SCHEDULE (BILL) OF QUANTITIES - RITES · SCHEDULE (BILL) OF QUANTITIES ... Volume-II Bill of Quantity SCHEDULE NO. ... Stairs, (excluding landings) except spiral-staircases. sqm

BHARAT ELECTRONICS LIMITED

(A Government of India Enterprise)

TENDER DOCUMENT

FOR

CONSTRUCTION OF RADAR CUM ANTENNA BUILDING, DG HOUSING SHED, OPS BUILDING AND ALLIED WORKS AT

INDIAN AIR FORCE STATION, THANJAVUR (TAMILNADU)

PART-2

FINANCIAL BID

SCHEDULE (BILL) OF QUANTITIES

TENDER NOTICE NO: RITES/CO/AP/THANJAVUR/TENDER/2013/01

OCTOBER 2013

Consultants

(A Govt. of India Enterprise) AIRPORTS DIVISION

FIRST FLOOR PLOT NO. - 144, SECTOR - 44,

GURGAON (HARYANA)-122 003

Construction of SRE Building, DG Shed, OPS Building and allied works at Thanjavur Tender DocumentsFinancial Bid : Volume-II Bill of Quantity

SCHEDULE

NO.

DESCRIPTION AMOUNT IN Rs.

I CIVIL ENGINEERING WORKS-DSR ITEMS

II CIVIL ENGINEERING WORKS- NON SCHEDULEITEMS

III ELECTRICAL ENGINEERING WORKS- DSR ITEMS

IV ELECTRICAL ENGINEERING WORKS- NONSCHEDULE ITEMS

GRAND TOTAL ( IN FIGURES)

GRAND TOTAL ( IN WORDS)

Name of Work: Construction of Radar Cum Antenna Building, DG Housing Shed, OPS Building and allied

works at Indian Air Force Station, Thanjavur

PART-2

Financial Bid

Schedule (Bill) of Quantities

ABSTRACT OF COST QUOTED

Before Issue

Corrections (CR):Cuttings (CT):Insertions (I):OverWrittings (OW): Abstract of Cost / 1

After Receipt

Corrections (CR):Cuttings (CT):Insertions (I):

OverWrittings (OW):

CPWD DSR-2012 ITEMS-CIVIL ENGINEERING WORKS (SCHEDULE I) Const. of SRE at IAFS Thanjavur (TN)

S.No Code Description UOM Qty Rate (Rs) in figures Rate (Rs) in words Amount

2 Earth work

1 2.6.1 Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means over areas (exceeding 30cm in depth.1.5 m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50 m and lift upto 1.5 m, disposed earthto be levelled and neatly dressed. All kinds of soil.

cum 750.00

2 2.8.1 Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches or drains (notexceeding 1.5 m in width or 10 sqm on plan) including dressing ofsides and ramming of bottoms, lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m. All kinds of soil.

cum 350.00

3 2.10.1.1 Excavating trenches of required width for pipes, cables, etcincluding excavation for sockets, and dressing of sides, ramming ofbottoms, depth upto 1.5 m including getting out the excavated soil,and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer byramming, watering, etc. and disposing of surplus excavated soil asdirected, within a lead of 50 m : All kinds of soil :Pipes, cables etc, not exceeding 80 mm dia.

metre 160.00

Name of Work: Construction of Radar Cum Antenna Building, DG Housing Shed, OPS Building and allied works at IAFS Thanjavur

Before Issue

Corrections(CR):Cuttings (CT):Over Writting (OW):Insertions (I): BOQ-CIVIL (DSR) /1

After Receipt:

Corrections(CR):Cuttings (CT):

Over Writting (OW):Insertions (I):



4 2.10.1.2 Excavating trenches of required width for pipes, cables, etcincluding excavation for sockets, and dressing of sides, ramming ofbottoms, depth upto 1.5 m including getting out the excavated soil,and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer byramming, watering, etc. and disposing of surplus excavated soil asdirected, within a lead of 50 m : All kinds of soil :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mmdia.

metre 140.00

5 2.11 Extra for excavating trenches for pipes, cables etc. in all kinds ofsoil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is overcorresponding basic item for depth upto 1.5 metre).

metre 160.00

6 2.25 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, leadup to 50 m and lift upto 1.5 m.

cum 810.00

7 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.All kinds of soil.

cum 312.00

8 2.27 Supplying and filling in plinth with Jamuna sand under floorsincluding, watering, ramming consolidating and dressing complete.

cum 160.00

Before Issue


After Receipt:





9 2.34.1 Supplying chemical emulsion in sealed containers including deliveryas specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

litre 250.00

Total of Sub Head-2

4 Concrete Work

10 4.1.10 Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

cum 135.00

11 4.2.3 Providing and laying cement concrete in retaining walls, returnwalls, walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts, struts, buttresses, string or lacingcourses, parapets, coping, bed blocks, anchor blocks, plain windowsills, fillets, sunken floor etc. up to floor five level, excluding the costof centering, shuttering and finishing :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size).

cum 6.00

Before Issue


After Receipt:





12 4.17 Making plinth protection 50 mm thick of cement concrete 1 : 3 :6 (1cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominalsize) over 75 mm thick bed of dry brick ballast 40 mm nominal sizewell rammed and consolidated and grouted with fine sand includingfinishing the top smooth.

sqm 155.00

Total of Sub Head-4

5 Reinforced Cement Concrete Work

13 5.9.1 Centering and shuttering including strutting, propping etc. andremoval of form for : Foundations, footings, bases of columns, etc. for mass concrete.

sqm 200.00

14 5.9.2 Centering and shuttering including strutting, propping etc. andremoval of form for : Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.

sqm 125.00

15 5.9.6 Centering and shuttering including strutting, propping etc. andremoval of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.

sqm 1040.00

Before Issue


After Receipt:





16 5.9.7 Centering and shuttering including strutting, propping etc. andremoval of form for : Stairs, (excluding landings) except spiral-staircases.

sqm 145.00

17 5.9.13 Centering and shuttering including strutting, propping etc. andremoval of form for : Vertical and horizontal fins individually or forming box louvers band,facias and eaves boards.

sqm 25.00

18 5.9.15 Centering and shuttering including strutting, propping etc. andremoval of form for : Small lintels not exceeding 1.5 m clear span, moulding as incornices, window sills, string courses, bands, copings, bed plates,anchor blocks and the like.

sqm 100.00

19 5.9.16.1 Centering and shuttering including strutting, propping etc. andremoval of form for : Edges of slabs and breaks in floors and walls.Under 20 cm wide

metre 1280.00

Before Issue


After Receipt:





20 5.9.19 Centering and shuttering including strutting, propping etc. andremoval of form for : Weather shade, Chajjas, corbels etc., including edges.

sqm 160.00

21 5.9.20 Centering and shuttering including strutting, propping etc. andremoval of form for : Suspended floors, roofs, landings, balconies and access platform.with water proof ply 12 mm thick.

sqm 930.00

22 5.9.21 Centering and shuttering including strutting, propping etc. andremoval of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.with water proof ply 12 mm thick.

sqm 1200.00

23 5.11.1 Extra for additional height in centering, shuttering where everrequired with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, forevery additional height of 1 metre or part thereof (Plan area to bemeasured).Suspended floors, roofs, landing, beams and balconies (Plan areato be measured).

sqm 1180.00

Before Issue


After Receipt:





24 5.18.1 Providing precast cement concrete Jali 1 : 2 : 4 (1 cement : 2coarse sand : 4 graded stone aggregate 6 mm nominal size)reinforced with 1.6 mm dia mild steel wire including centering andshuttering, roughening cleaning, fixing and finishing in cementmortar 1:3 (1 cement : 3 fine sand) etc. complete excludingplastering of the jambs, sills and soffits.50 mm thick

sqm 50.00

25 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinthlevel. Thermo-Mechanically Treated bars.

kg 21325.00

26 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinthlevel.Thermo-Mechanically Treated bars.

kg 73550.00

27 5.30 Add for plaster drip course/ groove in plastered surface ormoulding to R.C.C. projections.

metre 455.00

Before Issue


After Receipt:





28 5.33.1 Providing and laying in position machine batched and machinemixed design mix M-25 grade cement concrete for reinforcedcement concrete work,using cement content as per approveddesign mix, including pumping of concrete to site of laying butexcluding the cost of centering, shuttering, finishing andreinforcement. including admixtures in recommended proportionsas per IS 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per directionof Engineer-in-charge.(Note: Cement content considered in this item is @ 330 kg/Cum.Excess/less cement used as per design mix is payable/recoverableseperately). All work up to plinth level.

cum 525.00

29 5.33.2 Providing and laying in position machine batched and machinemixed design mix M-25 grade cement concrete for reinforcedcement concrete work,using cement content as per approveddesign mix, including pumping of concrete to site of laying butexcluding the cost of centering, shuttering, finishing andreinforcement. including admixtures in recommended proportionsas per IS 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per directionof Engineer-in-charge.(Note: Cement content considered in this item is @ 330 kg/Cum.Excess/less cement used as per design mix is payable/recoverableseperately). All work above plinth level upto floor V level.

cum 400.00

30 5.35 Add for using extra cement in the items of design mix over andabove the specified cement content therein.

quintal 190.00

31 5.38 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for eachfour floors or part thereof.

cum 95.00

Total of Sub Head-5

Before Issue


After Receipt:





6 Brick Work

32 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 in foundation and plinth in: Cement mortar 1 : 6 (1 cement : 6 coarse sand)

cum 60.00

33 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 in superstructure above plinth level up to floorV level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)

cum 335.00

34 6.5 Extra for brick work / AAC block masonry / Tile brick masonry insuperstructure above floor V level, for each four floors or partthereof by mechanical means.

cum 105.00

35 6.12.2 Half brick masonry with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1 : 4 (1 cement : 4 coarse sand)

sqm 55.00

36 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in superstructure above plinth levelup to floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand)

sqm 445.00

Before Issue


After Receipt:





37 6.14 Extra for half brick masonry in superstructure, above floor V levelfor every four floors or part thereof by mechanical means.

sqm 25.00

38 6.15 Extra for providing and placing in position 2 Nos. 6 mm dia. M.S.bars at every third course of half brick masonry.

sqm 525.00

39 6.44 Brick edging 7 cm wide 11.4 cm. deep to plinth protection withcommon burnt clay F.P.S (non modular) bricks of class designation75 including grouting with cement mortar 1 : 4 (1 cement : 4 finesand).

metre 180.00

Total of Sub Head-6

8 Marble Work

40 8.10.2 Providing and fixing stone slab table rubbed, edges rounded andpolished of size 75 x 50 cm deep and 1.8 cm thick fixed in urinalpartitions by cutting a chase of appropriate width with chase cutterand embedding the stone in the chase with epoxy grout or withcement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade.

sqm 2.00

Total of Sub Head-8

Before Issue


After Receipt:





9 Wood and PVC Work

41 9.76 Providing and fixing bright finished brass 100 mm mortice latch andlock with 6 levers and a pair of lever handles of approved qualitywith necessary screws etc. complete.

each 10.00

42 9.84 Providing and fixing aluminium extruded section body tubular typeuniversal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 36 kg to 80 kg anddoor width from 701 mm to 1000 mm) with double speedadjustment with necessary accessories and screws etc. complete.

each 55.00

43 9.96.2 Providing and fixing aluminium sliding door bolts ISI markedanodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts andscrews etc. complete : 250 x 16 mm

each 10.00

44 9.97.1 Providing and fixing aluminium tower bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyed to required colour or shade with necessaryscrews etc. complete : 300 x 10 mm

each 40.00

Before Issue


After Receipt:





45 9.97.3 Providing and fixing aluminium tower bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyed to required colour or shade with necessaryscrews etc. complete : 200 x 10 mm

each 40.00

46 9.101.2 Providing and fixing aluminium hanging floor door stopper ISImarked anodised (anodic coating not less than grade AC 10 as perIS : 1868) transparent or dyed to required colour and shade withnecessary screws etc. complete.Twin rubber stopper

each 42.00

Total of Sub Head-9

10 Steel Work

47 10.2 Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer allcomplete:

kg 425.00

48 10.3 Providing and fixing in position collapsible steel shutters withvertical channels 20 x 10 x 2 mm and braced with flat iron diagonals20 x 5 mm size with top and bottom rail of T-iron 40 x 40 x 6 mmwith 40 mm dia, steel pulleys complete with bolts, nuts, lockingarrangement, stoppers, handles, including applying a priming coatof approved steel primer.

sqm 25.00

Before Issue


After Receipt:





49 10.5.2 Providing and fixing 1 mm thick M.S. sheet door with frame of 40 x40 x 6 mm angle iron and 3 mm M.S. gusset plates at the junctionsand corners, all necessary fittings complete, including applying apriming coat of approved steel primer.Using flats 30 x 6 mm for diagonal braces and central cross piece.

sqm 4.00

50 10.6.1 Supplying and fixing Rolling shutters of approval make, made ofrequird size M.S. laths, interlocked together through their entirelength and jointed together at the end by end locks mounted onspecially designed pipe shaft with brackets, side guides andarrangements for inside and outside locking with push and pulloperation complete including the cost of providing and fixingnecessary 27.5 cm long wire springs manufactured from hightensile steel wire of adequate strength confirming to IS: 4454 - part1 and M.S. top cover of required thickness for rolling shutters.80 x 1.25 mm M.S. laths with 1.25 mm thick top cover.

sqm 30.00

51 10.7 Providing and fixing ball bearing for rolling shutters. each 8.00

52 10.8.1 Extra for providing Mechanical device chain and crank operation foroperating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area.

sqm 30.00

Before Issue


After Receipt:





53 10.9 Extra for providing grilled rolling shutters manufactured out of 8 mmdia. M.S. bar instead of laths as per design approved byEngineer-in-Charge. (area of grill to be measured).

sqm 15.00

54 10.16.1 Steel work in built up tubular (round, square or rectangular hollowtubes etc.) trusses etc., including cutting, hoisting fixing in positionand applying a priming coat of approved steel primer, includingwelding and bolted with special shaped washers etc. complete.Hot finished welded type tubes.

kg 1550.00

55 10.18 Providing and fixing circular / Hexagonal cast iron or M.S. sheet boxfor ceiling fan clamp of internal dia 140 mm, 73 mm height, top lid of1.5 mm thick M.S. sheet with its top surface hacked for properbonding, top lid shall be screwed into the cast iron / M.S. sheet boxby means of 3.3 mm dia. round headed screws, one lock at thecorners. Clamp shall be made of 12 mm dia M.S. bar bent to shapeas per standard drawing.

each 20.00

56 10.25.2 Steel work welded in built up sections / framed work includingcutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works.

kg 3910.00

Total of Sub Head-10

Before Issue


After Receipt:





11 Flooring

57 11.3.1 Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, but excluding the cost of nosing ofsteps etc. complete.40mm thick with 20mm nominal size stone aggregate.

sqm 350.00

58 11.6.1 Cement plaster skirting up to 30 cm height with cement mortar 1 : 3(1 cement : 3 coarse sand) finished with a floating coat of neatcement.18 mm thick.

sqm 30.00

59 11.13.1 Providing and fixing glass strips in joints of terrazo / cementconcrete floors.40 mm wide and 4 mm thick.

metre 580.00

60 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conformingto IS : 15622 (thickness to be specified by the manufacture ) ofapproved make in all colours, shades except burgundy, bottlegreen, black of any size as approved by Engineer-in-Charge inskirting, risers of steps and dados over 12 mm thick bed of cementMortar 1 : 3 (1 cement : 3 coarse sand) and jointing with greycement slurry @ 3.3 kg per sqm including pointing in white cementmixed with pigment of matching shade complete.

sqm 140.00

Before Issue


After Receipt:





61 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm(thickness to be specified by the manufacturer) of 1st qualityconforming to IS : 15622 of approved make in colours such asWhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick CementMortar 1 : 4 (1 Cement : 4 Coarse sand) including pointing the jointswith white cement and matching pigment etc., complete.

sqm 45.00

62 11.41.2 Providing and laying vitrified floor tiles in different sizes (thicknessto be specified by the manufacturer ) with water absorption lessthan 0.08% and confirming to IS 15622 of approved make in allcolours and shades, laid on 20 mm thick cement mortar 1 : 4 ( 1cement : 4 coarse sand ) including grouting the joints with whitecement and matching pigments etc., complete.Size of Tile 600 x 600 mm

sqm 510.00

63 11.46.2 Providing and laying vitrified floor tiles in different sizes (thicknessto be specified by manufacturer ) with water absorption less than0.08% and confirming to IS 15622, of approved make in all coloursand shades, in skirting, riser of steps, over 12 mm thick bed ofcement mortar 1 : 3 ( 1 cement : 3 coarse sand ) including groutingthe joint with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm

sqm 55.00


Before Issue


After Receipt:





12 Roofing

64 12.22 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 gradedstone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1 : 3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edgesand making and finishing the outlet complete.

each 18.00

65 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermalexpansion,(i) Single socketed pipes.110 mm diameter

metre 150.00

66 12.42.1.2 Providing and fixing on wall face unplasticised - PVC mouldedfittings / accessories for unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler110 mm

each 15.00

Before Issue


After Receipt:





67 12.42.6.2 Providing and fixing on wall face unplasticised - PVC mouldedfittings / accessories for unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe

each 15.00

68 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approveddesign to unplasticised - PVC rain water pipes by means of 50 x 50x 50 mm hard wood plugs, screwed with M.S. screws of requiredlength, including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm

each 80.00


13 Finishing

69 13.4.1 12 mm cement plaster of mix : 1 : 4 (1 cement : 4 Coarse sand)

sqm 640.00

70 13.5.1 15 mm cement plaster on the rough side of single or half brick wallof mix :1 : 4 (1 cement : 4 Coarse sand)

sqm 1700.00

71 13.16.1 6 mm cement plaster of mix : 1 : 3 (1 cement : 3 fine sand)

sqm 2685.00

Before Issue


After Receipt:





72 13.18 Neat cement punning. sqm 200.00

73 13.22 Extra for plastering exterior walls of height more than 10 m fromground level for every additional height of 3 m or part thereof.

sqm 1850.00

74 13.23.1 Extra for plastering on circular work not excedding 6 m in radius :In one coat

sqm 1.00

75 13.38 Satna lime wash on walls with one coat. sqm 775.00

76 13.41.1 Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade :New work (two or more coats) over and including water thinnablepriming coat with cement primer.

sqm 2515.00

77 13.56.1 Painting (two or more coats) on rain water, soil, waste and ventpipes and fittings with synthetic enamel paint of approved brandand manufacture and required colour over a priming coat ofapproved steel primer on new work.100 mm diameter pipes

metre 235.00

Before Issue


After Receipt:





78 13.61.1 Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work

sqm 500.00

79 13.80 Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacture, over theplastered wall surface to prepare the surface even and smoothcomplete.(Make : J.K, Birla)

sqm 2505.00


15 Dismantling & Demolishing

81 15.7.4 Demolishing brick work manually / by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

cum 10.00


Before Issue


After Receipt:





16 Road work

82 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5cm. depth, dressing to camber and consolidating with road rollerincluding making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth lead upto 50 metres.

sqm 1300.00

83 16.3.2 Supplying and stacking at site. 63 mm to 45 mm size stone aggregate.

cum 100.00

84 16.3.3 Supplying and stacking at site.53 mm to 22.4 mm size stone aggregate.

cum 100.00

85 16.3.6 Supplying and stacking at site. Stone screening 13.2 mm nominal size (Type A)

cum 45.00

86 16.3.7 Supplying and stacking at site. Stone screening 11.2 mm nominal size (Type B)

cum 45.00

87 16.3.10 Supplying and stacking at site.Moorum

cum 15.00

Before Issue


After Receipt:





88 16.4 Laying, spreading and compacting stone aggregate of specifiedsizes to WBM specifications in uniform thickness, hand picking ,rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages toproper grade and camber, applying and brooming requisite type ofscreening / binding material to fill up interstices of coarse aggregatewatering and compacting to the required density .

cum 190.00

89 16.46.1 Providing and laying in position bitumen hot sealing compound forexpansion joints etc. Using grade ‘A’ sealing compound.

per cm depth per cm width

per m length

2900.00

90 16.68 Providing and laying 60 mm thick factory made cement concreteinterlocking paver block of M -30 grade made by block makingmachine with strong vibratory compaction of approved size anddesign & shape laid in required colour and pattern over andincluding 50 mm thick compacted bed of coarse sand, filling thejoints with coarse sand etc. all complete as per the direction ofEngineer-in-charge.

sqm 75.00

91 16.69 Providing and laying at or near ground level factory made kerbstone of M-25 grade cement in position to the required line, leveland curvature jointed with cement mortar 1 : 3 (1 cement : 3 coarsesand) including making joints with or without grooves (thickness ofjoints except at sharp curve shall not to more than 5 mm) includingmaking drainage opening wherever required complete etc. as perdirection of Engineer-in-charge (length of finished kerb edging shallbe measured for payment). (Precast C.C. kerb stone shall beapproved by Engineer-in-charge).

cum 45.00


Before Issue


After Receipt:





17 Sanitary Installations

92 17.2.1 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manuallycontrolled device (handle lever), conforming to IS : 7231, with allfittings and fixtures complete, including cutting and making good thewalls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each

each 8.00

93 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making goodthe walls wherever require :White Vitreous China Wash basin size 630 x 450 mm with a single15 mm C.P. brass pillar tap.

each 8.00

94 17.8 Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes andfittings.

each 8.00

95 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basinincluding P.V.C. waste fittings complete.Flexible pipe32 mm dia

each 18.00

Before Issue


After Receipt:





96 17.31 Providing and fixing 600 x 450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete.

each 8.00

97 17.34.1 Providing and fixing toilet paper holder : C.P. brass

each 8.00

98 17.35.1.1 Providing and fixing soil, waste and vent pipes : 100 mm diaSand cast iron S&S pipe as per IS: 1729

metre 85.00

99 17.35.2.1 Providing and fixing soil, waste and vent pipes : 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729

metre 90.00

Before Issue


After Receipt:





100 17.37.1 Providing and fixing M.S. holder-bat clamps of approved design toSand Cast iron/cast iron (spun) pipe embedded in and includingcement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe

each 60.00

101 17.37.2 Providing and fixing M.S. holder-bat clamps of approved design toSand Cast iron/cast iron (spun) pipe embedded in and includingcement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including cost of cutting holes and making good the walls etc. :For 75 mm dia pipe

each 50.00

102 17.38.1.1 Providing and fixing bend of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diaSand cast iron S&S as per IS - 1729

each 22.00

103 17.38.2.1 Providing and fixing bend of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete.75 mm dia Sand cast iron S&S as per IS - 1729

each 22.00

Before Issue


After Receipt:





104 17.39.1.1 Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729

each 55.00

105 17.39.2.1 Providing and fixing plain bend of required degree. 75 mm dia Sand cast iron S&S as per IS -1729

each 27.00

106 17.40.1.1 Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729

each 30.00

107 17.40.2.1 Providing and fixing heel rest sanitary bend 75 mm dia Sand cast iron S&S as per IS - 1729

each 10.00

108 17.43.1.1 Providing and fixing single equal plain junction of required degreewith access door, insertion rubber washer 3 mm thick, bolts andnuts complete. 100 x 100 x 100 mmSand cast iron S&S as per IS - 1729

each 10.00

Before Issue


After Receipt:





109 17.43.2.1 Providing and fixing single equal plain junction of required degreewith access door, insertion rubber washer 3 mm thick, bolts andnuts complete. 75 x 75 x 75 mm Sand cast iron S&S as per IS - 1729

each 10.00

110 17.44.2.1 Providing and fixing single equal plain junction of required degree : 75 x 75 x 75 mm Sand cast iron S&S as per IS - 1729

each 14.00

111 17.56.1.1 Providing and fixing terminal guard: 100 mmSand cast iron S&S as per IS - 1729

each 6.00

112 17.56.2.1 Providing and fixing terminal guard: 75 mm Sand cast iron S&S as per IS - 1729

each 4.00

113 17.57.1.1 Providing and fixing collar: 100 mmSand cast iron S&S as per IS - 1729

each 12.00

Before Issue


After Receipt:





114 17.57.2.1 Providing and fixing collar: 75 mm Sand cast iron S&S as per IS - 1729

each 18.00

115 17.58.1 Providing lead caulked joints to sand cast iron / centrifugally cast(spun) iron pipes and fittings of diameter: 100 mm

each 100.00

116 17.58.2 Providing lead caulked joints to sand cast iron / centrifugally cast(spun) iron pipes and fittings of diameter: 75 mm

each 65.00

117 17.60.2.2 Providing and fixing trap of self cleansing design with screweddown or hinged grating with or without vent arm complete, includingcost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729

each 28.00

Before Issue


After Receipt:





118 17.65.1 Painting sand cast iron / centrifugally cast (spun) iron soil, wastevent pipes and fittings with two coats of synthetic enamel paint ofany colour such as chocolate grey, or buff etc. over a coat of primer(of approved quality) for new work:100 mm diameter pipe

metre 85.00

119 17.65.2 Painting sand cast iron / centrifugally cast (spun) iron soil, wastevent pipes and fittings with two coats of synthetic enamel paint ofany colour such as chocolate grey, or buff etc. over a coat of primer(of approved quality) for new work:75 mm diameter pipe

metre 90.00

120 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved qualityand colour. weighing not less than 105 gms.

each 8.00

121 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingarrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mmand effective height of 88 mm, weighing not less than 190 gms.

each 8.00

122 17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and36 mm height of approved quality and colour, Weighing not lessthan 300 gms.

each 8.00


Before Issue


After Receipt:





18 Water Supply

123 18.10.2 Providing and fixing G.I. pipes complete with G.I. fittings andclamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore

metre 60.00


metre 90.00


metre 83.00


metre 76.00

127 18.11.1 Providing and fixing G.I. pipes complete with G.I. fittings andclamps, i/c making good walls etc. concealed pipe includingpainting with anti corrosive bitumastic paint, cutting chases andmaking good the wall :15 mm dia nominal bore

metre 80.00

Before Issue


After Receipt:





128 18.11.2 Providing and fixing G.I. pipes complete with G.I. fittings andclamps, i/c making good walls etc. concealed pipe includingpainting with anti corrosive bitumastic paint, cutting chases andmaking good the wall :20 mm dia nominal bore

metre 80.00

129 18.12.1 Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. 15 mm dia nominal bore

metre 60.00


metre 60.00


metre 60.00


metre 50.00

Before Issue


After Receipt:






metre 250.00

134 18.13.1 Making connection of G.I. distribution branch with G.I. main offollowing sizes by providing and fixing tee, including cutting andthreading the pipe etc. complete : 25 to 40 mm nominal bore

each 2.00

135 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel ofapproved quality (screwed end) :25 mm nominal bore

each 8.00


each 10.00


each 2.00

Before Issue


After Receipt:





138 18.18.3 Providing and fixing ball valve (brass) of approved quality, High orlow pressure, with plastic floats complete :25 mm nominal bore

each 3.00

139 18.19.1.2 Providing and fixing gun metal non- return valve of approved quality(screwed end) : 25 mm nominal bore Vertical

each 1.00

140 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brassunions : 45 cm length 15 mm nominal bore

each 24.00

141 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

each 1.00

142 18.32.1 Constructing masonry Chamber 30 x 30 x 50 cm inside, in brickwork in cement mortar 1 : 4 (1 cement : 4 coarse sand) for stopcock, with C. I. surface box 100 x 100 x 75 mm (inside) with hingedcover fixed in cement concrete slab 1 : 2 : 4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/cnecessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5fine sand : 10 graded stone aggregate 40 mm nominal size ) andinside plastering with cement mortar 1 : 3 (1 cement : 3 coarsesand) 12 mm thick finished with a floating coat of neat cementcomplete as per standard design :With common burnt clay F.P.S.( non modular ) bricks of classdesignation 7.5

each 6.00

Before Issue


After Receipt:





143 18.38.1 Painting G.I. pipes and fittings with synthetic enamel white paintwith two coats over a ready mixed priming coat, both of approvedquality for new work : 15 mm diameter pipe

metre 60.00


metre 120.00


metre 150.00


metre 133.00

Before Issue


After Receipt:






metre 326.00

148 18.41.1 Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work : 15 mm diameter pipe

metre 60.00


metre 60.00


metre 60.00


metre 50.00

Before Issue


After Receipt:






metre 250.00

153 18.46.1 Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (Newwork) : 15 mm nominal bore

each 25.00


each 25.00


each 25.00


each 25.00

Before Issue


After Receipt:





157 18.48 Providing and placing on terrace (at all floor levels) polyethylenewater storage tank ISI : 12701 marked with cover and suitablelocking arrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base support fortank.

per litre 3000.00

158 18.49.1 Providing and fixing C.P. brass bib cock of approved qualityconforming to IS:8931 : 15 mm nominal bore

each 8.00

159 18.52.1 Providing and fixing C.P. brass stop cock (Concealed) of standarddesign and of approved make conforming to IS:8931. 15 mm nominal bore

each 4.00

160 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer andgeyser points of approved quality conforming to IS:8931 a) 15 mmnominal bore 15mm nominal bore

each 30.00

161 18.58.1.1 Providing and fixing PTMT grating of approved quality and colourcircular type. 100 mm nominal dia

each 24.00

162 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102 mm, height of 75 mm with concealed fittingarrangements, weighing not less than 106 gms.

each 8.00


Before Issue


After Receipt:





19 Drainage

163 19.1.2 Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete : 150 mm diameter

metre 150.00

164 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40 mm nominal size) all-roundS.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe

metre 150.00

165 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1complete with C.I. grating brick masonry chamber with water tightC.I. cover with frame of 300 x 300 mm size (inside) the weight ofcover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design : 100 x 100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5

each 4.00

166 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete :150 mm dia. R.C.C. pipe

metre 150.00

Before Issue


After Receipt:





167 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 gradedstone aggregate 40 mm nominal size) inside plastering 12 mm thickwith cement mortar 1:3 (1 cement : 3 coarse sand) finished withfloating coat of neat cement and making channels in cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size) finished with a floating coat of neatcement complete as per standard design : Inside size 90 x 80 cm and 45 cm deep including C.I. cover withframe (light duty) 455 x 610 mm internal dimensions total weight ofcover and frame to be not less than 38 kg (weight of cover 23 kgand weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5

each 15.00

168 19.8.1.1 Extra for depth for manholes :Size 90 x 80 cm With common burnt clay F.P.S. (non modular)bricks of class designation 7.5

metre 5.00

Before Issue


After Receipt:





169 19.16 Providing orange colour safety foot rest of minimum 6 mm thickplastic encapsulated as per IS : 10910 on 12 mm dia steel barconforming to IS : 1786 having minimum cross section as 23 mm x25 mm and over all minimum length 263 mm and width as 165 mmwith minimum 112 mm space between protruded legs having 2 mmtread on top surface by ribbing or chequering besides necessaryand adequate anchoring projections on tail length on 138 mm asper standard drawing and suitable to with stand the bend test andchemical resistance test as per specifications and havingmanufacture's permanent identification mark to be visible even afterfixing, including fixing in manholes with 30 x 20 x 15 cm cementconcrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size) complete as per design.

each 378.00

170 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm drybrick honey comb shaft with bricks and S.W. drain pipe 100 mmdiameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5

each 2.00


Before Issue


After Receipt:





21 Aluminium work

171 21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved makeconforming to IS : 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions,i.e. at top, bottom and sides with required EPDM rubber /neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge.(Glazing ,paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent ordyed to required shade according to IS : 1868, Minimum anodiccoating of grade AC 15)

kg 1600.00

172 21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved makeconforming to IS : 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions,i.e. at top, bottom and sides with required EPDM rubber /neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge.(Glazing ,paneling and dash fasteners to be paid for separately) :

kg 1820.00

Before Issue


After Receipt:





For shutters of doors, windows & ventilators including providing andfixing hinges / pivots and making provision for fixing of fittingswherever required including the cost of EPDM rubber / neoprenegasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to requiredshade according to IS : 1868, Minimum anodic coating of grade AC15)

173 21.2.2 Providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors,windows shutters and partition frames with C.P. brass / stainlesssteel screws etc. complete as per architectural drawings anddirections of engineer-in-charge. Pre-laminated particle board with decorative lamination on bothsides.

sqm 65.00

174 21.3.2 Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge. (Cost of aluminium snap beading shall be paidin basic item) : With float glass panes of 5.50 mm thickness

sqm 240.00

Before Issue


After Receipt:





175 21.4.1 Providing and fixing double action hydraulic floor spring ofapproved brand and manufacture conforming to IS : 6315, havingbrand logo embossed on the body / plate with double springmechanism and door weight upto 125 kg., for doors, including costof cutting floors ,embedding in floors as required and making goodthe same matching to the existing floor finishing and cover plateswith brass pivot and single piece M.S. sheet outer box with slideplate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.

each 0.00

176 21.8.1 Filling the gap in between aluminium frame & adjacent RCC / Brick / Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and direction ofEngineer-in-charge complete. Upto 5 mm depth and 5 mm width

metre 685.00

177 21.11.3 Providing and fixing stainless steel (SS 304 grade) adjustablefriction windows stays of approved quality with necessary stainlesssteel screws etc. to the side hung windows as per direction ofEngineer-in-charge complete. 355 x 19 mm (Jolly make or

equivalent make)

each 200.00

178 21.13 Providing and fixing 100 mm brass locks (best make of approvedquality) for aluminium doors including necessary cutting and makinggood etc. complete.

each 32.00

Before Issue


After Receipt:





179 21.16.1 Providing fixing aluminium round shape handle of outer dia 100 mmwith SS screws etc. complete as per direction of Engineer-in-chargeAnodized (AC 15 ) aluminium

each 130.00

180 21.17 Providing and fixing anodised aluminium grill (anodised transparentor dyed to required shade according to IS : 1868 with minimumanodic coating of grade AC 15) of approved design/pattern, withapproved standard section and fixed to the existing window framewith C.P. brass/ stainless steel screws @ 200 mm centre to centre,including cutting the grill to proper opening size for fixing andoperation of handles and fixing approved anodised aluminiumstandard section around the opening, all complete as perrequirement and direction of Engineer-in-charge. (Only weight ofgrill to be measured for payment).

kg 125.00


Before Issue


After Receipt:





22 Water Proofing

180 22.5 Providing and laying water proofing treatment in sunken portion ofWCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying : a) First layer ofslurry of cement @ 0.488 kg/sqm mixed with water proofing cementcompound @ 0.253 kg/sqm. This layer will be allowed to air cure for4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixedwith water proofing cement compound @ 0.126 kg/sqm. This layerwill be allowed to air cure for 4 hours followed with water curing for48 hours. The rate includes preparation of surface, treatment andsealing of all joints, corners, junctions of pipes and masonry withpolymer mixed slurry.

sqm 60.00

181 22.7.1 Providing and laying integral cement based water proofingtreatment including preparation of surface as required for treatmentof roofs, balconies, terraces etc consisting of following operations:a) Applying a slurry coat of neat cement using 2.75 kg/sqm. ofcement admixed with water proofing compound conforming to IS.2645 and approved by Engineer-in-charge over the RCC slabincluding adjoining walls upto 300 mm height including cleaning thesurface before treatment. b) Laying brick bats with mortar usingbroken bricks/brick bats 25 mm to 115mm size with 50% of cementmortar 1:5 (1 cement : 5 coarse sand) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement : 5 coarse sand ) admixed with water proofing compoundconforming to IS : 2645 and approved by Engineer-in-charge torequired slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs

sqm 465.00

Before Issue


After Receipt:





c) After two days of proper curing applying a second coat of cementslurry using 2.75 kg/ sqm of cement admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cementmortar of mix 1:4 (1 cement : 4 coarse sand) admixed with waterproofing compound conforming to IS : 2645 and approved byEngineer-in-charge including laying glass fibre cloth of approvedquality in top layer of plaster and finally finishing the surface withtrowel with neat cement slurry and making pattern of 300 x 300 mmsquare 3 mm deep. e) The whole terrace so finished shall beflooded with water for a minimum period of two weeks for curingand for final test. All above operations to be done in order and asdirected and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness atkhurra as 65 mm.


Total cost of DSR Items

Before Issue


After Receipt:



NON SCHEDULE ITEMS -CIVIL ENGINEERING WORKS (SCHEDULE II) Const. of SRE at Thanjavur (TN)


1 NS01 Providing and laying to the required pattern 18 mm minimum thickmirror polished (Best quality) granite stone slabs of approvedcolours on wall 20 mm (avg.) thick base with cement mortar 1 : 4 ( 1Cement : 4 Coarse sand) and jointed with white cement slurrymixed with pigment to match the shade of the slab includingrounding, rubbing, clamping, curing, moulding & polishing the theedges etc.to give high gloss finish complete. Note: Basic rate to be considered for polished granite slabsincluding cutting , transportation, wastages etc., at site should beRs. 2200/SQM

sqm 65.00

2 NS02 Providing and laying 18 mm minimum thick mirror polished granitestone slab of best quality of approved shade in treads/ risers ofsteps landing on 20 mm thick bed of cement mortar 1 : 4 (1cement: 4 fine sand) 12 mm thick backing of cement mortar 1 : 3 (1cement: 3 fine sand) and jointed with white cement slurry mixed withpigment or with standard tilemate compound to match the shade ofthe slab including rubbing and mirror polished, making groove asrequired etc. complete.Note: The stone slabs shall be cut to required size and laid to therequired pattern including rounding, chamfering, bull nosing of theedges as directed. Actual area of the slabs as laid shall bemeasured and paid.

sqm 135.00

Name of Work: Construction of Radar Cum Antenna Building, DG Housing Shed, OPS Building and allied works at IAFS Thanjavur

Before Issue

Corrections (CR):Cuttings (CT):Insertions (I):OverWrittings (OW): BOQ-CIVIL (NS) / 1

After Receipt


OverWrittings (OW):



3 NS03 Constructing manhole of size 1000 x1000 mm in side and 2000 mmdeep for OFC with brick work, cement concrete 1 : 2 : 4 (1 cement :2 coarse sand : 4 graded stne aggreget 20 mm nominal size), RCCtop cover slab with lifting handle as per the drawing attached 1 : 1.5: 3 mix (1 cement : 4 coarse sand : 4 graded stone aggregete 20mm ominal size), 50 mm lean concrete 1 : 4 : 8 (1 cement : 4coarse sand : 8 graded stone aggregete 40 mm nominal size),providing a 200 mm dia hole on the floor slab of manhole, 12 mmcement plaster finished with a floating coat of neat cement of mix 1: 6 ( 1 cement : 6 coarse sand) inside plastering on walls, 15 mmthick plaster on outter side only raised from NGL finished with afloating coat of neat cement of mix 1 : 6 ( 1 cement : 6 coarse sand)and 6 mm thick plaster on floor slab sloping towards 200 mm diahole with cement mortar 1 : 3 (1cement : 3 coarse sand) finishedwith floating coat of neat cement complete as per standard designincluding excavation in any type of soil, refilling of good earth anddisposal of excavated surplaus soil/ debries etc., complete as perspecification provided or as directed by the engineer in chargeincluding all materials & labours complete.

each 50.00

4 NS04 Laying of bricks flat length perpendicular to cable route i.e. approx 9bricks per meter of pipe.

metre 50.00

5 NS05 Supplying of 40 mm outside dia. HDPE pipe for OFC with nylonrope 4 mm thick inside HDPE pipe and laying the same in alreadyexcavated trench & HDPE pipe in 50 mm GI pipe at road crossing ,culverts etc., & clearing of main duct of foreign elements, clearingof water , foreign elements from man holes & sealing the ends asdirected by the engineer in charge. GI pipe will be measured andpaid separatly. The rate includes supply & fixing of HDPE pipejointing arrangement (Same make of HDPE pipe) push fit type atevery HDPE pipe joints and as directed by Engineer-in-charge.

metre 6800.00

Before Issue


After Receipt


OverWrittings (OW):



6 NS06 Excavation in trenches through horizantal boring at a depth of 2metre or more / less as required depth of laying HDPE pipe underthe road/soil/runway/taxiway to the required dia as per the drawingincluding dressing of sides as directed by Engineer-in-Charge.

metre 6600.00

7 NS07 Suppliying, placing / fixing in position of : Godrej make code No.TDU-3, Steel Side rack size (900 x 470 x 1169 mm).

each 2.00

8 NS08 Suppliying, placing / fixing in position of : Plain Godrej make steelCup board for office room of size (916 x 486 x 1981 mm).

each 1.00

9 NS09 Supply and fixing Wall mounted wooden tool board of size 1500 x1000 x 200 mm deep with openable glass shutter.

each 1.00

10 NS10 Suppliying, placing / fixing in position of : Godrej make No. PCH7002 D revolving chair Ergonomically designed.

each 5.00

11 NS11 Suppliying, placing / fixing in position of : Portable Aluminiumladder 3.04 meter height of best make directect by Engineer-in-Charge.

each 1.00

Before Issue


After Receipt


OverWrittings (OW):



12 NS12 Suppliying placing / fixing in position of : Office Table Godrej make,No. T-104.

each 2.00

13 NS13 Suppliying placing / fixing in position of : Office chair Godrej makeNo. PCH 7003 D.

Each 3.00

14 NS14 Supplying and fixing of stainless steel made first aid boxcontaining necessary medicines, cotton bandage and checkinginstruments as directed by the Engineer-in-charge.

Each 4.00

15 NS15 Supplying and fixing of laminated shock treatment chart for treatingperson suffering due to electrical shock, separate in English andHindi, pasted on good quality ply board or sheet and havng wallmounting arrangement, redable atleast from 50 feet distance or asdirected by the Engineer-in-charge.

Each 6.00

16 NS16 Supplying and fixing of dual language Caution board of 600 x 300mm size as directed by the Engineer-in-charge and printed in signalRed "Man On Line" also include a board "Dont Switch On".

Each 10.00

17 NS17 Supplying and fixing of Teak Wood Key board box of size 450 x 300 x 100 mm for approx 25 Nos. of Keys with front openable glassshutters hinged from side complete as directed by the Engineer-in-charge including polishing etc.

Each 3.00

18 NS18 Supplying of 10 mm thick 1.1 KV grade rubber mats of size 1.0 m x2.0 m and installation of the same as directed by engineer-in-charge.

Sqm 40.00

Before Issue


After Receipt


OverWrittings (OW):



19 NS19 Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL ANTI termite treatment and creating acontinuous chemical barrier under and alround the column pits, walltrenches, basement excavation, top surface of plinth filling, junctionof wall and floor, along the external perimeter of building, expansionjoints, over the top surface of consolidated earth on which flooringis to be laid, surroundings of pipes and conduits etc. complete asper specifications.(Plinth area of the building at ground floor only shall be measuredfor payment)Chlorpyriphos Emulsifiable E.C. 20% with 1%concentration.

sqm 475.00

20 NS20 Providing and fixing of RCC Pre cast route marker of 0.90 m. longin trapezoidal shape ( Base area 0.35 x 0.35 m and top area 0.15 x0.15 m) to be casted at site by using of steel form work with design mix M-25 including earth work ,100 mm thick PCC 1 : 5 : 10 (1cement : 5 coarse sand : 10 graded stone aggregate 40 mmnominal size) back filling and steel shuttering work and dulyengraved by SRE OFC on its one face as per drawing. The routemarker is to be raised to 0.60 m from NGL and duly painted byfloroscent paint of approved brand and colour.

each 200.00

21 NS21 Providing and fixing 1 mm thick Aluminium Sheet to door shuttersof toilets fixed with Stainless steel screws and cup washers as perdetails and as directed by Engineer-in-Incharge.

sqm 8.00

22 NS22 Making cable duct of size 600 x 600 mm including brick work andplastering and providing MS angle iron frame of size 50 x 50 x 6mm with 6 mm thick MS sheet cover with lifting handles, dulypainted with red oxide and synthetic enamel paint including primigcoat as per the drawing supplied or directed by the Engineer-in-charge.

metre 72.00

Before Issue


After Receipt


OverWrittings (OW):



23 NS23 Fixing of interface built up sections weighting approx 350 kg at aapprox 25 m height from ground level on top of antenna towerbuilding. Cost includes unloading of interface built up section fromtruck, lifting to the top of antenna tower, fixing in position, necessarywelding with steel of slab etc. complete. The interface builtupsections shall be supplied by the BEL at site free of cost.

each 1.00

24 NS24 Providing & fixing Indef brand Chain pully block of 1 Ton capacityincluding 25 m lift and 3 m working chain (i.e. 25 m length of loadchain and 6 m long working chain of single length), Indef brandMonorail horizontal travelling arrangement approx 5 m horizontallyof 1 Ton capacity including 3 working chain complete.

each 1.00

Providing and fixing of Armstrong Prima Dune Premier SquareEdge Mineral Fibre Ceiling Tiles in true horizontal level false ceilinggrid manufactured by M/s Armstrong World Industries USA/UK.Main tees of the false ceiling shall be of size 24 x 38 mm and madeout of 0.35 mm thick (min.) GI sheet provided at 1200 mm c/c andcross tees shall be of size 24 mm x 38 mm and made out of 0.35mm thick (min.) GI sheets between main tees so as to make a gridof 600 x 600 mm size and all exposed surfaces of tees shall havepowder coated finish as approved. Armstrong wall angle of size 15x 15 mm and with powder coated finish shall be provided all alongthe perimeter of the false ceiling. The whole grid system shall besuspended using 4 mm GI rod with necessary J hooks at every1200 mm intervals for the main tees.

sqm 345.0025 NS25

Before Issue


After Receipt


OverWrittings (OW):



Armstrong Prima Dune Premier square edge mineral fibre acousticceiling tiles of size 600 x 600 mm manufactured by M/s ArmstrongWorld Industries USA/UK having fire rating of 60 minutes as per BS476/23 of 1987, Light Reflectance of 83%, Noise reduction co-efficient (NRC) of 0.50 to 0.55, sound attenuation of 35db, Thermalconductivity of k=0.052 - 0.057 w/mk, weight of 3.5 Kgs/Sqm andhumidity resistance of RH-99% and of thickness 15 mm shall beprovided and placed on the grid system as directed. The rate toquoted shall include making cutouts for tube lights, spot lights ofspecified size etc., for which no extra will be paid separately. Rateshall also include for providing additional trimming around cutoutsfor light fittings etc., and also for providing additional supports fromceiling where main / cross members are cut for light fittings etc.,Actual area of false ceiling as seen in the plan will be measured.

26 NS26 Providing and fixing approved quality (VISTA, Hunter Douglas or

equivalent standard makes horizontal Venetian blinds) ofapproved colour and shade made out of 25 mm wide springtempered aluminium alloy slats with pretreatment coating andpolyster backed enamel finish. The head rail and the bottom railshall also be of 25mm wide roll formed in colours to match with theslats. The cord locks shall have a stainless steel/ brass acrylic mainroller with a locking mechanism which will get locked automaticallyon release of the chord. The tilting mechanism will be made ofacrylic wand for opening and closing of the blind.

Sqm 25.00

27 NS27 Providing and fixing approved quality PVC nylon buffers to the doorshutters with necessary screws or on wall with wooden plugs andscrews as required and as directed by Engineer complete.

each 50.00

25 NS25

Before Issue


After Receipt


OverWrittings (OW):



28 NS28 Providing and fixing homogeneous Polyvinyl chloride sheet inflooring and skirting in approved pattern on a smooth, dust free anddamp proof base using rubber based adhesives of approved qualityrecommended by manufacturer including rolling with light woodenroller weighing about 5 kg. all complete as directed by Engineer-in-Charge, in approved colour and shade 2 mm thick sheet.

Sqm 45.00

29 NS29 Providing and fixing Anti static homogeneous Polyvinyl chloridesheet in flooring and skirting in approved pattern on a smooth anddamp proof base using rubber based adhesives of approved qualityrecommended by manufacturer including rolling with light woodenroller weighing about 5 kg. all complete as directed by Engineer-in-Charge, in approved colour and shade. 2mm thick sheet

sqm 200.00

30 NS30 Supply and installation of the : Carbon dioxide fire extinguisher of 2kg (SAFEX or CEASEFIRE make) each as per IS- 15683-2006 andmounting the same on hook on wall as required.

Each 17.00

31 NS31 Supply and installation of the : Dry Chemical fire extinguisher of 6kg (SAFEX or CEASEFIRE make) each as per IS- 15683-2006 andmounting the same on hook on wall as required.

each 10.00

32 NS32 Supply and installation of the : Mechanical foam type fireextinguisher of 9 ltr. Capacity ( SAFEX or CEASEFIRE make) eachand mounting the same on hook on wall as required.

each 10.00

Before Issue


After Receipt


OverWrittings (OW):



33 NS33 Supply and installation of Fireman axe with insulated handleincluding a wooden box of size 600 x 600 mm to accommodate thefire man axe with glazed single shutter, proper lock and keyarrangement and all surface area finished with french spirit polish,after that only exposed area will be finished with laqer as perdrawing or as directed by the Engineer-in-charge.

each 6.00

34 NS34 Supply and installation of the:GI fire bucket of 9 litre capacity ofheavy gauge.

each 18.00

35 NS35 Providing and fixing CI cover with frame (Light Duty) 455 x 610 mminternal dimensions. Total weight of cover with frame 38 Kgincluding primer and two or more coats of approved paints. (Weightof cover 23 Kg and weight of frame 15 Kg).

each 6.00

36 NS36 Appling one coat of TAPECRETE-P151 Acrylic polymer modifiedcementitious slurry over the surface up to the height of 6 inchesfrom the base.Tapecrete slurry will be made in the ratio of 1 kgtapecrete : 2 kg cement by weight. After applying the first coat thesurface should be kept untouched for 4 hours. Appling second coatof TAPECRETE-P151- Acrylic polymer modified cementitiousslurry over the first coating in the same manner and letting it to dryfor the same period of time. including Cleaning the surface by themenace of wire bush to make the surface free from all looseparticles, dust ect. Fill all construction joints and at critical points byTAPECRETE-P151 and cement putty. Size of the fillet can beincreased as per the requirement or repairing of the wall in thesame manner.(Make : cico)

sqm 1150.00

37 NS37 Supplying of Araldite GY-257 in sealed container at site. kg 20.00

Before Issue


After Receipt


OverWrittings (OW):



38 NS38 Supplying of Hardener HY-850 in sealed container at site. kg 20.00

39 NS39 Applying two thin coats of Araldite GY-257 with Hardener HY-850 inthe proportion recommended by the manufacturer and as directedby the Engineer-in-charge. Note : Araldite & Hardener shall be paid in basic item.

sqm 25.00

40 NS40 Supplying and fixing Welded steel wire mesh of opening size 1.25 x1.25 inches made of 16 gauge thickness of wire including paintedwith two or more coats of synthetic enamel paint of approved shadeover a coat of primer. The welded wire mesh to be fixed on steelframe. (The payment of steel frame shall be made separetely).

kg 300.00

41 NS41 Providing and fixing stainless steel railing consisting of 50 mm diapipe, 16 gauge, grade 316 as hand rail fixed in stainless steelclamps grouted in walls as required including other fittings andaccessories as required as per drawings and as per direction ofEngineer-in-charge.

kg 525.00

42 NS42 Forming groove of uniform size from 12 x 12 mm and upto 25 x 15mm in plastered surface as per approved pattern using woodenbattens, nailed to the under layer including removal of woodenbattens, repairs to the edges of plaster panel and finishing thegroove complete as per specifications and direction of the Engineer-in-Charge.

metre 1560.00

Before Issue


After Receipt


OverWrittings (OW):



NS43 Providing and fixing 3mm thick interior grade ACP Cladding ofapproved make in Desired Colour. The basic frame work shall becreated by 38 mm x 25 mm x 2 mm thick extruded AluminiumRectangular tube as manufactured by Standard Aluminium sectionof approved make in the vertical and horizontal plane of theCladding. The extruded Aluminium tube shall be provided withAluminium extruded Angle (BRACKETS) of 38 x 25 x 4 mm thick oras may be required as site at respective locations. Fixing of thebasic frame work shall be done by drilling holes by an electric drill inthe masonary / reinforced cement concrete inserting 50 mm longNylon sleeves & 10 x 25 or 50 or 75 mm long stainless steel CSKWooden Screw wherever the basic frame work require to be fixedwith stainless steel self taping screws.

sqm 160.00

The Aluminium composite Panel shall be fabricated & fixed directon to the extruded aluminium frame work. A layer of 24 density x 50mm thick fibre glass wool shall be inserted and covered with RPtissue and held in place using wire mesh before fixing the excelsiorpanels. The joint groves between the Aluminium Composite Panelshall be aligned vertically & horizontally & sealed with "Non-Staning" Silicon Weather Sealent of Dow Corning/ GE Silicon.

44 NS44 Providing and fixing G.I. hood of cross-sectional size as 300 x 300mm and size in L-shape 150 x 150 mm and as per drawing.

each 10.00

45 NS45 Add or deduct for providing extra / less depth of OFC Manhole.Note : This item is to be paid/deduct over and above item for OFCManhole.

metre 20.00

43

Before Issue


After Receipt


OverWrittings (OW):



46 NS46 Providing and fixing not less than 0.5 mm thick trackdeck 1000 mmwide Hi-Rib-100 Galvalume high tensile cold rolled steel roofingsheets / north light curves / ridges of taurus blue or any otherapproved colour and in required lengths having a yield strenth of550 Mpa as per IS-1397 having Galvalume coating class AZ-150(minimum 150 gram per Sqm total zinc- Aluminium alloy coating onboth sides). The sheets shall be fixed to the purlins with suitableover laps in longitudinal and lateral directions and by providing selffit fasteners along with EPDM washers and Polysulphide sealant asper manufacturers specifications.Note : Actual area of sheets including ridges as laid will bemeasured for payment.

sqm 100.00

47 NS47 Providing and fixing of Hooks / Hangers of CP brass in WC forhanging cloth.

each 8.00

48 NS48 Providing and fixing of Health Faucet in WC of make Hindware, cat.No.- F160023 or equivalent make.

each 8.00

49 NS49 Finishing exterior walls with water based weather proof emulsion ofmanufacturer Asian paints (Apex Ultima) or equivalent of requiredshade to give an even shade as approved by Engineer-in-Charge :New work (two or more coats) including priming coat of cementprimer of same brand.

Sqm. 2050.00

Before Issue


After Receipt


OverWrittings (OW):



50 NS50 Providing and fixing on wall semi perforated tiles 600 x 600 x 12mm panelling fxed on wooden frame work of hollock woodconsisting of battens 50 x 25 mm in a grid of 600 x 600 mm fixedwith rawl plug and drilling necessary holes for rawl plug etc.including priming coat complete as directed by engineer in charge.A layer of 24 density x 50 mm thick fibre glass wool shall beinserted in grid and covered with RP tissue and held in place usingwire mesh before fixing the tiles.

Sqm 140.00

51 NS51 Providing and fixing 12 mm thick bison board with approved brandand quality duly painted with Synthetic enamel paint of approvedshade in two or more coates over priming coat as per direction ofEngineer-in charge.

Sqm. 30.00

52 NS52 Providing and fixing aluminium handle 125 mm long with rubbergutka and steel screw for aluminium windows complete as perdirection of Engineer-in charge.

each 120.00

53 NS53 Providing and fixing white vitreous china flat back half stall urinal ofsize 610 x 410 x 380 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders withunions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brassincluding painting of fittings and cutting and making good the wallsand floors wherever required Single half stall urinal with 5 litreP.V.C. automatic flushing cistern.

Each 8.00

54 NS54 18 mm cement plaster in two coats under layer 12 mm thick cementplaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 3 (1 cement : 3 fine sand).

Sqm. 1200.00

Before Issue


After Receipt


OverWrittings (OW):



55 NS55 Providing and laying 4 mm thick ply over 25 mm thick foam overpvc flooring to protect the surface of PVC flooring.Note : PVC flooring to be measured seperately.

Sqm. 220.00

56 NS56 Providing and fixing signboard on brick masonry wall of size 450 x100 x 4 mm made of white colour acrylic sheet indicating floorswritten by sticker with suitable sizes of 60 x 400 mm and colourrecommended by Engineer-In-Charge at each floor.

each 10.00

57 NS57 Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with PVC / neoprene gasket etc.complete as per architectural drawings and the directions ofengineer-in-charge (cost of aluminium snap beading shall be paidin basic item) with frosted glass panes of 6.00 mm thickness.

Sqm 15.00

58 NS58 Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with PVC / neoprene gasket etc.complete as per architectural drawings and the directions ofengineer-in-charge (cost of aluminium snap beading shall be paidin basic item) with tinted glass panes of 6.00 mm thickness.

sqm 20.00

59 NS59 Providing and fixing of chicken wire mesh at all internal side thebuilding joints of brick and RCC with a overlapping of 150 mm oneach side of joint .The wire mesh should be fixed on wall and RCCsurfaces using small nails in conjunction with first coat of roughplastering to prevent cracks as conjunction of brick masonry walland RCC work.

Sqm 460.00

60 NS60 Supplying and hand over of Armstrong Prima Dune Premier SquareEdge Mineral Fibre Ceiling tiles of size 600 x 600 mmmanufactured by M/s Armstrong World Industries USA/UK.

Sqm 4.32

Before Issue


After Receipt


OverWrittings (OW):



61 NS61 Supplying and hand over of semi perforated tiles of size 600 x 600x 12 mm.

Sqm 4.32

62 NS62 Supplying and hand over of vitrified flooring tiles of size 600 x 600mm.

Sqm 2.88

63 NS63 Supplying and hand over of Ist quality ceramic glazed wall tiles. Sqm 0.90

64 NS64 Supplying and hand over of Ceramic glazed floor tiles of size 300 x300 mm.

Sqm 1.08

65 NS65 Deduct for using extra cement in the items of design mix over andabove the specified cement content therein.

Quintal -190.00

66 NS66 Extra for camouflaging painting as per pattern and design approvedby Engineer-in Charge. This item shall be paid over and above itemno. NS 49 of this Sub Head.

Sqm. 2050.00

67 NS67 Providing and fixing Gun metal Ball valve 15 mm nominal bore ofISI make.

each 27.00

68 NS68 Providing and fixing CP brass wall / basin mixer 15 mm nominalbore of approved make.

each 2.00

Before Issue


After Receipt


OverWrittings (OW):



69 NS69 Cutting existing bituminous / cement concrete road of requireddepth and making good the cement concrete 1:2:4 ( 1 cement : 2sand : 3 stone aggregate 20 mm) including supply of extraquantities of materials i. e. aggregate, moorum, screening, red bajriand labour required.

cum 20.00

70 NS70 Providing and fixing stainless steel 30gX20 mesh mosquito mesh

on openings of doors, windows, ventilators, shutters and Partitionsetc. with suitable aluminium section frame complete as per thearchitectural drawings and the directions of engineer-in-charge.(Cost of aluminium section etc. shall be paid in basic item).

sqm 100.00

71 NS71 Supply and fixing on the door of radium paper PUSH or PULLsticker of required size as per direction of engineer incharge.

each 104.00

72 NS72 Supplying and planting of grass including providing, mixing andspreading of good earth cow dung (sludge), fertiliser and othermaterial required to develop the grass with watering andmaintenance of the lawn for 30 days or more till the grass forms athick lawn, free from weeds and fit for mowing as per direction ofEngineer in charge.

sqm 2000.00

73 NS73 Extra for providing and mixing water proofing material in cementplaster work in proportion recommended by the manufacturers.

Kg 395.00

Total of NS Items

Before Issue


After Receipt


OverWrittings (OW):

CPWD DSR-2012 ITEMS-ELECTRICAL ENGINEERING WORKS (SCHEDULE III) Const. of SRE at IAFS Thanjavur (TN)

Sl.No. Code DESCRIPTION Unit Qty.

Rate (Rs.) in

figuresRate (Rs.) in words Amount (Rs.)

POINT WIRING

COPPER WIRING IN STEEL CONDUIT

Point wiring in Steel conduit , with modular type switch:

1 1.3.3 Wiring for light point /fan point /exhaust fan point /call bell point with 1.5 sq.mm. FR PVC insulated, copper conductor single core cable insurface/recessed steel conduit, with modular switch, modular plate, suitable GIbox and earthing the point with 1.5 sqmm. FR PVC insulated copper conductorsingle core cable etc as required. Group C.

Point 170

Twin control point wiring in steel conduit with modular type switch :

2 1.4 Wiring for twin control light point with 1.5 sq. mm. FR PVC insulated, copperconductor single core cable in surface/recessed steel conduit, 2 way modularswitch, modular plate, suitable GI box and earthing the point with 1.5 sqmm.FR PVC insulated copper conductor single core cable etc as required. Point 14

Power plug point wiring in steel conduit (2x4 sq. mm.) :

3 1.5 Wiring for light / power plug with 2x4 sq. mm. FR PVC insulated, copperconductor, single core cable in surface/ recessed steel conduit along with 1no. 4 sq. mm. FR PVC insulated copper conductor single core cable for loopearthing as required.

Meter 600

Name of Work: Construction of Radar Cum Antenna Building, DG Housing Shed, OPS Building at IAFS Thanjavur

SUBHEAD-1

Before Issue

Corrections(CR):Cuttings (CT):Over Writting (OW):Insertions (I): BOQ-ELECTRICAL (DSR) /1

After Receipt

corrections(CR):Cuttings (CT):




Rate (Rs.) in


Circuit/ submain wiring in Steel Conduit:

4 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizesof FRPVC insulated copper conductor, single core cable in surface/ recessedsteel conduit as required.

a 1.7.2 2 X 2.5 sq. mm. + 1 X 2.5 sq. mm. Earth wire Meter 400

b 1.7.4 2 X 6 sq. mm. + 1 X 6 sq. mm. Earth wire Meter 200

c 1.7.9 4 X 6 sq. mm. + 2 X 6 sq. mm. Earth wire Meter 100

d 1.7.10 4 X10 sq. mm. + 2 X 10 sq. mm. Earth wire Meter 175

e 1.7.11 4 X 16 sq. mm. + 2 X 16 sq. mm. Earth wire Meter 80

S/F Light plug point modular type accessories:

5 1.31 Supplying and fixing suitable size GI box with modular plate and cover in fronton surface or in recess, including providing and fixing 3 pin 5/6 amps modularsocket outlet and 5/6 amps modular switch, connection etc as required. (Forlight plugs to be used in non residential building). Each 15

Before Issue


After Receipt





Rate (Rs.) in


S/F Power plug point modular type accessories:

6 1.32 Supplying and fixing suitable size GI box with modular plate and cover in fronton surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 ampsmodular socket outlet and 15/16 amps modular switch, connection etc asrequired. Each 35

S/F 20A SPN MCB industrial socket outlet :

7 2.18 Supplying and fixing 20 amp, 240 volts, SPN industrial type socket outlet, with2 pole and earth, metal enclosed plug top along with 20 amp 'C' series, SP,MCB, in sheet enclosure, on surface or in recess, with chained metal over forthe socket out let and complete with connection, testing and commissioningetc as required. (Note: The industrial type socket outlet with enclosure is

required to be fixed near the split AC indoor unit while the controlling SP

MCB is to be provided at 1200 mm. height from FFL, in seperate

enclosure below that split AC indoor unit.)

Each 16

S/F 30A TPN MCB industrial socket outlet :

8 2.20 Supplying and fixing 30amps, 415 volts, TPN industrial type socket outlet, with4 pole and earth, metal enclosed plug top along with 30 amps 'C' series, TPMCP, in sheet enclosure, on surface or in recess, with chained metal cover forthe socket out let and complete with connections, testing and commissioningetc as required.

Each 5

SUBHEAD-1 TOTAL

Before Issue


After Receipt





Rate (Rs.) in


CONDUITING AND WIRING FOR TELEPHONE

Note : Rates of only ISI marked conduits have to be taken in the following items.Unless and otherwise specified, only such conduits shall be used in the work.

S/F steel conduit :

9 1.20 Supplying and fixing of following sizes of steel conduit along with theaccessories in surface/recess including painting in case of suface conduit, orcutting the wall and making good the same in case of recessed conduit asrequired :

a 1.20.2 25 mm Meter 400

b 1.20.4 40mmMeter 90

SUBHEAD-2 TOTAL

SUPPLY & INSTALLATION OF LIGHTING FIXTURES & FANS

Note : Rates of only ISI marked conduits, cables, switches and socket outlets havebeen taken in the following relevant items. Unless and otherwise specified,only such conduits, cables, switches and socket outlets shall be used in thework.

ITC fluorescent fitting directly on surface:

10 1.41 Installation, testing and commissioning of prewired, fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tubeetc. directly on ceiling / wall, including connections with 1.5 sq. mm. FR PVCinsulated, copper conductor, single core cable and earthing etc. as required. Each 150

SUBHEAD 3

SUBHEAD 2

Before Issue


After Receipt





Rate (Rs.) in


Erection of incandescent Light fittings :

11 1.35 Erection of Wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS Lamps per fitting , complete with all accessories includingconnections etc. as required. Each 18

ITC Ceiling fan with cover on fan box :

12 1.45 Installation, testing and commissioning of ceiling fan, including wiring the downrod of standard length (up to 30 cm) with 1.5 sq mm FR PVC insulated copperconductor, single core cable, including providing and fixing phenolic laminatedsheet cover on the fan box etc. as required etc. as required. Each 17

ITC exhaust fan up to 450 mm sweep

13 1.50 Installation of exhaust fan up to 450 mm sweep in the existing opening ,including making good the damage, connection, testing and commissioningetc. as required.

1.50.1 Upto 450 mm sweep Each 13

Fixing louvres /shutters for exhaust fan

14 1.51 Extra for fixing louvres/shutters complete with frame for a exhaust fans of allsizes. Each 13

SUBHEAD-3 TOTAL

Before Issue


After Receipt





Rate (Rs.) in


SPN DISTRIBUTION BOARDS

Note Rate of only ISI marked MCBs fuses have to be taken in the following items.Unless and otherwise specified, only such MCB's as mentioned in the List ofapproved materials shall be used in the work.

S/F SP MCB DB :

15 2.7 Supplying and fixing of following way prewired, single pole and neutral, MCBdistribution board of sheet steel for 240 Volts, on surface/recess, Completewith loose wire box, terminal connectors for all incoming and outgoing circuits,duly prewired with suitable size FRPVC insulated copper conductor uptoterminal blocks, tinned copper busbar , neutral link,earth bar , din bar,detachable gland plate, interconnections, powder painted including earthingetc as required. (But without MCB / RCCB / Isoator)

a 2.7.6 12 way Double doorEach 9

S/F 'B/C' series, SP MCB :

16 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' curve,miniature circuit breaker suitable for inductive loads of following poles in theexisting MCB DB complete with connections, testing and commissioning etc.as required :

a. 2.10.1 Single pole Each 100

SUBHEAD 4

Before Issue


After Receipt





Rate (Rs.) in


SP MCB blanking plate :

17 2.11 Supplying and fixing single pole blanking plate in the existing MCB DBcomplete etc. as required. Each 25

S/F TP MCB Isolator :

18 2.13 Supplying and fixing following rating ,four pole, 415 volts, Isolator in theexisting MCB DB complete with connections, testing and commissioning etc.as required :

a 2.13.2 63 amps Each 2

19 2.12 Supplying and fixing following rating, double pole, 240 volts, Isolator in theexisting MCB DB complete with connections, testing and commissioning etc.as required :

a 2.12.1 40A Each 9S/F SPN RCCB :

20 2.14 Supplying and fixing following rating, double pole (single phase and neutral)240 volts, residual current circuit breaker (RCCB), having a sensitivity currentup to 300 milli amperes in the existing MCB DB complete with connections,testing and commissioning etc as required.

a. 2.14.1 25 amps Each 9

SUBHEAD-4 TOTAL

Before Issue


After Receipt





Rate (Rs.) in


CABLE WORK

21 7.7 Laying and fixing of one number PVC insulated and PVC sheathed / XLPEaluminium conductor power cable of 1.1 KV grade of following size surface asrequired.

a 7.7.1 upto 35 sqmm (Clamped with 1 mm thick saddle)

RM 330

b 7.7.2 above 35 sqmm and upto 95 sqmm (clampled with 25x3 mm MS flat clamp)

RM 150

c 7.7.4 above 185 sqmm and upto 400sqmm (clampled with 40x3 mm MS flat clamp)

. RM 100

22 7.5 Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of1.1 KV grade of following size in the existing RCC/ Hume/ stoneware/ Metalpipe as required.

a 7.5.1 upto 35 sqmmRM 50

b 7.5.2 above 35 sqmm and upto 95 sqmmRM 50

c 7.5.4 above 185 sqmm and upto 400sqmmRM 20

SUBHEAD 5

Before Issue


After Receipt





Rate (Rs.) in


Cable Laying

23 7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of1.1 KV grade of following size direct in ground including excavation, sandcushioning, protective covering and refilling the trench etc. as required.

a 7.1.1 upto 35 sqmmRM 280



24 7.1 Laying of one number additional PVC insulated and PVC sheathed/XLPEpower cable of 1.1 KV grade of following size exceeding direct in ground inthe same trench in one tier horizontal formation including excavation, sandcushioning, protective covering and refilling the trench etc. as required.

a 7.1.1 upto 35 sqmm RM 50



Before Issue


After Receipt





Rate (Rs.) in


25 9.1 Supplying & making indoor end terminations with brass compression glandand aluminium / copper lugs (for copper cables) for PVC insulated and PVCsheathed Aluminium / Copper conductor cable of 1.1 KV grade of the followingsizes as required.

a 9.1.1 2x6 sqmm Each 8

b 9.1.20 3.5x25 sqmm Each 8

c 9.1.22 3.5x50 sqmm Each 15

d 9.1.23 3.5x70 sqmm (Copper) Each 10

e 9.1.30 3.5x300 sqmm Each 20

f 9.1.32 4x10 sqmm Each 26

g 9.1.35 4x35 sqmm (Copper)Each 4

SUBHEAD-5 TOTAL

Before Issue


After Receipt





Rate (Rs.) in


FIRE ALARM SYSTEM

S/F steel conduit :

26 1.20 Supplying and fixing of following sizes of steel conduit along with theaccessories in surface/recess including painting in case of suface conduit, orcutting the wall and making good the same in case of recessed conduit asrequired :

a. 1.20.1 20 mmMeter 360

b. 1.20.2 25 mm Meter 340

27 1.17 Supplying and drawing following size of FRPVC insulated copper conductor,single core cable in the existing surface/ recessed steel/PVC conduit asrequired.

a 1.17.2 2 X 1.5 sq. mm.Meter 600

b 1.17.3 3 X 1.5 sq. mm.Meter 200

c 1.17.4 4 X 1.5 sq. mm. Meter 100

SUBHEAD-7 TOTAL

Sub Head 7

Before Issue


After Receipt





Rate (Rs.) in


EARTHING CONDUCTORS

Copper earth Plate Electrode

28 5.6 Earthing with Copper earth plate of size 600 x 600 mm x 3 mm thick includingall accessories and providing masonry enclosure with cover plate havinglocking arrangement and watering pipe of 2.7 meter long etc withcharcoal/coke and Salt as required to acheive the earth resistance less than 5Ohm for any kind of soil.

Set 19

SUBHEAD-8 TOTAL

TOTAL FOR SUB-HEAD 1 TO 8 FOR DSR

TOTAL

GRAND TOTAL

SUBHEAD-8

Before Issue


After Receipt



NON SCHEDULE ITEMS -ELECTRICAL ENGINEERING WORKS (SCHEDULE IV) Const. of SRE at Thanjavur (TN)

Sr.No. DESCRIPTION Unit Qty.Rate (Rs.)

in figuresRate (Rs.) in words Amount (Rs.)

Rates of only ISI marked conduits, cables, switches and socketoutlets have to be taken in the following items. Unless andotherwise specified, only such conduits, cables, switches andsocket outlets shall be used in the work.

SUBHEAD-1 POINT WIRING

COPPER WIRING IN STEEL CONDUIT

Point wiring in Steel conduit , with modular type switch:

NS-1 Supplying and fixing Lutron make digital ANEMOMETER modelno. 4201 (for measuring air flow of ductable ac.)

Nos 1

NS-2 Supplying and fixing digital thermo / hygrometer ( for measuringtemp. and humidity.)

Nos 1

NS-3 Supplying and fixing 3 Pin, 5 A ceiling rose on the existing junctionbox i.e. connection as required.

Nos 17

SUBHEAD-1 TOTAL

Name of Work: Construction of Radar Cum Antenna Building, DG Housing Shed, OPS Building at IAFS Thanjavur

Before Issue

Corrections (CR):Cuttings (CT):Insertions (I):OverWrittings (OW): BOQ-ELECTRICAT (NS) / 1

After Receipt


OverWrittings (OW):




SUBHEAD 2 CONDUITING AND WIRING FOR TELEPHONE

Note : Rates of only ISI marked conduits have to be taken in the followingitems. Unless and otherwise specified, only such conduits shall beused in the work.

S/F GI Boxes :

NS-4 Supplying and fixing GI Box of suitable size on surface or in recesscomplete with modular telephone jack, modular base & modularplate.

Each 12

NS-5 Supply and drawing following pair, 0.5 mm dia. FR PVC insulatedcopper conductor, unarmoured telephone cable in the existingsurface / recessed steel/ PVC conduit as required.

3 pair unarmoured telephone cable MTR 500

NS-6 Supplying and fixing of Following pair Telephone Tag Block in SSenclosure alongwith back mounting frame, Krone connectors etc.complete including termination etc.as required.

a. 20 Pair tag block Nos 7

b. 10 Pair tag block Nos 5

Before Issue


After Receipt


OverWrittings (OW):




NS-7 Supplying of following sizes of 0.5 mm dia FR PVC insulatedcopper conductor armoured jelly filled Telephone cable.

a. 10 Pair armoured cable ( For OPS to BADC BUILDING ) RM 3000

b. 20 Pair armoured telephone cable (For OPS Building to ATCTower)

RM 2000

NS-8 Laying and fixing of copper conductor armoured jelly filledtelephone cable of size not exceeding 20pair on surface asrequired.

RM 400

NS-9 Laying of copper conductor armoured jelly filled telephone cableof size not exceeding 20 pair in the existing RCC/ Hume/stoneware/ Metal pipe as required.

RM 100

NS-10 Laying of copper conductor armoured jelly filled telephone cableof size not exceeding 20 pair direct in ground includingexcavation, sand cushioning, protective covering and refilling thetrench etc. as required.

RM 4400

Before Issue


After Receipt


OverWrittings (OW):




NS-11 Supplying, installation, testing and commissioning of 4 line IN and12 line OUT telephone exchange as required or asdirected.(DIGITAL TYPE)

Nos 1

NS-12 Supplying of push button type telephone instrument with in builtcaller id and mike facility arrangement. Siemens / L&T / beetelmake/crompton.

Nos 12

NS-13 Supplying, laying, termination, testing and commissioning ofSYSTIMAX/DIGILINK make bearing product No. 5023 012AWXBK /and material IO 760002279/DIGILINK DFCA009GST12,single mode, 12 fibre, dual window,metallic tape, armoured Opticalfibre cable,Corning SMF and laying the same in already laid HDPEpipe as required and terminating the cable in BEL supplied LIUincluding testing through optical tester domain result at SRE siteas required (Note:the OF Cable required to be laid in six no. singlelengths. all the twelve ends (total 144 no. fibres) shall be teminatedin BEL supplied LIU. expect LIU, all the required material(installation and commissioning of Pigtail,splicing etc) and tools formaking the OF cable operational, shall be provided by theexecuting agency.affter connectrorisation,OTDR Test shall beperfomed by excuter. the LIU shall be provided by BEL duringcommissioning of SRE Radar after completion of work service).

RM 9000

SUBHEAD-2 TOTAL

Before Issue


After Receipt


OverWrittings (OW):




SUBHEAD 3 SUPPLY & INSTALLATION OF LIGHTING FIXTURES & FANS

Note : Rates of only ISI marked conduits, cables, switches and socketoutlets have been taken in the following relevant items. Unlessand otherwise specified, only such conduits, cables, switches andsocket outlets shall be used in the work.

ITC Air circulator fan :

NS-14 Installation, testing and commissioning of heavy duty air circulatorwall fan by providing suitable bolts & nuts / screws, making goodthe damages, making electrical connections, earthing, testing etc,as required. The electrical connections shall be made by providingsuitable size PVC insulated flexible copper wire from alreadyprovided ceiling roses as required.

Each 5

NS-15 Supplying the following Lighting fixtures including lamps/CeillingFan/heavy duty Exhaust fan/heavy duty Air Circulator wall fan atsite. Rate shall include all taxes and duties, transportation etc.complete.

a. Box type 1 x 36 watts TLD lamp Fluorescent Light fixtures as perPHILIPS TMC055 1XTLD36W EBT

Nos 67

b Mirror Optics 2 x 36 watts TLD lamp Fluorescent Light fixtures asper PHILIPS TBS- 518 2XTDL36W EBTMI

Nos 2

Before Issue


After Receipt


OverWrittings (OW):




c Box type 1 x 18 watts TLD lamp Fluorescent Light fixtures as perPHILIPS TMS- 520/118 HF

Nos 20

d Mirror Light 1 x 9 watts CFL Light as per PHILIPS - FMC 21/109. Nos 8

e Bulkhad fitting 1 x 9 watts CFL Light as per PHILIPS FXC-101 Nos 17

f Recessed mount 4 x 18 watts TLD lamp Fluorescent Light fixturesas per PHILIPS TBS- 088/418M4 X TLD18WIC C5

Nos 29

g 1 x 500 watts Halogen Light as per PHILIPS QVF- 135/5001XHALTDS500W

Nos 2

h Recesed mount 1x13 W CFL lamp light fixtures as per PHILIPSFBT-150 1XPLC/2P13WI 240 V

Nos 6

i Recesed mount down lighter suitable for installation in false ceilinghaving 1xGLS 100 W lamp with dimmer arrangement.

Nos 6

Before Issue


After Receipt


OverWrittings (OW):




j 48" dia (1200 mm sweep) double ball bearing Ceiling fan withElectronic fan regulator.

Nos 17

k 18" (450mm) dia heavy duty Exhaust fan with bird guardscreenand gravity louvres complete as required.

Nos 2

l 12" (300mm) dia heavy duty Exhaust fan with bird guardscreenand gravity louvres complete as required.

Nos 11

m 450 mm sweep, heavy duty Air Circulator wall fan with allaccessories and blades

Nos 5

n Supply of Die cast alluminium alloy housing aviation light suitablefor neon spiral lamp with built in step up transformer along withaccessories and lamp and fixing the same above the building byproviding 19 mm dia. Class B G.I. pipe i/c providing a suitableelectronic timer etc., making electrical connection and earthing asrequired (Make: BAJAJ: BJAOL1)

Nos 4

o Supply and fixing of automatic 2500 Watt electricity operated HandDryer in perfect position over tiles using required fixing materialetc. complete in all respects. (Make - EURONICS/ORCHIDS)

Nos 2

Before Issue


After Receipt


OverWrittings (OW):




p Supply, Installation , Testing and Commissioning of ElectricGeyser with copper tank, Heating Element - Tubular CopperSheathed, Mineral Filled, external temperature control, 25 Ltrcapacity alongwith safety devices such as Thermostat, thermal Cutoff, Fusible Plug, Built in Pressure, Relef valve. (Make- UshaLexus, venus or equivalent ISI mark as approved by Engineer-in-charge).

Nos 1

q Supply, Installation , Testing and Commissioning of Ding - DongBell/buzzer (not wireless type).

Nos 1

SUBHEAD-3 TOTAL

SUBHEAD 4 SPN DISTRIBUTION BOARDS

Note Rate of only ISI marked MCBs fuses have to be taken in thefollowing items. Unless and otherwise specified, only such MCB'sas mentioned in the List of approved materials shall be used in thework.

AMF PANEL

NS-16 Supply, installation, testing and commissioning of Indoor type, floormounting type, metal enclosed, free standing, dust and verminproof, microprocessor based, 125KVA DG AMF control panel withlogic devices for commercial & DG supply with 400A, 415Vincomer MCCB, one no. 250A, 415V out going MCCB and threenos. 100A 415V out going MCCB and as per details technicalspecifications complete as required and directed. (to be provided

in DG Shed Panel Room)

Set 1

Before Issue


After Receipt


OverWrittings (OW):




CHANGEOVER SWITCH

NS-17 Providing, fixing and termination of 400 amps, 4 P, 415V On Loadchange over switch in sheet steel enclosure (Enclousre sutaible

for termination of 3.5x300 Sqmm with suitable lugs and

glands) complete with connections, testing and commissioningetc., as reqd. (to be provided In SRE Radar cum Antenna bldg.)

Nos 1

NS-18 Providing , fixing and termination of 160 amps, 4 P, 415V On Load change over switch in sheet steel enclosure (Enclousre sutaible



Nos 2

NS-19 Providing , fixing and termination of 63, amps 4 P, 415V On Loadchange over switch in sheet steel enclosure (Enclousre sutaible



Nos 1

400A BUSBAR BOX

NS-20 Supplying ,fixing and termination of busbar chamber with 4 stripsbusbar of lenght 600 mm., made of aiuminium alloy or wrougthaluminium, suitable for 400A capacity, complete with allaccessories including connections, earthing the body etc. asreqired.(to be provided In SRE Radar cum Antenna bldg.)(Enclousre sutaible for termination of 3.5x300 Sqmm with

suitable lugs and glands)

Set 1

Before Issue


After Receipt


OverWrittings (OW):




SWITCH DISCONNECTOR FUSE UNITS (SDFU)

NS-21 Providing ,fixing and termination of 400A rating TPN switchdisconnector fuse unit with ISI marked HRC fuses in the suitablesize cubicle panel board (sutaible for termination of 3.5x300

Sqmm with suitable lugs and glands) having privision for cablegland at both the sides including drilling holes in cubicle panel,fixing cubicle panel board on the wall / column etcc. with suiatblesize fastener etc., as required.(to be provided In SRE Radar cumAntenna bldg.)

Nos 1

NS-22 Providing ,fixing and termination of 160 Amp rating TPN switchdisconnector fuse unit with ISI marked HRC fuses in the suitablesize cubicle panel board (sutaible for termination of 3.5x70

Sqmm with suitable lugs and glands) having privision for cablegland at both the sides including drilling holes in cubicle panel,fixing cubicle panel board on the wall / column etcc. with suiatblesize fastener etc., as required.(to be provided In SRE Radar cum

Antenna bldg.)

Nos 3

NS-23 Providing, fixing and termination of 63A rating TPN switchdisconnector fuse unit with ISI marked HRC fuses in the suitablesize cubicle panel board (sutaible for termination of 3.5x 50

Sqmm with suitable lugs and glands) having privision for cablegland at both the sides including drilling holes in cubicle panel,fixing cubicle panel board on the wall / column etcc. with suiatblesize fastener etc., as required.(to be provided In SRE Radar cum

Antenna bldg.)

Nos 1

Before Issue


After Receipt


OverWrittings (OW):




MAIN DISTRIBUTION BOARD (MDB)

NS-24 Supplying of Main Distribution Board ( MDB ) as per detailedtechnical specifications with 3 no. 400A HRC fuse with fuse base,1 no 400A, 415V, 3 pole, 50 KA MCCB with overload, shortcircuit& earth fault protection, 2nos. fuse 5A with CT ratio 400/5A (class-1) and outgoing 7 nos. 100A TPN MCCB , 2no. 200A TPN MCCBwith 600A TPN aluminium busbar see components as per singleline diagram and installation,testing and commissioning of thesame including providing necessary MS channels etc on floor/duct, coupling of the laid conduits/ cables, etc., complete asdirected.(to be provided In SRE Radar cum Antenna bldg.)

Nos 1

LIGHT DISTRIBUTION BOARD (LDB ) 12WAY TPN

NS-25 Supplying of Light Distribution Board ( LDB ) as per detailedtechnical specifications with 1no. 150A, 415V, 3 pole, 35KAMCCB and outgoing 12 nos. 32A DP MCB with 200A TPNaluminium busbar see components as per single line diagram andinstallation,testing and commissioning of the same complete asdirected. (to be provided In SRE Radar cum Antenna bldg.)

Set 1

Before Issue


After Receipt


OverWrittings (OW):




A/C DISTRIBUTION BOARD (ACDB ) 12WAY TPN

NS-26 Supplying of AC Distribution Board ( ACDB ) as per detailedtechnical specifications with 1no. 150A, 415V, 3 pole, 35 KAMCCB and outgoing 10 nos. 20A SPN MCB, 4 Nos 32 A TPNMCB with 200A TPN aluminium busbar see components as persingle line diagram and installation,testing and commissioning ofthe same complete as directed.(to be provided In SRE Radar

cum Antenna bldg.)

Set 1

LIGHT, A/C,10 KVA UPS DISTRIBUTION BOARD 12 WAY TPN

NS-27 Supplying of Light, AC, 10KVA UPS Distribution Board as perdetailed technical specifications with 1no. 150 A, 415V 3pole,35KA MCCB and outgoing 1nos. 32A TPN MCB, 11nos. 6/16/32ASPN MCB, with busbar see components as per single line diagramand installation,testing and commissioning of the same completeas directed.(to be provided for OPS bldg.)

Set 2

32A TPN MCB WITH ENCLOSURE

NS-28 Supplying of 32ATPN MCB in sheet steel enclosure and fixing thesame on surface or in recess complete with connections, testingand commissioning etc. as required.

Nos 7

32A DP MCB WITH ENCLOSURE

NS-29 Supplying of 32A DP MCB in sheet steel enclosure and fixing thesame on surface or in recess complete with connections, testingand commissioning etc. as required.

Nos 11

SUBHEAD-4 TOTAL

Before Issue


After Receipt


OverWrittings (OW):




SUBHEAD 5 CABLE WORK

NS-30 Supply of PVC insulated, PVC sheathed, armoured, Aluminium /Copper conductor (AYFY), L.T. cable of following sizes completeas per specifications.

a 1.1 KV 3.5 x 300 sq. mm AL Cable RM 300

b 1.1 KV 3.5 x 50 sq. mm AL Cable RM 250

c 1.1 KV 3.5 x 25 sq. mm AL Cable RM 40

d 1.1 KV 4 x 25sq. mm AL Cable RM 40

e 1.1 KV 4 x 16 sq. mm AL Cable RM 40

f 1.1 KV 4 x 10 sq. mm U/A copper Cable RM 40

Before Issue


After Receipt


OverWrittings (OW):




g 1.1 KV 4 x 10 sq. mm AL Cable RM 350

h 1.1 KV 4 x 6 sq. mm Cu Cable RM 100

i 1.1 KV 2 x 6 sq. mm AL Cable RM 100

j 1.1 KV 3.5 x 70 sq. mm Copper conductor Cable (Required fromGF to 5th Floor for 160 KVA UPS)

RM 100

NS-31 Fabricating and installing 300mm. Width * 62.5mm. depth*2mm.thick perforated M.S. cable trays including horizontal and verticlebends, reducers, tees, cross members and other accessories asrequired and duly suspended from the ceilling/ fixing on wall withM.S. suspenders/ Anchor fasteners etc. and i/c painting etc. asrequired.

RM 50

SUBHEAD-5 TOTAL

Before Issue


After Receipt


OverWrittings (OW):




Sub Head -6 Ductable & Split AC Units

NS-32 Supply, erection, testing and commissioning (through OEM or

their authorised dealer and installation report to be furnished) of High Wall Mount type Split AC units of 1.5 TR capacity withrotary compressor, aircooled condensing unit with cooling coil , fanmotor and indoor unit complete with filter section, cooling coil ofcopper tubes with aluminium fins, electricmotor, fans including 4metres of suction refrigerant pipes with insulation and 4 metres ofdischarge refrigerant grade copper pipes with insulation andcovered with heavy duty pvc flexiable pipe of suitable sizeincluding all accessories and controls etc., including minor civilworks, PCC/MS structural supports for AC units all as specifiedand/or directed etc., complete. (The External unit will be mountedon proper grouted angle iron frame of size 50 mm. x 50 mm. x 5mm. duly painted and covered with galvanised sheet cover.) Note:- Total 05 yrs. of warrenty is required on compressors of split

AC from OEM.(Five star rating)

No 3.00

Before Issue


After Receipt


OverWrittings (OW):





their authorised dealer) of High Wall Mount type Split AC units of2.2 TR capacity with scroll compressor, aircooled condensing unitwith cooling coil , fan motor and indoor unit complete with filtersection, cooling coil of copper tubes with aluminium fins,electricmotor, fans including 4 metres of suction refrigerant pipeswith insulation and 4 metres of discharge refrigerant grade copperpipes including all accessories and controls etc., including minorcivil works, PCC/MS structural supports for AC units all asspecified and/or directed etc., complete. (The External unit will bemounted on proper grouted angle iron frame of size 50 mm. x 50mm. x 5 mm. duly painted.) To be installed in OPS building. Note :-

Total 05 yrs. of warrenty is required on compressors of split

AC from OEM (Five star ratting).

No 9.00

NS-34 Supply, erection, testing and commissioning (through OEM or theirauthorised dealer) of High Wall Mounting type Split AC units of 3.5TR (Three Phase) capacity with twin rotary compressor, aircooled condensing unit with cooling coil , fan motor and indoor unitcomplete with filtersection,cooling coil of copper tubes withaluminium fins, electricmotor, fans including 4 metres of suctionrefrigerant pipes with insulation and 4 metres of dischargerefrigerant grade copper pipes with insulation and covered withheavy duty pvc flexiable pipe of suitable size including allaccessories and controls etc.,including minor civil works, PCC/MSstructural supports for AC units all as specified and/or directedetc.,complete.(The External unit will be mounted on proper groutedangle iron frame of size 50 mm. x 50 mm. x 5 mm. duly paintedand covered with galvanised sheet cover.) Note :- Total 05 yrs. of

warrenty is required on compressors of split AC from OEM

(Five star rating).

No 3.00

Before Issue


After Receipt


OverWrittings (OW):




NS-35 Supply, erection, testing and commissioning of refrigerant gradecopper piping between indoor and out door units of suitable sizefor discharge line without insulation and covered with heavy dutypvc flexiable pipe of suitable size including all fittings,accessoriesetc.,.for 1.5 TR, 2.2 TR and 3.5 TR capacity High wall mount typeAC units complete all as specified and/or directed.

MTR 65.00

Note: Only the extra length of refrigerant pipe used over and abovethe 4 mtrs length supplied with the AC unit will be measured andpaid under this item.

NS-36 Supply, erection, testing and commissioning of refrigerant gradecopper piping between indoor and out door units of suitable sizefor suction line with insulation and covered with heavy duty pvcflexiable pipe of suitable size including all fittings,accessories etc,for 1.5 TR ,2.2 TR and 3.5 TR capacity High wall mount type ACunits complete all as specified and/or directed.

Note: Only the extra length of refrigerant pipe used over and abovethe 4 mtrs length supplied with the AC unit will be measured andpaid under this item.

MTR 65.00

NS-37 Supply, erection, testing and commissioning of PVC heavy dutyrigid pipe / Reinforced Braded pipe of 25mm dia for codensatewater drain from the split AC units and ductable AC unit withnecessary fittings etc., all as specified and / or directedetc.,complete. (The outlet pipe to be fitted upto nearest rain waterpit).

MTR 200.00

Before Issue


After Receipt


OverWrittings (OW):





their authorised dealer) of Ductable AC units of 8.5 TR capacity,Specially degined for air flow of 3000 CFM (Minimum) designed atambient temp. not less than 45 degree C with single scroll

compressor unit with cooling coil, blower, fan, motor and indoorunit complete with filter section,cooling coil of copper tubes withaluminium fins, electricmotor, fans including liquid line valve, drier,VI pads, R22 refrigerant, lockable GI (20 gauge) mouthdamper/Louver, double canvass connection between indoor unitand duct including control panel/unit accessories, controls,minorcivil works, PCC/MS frame/supports for mounting AC units,control cables, earthing, PVC rigid pipe for condensate water drainwith necessary fittings all as specified and/or directedetc.,complete. (The External unit will be mounted on propergrouted angle iron frame of size 50 mm. x 50 mm. x 5 mm. dulypainted and covered with galvanised sheet cover.) NOTE:- At the

equipment inlet temperature is to be maintained between 10

to 12 degree Centigrate.

EACH 2.00

NS-39 Supply, erection, testing and commissioning of refrigerant gradecopper piping between indoor and out door units of suitable sizefor suction line with insulation and covered with heavy duty pvcflexiable pipe of suitable size including all fittings,accessories etc.,for 8.5TR capacity ductable AC units complete all as specified and/ or directed.

MTR 35.00

NS-40 Supply, erection, testing and commissioning of refrigerant gradecopper piping between indoor and out door units of suitable sizefor discharge line without insulation and covered with heavy dutypvc flexiable pipe of suitable size including all fittings,accessoriesetc, for 8.5 TR capacity ductable AC units complete all as specifiedand / or directed.

MTR 35.00

Before Issue


After Receipt


OverWrittings (OW):




NS-41 Supply, fabrication and installation of rectangular air ducts madeof GI sheet of 22 Guage thick and zinc coating of not less than120g/m2 in accordance with approved drawings including necessaryhangers, supports, gaskets and flanges etc., all as specifiedand/or directed etc.,complete.

SQM 30.00

NS-42 Providing thermal insulation for GI sheet metal rectangular airducts with 9 mm thick vidoflex/Armaflex all as specified and/ordirected etc., complete.

SQM 30.00

NS-43 Providing the round collar duct of 10 inches dia with flexiblecanvass as required for connecting the supply air duct to theEquipment's inlet port including flanges,nuts,bolts etc., all asspecified and/or directed etc.,complete.

NO's 4.00

NS-44 Supply and installation of GI butterfly damper/Louver of 10 inchesdia forthroting/by passing the flow of air into the equipmentincluding gaskets and flanges etc., all as specified and/or directedetc.,complete.

NO's 4.00

NS-45 Supply and laying of 1100 V grade aluminium conductor, PVCinsulated, PVC sheathed, armoured,cable for power cabling and660 V grade, single core/multicore PVC insulated, copperconductor, wires for control wiring and earthing between the indoorunits and outdoor units of ductable AC units including the conduits,laying the same in cable duct/wall/floor, all as specified and / ordirected etc.,complete.

LOT 1.00

Before Issue


After Receipt


OverWrittings (OW):




NS-46 Air curtain: Supply, installation, testing and commissioning of aircurtain of 1000mm length suitable for 2.4 meter hight door for Airlock of equipment room in 5th floor of tower all as specified and/ordirected etc., complete. Make Almonard /Crompton Greaves.(Veriable speed-12-16 metere/sec)

NO's 5.00

NS 47 Supply, installation, testing and commissioning of 5 KVA stabilizer for split AC indoor units

Nos 12

NS-48 De-Humidifier: Supply, erection, testing and commissioning(through OEM or their authorised dealer) of desiccantdehumidifier of 175 CFM capacity with humidistat Controllersuitable for mounting in floor/wall/ceiling including MS mountingframe/supports including upto 12 mtrs length of flexible inlet andoutlet pipes all asspecified and/ordirected etc.,complete. Make:Bry-Air Model: FFB-300.

NO's 1.00

SUBHEAD-6 TOTAL

Before Issue


After Receipt


OverWrittings (OW):




Sub Head 7 FIRE ALARM SYSTEM

NS-49 Supplying, Installation, Testing & Commissioning of multi Zone (8zone) Microprocessor based Modular expandable Main Fire

Alarm Control Panel with window type annunciation to indicatefire and fault, LED lamps for visual indication, audio-alarm unit,push buttons for acknowledge, test, reset, complete with powersupply of 24 V DC, 7 AH from 230 V AC and backed up by amaintenance free battery system (SMF battery shall be Hitachi

make or equal). Including testing and commissioning of completefire alarm installation by specialized agency Make (Agni

(signature brand)/ Ravel).

No. 2

NS-50 Supply, erection, testing and commissioning of multi zone(8 zone)Repeater panel with visual flasher and audio alarm and compatiblewith the main fire alarm control panel complete as specified and orrequired .

No. 1

NS-51 Supplying and fixing of the following :

a Supply, erection, testing and commissioning ofPhotoelectric(Optical) type smoke detector with base all asspecified and or required etc., complete.

No. 56

b Supply, erection, testing and commissioning of heat detector withbase all as specified and or required etc.,complete.

No. 9

Before Issue


After Receipt


OverWrittings (OW):




c Supply, erection, testing and commissioning ceiling/wall mountedElectronic hooters all as specified and or required etc., complete.

No. 10

d Supply, erection, testing and commissioning of Manual call pointsall as specified and or required etc., complete.

No. 10

e Supply, erection, testing and commissioning of response indicatorall as specified and or required etc., complete.

No. 65

f Supply, Installation, testing and commissioning of linear heatsensing cable complete with all accessories in the cable trench forsurveillance of fire alarm system.

mtr 50

g Supply, Installation, testing and commissioning of Monitor modulecomplete with all accessories to be connected with linear heatsensing cable and compaitable with main fire alarm panel forsurveillance of fire alarm system.

nos 1

h Supply, Installation, testing and commissioning of AC Probe Unitcomplete with all accessories to be provided along with the Airconditioning duct and compaitable with main fire alarm panel forsurveillance of fire alarm system.

Lot 1

Before Issue


After Receipt


OverWrittings (OW):




NS-52 Supply of 18 core, 2.5 sq.mm. Ar. Copper conductor repeatercable from MFAP to repeater panel.

MTR 150

NS-53 Laying of 18 core, 2.5 sq.mm. Ar. Copper conductor repeatercable from MFAP to repeater panel in ground in additional tierincluding excavation, sand cushioning, protective covering andrefilling the trench etc. as required.

MTR 125

NS-54 Laying and fixing of one number PVC insulated and PVC sheathedof 18 core, 2.5 sq.mm. Ar. Copper conductor repeater cable from

MFAP to repeater panel on surface as required.

MTR 25

SUBHEAD-7 TOTAL

SUBHEAD-8 EARTHING CONDUCTORS

NS-55 Supply of 25mm*5mm size copper flats strip ( electrolite grade)

and laying/fixing the same below ground/on the wall/column oninsulator at every 1m interval with suitable brass screw/bolt andnut as required at site, terminating the ends with brass bolts andnuts etc. complete. The copper strips will be laid in a single lenght.Brazing will be done at joints if reqd. at site The rate shall beinclusive of making, testing point for earth pit as directed byEngineer-in-charge.

Mtrs. 600

Before Issue


After Receipt


OverWrittings (OW):




NS-56 Providing & Fixing 6 SWG GI Wire for loop Earthing alongwith LTcables as required.

Mtrs. 500

NS-57 Chemical earthing with desired number of copper earth electrodes(electrolite grade) complete with all accessories and filling

materials. As specified in tender document. The earth result has tobe less than 0.5 ohm for any kind of soil.

Set 4

SUBHEAD-8 TOTAL

SUBHEAD-9 Isolation Transformer (125KVA)

NS-58 Supply, installation, testing and commissioning of 125 KVA, 415 V,3 phase, indoor type, oil cooled Isolation transformer, rugged inconstraction, free standing floor mounting type and in generalconforming to IS: 2026. The Isolation transformer shall comply withthe technical specifications provided in the tender.

Set 1

SUBHEAD-9 TOTAL

Before Issue


After Receipt


OverWrittings (OW):




SUBHEAD-

10

Servo stabiliser (125KVA)

NS-59 Supply, installation, testing and commissioning of oil cooled 125KVA, AC, 3 phase & nutral servo stabiliser having input 360-500V, p.f. 0.8, o/p - 415 V +-1%, efficiency 97%, frequency 48-52 Hztotally inclosed type with bypass switch for insulation and ingeneral conforming to IS: 9815 .The Servo stabiliser shall complywith the technical specifications provided in the tender.

Set 1

SUBHEAD-10 TOTAL

SUBHEAD-

11

D.G. Set (125KVA)

NS-60 Supply, installation, testing and commissioning (through OEM only) of 125KVA capacity, water cooled, 1500 rpm silent DG Set directly coupled with alternator of 415 V, 3 phase, 50 Hz 4 wire generation system complete with sound proof accoustion encloser, fuel tank battery with leads, AVM pads, exhaust piping as required as per CPCB Norms. NOTES: 1). DG SET to be tested for 10% over load for one hour in 24 hours loading duration as per the recommendation of OEM and as stipulated in the tender document, artificial loading and fuel charges for DG testing shall be arranged and bone by the contractor. 2). Height of exhaust pipe be maintained as per CPCB recommendation. 3) neccessory provision in the alternator side of DG set to be made for connecting 3.5X300 sqmm Ar AL cable.

Set 1

SUBHEAD-11 TOTAL

Before Issue


After Receipt


OverWrittings (OW):




SUB HEAD-

12

EXTERNAL LIGHTING

NS-61 Supply and installation of 9.0 metre long steel tubular pole (type410 SP-31) complete with junction box of suitable size (weatherproof) fabricated from 3 mm sheet steel and powder coatedsuitable for terminating one number of 4C x 10 Sq mm Alconductor Ar cable & with one number of 10 A MCB on each pole,complete as per specifications and all accessories and wiring etcas required. Painting the pole with two coats of red oxide and threecoats of aluminium paint.

Nos 8

a) Number of arms = 1

b) Overhang Length = 1.2 metre

c) Angle of tilt = 15 degree

NS-62 Supply, Installation, Testing and Commissioning of 1X150WPHILIPS CAT NO. SRP 202/150 complete with lamp, gear boxand all accesseries etc. as required.

Nos 8

STEEL ENCLOSURE

NS-63 Supplying of 16A TPN MCB in sheet steel enclosure and fixing thesame on surface or in recess complete with connections, testingand commissioning etc. as required.

Nos 1

Before Issue


After Receipt


OverWrittings (OW):




NS-64 Supplying of 4x35 Sq mm P.V.C. insulated copper conductor,unarmoured cable of 1.1 KV grade complete as per specification.

Mtrs. 15

SUBHEAD-12 TOTAL

SUBHEAD-

13

LIFT & Misc

NS-65 Design, Engineering, manufacturing, supplying, installation, testingand commissioning (Through OEM only) of 10 passangerslift(Machine Room Less) in the existing shaft complete as perdetailed technical specifications and as required / directed by theEngineer in charge.

No 1

NS-66 Supply, Installation, Testing and Commissioning of Runway

status light indication system with operability on 24 V DC supply, audio alarm, in sheet steel enclosure with required accessoriesi/c termination of 20 core, Armoured jelly filled telephone Copperconductor cable complete along with one sheet steel consisting ofbuzzer, push button, 4 nos. LED light indicator (Red, Yellow,Amber, green)and another sheet steel consisting of 4 nos. LEDlight indicator (Red, Yellow, Amber, green) all as specified anddirected.

SET 1

Before Issue


After Receipt


OverWrittings (OW):




NS-67 Supply, Installation, Testing and Commissioning of Horizontalmonoblock centrifugal pumping set with mechanical seal, CI valveand bronze impeller connected to a TEFC induction motor of 1 HPfor 240 volts, 1 phase,50 cycles, AC supply with starter, vibrationpads etc complete in all respect as directed by Engineer in Charge.

Nos 1

NS-68 Supply and fixing of 40 mm dia PVC flexible pipe MTR 56

NS-69 Supply and fixing of 25 mm dia metal flexible pipe MTR 45.4

NS-70 Supply and fixing of 25 mm dia PVC flexible pipe MTR 12

SUBHEAD-13 TOTAL

GRAND TOTAL FOR SUB-HEAD 1 TO 13

Before Issue


After Receipt


OverWrittings (OW):