Mpo brochure 150324a

MPO Cables in Data Center

MITS Component & System Corp.Tel : +886-2-66215899 E-mail: [email protected]

Our Experience in Data Center


The System in Data Center

Due to the IT rapids implement, the new Data Center

standard speed will migrate from 10Gb to 40Gb/100Gb.

Our solution in Data Center :

� Using the solution with plug-n-play, high density,

expandable and Pre-terminated cable system. Also

modulate to have system management and pre-

terminated parts that reduce the installation time and

give the Data Center more flexible to migrate to high

speed, or adding/changing the cable system.

� We are using the low loss connectors and bend insensitive

fibers (bending radius < 7.5mm）. This gives trucking

cable with smaller loss and bending capability. It can fulfill

the <79ns delay spec. & link attenuation for 40G/100G

transmission.


MPO Truck CableMPO-MPO Truck Cables are good for the quick cabling between

Data Center and optical infrastructure. Interfacing between the

MDA (Main Distribution Area), HDA (Horizontal Distribution

Area), & EDA (Equipment Distribution Area) with plug-n-play

structure gives the lower maintain cost and initial installation

cost.

Product Series : • 40G/100G SR4 MPO Trunk cable

• 120G/100G CXP/SR10 MPO Trunk Cable

MPO Break-out CableMPO-LC Break-out cable means one side is MPO 12/24

connector, the other side is Duplex LC type connector. Most

of cases is using this kind of cable to connect the core side

to the system side directly. Also it can used for system

expansion.

Product Series : • 40G/100G QSFP-LC MPO Cable

• 120G/100G SR-10/CXP to LC optical Cable

• 120G CXP to QSFP MPO Cables


MPO Cassette Module

The MPO/MTP Cassette modules

provide the interface between the

MPO/MTP on the trunk and the LC

duplex and jumpers and that will then

connect directly into the electronics.

MPO Cassette Management Panels

The rack-mounted patch panel is designed to manage and

house easy-plug MPO to LC fiber cassette modules. For

connecting plug-and-play pre-terminated high density MPO

Fiber cabling system. Our solution contributes to greater

network availability that especially suitable for SAN, LAN and

Data Center applications, Like MDA, IDA & HAD. Each easy-

plug MPO to LC cassette is accommodated with a 12/24-fiber

MPO based fiber assemblies, and pre-loaded with LC adapters

in different fiber modes for your choices.


LC Duplex Uniboot Optical Harness

Cable

A unique dual-core standard duplex patchcore integrated one-

tailed jacket and duplex LC connector (uniboot optical harness

cable). It is using the miniaturized a single tube 3.0mm round

cable. Using this bend-insensitive fiber which with superior

bending properties. Compared with the conventional LC

duplex patchcore, our LC patchcore is reducing cabling

space/cable congestion, improve cabling management/

installation efficiency and also to improved air circulation for

the equipment.

Features/Benefits:

• Duplex uniboot optical harness

cable is using a unique

miniaturized round two-core

cable• Let the connectors easier for the installation and

maintenance in high density Data Center application.

• Low Insertion loss and high Return loss

• Using the bend-insensitive multimode/Single mode fiber

which design for small bend radius fiber cabling installation

environment


Technology

Mpo brochure 150324a