Pasolink

Password : Change Password? (no:0 / yes:1):0

1. Setting 2. Maintenance 3. Monitoring 99. Exit

Select function No. :1

Setting 1. Bit rate (16x2MB) 2. AIS RCVD alarm/status (status) 3. AIS SEND alarm/status (status) 4. TX/RX frequency (8ch) 5. TX power ctrl (0dB) 6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN) 7. BER alarm threshold (10-6) 8. Frame ID (2) 9. DSC1 (232) 10. DSC2 (232) 11. DEM invert (off) 12. Alarm table 13. Next items 00. Menu 99. Exit

Select item No. :4

4. TX/RX frequency(8ch)

TX/RX frequency (0ch - 255ch) :8


Select item No. :5

5. TX power ctrl(0dB)

MTPC TX power (-10 to 0dB) :-1

Setting 1. Bit rate (16x2MB) 2. AIS RCVD alarm/status (status) 3. AIS SEND alarm/status (status) 4. TX/RX frequency (8ch) 5. TX power ctrl (-1dB) 6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN) 7. BER alarm threshold (10-6) 8. Frame ID (2) 9. DSC1 (232) 10. DSC2 (232) 11. DEM invert (off) 12. Alarm table 13. Next items 00. Menu 99. Exit

Select item No. :5

5. TX power ctrl(-1dB)

MTPC TX power (-10 to 0dB) :-0


Select item No. :6

6. Main channel usage 1-16 ( 1:used 2:used 3:used 4:used 5:used 6:used 7:used 8:used

9:not used 10:not used 11:not used 12:not used 13:not used 14:not used 15:not used 16:not used )

Select channel No. :9

Channel 9 (used:0 / not used:1) :0

Setting 1. Bit rate (16x2MB) 2. AIS RCVD alarm/status (status) 3. AIS SEND alarm/status (status) 4. TX/RX frequency (8ch) 5. TX power ctrl (0dB) 6. Main channel usage 1-16 (used:UUUU UUUU UNNN NNNN) 7. BER alarm threshold (10-6) 8. Frame ID (2) 9. DSC1 (232) 10. DSC2 (232) 11. DEM invert (off) 12. Alarm table 13. Next items 00. Menu 99. Exit

Select item No. :6

6. Main channel usage 1-16 ( 1:used 2:used 3:used 4:used 5:used 6:used 7:used 8:used 9:used 10:not used 11:not used 12:not used 13:not used 14:not used 15:not used 16:not used )

Select channel No. :9

Channel 9 (used:0 / not used:1) :1


Select item No. :12

12.Alarm table 1/2

Form C1 Form C2 Form C3 Form C4 1.INPUT LOSS --- --- --- --- 2.AIS RCVD --- --- --- --- 3.AIS SEND --- --- --- --- 4.OUTPUT LOSS --- OUT --- --- 5.TX CLK LOSS OUT --- --- --- 6.FSYNC ALM --- OUT --- --- 7.HIGH BER ALM --- --- --- --- 8.LOW BER ALM --- --- --- --- 9.BER ALM --- OUT OUT ---

Press any key to continue ...

12.Alarm table 2/2

Form C1 Form C2 Form C3 Form C4 10.MOD ALM OUT --- --- --- 11.DEM ALM --- OUT --- --- 12.OPR ALM OUT OUT --- --- 13.TX PWR ALM OUT --- --- --- 14.RX LEV ALM --- OUT --- --- 15.APC1 ALM OUT OUT --- --- 16.APC2 ALM --- OUT --- --- 17.IF INPUT ALM OUT --- --- --- 18.MAINT MASK MASK MASK OUT

Select item No. (1-18 , 0:no change) :0


Select item No. :00

1. Setting

2. Maintenance 3. Monitoring 99. Exit


Monitoring 1. Monitoring voltage 2. Monitoring voltage(continuous mode) 3. Alarm/Status 4. Inventory 00. Menu 99. Exit

Select item No. :1

1. Monitoring voltage TX power :*.** RX level :*.**


Select item No. :33. Monitoring of alarm/status 1/2 IDU INPUT LOSS 1-16 (alarm:-*-- ---- ---- ----) CHANNEL USAGE ERROR 1-16 (alarm:---- ---- ---- ----) AIS RCVD 1-16 (alarm:*-** **** ---- ----) AIS SEND 1-16 (alarm:**** **** ---- ----) OUTPUT LOSS 1-16 (alarm:---- ---- ---- ----) TX CLK LOSS (alarm:-) FSYNC ALM (alarm:*) HIGH BER ALM (alarm:*) LOW BER ALM (alarm:*) BER ALM (alarm:*)

Press any key to continue ...

3. Monitoring of alarm/status 2/2 MOD ALM (alarm:-) DEM ALM (alarm:*) OPR ALM (alarm:*)

ODU TX PWR ALM (alarm:-) RX LEV ALM (alarm:-) APC1 ALM (alarm:-)

APC2 ALM (alarm:-) IF INPUT ALM (alarm:-)

MUTE (off) TX/RX FREQ CH (0ch)

Press any key


Select item No. :4

4. Inventory 1/2 IDU Serial number 87732 Manufactured date APR/2006 Software version(ROM/RAM) (1.20/2.49) Bit rate 2/4/8/16x2MB Option module

Press any key to continue...

4.Inventory 2/2 ODU

The abnormalities in communication

Press any key


Select item No. :00




Select item No. :00



EXIT

Documents

Pasolink