RiG WIRELINEL- Ic h

- TOP SEAL ASSEMBLY

t-TOP PACKER

4-B1T SEATING SUB ;CORING BIT

I- MID PACKER

4_ PREFORATED STRADDLE

- BOTTOM PACKER

Replacement Inflatable

Packers & Elements PTY LTD

www.rripe.com.au

Standard Wireline Permeability Packer System (SWPPS)

The Standard Wireline Permeability Packer System (SWPPS) has a range of packer sizes; BQ, NQ, et) HQ, PQ. The standard wireline permeability packers are configured and designed for permeability ;8

Deployment and operation is simple. The wireline permeability packer assembly is deployed down the drill rods until the bit seating sub lands on the drill rod bit. With the top seal assembly (tighthead) tightened, the inflatable packers are inflated and water is then pumped through the tighthead down the rods, through the packers and into the formation.

KEY FEATURES:

• Simple deployment and operation • Fixed end packer elements in BQ, NQ, HQ, PQ • Easy and efficient hydrofracture and permeability testing • Lugeon Drill Stem Testing (DST) • Addition or subtraction of perforated pipes permit flexibility in testing target zones • Tighthead assembly for reliable sealing on the rig wireline

1. Inflation Gauge Assembly

4. Tight Head

7. Gas Cylinder 2. Pressure Gauge Rig

5. Regulator

3. Hose Reel

6. 1" hose 5m Long 15/16 JICF Ends

and hydrofracture tests easily and efficiently.

C R Replacement Inflatable Packers & einents - Perth WA Tel: +618 9475 0700 Email: packersgrripe.com.au