Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Type of Cells (Black) Polycrystalline
Brand Modules Suntech
Maximum Power 60 Wp
Open circuit voltage (Voc) 10V
Short-circuit (Isc) 8.04 A
Maximum Power Voltage (Vmp) 8 V
Current at Maximum Power (Imp) 7.51 A
Module Performance (%) 12.83%
Number of Cells per Module 16
Cell Dimensions 156 mm x 156 mm
Panel Dimensions (overall) 1377mm x 475mm
Working Width (variable) 1340mm to 1360mm
Panel Gauge (variable) 375mm to 350mm
Panel Weight 7kg
Encapsulation of photovoltaic Tedlar Dark Glass
Accuracy of performance data -3% / +5%
Ambient operating temperature -40°C to +85 °C
Thermal coefficients for = 0.055% / °C
= -0.34% / °C
= -0.47% / °C
AA TECHNICAL CHARACTERISTICS
Imerys PVt Ti le – Technical Summary
Tel 0161 928 4572 Facsimile 0161 929 8513Email [email protected]
Website www.imerys-rooftiles.comImerys Roof Tiles, Toekomststraat 18, B-9800 Deinze, Belgium
All information provided is as a guide only and does not form a part of any contract. All Dimensions, prices and specifications are subject to change without notice.
ASSOCIATE MEMBER
Imerys P V t Plot Design Service
Whilst the PVt Solar Panels are designed to beinstalled by your roofing contractor in conjunctionwith the standard battens used for the surroundingtile, the electrical connection should be undertakenby an M.C.S. (Microgeneration Certification Scheme)accredited PV installer.
The clever one-piece interlocking designmakes the PVt quick and easy to install. Please refer to the Installation Guide on theImerys website
1 Slot together PV tiles
2 Screw to batten
3 Push-fit cables
NB – Grid connection requires M.C.S.accredited installation. For more information,please contact Imerys Roof Tiles.
Please note that the roof tiles which immediatelysurround each PVt panel should be mechanically fixedto their supporting batten.
Typical batten for the HP10 tile: 25x50mm, nail size 50x3mm
1 2
3
BS EN ISO 14001:2004Environmental
management system
BS EN ISO 1304:1998
Welcomed by Planners, attractive to Homebuyers
Gain a planning advantage and reduce energy costs
The Imerys PVt 60 Photovoltaic Tile
Innovation for Sustainable Homes
AA INSTALLATION OF PVt SOLAR PANELS
AA FROM SITE PLAN... AA ...TO INDIVIDUAL PLOT DESIGN
Distributed by
The ecological advantages of solar power – a clean,renewable energy source with a high level of reliability –are widely appreciated.
Integrated Imerys solar panels comprise linked siliconcells which transform sunlight into electricity which is converted to A.C. by means of an inverter. Thiselectricity is available for use by the householder or for sale to your chosen electricity supplier.
AA CONCEPT
Integrate a susta inable advantage
New homebuyers are becoming increasingly conscious ofenergy costs and are attracted to homes that produce their ownrenewable electricity. By installing Imerys PVt tiles, housebuildersnot only reduce running costs for new owners but also provide avery desirable renewable technology that can help increase thevalue of homes by up to 10%* for an increased investment ofapproximately 4%.* Energy Saving Trust
Imerys PVt shown with traditional clay plain tiles
Roof tile featured: HP10 Slate, courtesy Crest Nicholson
AA A SUSTAINABLE HOMES ADVANTAGE
AA ADDING VALUEWITH A COST-SAVING INVESTMENT
As planning guidelines become more onerous, the use ofrenewable technology is becoming desirable for everybuilder and developer in the country. Because ImerysPVt tiles are discreetly integrated into the roof, they areoften approved by Local Authority Planners where otherrenewable energy options have been consideredunsuitable. The PVt is especially useful on sensitive sitesand even in conservation areas.
AA A PLANNING ADVANTAGE
When used in conjunction with tiles from the Imerys range ofnatural clay rooftiles, these PVt tiles create the ultimatesustainable roof system. Under the Code for Sustainable Homesthey can help you achieve credits for both renewable electricityand roofing materials thanks to the low embodied energy ratingof natural clay. Clay roof tiles have received a BRE ‘A’ ratingdenoting their low environmental impact, providing an excellentsustainable resource welcomed by local authority planners.
For full compatibility details please refer to the ProductSelector or our website – www.imerys-rooftiles.com.
Beautifully discreetPVt tiles integrate superbly into the roofline, makingthem almost indistinguishable from the surrounding tilessuch as HP 10 slate.
Powerful and adaptable 60 Watts per PVtA standard 1.08kWp system consists of 18 tiles and covers 9m2.
The ultimate sustainable roofRenewable solar electricity and natural clay tiles combineto create the ultimate sustainable roofing system.Naturally, clay tiles have lower embodied energy costs thanmost other roofing materials. Imerys complies with BS ENISO 14001:2004 Environmental Management Systems.
WarrantyThe PVt has a market-leading warranty;
• PV output minimum 80% output is guaranteed for 25 years• Anti-corrosion and watertightness are guaranteed for
30 years when installed with compatible tiles from theImerys range, which are themselves guaranteed inrespect of durability for 30 years.
Outstanding value The PVt is as competitively priced as any PV tile on themarket – call us to discuss your requirements. Attractivefeed-in tariffs apply from the 1st April 2010, and start at£0.361 per unit generated from new new-build PVinstallations of less than 4kW.
AA THE BENEFITS
1 Panne H2 2 Panne ‘S’ 3 HP 10 4 Omega 13 5 Diamant6 Monopole 7 Beauvoise 8 HP 20 9 Phalempin 10 Jacob 20
1 2
35
6
8
9
As you would expect, the PVt integrates perfectly withmost clay roofing tiles from the extensive Imerys range.Included are large and small format interlocking tiles andan extensive portfolio of clay plain tiles for new buildand refurbishment projects.
AA COMPATIBILITY
10
All operation is automatic. As there are no moving parts, nomaintenance is required.
AA MAINTENANCE
Solar panels offer a pollution-free, silent and renewable sourceof electrical energy that does not use fossil or nuclear fuels.
AA GREEN ISSUES
The Photovoltaic Tile from Imerys
4
7
The perfect union of solar panels and tiles
When used in conjunction with Imerys clay roof tiles the Imerys PVt Solar Panels integrate perfectly anddiscreetly within the roof elevation. The waterproof panel frames are designed to interlock with each other andwith the surrounding tiles.The modular format of the Imerys PVt panels ensures its ease of application on a variety of installations – large and small.
AA THE IMERYS PVt
1 The solar tiles produce DC (Direct Current)electricity from the sun’s rays.
2 The inverter converts this electricity to AC(Alternating Current) identical to that of yourgrid supply.
3 Whilst this electricity is primarily for your ownconsumption, any surplus is sold to the grid.
AA ORIENTATION AND SHADING
Optimum performance is obtained from Imerys PVtpanels integrated into south-facing roof elevationsof 30 to 40°.
Wherever possible the effect of shade fromobstructions such as buildings, chimneys, dormers or trees should be avoided, as such masking willpartially reduce the effectiveness of the PV installation.
63 66 72 75 77 79 79 77 75 72 66 63
60 63 67 69 71 71 69 67 63 60 56
78 79 84 87 90 91 91 90 87 84 79 78
69 74 78 82 85 86 86 85 82 78 74 69
86 89 90 95 97 100 100 97 95 90 88 86
82 84 88 92 95 96 96 95 92 88 84 82
89 91 92 94 95 96 96 95 94 92 91 89
87 90 93 96 98 99 99 98 96 93 90 87
90 90 90 90 90 90 90 90 90 90 90 90
56
75° 60° 45° 30° 15° 0° 15° 30° 45° 60° 75° 90°90°
WEST SOUTH EAST
80°
60°
70°
40°
50°
20°
30°
0°
10°
90°
TIL
T A
NG
LE (
INC
LIN
AT
ION
)
Optimum Performance is obtained between 30-40° roof pitch on south facing elevations
Solar Tiles
8
10
16
18
20
24
32
36
42
45
52
64
kWp
0.48
0.60
0.96
1.08
1.20
1.44
1.92
2.16
2.52
2.70
3.12
3.84
kWh/annum*
408
510
816
918
1020
1224
1632
1836
2142
2295
2652
3264
CO2 Offset perannum(kg)**
232
290
463
521
579
695
927
1043
1217
1304
1506
1854
Roof Space(m2)***
4
5
8
9
10
12
16
18
21
22.5
26
32
AA PVt 60 SYSTEM SIZES AA A PRACTICAL SOLAR POWER SUPPLY FOR INDIVIDUAL HOMES
* Based on a unshaded south facing roof in the UK, generating 850 units per kWp. Pleasenote, the performance of solar PV systems is impossible to predict with any certainty dueto the variability in the amount of solar radiation (sunlight) from location to location andfrom year to year.
** Using SAP calculations, the C02 savings per kWh is taken at 0.568kg
*** Roof space is based on 350mm batten gauge. Numbers have been rounded to the nearest m2.
Roofing Installation by Russell & Russell of Lenham
AZIMUTH ANGLE (ORIENTATION)
SOLAR ENERGY CAPTURE vs ARRAY ORIENTATION & TILT
The ecological advantages of solar power – a clean,renewable energy source with a high level of reliability –are widely appreciated.
Integrated Imerys solar panels comprise linked siliconcells which transform sunlight into electricity which is converted to A.C. by means of an inverter. Thiselectricity is available for use by the householder or for sale to your chosen electricity supplier.
AA CONCEPT
Integrate a susta inable advantage
New homebuyers are becoming increasingly conscious ofenergy costs and are attracted to homes that produce their ownrenewable electricity. By installing Imerys PVt tiles, housebuildersnot only reduce running costs for new owners but also provide avery desirable renewable technology that can help increase thevalue of homes by up to 10%* for an increased investment ofapproximately 4%.* Energy Saving Trust
Imerys PVt shown with traditional clay plain tiles
Roof tile featured: HP10 Slate, courtesy Crest Nicholson
AA A SUSTAINABLE HOMES ADVANTAGE
AA ADDING VALUEWITH A COST-SAVING INVESTMENT
As planning guidelines become more onerous, the use ofrenewable technology is becoming desirable for everybuilder and developer in the country. Because ImerysPVt tiles are discreetly integrated into the roof, they areoften approved by Local Authority Planners where otherrenewable energy options have been consideredunsuitable. The PVt is especially useful on sensitive sitesand even in conservation areas.
AA A PLANNING ADVANTAGE
When used in conjunction with tiles from the Imerys range ofnatural clay rooftiles, these PVt tiles create the ultimatesustainable roof system. Under the Code for Sustainable Homesthey can help you achieve credits for both renewable electricityand roofing materials thanks to the low embodied energy ratingof natural clay. Clay roof tiles have received a BRE ‘A’ ratingdenoting their low environmental impact, providing an excellentsustainable resource welcomed by local authority planners.
For full compatibility details please refer to the ProductSelector or our website – www.imerys-rooftiles.com.
Beautifully discreetPVt tiles integrate superbly into the roofline, makingthem almost indistinguishable from the surrounding tilessuch as HP 10 slate.
Powerful and adaptable 60 Watts per PVtA standard 1.08kWp system consists of 18 tiles and covers 9m2.
The ultimate sustainable roofRenewable solar electricity and natural clay tiles combineto create the ultimate sustainable roofing system.Naturally, clay tiles have lower embodied energy costs thanmost other roofing materials. Imerys complies with BS ENISO 14001:2004 Environmental Management Systems.
WarrantyThe PVt has a market-leading warranty;
• PV output minimum 80% output is guaranteed for 25 years• Anti-corrosion and watertightness are guaranteed for
30 years when installed with compatible tiles from theImerys range, which are themselves guaranteed inrespect of durability for 30 years.
Outstanding value The PVt is as competitively priced as any PV tile on themarket – call us to discuss your requirements. Attractivefeed-in tariffs apply from the 1st April 2010, and start at£0.361 per unit generated from new new-build PVinstallations of less than 4kW.
AA THE BENEFITS
1 Panne H2 2 Panne ‘S’ 3 HP 10 4 Omega 13 5 Diamant6 Monopole 7 Beauvoise 8 HP 20 9 Phalempin 10 Jacob 20
1 2
35
6
8
9
As you would expect, the PVt integrates perfectly withmost clay roofing tiles from the extensive Imerys range.Included are large and small format interlocking tiles andan extensive portfolio of clay plain tiles for new buildand refurbishment projects.
AA COMPATIBILITY
10
All operation is automatic. As there are no moving parts, nomaintenance is required.
AA MAINTENANCE
Solar panels offer a pollution-free, silent and renewable sourceof electrical energy that does not use fossil or nuclear fuels.
AA GREEN ISSUES
The Photovoltaic Tile from Imerys
4
7
The perfect union of solar panels and tiles
When used in conjunction with Imerys clay roof tiles the Imerys PVt Solar Panels integrate perfectly anddiscreetly within the roof elevation. The waterproof panel frames are designed to interlock with each other andwith the surrounding tiles.The modular format of the Imerys PVt panels ensures its ease of application on a variety of installations – large and small.
AA THE IMERYS PVt
1 The solar tiles produce DC (Direct Current)electricity from the sun’s rays.
2 The inverter converts this electricity to AC(Alternating Current) identical to that of yourgrid supply.
3 Whilst this electricity is primarily for your ownconsumption, any surplus is sold to the grid.
AA ORIENTATION AND SHADING
Optimum performance is obtained from Imerys PVtpanels integrated into south-facing roof elevationsof 30 to 40°.
Wherever possible the effect of shade fromobstructions such as buildings, chimneys, dormers or trees should be avoided, as such masking willpartially reduce the effectiveness of the PV installation.
63 66 72 75 77 79 79 77 75 72 66 63
60 63 67 69 71 71 69 67 63 60 56
78 79 84 87 90 91 91 90 87 84 79 78
69 74 78 82 85 86 86 85 82 78 74 69
86 89 90 95 97 100 100 97 95 90 88 86
82 84 88 92 95 96 96 95 92 88 84 82
89 91 92 94 95 96 96 95 94 92 91 89
87 90 93 96 98 99 99 98 96 93 90 87
90 90 90 90 90 90 90 90 90 90 90 90
56
75° 60° 45° 30° 15° 0° 15° 30° 45° 60° 75° 90°90°
WEST SOUTH EAST
80°
60°
70°
40°
50°
20°
30°
0°
10°
90°
TIL
T A
NG
LE (
INC
LIN
AT
ION
)
Optimum Performance is obtained between 30-40° roof pitch on south facing elevations
Solar Tiles
8
10
16
18
20
24
32
36
42
45
52
64
kWp
0.48
0.60
0.96
1.08
1.20
1.44
1.92
2.16
2.52
2.70
3.12
3.84
kWh/annum*
408
510
816
918
1020
1224
1632
1836
2142
2295
2652
3264
CO2 Offset perannum(kg)**
232
290
463
521
579
695
927
1043
1217
1304
1506
1854
Roof Space(m2)***
4
5
8
9
10
12
16
18
21
22.5
26
32
AA PVt 60 SYSTEM SIZES AA A PRACTICAL SOLAR POWER SUPPLY FOR INDIVIDUAL HOMES
* Based on a unshaded south facing roof in the UK, generating 850 units per kWp. Pleasenote, the performance of solar PV systems is impossible to predict with any certainty dueto the variability in the amount of solar radiation (sunlight) from location to location andfrom year to year.
** Using SAP calculations, the C02 savings per kWh is taken at 0.568kg
*** Roof space is based on 350mm batten gauge. Numbers have been rounded to the nearest m2.
Roofing Installation by Russell & Russell of Lenham
AZIMUTH ANGLE (ORIENTATION)
SOLAR ENERGY CAPTURE vs ARRAY ORIENTATION & TILT
The ecological advantages of solar power – a clean,renewable energy source with a high level of reliability –are widely appreciated.
Integrated Imerys solar panels comprise linked siliconcells which transform sunlight into electricity which is converted to A.C. by means of an inverter. Thiselectricity is available for use by the householder or for sale to your chosen electricity supplier.
AA CONCEPT
Integrate a susta inable advantage
New homebuyers are becoming increasingly conscious ofenergy costs and are attracted to homes that produce their ownrenewable electricity. By installing Imerys PVt tiles, housebuildersnot only reduce running costs for new owners but also provide avery desirable renewable technology that can help increase thevalue of homes by up to 10%* for an increased investment ofapproximately 4%.* Energy Saving Trust
Imerys PVt shown with traditional clay plain tiles
Roof tile featured: HP10 Slate, courtesy Crest Nicholson
AA A SUSTAINABLE HOMES ADVANTAGE
AA ADDING VALUEWITH A COST-SAVING INVESTMENT
As planning guidelines become more onerous, the use ofrenewable technology is becoming desirable for everybuilder and developer in the country. Because ImerysPVt tiles are discreetly integrated into the roof, they areoften approved by Local Authority Planners where otherrenewable energy options have been consideredunsuitable. The PVt is especially useful on sensitive sitesand even in conservation areas.
AA A PLANNING ADVANTAGE
When used in conjunction with tiles from the Imerys range ofnatural clay rooftiles, these PVt tiles create the ultimatesustainable roof system. Under the Code for Sustainable Homesthey can help you achieve credits for both renewable electricityand roofing materials thanks to the low embodied energy ratingof natural clay. Clay roof tiles have received a BRE ‘A’ ratingdenoting their low environmental impact, providing an excellentsustainable resource welcomed by local authority planners.
For full compatibility details please refer to the ProductSelector or our website – www.imerys-rooftiles.com.
Beautifully discreetPVt tiles integrate superbly into the roofline, makingthem almost indistinguishable from the surrounding tilessuch as HP 10 slate.
Powerful and adaptable 60 Watts per PVtA standard 1.08kWp system consists of 18 tiles and covers 9m2.
The ultimate sustainable roofRenewable solar electricity and natural clay tiles combineto create the ultimate sustainable roofing system.Naturally, clay tiles have lower embodied energy costs thanmost other roofing materials. Imerys complies with BS ENISO 14001:2004 Environmental Management Systems.
WarrantyThe PVt has a market-leading warranty;
• PV output minimum 80% output is guaranteed for 25 years• Anti-corrosion and watertightness are guaranteed for
30 years when installed with compatible tiles from theImerys range, which are themselves guaranteed inrespect of durability for 30 years.
Outstanding value The PVt is as competitively priced as any PV tile on themarket – call us to discuss your requirements. Attractivefeed-in tariffs apply from the 1st April 2010, and start at£0.361 per unit generated from new new-build PVinstallations of less than 4kW.
AA THE BENEFITS
1 Panne H2 2 Panne ‘S’ 3 HP 10 4 Omega 13 5 Diamant6 Monopole 7 Beauvoise 8 HP 20 9 Phalempin 10 Jacob 20
1 2
35
6
8
9
As you would expect, the PVt integrates perfectly withmost clay roofing tiles from the extensive Imerys range.Included are large and small format interlocking tiles andan extensive portfolio of clay plain tiles for new buildand refurbishment projects.
AA COMPATIBILITY
10
All operation is automatic. As there are no moving parts, nomaintenance is required.
AA MAINTENANCE
Solar panels offer a pollution-free, silent and renewable sourceof electrical energy that does not use fossil or nuclear fuels.
AA GREEN ISSUES
The Photovoltaic Tile from Imerys
4
7
The perfect union of solar panels and tiles
When used in conjunction with Imerys clay roof tiles the Imerys PVt Solar Panels integrate perfectly anddiscreetly within the roof elevation. The waterproof panel frames are designed to interlock with each other andwith the surrounding tiles.The modular format of the Imerys PVt panels ensures its ease of application on a variety of installations – large and small.
AA THE IMERYS PVt
1 The solar tiles produce DC (Direct Current)electricity from the sun’s rays.
2 The inverter converts this electricity to AC(Alternating Current) identical to that of yourgrid supply.
3 Whilst this electricity is primarily for your ownconsumption, any surplus is sold to the grid.
AA ORIENTATION AND SHADING
Optimum performance is obtained from Imerys PVtpanels integrated into south-facing roof elevationsof 30 to 40°.
Wherever possible the effect of shade fromobstructions such as buildings, chimneys, dormers or trees should be avoided, as such masking willpartially reduce the effectiveness of the PV installation.
63 66 72 75 77 79 79 77 75 72 66 63
60 63 67 69 71 71 69 67 63 60 56
78 79 84 87 90 91 91 90 87 84 79 78
69 74 78 82 85 86 86 85 82 78 74 69
86 89 90 95 97 100 100 97 95 90 88 86
82 84 88 92 95 96 96 95 92 88 84 82
89 91 92 94 95 96 96 95 94 92 91 89
87 90 93 96 98 99 99 98 96 93 90 87
90 90 90 90 90 90 90 90 90 90 90 90
56
75° 60° 45° 30° 15° 0° 15° 30° 45° 60° 75° 90°90°
WEST SOUTH EAST
80°
60°
70°
40°
50°
20°
30°
0°
10°
90°
TIL
T A
NG
LE (
INC
LIN
AT
ION
)
Optimum Performance is obtained between 30-40° roof pitch on south facing elevations
Solar Tiles
8
10
16
18
20
24
32
36
42
45
52
64
kWp
0.48
0.60
0.96
1.08
1.20
1.44
1.92
2.16
2.52
2.70
3.12
3.84
kWh/annum*
408
510
816
918
1020
1224
1632
1836
2142
2295
2652
3264
CO2 Offset perannum(kg)**
232
290
463
521
579
695
927
1043
1217
1304
1506
1854
Roof Space(m2)***
4
5
8
9
10
12
16
18
21
22.5
26
32
AA PVt 60 SYSTEM SIZES AA A PRACTICAL SOLAR POWER SUPPLY FOR INDIVIDUAL HOMES
* Based on a unshaded south facing roof in the UK, generating 850 units per kWp. Pleasenote, the performance of solar PV systems is impossible to predict with any certainty dueto the variability in the amount of solar radiation (sunlight) from location to location andfrom year to year.
** Using SAP calculations, the C02 savings per kWh is taken at 0.568kg
*** Roof space is based on 350mm batten gauge. Numbers have been rounded to the nearest m2.
Roofing Installation by Russell & Russell of Lenham
AZIMUTH ANGLE (ORIENTATION)
SOLAR ENERGY CAPTURE vs ARRAY ORIENTATION & TILT
Type of Cells (Black) Polycrystalline
Brand Modules Suntech
Maximum Power 60 Wp
Open circuit voltage (Voc) 10V
Short-circuit (Isc) 8.04 A
Maximum Power Voltage (Vmp) 8 V
Current at Maximum Power (Imp) 7.51 A
Module Performance (%) 12.83%
Number of Cells per Module 16
Cell Dimensions 156 mm x 156 mm
Panel Dimensions (overall) 1377mm x 475mm
Working Width (variable) 1340mm to 1360mm
Panel Gauge (variable) 375mm to 350mm
Panel Weight 7kg
Encapsulation of photovoltaic Tedlar Dark Glass
Accuracy of performance data -3% / +5%
Ambient operating temperature -40°C to +85 °C
Thermal coefficients for = 0.055% / °C
= -0.34% / °C
= -0.47% / °C
AA TECHNICAL CHARACTERISTICS
Imerys PVt Ti le – Technical Summary
Tel 0161 928 4572 Facsimile 0161 929 8513Email [email protected]
Website www.imerys-rooftiles.comImerys Roof Tiles, Toekomststraat 18, B-9800 Deinze, Belgium
All information provided is as a guide only and does not form a part of any contract. All Dimensions, prices and specifications are subject to change without notice.
ASSOCIATE MEMBER
Imerys P V t Plot Design Service
Whilst the PVt Solar Panels are designed to beinstalled by your roofing contractor in conjunctionwith the standard battens used for the surroundingtile, the electrical connection should be undertakenby an M.C.S. (Microgeneration Certification Scheme)accredited PV installer.
The clever one-piece interlocking designmakes the PVt quick and easy to install. Please refer to the Installation Guide on theImerys website
1 Slot together PV tiles
2 Screw to batten
3 Push-fit cables
NB – Grid connection requires M.C.S.accredited installation. For more information,please contact Imerys Roof Tiles.
Please note that the roof tiles which immediatelysurround each PVt panel should be mechanically fixedto their supporting batten.
Typical batten for the HP10 tile: 25x50mm, nail size 50x3mm
1 2
3
BS EN ISO 14001:2004Environmental
management system
BS EN ISO 1304:1998
Welcomed by Planners, attractive to Homebuyers
Gain a planning advantage and reduce energy costs
The Imerys PVt 60 Photovoltaic Tile
Innovation for Sustainable Homes
AA INSTALLATION OF PVt SOLAR PANELS
AA FROM SITE PLAN... AA ...TO INDIVIDUAL PLOT DESIGN
Distributed by
Type of Cells (Black) Polycrystalline
Brand Modules Suntech
Maximum Power 60 Wp
Open circuit voltage (Voc) 10V
Short-circuit (Isc) 8.04 A
Maximum Power Voltage (Vmp) 8 V
Current at Maximum Power (Imp) 7.51 A
Module Performance (%) 12.83%
Number of Cells per Module 16
Cell Dimensions 156 mm x 156 mm
Panel Dimensions (overall) 1377mm x 475mm
Working Width (variable) 1340mm to 1360mm
Panel Gauge (variable) 375mm to 350mm
Panel Weight 7kg
Encapsulation of photovoltaic Tedlar Dark Glass
Accuracy of performance data -3% / +5%
Ambient operating temperature -40°C to +85 °C
Thermal coefficients for = 0.055% / °C
= -0.34% / °C
= -0.47% / °C
AA TECHNICAL CHARACTERISTICS
Imerys PVt Ti le – Technical Summary
Tel 0161 928 4572 Facsimile 0161 929 8513Email [email protected]
Website www.imerys-rooftiles.comImerys Roof Tiles, Toekomststraat 18, B-9800 Deinze, Belgium
All information provided is as a guide only and does not form a part of any contract. All Dimensions, prices and specifications are subject to change without notice.
ASSOCIATE MEMBER
Imerys P V t Plot Design Service
Whilst the PVt Solar Panels are designed to beinstalled by your roofing contractor in conjunctionwith the standard battens used for the surroundingtile, the electrical connection should be undertakenby an M.C.S. (Microgeneration Certification Scheme)accredited PV installer.
The clever one-piece interlocking designmakes the PVt quick and easy to install. Please refer to the Installation Guide on theImerys website
1 Slot together PV tiles
2 Screw to batten
3 Push-fit cables
NB – Grid connection requires M.C.S.accredited installation. For more information,please contact Imerys Roof Tiles.
Please note that the roof tiles which immediatelysurround each PVt panel should be mechanically fixedto their supporting batten.
Typical batten for the HP10 tile: 25x50mm, nail size 50x3mm
1 2
3
BS EN ISO 14001:2004Environmental
management system
BS EN ISO 1304:1998
Welcomed by Planners, attractive to Homebuyers
Gain a planning advantage and reduce energy costs
The Imerys PVt 60 Photovoltaic Tile
Innovation for Sustainable Homes
AA INSTALLATION OF PVt SOLAR PANELS
AA FROM SITE PLAN... AA ...TO INDIVIDUAL PLOT DESIGN
Distributed by
British Board of Agrément tel: 01923 665300Bucknalls Lane fax: 01923 665301Garston, Watford e-mail: [email protected] WD25 9BA website: www.bbacerts.co.uk©2010
The BBA is a UKAS accredited certification body — Number 113. The schedule of the current scope of accreditation for product certification is available in pdf format via the UKAS link on the BBA website at www.bbacerts.co.uk
Readers are advised to check the validity and latest issue number of this MCS Certificate by either referring to the BBA website or contacting the BBA direct.
Certifi cate No: MCS BBA 0049
Technology: MCS 005 Solar Photovoltaic Modules (Polycrystalline cell technology)
CAPTELIAZAC de Chavanne
3, impasse de Chavannr69400ArnasFrance
Products: FAG-CAP060D-5ZDH Building Integrated PV
FOG-CAP060D-5ZDH Building Integrated PV
The BBA (British Board of Agrément) has issued this Microgeneration Certification Scheme (MCS) Certificate to the company and products named above, in recognition of compliance of the products with the MCS Scheme Requirements for the technology named above.
On behalf of the British Board of Agrément
Date of issue: 17 November 2010 Greg Cooper Chief Executive