NSAI - Standards Publications NSAI WEB Report Date of ... · I.S. EN 1069-2:2017 Water slides - Part 2: Instructions CEN 8/27/2017 I.S. EN 1090-5:2017 Execution of steel structures

Reference Title En Origin Body Publication D..

I.S. CEN/TR 16791:2017Quantifying irradiance for eye-mediated non-image-forming effects of light inhumans CEN 9/10/2017

I.S. CEN/TS 12697-52:2017Bituminous mixtures - Test methods - Part 52: Conditioning to address oxidativeageing CEN 8/13/2017

I.S. CEN/TS 17021:2017Stationary source emissions - Determination of the mass concentration ofsulphur dioxide by instrumental techniques CEN 1/30/2017

I.S. CEN/TS 17083:2017Foodstuffs - Determination of acrylamide in food and coffee by gaschromatography-mass spectrometry (GC-MS) CEN 6/25/2017

I.S. CLC/TR 50670:2016External fire exposure to roofs in combination with photovoltaic (PV) arrays -Test method(s) CENELEC 1/23/2017

I.S. EN 54-5:2017Fire detection and fire alarm systems - Part 5: Heat detectors - Point heatdetectors CEN 2/20/2017

I.S. EN 54-13:2017Fire detection and fire alarm systems - Part 13: Compatibility and connectabilityassessment of system components CEN 3/6/2017

I.S. EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements CEN 8/27/2017

I.S. EN 71-7:2014+A1:2017 Safety of toys - Part 7: Finger paints - Requirements and test methods CEN 10/15/2017

I.S. EN 71-12:2016 Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances CEN 1/16/2017

I.S. EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use CEN 9/10/2017

I.S. EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation CEN 8/6/2017

I.S. EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking CEN 1/30/2017

I.S. EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity CEN 1/6/2017

I.S. EN 207:2017Personal eye-protection equipment - Filters and eye-protectors against laserradiation (laser eye-protectors) CEN 3/24/2017

I.S. EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods CEN 6/18/2017

I.S. EN 301:2017Adhesives, phenolic and aminoplastic, for load-bearing timber structures -Classification and performance requirements CEN 11/29/2017

I.S. EN 302-2:2017Adhesives for load-bearing timber structures - Test methods - Part 2:Determination of resistance to delamination CEN 9/24/2017

I.S. EN 302-3:2017Adhesives for load-bearing timber structures - Test methods - Part 3:Determination of the effect of acid damage to wood fibres by temperature andhumidity cycling on the transverse tensile strength

CEN 9/24/2017

I.S. EN 302-8:2017Adhesives for load-bearing timber structures - Test methods - Part 8: Static loadtest of multiple bond line specimens in compression shear CEN 2/12/2017

I.S. EN 303-1:2017Heating boilers - Part 1: Heating boilers with forced draught burners -Terminology, general requirements, testing and marking CEN 9/24/2017

I.S. EN 303-2:2017Heating boilers - Part 2: Heating boilers with forced draught burners - Specialrequirements for boilers with atomizing oil burners CEN 9/4/2017

I.S. EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners CEN 11/29/2017

I.S. EN 342:2017 Protective clothing - Ensembles and garments for protection against cold CEN 12/3/2017

I.S. EN 451-1:2017 Method of testing fly ash - Part 1: Determination of free calcium oxide content CEN 5/21/2017

I.S. EN 451-2:2017 Method of testing fly ash - Part 2: Determination of fineness by wet sieving CEN 5/21/2017

I.S. EN 490:2011+A1:2017Concrete roofing tiles and fittings for roof covering and wall cladding - Productspecifications CEN 1/30/2017

I.S. EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations CEN 3/26/2017

I.S. EN 558:2017Industrial valves - Face-to-face and centre-to-face dimensions of metal valvesfor use in flanged pipe systems - PN and Class designated valves CEN 3/6/2017

I.S. EN 565:2017 Mountaineering equipment - Tape - Safety requirements and test methods CEN 8/27/2017

I.S. EN 566:2017 Mountaineering equipment - Slings - Safety requirements and test methods CEN 4/2/2017

I.S. EN 581-1:2017Outdoor furniture - Seating and tables for camping, domestic and contract use -Part 1: General safety requirements CEN 3/26/2017

I.S. EN 581-3:2017Outdoor furniture - Seating and tables for camping, domestic and contract use -Part 3: Mechanical safety requirements for tables CEN 2/5/2017

I.S. EN 590:2013+A1:2017 Automotive fuels - Diesel - Requirements and test methods CEN 8/16/2017

NSAI - Standards Publications NSAI WEB Report Date of Publication :All

Number of Records found :1,791

Reference Title En Origin Body Publication D..I.S. EN 581-3:2017Outdoor furniture - Seating and tables for camping, domestic and contract use -Part 3: Mechanical safety requirements for tables CEN 2/5/2017

I.S. EN 590:2013+A1:2017 Automotive fuels - Diesel - Requirements and test methods CEN 8/16/2017

I.S. EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes CEN 11/13/2017

I.S. EN 609-1:2017Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedgesplitters CEN 1/30/2017

I.S. EN 716-1:2017Furniture - Children's cots and folding cots for domestic use - Part 1: Safetyrequirements CEN 6/25/2017

I.S. EN 716-2:2017Furniture - Children's cots and folding cots for domestic use - Part 2: Testmethods CEN 6/25/2017

I.S. EN 752:2017 Drain and sewer systems outside buildings - Sewer system management CEN 5/14/2017

I.S. EN 772-5:2016/AC:2017Methods of test for masonry units - Part 5: Determination of the active solublesalts content of clay masonry units CEN 4/9/2017

I.S. EN 816:2017 Sanitary tapware - Automatic shut-off valves PN 10 CEN 9/4/2017

I.S. EN 847-1:2017Tools for woodworking - Safety requirements - Part 1: Milling tools, circular sawblades CEN 11/29/2017

I.S. EN 847-2:2017Tools for woodworking - Safety requirements - Part 2: Requirements for theshank of shank mounted milling tools/circular saw blades CEN 11/29/2017

I.S. EN 868-2:2017Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap -Requirements and test methods CEN 2/27/2017

I.S. EN 868-3:2017Packaging for terminally sterilized medical devices - Part 3: Paper for use in themanufacture of paper bags (specified in EN 868-4) and in the manufacture ofpouches and reels (specified in EN 868-5) - Requirements and test methods

CEN 2/27/2017

I.S. EN 868-4:2017Packaging for terminally sterilized medical devices - Part 4: Paper bags -Requirements and test methods CEN 2/27/2017

I.S. EN 868-6:2017Packaging for terminally sterilized medical devices - Part 6: Paper for lowtemperature sterilization processes - Requirements and test methods CEN 2/27/2017

I.S. EN 868-7:2017Packaging for terminally sterilized medical devices - Part 7: Adhesive coatedpaper for low temperature sterilization processes - Requirements and testmethods

CEN 2/27/2017

I.S. EN 958:2017Mountaineering equipment - Energy absorbing systems for use in klettersteig(via ferrata) climbing - Safety requirements and test methods CEN 4/2/2017

I.S. EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar CEN 4/23/2017

I.S. EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar CEN 4/23/2017

I.S. EN 1017:2014+A1:2017Chemicals used for treatment of water intended for human consumption -Half-burnt dolomite CEN 7/9/2017

I.S. EN 1052-2:2016/AC:2017 Methods of test for masonry - Part 2: Determination of flexural strength CEN 4/9/2017

I.S. EN 1069-1:2017 Water slides - Part 1: Safety requirements and test methods CEN 9/4/2017

I.S. EN 1069-2:2017 Water slides - Part 2: Instructions CEN 8/27/2017

I.S. EN 1090-5:2017Execution of steel structures and aluminium structures - Part 5: Technicalrequirements for cold-formed structural aluminium elements and cold-formedstructures for roof, ceiling, floor and wall applications

CEN 4/9/2017

I.S. EN 1111:2017Sanitary tapware - Thermostatic mixing valves (PN 10) - General technicalspecification CEN 8/27/2017

I.S. EN 1176-1:2017Playground equipment and surfacing - Part 1: General safety requirements andtest methods CEN 11/5/2017

I.S. EN 1176-2:2017Playground equipment and surfacing - Part 2: Additional specific safetyrequirements and test methods for swings CEN 11/5/2017

I.S. EN 1176-3:2017Playground equipment and surfacing - Part 3: Additional specific safetyrequirements and test methods for slides CEN 11/5/2017

I.S. EN 1176-4:2017Playground equipment and surfacing - Part 4: Additional specific safetyrequirements and test methods for cableways CEN 11/5/2017

I.S. EN 1176-6:2017Playground equipment and surfacing - Part 6: Additional specific safetyrequirements and test methods for rocking equipment CEN 11/5/2017

I.S. EN 1253-5:2017 Gullies for buildings - Part 5: Gullies with light liquids closure CEN 2/27/2017

I.S. EN 1272:2017Child care articles - Table mounted chairs - Safety requirements and testmethods CEN 6/11/2017

I.S. EN 1287:2017Sanitary tapware - Low pressure thermostatic mixing valves - General technicalspecification CEN 9/4/2017

I.S. EN 1330-9:2017Non-destructive testing - Terminology - Part 9: Terms used in acoustic emissiontesting CEN 8/13/2017

I.S. EN 1359:2017 Gas meters - Diaphragm gas meters CEN 8/13/2017



Reference Title En Origin Body Publication D..I.S. EN 1330-9:2017Non-destructive testing - Terminology - Part 9: Terms used in acoustic emissiontesting CEN 8/13/2017

I.S. EN 1359:2017 Gas meters - Diaphragm gas meters CEN 8/13/2017

I.S. EN 1364-5:2017 Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles CEN 7/16/2017

I.S. EN 1366-10:2011+A1:2017 Fire resistance tests for service installations - Part 10: Smoke control dampers CEN 4/23/2017

I.S. EN 1384:2017 Helmets for equestrian activities CEN 7/2/2017

I.S. EN 1406:2017Chemicals used for treatment of water intended for human consumption -Modified starches CEN 11/26/2017

I.S. EN 1439:2017LPG equipment and accessories - Procedure for checking transportable refillableLPG cylinders before, during and after filling CEN 7/9/2017

I.S. EN 1442:2017LPG equipment and accessories - Transportable refillable welded steel cylindersfor LPG - Design and construction CEN 5/28/2017

I.S. EN 1451-1:2017Plastics piping systems for soil and waste discharge (low and high temperature)within the building structure - Polypropylene (PP) - Part 1: Specifications forpipes, fittings and the system

CEN 12/3/2017

I.S. EN 1453-1:2017Plastics piping systems with structured-wall pipes for soil and waste discharge(low and high temperature) inside buildings - Unplasticized poly(vinyl chloride)(PVC-U) - Part 1: Specifications for pipes and the system

CEN 1/30/2017

I.S. EN 1453-1:2017/AC:2017Plastics piping systems with structured-wall pipes for soil and waste discharge(low and high temperature) inside buildings - Unplasticized poly(vinyl chloride)(PVC-U) - Part 1: Specifications for pipes and the system

CEN 7/23/2017

I.S. EN 1459-1:2017Rough-terrain trucks - Safety requirements and verification - Part 1:Variable-reach trucks CEN 10/1/2017

I.S. EN 1496:2017 Personal fall protection equipment - Rescue lifting devices CEN 1/30/2017

I.S. EN 1504-10:2017Products and systems for the protection and repair of concrete structures -Definitions, requirements, quality control and evaluation of conformity - Part 10:Site application of products and systems and quality control of the works

CEN 10/29/2017

I.S. EN 1559-5:2017Founding - Technical conditions of delivery - Part 5: Additional requirements formagnesium alloy castings CEN 3/24/2017

I.S. EN 1601:2017Liquid petroleum products - Determination of organic oxygenate compoundsand total organically bound oxygen content in unleaded petrol - Method by gaschromatography (O-FID)

CEN 8/27/2017

I.S. EN 1762:2017Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid orgaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification CEN 3/24/2017

I.S. EN 1766:2017Products and systems for the protection and repair of concrete structures - Testmethods - Reference concretes for testing CEN 2/27/2017

I.S. EN 1793-1:2017Road traffic noise reducing devices - Test method for determining the acousticperformance - Part 1: Intrinsic characteristics of sound absorption under diffusesound field conditions

CEN 4/16/2017

I.S. EN 1839:2017Determination of the explosion limits and the limiting oxygenconcentration(LOC) for flammable gases and vapours CEN 1/30/2017

I.S. EN 1853:2017 Agricultural machinery - Trailers - Safety CEN 11/5/2017

I.S. EN 1860-1:2013+A1:2017Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecuesburning solid fuels - Requirements and test methods CEN 7/16/2017

I.S. EN 1860-1:2013+A1:2017/AC:2017Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecuesburning solid fuels - Requirements and test methods CEN 12/31/2017

I.S. EN 1870-6:2017Safety of woodworking machines - Circular sawing machines - Part 6: Circularsawing machines for fire wood CEN 11/29/2017

I.S. EN 1907:2017Safety requirements for cableway installations designed to carry persons -Terminology CEN 12/10/2017

I.S. EN 1909:2017Safety requirements for cableway installations designed to carry persons -Recovery and evacuation CEN 4/2/2017

I.S. EN 1982:2017 Copper and copper alloys - Ingots and castings CEN 9/24/2017

I.S. EN 1993-1-5:2006/A1:2017 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements CEN 12/19/2017

I.S. EN 1993-1-6:2007/A1:2017Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of ShellStructures CEN 12/19/2017

I.S. EN 1993-4-1:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos CEN 12/19/2017

I.S. EN 1993-4-2:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-2: Tanks CEN 12/19/2017

I.S. EN 2004-7:2017Aerospace series - Test methods for aluminium and aluminium alloy products -Part 7: Reference blocks for the calibration of measuring equipment used in thedetermination of electrical conductivity of wrought aluminium and aluminium al..

CEN 8/20/2017

I.S. EN 2033:2017Aerospace series - Strips, cold rolled in steel, Thickness 0,1 mm â‰ ¤ a â‰ ¤2,5 mm - Dimensions CEN 3/26/2017

I.S. EN 2034:2017Aerospace series - Round steel bars drawn and/or descaled - Dimensions -Tolerance h 11 CEN 8/20/2017

I.S. EN 2036:2017 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CEN 8/20/2017



Reference Title En Origin Body Publication D..I.S. EN 2034:2017Aerospace series - Round steel bars drawn and/or descaled - Dimensions -Tolerance h 11 CEN 8/20/2017

I.S. EN 2036:2017Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 8/20/2017

I.S. EN 2037:2017Aerospace series - Hexagonal steel bars drawn - Dimensions - Tolerances h 11and h 12 CEN 11/13/2017

I.S. EN 2040:2017 Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16 CEN 8/20/2017

I.S. EN 2053:2017 Aerospace series - U-section aluminium alloy folded profiles - Dimensions CEN 8/20/2017

I.S. EN 2119:2017Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) -Solution treated and precipitation treated - Wires for rivets - 2 mm â‰ ¤ Dâ‰ ¤ 10 mm - Rm â‰ ¥ 960 MPa

CEN 12/31/2017

I.S. EN 2135:2017Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar -De â‰ ¤ 40 mm CEN 12/31/2017

I.S. EN 2137:2017Aerospace series - Steel FE-PL75 - 1 100 MPa â‰ ¤ Rm â‰ ¤ 1 250 MPa - Bars- De â‰ ¤ 100 mm CEN 12/31/2017

I.S. EN 2174:2017Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) -Solution treated and precipitation treated - Forgings - De â‰ ¤ 100 mm - Rmâ‰ ¥ 850 MPa

CEN 12/31/2017

I.S. EN 2221:2017Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5mm â‰ ¤ a â‰ ¤ 55 mm CEN 12/31/2017

I.S. EN 2222:2017Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and dieforgings CEN 12/31/2017

I.S. EN 2267-009:2017Aerospace series - Cables, electrical, for general purpose - Operatingtemperatures between -55 Â°C and 260 Â°C - Part 009: DRA family, single andmulticore assembly - Product standard

CEN 8/27/2017

I.S. EN 2267-010:2017Aerospace series - Cables, electrical, for general purpose - Operatingtemperatures between -55 Â°C and 260 Â°C - Part 010: DR family, single UVlaser printable - Product standard

CEN 8/27/2017

I.S. EN 2285:2017Aerospace series - Bushes, plain, aluminium alloy, with self-lubricating liner -Dimensions and loads CEN 5/21/2017

I.S. EN 2286:2017Aerospace series - Bushes, flanged aluminium alloy, with self-lubricating liner -Dimensions and loads CEN 5/21/2017

I.S. EN 2287:2017Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricatingliner - Dimensions and loads CEN 9/17/2017

I.S. EN 2306:2017Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed -Bars CEN 11/13/2017

I.S. EN 2311:2017 Aerospace series - Bushes with self-lubricating liner - Technical specification CEN 4/16/2017

I.S. EN 2346-005:2017Aerospace series - Cable, electrical, fire resistant - Operating temperaturesbetween -65 Â°C and 260 Â°C - Part 005: DW family, single UV laser printableand multicore assembly - Light weight - Product standard

CEN 12/3/2017

I.S. EN 2589:2017Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm â‰ ¤a â‰ ¤ 3 mm - Dimensions CEN 3/24/2017

I.S. EN 2590:2017 Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions CEN 3/24/2017

I.S. EN 2713-012:2017Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 Â°C and 200 Â°C - Part 012: MNA (1core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated ..

CEN 4/9/2017

I.S. EN 2714-002:2016Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 Â°C and 260 Â°C - Part 002: Screenedand jacketed - General

CEN 1/16/2017

I.S. EN 2714-013:2017Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between -55 Â°C and 260 Â°C - Part 013: DR family,screened (spiral) and jacketed, UV laser printable - Product standard

CEN 6/25/2017

I.S. EN 2811:2016Aerospace series - Nuts, hexagon, slotted/ castellated in steel cadmium plated -Classification: 1 100 MPa/235 Â°C CEN 1/16/2017

I.S. EN 2823:2017Aerospace series - Fibre reinforced plastics - Determination of the effect ofexposure to humid atmosphere on physical and mechanical characteristics CEN 4/2/2017

I.S. EN 2850:2017Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates -Compression test parallel to fibre direction CEN 11/5/2017

I.S. EN 2879:2017Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, twolug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated -Classification: 900 MPa (at ambient temperature) / 235 Â°C

CEN 2/5/2017

I.S. EN 2997-001:2017Aerospace series - Connectors, electrical, circular, coupled by threaded ring,fire-resistant or non fire-resistant, operating temperatures - 65 Â°C to 175 Â°Ccontinuous, 200 Â°C continuous, 260 Â°C peak - Part 001: Technical specificati..

CEN 7/9/2017

I.S. EN 2997-006:2017Aerospace series - Connectors, electrical, circular, coupled by threaded ring,fire-resistant or non fire-resistant, operating temperatures - 65 Â°C to 175 Â°Ccontinuous, 200 Â°C continuous, 260 Â°C peak - Part 006: Hermetic jam-nut ..

CEN 12/3/2017

I.S. EN 3021:2017Aerospace series - Molybdenum disulphide dry film lubricants graphite andhalogen free - Technical specification CEN 8/6/2017

I.S. EN 3094:2017Aerospace series - Sealants - Test method - Determination of the applicationtime CEN 11/5/2017

I.S. EN 3302:2017Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) -Classification: 1 000 MPa/550 Â°C - Technical specification CEN 8/13/2017

I.S. EN 3375-011:2017Aerospace series - Cable, electrical for digital data transmission - Part 011:Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard CEN 4/16/2017

I.S. EN 3451:2017 Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forgingstock, for annealed forgings - a or D â‰ ¤ 300 mm

CEN 8/20/2017



Reference Title En Origin Body Publication D..I.S. EN 3375-011:2017Aerospace series - Cable, electrical for digital data transmission - Part 011:Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard CEN 4/16/2017

I.S. EN 3451:2017Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forgingstock, for annealed forgings - a or D â‰ ¤ 300 mm CEN 8/20/2017

I.S. EN 3475-701:2017Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701:Strippability and adherence of insulation to the conductor CEN 11/13/2017

I.S. EN 3475-707:2017Aerospace series - Cables, electrical, aircraft use - Test methods - Part 707:Stabilization of assembly CEN 12/3/2017

I.S. EN 3646-005:2017Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 Â°C or 200 Â°C continuous - Part 005: Receptacle, hermetic,square flange mounting - Product standard

CEN 3/26/2017

I.S. EN 3660-031:2017Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 031: Cable outlet, style K, straight, for heatshrinkable boot, shielded, sealed - Product standard

CEN 9/24/2017

I.S. EN 3660-032:2017Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 032: Cable outlet, style K, straight, for heatshrinkable boot, shielded, sealed - Product standard

CEN 9/24/2017

I.S. EN 3660-034:2017Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 034: Memory metal rings, style Z, for theattachment of screens - Product standard

CEN 9/24/2017

I.S. EN 3660-035:2017Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 035: Cable outlet, style K, 90Â°, for heatshrinkable boot, shielded, sealed - Product standard

CEN 9/24/2017

I.S. EN 3660-066:2017Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 066: Cable outlet, style K, 90Â°, for heatshrinkable boot, shielded, sealed - Product standard

CEN 9/24/2017

I.S. EN 3672:2016Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloyNI-P101HT (Waspaloy), silver plated, for 30Â° swage - Classification: 1 210 MPa(at ambient temperature) / 730 Â°C

CEN 1/16/2017

I.S. EN 3745-510:2017Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part510: Bending test CEN 4/2/2017

I.S. EN 3745-516:2017Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part516: Severe cable bend test CEN 4/9/2017

I.S. EN 3745-517:2017Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part517: Cable tie clamping test CEN 4/9/2017

I.S. EN 3773-006:2017Aerospace series - Circuit breakers, single-pole, temperature compensated,rated currents 1 A to 25 A - Part 006: 6,3 mm blade terminal - Product standardCEN 6/25/2017

I.S. EN 3820:2017Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normalshank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification:1 100 MPa (at ambient temperature)/315 Â°C

CEN 10/29/2017

I.S. EN 3875:2017Aerospace series - Metallic materials, Filler metal for brazing - Technicalspecification CEN 8/20/2017

I.S. EN 3902:2016Aerospace series - Washers for rivet assemblies, in aluminium alloy, anodized,metric series CEN 1/16/2017

I.S. EN 3903:2017 Aerospace series - Washers, laminated, in corrosion resisting steel CEN 4/2/2017

I.S. EN 3904:2017 Aerospace series - Washers, wire locking in aluminium alloy, anodized CEN 12/10/2017

I.S. EN 3908:2017Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel,passivated CEN 2/12/2017

I.S. EN 4008-003:2017Aerospace series - Elements of electrical and optical connection - Crimping toolsand associated accessories - Part 003: Positioner for crimping tool M22520/2-01- Product standard

CEN 4/2/2017

I.S. EN 4008-004:2017Aerospace series - Elements of electrical and optical connection - Crimping toolsand associated accessories - Part 004: Die for crimping tool M22520/5-01 -Product standard

CEN 10/9/2017

I.S. EN 4072:2016/AC:2017Aerospace series - Screws, 100Â° countersunk normal head, offset cruciformrecess, close tolerance shank, short thread in titanium alloy, aluminium IVDcoated - Classification: 1 100 MPa (at ambient temperature) / 425 Â°C

CEN 7/16/2017

I.S. EN 4162:2016/AC:2017Aerospace series - Screws 100Â° countersunk normal head, offset cruciformrecess, coarse tolerance normal shank, medium length thread, in alloy steel,cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Â°C

CEN 7/23/2017

I.S. EN 4165-001:2015/AC:2017Aerospace series - Connectors, electrical, rectangular, modular - Operatingtemperature 175 Â°C continuous - Part 001: Technical specification CEN 10/15/2017

I.S. EN 4165-024:2017Aerospace series - Connectors, electrical, rectangular, modular - Operatingtemperature 175 Â°C continuous - Part 024: Single module plug - Productstandard

CEN 3/26/2017

I.S. EN 4165-025:2017Aerospace series - Connectors, electrical, rectangular, modular - Operatingtemperature 175 Â°C continuous - Part 025: Single module receptacle - Productstandard

CEN 3/26/2017

I.S. EN 4178:2017Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normalshank, medium length thread, in titanium alloy, anodized, MoS2 lubricated -Classification: 1 100 MPa (at ambient temperature) / 315 Â°C

CEN 2/5/2017

I.S. EN 4179:2017Aerospace series - Qualification and approval of personnel for non-destructivetesting CEN 1/30/2017

I.S. EN 4297:2017Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height,normal across flats, in corrosion resisting steel, passivated - Classification: 900MPa (at ambient temperature) / 120 Â°C

CEN 2/5/2017

I.S. EN 4309:2016Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height,normal across flats, in alloy steel, cadmium plated - Classification: 900 MPa (atambient temperature) / 120 Â°C

CEN 1/16/2017

I.S. EN 4531-001:2017Aerospace series - Connectors, optical, circular, single and multipin, coupled bytriple start threaded ring - Flush contacts - Part 001: Technical specification CEN 1/30/2017

I.S. EN 4604-009:2017Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable,coaxial, light weight, 50 ohms, 180 Â°C, type KW (light WN) - Product standard CEN 3/26/2017

I.S. EN 4604-010:2017 Aerospace series - Cable, electrical, for signal transmission - Part 010 : Cable,coaxial, light weight, 50 Ohms, 200 Â°C, type KX (light WD) - Product standard

CEN 4/2/2017



Reference Title En Origin Body Publication D..I.S. EN 4604-009:2017Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable,coaxial, light weight, 50 ohms, 180 Â°C, type KW (light WN) - Product standard CEN 3/26/2017

I.S. EN 4604-010:2017Aerospace series - Cable, electrical, for signal transmission - Part 010 : Cable,coaxial, light weight, 50 Ohms, 200 Â°C, type KX (light WD) - Product standard CEN 4/2/2017

I.S. EN 4644-001:2017Aerospace series - Connector, electrical and optical, rectangular, modular,rectangular inserts, operating temperature 175 Â°C (or 125 Â°C) continuous -Part 001: Technical specification

CEN 11/5/2017

I.S. EN 4644-002:2016Aerospace series - Connector, electrical and optical, rectangular, modular,rectangular inserts, operating temperature 175 Â°C (or 125 Â°C) continuous -Part 002: Specification of performance and contact arrangements

CEN 1/16/2017

I.S. EN 4644-142:2016Aerospace series - Connector, electrical and optical, rectangular, modular,rectangular inserts, operating temperature 175 Â°C (or 125 Â°C) continuous -Part 142: Size 4 receptacle for rack and panel application, class C and D - Prod..

CEN 1/16/2017

I.S. EN 4652-002:2017Aerospace series - Connectors, coaxial, radiofrequency - Part 002: Specificationof performances CEN 11/29/2017

I.S. EN 4652-220:2017Aerospace series - Connectors, coaxial, radio frequency - Part 220: Type 2, TNCinterface - Crimp version - Straight plug - Product standard CEN 8/27/2017

I.S. EN 4652-221:2017Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNCinterface - Crimp version - Right angle plug - Product standard CEN 12/3/2017

I.S. EN 4652-222:2017Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNCinterface - Crimp version - Square flange receptacle - Product standard CEN 12/3/2017

I.S. EN 4652-320:2017Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, Ninterface - Crimp version - Straight plug - Product standard CEN 12/3/2017

I.S. EN 4652-321:2017Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, Ninterface - Crimp assembly version - Right angle plug - Product standard CEN 12/3/2017

I.S. EN 4652-322:2017Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, Ninterface - Crimp version - Square flange receptacle - Product standard CEN 12/3/2017

I.S. EN 4652-420:2017Aerospace series - Connectors, coaxial, radio frequency - Part 420: Type 4, Cinterface - Crimp assembly version - Straight plug - Product standard CEN 11/5/2017

I.S. EN 4652-421:2017Aerospace series - Connectors, coaxial, radio frequency - Part 421: Type 4, Cinterface - Crimp assembly version - Right angle plug - Product standard CEN 11/5/2017

I.S. EN 4674-001:2017Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI)protective sleeve - Part 001: Technical specification CEN 4/9/2017

I.S. EN 4674-003:2017Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI)protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMIprotection 5 kA - Temperature range - 65 Â°C to 200 Â°C - Product standard

CEN 6/25/2017

I.S. EN 4674-004:2017Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI)protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMIprotection 10 kA - Temperature range - 65 Â°C to 200 Â°C - Product standard

CEN 12/3/2017

I.S. EN 4681-001:2017Aerospace series - Cables, electric, general purpose, with conductors inaluminium or copper-clad aluminium - Part 001: Technical Specification CEN 7/23/2017

I.S. EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification CEN 10/29/2017

I.S. EN 4692:2017 Aerospace series - Tie Rod with integrated bolts -Locking clip CEN 10/29/2017

I.S. EN 4693:2017 Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C CEN 10/29/2017

I.S. EN 4694:2017 Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F CEN 10/29/2017

I.S. EN 4695:2017 Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K CEN 10/23/2017

I.S. EN 4702-02:2017Aerospace series - Quick release fastening systems for non-structural and liningapplications - Part 02: Spring clamp stud combination CEN 10/23/2017

I.S. EN 4702-03:2017Aerospace series - Quick release fastening systems for non-structural and liningapplications - Part 03: Stud - quick-release and locking CEN 10/23/2017

I.S. EN 4702-04:2017Aerospace series - Quick release fastening systems for non-structural and liningapplications - Part 04: Spring clamp CEN 10/23/2017

I.S. EN 4702-05:2017Aerospace series - Quick release fastening systems for non-structural and liningapplications - Part 05: Retaining washer CEN 10/23/2017

I.S. EN 4708-101:2017Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 101: Polyolefin sleeving - Operating temperatures -55 Â°C to135 Â°C - Product standard

CEN 3/26/2017

I.S. EN 4708-104:2017Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operatingtemperature - 55 Â°C to 175 Â°C - Product Standard

CEN 12/10/2017

I.S. EN 4727:2017 Aerospace series - Standardized passenger seat weight information CEN 5/28/2017

I.S. EN 4729:2017Aerospace series - Trivalent chromium based chemical conversion coatings foraluminium and aluminium alloys CEN 9/24/2017

I.S. EN 4801:2017Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, inheat resisting steel - Inch series CEN 5/28/2017

I.S. EN 4802:2017Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, innickel alloy - Inch series CEN 5/28/2017

I.S. EN 4803:2017Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, inheat resisting steel - Inch series CEN 5/28/2017

I.S. EN 4804:2017 Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, innickel alloy - Inch series

CEN 7/2/2017



Reference Title En Origin Body Publication D..I.S. EN 4803:2017Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, inheat resisting steel - Inch series CEN 5/28/2017

I.S. EN 4804:2017Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, innickel alloy - Inch series CEN 7/2/2017

I.S. EN 4805:2017Aerospace series - Flange couplings - Weld coupling, straight, in heat resistingsteel - Inch series CEN 7/2/2017

I.S. EN 4806:2017Aerospace series - Flange couplings - Weld coupling, straight, in nickel alloy -Inch series CEN 7/2/2017

I.S. EN 4807:2017Aerospace series - Flange couplings - Weld coupling, 90Â° elbow, in heatresisting steel - Inch series CEN 6/4/2017

I.S. EN 4808:2017Aerospace series - Flange couplings - Weld coupling, 90Â° elbow, in nickel alloy- Inch series CEN 6/4/2017

I.S. EN 4809:2017Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal onaluminium plate with 3 fastening holes - Inch series CEN 7/2/2017

I.S. EN 4810:2017Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal onheat resisting steel plate with 3 fastening holes - Inch series CEN 5/14/2017

I.S. EN 4811:2017Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal onaluminium plate with 4 fastening holes - Inch series CEN 6/11/2017

I.S. EN 4812:2017Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal onheat resisting steel plate with 4 fastening holes - Inch series CEN 6/11/2017

I.S. EN 4813:2017 Aerospace series - Flange couplings - Cap, in heat resisting steel - Inch series CEN 6/11/2017

I.S. EN 4814:2017Aerospace series - Flange couplings up to 21 000 kPa - Technical specification -Inch series CEN 6/11/2017

I.S. EN 4816:2017Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal -Technical specification - Inch series CEN 6/11/2017

I.S. EN 4827:2017Aerospace series - Hexavalent chromium free anodizing of aluminium andaluminium alloys CEN 3/6/2017

I.S. EN 6018:2017Aerospace series - Test methods for metallic materials - Determination ofdensity according to displacement method CEN 12/3/2017

I.S. EN 6029:2017Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shankmin. engagement: 1,5 x thread diameter in corrosion resisting steel -Dimensions and loads - Inch series

CEN 1/30/2017

I.S. EN 6049-008:2017Aerospace series - Electrical cables, installation - Protection sleeve inmeta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleevewith nickel copper braid, flexible post installation operating temperature from -..

CEN 12/3/2017

I.S. EN 6059-202:2016Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 202: Dimensions and mass CEN 1/16/2017

I.S. EN 6059-301:2017Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 301: Sun light exposure CEN 4/16/2017

I.S. EN 6059-302:2017Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 302: High temperature exposure CEN 4/16/2017

I.S. EN 6059-303:2017Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 303: Resistance to fluids CEN 12/3/2017

I.S. EN 6059-304:2017Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 304: Flammability CEN 4/16/2017

I.S. EN 6059-503:2017Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 503: Temperature rise due to rated current injected on thesleeve

CEN 8/27/2017

I.S. EN 6075:2017Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded,phosphate ester resistant (- 55 Â°C to 107 Â°C) - Inch series CEN 5/21/2017

I.S. EN 6076:2017Aerospace series - Static seal elements O-Ring for straight thread tube fittingboss, ethylene-propylene, moulded, phosphate ester resistant (-55 Â°C to 107Â°C) - Inch series

CEN 5/21/2017

I.S. EN 6128:2017 Aerospace series - Blind bolt, 100Â° flush head, high strength CEN 10/23/2017

I.S. EN 6129:2016/AC:2017 Aerospace series - Blind bolt, protruding head, high strength, pulltype CEN 1/30/2017

I.S. EN 6138:2017Aerospace series - Cap, protective, non-metallic for fitting ends â‰ ¤ 3 000 PSIhydraulic systems CEN 4/16/2017

I.S. EN 9117:2017 Aerospace series - Delegated Product Release Verification CEN 10/23/2017

I.S. EN 9132:2017Aerospace series - Quality management systems - Data Matrix QualityRequirements for Parts Marking CEN 3/24/2017

I.S. EN 9300-005:2017Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digitaltechnical product documentation such as 3D, CAD and PDM data - Part 005:Authentication and Verification

CEN 10/23/2017

I.S. EN 9300-007:2017Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digitaltechnical product documentation such as 3D, CAD and PDM data - Part 007:Terms and References

CEN 10/23/2017

I.S. EN 10028-1:2017Flat products made of steels for pressure purposes - Part 1: Generalrequirements CEN 8/13/2017

I.S. EN 10028-2:2017Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloysteels with specified elevated temperature properties CEN 8/13/2017

I.S. EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grainsteels, normalized

CEN 8/13/2017



Reference Title En Origin Body Publication D..I.S. EN 10028-2:2017Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloysteels with specified elevated temperature properties CEN 8/13/2017

I.S. EN 10028-3:2017Flat products made of steels for pressure purposes - Part 3: Weldable fine grainsteels, normalized CEN 8/13/2017

I.S. EN 10028-4:2017Flat products made of steels for pressure purposes - Part 4: Nickel alloy steelswith specified low temperature properties CEN 8/13/2017

I.S. EN 10028-5:2017Flat products made of steels for pressure purposes - Part 5: Weldable fine grainsteels, thermomechanically rolled CEN 8/13/2017

I.S. EN 10028-6:2017Flat products made of steels for pressure purposes - Part 6: Weldable fine grainsteels, quenched and tempered CEN 8/13/2017

I.S. EN 10056-1:2017 Structural steel equal and unequal leg angles - Part 1: Dimensions CEN 2/5/2017

I.S. EN 10120:2017 Steel sheet and strip for welded gas cylinders CEN 8/13/2017

I.S. EN 10152:2017Electrolytically zinc coated cold rolled steel flat products for cold forming -Technical delivery conditions CEN 2/12/2017

I.S. EN 10207:2017Steels for simple pressure vessels - Technical delivery requirements for plates,strips and bars CEN 11/26/2017

I.S. EN 10222-1:2017Steel forgings for pressure purposes - Part 1: General requirements for open dieforgings CEN 4/30/2017

I.S. EN 10222-2:2017Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels withspecified elevated temperatures properties CEN 4/30/2017

I.S. EN 10222-3:2017Steel forgings for pressure purposes - Part 3: Nickel steels with specified lowtemperature properties CEN 4/30/2017

I.S. EN 10222-4:2017Steel forgings for pressure purposes - Part 4: Weldable fine grain steels withhigh proof strength CEN 4/30/2017

I.S. EN 10222-5:2017Steel forgings for pressure purposes - Part 5: Martensitic, austenitic andaustenitic-ferritic stainless steels CEN 4/30/2017

I.S. EN 10247:2017Micrographic examination of the non-metallic inclusion content of steels usingstandard pictures CEN 7/30/2017

I.S. EN 10263-1:2017Steel rod, bars and wire for cold heading and cold extrusion - Part 1: Generaltechnical delivery conditions CEN 11/29/2017

I.S. EN 10263-2:2017Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technicaldelivery conditions for steels not intended for heat treatment after cold working CEN 11/29/2017

I.S. EN 10263-3:2017Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technicaldelivery conditions for case hardening steels CEN 11/29/2017

I.S. EN 10263-4:2017Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technicaldelivery conditions for steels for quenching and tempering CEN 12/10/2017

I.S. EN 10263-5:2017Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technicaldelivery conditions for stainless steels CEN 12/17/2017

I.S. EN 10270-1:2011+A1:2017Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed springsteel wire CEN 6/18/2017

I.S. EN 10365:2017 Hot rolled steel channels, I and H sections - Dimensions and masses CEN 2/5/2017

I.S. EN 12004-1:2017Adhesives for ceramic tiles - Part 1: Requirements, assessment and verificationof constancy of performance, classification and marking CEN 3/6/2017

I.S. EN 12004-2:2017 Adhesives for ceramic tiles - Part 2: Test methods CEN 3/6/2017

I.S. EN 12014-2:2017Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/ICmethod for the determination of nitrate content of vegetables and vegetableproducts

CEN 12/24/2017

I.S. EN 12020-2:2016/AC:2017Aluminium and aluminium alloys - Extruded precision profiles in alloys ENAW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form CEN 3/26/2017

I.S. EN 12039:2016/AC:2017Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing -Determination of adhesion of granules CEN 4/16/2017

I.S. EN 12080:2017 Railway applications - Axleboxes - Rolling bearings CEN 9/24/2017

I.S. EN 12081:2017 Railway applications - Axleboxes - Lubricating greases CEN 9/24/2017

I.S. EN 12082:2017 Railway applications - Axleboxes - Performance testing CEN 9/24/2017

I.S. EN 12098-1:2017Energy Performance of Buildings - Controls for heating systems - Part 1: Controlequipment for hot water heating systems - Modules M3-5, 6, 7, 8 CEN 5/21/2017

I.S. EN 12098-3:2017Energy Performance of Buildings - Controls for heating systems - Part 3: Controlequipment for electrical heating systems - Modules M3-5,6,7,8 CEN 6/4/2017

I.S. EN 12098-5:2017Energy Performance of Buildings - Controls for heating systems - Part 5:Start-stop schedulers for heating systems - Modules M3-5,6,7,8 CEN 6/4/2017

I.S. EN 12101-2:2017Smoke and heat control systems - Part 2: Natural smoke and heat exhaustventilators CEN 4/16/2017

I.S. EN 12102-1:2017 Air conditioners, liquid chilling packages, heat pumps, process chillers anddehumidifiers with electrically driven compressors - Determination of the soundpower level - Part 1: Air conditioners, liquid chilling packages, heat pumps for ..

CEN 12/17/2017



Reference Title En Origin Body Publication D..I.S. EN 12101-2:2017Smoke and heat control systems - Part 2: Natural smoke and heat exhaustventilators CEN 4/16/2017

I.S. EN 12102-1:2017Air conditioners, liquid chilling packages, heat pumps, process chillers anddehumidifiers with electrically driven compressors - Determination of the soundpower level - Part 1: Air conditioners, liquid chilling packages, heat pumps for ..

CEN 12/17/2017

I.S. EN 12207:2016 Windows and doors - Air permeability - Classification CEN 1/1/2017

I.S. EN 12312-3:2017Aircraft ground support equipment - Specific requirements - Part 3: Conveyorbelt vehicles CEN 1/30/2017

I.S. EN 12312-6:2017Aircraft ground support equipment - Specific requirements - Part 6: Deicers andde-icing/anti-icing equipment CEN 4/9/2017

I.S. EN 12312-12:2017Aircraft ground support equipment - Specific requirements - Part 12: Potablewater service equipment CEN 5/28/2017

I.S. EN 12312-13:2017Aircraft ground support equipment - Specific requirements - Part 13: Lavatoryservice equipment CEN 5/28/2017

I.S. EN 12397:2017Safety requirements for cableway installations designed to carry persons -Operation CEN 5/9/2017

I.S. EN 12421:2017 Magnesium and magnesium alloys - Unalloyed magnesium CEN 3/26/2017

I.S. EN 12438:2017 Magnesium and magnesium alloys - Magnesium alloys for cast anodes CEN 9/24/2017

I.S. EN 12440:2017 Natural stone - Denomination criteria CEN 11/29/2017

I.S. EN 12453:2017Industrial, commercial and garage doors and gates - Safety in use of poweroperated doors - Requirements and test methods CEN 9/10/2017

I.S. EN 12485:2017Chemicals used for treatment of water intended for human consumption -Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide,calcium magnesium carbonate and dolomitic lime - Test methods

CEN 8/13/2017

I.S. EN 12572-1:2017Artificial climbing structures - Part 1: Safety requirements and test methods forACS with protection points CEN 1/22/2017

I.S. EN 12572-2:2017Artificial climbing structures - Part 2: Safety requirements and test methods forbouldering walls CEN 1/30/2017

I.S. EN 12572-3:2017Artificial climbing structures - Part 3: Safety requirements and test methods forclimbing holds CEN 1/30/2017

I.S. EN 12574-1:2017Stationary waste containers - Part 1: Containers with a capacity up to 10 000 lwith flat or dome lid(s), for trunnion, double trunnion or pocket lifting device -Dimensions and design

CEN 2/20/2017

I.S. EN 12574-2:2017Stationary waste containers - Part 2: Performance requirements and testmethods CEN 2/20/2017

I.S. EN 12574-3:2017 Stationary waste containers - Part 3: Safety and health requirements CEN 2/20/2017

I.S. EN 12604:2017Industrial, commercial and garage doors and gates - Mechanical aspects -Requirements and test methods CEN 10/23/2017

I.S. EN 12627:2017 Industrial valves - Butt welding ends for steel valves CEN 12/10/2017

I.S. EN 12675:2017 Traffic signal controllers - Functional safety requirements CEN 9/10/2017

I.S. EN 12681-1:2017 Founding - Radiographic testing - Part 1: Film techniques CEN 12/17/2017

I.S. EN 12681-2:2017 Founding - Radiographic testing - Part 2: Techniques with digital detectors CEN 11/29/2017

I.S. EN 12697-10:2017 Bituminous mixtures - Test methods - Part 10: Compactability CEN 12/24/2017

I.S. EN 12697-13:2017 Bituminous mixtures - Test methods - Part 13: Temperature measurement CEN 12/3/2017

I.S. EN 12697-17:2017Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphaltspecimens CEN 3/24/2017

I.S. EN 12697-18:2017 Bituminous mixtures - Test methods - Part 18: Binder drainage CEN 7/16/2017

I.S. EN 12697-23:2017Bituminous mixtures - Test methods - Part 23: Determination of the indirecttensile strength of bituminous specimens CEN 12/3/2017

I.S. EN 12697-27:2017 Bituminous mixtures - Test methods - Part 27: Sampling CEN 7/9/2017

I.S. EN 12791:2016+A1:2017Chemical disinfectants and antiseptics - Surgical hand disinfection - Test methodand requirements (phase 2, step 2) CEN 11/29/2017

I.S. EN 12831-1:2017Energy performance of buildings - Method for calculation of the design heatload - Part 1: Space heating load, Module M3-3 CEN 7/30/2017

I.S. EN 12831-3:2017Energy performance of buildings - Method for calculation of the design heatload - Part 3: Domestic hot water systems heat load and characterisation ofneeds, Module M8-2, M8-3

CEN 7/30/2017

I.S. EN 12868:2017Child use and care articles - Method for determining the release ofN-nitrosamines and N-nitrosatable substances from elastomer or rubber teatsand soothers

CEN 1/30/2017

I.S. EN 12976-1:2017 Thermal solar systems and components - Factory made systems - Part 1:General requirements

CEN 2/12/2017



Reference Title En Origin Body Publication D..I.S. EN 12868:2017

Child use and care articles - Method for determining the release ofN-nitrosamines and N-nitrosatable substances from elastomer or rubber teatsand soothers CEN 1/30/2017

I.S. EN 12976-1:2017Thermal solar systems and components - Factory made systems - Part 1:General requirements CEN 2/12/2017

I.S. EN 12976-2:2017Thermal solar systems and components - Factory made systems - Part 2: Testmethods CEN 2/12/2017

I.S. EN 13032-2:2017Light and lighting - Measurement and presentation of photometric data of lampsand luminaires - Part 2: Presentation of data for indoor and outdoor work placesCEN 12/10/2017

I.S. EN 13100-1:2017Non destructive testing of welded joints of thermoplastics semi-finishedproducts - Part 1: Visual examination CEN 6/11/2017

I.S. EN 13108-1:2016 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete CEN 1/6/2017

I.S. EN 13108-2:2016Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for VeryThin Layers (BBTM) CEN 1/6/2017

I.S. EN 13108-3:2016 Bituminous mixtures - Material specifications - Part 3: Soft Asphalt CEN 1/6/2017

I.S. EN 13108-4:2016 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt CEN 1/6/2017

I.S. EN 13108-4:2016/AC:2017 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt CEN 11/13/2017

I.S. EN 13108-5:2016 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt CEN 1/6/2017

I.S. EN 13108-6:2016 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt CEN 1/6/2017

I.S. EN 13108-7:2016 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt CEN 1/6/2017

I.S. EN 13108-8:2016 Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt CEN 1/6/2017

I.S. EN 13108-9:2016Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-ThinLayer (AUTL) CEN 1/6/2017

I.S. EN 13108-20:2016 Bituminous mixtures - Material specifications - Part 20: Type Testing CEN 1/6/2017

I.S. EN 13108-21:2016Bituminous mixtures - Material specifications - Part 21: Factory ProductionControl CEN 1/6/2017

I.S. EN 13110:2012+A1:2017LPG equipment and accessories - Transportable refillable welded aluminiumcylinders for liquefied petroleum gas (LPG) - Design and construction CEN 2/12/2017

I.S. EN 13126-8:2017Building hardware - Hardware for windows and door height windows - Part 8:Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Onlyhardware

CEN 11/29/2017

I.S. EN 13141-3:2017Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 3: Range hoods for residential use without fan CEN 7/2/2017

I.S. EN 13146-5:2012/AC:2017Railway applications - Track - Test methods for fastening systems - Part 5:Determination of electrical resistance CEN 6/11/2017

I.S. EN 13146-10:2017Railway applications - Track - Test methods for fastening systems - Part 10:Proof load test for pull-out resistance CEN 1/30/2017

I.S. EN 13200-8:2017 Spectator facilities - Part 8: Safety Management CEN 5/21/2017

I.S. EN 13206:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture CEN 2/12/2017

I.S. EN 13227:2017 Wood flooring - Solid lamparquet products CEN 11/29/2017

I.S. EN 13277-8:2017Protective equipment for martial arts - Part 8: Additional requirements and testmethods for karate face protectors CEN 12/3/2017

I.S. EN 13284-1:2017Stationary source emissions - Determination of low range mass concentration ofdust - Part 1: Manual gravimetric method CEN 11/29/2017

I.S. EN 13284-2:2017Stationary source emissions - Determination of low range mass concentration ofdust - Part 2: Quality assurance of automated measuring systems CEN 11/29/2017

I.S. EN 13303:2017Bitumen and bituminous binders - Determination of the loss in mass afterheating of industrial bitumen CEN 10/15/2017

I.S. EN 13306:2017 Maintenance - Maintenance terminology CEN 12/17/2017

I.S. EN 13329:2016+A1:2017Laminate floor coverings - Elements with a surface layer based on aminoplasticthermosetting resins - Specifications, requirements and test methods CEN 10/29/2017

I.S. EN 13368-2:2017Fertilizers - Determination of chelating agents in fertilizers by chromatography -Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED,or the amount of chelating agents, by ion pair chromatography

CEN 12/3/2017

I.S. EN 13368-3:2017Fertilizers - Determination of chelating agents in fertilizers by chromatography -Part 3: Determination of [S,S]-EDDS by ion pair chromatography CEN 12/31/2017

I.S. EN 13398:2017Bitumen and bituminous binders - Determination of the elastic recovery ofmodified bitumen CEN 12/24/2017

I.S. EN 13399:2017 Bitumen and bituminous binders - Determination of storage stability of modifiedbitumen

CEN 12/24/2017



Reference Title En Origin Body Publication D..I.S. EN 13398:2017Bitumen and bituminous binders - Determination of the elastic recovery ofmodified bitumen CEN 12/24/2017

I.S. EN 13399:2017Bitumen and bituminous binders - Determination of storage stability of modifiedbitumen CEN 12/24/2017

I.S. EN 13402-3:2017Size designation of clothes - Part 3: Size labelling based on body measurementsand intervals CEN 10/1/2017

I.S. EN 13445-3:2014/A3:2017 Unfired pressure vessels - Part 3: Design CEN 9/17/2017

I.S. EN 13479:2017Welding consumables - General product standard for filler metals and fluxes forfusion welding of metallic materials CEN 7/16/2017

I.S. EN 13480-1:2017 Metallic industrial piping - Part 1: General CEN 7/16/2017

I.S. EN 13480-2:2017 Metallic industrial piping - Part 2: Materials CEN 7/16/2017

I.S. EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation CEN 7/16/2017

I.S. EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation CEN 7/16/2017

I.S. EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing CEN 7/16/2017

I.S. EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping CEN 7/16/2017

I.S. EN 13480-8:2017Metallic industrial piping - Part 8: Additional requirements for aluminium andaluminium alloy piping CEN 7/16/2017

I.S. EN 13481-2:2012+A1:2017Railway applications - Track - Performance requirements for fastening systems -Part 2: Fastening systems for concrete sleepers CEN 2/12/2017

I.S. EN 13481-5:2012+A1:2017Railway applications - Track - Performance requirements for fastening systems -Part 5: Fastening systems for slab track with rail on the surface or railembedded in a channel

CEN 2/12/2017

I.S. EN 13489:2017 Wood-flooring and parquet - Multi-layer parquet elements CEN 10/15/2017

I.S. EN 13523-1:2017 Coil coated metals - Test methods - Part 1: Film thickness CEN 3/24/2017

I.S. EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) CEN 8/13/2017

I.S. EN 13523-10:2017Coil coated metals - Test methods - Part 10: Resistance to fluorescent UVradiation and water condensation CEN 3/24/2017

I.S. EN 13523-12:2017 Coil coated metals - Test methods - Part 12: Resistance to scratching CEN 3/26/2017

I.S. EN 13523-21:2017Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposedpanels CEN 8/13/2017

I.S. EN 13523-22:2017Coil coated metals - Test methods - Part 22: Colour difference - Visualcomparison CEN 3/24/2017

I.S. EN 13523-24:2017Coil coated metals - Test methods - Part 24: Resistance to blocking andpressure marking CEN 8/13/2017

I.S. EN 13523-27:2017Coil coated metals - Test methods - Part 27: Resistance to humid poultice(Cataplasm test) CEN 4/23/2017

I.S. EN 13523-29:2017Coil coated metals - Test methods - Part 29: Resistance to environmental soiling(Dirt pick-up and striping) CEN 3/26/2017

I.S. EN 13553:2017Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wetareas - Specification CEN 8/20/2017

I.S. EN 13588:2017Bitumen and bituminous binders - Determination of cohesion of bituminousbinders with pendulum test CEN 11/29/2017

I.S. EN 13592:2017Plastics sacks for household waste collection - Types, requirements and testmethods CEN 3/24/2017

I.S. EN 13618:2016Flexible hose assemblies in drinking water installations - Functionalrequirements and test methods CEN 1/1/2017

I.S. EN 13639:2017 Determination of total organic carbon in limestone CEN 10/15/2017

I.S. EN 13653:2017Flexible sheets for waterproofing - Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles - Determination of shear strengthCEN 4/16/2017

I.S. EN 13674-1:2011+A1:2017Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m andabove CEN 5/28/2017

I.S. EN 13743:2017 Safety requirements for coated abrasive products CEN 1/30/2017

I.S. EN 13771-2:2017Compressors and condensing units for refrigeration - Performance testing andtest methods - Part 2: Condensing units CEN 9/24/2017

I.S. EN 13796-1:2017Safety requirements for cableway installations designed to carry persons -Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs,carriages, maintenance carriers, tow-hangers

CEN 5/7/2017

I.S. EN 13796-2:2017 Safety requirements for cableway installations designed to carry persons -Carriers - Part 2: Slipping resistance tests for grips

CEN 3/24/2017



Reference Title En Origin Body Publication D..I.S. EN 13796-1:2017

Safety requirements for cableway installations designed to carry persons -Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs,carriages, maintenance carriers, tow-hangers CEN 5/7/2017

I.S. EN 13796-2:2017Safety requirements for cableway installations designed to carry persons -Carriers - Part 2: Slipping resistance tests for grips CEN 3/24/2017

I.S. EN 13796-3:2017Safety requirements for cableway installations designed to carry persons -Carriers - Part 3: Fatigue testing CEN 3/24/2017

I.S. EN 13803:2017Railway applications - Track - Track alignment design parameters - Trackgauges 1 435 mm and wider CEN 5/14/2017

I.S. EN 13807:2017Transportable gas cylinders - Battery vehicles and multiple-element gascontainers (MEGCs) - Design, manufacture, identification and testing CEN 2/27/2017

I.S. EN 13845:2017Resilient floor coverings - Polyvinyl chloride floor coverings with particle basedenhanced slip resistance - Specification CEN 8/20/2017

I.S. EN 13848-5:2017Railway applications - Track - Track geometry quality - Part 5: Geometric qualitylevels - Plain line, switches and crossings CEN 9/10/2017

I.S. EN 13865:2017 Surfaces for sports areas - Determination of angled ball behaviour - Tennis CEN 3/26/2017

I.S. EN 13865:2017/AC:2017 Surfaces for sports areas - Determination of angled ball behaviour - Tennis CEN 12/17/2017

I.S. EN 13911:2017Protective clothing for firefighters - Requirements and test methods for firehoods for firefighters CEN 9/10/2017

I.S. EN 13915:2017Prefabricated gypsum plasterboard panels with a cellular paperboard core -Definitions, requirements and test methods CEN 7/23/2017

I.S. EN 13952:2017 LPG equipment and accessories - Filling operations for LPG cylinders CEN 7/2/2017

I.S. EN 13967:2012+A1:2017Flexible sheets for waterproofing - Plastic and rubber damp proof sheetsincluding plastic and rubber basement tanking sheet - Definitions andcharacteristics

CEN 4/30/2017

I.S. EN 14033-1:2017Railway applications - Track - Railbound construction and maintenancemachines - Part 1: Technical requirements for running CEN 6/18/2017

I.S. EN 14033-2:2017Railway applications - Track - Railbound construction and maintenancemachines - Part 2: Technical requirements for travelling and working CEN 6/18/2017

I.S. EN 14033-3:2017Railway applications - Track - Railbound construction and maintenancemachines - Part 3: General safety requirements CEN 6/18/2017

I.S. EN 14058:2017 Protective clothing - Garments for protection against cool environments CEN 12/10/2017

I.S. EN 14069:2017 Liming materials - Denominations, specifications and labelling CEN 11/29/2017

I.S. EN 14157:2017 Natural stone test methods - Determination of the abrasion resistance CEN 10/29/2017

I.S. EN 14176:2017Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish andcooked mussels by RP-HPLC using UV detection CEN 1/30/2017

I.S. EN 14187-1:2017Cold applied joint sealants - Test methods - Part 1: Determination of rate ofcure CEN 7/2/2017

I.S. EN 14187-2:2017Cold applied joint sealants - Test methods - Part 2: Determination of tack freetime CEN 4/16/2017

I.S. EN 14187-3:2017Cold applied joint sealants - Test methods - Part 3: Determination ofself-levelling properties CEN 4/16/2017

I.S. EN 14187-4:2017Cold applied joint sealants - Test methods - Part 4: Determination of the changein mass and volume after immersion in test fuels and liquid chemicals CEN 4/16/2017

I.S. EN 14187-6:2017Cold applied joint sealants - Test method - Part 6: Determination of theadhesion/cohesion properties after immersion in test fuels and liquid chemicals CEN 4/16/2017

I.S. EN 14187-8:2017Cold applied joint sealants - Test methods - Part 8: Determination of theartificial weathering by UV-irradiation CEN 4/16/2017

I.S. EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods CEN 7/23/2017

I.S. EN 14223:2017Flexible sheets for waterproofing - Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles - Determination of waterabsorption

CEN 4/16/2017

I.S. EN 14225-1:2017 Diving suits - Part 1: Wet suits - Requirements and test methods CEN 12/24/2017

I.S. EN 14225-2:2017 Diving suits - Part 2: Dry suits - Requirements and test methods CEN 12/24/2017

I.S. EN 14225-3:2017Diving suits - Part 3: Actively heated or cooled suit systems and components -Requirements and test methods CEN 12/24/2017

I.S. EN 14298:2017 Sawn timber - Assessment of drying quality CEN 11/13/2017

I.S. EN 14322:2017Wood-based panels - Melamine faced board for interior uses - Definition,requirements and classification CEN 4/9/2017

I.S. EN 14323:2017 Wood-based panels - Melamine faced boards for interior uses - Test methods CEN 3/26/2017

I.S. EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards -Definitions, requirements and test methods

CEN 7/23/2017



Reference Title En Origin Body Publication D..I.S. EN 14323:2017 Wood-based panels - Melamine faced boards for interior uses - Test methods CEN 3/26/2017

I.S. EN 14353:2017Metal beads and feature profiles for use with gypsum plasterboards -Definitions, requirements and test methods CEN 7/23/2017

I.S. EN 14354:2017 Wood-based panels - Wood veneer floor coverings CEN 8/13/2017

I.S. EN 14359:2017 Gas-loaded accumulators for fluid power applications CEN 4/30/2017

I.S. EN 14405:2017Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 3/24/2017

I.S. EN 14450:2017Secure storage units - Requirements, classification and methods of test forresistance to burglary - Secure safe cabinets CEN 11/29/2017

I.S. EN 14478:2017 Railway applications - Braking - Generic vocabulary CEN 12/24/2017

I.S. EN 14496:2017Gypsum based adhesives for thermal/acoustic insulation composite panels andgypsum boards - Definitions, requirements and test methods CEN 7/23/2017

I.S. EN 14526:2017Foodstuffs - Determination of saxitoxin-group toxins in shellfish - HPLC methodusing pre-column derivatization with peroxide or periodate oxidation CEN 2/5/2017

I.S. EN 14534:2016/AC:2017Postal services - Quality of service - Measurement of the transit time ofend-to-end services for bulk mail CEN 1/30/2017

I.S. EN 14543:2017Specification for dedicated liquefied petroleum gas appliances - Parasol patioheaters - Flueless radiant heaters for outdoor or amply ventilated area use CEN 7/30/2017

I.S. EN 14615:2017 Postal services - Digital postage marks - Applications, security and design CEN 10/9/2017

I.S. EN 14691:2017Flexible sheets for waterproofing - Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles - Compatibility by heatconditioning

CEN 4/16/2017

I.S. EN 14692:2017Flexible sheets for waterproofing - Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles - Determination of the resistanceto compaction of an asphalt layer

CEN 4/16/2017

I.S. EN 14693:2017Flexible sheets for waterproofing - Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles - Determination of the behaviourof waterproofing sheets during application of mastic asphalt

CEN 4/23/2017

I.S. EN 14694:2017Flexible sheets for waterproofing - Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles - Determination of resistance todynamic water pressure after damage by pre-treatment

CEN 4/16/2017

I.S. EN 14730-1:2017Railway applications - Track - Aluminothermic welding of rails - Part 1: Approvalof welding processes CEN 3/24/2017

I.S. EN 14789:2017Stationary source emissions - Determination of volume concentration of oxygen- Standard reference method: Paramagnetism CEN 1/30/2017

I.S. EN 14790:2017Stationary source emissions - Determination of the water vapour in ducts -Standard reference method CEN 1/30/2017

I.S. EN 14791:2017Stationary source emissions - Determination of mass concentration of sulphuroxides - Standard reference method CEN 1/30/2017

I.S. EN 14792:2017Stationary source emissions - Determination of mass concentration of nitrogenoxides - Standard reference method: chemiluminescence CEN 1/30/2017

I.S. EN 14793:2017Stationary source emissions - Demonstration of equivalence of an alternativemethod with a reference method CEN 1/30/2017

I.S. EN 14891:2017Liquid applied water impermeable products for use beneath ceramic tilingbonded with adhesives - Requirements, test methods, assessment andverification of constancy of performance, classification and marking

CEN 3/6/2017

I.S. EN 14915:2013+A1:2017 Solid wood panelling and cladding - Characteristics, requirements and marking CEN 6/25/2017

I.S. EN 14986:2017 Design of fans working in potentially explosive atmospheres CEN 1/30/2017

I.S. EN 14988:2017 Children's high chairs - Requirements and test methods CEN 7/30/2017

I.S. EN 15004-7:2017Fixed firefighting systems - Gas extinguishing systems - Part 7: Physicalproperties and system design of gas extinguishing systems for IG-01extinguishant (ISO 14520-12:2015, modified)

CEN 12/31/2017

I.S. EN 15004-8:2017Fixed firefighting systems - Gas extinguishing systems - Part 8: Physicalproperties and system design of gas extinguishing systems for IG-100extinguishant (ISO 14520-13:2015, modified)

CEN 12/31/2017

I.S. EN 15004-9:2017Fixed firefighting system - Gas extinguishing systems - Part 9: Physicalproperties and system design of gas extinguishing systems for IG-55extinguishant (ISO 14520-14:2015, modified)

CEN 12/31/2017

I.S. EN 15004-10:2017Fixed firefighting systems - Gas extinguishing systems - Part 10: Physicalproperties and system design of gas extinguishing systems for IG-541 (ISO14520-15:2015, modified)

CEN 12/31/2017

I.S. EN 15007:2017Aerosol containers - Tinplate containers - Dimensions of two and three-piececans CEN 4/9/2017

I.S. EN 15008:2017Aerosol containers - Aluminium containers - Dimensions of one-piece cans with25,4 mm aperture CEN 4/9/2017

I.S. EN 15058:2017Stationary source emissions - Determination of the mass concentration ofcarbon monoxide - Standard reference method: non-dispersive infraredspectrometry

CEN 1/30/2017

I.S. EN 15163:2017Machines and installations for the exploitation and processing of natural stone -Safety - Requirements for diamond wire saws CEN 7/2/2017

I.S. EN 15181:2017 Measuring method of the energy consumption of gas fired ovens CEN 3/24/2017



Reference Title En Origin Body Publication D..I.S. EN 15163:2017Machines and installations for the exploitation and processing of natural stone -Safety - Requirements for diamond wire saws CEN 7/2/2017

I.S. EN 15181:2017 Measuring method of the energy consumption of gas fired ovens CEN 3/24/2017

I.S. EN 15193-1:2017Energy performance of buildings - Energy requirements for lighting - Part 1:Specifications, Module M9 CEN 5/7/2017

I.S. EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles CEN 10/23/2017

I.S. EN 15224:2016 Quality management systems - EN ISO 9001:2015 for healthcare CEN 1/16/2017

I.S. EN 15232-1:2017Energy Performance of Buildings - Energy performance of buildings - Part 1:Impact of Building Automation, Controls and Building Management - ModulesM10-4,5,6,7,8,9,10

CEN 6/11/2017

I.S. EN 15267-4:2017Air quality - Certification of automated measuring systems - Part 4: Performancecriteria and test procedures for automated measuring systems for periodicmeasurements of emissions from stationary sources

CEN 1/30/2017

I.S. EN 15273-1:2013+A1:2016Railway applications - Gauges - Part 1: General - Common rules forinfrastructure and rolling stock CEN 5/9/2017

I.S. EN 15273-2:2013+A1:2016 Railway applications - Gauges - Part 2: Rolling stock gauge CEN 4/25/2017

I.S. EN 15273-3:2013+A1:2017 Railway applications - Gauges - Part 3: Structure gauges CEN 4/25/2017

I.S. EN 15316-1:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 1: General and Energy performanceexpression, Module M3-1, M3-4, M3-9, M8-1, M8-4

CEN 5/14/2017

I.S. EN 15316-2:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 2: Space emission systems (heatingand cooling), Module M3-5, M4-5

CEN 5/21/2017

I.S. EN 15316-3:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 3: Space distribution systems (DHW,heating and cooling), Module M3-6, M4-6, M8-6

CEN 5/14/2017

I.S. EN 15316-4-1:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 4-1: Space heating and DHWgeneration systems, combustion systems (boilers, biomass), Module M3-8-1, M..

CEN 6/4/2017

I.S. EN 15316-4-2:2017/AC:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 4-2: Space heating generationsystems, heat pump systems, Module M3-8-2, M8-8-2

CEN 11/5/2017

I.S. EN 15316-4-3:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 4-3: Heat generation systems,thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3

CEN 5/21/2017

I.S. EN 15316-4-4:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 4-4: Heat generation systems,building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4

CEN 5/14/2017

I.S. EN 15316-4-5:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 4-5: District heating and cooling,Module M3-8-5, M4-8-5, M8-8-5, M11-8-5

CEN 6/4/2017

I.S. EN 15316-4-8:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 4-8: Space heating generationsystems, air heating and overhead radiant heating systems, including stoves (l..

CEN 5/14/2017

I.S. EN 15316-4-10:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 4-10: Wind power generationsystems, Module M11-8-7

CEN 5/28/2017

I.S. EN 15316-5:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 5: Space heating and DHW storagesystems (not cooling), Module M3-7, M8-7

CEN 6/4/2017

I.S. EN 15330-2:2017Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarilydesigned for outdoor use - Part 2: Specification for needle-punched surfaces fortennis and multi-sport surfaces

CEN 7/30/2017

I.S. EN 15378-1:2017Energy performance of buildings - Heating systems and DHW in buildings - Part1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 CEN 5/21/2017

I.S. EN 15378-3:2017Energy performance of buildings - Heating and DHW systems in buildings - Part3: Measured energy performance, Module M3-10, M8-10 CEN 5/7/2017

I.S. EN 15384-1:2017Packaging - Test method to determine the porosity of the internal coating offlexible aluminium tubes - Part 1: Sodium chloride test CEN 2/12/2017

I.S. EN 15384-2:2017Packaging - Test method to determine the porosity of the internal coating offlexible aluminium tubes - Part 2: Copper sulphate test CEN 2/12/2017

I.S. EN 15416-1:2017Adhesives for load bearing timber structures other than phenolic andaminoplastic - Test methods - Part 1: Long-term tension load test perpendicularto the bond line at varying climate conditions with specimens perpendicular to ..

CEN 2/12/2017

I.S. EN 15416-3:2017Adhesives for load bearing timber structures other than phenolic andaminoplastic - Test methods - Part 3: Creep deformation test at cyclic climateconditions with specimens loaded in bending shear

CEN 2/12/2017

I.S. EN 15416-4:2017Adhesives for load bearing timber structures other than phenolic andaminoplastic - Test methods - Part 4: Determination of open assembly timeunder referenced conditions

CEN 2/12/2017

I.S. EN 15416-5:2017Adhesives for load bearing timber structures other than phenolic andaminoplastic - Test methods - Part 5: Determination of minimum pressing timeunder referenced conditions

CEN 2/12/2017

I.S. EN 15425:2017Adhesives - One component polyurethane (PUR) for load-bearing timberstructures - Classification and performance requirements CEN 2/5/2017

I.S. EN 15459-1:2017Energy performance of buildings - Economic evaluation procedure for energysystems in buildings - Part 1: Calculation procedures, Module M1-14 CEN 6/18/2017

I.S. EN 15470:2017Liquefied petroleum gases - Determination of dissolved residues - Hightemperature Gas chromatographic method CEN 7/23/2017

I.S. EN 15471:2017Liquefied petroleum gases - Determination of dissolved residues -High-temperature gravimetric method CEN 7/23/2017

I.S. EN 15500-1:2017 Energy Performance of Buildings - Control for heating, ventilating and airconditioning applications - Part 1: Electronic individual zone control equipment -Modules M3-5, M4-5, M5-5

CEN 5/28/2017



Reference Title En Origin Body Publication D..I.S. EN 15471:2017Liquefied petroleum gases - Determination of dissolved residues -High-temperature gravimetric method CEN 7/23/2017

I.S. EN 15500-1:2017Energy Performance of Buildings - Control for heating, ventilating and airconditioning applications - Part 1: Electronic individual zone control equipment -Modules M3-5, M4-5, M5-5

CEN 5/28/2017

I.S. EN 15502-2-1:2012+A1:2016Gas-fired central heating boilers - Part 2-1: Specific standard for type Cappliances and type B2, B3 and B5 appliances of a nominal heat input notexceeding 1 000 kW

CEN 1/1/2017

I.S. EN 15507:2017Packaging - Transport packaging for dangerous goods - Comparative materialtesting of polyethylene grades CEN 11/29/2017

I.S. EN 15510:2017Animal feeding stuffs: Methods of sampling and analysis - Determination ofcalcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper,manganese, cobalt, molybdenum and lead by ICP-AES

CEN 8/27/2017

I.S. EN 15534-1:2014+A1:2017Composites made from cellulose-based materials and thermoplastics (usuallycalled wood-polymer composites (WPC) or natural fibre composites (NFC)) -Part 1: Test methods for characterisation of compounds and products

CEN 11/29/2017

I.S. EN 15534-6:2015+A1:2017Composites made from cellulose-based materials and thermoplastics (usuallycalled wood-polymer composites (WPC) or natural fibre composites (NFC)) -Part 6: Specifications for fencing profiles and elements

CEN 11/13/2017

I.S. EN 15550:2017Animal feeding stuffs: Methods of sampling and analysis - Determination ofcadmium and lead by graphite furnace atomic absorption spectrometry(GF-AAS) after pressure digestion

CEN 8/27/2017

I.S. EN 15551:2017 Railway applications - Railway rolling stock - Buffers CEN 1/30/2017

I.S. EN 15621:2017Animal feeding stuffs: Methods of sampling and analysis - Determination ofcalcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc,copper, manganese and cobalt after pressure digestion by ICP-AES

CEN 8/27/2017

I.S. EN 15643-5:2017Sustainability of construction works - Sustainability assessment of buildings andcivil engineering works - Part 5: Framework on specific principles andrequirement for civil engineering works

CEN 11/29/2017

I.S. EN 15651-1:2017Sealants for non-structural use in joints in buildings and pedestrian walkways -Part 1: Sealants for facade elements CEN 3/6/2017

I.S. EN 15651-2:2017Sealants for non-structural use in joints in buildings and pedestrian walkways -Part 2: Sealants for glazing CEN 3/6/2017

I.S. EN 15651-3:2017Sealants for non-structural use in joints in buildings and pedestrian walkways -Part 3: Sealants for sanitary joints CEN 3/6/2017

I.S. EN 15651-4:2017Sealants for non-structural use in joints in buildings and pedestrian walkways -Part 4: Sealants for pedestrian walkways CEN 3/6/2017

I.S. EN 15651-4:2017/AC:2017Sealants for non-structural use in joints in buildings and pedestrian walkways -Part 4: Sealants for pedestrian walkways CEN 7/23/2017

I.S. EN 15651-5:2017Sealants for non-structural use in joints in buildings and pedestrian walkways -Part 5: Assessment and verification of constancy of performance, marking andlabelling

CEN 3/26/2017

I.S. EN 15657:2017Acoustic properties of building elements and of buildings - Laboratorymeasurement of structure-borne sound from building service equipment for allinstallation conditions

CEN 8/6/2017

I.S. EN 15663:2017 Railway applications - Vehicle reference masses CEN 7/23/2017

I.S. EN 15681-2:2017Glass in Building - Basic alumino silicate glass products - Part 2: Productstandard CEN 3/6/2017

I.S. EN 15695-1:2017Agricultural tractors and self-propelled sprayers - Protection of the operator(driver) against hazardous substances - Part 1: Cab classification, requirementsand test procedures

CEN 10/15/2017

I.S. EN 15695-2:2017Agricultural tractors and self-propelled sprayers - Protection of the operator(driver) against hazardous substances - Part 2: Filters, requirements and testprocedures

CEN 9/24/2017

I.S. EN 15824:2017Specifications for external renders and internal plasters based on organicbinders CEN 7/16/2017

I.S. EN 15882-1:2011+A1:2017Extended application of results from fire resistance tests for service installations- Part 1: Ducts CEN 11/26/2017

I.S. EN 15918:2011+A2:2017 Cycles - Cycle trailers - Safety requirements and test methods CEN 3/26/2017

I.S. EN 15961:2017Fertilizers - Extraction of water-soluble calcium, magnesium, sodium and sulfurin the form of sulfates CEN 1/30/2017

I.S. EN 15969-1:2017Tanks for transport of dangerous goods - Digital interface for the data transferbetween tank vehicle and with stationary facilities - Part 1: Protocol specification- Control, measurement and event data

CEN 12/31/2017

I.S. EN 15969-2:2017Tanks for transport of dangerous goods - Digital interface for the data transferbetween tank vehicle and with stationary facilities - Part 2: Commercial andlogistic data

CEN 12/31/2017

I.S. EN 15984:2017Petroleum industry and products - Determination of composition of refineryheating gas and calculation of carbon content and calorific value - Gaschromatography method

CEN 8/27/2017

I.S. EN 16120:2012+A2:2016 Child use and care articles - Chair mounted seat CEN 1/16/2017

I.S. EN 16121:2013+A1:2017Non-domestic storage furniture - Requirements for safety, strength, durabilityand stability CEN 10/15/2017

I.S. EN 16147:2017Heat pumps with electrically driven compressors - Testing, performance ratingand requirements for marking of domestic hot water units CEN 1/30/2017

I.S. EN 16147:2017/AC:2017Heat pumps with electrically driven compressors - Testing, performance ratingand requirements for marking of domestic hot water units CEN 6/18/2017

I.S. EN 16186-2:2017Railway applications - Driver's cab - Part 2: Integration of displays, controls andindicators CEN 8/27/2017

I.S. EN 16214-3:2012+A1:2017 Sustainability criteria for the production of biofuels and bioliquids for energyapplications - Principles, criteria, indicators and verifiers - Part 3: Biodiversityand environmental aspects related to nature protection purposes

CEN 7/23/2017



Reference Title En Origin Body Publication D..I.S. EN 16186-2:2017Railway applications - Driver's cab - Part 2: Integration of displays, controls andindicators CEN 8/27/2017

I.S. EN 16214-3:2012+A1:2017Sustainability criteria for the production of biofuels and bioliquids for energyapplications - Principles, criteria, indicators and verifiers - Part 3: Biodiversityand environmental aspects related to nature protection purposes

CEN 7/23/2017

I.S. EN 16282-1:2017Equipment for commercial kitchens - Components for ventilation in commercialkitchens - Part 1: General requirements including calculation method CEN 8/13/2017

I.S. EN 16282-5:2017Equipment for commercial kitchens - Components for ventilation in commercialkitchens - Part 5: Air duct; Design and dimensioning CEN 8/13/2017

I.S. EN 16282-7:2017Equipment for commercial kitchens - Components for ventilation in commercialkitchens - Part 7: Installation and use of fixed fire suppression systems CEN 8/13/2017

I.S. EN 16282-8:2017Equipment for commercial kitchens - Components for ventilation in commercialkitchens - Part 8: Installations for treatment of aerosol; Requirements andtesting

CEN 8/13/2017

I.S. EN 16317:2013+A1:2017Fertilizers and liming materials - Determination of arsenic by inductively coupledplasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution CEN 3/24/2017

I.S. EN 16320:2013+A1:2017Fertilizers and liming materials - Determination of mercury by vapour generation(VG) after aqua regia dissolution CEN 3/24/2017

I.S. EN 16432-1:2017 Railway applications - Ballastless track systems - Part 1: General requirements CEN 7/30/2017

I.S. EN 16432-2:2017Railway applications - Ballastless track systems - Part 2: System design,subsystems and components CEN 8/27/2017

I.S. EN 16450:2017Ambient air - Automated measuring systems for the measurement of theconcentration of particulate matter (PM10; PM2,5) CEN 4/2/2017

I.S. EN 16475-2:2017Chimneys - Accessories - Part 2: Chimney fans - Requirements and testmethods CEN 3/26/2017

I.S. EN 16497-2:2017 Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications CEN 3/26/2017

I.S. EN 16516:2017Construction products: Assessment of release of dangerous substances -Determination of emissions into indoor air CEN 10/23/2017

I.S. EN 16573:2017Ventilation for Buildings - Performance testing of components for residentialbuildings - Multifunctional balanced ventilation units for single family dwellings,including heat pumps

CEN 2/20/2017

I.S. EN 16584-1:2017Railway applications - Design for PRM use - General requirements - Part 1:Contrast CEN 1/22/2017

I.S. EN 16584-2:2017Railway applications - Design for PRM use - General requirements - Part 2:Information CEN 1/22/2017

I.S. EN 16584-3:2017Railway applications - Design for PRM use - General requirements - Part 3:Optical and friction characteristics CEN 1/22/2017

I.S. EN 16585-1:2017Railway applications - Design for PRM use - Equipment and componentsonboard rolling stock - Part 1: Toilets CEN 2/5/2017

I.S. EN 16585-2:2017Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 2: Elements for sitting, standing and moving CEN 2/5/2017

I.S. EN 16585-3:2017Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 3: Clearways and internal doors CEN 2/5/2017

I.S. EN 16586-1:2017Railway applications - Design for PRM use - Accessibility of persons withreduced mobility to rolling stock - Part 1: Steps for access and egress CEN 5/7/2017

I.S. EN 16586-2:2017Railway applications - Design for PRM use - Accessibility of persons withreduced mobility to rolling stock - Part 2: Boarding aids CEN 5/7/2017

I.S. EN 16587:2017Railway applications - Design for PRM Use - Requirements on obstacle freeroutes for infrastructure CEN 6/25/2017

I.S. EN 16602-10:2017 Space product assurance - Product assurance management CEN 4/2/2017

I.S. EN 16602-20-07:2016 Space product assurance - Quality and safety assurance for space test centres CEN 1/22/2017

I.S. EN 16603-10-24:2017 Space engineering - Interface management CEN 9/4/2017

I.S. EN 16603-50-05:2014/AC:2017 Space engineering - Radio frequency and modulation CEN 4/4/2017

I.S. EN 16603-50-15:2017 Space engineering - CANbus extention protocol CEN 7/9/2017

I.S. EN 16603-70-41:2017Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 10/24/2017

I.S. EN 16640:2017Bio-based products - Bio-based carbon content - Determination of the bio-basedcarbon content using the radiocarbon method CEN 3/24/2017

I.S. EN 16640:2017/AC:2017Bio-based products - Bio-based carbon content - Determination of the bio-basedcarbon content using the radiocarbon method CEN 7/30/2017

I.S. EN 16682:2017Conservation of cultural heritage - Methods of measurement of moisturecontent, or water content, in materials constituting immovable cultural heritageCEN 3/24/2017

I.S. EN 16689:2017Protective clothing for firefighters - Performance requirements for protectiveclothing for technical rescue CEN 4/30/2017

I.S. EN 16704-1:2016 Railway applications - Track - Safety protection on the track during work - Part1: Railway risks and common principles for protection of fixed and mobile worksites

CEN 1/16/2017



Reference Title En Origin Body Publication D..I.S. EN 16689:2017Protective clothing for firefighters - Performance requirements for protectiveclothing for technical rescue CEN 4/30/2017

I.S. EN 16704-1:2016Railway applications - Track - Safety protection on the track during work - Part1: Railway risks and common principles for protection of fixed and mobile worksites

CEN 1/16/2017

I.S. EN 16716:2017Mountaineering equipment - Avalanche airbag systems - Safety requirementsand test methods CEN 3/6/2017

I.S. EN 16723-2:2017Natural gas and biomethane for use in transport and biomethane for injection inthe natural gas network - Part 2: Automotive fuels specification CEN 6/25/2017

I.S. EN 16727-3:2017Railway applications - Track - Noise barriers and related devices acting onairborne sound propagation - Non-acoustic performance - Part 3: General safetyand environmental requirements

CEN 2/5/2017

I.S. EN 16750:2017Fixed firefighting systems - Oxygen reduction systems - Design, installation,planning and maintenance CEN 9/24/2017

I.S. EN 16755:2017Durability of reaction to fire performance - Classes of fire-retardant treatedwood products in interior and exterior end use applications CEN 10/29/2017

I.S. EN 16757:2017Sustainability of construction works - Environmental product declarations -Product Category Rules for concrete and concrete elements CEN 7/9/2017

I.S. EN 16763:2017 Services for fire safety systems and security systems CEN 4/2/2017

I.S. EN 16766:2017 Bio-based solvents - Requirements and test methods CEN 11/29/2017

I.S. EN 16783:2017Thermal insulation products - Product category rules (PCR) for factory madeand in-situ formed products for preparing environmental product declarations CEN 4/23/2017

I.S. EN 16798-3:2017Energy performance of buildings - Ventilation for buildings - Part 3: Fornon-residential buildings - Performance requirements for ventilation androom-conditioning systems (Modules M5-1, M5-4)

CEN 8/27/2017

I.S. EN 16798-5-1:2017Energy performance of buildings - Ventilation for buildings - Part 5-1:Calculation methods for energy requirements of ventilation and air conditioningsystems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distributi..

CEN 6/18/2017

I.S. EN 16798-5-2:2017Energy performance of buildings - Ventilation for buildings - Part 5-2:Calculation methods for energy requirements of ventilation systems (ModulesM5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation

CEN 9/4/2017

I.S. EN 16798-7:2017Energy performance of buildings - Ventilation for buildings - Part 7: Calculationmethods for the determination of air flow rates in buildings including infiltration(Modules M5-5)

CEN 7/2/2017

I.S. EN 16798-9:2017Energy performance of buildings - Ventilation for buildings - Part 9: Calculationmethods for energy requirements of cooling systems (Modules M4-1, M4-4,M4-9) - General

CEN 7/2/2017

I.S. EN 16798-13:2017Energy performance of buildings - Ventilation for buildings - Part 13: Calculationof cooling systems (Module M4-8) - Generation CEN 7/2/2017

I.S. EN 16798-15:2017Energy performance of buildings - Ventilation for buildings - Part 15: Calculationof cooling systems (Module M4-7) - Storage CEN 7/2/2017

I.S. EN 16798-17:2017Energy performance of buildings - Ventilation for buildings - Part 17: Guidelinesfor inspection of ventilation and air conditioning systems (Module M4-11,M5-11, M6-11, M7-11)

CEN 6/25/2017

I.S. EN 16809-2:2017Thermal insulation products of buildings - In-situ formed products from loose-fillexpanded polystyrene (EPS) beads and bonded expanded polystyrene beads -Part 2: Specification for the bonded and loose-fill products after installation

CEN 1/30/2017

I.S. EN 16810:2017Resilient, textile and laminate floor coverings - Environmental productdeclarations - Product category rules CEN 6/4/2017

I.S. EN 16820:2017Rubber and plastics hoses and hose assemblies for use in the pharmaceuticaland biotechnological industry - Bonded elastomeric hoses with or without alining

CEN 7/2/2017

I.S. EN 16821:2017Rubber and plastics hoses and hose assemblies for use in the pharmaceuticaland biotechnological industry - Silicone rubber hoses CEN 7/2/2017

I.S. EN 16830:2017Safety and control devices for burners and appliances burning gaseous or liquidfuels - Control functions in electronic systems - Temperature Control function CEN 3/24/2017

I.S. EN 16839:2017 Railway applications - Rolling stock - Head stock layout CEN 10/29/2017

I.S. EN 16840:2017Inland navigation vessels - Electrical shore connection, three-phase current 400V, 50 Hz, at least 250 A CEN 4/2/2017

I.S. EN 16844:2017 Aesthetic medicine services - Non-surgical medical treatments CEN 8/13/2017

I.S. EN 16845-1:2017Photocatalysis - Anti-soiling chemical activity using adsorbed organics undersolid/solid conditions - Part 1: Dyes on porous surfaces CEN 3/24/2017

I.S. EN 16846-1:2017Photocatalysis - Measurement of efficiency of photocatalytic devices used forthe elimination of VOC and odour in indoor air in active mode - Part 1: Batchmode test method with a closed chamber

CEN 3/24/2017

I.S. EN 16851:2017 Cranes - Light crane systems CEN 2/12/2017

I.S. EN 16852:2017Foodstuffs - Determination of ethyl carbamate in stone fruit spirits, fruit marcspirits and other spirit drinks - GC-MS method CEN 5/28/2017

I.S. EN 16853:2017Conservation of cultural heritage - Conservation process - Decision making,planning and implementation CEN 5/14/2017

I.S. EN 16855-1:2017Walk-in cold rooms - Definition, thermal insulation performance and testmethods - Part 1: Prefabricated cold room kits CEN 1/30/2017

I.S. EN 16857:2017Foodstuffs - Determination of benzene in soft drinks, other beverages andvegetable-based infant foods by headspace gas chromatography massspectrometry (HS-GC-MS)

CEN 5/21/2017

I.S. EN 16858:2017 Foodstuffs - Determination of melamine and cyanuric acid in foodstuffs by liquidchromatography and tandem mass spectrometry (LC-MS/MS)

CEN 6/11/2017




Foodstuffs - Determination of benzene in soft drinks, other beverages andvegetable-based infant foods by headspace gas chromatography massspectrometry (HS-GC-MS) CEN 5/21/2017

I.S. EN 16858:2017Foodstuffs - Determination of melamine and cyanuric acid in foodstuffs by liquidchromatography and tandem mass spectrometry (LC-MS/MS) CEN 6/11/2017

I.S. EN 16859:2017Water quality - Guidance standard on monitoring freshwater pearl mussel(Margaritifera margaritifera) populations and their environment CEN 3/6/2017

I.S. EN 16864:2017 Building hardware - Mechatronic padlocks - Requirements and test methods CEN 10/9/2017

I.S. EN 16866:2017Metallic and other inorganic coatings - Simultaneous thickness and electrodepotential determination of individual layers in multilayer nickel deposits (STEPtest)

CEN 11/26/2017

I.S. EN 16869:2017 Design/construction of Via Ferratas CEN 11/29/2017

I.S. EN 16870:2017Water quality - Guidance standard on determining the degree of modification oflake hydromorphology CEN 3/6/2017

I.S. EN 16883:2017Conservation of cultural heritage - Guidelines for improving the energyperformance of historic buildings CEN 6/4/2017

I.S. EN 16887:2017Leather - Environmental footprint - Product Category Rules (PCR) - Carbonfootprints CEN 4/9/2017

I.S. EN 16890:2017Children's furniture - Mattresses for cots and cribs - Safety requirements andtest methods CEN 5/21/2017

I.S. EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods CEN 4/2/2017

I.S. EN 16901:2016 Ice-cream freezers - Classification, requirements and test conditions CEN 1/1/2017

I.S. EN 16902:2016 Commercial beverage coolers - Classification, requirements and test conditions CEN 1/1/2017

I.S. EN 16905-1:2017 Gas-fired endothermic engine driven heat pumps - Part 1: Terms and definitionsCEN 3/26/2017

I.S. EN 16905-3:2017 Gas-fired endothermic engine driven heat pumps - Part 3: Test conditions CEN 3/26/2017

I.S. EN 16905-4:2017 Gas-fired endothermic engine driven heat pumps - Part 4: Test methods CEN 3/26/2017

I.S. EN 16905-5:2017Gas-fired endothermic engine driven heat pumps - Part 5: Calculation ofseasonal performances in heating and cooling mode CEN 3/26/2017

I.S. EN 16906:2017Liquid petroleum products - Determination of the ignition quality of diesel fuels -BASF engine method CEN 9/10/2017

I.S. EN 16908:2017Cement and building lime - Environmental product declarations - Productcategory rules complementary to EN 15804 CEN 2/20/2017

I.S. EN 16909:2017Ambient air - Measurement of elemental carbon (EC) and organic carbon (OC)collected on filters CEN 3/24/2017

I.S. EN 16913:2017Ambient air - Standard method for measurement of NO3Â̄, SO4Â²Â̄, ClÂ̄,NH4+, Na+, K+, MgÂ²+, CaÂ²+ in PM2,5 as deposited on filters CEN 6/25/2017

I.S. EN 16914:2017Aluminium and aluminium alloys - Hot-rolled armour plates in weldablealuminium alloy - Technical delivery conditions CEN 3/26/2017

I.S. EN 16922:2017Railway applications - Ground based services - Vehicle waste water dischargeequipment CEN 10/23/2017

I.S. EN 16923:2017Foodstuffs - Determination of T-2 toxin and HT-2 toxin in cereals and cerealproducts for infants and young children by LC-MS/MS after SPE cleanup CEN 6/11/2017

I.S. EN 16924:2017Foodstuffs - Determination of zearalenone in edible vegetable oils by LC-FLD orLC-MS/MS CEN 6/11/2017

I.S. EN 16927:2017Mini-pools - Specific requirements including safety and test methods formini-pools CEN 3/24/2017

I.S. EN 16930:2017Animal feeding stuffs: Methods of sampling and analysis - Determination ofcarbadox and olaquindox by HPLC/UV CEN 8/13/2017

I.S. EN 16931-1:2017Electronic invoicing - Part 1: Semantic data model of the core elements of anelectronic invoice CEN 7/16/2017

I.S. EN 16933-2:2017 Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design CEN 10/15/2017

I.S. EN 16934:2017Automotive fuels and fat and oil derivates - Determination of steryl glycosides infatty acid methyl esters (FAME) - Method by GC-MS with prior purification bySPE

CEN 8/27/2017

I.S. EN 16935:2017Bio-based products - Requirements for Business-to-Consumer communicationand claims CEN 5/28/2017

I.S. EN 16936:2017Animal feeding stuffs: Methods of sampling and analysis - Screening on theantibiotics tylosin, virginiamycin, spiramycin, bacitracin-zinc and avoparcin atsub-additive levels in compound feed by a microbiological plate test

CEN 5/28/2017

I.S. EN 16939:2017Animal feeding stuffs: Methods of sampling and analysis - Detection of tylosin,spiramycin and virginiamycin - Thin Layer Chromatography and bioautography CEN 8/27/2017

I.S. EN 16943:2017Foodstuffs - Determination of calcium, copper, iron, magnesium, manganese,phosphorus, potassium, sodium, sulfur and zinc by ICP-OES CEN 5/28/2017

I.S. EN 16944:2017 Agricultural machinery and tractors - Standardized access to repair andmaintenance information (RMI) - Requirements

CEN 10/15/2017



Reference Title En Origin Body Publication D..I.S. EN 16943:2017Foodstuffs - Determination of calcium, copper, iron, magnesium, manganese,phosphorus, potassium, sodium, sulfur and zinc by ICP-OES CEN 5/28/2017

I.S. EN 16944:2017Agricultural machinery and tractors - Standardized access to repair andmaintenance information (RMI) - Requirements CEN 10/15/2017

I.S. EN 16946-1:2017Energy Performance of Buildings - Inspection of Automation, Controls andTechnical Building Management - Part 1: Module M10-11 CEN 5/7/2017

I.S. EN 16947-1:2017Energy Performance of Buildings - Building Management System - Part 1:Module M10-12 CEN 5/21/2017

I.S. EN 16948:2017Child protective products - Consumer fitted child resistant locking devices forcupboards and drawers - Safety requirements and test methods CEN 7/23/2017

I.S. EN 16955:2017Hardware for furniture - Tapered pressure tubes for self-supporting gas springsfor the height adjustment of seating - Test methods and requirements forstrength and durability

CEN 4/30/2017

I.S. EN 16956:2017Cosmetics - Analytical methods - HPLC/UV method for the identification andassay of hydroquinone, ethers of hydroquinone and corticosteroids in skinwhitening cosmetic products

CEN 10/15/2017

I.S. EN 16967:2017Animal feeding stuffs: Methods of sampling and analysis - Predictive equationsfor metabolizable energy in feed materials and compound feed (pet food) forcats and dogs including dietetic food

CEN 8/13/2017

I.S. EN 16973:2017 Road vehicles for combined transport - Semitrailer - Vertical transhipment CEN 12/3/2017

I.S. EN 16992:2017 Competency for Customs Representatives CEN 2/12/2017

I.S. EN 16995:2017Foodstuffs - Vegetable oils and foodstuff on basis of vegetable oils -Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oilaromatic hydrocarbons (MOAH) with on-line HPLC-GC-FID analysis

CEN 7/2/2017

I.S. EN 16997:2017Liquid petroleum products - Determination of the sulfur content in Ethanol (E85)automotive fuel- Wavelength dispersive X-ray fluorescence spectrometricmethod

CEN 8/27/2017

I.S. EN 17007:2017 Maintenance process and associated indicators CEN 11/5/2017

I.S. EN 17050:2017Animal feeding stuffs: Methods of sampling and analysis - Determination ofiodine in animal feed by ICP-MS CEN 9/24/2017

I.S. EN 50052:2016High-voltage switchgear and controlgear - Gas-filled cast aluminium alloyenclosures CENELEC 1/23/2017

I.S. EN 50090-3-4:2017Home and Building Electronic Systems (HBES) - Part 3-4: Secure ApplicationLayer, Secure Service, Secure configuration and security Resources CENELEC 9/12/2017

I.S. EN 50090-6-1:2017Home and Building Electronic Systems (HBES) - Part 6-1: Interfaces -Webservice interface CENELEC 9/19/2017

I.S. EN 50121-1:2017 Railway applications - Electromagnetic compatibility - Part 1: General CENELEC 1/31/2017

I.S. EN 50121-2:2017Railway applications - Electromagnetic compatibility - Part 2: Emission of thewhole railway system to the outside world CENELEC 1/31/2017

I.S. EN 50121-3-1:2017Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock -Train and complete vehicle CENELEC 1/31/2017

I.S. EN 50121-3-2:2016Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock -Apparatus CENELEC 1/16/2017

I.S. EN 50121-4:2016Railway applications - Electromagnetic compatibility - Part 4: Emission andimmunity of the signalling and telecommunications apparatus CENELEC 1/16/2017

I.S. EN 50121-5:2017Railway applications - Electromagnetic compatibility - Part 5: Emission andimmunity of fixed power supply installations and apparatus CENELEC 3/28/2017

I.S. EN 50122-1:2011/A4:2017Railway applications - Fixed installations - Electrical safety, earthing and thereturn circuit - Part 1: Protective provisions against electric shock CENELEC 2/7/2017

I.S. EN 50124-1:2017Railway applications - Insulation coordination - Part 1: Basic requirements -Clearances and creepage distances for all electrical and electronic equipment CENELEC 3/21/2017

I.S. EN 50124-2:2017Railway applications - Insulation coordination - Part 2: Overvoltages and relatedprotection CENELEC 3/21/2017

I.S. EN 50126-1:2017Railway Applications - The Specification and Demonstration of Reliability,Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process CENELEC 11/1/2017

I.S. EN 50126-2:2017Railway Applications - The Specification and Demonstration of Reliability,Availability, Maintainability and Safety (RAMS) - Part 2: Systems Approach toSafety

CENELEC 11/1/2017

I.S. EN 50131-1:2006/A2:2017 Alarm systems - Intrusion and hold-up systems - Part 1: System requirements CENELEC 6/13/2017

I.S. EN 50131-2-2:2017Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors -Passive infrared detectors CENELEC 12/5/2017

I.S. EN 50131-2-8:2016Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors -Shock detectors CENELEC 1/23/2017

I.S. EN 50131-5-3:2017Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnectionsequipment using radio frequency techniques CENELEC 4/4/2017

I.S. EN 50131-6:2017 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies CENELEC 11/14/2017

I.S. EN 50134-2:2017 Alarm systems - Social alarm systems - Part 2: Trigger devices CENELEC 11/28/2017

I.S. EN 50134-7:2017 Alarm systems - Social alarm systems - Part 7: Application guidelines CENELEC 3/14/2017



Reference Title En Origin Body Publication D..I.S. EN 50134-2:2017 Alarm systems - Social alarm systems - Part 2: Trigger devices CENELEC 11/28/2017

I.S. EN 50134-7:2017 Alarm systems - Social alarm systems - Part 7: Application guidelines CENELEC 3/14/2017

I.S. EN 50152-3-1:2017Railway applications - Fixed installations - Particular requirements for a.c.switchgear - Part 3-1: Measurement, control and protection devices for specificuse in a.c. traction systems - Devices

CENELEC 3/1/2017

I.S. EN 50153:2014/A1:2017Railway applications - Rolling stock - Protective provisions relating to electricalhazards CENELEC 8/22/2017

I.S. EN 50155:2017 Railway applications - Rolling stock - Electronic equipment CENELEC 11/1/2017

I.S. EN 50174-3:2013/A1:2017Information technology - Cabling installation - Part 3: Installation planning andpractices outside buildings CENELEC 5/30/2017

I.S. EN 50180-3:2015/A1:2017Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filledtransformers - Part 3: Requirements for bushing fixations CENELEC 7/11/2017

I.S. EN 50193-2-2:2016Electric instantaneous water heaters - Part 2-2: Performance requirements -Single point of use electric instantaneous showers - Efficiency CENELEC 1/16/2017

I.S. EN 50288-12-1:2017Multi-element metallic cables used in analogue and digital communications andcontrol - Part 12-1: Sectional specification for screened cables characterisedfrom 1 MHz up to 2 000 MHz - Horizontal and building backbone cables

CENELEC 9/12/2017

I.S. EN 50289-1-1:2017Communication cables - Specifications for test methods - Part 1-1: Electrical testmethods - General requirements CENELEC 4/4/2017

I.S. EN 50289-1-8:2017Communication cables - Specifications for test methods - Part 1-8: Electrical testmethods - Attenuation CENELEC 4/4/2017

I.S. EN 50289-1-9:2017Communication cables - Specifications for test methods - Part 1-9: Electrical testmethods - Unbalance attenuation (transverse conversion loss TCL transverseconversion transfer loss TCTL)

CENELEC 4/4/2017

I.S. EN 50289-1-11:2016Communication cables - Specifications for test methods - Part 1-11: Electricaltest methods - Characteristic impedance, input impedance, return loss CENELEC 1/23/2017

I.S. EN 50332-3:2017Sound system equipment: headphones and earphones associated with personalmusic players - Maximum sound pressure level measurement methodology -Part 3: Measurement method for sound dose management

CENELEC 3/1/2017

I.S. EN 50341-2-5:2017Overhead electrical lines exceeding AC 1 kV â€“ Part 2-5: National NormativeAspects (NNA) for DENMARK (based on EN 50341-1:2012) CENELEC 3/14/2017

I.S. EN 50341-2-6:2017Overhead electrical lines exceeding AC 1 kV - Part 2-6: National NormativeAspects (NNA) for SPAIN (based on EN 50341-1:2012) CENELEC 3/14/2017

I.S. EN 50341-2-8:2017Overhead electrical lines exceeding AC 1 kV - Part 2-8: National NormativeAspects (NNA) for France (based on EN 50341-1:2012) CENELEC 10/24/2017

I.S. EN 50341-2-9:2017Overhead electrical lines exceeding AC 1 kV - Part 2-9: National NormativeAspects (NNA) for Great Britain and Northern Ireland (based on EN50341-1:2012)

CENELEC 5/23/2017

I.S. EN 50341-2-13:2017Overhead electrical lines exceeding AC 1 kV - Part 2-13: National NormativeAspects (NNA) for ITALY (based on EN 50341-1:2012) CENELEC 2/7/2017

I.S. EN 50341-2-13:2017/A1:2017Overhead electrical lines exceeding AC 1 kV - Part 2-13: National NormativeAspects (NNA) for ITALY (based on EN 50341-1:2012) CENELEC 7/11/2017

I.S. EN 50343:2014/A1:2017 Railway applications - Rolling stock - Rules for installation of cabling CENELEC 11/28/2017

I.S. EN 50360:2017Product standard to demonstrate the compliance of wireless communicationdevices, with the basic restrictions and exposure limit values related to humanexposure to electromagnetic fields in the frequency range from 300 MHz to 6 ..

CENELEC 10/24/2017

I.S. EN 50380:2017 Marking and documentation requirements for Photovoltaic Modules CENELEC 9/19/2017

I.S. EN 50385:2017Product standard to demonstrate the compliance of base station equipment withradiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz),when placed on the market

CENELEC 10/24/2017

I.S. EN 50398-1:2017Alarm systems - Combined and integrated alarm systems - Part 1: Generalrequirements CENELEC 9/5/2017

I.S. EN 50401:2017Product standard to demonstrate the compliance of base station equipment withradiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz),when put into service

CENELEC 10/24/2017

I.S. EN 50402:2017Electrical apparatus for the detection and measurement of combustible or toxicgases or vapours or of oxygen - Requirements on the functional safety of gasdetection systems

CENELEC 4/4/2017

I.S. EN 50436-3:2016Alcohol interlocks - Test methods and performance requirements - Part 3:Guidance for authorities, decision makers, purchasers and users CENELEC 1/16/2017

I.S. EN 50436-7:2016Alcohol interlocks - Test methods and performance requirements - Part 7:Installation document CENELEC 1/16/2017

I.S. EN 50463-1:2017 Railway applications - Energy measurement on board trains - Part 1: General CENELEC 10/24/2017

I.S. EN 50463-2:2017Railway applications - Energy measurement on board trains - Part 2: Energymeasuring CENELEC 10/24/2017

I.S. EN 50463-3:2017Railway applications - Energy measurement on board trains - Part 3: Datahandling CENELEC 10/24/2017

I.S. EN 50463-4:2017Railway applications - Energy measurement on board trains - Part 4:Communication CENELEC 10/24/2017

I.S. EN 50463-5:2017Railway applications - Energy measurement on board trains - Part 5: Conformityassessment CENELEC 10/24/2017

I.S. EN 50566:2017 Product standard to demonstrate the compliance of wireless communicationdevices with the basic restrictions and exposure limit values related to humanexposure to electromagnetic fields in the frequency range from 30 MHz to 6 G..

CENELEC 10/24/2017



Reference Title En Origin Body Publication D..I.S. EN 50463-5:2017Railway applications - Energy measurement on board trains - Part 5: Conformityassessment CENELEC 10/24/2017

I.S. EN 50566:2017Product standard to demonstrate the compliance of wireless communicationdevices with the basic restrictions and exposure limit values related to humanexposure to electromagnetic fields in the frequency range from 30 MHz to 6 G..

CENELEC 10/24/2017

I.S. EN 50588-1:2017Medium power transformers 50 Hz, with highest voltage for equipment notexceeding 36 kV - Part 1: General requirements CENELEC 10/3/2017

I.S. EN 50593:2017Electric dishwashers for commercial use - Test methods for measuring theperformance CENELEC 3/14/2017

I.S. EN 50600-4-1:2016Information technology - Data centre facilities and infrastructures - Part 4-1:Overview of and general requirements for key performance indicators CENELEC 1/16/2017

I.S. EN 50600-4-2:2016Information technology - Data centre facilities and infrastructures - Part 4-2:Power Usage Effectiveness CENELEC 1/16/2017

I.S. EN 50600-4-2:2016/AC:2017-02Information technology - Data centre facilities and infrastructures - Part 4-2:Power Usage Effectiveness CENELEC 3/7/2017

I.S. EN 50600-4-3:2016Information technology - Data centre facilities and infrastructures - Part 4-3:Renewable Energy Factor CENELEC 1/16/2017

I.S. EN 50620:2017 Electric cables - Charging cables for electric vehicles CENELEC 5/30/2017

I.S. EN 50625-2-3:2017Collection, logistics & treatment requirements for WEEE - Part 2-3: Treatmentrequirements for temperature exchange equipment and other WEEE containingVFC and/or VHC

CENELEC 8/15/2017

I.S. EN 50625-2-4:2017Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatmentrequirements for photovoltaic panels CENELEC 12/5/2017

I.S. EN 50631-1:2017Household appliances network and grid connectivity - Part 1: GeneralRequirements, Generic Data Modelling and Neutral Messages CENELEC 12/26/2017

I.S. EN 50632-3-3:2017Electric motor-operated tools - Dust measurement procedure - Part 3-3:Particular requirements for transportable planers and thicknessers CENELEC 1/31/2017

I.S. EN 50637:2017Medical electrical equipment - Particular requirements for the basic safety andessential performance of medical beds for children CENELEC 12/5/2017

I.S. EN 50645:2017 Ecodesign requirements for small power transformers CENELEC 11/14/2017

I.S. EN 50647:2017Basic standard for the evaluation of workers' exposure to electric and magneticfields from equipment and installations for the production, transmission anddistribution of electricity

CENELEC 6/20/2017

I.S. EN 50655-1:2017Electric cables - Accessories - Material characterization - Part 1: Fingerprintingfor resinous compounds CENELEC 12/12/2017

I.S. EN 50655-2:2017Electric cables - Accessories - Material characterization - Part 2: Fingerprintingfor heat shrinkable components for low and medium voltage applications up to20,8/36 (42) kV

CENELEC 12/12/2017

I.S. EN 50655-3:2017Electric cables - Accessories - Material characterization - Part 3: Fingerprintingfor cold shrinkable components for low and medium voltage applications up to20,8/36 (42) kV

CENELEC 12/12/2017

I.S. EN 50657:2017Railways Applications - Rolling stock applications - Software on Board RollingStock CENELEC 8/29/2017

I.S. EN 50663:2017Generic standard for assessment of low power electronic and electricalequipment related to human exposure restrictions for electromagnetic fields (10MHz - 300 GHz)

CENELEC 11/14/2017

I.S. EN 50664:2017Generic standard to demonstrate the compliance of equipment used by workerswith limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when putinto service or in situ

CENELEC 11/28/2017

I.S. EN 50665:2017Generic standard for assessment of electronic and electrical equipment relatedto human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) CENELEC 11/28/2017

I.S. EN 50667:2016Information technology - Automated infrastructure management (AIM) systems- Requirements, data exchange and applications CENELEC 1/16/2017

I.S. EN 50672:2017 Ecodesign requirements for computers and computer servers CENELEC 12/5/2017

I.S. EN 50849:2017 Sound systems for emergency purposes CENELEC 3/21/2017

I.S. EN 55011:2016/A1:2017Industrial, scientific and medical equipment - Radio-frequency disturbancecharacteristics - Limits and methods of measurement CENELEC 5/9/2017

I.S. EN 55014-1:2017Electromagnetic compatibility - Requirements for household appliances, electrictools and similar apparatus - Part 1: Emission CENELEC 5/16/2017

I.S. EN 55016-1-4:2010/A2:2017Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-4: Radio disturbance and immunity measuring apparatus -Antennas and test sites for radiated disturbance measurements

CENELEC 7/4/2017

I.S. EN 55016-1-5:2015/A1:2017Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-5: Radio disturbance and immunity measuring apparatus -Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CENELEC 6/13/2017

I.S. EN 55016-1-6:2015/A1:2017Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-6: Radio disturbance and immunity measuring apparatus -EMC antenna calibration

CENELEC 6/13/2017

I.S. EN 55016-2-1:2014/A1:2017Specification for radio disturbance and immunity measuring apparatus andmethods - Part 2-1: Methods of measurement of disturbances and immunity -Conducted disturbance measurements

CENELEC 11/14/2017

I.S. EN 55016-2-3:2017Specification for radio disturbance and immunity measuring apparatus andmethods - Part 2-3: Methods of measurement of disturbances and immunity -Radiated disturbance measurements

CENELEC 5/16/2017

I.S. EN 55025:2017Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protection ofon-board receivers

CENELEC 3/7/2017

I.S. EN 55025:2017/AC:2017-11 Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protection ofon-board receivers

CENELEC 12/12/2017




Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protection ofon-board receivers CENELEC 3/7/2017

I.S. EN 55025:2017/AC:2017-11Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protection ofon-board receivers

CENELEC 12/12/2017

I.S. EN 55035:2017Electromagnetic compatibility of multimedia equipment - Immunityrequirements CENELEC 8/15/2017

I.S. EN 60034-12:2017Rotating electrical machines - Part 12: Starting performance of single-speedthree-phase cage induction motors CENELEC 7/4/2017

I.S. EN 60034-18-42:2017Rotating electrical machines - Part 18-42: Partial discharge resistant electricalinsulation systems (Type II) used in rotating electrical machines fed fromvoltage converters - Qualification tests

CENELEC 6/27/2017

I.S. EN 60051-1:2017Direct acting indicating analogue electrical measuring instruments and theiraccessories - Part 1: Definitions and general requirements common to all parts CENELEC 5/16/2017

I.S. EN 60061-1:1993/A55:2017Lamp caps and holders together with gauges for the control ofinterchangeability and safety - Part 1: Lamp caps CENELEC 4/18/2017

I.S. EN 60061-1:1993/A56:2017Lamp caps and holders together with gauges for the control ofinterchangeability and safety - Part 1: Lamp caps CENELEC 9/12/2017

I.S. EN60061-1:1993/A56:2017/AC:2017-11

Lamp caps and holders together with gauges for the control ofinterchangeability and safety - Part 1: Lamp caps CENELEC 12/12/2017

I.S. EN 60061-2:1993/A52:2017Lamp caps and holders together with gauges for the control ofinterchangeability and safety - Part 2: Lampholders CENELEC 9/12/2017

I.S. EN 60061-3:1993/A53:2017Lamp caps and holders together with gauges for the control ofinterchangeability and safety - Part 3: Gauges CENELEC 8/15/2017

I.S. EN 60061-4:1992/A15:2017Lamp caps and holders together with gauges for the control ofinterchangeability and safety - Part 4: Guidelines and general information CENELEC 9/12/2017

I.S. EN 60062:2016/AC:2016-12 Marking codes for resistors and capacitors CENELEC 1/23/2017

I.S. EN 60065:2014/A11:2017 Audio, video and similar electronic apparatus - Safety requirements CENELEC 2/7/2017

I.S. EN 60065:2014/AC:2017-01 Audio, video and similar electronic apparatus - Safety requirements CENELEC 2/7/2017

I.S. EN 60068-2-18:2017 Environmental testing - Part 2-18: Tests â€“ Test R and guidance: Water CENELEC 7/4/2017

I.S. EN 60068-2-69:2017Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing ofelectronic components and printed boards by the wetting balance (forcemeasurement) method

CENELEC 6/20/2017

I.S. EN 60077-1:2017Railway applications - Electric equipment for rolling stock - Part 1: Generalservice conditions and general rules CENELEC 12/12/2017

I.S. EN 60077-2:2017Railway applications - Electric equipment for rolling stock - Part 2:Electrotechnical components - General rules CENELEC 12/12/2017

I.S. EN 60079-13:2017Explosive atmospheres - Part 13: Equipment protection by pressurized room "p"and artificially ventilated room "v" CENELEC 10/24/2017

I.S. EN 60079-18:2015/A1:2017 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" CENELEC 12/26/2017

I.S. EN 60079-29-1:2016Explosive atmospheres - Part 29-1: Gas detectors - Performance requirementsof detectors for flammable gases CENELEC 1/16/2017

I.S. EN 60079-30-1:2017Explosive atmospheres - Part 30-1: Electrical resistance trace heating - Generaland testing requirements CENELEC 4/25/2017

I.S. EN 60079-30-2:2017Explosive atmospheres - Part 30-2: Electrical resistance trace heating -Application guide for design, installation and maintenance CENELEC 7/25/2017

I.S. EN 60081:1998/A6:2017 Double-capped fluorescent lamps - Performance specifications CENELEC 12/3/2017

I.S. EN 60127-5:2017Miniature fuses - Part 5: Guidelines for quality assessment of miniaturefuse-links CENELEC 3/1/2017

I.S. EN 60137:2017 Insulated bushings for alternating voltages above 1 000 V CENELEC 12/5/2017

I.S. EN 60143-1:2015/AC:2017-05 Series capacitors for power systems - Part 1: General CENELEC 5/30/2017

I.S. EN 60153-1:2016/AC:2017-02Hollow metallic waveguides - Part 1: General requirements and measuringmethods CENELEC 3/1/2017

I.S. EN 60153-2:2016/AC:2017-02Hollow metallic waveguides - Part 2: Relevant specifications for ordinaryrectangular waveguides CENELEC 3/1/2017

I.S. EN 60153-4:2017Hollow metallic waveguides - Part 4: Relevant specifications for circularwaveguides CENELEC 12/26/2017

I.S. EN 60154-4:2017Flanges for waveguides - Part 4: Relevant specifications for flanges for circularwaveguides CENELEC 8/15/2017

I.S. EN 60205:2017 Calculation of the effective parameters of magnetic piece parts CENELEC 4/4/2017

I.S. EN 60286-1:2017Packaging of components for automatic handling - Part 1: Tape packaging ofcomponents with axial leads on continuous tapes CENELEC 12/5/2017

I.S. EN 60300-3-3:2017 Dependability management - Part 3-3: Application guide - Life cycle costing CENELEC 6/6/2017



Reference Title En Origin Body Publication D..I.S. EN 60286-1:2017Packaging of components for automatic handling - Part 1: Tape packaging ofcomponents with axial leads on continuous tapes CENELEC 12/5/2017

I.S. EN 60300-3-3:2017 Dependability management - Part 3-3: Application guide - Life cycle costing CENELEC 6/6/2017

I.S. EN 60312-1:2017Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods formeasuring the performance CENELEC 3/1/2017

I.S. EN 60317-0-7:2017Specifications for particular types of winding wires - Part 0-7: Generalrequirements - Fully insulated (FIW) zero-defect enamelled round copper wire CENELEC 12/5/2017

I.S. EN 60317-0-10:2017Specifications for particular types of winding wires - Part 0-10: Generalrequirements - Polyester glass-fibre wound fused, unvarnished, or resin orvarnish impregnated, bare or enamelled round copper wire

CENELEC 8/22/2017

I.S. EN 60317-56:2017Specifications for particular types of winding wires - Part 56: Solderable fullyinsulated (FIW) zero-defect polyurethane enamelled round copper wire, class180

CENELEC 11/14/2017

I.S. EN 60317-67:2017Specifications for particular types of winding wires - Part 67: Polyvinyl acetalenamelled rectangular aluminium wire, class 105 CENELEC 5/9/2017

I.S. EN 60317-68:2017Specifications for particular types of winding wires - Part 68: Polyvinyl acetalenamelled rectangular aluminium wire, class 120 CENELEC 5/9/2017

I.S. EN 60317-69:2017Specifications for particular types of winding wires - Part 69: Polyester orpolyesterimide overcoated with polyamide-imide enamelled rectangularaluminium wire, class 220

CENELEC 5/9/2017

I.S. EN 60317-70:2017Specifications for particular types of winding wires - Part 70: Polyesterglass-fibre wound fused, unvarnished or resin or varnish impregnated, bare orenamelled round copper wire, temperature index 155

CENELEC 8/22/2017

I.S. EN 60317-71:2017Specifications for particular types of winding wires - Part 71: Polyesterglass-fibre wound fused and resin or varnish impregnated, bare or enamelledround copper wire, temperature index 180

CENELEC 8/22/2017

I.S. EN 60317-72:2017Specifications for particular types of winding wires - Part 72: Polyesterglass-fibre wound fused, silicone resin or varnish impregnated, bare orenamelled round copper wire, temperature index 200

CENELEC 8/22/2017

I.S. EN 60335-1:2012/A12:2017Household and similar electrical appliances - Safety - Part 1: Generalrequirements CENELEC 5/30/2017

I.S. EN 60335-1:2012/A13:2017Household and similar electrical appliances - Safety - Part 1: Generalrequirements CENELEC 11/1/2017

I.S. EN 60335-2-86:2003/A12:2017Household and similar electrical appliances - Safety - Part 2-86: Particularrequirements for electric fishing machines CENELEC 9/12/2017

I.S. EN 60335-2-89:2010/A2:2017Household and similar electrical appliances - Safety - Part 2-89: Particularrequirements for commercial refrigerating appliances with an incorporated orremote refrigerant condensing unit or compressor

CENELEC 9/26/2017

I.S. EN 60384-8:2015/AC:2017-09Fixed capacitors for use in electronic equipment - Part 8: Sectional specification:Fixed capacitors of ceramic dielectric, Class 1 CENELEC 10/10/2017

I.S. EN 60384-15:2017Fixed capacitors for use in electronic equipment - Part 15: Sectionalspecification: Fixed tantalum capacitors with non-solid or solid electrolyte CENELEC 9/26/2017

I.S. EN 60384-24:2015/AC:2017-01Fixed capacitors for use in electronic equipment - Part 24: Sectionalspecification - Fixed tantalum electrolytic surface mount capacitors withconductive polymer solid electrolyte

CENELEC 2/7/2017

I.S. EN 60400:2017 Lampholders for tubular fluorescent lamps and starterholders CENELEC 10/10/2017

I.S. EN 60404-1:2017 Magnetic materials - Part 1: Classification CENELEC 2/14/2017

I.S. EN 60404-8-6:2017Magnetic materials - Part 8-6: Specifications for individual materials - Softmagnetic metallic materials CENELEC 5/9/2017

I.S. EN 60404-15:2012/A1:2017Magnetic materials - Part 15: Methods for the determination of the relativemagnetic permeability of feebly magnetic materials CENELEC 3/14/2017

I.S. EN 60444-8:2017Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surfacemounted quartz crystal units CENELEC 4/25/2017

I.S. EN 60445:2017Basic and safety principles for man-machine interface, marking andidentification - Identification of equipment terminals, conductor terminationsand conductors

CENELEC 12/12/2017

I.S. EN 60500:2017Underwater acoustics - Hydrophones - Properties of hydrophones in thefrequency range 1 Hz to 500 kHz CENELEC 8/15/2017

I.S. EN 60505:2011/AC:2017-03 Evaluation and qualification of electrical insulation systems CENELEC 4/11/2017

I.S. EN 60539-1:2016/AC:2017-09Directly heated negative temperature coefficient thermistors - Part 1: Genericspecification CENELEC 10/10/2017

I.S. EN 60598-1:2015/AC:2017-05 Luminaires - Part 1: General requirements and tests CENELEC 6/13/2017

I.S. EN 60598-2-20:2015/AC:2017-01 Luminaires - Part 2-20: Particular requirements - Lighting chains CENELEC 2/7/2017

I.S. EN 60598-2-21:2015/AC:2017-01 Luminaires - Part 2-21: Particular requirements - Rope lights CENELEC 2/7/2017

I.S. EN 60601-1-8:2007/A11:2017Medical electrical equipment - Part 1-8: General requirements for basic safetyand essential performance - Collateral Standard: General requirements, testsand guidance for alarm systems in medical electrical equipment and medical el..

CENELEC 3/28/2017

I.S. EN 60601-2-10:2015/A1:2016Medical electrical equipment - Part 2-10: Particular requirements for the basicsafety and essential performance of nerve and muscle stimulators CENELEC 1/23/2017

I.S. EN 60601-2-19:2009/A1:2016Medical electrical equipment - Part 2-19: Particular requirements for the basicsafety and essential performance of infant incubators CENELEC 1/23/2017

I.S. EN 60601-2-20:2009/A1:2016 Medical electrical equipment - Part 2-20: Particular requirements for the basicsafety and essential performance of infant transport incubators

CENELEC 1/23/2017



Reference Title En Origin Body Publication D..I.S. EN 60601-2-19:2009/A1:2016Medical electrical equipment - Part 2-19: Particular requirements for the basicsafety and essential performance of infant incubators CENELEC 1/23/2017

I.S. EN 60601-2-20:2009/A1:2016Medical electrical equipment - Part 2-20: Particular requirements for the basicsafety and essential performance of infant transport incubators CENELEC 1/23/2017

I.S. EN 60601-2-21:2009/A1:2016Medical electrical equipment - Part 2-21: Particular requirements for the basicsafety and essential performance of infant radiant warmers CENELEC 1/23/2017

I.S. EN 60601-2-50:2009/A1:2016Medical electrical equipment - Part 2-50: Particular requirements for the basicsafety and essential performance of infant phototherapy equipment CENELEC 1/23/2017

I.S. EN 60603-7-81:2016/AC:2017-07Connectors for electronic equipment - Part 7-81: Detail specification for 8-way,shielded, free and fixed connectors, for data transmissions with frequencies upto 2 000 MHz

CENELEC 8/8/2017

I.S. EN 60603-7-82:2016Connectors for electronic equipment - Part 7-82: Detail specification for 8-way,12 contacts, shielded, free and fixed connectors, for data transmission withfrequencies up to 2 000 MHz

CENELEC 1/16/2017

I.S. EN 60623:2017Secondary cells and batteries containing alkaline or other non-acid electrolytes -Vented nickel-cadmium prismatic rechargeable single cells CENELEC 5/23/2017

I.S. EN 60645-1:2017Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone andspeech audiometry CENELEC 10/24/2017

I.S. EN 60664-3:2017Insulation coordination for equipment within low-voltage systems - Part 3: Useof coating, potting or moulding for protection against pollution CENELEC 7/4/2017

I.S. EN 60674-2:2017 Specification for plastic films for electrical purposes - Part 2: Methods of test CENELEC 3/14/2017

I.S. EN 60674-3-8:2011/A1:2017Plastic films for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN)films used for electrical insulation

CENELEC 4/18/2017

I.S. EN 60679-1:2017Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1:Generic specification CENELEC 12/5/2017

I.S. EN 60684-3-247:2011/A1:2017Flexible insulating sleeving - Part 3: Specifications for individual types ofsleeving - Sheet 247: Heat-shrinkable polyolefin sleeving, dual wall, not flameretarded, thick and medium wall

CENELEC 4/4/2017

I.S. EN 60695-1-10:2017Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard ofelectrotechnical products - General guidelines CENELEC 3/21/2017

I.S. EN 60695-1-30:2017Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard ofelectrotechnical products - Preselection testing process - General guidelines CENELEC 6/13/2017

I.S. EN 60695-8-1:2017 Fire hazard testing - Part 8-1: Heat release - General guidance CENELEC 3/1/2017

I.S. EN 60695-8-2:2017Fire hazard testing - Part 8-2: Heat release - Summary and relevance of testmethods CENELEC 3/21/2017

I.S. EN 60695-11-2:2017Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame -Apparatus, confirmatory test arrangement and guidance CENELEC 10/24/2017

I.S. EN 60695-11-5:2017Fire hazard testing - Part 11-5: Test flames - Needle-flame test method -Apparatus, confirmatory test arrangement and guidance CENELEC 7/4/2017

I.S. EN 60700-1:2015/AC:2017-02Thyristor valves for high voltage direct current (HVDC) power transmission -Part 1: Electrical testing CENELEC 3/1/2017

I.S. EN 60700-2:2016/AC:2017-07Thyristor valves for high voltage direct current (HVDC) power transmission -Part 2: Terminology CENELEC 8/8/2017

I.S. EN 60704-2-13:2017Household and similar electrical appliances - Test code for the determination ofairborne acoustical noise - Part 2-13: Particular requirements for range hoodsand other cooking fume extractors

CENELEC 1/31/2017

I.S. EN 60715:2017Dimensions of low-voltage switchgear and controlgear - Standardized mountingon rails for mechanical support of switchgear, controlgear and accessories CENELEC 12/12/2017

I.S. EN 60728-11:2017Cable networks for television signals, sound signals and interactive services -Part 11: Safety CENELEC 6/13/2017

I.S. EN 60728-13-1:2017Cable networks for television signals, sound signals and interactive services -Part 13-1: Bandwidth expansion for broadcast signal over FTTH system CENELEC 11/28/2017

I.S. EN 60728-101:2017Cable networks for television signals, sound signals and interactive services -Part 101: System performance of forward paths loaded with digital channelsonly

CENELEC 6/6/2017

I.S. EN 60728-101:2017/AC:2017-07Cable networks for television signals, sound signals and interactive services -Part 101: System performance of forward paths loaded with digital channelsonly

CENELEC 7/25/2017

I.S. EN 60747-16-1:2002/A2:2017 Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers CENELEC 6/13/2017

I.S. EN 60747-16-3:2002/A2:2017Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequencyconverters CENELEC 12/26/2017

I.S. EN 60747-16-4:2004/A2:2017 Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches CENELEC 12/12/2017

I.S. EN 60749-3:2017Semiconductor devices - Mechanical and climatic test methods - Part 3: Externalvisual examination CENELEC 7/4/2017

I.S. EN 60749-4:2017Semiconductor devices - Mechanical and climatic test methods - Part 4: Dampheat, steady state, highly accelerated stress test (HAST) CENELEC 7/4/2017

I.S. EN 60749-5:2017Semiconductor devices - Mechanical and climatic test methods - Part 5:Steady-state temperature humidity bias life test CENELEC 7/25/2017

I.S. EN 60749-6:2017Semiconductor devices - Mechanical and climatic test methods - Part 6: Storageat high temperature CENELEC 7/4/2017

I.S. EN 60749-9:2017 Semiconductor devices - Mechanical and climatic test methods - Part 9:Permanence of marking

CENELEC 7/4/2017



Reference Title En Origin Body Publication D..I.S. EN 60749-6:2017Semiconductor devices - Mechanical and climatic test methods - Part 6: Storageat high temperature CENELEC 7/4/2017

I.S. EN 60749-9:2017Semiconductor devices - Mechanical and climatic test methods - Part 9:Permanence of marking CENELEC 7/4/2017

I.S. EN 60749-28:2017Semiconductor devices - Mechanical and climatic test methods - Part 28:Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) -device level

CENELEC 7/18/2017

I.S. EN 60749-43:2017Semiconductor devices - Mechanical and climatic test methods - Part 43:Guidelines for IC reliability qualification plans CENELEC 9/19/2017

I.S. EN 60780-323:2017 Nuclear facilities - Electrical equipment important to safety - Qualification CENELEC 11/1/2017

I.S. EN 60793-1-1:2017Optical fibres - Part 1-1: Measurement methods and test procedures - Generaland guidance CENELEC 5/2/2017

I.S. EN 60793-1-33:2017Optical fibres - Part 1-33: Measurement methods and test procedures - Stresscorrosion susceptibility CENELEC 12/12/2017

I.S. EN 60793-1-48:2017Optical fibres - Part 1-48: Measurement methods and test procedures -Polarization mode Dispersion CENELEC 12/26/2017

I.S. EN 60793-1-60:2017Optical fibres - Part 1-60: Measurement methods and test procedures - Beatlength CENELEC 6/6/2017

I.S. EN 60793-1-61:2017Optical fibres - Part 1-61: Measurement methods and test procedures -Polarization crosstalk CENELEC 6/6/2017

I.S. EN 60793-2-10:2017Optical fibres - Part 2-10: Product specifications - Sectional specification forcategory A1 multimode fibres CENELEC 11/28/2017

I.S. EN 60793-2-70:2017Optical fibres - Part 2-70: Product specifications - Sectional specification forpolarization-maintaining fibres CENELEC 6/6/2017

I.S. EN 60794-1-2:2017Optical fibre cables - Part 1-2: Generic specification - Basic optical cable testprocedures - General guidance CENELEC 4/11/2017

I.S. EN 60794-1-2:2017/AC:2017-07Optical fibre cables - Part 1-2: Generic specification - Basic optical cable testprocedures - General guidance CENELEC 7/25/2017

I.S. EN 60794-1-3:2017 Optical fibre cables - Part 1-3: Generic specification - Optical cable elements CENELEC 8/15/2017

I.S. EN 60794-2-22:2017Optical fibre cables - Part 2-22: Indoor cables - Detail specification formulti-simplex breakout optical cables to be terminated with connectors CENELEC 4/4/2017

I.S. EN 60794-2:2017 Optical fibre cables - Part 2: Indoor cables - Sectional specification CENELEC 11/14/2017

I.S. EN 60809:2015/A1:2017 Lamps for road vehicles - Dimensional, electrical and luminous requirements CENELEC 8/15/2017

I.S. EN 60810:2015/A1:2017 Lamps for road vehicles - Performance requirements CENELEC 6/20/2017

I.S. EN 60811-201:2012/A1:2017Electric and optical fibre cables - Test methods for non-metallic materials - Part201: General tests - Measurement of insulation thickness CENELEC 12/12/2017

I.S. EN 60811-202:2012/A1:2017Electric and optical fibre cables - Test methods for non-metallic materials - Part202: General tests - Measurement of thickness of non-metallic sheath CENELEC 12/12/2017

I.S. EN 60811-401:2012/A1:2017Electric and optical fibre cables - Test methods for non-metallic materials - Part401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven CENELEC 12/12/2017

I.S. EN 60811-410:2012/A1:2017Electric and optical fibre cables - Test methods for non-metallic materials - Part410: Miscellaneous tests - Test method for copper-catalyzed oxidativedegradation of polyolefin insulated conductors

CENELEC 12/12/2017

I.S. EN 60811-508:2012/A1:2017Electric and optical fibre cables - Test methods for non-metallic materials - Part508: Mechanical tests - Pressure test at high temperature for insulation andsheaths

CENELEC 12/12/2017

I.S. EN 60811-509:2012/A1:2017Electric and optical fibre cables - Test methods for non-metallic materials - Part509: Mechanical tests - Test for resistance of insulations and sheaths tocracking (heat shock test)

CENELEC 12/12/2017

I.S. EN 60811-511:2012/A1:2017Electric and optical fibre cables - Test methods for non-metallic materials - Part511: Mechanical tests - Measurement of the melt flow index of polyethylene andpolypropylene compounds

CENELEC 12/12/2017

I.S. EN 60825-1:2014/AC:2017-06 Safety of laser products - Part 1: Equipment classification and requirements CENELEC 7/18/2017

I.S. EN 60838-1:2017 Miscellaneous lampholders - Part 1: General requirements and tests CENELEC 5/16/2017

I.S. EN 60838-1:2017/A1:2017 Miscellaneous lampholders - Part 1: General requirements and tests CENELEC 8/22/2017

I.S. EN 60838-2-3:2017Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders fordouble-capped linear LED lamps CENELEC 5/16/2017

I.S. EN 60839-11-31:2017Alarm and electronic security systems - Part 11-31: Electronic access controlsystems - Core interoperability protocol based on Web services CENELEC 4/4/2017

I.S. EN 60839-11-32:2017Alarm and electronic security systems - Part 11-32: Electronic access controlsystems - Access control monitoring based on Web services CENELEC 4/4/2017

I.S. EN 60855-1:2017Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes androds of a circular cross-section CENELEC 3/1/2017

I.S. EN 60901:1996/A6:2017 Single-capped fluorescent lamps - Performance specifications CENELEC 10/17/2017

I.S. EN 60904-1-1:2017 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristicsof multi-junction photovoltaic (PV) devices

CENELEC 9/26/2017



Reference Title En Origin Body Publication D..I.S. EN 60901:1996/A6:2017 Single-capped fluorescent lamps - Performance specifications CENELEC 10/17/2017

I.S. EN 60904-1-1:2017Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristicsof multi-junction photovoltaic (PV) devices CENELEC 9/26/2017

I.S. EN 60904-8-1:2017Photovoltaic devices - Part 8-1: Measurement of spectral responsivity ofmulti-junction photovoltaic (PV) devices CENELEC 9/26/2017

I.S. EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers CENELEC 11/1/2017

I.S. EN 60947-5-1:2017Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices andswitching elements - Electromechanical control circuit devices CENELEC 12/31/2017

I.S. EN 60947-5-5:1997/A2:2017Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices andswitching elements - Electrical emergency stop device with mechanical latchingfunction

CENELEC 3/14/2017

I.S. EN 60950-22:2017Information technology equipment - Safety - Part 22: Equipment to be installedoutdoors CENELEC 5/2/2017

I.S. EN 60966-2-5:2017Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification forcable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000MHz, IEC 61169-2 connectors

CENELEC 3/7/2017

I.S. EN 60966-2-6:2017Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification forcable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000MHz, IEC 61169-24 connectors

CENELEC 3/7/2017

I.S. EN 61000-2-2:2002/A1:2017Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibilitylevels for low-frequency conducted disturbances and signalling in publiclow-voltage power supply systems

CENELEC 11/14/2017

I.S. EN 61000-4-5:2014/A1:2017Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurementtechniques - Surge immunity test CENELEC 12/12/2017

I.S. EN 61000-4-10:2017Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurementtechniques - Damped oscillatory magnetic field immunity test CENELEC 3/14/2017

I.S. EN 61000-4-11:2004/A1:2017Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurementtechniques - Voltage dips, short interruptions and voltage variations immunitytests

CENELEC 8/22/2017

I.S. EN 61000-4-12:2017Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurementtechniques - Ring wave immunity test CENELEC 11/14/2017

I.S. EN 61000-4-30:2015/AC:2017-01Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurementtechniques - Power quality measurement methods CENELEC 2/7/2017

I.S. EN 61000-4-31:2017Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurementtechniques - AC mains ports broadband conducted disturbance immunity test CENELEC 3/14/2017

I.S. EN 61000-4-39:2017Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurementtechniques - Radiated fields in close proximity - Immunity test CENELEC 6/27/2017

I.S. EN 61005:2017Radiation protection instrumentation - Neutron ambient dose equivalent (rate)meters CENELEC 2/14/2017

I.S. EN 61008-1:2012/A12:2017Residual current operated circuit-breakers without integral overcurrentprotection for household and similar uses (RCCBs) - Part 1: General rules CENELEC 4/4/2017

I.S. EN 61010-2-011:2017Safety requirements for electrical equipment for measurement, control, andlaboratory use - Part 2-011: Particular requirements for refrigerating equipmentCENELEC 5/9/2017

I.S. EN 61010-2-020:2017Safety requirements for electrical equipment for measurement, control, andlaboratory use - Part 2-020: Particular requirements for laboratory centrifuges CENELEC 5/16/2017

I.S. EN 61010-2-101:2017Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD)medical equipment

CENELEC 3/14/2017

I.S. EN 61010-2-202:2017Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-202: Particular requirements for electrically operatedvalve actuators

CENELEC 5/9/2017

I.S. EN 61057:2017 Live working - Insulating aerial devices for mounting on a chassis CENELEC 11/7/2017

I.S. EN 61076-2-113:2017Connectors for electronic equipment - Product requirements - Part 2-113:Circular connectors - Detail specification for connectors with M12 screw lockingwith power and signal contacts for data transmission with frequency up to 100..

CENELEC 6/20/2017

I.S. EN 61076-3-104:2017Connectors for electrical and electronic equipment - Product requirements - Part3-104: Detail specification for 8-way, shielded free and fixed connectors for datatransmissions with frequencies up to 2 000 MHz

CENELEC 10/17/2017

I.S. EN 61076-3-120:2016Connectors for electronic equipment - Product requirements - Part 3-120:Rectangular connectors - Detail specification for rewirable power connectorswith snap locking for rated voltage of 250 V d.c. and rated current of 30 A

CENELEC 1/16/2017

I.S. EN 61076-3-122:2017Connectors for electrical and electronic equipment - Product requirements - Part3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/Oand Gigabit Ethernet applications in harsh environments

CENELEC 10/10/2017

I.S. EN 61094-3:2016/AC:2017-01Electroacoustics - Measurement microphones - Part 3: Primary method forfree-field calibration of laboratory standard microphones by the reciprocitytechnique

CENELEC 2/7/2017

I.S. EN 61162-1:2016Maritime navigation and radiocommunication equipment and systems - Digitalinterfaces - Part 1: Single talker and multiple listeners CENELEC 1/23/2017

I.S. EN 61169-11:2017Radio-frequency connectors - Part 11: Sectional specification for RF coaxialconnectors with inner diameter of outer conductor 9,5 mm with threadedcoupling - Characteristic impedance 50 Î© (type 4,1-9,5)

CENELEC 7/4/2017

I.S. EN 61169-58:2016/AC:2017-09Radio-frequency connectors - Part 58: Sectional specification for RF coaxialconnectors with blind-mate coupling - Characteristic impedance 50 Î© (typeSBMA)

CENELEC 10/3/2017

I.S. EN 61169-59:2017Radio-frequency connectors -Part 59: Sectional specification for type L32-4 andL32-5 threaded multi-pin radio-frequency connectors CENELEC 10/10/2017

I.S. EN 61184:2017 Bayonet lampholders CENELEC 10/10/2017

I.S. EN 61188-7:2017 Printed boards and printed board assemblies - Design and use - Part 7:Electronic component zero orientation for CAD library construction

CENELEC 7/18/2017



Reference Title En Origin Body Publication D..I.S. EN 61184:2017 Bayonet lampholders CENELEC 10/10/2017

I.S. EN 61188-7:2017Printed boards and printed board assemblies - Design and use - Part 7:Electronic component zero orientation for CAD library construction CENELEC 7/18/2017

I.S. EN 61189-5-503:2017Test methods for electrical materials, printed board and other interconnectionstructures and assemblies - Part 5-503: General test method for materials andassemblies - Conductive anodic filaments (CAF) testing of circuit boards

CENELEC 8/29/2017

I.S. EN 61191-2:2017Printed board assemblies - Part 2: Sectional specification - Requirements forsurface mount soldered assemblies CENELEC 11/1/2017

I.S. EN 61191-3:2017Printed board assemblies - Part 3: Sectional specification - Requirements forthrough-hole mount soldered assemblies CENELEC 9/19/2017

I.S. EN 61191-4:2017Printed board assemblies - Part 4: Sectional specification - Requirements forterminal soldered assemblies CENELEC 11/14/2017

I.S. EN 61202-1:2017Fibre optic interconnecting devices and passive components - Fibre opticisolators - Part 1: Generic specification CENELEC 4/11/2017

I.S. EN 61215-1-2:2017Terrestrial photovoltaic (PV) modules - Design qualification and type approval -Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe)based photovoltaic (PV) modules

CENELEC 5/16/2017

I.S. EN 61215-1-3:2017Terrestrial photovoltaic (PV) modules - Design qualification and type approval -Part 1-3: Special requirements for testing of thin-film amorphous silicon basedphotovoltaic (PV) modules

CENELEC 5/23/2017

I.S. EN 61215-1-4:2017Terrestrial photovoltaic (PV) modules - Design qualification and type approval -Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 basedphotovoltaic (PV) modules

CENELEC 5/23/2017

I.S. EN 61215-2:2017Terrestrial photovoltaic (PV) modules - Design qualification and type approval -Part 2: Test procedures CENELEC 3/1/2017

I.S. EN 61215-2:2017/AC:2017-07Terrestrial photovoltaic (PV) modules - Design qualification and type approval -Part 2: Test procedures CENELEC 7/25/2017

I.S. EN 61240:2017Piezoelectric devices - Preparation of outline drawings of surface-mounteddevices (SMD) for frequency control and selection - General rules CENELEC 2/7/2017

I.S. EN 61242:1997/A13:2017 Electrical accessories - Cable reels for household and similar purposes CENELEC 4/18/2017

I.S. EN 61249-2-7:2002/AC:2005Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 5/17/2017

I.S. EN 61252:1995/A2:2017 Electroacoustics - Specifications for personal sound exposure meters CENELEC 7/25/2017

I.S. EN 61260-2:2016/A1:2017Electroacoustics - Octave-band and fractional-octave-band filters - Part 2:Pattern-evaluation tests CENELEC 7/25/2017

I.S. EN 61280-4-4:2017Fibre optic communication subsystem test procedures - Part 4-4: Cable plantsand links - Polarization mode dispersion measurement for installed links CENELEC 9/5/2017

I.S. EN 61290-4-1:2016Optical amplifiers - Test methods - Part 4-1: Gain transient parameters -Two-wavelength method CENELEC 1/16/2017

I.S. EN 61291-5-2:2017Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualificationfor optical fibre amplifiers CENELEC 6/20/2017

I.S. EN 61300-2-9:2017Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-9: Tests - Shock CENELEC 4/11/2017

I.S. EN 61300-2-55:2017Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-55: Tests - Strength of mounted adaptor CENELEC 6/27/2017

I.S. EN 61326-3-1:2017Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 3-1: Immunity requirements for safety-related systems andfor equipment intended to perform safety-related functions (functional safety) ..

CENELEC 8/15/2017

I.S. EN 61332:2017 Soft ferrite material classification CENELEC 3/7/2017

I.S. EN 61340-4-7:2017Electrostatics - Part 4-7: Standard test methods for specific applications -Ionization CENELEC 4/4/2017

I.S. EN 61340-5-1:2016/AC:2017-05Electrostatics - Part 5-1: Protection of electronic devices from electrostaticphenomena - General requirements CENELEC 6/13/2017

I.S. EN 61347-2-3:2011/A1:2017Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c.supplied electronic control gear for fluorescent lamps CENELEC 5/16/2017

I.S. EN 61347-2-13:2014/A1:2017Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. suppliedelectronic controlgear for LED modules CENELEC 5/16/2017

I.S. EN 61360-1:2017Standard data element types with associated classification scheme - Part 1:Definitions - Principles and methods CENELEC 12/19/2017

I.S. EN 61360-6:2017Standard data element types with associated classification scheme for electriccomponents - Part 6: IEC Common Data Dictionary (IEC CDD) quality guidelinesCENELEC 2/14/2017

I.S. EN 61373:2010/AC:2017 Railway applications - Rolling stock equipment - Shock and vibration tests CENELEC 10/10/2017

I.S. EN 61375-2-3:2015/A11:2017Electronic railway equipment - Train communication network (TCN) - Part 2-3:TCN communication profile CENELEC 3/28/2017

I.S. EN 61375-3-4:2014/A11:2017Electronic railway equipment - Train communication network (TCN) - Part 3-4:Ethernet Consist Network (ECN) CENELEC 3/28/2017

I.S. EN 61391-1:2006/A1:2017Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatialmeasurement systems and measurement of system point-spread functionresponse

CENELEC 12/19/2017

I.S. EN 61400-12-1:2017 Wind energy generation systems - Part 12-1: Power performance measurementof electricity producing wind turbines

CENELEC 6/20/2017



Reference Title En Origin Body Publication D..I.S. EN 61391-1:2006/A1:2017

Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatialmeasurement systems and measurement of system point-spread functionresponse CENELEC 12/19/2017

I.S. EN 61400-12-1:2017Wind energy generation systems - Part 12-1: Power performance measurementof electricity producing wind turbines CENELEC 6/20/2017

I.S. EN 61400-25-1:2017Wind energy generation systems - Part 25-1: Communications for monitoringand control of wind power plants - Overall description of principles and models CENELEC 12/19/2017

I.S. EN 61400-25-4:2017Wind energy generation systems - Part 25-4: Communications for monitoringand control of wind power plants - Mapping to communication profile CENELEC 3/21/2017

I.S. EN 61400-25-6:2017Wind energy generation systems - Part 25-6: Communications for monitoringand control of wind power plants - Logical node classes and data classes forcondition monitoring

CENELEC 4/25/2017

I.S. EN 61511-1:2017Functional safety - Safety instrumented systems for the process industry sector- Part 1: Framework, definitions, system, hardware and applicationprogramming Requirements

CENELEC 5/9/2017

I.S. EN 61511-1:2017/A1:2017Functional safety - Safety instrumented systems for the process industry sector- Normative (uon) - Part 1: Framework, definitions, system, hardware andsoftware requirements

CENELEC 12/12/2017

I.S. EN 61511-2:2017Functional safety - Safety instrumented systems for the process industry sector- Part 2: Guidelines for the application of IEC 61511-1 CENELEC 5/9/2017

I.S. EN 61511-3:2017Functional safety - Safety instrumented systems for the process industry sector- Part 3: Guidance for the determination of the required safety integrity levels CENELEC 5/9/2017

I.S. EN 61557-9:2015/AC:2017-02Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500V d.c. - Equipment for testing, measuring or monitoring of protective measures- Part 9: Equipment for insulation fault location in IT systems

CENELEC 2/21/2017

I.S. EN 61577-2:2017Radiation protection instrumentation - Radon and radon decay productmeasuring instruments - Part 2: Specific requirements for 222Rn and 220Rnmeasuring instruments

CENELEC 8/29/2017

I.S. EN 61587-1:2017Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC60297 series - Part 1: Environmental requirements, test set-up and safetyaspects for cabinets, racks, subracks and chassis under indoor condition use a..

CENELEC 5/9/2017

I.S. EN 61587-6:2017Mechanical structures for electrical and electronic equipment - Tests for IEC60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets CENELEC 8/22/2017

I.S. EN 61605:2017Fixed inductors for use in electronic and telecommunication equipment -Marking codes CENELEC 2/21/2017

I.S. EN 61643-351:2017Components for low-voltage surge protective devices - Part 351: Performancerequirements and test methods for telecommunications and signalling networksurge isolation transformers (SIT)

CENELEC 3/1/2017

I.S. EN 61672-2:2013/A1:2017 Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests CENELEC 7/25/2017

I.S. EN 61709:2017Electric components - Reliability - Reference conditions for failure rates andstress models for conversion CENELEC 6/6/2017

I.S. EN 61724-1:2017 Photovoltaic system performance - Part 1: Monitoring CENELEC 6/13/2017

I.S. EN 61745:2017End-face image analysis procedure for the calibration of optical fibre geometrytest sets CENELEC 11/7/2017

I.S. EN 61753-052-3:2016Fibre optic interconnecting devices and passive components - Performancestandard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator -Category U in uncontrolled environment

CENELEC 1/16/2017

I.S. EN 61753-052-6:2016Fibre optic interconnecting devices and passive components - Performancestandard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator -Category O in outside plant environment

CENELEC 1/16/2017

I.S. EN 61753-121-2:2017Fibre optic interconnecting devices and passive components - Performancestandard - Part 121-2: Simplex and duplex cords with single-mode fibre andcylindrical ferrule connectors for category C - Controlled environment

CENELEC 11/7/2017

I.S. EN 61754-32:2016Fibre optic interconnecting devices and passive components - Fibre opticconnector interfaces - Part 32: Type DiaLink connector family CENELEC 1/16/2017

I.S. EN 61754-34:2016Fibre optic interconnecting devices and passive components - Fibre opticconnector interfaces - Part 34: Type URM connector family CENELEC 1/16/2017

I.S. EN 61755-3-10:2017Fibre optic interconnecting devices and passive components - Connector opticalinterfaces - Part 3-10: Connector parameters of non-dispersion shifted singlemode physically contacting fibres - Non-angled, ferrule-less, bore alignment co..

CENELEC 4/11/2017

I.S. EN 61757-1-1:2017Fibre optic sensors â€“ Part 1-1: Strain measurement â€“ Strain sensors basedon fibre Bragg gratings CENELEC 3/7/2017

I.S. EN 61757-2-2:2017 Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing CENELEC 10/24/2017

I.S. EN 61784-3-2:2017Industrial communication networks - Profiles - Part 3-2: Functional safetyfieldbuses - Additional specifications for CPF 2 CENELEC 11/28/2017





I.S. EN 61784-3-18:2011/A1:2017Industrial communication networks - Profiles - Part 3-18: Functional safetyfieldbuses - Additional specifications for CPF 18 CENELEC 3/7/2017

I.S. EN 61784-3:2016/A1:2017Industrial communication networks - Profiles - Part 3: Functional safetyfieldbuses - General rules and profile definitions CENELEC 11/28/2017

I.S. EN 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Genericspecification for sensors and detectors

CENELEC 11/28/2017



Reference Title En Origin Body Publication D..I.S. EN 61784-3:2016/A1:2017Industrial communication networks - Profiles - Part 3: Functional safetyfieldbuses - General rules and profile definitions CENELEC 11/28/2017

I.S. EN 61788-22-1:2017Superconductivity - Part 22-1: Superconducting electronic devices - Genericspecification for sensors and detectors CENELEC 11/28/2017

I.S. EN 61800-5-1:2007/A1:2017Adjustable speed electrical power drive systems - Part 5-1: Safety requirements- Electrical, thermal and energy CENELEC 5/16/2017

I.S. EN 61800-5-2:2017Adjustable speed electrical power drive systems - Part 5-2: Safety requirements- Functional CENELEC 5/16/2017

I.S. EN 61800-9-1:2017Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for powerdrive systems, motor starters, power electronics and their driven applications -General requirements for setting energy efficiency standards for power driven ..

CENELEC 7/4/2017

I.S. EN 61800-9-2:2017Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for powerdrive systems, motor starters, power electronics and their driven applications -Energy efficiency indicators for power drive systems and motor starters

CENELEC 7/4/2017

I.S. EN 61810-1:2015/AC:2017-07 Electromechanical elementary relays - Part 1: General and safety requirements CENELEC 8/8/2017

I.S. EN 61810-2-1:2017Electromechanical elementary relays - Part 2-1: Reliability - Procedure for theverification of B10 values CENELEC 10/24/2017

I.S. EN 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability CENELEC 10/24/2017

I.S. EN 61851-21-1:2017Electric vehicle conductive charging system - Part 21-1: Electric vehicleon-board charger EMC requirements for conductive connection to an AC/DCsupply

CENELEC 11/14/2017

I.S. EN 61851-21-1:2017/AC:2017-11Electric vehicle conductive charging system - Part 21-1: Electric vehicleon-board charger EMC requirements for conductive connection to an AC/DCsupply

CENELEC 12/12/2017

I.S. EN 61853-2:2016Photovoltaic (PV) module performance testing and energy rating - Part 2:Spectral responsivity, incidence angle and module operating temperaturemeasurements

CENELEC 1/23/2017

I.S. EN 61857-31:2017Electrical insulation systems - Procedures for thermal evaluation - Part 31:Applications with a designed life of 5 000 h or less CENELEC 5/2/2017

I.S. EN 61869-6:2016Instrument transformers - Part 6: Additional general requirements forlow-power instrument transformers CENELEC 1/16/2017

I.S. EN 61951-1:2017Secondary cells and batteries containing alkaline or other non-acid electrolytes -Secondary sealed cells and batteries for portable applications - Part 1:Nickel-cadmium

CENELEC 6/6/2017

I.S. EN 61951-2:2017Secondary cells and batteries containing alkaline or other non acid electrolytes -Secondary sealed cells and batteries for portable applications - Part 2:Nickel-metal hydride

CENELEC 7/4/2017

I.S. EN 61954:2011/A2:2017 Static VAR compensators (SVC) - Testing of thyristor valves CENELEC 7/25/2017

I.S. EN 61960-3:2017Secondary cells and batteries containing alkaline or other non-acid electrolytes -Secondary lithium cells and batteries for portable applications - Part 3: Prismaticand cylindrical lithium secondary cells, and batteries made from them

CENELEC 5/30/2017

I.S. EN 61967-4:2002/AC:2017-07Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1GHz - Part 4: Measurement of conducted emissions - 1 ohm/150 ohm directcoupling method

CENELEC 8/8/2017

I.S. EN 61970-301:2017Energy management system application program interface (EMS-API) - Part301: Common information model (CIM) base CENELEC 4/18/2017

I.S. EN 61970-452:2017Energy management system application program interface (EMS-API) - Part452: CIM static transmission network model profiles CENELEC 12/5/2017

I.S. EN 61970-552:2016Energy management system application program interface (EMS-API) - Part552: CIMXML Model exchange format CENELEC 1/16/2017

I.S. EN 61975:2010/A1:2017 High-voltage direct current (HVDC) installations - System tests CENELEC 3/1/2017

I.S. EN 61987-11:2017Industrial-process measurement and control - Data structures and elements in-process equipment catalogues - Part 11: Lists of properties (LOPs) ofmeasuring equipment for electronic data exchange - Generic structures

CENELEC 5/9/2017

I.S. EN 61987-15:2017Industrial-process measurement and control - Data structures and elements inprocess equipment catalogues - Part 15: Lists of properties (LOPs) for levelmeasuring equipment for electronic data exchange

CENELEC 3/1/2017

I.S. EN 61987-16:2017Industrial-process measurement and control - Data structures and elements inprocess equipment catalogues - Part 16: Lists of properties (LOPs) for densitymeasuring equipment for electronic data exchange

CENELEC 5/9/2017

I.S. EN 61987-24-2:2017Industrial-process measurement and control - Data structures and elements inprocess equipment catalogues - Part 24-2: List of properties (LOPs) ofvalve/actuator accessories for electronic data exchange

CENELEC 11/14/2017

I.S. EN 61987-24-3:2017Industrial-process measurement and control - Data structures and elements inprocess equipment catalogues - Part 24-3: Lists of properties (LOPs) of flowmodification accessories for electronic data exchange

CENELEC 11/14/2017

I.S. EN 61995-1:2008/A1:2017Devices for the connection of luminaires for household and similar purposes -Part 1: General requirements CENELEC 5/9/2017

I.S. EN 61995-2:2009/A1:2017Devices for the connection of luminaires for household and similar purposes -Part 2: Standard sheets for DCL CENELEC 3/1/2017

I.S. EN 62040-5-3:2017Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performanceand test requirements CENELEC 3/1/2017

I.S. EN 62052-11:2003/A1:2017Electricity metering equipment (AC) - General requirements, tests and testconditions - Part 11: Metering equipment CENELEC 4/18/2017

I.S. EN 62052-21:2004/A1:2017Electricity metering equipment (AC) - General requirements, tests and testconditions - Part 21: Tariff and load control equipment CENELEC 3/14/2017

I.S. EN 62053-11:2003/A1:2017Electricity metering equipment (a.c.) - Particular requirements - Part 11:Electromechanical meters for active energy (classes 0,5, 1 and 2) CENELEC 3/7/2017

I.S. EN 62053-21:2003/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 21: Staticmeters for active energy (classes 1 and 2)

CENELEC 3/7/2017



Reference Title En Origin Body Publication D..I.S. EN 62053-11:2003/A1:2017Electricity metering equipment (a.c.) - Particular requirements - Part 11:Electromechanical meters for active energy (classes 0,5, 1 and 2) CENELEC 3/7/2017

I.S. EN 62053-21:2003/A1:2017Electricity metering equipment (a.c.) - Particular requirements - Part 21: Staticmeters for active energy (classes 1 and 2) CENELEC 3/7/2017

I.S. EN 62053-22:2003/A1:2017Electricity metering equipment (a.c.) - Particular requirements - Part 22: Staticmeters for active energy (classes 0,2 S and 0,5 S) CENELEC 3/7/2017

I.S. EN 62053-23:2003/A1:2017Electricity metering equipment (a.c.) - Particular requirements - Part 23: Staticmeters for reactive energy (classes 2 and 3) CENELEC 4/18/2017

I.S. EN 62053-24:2015/A1:2017Electricity metering equipment (a.c.) - Particular requirements - Part 24: Staticmeters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) CENELEC 4/18/2017

I.S. EN 62054-11:2004/A1:2017Electricity metering (a.c.) - Tariff and load control - Part 11: Particularrequirements for electronic ripple control receivers CENELEC 3/21/2017

I.S. EN 62054-21:2004/A1:2017Electricity metering (AC) - Tariff and load control - Part 21: Particularrequirements for time switches CENELEC 6/6/2017

I.S. EN 62056-5-3:2017Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3:DLMS/COSEM application layer CENELEC 11/28/2017

I.S. EN 62056-6-1:2017Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: ObjectIdentification System (OBIS) CENELEC 12/26/2017

I.S. EN 62056-7-3:2017Electricity metering data exchange - The DLMS/COSEM suite - Part 7-3: Wiredand wireless M-Bus communication profiles for local and neighbourhoodnetworks

CENELEC 6/27/2017

I.S. EN 62056-8-5:2017Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5:Narrow-band OFDM G3-PLC communication profile for neighbourhood networks CENELEC 11/28/2017

I.S. EN 62056-8-6:2017Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: Highspeed PLC ISO/IEC 12139-1 profile for neighbourhood networks CENELEC 7/18/2017

I.S. EN 62090:2017Product package labels for electronic components using bar code and two-dimensional symbologies CENELEC 7/25/2017

I.S. EN 62108:2016Concentrator photovoltaic (CPV) modules and assemblies - Design qualificationand type approval CENELEC 1/23/2017

I.S. EN 62127-2:2007/A2:2017 Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHzCENELEC 7/4/2017

I.S. EN 62133-1:2017Secondary cells and batteries containing alkaline or other non-acid electrolytes -Safety requirements for portable sealed secondary cells, and for batteries madefrom them, for use in portable applications - Part 1: Nickel systems

CENELEC 5/30/2017

I.S. EN 62133-2:2017Secondary cells and batteries containing alkaline or other non-acid electrolytes -Safety requirements for portable sealed secondary cells, and for batteries madefrom them, for use in portable applications - Part 2: Lithium systems

CENELEC 5/30/2017

I.S. EN 62150-5:2017Fibre optic active components and devices - Test and measurement procedures- Part 5: Wavelength channel tuning time of tuneable transmitters CENELEC 9/5/2017

I.S. EN 62196-2:2017Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductivecharging of electric vehicles - Part 2: Dimensional compatibility andinterchangeability requirements for a.c. pin and contact-tube accessories

CENELEC 5/16/2017

I.S. EN 62211:2017 Inductive components - Reliability management CENELEC 5/9/2017

I.S. EN 62226-3-1:2007/A1:2017Exposure to electric or magnetic fields in the low and intermediate frequencyrange - Methods for calculating the current density and internal electric fieldinduced in the human body - Part 3-1: Exposure to electric fields - Analytical a..

CENELEC 2/7/2017

I.S. EN 62228-2:2017 Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers CENELEC 2/21/2017

I.S. EN 62232:2017Determination of RF field strength, power density and SAR in the vicinity ofradiocommunication base stations for the purpose of evaluating humanexposure

CENELEC 12/19/2017

I.S. EN 62256:2017Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation andperformance improvement CENELEC 9/19/2017

I.S. EN 62264-3:2017Enterprise-control system integration - Part 3: Activity models of manufacturingoperations management CENELEC 4/11/2017

I.S. EN 62271-1:2017High-voltage switchgear and controlgear - Part 1: Common specifications foralternating current switchgear and controlgear CENELEC 11/14/2017

I.S. EN 62271-100:2009/A2:2017High-voltage switchgear and controlgear - Part 100: Alternating-currentcircuit-breakers CENELEC 9/19/2017

I.S. EN 62271-211:2014/AC:2017-09High-voltage switchgear and controlgear - Part 211: Direct connection betweenpower transformers and gas-insulated metal-enclosed switchgear for ratedvoltages above 52 kV

CENELEC 10/3/2017

I.S. EN 62271-212:2017High-voltage switchgear and controlgear - Part 212: Compact EquipmentAssembly for Distribution Substation (CEADS) CENELEC 2/7/2017

I.S. EN 62281:2017 Safety of primary and secondary lithium cells and batteries during transport CENELEC 5/9/2017

I.S. EN 62282-3-201:2017Fuel cell technologies - Part 3-201: Stationary fuel cell power systems -Performance test methods for small fuel cell power systems CENELEC 11/14/2017

I.S. EN 62282-4-102:2017Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electrictrucks - Performance test methods CENELEC 7/18/2017

I.S. EN 62282-6-200:2017Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performancetest methods CENELEC 2/7/2017

I.S. EN 62287-1:2017Maritime navigation and radiocommunication equipment and systems - Class Bshipborne equipment of the automatic identification system (AIS) - Part 1:Carrier-sense time division multiple access (CSTDMA) techniques

CENELEC 8/15/2017

I.S. EN 62287-2:2017 Maritime navigation and radiocommunication equipment and systems - Class Bshipborne equipment of the automatic identification system (AIS) - Part 2:Self-organising time division multiple access (SOTDMA) techniques

CENELEC 5/30/2017



Reference Title En Origin Body Publication D..I.S. EN 62287-1:2017

Maritime navigation and radiocommunication equipment and systems - Class Bshipborne equipment of the automatic identification system (AIS) - Part 1:Carrier-sense time division multiple access (CSTDMA) techniques CENELEC 8/15/2017

I.S. EN 62287-2:2017Maritime navigation and radiocommunication equipment and systems - Class Bshipborne equipment of the automatic identification system (AIS) - Part 2:Self-organising time division multiple access (SOTDMA) techniques

CENELEC 5/30/2017

I.S. EN 62320-2:2017Maritime navigation and radiocommunication equipment and systems -Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operationaland performance requirements, methods of testing and required test results

CENELEC 2/14/2017

I.S. EN 62321-4:2014/A1:2017Determination of certain substances in electrotechnical products - Part 4:Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES andICP-MS

CENELEC 12/5/2017

I.S. EN 62321-7-2:2017Determination of certain substances in electrotechnical products - Part 7-2:Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) inpolymers and electronics by the colorimetric method

CENELEC 7/11/2017

I.S. EN 62321-8:2017Determination of certain substances in electrotechnical products - Part 8:Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption ..

CENELEC 7/11/2017

I.S. EN 62325-451-1:2017Framework for energy market communications - Part 451-1: Acknowledgementbusiness process and contextual model for CIM European market CENELEC 6/20/2017

I.S. EN 62325-451-3:2014/A1:2017Framework for energy market communications - Part 451-3: Transmissioncapacity allocation business process (explicit or implicit auction) and contextualmodels for European market

CENELEC 8/1/2017

I.S. EN 62325-451-4:2017Framework for energy market communications - Part 451-4: Settlement andreconciliation business process, contextual and assembly models for Europeanmarket

CENELEC 7/25/2017

I.S. EN 62343:2017 Dynamic modules - General and guidance CENELEC 11/7/2017

I.S. EN 62351-9:2017Power systems management and associated information exchange - Data andcommunications security - Part 9: Cyber security key management for powersystem equipment

CENELEC 7/25/2017

I.S. EN 62351-11:2017Power systems management and associated information exchange â€“ Data andcommunications security - Part 11: Security for XML documents CENELEC 3/1/2017

I.S. EN 62368-1:2014/A11:2017Audio/video, information and communication technology equipment - Part 1:Safety requirements (IEC 62368-1:2014, modified) CENELEC 2/7/2017

I.S. EN 62368-1:2014/AC:2017-03Audio/video, information and communication technology equipment - Part 1:Safety requirements (IEC 62368-1:2014, modified) CENELEC 4/11/2017

I.S. EN 62386-301:2017Digital addressable lighting interface - Part 301: Particular requirements - Inputdevices - Push buttons CENELEC 10/3/2017

I.S. EN 62386-302:2017Digital addressable lighting interface - Part 302: Particular requirements - Inputdevices - Absolute input devices CENELEC 10/3/2017

I.S. EN 62386-303:2017Digital addressable lighting interface - Part 303: Particular requirements - Inputdevices - Occupancy sensor CENELEC 10/3/2017

I.S. EN 62386-304:2017Digital addressable lighting interface - Part 304: Particular requirements - Inputdevices - Light sensor CENELEC 10/3/2017

I.S. EN 62391-1:2016/AC:2016-12Fixed electric double-layer capacitors for use in electric and electronicequipment - Part 1: Generic specification CENELEC 1/23/2017

I.S. EN 62433-2:2017EMC IC modelling - Part 2: Models of integrated circuits for EMI behaviouralsimulation - Conducted emissions modelling (ICEM-CE) CENELEC 5/30/2017

I.S. EN 62433-3:2017EMC IC modelling - Part 3: Models of Integrated Circuits for EMI behaviouralsimulation - Radiated emissions modelling (ICEM-RE) CENELEC 6/20/2017

I.S. EN 62435-1:2017Electronic components - Long-term storage of electronic semiconductor devices- Part 1: General CENELEC 5/16/2017

I.S. EN 62435-2:2017Electronic components - Long-term storage of electronic semiconductor devices- Part 2: Deterioration mechanisms CENELEC 5/16/2017

I.S. EN 62435-5:2017Electronic components - Long-term storage of electronic semiconductor devices- Part 5: Die and wafer devices CENELEC 4/18/2017

I.S. EN 62439-1:2010/A2:2017Industrial communication networks - High availability automation networks -Part 1: General concepts and calculation methods CENELEC 11/28/2017

I.S. EN 62439-2:2017Industrial communication networks - High availability automation networks -Part 2: Media Redundancy Protocol (MRP) CENELEC 12/12/2017

I.S. EN 62442-1:2011/A11:2017Energy performance of lamp controlgear - Part 1: Controlgear for fluorescentlamps - Method of measurement to determine the total input power ofcontrolgear circuits and the efficiency of the controlgear

CENELEC 10/24/2017

I.S. EN 62442-2:2014/A11:2017Energy performance of lamp controlgear - Part 2: Controlgear for high intensitydischarge lamps (excluding fluorescent lamps) - Method of measurement todetermine the efficiency of the controlgear

CENELEC 10/24/2017

I.S. EN 62442-3:2014/A11:2017Energy performance of lamp controlgear - Part 3: Controlgear for halogen lampsand LED modules - Method of measurement to determine the efficiency of thecontrolgear

CENELEC 10/24/2017

I.S. EN 62453-1:2017 Field Device Tool (FDT) interface specification - Part 1: Overview and guidance CENELEC 4/11/2017

I.S. EN 62453-2:2017Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailedDescription CENELEC 4/11/2017

I.S. EN 62453-302:2017Field device tool (FDT) interface specification - Part 302: Communication profileintegration - IEC 61784 CPF 2 CENELEC 12/26/2017

I.S. EN 62453-303-2:2009/A1:2017Field device tool (FDT) interface specification - Part 303-2: Communicationprofile integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6 CENELEC 12/12/2017

I.S. EN 62453-309:2017Field device tool (FDT) interface specification - Part 309: Communication profileintegration - IEC 61784 CPF 9 CENELEC 12/26/2017

I.S. EN 62453-315:2009/A1:2017 Field device tool (FDT) interface specification - Part 315: Communication profileintegration - IEC 61784 CPF 15

CENELEC 12/12/2017



Reference Title En Origin Body Publication D..I.S. EN 62453-309:2017Field device tool (FDT) interface specification - Part 309: Communication profileintegration - IEC 61784 CPF 9 CENELEC 12/26/2017

I.S. EN 62453-315:2009/A1:2017Field device tool (FDT) interface specification - Part 315: Communication profileintegration - IEC 61784 CPF 15 CENELEC 12/12/2017

I.S. EN 62477-1:2012/A1:2017Safety requirements for power electronic converter systems and equipment -Part 1: General CENELEC 3/1/2017

I.S. EN 62488-2:2017Power line communication systems for power utility applications - Part 2:Analogue power line carrier terminals or APLC CENELEC 11/1/2017

I.S. EN 62496-2:2017Optical circuit boards - Basic test and measurement procedures - Part 2:General guidance for definition of measurement conditions for opticalcharacteristics of optical circuit boards

CENELEC 10/10/2017

I.S. EN 62532:2011/A1:2017 Fluorescent induction lamps - Safety specifications CENELEC 5/16/2017

I.S. EN 62550:2017 Spare parts provisioning CENELEC 4/11/2017

I.S. EN 62561-1:2017Lightning Protection System Components (LPSC) - Part 1: Requirements forconnection components CENELEC 6/27/2017

I.S. EN 62561-3:2017Lightning Protection System Components (LPSC) - Part 3: Requirements forisolating spark gaps (ISG) CENELEC 9/19/2017

I.S. EN 62561-4:2017Lightning protection system components (LPSC) - Part 4: Requirements forconductor fasteners CENELEC 12/19/2017

I.S. EN 62561-5:2017Lightning protection system components (LPSC) - Part 5: Requirements forearth electrode inspection housings and earth electrode seals CENELEC 12/19/2017

I.S. EN 62569-1:2017Generic specification of information on products by properties - Part 1:Principles and method CENELEC 10/24/2017

I.S. EN 62580-1:2016/A11:2017Electronic railway equipment - On-board multimedia and telematic subsystemsfor railways - Part 1: General architecture CENELEC 7/18/2017

I.S. EN 62586-1:2017Power quality measurement in power supply systems - Part 1: Power qualityinstruments (PQI) CENELEC 11/28/2017

I.S. EN 62586-2:2017Power quality measurement in power supply systems - Part 2: Functional testsand uncertainty requirements CENELEC 9/12/2017

I.S. EN 62606:2013/A1:2017 General requirements for arc fault detection devices CENELEC 12/19/2017

I.S. EN 62612:2013/A1:2017Self-ballasted LED lamps for general lighting services with supply voltages > 50V - Performance requirements CENELEC 7/18/2017

I.S. EN 62612:2013/A11:2017Self-ballasted LED lamps for general lighting services with supply voltages > 50V - Performance requirements CENELEC 7/18/2017

I.S. EN 62612:2013/A11:2017/AC:2017-11Self-ballasted LED lamps for general lighting services with supply voltages > 50V - Performance requirements CENELEC 12/5/2017

I.S. EN 62619:2017Secondary cells and batteries containing alkaline or other non-acid electrolytes -Safety requirements for secondary lithium cells and batteries, for use inindustrial applications

CENELEC 6/6/2017

I.S. EN 62625-1:2013/A11:2017Electronic railway equipment - On board driving data recording system - Part 1:System specification CENELEC 3/28/2017

I.S. EN 62656-5:2017Standardized product ontology register and transfer by spreadsheets - Part 5:Interface for activity description CENELEC 11/1/2017

I.S. EN 62657-1:2017Industrial communication networks - Wireless communication networks - Part 1:Wireless communication requirements and spectrum considerations CENELEC 11/14/2017

I.S. EN 62657-2:2017Industrial communication networks - Wireless communication networks - Part 2:Coexistence management CENELEC 8/1/2017

I.S. EN 62670-3:2017Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performancemeasurements and power rating CENELEC 5/30/2017

I.S. EN 62680-1-2:2017Universal serial bus interfaces for data and power - Part 1-2: Commoncomponents - USB Power Delivery specification CENELEC

2/7/2017

11/14/2017

I.S. EN 62680-3-1:2017Universal Serial Bus interfaces for data and power - Part 3-1: Universal SerialBus 3.1 Specification CENELEC 7/18/2017

I.S. EN 62683-1:2017Low-voltage switchgear and controlgear - Product data and properties forinformation exchange - Part 1: Catalogue data CENELEC 10/24/2017

I.S. EN 62689-1:2016Current and voltage sensors or detectors, to be used for fault passage indicationpurposes - Part 1: General principles and requirements CENELEC 1/23/2017

I.S. EN 62689-2:2017Current and voltage sensors or detectors, to be used for fault passage indicationpurposes - Part 2: System aspects CENELEC 10/10/2017

I.S. EN 62714-3:2017Engineering data exchange format for use in industrial automation systemsengineering - Automation markup language - Part 3: Geometry and kinematics CENELEC 6/6/2017

I.S. EN 62717:2017 LED modules for general lighting - Performance requirements CENELEC 7/4/2017

I.S. EN 62733:2015/AC:2017-09Programmable components in electronic lamp controlgear - General and safetyrequirements CENELEC 10/3/2017

I.S. EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-freesolder alloy - Part 3: Selection guidance of erosion test methods

CENELEC 4/18/2017



Reference Title En Origin Body Publication D..I.S. EN 62733:2015/AC:2017-09Programmable components in electronic lamp controlgear - General and safetyrequirements CENELEC 10/3/2017

I.S. EN 62739-3:2017Test method for erosion of wave soldering equipment using molten lead-freesolder alloy - Part 3: Selection guidance of erosion test methods CENELEC 4/18/2017

I.S. EN 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery CENELEC 6/20/2017

I.S. EN 62754:2017 Computation of waveform Parameter uncertainties CENELEC 9/19/2017

I.S. EN 62765-1:2017Nuclear powers plants - Instrumentation and control important to safety -Management of ageing of sensors and transmitters - Part 1: Pressuretransmitters

CENELEC 11/1/2017

I.S. EN 62788-1-4:2016Measurement procedures for materials used in photovoltaic modules - Part 1-4:Encapsulants - Measurement of optical transmittance and calculation of thesolar-weighted photon transmittance, yellowness index, and UV cut-off wavele..

CENELEC 1/23/2017

I.S. EN 62788-1-5:2016/AC:2017-11Measurement procedures for materials used in photovoltaic modules - Part 1-5:Encapsulants - Measurement of change in linear dimensions of sheetencapsulation material resulting from applied thermal conditions

CENELEC 12/12/2017

I.S. EN 62788-1-6:2017Measurement procedures for materials used in photovoltaic modules - Part 1-6:Encapsulants - Test methods for determining the degree of cure inEthylene-Vinyl Acetate

CENELEC 5/23/2017

I.S. EN 62802:2017Measurement methods of a half-wavelength voltage and a chirp parameter forMach-Zehnder optical modulators in high-frequency radio on fibre (RoF)Systems

CENELEC 12/19/2017

I.S. EN 62805-1:2017Method for measuring photovoltaic (PV) glass - Part 1: Measurement of totalhaze and spectral distribution of haze CENELEC 11/28/2017

I.S. EN 62805-2:2017Method for measuring photovoltaic (PV) glass - Part 2: Measurement oftransmittance and reflectance CENELEC 11/28/2017

I.S. EN 62817:2015/A1:2017 Photovoltaic systems - Design qualification of solar trackers CENELEC 12/12/2017

I.S. EN 62820-1-2:2017Building intercom system - Part 1-2: System requirements - Building intercomsystems using the internet protocol (IP) CENELEC 11/1/2017

I.S. EN 62827-2:2017Wireless power transfer - Management - Part 2: Multiple device controlmanagement CENELEC 10/17/2017

I.S. EN 62827-3:2017Wireless power transfer - Management - Part 3: Multiple source controlmanagement CENELEC 4/18/2017

I.S. EN 62838:2016/AC:2017-11LEDsi lamps for general lighting services with supply voltages not exceeding 50V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications CENELEC 12/12/2017

I.S. EN 62841-2-10:2017Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-10: Particular requirements for hand-heldmixers

CENELEC 7/11/2017

I.S. EN 62841-3-1:2014/A11:2017Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 3-1: Particular requirements for transportabletable saws (IEC 62841-3-1:2014, modified)

CENELEC 12/26/2017

I.S. EN 62841-3-4:2016/A11:2017Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 3-4: Particular requirements for transportablebench grinders

CENELEC 12/26/2017

I.S. EN 62841-3-4:2016/AC:2017-01Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 3-4: Particular requirements for transportablebench grinders

CENELEC 2/7/2017

I.S. EN 62841-3-6:2014/A11:2017Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn andGarden Machinery - Safety - Part 3-6: Particular requirements for transportablediamond drills with liquid system

CENELEC 12/26/2017

I.S. EN 62841-3-9:2015/A11:2017Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 3-9: Particular requirements for transportablemitre saws

CENELEC 12/26/2017

I.S. EN 62841-3-13:2017Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 3-13: Particular requirements for transportabledrills

CENELEC 7/11/2017

I.S. EN 62863:2017Methods of measuring performances of electric hair clippers or trimmers forhousehold use CENELEC 11/28/2017

I.S. EN 62877-1:2016/AC:2017-05Electrolyte and water for vented lead acid accumulators - Part 1: Requirementsfor electrolyte CENELEC 6/13/2017

I.S. EN 62884-1:2017Measurement techniques of piezoelectric, dielectric and electrostatic oscillators -Part 1: Basic methods for the measurement CENELEC 10/10/2017

I.S. EN 62884-2:2017Measurement techniques of piezoelectric, dielectric and electrostatic oscillators -Part 2: Phase jitter measurement method CENELEC 12/19/2017

I.S. EN 62920:2017Photovoltaic power generating systems - EMC requirements and test methodsfor power conversion equipment CENELEC 11/1/2017

I.S. EN 62922:2017Organic light emitting diode (OLED) panels for general lighting - PerformanceRequirements CENELEC 3/7/2017

I.S. EN 62924:2017Railway applications - Fixed installations - Stationary energy storage system forDC traction systems CENELEC 5/9/2017

I.S. EN 62925:2017Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiateincreased thermal fatigue durability CENELEC 5/23/2017

I.S. EN 62927:2017Voltage sourced converter (VSC) valves for static synchronous compensator(STATCOM) - Electrical Testing CENELEC 11/7/2017

I.S. EN 62931:2017 GX16t-5 capped tubular led lamp - Safety specifications CENELEC 7/11/2017

I.S. EN 62940:2017Maritime navigation and radiocommunication equipment and systems -Integrated communication system (ICS) - Operational and performancerequirements, methods of testing and required test results

CENELEC 2/7/2017

I.S. EN 62943:2017 Visible light beacon system for multimedia applications CENELEC 7/11/2017




Maritime navigation and radiocommunication equipment and systems -Integrated communication system (ICS) - Operational and performancerequirements, methods of testing and required test results CENELEC 2/7/2017

I.S. EN 62943:2017 Visible light beacon system for multimedia applications CENELEC 7/11/2017

I.S. EN 62944:2017Audio, video and multimedia systems and equipment - Digital televisionaccessibility - Functional specifications CENELEC 7/4/2017

I.S. EN 62948:2017Industrial networks - Wireless communication network and communicationprofiles - WIA-FA CENELEC 12/19/2017

I.S. EN 62949:2017Particular safety requirements for equipment to be connected to informationand communication networks CENELEC 6/27/2017

I.S. EN 62952-3:2017Power sources for a wireless communication device - Part 3: Generic energyharvesting adaptor module CENELEC 10/17/2017

I.S. EN 62974-1:2017Monitoring and measuring systems used for data collection, gathering andanalysis - Part 1: Device requirements CENELEC 8/8/2017

I.S. EN 62979:2017 Photovoltaic module - Bypass diode - Thermal runaway test CENELEC 11/14/2017

I.S. EN 63002:2017Identification and communication interoperability method for external powersupplies used with portable computing devices CENELEC 3/21/2017

I.S. EN 63005-1:2017Event video data recorder for road vehicle accidents - Part 1: Basicrequirements CENELEC 12/5/2017

I.S. EN 63028:2017 Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS)CENELEC 10/17/2017

I.S. EN 63029:2017Audio, video and multimedia systems and equipment - Multimedia e-publishingand e-book technologies - Raster-graphics image-based e-books CENELEC 10/24/2017

I.S. EN 63035:2017MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition,2015) CENELEC 10/17/2017

I.S. EN 63044-1:2017Home and Building Electronic Systems (HBES) and Building Automation andControl Systems (BACS) - Part 1: General requirements CENELEC 5/16/2017

I.S. EN 63080:2017 Accessibility terms and definitions CENELEC 12/19/2017

I.S. EN 80369-5:2016Small-bore connectors for liquids and gases in healthcare applications - Part 5:Connectors for limb cuff inflation applications CENELEC 4/2/2017

I.S. EN 80369-5:2016/AC:2017-02Small-bore connectors for liquids and gases in healthcare applications - Part 5:Connectors for limb cuff inflation applications CENELEC 4/2/2017

I.S. EN 80601-2-35:2009/A1:2016Medical electrical equipment - Part 2-35: Particular requirements for the basicsafety and essential performance of heating devices using blankets, pads andmattresses and intended for heating in medical use

CENELEC 1/23/2017

I.S. EN 82304-1:2017 Health Software - Part 1: General requirements for product safety CENELEC 9/19/2017

I.S. EN 140401-802:2007/A3:2017Detail specification: Fixed low power film SMD resistors - Rectangular - Stabilityclasses 1; 2 CENELEC 4/4/2017

I.S. EN 140402:2015/A1:2016Blank Detail Specification: Fixed low power wirewound surface mount (SMD)resistors CENELEC 1/23/2017

I.S. EN 175101-809:2004/AC:2005Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 5/17/2017

I.S. EN 419212-1:2017Application Interface for Secure Elements for Electronic Identification,Authentication and Trusted Services - Part 1: Introduction and commondefinitions

CEN 10/9/2017

I.S. EN 419212-2:2017Application Interface for Secure Elements for Electronic Identification,Authentication and Trusted Services - Part 2: Signature and Seal Services CEN 12/31/2017

I.S. EN 419212-3:2017Application Interface for Secure Elements for Electronic Identification,Authentication and Trusted Services - Part 3: Device authentication protocols CEN 10/9/2017

I.S. EN ISO 105-B03:2017Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering:Outdoor exposure (ISO 105-B03:2017) CEN 12/24/2017

I.S. EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016) CEN 2/12/2017

I.S. EN ISO 287:2017Paper and board - Determination of moisture content of a lot - Oven-dryingmethod (ISO 287:2017) CEN 12/31/2017

I.S. EN ISO 294-1:2017Plastics - Injection moulding of test specimens of thermoplastic materials - Part1: General principles, and moulding of multipurpose and bar test specimens(ISO 294-1:2017)

CEN 6/25/2017

I.S. EN ISO 294-5:2017Plastics - Injection moulding of test specimens of thermoplastic materials - Part5: Preparation of standard specimens for investigating anisotropy (ISO294-5:2017)

CEN 12/31/2017

I.S. EN ISO 377:2017Steel and steel products - Location and preparation of samples and test piecesfor mechanical testing (ISO 377:2017) CEN 7/30/2017

I.S. EN ISO 505:2017Conveyor belts - Method for the determination of the tear propagationresistance of textile conveyor belts (ISO 505:2017) CEN 12/24/2017

I.S. EN ISO 636:2017Welding consumables - Rods, wires and deposits for tungsten inert gas weldingof non-alloy and fine-grain steels - Classification (ISO 636:2017) CEN 7/9/2017

I.S. EN ISO 663:2017Animal and vegetable fats and oils - Determination of insoluble impuritiescontent (ISO 663:2017) CEN 3/6/2017

I.S. EN ISO 703:2017 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO703:2017)

CEN 2/12/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 663:2017Animal and vegetable fats and oils - Determination of insoluble impuritiescontent (ISO 663:2017) CEN 3/6/2017

I.S. EN ISO 703:2017Conveyor belts - Transverse flexibility (troughability) - Test method (ISO703:2017) CEN 2/12/2017

I.S. EN ISO 787-1:2017General methods of test for pigments and extenders - Part 1: Comparison ofcolour of pigments (ISO 787-1:1982) CEN 11/5/2017

I.S. EN ISO 787-4:2017General methods of test for pigments and extenders - Part 4: Determination ofacidity or alkalinity of the aqueous extract (ISO 787-4:1981) CEN 11/5/2017

I.S. EN ISO 787-17:2017General methods of test for pigments and extenders - Part 17: Comparison oflightening power of white pigments (ISO 787-17:2002) CEN 11/5/2017

I.S. EN ISO 787-21:2017General methods of test for pigments and extenders - Part 21: Comparison ofheat stability of pigments using a stoving medium (ISO 787-21:1979) CEN 11/5/2017

I.S. EN ISO 787-22:2017General methods of test for pigments and extenders - Part 22: Comparison ofresistance to bleeding of pigments (ISO 787-22:1980) CEN 11/5/2017

I.S. EN ISO 899-1:2017Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO899-1:2017) CEN 12/3/2017

I.S. EN ISO 1101:2017Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerancesof form, orientation, location and run-out (ISO 1101:2017) CEN 3/6/2017

I.S. EN ISO 1107:2017 Fishing nets - Netting - Basic terms and definitions (ISO 1107:2017) CEN 9/10/2017

I.S. EN ISO 1135-3:2017Transfusion equipment for medical use - Part 3: Blood-taking sets for single use(ISO 1135-3:2016) CEN 3/24/2017

I.S. EN ISO 1421:2016Rubber- or plastics-coated fabrics - Determination of tensile strength andelongation at break (ISO 1421:2016) CEN 1/1/2017

I.S. EN ISO 1660:2017Geometrical product specifications (GPS) - Geometrical tolerancing - Profiletolerancing (ISO 1660:2017) CEN 3/6/2017

I.S. EN ISO 1797:2017 Dentistry - Shanks for rotary and oscillating instruments (ISO 1797:2017) CEN 6/11/2017

I.S. EN ISO 1833-4:2017Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain proteinfibres with certain other fibres (method using hypochlorite) (ISO 1833-4:2017) CEN 9/24/2017

I.S. EN ISO 1833-7:2017Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide withcertain other fibres (method using formic acid) (ISO 1833-7:2017) CEN 10/1/2017

I.S. EN ISO 1833-11:2017Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain cellulosefibres with certain other fibres (method using sulfuric acid) (ISO 1833-11:2017)CEN 10/1/2017

I.S. EN ISO 1938-2:2017Geometrical product specifications (GPS) - Dimensional measuring equipment -Part 2: Reference disk gauges (ISO 1938-2:2017) CEN 2/27/2017

I.S. EN ISO 2063-1:2017Thermal spraying - Zinc, aluminium and their alloys - Part 1: Designconsiderations and quality requirements for corrosion protection systems (ISO2063-1:2017)

CEN 10/29/2017

I.S. EN ISO 2063-2:2017Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution ofcorrosion protection systems (ISO 2063-2:2017) CEN 10/29/2017

I.S. EN ISO 2082:2017Metallic and other inorganic coatings - Electroplated coatings of cadmium withsupplementary treatments on iron or steel (ISO 2082:2017) CEN 9/17/2017

I.S. EN ISO 2143:2017Anodizing of aluminium and its alloys - Estimation of loss of absorptive power ofanodic oxidation coatings after sealing - Dye-spot test with prior acid treatment(ISO 2143:2017)

CEN 12/10/2017

I.S. EN ISO 2360:2017Non-conductive coatings on non-magnetic electrically conductive base metals -Measurement of coating thickness - Amplitude-sensitive eddy-current method(ISO 2360:2017)

CEN 9/17/2017

I.S. EN ISO 2411:2017Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO2411:2017) CEN 10/29/2017

I.S. EN ISO 2418:2017Leather - Chemical, physical and mechanical and fastness test - Samplinglocation (ISO 2418:2017) CEN 3/6/2017

I.S. EN ISO 2420:2017Leather - Physical and mechanical tests - Determination of apparent density andmass per unit area (ISO 2420:2017) CEN 3/6/2017

I.S. EN ISO 2507-1:2017Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: Generaltest method (ISO 2507-1:1995) CEN 11/5/2017

I.S. EN ISO 2507-2:2017Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Testconditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinylchloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl c..

CEN 11/5/2017

I.S. EN ISO 2507-3:2017Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Testconditions for acrylonitrile/butadiene/styrene (ABS) andacrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)

CEN 11/5/2017

I.S. EN ISO 2592:2017Petroleum and related products - Determination of flash and fire points -Cleveland open cup method (ISO 2592:2017) CEN 10/15/2017

I.S. EN ISO 2603:2016 Simultaneous interpreting - Permanent booths - Requirements (ISO 2603:2016)CEN 1/16/2017

I.S. EN ISO 2812-1:2017Paints and varnishes - Determination of resistance to liquids - Part 1: Immersionin liquids other than water (ISO 2812-1:2017) CEN 12/31/2017

I.S. EN ISO 2812-4:2017Paints and varnishes - Determination of resistance to liquids - Part 4: Spottingmethods (ISO 2812-4:2017) CEN 12/31/2017

I.S. EN ISO 3127:2017Thermoplastics pipes - Determination of resistance to external blows -Round-the-clock method (ISO 3127:1994) CEN 11/5/2017

I.S. EN ISO 3210:2017 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodicoxidation coatings by measurement of the loss of mass after immersion in acidsolution(s) (ISO 3210:2017)

CEN 12/24/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 3127:2017Thermoplastics pipes - Determination of resistance to external blows -Round-the-clock method (ISO 3127:1994) CEN 11/5/2017

I.S. EN ISO 3210:2017Anodizing of aluminium and its alloys - Assessment of quality of sealed anodicoxidation coatings by measurement of the loss of mass after immersion in acidsolution(s) (ISO 3210:2017)

CEN 12/24/2017

I.S. EN ISO 3580:2017Welding consumables - Covered electrodes for manual metal arc welding ofcreep-resisting steels - Classification (ISO 3580:2017) CEN 5/28/2017

I.S. EN ISO 3656:2011/A1:2017Animal and vegetable fats and oils - Determination of ultraviolet absorbanceexpressed as specific UV extinction - Amendment 1 (ISO 3656:2011/Amd1:2017)

CEN 5/28/2017

I.S. EN ISO 3691-3:2016Industrial trucks - Safety requirements and verification - Part 3: Additionalrequirements for trucks with elevating operator position and trucks specificallydesigned to travel with elevated loads (ISO 3691-3:2016)

CEN 1/16/2017

I.S. EN ISO 3745:2012/A1:2017Acoustics - Determination of sound power levels and sound energy levels ofnoise sources using sound pressure - Precision methods for anechoic rooms andhemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)

CEN 5/28/2017

I.S. EN ISO 3927:2017Metallic powders, excluding powders for hardmetals - Determination ofcompressibility in uniaxial compression (ISO 3927:2017) CEN 10/15/2017

I.S. EN ISO 3960:2017Animal and vegetable fats and oils - Determination of peroxide value -Iodometric (visual) endpoint determination (ISO 3960:2017) CEN 3/6/2017

I.S. EN ISO 4043:2016 Simultaneous interpreting - Mobile booths - Requirements (ISO 4043:2016) CEN 1/16/2017

I.S. EN ISO 4044:2017Leather - Chemical tests - Preparation of chemical test samples (ISO4044:2017) CEN 2/12/2017

I.S. EN ISO 4064-1:2017Water meters for cold potable water and hot water - Part 1: Metrological andtechnical requirements (ISO 4064-1:2014) CEN 6/11/2017

I.S. EN ISO 4064-2:2017Water meters for cold potable water and hot water - Part 2: Test methods (ISO4064-2:2014) CEN 6/11/2017

I.S. EN ISO 4064-5:2017Water meters for cold potable water and hot water - Part 5: Installationrequirements (ISO 4064-5:2014) CEN 6/11/2017

I.S. EN ISO 4254-7:2017Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters,cotton harvesters and sugar cane harversters (ISO 4254-7:2017) CEN 12/24/2017

I.S. EN ISO 4254-12:2012/A1:2017Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flailmowers (ISO 4254-12:2012/Amd 1:2017) CEN 6/25/2017

I.S. EN ISO 4259-1:2017Petroleum and related products - Precision of measurement methods andresults - Part 1: Determination of precision data in relation to methods of test(ISO 4259-1:2017)

CEN 12/24/2017

I.S. EN ISO 4259-2:2017Petroleum and related products - Precision of measurement methods andresults - Part 2: Interpretation and application of precision data in relation tomethods of test (ISO 4259-2:2017)

CEN 12/24/2017

I.S. EN ISO 4492:2017Metallic powders, excluding powders for hardmetals - Determination ofdimensional changes associated with compacting and sintering (ISO 4492:2017)CEN 12/17/2017

I.S. EN ISO 4496:2017Metallic powders - Determination of acid-insoluble content in iron, copper, tinand bronze powders (ISO 4496:2017) CEN 8/27/2017

I.S. EN ISO 4589-1:2017Plastics - Determination of burning behaviour by oxygen index - Part 1: Generalrequirements (ISO 4589-1:2017) CEN 5/28/2017

I.S. EN ISO 4589-2:2017Plastics - Determination of burning behaviour by oxygen index - Part 2:Ambient-temperature test (ISO 4589-2:2017) CEN 5/28/2017

I.S. EN ISO 4589-3:2017Plastics - Determination of burning behaviour by oxygen index - Part 3:Elevated-temperature test (ISO 4589-3:2017) CEN 5/28/2017

I.S. EN ISO 4641:2016Rubber hoses and hose assemblies for water suction and discharge -Specification (ISO 4641:2016) CEN 1/1/2017

I.S. EN ISO 4885:2017 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2017) CEN 3/24/2017

I.S. EN ISO 5175-1:2017Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame(flashback) arrestor (ISO 5175-1:2017) CEN 12/17/2017

I.S. EN ISO 5175-2:2017Gas welding equipment - Safety devices - Part 2: Devices not incorporating aflame (flashback) arrestor (ISO 5175-2:2017) CEN 12/17/2017

I.S. EN ISO 5210:2017 Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) CEN 5/14/2017

I.S. EN ISO 5211:2017 Industrial valves - Part-turn actuator attachments (ISO 5211:2017) CEN 5/14/2017

I.S. EN ISO 5359:2014/A1:2017Anaesthetic and respiratory equipment - Low-pressure hose assemblies for usewith medical gases - Amendment 1 (ISO 5359:2014/Amd 1:2017) CEN 12/17/2017

I.S. EN ISO 5395-2:2013/A1:2016Garden equipment - Safety requirements for combustion-engine-poweredlawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 1: OPC,cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016)

CEN 1/1/2017

I.S. EN ISO 5395-2:2013/A2:2017Garden equipment - Safety requirements for combustion-engine-poweredlawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 2:Cutting-means-enclosure guards (ISO 5395-2:2013/Amd 2:2017)

CEN 6/11/2017

I.S. EN ISO 5395-3:2013/A1:2017Garden equipment - Safety requirements for combustion-engine-poweredlawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher ..

CEN 2/20/2017

I.S. EN ISO 5402-1:2017Leather - Determination of flex resistance - Part 1: Flexometer method (ISO5402-1:2017) CEN 3/6/2017

I.S. EN ISO 5492:2009/A1:2017 Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016) CEN 2/5/2017

I.S. EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017) CEN 3/6/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 5492:2009/A1:2017 Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016) CEN 2/5/2017

I.S. EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017) CEN 3/6/2017

I.S. EN ISO 5659-2:2017Plastics - Smoke generation - Part 2: Determination of optical density by asingle-chamber test (ISO 5659-2:2017) CEN 7/9/2017

I.S. EN ISO 5667-16:2017Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO5667-16:2017) CEN 5/28/2017

I.S. EN ISO 5754:2017Sintered metal materials, excluding hardmetals - Unnotched impact test piece(ISO 5754:2017) CEN 12/17/2017

I.S. EN ISO 5801:2017 Fans - Performance testing using standardized airways (ISO 5801:2017) CEN 11/13/2017

I.S. EN ISO 6134:2017Rubber hoses and hose assemblies for saturated steam - Specification (ISO6134:2017) CEN 2/12/2017

I.S. EN ISO 6145-6:2017Gas analysis - Preparation of calibration gas mixtures using dynamic methods -Part 6: Critical flow orifices (ISO 6145-6:2017) CEN 9/4/2017

I.S. EN ISO 6149-4:2017Connections for fluid power and general use - Ports and stud ends with ISO 261metric threads and O-ring sealing - Part 4: Dimensions, design, test methodsand requirements for external hex and internal hex port plugs (ISO 6149-4:20..

CEN 10/1/2017

I.S. EN ISO 6179:2017Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics -Determination of transmission rate of volatile liquids (gravimetric technique)(ISO 6179:2017)

CEN 9/17/2017

I.S. EN ISO 6246:2017Petroleum products - Gum content of fuels - Jet evaporation method (ISO6246:2017) CEN 4/23/2017

I.S. EN ISO 6320:2017Animal and vegetable fats and oils - Determination of refractive index (ISO6320:2017) CEN 4/2/2017

I.S. EN ISO 6416:2017Hydrometry - Measurement of discharge by the ultrasonic transit time (time offlight) method (ISO 6416:2017) CEN 12/17/2017

I.S. EN ISO 6553:2017 Automatic steam traps - Marking (ISO 6553:2016) CEN 2/5/2017

I.S. EN ISO 6571:2009/A1:2017Spices, condiments and herbs - Determination of volatile oil content(hydrodistillation method) - Amendment 1 (ISO 6571:2008/Amd 1:2017) CEN 12/24/2017

I.S. EN ISO 6579-1:2017Microbiology of the food chain - Horizontal method for the detection,enumeration and serotyping of Salmonella - Part 1: Detection of Salmonella spp.(ISO 6579-1:2017)

CEN 3/26/2017

I.S. EN ISO 6710:2017Single-use containers for human venous blood specimen collection (ISO6710:2017) CEN 9/24/2017

I.S. EN ISO 6789-1:2017Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirementsand methods for design conformance testing and quality conformance testing:minimum requirements for declaration of conformance (ISO 6789-1:2017)

CEN 3/26/2017

I.S. EN ISO 6789-2:2017Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirementsfor calibration and determination of measurement uncertainty (ISO6789-2:2017)

CEN 3/26/2017

I.S. EN ISO 6803:2017Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse testwithout flexing (ISO 6803:2017) CEN 4/2/2017

I.S. EN ISO 6806:2017Rubber hoses and hose assemblies for use in oil burners - Specification (ISO6806:2017) CEN 7/9/2017

I.S. EN ISO 6883:2017Animal and vegetable fats and oils - Determination of conventional mass pervolume (litre weight in air) (ISO 6883:2017) CEN 3/6/2017

I.S. EN ISO 6887-1:2017Microbiology of the food chain - Preparation of test samples, initial suspensionand decimal dilutions for microbiological examination - Part 1: General rules forthe preparation of the initial suspension and decimal dilutions (ISO 6887-1:201..

CEN 4/23/2017

I.S. EN ISO 6887-2:2017Microbiology of the food chain - Preparation of test samples, initial suspensionand decimal dilutions for microbiological examination - Part 2: Specific rules forthe preparation of meat and meat products (ISO 6887-2:2017)

CEN 4/23/2017

I.S. EN ISO 6887-3:2017Microbiology of the food chain - Preparation of test samples, initial suspensionand decimal dilutions for microbiological examination - Part 3: Specific rules forthe preparation of fish and fishery products (ISO 6887-3:2017)

CEN 4/23/2017

I.S. EN ISO 6887-4:2017Microbiology of the food chain - Preparation of test samples, initial suspensionand decimal dilutions for microbiological examination - Part 4: Specific rules forthe preparation of miscellaneous products (ISO 6887-4:2017)

CEN 4/23/2017

I.S. EN ISO 6946:2017Building components and building elements - Thermal resistance and thermaltransmittance - Calculation methods (ISO 6946:2017) CEN 8/6/2017

I.S. EN ISO 7010:2012/A7:2017Graphical symbols - Safety colours and safety signs - Registered safety signs -Amendment 7 (ISO 7010:2011/Amd 7:2016) CEN 6/4/2017

I.S. EN ISO 7029:2017Acoustics - Statistical distribution of hearing thresholds related to age andgender (ISO 7029:2017) CEN 2/12/2017

I.S. EN ISO 7198:2017Cardiovascular implants and extracorporeal systems - Vascular prostheses -Tubular vascular grafts and vascular patches (ISO 7198:2016) CEN 3/24/2017

I.S. EN ISO 7199:2017Cardiovascular implants and artificial organs - Blood-gas exchangers(oxygenators) (ISO 7199:2016) CEN 2/12/2017

I.S. EN ISO 7243:2017Ergonomics of the thermal environment - Assessment of heat stress using theWBGT (wet bulb globe temperature) index (ISO 7243:2017) CEN 10/1/2017

I.S. EN ISO 7250-1:2017Basic human body measurements for technological design - Part 1: Bodymeasurement definitions and landmarks (ISO 7250-1:2017) CEN 10/15/2017

I.S. EN ISO 7787-3:2017Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines (ISO7787-3:2017) CEN 6/11/2017

I.S. EN ISO 8033:2017 Rubber and plastics hoses - Determination of adhesion between components(ISO 8033:2016)

CEN 2/5/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 7787-3:2017Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines (ISO7787-3:2017) CEN 6/11/2017

I.S. EN ISO 8033:2017Rubber and plastics hoses - Determination of adhesion between components(ISO 8033:2016) CEN 2/5/2017

I.S. EN ISO 8041-1:2017Human response to vibration - Measuring instrumentation - Part 1: Generalpurpose vibration meters (ISO 8041-1:2017) CEN 6/11/2017

I.S. EN ISO 8394-2:2017Buildings and civil engineering works - Determination of extrudability for sealant- Part 2: Using standardized apparatus (ISO 8394-2:2017) CEN 12/10/2017

I.S. EN ISO 8401:2017Metallic coatings - Review of methods of measurement of ductility (ISO8401:2017) CEN 3/6/2017

I.S. EN ISO 8502-2:2017Preparation of steel substrates before application of paints and related products- Tests for the assessment of surface cleanliness - Part 2: Laboratorydetermination of chloride on cleaned surfaces (ISO 8502-2:2017)

CEN 2/27/2017

I.S. EN ISO 8502-3:2017Preparation of steel substrates before application of paints and related products- Tests for the assessment of surface cleanliness - Part 3: Assessment of duston steel surfaces prepared for painting (pressure-sensitive tape method) (ISO ..

CEN 2/27/2017

I.S. EN ISO 8502-4:2017Preparation of steel substrates before application of paints and related products- Tests for the assessment of surface cleanliness - Part 4: Guidance on theestimation of the probability of condensation prior to paint application (ISO 85..

CEN 2/27/2017

I.S. EN ISO 8503-5:2017Preparation of steel substrates before application of paints and related products- Surface roughness characteristics of blast-cleaned steel substrates - Part 5:Replica tape method for the determination of the surface profile (ISO 8503-5:2..

CEN 4/2/2017

I.S. EN ISO 8534:2017Animal and vegetable fats and oils - Determination of water content - KarlFischer method (pyridine free) (ISO 8534:2017) CEN 3/6/2017

I.S. EN ISO 8665:2017Small craft - Marine propulsion reciprocating internal combustion engines -Power measurements and declarations (ISO 8665:2006) CEN 8/20/2017

I.S. EN ISO 8846:2017Small craft - Electrical devices - Protection against ignition of surroundingflammable gases (ISO 8846:1990) CEN 9/10/2017

I.S. EN ISO 8847:2017 Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004) CEN 8/20/2017

I.S. EN ISO 8848:2017 Small craft - Remote steering systems (ISO 8848:1990) CEN 9/10/2017

I.S. EN ISO 8936:2017Awnings for leisure accommodation vehicles - Requirements and test methods(ISO 8936:2017) CEN 2/12/2017

I.S. EN ISO 8980-1:2017Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications forsingle-vision and multifocal lenses (ISO 8980-1:2017) CEN 9/17/2017

I.S. EN ISO 8980-2:2017Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications forpower-variation lenses (ISO 8980-2:2017) CEN 9/17/2017

I.S. EN ISO 9013:2017Thermal cutting - Classification of thermal cuts - Geometrical productspecification and quality tolerances (ISO 9013:2017) CEN 3/6/2017

I.S. EN ISO 9094:2017 Small craft - Fire protection (ISO 9094:2015) CEN 9/4/2017

I.S. EN ISO 9097:2017 Small craft - Electric fans (ISO 9097:1991) CEN 8/20/2017

I.S. EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) CEN 4/23/2017

I.S. EN ISO 9241-112:2017Ergonomics of human-system interaction - Part 112: Principles for thepresentation of information (ISO 9241-112:2017) CEN 4/9/2017

I.S. EN ISO 9241-125:2017Ergonomics of human-system interaction - Part 125: Guidance on visualpresentation of information (ISO 9241-125:2017) CEN 11/5/2017

I.S. EN ISO 9241-333:2017Ergonomics of human-system interaction - Part 333: Stereoscopic displays usingglasses (ISO 9241-333:2017) CEN 6/4/2017

I.S. EN ISO 9241-392:2017Ergonomics of human-system interaction - Part 392: Ergonomicrecommendations for the reduction of visual fatigue from stereoscopic images(ISO 9241-392:2015)

CEN 3/24/2017

I.S. EN ISO 9241-960:2017Ergonomics of human-system interaction - Part 960: Framework and guidancefor gesture interactions (ISO 9241-960:2017) CEN 11/13/2017

I.S. EN ISO 9308-1:2014/A1:2017Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1:Membrane filtration method for waters with low bacterial background flora (ISO9308-1:2014/Amd 1:2016)

CEN 2/12/2017

I.S. EN ISO 9405:2017 Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015)CEN 7/2/2017

I.S. EN ISO 9455-11:2017Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO9455-11:2017) CEN 10/9/2017

I.S. EN ISO 9455-13:2017Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering(ISO 9455-13:2017) CEN 10/9/2017

I.S. EN ISO 9455-14:2017Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of fluxresidues (ISO 9455-14:2017) CEN 10/9/2017

I.S. EN ISO 9455-15:2017Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO9455-15:2017) CEN 10/1/2017

I.S. EN ISO 9606-1:2017Qualification testing of welders - Fusion welding - Part 1: Steels (ISO9606-1:2012 including Cor 1:2012 and Cor 2:2013) CEN 9/10/2017

I.S. EN ISO 9696:2017Water quality - Gross alpha activity - Test method using thick source (ISO9696:2017) CEN 12/3/2017

I.S. EN ISO 9697:2017 Water quality - Gross beta activity in non-saline water - Test method using thicksource (ISO 9697:2015)

CEN 7/2/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 9696:2017Water quality - Gross alpha activity - Test method using thick source (ISO9696:2017) CEN 12/3/2017

I.S. EN ISO 9697:2017Water quality - Gross beta activity in non-saline water - Test method using thicksource (ISO 9697:2015) CEN 7/2/2017

I.S. EN ISO 9717:2017Metallic and other inorganic coatings - Phosphate conversion coating of metals(ISO 9717:2017) CEN 11/13/2017

I.S. EN ISO 9775:2017Small craft - Remote steering systems for single outboard motors of 15 kW to40 kW power (ISO 9775:1990) CEN 9/10/2017

I.S. EN ISO 9806:2017 Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017) CEN 12/3/2017

I.S. EN ISO 9852:2017Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance atspecified temperature (DCMT) - Test method (ISO 9852:2007) CEN 11/5/2017

I.S. EN ISO 9873:2017 Dentistry - Intra-oral mirrors (ISO 9873:2017) CEN 6/4/2017

I.S. EN ISO 9917-2:2017Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO9917-2:2017) CEN 10/9/2017

I.S. EN ISO 9934-1:2016Non-destructive testing - Magnetic particle testing - Part 1: General principles(ISO 9934-1:2016) CEN 1/1/2017

I.S. EN ISO 10075-1:2017Ergonomic principles related to mental workload - Part 1: General issues andconcepts, terms and definitions (ISO 10075-1:2017) CEN 11/13/2017

I.S. EN ISO 10077-1:2017Thermal performance of windows, doors and shutters - Calculation of thermaltransmittance - Part 1: General (ISO 10077-1:2017) CEN 8/6/2017

I.S. EN ISO 10077-2:2017Thermal performance of windows, doors and shutters - Calculation of thermaltransmittance - Part 2: Numerical method for frames (ISO 10077-2:2017) CEN 8/6/2017

I.S. EN ISO 10088:2017 Small craft - Permanently installed fuel systems (ISO 10088:2013) CEN 8/20/2017

I.S. EN ISO 10133:2017Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO10133:2012) CEN 8/20/2017

I.S. EN ISO 10156:2017Gas cylinders - Gases and gas mixtures - Determination of fire potential andoxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017) CEN 9/17/2017

I.S. EN ISO 10210:2017Plastics - Methods for the preparation of samples for biodegradation testing ofplastic materials (ISO 10210:2012) CEN 12/24/2017

I.S. EN ISO 10211:2017Thermal bridges in building construction - Heat flows and surface temperatures- Detailed calculations (ISO 10211:2017) CEN 8/6/2017

I.S. EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) CEN 9/10/2017

I.S. EN ISO 10256-1:2016Protective equipment for use in ice hockey - Part 1: General requirements (ISO10256-1:2016) CEN 1/1/2017

I.S. EN ISO 10272-1:2017Microbiology of the food chain - Horizontal method for detection andenumeration of Campylobacter spp. - Part 1: Detection method (ISO10272-1:2017)

CEN 7/23/2017

I.S. EN ISO 10272-2:2017Microbiology of the food chain - Horizontal method for detection andenumeration of Campylobacter spp. - Part 2: Colony-count technique (ISO10272-2:2017)

CEN 7/23/2017

I.S. EN ISO 10273:2017Microbiology of the food chain - Horizontal method for the detection ofpathogenic Yersinia enterocolitica (ISO 10273:2017) CEN 5/14/2017

I.S. EN ISO 10297:2014/A1:2017Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1:Pressure drums and tubes (ISO 10297:2014/Amd 1:2017) CEN 5/14/2017

I.S. EN ISO 10350-1:2017Plastics - Acquisition and presentation of comparable single-point data - Part 1:Moulding materials (ISO 10350-1:2017) CEN 12/17/2017

I.S. EN ISO 10555-6:2017Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneousimplanted ports (ISO 10555-6:2015) CEN 9/10/2017

I.S. EN ISO 10563:2017Buildings and civil engineering works - Sealants - Determination of change inmass and volume (ISO 10563:2017) CEN 7/9/2017

I.S. EN ISO 10592:2017 Small craft - Hydraulic steering systems (ISO 10592:1994) CEN 9/10/2017

I.S. EN ISO 10675-1:2016Non-destructive testing of welds - Acceptance levels for radiographic testing -Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016) CEN 1/16/2017

I.S. EN ISO 10675-2:2017Non-destructive testing of welds - Acceptance levels for radiographic testing -Part 2: Aluminium and its alloys (ISO 10675-2:2017) CEN 12/3/2017

I.S. EN ISO 10848-1:2017Acoustics - Laboratory and field measurement of flanking transmission forairborne, impact and building service equipment sound between adjoiningrooms - Part 1: Frame document (ISO 10848-1:2017)

CEN 11/13/2017

I.S. EN ISO 10848-2:2017Acoustics - Laboratory and field measurement of flanking transmission forairborne, impact and building service equipment sound between adjoiningrooms - Part 2: Application to Type B elements when the junction has a small i..

CEN 11/13/2017

I.S. EN ISO 10848-3:2017Acoustics - Laboratory and field measurement of flanking transmission forairborne, impact and building service equipment sound between adjoiningrooms - Part 3: Application to Type B elements when the junction has a substa..

CEN 11/13/2017

I.S. EN ISO 10848-4:2017Acoustics - Laboratory and field measurement of flanking transmission forairborne, impact and building service equipment sound between adjoiningrooms - Part 4: Application to junctions with at least one Type A element (ISO ..

CEN 11/13/2017

I.S. EN ISO 10939:2017 Ophthalmic instruments - Slit-lamp microscopes (ISO 10939:2017) CEN 6/25/2017

I.S. EN ISO 10993-4:2017 Biological evaluation of medical devices - Part 4: Selection of tests forinteractions with blood (ISO 10993-4:2017)

CEN 11/5/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 10939:2017 Ophthalmic instruments - Slit-lamp microscopes (ISO 10939:2017) CEN 6/25/2017

I.S. EN ISO 10993-4:2017Biological evaluation of medical devices - Part 4: Selection of tests forinteractions with blood (ISO 10993-4:2017) CEN 11/5/2017

I.S. EN ISO 10993-6:2016Biological evaluation of medical devices - Part 6: Tests for local effects afterimplantation (ISO 10993-6:2016) CEN 1/1/2017

I.S. EN ISO 10993-16:2017Biological evaluation of medical devices - Part 16: Toxicokinetic study design fordegradation products and leachables (ISO 10993-16:2017) CEN 12/24/2017

I.S. EN ISO 11073-00103:2017Health informatics - Personal health device communication - Part 00103:Overview (ISO/IEEE 11073-00103:2015) CEN 3/6/2017

I.S. EN ISO 11073-10101:2005/A1:2017Health informatics - Point-of-care medical device communication - Part 10101:Nomenclature - Amendment 1: Additional definitions (ISO/IEEE11073-10101:2004/Amd 1:2017)

CEN 12/17/2017

I.S. EN ISO 11073-10417:2017Health informatics - Personal health device communication - Part 10417: Devicespecialization - Glucose meter (ISO/IEEE 11073-10417:2017) CEN 6/4/2017

I.S. EN ISO 11073-10441:2017Health informatics - Personal health device communication - Part 10441: Devicespecialization - Cardiovascular fitness and activity monitor (ISO/IEEE11073-10441:2015)

CEN 3/6/2017

I.S. EN ISO 11073-10442:2017Health informatics - Personal health device communication - Part 10442: Devicespecialization - Strength fitness equipment (ISO/IEEE 11073-10442:2015,Corrected version 2017-11-01)

CEN 3/6/2017

I.S. EN ISO 11105:2017Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO11105:1997) CEN 10/15/2017

I.S. EN ISO 11114-1:2012/A1:2017Gas cylinders - Compatibility of cylinder and valve materials with gas contents -Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017) CEN 2/27/2017

I.S. EN ISO 11114-4:2017Transportable gas cylinders - Compatibility of cylinder and valve materials withgas contents - Part 4: Test methods for selecting steels resistant to hydrogenembrittlement (ISO 11114-4:2017)

CEN 5/14/2017

I.S. EN ISO 11121:2017Recreational diving services - Requirements for introductory programmes toscuba diving (ISO 11121:2017) CEN 4/16/2017

I.S. EN ISO 11126-10:2017Preparation of steel substrates before application of paints and related products- Specifications for non-metallic blast-cleaning abrasives - Part 10: Almanditegarnet (ISO 11126-10:2017)

CEN 12/31/2017

I.S. EN ISO 11132:2017Sensory analysis - Methodology - Guidelines for monitoring the performance ofa quantitative sensory panel (ISO 11132:2012) CEN 6/11/2017

I.S. EN ISO 11136:2017Sensory analysis - Methodology - General guidance for conducting hedonic testswith consumers in a controlled area (ISO 11136:2014) CEN 6/11/2017

I.S. EN ISO 11137-3:2017Sterilization of health care products - Radiation - Part 3: Guidance on dosimetricaspects of development, validation and routine control (ISO 11137-3:2017) CEN 8/13/2017

I.S. EN ISO 11138-1:2017Sterilization of health care products - Biological indicators - Part 1: Generalrequirements (ISO 11138-1:2017) CEN 4/16/2017

I.S. EN ISO 11138-2:2017Sterilization of health care products - Biological indicators - Part 2: Biologicalindicators for ethylene oxide sterilization processes (ISO 11138-2:2017) CEN 4/16/2017

I.S. EN ISO 11138-3:2017Sterilization of health care products - Biological indicators - Part 3: Biologicalindicators for moist heat sterilization processes (ISO 11138-3:2017) CEN 4/16/2017

I.S. EN ISO 11138-4:2017Sterilization of health care products - Biological indicators - Part 4: Biologicalindicators for dry heat sterilization processes (ISO 11138-4:2017) CEN 4/16/2017

I.S. EN ISO 11138-5:2017Sterilization of health care products - Biological indicators - Part 5: Biologicalindicators for low-temperature steam and formaldehyde sterilization processes(ISO 11138-5:2017)

CEN 4/16/2017

I.S. EN ISO 11173:2017Thermoplastics pipes - Determination of resistance to external blows - Staircasemethod (ISO 11173:1994) CEN 11/5/2017

I.S. EN ISO 11272:2017Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 4/16/2017

I.S. EN ISO 11290-1:2017Microbiology of the food chain - Horizontal method for the detection andenumeration of Listeria monocytogenes and of Listeria spp. - Part 1: Detectionmethod (ISO 11290-1:2017)

CEN 7/2/2017

I.S. EN ISO 11290-2:2017Microbiology of the food chain - Horizontal method for the detection andenumeration of Listeria monocytogenes and of Listeria spp. - Part 2:Enumeration method (ISO 11290-2:2017)

CEN 7/2/2017

I.S. EN ISO 11295:2017Classification and information on design and applications of plastics pipingsystems used for renovation and replacement (ISO 11295:2017) CEN 12/24/2017

I.S. EN ISO 11363-2:2017Gas cylinders - 17E and 25E taper threads for connection of valves to gascylinders - Part 2: Inspection gauges (ISO 11363-2:2017) CEN 12/24/2017

I.S. EN ISO 11378-2:2001/A1:2017Textile floor coverings - Laboratory soiling tests - Part 2: Drum test -Amendment 1 (ISO 11378-2:2001/Amd 1:2017) CEN 8/20/2017

I.S. EN ISO 11504:2017Soil quality - Assessment of impact from soil contaminated with petroleumhydrocarbons (ISO 11504:2017) CEN 10/15/2017

I.S. EN ISO 11508:2017 Soil quality - Determination of particle density (ISO 11508:2017) CEN 12/10/2017

I.S. EN ISO 11554:2017Optics and photonics - Lasers and laser-related equipment - Test methods forlaser beam power, energy and temporal characteristics (ISO 11554:2017) CEN 9/24/2017

I.S. EN ISO 11607-1:2017Packaging for terminally sterilized medical devices - Part 1: Requirements formaterials, sterile barrier systems and packaging systems (ISO 11607-1:2006,including Amd 1:2014)

CEN 8/6/2017

I.S. EN ISO 11607-2:2017Packaging for terminally sterilized medical devices - Part 2: Validationrequirements for forming, sealing and assembly processes (ISO 11607-2:2006,including Amd 1:2014)

CEN 8/6/2017

I.S. EN ISO 11608-7:2017 Needle-based injection systems for medical use - Requirements and testmethods - Part 7: Accessibility for persons with visual impairment (ISO11608-7:2016)

CEN 8/20/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 11607-2:2017

Packaging for terminally sterilized medical devices - Part 2: Validationrequirements for forming, sealing and assembly processes (ISO 11607-2:2006,including Amd 1:2014) CEN 8/6/2017

I.S. EN ISO 11608-7:2017Needle-based injection systems for medical use - Requirements and testmethods - Part 7: Accessibility for persons with visual impairment (ISO11608-7:2016)

CEN 8/20/2017

I.S. EN ISO 11609:2017Dentistry - Dentifrices - Requirements, test methods and marking (ISO11609:2017) CEN 7/9/2017

I.S. EN ISO 11615:2017Health informatics - Identification of medicinal products - Data elements andstructures for the unique identification and exchange of regulated medicinalproduct information (ISO 11615:2017)

CEN 12/24/2017

I.S. EN ISO 11616:2017Health informatics - Identification of medicinal products - Data elements andstructures for the Unique Identification and Exchange of regulatedPharmaceutical Product Information (ISO 11616:2017)

CEN 12/24/2017

I.S. EN ISO 11681-2:2011/A1:2017Machinery for forestry - Portable chain-saw safety requirements and testing -Part 2: Chain-saws for tree service (ISO 11681-2:2011/Amd 1:2017) CEN 6/4/2017

I.S. EN ISO 11731:2017 Water quality - Enumeration of Legionella (ISO 11731:2017) CEN 6/25/2017

I.S. EN ISO 11746:2012/A1:2017Rice - Determination of biometric characteristics of kernels - Amendment 1 (ISO11746:2012/Amd 1:2017) CEN 12/24/2017

I.S. EN ISO 11819-2:2017Acoustics - Measurement of the influence of road surfaces on traffic noise - Part2: The close-proximity method (ISO 11819-2:2017) CEN 5/14/2017

I.S. EN ISO 11978:2017Ophthalmic optics - Contact lenses and contact lens care products - Labelling(ISO 11978:2017) CEN 10/1/2017

I.S. EN ISO 11979-8:2017Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements(ISO 11979-8:2017) CEN 5/28/2017

I.S. EN ISO 11997-1:2017Paints and varnishes - Determination of resistance to cyclic corrosion conditions- Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) CEN 10/15/2017

I.S. EN ISO 12052:2017Health informatics - Digital imaging and communication in medicine (DICOM)including workflow and data management (ISO 12052:2017) CEN 10/1/2017

I.S. EN ISO 12099:2017Animal feeding stuffs, cereals and milled cereal products - Guidelines for theapplication of near infrared spectrometry (ISO 12099:2017) CEN 10/9/2017

I.S. EN ISO 12209:2013/A1:2016Gas cylinders - Outlet connections for gas cylinder valves for compressedbreathable air - Amendment 1: Outlet connection up to a maximum cylinderworking pressure of 500 bar (ISO 12209:2013/Amd 1:2016, Corrected version ..

CEN 1/16/2017

I.S. EN ISO 12217-1:2017Small craft - Stability and buoyancy assessment and categorization - Part 1:Non-sailing boats of hull length greater than or equal to 6 m (ISO12217-1:2015)

CEN 10/15/2017

I.S. EN ISO 12217-2:2017Small craft - Stability and buoyancy assessment and categorization - Part 2:Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) CEN 10/15/2017

I.S. EN ISO 12217-3:2017Small craft - Stability and buoyancy assessment and categorization - Part 3:Boats of hull length less than 6 m (ISO 12217-3:2015) CEN 8/27/2017

I.S. EN ISO 12354-1:2017Building acoustics - Estimation of acoustic performance of buildings from theperformance of elements - Part 1: Airborne sound insulation between rooms(ISO 12354-1:2017)

CEN 9/3/2017

I.S. EN ISO 12354-2:2017Building acoustics - Estimation of acoustic performance of buildings from theperformance of elements - Part 2: Impact sound insulation between rooms (ISO12354-2:2017)

CEN 9/3/2017

I.S. EN ISO 12354-3:2017Building acoustics - Estimation of acoustic performance of buildings from theperformance of elements - Part 3: Airborne sound insulation against outdoorsound (ISO 12354-3:2017)

CEN 9/3/2017

I.S. EN ISO 12354-4:2017Building acoustics - Estimation of acoustic performance of buildings from theperformance of elements - Part 4: Transmission of indoor sound to the outside(ISO 12354-4:2017)

CEN 9/3/2017

I.S. EN ISO 12569:2017Thermal performance of buildings and materials - Determination of specificairflow rate in buildings - Tracer gas dilution method (ISO 12569:2017) CEN 10/1/2017

I.S. EN ISO 12617:2017Road vehicles - Liquefied natural gas (LNG) refuelling connector - 3,1 MPaconnector (ISO 12617:2015, Corrected version 2016-01-15) CEN 4/30/2017

I.S. EN ISO 12625-4:2016Tissue paper and tissue products - Part 4: Determination of tensile strength,stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) CEN 1/16/2017

I.S. EN ISO 12625-5:2016Tissue paper and tissue products - Part 5: Determination of wet tensile strength(ISO 12625-5:2016) CEN 1/16/2017

I.S. EN ISO 12625-6:2016Tissue paper and tissue products - Part 6: Determination of grammage (ISO12625-6:2016) CEN 1/16/2017

I.S. EN ISO 12631:2017Thermal performance of curtain walling - Calculation of thermal transmittance(ISO 12631:2017) CEN 8/6/2017

I.S. EN ISO 12696:2016 Cathodic protection of steel in concrete (ISO 12696:2016) CEN 1/16/2017

I.S. EN ISO 12813:2015/A1:2017Electronic fee collection - Compliance check communication for autonomoussystems - Amendment 1 (ISO 12813:2015/Amd 1:2017) CEN 7/16/2017

I.S. EN ISO 12947-2:2016Textiles - Determination of the abrasion resistance of fabrics by the Martindalemethod - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) CEN 1/1/2017

I.S. EN ISO 12966-2:2017Animal and vegetable fats and oils - Gas chromatography of fatty acid methylesters - Part 2: Preparation of methyl esters of fatty acids (ISO 12966-2:2017) CEN 5/14/2017

I.S. EN ISO 13141:2015/A1:2017Electronic fee collection - Localisation augmentation communication forautonomous systems - Amendment 1 (ISO 13141:2015/Amd 1:2017) CEN 7/16/2017

I.S. EN ISO 13254:2017Thermoplastics piping systems for non-pressure applications - Test method forwatertightness (ISO 13254:2010) CEN 11/5/2017

I.S. EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings -Test method for airtightness of joints (ISO 13255:2010)

CEN 11/5/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 13254:2017Thermoplastics piping systems for non-pressure applications - Test method forwatertightness (ISO 13254:2010) CEN 11/5/2017

I.S. EN ISO 13255:2017Thermoplastics piping systems for soil and waste discharge inside buildings -Test method for airtightness of joints (ISO 13255:2010) CEN 11/5/2017

I.S. EN ISO 13257:2017Thermoplastics piping systems for non-pressure applications - Test method forresistance to elevated temperature cycling (ISO 13257:2010) CEN 11/5/2017

I.S. EN ISO 13260:2011/A1:2017Thermoplastics piping systems for non-pressure underground drainage andsewerage - Test method for resistance to combined temperature cycling andexternal loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)

CEN 10/15/2017

I.S. EN ISO 13262:2017Thermoplastics piping systems for non-pressure underground drainage andsewerage - Thermoplastics spirally-formed structured-wall pipes - Determinationof the tensile strength of a seam (ISO 13262:2010)

CEN 11/5/2017

I.S. EN ISO 13263:2017Thermoplastics piping systems for non-pressure underground drainage andsewerage - Thermoplastics fittings - Test method for impact strength (ISO13263:2010)

CEN 11/5/2017

I.S. EN ISO 13264:2017Thermoplastics piping systems for non-pressure underground drainage andsewerage - Thermoplastics fittings - Test method for mechanical strength orflexibility of fabricated fittings (ISO 13264:2010)

CEN 11/5/2017

I.S. EN ISO 13370:2017Thermal performance of buildings - Heat transfer via the ground - Calculationmethods (ISO 13370:2017) CEN 8/6/2017

I.S. EN ISO 13506-1:2017Protective clothing against heat and flame - Part 1: Test method for completegarments - Measurement of transferred energy using an instrumented manikin(ISO 13506-1:2017)

CEN 9/4/2017

I.S. EN ISO 13567-1:2017Technical product documentation - Organization and naming of layers for CAD -Part 1: Overview and principles (ISO 13567-1:2017) CEN 11/29/2017

I.S. EN ISO 13567-2:2017Technical product documentation - Organization and naming of layers for CAD -Part 2: Concepts, format and codes used in construction documentation (ISO13567-2:2017)

CEN 12/3/2017

I.S. EN ISO 13693-1:2017Irrigation equipment - Safety devices for chemigation - Part 1: Small plasticsvalves for chemigation (ISO 13693-1:2013) CEN 3/24/2017

I.S. EN ISO 13786:2017Thermal performance of building components - Dynamic thermal characteristics- Calculation methods (ISO 13786:2017) CEN 8/6/2017

I.S. EN ISO 13789:2017Thermal performance of buildings - Transmission and ventilation heat transfercoefficients - Calculation method (ISO 13789:2017) CEN 8/6/2017

I.S. EN ISO 13843:2017Water quality - Requirements for establishing performance characteristics ofquantitative microbiological methods (ISO 13843:2017) CEN 7/30/2017

I.S. EN ISO 13916:2017Welding - Measurement of preheating temperature, interpass temperature andpreheat maintenance temperature (ISO 13916:2017) CEN 12/24/2017

I.S. EN ISO 13929:2017 Small craft - Steering gear - Geared link systems (ISO 13929:2001) CEN 9/4/2017

I.S. EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017) CEN 9/17/2017

I.S. EN ISO 14232-1:2017Thermal spraying - Powders - Part 1: Characterization and technical supplyconditions (ISO 14232-1:2017) CEN 5/14/2017

I.S. EN ISO 14246:2014/A1:2017Gas cylinders - Cylinder valves - Manufacturing tests and examinations -Amendment 1 (ISO 14246:2014/Amd 1:2017) CEN 8/27/2017

I.S. EN ISO 14253-1:2017Geometrical product specifications (GPS) - Inspection by measurement ofworkpieces and measuring equipment - Part 1: Decision rules for verifyingconformity or nonconformity with specifications (ISO 14253-1:2017)

CEN 12/24/2017

I.S. EN ISO 14271:2017Resistance welding - Vickers hardness testing (low-force and microhardness) ofresistance spot, projection, and seam welds (ISO 14271:2017) CEN 10/15/2017

I.S. EN ISO 14343:2017Welding consumables - Wire electrodes, strip electrodes, wires and rods for arcwelding of stainless and heat resisting steels - Classification (ISO 14343:2017) CEN 5/14/2017

I.S. EN ISO 14362-1:2017Textiles - Methods for determination of certain aromatic amines derived fromazo colorants - Part 1: Detection of the use of certain azo colorants accessiblewith and without extracting the fibres (ISO 14362-1:2017)

CEN 2/27/2017

I.S. EN ISO 14362-3:2017 Textiles - Methods for determination of certain aromatic amines derived fromazo colorants - Part 3: Detection of the use of certain azo colorants, which mayrelease 4-aminoazobenzene (ISO 14362-3:2017)

CEN 2/27/2017

I.S. EN ISO 14405-3:2017Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3:Angular sizes (ISO 14405-3:2016) CEN 2/5/2017

I.S. EN ISO 14457:2017 Dentistry - Handpieces and motors (ISO 14457:2017) CEN 12/24/2017

I.S. EN ISO 14469:2017Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO14469:2017) CEN 10/9/2017

I.S. EN ISO 14532:2017 Natural gas - Vocabulary (ISO 14532:2014) CEN 3/6/2017

I.S. EN ISO 14555:2017 Welding - Arc stud welding of metallic materials (ISO 14555:2017) CEN 7/2/2017

I.S. EN ISO 14644-13:2017Cleanrooms and associated controlled environments - Part 13: Cleaning ofsurfaces to achieve defined levels of cleanliness in terms of particle andchemical classifications (ISO 14644-13:2017)

CEN 8/27/2017

I.S. EN ISO 14644-15:2017Cleanrooms and associated controlled environments - Part 15: Assessment ofsuitability for use of equipment and materials by airborne chemicalconcentration (ISO 14644-15:2017)

CEN 12/24/2017

I.S. EN ISO 14683:2017Thermal bridges in building construction - Linear thermal transmittance -Simplified methods and default values (ISO 14683:2017) CEN 8/6/2017

I.S. EN ISO 14692-1:2017Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping -Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017) CEN 10/1/2017

I.S. EN ISO 14692-2:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping -Part 2: Qualification and manufacture (ISO 14692-2:2017)

CEN 10/1/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 14692-1:2017Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping -Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017) CEN 10/1/2017

I.S. EN ISO 14692-2:2017Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping -Part 2: Qualification and manufacture (ISO 14692-2:2017) CEN 10/1/2017

I.S. EN ISO 14692-3:2017Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping -Part 3: System design (ISO 14692-3:2017) CEN 10/1/2017

I.S. EN ISO 14692-4:2017Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping -Part 4: Fabrication, installation and operation (ISO 14692-4:2017) CEN 10/1/2017

I.S. EN ISO 14713-1:2017Zinc coatings - Guidelines and recommendations for the protection againstcorrosion of iron and steel in structures - Part 1: General principles of designand corrosion resistance (ISO 14713-1:2017)

CEN 5/28/2017

I.S. EN ISO 14713-3:2017Zinc coatings - Guidelines and recommendations for the protection againstcorrosion of iron and steel in structures - Part 3: Sherardizing (ISO14713-3:2017)

CEN 5/28/2017

I.S. EN ISO 14780:2017 Solid biofuels - Sample preparation (ISO 14780:2017) CEN 6/4/2017

I.S. EN ISO 14823:2017 Intelligent transport systems - Graphic data dictionary (ISO 14823:2017) CEN 6/11/2017

I.S. EN ISO 14853:2017Plastics - Determination of the ultimate anaerobic biodegradation of plasticmaterials in an aqueous system - Method by measurement of biogas production(ISO 14853:2016)

CEN 12/24/2017

I.S. EN ISO 14889:2013/A1:2017Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncutfinished lenses - Amendment 1 (ISO 14889:2013/Amd 1:2017) CEN 12/24/2017

I.S. EN ISO 14903:2017Refrigerating systems and heat pumps - Qualification of tightness ofcomponents and joints (ISO 14903:2017) CEN 8/27/2017

I.S. EN ISO 14916:2017Thermal spraying - Determination of tensile adhesive strength (ISO14916:2017) CEN 4/9/2017

I.S. EN ISO 14917:2017 Thermal spraying - Terminology, classification (ISO 14917:2017) CEN 4/9/2017

I.S. EN ISO 15005:2017Road vehicles - Ergonomic aspects of transportation and control systems -Dialogue management principles and compliance procedures (ISO 15005:2017) CEN 4/2/2017

I.S. EN ISO 15008:2017Road vehicles - Ergonomic aspects of transport information and control systems- Specifications and test procedures for in-vehicle visual presentation (ISO15008:2017)

CEN 4/2/2017

I.S. EN ISO 15023-1:2017Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system andbasis for specifications (ISO 15023-1:2017) CEN 5/14/2017

I.S. EN ISO 15025:2016Protective clothing - Protection against flame - Method of test for limited flamespread (ISO 15025:2016) CEN 1/1/2017

I.S. EN ISO 15110:2017Paints and varnishes - Artificial weathering including acidic deposition (ISO15110:2017) CEN 10/1/2017

I.S. EN ISO 15216-1:2017Microbiology of the food chain - Horizontal method for determination ofhepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method forquantification (ISO 15216-1:2017)

CEN 4/16/2017

I.S. EN ISO 15223-1:2016Medical devices - Symbols to be used with medical device labels, labelling andinformation to be supplied - Part 1: General requirements (ISO 15223-1:2016,Corrected version 2017-03)

CEN 1/17/2017

I.S. EN ISO 15236-2:2017 Steel cord conveyor belts - Part 2: Preferred belt types (ISO 15236-2:2017) CEN 2/12/2017

I.S. EN ISO 15236-3:2017Steel cord conveyor belts - Part 3: Special safety requirements for belts for usein underground installations (ISO 15236-3:2017) CEN 4/23/2017

I.S. EN ISO 15257:2017Cathodic protection - Competence levels of cathodic protection persons - Basisfor certification scheme (ISO 15257:2017) CEN 7/2/2017

I.S. EN ISO 15302:2017Animal and vegetable fats and oils - Determination of benzo[a]pyrene -Reverse-phase high performance liquid chromatography method (ISO15302:2017)

CEN 5/14/2017

I.S. EN ISO 15378:2017Primary packaging materials for medicinal products - Particular requirements forthe application of ISO 9001:2015, with reference to good manufacturingpractice (GMP) (ISO 15378:2017)

CEN 11/13/2017

I.S. EN ISO 15382:2017Radiological protection - Procedures for monitoring the dose to the lens of theeye, the skin and the extremities (ISO 15382:2015) CEN 10/29/2017

I.S. EN ISO 15493:2003/A1:2017Plastics piping systems for industrial applications -Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U)and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components an..

CEN 2/12/2017

I.S. EN ISO 15584:2017Small craft - Inboard petrol engines - Engine-mounted fuel and electricalcomponents (ISO 15584:2001) CEN 9/4/2017

I.S. EN ISO 15589-1:2017Petroleum, petrochemical and natural gas industries - Cathodic protection ofpipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015) CEN 10/9/2017

I.S. EN ISO 15614-1:2017Specification and qualification of welding procedures for metallic materials -Welding procedure test - Part 1: Arc and gas welding of steels and arc weldingof nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)

CEN 7/9/2017

I.S. EN ISO 15621:2017Absorbent incontinence aids for urine and/or faeces - General guidelines onevaluation (ISO 15621:2017) CEN 7/30/2017

I.S. EN ISO 15651:2017Nuclear energy - Determination of total hydrogen content in PuO2 and UO2powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gasextraction and conductivity detection method (ISO 15651:2015)

CEN 10/29/2017

I.S. EN ISO 15652:2017Small craft - Remote steering systems for inboard mini jet boats (ISO15652:2003) CEN 9/4/2017

I.S. EN ISO 15774:2017Animal and vegetable fats and oils - Determination of cadmium content bydirect graphite furnace atomic absorption spectrometry (ISO 15774:2017) CEN 3/24/2017

I.S. EN ISO 15798:2013/A1:2017 Ophthalmic implants - Ophthalmic viscosurgical devices - Amendment 1 (ISO15798:2013/Amd 1:2017)

CEN 10/29/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 15774:2017Animal and vegetable fats and oils - Determination of cadmium content bydirect graphite furnace atomic absorption spectrometry (ISO 15774:2017) CEN 3/24/2017

I.S. EN ISO 15798:2013/A1:2017Ophthalmic implants - Ophthalmic viscosurgical devices - Amendment 1 (ISO15798:2013/Amd 1:2017) CEN 10/29/2017

I.S. EN ISO 15848-1:2015/A1:2017Industrial valves - Measurement, test and qualification procedures for fugitiveemissions - Part 1: Classification system and qualification procedures for typetesting of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)

CEN 4/9/2017

I.S. EN ISO 15876-1:2017Plastics piping systems for hot and cold water installations - Polybutene (PB) -Part 1: General (ISO 15876-1:2017) CEN 2/27/2017

I.S. EN ISO 15876-2:2017Plastics piping systems for hot and cold water installations - Polybutene (PB) -Part 2: Pipes (ISO 15876-2:2017) CEN 2/27/2017

I.S. EN ISO 15876-3:2017Plastics piping systems for hot and cold water installations - Polybutene (PB) -Part 3: Fittings (ISO 15876-3:2017) CEN 2/27/2017

I.S. EN ISO 15876-5:2017Plastics piping systems for hot and cold water installations - Polybutene (PB) -Part 5: Fitness for purpose of the system (ISO 15876-5:2017) CEN 2/27/2017

I.S. EN ISO 15985:2017Plastics - Determination of the ultimate anaerobic biodegradation underhigh-solids anaerobic-digestion conditions - Method by analysis of releasedbiogas (ISO 15985:2014)

CEN 12/24/2017

I.S. EN ISO 15996:2017Gas cylinders - Residual pressure valves - Specification and type testing ofcylinder valves incorporating residual pressure devices (ISO 15996:2017) CEN 9/24/2017

I.S. EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) CEN 4/30/2017

I.S. EN ISO 16120-1:2017Non-alloy steel wire rod for conversion to wire - Part 1: General requirements(ISO 16120-1:2017) CEN 6/25/2017

I.S. EN ISO 16120-2:2017Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirementsfor general purpose wire rod (ISO 16120-2:2017) CEN 3/24/2017

I.S. EN ISO 16120-4:2017Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirementsfor wire rod for special applications (ISO 16120-4:2017) CEN 6/25/2017

I.S. EN ISO 16147:2017Small craft - Inboard diesel engines - Engine-mounted fuel and electricalcomponents (ISO 16147:2002, including Amd 1:2013) CEN 9/4/2017

I.S. EN ISO 16212:2017 Cosmetics - Microbiology - Enumeration of yeast and mould (ISO 16212:2017) CEN 7/23/2017

I.S. EN ISO 16283-1:2014/A1:2017Acoustics - Field measurement of sound insulation in buildings and of buildingelements - Part 1: Airborne sound insulation - Amendment 1 (ISO16283-1:2014/Amd 1:2017)

CEN 12/24/2017

I.S. EN ISO 16371-2:2017Non-destructive testing - Industrial computed radiography with storagephosphor imaging plates - Part 2: General principles for testing of metallicmaterials using X-rays and gamma rays (ISO 16371-2:2017, Corrected version ..

CEN 12/3/2017

I.S. EN ISO 16396-2:2017Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparationof test specimens and determination of properties (ISO 16396-2:2017) CEN 4/9/2017

I.S. EN ISO 16407-1:2017Electronic fee collection - Evaluation of equipment for conformity to ISO17575-1 - Part 1: Test suite structure and test purposes (ISO 16407-1:2017) CEN 12/24/2017

I.S. EN ISO 16410-1:2017Electronic fee collection - Evaluation of equipment for conformity to ISO17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017) CEN 12/31/2017

I.S. EN ISO 16424:2017Nuclear energy - Evaluation of homogeneity of Gd distribution within gadoliniumfuel blends and determination of Gd2O3 content in gadolinium fuel pellets bymeasurements of uranium and gadolinium elements (ISO 16424:2012)

CEN 11/5/2017

I.S. EN ISO 16484-5:2017Building automation and control systems (BACS) - Part 5: Data communicationprotocol (ISO 16484-5:2017) CEN 8/6/2017

I.S. EN ISO 16530-1:2017Petroleum and natural gas industries - Well integrity - Part 1: Life cyclegovernance (ISO 16530-1:2017) CEN 4/9/2017

I.S. EN ISO 16610-28:2016Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: Endeffects (ISO 16610-28:2016) CEN 1/16/2017

I.S. EN ISO 16610-30:2017Geometrical product specifications (GPS) - Filtration - Part 30: Robust profilefilters: Basic concepts (ISO 16610-30:2015) CEN 1/30/2017

I.S. EN ISO 16638-1:2017Radiological protection - Monitoring and internal dosimetry for specific materials- Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) CEN 10/30/2017

I.S. EN ISO 16654:2001/A1:2017Microbiology of food and animal feeding stuffs - Horizontal method for thedetection of Escherichia coli O157 - Amendment 1: Annex B: Result ofinterlaboratory studies (ISO 16654:2001/Amd 1:2017)

CEN 5/14/2017

I.S. EN ISO 16664:2017Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO16664:2017) CEN 7/2/2017

I.S. EN ISO 16671:2015/A1:2017Ophthalmic implants - Irrigating solutions for ophthalmic surgery - Amendment1 (ISO 16671:2015/Amd 1:2017) CEN 12/10/2017

I.S. EN ISO 16773-4:2017Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallicspecimens - Part 4: Examples of spectra of polymer-coated and uncoatedspecimens (ISO 16773-4:2017)

CEN 4/30/2017

I.S. EN ISO 16890-1:2016Air filters for general ventilation - Part 1: Technical specifications, requirementsand classification system based upon particulate matter efficiency (ePM) (ISO16890-1:2016)

CEN 1/1/2017

I.S. EN ISO 16890-2:2016Air filters for general ventilation - Part 2: Measurement of fractional efficiencyand air flow resistance (ISO 16890-2:2016) CEN 1/1/2017

I.S. EN ISO 16890-3:2016Air filters for general ventilation - Part 3: Determination of the gravimetricefficiency and the air flow resistance versus the mass of test dust captured (ISO16890-3:2016)

CEN 1/1/2017

I.S. EN ISO 16890-4:2016Air filters for general ventilation - Part 4: Conditioning method to determine theminimum fractional test efficiency (ISO 16890-4:2016) CEN 1/1/2017

I.S. EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO17034:2016)

CEN 3/24/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 16890-4:2016Air filters for general ventilation - Part 4: Conditioning method to determine theminimum fractional test efficiency (ISO 16890-4:2016) CEN 1/1/2017

I.S. EN ISO 17034:2016General requirements for the competence of reference material producers (ISO17034:2016) CEN 3/24/2017

I.S. EN ISO 17075-1:2017Leather - Chemical determination of chromium(VI) content in leather - Part 1:Colorimetric method (ISO 17075-1:2017) CEN 3/6/2017

I.S. EN ISO 17075-2:2017Leather - Chemical determination of chromium(VI) content in leather - Part 2:Chromatographic method (ISO 17075-2:2017) CEN 3/24/2017

I.S. EN ISO 17099:2017Radiological protection - Performance criteria for laboratories using thecytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytesfor biological dosimetry (ISO 17099:2014)

CEN 10/29/2017

I.S. EN ISO 17100:2015/A1:2017Translation services - Requirements for translation services - Amendment 1 (ISO17100:2015/Amd 1:2017) CEN 10/29/2017

I.S. EN ISO 17231:2017Leather - Physical and mechanical tests - Determination of water repellency ofgarment leather (ISO 17231:2017) CEN 10/9/2017

I.S. EN ISO 17232:2017Leather - Physical and mechanical tests - Determination of heat resistance ofpatent leather (ISO 17232:2017) CEN 3/6/2017

I.S. EN ISO 17233:2017Leather - Physical and mechanical tests - Determination of cold cracktemperature of surface coatings (ISO 17233:2017) CEN 3/6/2017

I.S. EN ISO 17409:2017Electrically propelled road vehicles - Connection to an external electric powersupply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15) CEN 1/30/2017

I.S. EN ISO 17635:2016Non-destructive testing of welds - General rules for metallic materials (ISO17635:2016) CEN 1/1/2017

I.S. EN ISO 17637:2016Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO17637:2016) CEN 1/1/2017

I.S. EN ISO 17640:2017Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels,and assessment (ISO 17640:2017) CEN 12/17/2017

I.S. EN ISO 17664:2017Processing of health care products - Information to be provided by the medicaldevice manufacturer for the processing of medical devices (ISO 17664:2017) CEN 12/24/2017

I.S. EN ISO 17776:2016Petroleum and natural gas industries - Offshore production installations - MajorAccident hazard management during the design of new installations (ISO17776:2016)

CEN 1/16/2017

I.S. EN ISO 17781:2017Petroleum, petrochemical and natural gas industries - Test methods for qualitycontrol of microstructure of ferritic/austenitic (duplex) stainless steels (ISO17781:2017)

CEN 9/17/2017

I.S. EN ISO 17836:2017Thermal spraying - Determination of the deposition efficiency for thermalspraying (ISO 17836:2017) CEN 12/24/2017

I.S. EN ISO 17879:2017Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO17879:2017) CEN 8/27/2017

I.S. EN ISO 17892-5:2017Geotechnical investigation and testing - Laboratory testing of soil - Part 5:Incremental loading oedometer test (ISO 17892-5:2017) CEN 4/9/2017

I.S. EN ISO 17892-6:2017Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fallcone test (ISO 17892-6:2017) CEN 4/9/2017

I.S. EN ISO 18082:2014/A1:2017Anaesthetic and respiratory equipment - Dimensions of non-interchangeablescrew-threaded (NIST) low-pressure connectors for medical gases - Amendment1 (ISO 18082:2014/Amd 1:2017)

CEN 9/17/2017

I.S. EN ISO 18086:2017Corrosion of metals and alloys - Determination of AC corrosion - Protectioncriteria (ISO 18086:2015) CEN 10/9/2017

I.S. EN ISO 18125:2017 Solid biofuels - Determination of calorific value (ISO 18125:2017) CEN 6/4/2017

I.S. EN ISO 18134-2:2017Solid biofuels - Determination of moisture content - Oven dry method - Part 2:Total moisture - Simplified method (ISO 18134-2:2017) CEN 2/27/2017

I.S. EN ISO 18135:2017 Solid Biofuels - Sampling (ISO 18135:2017) CEN 5/14/2017

I.S. EN ISO 18246:2017Electrically propelled mopeds and motorcycles - Safety requirements forconductive connection to an external electric power supply (ISO 18246:2015) CEN 3/26/2017

I.S. EN ISO 18276:2017Welding consumables - Tubular cored electrodes for gas-shielded andnon-gas-shielded metal arc welding of high strength steels - Classification (ISO18276:2017)

CEN 4/23/2017

I.S. EN ISO 18278-3:2017Resistance welding - Weldability - Part 3: Evaluation procedures for weldabilityin spot weld bonding (ISO 18278-3:2017) CEN 10/1/2017

I.S. EN ISO 18295-1:2017Customer contact centres - Part 1: Requirements for customer contact centres(ISO 18295-1:2017) CEN 8/20/2017

I.S. EN ISO 18295-2:2017Customer contact centres - Part 2: Requirements for clients using the servicesof customer contact centres (ISO 18295-2:2017) CEN 8/20/2017

I.S. EN ISO 18369-1:2017Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification systemand recommendations for labelling specifications (ISO 18369-1:2017, Correctedversion 2017-10-01)

CEN 10/9/2017

I.S. EN ISO 18369-2:2017 Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2017) CEN 10/9/2017

I.S. EN ISO 18369-3:2017Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO18369-3:2017, Corrected version 2017-10-01) CEN 10/9/2017

I.S. EN ISO 18369-4:2017Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties ofcontact lens materials (ISO 18369-4:2017, Corrected version 2017-10-01) CEN 10/9/2017

I.S. EN ISO 18415:2017 Cosmetics - Microbiology - Detection of specified and non-specifiedmicroorganisms (ISO 18415:2017)

CEN 7/9/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 18369-4:2017Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties ofcontact lens materials (ISO 18369-4:2017, Corrected version 2017-10-01) CEN 10/9/2017

I.S. EN ISO 18415:2017Cosmetics - Microbiology - Detection of specified and non-specifiedmicroorganisms (ISO 18415:2017) CEN 7/9/2017

I.S. EN ISO 18422:2017Ships and marine technology - Inland navigation vessels - Plate with instructionsfor rescue, resuscitation and first aid for drowning persons (ISO 18422:2014) CEN 10/15/2017

I.S. EN ISO 18451-1:2017Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO18451-1:2015) CEN 10/1/2017

I.S. EN ISO 18451-2:2017Pigments, dyestuffs and extenders - Terminology - Part 2: Classification ofcolouring materials according to colouristic and chemical aspects (ISO18451-2:2015)

CEN 10/1/2017

I.S. EN ISO 18465:2017Microbiology of the food chain - Quantitative determination of emetic toxin(cereulide) using LC-MS/MS (ISO 18465:2017) CEN 2/27/2017

I.S. EN ISO 18563-2:2017Non-destructive testing - Characterization and verification of ultrasonic phasedarray equipment - Part 2: Probes (ISO 18563-2:2017) CEN 9/17/2017

I.S. EN ISO 18589-2:2017Measurement of radioactivity in the environment - Soil - Part 2: Guidance forthe selection of the sampling strategy, sampling and pre-treatment of samples(ISO 18589-2:2015)

CEN 10/29/2017

I.S. EN ISO 18589-3:2017Measurement of radioactivity in the environment - Soil - Part 3: Test method ofgamma-emitting radionuclides using gamma-ray spectrometry (ISO18589-3:2015, Corrected version 2015-12-01)

CEN 10/29/2017

I.S. EN ISO 18674-3:2017Geotechnical investigation and testing - Geotechnical monitoring by fieldinstrumentation - Part 3: Measurement of displacements across a line:Inclinometers (ISO 18674-3:2017)

CEN 12/24/2017

I.S. EN ISO 18753:2017Fine ceramics (advanced ceramics, advanced technical ceramics) -Determination of absolute density of ceramic powders by pycnometer (ISO18753:2017)

CEN 10/15/2017

I.S. EN ISO 18797-1:2017Petroleum, petrochemical and natural gas industries - External corrosionprotection of risers by coatings and linings - Part 1: Elastomeric coatingsystems-polychloroprene or EPDM (ISO 18797-1:2016)

CEN 10/9/2017

I.S. EN ISO 18830:2017Plastics - Determination of aerobic biodegradation of non-floating plasticmaterials in a seawater/sandy sediment interface - Method by measuring theoxygen demand in closed respirometer (ISO 18830:2016)

CEN 12/24/2017

I.S. EN ISO 19017:2017Guidance for gamma spectrometry measurement of radioactive waste (ISO19017:2015) CEN 10/29/2017

I.S. EN ISO 19020:2017Microbiology of the food chain - Horizontal method for the immunoenzymaticdetection of staphylococcal enterotoxins in foodstuffs (ISO 19020:2017) CEN 7/16/2017

I.S. EN ISO 19085-1:2017Woodworking machines - Safety - Part 1: Common requirements (ISO19085-1:2017) CEN 9/10/2017

I.S. EN ISO 19085-2:2017Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawingmachines (ISO 19085-2:2017, Corrected version 2017-11-01) CEN 9/10/2017

I.S. EN ISO 19085-3:2017Woodworking machines - Safety requirements - Part 3: Numerically controlled(NC) boring and routing machines (ISO 19085-3:2017) CEN 12/24/2017

I.S. EN ISO 19085-5:2017 Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017) CEN 9/10/2017

I.S. EN ISO 19085-6:2017Woodworking machines - Safety - Part 6: Single spindle vertical mouldingmachines ("toupies") (ISO 19085-6:2017) CEN 12/31/2017

I.S. EN ISO 19110:2016Geographic information - Methodology for feature cataloguing (ISO19110:2016) CEN 1/16/2017

I.S. EN ISO 19160-4:2017Addressing - Part 4: International postal address components and templatelanguage (ISO 19160-4:2017) CEN 12/31/2017

I.S. EN ISO 19238:2017Radiological protection - Performance criteria for service laboratories performingbiological dosimetry by cytogenetics (ISO 19238:2014) CEN 11/5/2017

I.S. EN ISO 19285:2017Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) -Acceptance levels (ISO 19285:2017) CEN 10/1/2017

I.S. EN ISO 19340:2017Water quality - Determination of dissolved perchlorate - Method using ionchromatography (IC) (ISO 19340:2017) CEN 12/24/2017

I.S. EN ISO 19343:2017Microbiology of the food chain - Detection and quantification of histamine in fishand fishery products - HPLC method (ISO 19343:2017) CEN 7/23/2017

I.S. EN ISO 19399:2017Paints and varnishes - Wedge-cut method for determination of film thickness(scribe and drill method) (ISO 19399:2016) CEN 12/24/2017

I.S. EN ISO 19490:2017 Dentistry - Sinus membrane elevator (ISO 19490:2017) CEN 7/9/2017

I.S. EN ISO 19496-1:2017Vitreous and porcelain enamels - Terminology - Part 1: Terms and definitions(ISO 19496-1:2017) CEN 4/16/2017

I.S. EN ISO 19496-2:2017Vitreous and porcelain enamels - Terminology - Part 2: Visual representationsand descriptions (ISO 19496-2:2017) CEN 4/16/2017

I.S. EN ISO 19679:2017Plastics - Determination of aerobic biodegradation of non-floating plasticmaterials in a seawater/sediment interface - Method by analysis of evolvedcarbon dioxide (ISO 19679:2016)

CEN 12/24/2017

I.S. EN ISO 19715:2017 Dentistry - Filling instrument with contra angle (ISO 19715:2017) CEN 6/11/2017

I.S. EN ISO 19743:2017Solid biofuels - Determination of content of heavy extraneous materials largerthan 3,15 mm (ISO 19743:2017) CEN 6/4/2017

I.S. EN ISO 19901-2:2017Petroleum and natural gas industries - Specific requirements for offshorestructures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2017) CEN 12/31/2017

I.S. EN ISO 19918:2017 Protective clothing - Protection against chemicals - Measurement of cumulativepermeation of chemicals with low vapour pressure through materials (ISO19918:2017)

CEN 12/10/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 19901-2:2017Petroleum and natural gas industries - Specific requirements for offshorestructures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2017) CEN 12/31/2017

I.S. EN ISO 19918:2017Protective clothing - Protection against chemicals - Measurement of cumulativepermeation of chemicals with low vapour pressure through materials (ISO19918:2017)

CEN 12/10/2017

I.S. EN ISO 20028-1:2017Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part1: Designation system and basis for specifications (ISO 20028-1:2017) CEN 4/16/2017

I.S. EN ISO 20028-2:2017Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part2: Preparation of test specimens and determination of properties (ISO20028-2:2017)

CEN 4/16/2017

I.S. EN ISO 20108:2017Simultaneous interpreting - Quality and transmission of sound and image input -Requirements (ISO 20108:2017) CEN 12/31/2017

I.S. EN ISO 20109:2016 Simultaneous interpreting - Equipment - Requirements (ISO 20109:2016) CEN 1/16/2017

I.S. EN ISO 20136:2017 Leather - Determination of degradability by micro-organisms (ISO 20136:2017) CEN 4/9/2017

I.S. EN ISO 20137:2017Leather - Chemical tests - Guidelines for testing critical chemicals in leather (ISO20137:2017) CEN 4/9/2017

I.S. EN ISO 20227:2017Water quality - Determination of the growth inhibition effects of waste waters,natural waters and chemicals on the duckweed Spirodela polyrhiza - Methodusing a stock culture independent microbiotest (ISO 20227:2017)

CEN 7/23/2017

I.S. EN ISO 20274:2017Vitreous and porcelain enamels - Preparation of samples and determination ofthermal expansion coefficient (ISO 20274:2017) CEN 9/17/2017

I.S. EN ISO 20339:2017Non-destructive testing - Equipment for eddy current examination - Array probecharacteristics and verification (ISO 20339:2017) CEN 5/14/2017

I.S. EN ISO 20349-1:2017Personal protective equipment - Footwear protecting against risks in foundriesand welding - Part 1: Requirements and test methods for protection againstrisks in foundries (ISO 20349-1:2017)

CEN 9/10/2017

I.S. EN ISO 20349-2:2017Personal protective equipment - Footwear protecting against risks in foundriesand welding - Part 2: Requirements and test methods for protection againstrisks in welding and allied processes (ISO 20349-2:2017)

CEN 9/24/2017

I.S. EN ISO 20380:2017Public swimming pools - Computer vision systems for the detection of drowningaccidents in swimming pools - Safety requirements and test methods (ISO20380:2017)

CEN 12/31/2017

I.S. EN ISO 20421-2:2017Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2:Operational requirements (ISO 20421-2:2017) CEN 3/24/2017

I.S. EN ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017) CEN 5/14/2017

I.S. EN ISO 20519:2017Ships and marine technology - Specification for bunkering of liquefied naturalgas fuelled vessels (ISO 20519:2017) CEN 3/24/2017

I.S. EN ISO 20536:2017Footwear - Critical substances potentially present in footwear and footwearcomponents - Determination of phenol in footwear materials (ISO 20536:2017) CEN 12/3/2017

I.S. EN ISO 20553:2017Radiation protection - Monitoring of workers occupationally exposed to a risk ofinternal contamination with radioactive material (ISO 20553:2006) CEN 10/29/2017

I.S. EN ISO 20567-1:2017Paints and varnishes - Determination of stone-chip resistance of coatings - Part1: Multi-impact testing (ISO 20567-1:2017) CEN 2/27/2017

I.S. EN ISO 20567-2:2017Paints and varnishes - Determination of stone-chip resistance of coatings - Part2: Single-impact test with a guided impact body (ISO 20567-2:2017) CEN 2/27/2017

I.S. EN ISO 20568-1:2017Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part1: Designation system and basis for specifications (ISO 20568-1:2017) CEN 6/25/2017

I.S. EN ISO 20568-2:2017Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part2: Preparation of test specimens and determination of properties (ISO20568-2:2017)

CEN 6/25/2017

I.S. EN ISO 20685-2:2017Ergonomics - 3-D scanning methodologies for internationally compatibleanthropometric databases - Part 2: Evaluation protocol of surface shape andrepeatability of relative landmark positions (ISO 20685-2:2015)

CEN 3/24/2017

I.S. EN ISO 20785-1:2017Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1:Conceptual basis for measurements (ISO 20785-1:2012) CEN 10/30/2017

I.S. EN ISO 20785-2:2017Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2:Characterization of instrument response (ISO 20785-2:2011) CEN 10/29/2017

I.S. EN ISO 20785-3:2017Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3:Measurements at aviation altitudes (ISO 20785-3:2015) CEN 10/29/2017

I.S. EN ISO 20957-5:2016Stationary training equipment - Part 5: Stationary exercise bicycles and upperbody crank training equipment, additional specific safety requirements and testmethods (ISO 20957-5:2016)

CEN 1/16/2017

I.S. EN ISO 20957-8:2017Stationary training equipment - Part 8: Steppers, stairclimbers and climbers -Additional specific safety requirements and test methods (ISO 20957-8:2017) CEN 12/24/2017

I.S. EN ISO 20957-10:2017Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel orwithout freewheel - Additional specific safety requirements and test methods(ISO 20957-10:2017)

CEN 12/24/2017

I.S. EN ISO 21148:2017Cosmetics - Microbiology - General instructions for microbiological examination(ISO 21148:2017) CEN 7/9/2017

I.S. EN ISO 21149:2017Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilicbacteria (ISO 21149:2017) CEN 7/9/2017

I.S. EN ISO 21294:2017 Oilseeds - Manual or automatic discontinuous sampling (ISO 21294:2017) CEN 10/15/2017

I.S. EN ISO 21298:2017Health informatics - Functional and structural roles (ISO 21298:2017, Correctedversion 2017-04) CEN 3/24/2017

I.S. EN ISO 21483:2017 Determination of solubility in nitric acid of plutonium in unirradiated mixed oxidefuel pellets (U, Pu) O2 (ISO 21483:2013)

CEN 10/30/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 21298:2017Health informatics - Functional and structural roles (ISO 21298:2017, Correctedversion 2017-04) CEN 3/24/2017

I.S. EN ISO 21483:2017Determination of solubility in nitric acid of plutonium in unirradiated mixed oxidefuel pellets (U, Pu) O2 (ISO 21483:2013) CEN 10/30/2017

I.S. EN ISO 21528-1:2017Microbiology of the food chain - Horizontal method for the detection andenumeration of Enterobacteriaceae - Part 1: Detection of Enterobacteriaceae(ISO 21528-1:2017)

CEN 7/23/2017

I.S. EN ISO 21528-2:2017Microbiology of the food chain - Horizontal method for the detection andenumeration of Enterobacteriaceae - Part 2: Colony-count technique (ISO21528-2:2017)

CEN 7/23/2017

I.S. EN ISO 21549-7:2016Health informatics - Patient healthcard data - Part 7: Medication data (ISO21549-7:2016) CEN 1/1/2017

I.S. EN ISO 21613:2017(U, Pu)O2 Powders and sintered pellets - Determination of chlorine and fluorine(ISO 21613:2015) CEN 11/5/2017

I.S. EN ISO 21809-5:2017Petroleum and natural gas industries - External coatings for buried orsubmerged pipelines used in pipeline transportation systems - Part 5: Externalconcrete coatings (ISO 21809-5:2017)

CEN 8/20/2017

I.S. EN ISO 21872-1:2017Microbiology of the food chain - Horizontal method for the determination ofVibrio spp. - Part 1: Detection of potentially enteropathogenic Vibrioparahaemolyticus, Vibrio cholerae and Vibrio vulnificus (ISO 21872-1:2017)

CEN 7/30/2017

I.S. EN ISO 21987:2017 Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2017) CEN 9/17/2017

I.S. EN ISO 22007-1:2017Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1:General principles (ISO 22007-1:2017) CEN 12/17/2017

I.S. EN ISO 22007-4:2017Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4:Laser flash method (ISO 22007-4:2017) CEN 8/20/2017

I.S. EN ISO 22112:2017 Dentistry - Artificial teeth for dental prostheses (ISO 22112:2017) CEN 9/17/2017

I.S. EN ISO 22476-10:2017Geotechnical investigation and testing - Field testing - Part 10: Weight soundingtest (ISO 22476-10:2017) CEN 12/10/2017

I.S. EN ISO 22476-11:2017/LC:2017Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometertest (ISO 22476-11:2017) CEN 6/4/2017

I.S. EN ISO 22825:2017Non-destructive testing of welds - Ultrasonic testing - Testing of welds inaustenitic steels and nickel-based alloys (ISO 22825:2017) CEN 11/29/2017

I.S. EN ISO 22829:2017Resistance welding equipment - Transformers - Integrated transformer-rectifierunits for welding guns operating at 1 000 Hz (ISO 22829:2017) CEN 11/13/2017

I.S. EN ISO 22964:2017Microbiology of the food chain - Horizontal method for the detection ofCronobacter spp. (ISO 22964:2017) CEN 5/14/2017

I.S. EN ISO 23279:2017Non-destructive testing of welds - Ultrasonic testing - Characterization ofdiscontinuities in welds (ISO 23279:2017) CEN 10/1/2017

I.S. EN ISO 23910:2017Leather - Physical and mechanical tests - Measurement of stitch tear resistance(ISO 23910:2017) CEN 3/24/2017

I.S. EN ISO 24803:2017Recreational diving services - Requirements for recreational diving providers(ISO 24803:2017) CEN 4/16/2017

I.S. EN ISO 24817:2017Petroleum, petrochemical and natural gas industries - Composite repairs forpipework - Qualification and design, installation, testing and inspection (ISO24817:2017, Corrected version 2018-01-01)

CEN 9/24/2017

I.S. EN ISO 25110:2017Electronic fee collection - Interface definition for on-board account usingintegrated circuit card (ICC) (ISO 25110:2017) CEN 12/24/2017

I.S. EN ISO 25137-1:2017Plastics - Sulfone polymer moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 25137-1:2009) CEN 1/30/2017

I.S. EN ISO 25137-2:2017Plastics - Sulfone polymer moulding and extrusion materials - Part 2:Preparation of test specimens and determination of properties (ISO25137-2:2009)

CEN 1/30/2017

I.S. EN ISO 25178-71:2017Geometrical product specifications (GPS) - Surface texture: Areal - Part 71:Software measurement standards (ISO 25178-1:2017) CEN 10/29/2017

I.S. EN ISO 25178-72:2017Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XMLfile format x3p (ISO 25178-72:2017) CEN 6/25/2017

I.S. EN ISO 25237:2017 Health informatics - Pseudonymization (ISO 25237:2017) CEN 2/12/2017

I.S. EN ISO 25539-1:2017Cardiovascular implants - Endovascular devices - Part 1: Endovascularprostheses (ISO 25539-1:2017) CEN 4/2/2017

I.S. EN ISO 25649-1:2017Floating leisure articles for use on and in the water - Part 1: Classification,materials, general requirements and test methods (ISO 25649-1:2017) CEN 10/29/2017

I.S. EN ISO 25649-2:2017Floating leisure articles for use on and in the water - Part 2: Consumerinformation (ISO 25649-2:2017) CEN 10/29/2017

I.S. EN ISO 25649-3:2017Floating leisure articles for use on and in the water - Part 3: Additional specificsafety requirements and test methods for Class A devices (ISO 25649-3:2017) CEN 10/29/2017

I.S. EN ISO 25649-4:2017Floating leisure articles for use on and in the water - Part 4: Additional specificsafety requirements and test methods for Class B devices (ISO 25649-4:2017) CEN 10/29/2017

I.S. EN ISO 25649-5:2017Floating leisure articles for use on and in the water - Part 5: Additional specificsafety requirements and test methods for Class C devices (ISO 25649-5:2017) CEN 10/29/2017

I.S. EN ISO 25649-6:2017Floating leisure articles for use on and in the water - Part 6: Additional specificsafety requirements and test methods for Class D devices (ISO 25649-6:2017) CEN 10/29/2017

I.S. EN ISO 25649-7:2017 Floating leisure articles for use on and in the water - Part 7: Additional specificsafety requirements and test methods for class E devices (ISO 25649-7:2017)

CEN 10/29/2017



Reference Title En Origin Body Publication D..I.S. EN ISO 25649-6:2017Floating leisure articles for use on and in the water - Part 6: Additional specificsafety requirements and test methods for Class D devices (ISO 25649-6:2017) CEN 10/29/2017

I.S. EN ISO 25649-7:2017Floating leisure articles for use on and in the water - Part 7: Additional specificsafety requirements and test methods for class E devices (ISO 25649-7:2017) CEN 10/29/2017

I.S. EN ISO 27065:2017Protective clothing - Performance requirements for protective clothing worn byoperators applying pesticides and for re-entry workers (ISO 27065:2017) CEN 12/10/2017

I.S. EN ISO 27500:2017The human-centred organization - Rationale and general principles (ISO27500:2016) CEN 5/21/2017

I.S. EN ISO 27830:2017Metallic and other inorganic coatings - Requirements for the designation ofmetallic and inorganic coatings (ISO 27830:2017) CEN 12/24/2017

I.S. EN ISO 28706-2:2017Vitreous and porcelain enamels - Determination of resistance to chemicalcorrosion - Part 2: Determination of resistance to chemical corrosion by boilingacids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2..

CEN 4/2/2017

I.S. EN ISO 28921-1:2017Industrial valves - Isolating valves for low-temperature applications - Part 1:Design, manufacturing and production testing (ISO 28921-1:2013) CEN 3/6/2017

I.S. EN ISO 28921-2:2017Industrial valves - Isolating valves for low-temperature applications - Part 2:Type testing (ISO 28921-2:2015) CEN 3/6/2017

I.S. EN ISO 28927-1:2009/A1:2017Hand-held portable power tools - Test methods for evaluation of vibrationemission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wirebrushes (ISO 28927-1:2009/Amd 1:2017)

CEN 5/28/2017

I.S. EN ISO 28927-2:2009/A1:2017Hand-held portable power tools - Test methods for evaluation of vibrationemission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1:Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)

CEN 8/27/2017

I.S. EN ISO 29481-1:2017Building information models - Information delivery manual - Part 1:Methodology and format (ISO 29481-1:2016) CEN 10/29/2017

I.S. EN ISO 29621:2017Cosmetics - Microbiology - Guidelines for the risk assessment and identificationof microbiologically low-risk products (ISO 29621:2017) CEN 4/16/2017

I.S. EN ISO 29661:2017Reference radiation fields for radiation protection - Definitions and fundamentalconcepts (ISO 29661:2012, including Amd 1:2015) CEN 11/5/2017

I.S. EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) CEN 3/6/2017

I.S. EN ISO 52000-1:2017Energy performance of buildings - Overarching EPB assessment - Part 1:General framework and procedures (ISO 52000-1:2017) CEN 8/13/2017

I.S. EN ISO 52003-1:2017Energy performance of buildings - Indicators, requirements, ratings andcertificates - Part 1: General aspects and application to the overall energyperformance (ISO 52003-1:2017)

CEN 8/6/2017

I.S. EN ISO 52010-1:2017Energy performance of buildings - External climatic conditions - Part 1:Conversion of climatic data for energy calculations (ISO 52010-1:2017) CEN 8/6/2017

I.S. EN ISO 52016-1:2017Energy performance of buildings - Energy needs for heating and cooling,internal temperatures and sensible and latent heat loads - Part 1: Calculationprocedures (ISO 52016-1:2017)

CEN 8/6/2017

I.S. EN ISO 52017-1:2017Energy performance of buildings - Sensible and latent heat loads and internaltemperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017) CEN 8/6/2017

I.S. EN ISO 52018-1:2017Energy performance of buildings - Indicators for partial EPB requirementsrelated to thermal energy balance and fabric features - Part 1: Overview ofoptions (ISO 52018-1:2017)

CEN 8/6/2017

I.S. EN ISO 52022-1:2017Energy performance of buildings - Thermal, solar and daylight properties ofbuilding components and elements - Part 1: Simplified calculation method of thesolar and daylight characteristics for solar protection devices combined with gl..

CEN 8/6/2017

I.S. EN ISO 52022-3:2017Energy performance of buildings - Thermal, solar and daylight properties ofbuilding components and elements - Part 3: Detailed calculation method of thesolar and daylight characteristics for solar protection devices combined with gl..

CEN 8/6/2017

I.S. EN ISO 80369-7:2017Small-bore connectors for liquids and gases in healthcare applications - Part 7:Connectors for intravascular or hypodermic applications (ISO 80369-7:2016,Corrected version 2016-12-01)

CEN 6/18/2017

I.S. EN ISO 80601-2-56:2017Medical electrical equipment - Part 2-56: Particular requirements for basic safetyand essential performance of clinical thermometers for body temperaturemeasurement (ISO 80601-2-56:2017)

CEN 8/13/2017

I.S. EN ISO/ASTM 52900:2017Additive manufacturing - General principles - Terminology (ISO/ASTM52900:2015) CEN 3/6/2017

I.S. EN ISO/ASTM 52915:2017Specification for additive manufacturing file format (AMF) Version 1.2(ISO/ASTM 52915:2016) CEN 3/6/2017

I.S. EN ISO/IEC 17011:2017Conformity assessment - Requirements for accreditation bodies accreditingconformity assessment bodies (ISO/IEC 17011:2017) CEN 12/31/2017

I.S. EN ISO/IEC 17025:2017General requirements for the competence of testing and calibration laboratories(ISO/IEC 17025:2017) CEN 12/31/2017

I.S. EN ISO/IEC 25063:2017Systems and software engineering - Systems and software product QualityRequirements and Evaluation (SQuaRE) - Common Industry Format (CIF) forusability: Context of use description (ISO/IEC 25063:2014)

CEN 6/18/2017

I.S. EN ISO/IEC 25064:2017Systems and software engineering - Software product Quality Requirements andEvaluation (SQuaRE) - Common Industry Format (CIF) for usability: User needsreport (ISO/IEC 25064:2013)

CEN 6/18/2017

I.S. EN ISO/IEC 27000:2017Information technology - Security techniques - Information securitymanagement systems - Overview and vocabulary (ISO/IEC 27000:2016) CEN 4/25/2017

I.S. EN ISO/IEC 27001:2017Information technology - Security techniques - Information securitymanagement systems - Requirements (ISO/IEC 27001:2013 including Cor1:2014 and Cor 2:2015)

CEN 4/25/2017

I.S. EN ISO/IEC 27002:2017Information technology - Security techniques - Code of practice for informationsecurity controls (ISO/IEC 27002:2013 including Cor 1:2014 and Cor 2:2015) CEN 4/25/2017

I.S. EN ISO/IEC 80079-20-2:2016/AC:2017Explosive atmospheres - Part 20-2: Material characteristics - Combustible duststest methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor1:2017)

CEN 10/29/2017

I.S. EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosiveatmospheres in underground mines (ISO/IEC 80079-38:2016)

CEN 1/16/2017



Reference Title En Origin Body Publication D..I.S. EN ISO/IEC 80079-20-2:2016/AC:2017

Explosive atmospheres - Part 20-2: Material characteristics - Combustible duststest methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor1:2017) CEN 10/29/2017

I.S. EN ISO/IEC 80079-38:2016Explosive atmospheres - Part 38: Equipment and components in explosiveatmospheres in underground mines (ISO/IEC 80079-38:2016) CEN 1/16/2017

I.S. HD 60364-4-41:2007Low-voltage electrical installations - Part 4-41: Protection for safety - Protectionagainst electric shock CENELEC 3/17/2017

I.S. HD 60364-6:2007 Low voltage electrical installations - Part 6: Verification CENELEC 3/17/2017

I.S. HD 60364-7-722:2016Low-voltage electrical installations - Part 7-722: Requirements for specialinstallations or locations - Supplies for electric vehicles CENELEC 12/14/2017

I.S. HD 60364-7-740:2006Electrical installations of buildings - Part 7-740: Requirements for specialinstallations or locations - Temporary electrical installations for structures,amusement devices and booths at fairgrounds, amusement parks and circuses

CENELEC 3/17/2017

S.R. CEN ISO/IEC TR 25060:2017Systems and software engineering - Systems and software product QualityRequirements and Evaluation (SQuaRE) - Common Industry Format (CIF) forusability: General framework for usability-related information (ISO/IEC TR 250..

CEN 4/30/2017

S.R. CEN ISO/TR 15608:2017Welding - Guidelines for a metallic materials grouping system (ISO/TR15608:2017) CEN 3/6/2017

S.R. CEN ISO/TR 17801:2017Plastics - Standard table for reference global solar spectral irradiance at sealevel - Horizontal, relative air mass 1 (ISO/TR 17801:2014) CEN 3/26/2017

S.R. CEN ISO/TR 18486:2017Plastics - Parameters comparing the spectral irradiance of a laboratory lightsource for weathering applications to a reference solar spectral irradiance(ISO/TR 18486:2016)

CEN 3/26/2017

S.R. CEN ISO/TR 20183:2017Sports and other recreational facilities and equipment - Injury and safetydefinitions and thresholds - Guidelines for their inclusion in standards (ISO/TR20183:2015)

CEN 9/17/2017

S.R. CEN ISO/TR 22100-1:2017Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100relates to type-B and type-C standards (ISO/TR 22100-1:2015) CEN 7/16/2017

S.R. CEN ISO/TR 52000-2:2017Energy performance of buildings - Overarching EPB assessment - Part 2:Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017) CEN 8/13/2017

S.R. CEN ISO/TR 52003-2:2017Energy performance of buildings - Indicators, requirements, ratings andcertificates - Part 2: Explanation and justification of ISO 52003-1 (ISO/TR52003-2:2017)

CEN 8/6/2017

S.R. CEN ISO/TR 52010-2:2017Energy performance of buildings - External climatic conditions - Part 2:Explanation and justification of ISO 52010-1 (ISO/TR 52010-2:2017) CEN 8/6/2017

S.R. CEN ISO/TR 52016-2:2017Energy performance of buildings - Energy needs for heating and cooling,internal temperatures and sensible and latent heat loads - Part 2: Explanationand justification of ISO 52016-1 and ISO 52017-1 (ISO/TR 52016-2:2017)

CEN 8/6/2017

S.R. CEN ISO/TR 52018-2:2017Energy performance of buildings - Indicators for partial EPB requirementsrelated to thermal energy balance and fabric features - Part 2: Explanation andjustification of ISO 52018-1 (ISO/TR 52018-2:2017)

CEN 8/6/2017

S.R. CEN ISO/TR 52019-2:2017Energy performance of buildings - Hygrothermal performance of buildingcomponents and building elements - Part 2: Explanation and justification(ISO/TR 52019-2:2017)

CEN 8/6/2017

S.R. CEN ISO/TR 52022-2:2017Energy performance of buildings - Thermal, solar and daylight properties ofbuilding components and elements - Part 2: Explanation and justification(ISO/TR 52022-2:2017)

CEN 8/6/2017

S.R. CEN ISO/TS 17429:2017Intelligent transport systems - Cooperative ITS - ITS station facilities for thetransfer of information between ITS stations (ISO/TS 17429:2017) CEN 5/14/2017

S.R. CEN ISO/TS 17444-1:2017Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS17444-1:2017) CEN 10/29/2017

S.R. CEN ISO/TS 17444-2:2017Electronic fee collection - Charging performance - Part 2: Examinationframework (ISO/TS 17444-2:2017) CEN 12/10/2017

S.R. CEN ISO/TS 17574:2017Electronic fee collection - Guidelines for security protection profiles (ISO/TS17574:2017) CEN 4/16/2017

S.R. CEN ISO/TS 17969:2017Petroleum, petrochemical and natural gas industries - Guidelines on competencymanagement for well operations personnel (ISO/TS 17969:2017) CEN 12/31/2017

S.R. CEN ISO/TS 19091:2017Intelligent transport systems - Cooperative ITS - Using V2I and I2Vcommunications for applications related to signalized intersections (ISO/TS19091:2017)

CEN 4/16/2017

S.R. CEN ISO/TS 19256:2017Health informatics - Requirements for medicinal product dictionary systems forhealth care (ISO/TS 19256:2016) CEN 4/9/2017

S.R. CEN ISO/TS 19844:2017Health informatics - Identification of medicinal products - Implementationguidelines for data elements and structures for the unique identification andexchange of regulated information on substances (ISO/TS 19844:2016)

CEN 9/17/2017

S.R. CEN ISO/TS 80004-2:2017 Nanotechnologies - Vocabulary - Part 2: Nano-objects (ISO/TS 80004-2:2015) CEN 7/23/2017

S.R. CEN ISO/TS 80004-12:2017Nanotechnologies - Vocabulary - Part 12: Quantum phenomena innanotechnology (ISO/TS 80004-12:2016) CEN 7/23/2017

S.R. CEN/TR 115-3:2017Safety of escalators and moving walks - Part 3: Correlation between EN115-1:2008+A1:2010 and EN 115-1:2017 CEN 12/10/2017

S.R. CEN/TR 12831-2:2017Energy performance of buildings - Method for calculation of the design heatload - Part 2: Explanation and justification of EN 12831-1, Module M3-3 CEN 4/23/2017

S.R. CEN/TR 12831-4:2017Energy performance of buildings - Method for calculation of the design heatload - Part 4: Explanation and justification of EN 12831-3, Module M8-2, M8-3 CEN 5/14/2017

S.R. CEN/TR 13121-5:2017GRP tanks and vessels for use above ground - Part 5: Example calculation of aGRP-vessel CEN 6/18/2017

S.R. CEN/TR 13480-7:2017Metallic industrial piping - Part 7: Guidance on the use of conformity assessmentprocedures CEN 8/13/2017

S.R. CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3: Designmethod

CEN 11/13/2017



Reference Title En Origin Body Publication D..S.R. CEN/TR 13480-7:2017Metallic industrial piping - Part 7: Guidance on the use of conformity assessmentprocedures CEN 8/13/2017

S.R. CEN/TR 14585-3:2017Corrugated metal hose assemblies for pressure applications - Part 3: Designmethod CEN 11/13/2017

S.R. CEN/TR 15193-2:2017Energy performance of buildings - Energy requirements for lighting - Part 2:Explanation and justification of EN 15193-1, Module M9 CEN 4/16/2017

S.R. CEN/TR 15316-6-1:2017Energy performance of buildings- Method for calculation of system energyrequirements and system efficiencies - Part 6-1: Explanation and justification ofEN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4

CEN 4/23/2017

S.R. CEN/TR 15316-6-2:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-2: Explanation and justification ofEN 15316-2, Module M3-5, M4-5

CEN 5/21/2017

S.R. CEN/TR 15316-6-3:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-3: Explanation and justification of15316-3, Module M3-6, M4-6, M8-6

CEN 5/7/2017

S.R. CEN/TR 15316-6-4:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-4: Explanation and justification ofEN 15316-4-1, Module M3-8-1, M8-8-1

CEN 4/30/2017

S.R. CEN/TR 15316-6-5:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-5: Explanation and justification ofEN 15316-4-2, Module M3-8

CEN 5/14/2017

S.R. CEN/TR 15316-6-6:2017Energy performance of buildings - Method for calculation of system energyperformance and system efficiencies - Part 6-6: Explanation and justification ofEN 15316-4-3, Module M3-8-3, M8-8-3

CEN 5/14/2017

S.R. CEN/TR 15316-6-7:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-7: Explanation and justification ofEN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4

CEN 4/23/2017

S.R. CEN/TR 15316-6-8:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-8: Explanation and justification ofEN 15316-4-5 (District heating and cooling), Module M3-8-5, M4-8-5, M8-8-5, ..

CEN 5/14/2017

S.R. CEN/TR 15316-6-9:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-9: Explanation and justification ofEN 15316-4-8, Module M3-8-8

CEN 5/21/2017

S.R. CEN/TR 15316-6-10:2017Energy performance of buildings - Method for calculation of system energyrequirements and system efficiencies - Part 6-10: Explanation and justificationof EN 15316-5, Module M3-7, M8-7

CEN 5/14/2017

S.R. CEN/TR 15371-1:2017Safety of toys - Interpretations - Part 1: Replies to requests for interpretation ofEN 71-1, EN 71-2, EN 71-8 and EN 71-14 CEN 6/11/2017

S.R. CEN/TR 15371-2:2017Safety of toys - Interpretations - Part 2: Replies to requests for interpretation ofthe chemical standards in the EN 71-series CEN 6/11/2017

S.R. CEN/TR 15378-2:2017Energy performance of buildings - Heating systems and DHW in buildings - Part2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11 CEN 4/23/2017

S.R. CEN/TR 15378-4:2017Energy performance of buildings - Heating systems and DHW in buildings - Part4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 CEN 5/21/2017

S.R. CEN/TR 15419:2017Protective clothing - Guidelines for selection, use, care and maintenance ofchemical protective clothing CEN 12/17/2017

S.R. CEN/TR 15459-2:2017Energy performance of buildings - Economic evaluation procedure for energysystems in buildings - Part 2: Explanation and justification of EN 15459-1,Module M1-14

CEN 5/14/2017

S.R. CEN/TR 16234-3:2017e-Competence Framework (e-CF) - A common European Framework for ICTProfessionals in all industry sectors - Part 3: Methodology CEN 4/2/2017

S.R. CEN/TR 16389:2017Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background tothe parameters required and their respective limits and determination CEN 7/23/2017

S.R. CEN/TR 16798-4:2017Energy performance of buildings - Ventilation for buildings - Part 4:Interpretation of the requirements in EN 16798- 3 - For non-residentialbuildings - Performance requirements for ventilation and room-conditioning sys..

CEN 6/25/2017

S.R. CEN/TR 16798-6:2017Energy performance of buildings - Ventilation for buildings - Part 6:Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2 -Calculation methods for energy requirements of ventilation and air conditionin..

CEN 7/9/2017

S.R. CEN/TR 16798-8:2017Energy performance of buildings - Ventilation for buildings - Part 8:Interpretation of the requirements in EN 16798-7 - Calculation methods for thedetermination of air flow rates in buildings including infiltration - (Module M5-5)

CEN 7/2/2017

S.R. CEN/TR 16798-10:2017Energy performance of buildings - Ventilation for buildings - Part 10:Interpretation of the requirements in EN 16798-9 - Calculation methods forenergy requirements of cooling systems (Module M4-1,M4-4, M4-9) - General

CEN 7/9/2017

S.R. CEN/TR 16798-14:2017Energy performance of buildings - Ventilation for buildings - Part 14:Interpretation of the requirements in EN 16798-13 - Calculation of coolingsystems (Module M4-8) - Generation

CEN 7/9/2017

S.R. CEN/TR 16798-16:2017Energy performance of buildings - Ventilation for buildings - Part 16:Interpretation of the requirements in EN 16798-15 - Calculation of coolingsystems (Module M4-7) - Storage

CEN 7/16/2017

S.R. CEN/TR 16798-18:2017Energy performance of buildings - Ventilation for buildings - Part 18:Interpretation of the requirements in EN 16798-17 - Guidelines for inspection ofventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)

CEN 7/9/2017

S.R. CEN/TR 16931-4:2017Electronic invoicing - Part 4: Guidelines on interoperability of electronic invoicesat the transmission level CEN 7/23/2017

S.R. CEN/TR 16931-5:2017Electronic invoicing - Part 5: Guidelines on the use of sector or countryextensions in conjunction with EN 16931-1, methodology to be applied in thereal environment

CEN 7/23/2017

S.R. CEN/TR 16931-6:2017Electronic invoicing - Part 6: Result of the test of EN 16931-1 with respect to itspractical application for an end user CEN 11/5/2017

S.R. CEN/TR 16953:2017 Medical gloves for single use - Guidance for selection CEN 12/3/2017

S.R. CEN/TR 16958:2017 Road marking materials - Conditions for removing/masking road markings CEN 12/24/2017

S.R. CEN/TR 17024:2017 Natural stones - Guidance for use of natural stones CEN 2/5/2017

S.R. CEN/TR 17039:2017 Railway applications - Technical Report about the revision of EN 14363 CEN 3/24/2017



Reference Title En Origin Body Publication D..S.R. CEN/TR 17024:2017 Natural stones - Guidance for use of natural stones CEN 2/5/2017

S.R. CEN/TR 17039:2017 Railway applications - Technical Report about the revision of EN 14363 CEN 3/24/2017

S.R. CEN/TR 17040:2017Fertilizers and liming materials - Sampling of static heaps - Technical report onexperimental sampling trials performed under mandate M/454 CEN 3/6/2017

S.R. CEN/TR 17052:2017Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steelstructures and aluminium structures - Part 1: Requirements for conformityassessment of structural components

CEN 1/30/2017

S.R. CEN/TR 17055:2017Workplace exposure - Measurement of chemical agents complying with therequirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN13890 and EN 13936 - Choice of procedures

CEN 3/6/2017

S.R. CEN/TR 17063:2017Foods of plant origin - Multimethod for the determination of pesticide residuesusing GC- or LC-based analysis following acetonitrile extraction/partitioning andcleanup by dispersive SPE - Validation data of the modular QuEChERS-method

CEN 4/2/2017

S.R. CEN/TR 17068:2017Sealants for non-structural use in joints in buildings and pedestrian walkways -Guidance for CE marking and Declaration of Performance (DoP) CEN 3/6/2017

S.R. CEN/TR 17078:2017 Stationary source emissions - Guidance on the application of EN ISO 16911-1 CEN 4/9/2017

S.R. CEN/TR 17103:2017Fast pyrolysis bio-oil for stationary internal combustion engines - Qualitydetermination CEN 6/11/2017

S.R. CEN/TR 17105:2017Construction products - Assessment of release of dangerous substances -Guidance on the use of ecotoxicity tests applied to construction products CEN 7/2/2017

S.R. CEN/TR 17108:2017Non-destructive testing - Lighting in penetrant and magnetic particle testing,good practice CEN 7/9/2017

S.R. CEN/TR 17112:2017Cycles - Composite material used in bicycles - Specific tests suitable forcomponents manufactured from composite materials CEN 7/30/2017

S.R. CEN/TR 17113:2017Construction products - Assessment of release of dangerous substances -Radiation from construction products - Dose assessment of emitted gammaradiation

CEN 11/5/2017

S.R. CEN/TR 17143:2017Intelligent transport systems - Standards and actions necessary to enable urbaninfrastructure coordination to support Urban-ITS CEN 10/23/2017

S.R. CEN/TR 17144:2017Resistance of metallic materials to liquid biogenic and alternative fuels and theirblends CEN 10/1/2017

S.R. CEN/TR 419010:2017Framework for standardization of signatures - Extended structure includingelectronic identification and authentication CEN 6/18/2017

S.R. CEN/TR 419200:2017 Guidance for signature creation and other related devices CEN 6/18/2017

S.R. CEN/TS 1453-2:2017Plastics piping systems with structured wall pipes for soil and waste discharge(low and high temperature) inside buildings - Unplasticized poly(vinyl chloride)(PVC-U) - Part 2: Guidance for the assessment of conformity

CEN 4/9/2017

S.R. CEN/TS 12200-2:2017Plastics rainwater piping systems for above ground external use - Unplasticizedpoly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformityCEN 2/27/2017

S.R. CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test CEN 8/20/2017

S.R. CEN/TS 15223:2017Plastics piping systems - Validated design parameters of buried thermoplasticspiping systems CEN 11/29/2017

S.R. CEN/TS 16405:2017Intelligent transport systems - Ecall - Additional data concept specification forheavy goods vehicles CEN 2/12/2017

S.R. CEN/TS 16794-1:2017Public transport - Communication between contactless readers and fare media -Part 1: Implementation requirements for ISO/IEC 14443 CEN 8/6/2017

S.R. CEN/TS 16794-2:2017Public transport - Communication between contactless readers and fare media -Part 2: Test plan for ISO/IEC 14443 CEN 7/30/2017

S.R. CEN/TS 16931-2:2017 Electronic invoicing - Part 2: List of syntaxes that comply with EN 16931-1 CEN 7/16/2017

S.R. CEN/TS 16931-3-1:2017Electronic invoicing - Part 3-1: Methodology for syntax bindings of the coreelements of an electronic invoice CEN 7/23/2017

S.R. CEN/TS 16931-3-2:2017Electronic invoicing - Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1)invoice and credit note CEN 11/5/2017

S.R. CEN/TS 16931-3-3:2017Electronic invoicing - Part 3-3: Syntax binding for UN/CEFACT XML IndustryInvoice D16B CEN 11/5/2017

S.R. CEN/TS 16931-3-4:2017 Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B CEN 11/5/2017

S.R. CEN/TS 16986:2016/AC:2017Electronic Fee Collection - Interoperable application profiles for informationexchange between Service Provision and Toll Charging CEN 4/30/2017

S.R. CEN/TS 17006:2016 Earthworks - Continuous Compaction Control (CCC) CEN 1/16/2017

S.R. CEN/TS 17035:2017 Surface Active Agents - Bio-based surfactants - Requirements and test methods CEN 3/24/2017

S.R. CEN/TS 17045:2017Materials obtained from end of life tyres - Quality criteria for the selection ofwhole tyres, for recovery and recycling processes CEN 4/2/2017

S.R. CEN/TS 17051:2017 Full body photography CEN 5/28/2017

S.R. CEN/TS 17060:2017 Fertilizers - Determination of molybdenum in concentrations > 10 % using agravimetric method with 8-hydroxyquinoline

CEN 6/11/2017



Reference Title En Origin Body Publication D..S.R. CEN/TS 17051:2017 Full body photography CEN 5/28/2017

S.R. CEN/TS 17060:2017Fertilizers - Determination of molybdenum in concentrations > 10 % using agravimetric method with 8-hydroxyquinoline CEN 6/11/2017

S.R. CEN/TS 17061:2017Foodstuffs - Guidelines for the calibration and quantitative determination ofpesticide residues and organic contaminants using chromatographic methods CEN 10/15/2017

S.R. CEN/TS 17062:2017Foods of plant origin - Multimethod for the determination of pesticide residuesin vegetable oils by LC-MS/MS CEN 10/15/2017

S.R. CEN/TS 17073:2017 Postal services - Interfaces for cross border parcels CEN 7/9/2017

S.R. CEN/TS 17100:2017Non-destructive testing - Penetrant testing - Reference photographs and sizingof indications CEN 9/24/2017

S.R. CEN/TS 17118:2017Intelligent transport systems - Public transport - Open API for distributedjourney planning CEN 11/29/2017

S.R. CLC/TR 50542-2:2016Railway applications - Driver's cab Train Display Controller (TDC) - Part 2:Display systems FIS CENELEC 1/23/2017

S.R. CLC/TR 50542-3:2016Railway applications - Driver's cab train Display Controller (TDC) - Part 3: Othertrain systems FIS CENELEC 1/23/2017

S.R. CLC/TR 50600-99-1:2017Information technology - Data centre facilities and infrastructures - Part 99-1:Recommended practices for energy management CENELEC 5/2/2017

S.R. CLC/TR 50659:2017 Electromagnetic characteristics of linear cable management systems (CMS) CENELEC 4/4/2017

S.R. CLC/TS 50131-2-11:2017Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors- ALDDR CENELEC 2/14/2017

S.R. CLC/TS 50136-7:2017Alarm systems - Alarm transmission systems and equipment - Part 7:Application guidelines CENELEC 10/10/2017

S.R. CLC/TS 50136-9:2017Alarm systems - Alarm transmission systems and equipment - Part 9:Requirements for common protocol for alarm transmission using the InternetProtocol (IP)

CENELEC 8/22/2017

S.R. CLC/TS 50576:2016 Electric cables - Extended application of test results for reaction to fire CENELEC 1/16/2017

S.R. CLC/TS 50625-3-3:2017Collection, logistics & treatment requirements for WEEE - Part 3-3: Specificationfor de-pollution - WEEE containing CRTs and flat panel displays CENELEC 8/22/2017

S.R. CLC/TS 50625-3-4:2017Collection, logistics & treatment requirements for WEEE - Part 3-4: Specificationfor de-pollution - temperature exchange equipment CENELEC 8/15/2017

S.R. CLC/TS 50625-3-5:2017Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technicalspecification for de-pollution - Photovoltaic panels CENELEC 12/5/2017

S.R. CLC/TS 50625-4:2017Collection, logistics & treatment requirements for WEEE - Part 4: Specificationfor the collection and logistics associated with WEEE CENELEC 6/27/2017

S.R. CLC/TS 50625-5:2017Collection, logistics & Treatment requirements for WEEE - Part 5: Specificationfor the final treatment of WEEE fractions - Copper and precious metals CENELEC 8/22/2017

S.R. CLC/TS 50661-1:2017Alarm systems - External perimeter security systems - Part 1: Systemrequirements CENELEC 9/26/2017

S.R. CLC/TS 61400-14:2017Wind turbines - Part 14: Declaration of apparent sound power level and tonalityvalues CENELEC 9/19/2017

S.R. CLC/TS 61400-26-1:2017Wind turbines - Part 26-1: Time-based availability for wind turbine generatingsystems CENELEC 9/19/2017

S.R. CLC/TS 61400-26-2:2017 Wind turbines - Part 26-2: Production-based availability for wind turbines CENELEC 9/19/2017

S.R. CLC/TS 61400-26-3:2017 Wind energy generation systems - Part 26-3: Availability for wind power stationsCENELEC 9/19/2017

S.R. CWA 17094-1:2016Police firearms technology - Part 1: Police pistol and rifle ammunition features -Recommendations CEN 1/16/2017

S.R. CWA 17094-2:2016Police firearms technology - Part 2: Police pistol and support weapon -Recommendations CEN 1/16/2017

S.R. CWA 17094-3:2016Police firearms technology - Part 3: Police shotgun ammunition features -Recommendations CEN 1/16/2017

S.R. CWA 17102:2017Water analysis - Virus sensor system - Monitoring rotavirus, norovirus andhepatitis A virus in various types of water intended for human use CEN 1/30/2017

S.R. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee CEN 5/28/2017

S.R. CWA 17145-2:2017Ethics assessment for research and innovation - Part 2: Ethical impactassessment framework CEN 7/16/2017

S.R. CWA 17147:2017Guidelines for the evaluation of installed security systems, based on the STEFidimensions CEN 5/28/2017

S.R. CWA 17157:2017Engineering materials - Electronic data interchange - Formats for fatigue testdata CEN 10/29/2017

S.R. CWA 17185:2017Methodology to measure and improve the resource efficiency of resourceintensive processes CEN 9/17/2017

S.R. EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols -Determination of number concentration using condensation particle counters

CEN 7/16/2017



Reference Title En Origin Body Publication D..S.R. CWA 17185:2017Methodology to measure and improve the resource efficiency of resourceintensive processes CEN 9/17/2017

S.R. EN 16897:2017Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols -Determination of number concentration using condensation particle counters CEN 7/16/2017

S.R. EN 140401-803:2007/A3:2017Detail specification: Fixed low power film SMD resistors - Cylindrical - Stabilityclasses 0,05; 0,1; 0,25; 0,5; 1; 2 CENELEC 4/4/2017

S.R. HD 60269-3:2010/A1:2013Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 5/6/2017

S.R. HD 60364-1:2008Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 5/6/2017

S.R. HD 60364-1:2008/A11:2017Low-voltage electrical installations - Part 1: Fundamental principles, assessmentof general characteristics, definitions CENELEC 8/29/2017

S.R. HD 60364-4-41:2007/A11:2017Low-voltage electrical installations - Part 4-41: Protection for safety - Protectionagainst electric shock CENELEC 8/29/2017

S.R. HD 60364-4-41:2017Low-voltage electrical installations - Part 4-41: Protection for safety - Protectionagainst electric shock CENELEC 7/25/2017

S.R. HD 60364-4-41:2017/A11:2017Low-voltage electrical installations - Part 4-41: Protection for safety - Protectionagainst electric shock CENELEC 8/29/2017

S.R. HD 60364-4-43:2010Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 5/6/2017

S.R. HD 60364-4-46:2016/A11:2017Low-voltage electrical installations - Part 4-46: Protection for safety - Isolationand switching CENELEC 8/29/2017


S.R. HD 60364-4-443:2016Low-voltage electrical installations - Part 4-44: Protection for safety - Protectionagainst voltage disturbances and electromagnetic disturbances - Clause 443:Protection against transient overvoltages of atmospheric origin or due to switc..

CENELEC 4/7/2017


S.R. HD 60364-5-51:2009/A12:2017Electrical installations of buildings - Part 5-51: Selection and erection ofelectrical equipment - Common rules CENELEC 8/29/2017


S.R. HD 60364-5-52:2011/A11:2017Low-voltage electrical installations - Part 5-52: Selection and erection ofelectrical equipment - Wiring systems CENELEC 12/19/2017

S.R. HD 60364-5-53:2015Low-voltage electrical installations - Part 5-53: Selection and erection ofelectrical equipment - Switchgear and controlgear CENELEC 8/29/2017

S.R. HD 60364-5-53:2015/A11:2017Low-voltage electrical installations - Part 5-53: Selection and erection ofelectrical equipment - Switchgear and controlgear CENELEC 8/29/2017

S.R. HD 60364-5-54:2011/A11:2017Low-voltage electrical installations - Part 5-54: Selection and erection ofelectrical equipment - Earthing arrangements and protective conductors CENELEC 8/29/2017

S.R. HD 60364-5-56:2010/A12:2017Low-voltage electrical installations - Part 5-56: Selection and erection ofelectrical equipment - Safety services CENELEC 8/29/2017

S.R. HD 60364-5-537:2016/A11:2017Low-voltage electrical installations - Part 5-53: Selection and erection ofelectrical equipment - Devices for protection, isolation, switching, control andmonitoring - Clause 537: Isolation and switching

CENELEC 8/29/2017

S.R. HD 60364-5-559:2012/A11:2017Low-voltage electrical installations - Part 5-559: Selection and erection ofelectrical equipment - Luminaires and lighting installations CENELEC 8/29/2017

S.R. HD 60364-6:2016 Low-voltage electrical installations - Part 6: Verification CENELEC 4/4/2017

S.R. HD 60364-6:2016/A11:2017 Low-voltage electrical installations - Part 6: Verification CENELEC 4/4/2017

S.R. HD 60364-6:2016/A12:2017 Low-voltage electrical installations - Part 6: Verification CENELEC 8/29/2017

S.R. HD 60364-6:2016/AC:2017-11 Low-voltage electrical installations - Part 6: Verification CENELEC 12/12/2017

S.R. HD 60364-7-701:2007/A12:2017Low-voltage electrical installations - Part 7-701: Requirements for specialinstallations or locations - Locations containing a bath or shower CENELEC 8/29/2017

S.R. HD 60364-7-704:2007/A11:2017Low-voltage electrical installations - Part 7-704: Requirements for specialinstallations or locations - Construction and demolition site installations CENELEC 8/29/2017

S.R. HD 60364-7-705:2007/A12:2017Low-voltage electrical installations - Part 7-705: Requirements for specialinstallations or locations - Agricultural and horticultural premises CENELEC 8/29/2017

S.R. HD 60364-7-708:2009/A11:2017Low-voltage electrical installations - Part 7-708: Requirements for specialinstallations or locations - Caravan parks, camping parks and similar locations CENELEC 9/5/2017

S.R. HD 60364-7-708:2009&A11:2017Low-voltage electrical installations - Part 7-708: Requirements for specialinstallations or locations - Caravan parks, camping parks and similar locations CENELEC 8/29/2017

S.R. HD 60364-7-709:2009/A11:2017Low-voltage electrical installations - Part 7-709: Requirements for specialinstallations or locations - Marinas and similar locations CENELEC 8/29/2017

S.R. HD 60364-7-715:2012/A11:2017Low-voltage electrical installations - Part 7-715: Requirements for specialinstallations or locations - Extra-low-voltage lighting installations CENELEC 8/29/2017

S.R. HD 60364-7-718:2013/A11:2017 Low-voltage electrical installations - Part 7-718: Requirements for specialinstallations or locations - Communal facilities and workplaces

CENELEC 5/23/2017



Reference Title En Origin Body Publication D..S.R. HD 60364-7-715:2012/A11:2017Low-voltage electrical installations - Part 7-715: Requirements for specialinstallations or locations - Extra-low-voltage lighting installations CENELEC 8/29/2017

S.R. HD 60364-7-718:2013/A11:2017Low-voltage electrical installations - Part 7-718: Requirements for specialinstallations or locations - Communal facilities and workplaces CENELEC 5/23/2017

S.R. HD 60364-7-718:2013/A12:2017Low-voltage electrical installations - Part 7-718: Requirements for specialinstallations or locations - Communal facilities and workplaces CENELEC 8/29/2017

S.R. HD 60364-7-729:2009/A11:2017Low-voltage electrical installations - Part 7-729: Requirements for specialinstallations or locations - Operating or maintenance gangways CENELEC 8/29/2017

S.R. HD 60364-7-740:2006/A11:2017Electrical installations of buildings - Part 7-740: Requirements for specialinstallations or locations - Temporary electrical installations for structures,amusement devices and booths at fairgrounds, amusement parks and circuses

CENELEC 8/29/2017



Documents

NSAI - Standards Publications NSAI WEB Report Date of ... · I.S. EN 1069-2:2017 Water slides - Part 2: Instructions CEN 8/27/2017 I.S. EN 1090-5:2017 Execution of steel structures