 (2005), S. 2217-2236.
ULSTEIN, N.; CHRISTIANSEN, M.; GRONHAUG, R.; MAGNUSSEN, N.; SOLOMON, M. (2006):
Elkem Uses Optimization in Redesigning Its Supply Chain, in: Interfaces, Vol. 36 (2006), S.
314-325.
VAHRENKAMP, R. (2005): Logistik, 5. Aufl., München 2005.
VAHRENKAMP, R. (2008): Produktionsmanagement, 6. Aufl., München 2008.
VAHRENKAMP, R.; MATTFELD, D. (2007): Logistiknetzwerke, 1. Aufl., Wiesbaden 2007.
VAN OMMEREN, J.; BUMB, A.; SLEPTCHENKO, A. (2006): Locating repair shops
in a stochastic environment, in: Computers & Operations Research, Vol. 33 (2006), S. 1575-
1594.
VAN ROY, T.; ERLENKOTTER, D. (1982): A Dual-Based Procedure for Dynamic Facility
Location, in: Management Science, Vol. 28 (1982), S. 1091-1105.
VERTER, V.; DASCI, A. (2002): The plant location and flexible technology acquisition
problem, in: European Journal of Operational Research, Vol. 136 (2002), S. 366-382.
268
VIDAL, C.; GOETSCHALCKX, M. (1997): Strategic production-distribution models – A critical
review with emphasis on global supply chain models, in: European Journal of Operational
Research, Vol. 98 (1997), S. 1-18.
VILA, D.; MARTEL, A.; BEAUREGARD, R. (2006): Designing logistics networks in divergent
process industries – A methodology and its application to the lumber industry, in: Interna-
tional Journal of Production Economics, Vol. 102 (2006), S. 358-378.
VOLLMANN, T.; CORDON, C. (1998): Building Successful Customer-Supplier Alliances, in:
Long Range Planning, Vol. 31 (1998), S. 684-694.
WADHWA, V.; RAVINDRAN, A. (2007): Vendor selection in outsourcing, in: Computers &
Operations Research, Vol. 34 (2007), S. 3725-3737.
WALKER, O.; BOYD, H.; LARRÉCHÉ, J. (1996): Marketing Strategy – Planning and
Implementation, 2. Aufl., Chicago et al. 1996.
WANG, Q.; BATTA, R.; BHADURY, J.; RUMP, C. (2003): Budget constrained location
problem with opening and closing of facilities, in: Computers & Operations Research, Vol. 30
(2003), S. 2047-2069.
WANG, Z.; YAO, D.; HUANG, P. (2007): A new location-inventory policy with reverse logistics
applied to B2C e-markets of China, in: International Journal of Production Economics, Vol.
107 (2007), S. 350-363.
WEBER, A. (1909): Über den Standort der Industrien – Erster Teil, Reine Theorie des Stand-
orts, Tübingen 1909.
WEBER, K. (1999): Industriebetriebslehre, 2. Aufl., Berlin et al. 1999.
WEINGARTNER, H. (1963): Mathematical Programming and the Analysis of Capital
Budgeting Problems, Englewood Cliffs 1963.
269
WERNER, H. (2010): Supply Chain Management – Grundlagen, Strategien, Instrumente und
Controlling, 4. Aufl., Wiesbaden 2010.
WILDEMANN, H. (1998): Die modulare Fabrik, 5. Aufl., München 1998.
WILHELM, W.; LIANG, D.; RAO, B.; WARRIER, D.; ZHU, X.; BULUSU, S. (2005): Design of in-
ternational assembly systems and their supply chains under NAFTA, in: Transportation Re-
search Part E, Vol. 41 (2005), S. 467-493.
WOUDA, F.; VAN BEEK, P.; VAN DER VORST, J.; TACKE, H. (2002): An application of mixed-
integer linear programming models of the redesign of the supply network of Nutricia Dairy &
Drinks Group in Hungary, in: OR Spectrum, Vol. 24 (2002), S. 449-465.
YAN, H.; YU, Z.; CHENG, E. (2003): A strategic model for supply chain design with logical
constraints – formulation and solution, in: Computers & Operations Research, Vol. 30 (2003),
S. 2135-2155.
YAO, Z.; LEE, L.; JARUPHONGSA, W.; TAN, V.; HUI, C. (2010): Multi-source facility location-
allocation and inventory problem, in: European Journal of Operational Research, Vol. 207
(2010), S. 750-762.
YILDIZ, H.; RAVI, R.; FAIREY, W. (2010): Integrated optimization of customer and supplier
logistics at Robert Bosch LLC, in: European Journal of Operational Research, Vol. 207
(2010), S. 456-464.
ZÄPFEL, G. (2000a): Strategisches Produktions-Management, 2. Aufl., München/Wien 2000.
ZÄPFEL, G. (2000b): Taktisches Produktions-Management, 2. Aufl., München/Wien 2000.
271
Rechtsquellenverzeichnis
Gesetz über das Inverkehrbringen, die Rücknahme und die umweltverträgliche Entsorgung
von Elektro- und Elektronikgeräten (Elektro- und Elektronikgerätegesetz) vom 16. März 2005
(Bundesgesetzblatt I S. 762), das durch Artikel 3 des Gesetzes vom 24. Februar 2012 (Bun-
desgesetzblatt I S. 212) geändert worden ist.
Gesetz zur Förderung der Kreislaufwirtschaft und Sicherung der umweltverträglichen Besei-
tigung von Abfällen (Kreislaufwirtschafts- und Abfallgesetz) vom 27. September 1994 (Bun-
desgesetzblatt I S. 2705).
W. Albrecht, Integrierte Netzwerk- und Liquiditätsplanung von Supply Chains,DOI 10.1007/978-3-658-06801-1, © Springer Fachmedien Wiesbaden 2014