PART 2 FINANCIAL BID SCHEDULE (BILL) OF QUANTITIES BID USIC... · schedule (bill) of quantities (item rate tender) abstract of cost schedule description total quoted amount in figures

PART 2

FINANCIAL BID

SCHEDULE (BILL) OF QUANTITIES

PART 2 SCHEDULE (BILL) OF QUANTITIES

(ITEM RATE TENDER) ABSTRACT OF COST

SCHEDULE DESCRIPTION TOTAL QUOTED AMOUNT IN FIGURES ( Rs,)

A CIVIL WORK

B INTERNAL ELECTRIFICATION WORK

C EXTERNAL ELECTRIFICATION WORK

D HVAC WORK

E LIFT WORK F E.O.T. CRANE WORK

TOTAL OF ALL SCHEDULES (A) TO (F)

UNCONDITIONAL REBATE

TOTAL OF ALL SCHEDULES (A) TO (F) AFTER APPLYING REBATE (RUPEES) (i) In figures (ii) In words.

i) SIGNATURE OF AUTHORIZED SIGNATORY OF TENDERER ii) NAME OF SIGNATORY iii) NAME AND SEAL OF TENDERER iv) DATE & PLACE

S.No. Sub Brief DescriptionHead

CIVIL WORKS1 i CARRIAGE OF MATERIALS

2 ii EARTH WORK

3 iii CONCRETE WORK

4 iv REINFORCED CEMENT CONCRETE5 v BRICK WORK6 vi MARBLE WORK7 vii WOOD WORK AND PVC WORK8 viii STEEL WORK9 ix FLOORING

10 x FINISHING WORK11 xi ROAD WORK12 xii SANITARY INSTALLATIONS13 xiii WATER SUPPLY14 xiv DRAINAGE15 xv ALUMINIUM WORK16 xvi WATER PROOFING17 xvii MISCELLANEOUS WORK

Sub totalTOTAL

SUMMARY FOR SCHEDULE OF QUANTITIES FOR CIVIL WORK

Amount in figures ( Rs. )

S.No. Description

AmountIn Figures (Rs.) In Words (Rs.) In Figures (Rs.)

11.1 Carriage of materials by mechanical transport

including loading, unloading and stacking (1 kmaway from site)

1.1.2 Earth 375.57 cum.

TOTAL2 SUB HEAD No.2 Earth work

2.6 Earth work in excavation by mechanical means(Hydraulic excavator )/ manual means over areas(exceeding 30cm in depth. 1.5m in width as wellas 10 sum on plan) including disposal ofexcavated earth, lead upto 50m and lift upto1.5m, disposed earth to be levelled and neatlydressed.

2.6.1 All kinds of soil 1190.35 cum.

2.25 Filling available excavated earth (excluding rock)in trenches, plinth, sides of foundations etc. inlayers not exceeding 20cm in depth,consolidating each deposited layer by rammingand watering, lead up to 50 m and lift upto 1.5 m.

814.78 cum.

2.26 Extra for every additional lift of 1.5 m or partthereof in excavation /banking excavated orstacked materials.

2.26.1 All kinds of soil. 238.07 cum.2.27 Supplying and filling in plinth with Jamuna sand

under floors, including watering, ramming,consolidating and dressing complete.

325.88 cum.

Qty Unit Quoted

Unit Rate

ABSTRACT OF COST FOR CONSTRUCTION OF USIC BUILDING AT ALLAHABAD (U.P)DSR-2012 Items/ NS

Items

SUB HEAD NO. 1 : Carriage of materials

1

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

2.34 Supplying chemical emulsion in sealedcontainers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrateof 20%

165.60 litres

2.35 Diluting and injecting chemical emulsion forPOST-CONSTRUCTIONAL anti-termitetreatment (excluding the cost of chemicalemulsion) :

2.35.2 Along the external wall below concrete ormasonry apron using chemical emulsion @ 2.25litres per linear metre including drilling andplugging holes etc.

2.35.2.1 With chloro pyriphos/lindane EC 20%, with 1%concentration

73.60 sqm.

TOTAL3 SUB HEAD No.3 CONCRETE WORK

4.1 Providing and laying in position cement concreteof specified grade excluding the cost of centringand shuttering - All work upto plinth level :

4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size)

140.95 cum.

4.2 Providing and laying cement concrete in retainingwalls, return walls, walls (any thickness) includingattached pilasters, columns, piers, abutments,pillars, posts, struts, buttresses, string or lacingcourses, parapets, coping, bed blocks, anchorblocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost ofcentering, shuttering and finishing :

2

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

4.2.8 1:5:10 (1 cement : 5 coarse sand : 10 gradedstone aggregate 40 mm nominal size)

14.19 cum.

4.10 Providing and laying damp-proof course 40mmthick with cement concrete 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 12.5mmnominal size).

60.13 sqm.

4.13 Applying a coat of residual petroleum bitumen ofgrade of VG-10 of approved quality using 1.7kgper square metre on damp proof course aftercleaning the surface with brushes and finally witha piece of cloth lightly soaked in kerosene oil.

60.13 sqm.

4.17 Making plinth protection 50 mm thick of cementconcrete 1:3:6 (1 cement:3 coarse sand : 6graded stone aggregate 20 mm nominal size)over 75mm thick bed of dry brick ballast 40 mmnominal size, well rammed and consolidated andgrouted with fine sand, including finishing the topsmooth.

48.45 sqm.

TOTAL4

5.9 Centring and shuttering including strutting,propping etc. and removal of form for :

5.9.1 Foundations, footings, bases of columns, etc. formass concrete.

261.40 sqm.

5.9.2 Walls (any thickness) including attachedpilasters, buttresses, plinth and string coursesetc.

581.68 sqm.

5.9.3 Suspended floors, roofs, landings, balconies andaccess platform.

1901.39 sqm.

5.9.4 Shelves (Cast in situ) 6.42 sqm.

SUB-HEAD No. : 4 : REINFORCED CEMENT CONCRETE

3

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

5.9.5 Lintel, Beams, Plinth beams, girders, bressumersand cantilevers

2132.85 sqm.

5.9.6 Columns, Pillars, Piers, Abutments, Posts andStruts.

812.51 sqm.

5.9.7 Stairs, (excluding landings) except spiral-staircases.

34.16 sqm.

5.11 Extra for additional height in centering, shutteringwhere ever required with adequate bracing,propping etc., including cost of de-shuttering anddecentering at all levels, over a height of 3.5 m,for every additional height of 1 metre or partthereof (Plan area to be measured).

5.11.1 Suspended floors, roofs, landing, beams andbalconies (Plan area to be measured)

251.28 sqm.

5.22 Steel reinforcement for R.C.C. work includingstraightening, cutting, bending, placing in positionand binding all complete upto plinth level.

5.22.6 Thermo- Mechanically Treated bars 47253.35 kgs.

5.22A Steel reinforcement for R.C.C. work includingstraightening, cutting, bending, placing in positionand binding all complete above plinth level.

5.22.6 Thermo- Mechanically Treated bars 88242.40 kgs.5.34 Extra for providing richer mixes at all floor

level.Note:- Excess/less cement over thespecified cement content used is payable/recoverable separately.

5.34.1 Providing M-30 grade concrete instead of M-25grade BMC/RMC. (Note:- Cement contentconsidered in M-30 is @ 340 kg/cum).

95.97 cum.

4

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

5.35 Add for using extra cement in the items of designmix over and above the specified cement contenttherein.

352.00 quintal

5.37 Providing and laying in position ready mixedconcrete manufactured in fully automatic batchingplant and transported to site of work in transitmixer for a lead upto 10kms having continuousagitated mixer, manufactured as per mix designof specified grade for reinforced cement concretework including pumping of R.M.C. from transitmixer to site of laying , excluding the cost ofcentering, shuttering finishing and reinforcementincluding cost of admixtures in recommendedproportions as per IS : 9103 to accelerate/ retardsetting of concrete, improve workability withoutimpairing strength and durability as per directionof the Engineer - in - charge. M-25 gradeReinforced cement concrete by using 330Kg ofcement per cum of concrete.All works upto plinthlevel. (Note :- Cement content considered in this item is@ 330 kg/cum. Excess/less cement used as perdesign mix is payable/recoverable separately).

5.37.1 All work upto plinth level. 365.92 cum.5.37.2 All works above plinth level upto floor V level 562.87 cum.

TOTAL5

6.1 Brick work with common burnt clay F.P.S.(nonmodular) bricks of class designation 75 infoundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 69.15 cum.

SUB - HEAD No. :5 : B R I C K W O R K

5

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

6.4 Brick work with common burnt clay F.P.S.(nonmodular)F.P.S. bricks of class designation 75insuperstructure above plinth level upto floor Vlevel in all shapes and sizes in:

6.4.2 Cement Mortar 1:6 (1 cement : 6 coarse sand). 421.21 cum.

6.13 Half Brick masonary with common burnt clayF.P.S.(non modular)F.P.S. bricks of classdesignation 75 insuperstructure above plinth levelupto floor V level.

6.13.2 cement mortar 1:4 (1 cement : 4 coarse sand) 211.96 sqm.

6.15 Extra for additional cost of centering for archesexceeding 6m span including all shuttering,bolting, wedging and removal (Area of the soffit to be measured).

211.96 sqm.

TOTAL6

8.2 Providing and fixing 18mm thick gang saw cutmirror polished (premoulded and prepolished)machine cut for kitchen platforms, vanitycounters, window sills, facias and similarlocations of required size of approved shade,colour and texture laid over 20mm thick basecement mortar 1:4(1 cement : 4 coarse sand)with joints treated with white cement, mixed withmatching pigment, epoxy touch ups, includingrubbing, curing moulding and polishing to edge togive high gloss finish etc. complete at all levels.

8.2.1 Raj Nagar Plain white marble/ Udaipur greenmarble/ Zebrablack marble

SUB - HEAD No. : 6 : M A R B L E W O R K

6

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

8.2.1.2 Area of slab over 0.50sqm. 8.00 sqm.

8.5 Extra for providing of required size and shape forwash basins/ Kitchen sink in kitchen platform,vanity counters and similar location in marble/granite/ stone work including necessary holes forpillar taps etc. including rubbing and polishing ofcut edges etc. complete

10.00 each

TOTAL7

9.20 Providing and fixing ISI marked flush doorshutters conforming to IS : 2202 (Part I)decorative type, core of block board constructionwith frame of 1st class hard wood and wellmatched teak 3 ply veneering with vertical grainsor cross bands and face veneers on both faces ofshutters.

9.20.1 35 mm thick including ISI marked Stainless Steelbutt hinges with necessary screws

42.99 sqm.

9.27 Providing and fixing wire gauge shutters usinggalvanized M.S. wire gauge of average width ofaperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestorywindows with hinges and necessary screws:

9.27.1.2 With ISI marked stainless steel butt hinges ofrequired size.

9.27.1.2.1. Second Class Teak Wood 42.99 sqm.

SUB - HEAD No. : 7 : W O O D A N D P. V. C. W O R K

7

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

9.48 Providing and fixing M.S. grills of required patternin frames of windows etc. with M.S. flats, squareor round bars etc. Including primary coat withapproved steel primer all complete.

9.48.2 Fixed to openings/ wooden frames with rawlplugs screws etc.

2012.04 kg.

9.53 Providing 40X5mm flat iron hold fasts 40 cm longincluding fixing to frame with 10mm diameterbolts, nuts and wooden plugs and embeddings incement concrete block 30X10X15cm 1:3:6 mix (1cement: 3 coarse sand : 6 graded stoneaggregate 20mm nominal size)

324.30 each

9.76 Providing and fixing bright finished brass 100 mmmortice latch and lock with 6 levers and a pair oflever handles of approved quality with neccessaryscrews etc complete.

28.75 each

9.97 Providing and fixing aluminium tower bolts ISImarked anodised (anodic coating not less thangrade AC 10 as per IS : 1868 ) transparent ordyed to required colour or shade with necessaryscrews etc. complete :

9.97.2 250x10mm 37.95 each9.97.4 150x10mm 37.95 each

9.98 Providing and fixing aluminium pull bolt lockanodised ISI marked (anodic coating not lessthan grade AC 10 as per IS : 1868) transparentor dyed to required colour and shade withnecessary screws bolts, nut and washers etc.complete.

4.60 each

8

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

9.100 Providing and fixing aluminium handles ISImarked anodised (anodic coating not less thangrade AC 10 as per IS : 1868) transparent ordyed to required colour or shade with necessaryscrews etc. complete :

9.100.1 125 mm 96.60 each9.101 Providing and fixing aluminium hanging floor door

stopper ISI marked anodised (anodic coating notless than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shadewith necessary screws etc. complete.

9.101.2 Twin Rubber Stopper 34.50 each9.121 Providing and fixing of Fibre Glass Reinforced

plastic (FRP) Door Frames of three legged ofcross-section 90mm x 45mm having single rebateof 32mm x 15mm to receive shutter of 30mmthickness .The laminate doorframe moulded withfire resistant grade unsaturated polyester resinand chopped mat .Doorframe laminate shall be2mm thick and shall be filled with suitablewooden block in all the three legs. The frameshall be covered with fibreglass from all sides.MS stay shall be provided at the bottom to steadythe frame.

45.54 m.

9.122 Providing and fixing to existing door frames.

9

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

9.122.1 30 mm thick Glass Fibre Reinforced Plastic(FRP) panelled door shutter of required colourand approved brand and manufacture, made withfire - retardant grade unsaturated polyester resin,moulded to 3 mm thick FRP laminate for forminghollow rails and styles, with wooden frame andsuitable blocks of seasoned wood inside atrequired places for fixing of fittings, castmonolithically with 5 thick FRP laminate forpanels and confirming to IS: 14856 - 2000including fixing to frames.

14.49 sqm.

9.102 P/F Aluminium casement stays ISI markedanodised ( anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed torequired colour and shade with necessary screwsetc. complete

48.30 each

TOTAL8

10.6 Supplying and fixing rolling shutters of approvedmake, made of required size M.S. laths,interlocked together through their entire lengthand jointed together at the end by end locks,mounted on specially designed pipe shaft withbrackets, side guides and arrangements forinside and outside locking with push and pulloperation complete, including the cost ofproviding and fixing necessary 27.5 cm long wiresprings manufactured from high tensile steel wireof adequate strength conforming to IS: 4454 -part 1 and M.S. top cover of required thicknessfor rolling shutters.

SUB - HEAD No. :8 : S T E E L W O R K

10

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover 20.50 sqm.

10.14 Providing and fixing pressed steel doorframesconforming to IS: 4351,manufactured fromcommercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if requiredangle threshold ofmild steel angle of section 50x25 mm, or base ties of1.60 mm, pressed mild steel welded or rigidly fixedtogether by mechanical means, including M.S. pressedbutt hinges 2.5 mm thick with mortar guards, lockstrikeplate and shock absorbers as specified andapplying a coat of approved steel primer after pre-treatment of thesurface as directed by Engineerin-charge:

10.14.2 Profile C

10.14.2.1 Fixing with adjustable lugs with split end tail to eachjamb

119.37 metre

10.18 Providing and fixing circular/ Hexagonal cast iron orM.S. sheet box for ceiling fan clamp of internal dia140mm, 73mm height, top lid of 1.5mm thick M.S.sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/ M.S. sheetbox by means of 3.3mm dia. round headed screws,one lock at the corners. Clamp shall be made of 12mmdia M.S. bar bent to shape as per standard drawing.

5.00 each

10.25 Steel work welded in built up sections/ framed workincluding cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer usingstructural steel etc. as required.

11

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

10.25.2 In gratings, frames, guard bar, ladder, railings,brackets, gates and similar works.

23.11 kg.

10.26 Providing and fixing hand rail of approved size bywelding etc. to steel ladder railing and similarworks, balcony railing and staircase railingincluding applying a priming coat of approvedsteel primer.

10.26.1 M.S. tube 33.66 kg.

TOTAL9

11.3 Cement concrete flooring 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate) finishedwith a floating coat of neat cement includingcement slurry, but excluding the cost of nosing ofsteps etc. complete.

11.3.1 40mm thick with 20mm nominal size stoneaggregate.

57.98 sqm.

11.5 62 mm thick cement concrete flooring withconcrete hardener topping,under layer 50 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size) and top layer12mm thick cement hardener consisting of mix1:2 (1 cement hardenermix : 2 graded stone aggregate, 6mm nominalsize) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement oras per manufacture’sspecifications. This includes cost of cementslurry, but excluding the cost of nosing of stepsetc. complete.

288.45 sqm.

SUB-HEAD No. :9 : F L O O R I N G

12

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

11.19 Chequered terrazo tiles 22 mm thick with gradedmarble chips of size up to 6 mm in floors jointedwith neat cement slurry mixed with pigment tomatch the shade of the tiles including rubbing andpolishing complete on 20 mm thick bed of cementmortar 1:4 (1 cement :4 coarse sand) :

11.19.2 Medium shade using 50% white cement, 50%ordinary cement.

12.68 sqm.

11.23 Marble stone flooring with 18 mm thick marblestone, as per sample of marble approved byEngineer-in-charge, over 20 mm (average)thickbase of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with grey cementslurry, including rubbing and polishing completewith :

11.23.5 Udaipur green marble 127.03 sqm.

11.26 Kota stone slab flooring over 20 mm (average)thick base laid over and jointed with grey cementslurry mixed with pigment to match the shade ofthe slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4coarse sand) :

11.26.1 25mm thick 10.08 sqm.

13

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

11.36 Providing and fixing Ist quality ceramic glazedwall tiles conforming to IS : 15622 (thickness tobe specified by the manufacture ) of approvedmake in all colours, shades except burgundy,bottle green, black of any size as approved byEngineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar1:3 (1 cement : 3 coarse sand) and jointing withgrey cement slurry @ 3.3kg per sum includingpointing in white cement mixed with pigment ofmatching shade complete.

166.77 sqm.

11.40 Providing and laying rectified Glazed Ceramicfloor tiles 300x300 mm or more (thickness to bespecified by the manufacturer) of 1st qualityconforming to IS : 15622 of approved make in allcolours, shades, except White, Ivory, Grey, FumeRed Brown, laid on 20 mm thick Cement Mortar1:4 (1 Cement : 4 Coarse sand) including pointingthe joints with white cement and matchingpigments etc., complete.

49.36 sqm.

11.41 Providing and laying polished vitrified floor tiles indifferent sizes (thickness to be specified by themanufacturer) with water absorption's less than0.08% and conforming to IS : 15622 of approvedmake in all colours and shades, laid on 20mmthick cement mortar 1:4 (1 cement : 4 coarsesand) including grouting the joints with whitecement and matching pigments etc., complete.

11.41.2 Size of Tile 600x600 mm 966.51 sqm.

TOTAL

14

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

Non Scheduled Items NS-1 P/F 600X100X10mm vitrified tiles on vertical

surfaces as on skirtings, dados, risers of stepsetc. laid over a bed of 12mm thick cement mortar1:3 ( 1 cement : 3 coarse sand) set and jointed inwhite cement slurry pointed in white or colouredcement match

202.30 Rmt

TOTAL

1013.1 12 mm cement plaster of mix :13.1.2 1:6 (1 cement: 6 fine sand) 1154.21 sqm.13.2 15 mm cement plaster on the rough side of single

or half brick wall of mix :13.2.2 1:6 (1 cement: 6 fine sand) 1731.32 sqm.

13.16 6mm Cement plaster of mix 1:3(1cement: 3 fine sand)

1489.33 sqm.

13.37 White washing with lime to give an even shade13.37.1 New work ( three or more coats) 1489.33 sqm.13.41 Distempering with oil bound washable distemper

of approved brand and manufacture to give aneven shade

13.41.1 new work( Two or more coats) over and includingwater thinnable priming coat with cement primer

3174.08 sqm.

13.46 Finishing walls with Acrylic Smooth exterior paintof required shade :

13.46.1 New work (Two or more coat applied @ 1.67ltr/10 sqm over and including priming coat ofexterior primer applied @ 2.20 kg/ 10 sqm)

1350.00 sqm.

13.50 Applying priming cost

SUB-HEAD No. : 10 : F I N I S H I N G

15

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

13.50.1 With ready mixed pink or grey primer of approvedbrand and manufacture on woodwork ( hard andsoft wood)

100.85 sqm.

13.62 Painting with synthetic enamel paint of approvedbrand and manufacture of required colour to givean even shade

13.62.1 Two or more coats on new works over an undercoat of suitable shade with ordinary paint ofapproved brand and manufacture

19.54 sqm.

13.68 French spirit polishing :

13.68.1 Two or more coats on new works including a coatof wood filler

100.85 sqm.

TOTAL11

16.1 Preparation and consolidation of sub grade withpower road roller of 8 to 12 tonne capacity afterexcavating earth to an average of 22.5 cm. depth,dressing to camber and consolidating with roadroller including making good the undulations etc.and re-rolling the sub grade and disposal ofsurplus earth lead upto 50 metres.

60.00 Sqm

16.3 Supplying and stacking at site.16.3.1 90 mm to 45 mm size stone aggregate. 13.50 Cum

16.3.3 53 mm to 22.4 mm size stone aggregate. 13.50 Cum

SUB-HEAD No. : 11 : ROAD WORK

16

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

16.4 Laying , spreading and compacting stoneaggregate of specified sizes to WBMspecifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10tonne in stages to proper grade and camber,applying and brooming requisite type ofscreening / binding material to fill up intersticesof coarse aggregate watering and compacting tothe required density .

18.00 Cum

16.33 2.5 cm premix carpet surfacing with 2.25 cumand 1.12 cum of stone chippings of 13.2mm and11.2mm size respectively per 100 sum. and 52kg. and 56 kg. of hot bitumen per cum of stonechippings of 13.2 mm and 11.2 mm sizerespectively including a tack coat with hot straightrun bitumen including consolidation with roadroller of 6 to 9 tonne capacity etc. complete.(tack coat to be paid for separately) :

16.33.3 With Refinery Modified Bitumen CRMB 55conforming toIRC: SP: 53

40.00 sqm

16.42 Cement concrete 1:2:4 (1 cement:2 ocarase sand: 4 graded stone aggregate 40mm nominal size)in pavements, laid to required slope and camberin panels as required including consolidationfinishing and tamping complete.

3.00 cum

17

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

16.41 Providing and laying seal coat over preparedsurface of road with bitumen heated in bitumenboiler fitted with the spray set spraying using 98kg of bitumen of grade VG - 10 and blindingsurface with 0.90 cum of stone aggregate of 6.7mm size (Passing 11.2 mm sieve and retained on2.36 mm sieve) per 100 sqm of road surface,including rolling and finishing with power roadroller all complete.

40.00 sqm

16.69 Providing and laying at or near ground levelfactory made kerb stone of M-25 grade cement inposition to the required line, level and curvaturejointed with cement mortar 1:3 (1 cement : 3coarse sand ) including making joints with orwithout grooves (thickness of joints except atsharp curve shall not to more than 5mm)including making drainage opening whereverrequired complete etc. as per direction ofEngineer-in-charge ( length of finished kerbedging shall be measured for payment ). (PrecastC.C. kerb stone shall be approved by Engineer-in-charge).

5.00 cum

16.78 Construction of granular sub-base by providingclose graded Material conforming tospecifications, mixing in a mechanical mix plant atOMC, carriage of mixed material by tippers towork site, for all leads & lifts, spreading in uniformlayers of specified thickness with motor grader onprepared surface and compacting with vibratorypower roller to achieve the desired density,complete as per specifications anddirections of Engineer-in-Charge.

18

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

16.78.1 With material conforming to Grade-I (size range75 mm to 0.075 mm) having CBR Value-30.

8.00 cumTOTAL

1217.3 Providing and fixing white vitreous china pedestal

type water closet (European type) with seat andlid, 10 litre low level white vitreous china flushingcistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflowarrangement with specials of standard make andmosquito proof coupling of approved municipaldesign complete including painting of fittings andbrackets, cutting and making good the walls andfloors wherever required :

17.3.1 W.C. pan with ISI marked white solid plastic seatand lid.

7.00 Each

17.7 Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps,32 mmC.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting andmaking good the walls wherever require :

17.7.4 White Vitreous China Flat back wash basin size550x400 mm with single 15 mm C.P. brass pillartap.

9.00 each

17.7.3 White Vitreous China Wash basin size 550x400mm with a pair of 15 mm C.P. brass pillar taps

9.00 each

SUB-HEAD No. : 12 : SANITARY INSTALLATIONS

19

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

17.24 Providing and fixing white vitreous chinasquatting plate urinal withintegral rim longitudinal flush pipe.

6.00 each

17.31 Providing and fixing 600x450 mm beveled edgemirror of superior glass (of approved quality)complete with 6 mm thick hard board groundfixed to wooden cleats with C.P. brass screwsand washers complete.

9.00 each

17.34 Providing and fixing toilet paper holder :

17.34.1 C.P. brass 7.00 each

17.35 Providing and fixing soil, waste and vent pipes.

17.35.1 100 mm dia.

17.35.1.2 Centrifugally cast (spun) iron socket & spigot(S&S) pipe as per IS: 3989.

20.00 mtr

17.35.2 75 mm diameter :

17.35.2.2 Centrifugally cast (spun) iron socketed pipe asper IS: 3989.

15.00 mtr

17.37 Providing and fixing M.S. holder-bat clamps ofapproved design to Sand Cast iron/cast iron(spun) pipe embedded in and including cementconcrete blocks 10x10x10cm of 1:2:4 mix (1cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size) including cost ofcutting holes and making good the walls etc. :

17.37.1 For 100 mm dia. 10.00 each

17.37.2 For 75 mm dia. 12.00 each

20

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

17.38 Providing and fixing bend of required degree withaccess door, insertion rubber washer 3 mm thick,bolts & nuts complete. (IS 3989)

17.38.1.2 100 mm dia Centrifugally Cast (spun) Iron S&S. 3.00 Each


17.39 Providing and fixing plain bend of requireddegree. (IS 3989)



17.41 Providing and fixing double equal door Junctionof required degree with access door, insertionrubber washer 3 mm thick, bolts & nuts complete.(IS 3989)

17.41.1.2 100x100x100x100 mm Sand Cast Iron S&S. 3.00 Each

17.43 Providing and fixing single equal junction of required degree with access door, insertionrubber washer 3 mm thick, bolts & nuts complete.(IS 3989)

17.43.1.2 100x100x100 mm Centrifugally Cast (spun) IronS&S.

15.00 Each

17.44 Providing and fixing single equal plain junction ofrequired degree. (IS 3989)


6.00 Each


4.00 Each

21

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

17.46 Providing and fixing double unequal plain junctionof required degree complete. (IS 3989)

17.46.1.2 100x100x75x75 mm Sand Cast Iron S&S. 1.00 EACH

17.48 Providing and fixing single unequal plain junctionof required degree. (IS 3989)


10.00 Each

17.56 Providing and fixing terminal guard. (IS 3989)



17.58 Providing lead joints to sand cast iron/centrifugally cast (spun) pipes of diameter.

17.58.1 100 mm 20.00 Each

17.58.2 75 mm 15.00 Each

17.58.3 50 mm 15.00 Each

17.59 Providing and fixing MS stays and clamps forsand cast iron/ centrifugally cast (spun) pipes ofdiameter.

17.59.1 For 100 mm dia pipe 3.00 Each

17.59.2 For 75 mm dia pipe 2.00 Each

17.65 Painting sand cast iron/ centrifugally cast (spun)soil, waste, vent pipes and fittings with paint ofany colour such as chocolate grey, or buff etc.over a coat of primer (of approved quality) fornew work.

17.65.1 100 mm diameter pipe 20.00 Metre

22

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items


17.70 Providing and fixing PTMT Bottle Trap for Washbasin and sink.

17.70.1 Bottle trap 31mm single piece moulded withheight of 270 mm, effective length of tail pipe 260mm from the centre of the waste coupling, 77 mmbreadth with 25 mm minimum water seal,weighing not less than 260 gms

9.00 Each

TOTALNon Scheduled Items

NS-1 Providing & fixing C.P. hand spray with levercontrol (health faucet) and flexible hose 1 m longconnection with wall hook for hand spraycomplete in all respects. (Angle valve to beprovide under item no.14 & measure with thatitem.)

7.00 each

Providing and fixing PTMT liquid soap container109mm wide, 125mm high and 112mm distancefrom wall of standard shape with bracket of thesame materials with snap fittings of approvedquality and colour. weighing not less than 105gms.

6.00 Each17.71

23

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-2 Providing & fixing C.P. 450 mm long copperconnecting pipe and brass nuts and washerscomplete including cutting and making good thewalls wherever required

2.00 each

NS-3 Providing & fixing fully automatic "NO TOUCH"satin finish stainless steel wall mounted handdrier suitable to operate on 220 volts, singlephase 50 hz, A.C. power supply, ( rated power2500W, 9000 rpm automatic infrared sensingdevice, approximate blowing volume 270 cum/hr,drying time <10 sec. or as per Manufacturer'sspecifications.

6.00 each

NS-4 Providing & fixing C.P. brass Soap Dish , fixed towall including cutting and making good the wallswherever required

6.00 each

NS-5 Providing & fixing storage type electric hot waterheater made out of heavy gauge steel jacketfinished with rust proof baked-on glossy whiteenamel paint, inside glass lined heavy gaugecopper tank, 25 mm thick polyurethane foaminsulation, thermostatically controlled immersionheater with pilot neon lamp, replaceablemagnesium anode bar, suitable for 8.0 barmaximum working pressure, cold water inlet andhot water outlet pipe, suitable length of electricalcable and 15 amp 3 pin plug top, complete in allrespect including testing etc.(Horizontal/Vertical)

NS-5.1 15 ltr Capacity. 2.00 eachNS-5.2 25 ltr Capacity. 2.00 each

TOTAL13 SUB-HEAD No. : 13 : WATER SUPPLY

24

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

18.10 Providing and fixing G.I. Pipes complete with G.I.Fittings and clamps, including cutting and makinggood the walls etc. Internal work- Exposed on wall

18.10.1 15 mm dia. Nominal bore 25.00 Metre





18.12 Providing and fixing GI pipes complete with GIfittings including trenching and refilling etc.(External work)




18.21 Providing and fixing uplasticised PVC connectionpipe with brass unions :

18.21.1 30 cm length

18.21.1.1 15 mm nominal bore 15.00 Each

25

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

18.32 Constructing masonry Chamber 30x30x50cm,inside with 75 class designation brick work incement mortar 1:4 (1 cement : 4 coarse sand) forstop cock, with C.I surface box100mmx100mmx75mm (inside) with hinged coverfixed in cement conc slab 1:2:4mix (1 cement : 2coarse sand : 4 graded stone aggregate 20mmnominal size) necessary excavation foundationconcrete 1:5:10 (1 cement : 5 fine sand :10graded stone aggregate 40mm nominal size)and inside plastering with cement mortar 1:3 (1cement :3 coarse sand) 12mm thick finishedwith a floating coat of neat cement complete asper standard design.

18.32.1 With common burnt clay F.P.S.(non modular)bricks ofclass designation 7.5

2.00 each

18.33 Constructing masonry Chamber 60x60x75cm, insidewith 75 class designation brick work in cement mortar1:4 (1 cement : 4 coarse sand) for sluice valve, with C.Isurface box 100mm. top diameter, 160 mm bottomdiameter and 180 mm deep (inside) with chained lidand RCC top slab 1:2:4mix (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)necessary excavation foundation concrete 1:5:10 (1cement : 5 fine sand : 10graded stone aggregate40mm nominal size) and inside plastering with cementmortat 1:3 ( 1cement :3 coarse sand) 12mm thickfinished with a floating coat of neat cement completeas per standard design.

26

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

18.33.1 With common burnt clay F.P.S.(non modular)bricks of class designation 7.5

2.00 each

18.38 Painting of GI pipes and fittings with syntheticenamel white paint over a ready mixed primingcoat, both of approved quality for new work.

18.38.1 15 mm dia 15.00 Metre

18.38.2 20 mm dia 20.00 Metre

18.38.3 25 mm dia 18.00 Metre

18.38.4 32 mm dia 20.00 Metre

18.38.5 40 mm dia 20.00 Metre

18.40 Painting G.I. pipes and fittings with two coats ofanti corrosive bitumastic paint of approvedquality.






18.41 Providing and filling sand of grading zone V or coarse grade alround the GI pipes in externalwork.




27

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

18.46 Providing and fixing G.I. Union in GI pipesincluding cutting and threading the pipe andmaking long screws etc. complete (new work).

18.46.1 15 mm dia 6.00 Each

18.46.2 20 mm dia 7.00 Each

18.46.3 25 mm dia 10.00 Each

18.46.4 32 mm dia 10.00 Each

18.46.5 40 mm dia 7.00 Each

18.48 Providing and placing on terrace (at all floorlevels) polyethylene water storage tank ISI :12701 marked with cover and suitable lockingarrangement and making necessary holes forinlet, outlet and overflow pipes but without fittingsand the base support for tank. (In combination of25000+20000+10000 ltrs.)

55000.00 Per ltr

18.49 Providing and fixing C.P. brass bib cock ofapproved quality conforming to IS:8931

18.49.1 15 mm nominal bore. 5.00 Each

18.51 Providing and fixing C.P. brass long body bibcock of approved quality conforming to ISstandards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore 7.00 Each

18.53 Providing and fixing C.P. brass angle valve forbasin mixer and geyser points of approved qualityconforming to IS:8931

18.53.1 15 mm nominal bore 50.00 Each

28

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

18.78 Making chases upto 7.5x7.5 cm in walls includingmaking good and finishing with matching surfaceafter housing G.I. pipes etc.,

100.00 Metre

18.62 Providing and fixing PTMT Ball cock of approvedquality, colour and make complete with Epoxycoated aluminium rod with L.P./ H.P.H.D. plasticball.

18.62.5 50mm nominal bore, 242mm long. Weighing notless than 1240 gms.

1.00 each

18.79 Making hole upto 20x20 cm and embedding pipesupto 150 mm diameter in masonry and filling withcement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)including disposal of malba.

50.00 each

TOTAL

Non Scheduled Items NS-1 Providing and fixing G.I. Pipes complete with G.I.

Fittings and clamps, including cutting and makinggood the walls etc.

Internal work- Exposed on wall

NS-1.1 65 mm dia. Nominal bore 150.00 Metre



NS-2 P/F Gun Metal Ball valve with SS 304 ball, SSstem, renewable PTFE seat, teflon glandpacking, stanmdard bore, lever operated,screwed female threads, body and seat testpressure 500 Psi.

NS-2.1 15 mm dia. Nominal bore 18.00 Each

29

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items





NS-3 Supply Installation and testing cast iron wafertype Butterfly valves Class (PN 16) SS 304 Disc,Nitrile / EPDM / Neoprene lining (lever operatedupto 150 mm and gear operated for 200mm andmore) complete with 2 Nos matching flangesrubber insertion, nuts, bolts and washer etc. offollowing sizes





NS-4 Supply Installation and testing C.I. Dual platewafer type non-return valves (PN 1.6), ductileiron disc, 416 SS stem, EPDM lining, S.Steelspring complete with 2 Nos. matching flanges,rubber insertion, nuts, bolts and washer etc. offollowing sizes.




NS-5 Providing and fixing antimosquito overflow grating100-80 mm dia (for underground tanks only)

3.00 No

30

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-6 Providing and fixing 25 mm dia gunmetal fittingfor water level indicator gauge with isolation cockat top and bottom heavy gauge transparentpolyethylene tube of upto 2.5 M length, 100 mmwide x 20 mm thick teak wood indicating boardpainted with level indications in cms and litres .

No 3.00

NS-7 Providing, fabricating and fixing heavy class MS.pipe puddle flanges of required size to watertanks including the cost of galvanizing.

NS-7.1 25 mm dia 6.00 No

NS-7.2 40 mm dia 1.00 No

NS-7.3 50 mm dia 3.00 No

NS-7.4 65 mm dia 4.00 No

NS-7.5 80 mm dia 5.00 No

NS-7.6 100 mm dia 2.00 No

NS-7.7 150 mm dia 1.00 No

NS-7.8 200 mm dia 1.00 No

NS-7.9 250 mm dia No

TOTAL14

19.1 Providing, laying and jointing glazedstoneware pipes Class SP-1 with stiff mixture ofcement mortar in the proportion of 1:1 ( 1cement : 1 fine sand) including testing ofjoints etc. complete.

19.1.1 100 mm dia 40.00 Metre

19.1.2 150 mm dia 15.00 Metre

19.1.3 200 mm dia 15.00 Metre

SUB-HEAD No. : 14 : DRAINAGE

31

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

19.4 Providing and fixing square mouth S.W. gully trapClass SP-1complete with C.I. grating, brickmasonry chamber with water tight C.I. coverwith frame of 300x300 mm size (inside) theweight of cover to be not less than 4.50 Kg andframe to be not less than 2.70 Kg. as perstandard design.

19.4.2.2 150x100 mm size P type with Sewer bricksconfirming to I.S. 4885.

2.00 Each

19.7 Constructing brick masonry manhole in cementmortar 1:4 (1 cement : 4 coarse sand) RCC topslab with 1:2:4 mix ( 1 cement: 2 coarse sand: 4graded stone aggregate 20 mm nominal size)foundation concrete 1:4:8 mix (1 cement: 4coarse sand: 8 graded stone aggregate 40 mmnominal size) inside plastering 12 mm thick withcement mortar 1:3 (1 cement: 3 coarse sand)finished with a floating coat of neat cementmaking channels in cement concrete 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size) finished with afloating coat of neat cement complete as perstandard design.

19.7.1.2 Inside size 90x80 cms and 45 cms deepincluding CI cover with frame (Light duty)610x455mm internal diamesions total weight ofcover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)with sewer bricks IS4885.

2.00 each

32

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

19.7.2 Inside size 120x90 cms and 90 cms deepincluding CI cover with frame (medium duty) 500mm internal diameter total weight of cover andframe to be not less than 116 kg ( weight of cover58 kg and weight of frame 58 kg) with with sewerbricks IS 4885..

19.7.2.2 with sewer bricks IS 4885.. 2.00 Each

19.8.1 Extra for depth for manholes.

19.8.1.2 Size 90x80 cm. With sewer bricks I.S. 4885 2.00 Metre

19.8.2.2 Size 120x90 cm. With sewer bricks I.S. 4885 0.50 Metre

19.9 Constructing brick masonry circular typemanhole 0.91m internal dia at bottom and 0.56 mdia at top in cement mortar 1:4 (1cement:4coarse sand), inside cement plaster 12 mmthick with cement mortar 1:3 (1 cement: 3 coarsesand) finished with a floating coat of neat cement,foundation concrete 1:3:6 mix (1 cement: 3coarse sand: 6 graded stone aggregate 40 mmnominal size), and making necessary channel incement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size)finished with a floating coat of neat cement as perstandard design.

33

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

19.9.1 0.91 m deep with S.F.R.C. cover and frame(heavy duty, HD-20 grade designation) 560mminternal diameter conforming to I.S. 12592, totalweight of cover and frame to be not less than182kg., fixed in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shutteringall complete. (Excavation, foot rests and 12mmthick cement plaster at the external surface shallbe paid for separately) :

19.9.1.2 With Sewer bricks conforming to IS : 4885 2.00 EACH19.10 Extra depth for circular type manhole 0.91 m

internal dia (at bottom ) 0.91 to 1.67 m

19.10.2 With Sewer bricks conforming to IS : 4885 1.50 Metre

34

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

19.16 Providing orange colour safety foot rest ofminimum 6 mm thick plastic encapsulated asperIS: 10910 on 12mm dia steel bar conforming to IS:1786 having minimun cross section as 23 mm x25 mm and over all minimum length 263mm andwidth as 165mm with minimum 112mm spacebetween protruded legs having 2mm tread on topsurface by ribbing or chequering besidesnecessary and adequate anchoring projectionson tail length on 138mm as per standard drawingand suitable to with stand the bend test andchemical resistance test as per specificationsand heaving manufacture"s permanentidentification mark to be visible even after fixing "incluting fixing in manholes with 30x20x15 cmcement concrete block 1:3:6: (1 cement :3 coarsesand :6 graded stone aggregate 20mm nominalsize )complete as per design.

Each 16.00

19.18 Supplying and fixing C.I. cover without frame formainholes:

19.18.3 560 mm diameter C.I. cover (heavy duity) theweight of the cover to be not less than 108 kg

2.00 EACH

19.27 Constructing brick masonry road gully chamber50x45x60 cms with bricks of class designation 75in cement mortar 1:5 (1cement : 5 fine sand)including 500x450 mm pre cast RCC horizontalgrating with frame, complete as per standarddesign with FPS bricks.

19.27.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5

5.00 Each

35

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

TOTAL

Non Scheduled Items NS-1 Providing and laying non pressure NP2 class

(light duty) R.C.C. (S&S) pipes jointed with stiffmixture cement mortar in the proportion of 1:2 (1cement: 2 fine sand) including the cost of rubberring and testing of joints etc. complete.

NS-1.3 300 mm dia R.C.C. pipe 10.00 Metre

NS-2 Providing and laying non pressure NP3 class (light duty) R.C.C. (S&S) pipes jointed with stiffmixture cement mortar in the proportion of 1:2 (1cement: 2 fine sand) including the cost of rubberring and testing of joints etc. complete.



NS-3 Providing and laying cement concrete 1:4:8 mix(1 cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size) alround S.W./RCC pipes including bed concrete as perstandard design.

NS-3.1 100 mm diameter 15.00 Metre





36

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-4 Providing, laying & jointing in position PVC pipeconforming to IS:4985:1988 and suitable for therespective working pressures with all fittings andaccessories e.g. couplings, tees, bends,reducers, clamps, screwed adapters, flanged tailpieces etc. jointing as per manufacturers'instructions. (Rain Water Pipes).

NS-4.1 PVC pipe 63mm-6 kg/cm2 Metre 0.00





NS-5 Providing and fixing soil, waste and vent pipes.(IS:3989)

NS-5.1 50 mm dia Sand Cast Iron S&S. 10.00 MetreNS-6 Providing and fixing M.S. holder-bat clamps of

approved design to Sand Cast iron/cast iron(spun) pipe embedded in and including cementconcrete blocks 10x10x10cm of 1:2:4 mix (1cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size) including cost ofcutting holes and making good the walls etc. :

NS-6.1 50 mm dia Sand Cast Iron S&S. 3.00 Each

NS-7 Providing and fixing single equal plain junction ofrequired degree. (IS 3989)

NS-7.1 50x50x50 mm Centrifugally Cast (spun) IronS&S.

1.00 Each

37

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-8 Providing and fixing single unequal plain junctionof required degree. (IS 3989)


3.00 Each


3.00 Each

NS-9 Providing and fixing deep seal trap (P/S) of selfcleasing design Centrifugally Cast (spun) IronS&S with or without vent arm complete, includingcost of cutting and making good the walls andfloors.

NS-9.1 100 mm inlet and 100 mm outlet CentrifugallyCast (spun) Iron S&S.

3.00 Each

NS-9.2 100 mm inlet and 75 mm outlet Centrifugally Cast(spun) Iron S&S.

3.00 Each

NS-10 Providing and fixing cast brass clean out plugwith suitable insert keys for opening, malethreaded joint with G.I. socket caulked to HCIsoil pipe or C.I.(LA) pipe including cost of leadjoint.

NS-10.1 100 mm dia 5.00 Each

NS-11 Providing and fixing G.I. inlet fitting with 1 or 2inlets fabricated from 100 mm dia G.I. pipes andwelded G.I. sockets fixed to C.I. trap with leadcaulked joint and set in cement concrete as perdrawing complete.

3.00 Each

NS-12 Providing and fixing floor drain made out of100x50 mm G.I. Elbow connected to G.I. Pipecomplete

6.00 Each

38

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-13 Providing and fixing stainless steel (matt finish)grating with frame 125 mm dia of approved make. For floor traps, floor drains and balcony drainage.(Make: Chilly SKS G-5) /CaN.S.Iy)

5.00 Each

NS-14 Providing and laying in position cement concreteof specified grade excluding the cost of centringand shuttering.1:2:4 ( 1cement : 2 Coarse sand :4 graded stone aggregate 20 mm nominal size )

NS-14.1 For 100 mm dia. 20.00 MetreNS-14.2 For 75 mm dia. 18.00 MetreNS-14.3 For 50 mm dia. 22.00 Metre

TOTAL

1521.1 Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extrudedbuilt up standard tubular sections/ appropriate Zsections and other sections of approved makeconforming to IS: 733 and IS : 1285, fixing withdase fastener of required dia and size includingnecessary filling upto gaps at junctions i.e. at top,bottom and sides with required EPDM rubberneopreme gasket etc. Aluminium sections shallbe smooth, rust free, straight, mitred and jointedmechanically wherever required including cleatangle, Aluminium snap beading for glazing /panelling, C.P. brass / stainless steel screws, allcomplete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing andpanelling and dash fasteners to be paid forseparately) :

SUB-HEAD No. - 15 : ALUMINIUM WORK

39

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

21.1.1 For fixed portion.21.1.1.1 Anodised aluminium (anodised transparent or

dyed to required shade according to IS: 1868,Minimum anodiccoating of grade AC 15)

437.90 kg.

21.1.2 For shutters of doors, windows & ventilatorsincluding providing and fixing hinges/ pivots andmaking provision for fixing of fittings whereverrequired including the cost of EPDM rubber /neoprene gasket required (Fittings shall be paidfor separately)

21.1.2.1 Anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868,Minimum anodiccoating of grade AC 15)

295.55 kg.

21.3 P/F glazing in aluminium doors, window,ventilator shutters and partitions etc. with EPDM/neoprene gasket etc. complete as per thearchitectural drawings and the directions ofEngineer-in-charge. ( Cost of aluminium snapbeading shall be paid in basic item):

21.3.2 With float glass panes of 5.50 mm thickness 99.19 sqm.

21.4 P/F double action Hydraulic floor spring of approvedbrand and manufacture IS: 6315 having brand logoenborsed on body plate with double spring mechanismand door weight upto 125kg for doors including cost ofcutting floors embedding in floors as required andmaking good the same matching to the existing floorfinishing and cover plates pivot and single piece MS.Sheet outer box with slide plate etc. complete as perthe direction of engineer-in-charge

40

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

21.4.1 With stainless steel cover plate 7.00 each21.15 Providing and fixing aluminium casement

windows fastener of required length foraluminium windows with necessary screws etc.complete.

21.15.1 Anodized (AC 15) aluminium 41.00 each

TOTALNon Scheduled Items

NS-1 P/F structural glazing using specially designedaluminium grade 63400 WP IS:733 and ID:1285.Pure polyser powder coated 65 microns inapproved colour and shade through adequatelydesigned MS galvanised/ aluminium anchorbrackets. Work shall include designing, shopdrawing, structural calculations based on thermalmovement, air filtration, water penetration,seismic movement and structural movement asper standard procedure. The structure glazingshall be harmetically insulated 6mm thick heatreflective toughened, hard coated of colour glass( non toughened) on inside with 12mm airgap.The whole work to be done as perarchitectural elevation drawing i/c requiredaluminium subframe, silicne filling with masonry /RCC work.

348.60 sqm.

41

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-2 Providing Fixing of aluminum composite panel(ACP) made out of 4 mm thick (0.5 + 3.5+0.5)with PVDF core coloured matt finish panel onboth side (Total thickness of the panel shall be4.5 mm) of approved make inclusive of aluminumSection framework out of 25mm x 50mm sizerectangular section ACP make alstrong /eludecor/eva bond/alupan complete as per drawing and asper entire satisfaction of Engineer-in-Charge.

192.55 sqm.

NS-3 Stainless steel work revated, bolted or welded inbuilt up sections/framed work to staircase railing,ladder railings including top hand railing of 50mmdia S.S. pipe with three horizontal runners of16mm dia S.S. pipe and Placing 40mm dia S.S.pipe baluster at one metre apart or part thereof toplace baluster at corner of staircases/flightincluding cutting, hoisting and fixing in positionwith all materials of 304 grade of stainless steelwith 8% nickle contents, joints wil be argonwelded complete in all respect as per drawingsand directed by Engineer in charge.

32.00 Mtr.

NS-4 DEDUCT for providing galvanised M.S. wiregauge of average width of apeture 1.4mm withwire of dia.0.63 mm for doors, windows andcelestory windows instead of float glass panes of5mm thick

0.95 sqm.

TOTAL16 SUB-HEAD No. : 16 : WATER PROOFING

42

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

22.3 Providing and laying water proofing treatment tovertical and horizontal surfaces of depressedportions of W.C., kitchen and the like consistingof :i) Ist course of applying cement slurry @ 4.4Kg/sqm mixed with water proofing compoundconforming to IS 2645 in recommendedproportions including rounding off junction ofvertical and horizontal surface.ii) IInd course of 20mm cement plaster 1:3 (1cement : 3 coarse sand) mixed with waterproofing compound in recommended proportionincluding rounding off junction of vertical andhorizontal surface.iii) IIIrd course of applying blown or residualbitumen applied hot at 1.7 Kg. per sum of area.

iv) IVth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen@ 1.7 Kg/sum.)

121.52 sqm.

22.7 Providing and laying integral cement based waterproofing treatment including preparation ofsurface as required for treatment of roofs,balconies, terraces etc consisting of followingoperations:a) Applying a slurry coat of neat cement using2.75 kg/sqm. of cement admixed with waterproofing compound conforming to IS. 2645 andapproved by Engineer-in-charge over the RCCslab including adjoining walls upto 300mm heightincluding cleaning the surface before treatment.

43

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

b) Laying brick bats with mortar using brokenbricks/brick bats 25 mm to 115mm size with 50%of cement mortar 1:5 (1 cement : 5 coarse sand)admixed with water proofing compoundconforming to IS : 2645 and approved byEngineer-in-charge over 20 mm thick layer ofcement mortar of mix 1:5 (1 cement :5 coarsesand ) admixed with water proofing compoundconforming to IS : 2645 and approved byEngineer-in-charge to required slope and treatingsimilarly the adjoining walls upto 300 mm heightincluding rounding of junctions of walls and slabs

c) After two days of proper curing applying asecond coat of cement slurry using 2.75kg/ sqmof cement admixed with water proofingcompound conforming to IS : 2645 and approvedby Engineer-in-charge.

d) Finishing the surface with 20 mm thick jointlesscement mortar of mix 1:4 (1 cement :4 coarsesand) admixed with water proofing compoundconforming to IS : 2645 and approved byEngineer-in-charge including laying glass fibrecloth of approved quality in top layer of plasterand finally finishing the surface with trowel withneat cement slurry and making pattern of300x300 mm square 3mm deep.

22.7.1 e) The whole terrace so finished shall be floodedwith water for a minimum period of two weeks forcuring and for final test. All above operations tobe done in order and as directed and specified bythe Engineer-in-Charge :

595.90 sqm.

44

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

With average thickness of 120mm and minimumthickness at khurra as 65 mm

TOTAL

17FIRE SUPPRESSION WORKS

NS-1 Providing and fixing Single headed, StainlessSteel SS 304, ISI marked oblique pattern hydrantlanding valve with 80 mm dia flanged inlet and63 mm dia instantaneous type female outletcomplete with gunmetal cap and G.I. chain, twistrelease type plug and all accessories as per13:5290-1983 (Type 'A')

3.00 each

NS-2 Supply, Installation & Testing of First-Aid FireHose Reel wall mounting swinging typecomplete with drum,bracket, 25 mm dia. Ballvalve and 20 mm dia.x 36M long high pressureHose Reel tubing as per IS:444 with Gun-Metalshut-off nozzle having 5mm dia.orifice. TheHose Reel shall strictly confirm to IS;884-1985.

3.00 each

NS-3 Providing and fixing Non-percolating flexiblehose (RRL type-'A') ISI marked (IS:636) 63 mmdia x 15 M long complete with instantaneoustype gunmetal / SS, 63 mm dia. IS markedMale and female couplings (IS:903) bound andrivetted to hose pipe with copper rivets and 1.5mm copper wire.

6.00 each

SUB-HEAD No. : 17 : MISCELLANEOUS WORK (Non Scheduled Items)

45

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-4 Providing and fixing Controlled Percolating (CP)Hose ISI marked (IS:8423) 63 mm dia x 15 mlong complete with instanteneous type gunmetal /SS, 63 mm dia, ISI marked Male & Femalecouplings (IS:903) bound and rivetted to hosepipe with copper rivets and 1.5 mm copper wire.

3.00 each

NS-5 Providing and fixing Stainless Steel 304, 63mmdia short size branch pipes with 20 mm dianozzles with 63mm SS instantaneous couplingISI marked (IS: 903).

6.00 each

NS-6 Supply, Installation & Testing of M.S. fire hosecabinet fabricated from 16 g M.S. sheet of fullywelded construction with hinged double front doorwith locking arrangement, full glass door 4 mmthick approved by local fire aurthority, paintedwith one coat of primer, stove enamelled fire redfinished, "Fire Hose" written on front, suitable toaccommodate 1Hydrant landing valve, 1 fire hosereel, 2 nos. 15m long, 63mmdia hose,1-branchpipe, 1 fire-man's axe, including suitably mountedon a raised masonry platform as required.(Approx.size 0.9m x 2.1m x 0.6m)

3.00 each

46

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-7 Weather proof hose cabinets fabricated from 16g M.S. Sheet with full glass door and lockingarrangement, suitable to accommodate oneHydrant landing valve, 2 nos. 15 M long hoseand 1 No branch pipe. The cabinet shall bepainted with one coat of primer and finished stoveenamelled "Fire Red", "Fire Hose" written on frontincluding suitably mounted on a raised masonryplatform as required. (Approx 0.75m x 0.6 m x 0.3m).

4.00 each

NS-8 Air cushion tank 250 mm dia. x 1.0 M high withdished top, made of minimum 6 mm thickM.S. pipe/plate complete with 25 mm dia. BrassAir Valve (Ball valve, pressure guage type),25 mm dia. Stop with brass stop cock,nipple,tees, elbow and all accessories as requiredincl. fixing brackets.

1.00 each

47

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-9 Supply, Installation & Testing of Mild Steel pipe(IS:1239 Part-I) heavy class including cutting,threading, welding etc. bends, elbows reducers,unions, flanges, rubber gasket clamps, G.I. nutsbolts washer, hangers etc., including allnecessary pipe support, cutting to size, drilling,welding / fixing and welding insert plates in RCCstructural members wherever required fixing thepipe on wall / floor / ceiling using anchor fastners,G.I. pipe sleeves of higher dia shall be providedwherever the pipes are crossing the wall or floorsand sealing the sleeve with glass wool and firesealent, cutting holes in brick or RCC walls/slabsand making good the same complete includingpainting with one coat of primer and two or morecoats of synthetic enamel paint of approved makeand shade including, as directed by Engineer-in-Charge.

For Downcomer / Hose Reel PipingNS-9.1 100 mm dia 25.00 RM

NS-9.3 25 mm dia 5.00 RMNS-10 Supply Installation and testing C.I. Dual plate

wafer type non-return valves (PN 1.6), ductileiron disc, 416 SS stem, EPDM lining, S.Steelspring complete with 2 Nos. matching flanges,rubber insertion, nuts, bolts and washer etc. offollowing sizes.

NS-10.1 100 mm dia 1.00 Each

NS-9.2 80 mm dia 7.00 RM

48

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-11 Supply Installation and testing cast iron wafertype Butterfly valves Class (PN 16) SS 304 Disc,Nitrile / EPDM / Neoprene lining (lever operatedupto 150 mm and gear operated for 200mm andmore) complete with 2 Nos matching flangesrubber insertion, nuts, bolts and washer etc. offollowing sizes

NS-11.1 100 mm dia nominal bore 1.00 EachNS-12 Providing and fixing forged brass Ball valve with

SS ball and PTFE teflon seats and seals, full borespindle type, M.S. plate handle, with PVC sleeve,confirming to I.S. 9890 class 125, female BSPthreads, suitable for 15 kg/sq cm. complete in allrespects.

NS-12.1 20 mm dia nominal bore 5.00 eachNS-12.2 25 mm dia nominal bore 5.00 eachNS-13 Providing and fixing dial type pressure gauge with

ball valve and pipe at hydrant station, complete inall respects. Dial dia 100 mm, calibration 0-15kg/sq cm. Valve shall be paid separately.

a) 20 mm dia nominal bore 5.00 each

NS-14 Providing and fixing standard fireman's axe withheavy insulated rubber handle conforming to IS:926 complete.

3.00 each

FIRE PUMPS & ACCESSORIESNS-15 SUPPLY, INSTALLATION, TESTING. &

COMMISSIONING OF:

Electrical Motor Driven Fire Pumping setsuitable for automatic operation consisting of thefollowing as per the specifications.

49

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

a) Horizontally mounted, centrifugal type single/multi stage fire pump having cast iron body,bronze impeller,stainless steel shaft SS 410,grease lubricated bearing, end suction,mechanical seal & capable of delivering 450LPM against a total head of 30 M complete withnecessary pressure gauge with GM cocks on thedelivery side including bypass arrangement (with50 valve and upto 5M G.I. Medium pipes) forperiodical testing of the working of the testing ofthe working of the pumping set .

b) Squirrel cage induction motor totally enclosedfan cooled type suitable for 415 Volts +_ 15%, 3phase, 50 HZ A.C.supply, H.P. of suitablecapacity for the above pump coupled withflexible copuling including earthing as perrelevant Indian Standard & specifications.c) Common bed plate for mounting Pump andMotor fabricated of Motor fabricated of suitableM.S.Channel as per manufacturer*srecommendations.d) Suitable RC.C Pump-Foundations as permanufacturer's design and 4 nos. Dunlop (cushyfoot) heavy duty Antivibration mounting pads. (foreach motor).

1.00 set

NS-16 Providing and fixing C.I. “Y” suction strainer withstainless steel perforated sheet screen, flangedends iner installed outside water tanks. (Make:Zoloto / Sant or equivalent)

150 mm dia 1.00 each

50

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-17 Providing and fixing double flanged vertical airvessel fabricated shell from 8 mm thick & dishedends 10 mm thick M.S.plate, 200 mm dia and1.50 m high common for fire terrace pumpcomplete with pressure switches to operate thepump at drop of pressure finished with two coatsof Red enamel paint of first grade over one coatof primer externally & two coats of epoxy coatinginside.

1.00 each

NS-18 Supply, Installation, Testing & Commissioning ofcubical type floor mounted Fire Pump ControlPanel fabricated from 14 g M.S. Sheet dulypowder coated finish of approved shade andcomprising of :

INCOMING:a) One 63 amp. TP +NL M.C.C.B.with rotaryhandle of beaking capacity 35KAb) One-Volt Meter (0-500 V) with selector switch

c) One Set indicating lampsBUS BARS OUTGOINGa) 63 A TPN BUS BAR (Aluminium).

b) One - 63 Amp.TP +NL M.C.C.B.with rotaryhandle of beaking capacity 35KA

c) One Fully Automatic D.O.L Starter suitable forterrace Pump Motor with over load relay, timerpush buttons and Auto/Manual selector switch.

d) One panel type Amp. meters with ASS. CTSetc.e) One set of On/Off - neon indicating lamp.

51

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

f) All interconnecting power & control wires/cablesof suitable size within the panel and from panelto motor, pressure switches, level switches, cableTray, earthing tape 25x4 mm, pipes etc. includingbrass glands termination within fire pump houseand earthing as per specifications (Power cablesize shall not be less than 2 Nos.3x 10sq mm forpump motor.

1.00 set

NS-19 Fabricating & installing following size ofperforated M.S. cable tray including horizontaland vertical bends, reducers, tees, crossmembers and other accessories as required andduly suspended from the cabling with M.S.suspenders and including painting etc. asrequired.

NS-19.1 150 mm width x 50 mm depth x 2 mm thickness 5.00 Meter

NS-20 Providing and fixing reselient rubber neoprenelined single arch vibration eliminators suitable forraw water upto 45 deg. C. temperature workingpressure 7 kg and test pressure 14 kg per sq.cm.

NS-20.1 80 mm dia 1.00 EachNS-20.2 100 mm dia 1.00 EachNS-20.3 150 mm dia 1.00 Each

52

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

NS-21 Providing and fixing ABC type fire extinguishersconsisting of welded MS cylindrical body,squeeze lever discharge valve fitted withpressure indicating gauge internal dischargetube, 30 cms long high pressure discharge hose,discharge nozzle, suspension bracket,conforming to ISI finished externally with redenamel paint and fixed to wall with bracketscomplete with internal charge.Capacity 5.0kg. I.S.I. Marked.

6.00 Each

Total

FALSE CEILINGNS-22 Gypsum False ceiling (PLAIN)

53

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

Providing and fixing suspended false ceilingwhich includes providing and fixing GI perimeterchannels of size 0.55 mm. Thk. having one flangeof 20 mm and another flange of 30 mm and webof 27 mm along the perimeter of the ceiling,screw fixed to brick/concrete wall/ partition withhelp of nylon sleeves and screws, at 610 mmcenters. The suspended GI intermediatechannels of size 45 mm,0.9mm thk with twoflanges of 15 mm each from the soffit at 1220mm centers with ceiling angles with ceiling angleof width 25mm x 10mm x 0.55mm thk fixed tosoffit with GI cleat and steel expansion fasteners.Ceiling section of 0.55 mm thk having web of51.5 mm and two flanges of 26 mm each with lipsof 10.5mmare then fixed to the intermediatechannels with help of connecting clips and indirection perpendicular to the intermediatechannel with centers 12.5 mm tapered edgegypsum plaster board (Confirming to IS-2095-1982) is then screw fixed to ceiling section with25 mm dry wall screws at 230mm centers. Screwfixing is done mechanically either with screwdriver or drilling machine with suitableattachment.

70.50 SQM

NS-23 Modular False ceiling

54

S.No. Description


Qty Unit Quoted

Unit Rate

DSR-2012 Items/ NS

Items

Providing and fixing modular type suspendedfalse ceiling using gypsum board tiles ofapproved make with 24mm exposed grid.Thiscomprises of Gypsum tiles with PVC face andAluminium foil back in sizes of600mmX600mmX9mm and weight of 7kg/m2.This includes supply and installation of mainrunner spaced at 1200mm center securely fixedto structural soffit using approved suspensionsystem at 1200mm max centre and providing GIperimeter channel of size3000mmX19mmX19mm secured to wall at450mm max centre. The grid should be made of24mm wide T section flanges having rotarystiching on all section with a web height of 32 andload carrying capacity of 23.78 kg/m2. The Tsection should have galavinising of 120gm/m2.All asseccerioes including anchor fasteners withvertical hangers made of galvanised steel of size26mmX26mmX1.2mm with adjustable hook clipetc are included .All works to be carried as perthe directions of Engineer in charge. Any paintingworks wherever required shall be paid separately

890.00 SQM

NS-24 Cost of Dismantling & Demolition inclusivefoundations and disposal of all debris /unservicable materials from the site to Municipaldumping yard or as per instruction of Engineer-in-Charge including disposal of servicable materialsfrom the site.

1.00 job

NS-25 Salvage values for the cost of serviceablematerials of the building to RITES Ltd. /University of Allahabad.

1.00 job

Total

55

S.NO. SUB-HEAD DESCRIPTIONIn Words(Rs.) In Figures(Rupess)

1 SUB-HEAD - I INTERNAL WIRING RS.

2 SUBHEAD-II FANS & LIGHT FIXTURES RS.

3 SUBHEAD-III M.V. PANELS/ DISTRIBUTION BOARD RS.

4 SUBHEAD-IV L.T. CABLES RS.

5 SUBHEAD- V EARTHING RS.

6 SUBHEAD- VI LIGHTNING PROTECTION SYSTEM RS.

7 SUBHEAD- VII T.V. & TELEPHONE SYSTEM RS.

8 SUBHEAD- VIII FIRE DETECTION SYSTEM RS.

9 SUBHEAD- IX LAN SYSTEM RS.

10 SUBHEAD- X UPS SYSTEM RS.

11 SUBHEAD- XI SOLAR POWER PANELS RS.

TOTAL RS.

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING OF ELECTRICAL WORKS FOR PROPOSED SUMMARY OF COST – INTERNAL ELECTRICAL WORKS

AMOUNT (RS.)

GRAND TOTAL

USIC AT ALLAHABAD 1 Electrical works

S.NO DESCRIPTION OF ITEM UNIT QTY. Quoted

Unit Rate AmountIn figures (Rs.) In Words (Rs.) In figures (Rs.)

SCHEDULE OF QUANTITIES FOR INTERNAL ELECTRIFICATION WORKS.

SUB-HEAD - I : INTERNAL WIRING1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

a) Group -C Point 2552 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR

PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 3390

SUB-HEAD - I : INTERNAL WIRING

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 3390b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 900c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 300d) 4 x 6 sq.mm + 2 x 6 sq.mm. earth wire Metre 903 Supplying and fixing suitable size GI box with modular plate and cover in front on surface

or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Each 141

4 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Each 45

5 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Each 10

6 Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Each 3



7 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

a) 20mm dia PVC conduit Metre 200b) 25mm dia PVC conduit Metre 100c) 32mm dia PVC conduit Metre 50

TOTAL Sub Head I

1 Supplying, fixing, connecting, testing and commissioning of 1 x 28 watt T-5 fluorescent luminaire complete with electronic ballast, lockable holders and fluorescent lamp including connection etc. as required similar to Philips cat no. Adreno V2 1x28W T-5 or equivalent

Each 21

SUB-HEAD II - FANS & LIGHT FIXTURES:

2 Supplying, fixing, connecting, testing and commissioning of minimum 36 watt LED recessed type (600 mm X 600 mm) extruded aluminium luminaire with heat sink installed back side, high quality diffuser fix in front frame total system wattage less than 45W with LED make of Cree/ Nichea (36X1W LED) operating at 350 mA. lamp color 4000k, complete with electronic driver, CRI 80, lamp life 50,000 hrs, warranty 5 years , lockable holders and including connection etc. as required, similar to Philips cat no. Cirrus or equivalent

Each 156

3 Supply, installation, connecting, testing and commissioning of illuminated exit sign with 1 x 3 watt LED lamp including providing maintenance free batteries & charger capable of working for 2 hr duration mounted on ceiling/wall complete with the approved EXIT self adhesive labels as per site requirement as required similar to Prolite or equivalent

Each 3

4 Supplying, fixing, connecting, testing and commissioning of Bulkhead type light fitting complete with , wire guard, holder, electronic ballast 1 x 9 W lamp including connections etc. as required similar to Philips Cat. No. FXC101 or equivalent

Each 6

5 Supplying of recessed type LED down-lighter with high efficiency white reflector and high trasmittive diffuser ,fitting complete with, holder, driver, heat sink and LED (less than 10% THD), low depth with die cast aluminium housing 1 x 10W LED with CRI >70, including with driver connections etc. as required similar to Philips Cat no. Green LED 10 w BBS 150 or equivalent

Each 21



6 Supplying, erection, connecting, testing and commissioning of wall bracket fan 400 mm sweep with step speed regulator complete as required.

b) 400 mm sweep Each 157 Supplying, erection, connecting, testing and commissioning of following size heavy duty

exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.

a) 300 mm 1400 RPM Each 68 Supplying,installation, connecting, testing and commissioning of 2x26 watt CFL light Each 218 Supplying,installation, connecting, testing and commissioning of 2x26 watt CFL light

fixture with lamps, ballast , housing for ballast, bowl, suspension cables, including wiring and connections etc as required similar to Philips cat no. FPK550 HFB or equivalent

Each 21

9 Supplying, fixing, connecting, testing and commissioning of mirror light luminaire with 1 x 14 watt complete with electronic ballast, lamp including connection etc. complete as required similar to Philips Cat. No. FWZ 300 or equivalent

Each 6

10 Supply, installation, connecting, testing and commissioning of Motion sensor including all wiring in the existing conduits required similar to Philips cat no: photosensor or equivalent.

Each 15

TOTAL RS.SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD

1 Supplying and fixing following way prewired SP&N MCB distribution board of steel sheet for 240 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

a) 2 + 8 way, Double door Nos 1

SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD



2 Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box of sheet steel, of steel sheet for 415 volts on surface/ recess complete with loose wire box of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/ neutral link, earthing etc as required (But without MCB/ RCCB/ Isolator). (Note : Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.)

a) 8 way Double door Nos. 3b) 12 way Double door Nos. 43 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

a) 40 amps Nos 1a) 40 amps Nos 13.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

a) 40 amps Nos. 74 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole Nos. 2245 Supplying, installation, testing and commissioning of L.T. panel fully compartmentalized

cubical type sheet clad wall/floor mounted totally enclosed , switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having required fault capacity, housed with incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm,

Set 1

incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm, interconnection etc. accessories etc, as required as per specification and schematic diagram as required. (Light & Power panel)

INCOMER:-1 Nos.100 Amps. TPN MCCB (25 KA) with electronic releases.1 Set phase indication lights (R, Y, B)1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.1 No. 0-100 Amp. Ammeter (digital type) with inbuilt ASS BUS BARS:-200 Amps. TP&N aluminium bus bars (25 KA)OUT GOINGS:-5 Nos. 40A TPN, MCB (10KA).


Unit Rate AmountIn figures (Rs.) In Words (Rs.) In figures (Rs.)In figures (Rs.) In Words (Rs.) In figures (Rs.)

6 Supplying, installation, testing and commissioning of L.T. panel fully compartmentalized cubical type sheet clad wall/floor mounted totally enclosed , switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having required fault capacity, housed with incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm, interconnection etc. accessories etc, as required as per specification and schematic diagram as required.( Equipment Panel)

Set 1

INCOMER:-1 Nos. 250 Amps. TPN MCCB (25 KA) with electronic releases.1 Set phase indication lights (R, Y, B)1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.1 No. 0-250 Amp. Ammeter (digital type) with inbuilt ASS BUS BARS:-250 Amps. TP&N aluminium bus bars (25 KA)OUT GOINGS:-2 Nos. 160A TPN, MCCB (25KA).3 Nos. 100/63A TPN, MCCB (25KA).4 Nos. 63 A TPN, MCB (10KA).

7 Supplying, installation, testing and commissioning of L.T. panel fully compartmentalized cubical type sheet clad wall/floor mounted totally enclosed , switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having required fault capacity, housed with incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm, interconnection etc. accessories etc, as required as per specification and schematic diagram as required.. (UPS Panel)

Set 1

as required.. (UPS Panel)

INCOMER:-2 Nos. 100/63 Amps. 4P MCCB (25 KA) with electronic releases.1 Set phase indication lights (R, Y, B)1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.1 No. 0-100 Amp. Ammeter (digital type) with inbuilt ASS BUS BARS:-200 Amps. 4P Aluminium bus bars (25 KA)OUT GOINGS:-5 Nos. 40A 4P, MCB (10KA).



8 Supplying, installation, testing and commissioning of L.T. panel fully compartmentalized cubical type sheet clad floor mounted totally enclosed , extensible on both sides, switch

Set 1cubical type sheet clad floor mounted totally enclosed , extensible on both sides, switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having 50KA fault capacity, housed with incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm, interconnection etc. with indication lamps, accessories etc, as required as per specification and schematic diagram as required. (MAIN LT PANEL)

INCOMER :-1 No. 800A TPN MCCB(50 KA) with electronic releases1 No.Volt Meter (digital type) with inbuilt VSS & control fuses.1 No.P.F. Meter (digital type)1 No.KWH meter (digital type)1 No. C.T.800 / 5A Class-1 for Capacitor panel.1 Set of phase indication lights R,Y,B.1 Set of phase indication lights R,Y,B.CHANGE OVER SWITCH1 No. 800 AMPS 4P Automatic change over switchBUS BARS:-800 Amps. 4P Aluminium bus bars (50 KA)OUTGOINGS:-2 No. 400A TPN MCCB (35 KA) with electronic releases2 No. 250A TPN MCCB (35 KA) with electronic releases8 No. 100A TPN MCCB(35 KA) with electronic releasesNote:All outgoing feeders shall have ON/OFF indication lights.

9 Supplying, installation, testing and commissioning of free standing, front operated cubical type capacitor control panel with aluminium bus bars of current density 0.8Amps/sq.mm.& rupturing capacity(25KA), LED indicating lamps interconnections with under noted switch

Set 1

rupturing capacity(25KA), LED indicating lamps interconnections with under noted switch gears as per technical specifications and drawings complete as required. All MCCB shall have rotary operating handles. (capacitor control panel)

a. 180 kvar capcitor control panel1 No. 400A ,TPN ,MCCB with electronic releases1 No. Ammeter (digital type) with inbuilt ASS 1 No.Volt Meter (digital type) with inbuilt VSS & control fuses.1 No.12 step A.P.F.C.Relay (digital type)3 Nos. CTs- 400/5 Amps. Cl-11 Set phase indication lights (R, Y, B)400 Amps. TP&N aluminium bus bars (50 KA)6 No. 40 Amps. TPN MCB(25 KA) with thermo magnetic releases.



6 No. 20 Amps. TPN MCB(25 KA) with thermo magnetic releases.6 No. 20 KVAR TP Shunt capacitor with discharge register and 7% D-tuned Harmonic reactor filter6 No. 10 KVAR TP Shunt capacitor with discharge register and 7% D-tuned Harmonic reactor filter6 No. 40 Amps. TP capacitor duty contactors.6 No. 20 Amps. TP capacitor duty contactors.1 No. Auto-Off-Manual selector switch.12 Sets self illuminated Red-Green ON-OFF push buttons.

10 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Each 10

TOTAL RS.

1 Supply, laying and testing of under noted sizes of Aluminium conductor XLPE insulated SUB-HEAD -IV : L.T. CABLES

1 Supply, laying and testing of under noted sizes of Aluminium conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required.

a) 3.5 x 300 sq.mm Metre 300b) 3.5 x 240 sq.mm Metre 200c) 3.5 x 50 sq.mm Metre 200d) 4 x 25 sq.mm Metre 500e) 4 x 16 sq.mm Metre 2002 Supplying and making end termination with brass compression gland and aluminium lugs

for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

a) 3.5 x 300 sq.mm Set 18b) 3.5 x 240 sq.mm Set 10c) 3.5 x 50 sq.mm Set 4d) 4 x 25 sq.mm Set 12e) 4 x 16 sq.mm Set 83 Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground

complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

a) 100mm dia Metre 20b) 250mm dia Metre 50



4 Supply of under noted sizes of copper conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required.

a) 4 x 25 sq.mm Metre 50b) 4 x 16 sq.mm Metre 200c) 4 x 10 sq.mm Metre 150d) 4 x 2.5 sq.mm Metre 3005 Supply and making end termination with brass double compression gland including

providing and crimping of copper solderless lugs / ferrules for XLPE armoured power copper conductor cable 1.1 KV grade of following sizes:-

a) 4 x 25 sq.mm Set 2a) 4 x 25 sq.mm Set 2b) 4 x 16 sq.mm Set 6c) 4 x 10 sq.mm Set 6d) 4 x 2.5 sq.mm Set 386 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV

grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

a) Upto 35 sq. mm Metre 200b) Above 185 sq. mm and upto 400 sq. mm Metre 2007 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV

grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a) Above 185 sq. mm and upto 400 sq. mm Metre 140a) Above 185 sq. mm and upto 400 sq. mm Metre 140b) Above 35 sq. mm and upto 95 sq. mm Metre 40c) Upto 35 sq. mm Metre 2608 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of

1.1 KV grade of following size on wall surface as required.

a) Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) Metre 300b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Metre 160c) Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 8409 Supply and fixing of cable tray/steel work in position including clamps, frame work of

flats, angle iron, channel with fabrication work including cutting, bending, welding, drilling bolting etc. as per design as required. One coat of primer and 2 coats of enamel paint of approved shade shall be provided.

Kg. 1000



10 Supplying and installing following size of perforated pre-painted M.S. cable trays with 10 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

a) 300 mm width X 50 mm depth X 1.6 mm thickness Metre 50TOTAL RS.

1 Supply, Erection, Installation & Commissioning of the maintenance free Earthing system . Earth Enhancing Compounds should be used to treat the soil for lowering the effective ground impedance. Maintenance free earth pits made of ground enhancing material (GEM) - 3 or 4 bags of 11.3 Kg each and 250 microns copper bonded ground rods - 4 nos of size 5' length and 5/8" diameter connected with each other with 25 x 3 mm Copper Strip and high performance earth clamps.

Each 2SUB-HEAD -V : EARTHING

2 Supply, laying, testing of under noted sizes of copper conductor PVC insulated PVC sheathed & PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required.

Metre 50

a. 1C x 120 Sq.mm.3 Supplying and laying 40 mm X 4 mm tinned copper braided strip as earth electrode,

including connection/ terminating with nut, bolt, spring, washer etc. complete as required.Metre 100

4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Each 4

pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Each 4

6 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Metre 40



7 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Metre 40

8 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Metre 20

9 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as

Metre 20

required.

10 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Metre 500

11 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Metre 100

12 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Metre 100

TOTAL RS.SUBHEAD-VI - LIGHTNING PROTECTION SYSTEM

1 Supply, Erection, Installation & Commissioning of External Lightning Wide Area Protection System based on pro-active Early Streamer Emission (ESE) Technology. No external power source required. Break down time not more than 245.5 Micro second. Wind Resistance up to 120miles/hours. Produces a leader of not less than 2x10E8 V/m/s in the lightning generated electromagnetic field with Level-I protection radius of 79 meters at 5 mtr. Mast including mast for supporting the device. Device confirming to NFC17-102 & UNE 21186 standards & CPRI Tested.

Set 1

SUBHEAD-VI - LIGHTNING PROTECTION SYSTEM



2 Supply, Erection, Installation & Commissioning of the Down Conductor which is a 70 Sq. mm flexibile, single core pvc insulated copper cable .

RM 20mm flexibile, single core pvc insulated copper cable .

3 Supply, Erection, Installation & Commissioning of Lightning Event Counter (Model: LEC-IV) for counting the number of lightning strikes without any power supply. The Counter should be mounted on the Down Conductor and the triggering impulse should be > = 1.5 KA for 8/20µs. The Lightning Event Counter should be robust, non-resettable mechanical counter with IP65 rated enclosure suitable for external application.

Set 1

4 Supply, Erection, Installation & Commissioning of the Earthing system which should cater for the Lightning Protection System earthing and should be maintenance free. Earth Enhancing Compounds should be used to treat the soil for lowering the effective ground impedance. Maintenance free earth pits made of ground enhancing material (GEM) - 3 or 4 bags of 11.3 Kg each and 250 microns copper bonded ground rods - 4 nos of size 5' length and 5/8" diameter connected with each other with 25 x 3 mm Copper Strip and high

Set 1

and 5/8" diameter connected with each other with 25 x 3 mm Copper Strip and high performance earth clamps.

TOTAL RS.

1 Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 2 Pair (4 core) Metre 22502 Providing, laying connecting and testing of multi-core telephone armoured cable of

conductor size 0.6 mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable as required

SUB HEAD-VII : T.V. & TELEPHONE SYSTEM & CONDUITING FOR LAN SYSTEM

filled (as per DOT specification) cable as required

a) 50 Pair telephone cable Metre 100b) 20 Pair telephone cable Metre 1503 Providing, fixing connecting and testing of under noted size of solderless telephone tag

block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted.

a) 50 pair tag block Each 1b) 20 pair tag block Each 34 Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

a) 20mm dia conduit pipe Metre 800



b) 25mm dia conduit pipe Metre 300c) 32mm dia conduit pipe Metre 200c) 32mm dia conduit pipe Metre 2005 Providing, laying and fixing 80 dia G.I. pipe (medium class) in ground complete with G.I.

fittings including trenching (75 cm deep)and re-filling etc as requiredMetre 50

6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

7 Supplying and fixing M.S. box with modular type telephone (RJ-11) outlet complete as required.

Each 45

8 Supplying and fixing M.S. box with modular type coaxial outlet for TV antenna complete as required.

Each 2

9 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE Metre 609 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Metre 60

10 Supplying and fixing M.S. box with Phenolic laminate plate 4- way splitter box for TV antenna complete as required.

Each 1

11 Supplying and fixing of 450 x 450 x 150 M.S. box with Phenolic laminate plate of 16 SWG M.S. Sheet with hinged door cover for mounting TV amplifier including wooden base plate complete as required.

Each 1

12 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.

a Supply and fixing of 75mm x 75mm x 60mm deep metal box on surface or in recess for RJ- Each 5045 outlets

TOTAL RS.

1 Supply, installation, testing and commissioning of microprocessor based UL listed compliant analog addressable intelligent fire alarm control panel (2) loop complete with central processing unit. Network communication card RS-485 port, 640 Characters LCD display with primary power supply at 230V with 24/36 volts. Sealed maintenance free (SMF) batteries backup (as per IS) complete with solid state boost/trickle automatic battery charger. The panel shall support Graphics package for central monitoring of all field devices.

Set 1

SUB-HEAD -VIII : FIRE DETECTION SYSTEM



2 Supply, installation, testing and commissioning of UL listed integral microprocessor (not Each 802 Supply, installation, testing and commissioning of UL listed integral microprocessor (not micro-controller) intelligent multi cooperative type addressable photoelectric or multi cooperative type optical smoke detectors based with moisture free & rust free in base complete as per specifications as required.

Each 80

3 Supply, installation, testing and commissioning of UL listed integral microprocessor (not micro-controller) intelligent addressable type heat detector (combined rate of rise and fixed temperature) consists of two independent thermistors, designed to automatically compensate changes in ambient temperature with moisture free & rust free terminals in base complete as per specifications as required.

Each 4

4 Supply, installation, testing and commissioning of UL listed integral microprocessor (not micro-controller) intelligent addressable ductable photoelectric or optical smoke detectors based with moisture free & rust free in base enclosed in air sample box complete as per

Each 5

based with moisture free & rust free in base enclosed in air sample box complete as per specifications as required.

5 Supply, installation, testing and commissioning of addressable type manual call point, 1 stage with in-builtLED, lighting up automatically to confirm its actuation complete as per specification as required.

Each 3

6 Supply, installation, testing and commissioning of UL listed wall mounted hooter with strobe (100 dba) complete as per specification as required.

Each 3

7 Supply, installation, testing and commissioning of addressable input/output/control module for shutting down

Each 5

AHU's, lift pressurization fans and ventilation fans etc. including power supply for driving the control module as per requirement.

8 Supplying, laying, testing and commissioning of point wiring for following sensors and devices with 2 x 1.5 sq.mm FRLS PVC insulated multi-stranded single core copper conductor wire in M.S. conduit with conduit accessories including loop circuit from main fire alarm panel located at ground floor in fire control room complete as required.

RM 1380

a) Wiring for smoke/ heat detectorsb) Wiring for Input/Output modules.c) Wiring for manual call point.



9 Supplying, laying, testing and commissioning of point wiring for hooters with strobe circuits with 2 pair 1.5 sq.mm copper conductor flexible wire (1 pair shielded and 1 pair unshielded) including loop wiring from MFCP in M.S. conduit with conduit accessories complete as required.

RM 150

TOTAL RS.

1 Supply, installation, testing and commissioning of the following components as required.a. 4-pair, Cat6 UTP Cable, roll of 305m, 200 MHz, Blue Color (For Data) Box 10b. 24-port unloaded Modular Jack Panel (for UTP Jacks only), 1U (For Data utp Field Cable) Nos 3

c. Cat 6 Patch Cords - 7 Feet-Blue ( Data Work Station end) Nos 50d. Cat 6 Patch Cords - 4 Feet-Blue( Data Rack end) Nos 50

SUB-HEAD -IX : LAN SYSTEM

d. Cat 6 Patch Cords - 4 Feet-Blue( Data Rack end) Nos 50e. 1-port British-style shuttered faceplate Nos 50f. Cat 6 UTP RJ-45 Jack with Strain relief and bend limiting boot Blue (For Data Rack &

Workstation )Nos 100

g. 6-core Outside Plant Cable - Corrugated Steel tape Armored, Loose-tube, Gel-filled, 62.5/125 micron OM3 MM

metre 50

h. ST-Style Connectors, Multimode, Simplex - new part # Nos. 6i. ST-ST Style Multimode 62.5/125 micron Duplex Patch Cord, 3 Meter Nos. 6j. 12-fiber ST-Style, Multimode, 19-inch Rack mount Patch Panel, 1U, Loaded with adapter

PlatesNos. 1

k. 24-fiber SC-Style, Multimode, 19-inch Rack mount Patch Panel, 1U, Loaded with adapter Plates

Nos. 0

l. Cat 6 24-port loaded, 110 Connect Jack Panel, 1U (For Data UTP Cables) Closed rack Nos. 1m. Cat 6 Patch Cords - 7 Feet-Yellow Nos. 10m. Cat 6 Patch Cords - 7 Feet-Yellow Nos. 10n. Horizontal PVC cable manger Nos. 1

o. 6 U Wall Mount Rack Nos. 3p. Hardware Pkt Nos. 1q. Earthing Kit Nos. 2r. AC Distribution Box (6 Points - 5A Sockets ) - IU Nos. 3s. 19-inch open rack (45 U Size) Nos. 1t. Vertical Wire Manager(double sided) (100x100mm) Nos. 1u. Ladder with accessories Nos. 1

TOTAL RS.



1 Supply, Installation, testing & commissioning of 1x 20 KVA UPS system configuration with 3Phase Input and 3 Phase Output True On Line Double Conversion UPS including Battery Circuit Breaker for Each Module CRCA housing with all required fixing accessories and hardware, with Galvanic Isolation Transformer, Inbuilt Static switch bypass

Set 1SUB HEAD-X: UPS SYSTEM

accessories and hardware, with Galvanic Isolation Transformer, Inbuilt Static switch bypass and inverter in each UPS module, In-Built Manual Maintenance by-pass, Sealed Maintenance free batteries for 15 Min back up, Battery Racks MS Powder Coated etc complete as required.

TOTAL RS.

1 Design, supply at site, installation, testing & commissioning of 3-phase, 415 volt, ON- GRID solar power plant synchronized with transformer supply including all accessories, inverter, solar panels, all cabling, certifications, liaison with authorities for subsidy, for the following KVA ratings complete as required.

A. 3 KVA Set. 1

SUB HEAD-XI: SOLAR POWER PANELS

A. 3 KVA Set. 1TOTAL RS.

S.NO. SUB-HEAD DESCRIPTIONIn Words(Rs.) In Figure(Rupees)

1 SUBHEAD- I D.G. SETS RS.

2 SUBHEAD- II SUB-STATION EQUIPMENTS RS.

3 SUBHEAD- III MV CABLES RS.

4 SUBHEAD- IV EXTERNAL LIGHTING RS.

TOTAL RS.

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING OF ELECTRICAL WORKS FOR PROPOSED USIC SUMMARY OF COST – EXTERNAL ELECTRICAL WORKS

AMOUNT (RS.)

GRAND TOTAL

USIC AT ALLAHABAD 1 Electrical works

S.NO DESCRIPTION OF ITEM UNIT QTY.Amount

In figures (Rs.) In Words (Rs.) In figures (Rs.)

SUB HEAD-I: D.G. SETS

SCHEDULE OF QUATITIES FOR EXTERNAL ELECTRIFICATION WORKSQuoted

Unit Rate

1 Supply, installation, testing & commissioning of 3-phase, 415 volt, 1500 RPM, 50 HZ, Diesel generator set of 500 KVA at 0.8 pf lagging diesel engine alternator set mounted on common base frame in outdoor type acoustic enclosure , day tank capacity of 990 litres,m with AMF Panel, switch gear of required capacity , battery, batter charger, return fuel cooler, anti vibration mounting pads including residential silencer, engine alternator, pcc based auto start & synchronization set, safeties with accessories, all control cabling as per specification complete as required. Diesel engine shall conform to IS:10000 and alternator shall be self excited complete with AVR to IS:4722.

Set. 1



QuotedUnit Rate

2 Supplying and fixing of undernoted 'B' class MS pipe for DG exhaust complete with bends, elbow, flanges etc. as required.

a 250 mm dia pipe Metre 50a 250 mm dia pipe Metre 50

3 Supply and fixing of 50mm thick compressed mineral wool insulation (Rock wool) for D.G. exhaust pipe with 22 gauge aluminium sheet cladding etc. as required for the under mentioned dia pipe.

a 250 mm dia pipe Metre 50

4 Fabrication of supports for exhaust pipe, fuel pipe or for any other purpose out of M.S. structural steel including supplying and applying of enamel paint of approved shade after one coat of steel primer of reputed company.

Kg. 2500

TOTAL RS.TOTAL RS.



QuotedUnit Rate

SUB HEAD-II: SUB-STATION EQUIPMENTS

TRANSFORMER5 Supply, installation, testing and commissioning of 500 KVA copper

wound 11/0.433 KV, 50 C/S, Delta star connected oil cooled outdoor type Set. 1

wound 11/0.433 KV, 50 C/S, Delta star connected oil cooled outdoor type transformer with ON load circuit tap changer unit range, minus 10% to plus 5% on HT side in steps of 2.5% complete with complete accessories as per specifications as required.

HT PANEL BOARD6 HT panel board suitable for outdoor installation for use on 11 KV 50 C/S

earthed system having a symmetrical breaking capacity of 350MVA for 1 Sec. at 11 KV comprising triple pole VCB. Panel shall be equipped with following accessories as per specifications and schematic drawing.

Set 1



QuotedUnit Rate

Panel shall be comprising of:

7 1- Metal Clad housing with track having 630A TP integral VCB with Electric operated draw out type mechanism (spring charged motor - 230 VAC).VAC).1- Set of air insulated copper bus bar & chamber.1- Set of isolating plug and receptacle.1- Set of Automatic safety shutter.1- Set of breaker control switch (TNC)2- Sets of CT'sCT- I -100/5A class 5P-10(15 VA)CT- II – 100/5A class -1(15 VA)1 - Digital Ammeter, selector switch. (Built-in)3 - Nos. PT's 11KV /Rt.3 /110V/Rt 3 of (100 VA) cast resin type.1 - H.T. Cable box for 3C x 120 sq.mm aluminium conductor XLPE cable (11 KV earthed system).1 - No. Tripping coil & closing Coil 24V DC/110V A.C.1 - Set of ON/OFF/Trip & circuit healthy and phase indicating lights.1- 3 element O/C, EF & SC relay (IDMTL & Hi - set) with required 1- 3 element O/C, EF & SC relay (IDMTL & Hi - set) with required setting.1- set Auxiliary relay.1- Master trip relay1-set Trip circuit supervision1-Restricted Earth fault relay

230 V, single phase, 2 wire, A.C. to 24V D.C. 180 AH sealed maintenance free batteries with semiconductor/ IGBT (half wave rectifier) with auto-manual trickle boost facility battery charging units complete



QuotedUnit Rate

8 Supplying, installation, testing and commissioning of outdoor L.T. Cubicle fully compartmentalized cubical type sheet clad floor mounted totally enclosed , extensible on both sides, switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having 50KA fault capacity, 415 Volts 3-phase, 4 wire, 50 Hz system having 50KA fault capacity, housed with incoming and outgoing, interconnection etc. with indication lamps, accessories etc, as required as per specification and schematic diagram as required.

1 No. 800A 4P MCCB(50 KA) with electronic releases1 No.Volt Meter (digital type) with inbuilt VSS & control fuses.1 No.P.F. Meter (digital type)1 No.KWH meter (digital type)1 Set of phase indication lights R,Y,B. Set 1

9 Supplying and fixing of non-skid rubber mat 16mm thick and 900mm width as required including cutting to required lengths of approved make

Metre 5

with Test Certificates for L.T. panels.

10 Supplying and fixing of fire bucket painted red and duly filled with sand conforming to IS: 2546-1974.

Each 12

11 Supplying and fixing of MS stand suitable for supporting two buckets (Pedestal type)

Each 2

12 Supplying and fixing of MS stand suitable for supporting four buckets (Pedestal type)

Each 2



QuotedUnit Rate

13 Supplying and fixing of shock restoration chart written in English and Hindi duly framed in as required.

Each 2

14 Supplying and fixing of carbon dioxide fire extinguisher type 4 kgs. Capacity of approved make with wall mounting bracket as required

Each 4Capacity of approved make with wall mounting bracket as required conforming to IS: 2878/1976 (Push type).

15 Supplying and fixing of first aid box as approved complete with standard kit as prescribed by Indian Red Cross.

Each 1

16 Supply and fixing of H.T. Danger notice plate of 250x200mm made of mild steel at least 2mm thick and vitreous enameled white on both side with inscription in signal red colour on front side as required.

Each 6

TOTAL RS.

SUB HEAD-III : MV CABLES

17 Supplying, laying, of following sizes XLPE, 11 KV earthed cable in existing open structure/ hume pipe including in vertical formation as per technical specification and complete as required. (The payments of cable length shall only be made upto gland in panel on both sides not for loop and connection cables of approximate length upto 2 metres either sides.)

a. 3Cx120 Sq.mm. Metre 100



QuotedUnit Rate

18 Supplying and making indoor cable end termination with cast resin compound, including lugs and other jointing materials complete with all accessories for following sizes of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.

a. 3Cx120 Sq.mm. set 2

19 Supplying and making outdoor cable end termination with cast resin compound, including lugs and other jointing materials complete with all accessories for following sizes of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.

a. 3Cx120 Sq.mm. set 2

TOTAL RS.

SUB HEAD-IV : EXTERNAL LIGHTINGSUB HEAD-IV : EXTERNAL LIGHTING

20 Supplying, installation, testing and commissioning of L.T. panel fully compartmentalized cubical type sheet clad floor mounted totally enclosed , extensible on both sides, switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having required fault capacity, housed with incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm, interconnection etc. with indication lamps, accessories etc, as required as per specification and schematic diagram as required. (Street lighting Panel)



QuotedUnit Rate

INCOMER:-1 Nos.100/63 Amps. TPN MCCB(25 KA) with electronic releases.1 Set phase indication lights (R, Y, B)1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.1 No. 0-200 Amp. Ammeter (digital type) with inbuilt ASS 1 No. 0-200 Amp. Ammeter (digital type) with inbuilt ASS BUS BARS:-200 Amps. TP&N Aluminium bus bars (25 KA)OUT GOINGS:-4 Nos. 40 A TPN, MCB (10KA).2 Nos. 24 Hr Timer Switch2 Nos. 40A TPN contactor Set 1

21 Supply, fixing, testing & commissioning of the bollard Lighting Fixture equivalent to Philips Cat. No. BGP 150 Bollard including 1 no. 24 watt LED lamp of approved shade along with ignitor, necessary brackets, including connections as required.

Each 6

22 Supply, fixing, testing & commissioning of the Gate Lighting Fixture Each 222 Supply, fixing, testing & commissioning of the Gate Lighting Fixture equivalent to Philips Cat. No. metronomis including 1 no. 150 watt MH lamp along with ignitor, necessary brackets, including connections as required.

Each 2

23 Supply, fixing, testing & commissioning of the bollard Lighting Fixture equivalent to Philips Cat. No. BCP 151 Bollard including 1 no. 8 watt LED lamp of approved shade along with ignitor, necessary brackets, including connections as required.

Each 10

TOTAL RS.

DESCRIPTION OF ITEM UNIT QTY.Amount

In figures In Words (Rs.) In figures (Rs.)1. Packaged Unit Airconditioners

Supply, installation, testing and commissioning of aircooledpackaged airconditioner complete with hermatically sealedscroll compressors with motors, aircooled condenser, DXcoil, filter, canvass connection blower section with blower,motor and drive, integral refrigerant piping, initial charge ofrefrigerant gas and oil, Hi-Low pressure cutout andthermostatic control. All the items shall be enclosed in anattractive sheet metal cabinet duly insulated. Each unitshall have own microprocessor based control panel. Thecapacity of each unit shall be as follows. Condensing untshall be mouned on M.S. structure as per standards,specifications & drawings.

1.1 16.5 Tons Nos. 4

S.NO QuotedUnit Rate

SCHEDULE OF QUANTITIES FOR HVAC WORK

Page 1


In figures In Words (Rs.) In figures (Rs.)



2. Split Unit Airconditioners

2.1 Ductable Split Unit

Providing, fixing, testing and commissioning of doublesikn ductable type split unit aircondi-tioners with evaporatorwith coil, fan and fan motor, aircooled condenser withhermatically sealed scroll compressor condenser coilpropeller fans controls, canvass connection, control panelwith cabling, earthing, corded remote, HDPE filters, M.S.frame of angle iron for mounting condensing unit completeas per standards and drawings.

2.1.1 16.5 Tons Nos. 3

2.1.2 11.0 Tons No. 1

2.1.3 5.5 Tons No. 1

3. Inline Fans

Providing, fixing, testing and commissioning of inline fansof G.I. construction, complete with centrifugal fan withmotor, canvass connection at inlet & outlet complete withMCB & relays, cabling & earthing (with 5 Rm). completeas per standards and drawings.

3.1 450 cfm, 10 mmwg static pressure. No. 3

Page 2





Page 3





4. Drain Piping

Providing and fixing of the UPVC pipes for condensatedrain cut to required lengths and installed with allaccessories, u-trap, joints duly insulated with 6 mm thicknitrile rubber and finished complete as per standards anddrawings.

4.1 40 mm dia Rm 60

4.2 32 mm dia Rm 80

5. Ducting Providing and fixing of G.I. sheet metal ducting to befabricated at site complete with fittings such as bends,chutes, as required complete with gaskets, vanes supportscomplete as per standards and drawings.

5.1 G.I. Sheet Metal Ducting (Rectangular)

5.1.1 0.63 mm (24 Gauge) (0 - 750 mm) Sqm 410

5.1.2 0.80 mm (22 Gauge) (751 - 1500 mm) Sqm 480

5.1.3 1.00 mm (20 Gauge) (1501- 2250 mm) Sqm 25

Page 4





6. Insulation Providing and fixing of closed cell nitrile insulation onducts, joints shall be seal with self adhesive tape ofapproved make complete as per standards and drawings.

6.1 9 mm thick Sqm 700

7. Duct Acoustic Lining Providing and fixing of acoustic lining with 25mm thickresin bonded fibre glass slab of 32 Kg/m3 and same shallbe covered with 26 Ga performated aluminium sheet withaccessories complete as per standards and drawings.

7.1 25 mm thick, 32 kg/m3 Sqm 180

8. Grills/Diffusers

Providing and fixing of aluminium powder coated supplyand return air grilles / diffusers with extruded aluminiumdampers (linear or square) complete as per standards anddrawings.

8.1 Aluminium supply grill with damper. Sqm 5.0

8.2 Aluminium return grill without damper. Sqm 3.0

8.3 Aluminium supply / exhaust diffuser with damper Sqm 20.0

8.4 Aluminium return diffuser without damper Sqm 18.0

Page 5





9. Volume Control Damper

Providing and fixing of box type 18 Ga G.I. Volume control damper in ducts complete with nuts, bolts, screws,linkages, duct levers and quadrents for proper balancing ofair distributionas complete as per standards and drawings.

Sqm 3.5

10. Fresh / Exhaust Air Grill with Louvers Supply and fixing of aluminium powder coated fresh airgrill with bird screen complete as per standards anddrawings.

Sqm 2.5

11. Electric Panel Board

11.1 Providing, fixing, testing and commissioning weatherproof main panel board cubical compartmentalised,floor mounted made of 2.0 mm thick steel sheet dulypainted complete with voltmeter, ammeter, indicatinglights for selector switch, incoming/outgoing feedersCTS contactors for complete as per standards anddrawings.

Set 1

1 No. 200 Amps TPN MCCB incoming.

1 set 250 Amps TPN aluminium conductor bus bar dulysleeved.

4 Nos. 63 Amps MCCB outgoing for 4 Nos. packaged unit.

Page 6





12. Power Cabling Providing and fixing PVC sheathed armoured Aluminiumcables for various equipments through walls/ceiling withappropriate clamps & fixing arrangement complete as perstandards and drawings.

12.1 3 C - 16 sqmm Rm 30

13. Refrigerant Piping

Supply, installation, testing and commissioning of suction& discharge of refrigerant along with 9 mm thick nitrilerubber insulation.

13.1 16.5 TR Packaged Unit Rm 128

13.2 16.5 TR Ductable Unit Rm 164



Total Rs.

Page 7



TOTAL Rs.

SCHEDULE OF QUANTITIES FOR LIFT WORK.

QuotedUnit Rate

1 Providing, errection,testing and commissioing of Tractionpassenger Elevator for 13 persons 884 Kgs with speed @ 1.0MPS ground to 2nd floor for about 12 metres height in threestops / 3 openings (all opening on the same side) with 400/415volts 3 phase 50 HERTZ Alternating current AC variablevoltage frequency (with close loop) simplex full collective(with/without attendant) geared placed directly above hoist waycar size 2000x wide x 1100 deep x 2500 high hoist required2500 mm wide x 1800(APP.) deep-finished dimensions with4500 mm over head, car enclosure. Front return panels SShairline, Rear and side panels and flooring in Vinyl tiles , falseceiling CD -41,Stainless steel Handrails on rear car panels, Carentrance protected by centre opening sliding steel door instainless steel hairline finish size 900 wide x 2000 mm high,hoist way entrances protected by centre opening sliding steeldoor in stainless steel hairline finish automatic with DC dooroperator, protected by multiray electronic door protectiondevice, signed designs GIEN with combined.Dot matrix(REDLED) Scrolling Display car position indicator ,Hall Button withHPI,1 hour fire rated door, Anti-nuisance Car Call Protection,Independent Service , Overload Device, Nudging, EmergencyFiremen’s Service, Emergency Car Light Unit, Infrared CurtainDoor Protection, Door Time Protection, Emergency AlarmButton, Extra Door Time of Lobby & Parking, DoorOpen/Close Button, AUTO Rescue Device operation, BeltInspection Drive, Auto Fan Cut Off as per technicalspecifications.

NO 1


In figures (Rs.)

In Words (Rs.) In figures (Rs.)

1 Supplying ,installation,testing and commissioning of Eot crane 8 tone capacity x 9.11 mtr span single grider as per technical specifications and instructions of engineer incharge.

1 nosTOTAL Rs.

SCHEDULE OF QUANTITIES FOR EOT CRANE WORK

QuotedUnit Rate

Documents

PART 2 FINANCIAL BID SCHEDULE (BILL) OF QUANTITIES BID USIC... · schedule (bill) of quantities (item rate tender) abstract of cost schedule description total quoted amount in figures