1

CONFERENCE PROGRAMME1st - 3rd November 2017, Conference Auditorium, Hall No.7,

Pragati Maidan, New Delhi, India

13th International Technical Conferenceon Pulp, Paper & Allied Industries

DAY-1(Wednesday, 1st November 2017)

®

2017

Registration : 8:30 a.m. to 9:30 a.m.

INAUGURAL SESSION (9:30 to 10:45 a.m.)

Welcome Address : Mr. Pramod Agarwal President, Indian Agro & Recycled Paper Mills

Association (IARPMA) & CMD, Rama Paper Mills Ltd.

Address on Status of Indian : Mr. P.S. PatwariNewsprint Industry President, Indian Newsprint Manufacturers Association

(INMA) & Vice President, Eastern Region, IARPMA & CEO and Executive Director, Emami Paper Mills Ltd.

Address on Status of Indian : Mr. Saurabh BangurPaper Industry President, Indian Paper Manufacturers Association

(IPMA) & Vice Chairman, The West Coast Paper Mills Ltd.

Address on Status of Non-Wood : Mr. Nandkishore Kagliwal Paper Industry Vice President, Indian Agro & Recycled Paper Mills

Association, Western Region & CMD, Nath Paper Mills Ltd.

An overview of Paperex Exhibition : Mr. Gordon Payne Regional Director - Asia, ITE Group PLC

Address on Salient features of : Mr. N. GopalaratnamConference Chairman, Technical Committee, Paperex-2017 and

Chairman, Seshasayee Paper and Boards Ltd.

Keynote Address cum : Mr. Kari Tuominen“S.V. Memorial Lecture” President & CEO, Andritz Oy, Finland

Address by Guest of Honour : Dr. Vandana Kumar Joint Secretary, Department of Industrial Policy and

Promotion, Ministry of Commerce & Industry, Govt. of India

Release of Trade Fair Directory : By Chief Guest& Inpaper Directory Presentationof Award of Achievement

Inaugural Address : Shri C.R. Chaudhary Hon’ble Union Minister of State for Commerce &

Industry and Consumer Affairs, Food & Public Distribution, Govt. of India

Vote of Thanks : Mr. Anil Kumar Sr. Vice President, IARPMA & Executive Director and

CEO, Shreyans Industries Ltd.

2

Tea/Coffee: 10.45 am to 11.15 am

Technical Session IIndian Paper Industry: Trends and Challenges for Sustainable Growth

(11.15 am to 1.15 pm)

Session Chairman:

Mr. Sanjay Singh, Divisional Chief Executive; ITC Ltd- Paperboards and Specialty Papers Division, Secunderabad, Telengana, India.

1. The Indian Paper Sector: Status Report 2017 and Sustainability Prospects

Dr. Kawaljeet Singh, Mrs. Rita Tandon and Dr. B.P. Thapliyal; Central Pulp and Paper Research Institute, Saharanpur, Uttar Pradesh, India.

2. Indian Paper Industry: Key trends and Challenges

Varun Jain and Vikanshu Bhargava; Ernst & Young LLP, Gurgaon, Haryana, India.

3. The Future of Paper and Recycling in India

Vijay Gupta; WPS Pte. Ltd., Singapore.

4. Development and Adoption of Appropriate Technologies for Enhancing Sustainability and Competitiveness of the Indian Paper Industry

Dr. R.K. Jain; UNIDO, (IC-ISID), Delhi, Dr. Øyvind Eriksen, UNIDO, Vienna, Austria , Dr. Anders Isaksson and Dr. Ritin Koria, RISE Paper and Fibre Res. Inst., Trondheim, Norway; Vikas Kumar and Mrs. Ashima Marwaha, UNIDO(IC-ISID), Delhi.

5. Indian Paper Industry and the Education Sector

P.R. Ray; Esskay Impex, Kolkata, West Bengal, India.

Lunch: 1.15 pm to 2.15 pm

Technical Session IIDevelopments in Fibreline and Tissue & Papermaking

(2.15 pm to 4.15 pm)

Session Chairman:

Mr. Kasi Viswanathan, Managing Director; Seshasayee Paper & Boards Ltd, Erode, Tamil Nadu, India.

6. Fiberline Optimization utilizing Novel Measurement Technologies complimented with Advanced Process Control

Akhlesh Mathur; ASPAC Fiber Segment, BTG Process Solutions, Singapore and Dr. Dan Smith; BTG Process Solutions, USA.

7. Ozone Bleaching: Appropriate Strategy for Sustainable Growth of the Pulp and Paper Industry

Brendan van Wyk; Pulp & Paper; Xylem Water Solutions South Africa (Pty) Ltd; Gauteng, South Africa; Narain Madhavan; Xylem Water Solutions India Pvt. Ltd, Bangalore, India; Alexis Metais ; Xylem Water Solutions, Lyon, France.

3

8. GapCon EconPRESS™ NExT: The New Tool for Energy Savings and Tissue Quality Improvement

Dr. Francesco De Biasi; GapCon tissue S.r.l. and GapCon tissue S.r.l. Italy; PAPCEL, a.s. Czech Republic.

9. Latest Headbox Technology for Paper and Board making

Juan Cecchini, Maarit Tukiainen and Hannu Turpeinen; Valmet Technologies Inc., Finland.

Tea/Coffee: 4.15 pm to 4.30 pm

Paper Day Celebration 4.15 pm onwards

Technical Session IIIProgress in Key Inputs: Wood and Water

(9.30 am to 10.30 am)

Session Chairman:

Mr. S.V.R. Krishnan, Executive Director (Operations); Tamil Nadu Newsprint and Papers Ltd, Kagithapuram; Karur, Tamil Nadu, India.

10. Sustainable Fibre Resource Development through Advanced Clonal Technology

N.K. Agarwal, O.P. Shukla, R. D. Gupta, S. L. Narkhede and S. K. S. Chauhan; JK Paper Ltd, Unit- CPM, Songadh, Gujarat, India.

11. Performance Review of Pulp & Paper Manufacturing Sector Located in Ganga River Basin under Charter for Water Recycling and Pollution Prevention in Pulp & Paper Industries

Arun Bijur, Vice Chairman; SPB Projects and Consultancy Ltd. Chennai, Tamil Nadu; A.K. Vidyarthi, Addnl. Director; Central Pollution Control Board, Min. of Environment & Forests, Govt of India, New Delhi and Chandrashekhar Kashikar; BILT, Ballarshah, Maharashtra

Tea/Coffee: 10.30 am to 11.00 am

Technical Session IVBreakthrough Technologies

(11.00 am to 1.00 pm)

Session Chairman:

Dr B. P. Thapliyal, Director; Central Pulp and Paper Research Institute, Saharanpur, Uttar Pradesh, India.

12. How do Breakthrough Technologies enhance Pulp and Paper Machine Efficiency and allow developing Innovative Paper Products?

Dr .Véronique Morin, Auphélia Burnet, Bruno Carré and Philippe Martinez; Centre Technique du Papier, Grenoble, France.

DAY-2(Thursday, 2nd November 2017)

4

13. Nanotechnology in Paper Manufacturing: Harsh Environments

Dr. Mahendra Patel; Indian Agro and Recycled Paper Mills Association (IARPMA), New Delhi.

14. FiberLean™: An Innovative Composite Material

Dr. Andrew Findlay; Imerys Minerals, Par Moor, Cornwall, U.K.; Dr. Leslie McLain; Imerys, North America and Kapil Dev; Imerys Minerals, Pune, Maharashtra, India.

15. Improving the Performance of Agricultural Residues and Recycled Fibres by High Performance Fillers

Dr. Vijay Mathur; Pacific Nano Products, USA.

Lunch: 1.00 pm to 2.00 pm

Technical Session VInnovative Approaches in Energy-saving

(2.00 pm to 5.00 pm)

Session Chairman:

Mr. P. K. Suri, Executive Vice President (Works); JK Paper Ltd, Jaykaypur, Odisha, India.

16. Steam Profiler and Energy Monitoring improve Energy Efficiency

Jarmo Tiilikka and Jaakko Oksanen; Valmet, Automation BL, Tampere, Finland and Rakesh Uniyal, Valmet India, Gurgaon, Haryana, India.

17. Positive Impact of Technical Wires on Carbon Footprint

Christian Strohschein; ANDRITZ Kufferath GmbH, Duren, Germany and Chandrakant B. Naik; ANDRITZ Technologies Pvt.Ltd., Chennai, T.N., India.

18. Innovative Approaches in Processes and Operations to reduce Energy and Utility Consumption: A Case Study

P.K. Suri and Mayank Jindal; JK Paper Ltd and Dr. S.P. Singh; Pulp and Paper Research Institute, Jaykaypur, Rayagada, Odisha, India.

19. Sustainable Growth and Competitiveness in Paper-making with Reduced Water, Energy and Protected Environment

P. Sankaralingam, Dr. S. Subramanian and M. Subramanian; Tamilnadu News Print and Papers Ltd, Kagithapuram, Karur, Tamil Nadu, India.

20. New Green Initiative by CPPRI for Cleaner and Green Energy Generation

Dr. A.K. Dixit; Dr. Tarun, Kumar Anupam and Dr. B.P. Thapliyal; Central Pulp & Paper Research Institute, Saharanpur, Uttar Pradesh, India.

21. Innovative Approaches on Reduction of Carbon Foot Print, Environmental Impact and Enhancement in Productivity: A Case Study

M.B.S Nair and B.V.K.S.S. Prasad; Emami Paper Mills, Balasore, Odisha, India.

Tea/ Coffee: 5.00 pm to 5.30 pm

5

Technical Session VIEnvironmental Protection and Simulation Tools

(9.30 am to 10.30 am)

Session Chairman:

Mr. Anil Kumar, Executive Director and CEO; Shreyans Industries Ltd, Ahemedgarh, Punjab

22. A Breakthrough High Rate Anaerobic Reactor proves itself in the Pulp and Paper Industry

Michel Noordink, Leo H.A. Habets and Rienk Prins; Pâques BV, Netherlands and Suchit Dekivadia & Jacopo De Steffani; Pâques Environmental Technology India Pvt Ltd., Chennai, India.

23. Recycled Process Water Management and Application of Simulation Tools

Dr. Thierry Delagoutte, Dr. Bruno Carré, Dr. Elisa Zeno; Dr. Patrick Huber, Dr. Sylvie Nivelon, Mr. Pascal Ottenio, Dr. Fabienne Vercelli and Dr. Saurabh Kumar; Centre Technique du Papier, Grenoble, France.

Tea/ Coffee: 10.30 am to 11.00 am

Technical Session VIIOptimisation in Coating & Printing

(11.00 am to1.00 pm)

Session Chairman:

Dr. Yuvraj Singh Negi, Professor/HOD, Professor-Incharge; IIT Roorkee Saharanpur Campus, Saharanpur Campus, U.P.

24. Optimisation of Coating with Water - based Barriers

Daniel Ragnarsson; UMV Coating Systems, Saffle, Sweden.

25. Automated Intermediate Roll Storage (between Paperboard Production Lines and PE Coating): A Case Study

Jouni Räisänen, Sales Manager; Pesmel Finland; Kaj Fahllund, Pesmel OY, Finland, J. Rajagopalan, Pesmel South Asia and J. Srikumar, Pesmel India.

26. Print Optimisation of Coated Fibre-based Packaging through Control of Porosity

Dr. (Mrs.) Janet Preston; Imerys Minerals, Par Moor, England; Dr. Andrew Findlay; Imerys Minerals, Par Moor, England and Kapil Dev; Imerys Minerals,Pune, Mahashtra, India.

27. Reformulation of Paperboard Coatings for Optimized Quality and Cost Efficiency

Peter Dahlvik; Omya International AG, Switzerland and Richard Waters; Omya Australia.

Lunch: 1.00 pm to 2.00 pm

DAY-3(Friday, 3rd November 2017)

6

Technical Session VIIIRecycled Fibre Processing & Planning and Advanced Analytics

to improve Mill Performance(2.00 pm to 4.00 pm)

Session Chairman:

Mr. M.B.S Nair, Director; Emami Paper Mills, Balasore, Odisha

28. The Compromise between Screening Efficiency and Runnability: Is there a way to have it all?

Chandrakant B. Naik; ANDRITZ Technologies Pvt Ltd., Chennai, India ; Toivila Mari, ANDRITZ Fiedler GmbH, Regensburg, Germany and Meyer Keith, ANDRITZ Inc., Glens Falls, USA.

29. Advanced Analytics improve Mill Performance and Reliability

Jari Almi, Industrial Internet, and Johanna Newcomb, Advanced Applications and Industrial Internet; Valmet, Tampere, Finland. (To be presented by Jarmo Tiilikka, Valmet, Automation BL, Tampere, Finland)

30. End to End Contribution Maximisation Model- System based End to End Planning Tool Ensuring Sustainable Profitability for Paper Industry

Vikanshu Bhargava; Business Advisory Services, Ernst & Young LLP, Gurgaon, Haryana.

31. Paper Carrier Ropes – as Essential Part for Economical and Sustainable Paper Production: Case study

Erich Kurzbock and Stefan Kurzbock; Traunkai, Austria.

VALEDICTORY SESSION(4.00 pm to 5.00 pm)

Tea/Coffee: 5.00 pm to 5.30 pm

Cultural Programme & Cocktail-Cum-Gala Dinner(Friday, 3rd November 2017 from 7:30 P.M. onwards ) at “Oakwood Lawns”

Tivoli Garden Resort Hotel, Chhattarpur Hill, Mehrauli, (Near Chhattarpur Mandir) New Delhi - 110074

(BY INVITATION ONLY)

***************

NOTE..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

NOTE..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

..........................................................................................................................

C/o Indian Agro and Recycled Paper Mills Association (IARPMA)404, Vikrant Tower, 4, Rajendra Place, New Delhi - 110 008, India

Tel.: +91-11-2586 2301, Fax: +91-11-2576 8639E-mail: iarpma@inpaper.com / publication@inpaper.com

Website: www.inpaper.com, www.paperex-india.com

INPAPERINPAPERI N T E R N A T I O N A L

INPAPERPaperex Secretariat

THANKS

A Publication on Indian Pulp, Paper, Printing and Allied Industry

INPAPERINPAPERI N T E R N A T I O N A L

INPAPER

www.pesmel.com