Share & Care September 2018 - Sri Padhmamsripadhmam.com/wp-content/uploads/2018/09/Share-and-Care-Septe… · 3 Leadership- HR article 11 4 Sri Padhmam e-Learning 14 5 Engineers Day

www.sripadhmam.com

Share & Care – September 2018

“What a Person’s mind can conceive & believe, it can achieve!”

BY SRI PADHMAM CONSULTANCY & TRAINING

“This e-magazine is for FREE Circulation only” 1

# Subject Page

1 Top Performers from the companies on various workshops 3

2 Thought for the month 10

3 Leadership- HR article 11

4 Sri Padhmam e-Learning 14

5 Engineers Day - History 15

6 Statistical Process Control : A Close Look 17

7 Feedback on Royal Enfield Team 20

8 Public Program on Process FMEA ( FMEA ) (AIAG – VDA version wit Latest Changes) 21

9 Design FMEA ( AIAG- VDA ) Latest version Template 23

2

CONTENTS

An initiative from Sri Padhmam Consultancy & Training For free circulation only !

Coordinated by

Company

Top Performers

Rane Institute for Employee

Development (RIED), Chennai

Mr. Prabhakaran & Team

Mr. Kumar K &

Mr. Saravanan S

Top Performers

Workshop on

APQP & PPAP (as per IATF 16949:2016) with a focus on CSR

3An initiative from Sri Padhmam Consultancy & Training For free circulation only !

Coordinated by

Company

TAFE

Chennai

Top Performers

Mr. Ashok Thomas & Team

Mr. Sesha Barathi B of Caparo Engineering India Ltd,

Mr. Santhosh A C of Sandhar Automotive,

Mr. Ravi shankar sharma of JMT Auto Ltd,

Mr. Vignesh kumar G of Sri Bhagya Fibre Glass

Products,

Mr. Raseem ahmed R of Sundram Fastener Ltd &

Mr. Gopinath R of UCAL Auto Pvt Ltd

Top Performers

Workshop on

Analytical Tools for Improvements

4

Suppliers Development Program


Coordinated by

Company

Top Performers

Rane Institute for Employee

Development (RIED), Chennai

Mr. Prabhakaran & Team

Mr. Kumarasamy C

Mr. Kumar K

Mr. Prabhu &

Mr. Susindar B

Workshop on

Process Failure Mode and Effects Analysis (PFMEA)

(AIAG – VDA Version with latest Changes)

Top Performers


Coordinated by

Company

Top Performers

LUCAS - TVS,

Padi

Mr. Manikanda Babu & Team

Mr. Chandirran V,

Mr. Hariharan V,

Mr. Ganesh kumar S &

Mr. Raja boopathy G.

Top Performers

Workshop on

Design Failure Mode and Effects Analysis (DFMEA)


Top Performers

Coordinated by

Company

Hinduja Foundries

Chennai

Top Performers

Mr. Raman & Team

Mr. Vishnupriyan S,

Mr. Mohammed Adhil K,

Mr. Bhupesh C &

Mr. Avinash kumar

Workshop on

APQP & PPAP (as per IATF 16949:2016) with a focus on CSR


Top Performers

Coordinated by

Company

Yazaki India Pvt Ltd

Chennai

Top Performers

Ms. Anuradha & Team

Mr. Manikandan R,

Mr. Venkateswaran C &

Mr. Kasi Raja N

Workshop on

Process Failure Mode and Effects Analysis (PFMEA)

(AIAG – VDA Version with latest Changes)


Top Performers

Workshop on

QC Tools

Coordinated by

Company

Samvardhana motherson,

Chennai

Top Performers

Ms. Beulah G & Team

Mr. Yuvaganesh V,

Mr. Karthik M &

Mr. Malai Chamy R


“Don’t make excuses,

make improvements”

Thought For the Month !

Let us think Deeply & Implement Nicely !


L E A D E R S H I P11An initiative from Sri Padhmam Consultancy & Training For free circulation only !

What does Leadership mean?

• It means responsibility and inspiration together. It means walking the talk. It is these three things together.

• A good leader walks the talk, takes responsibility and inspires people around to also walk the talk and take

responsibility.

• When you see an organization or other people doing this, then you also feel inspired to do the same and many

others also feel like doing the same.

1. Teamwork is very essential in any organization. We need to learn team work.

2. The human touch is also important; though not too much of it.

3. We need to keep in mind that emotional and ego-related issues should not enter business. When these issues

creep into any organization’s structure, then they slow hinder the progress of the organization. If a person in an

organization thinks “This person did not invite me”, or “That person does not respect me”, or “This person

takes all the credit”, etc., then that is no good. We need to do away with these kinds of small bickering


4. Effective communication:

• You should put forth your good ideas also. It is not enough to just do good work and say, “I am so good and I do

so much good work”. You also have to project it; communicate your good work in the organization.

• If you just attend to these four points, then everything will keep moving well.

• I tell you, there will be some favourable and some unfavourable times in any organization.

• All that you need to know in such times is to look inside.

• Do not lose faith. Have confidence and move ahead with conviction. That is essential.

“Don't find the fault, find the remedy” — Henry Ford


Sri Padhmam e-Learning

100% video based training at our e-learning centre | www.spel.net.in

Mr. Jaya Prakash

Completed Analytical tools for Improvements (Stage - 1)

Passed with

distinction


Sir Mokshagundam Visvesvaraya

(1860 - 1962)

15

15th September, 2018


• The Engineering Community across India celebrates Engineers Day on 15 September every year as a tribute to the

greatest Indian Engineer Bharat Ratna Mokshagundam Visvesvaraya.

• "Role of Engineers in a developing India" is the theme of Engineers Day

• Mokshagundam Visvesvaraya, born on 15 September, 1861, in Muddenahalli near Chikkaballapur.

• He went on to become India’s most prolific civil engineer, dam builder, economist, statesman, and can be counted

among the last century’s foremost nation-builders

• He was the chief engineer responsible for the construction of the Krishna Raja Sagara Dam in Mysore as well as as the

chief designer of the flood protection system for the city of Hyderabad.

• Due to his outstanding contribution to the society, Government of India conferred 'Bharat Ratna' on this legend in the

year 1955."

• He was also awarded the British knighthood by King George V, and hence has the honorific "sir".

• His birthday, 15 September is celebrated as the Engineers day.

Brief history of Bharat Ratna Mokshagundam Visvesvaraya


STATISTICAL PROCESS CONTROL : A CLOSE LOOK

4


1. Central Tendency - Mean Measures of central tendency show where the data is clustered or grouped together near a

central point.

• The measure of central tendency we will use is the mean (average). The mean is calculated by adding all the observations

and dividing by the number of observations.

2. Dispersion – Range, Standard Deviation Not only is it important to know the central tendency of data, but also to know

the amount of scatter about the central point.

• It is possible that the data may be closely grouped near the central point, it may be uniform, or there may be large

numbers of extreme values. Some description of spread is needed.

• The two most common measures of dispersion are range and standard deviation.

• The range is calculated by subtracting the smallest observation from the largest.

• Statistical Process Control Sigma (σ) is the standard deviation.

STATISTICAL PROCESS CONTROL


• The advantage of using it is that it is a very efficient estimator of dispersion.

• Unfortunately, it is very difficult to calculate.

• Because statistical calculators are available, calculators will generally be used to obtain the standard deviation.

• The types of control charts for variables used in this manual are X-bar (X) control charts and range (R) control charts.

• Although each chart is separate, they usually appear as one, which is called an X-R chart. A control chart is a statistical

tool used to check the stability of a process over time.

Its basic functions are:

• To describe what control there is.

• To help get control.

• To help judge whether control has been attained.

• To detect change in process performance.

• To estimate the process capability.

• To signal when corrective action is needed.

Will continue….. 19An initiative from Sri Padhmam Consultancy & Training For free circulation only !

Your training material was outstanding

The case studies made the entire program very

interesting & simple

Our perspective on FMEA has changed completely

The new FMEA approach was made very easy for us

Very inspiring !!!Mr. Sridaran,

Royal Enfield Team,Oragadam, Chennai

A feedback – on Process FMEA ( AIAG- VDA ) Latest version


P u b l i c P r o g r a m – S e p t e m b e r 2 0 1 8

Two day workshop on

“Process Failure Mode & Effects Analysis ( PFMEA )”

(AIAG – VDA version with Latest Changes)

Resource Person

Mr. A V Manivannan, Principal Consultant & Trainer

Get your Certificate after successful completion of the

course

Program Objectives

✓ To familiarize the participants to apply the concepts & Practices of Failure Mode & Effects Analysis on Process FMEA, linking to APQP & IATF 16949 standard

✓ To provide the skill sets on Process FMEA approach, identifying the Recommended actions ( Action Priorities ) and improving the manufacturing & assembly processes

through structured application of Process FMEA

✓ Also to provide the insights on various changes in the latest FMEA edition ( AIAG – VDA ).

Program Date & Time

21-09-2018 ( Friday ) & 22-09-2018 ( Saturday )

[ 2 days ] 09.00 am to 05.00 pm

Venue

JP HOTEL, 1131, Inner Ring Road, Koyambedu.

Opposite CMBT Bus Stand.

An initiative from Sri Padhmam Consultancy & Training For free circulation only ! 21

“Process Failure Mode & Effects Analysis ( PFMEA ) (AIAG – VDA version with Latest Changes)”

Course Deliverables

✓ New proposed FMEA structure ( 2018 )

✓ Mapping of FMEA process wrt APQP & IATF 16949

✓ Linkages between Design FMEA & Process FMEA

✓ Vital tools ( inputs for P FMEA )

- PFD

- Characteristics matrix & Reverse FMEA approach

- 5 T analysis

- Process block diagram

✓ Real case analysis on PFD & Process FMEA

✓ Changes in the FMEA approach ( 2018 )

✓ Successful case studies

✓ Advanced learning on Process FMEA &

✓ Sustenance of FMEA

Program Fee

Rs.4,800/- (incl. GST) per participant

(Complementary Work book, Stationary, Refreshments & Lunch)

Corporate offers

3 employees from the same company - Rs.4,500/- ( incl. GST ) per head

4 to 6 employees from the same company - Rs.4,300/- ( incl. GST ) per head

Last date of Registration:

19-09-2018 ( Wednesday )

For more details on the pricing & corporate nominations for

in house & open house

Contact us :

Boopathi S

Mobile : +91 99621 17222

(or )

Write to us at “[email protected]”

An initiative from Sri Padhmam Consultancy & Training For free circulation only ! 22

Design FMEA ( AIAG- VDA ) Latest version Template

Ready for

FREE

download

www.sripadhmam.com

Design FMEA

( AIAG- VDA )

Latest version

Template

23

Latest version


http://www.sripadhmam.com/

Documents

Share & Care September 2018 - Sri Padhmamsripadhmam.com/wp-content/uploads/2018/09/Share-and-Care-Septe… · 3 Leadership- HR article 11 4 Sri Padhmam e-Learning 14 5 Engineers Day