Embed Size (px)
Citation preview
APPLICATIONS
FEATURES
• Hydraulic - has no Nitrogen or other Inflation lines • Water inflation enables a higher pressure seal • Works up to 1,000 psi, depths down to over 1,000m • Works with standard Boart Longyear* or equivalent systems ( ™ Boart Longyear ) • Single or Straddle (double) packer configurations, single upgrades
to straddle
• Speed and simplicity of use • Compatible with orientation devices • Rental systems available • Ancillary equipment can also be supplied such as Flow Meters
(with Pressure Gauges, Datalogger + USB computer connection) • Pump down versions for shallow angle/horizontal use • Stainless steel option for Arctic (brine) and other aggressive hole
conditions
Permeability Testing for:
• Mine dewatering planning
• Coal Bed Methane exploration
• In Situ mining
• Construction (Dams, tunnels etc)
• Other geotechnical evaluations
SWiPS—Standard Wireline Packer System
Designers & manufacturers of inflatable packers & associated equipment. [email protected]
For use in conjunction with industry standard wireline coring systems for
permeability testing.
Head Office 1 Pitino Court
Osborne Park, WA 6017 Ph: +618 9204 2448 Fax: +618 9204 2449
IPI Well Products [USA] Red Lodge
Montana, USA Ph: +1 406 446 9940 Fax: +1 406 446 1260
IPI Latin America Monjitas 527 Of. 515
Santiago, Chile Ph: +56 2 639 8373
Mob: +56 9 78896974
© Inflatable Packers International
Operation - as easy as 1-2-3
Step 1 SWiPS is run in after inner barrel withdrawn, locks on to the landing ring
Step 2 SWiPS is inflated by water and testing is conducted
Step 3 SWiPS is deflated and withdrawn, using a standard overshot, inner barrel replaced and drilling recommences.
Note (1) A single system is designed to simply work as part of a coring job, a straddle system works independent of the coring phase.
Note (2) If the packer becomes stuck withdrawal is effected by using the emergency deflation system.
NQ-SWIPS HQ-SWIPS PQ-SWIPS
CENTRE TUBE ID 13.9 mm [0.55”] 18.9 mm [0.74”] 32.5 mm [1.3”]
MAX WORKING PRESSURE IN RATED SIZE
100 bar [1500 psi] @ 76mm
100 bar [1500 psi] @ 96mm
100 bar [1500 psi] @ 116mm
PACKER ELEMENT LENGTH
1000 mm [39.4”] 1000 mm [39.4”] 1000 mm [39.4”]
OD - DEFLATED MIN 42 mm [1.65”] 60 mm [2.36”] 83 mm [3.27’]
OD- EXPANDED MAX 90 mm [3.5”] 130 mm [5.1”] 160 mm [6.3”]
• Accessories available include:
• ‘C’ Plate and hauling sub for tool assembly over rods
• Flow meter assembly with pressure gauge, optional data logger and USB connection
• Lower packer assembly to convert single packer system to straddle system
• Extension subs for 3m [10ft], 6m [20ft] and 12m [40ft] core barrels
Designers & manufacturers of inflatable packers & associated equipment. [email protected]
SWiPS
