Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Ruko Kalimas Blok D No. 19
Jl. Chairil Anwar, Margahayu, Bekasi
Indonesia
Phone: +62-811-8861-588
Fax: +62-21-8834-3949
Email: [email protected]
PT. ProFluid
COMPANY PROFILE
8. Nozzle and Receptacle
9. Filtration
10. Others (Stock, Piping, ESDV)
LNG/CNG Product :
PT. PROFLUID is NOT a SUPPLIER but a PARTNER, as a partner, our concerns are to fulfill our customer requirements and
to provide the best economic solution. With basic as well known brand Distributor, PROFLUID is able to provide proud
achievements.
PT PROFLUID is a company specialized in Natural Gas Industry. We provide a wide range of LNG/CNG Product application
for Mother Station, Daughter Station, NGV/CNG Station and others application. PT PROFLUID Supports the customer with our
specialized engineering team for a new system or reverse engineering.
Company Brief
Market Segment
Drilling Services Petrochemicals Oil and Gas
1. Gas Compressor
2. Gas Dryer
3. Gas Scrubber/Coalescer
4. LNG/CNG Storage
5. LNG/CNG Dispenser
6. Tubing and Fittings
7. Fluid Connectors
CNG/LNG
Features
1. Non-lubricated cylinders, pistons, and valves for
clean discharge gas (5ppm or less).
2. Balanced reciprocating design for low vibration
and low noise.
3. Compressor layout designed for easy service.
4. Gauge panel display of system status,
temperatures, and pressures.
5. Electrical control (PLC/MCC panel with alarm
status indicators for unattended operation).
6. Self-lubricating Teflin and/or PEEK composite
piston rings and rod packings.
7. High efficiency gas-to-air heat exchanger for
inter-stage and discharge gas cooling.
8. Optional vibration isolators available which
reduce transmission of compressor vibration to
the ground
1. Clean CNG Compressors
All images are courtesy of IMW Clean Energy Compression
IMW’S CleanCNG compressors are the most versatile natural gas compressors on the market today. Fully integrated CNG
fueling systems are designed, manuufactured, pacakaged, and tested by IMW’s in house engineering and production teams,
using satndard models and cutom equipment designs.
Benefits
1. Reliable product designs that have been tried and tested
2. Modular design to allow configurability on site, and redeployment possibilities for temporary sites
3. Wide range of models to suit a variety of site requirements
4. Oil-free compression technology in each unit
5. Simplified ordering process from list of pre-engineered compressor models
6. Quicker delivery of standard equipment models
7. Lower prices on standard products
Features
1. Remote Access via integrated web server
2. Dual skid-mounted dispense pumps
3. Layout designed for easy maintenance
4. Dedicated offload pump to provide
simultaneous offloading & dispense
operations.
5. Reserve power & gas connections to easily
hook up an optional generator powered by the
methane vapors in the top of the LNG storage
tank
6. Standard station designed for (1) 18,000gal
(68,000 liter) capacity storage tank (Horizontal
& Vertical orientation available)
7. Additional 18,000gal (68,000 liter) capacity
storage tank option available (Total capacity of
36,000 gal (136,000 liter) capacity)
8. Safety measures include fire & methane
detectors, fire alarm control panel, alarm
logging and battery backup system
9. Fully automated LNG dispenser with internal
card reader
10. Worldwide support through IMW offices and
affiliates
LNG Station
All images are courtesy of IMW Clean Energy Compression
IMW’S EnhancedLNG full retail LNG station is designed to provide a fast fueling experience to customers that require either
LNG or LCNG for their vehicles, resulting in clean and cheaper fuel for consumers. This standard LNG fueling station is a
modular design, giving your fleet drivers a convenient, easy-to-use, fast-filling (up to 40 GPM) experience that reduces
operating costs and helps the environment. Our equipment uses proven proprietary control logic to reduce loss of prime and
improve reliability.
Benefits
1. Primary & back-up pump set for uninterrupted fueling capability
2. Fast fueling of up to 40 GPM with an average fill time of under 5
minutes
3. Capital and operating cost reduction
4. Environmentally aware
5. Very Reliable - 70% of all US LNG stations use CleanLCNG
equipment
6. Standard site layout is designed for LCNG expansion
7. LNG Dispensers are Weights & Measures Certified providing a level
of accuracy within +/- 1.5%
Ordering and Performance Data : Dicharge side
Model Order no.
Volumetric fow Nominal
pressure in
bar
Nominal
temp. in °C
Nominal
pipe size 2)
1. Pre-filter
(included)
2. Pre-filter
(included)
After-filter
(included) 1)in sm3/h 3) In MMSCFD
HDK-CNG 250-250 H250/250NG0-
G400J
250 0,2 250 35 ½° GH7/250VPL2
5NXOA/CNG
GH7/250ZHT
NXOA/CNG
GH7/250ZP/
CNG
HDK-CNG 750-250 H750/250NG0-
G400J
750 0,64 250 35 1° GH11/250VPL
25NXOA/
CNG
GH11/250ZH
TNXOA/
CNG
GH11/250ZP/
CNG
HDK-CNG 1200-250 H1200/250NG0-
G400J
1200 1 250 35 1° GH11/250VPL
25NXOA/
CNG
GH11/250ZH
TNXOA/
CNG
GH11/250ZP/
CNG
HDK-CNG 2000-250 H2000/250NG0-
G400J
2000 1,7 250 35 1° GH11/250VPL
25NXOA/
CNG
GH11/250ZH
TNXOA/
CNG
GH11/250ZP/
CNG
2. Gas Dryer
Suction Side :
Capital cost saving drying solution on suction side of the
compressor up to 50 bar
High effective drying by mol sieve adsorbent with low co-
adsorption of odorizing agents
Approved for fluid group 1 gases
acc. to PED
Optional ATEX compliance for zone 2 or zone 1
All images are courtesy of Parker Distributor Indonesia
Dicharge Side :
Leakage minimized drying solution up to 350 bar
Ideal for pulsed streams by piston- loaded bed
Ready for container installation
High effective drying by mol sieve adsorbent with low co
-adsorption of odorizing agents
Approved for fluid group 1/PED
Optional ATEX compliance for zone 2 or zone 1
Media type C or Q
Available in grades 6,8 or 10
Air Flow Inside to Outside
Media type D
Available in grades 6,8 or 10
Air Flow Inside to Outside
Media type E
Air Flow Inside to Outside
Media type 7CVP
Air Flow Inside to Outside
Solid particles and liquid droplets entrained within the gas flow enter into filter vessel, where the gas then passes into the
coalescer filter elements. An integral pre-filter element design captures solid particles prior to the coalescing section of the
element.
The gas next passes through a borosilicate glass fibre media, where coalescence of the entrained liquid droplets takes place
through impaction on the microfine filter media fibres. The droplets attached to the fibres agglomerate together and due to their
now increased mass, drain through and pass out of the filter element to the vessels drain section for removal.
Removal Of Liquids and Particulate
3. Gas Scrubber/Coalescer
ASME Design Filter Vessel
Coalescingelements
All images are courtesy of Parker Distributor Indonesia
Coalescing elements are specially designed for the removal of liquid contaminants from gaseous flows. These media types flow
from the inside of the element to the outside. Coalesced liquid (water and oil) collects in the bowl where it is drained, while clean
air or gas exits the housing through the outlet port. Particulate contaminants are captured and held in the media.
Standard Gas Coalescing
ASME, SECT VIII : rules for construction of pressure vessel
API 12J : spesification for oil and gas separator
CNG Cascade Storage
A cascade storage system is a high pressure gas cylinder system which is used for the refilling of smaller compressed gas
cylinders or air cylinders. Each of the large cylinders is filled by a compressor, but the cascade system allows small cylinders to
be filled without a compressor. In addition, a cascade system is useful as a reservoir to allow a low-capacity compressor to meet
the demand of filling several small cylinders in succession.
In general rupture discs are installed inline between the compressor and the storage units to burst if the maximum safety pressure
is exceeded.
LNG Storage
A liquefied natural gas storage tank or LNG storage tank is a specialized type of storage tank used for the storage of Liquefied
Natural Gas. LNG storage tanks can be found in ground, above ground or in LNG carriers. The common characteristic of LNG
Storage tanks is the ability to store LNG at the very low temperature of -162 °C (-260 °F). LNG storage tanks have double
containers, where the inner contains LNG and the outer container contains insulation materials. The most common tank type is
the full containment tank. Tanks vary greatly in size, depending on usage.
In LNG storage tanks if LNG vapours are not released, the pressure and temperature within the tank will continue to rise. LNG is
a cryogen, and is kept in its liquid state at very low temperatures. The temperature within the tank will remain constant if the
pressure is kept constant by allowing the boil off gas to escape from the tank. This is known as auto-refrigeration.
4. LNG/CNG Storage
5. LNG/CNG Dispenser
All images are courtesy of Parker Distributor Indonesia
Parker is an expert in natural gas. A leader in the design and manufacture of products and systems that filter, regulate, control,
and measure compressed natural gas (CNG).
FEATURES
Gas Banks One, two or three banks of up to 4,250
psig supply
Hoses Single or dual delivery hoses with LCD
display and keypad per hose
Pressure Gauges Side mounted analog dial, 6,000 psig, UL
404 listed, liquid filled, one per side
Vehicle Fill Pressure Relief 4,500 psig vented via a 1 inch pipe to top
mounted exhaust
Electronic Gas
Dispenser
Control System
Large character (25 mm height) LCD
display of:
Total sales
Unit prices
Total units
Ethernet and Modbus interfaces to
standard CRIND systems
Interface and
Connections
Nozzle: NGV2 or Parker 3-way ball valve
Gas Supply: ½ inch pipe inlet connection
Communication with external payment
and fleet card systems such as Petro
Vend®/FIT500™, FUELMASTER®
2500, Verifone, and Comdata
PERFORMANCE
Flow Coefficient (at reference
conditions)
Cv = 0.48 with OPW CT1000 nozzle
Cv = 0.62 with Parker 3-way ball valve
Maximum Flow Rate
25 kg/min (55 lb/hr) with OPW nozzle
33 kg/min (70 lb/hr) with Parker 3-way
ball valve
Minimum Flow Rate 2 kg/min (4.5 lb/min)
Reliability (at reference
conditions)
50,000 fill cycles between preventative
maintenance operations
CERTIFICATIONS
CSA ANSI/NGV 4.1
NTEP Weights/measures with NTEP certified mass meters and pay stations
Installation Lifting Hooks For safe movement and installation of the dispenser
A-LOK® Fittings
Industry standard design for all instrumentation grade tubing
Silver coated threads to reduce galling
Back ferrule is treated with Suparcase™ technology to provide a strong mechanical grip
on the tube
Industry double ferrule design for system specifications
Instrumentation Pipe Fittings
Manufactured from 316 stainless steel for superior corrosion resistance
Available with NPT and ISO thread configurations
All exposed threads protected to prevent damage
Ball Valves - B Series
2-way, 3-way diverting or spring loaded 3-way selector designs
Wide temperature application range -65°F (18°C) to +450°F (232°C)
Rated for up to 6000 psi (413.7 bar)
Widest variety of seats, seals and port connections
Connections include CPl™, ! -LOK®, male and female NPT, UltraSeal™ and VacuSeal™
Hi-Pro Ball Valves - HBV Series
Suitable for the most demanding applications in the oil, gas and process control industries
integral compression ends available, eliminating taper threads and thread sealants
Two piece barstock design reduces body leakage paths
Complies with ANSI/ASME B16.34 requirements where applicable
NACE MR-01-75/ISO 15156 compliant materials available
Fire safe option
6. Tubing & Fittings
All images are courtesy of Parker Distributor Indonesia
Profluid will be certified company to Crimp Parflex CNG Hose in Indonesia
Features:
Twin line assemblies available to reduce installation time, eliminated tangling and reduce part number complexity
Electrically conductive core tube
Perforated polyurethane cover
Sizes up to 1
Part # Nom I.D Max O.D.
Max.
Working
Pressure
Min.
Bend Radius Weight Permanent Crimp
Fitting
Inch mm Inch mm PSI MPa Inch mm Lbs/FT Kg/m
5CNG-3 3/16 5 0.43 11 5.000 34.5 1.5 38 0.05 0.07 56
5CNG-4 1/4 6 0.62 16 5.000 34.5 2 51 0.11 0.16 58
5CNG-6 3/8 10 0.65 16 5.000 34.5 3 76 0.09 0.13 55
5CNG-8 1/2 13 0.9 23 5.000 34.5 4 102 0.21 0.31 58
5CNG-12 3/4 19 1.15 29 5.000 34.5 7.5 191 0.24 0.36 58H
5CNG-16 1 25 1.59 40 5.000 34.5 10 254 0.36 0.53 58H
7. Fluid Connectors
A. Check Valves
C Series CO Series CB Series
B. Parflex CNG Hoses
All images are courtesy of Parker Distributor Indonesia
Technical Data
8. Weh Nozzle & Breakaway
The WEH® TK16H2 Fuelling Nozzle makes refuelling with compressed Hydrogen (CGH2) even more easy for the operator.
The TK16H2 is very light in weight and therefore easy to operate.
The actuation lever is located on the integrated swivel joint making it easy to rotate into the optimal actuating position. The
actuation lever needs less effort to actuate the nozzle.
The WEH® TK16H2 has a coding spesifically for pressure range and gas type and thus the coding will not allow connection to
natural gas vehicles or other pressure range.
Features
1. Compatible with The WEH® TK16H2 receptacle profile
2. WEH® EASY-TURN 360° swivel joint for actuation
lever
3. Easy operation
4. Exyremely high flow rate => short filling times
5. Recirculation of the vented gas
6. Plastic thermal protection
7. WEH® Jaw locking mechanism
8. High-grade materials
9. Coding for pressure range / gas type
All images are courtesy of WEH CNG Refuelling
Characteristic Basic version
Nominal bore DN 8 mm
Pressure range PN = 110 bar (1,600 psi) | PS = 140 bar | PT = 210 bar
PN = 250 bar (3,600 psi) | PS = 350 bar | PT = 525 bar
PN = 350 bar (5,000 psi) | PS = 450 bar | PT = 675 bar
Temperature range -40°C up to +85°C (-40°F up to + 185°F)
Material Corrosion resistant
Sealing material Hydrogen compatible
Design With plastic thermal protection and gas recirculation
Weight Approx. 1.75 kg (3.86 lbs.)
Registration PED97/23/EC. CE0036
SAE J2600.2002
Technical Data
Receptacle Nozzle Breakaway
9. Filtration
All images are courtesy of Parker Distributor Indonesia
PRS FFC-113 Major Model for CNG Station
Finite’s J-Series is designed to filter contaminants such as rust and pipe scale, compressor lube oil, and water from compressed
gases. These filters are often used in high pressure compressed natural gas (CNG) systems, not only as inter-stage filters in the
multiple stage compression of the gas, but also in the storage and delivery of the gas to CNG powered vehicles.
Finite’s varied media choices remove up to 99.995% of
both solid and liquid aerosols, and contaminants as small
as 0.2 microns in size. Additionally, cartridges are
available with either silica gel or molecular sieve, these
desiccants adsorb water vapor, drying the high pressure
air or gas. An activated carbon media is also available
which removes oil vapor. This stage of filtration is often
used as the final filter before the storage of high pressure
breathing air used by scuba divers, firefighters, and others
that utilize portable breathing devices.
Spesification
Model
Number
Port
Size
Max.
Pressure
Max. Temp.
for each
Element
Type
Materials of Construction
Seals Sump
capacity
Dimesions
Weight
Head Internals Bowl Lenght Width
J2SD SAE-8* 5000 PSIG
(345 bar)
350°F
(C,3P,100W
S) 175°F (A)
Ductile
Cast
Iron
Aluminium Carbon
Steel
Fluoro-
carbon
2.0 oz.
(60ml)
9.2 lbs.
(4.2 kgs.)
8.1”
(205.7 mm)
3.7”
(94.0
mm)
J2SL SAE-8* 5000 PSIG
(345 bar)
350°F
(C,3P,100W
S) 175°F (A)
Ductile
Cast
Iron
Aluminium Carbon
Steel
Fluoro-
carbon
7.4 oz.
(220ml)
13.1 lbs.
(5.9 kgs.)
12.0”
(304.8 mm)
3.7”
(94. mm)
J4SF/J4NF SAE-16/
1” NPT
5000 PSIG
(345 bar)
350°F
(C,3P,100W
S) 175°F (A)
130°F (10J)
Nodular
Cast
Iron
Aluminium
Nodular
Cast
Iron
Fluoro-
carbon
7.1 oz.
(210ml)
22.1 lbs.
(10.0 kgs.)
13.5”
(342.9 mm)
4.6”
(116.8
mm)
J6SH/J6NH SAE-24/
1½” NPT
5000 PSIG
(345 bar)
350°F
(C,3P,100W
S) 175°F (A)
130°F (10J)
Nodular
Cast
Iron
Aluminium Carbon
Steel
Fluoro-
carbon
21.5 oz.
(636ml)
52.3 lbs.
(23.7 kgs.)
21.1”
(535.9 mm)
6.5”
(165.1
mm)
10. Others (Stock, Piping, ESDV)
Stock
Piping
ESDV
Valves and Receptacles
1. High-pressure CNG valves
2. Low-pressure CNG valves
3. Check valves
4. Receptacles
Fuel Conveyance
5. Low-pressure CNG hose
6. High-pressure CNG hose
7. Seal-LokTM O-Ring
Face Seal fittings
Filtration
8. High-pressure filters
9. Low-pressure filters
Parker Product on Online Station
Parker Product on Vehicle
All images are courtesy of Parker Distributor Indonesia
Experience
Scrubber Project Kalija
SPBG CNG Pulogadung (Gas Scrubber, Fittings, & Tubing)
Experience
SPBG Ancol
Experience
Pembuatan dan Pemasangan Scrubber dan Dryer di SPBG Pemuda, Pasar Minggu, dan Daan Mogot
PT. ProFluid