NSAI - Standards Publications NSAI WEB Report Date of ...€¦ · Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings

Reference Title En Origin Body Publication D..

I.S. 226:(EN 23-1:1978):1986Packages for washing and cleaning powders - Dimensions and volumes ofcartons and drums from fibre board CEN 4/29/1986

I.S. EN 33:2019 WC pans and WC suites - Connecting dimensions CEN 5/19/2019

I.S. EN 54-3:2014+A1:2019 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders CEN 4/14/2019

I.S. EN 54-13:2017+A1:2019Fire detection and fire alarm systems - Part 13: Compatibility and connectabilityassessment of system components CEN 1/6/2020

I.S. EN 71-3:2019 Safety of toys - Part 3: Migration of certain elements CEN 4/28/2019

I.S. EN 76:1986Packages for certain prepacked foodstuffs - Capacities of glass and metalcontainers CEN 5/12/1987

I.S. EN 81-28:2018+AC:2019Safety rules for the construction and installation of lifts - Lifts for the transportof persons and goods - Part 28: Remote alarm on passenger and goodspassenger lifts

CEN 2/10/2019

I.S. EN 81-71:2018+AC:2019Safety rules for the construction and installation of lifts - Particular applicationsto passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts CEN 2/10/2019

I.S. EN 81-80:2019Safety rules for the construction and installation of lifts - Existing lifts - Part 80:Rules for the improvement of safety of existing passenger and goods passengerlifts

CEN 9/8/2019

I.S. EN 131-1:2015+A1:2019 Ladders - Part 1: Terms, types, functional sizes CEN 9/29/2019

I.S. EN 131-6:2019 Ladders - Part 6: Telescopic ladders CEN 3/17/2019

I.S. EN 149:2001+A1:2009Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 7/13/2009

I.S. EN 212:2003Wood preservatives - General guidance on sampling and preparation foranalysis of wood preservatives and treated timber CEN 9/12/2003

I.S. EN 215:2019 Thermostatic radiator valves - Requirements and test methods CEN 10/7/2019

I.S. EN 234:2019Wallcoverings in roll form - Specification for wallcoverings for subsequentdecoration CEN 1/6/2020

I.S. EN 253:2019District heating pipes - Bonded single pipe systems for directly buried hot waternetworks - Factory made pipe assembly of steel service pipe, polyurethanethermal insulation and a casing of polyethylene

CEN 11/3/2019

I.S. EN 303-6:2019Heating boilers - Part 6: Heating boilers with forced draught burners - Specificrequirements for the domestic hot water operation and energy performance ofwater heaters and combination boilers with atomizing oil burners of nominal h..

CEN 8/25/2019

I.S. EN 334:2019 Gas pressure regulators for inlet pressure up to 10 MPa (100 bar) CEN 9/8/2019

I.S. EN 343:2019 Protective clothing - Protection against rain CEN 4/7/2019

I.S. EN 378-4:2016+A1:2019Refrigerating systems and heat pumps - Safety and environmental requirements- Part 4: Operation, maintenance, repair and recovery CEN 10/14/2019

I.S. EN 416:2019Gas-fired overhead radiant tube heaters and radiant tube heater systems fornon-domestic use - Safety and energy efficiency CEN 10/27/2019

I.S. EN 419:2019Gas-fired overhead luminous radiant heaters for non-domestic use - Safety andenergy efficiency CEN 11/3/2019

I.S. EN 438-2:2016/A1:2018High-pressure decorative laminates (HPL) - Sheets based on thermosettingresins (usually called laminates) - Part 2: Determination of properties CEN 1/15/2019

I.S. EN 448:2019District heating pipes - Bonded single pipe systems for directly buried hot waternetworks - Factory made fitting assemblies of steel service pipes, polyurethanethermal insulation and a casing of polyethylene

CEN 11/3/2019

I.S. EN 452:1995 Swap bodies - Swap bodies of Class A - Dimensions and general requirements CEN 1/23/1996

I.S. EN 474-1:2006+A6:2019 Earth-moving machinery - Safety - Part 1: General requirements CEN 10/27/2019

I.S. EN 484:2019Specification for dedicated liquefied petroleum gas appliances - Independentstoves, including those incorporating a grill for outdoor use CEN 4/21/2019

I.S. EN 488:2019District heating pipes - Bonded single pipe systems for directly buried hot waternetworks - Factory made steel valve assembly for steel service pipes,polyurethane thermal insulation and a casing of polyethylene

CEN 11/3/2019

I.S. EN 489-1:2019District heating pipes - Bonded single and twin pipe systems for buried hotwater networks - Part 1: Joint casing assemblies and thermal insulation for hotwater networks in accordance with EN 13941-1

CEN 11/3/2019

I.S. EN 507:2019Roofing and cladding products from metal sheet - Specification for fullysupported products of aluminium sheet CEN 9/1/2019

I.S. EN 508-2:2019Roofing and cladding products from metal sheet - Specification forself-supporting products of steel, aluminium or stainless steel sheet - Part 2:Aluminium

CEN 9/1/2019

I.S. EN 510:2019Specification for protective clothing for use where there is a risk ofentanglement with moving parts CEN 11/27/2019

I.S. EN 521:2019Specifications for dedicated liquefied petroleum gas appliances - Portablevapour pressure liquefied petroleum gas appliances CEN 4/21/2019

I.S. EN 521:2019+AC:2019 Specifications for dedicated liquefied petroleum gas appliances - Portablevapour pressure liquefied petroleum gas appliances

CEN 8/25/2019

NSAI - Standards Publications NSAI WEB Report Date of Publication 2019-12-30, 2019-12-25, 2019-12-24 and 85 more

Number of Records found :1,893

Reference Title En Origin Body Publication D..I.S. EN 521:2019Specifications for dedicated liquefied petroleum gas appliances - Portablevapour pressure liquefied petroleum gas appliances CEN 4/21/2019

I.S. EN 521:2019+AC:2019Specifications for dedicated liquefied petroleum gas appliances - Portablevapour pressure liquefied petroleum gas appliances CEN 8/25/2019

I.S. EN 527-2:2016+A1:2019Office furniture - Work tables - Part 2: Safety, strength and durabilityrequirements CEN 5/19/2019

I.S. EN 549:2019Rubber materials for seals and diaphragms for gas appliances and gasequipment CEN 7/21/2019

I.S. EN 573-3:2019Aluminium and aluminium alloys - Chemical composition and form of wroughtproducts - Part 3: Chemical composition and form of products CEN 9/15/2019

I.S. EN 590:2013+A1:2017 Automotive fuels - Diesel - Requirements and test methods CEN 8/16/2017

I.S. EN 622-4:2019 Fibreboards - Specifications - Part 4: Requirements for softboards CEN 6/30/2019

I.S. EN 686:2019Resilient floor coverings - Specification for plain and decorative linoleum on afoam backing CEN 7/7/2019

I.S. EN 687:2019Resilient floor coverings - Specification for plain and decorative linoleum on acorkment backing CEN 6/16/2019

I.S. EN 689:2018+AC:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 5/1/2019

I.S. EN 716-1:2017+AC:2019Furniture - Children's cots and folding cots for domestic use - Part 1: Safetyrequirements CEN 3/24/2019

I.S. EN 721:2019 Leisure accommodation vehicles - Safety ventilation requirements CEN 11/22/2019

I.S. EN 788:1994 Sacks for the transport of food aid - Tubular sacks made of composite film CEN 1/27/1995

I.S. EN 844:2019 Round and sawn timber - Terminology CEN 9/15/2019

I.S. EN 856:2015+AC:2019Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforcedhydraulic type - Specification CEN 3/24/2019

I.S. EN 893:2019 Mountaineering equipment - Crampons - Safety requirements and test methods CEN 8/25/2019

I.S. EN 927-3:2019Paints and varnishes - Coating materials and coating systems for exterior wood- Part 3: Natural weathering test CEN 10/7/2019

I.S. EN 927-10:2019Paints and varnishes - Coating materials and coating systems for exterior wood- Part 10: Resistance to blocking of paints and varnishes on wood CEN 5/19/2019

I.S. EN 927-13:2019Paints and varnishes - Coating materials and coating systems for exterior wood- Part 13: Assessment of resistance to impact of a coating on a woodensubstrate

CEN 10/7/2019

I.S. EN 934-6:2019Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment andverification of the constancy of performance CEN 3/24/2019

I.S. EN 943-1:2015+A1:2019Protective clothing against dangerous solid, liquid and gaseous chemicals,including liquid and solid aerosols - Part 1: Performance requirements for Type1 (gas-tight) chemical protective suits

CEN 4/14/2019

I.S. EN 943-2:2019Protective clothing against dangerous solid, liquid and gaseous chemicals,including liquid and solid aerosols - Part 2: Performance requirements for Type1 (gas-tight) chemical protective suits for emergency teams (ET)

CEN 4/14/2019

I.S. EN 1015-11:2019Methods of test for mortar for masonry - Part 11: Determination of flexural andcompressive strength of hardened mortar CEN 12/1/2019

I.S. EN 1047-1:2019Secure storage units - Classification and methods of test for resistance to fire -Part 1: Data cabinets and data inserts CEN 9/8/2019

I.S. EN 1047-2:2019Secure storage units - Classification and methods of test for resistance to fire -Part 2: Data rooms and data container CEN 4/21/2019

I.S. EN 1069-1:2017+A1:2019 Water slides - Part 1: Safety requirements and test methods CEN 6/30/2019

I.S. EN 1081:2018Resilient, laminate and modular multilayer floor coverings - Determination of theelectrical resistance CEN 1/15/2019

I.S. EN 1090-3:2019Execution of steel structures and aluminium structures - Part 3: Technicalrequirements for aluminium structures CEN 4/28/2019

I.S. EN 1114-3:2019Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safetyrequirements for haul-offs CEN 9/22/2019

I.S. EN 1127-1:2019Explosive atmospheres - Explosion prevention and protection - Part 1: Basicconcepts and methodology CEN 9/1/2019

I.S. EN 1130:2019 Children's furniture - Cribs - Safety requirements and test methods CEN 12/16/2019

I.S. EN 1143-1:2019Secure storage units - Requirements, classification and methods of test forresistance to burglary - Part 1: Safes, ATM safes, strongroom doors andstrongrooms

CEN 5/5/2019

I.S. EN 1176-2:2017+AC:2019Playground equipment and surfacing - Part 2: Additional specific safetyrequirements and test methods for swings CEN 11/10/2019

I.S. EN 1176-4:2017+AC:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 1/27/2019

I.S. EN 1176-5:2019 Playground equipment and surfacing - Part 5: Additional specific safetyrequirements and test methods for carousels

CEN 10/21/2019



Reference Title En Origin Body Publication D..I.S. EN 1176-4:2017+AC:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 1/27/2019

I.S. EN 1176-5:2019Playground equipment and surfacing - Part 5: Additional specific safetyrequirements and test methods for carousels CEN 10/21/2019



I.S. EN 1269:2019Textile floor coverings - Assessment of impregnations in needled floor coveringsby means of a soiling test CEN 12/1/2019

I.S. EN 1276:2019Chemical disinfectants and antiseptics - Quantitative suspension test for theevaluation of bactericidal activity of chemical disinfectants and antiseptics usedin food, industrial, domestic and institutional areas - Test method and require..

CEN 9/1/2019

I.S. EN 1295-1:2019Structural design of buried pipelines under various conditions of loading - Part1: General requirements CEN 4/21/2019

I.S. EN 1330-1:2014 Non destructive testing - Terminology - Part 1: List of general terms CEN 1/19/2015

I.S. EN 1366-12:2014+A1:2019Fire resistance tests for service installations - Part 12: Non-mechanical firebarrier for ventilation ductwork CEN 11/24/2019

I.S. EN 1366-13:2019 Fire resistance tests for service installations - Part 13: Chimneys CEN 5/12/2019

I.S. EN 1400:2013+A2:2018Child use and care articles - Soothers for babies and young children - Safetyrequirements and test methods CEN 9/23/2018

I.S. EN 1401-1:2019Plastics piping systems for non-pressure underground drainage and sewerage -Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes,fittings and the system

CEN 7/28/2019

I.S. EN 1434-5:2015+A1:2019 Thermal energy meters - Part 5: Initial verification tests CEN 3/3/2019

I.S. EN 1434-6:2015+A1:2019Thermal energy meters - Part 6: Installation, commissioning, operationalmonitoring and maintenance CEN 3/3/2019

I.S. EN 1443:2019 Chimneys - General requirements CEN 5/5/2019

I.S. EN 1519-1:2019Plastics piping systems for soil and waste discharge (low and high temperature)within the building structure - Polyethylene (PE) - Part 1: Requirements forpipes, fittings and the system

CEN 5/12/2019

I.S. EN 1527:2019Building hardware - Hardware for sliding doors and folding doors -Requirements and test methods CEN 9/8/2019

I.S. EN 1545-2:2015Identification card systems - Surface transport applications - Part 2: Transportand travel payment related data elements and code lists CEN 4/18/2015

I.S. EN 1562:2019 Founding - Malleable cast irons CEN 4/7/2019

I.S. EN 1612:2019Plastics and rubber machines - Reaction moulding machines and plants - Safetyrequirements CEN 11/3/2019

I.S. EN 1650:2019Chemical disinfectants and antiseptics - Quantitative suspension test for theevaluation of fungicidal or yeasticidal activity of chemical disinfectants andantiseptics used in food, industrial, domestic and institutional areas - Test met..

CEN 9/10/2019

I.S. EN 1656:2019Chemical disinfectants and antiseptics - Quantitative suspension test for theevaluation of bactericidal activity of chemical disinfectants and antiseptics usedin the veterinary area - Test method and requirements (phase 2, step 1)

CEN 10/7/2019

I.S. EN 1709:2019Safety requirements for cableway installations designed to transport persons -Precommissioning inspection and instructions for maintenance and operationalinspection and checks

CEN 5/19/2019

I.S. EN 1753:2019 Magnesium and magnesium alloys - Magnesium alloy ingots and castings CEN 10/14/2019

I.S. EN 1822-1:2019High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification,performance testing, marking CEN 4/28/2019

I.S. EN 1849-2:2019Flexible sheets for waterproofing - Determination of thickness and mass per unitarea - Part 2: Plastics and rubber sheets for roof waterproofing CEN 7/28/2019


I.S. EN 1869:2019 Fire blankets CEN 9/1/2019

I.S. EN 1971-1:2019Copper and copper alloys - Eddy current test for measuring defects on seamlessround copper and copper alloy tubes - Part 1: Test with an encircling test coil onthe outer surface

CEN 12/8/2019

I.S. EN 1971-2:2019Copper and copper alloys - Eddy current test for measuring defects on seamlessround copper and copper alloy tubes - Part 2: Test with an internal probe on theinner surface

CEN 12/8/2019

I.S. EN 1992-1-2:2004/A1:2019Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structuralfire design CEN 6/2/2019

I.S. EN 1993-1-5:2006/A2:2019 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements CEN 8/18/2019

I.S. EN 2002-16:2019Aerospace series - Metallic materials - Test methods - Part 16: Non-destructivetesting - Penetrant testing CEN 12/16/2019

I.S. EN 2002-21:2019Aerospace series - Metallic materials - Test methods - Part 21: Radiographictesting of castings CEN 12/16/2019

I.S. EN 2070-4:1990 Aerospace series - Aluminium and aluminium alloy wrought products - Technicalspecification - Part 4: Tube for structures

CEN 12/21/1990



Reference Title En Origin Body Publication D..I.S. EN 2002-21:2019Aerospace series - Metallic materials - Test methods - Part 21: Radiographictesting of castings CEN 12/16/2019

I.S. EN 2070-4:1990Aerospace series - Aluminium and aluminium alloy wrought products - Technicalspecification - Part 4: Tube for structures CEN 12/21/1990

I.S. EN 2070-5:1990Aerospace series - Aluminium and aluminium alloy wrought products - Technicalspecification - Part 5: Tube used under pressure CEN 12/21/1990

I.S. EN 2070-6:1990Aerospace series - Aluminium and aluminium alloy wrought products - Technicalspecification - Part 6: Rivet wire CEN 12/21/1990

I.S. EN 2076-1:1989/A1:1994Aerospace series - Aluminium and magnesium alloy ingots and castings -Technical specification - Part 1: General requirements CEN 4/26/1994

I.S. EN 2076-3:1990Aerospace series - Aluminium and magnesium alloy ingots and castings -Technical specification - Part 3: Pre-production and production castings CEN 12/21/1990

I.S. EN 2082-3:1990Aerospace series - Aluminium alloy forging stock and forgings - Technicalspecification - Part 3: Pre-production and production forgings CEN 12/21/1990

I.S. EN 2093:1993Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm < or= a < or = 150 mm CEN 6/1/1993

I.S. EN 2094:1993Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm < or = a< or = 150 mm CEN 6/1/1993

I.S. EN 2114:2019Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D â‰ ¤ 10mm CEN 6/16/2019

I.S. EN 2125:2019Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a â‰ ¤120 mm CEN 9/22/2019

I.S. EN 2139:1990 Aerospace series - Washers, flat heat resisting steel CEN 12/21/1990

I.S. EN 2155-8:1990Aerospace series - Test methods for transparent materials for aircraft glazing -Part 1: Determination of optical distortion CEN 12/21/1990

I.S. EN 2155-9:1990Aerospace series - Test method for transparent materials for aircraft glazing -Part 9 : Determination of haze CEN 12/21/1990

I.S. EN 2155-21:1990Aerospace series - Test methods for transparent materials for aircraft glazing -Part 21: Determination of resistance to crack propagation (K factor) CEN 12/21/1990

I.S. EN 2240-071:2011Aerospace series - Lamps, incandescent - Part 071: Lamp, code 3011 - Productstandard CEN 8/12/2011









I.S. EN 2240-080:2011Aerospace series - Lamps, incandescent - Part 080: Lamp, code 7007-704 -Product standard CEN 8/12/2011



I.S. EN 2288:2019Aerospace series - Bush, flanged, corrosion resisting steel, with self-lubricatingliner - Dimensions and loads CEN 3/10/2019

I.S. EN 2309:1990 Aerospace series - Hole sizes for solid rivets CEN 7/27/1990

I.S. EN 2320:2019 Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a â‰ ¤ 75 mm CEN 4/7/2019

I.S. EN 2321:2019Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a â‰ ¤ 150mm CEN 4/14/2019

I.S. EN 2348:1989 Aerospace series - Control cable assemblies - Technical specification CEN 10/17/1989

I.S. EN 2353:1989Aerospace series - Turnbarrels, control cable in corrosion resisting steel -Dimensions and loads CEN 10/17/1989

I.S. EN 2354:1989Aerospace series - Eye-ends, threaded, control cable in corrosion resisting steel- Dimensions and loads CEN 10/17/1989

I.S. EN 2355:1989 Aerospace series - Fork-ends, threaded, control cable in corrosion resisting steel- Dimensions and loads

CEN 10/17/1989



Reference Title En Origin Body Publication D..I.S. EN 2354:1989Aerospace series - Eye-ends, threaded, control cable in corrosion resisting steel- Dimensions and loads CEN 10/17/1989

I.S. EN 2355:1989Aerospace series - Fork-ends, threaded, control cable in corrosion resisting steel- Dimensions and loads CEN 10/17/1989

I.S. EN 2356:1989Aerospace series - Fork-ends threaded, control cable for rolling bearings incorrosion resisting steel - Dimensions and loads CEN 10/17/1989

I.S. EN 2357:1989Aerospace series - Stud-ends in corrosion resisting steel swaged on type,control cable - Dimensions and loads CEN 10/17/1989

I.S. EN 2358:1989Aerospace series - Eye-ends in corrosion resisting steel swaged on type, controlcable - Dimensions and loads CEN 10/17/1989

I.S. EN 2359:1989Aerospace series - Fork-ends in corrosion resisting steel swaged on type, controlcable - Dimensions and loads CEN 10/17/1989

I.S. EN 2360:1989Aerospace series - Fork-ends for rolling bearings in corrosion resisting steelswaged on type, control cable - Dimensions and loads CEN 10/17/1989

I.S. EN 2361:1989Aerospace series - Ball-ends, double shank in corrosion resisting steel swagedon type, control cable - Dimensions and loads CEN 10/17/1989

I.S. EN 2362:1989Aerospace series - Ball-ends in corrosion resisting steel swaged on type, controlcable - Dimensions and loads CEN 10/17/1989

I.S. EN 2363:1989 Aerospace series - Locking clips for turnbuckles of control cables - Dimensions CEN 10/17/1989

I.S. EN 2364:1990 Aerospace series - Pins, shear, headed, close tolerance CEN 12/21/1990

I.S. EN 2365:1990 Aerospace series - Collars, aluminium alloy CEN 12/21/1990

I.S. EN 2366:2019Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled -Thickness a â‰ ¤ 3 mm - Dimensions CEN 9/22/2019

I.S. EN 2367:1990 Aerospace series - Split pins in steel EN 2573 CEN 12/21/1990

I.S. EN 2390:2019Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0,6 mmâ‰ ¤ a â‰ ¤ 12,5 mm CEN 10/7/2019

I.S. EN 2400:2019Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn andprecipitation treated - Wire - D â‰ ¤ 10 mm CEN 12/16/2019

I.S. EN 2414:2019Aerospace series - Washers, chamfered, with counterbore, in alloy steel,cadmium plated CEN 5/19/2019

I.S. EN 2450:2018Aerospace series - Steel 31Ni10 - 1 230 MPa â‰ ¤ Rm â‰ ¤ 1 420 MPa - Bars -De â‰ ¤ 40 mm CEN 1/15/2019

I.S. EN 2451:2019Aerospace series - Steel 31Ni10 - 1 230 MPa â‰ ¤ Rm â‰ ¤ 1 420 MPa -Forgings - De â‰ ¤ 40 mm CEN 12/22/2019

I.S. EN 2465:2019Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened - 450 MPa â‰ ¤ Rmâ‰ ¤ 680 MPa - Bars for machining - 4 mm â‰ ¤ De â‰ ¤ 100 mm CEN 9/22/2019

I.S. EN 2468:2019Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm â‰ ¤ a â‰ ¤ 5mm CEN 4/21/2019

I.S. EN 2470:2019Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets -1 mm â‰ ¤ D â‰ ¤ 10 mm CEN 4/21/2019

I.S. EN 2476:2019Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa â‰ ¤ Rm â‰ ¤ 1 300MPa - Forgings - De â‰ ¤ 100 mm CEN 12/22/2019

I.S. EN 2484:1990 Aerospace series - Microfilming of drawings - Aperture card for 35 mm microfilm CEN 7/27/1990

I.S. EN 2497:1990 Aerospace series - Dry abrasive blasting of titanium and titanium alloys CEN 7/27/1990

I.S. EN 2502:2019Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa â‰ ¤ Rmâ‰ ¤ 1 080 MPa - Bars CEN 12/22/2019

I.S. EN 2503:2019Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa â‰ ¤ Rmâ‰ ¤ 1 080 MPa - Forgings - De â‰ ¤ 150 mm CEN 12/23/2019

I.S. EN 2510:2019Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structuralapplications CEN 6/16/2019

I.S. EN 2566:2019 Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD CEN 6/16/2019



I.S. EN 2575:1990 Aerospace series - Filming of documents - 16 mm microfilm CEN 7/27/1990

I.S. EN 2583:2019Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloyNI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambienttemperature)/650Â°C - Technical specification

CEN 5/19/2019

I.S. EN 2584:2019Aerospace series - Bearings, spherical plain in corrosion resisting steel withself-lubricating liner - Narrow series - Elevated load at ambient temperature -Dimensions and loads

CEN 3/17/2019

I.S. EN 2585:2019 Aerospace series - Bearing, spherical plain in corrosion resisting steel withself-lubricating liner - Wide series - Elevated load at ambient temperature -Dimensions and loads

CEN 3/17/2019



Reference Title En Origin Body Publication D..I.S. EN 2584:2019

Aerospace series - Bearings, spherical plain in corrosion resisting steel withself-lubricating liner - Narrow series - Elevated load at ambient temperature -Dimensions and loads CEN 3/17/2019

I.S. EN 2585:2019Aerospace series - Bearing, spherical plain in corrosion resisting steel withself-lubricating liner - Wide series - Elevated load at ambient temperature -Dimensions and loads

CEN 3/17/2019

I.S. EN 2600:2018 Aerospace series - Designation of metallic semi-finished products - Rules CEN 1/15/2019

I.S. EN 2609:1989Aerospace series - Turnbarrels, control cable in copper-zinc alloys - Dimensionsand loads CEN 10/17/1989

I.S. EN 2638:2019Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2mm â‰ ¤ (a or D) â‰ ¤ 150 mm with coarse peripheral grain control CEN 6/16/2019

I.S. EN 2641:1989 Aerospace series - Control cable assemblies - Combinations and dimensions CEN 10/17/1989

I.S. EN 2667-3:2019Aerospace series - Non-metallic materials - Foaming structural adhesive films -Test methods - Part 3: Expansion ratio and volatile content CEN 9/22/2019

I.S. EN 2699:2019Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) -Drawn bar - 6 mm â‰ ¤ D â‰ ¤ 50 mm CEN 4/14/2019

I.S. EN 2752:1990Aerospace series - Nuts, anchor, self locking fixed, two lug, reduced series, withcounterbore - Classification : 1100 MPa/235 degree C CEN 12/21/1990

I.S. EN 2798:2019Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set -Hardness 80 IRHD CEN 6/16/2019

I.S. EN 2812:2019 Aerospace series - Stripping of electric cables CEN 7/26/2019

I.S. EN 2816:2019Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electroderemelted - Solution treated and precipitation treated - Forgings - a or D â‰ ¤200 mm - Rm â‰ ¥ 965 MPa

CEN 10/14/2019

I.S. EN 2868:2019Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normalacross flats, in heat resisting steel, silver plated - Classification: 1 100 MPa (atambient temperature)/650 Â°C

CEN 3/24/2019

I.S. EN 2876:2019Aerospace series - Nuts, hexagon, plain, reduced height, normal across flats, inaluminium alloy, anodized - Classification: 450 MPa (at ambienttemperature)/120 Â°C

CEN 3/24/2019

I.S. EN 2878:2018+AC:2019Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, twolug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated -Classification: 900 MPa (at ambient temperature)/235 Â°C

CEN 5/1/2019

I.S. EN 2880:2018+AC:2019Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 003: Grommet nut, style A - Product standard CEN 4/28/2019

I.S. EN 2887:1996Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosionresisting steel, passivated - Classification: 600 MPa (at ambient temperature) /425 Â°C

CEN 5/3/1996

I.S. EN 2923:2019Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, inheat resisting steel, silver plated - Classification: 600 MPa (at ambienttemperature) / 425 Â°C

CEN 4/21/2019

I.S. EN 2924:2019Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, inheat resisting steel, silver plated, left hand thread - Classification: 600 MPa (atambient temperature) / 425 Â°C

CEN 4/21/2019

I.S. EN 2938:1996Aerospace series - Screws, hexagon head, threaded to head, in heat resistingsteel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambienttemperature) / 650 Â°C

CEN 9/6/1996

I.S. EN 2943:2019Aerospace series - Inserts, MJ and M screw threads, helical coil - Technicalspecification CEN 12/8/2019

I.S. EN 2949:1997 Aerospace series - Washers, wire locking, in corrosion resisting steel, passivatedCEN 8/15/1997

I.S. EN 2951:2019Aerospace series - Metallic materials - Micrographic determination of content ofnon-metallic inclusions CEN 6/16/2019

I.S. EN 2952:2019Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and coldworked - Bar for forged fasteners - D â‰ ¤ 50 mm - 1 270 MPa â‰ ¤ Rm â‰ ¤1 550 MPa

CEN 4/21/2019

I.S. EN 2957:2019 Aerospace series - Method of preparation of forged samples CEN 10/14/2019

I.S. EN 2959:2019Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) -Solution treated and cold worked - Bar for forged fasteners - 3 mm â‰ ¤ Dâ‰ ¤ 30 mm

CEN 6/23/2019

I.S. EN 2997-011:2019Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fireresistant or non fire resistant, operating temperatures -65 Â°C to 175 Â°Ccontinuous, 200 Â°C continuous, 260 Â°C peak - Part 011: Dummy receptacle ..

CEN 12/22/2019

I.S. EN 3001:2019Aerospace series - Tempered float glass plies for aircraft applications - Technicalspecification CEN 6/23/2019

I.S. EN 3012:1996Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel basealloy NI-P101HT (Waspaloy) - Classification: 1 210 MPa (at ambienttemperature) / 730 Â°C

CEN 9/6/1996

I.S. EN 3018:2019Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) -Consumable electrode remelted - Cold drawn wire for the manufacture of threadinserts - D â‰ ¤ 3 mm

CEN 12/22/2019

I.S. EN 3086:2019 Aerospace series - Hose assemblies - Designation limited to 15 digits CEN 6/16/2019

I.S. EN 3155-003:2019Aerospace series - Electrical contacts used in elements of connection - Part 003:Contacts, electrical, female, type A, crimp, class S - Product standard CEN 11/10/2019

I.S. EN 3155-004:2019Aerospace series - Electrical contacts used in elements of connection - Part 004:Contacts, electrical, male, type A, crimp, class T - Product standard CEN 4/14/2019

I.S. EN 3155-005:2019Aerospace series - Electrical contacts used in elements of connection - Part 005:Contacts, electrical, female, type A, crimp, class T - Product standard CEN 4/14/2019

I.S. EN 3155-008:2019 Aerospace series - Electrical contacts used in elements of connection - Part 008:Contacts, electrical, male, type A, crimp, class S - Product standard

CEN 9/29/2019



Reference Title En Origin Body Publication D..I.S. EN 3155-005:2019Aerospace series - Electrical contacts used in elements of connection - Part 005:Contacts, electrical, female, type A, crimp, class T - Product standard CEN 4/14/2019

I.S. EN 3155-008:2019Aerospace series - Electrical contacts used in elements of connection - Part 008:Contacts, electrical, male, type A, crimp, class S - Product standard CEN 9/29/2019






I.S. EN 3155-026:2019Aerospace series - Electrical contacts used in elements of connection - Part 026:Contacts, electrical, male, type A, crimp, class R - Product standard CEN 9/8/2019

I.S. EN 3155-027:2019Aerospace series - Electrical contacts used in elements of connection - Part 027:Contacts, electrical, female, type A, crimp, class R - Product standard CEN 9/8/2019

I.S. EN 3155-044:2019Aerospace series - Electrical contacts used in elements of connection - Part 044:Contacts, electrical, male 044, type A, double crimping, class T - Productstandard

CEN 12/30/2019

I.S. EN 3155-045:2019Aerospace series - Electrical contacts used in elements of connection - Part 045:Contacts, electrical, female, type A, double crimping, class T - Product standard CEN 12/30/2019

I.S. EN 3155-065:2019Aerospace series - Electrical contacts used in elements of connection - Part 065:Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard CEN 9/15/2019



I.S. EN 3155-076:2019Aerospace series - Electrical contacts used in elements of connection - Part 076:Contacts, electrical, male, type A, crimp, class R - Product standard CEN 12/30/2019

I.S. EN 3155-077:2019Aerospace series - Electrical contacts used in elements of connection - Part 077:Contacts, electrical, female, type A, crimp, class R - Product standard CEN 12/30/2019

I.S. EN 3155-078:2019Aerospace series - Electrical contacts used in elements of connection - Part 078:Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S - Productstandard

CEN 6/30/2019

I.S. EN 3155-079:2019Aerospace series - Electrical contacts used in elements of connection - Part 079:Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Productstandard

CEN 9/22/2019

I.S. EN 3155-080:2019Aerospace series - Electrical contacts used in elements of connection - Part 080:Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Productstandard

CEN 9/15/2019

I.S. EN 3155-081:2019Aerospace series - Electrical contacts used in elements of connection - Part 081:Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T - Productstandard

CEN 9/29/2019


I.S. EN 3155-083:2019Aerospace series - Electrical contacts used in elements of connection - Part 083:Contact, electrical, female, type A, crimp, class S, size 8 - Product standard CEN 9/29/2019

I.S. EN 3220:2019Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold workedand softened - Bar and wire for continuous forging or extrusion for fasteners - 3mm â‰ ¤ D â‰ ¤ 30 mm

CEN 4/21/2019

I.S. EN 3275:2019Aerospace series - Pipe coupling 8Â°30' up to 28 000 kPa Dynamic beam seal -Metric series - Technical specification CEN 5/19/2019

I.S. EN 3278:2019Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel,passivated (0,25 mm wall thickness) CEN 11/10/2019

I.S. EN 3299:2019Aerospace series - Shaft-nuts and threaded rings, self-locking, right- orleft-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated -Technical specification

CEN 7/28/2019

I.S. EN 3314:2019Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Barfor machining - D â‰ ¤ 75 mm CEN 4/21/2019

I.S. EN 3357:2019Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum inductionmelted and consumable electrode remelted - Solution treated and precipitationtreated - Bar for machining - a or D â‰ ¤ 150 mm - 1 200 MPa â‰ ¤ Rm â‰ ..

CEN 7/7/2019

I.S. EN 3371:2019 Aerospace series - Electrical bonding - Technical specification CEN 9/8/2019

I.S. EN 3378:2019Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mmâ‰ ¤ D â‰ ¤ 10 mm CEN 6/23/2019

I.S. EN 3460:2019Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or Dâ‰ ¤ 150 mm - Rm â‰ ¥ 390 MPa CEN 6/23/2019

I.S. EN 3468:2019Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPaâ‰ ¤ Rm â‰ ¤ 700 MPa - Forgings - De â‰ ¤ 100 mm CEN 12/16/2019

I.S. EN 3470:2019Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum inductionmelted and consumable electrode remelted - Solution treated and precipitationtreated - Forgings - a or D â‰ ¤ 150 mm - 1 200 MPa â‰ ¤ Rm â‰ ¤ 1 400 ..

CEN 4/21/2019

I.S. EN 3475-418:2019Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418:Thermal endurance for conductors CEN 7/7/2019

I.S. EN 3481:2019 Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Referenceheat treatment: softened - Hollow bars - 5 mm â‰ ¤ a â‰ ¤ 12 mm

CEN 12/16/2019



Reference Title En Origin Body Publication D..I.S. EN 3475-418:2019Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418:Thermal endurance for conductors CEN 7/7/2019

I.S. EN 3481:2019Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Referenceheat treatment: softened - Hollow bars - 5 mm â‰ ¤ a â‰ ¤ 12 mm CEN 12/16/2019

I.S. EN 3482:2019Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Referenceheat treatment: softened - Forging stock - De â‰ ¤ 100 mm CEN 12/16/2019

I.S. EN 3484:2019Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast -Reference heat treatment: homogenised, solution treated, precipitationhardened and sub zero - Remelting stock

CEN 12/22/2019

I.S. EN 3486:2019Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed andprecipitation hardened - 1 400 â‰ ¤ Rm â‰ ¤ 1 550 MPa - Forgings - De â‰ ¤100 mm

CEN 12/22/2019

I.S. EN 3489:2019Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 â‰ ¤Rm â‰ ¤ 750 MPa - Tubes for structures - 0,5 â‰ ¤ a â‰ ¤ 5 mm CEN 12/22/2019

I.S. EN 3510:2019Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) -Solution treated and precipitation treated - Bars and sections - De â‰ ¤ 100mm

CEN 10/7/2019

I.S. EN 3645-001:2019Aerospace series - Connectors, electrical, circular, scoop-proof, triple startthreaded coupling, operating temperature 175 Â°C or 200 Â°C continuous - Part001: Technical specification

CEN 9/8/2019

I.S. EN 3645-004:2019Aerospace series - Connectors, electrical, circular, scoop-proof, triple startthreaded coupling, operating temperature 175 Â°C or 200 Â°C continuous - Part004: Receptacle, hermetic, square flange mounting - Product standard

CEN 4/14/2019

I.S. EN 3645-005:2019Aerospace series - Connectors, electrical, circular, scoop-proof, triple startthreaded coupling, operating temperature 175 Â°C or 200 Â°C continuous - Part005: Receptacle, hermetic, round flange, solder mounting - Product standard

CEN 6/30/2019

I.S. EN 3645-009:2019Aerospace series - Connectors, electrical, circular, scoop-proof, triple startthreaded coupling, operating temperature 175 Â°C or 200 Â°C continuous - Part009: Receptacle, round flange, jam nut mounting - Product standard

CEN 4/14/2019

I.S. EN 3645-010:2019Aerospace series - Connectors, electrical, circular, scoop-proof, triple startthreaded coupling, operating temperature 175 Â°C or 200 Â°C continuous - Part010: Receptacle, hermetic, round flange, jam nut mounting - Product standard

CEN 6/30/2019

I.S. EN 3645-013:2019Aerospace series - Connectors, electrical, circular, scoop-proof, triple startthreaded coupling, operating temperature 175 Â°C or 200 Â°C continuous - Part013: Dummy receptacle - Product standard

CEN 6/30/2019

I.S. EN 3660-001:2019Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 001: Technical specification CEN 7/7/2019

I.S. EN 3660-004:2018+AC:2019Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 004: Cable outlet, style A, straight, unsealed withclamp strain relief - Product standard

CEN 5/12/2019

I.S. EN 3660-005:2018+AC:2019Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 005: Cable outlet, style A, 90Â°, unsealed withclamp strain relief - Product standard

CEN 5/19/2019

I.S. EN 3660-033:2019Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 033: Stainless steel banding band, style Z, forattachment of individual and/or overall screens to cable outlets - Product stand..

CEN 11/10/2019

I.S. EN 3685:2019Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) -Classification: 1 100 MPa/650 Â°C - Technical specification CEN 10/14/2019

I.S. EN 3740:2019Aerospace series - Bolts, shouldered, thin hexagonal head, close toleranceshank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1100 MPa (at ambient temperature)/315 Â°C

CEN 11/10/2019

I.S. EN 3745-404:2019Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part404: Thermal shock CEN 10/7/2019

I.S. EN 3818:2019Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strengthclass: 1 100 MPa (at ambient temperature) - Technical specification CEN 5/26/2019

I.S. EN 3833:2019Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloyNI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambienttemperature) / 650 Â°C - Technical specification

CEN 4/21/2019

I.S. EN 3837:2019Aerospace series - Paints and varnishes - Nature and method for surfacepreparation of test pieces in aluminium alloys CEN 9/15/2019

I.S. EN 3844-1:2019Aerospace series - Flammability of non-metallic materials - Part 1: Small burnertest, vertical - Determination of the vertical flame propagation CEN 9/15/2019

I.S. EN 3844-2:2019Aerospace series - Flammability of non-metallic materials - Part 2: Small burnertest, horizontal - Determination of the horizontal flame propagation CEN 9/15/2019

I.S. EN 3844-3:2019Aerospace series - Flammability of non-metallic materials - Part 3: Small burnertest, 45Â° - Determination of the resistance of material to flame and glowpropagation and to flame penetration

CEN 9/15/2019

I.S. EN 3847:2019 Aerospace series - Paints and varnishes - Determination of sedimentation rating CEN 10/7/2019

I.S. EN 4056-003:2019Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties -Operating temperatures - 65 Â°C to 105 Â°C and - 65 Â°C to 150 Â°C - Productstandard

CEN 9/22/2019

I.S. EN 4161:2019Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerancenormal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100PMa (at ambient temperature)/235 Â°C

CEN 11/10/2019

I.S. EN 4165-022:2019Aerospace series - Connectors, electrical, rectangular, modular - Operatingtemperature 175 Â°C continuous - Part 022: Insertion/extraction tool forremoval of modules - Product standard

CEN 11/10/2019

I.S. EN 4289:2019 Aerospace series - Aluminium alloy AL-P7175- Forging stock CEN 4/14/2019

I.S. EN 4400-1:2019Aerospace series - Aluminium and aluminium- and magnesium- alloys -Technical specification - Part 1: Aluminium and aluminium alloy plate CEN 4/14/2019

I.S. EN 4400-2:2019Aerospace series - Aluminium and aluminium- and magnesium- alloys -Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip CEN 4/14/2019

I.S. EN 4400-3:2019Aerospace series - Aluminium and aluminium- and magnesium- alloys -Technical specification - Part 3: Aluminium and aluminium alloy bar and section CEN 4/14/2019

I.S. EN 4400-6:2019 Aerospace series - Aluminium and aluminium- and magnesium- alloys -Technical specification - Part 6: Aluminium alloy forging stock

CEN 4/14/2019



Reference Title En Origin Body Publication D..I.S. EN 4400-3:2019Aerospace series - Aluminium and aluminium- and magnesium- alloys -Technical specification - Part 3: Aluminium and aluminium alloy bar and section CEN 4/14/2019

I.S. EN 4400-6:2019Aerospace series - Aluminium and aluminium- and magnesium- alloys -Technical specification - Part 6: Aluminium alloy forging stock CEN 4/14/2019

I.S. EN 4476:2019 Aerospace series - Paints and varnishes - Cold curing intermediate coat CEN 10/14/2019

I.S. EN 4529-002:2019Aerospace series - Elements of electrical and optical connection - Sealing plugs -Part 002: Index of product standards CEN 6/23/2019

I.S. EN 4539-2:2019Aerospace series - Bearing, spherical, plain, in corrosion resisting steel withself-lubricating liner - Elevated load under low oscillations - Wide series -Dimensions and loads - Part 2: Inch series

CEN 11/10/2019

I.S. EN 4551:2014Aerospace series - Pipe coupling, 37Â°, in heat resisting steel - Swivel nuts -Inch series CEN 10/18/2014

I.S. EN 4604-001:2019Aerospace series - Cable, electrical, for signal transmission - Part 001: Technicalspecification CEN 6/23/2019

I.S. EN 4604-003:2019Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable,coaxial, 50 ohms, 200 Â°C, type WZ - Product standard CEN 10/14/2019

I.S. EN 4604-006:2019Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable,coaxial, 50 ohms, 200 Â°C, type WM - Product standard CEN 10/14/2019

I.S. EN 4604-007:2019Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable,coaxial, 50 ohms, 200 Â°C, type WN - Product standard CEN 12/30/2019

I.S. EN 4608-001:2019Aerospace series - Cable, electrical, fire resistant - Single and twisted multicoreassembly, screened (braided) and jacketed - Operating temperatures between -65 Â°C and 260 Â°C - Part 001: Technical specification

CEN 7/7/2019

I.S. EN 4609:2019Aerospace series - Spiral drive recesses for threaded fasteners - Geometricaldefinition and technical requirements CEN 11/24/2019

I.S. EN 4612-002:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 002:Genera

CEN 9/8/2019

I.S. EN 4612-003:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 003: Tinplated copper - Operating temperatures, between - 65 Â°C and 135 Â°C - Sing..

CEN 9/15/2019

I.S. EN 4612-004:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tinplated copper - Operating temperatures, between - 65 Â°C and 135 Â°C - Sing..

CEN 9/8/2019

I.S. EN 4612-005:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 005: Tinplated copper - Operating temperatures, between - 65 Â°C and 135 Â°C - Dual..

CEN 9/8/2019

I.S. EN 4612-006:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tinplated copper - Operating temperatures, between - 65 Â°C and 135 Â°C - Dual..

CEN 9/8/2019

I.S. EN 4612-007:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 007: Silverplated copper - Operating temperatures, between - 65 Â°C and 150 Â°C - Sing..

CEN 9/22/2019

I.S. EN 4612-008:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 008: Silverplated copper - Operating temperatures, between - 65 Â°C and 150 Â°C - Sing..

CEN 9/15/2019

I.S. EN 4612-009:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silverplated copper - Operating temperatures, between - 65 Â°C and 150 Â°C - Dual..

CEN 9/15/2019

I.S. EN 4612-010:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silverplated copper - Operating temperatures, between - 65 Â°C and 150 Â°C - Dual..

CEN 9/8/2019

I.S. EN 4612-011:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 011:Nickel plated copper - Operating temperatures, between - 65 Â°C and 150 Â°C..

CEN 9/15/2019

I.S. EN 4612-012:2019Aerospace series - Cables, electrical, for general purpose, single and multicoreassembly - XLETFE Family - Jacketed or screened and jacketed - Part 012:Nickel plated copper - Operating temperatures, between - 65 Â°C and 150 Â°C..

CEN 9/22/2019

I.S. EN 4660-003:2019Aerospace series - Modular and Open Avionics Architectures - Part 003:Communications/Network CEN 9/8/2019

I.S. EN 4660-004:2019Aerospace series - Modular and Open Avionics Architectures - Part 004:Packaging CEN 9/8/2019

I.S. EN 4660-005:2019Aerospace series - Modular and Open Avionics Architectures - Part 005:Software CEN 9/8/2019

I.S. EN 4681-001:2019Aerospace series - Cables, electric, general purpose, with conductors inaluminium or copper-clad aluminium - Part 001: Technical specification CEN 12/22/2019

I.S. EN 4681-005:2019Aerospace series - Cables, electric, general purpose, with conductors inaluminium or copper-clad aluminium - Part 005: AZ family, single, for use in lowpressure atmosphere - Product standard

CEN 6/30/2019

I.S. EN 4681-006:2019Aerospace series - Cables, electric, general purpose, with conductors inaluminium or copper-clad aluminium - Part 006: AZA family, single andmulticore assembly, for use in low pressure atmosphere - Product standard

CEN 6/30/2019

I.S. EN 4706:2019 Aerospace series - LED colour and brightness ranking CEN 7/26/2019

I.S. EN 4708-001:2019Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 001: Technical specification CEN 7/26/2019

I.S. EN 4708-103:2019Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 103: Fluoroelastomer sleeves - Operating temperature -55Â°C to 200 Â°C - Product standard

CEN 6/16/2019

I.S. EN 4708-105:2019Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 105: Semi-flexible polyvinylidene fluoride (PVDF) -Temperature range â€“ 55 Â°C to 150 Â°C - Product standard

CEN 9/29/2019

I.S. EN 4708-107:2019Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 107: Polytetrafluoroethylene (PTFE) - Operatingtemperatures - 65 Â°C to 260 Â°C - Product standard

CEN 10/14/2019

I.S. EN 4708-108:2019 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 108: Limited fire hazard sleeving - Operating temperatures -65 Â°C to 150 Â°C - Product standard

CEN 10/14/2019



Reference Title En Origin Body Publication D..I.S. EN 4708-107:2019

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 107: Polytetrafluoroethylene (PTFE) - Operatingtemperatures - 65 Â°C to 260 Â°C - Product standard CEN 10/14/2019

I.S. EN 4708-108:2019Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 108: Limited fire hazard sleeving - Operating temperatures -65 Â°C to 150 Â°C - Product standard

CEN 10/14/2019

I.S. EN 4726:2018+AC:2019Aerospace series - Acceptance parameters of aesthetical variations for all visibleequipment installed in aircraft cabins under all contractual variations CEN 4/28/2019

I.S. EN 4827:2019Aerospace series - Hexavalent chromium free anodizing of aluminium andaluminium alloys CEN 10/14/2019

I.S. EN 4838-005:2019Aerospace series - Arc fault circuit breakers, single-pole, temperaturecompensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant Frequency- Part 005: With polarized signal contact - Product standard

CEN 7/7/2019

I.S. EN 4840-102:2019Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric,semi-rigid, temperature range -75 to 150 Â°C - Product Standard CEN 12/23/2019

I.S. EN 4842:2019Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted(ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar formachining - a or D â‰ ¤ 250 mm - 1 070 MPa â‰ ¤ Rm â‰ ¤ 1 200 MPa - Pr..

CEN 6/16/2019

I.S. EN 4852:2019Aerospace series - External spiral drive heads for threaded fasteners -Geometrical definition and fastener head wrenching configuration CEN 6/16/2019

I.S. EN 4854-1:2019Aerospace series - Bearing, spherical plain, in corrosion resisting steel withself-lubricating liner, low starting torque and low friction coefficient, elevatedduty cycles under low oscillations at different operating conditions, narrow seri..

CEN 11/10/2019

I.S. EN 4854-2:2019Aerospace series - Bearing, spherical plain, in corrosion resisting steel withself-lubricating liner, low starting torque and low friction coefficient, elevatedduty cycles under low oscillations at different operating conditions, wide series ..

CEN 11/10/2019

I.S. EN 4854-3:2019Aerospace series â€” Bearing, spherical plain, in corrosion resisting steel withself-lubricating liner, low starting torque and low friction coefficient, elevatedduty cycles under low oscillations at different operating conditions â€” Part 3: ..

CEN 11/10/2019

I.S. EN 4859:2019Aerospace series - Sensor based clamp load determination / high tensile bolts -Technical specification CEN 3/10/2019

I.S. EN 4867:2019 Aerospace series - Laser surface marking by discoloration CEN 7/7/2019

I.S. EN 4868:2019 Aerospace series - Anodic electrodeposition of hexavalent chromium free primerCEN 9/22/2019

I.S. EN 6049-004:2019Aerospace series - Electrical cables, installation - Protection sleeve inmeta-aramid fibres - Part 004: Braided, tubular, high expandable - Productstandard

CEN 9/29/2019

I.S. EN 6055:2019Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel,external threaded shank - Dimensions and loads - Inch series CEN 5/19/2019

I.S. EN 6056:2019Aerospace series - Rod-end with bearing per EN 4614 with self lubricating linerin corrosion resisting steel with external threaded shank - Dimensions and loads- Inch series

CEN 5/19/2019

I.S. EN 6059-305:2019Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 305: Fluid absorption CEN 7/26/2019

I.S. EN 6059-402:2019Aerospace Series - Electrical cables, installation - Protection sleeves - Testmethods - Part 402: Bending properties CEN 4/14/2019

I.S. EN 6059-407:2019Aerospace series - Electrical cables, installation - Protection sleeves - Testmethods - Part 407: Mark adherence and print permanence CEN 7/26/2019

I.S. EN 6096:2019Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wideinner ring in corrosion resisting steel - Dimensions and loads - Inch series CEN 5/19/2019

I.S. EN 6097:2019Aerospace series - Bearing, spherical plain, metal to metal, extra wide inner ringin corrosion resisting steel - Dimensions and loads - Inch series CEN 5/19/2019

I.S. EN 6098:2019Aerospace series - Rod-end with bearing per EN 6097 in corrosion resistingsteel, extra wide inner ring, external threaded shank - Dimensions and loads -Inch series

CEN 5/19/2019

I.S. EN 6133:2019Aerospace series - Rod-end, with bearing per EN 6096, with self-lubricating linerin corrosion resisting steel, extra wide inner ring, external threaded shank -Dimensions and loads - Inch series

CEN 5/19/2019

I.S. EN 9138:2019Aerospace Series - Quality Management Systems - Statistical Product -Acceptance Requirements CEN 11/24/2019

I.S. EN 10025-2:2019Hot rolled products of structural steels - Part 2: Technical delivery conditions fornon-alloy structural steels CEN 9/1/2019

I.S. EN 10025-3:2019Hot rolled products of structural steels - Part 3: Technical delivery conditions fornormalized/normalized rolled weldable fine grain structural steels CEN 9/1/2019

I.S. EN 10025-4:2019Hot rolled products of structural steels - Part 4: Technical delivery conditions forthermomechanical rolled weldable fine grain structural steels CEN 9/1/2019

I.S. EN 10025-5:2019Hot rolled products of structural steels - Part 5: Technical delivery conditions forstructural steels with improved atmospheric corrosion resistance CEN 9/1/2019

I.S. EN 10025-6:2019Hot rolled products of structural steels - Part 6: Technical delivery conditions forflat products of high yield strength structural steels in the quenched andtempered condition

CEN 9/1/2019

I.S. EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels CEN 7/31/2016

I.S. EN 10136:2019Steels and cast irons - Determination of nickel content - Flame atomicabsorption spectrometric method (FAAS) CEN 6/30/2019

I.S. EN 10177:2019Steels - Determination of calcium content - Flame atomic absorptionspectrometric method (FAAS) CEN 6/30/2019

I.S. EN 10181:2019Steels - Determination of lead content - Flame atomic absorption spectrometricmethod (FAAS) CEN 6/30/2019

I.S. EN 10210-2:2019 Hot finished steel structural hollow sections - Part 2: Tolerances, dimensionsand sectional properties

CEN 5/26/2019



Reference Title En Origin Body Publication D..I.S. EN 10181:2019Steels - Determination of lead content - Flame atomic absorption spectrometricmethod (FAAS) CEN 6/30/2019

I.S. EN 10210-2:2019Hot finished steel structural hollow sections - Part 2: Tolerances, dimensionsand sectional properties CEN 5/26/2019

I.S. EN 10216-2:2013+A1:2019Seamless steel tubes for pressure purposes - Technical delivery conditions - Part2: Non-alloy and alloy steel tubes with specified elevated temperatureproperties

CEN 1/6/2020

I.S. EN 10217-1:2019Welded steel tubes for pressure purposes - Technical delivery conditions - Part1: Electric welded and submerged arc welded non-alloy steel tubes withspecified room temperature properties

CEN 5/5/2019

I.S. EN 10217-2:2019Welded steel tubes for pressure purposes - Technical delivery conditions - Part2: Electric welded non-alloy and alloy steel tubes with specified elevatedtemperature properties

CEN 5/5/2019

I.S. EN 10217-3:2019Welded steel tubes for pressure purposes - Technical delivery conditions - Part3: Electric welded and submerged arc welded alloy fine grain steel tubes withspecified room, elevated and low temperature properties

CEN 5/5/2019

I.S. EN 10217-4:2019Welded steel tubes for pressure purposes - Technical delivery conditions - Part4: Electric welded non-alloy steel tubes with specified low temperatureproperties

CEN 5/5/2019

I.S. EN 10217-5:2019Welded steel tubes for pressure purposes - Technical delivery conditions - Part5: Submerged arc welded non-alloy and alloy steel tubes with specified elevatedtemperature properties

CEN 5/5/2019

I.S. EN 10217-6:2019Welded steel tubes for pressure purposes - Technical delivery conditions - Part6: Submerged arc welded non-alloy steel tubes with specified low temperatureproperties

CEN 5/5/2019

I.S. EN 10219-2:2019Cold formed welded steel structural hollow sections - Part 2: Tolerances,dimensions and sectional properties CEN 5/26/2019

I.S. EN 10225-1:2019Weldable structural steels for fixed offshore structures - Technical deliveryconditions - Part 1: Plates CEN 6/2/2019

I.S. EN 10225-2:2019Weldable structural steels for fixed offshore structures - Technical deliveryconditions - Part 2: Sections CEN 6/2/2019

I.S. EN 10225-3:2019Weldable structural steels for fixed offshore structures - Technical deliveryconditions - Part 3: Hot finished hollow sections CEN 6/2/2019

I.S. EN 10225-4:2019Weldable structural steels for fixed offshore structures - Technical deliveryconditions - Part 4: Cold formed welded hollow sections CEN 6/2/2019

I.S. EN 10272:2016 Stainless steel bars for pressure purposes CEN 7/31/2016

I.S. EN 10283:2019 Corrosion resistant steel castings CEN 4/14/2019

I.S. EN 12012-4:2019Plastics and rubber machines - Size reduction machines - Part 4: Safetyrequirements for agglomerators CEN 6/30/2019

I.S. EN 12102-2:2019Air conditioners, liquid chilling packages, heat pumps, process chillers anddehumidifiers with electrically driven compressors - Determination of the soundpower level - Part 2: Heat pump water heaters

CEN 6/2/2019

I.S. EN 12150-1:2015+A1:2019Glass in building - Thermally toughened soda lime silicate safety glass - Part 1:Definition and description CEN 5/26/2019

I.S. EN 12193:2018 Light and lighting - Sports lighting CEN 12/23/2018

I.S. EN 12259-9:2019Fixed firefighting systems - Components for sprinkler and water spray systems -Part 9: Deluge alarm valves CEN 5/12/2019

I.S. EN 12277:2015+A1:2018 Mountaineering equipment - Harnesses - Safety requirements and test methodsCEN 1/15/2019

I.S. EN 12285-3:2019Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin anddouble skin tanks for the underground storage of flammable and nonflammablewater polluting liquids for heating and cooling of buildings

CEN 4/21/2019

I.S. EN 12301:2019 Plastics and rubber machines - Calenders - Safety requirements CEN 12/30/2019

I.S. EN 12332-1:1999Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 1/22/1999

I.S. EN 12350-1:2019 Testing fresh concrete - Part 1: Sampling and common apparatus CEN 7/7/2019

I.S. EN 12350-2:2019 Testing fresh concrete - Part 2: Slump test CEN 7/7/2019

I.S. EN 12350-3:2019 Testing fresh concrete - Part 3: Vebe test CEN 7/7/2019

I.S. EN 12350-4:2019 Testing fresh concrete - Part 4: Degree of compactability CEN 7/7/2019

I.S. EN 12350-5:2019 Testing fresh concrete - Part 5: Flow table test CEN 7/7/2019

I.S. EN 12350-6:2019 Testing fresh concrete - Part 6: Density CEN 7/7/2019

I.S. EN 12350-7:2019 Testing fresh concrete - Part 7: Air content - Pressure methods CEN 7/7/2019

I.S. EN 12350-8:2019 Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test CEN 7/7/2019

I.S. EN 12390-2:2019Testing hardened concrete - Part 2: Making and curing specimens for strengthtests CEN 7/26/2019

I.S. EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens CEN 7/26/2019



Reference Title En Origin Body Publication D..I.S. EN 12390-2:2019Testing hardened concrete - Part 2: Making and curing specimens for strengthtests CEN 7/26/2019

I.S. EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens CEN 7/26/2019

I.S. EN 12390-4:2019Testing hardened concrete - Part 4: Compressive strength - Specification fortesting machines CEN 10/21/2019

I.S. EN 12390-5:2019 Testing hardened concrete - Part 5: Flexural strength of test specimens CEN 7/26/2019

I.S. EN 12390-7:2019 Testing hardened concrete - Part 7: Density of hardened concrete CEN 7/26/2019

I.S. EN 12390-8:2019Testing hardened concrete - Part 8: Depth of penetration of water underpressure CEN 7/26/2019

I.S. EN 12390-15:2019Testing hardened concrete - Part 15: Adiabatic method for the determination ofheat released by concrete during its hardening process CEN 8/18/2019

I.S. EN 12390-16:2019Testing hardened concrete - Part 16: Determination of the shrinkage ofconcrete CEN 10/21/2019

I.S. EN 12390-17:2019Testing hardened concrete - Part 17: Determination of creep of concrete incompression CEN 10/21/2019

I.S. EN 12407:2019 Natural stone test methods - Petrographic examination CEN 6/23/2019

I.S. EN 12413:2019 Safety requirements for bonded abrasive products CEN 11/10/2019

I.S. EN 12449:2016+A1:2019 Copper and copper alloys - Seamless, round tubes for general purposes CEN 10/27/2019

I.S. EN 12504-1:2019Testing concrete in structures - Part 1: Cored specimens - Taking, examiningand testing in compression CEN 7/26/2019

I.S. EN 12519:2018 Windows and pedestrian doors - Terminology CEN 9/10/2018

I.S. EN 12640:2019Intermodal loading units and commercial vehicles - Lashing points for cargosecuring - Minimum requirements and testing CEN 12/30/2019

I.S. EN 12641-1:2019Intermodal loading units and commercial vehicles - Tarpaulins - Part 1:Minimum requirements CEN 1/6/2020

I.S. EN 12641-2:2019Intermodal loading units and commercial vehicles - Tarpaulins - Part 2:Minimum requirements for curtainsiders CEN 12/30/2019

I.S. EN 12670:2019 Natural stone - Terminology CEN 6/30/2019

I.S. EN 12697-2:2015+A1:2019Bituminous mixtures - Test methods - Part 2: Determination of particle sizedistribution CEN 9/1/2019

I.S. EN 12697-31:2019Bituminous mixtures - Test methods - Part 31: Specimen preparation bygyratory compactor CEN 3/24/2019

I.S. EN 12697-32:2019Bituminous mixtures - Test methods - Part 32: Specimen preparation byvibratory compactor CEN 3/24/2019

I.S. EN 12697-33:2019Bituminous mixtures - Test method - Part 33: Specimen prepared by rollercompactor CEN 3/24/2019

I.S. EN 12697-44:2019Bituminous mixtures - Test methods - Part 44: Crack propagation bysemi-circular bending test CEN 3/24/2019

I.S. EN 12697-53:2019Bituminous mixtures - Test methods - Part 53: Cohesion increase byspreadability-meter method CEN 10/14/2019

I.S. EN 12697-54:2019Bituminous mixtures - Test methods - Part 54: Curing of specimen for test ofmixtures with bitumen emulsion CEN 10/14/2019

I.S. EN 12697-55:2019Bituminous mixtures - Test methods - Part 55: Organoleptic assessment ofmixtures with bitumen emulsion CEN 10/14/2019

I.S. EN 12697-56:2019Bituminous mixtures - Test methods - Part 56: Specimen preparation by staticcompaction CEN 10/14/2019

I.S. EN 12758:2019Glass in building - Glazing and airborne sound insulation - Product descriptions,determination of properties and extension rules CEN 9/22/2019

I.S. EN 12767:2019Passive safety of support structures for road equipment - Requirements and testmethods CEN 9/1/2019

I.S. EN 12807:2019LPG equipment and accessories - Transportable refillable brazed steel cylindersfor liquefied petroleum gas (LPG) - Design and construction CEN 7/28/2019

I.S. EN 12817:2019LPG Equipment and accessories - Inspection and requalification of LPG pressurevessels up to and including 13 mÂ³ CEN 3/31/2019

I.S. EN 12819:2019LPG equipment and accessories - Inspection and requalification of LPG pressurevessels greater than 13 mÂ³ CEN 3/31/2019

I.S. EN 12845:2015+A1:2019Fixed firefighting systems - Automatic sprinkler systems - Design, installationand maintenance CEN 1/6/2020

I.S. EN 12873-3:2019Influence of materials on water intended for human consumption - Influencedue to migration - Part 3: Test method for ion exchange and adsorbent resins CEN 3/3/2019

I.S. EN 12895:2015+A1:2019 Industrial trucks - Electromagnetic compatibility CEN 9/15/2019



Reference Title En Origin Body Publication D..I.S. EN 12873-3:2019Influence of materials on water intended for human consumption - Influencedue to migration - Part 3: Test method for ion exchange and adsorbent resins CEN 3/3/2019

I.S. EN 12895:2015+A1:2019 Industrial trucks - Electromagnetic compatibility CEN 9/15/2019

I.S. EN 12896-4:2019Public transport - Reference data model - Part 4: Operations monitoring andcontrol CEN 9/29/2019

I.S. EN 12896-5:2019 Public transport - Reference data model - Part 5: Fare management CEN 9/29/2019

I.S. EN 12896-6:2019 Public transport - Reference data model - Part 6: Passenger information CEN 9/29/2019

I.S. EN 12896-7:2019 Public transport - Reference data model - Part 7: Driver management CEN 9/29/2019

I.S. EN 12896-8:2019Public transport - Reference data model - Part 8 : Management information &statistics CEN 9/29/2019

I.S. EN 12898:2019 Glass in building - Determination of the emissivity CEN 3/31/2019

I.S. EN 12916:2019Petroleum products - Determination of aromatic hydrocarbon types in middledistillates - High performance liquid chromatography method with refractiveindex detection

CEN 6/2/2019

I.S. EN 12927:2019Safety requirements for cableway installations designed to carry persons -Ropes CEN 6/2/2019

I.S. EN 12944-3:2019Fertilizers and liming materials - Vocabulary - Part 3: Terms relating to limingmaterials CEN 6/2/2019

I.S. EN 12954:2019General principles of cathodic protection of buried or immersed onshore metallicstructures CEN 9/8/2019

I.S. EN 12965:2019Tractors and machinery for agriculture and forestry - Power take-off (PTO) driveshafts and their guards - Safety CEN 12/22/2019

I.S. EN 12976-2:2019Thermal solar systems and components - Factory made systems - Part 2: Testmethods CEN 4/14/2019

I.S. EN 13031-1:2019Greenhouses - Design and construction - Part 1: Commercial productiongreenhouses CEN 1/6/2020

I.S. EN 13032-4:2015+A1:2019Light and lighting - Measurement and presentation of photometric data of lampsand luminaires - Part 4: LED lamps, modules and luminaires CEN 7/26/2019

I.S. EN 13036-5:2019Road and airfield surface characteristics - Test methods - Part 5: Determinationof longitudinal unevenness indices CEN 9/22/2019

I.S. EN 13053:2019Ventilation for buildings - Air handling units - Rating and performance for units,components and sections CEN 12/30/2019

I.S. EN 13071-1:2019Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part1: General requirements CEN 7/28/2019

I.S. EN 13071-2:2019Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part2: Additional requirements for underground or partly underground systems CEN 7/28/2019

I.S. EN 13071-3:2019Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part3: Recommended lifting connections CEN 10/14/2019

I.S. EN 13074-1:2019Bitumen and bituminous binders - Recovery of binder from bituminous emulsionor cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation CEN 3/3/2019

I.S. EN 13074-2:2019Bitumen and bituminous binders - Recovery of binder from bituminous emulsionor cut-back or fluxed bituminous binders - Part 2: Stabilization after recovery byevaporation

CEN 3/3/2019

I.S. EN 13098:2019Workplace exposure - Measurement of airborne microorganisms and microbialcompounds - General requirements CEN 9/22/2019

I.S. EN 13100-2:2019Non-destructive testing of welded joints in thermoplastics semi- finishedproducts - Part 2: X-ray radiographic testing CEN 9/22/2019

I.S. EN 13108-31:2019Bituminous mixtures - Material specifications - Part 31: Asphalt Concrete withBituminous Emulsion CEN 10/14/2019

I.S. EN 13126-15:2019Building hardware - Hardware for windows and door height windows -Requirements and test methods - Part 15: Rollers for horizontal sliding andhardware for sliding folding windows

CEN 5/5/2019

I.S. EN 13126-16:2019Building hardware - Hardware for windows and door height windows -Requirements and test methods - Part 16: Hardware for Lift and Slide windows CEN 5/5/2019

I.S. EN 13126-17:2019Building hardware - Hardware for windows and door height windows -Requirements and test methods - Part 17: Hardware for Tilt and Slide windows CEN 5/5/2019

I.S. EN 13141-1:2019Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 1: Externally and internally mounted air transferdevices

CEN 2/17/2019

I.S. EN 13146-1:2019Railway applications - Track - Test methods for fastening systems - Part 1:Determination of longitudinal rail restraint CEN 2/17/2019

I.S. EN 13146-7:2019Railway applications - Track - Test methods for fastening systems - Part 7:Determination of clamping force and uplift stiffness CEN 2/17/2019

I.S. EN 13175:2019LPG Equipment and accessories - Specification and testing for LiquefiedPetroleum Gas (LPG) pressure vessel valves and fittings CEN 5/5/2019

I.S. EN 13200-1:2019 Spectator facilities - Part 1: General characteristics for spectator viewing area CEN 3/17/2019

I.S. EN 13216-1:2019 Chimneys - Test methods for system chimneys - Part 1: General test methods CEN 5/5/2019



Reference Title En Origin Body Publication D..I.S. EN 13200-1:2019 Spectator facilities - Part 1: General characteristics for spectator viewing area CEN 3/17/2019

I.S. EN 13216-1:2019 Chimneys - Test methods for system chimneys - Part 1: General test methods CEN 5/5/2019

I.S. EN 13236:2019 Safety requirements for superabrasive products CEN 5/12/2019

I.S. EN 13272-1:2019Railway applications - Electrical lighting for rolling stock in public transportsystems - Part 1: Heavy rail CEN 11/3/2019

I.S. EN 13272-2:2019Railway applications - Electrical lighting for rolling stock in public transportsystems - Part 2: Urban rail CEN 11/3/2019

I.S. EN 13274-2:2019Respiratory protective devices - Methods of test - Part 2: Practical performancetests CEN 9/1/2019

I.S. EN 13274-7:2019Respiratory protective devices - Methods of test - Part 7: Determination ofparticle filter penetration CEN 7/7/2019

I.S. EN 13358:2019Bitumen and bituminous binders - Determination of the distillationcharacteristics of cut-back and fluxed bituminous binders made with mineralfluxes

CEN 8/4/2019

I.S. EN 13374:2013+A1:2018 Temporary edge protection systems - Product specification - Test methods CEN 1/15/2019

I.S. EN 13375:2019Flexible sheets for waterproofing - Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles - Specimen preparation CEN 5/5/2019

I.S. EN 13381-7:2019Test methods for determining the contribution to the fire resistance of structuralmembers - Part 7: Applied protection to timber members CEN 7/7/2019

I.S. EN 13383-2:2019 Armourstone, Part 2: Test methods CEN 6/26/2019

I.S. EN 13384-1:2015+A1:2019Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneysserving one combustion appliance CEN 7/21/2019

I.S. EN 13384-2:2015+A1:2019Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneysserving more than one combustion appliance CEN 7/21/2019

I.S. EN 13422:2019Vertical road signs - Portable deformable warning devices and delineators -Portable road traffic signs - Cones and cylinders CEN 11/27/2019

I.S. EN 13445-3:2014/A6:2019 Unfired pressure vessels - Part 3: Design CEN 4/7/2019



I.S. EN 13445-5:2014/A1:2018 Unfired pressure vessels - Part 5: Inspection and testing CEN 9/5/2018

I.S. EN 13454-2:2019 Binders for floor screeds based on calcium sulphate - Part 2: Test methods CEN 2/10/2019

I.S. EN 13480-1:2017 Metallic industrial piping - Part 1: General CEN 7/16/2017

I.S. EN 13480-1:2017/A1:2019 Metallic industrial piping - Part 1: General CEN 5/8/2019

I.S. EN 13480-2:2017 Metallic industrial piping - Part 2: Materials CEN 7/16/2017

I.S. EN 13480-2:2017/A2:2018 Metallic industrial piping - Part 2: Materials CEN 11/15/2018

I.S. EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing CEN 7/16/2017

I.S. EN 13480-5:2017/A1:2019 Metallic industrial piping - Part 5: Inspection and testing CEN 4/12/2019

I.S. EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping CEN 7/16/2017

I.S. EN 13480-6:2017/A1:2019 Metallic industrial piping - Part 6: Additional requirements for buried piping CEN 5/9/2019

I.S. EN 13480-8:2017Metallic industrial piping - Part 8: Additional requirements for aluminium andaluminium alloy piping CEN 7/16/2017

I.S. EN 13487:2019Heat exchanger - Forced convection air cooled refrigerant condensers and drycoolers - Sound measurement CEN 8/25/2019

I.S. EN 13494:2019Thermal insulation products for building applications - Determination of thetensile bond strength of the adhesive and of the base coat to the thermalinsulation material

CEN 9/22/2019

I.S. EN 13495:2019Thermal insulation products for building applications - Determination of thepull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)

CEN 9/22/2019

I.S. EN 13523-11:2019Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbingtest) CEN 10/7/2019

I.S. EN 13523-17:2019 Coil coated metals - Test methods - Part 17: Adhesion of strippable films CEN 10/7/2019

I.S. EN 13523-19:2019 Coil coated metals - Test methods - Part 19: Panel design and method ofatmospheric exposure testing

CEN 10/7/2019



Reference Title En Origin Body Publication D..I.S. EN 13523-17:2019 Coil coated metals - Test methods - Part 17: Adhesion of strippable films CEN 10/7/2019

I.S. EN 13523-19:2019Coil coated metals - Test methods - Part 19: Panel design and method ofatmospheric exposure testing CEN 10/7/2019

I.S. EN 13565-1:2019Fixed firefighting systems - Foam systems - Part 1: Requirements and testmethods for components CEN 5/19/2019

I.S. EN 13565-2:2018+AC:2019Fixed firefighting systems - Foam systems - Part 2: Design, construction andmaintenance CEN 5/12/2019

I.S. EN 13611:2019Safety and control devices for burners and appliances burning gaseous and/orliquid fuels - General requirements CEN 4/14/2019

I.S. EN 13670:2009Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 6/19/2019

I.S. EN 13670:2009/NA:2015Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) NSAI 4/21/2015

I.S. EN 13674-2:2019Railway applications - Track - Rail - Part 2: Switch and crossing rails used inconjunction with Vignole railway rails 46 kg/m and above CEN 10/21/2019

I.S. EN 13674-4:2019Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/mto, but excluding 46 kg/m CEN 4/21/2019

I.S. EN 13697:2015+A1:2019Chemical disinfectants and antiseptics - Quantitative non-porous surface test forthe evaluation of bactericidal and/or fungicidal activity of chemical disinfectantsused in food, industrial, domestic and institutional areas - Test method and req..

CEN 8/18/2019

I.S. EN 13756:2018 Wood flooring and parquet - Terminology CEN 9/30/2018

I.S. EN 13757-4:2019 Communication systems for meters - Part 4: Wireless M-Bus communication CEN 5/23/2019

I.S. EN 13791:2019Assessment of in-situ compressive strength in structures and precast concretecomponents CEN 9/8/2019

I.S. EN 13795-1:2019Surgical clothing and drapes - Requirements and test methods - Part 1: Surgicaldrapes and gowns CEN 4/21/2019

I.S. EN 13795-2:2019Surgical clothing and drapes - Requirements and test methods - Part 2: Cleanair suits CEN 4/21/2019

I.S. EN 13814-1:2019Safety of amusement rides and amusement devices - Part 1: Design andmanufacture CEN 6/16/2019

I.S. EN 13814-2:2019Safety of amusement rides and amusement devices - Part 2: Operation,maintenance and use CEN 6/16/2019

I.S. EN 13814-3:2019Safety of amusement rides and amusement devices - Part 3: Requirements forinspection during design, manufacture, operation and use CEN 6/16/2019

I.S. EN 13848-1:2019Railway applications - Track - Track geometry quality - Part 1: Characterizationof track geometry CEN 4/14/2019

I.S. EN 13878:2019 Leisure accommodation vehicles - Terms and definitions CEN 9/29/2019

I.S. EN 13880-6:2019Hot applied joint sealants - Part 6: Method for the preparation of samples fortesting CEN 4/28/2019

I.S. EN 13880-7:2019 Hot applied joint sealants - Part 7: Function testing of joint sealants CEN 4/28/2019

I.S. EN 13941-1:2019District heating pipes - Design and installation of thermal insulated bondedsingle and twin pipe systems for directly buried hot water networks - Part 1:Design

CEN 5/5/2019

I.S. EN 13941-2:2019District heating pipes - Design and installation of thermal insulated bondedsingle and twin pipe systems for directly buried hot water networks - Part 2:Installation

CEN 5/5/2019

I.S. EN 14012:2019 Postal services - Quality of service - Complaints handling principles CEN 10/7/2019

I.S. EN 14033-4:2019Railway applications - Track - Railbound construction and maintenancemachines - Part 4: Technical requirements for running, travelling and workingon urban rail

CEN 2/17/2019

I.S. EN 14071:2015+A1:2019LPG equipment and accessories - Pressure relief valves for LPG pressure vessels- Ancillary equipment CEN 5/19/2019

I.S. EN 14081-1:2016+A1:2019Timber structures - Strength graded structural timber with rectangular crosssection - Part 1: General requirements CEN 9/1/2019

I.S. EN 14110:2019Fat and oil derivatives - Fatty Acid Methyl Esters - Determination of methanolcontent CEN 4/28/2019

I.S. EN 14134:2019Ventilation for buildings - Performance measurement and checks for residentialventilation systems CEN 3/17/2019

I.S. EN 14150:2019 Geosynthetic barriers - Determination of permeability to liquids CEN 6/30/2019

I.S. EN 14175-3:2019 Fume cupboards - Part 3: Type test methods CEN 5/19/2019

I.S. EN 14187-5:2019Cold applied joint sealants - Test methods - Part 5: Determination of theresistance to hydrolysis CEN 4/7/2019

I.S. EN 14187-7:2019Cold applied joint sealants - Test methods - Part 7: Determination of theresistance to flame CEN 4/7/2019

I.S. EN 14187-9:2019 Cold applied joint sealants - Test methods - Part 9: Function testing of jointsealants

CEN 4/7/2019



Reference Title En Origin Body Publication D..I.S. EN 14187-7:2019Cold applied joint sealants - Test methods - Part 7: Determination of theresistance to flame CEN 4/7/2019

I.S. EN 14187-9:2019Cold applied joint sealants - Test methods - Part 9: Function testing of jointsealants CEN 4/7/2019

I.S. EN 14214:2012+A2:2019Liquid petroleum products - Fatty acid methyl esters (FAME) for use in dieselengines and heating applications - Requirements and test methods CEN 3/10/2019

I.S. EN 14243-1:2019Materials obtained from end of life tyres - Part 1: General definitions related tothe methods for determining their dimension(s) and impurities CEN 3/3/2019

I.S. EN 14243-2:2019Materials obtained from end of life tyres - Part 2: Granulates and powders -Methods for determining the particle size distribution and impurities, includingfree steel and free textile content

CEN 3/3/2019

I.S. EN 14243-3:2019Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips -Methods for determining their dimension(s) including protruding filamentsdimensions

CEN 3/3/2019

I.S. EN 14257:2019Adhesives - Wood adhesives - Determination of tensile strength of lap joints atelevated temperature (WATT '91) CEN 10/14/2019

I.S. EN 14366:2004+A1:2019 Laboratory measurement of noise from waste water installations CEN 11/22/2019

I.S. EN 14382:2019 Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar) CEN 9/8/2019

I.S. EN 14419:2019District heating pipes - Bonded single and twin pipe systems for buried hotwater networks - Surveillance systems CEN 11/3/2019

I.S. EN 14423:2013+A2:2019Clamp type coupling assemblies for use with steam hoses rated for pressures upto 18 bar CEN 5/26/2019

I.S. EN 14476:2013+A2:2019Chemical disinfectants and antiseptics - Quantitative suspension test for theevaluation of virucidal activity in the medical area - Test method andrequirements (Phase 2/Step 1)

CEN 8/4/2019

I.S. EN 14492-2:2019 Cranes - Power driven winches and hoists - Part 2: Power driven hoists CEN 6/30/2019

I.S. EN 14504:2019Inland navigation vessels - Floating landing stages and floating bridges oninland waters - Requirements, tests CEN 4/21/2019

I.S. EN 14535-1:2019Railway applications - Brake discs for railway rolling stock - Part 1: Brake discspressed or shrunk onto the axle or drive shaft, dimensions and qualityrequirements

CEN 3/24/2019

I.S. EN 14535-2:2019Railway applications - Brake discs for railway rolling stock - Part 2: Brake discsmounted onto the wheel, dimensions and quality requirements CEN 3/24/2019

I.S. EN 14564:2019 Tanks for transport of dangerous goods - Terminology CEN 8/25/2019

I.S. EN 14565:2019Resilient floor coverings - Floor coverings based upon synthetic thermoplasticpolymers - Specification CEN 9/15/2019

I.S. EN 14619:2019 Roller sports equipment - Kick scooters - Safety requirements and test methods CEN 8/11/2019

I.S. EN 14683:2019 Medical face masks - Requirements and test methods CEN 4/14/2019

I.S. EN 14683:2019+AC:2019 Medical face masks - Requirements and test methods CEN 8/25/2019

I.S. EN 14702-3:2019Characterisation of sludges - Settling properties - Part 3: Determination of zonesettling velocity (ZSV) CEN 3/10/2019

I.S. EN 14726:2019Aluminium and aluminium alloys - Determination of the chemical composition ofaluminium and aluminium alloys by spark optical emission spectrometry CEN 3/31/2019

I.S. EN 14728:2019 Imperfections in thermoplastic welds - Classification CEN 3/10/2019

I.S. EN 14752:2019 Railway applications - Bodyside entrance systems for rolling stock CEN 12/2/2019

I.S. EN 14811:2019Railway applications - Track - Special purpose rail - Grooved rails and associatedconstruction profiles CEN 4/7/2019

I.S. EN 14901-1:2014+A1:2019Ductile iron pipes, fittings and accessories - Requirements and test methods fororganic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating(heavy duty)

CEN 12/1/2019

I.S. EN 14901-2:2019Ductile iron pipes, fittings and accessories - Requirements and test methods fororganic coatings of ductile iron fittings and accessories - Part 2: Thermoplasticacid modified polyolefin coating (TMPO)

CEN 11/27/2019

I.S. EN 14908-7:2019Open communication in building automation, controls and building management- Control Network Protocol - Part 7: Communication via internet protocols CEN 12/22/2019

I.S. EN 14960-2:2019Inflatable play equipment - Part 2: Additional safety requirements for inflatablebouncing pillows intended for permanent installation CEN 10/14/2019

I.S. EN 14972-16:2019Fixed firefighting systems - Water mist systems - Part 16: Test protocol forindustrial oil cookers for open nozzle systems CEN 9/15/2019

I.S. EN 14974:2019 Skateparks - Safety requirements and test methods CEN 5/19/2019

I.S. EN 15004-1:2019Fixed firefighting systems - Gas extinguishing systems - Part 1: Design,installation and maintenance (ISO 14520-1:2015, modified) CEN 4/14/2019

I.S. EN 15017:2019 Funeral Services - Requirements CEN 9/29/2019

I.S. EN 15101-1:2013+A1:2019 Thermal insulation products for buildings - In-situ formed loose fill cellulose(LFCI) products - Part 1: Specification for the products before installation

CEN 5/12/2019



Reference Title En Origin Body Publication D..I.S. EN 15017:2019 Funeral Services - Requirements CEN 9/29/2019

I.S. EN 15101-1:2013+A1:2019Thermal insulation products for buildings - In-situ formed loose fill cellulose(LFCI) products - Part 1: Specification for the products before installation CEN 5/12/2019

I.S. EN 15102:2019 Decorative wallcoverings - Roll form CEN 6/30/2019

I.S. EN 15152:2019 Railway applications - Windscreens for trains CEN 9/1/2019

I.S. EN 15154-5:2019Emergency safety showers - Part 5: Water overhead body showers for sitesother than laboratories CEN 11/3/2019

I.S. EN 15154-6:2019Emergency safety showers - Part 6: Plumbed-in multiple nozzle body showersfor sites other than laboratories CEN 9/22/2019

I.S. EN 15182-1:2019Portable equipment for projecting extinguishing agents supplied by firefightingpumps - Hand-held branchpipes for fire service use - Part 1: Commonrequirements

CEN 10/7/2019

I.S. EN 15182-2:2019Portable equipment for projecting extinguishing agents supplied by firefightingpumps - Hand-held branchpipes for fire service use - Part 2: Combinationbranchpipes PN 16

CEN 10/7/2019

I.S. EN 15182-3:2019Portable equipment for projecting extinguishing agents supplied by firefightingpumps - Hand-held branchpipes for fire service use - Part 3: Smooth bore jetand/or one fixed spray jet angle branchpipes PN 16

CEN 9/1/2019

I.S. EN 15182-4:2019Portable equipment for projecting extinguishing agents supplied by firefightingpumps - Hand-held branchpipes for fire service use - Part 4: High pressurebranchpipes PN 40

CEN 9/1/2019

I.S. EN 15202:2019LPG equipment and accessories - Essential operational dimensions for LPGcylinder valve outlet and associated equipment connections CEN 12/30/2019

I.S. EN 15254-3:2019Extended application of results from fire resistance tests - Non-loadbearing walls- Part 3: Lightweight partitions CEN 9/8/2019

I.S. EN 15269-1:2019Extended application of test results for fire resistance and/or smoke control fordoor, shutter and openable window assemblies, including their elements ofbuilding hardware - Part 1: General requirements

CEN 6/30/2019


I.S. EN 15276-1:2019Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1:Requirements and test methods for components CEN 4/21/2019

I.S. EN 15276-2:2019Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2:Design, installation and maintenance CEN 4/14/2019

I.S. EN 15329:2019 Railway applications - Braking - Brake block holder and brake block key CEN 4/7/2019

I.S. EN 15332:2019 Heating boilers - Energy assessment of hot water storage tanks CEN 11/10/2019

I.S. EN 15341:2019 Maintenance - Maintenance Key Performance Indicators CEN 9/15/2019

I.S. EN 15355:2019Railway applications - Braking - Distributor valves and distributor-isolatingdevices CEN 6/2/2019

I.S. EN 15416-3:2017+A1:2019Adhesives for load bearing timber structures other than phenolic andaminoplastic - Test methods - Part 3: Creep deformation test at cyclic climateconditions with specimens loaded in bending shear

CEN 4/14/2019

I.S. EN 15493:2019 Candles - Specification for fire safety CEN 11/10/2019

I.S. EN 15494:2019 Candles - Product safety labels CEN 11/24/2019

I.S. EN 15597-2:2019Winter maintenance equipment - Spreading and spraying machines - Part 2:Requirements for distribution and their test CEN 12/22/2019

I.S. EN 15610:2019Railway applications - Acoustics - Rail and wheel roughness measurementrelated to noise generation CEN 5/19/2019

I.S. EN 15633-1:2019Foodstuffs - Detection of food allergens by immunological methods - Part 1:General considerations CEN 10/21/2019

I.S. EN 15634-1:2019Foodstuffs - Detection of food allergens by molecular biological methods - Part1: General considerations CEN 10/21/2019

I.S. EN 15634-2:2019Foodstuffs - Detection of food allergens by molecular biological methods - Part2: Celery (Apium graveolens) - Detection of a specific DNA sequence in cookedsausages by real-time PCR

CEN 10/21/2019

I.S. EN 15654-2:2019Railway applications - Measurement of vertical forces on wheels and wheelsets -Part 2: Test in workshop for new, modified and maintained vehicles CEN 4/28/2019

I.S. EN 15659:2019Secure storage units - Classification and methods of test for resistance to fire -Light fire storage units CEN 8/25/2019

I.S. EN 15698-1:2019District heating pipes - Bonded twin pipe systems for directly buried hot waternetworks - Part 1: Factory made twin pipe assembly of steel service pipes,polyurethane thermal insulation and one casing of polyethylene

CEN 11/3/2019

I.S. EN 15698-2:2019District heating pipes - Bonded twin pipe systems for directly buried hot waternetworks - Part 2: Factory made fitting and valve assemblies of steel servicepipes, polyurethane thermal insulation and one casing of polyethylene

CEN 11/3/2019

I.S. EN 15804:2012+A2:2019Sustainability of construction works - Environmental product declarations - Corerules for the product category of construction products CEN 11/22/2019

I.S. EN 15842:2019Foodstuffs - Detection of food allergens - General considerations and validationof methods CEN 10/21/2019

I.S. EN 15869-1:2019 Inland navigation vessels - Electrical shore connection, three phase current 400V, 50 Hz, up to 125 A - Part 1: General requirements

CEN 6/30/2019



Reference Title En Origin Body Publication D..I.S. EN 15842:2019Foodstuffs - Detection of food allergens - General considerations and validationof methods CEN 10/21/2019

I.S. EN 15869-1:2019Inland navigation vessels - Electrical shore connection, three phase current 400V, 50 Hz, up to 125 A - Part 1: General requirements CEN 6/30/2019

I.S. EN 15869-2:2019Inland navigation vessels - Electrical shore connection, three phase current 400V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements CEN 6/30/2019

I.S. EN 15869-3:2019Inland navigation vessels - Electrical shore connection, three phase current 400V, 50 Hz, up to 125 A - Part 3: On-board unit, additional requirements CEN 6/30/2019

I.S. EN 15898:2019 Conservation of cultural heritage - Main general terms and definitions CEN 12/8/2019

I.S. EN 15939:2019Hardware for furniture - Strength and loading capacity of wall attachmentdevices CEN 6/30/2019

I.S. EN 15940:2016+A1:2018+AC:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 3/31/2019

I.S. EN 16074:2019Paints and varnishes - Determination of non-volatile-matter content andspreading rate of coil coating materials CEN 10/7/2019

I.S. EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound CEN 12/8/2019

I.S. EN 16125:2019LPG Equipment and Accessories - Pipework systems and supports - LPG in liquidphase and vapour pressure phase CEN 10/14/2019

I.S. EN 16140:2019Natural stone test methods - Determination of sensitivity to changes inappearance produced by thermal cycles CEN 2/3/2019

I.S. EN 16157-2:2019Intelligent transport systems - DATEX II data exchange specifications for trafficmanagement and information - Part 2: Location referencing CEN 3/24/2019

I.S. EN 16167:2018+AC:2019Soil, treated biowaste and sludge - Determination of polychlorinated biphenyls(PCB) by gas chromatography with mass selective detection (GC-MS) and gaschromatography with electron-capture detection (GC-ECD)

CEN 2/17/2019

I.S. EN 16185-2:2014+A1:2019Railway applications - Braking systems of multiple unit trains - Part 2: Testmethods CEN 12/1/2019

I.S. EN 16186-4:2019 Railway applications - Driver's cab - Part 4: Layout and access CEN 6/9/2019

I.S. EN 16190:2018Soil, treated biowaste and sludge - Determination of dioxins and furans anddioxin-like polychlorinated biphenyls by gas chromatography with highresolution mass selective detection (HR GC-MS)

CEN 1/15/2019

I.S. EN 16207:2014+A1:2019Railway applications - Braking - Functional and performance criteria of MagneticTrack Brake systems for use in railway rolling stock CEN 12/1/2019

I.S. EN 16214-1:2012+A1:2019Sustainability criteria for the production of biofuels and bioliquids for energyapplications - Principles, criteria, indicators and verifiers - Part 1: Terminology CEN 12/16/2019

I.S. EN 16214-4:2013+A1:2019Sustainability criteria for the production of biofuels and bioliquids for energyapplications - Principles, criteria, indicators and verifiers - Part 4: Calculationmethods of the greenhouse gas emission balance using a life cycle analysis ap..

CEN 12/1/2019

I.S. EN 16234-1:2019e-Competence Framework (e-CF) - A common European Framework for ICTProfessionals in all sectors - Part 1: Framework CEN 1/6/2020

I.S. EN 16402:2019Paints and varnishes - Assessment of emissions of substances from coatingsinto indoor air - Sampling, conditioning and testing CEN 3/17/2019


I.S. EN 16437:2014+A1:2019Chemical disinfectants and antiseptics - Quantitative surface test for theevaluation of bactericidal activity of chemical disinfectants and antiseptics usedin veterinary area on porous surfaces without mechanical action - Test method..

CEN 11/3/2019

I.S. EN 16452:2015+A1:2019 Railway applications - Braking - Brake blocks CEN 3/24/2019

I.S. EN 16495:2019Air Traffic Management - Information security for organisations supporting civilaviation operations CEN 7/21/2019

I.S. EN 16511:2014+A1:2019Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panelswith wear resistant top layer CEN 5/5/2019

I.S. EN 16579:2018+AC:2019Playing field equipment - Portable and permanent socketed goals - Functional,safety requirements and test methods CEN 8/25/2019

I.S. EN 16601-00:2019Space system - EN 16600 series - Description, implementation and generalrequirements CEN 2/3/2019

I.S. EN 16602-70-26:2019 Space product assurance - Crimping of high-reliability electrical connections CEN 3/31/2019

I.S. EN 16602-70-38:2019Space product assurance - High-reliability soldering for surface-mount andmixed technology CEN 5/7/2019

I.S. EN 16602-70-54:2019 Space product assurance - Ultracleaning of flight hardware CEN 3/31/2019

I.S. EN 16602-70-60:2019Space product assurance - Qualification and Procurement of printed circuitboards CEN 7/28/2019

I.S. EN 16603-11:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 12/18/2019

I.S. EN 16603-20-20:2018Space engineering - Electrical design and interface requirements for powersupply CEN 9/2/2018

I.S. EN 16603-31-04:2019 Space engineering - Exchange of thermal analysis data CEN 3/31/2019



Reference Title En Origin Body Publication D..I.S. EN 16603-20-20:2018Space engineering - Electrical design and interface requirements for powersupply CEN 9/2/2018

I.S. EN 16603-31-04:2019 Space engineering - Exchange of thermal analysis data CEN 3/31/2019

I.S. EN 16603-33-01:2019 Space engineering - Mechanisms CEN 5/7/2019

I.S. EN 16603-33-11:2019 Space engineering - Explosive subsystems and devices CEN 5/7/2019

I.S. EN 16604-10:2019Space sustainability - Space debris mitigation requirements (ISO 24113:2011,modified) CEN 7/26/2019

I.S. EN 16612:2019Glass in building - Determination of the lateral load resistance of glass panes bycalculation CEN 11/3/2019

I.S. EN 16613:2019Glass in building - Laminated glass and laminated safety glass - Determinationof interlayer viscoelastic properties CEN 11/3/2019

I.S. EN 16640:2017Bio-based products - Bio-based carbon content - Determination of the bio-basedcarbon content using the radiocarbon method CEN 3/24/2017

I.S. EN 16641:2019 Textile floor coverings - Guidelines for acceptable colour deviations CEN 11/22/2019

I.S. EN 16652-2:2019LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2:Personnel competence and training CEN 7/7/2019

I.S. EN 16711-3:2019Textiles - Determination of metal content - Part 3: Determination of lead releaseby artificial saliva solution CEN 6/2/2019

I.S. EN 16796-4:2019Energy efficiency of Industrial trucks - Test methods - Part 4: Variable-reachrough-terrain trucks CEN 4/14/2019

I.S. EN 16815:2019 CleANopen - Application profile for municipal vehicles CEN 4/14/2019

I.S. EN 16834:2019 Railway applications - Braking - Brake performance CEN 5/5/2019

I.S. EN 16838:2019Refrigerated display scooping cabinets and pozzetto for gelato - Classification,requirements, performance and energy consumption testing CEN 7/21/2019

I.S. EN 16842-4:2019Powered industrial trucks- Visibility - Test methods and verification - Part 4 :Industrial variable reach trucks up to and including 10 000 kg capacity CEN 3/24/2019

I.S. EN 16842-9:2019Powered industrial trucks - Visibility - Test methods and verification - Part 9:Order-picking, lateral- and front-stacking trucks with elevating operator position CEN 3/3/2019

I.S. EN 16844:2017+A2:2019 Aesthetic medicine services - Non-surgical medical treatments CEN 8/25/2019

I.S. EN 16860:2019Railway applications - Requirements and general principles for securing payloadin rail freight transport CEN 4/7/2019

I.S. EN 16868:2019Ambient air - Sampling and analysis of airborne pollen grains and fungal sporesfor networks related to allergy - Volumetric Hirst method CEN 5/26/2019

I.S. EN 16922:2017+A1:2019Railway applications - Ground based services - Vehicle waste water dischargeequipment CEN 7/7/2019

I.S. EN 16931-1:2017+A1:2019Electronic invoicing - Part 1: Semantic data model of the core elements of anelectronic invoice CEN 12/1/2019

I.S. EN 17009:2019Flooring of lignified materials other than wood - Characteristics, assessment andverification of constancy of performance and marking CEN 3/31/2019

I.S. EN 17018:2019 Railway applications - Rolling stock maintenance - Terms and definitions CEN 3/17/2019

I.S. EN 17032:2018/A1:2019Blast chillers and freezers cabinets for professional use - Classification,requirements and test conditions CEN 4/28/2019

I.S. EN 17038-1:2019Pumps - Methods of qualification and verification of the Energy Efficiency Indexfor rotodynamic pump units - Part 1: General requirements and procedures fortesting and calculation of Energy Efficiency Index (EEI)

CEN 5/26/2019

I.S. EN 17038-2:2019Pumps - Methods of qualification and verification of the Energy Efficiency Indexfor rotodynamic pump units - Part 2: Testing and calculation of EnergyEfficiency Index (EEI) of single pump units

CEN 5/26/2019

I.S. EN 17054:2019Biometrics multilingual vocabulary based upon the English version of ISO/IEC2382-37:2012 CEN 6/2/2019

I.S. EN 17064:2018Safety requirements for cableway installations designed to carry persons -Prevention and fight against fire CEN 3/1/2019

I.S. EN 17066-1:2019Insulated means of transport for temperature sensitive goods - Requirementsand testing - Part 1: Container CEN 8/11/2019

I.S. EN 17069-1:2019Railway applications - Systems and procedures for change of track gauge - Part1: Automatic Variable Gauge Systems CEN 4/28/2019

I.S. EN 17071:2019Information technology - Automatic identification and data capture techniques -Electronic identification plate CEN 3/17/2019

I.S. EN 17074:2019Glass in building - Environmental product declaration - Product category rulesfor flat glass products CEN 11/10/2019

I.S. EN 17082:2019Domestic and non-domestic gas-fired forced convection air heaters for spaceheating not exceeding a net heat input of 300 kW CEN 11/3/2019

I.S. EN 17085:2019 Paper and board - Sampling procedures for paper and board for recycling CEN 6/9/2019



Reference Title En Origin Body Publication D..I.S. EN 17082:2019Domestic and non-domestic gas-fired forced convection air heaters for spaceheating not exceeding a net heat input of 300 kW CEN 11/3/2019

I.S. EN 17085:2019 Paper and board - Sampling procedures for paper and board for recycling CEN 6/9/2019

I.S. EN 17087:2019Construction products: Assessment of release of dangerous substances -Preparation of test portions from the laboratory sample for testing of releaseand analysis of content

CEN 3/3/2019

I.S. EN 17095:2019 Railway applications - Rolling stock maintenance - Maintenance records CEN 3/24/2019

I.S. EN 17116-3:2019Specifications for industrial laundry machines - Definitions and testing ofcapacity and consumption characteristics - Part 3: Continuous tunnel washer CEN 7/21/2019

I.S. EN 17116-4:2019Specifications for industrial laundry machines - Definitions and testing ofcapacity and consumption characteristics - Part 4: Washer-extractors CEN 7/21/2019

I.S. EN 17120:2019Photocatalysis - Water purification - Performance of photocatalytic materials bymeasurement of phenol degradation CEN 3/10/2019

I.S. EN 17121:2019Conservation of cultural heritage - Historic timber structures - Guidelines for theon-site assessment of load-bearing timber structures CEN 10/14/2019

I.S. EN 17122:2019Chemical disinfectants and antiseptics - Quantitative non-porous surface test forthe evaluation of virucidal activity of chemical disinfectants and antiseptics usedin the veterinary area - Test method and requirements - Phase2, step2

CEN 12/16/2019

I.S. EN 17130:2019Textiles and textile products - Determination of dimethylfumarate (DMFu),method using gas chromatography CEN 7/28/2019

I.S. EN 17131:2019Textiles and textile products - Determination of dimethylformamide (DMF),method using gas chromatography CEN 7/28/2019

I.S. EN 17132:2019Textiles and textile products - Determination of Polycyclic AromaticHydrocarbons (PAH), method using gas chromatography CEN 8/11/2019

I.S. EN 17134:2019Textiles and textile products - Determination of certain preservatives, methodusing liquid chromatography CEN 8/11/2019

I.S. EN 17136:2019Water quality - Guidance on field and laboratory procedures for quantitativeanalysis and identification of macroinvertebrates from inland surface waters CEN 3/17/2019

I.S. EN 17150:2019Plastics piping systems for non-pressure underground conveyance and storageof non-potable water - Test method for determination of short-termcompression strength of boxes

CEN 9/8/2019

I.S. EN 17151:2019Plastics piping systems for non-pressure underground conveyance and storageof non-potable water - Test method for determination of long-term compressionstrength of boxes

CEN 9/8/2019

I.S. EN 17152-1:2019Plastics piping systems for non-pressure underground conveyance and storageof non-potable water - Boxes used for infiltration, attenuation and storagesystems - Part 1: Specifications for storm water boxes made of PP and PVC-U

CEN 9/8/2019

I.S. EN 17160:2019 Product category rules for ceramic tiles CEN 3/17/2019

I.S. EN 17161:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CEN 3/26/2019

CENELEC 3/26/2019

I.S. EN 17163:2019Pulp, paper and board - Determination of primary aromatic amines (PAA) in awater extract by a LC-MS method CEN 3/3/2019

I.S. EN 17175:2019Gas-fired overhead radiant strip heaters and multi-burner continuous radianttube heater systems for non-domestic use - Safety and energy efficiency CEN 10/27/2019

I.S. EN 17176-1:2019Plastics piping systems for water supply and for buried and above grounddrainage, sewerage and irrigation under pressure - Oriented unplasticizedpoly(vinyl chloride) (PVC-O) - Part 1: General

CEN 5/5/2019

I.S. EN 17176-2:2019Plastics piping systems for water supply and for buried and above grounddrainage, sewerage and irrigation under pressure - Oriented unplasticizedpoly(vinyl chloride) (PVC-O) - Part 2: Pipes

CEN 5/5/2019

I.S. EN 17176-5:2019Plastics piping systems for water supply and for buried and above grounddrainage, sewerage and irrigation under pressure - Oriented unplasticizedpoly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system

CEN 5/5/2019

I.S. EN 17177:2019 Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap CEN 2/17/2019

I.S. EN 17178:2019Liquid petroleum products - Determination of the total volatile sulfur content inliquefied petroleum gases by ultraviolet fluorescence spectroscopy CEN 10/7/2019

I.S. EN 17181:2019Lubricants - Determination of aerobic biological degradation of fully formulatedlubricants in an aqueous solution - Test method based on CO2-production CEN 3/10/2019

I.S. EN 17186:2019Identification of vehicles and infrastructures compatibility - Graphical expressionfor consumer information on EV power supply CEN 4/7/2019

I.S. EN 17194:2019Animal feeding stuffs: Methods of sampling and analysis - Determination ofDeoxynivalenol, Aflatoxin B1, Fumonisin B1 & B2, T-2 & HT-2 toxins,Zearalenone and Ochratoxin A in feed materials and compound feed by LC-MS..

CEN 11/24/2019

I.S. EN 17199-1:2019Workplace exposure - Measurement of dustiness of bulk materials that containor release respirable NOAA and other respirable particles - Part 1: Requirementsand choice of test methods

CEN 4/14/2019

I.S. EN 17199-2:2019Workplace exposure - Measurement of dustiness of bulk materials that containor release respirable NOAA or other respirable particles - Part 2: Rotating drummethod

CEN 4/14/2019

I.S. EN 17199-3:2019Workplace exposure - Measurement of dustiness of bulk materials that containor release respirable NOAA or other respirable particles - Part 3: Continuousdrop method

CEN 4/14/2019

I.S. EN 17199-4:2019Workplace exposure - Measurement of dustiness of bulk materials that containor release respirable NOAA or other respirable particles - Part 4: Small rotatingdrum method

CEN 4/14/2019

I.S. EN 17199-5:2019 Workplace exposure - Measurement of dustiness of bulk materials that containor release respirable NOAA or other respirable particles - Part 5: Vortex shakermethod

CEN 4/14/2019



Reference Title En Origin Body Publication D..I.S. EN 17199-4:2019

Workplace exposure - Measurement of dustiness of bulk materials that containor release respirable NOAA or other respirable particles - Part 4: Small rotatingdrum method CEN 4/14/2019

I.S. EN 17199-5:2019Workplace exposure - Measurement of dustiness of bulk materials that containor release respirable NOAA or other respirable particles - Part 5: Vortex shakermethod

CEN 4/14/2019

I.S. EN 17204:2019Water quality - Guidance on analysis of mesozooplankton from marine andbrackish waters CEN 4/21/2019

I.S. EN 17211:2019Water quality - Guidance on mapping of seagrasses and macroalgae in theeulittoral zone CEN 9/29/2019

I.S. EN 17212:2019Animal Feeding stuffs - Methods of sampling and analysis - Determination ofmelamine and cyanuric acid content by liquid chromatographic method withmass spectrometric detection (LC-MS/MS)

CEN 9/22/2019

I.S. EN 17214:2019 Visual assessment of furniture surfaces CEN 8/18/2019

I.S. EN 17215:2019Chemicals used for treatment of water intended for human consumption -Iron-based coagulants - Analytical methods CEN 4/7/2019

I.S. EN 17218:2019Water quality - Guidance on sampling of mesozooplankton from marine andbrackish water using mesh CEN 5/26/2019

I.S. EN 17220:2019 Packaging - Flexible aluminium tubes - Tube nozzles CEN 9/8/2019

I.S. EN 17224:2019Determination of compressive shear strength of wood adhesives at elevatedtemperatures CEN 7/28/2019

I.S. EN 17226:2019Beauty Salon Services - Requirements and recommendations for the provisionof service CEN 7/21/2019

I.S. EN 17228:2019Plastics - Bio-based polymers, plastics, and plastics products - Terminology,characteristics and communication CEN 3/31/2019

I.S. EN 17229:2019Fitness centres - Requirements for centre amenities and operation - Operationaland managerial requirements CEN 6/30/2019

I.S. EN 17246:2019Fertilizers - Determination of perchlorate in mineral fertilizers by ionchromatography and conductivity detection (IC-CD) CEN 9/8/2019

I.S. EN 17248:2019 District heating and district cooling pipe systems - Terms and definitions CEN 11/3/2019

I.S. EN 17254:2019Foodstuffs - Minimum performance requirements for determination of gluten byELISA CEN 10/21/2019

I.S. EN 17255-1:2019Stationary source emissions - Data acquisition and handling systems - Part 1:Specification of requirements for the handling and reporting of data CEN 8/18/2019

I.S. EN 17256:2019Animal feeding stuffs: Methods of sampling and analysis - Determination ofergot alkaloids and tropane alkaloids in feed materials and compound feeds byLC-MS/MS

CEN 10/27/2019

I.S. EN 17263:2019Copper and copper alloys - Eddy current testing on the outer surface of rods,bars, hollow rods and wires for the detection of defects by encircling test coil CEN 7/21/2019

I.S. EN 17264:2019Foodstuffs - Determination of elements and their chemical species -Determination of aluminium by inductively coupled plasma mass spectrometry(ICP-MS)

CEN 9/29/2019

I.S. EN 17265:2019Foodstuffs - Determination of elements and their chemical species -Determination of aluminium by inductively coupled plasma optical emissionspectometry (ICP-OES)

CEN 9/29/2019

I.S. EN 17266:2019Foodstuffs - Determination elements and their chemical species - Determinationof organomercury in seafood by elemental mercury analysis CEN 11/24/2019


I.S. EN 17269:2019 Health informatics - The International Patient Summary CEN 12/16/2019

I.S. EN 17270:2019Animal feeding stuffs: Methods of sampling and analysis - Determination oftheobromine in feed materials and compound feed, including cocoa derivedingredients, by liquid chromatography

CEN 11/10/2019

I.S. EN 17271:2019Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peelstrength of profiles laminated with foils CEN 7/26/2019

I.S. EN 17277:2019Hydrometry - Measurement requirements and classification of rainfall intensitymeasuring instruments CEN 11/3/2019

I.S. EN 17279:2019Foodstuffs - Multimethod for the screening of aflatoxin B1, deoxynivalenol,fumonisin B1 and B2, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone infoodstuffs, excluding foods for infants and young children, by LC-MS/MS

CEN 10/27/2019

I.S. EN 17280:2019Foodstuffs - Determination of zearalenone and trichothecenes includingdeoxynivalenol and its acetylated derivatives (3-acetyl-deoxynivalenol and15-acetyl-deoxynivalenol), nivalenol T-2 toxin and HT-2 toxin in cereals and ce..

CEN 10/27/2019

I.S. EN 17294:2019Animal feeding stuffs - Methods of sampling and analysis - Determination oforganic acids by Ion Chromatography with Conductivity Detection (IC-CD) CEN 8/25/2019

I.S. EN 17298:2019Animal feeding stuffs - Methods of sampling and analysis - Determination ofbenzoic and sorbic acid by High Performance Liquid Chromatography (HPLC) CEN 8/25/2019

I.S. EN 17299:2019Animal feeding stuffs: Methods of sampling and analysis - Screening anddetermination of authorized coccidiostats at additive and 1 % and 3 %cross-contamination level, and of non-registered coccidiostats and of one antib..

CEN 8/25/2019

I.S. EN 17306:2019Liquid petroleum products - Determination of distillation characteristics atatmospheric pressure - Micro-distillation CEN 10/7/2019

I.S. EN 22568:1990Hand- and machine-operated circular screwing dies and hand-operated diestocks (ISO 2568:1988) CEN 12/21/1990

I.S. EN 25967:1990 Taps and thread cutting - Nomenclature of the main types and terminology (ISO5967:1981)

CEN 12/21/1990



Reference Title En Origin Body Publication D..I.S. EN 22568:1990Hand- and machine-operated circular screwing dies and hand-operated diestocks (ISO 2568:1988) CEN 12/21/1990

I.S. EN 25967:1990Taps and thread cutting - Nomenclature of the main types and terminology (ISO5967:1981) CEN 12/21/1990

I.S. EN 25968:1990 Circular screwing dies - Terminology (ISO 5968:1981) CEN 12/21/1990

I.S. EN 26599-1:1993Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks (ISO6599-1:1983) CEN 6/1/1993

I.S. EN 28233:1991 Thermoplastics valves - Torque - Test method (ISO 8233:1988) CEN 6/30/1992

I.S. EN 28659:1991 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989) CEN 6/30/1992

I.S. EN 45510-2-2:1999Guide for procurement of power station equipment - Part 2-2: Electricalequipment - Uninterruptible power supplies CEN 10/15/1999

I.S. EN 45510-4-1:1999Guide for procurement of power station equipment - Part 4: Boiler auxiliaries -Section 1: Equipment for reduction of dust emissions CEN 8/27/1999

I.S. EN 45510-4-2:1999Guide for procurement of power station equipment - Part 4: Boiler auxiliaries -Section 2: Gas-air, steam-air and gas-gas heaters CEN 8/27/1999

I.S. EN 45510-4-3:1999Guide for procurement of power station equipment - Part 4: Boiler auxiliaries -Section 3: Draught plant CEN 8/27/1999

I.S. EN 45510-4-6:1999Guide for procurement of power station equipment - Part 4: Boiler auxiliaries -Section 6: Flue gas desulphurization (De-SOx) plant CEN 8/27/1999

I.S. EN 45510-4-7:1999Guide for procurement of power station equipment - Part 4: Boiler auxiliaries -Section 7: Ash handling plant CEN 8/27/1999

I.S. EN 45555:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 12/18/2019






I.S. EN 50083-2-4:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 1/8/2020


I.S. EN 50107-1:2002/A1:2004Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 2/25/2007

I.S. EN 50107-3:2018/AC:2018-10Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 11/13/2018









I.S. EN 50121-3-1:2017/A1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/23/2019




I.S. EN 50129:2018/AC:2019-04 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 5/14/2019



Reference Title En Origin Body Publication D..I.S. EN 50121-5:2017/A1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/23/2019

I.S. EN 50129:2018/AC:2019-04Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 5/14/2019



I.S. EN 50160:2010/A2:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 10/16/2019






























I.S. EN 50600-4-2:2016/A1:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 3/19/2019



Reference Title En Origin Body Publication D..I.S. EN 50600-2-3:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 6/25/2019













I.S. EN55016-4-2:2011/A2:2018/AC:2019-02

Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/12/2019



I.S. EN60061-1:1993/A58:2018/AC:2019-04



















I.S. EN 60335-1:2012/A2:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 8/27/2019



Reference Title En Origin Body Publication D..I.S. EN 60335-1:2012/A1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 8/27/2019
























I.S. EN60335-2-109:2010/A1:2018/A2:2018


I.S. EN 60529:1991/A2:2013/AC:2019-02Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/12/2019









I.S. EN 60674-2:2017/A1:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 4/30/2019



Reference Title En Origin Body Publication D..I.S. EN 60662:2012/A11:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/5/2019


















I.S. EN 61010-1:2010/A1:2019/AC:2019-04Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 5/14/2019

I.S. EN 61058-1-1:2016/AC:2019-02Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/12/2019












I.S. EN61400-11:2013/A1:2018/AC:2019-11



I.S. EN 61439-5:2015&AC:2015Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/10/2019

I.S. EN 61496-1:2013&AC:2015 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 7/10/2019



Reference Title En Origin Body Publication D..I.S. EN 61439-5:2015&AC:2015Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/10/2019

I.S. EN 61496-1:2013&AC:2015Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/10/2019



























I.S. EN 301549:2018 Accessibility requirements for ICT products and services CEN 3/1/2019

I.S. EN 301549:2019 Accessibility requirements for ICT products and services CEN 12/23/2019

I.S. EN 419231:2019 Protection profile for trustworthy systems supporting time stamping CEN 9/15/2019

I.S. EN 419241-2:2019Trustworthy Systems Supporting Server Signing - Part 2: Protection profile forQSCD for Server Signing CEN 3/17/2019

I.S. EN IEC 31010:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 9/3/2019


I.S. EN IEC 55016-1-1:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 7/26/2019



Reference Title En Origin Body Publication D..I.S. EN IEC 55015:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 9/19/2019

I.S. EN IEC 55016-1-1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/26/2019


I.S. EN IEC 60027-2:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/23/2019






I.S. EN IEC 60076-11:2018/AC:2019-06Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/9/2019








I.S. EN IEC 60079-7:2015/A1:2018Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 2/6/2018

















I.S. EN IEC 60317-80:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 11/7/2019



Reference Title En Origin Body Publication D..I.S. EN IEC 60317-27-3:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 1/8/2020



































CENELEC 7/19/2019






I.S. EN IEC 60730-2-9:2019/A1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/12/2019



















I.S. EN IEC 60810:2018/A1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 6/18/2019





I.S. EN IEC 60900:2018/AC:2019-02Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/12/2019








CENELEC 3/26/2019

















I.S. EN IEC 61000-4-18:2019/AC:2019-10Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 10/31/2019





















CENELEC 7/9/2019






































CENELEC 8/20/2019



Reference Title En Origin Body Publication D..I.S. EN IEC 61238-1-3:2019/A11:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 10/17/2019



































CENELEC 6/25/2019



Reference Title En Origin Body Publication D..I.S. EN IEC 61918:2018/AC:2019-03Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/2/2019


































I.S. EN IEC 62430:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 1/8/2020



Reference Title En Origin Body Publication D..I.S. EN IEC 62402:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/26/2019



































CENELEC 7/26/2019



Reference Title En Origin Body Publication D..I.S. EN IEC 62881:2018/AC:2019-06Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/9/2019



































CENELEC 6/11/2019



Reference Title En Origin Body Publication D..I.S. EN IEC 63202-1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 10/16/2019





I.S. EN IEC/ASTM 62885-6:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 9/3/2019

I.S. EN IEC/IEEE65700-19-03:2018/AC:2019-03


I.S. EN ISO 105-A03:2019Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining(ISO 105-A03:2019) CEN 11/10/2019

I.S. EN ISO 105-E11:1997Textiles - Tests for colour fastness - Part E11: Colour fastness to steaming (ISO105-E11:1994) CEN 8/15/1997

I.S. EN ISO 105-E13:1997Textiles - Tests for colour fastness - Part E13: Colour fastness - Part E13: Colourfastness to acid-felting: Severe (ISO 105-E13:1994) CEN 8/15/1997

I.S. EN ISO 105-E14:1997Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 8/15/1997

I.S. EN ISO 105-J01:1999Textiles - Tests for colour fastness - Part J01: General principles formeasurement of surface colour (ISO 105-J01:1997) CEN 9/10/1999

I.S. EN ISO 105-J02:1999Textiles - Tests for colour fastness - Part J02: Instrumental assessment ofrelative whiteness (ISO 105-J02:1997, including Technical Corrigendum 1:1998)CEN 9/10/1999

I.S. EN ISO 105-P01:1995Textiles - Tests for colour fastness - Part P01: Colour fastness to dry heat(excluding pressing) (ISO 105-P01:1993) CEN 11/10/1995

I.S. EN ISO 105-X01:1996Textiles - Tests for colour fastness - Part E14: Colour fastness to acid-felting:Mild (ISO 105-E14:1994) CEN 10/25/1996

I.S. EN ISO 105-Z10:1999Textiles - Tests for colour fastness - Part Z10: Determination of relative colourstrength of dyes in solution (ISO 105-Z10:1997) CEN 9/10/1999

I.S. EN ISO 129-1:2019Technical product documentation (TPD) - Presentation of dimensions andtolerances - Part 1: General principles (ISO 129-1:2018) CEN 10/27/2019

I.S. EN ISO 178:2019 Plastics - Determination of flexural properties (ISO 178:2019) CEN 5/26/2019

I.S. EN ISO 180:2019 Plastics - Determination of Izod impact strength (ISO/DIS 180:2019) CEN 1/6/2020

I.S. EN ISO 294-4:2019Plastics - Injection moulding of test specimens of thermoplastic materials - Part4: Determination of moulding shrinkage (ISO 294-4:2018) CEN 2/24/2019

I.S. EN ISO 305:2019Plastics - Determination of thermal stability of poly(vinyl chloride), relatedchlorine-containing homopolymers and copolymers and their compounds -Discoloration method (ISO 305:2019)

CEN 6/30/2019

I.S. EN ISO 307:2019 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019) CEN 6/16/2019

I.S. EN ISO 374-2:2019Protective gloves against dangerous chemicals and micro-organisms - Part 2:Determination of resistance to penetration (ISO 374-2:2019) CEN 11/10/2019

I.S. EN ISO 374-4:2019Protective gloves against dangerous chemicals and micro-organisms - Part 4:Determination of resistance to degradation by chemicals (ISO 374-4:2019) CEN 11/10/2019

I.S. EN ISO 389-7:2019Acoustics - Reference zero for the calibration of audiometric equipment - Part 7:Reference threshold of hearing under free-field and diffuse-field listeningconditions (ISO 389-7:2019)

CEN 12/16/2019

I.S. EN ISO 527-1:2019Plastics - Determination of tensile properties - Part 1: General principles (ISO527-1:2019) CEN 10/7/2019

I.S. EN ISO 585:1999Plastics - Unplasticized cellulose acetate - Determination of moisture content(ISO 585:1990) CEN 9/10/1999

I.S. EN ISO 683-3:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 3/3/2019

I.S. EN ISO 787-9:2019General methods of test for pigments and extenders - Part 9: Determination ofpH value of an aqueous suspension (ISO 787-9:2019) CEN 4/14/2019

I.S. EN ISO 787-13:2019General methods of test for pigments and extenders - Part 13: Determination ofwater-soluble sulfates, chlorides and nitrates (ISO 787-13:2019) CEN 10/14/2019

I.S. EN ISO 787-14:2019General methods of test for pigments and extenders - Part 14: Determination ofresistivity of aqueous extract (ISO 787-14:2019) CEN 4/14/2019

I.S. EN ISO 787-15:2019General methods of test for pigments and extenders - Part 15: Comparison ofresistance to light of coloured pigments of similar types (ISO 787-15:2019) CEN 10/14/2019

I.S. EN ISO 787-17:2019General methods of test for pigments and extenders - Part 17: Comparison oflightening power of white pigments (ISO 787-17:2019) CEN 6/2/2019

I.S. EN ISO 787-25:2019General methods of test for pigments and extenders - Part 25: Comparison ofthe colour, in full-shade systems, of white, black and coloured pigments -Colorimetric method (ISO 787-25:2019)

CEN 3/31/2019

I.S. EN ISO 846:2019 Plastics - Evaluation of the action of microorganisms (ISO 846:2019) CEN 4/21/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 787-25:2019

General methods of test for pigments and extenders - Part 25: Comparison ofthe colour, in full-shade systems, of white, black and coloured pigments -Colorimetric method (ISO 787-25:2019) CEN 3/31/2019

I.S. EN ISO 846:2019 Plastics - Evaluation of the action of microorganisms (ISO 846:2019) CEN 4/21/2019

I.S. EN ISO 945-1:2019Microstructure of cast irons - Part 1: Graphite classification by visual analysis(ISO 945-1:2019) CEN 8/4/2019

I.S. EN ISO 1110:2019Plastics - Polyamides - Accelerated conditioning of test specimens (ISO1110:2019) CEN 6/30/2019

I.S. EN ISO 1183-1:2019Plastics - Methods for determining the density of non-cellular plastics - Part 1:Immersion method, liquid pycnometer method and titration method (ISO1183-1:2019, Corrected version 2019-05)

CEN 4/21/2019

I.S. EN ISO 1183-2:2019Plastics - Methods for determining the density of non-cellular plastics - Part 2:Density gradient column method (ISO 1183-2:2019) CEN 4/21/2019

I.S. EN ISO 1403:2019Rubber hoses, textile-reinforced, for general-purpose water applications -Specification (ISO 1403:2019) CEN 9/22/2019

I.S. EN ISO 1518-1:2019Paints and varnishes - Determination of scratch resistance - Part 1:Constant-loading method (ISO 1518-1:2019) CEN 7/21/2019

I.S. EN ISO 1518-2:2019Paints and varnishes - Determination of scratch resistance - Part 2:Variable-loading method (ISO 1518-2:2019) CEN 7/21/2019

I.S. EN ISO 1599:1999Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO1599:1990) CEN 10/1/1999

I.S. EN ISO 1600:1999Plastics - Cellulose acetate - Determination of light absorption on mouldedspecimens produced using different periods of heating (ISO 1600:1990) CEN 10/1/1999

I.S. EN ISO 1622-2:1999Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2:Preparation of test specimens and determination of properties (ISO1622-2:1995)

CEN 10/1/1999

I.S. EN ISO 1833-3:2019Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate withcertain other fibres (method using acetone) (ISO 1833-3:2019) CEN 6/2/2019

I.S. EN ISO 1833-6:2019Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, certaintypes of cupro, modal or lyocell with certain other fibres (method using formicacid and zinc chloride) (ISO 1833-6:2018)

CEN 4/14/2019

I.S. EN ISO 1833-9:2019Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate withcertain other fibres (method using benzyl alcohol) (ISO 1833-9:2019) CEN 11/3/2019

I.S. EN ISO 1833-10:2019Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate orpolylactide with certain other fibres (method using dichloromethane) (ISO1833-10:2019)

CEN 6/2/2019

I.S. EN ISO 1833-12:2019Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certainmodacrylics, certain chlorofibres, certain elastane fibres with certain other fibres(method using dimethylformamide) (ISO 1833-12:2019)

CEN 8/4/2019

I.S. EN ISO 1833-13:2019Textiles - Quantitative chemical analysis - Part 13: Mixtures of certainchlorofibres with certain other fibres (method using carbon disulfide/acetone)(ISO 1833-13:2019)

CEN 11/10/2019

I.S. EN ISO 1833-14:2019Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate withcertain other fibres (method using glacial acetic acid) (ISO 1833-14:2019) CEN 11/3/2019

I.S. EN ISO 1833-15:2019Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute with certainanimal fibres (method by determining nitrogen content) (ISO 1833-15:2019) CEN 12/16/2019

I.S. EN ISO 1833-16:2019Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylenefibres with certain other fibres (method using xylene) (ISO 1833-16:2019) CEN 8/4/2019

I.S. EN ISO 1833-18:2019Textiles - Quantitative chemical analysis - Part 18: Mixtures of silk with otherprotein fibres (method using sulfuric acid) (ISO 1833-18:2019) CEN 6/2/2019

I.S. EN ISO 1833-20:2019Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane withcertain other fibres (method using dimethylacetamide) (ISO 1833-20:2018) CEN 4/14/2019

I.S. EN ISO 1833-21:2019Textiles - Quantitative chemical analysis - Part 21: Mixtures of chlorofibres,certain modacrylics, certain elastanes, acetates, triacetates with certain otherfibres (method using cyclohexanone) (ISO 1833-21:2019)

CEN 6/2/2019

I.S. EN ISO 1833-27:2019Textiles - Quantitative chemical analysis - Part 27: Mixtures of cellulose fibreswith certain other fibres (method using aluminium sulfate) (ISO 1833-27:2018) CEN 7/7/2019

I.S. EN ISO 2063-1:2019Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Designconsiderations and quality requirements for corrosion protection systems (ISO2063-1:2019)

CEN 4/7/2019

I.S. EN ISO 2307:2019Fibre ropes - Determination of certain physical and mechanical properties (ISO2307:2019) CEN 9/29/2019

I.S. EN ISO 2376:2019Anodizing of aluminium and its alloys - Determination of breakdown voltage andwithstand voltage (ISO 2376:2019) CEN 4/28/2019

I.S. EN ISO 2400:2012Non-destructive testing - Ultrasonic testing - Specification for calibration blockNo. 1 (ISO 2400:2012) CEN 10/3/2012

I.S. EN ISO 2431:2019Paints and varnishes - Determination of flow time by use of flow cups (ISO2431:2019, Corrected version 2019-09) CEN 7/28/2019

I.S. EN ISO 2440:2019Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO2440:2019) CEN 12/16/2019

I.S. EN ISO 2553:2019Welding and allied processes - Symbolic representation on drawings - Weldedjoints (ISO 2553:2019) CEN 5/5/2019

I.S. EN ISO 2554:1998Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO2554:1997) CEN 1/22/1999

I.S. EN ISO 2808:2019 Paints and varnishes - Determination of film thickness (ISO 2808:2019) CEN 10/7/2019

I.S. EN ISO 2812-3:2019 Paints and varnishes - Determination of resistance to liquids - Part 3: Methodusing an absorbent medium (ISO 2812-3:2019)

CEN 5/26/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 2808:2019 Paints and varnishes - Determination of film thickness (ISO 2808:2019) CEN 10/7/2019

I.S. EN ISO 2812-3:2019Paints and varnishes - Determination of resistance to liquids - Part 3: Methodusing an absorbent medium (ISO 2812-3:2019) CEN 5/26/2019

I.S. EN ISO 2818:2019 Plastics - Preparation of test specimens by machining (ISO 2818:2018) CEN 1/27/2019

I.S. EN ISO 2898-1:1999Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusionmaterials - Part 1: Designation system and basis for specifications (ISO2898-1:1996)

CEN 10/1/1999

I.S. EN ISO 3015:2019Petroleum and related products from natural or synthetic sources -Determination of cloud point (ISO 3015:2019) CEN 6/16/2019

I.S. EN ISO 3016:2019Petroleum and related products from natural or synthetic sources -Determination of pour point (ISO 3016:2019) CEN 6/16/2019

I.S. EN ISO 3175-5:2019Textiles - Professional care, drycleaning and wetcleaning of fabrics andgarments - Part 5: Procedure for testing performance when cleaning andfinishing using dibutoxymethane (ISO 3175-5:2019)

CEN 11/3/2019

I.S. EN ISO 3175-6:2019Textiles - Professional care, drycleaning and wetcleaning of fabrics andgarments - Part 6: Procedure for testing performance when cleaning andfinishing using decamethylpentacyclosiloxane (ISO 3175-6:2019)

CEN 11/3/2019

I.S. EN ISO 3183:2019Petroleum and natural gas industries - Steel pipe for pipeline transportationsystems (ISO 3183:2019) CEN 11/10/2019

I.S. EN ISO 3233-1:2019Paints and varnishes - Determination of percentage volume of non-volatilematter - Part 1: Method using a coated test panel to determine non-volatilematter and to determine dry-film density by the Archimedes principle (ISO 323..

CEN 12/23/2019

I.S. EN ISO 3233-2:2019Paints and varnishes - Determination of the percentage volume of non-volatilematter - Part 2: Method using the determination of non-volatile-matter contentin accordance with ISO 3251 and determination of dry film density on coated t..

CEN 10/21/2019

I.S. EN ISO 3251:2019Paints, varnishes and plastics - Determination of non-volatile-matter content(ISO 3251:2019) CEN 6/30/2019

I.S. EN ISO 3252:2019 Powder metallurgy - Vocabulary (ISO 3252:2019) CEN 10/14/2019

I.S. EN ISO 3269:2019 Fasteners - Acceptance inspection (ISO 3269:2019) CEN 10/7/2019

I.S. EN ISO 3405:2019Petroleum and related products from natural or synthetic sources -Determination of distillation characteristics at atmospheric pressure (ISO3405:2019)

CEN 5/19/2019

I.S. EN ISO 3451-1:2019 Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2019) CEN 3/24/2019

I.S. EN ISO 3630-1:2019Dentistry - Endodontic instruments - Part 1: General requirements (ISO3630-1:2019) CEN 10/27/2019

I.S. EN ISO 3671:1999Plastics - Aminoplastic moulding materials - Determination of volatile matter(ISO 3671:1976) CEN 3/19/1999

I.S. EN ISO 3740:2019Acoustics - Determination of sound power levels of noise sources - Guidelinesfor the use of basic standards (ISO 3740:2019) CEN 4/14/2019

I.S. EN ISO 3743-2:2019Acoustics - Determination of sound power levels of noise sources using soundpressure - Engineering methods for small, movable sources in reverberant fields- Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)

CEN 10/14/2019

I.S. EN ISO 3821:2019Gas welding equipment - Rubber hoses for welding, cutting and allied processes(ISO 3821:2019) CEN 10/14/2019

I.S. EN ISO 3826-1:2019Plastics collapsible containers for human blood and blood components - Part 1:Conventional containers (ISO 3826-1:2019) CEN 11/3/2019

I.S. EN ISO 3830:1995Petroleum products - Determination of lead content of gasoline - Iodinemonochloride method (ISO 3830:1993) CEN 6/14/1996

I.S. EN ISO 3924:2019Petroleum products - Determination of boiling range distribution - Gaschromatography method (ISO 3924:2019) CEN 9/22/2019

I.S. EN ISO 3964:2016/A1:2019Dentistry - Coupling dimensions for handpiece connectors - Amendment 1:Interface dimensions (ISO 3964:2016/Amd 1:2018) CEN 10/21/2019

I.S. EN ISO 4049:2019 Dentistry - Polymer-based restorative materials (ISO 4049:2019) CEN 7/7/2019

I.S. EN ISO 4126-1:2013/A2:2019Safety devices for protection against excessive pressure - Part 1: Safety valves(ISO 4126-1:2013) CEN 6/23/2019

I.S. EN ISO 4126-2:2019Safety devices for protection against excessive pressure - Part 2: Bursting discsafety devices (ISO 4126-2:2018) CEN 3/31/2019

I.S. EN ISO 4180:2019Packaging - Complete, filled transport packages - General rules for thecompilation of performance test schedules (ISO 4180:2019) CEN 12/16/2019

I.S. EN ISO 4210-5:2014Cycles - Safety requirements for bicycles - Part 5: Steering test methods (ISO4210-5:2014, Corrected version 2015-02-01) CEN 7/19/2014

I.S. EN ISO 4254-7:2017Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters,cotton harvesters and sugar cane harversters (ISO 4254-7:2017, Correctedversion 2019-03)

CEN 12/24/2017

I.S. EN ISO 4259-1:2017/A1:2019Petroleum and related products - Precision of measurement methods andresults - Part 1: Determination of precision data in relation to methods of test -Amendment 1 (ISO 4259-1:2017/Amd 1:2019)

CEN 11/3/2019

I.S. EN ISO 4259-2:2017/A1:2019Petroleum and related products - Precision of measurement methods andresults - Part 2: Interpretation and application of precision data in relation tomethods of test - Amendment 1 (ISO 4259-2:2017/Amd 1:2019)

CEN 11/3/2019

I.S. EN ISO 4489:2019 Hardmetals - Sampling and testing (ISO 4489:2019) CEN 11/3/2019

I.S. EN ISO 4491-4:2019 Metallic powders - Determination of oxygen content by reduction methods - Part4: Total oxygen by reduction-extraction (ISO 4491-4:2019)

CEN 5/19/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 4489:2019 Hardmetals - Sampling and testing (ISO 4489:2019) CEN 11/3/2019

I.S. EN ISO 4491-4:2019Metallic powders - Determination of oxygen content by reduction methods - Part4: Total oxygen by reduction-extraction (ISO 4491-4:2019) CEN 5/19/2019

I.S. EN ISO 4577:2019Plastics - Polypropylene and propylene-copolymers - Determination of thermaloxidative stability in air - Oven method (ISO 4577:2019) CEN 9/22/2019

I.S. EN ISO 4884:2019Hardmetals - Sampling and testing of powders using sintered test pieces (ISO4884:2019) CEN 11/3/2019

I.S. EN ISO 4920:2012Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO4920:2012) CEN 9/19/2012

I.S. EN ISO 5010:2019Earth-moving machinery - Wheeled machines - Steering requirements(ISO/FDIS 5010:2019) CEN 1/6/2020

I.S. EN ISO 5165:2018Petroleum products - Determination of the ignition quality of diesel fuels -Cetane engine method (ISO 5165:2017) CEN 2/18/2018

I.S. EN ISO 5167-6:2019Measurement of fluid flow by means of pressure differential devices inserted incircular cross-section conduits running full - Part 6: Wedge meters (ISO5167-6:2019)

CEN 10/21/2019

I.S. EN ISO 5171:2019Gas welding equipment - Pressure gauges used in welding, cutting and alliedprocesses (ISO 5171:2019) CEN 6/16/2019

I.S. EN ISO 5175-2:2017Gas welding equipment - Safety devices - Part 2: Devices not incorporating aflame (flashback) arrestor (ISO 5175-2:2017, Corrected version 2019-01) CEN 12/17/2017

I.S. EN ISO 5178:2019Destructive tests on welds in metallic materials - Longitudinal tensile test onweld metal in fusion welded joints (ISO 5178:2019) CEN 3/17/2019

I.S. EN ISO 5356-2:2012/A1:2019Anaesthetic and respiratory equipment - Conical connectors - Part 2:Screw-threaded weight-bearing connectors - Amendment 1 (ISO5356-2:2012/Amd 1:2019)

CEN 10/14/2019

I.S. EN ISO 5362:2019 Anaesthetic reservoir bags (ISO 5362:2006) CEN 10/7/2019

I.S. EN ISO 5398-4:2019Leather - Chemical determination of chromic oxide content - Part 4:Quantification by inductively coupled plasma (ICP) (ISO 5398-4:2018) CEN 2/24/2019

I.S. EN ISO 5814:2012Water quality - Determination of dissolved oxygen - Electrochemical probemethod (ISO 5814:2012) CEN 10/24/2012

I.S. EN ISO 5815-1:2019Water quality - Determination of biochemical oxygen demand after n days(BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO5815-1:2019)

CEN 10/7/2019

I.S. EN ISO 5832-1:2019Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO5832-1:2016) CEN 10/21/2019

I.S. EN ISO 5832-6:2019Implants for surgery - Metallic materials - Part 6: Wroughtcobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997) CEN 10/21/2019

I.S. EN ISO 5832-7:2019Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formedcobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:2016) CEN 10/21/2019

I.S. EN ISO 6115:1996 Shipbuilding - Trawl winches (ISO 6115:1988) CEN 8/15/1997


I.S. EN ISO 6149-1:2019Connections for hydraulic fluid power and general use - Ports and stud endswith ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncatedhousing for O-ring seal (ISO 6149-1:2019)

CEN 6/2/2019

I.S. EN ISO 6165:2012Earth-moving machinery - Basic types - Identification and terms and definitions(ISO 6165:2012) CEN 9/21/2012

I.S. EN ISO 6218:2019Inland navigation vessels - Manually- and power-operated coupling devices forrope connections of pushing units and coupled vessels - Safety requirementsand main dimensions (ISO 6218:2019)

CEN 10/21/2019

I.S. EN ISO 6246:2017/A1:2019Petroleum products - Gum content of fuels - Jet evaporation method -Amendment 1: Purity requirement for n-heptane (ISO 6246:2017/Amd 1:2019) CEN 10/27/2019

I.S. EN ISO 6341:2012Water quality - Determination of the inhibition of the mobility of Daphnia magnaStraus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:2012) CEN 10/24/2012

I.S. EN ISO 6504-1:2019Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munkmethod for white and light-coloured paints (ISO 6504-1:2019) CEN 6/30/2019

I.S. EN ISO 6504-3:2019Paints and varnishes - Determination of hiding power - Part 3: Determination ofhiding power of paints for masonry and concrete (ISO/FDIS 6504-3:2019) CEN 1/6/2020

I.S. EN ISO 6721-1:2019Plastics - Determination of dynamic mechanical properties - Part 1: Generalprinciples (ISO 6721-1:2019) CEN 6/16/2019

I.S. EN ISO 6721-2:2019Plastics - Determination of dynamic mechanical properties - Part 2:Torsion-pendulum method (ISO 6721-2:2019) CEN 6/16/2019

I.S. EN ISO 6888-1:1999/A2:2018Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 9/30/2018

I.S. EN ISO 6892-1:2019Metallic materials - Tensile testing - Part 1: Method of test at room temperature(ISO 6892-1:2019) CEN 12/23/2019

I.S. EN ISO 6947:2019 Welding and allied processes - Welding positions (ISO 6947:2019) CEN 11/22/2019

I.S. EN ISO 7027-2:2019Water quality - Determination of turbidity - Part 2: Semi-quantitative methodsfor the assessment of transparency of waters (ISO 7027-2:2019) CEN 3/10/2019

I.S. EN ISO 7053:2019 Fasteners - Hexagon washer head tapping screws (ISO 7053:2019) CEN 7/28/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 7027-2:2019Water quality - Determination of turbidity - Part 2: Semi-quantitative methodsfor the assessment of transparency of waters (ISO 7027-2:2019) CEN 3/10/2019

I.S. EN ISO 7053:2019 Fasteners - Hexagon washer head tapping screws (ISO 7053:2019) CEN 7/28/2019

I.S. EN ISO 7263-1:2019Corrugating medium - Determination of the flat crush resistance after laboratoryfluting - Part 1: A-flute (ISO 7263-1:2019) CEN 2/10/2019

I.S. EN ISO 7263-2:2019Corrugating medium - Determination of the flat crush resistance after laboratoryfluting - Part 2: B-flute (ISO 7263-2:2018) CEN 1/27/2019

I.S. EN ISO 7393-2:2018Water quality - Determination of free chlorine and total chlorine - Part 2:Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine controlpurposes (ISO 7393-2:2017)

CEN 2/18/2018

I.S. EN ISO 7396-1:2016/A1:2019Medical gas pipeline systems - Part 1: Pipeline systems for compressed medicalgases and vacuum - Amendment 1 (ISO 7396-1:2016/Amd 1:2017) CEN 2/17/2019

I.S. EN ISO 7492:2019 Dentistry - Dental explorer (ISO 7492:2019) CEN 5/19/2019

I.S. EN ISO 7808:1998Plastics - Thermosetting moulding materials - Determination of transfer flow(ISO 7808:1992) CEN 3/19/1999

I.S. EN ISO 7886-1:2018Sterile hypodermic syringes for single use - Part 1: Syringes for manual use(ISO 7886-1:2017, Corrected version 2019-08) CEN 5/25/2018

I.S. EN ISO 7886-4:2019Sterile hypodermic syringes for single use - Part 4: Syringes with re-useprevention feature (ISO 7886-4:2018) CEN 3/24/2019

I.S. EN ISO 7971-2:2019Cereals - Determination of bulk density, called mass per hectolitre - Part 2:Method of traceability for measuring instruments through reference to theinternational standard instrument (ISO/FDIS 7971-2:2018)

CEN 3/24/2019

I.S. EN ISO 7971-3:2019Cereals - Determination of bulk density, called mass per hectolitre - Part 3:Routine method (ISO 7971-3:2019) CEN 3/24/2019

I.S. EN ISO 8092-3:1999Road vehicles - Connections for on-board electrical wiring harnesses - Part 3:Tabs for multi-pole connections - Dimensions and specific requirements (ISO8092-3:1996)

CEN 12/3/1999

I.S. EN ISO 8130-1:2019Coating powders - Part 1: Determination of particle size distribution by sieving(ISO 8130-1:2019) CEN 5/26/2019

I.S. EN ISO 8130-7:2019Coating powders - Part 7: Determination of loss of mass on stoving (ISO8130-7:2019) CEN 5/26/2019

I.S. EN ISO 8130-11:2019 Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019) CEN 5/26/2019

I.S. EN ISO 8130-12:2019 Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019) CEN 5/26/2019

I.S. EN ISO 8130-13:2019Coating powders - Part 13: Particle size analysis by laser diffraction (ISO8130-13:2019) CEN 5/26/2019

I.S. EN ISO 8130-14:2019 Coating powders - Part 14: Vocabulary (ISO 8130-14:2019) CEN 5/26/2019

I.S. EN ISO 8205-3:2012Water-cooled secondary connection cables for resistance welding - Part 3: Testrequirements (ISO 8205-3:2012) CEN 10/24/2012

I.S. EN ISO 8289-2:2019Vitreous and porcelain enamels - Low-voltage test for detecting and locatingdefects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019) CEN 5/5/2019

I.S. EN ISO 8362-1:2019Injection containers and accessories - Part 1: Injection vials made of glasstubing (ISO 8362-1:2018) CEN 11/3/2019

I.S. EN ISO 8384:2019 Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2019) CEN 10/21/2019

I.S. EN ISO 8388:2003 Knitted fabrics - Types - Vocabulary (ISO 8388:1998) CEN 10/15/2003

I.S. EN ISO 8504-1:2019Preparation of steel substrates before application of paints and related products- Surface preparation methods - Part 1: General principles (ISO 8504-1:2019) CEN 11/27/2019

I.S. EN ISO 8504-2:2019Preparation of steel substrates before application of paints and related products- Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO8504-2:2019)

CEN 11/27/2019

I.S. EN ISO 8560:2019Technical drawings - Construction drawings - Representation of modular sizes,lines and grids (ISO 8560:2019) CEN 5/19/2019

I.S. EN ISO 8654:2018/A1:2019Jewellery - Colours of gold alloys - Definition, range of colours and designation -Amendment 1 (ISO 8654:2018/DAM 1:2019) CEN 1/6/2020

I.S. EN ISO 8871-3:2004/A1:2019Elastomeric parts for parenterals and for devices for pharmaceutical use - Part3: Determination of released-particle count - Amendment 1 (ISO8871-3:2003/Amd 1:2018)

CEN 4/14/2019

I.S. EN ISO 9080:2012Plastics piping and ducting systems - Determination of the long-term hydrostaticstrength of thermoplastics materials in pipe form by extrapolation (ISO9080:2012)

CEN 10/24/2012

I.S. EN ISO 9090:2019Gas tightness of equipment for gas welding and allied processes (ISO9090:2019) CEN 12/8/2019

I.S. EN ISO 9092:2019 Nonwovens - Vocabulary (ISO 9092:2019) CEN 5/5/2019

I.S. EN ISO 9167:2019Rapeseed and rapeseed meals - Determination of glucosinolates content -Method using high-performance liquid chromatography (ISO 9167:2019) CEN 7/7/2019

I.S. EN ISO 9202:2019Jewellery and precious metals - Fineness of precious metal alloys (ISO9202:2019) CEN 6/16/2019

I.S. EN ISO 9241-210:2019 Ergonomics of human-system interaction - Part 210: Human-centred design forinteractive systems (ISO 9241-210:2019)

CEN 9/8/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 9202:2019Jewellery and precious metals - Fineness of precious metal alloys (ISO9202:2019) CEN 6/16/2019

I.S. EN ISO 9241-210:2019Ergonomics of human-system interaction - Part 210: Human-centred design forinteractive systems (ISO 9241-210:2019) CEN 9/8/2019

I.S. EN ISO 9241-220:2019Ergonomics of human-system interaction - Part 220: Processes for enabling,executing and assessing human-centred design within organizations (ISO9241-220:2019)

CEN 5/5/2019

I.S. EN ISO 9455-10:2012Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spreadmethod (ISO 9455-10:2012) CEN 10/3/2012

I.S. EN ISO 9455-16:2019Soft soldering fluxes - Test methods - Part 16: Flux efficacy test, wettingbalance method (ISO 9455-16:2019) CEN 11/3/2019

I.S. EN ISO 9514:2019Paints and varnishes - Determination of the pot life of multicomponent coatingsystems - Preparation and conditioning of samples and guidelines for testing(ISO 9514:2019)

CEN 7/26/2019

I.S. EN ISO 9554:2019 Fibre ropes - General specifications (ISO 9554:2019) CEN 9/22/2019

I.S. EN ISO 9693:2019Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems(ISO 9693:2019) CEN 12/8/2019

I.S. EN ISO 9697:2019Water quality - Gross beta activity - Test method using thick source (ISO9697:2018) CEN 7/7/2019

I.S. EN ISO 9698:2019Water quality - Tritium - Test method using liquid scintillation counting (ISO9698:2019) CEN 6/16/2019

I.S. EN ISO 9809-1:2019Gas cylinders - Design, construction and testing of refillable seamless steel gascylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubeswith tensile strength less than 1 100 MPa (ISO 9809-1:2019)

CEN 10/27/2019

I.S. EN ISO 9809-2:2019Gas cylinders - Design, construction and testing of refillable seamless steel gascylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubeswith tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2019)

CEN 10/27/2019

I.S. EN ISO 9809-3:2019Gas cylinders - Design, construction and testing of refillable seamless steel gascylinders and tubes - Part 3: Normalized steel cylinders and tubes (ISO9809-3:2019)

CEN 10/27/2019

I.S. EN ISO 9863-1:2016/A1:2019Geosynthetics - Determination of thickness at specified pressures - Part 1:Single layers - Amendment 1 (ISO 9863-1:2016/DAM 1:2019) CEN 1/6/2020

I.S. EN ISO 9873:2019 Dentistry - Intra-oral mirrors (ISO 9873:2019) CEN 5/26/2019

I.S. EN ISO 9994:2019 Lighters - Safety specification (ISO 9994:2018) CEN 2/10/2019

I.S. EN ISO 10070:2019Metallic powders - Determination of envelope-specific surface area frommeasurements of the permeability to air of a powder bed under steady-stateflow conditions (ISO/FDIS 10070:2019)

CEN 1/6/2020

I.S. EN ISO 10079-1:2015Medical suction equipment - Part 1: Electrically powered suction equipment (ISO10079-1:2015) CEN 12/16/2015

I.S. EN ISO 10079-1:2015/A1:2019Medical suction equipment - Part 1: Electrically powered suction equipment -Amendment 1: Changes to requirements for operating at extremes oftemperature (ISO 10079-1:2015/Amd 1:2018)

CEN 2/17/2019

I.S. EN ISO 10087:2019 Small craft - Craft identification - Coding system (ISO 10087:2019) CEN 4/7/2019

I.S. EN ISO 10111:2019Metallic and other inorganic coatings - Measurement of mass per unit area -Review of gravimetric and chemical analysis methods (ISO 10111:2019) CEN 2/24/2019

I.S. EN ISO 10123:2019Adhesives - Determination of shear strength of anaerobic adhesives usingpin-and-collar specimens (ISO 10123:2013) CEN 7/7/2019

I.S. EN ISO 10320:2019 Geosynthetics - Identification on site (ISO 10320:2019) CEN 4/21/2019

I.S. EN ISO 10363:1996 Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992) CEN 5/3/1996

I.S. EN ISO 10418:2019Petroleum and natural gas industries - Offshore production installations -Process safety systems (ISO 10418:2019) CEN 7/7/2019

I.S. EN ISO 10426-3:2019Petroleum and natural gas industries - Cements and materials for wellcementing - Part 3: Testing of deepwater well cement formulations (ISO10426-3:2019)

CEN 10/21/2019

I.S. EN ISO 10460:2018Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders- Periodic inspection and testing (ISO 10460:2018, Corrected version 2019-04) CEN 11/12/2018

I.S. EN ISO 10462:2013/A1:2019Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance -Amendment 1 (ISO 10462:2013/Amd 1:2019) CEN 9/15/2019

I.S. EN ISO 10517:2019 Powered hand-held hedge trimmers - Safety (ISO 10517:2019) CEN 3/17/2019

I.S. EN ISO 10524-1:2019Pressure regulators for use with medical gases - Part 1: Pressure regulators andpressure regulators with flow-metering devices (ISO 10524-1:2018) CEN 2/17/2019

I.S. EN ISO 10524-2:2019Pressure regulators for use with medical gases - Part 2: Manifold and linepressure regulators (ISO 10524-2:2018) CEN 2/17/2019

I.S. EN ISO 10524-3:2019Pressure regulators for use with medical gases - Part 3: Pressure regulatorsintegrated with cylinder valves (VIPRs) (ISO 10524-3:2019) CEN 2/17/2019

I.S. EN ISO 10545-4:2019Ceramic tiles - Part 4: Determination of modulus of rupture and breakingstrength (ISO 10545-4:2019) CEN 4/14/2019

I.S. EN ISO 10551:2019Ergonomics of the physical environment - Subjective judgement scales forassessing physical environments (ISO 10551:2019) CEN 8/18/2019

I.S. EN ISO 10555-6:2017/A1:2019 Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneousimplanted ports - Amendment 1 (ISO 10555-6:2015/Amd 1:2019)

CEN 11/10/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 10551:2019Ergonomics of the physical environment - Subjective judgement scales forassessing physical environments (ISO 10551:2019) CEN 8/18/2019

I.S. EN ISO 10555-6:2017/A1:2019Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneousimplanted ports - Amendment 1 (ISO 10555-6:2015/Amd 1:2019) CEN 11/10/2019

I.S. EN ISO 10642:2019Fasteners - Hexagon socket countersunk head screws with reduced loadability(ISO 10642:2019) CEN 11/3/2019

I.S. EN ISO 10704:2019Water quality - Gross alpha and gross beta activity - Test method using thinsource deposit (ISO 10704:2019) CEN 4/14/2019

I.S. EN ISO 10722:2019Geosynthetics - Index test procedure for the evaluation of mechanical damageunder repeated loading - Damage caused by granular material (laboratory testmethod) (ISO 10722:2019)

CEN 12/22/2019

I.S. EN ISO 10819:2013/A1:2019Mechanical vibration and shock - Hand-arm vibration - Measurement andevaluation of the vibration transmissibility of gloves at the palm of the hand -Amendment 1 (ISO 10819:2013/Amd 1:2019)

CEN 3/6/2019

I.S. EN ISO 10833:2019Textile floor coverings - Determination of resistance to damage at cut edgesusing the modified Vettermann drum test (ISO 10833:2017) CEN 6/23/2019

I.S. EN ISO 10893-3:2011/A1:2019Non-destructive testing of steel tubes - Part 3: Automated full peripheral fluxleakage testing of seamless and welded (except submerged arc-welded)ferromagnetic steel tubes for the detection of longitudinal and/or transverse im..

CEN 11/3/2019

I.S. EN ISO 10893-6:2019Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weldseam of welded steel tubes for the detection of imperfections (ISO10893-6:2019)

CEN 3/31/2019

I.S. EN ISO 10893-7:2019Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of theweld seam of welded steel tubes for the detection of imperfections (ISO10893-7:2019)

CEN 3/31/2019

I.S. EN ISO 10961:2019Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection(ISO 10961:2019) CEN 12/22/2019

I.S. EN ISO 11058:2019Geotextiles and geotextile-related products - Determination of waterpermeability characteristics normal to the plane, without load (ISO 11058:2019)CEN 7/26/2019

I.S. EN ISO 11070:2014/A1:2018Sterile single-use intravascular introducers, dilators and guidewires -Amendment 1 (ISO 11070:2014/Amd 1:2018) CEN 7/22/2018

I.S. EN ISO 11073-10425:2019Health informatics - Personal health device communication - Part 10425: Devicespecialization - Continuous glucose monitor (CGM) (ISO/IEEE11073-10425:2019)

CEN 5/6/2019

I.S. EN ISO 11117:2019Gas cylinders - Valve protection caps and guards - Design, construction andtests (ISO 11117:2019) CEN 12/22/2019

I.S. EN ISO 11118:2015Gas cylinders - Non-refillable metallic gas cylinders - Specification and testmethods (ISO 11118:2015) CEN 11/8/2015

I.S. EN ISO 11135:2014/A1:2019Sterilization of health-care products - Ethylene oxide - Requirements for thedevelopment, validation and routine control of a sterilization process for medicaldevices - Amendment 1: Revision of Annex E, Single batch release (ISO 11135..

CEN 11/26/2019

I.S. EN ISO 11137-1:2015/A2:2019Sterilization of health care products - Radiation - Part 1: Requirements fordevelopment, validation and routine control of a sterilization process for medicaldevices - Amendment 2: Revision to 4.3.4 and 11.2 (ISO 11137-1:2006/Amd 2..

CEN 12/8/2019

I.S. EN ISO 11138-7:2019Sterilization of health care products - Biological indicators - Part 7: Guidance forthe selection, use and interpretation of results (ISO 11138-7:2019) CEN 5/5/2019

I.S. EN ISO 11139:2018Sterilization of health care products - Vocabulary of terms used in sterilizationand related equipment and process standards (ISO 11139:2018) CEN 9/30/2018

I.S. EN ISO 11177:2019Vitreous and porcelain enamels - Inside and outside enamelled valves andpressure pipe fittings for untreated and potable water supply - Qualityrequirements and testing (ISO 11177:2019)

CEN 5/5/2019

I.S. EN ISO 11197:2019 Medical supply units (ISO 11197:2019) CEN 12/16/2019

I.S. EN ISO 11274:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 11/3/2019

I.S. EN ISO 11296-7:2019Plastics piping systems for renovation of underground non-pressure drainageand sewerage networks - Part 7: Lining with spirally-wound pipes (ISO11296-7:2019)

CEN 3/3/2019

I.S. EN ISO 11343:2019Adhesives - Determination of dynamic resistance to cleavage of high-strengthadhesive bonds under impact wedge conditions - Wedge impact method (ISO11343:2019)

CEN 7/28/2019

I.S. EN ISO 11393-2:2019Protective clothing for users of hand-held chainsaws - Part 2: Performancerequirements and test methods for leg protectors (ISO 11393-2:2018) CEN 10/14/2019

I.S. EN ISO 11393-4:2019Protective clothing for users of hand-held chainsaws - Part 4: Performancerequirements and test methods for protective gloves (ISO 11393-4:2018) CEN 10/14/2019

I.S. EN ISO 11393-5:2019Protective clothing for users of hand-held chainsaws - Part 5: Performancerequirements and test methods for protective gaiters (ISO 11393-5:2018) CEN 8/11/2019

I.S. EN ISO 11393-6:2019Protective clothing for users of hand-held chainsaws - Part 6: Performancerequirements and test methods for upper body protectors (ISO 11393-6:2018,Corrected version 2019-11)

CEN 8/11/2019

I.S. EN ISO 11401:1998Plastics - Phenolic resins - Separation by liquid chromatography (ISO11401:1993) CEN 3/19/1999

I.S. EN ISO 11409:1998Plastics - Phenolic resins - Determination of heats and temperatures of reactionby differential scanning calorimetry (ISO 11409:1993) CEN 3/19/1999

I.S. EN ISO 11494:2019Jewellery and precious metals - Determination of platinum in platinum alloys -ICP-OES method using an internal standard element (ISO 11494:2019) CEN 9/15/2019

I.S. EN ISO 11495:2019Jewellery and precious metals - Determination of palladium in palladium alloys -ICP-OES method using an internal standard element (ISO 11495:2019) CEN 9/8/2019

I.S. EN ISO 11551:2019Optics and photonics - Lasers and laser-related equipment - Test method forabsorptance of optical laser components (ISO 11551:2019) CEN 11/27/2019

I.S. EN ISO 11591:2019 Small craft - Field of vision from the steering position (ISO 11591:2019) CEN 5/26/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 11551:2019Optics and photonics - Lasers and laser-related equipment - Test method forabsorptance of optical laser components (ISO 11551:2019) CEN 11/27/2019

I.S. EN ISO 11591:2019 Small craft - Field of vision from the steering position (ISO 11591:2019) CEN 5/26/2019

I.S. EN ISO 11665-1:2019Measurement of radioactivity in the environment - Air: radon-222 - Part 1:Origins of radon and its short-lived decay products and associated measurementmethods (ISO 11665-1:2019)

CEN 10/27/2019

I.S. EN ISO 11665-2:2019Measurement of radioactivity in the environment - Air: radon-222 - Part 2:Integrated measurement method for determining average potential alphaenergy concentration of its short-lived decay products (ISO 11665-2:2019)

CEN 11/3/2019

I.S. EN ISO 11665-11:2019Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Testmethod for soil gas with sampling at depth (ISO 11665-11:2016) CEN 10/27/2019

I.S. EN ISO 11737-1:2018Sterilization of health care products - Microbiological methods - Part 1:Determination of a population of microorganisms on products (ISO11737-1:2018)

CEN 2/18/2018

I.S. EN ISO 11833-1:2019Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensionsand characteristics for sheets of thickness not less than 1 mm (ISO11833-1:2019)

CEN 9/15/2019

I.S. EN ISO 11930:2019Cosmetics - Microbiology - Evaluation of the antimicrobial protection of acosmetic product (ISO 11930:2019) CEN 3/3/2019

I.S. EN ISO 11963:2019Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part2: Preparation of test specimens and determination of properties (ISO/DIS23153-2:2019)

CEN 9/22/2019

I.S. EN ISO 12010:2019Water quality - Determination of short-chain polychlorinated alkanes (SCCP) inwater - Method using gas chromatography-mass spectrometry (GC-MS) andnegative-ion chemical ionization (NCI) (ISO 12010:2019)

CEN 4/28/2019

I.S. EN ISO 12183:2019Nuclear fuel technology - Controlled-potential coulometric assay of plutonium(ISO 12183:2016) CEN 6/30/2019

I.S. EN ISO 12215-5:2019Small craft - Hull construction and scantlings - Part 5: Design pressures formonohulls, design stresses, scantlings determination (ISO 12215-5:2019) CEN 6/30/2019

I.S. EN ISO 12224-3:2003Solder wire, solid and flux cored - Specifications and tests methods - Part 3:Wetting balance test method for flux cored solder wire efficacy (ISO12224-3:2003)

CEN 9/12/2003

I.S. EN ISO 12381:2019Health informatics - Explicit time-related expressions for healthcare-specificproblems (ISO 12381:2019) CEN 9/29/2019

I.S. EN ISO 12625-1:2019 Tissue paper and tissue products - Part 1: Vocabulary (ISO 12625-1:2019) CEN 6/16/2019

I.S. EN ISO 12625-11:2019Tissue paper and tissue products - Part 11: Determination of wet ball burststrength (ISO 12625-11:2019) CEN 7/26/2019

I.S. EN ISO 12718:2019 Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019) CEN 9/29/2019

I.S. EN ISO 12759-4:2019Fans - Efficiency classification for fans - Part 4: Driven fans at maximumoperating speed (ISO 12759-4:2019) CEN 11/27/2019

I.S. EN ISO 12799:2019Nuclear energy - Determination of nitrogen content in UO2, (U,Gd)O2 and(U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detectionmethod (ISO 12799:2015)

CEN 6/30/2019

I.S. EN ISO 12800:2019Nuclear fuel technology - Guidelines on the measurement of the specific surfacearea of uranium oxide powders by the BET method (ISO 12800:2017) CEN 6/30/2019

I.S. EN ISO 12813:2019Electronic fee collection - Compliance check communication for autonomoussystems (ISO 12813:2019) CEN 12/23/2019

I.S. EN ISO 12821:2019 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019) CEN 11/22/2019

I.S. EN ISO 12944-5:2019Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - Part 5: Protective paint systems (ISO 12944-5:2019) CEN 11/10/2019

I.S. EN ISO 13076:2019Paints and varnishes - Lighting and procedure for visual assessments of coatings(ISO 13076:2019) CEN 11/22/2019

I.S. EN ISO 13120:2019Health informatics - Syntax to represent the content of healthcare classificationsystems - Classification Markup Language (ClaML) (ISO 13120:2019) CEN 6/16/2019

I.S. EN ISO 13163:2019Water quality - Lead-210 - Test method using liquid scintillation counting (ISO13163:2013) CEN 6/23/2019

I.S. EN ISO 13287:2019Personal protective equipment - Footwear - Test method for slip resistance (ISO13287:2019) CEN 11/10/2019

I.S. EN ISO 13385-1:2019Geometrical product specifications (GPS) - Dimensional measuring equipment -Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) CEN 10/7/2019

I.S. EN ISO 13426-1:2019Geotextiles and geotextile-related products - Strength of internal structuraljunctions - Part 1: Geocells (ISO 13426-1:2019) CEN 12/22/2019

I.S. EN ISO 13437:2019Geosynthetics - Installing and retrieving samples in the field for durabilityassessment (ISO 13437:2019) CEN 10/7/2019

I.S. EN ISO 13468-1:2019Plastics - Determination of the total luminous transmittance of transparentmaterials - Part 1: Single-beam instrument (ISO 13468-1:2019) CEN 7/28/2019

I.S. EN ISO 13473-1:2019Characterization of pavement texture by use of surface profiles - Part 1:Determination of mean profile depth (ISO 13473-1:2019) CEN 3/31/2019

I.S. EN ISO 13485:2016Medical devices - Quality management systems - Requirements for regulatorypurposes (ISO 13485:2016) CEN 3/20/2016

I.S. EN ISO 13520:2019Determination of ferrite content in austenitic stainless steel castings (ISO13520:2015) CEN 4/14/2019

I.S. EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phasedarray technology (ISO 13588:2019)

CEN 3/24/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 13520:2019Determination of ferrite content in austenitic stainless steel castings (ISO13520:2015) CEN 4/14/2019

I.S. EN ISO 13588:2019Non-destructive testing of welds - Ultrasonic testing - Use of automated phasedarray technology (ISO 13588:2019) CEN 3/24/2019

I.S. EN ISO 13606-1:2019Health informatics - Electronic health record communication - Part 1: Referencemodel (ISO 13606-1:2019) CEN 7/21/2019

I.S. EN ISO 13606-2:2019Health informatics - Electronic health record communication - Part 2: Archetypeinterchange specification (ISO 13606-2:2019) CEN 7/21/2019

I.S. EN ISO 13606-3:2019Health informatics - Electronic health record communication - Part 3: Referencearchetypes and term lists (ISO 13606-3:2019) CEN 7/21/2019

I.S. EN ISO 13606-4:2019Health informatics - Electronic health record communication - Part 4: Security(ISO 13606-4:2019) CEN 7/21/2019

I.S. EN ISO 13606-5:2019Health informatics - Electronic health record communication - Part 5: Interfacespecification (ISO 13606-5:2019) CEN 7/21/2019

I.S. EN ISO 13666:2019 Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:2019) CEN 4/7/2019

I.S. EN ISO 13679:2019Petroleum and natural gas industries - Procedures for testing casing and tubingconnections (ISO 13679:2019) CEN 9/15/2019

I.S. EN ISO 13715:2019Technical product documentation - Edges of undefined shape - Indication anddimensioning (ISO 13715:2017) CEN 10/27/2019

I.S. EN ISO 13851:2019Safety of machinery - Two-hand control devices - Principles for design andselection (ISO 13851:2019) CEN 5/5/2019

I.S. EN ISO 13854:2019Safety of machinery - Minimum gaps to avoid crushing of parts of the humanbody (ISO 13854:2017) CEN 10/14/2019

I.S. EN ISO 13857:2019Safety of machinery - Safety distances to prevent hazard zones being reachedby upper and lower limbs (ISO 13857:2019) CEN 11/21/2019

I.S. EN ISO 13919-1:2019Electron and laser-beam welded joints - Requirements and recommendations onquality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys(ISO 13919-1:2019)

CEN 12/8/2019

I.S. EN ISO 13938-1:2019Textiles - Bursting properties of fabrics - Part 1: Hydraulic method fordetermination of bursting strength and bursting distension (ISO 13938-1:2019) CEN 12/22/2019

I.S. EN ISO 13938-2:2019Textiles - Bursting properties of fabrics - Part 2: Pneumatic method fordetermination of bursting strength and bursting distension (ISO 13938-2:2019) CEN 12/30/2019

I.S. EN ISO 14005:2019Environmental management systems - Guidelines for a flexible approach tophased implementation (ISO 14005:2019) CEN 7/28/2019

I.S. EN ISO 14064-1:2019Greenhouse gases - Part 1: Specification with guidance at the organization levelfor quantification and reporting of greenhouse gas emissions and removals (ISO14064-1:2018)

CEN 2/24/2019

I.S. EN ISO 14064-2:2019Greenhouse gases - Part 2: Specification with guidance at the project level forquantification, monitoring and reporting of greenhouse gas emission reductionsor removal enhancements (ISO 14064-2:2019)

CEN 6/2/2019

I.S. EN ISO 14064-3:2019Greenhouse gases - Part 3: Specification with guidance for the verification andvalidation of greenhouse gas statements (ISO 14064-3:2019) CEN 6/2/2019

I.S. EN ISO 14090:2019Adaptation to climate change - Principles, requirements and guidelines (ISO14090:2019) CEN 7/21/2019

I.S. EN ISO 14174:2019Welding consumables - Fluxes for submerged arc welding and electroslagwelding - Classification (ISO 14174:2019) CEN 6/2/2019

I.S. EN ISO 14245:2019Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing(ISO 14245:2019) CEN 10/7/2019

I.S. EN ISO 14405-2:2019Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2:Dimensions other than linear or angular sizes (ISO 14405-2:2018) CEN 2/10/2019

I.S. EN ISO 14414:2019 Pump system energy assessment (ISO/ASME 14414:2019) CEN 3/17/2019

I.S. EN ISO 14456:2016/A1:2019Gas cylinders - Gas properties and associated classification (FTSC) codes -Amendment 1 (ISO 14456:2015/Amd 1:2019) CEN 7/28/2019

I.S. EN ISO 14644-3:2019Cleanrooms and associated controlled environments - Part 3: Test methods(ISO 14644-3:2019) CEN 11/3/2019

I.S. EN ISO 14644-16:2019Cleanrooms and associated controlled environments - Part 16: Energy efficiencyin cleanrooms and separative devices (ISO 14644-16:2019) CEN 7/7/2019

I.S. EN ISO 14731:2019 Welding coordination - Tasks and responsibilities (ISO 14731:2019) CEN 4/14/2019

I.S. EN ISO 14780:2017/A1:2019Solid biofuels - Sample preparation - Amendment 1 (ISO 14780:2017/Amd1:2019) CEN 11/3/2019

I.S. EN ISO 14816:2005/A1:2019Road transport and traffic telematics - Automatic vehicle and equipmentidentification - Numbering and data structure - Amendment 1 (ISO14816:2005/Amd 1:2019)

CEN 5/19/2019

I.S. EN ISO 14851:2019Determination of the ultimate aerobic biodegradability of plastic materials in anaqueous medium - Method by measuring the oxygen demand in a closedrespirometer (ISO 14851:2019)

CEN 4/28/2019

I.S. EN ISO 14880-1:2019Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO14880-1:2019) CEN 7/28/2019

I.S. EN ISO 14923:2003Thermal spraying - Characterization and testing of thermally sprayed coatings(ISO 14923:2003) CEN 10/3/2003

I.S. EN ISO 14935:1998 Petroleum and related products - Determination of wick flame persistence offire-resistant fluids (ISO 14935:1998)

CEN 11/13/1998



Reference Title En Origin Body Publication D..I.S. EN ISO 14923:2003Thermal spraying - Characterization and testing of thermally sprayed coatings(ISO 14923:2003) CEN 10/3/2003

I.S. EN ISO 14935:1998Petroleum and related products - Determination of wick flame persistence offire-resistant fluids (ISO 14935:1998) CEN 11/13/1998

I.S. EN ISO 14971:2019Medical devices - Application of risk management to medical devices (ISO/FDIS14971:2019) CEN 1/10/2020

I.S. EN ISO 15002:2008/A1:2019Flow-metering devices for connection to terminal units of medical gas pipelinesystems - Amendment 1 (ISO 15002:2008/Amd 1:2018) CEN 12/8/2019

I.S. EN ISO 15023-2:2019Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination ofproperties (ISO 15023-2:2019) CEN 4/28/2019

I.S. EN ISO 15118-1:2019Road vehicles - Vehicle to grid communication interface - Part 1: Generalinformation and use-case definition (ISO 15118-1:2019) CEN 5/19/2019

I.S. EN ISO 15118-4:2019Road vehicles - Vehicle to grid communication interface - Part 4: Network andapplication protocol conformance test (ISO 15118-4:2018) CEN 3/3/2019

I.S. EN ISO 15118-5:2019Road vehicles - Vehicle to grid communication interface - Part 5: Physical layerand data link layer conformance test (ISO 15118-5:2018) CEN 3/3/2019

I.S. EN ISO 15118-8:2019Road vehicles - Vehicle to grid communication interface - Part 8: Physical layerand data link layer requirements for wireless communication (ISO15118-8:2018)

CEN 3/3/2019

I.S. EN ISO 15156-2:2015Petroleum and natural gas industries - Materials for use in H2S-containingenvironments in oil and gas production - Part 2: Cracking-resistant carbon andlow alloy steels, and the use of cast irons (ISO 15156-2:2015)

CEN 10/5/2015

I.S. EN ISO 15156-3:2015Petroleum and natural gas industries - Materials for use in H2S-containingenvironments in oil and gas production - Part 3: Cracking-resistant CRAs(corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)

CEN 10/5/2015

I.S. EN ISO 15186-1:2003Acoustics - Measurement of sound insulation in buildings and of buildingelements using sound intensity - Part 1: Laboratory measurements (ISO15186-1:2000)

CEN 10/15/2003

I.S. EN ISO 15195:2019Laboratory medicine - Requirements for the competence of calibrationlaboratories using reference measurement procedures (ISO 15195:2018) CEN 2/24/2019


I.S. EN ISO 15223-1:2016Medical devices - Symbols to be used with medical device labels, labelling andinformation to be supplied - Part 1: General requirements (ISO 15223-1:2016,Corrected version 2017-03)

CEN 1/17/2017

I.S. EN ISO 15349-2:2003Unalloyed steel - Determination of low carbon content - Part 2: Infraredabsorption method after combustion in an induction furnace (with preheating)(ISO 15349-2:1999)

CEN 9/12/2003

I.S. EN ISO 15480:2019Fasteners - Hexagon washer head drilling screws with tapping screw thread(ISO 15480:2019) CEN 7/28/2019

I.S. EN ISO 15512:2019 Plastics - Determination of water content (ISO 15512:2019) CEN 6/16/2019

I.S. EN ISO 15549:2019Non-destructive testing - Eddy current testing - General principles (ISO15549:2019) CEN 6/2/2019

I.S. EN ISO 15607:2019Specification and qualification of welding procedures for metallic materials -General rules (ISO 15607:2019) CEN 11/10/2019

I.S. EN ISO 15609-1:2019Specification and qualification of welding procedures for metallic materials -Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019) CEN 10/21/2019

I.S. EN ISO 15609-2:2019Specification and qualification of welding procedures for metallic materials -Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019) CEN 10/21/2019

I.S. EN ISO 15614-1:2017/A1:2019Specification and qualification of welding procedures for metallic materials -Welding procedure test - Part 1: Arc and gas welding of steels and arc weldingof nickel and nickel alloys - Amendment 1 (ISO 15614-1:2017/Amd 1:2019)

CEN 9/8/2019

I.S. EN ISO 15614-7:2019Specification and qualification of welding procedures for metallic materials -Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) CEN 11/27/2019

I.S. EN ISO 15620:2019 Welding - Friction welding of metallic materials (ISO 15620:2019) CEN 7/7/2019

I.S. EN ISO 15630-1:2019Steel for the reinforcement and prestressing of concrete - Test methods - Part1: Reinforcing bars, rods and wire (ISO 15630-1:2019) CEN 3/24/2019

I.S. EN ISO 15630-2:2019Steel for the reinforcement and prestressing of concrete - Test methods - Part2: Welded fabric and lattice girders (ISO 15630-2:2019) CEN 3/24/2019

I.S. EN ISO 15630-3:2019Steel for the reinforcement and prestressing of concrete - Test methods - Part3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10) CEN 3/24/2019

I.S. EN ISO 15708-1:2019Non-destructive testing - Radiation methods for computed tomography - Part 1:Terminology (ISO 15708-1:2017) CEN 4/21/2019

I.S. EN ISO 15708-2:2019Non-destructive testing - Radiation methods for Computed tomography - Part 2:Principles, equipment and samples (ISO 15708-2:2017) CEN 4/21/2019

I.S. EN ISO 15708-3:2019Non-destructive testing - Radiation methods for computed tomography - Part 3:Operation and interpretation (ISO 15708-3:2017) CEN 4/21/2019

I.S. EN ISO 15708-4:2019Non-destructive testing - Radiation methods for computed tomography - Part 4:Qualification (ISO 15708-4:2017) CEN 4/14/2019

I.S. EN ISO 15747:2019 Plastic containers for intravenous injections (ISO 15747:2018) CEN 3/24/2019

I.S. EN ISO 15867:2003Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology(ISO 15867:2003) CEN 10/3/2003

I.S. EN ISO 15995:2019 Gas cylinders - Specifications and testing of LPG cylinder valves - Manuallyoperated (ISO 15995:2019)

CEN 10/7/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 15867:2003Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology(ISO 15867:2003) CEN 10/3/2003

I.S. EN ISO 15995:2019Gas cylinders - Specifications and testing of LPG cylinder valves - Manuallyoperated (ISO 15995:2019) CEN 10/7/2019

I.S. EN ISO 16014-5:2019Plastics - Determination of average molecular weight and molecular weightdistribution of polymers using size-exclusion chromatography - Part 5:Light-scattering method (ISO 16014-5:2019)

CEN 6/30/2019

I.S. EN ISO 16054:2019Implants for surgery - Minimum data sets for surgical implants (ISO16054:2019) CEN 8/4/2019

I.S. EN ISO 16135:2006/A1:2019Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO16135:2006/Amd 1:2019) CEN 9/1/2019

I.S. EN ISO 16136:2006/A1:2019Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1(ISO 16136:2006/Amd 1:2019) CEN 9/10/2019

I.S. EN ISO 16137:2006/A1:2019Industrial valves - Check valves of thermoplastics materials - Amendment 1(ISO 16137:2006/Amd 1:2019) CEN 7/1/2019

I.S. EN ISO 16138:2006/A1:2019Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1(ISO 16138:2006/Amd 1:2019) CEN 9/1/2019

I.S. EN ISO 16139:2006/A1:2019Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO16139:2006/Amd 1:2019) CEN 9/1/2019


I.S. EN ISO 16330:2003Reciprocating positive displacement pumps and pump units - Technicalrequirements (ISO 16330:2003) CEN 9/12/2003

I.S. EN ISO 16348:2003Metallic and other inorganic coatings - Definitions and conventions concerningappearance (ISO 16348:2003) CEN 9/12/2003

I.S. EN ISO 16535:2019Thermal insulating products for building applications - Determination oflong-term water absorption by immersion (ISO 16535:2019) CEN 8/4/2019

I.S. EN ISO 16536:2019Thermal insulating products for building applications - Determination oflong-term water absorption by diffusion (ISO 16536:2019) CEN 8/11/2019

I.S. EN ISO 16581:2019Resilient and laminate floor coverings - Determination of the effect of simulatedmovement of a furniture leg (ISO 16581:2014) CEN 6/23/2019

I.S. EN ISO 16637:2019Radiological protection - Monitoring and internal dosimetry for staff membersexposed to medical radionuclides as unsealed sources (ISO 16637:2016) CEN 6/30/2019

I.S. EN ISO 16639:2019Surveillance of the activity concentrations of airborne radioactive substances inthe workplace of nuclear facilities (ISO 16639:2017) CEN 6/30/2019

I.S. EN ISO 16645:2019Radiological protection - Medical electron accelerators - Requirements andrecommendations for shielding design and evaluation (ISO 16645:2016) CEN 6/30/2019

I.S. EN ISO 16757-1:2019Data structures for electronic product catalogues for building services - Part 1:Concepts, architecture and model (ISO 16757-1:2015) CEN 6/16/2019

I.S. EN ISO 16757-2:2019Data structures for electronic product catalogues for building services - Part 2:Geometry (ISO 16757-2:2016) CEN 6/16/2019

I.S. EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017) CEN 6/23/2019

I.S. EN ISO 16812:2019Petroleum, petrochemical and natural gas industries - Shell-and-tube heatexchangers (ISO 16812:2019) CEN 3/24/2019

I.S. EN ISO 16929:2019Plastics - Determination of the degree of disintegration of plastic materialsunder defined composting conditions in a pilot-scale test (ISO 16929:2019) CEN 12/22/2019

I.S. EN ISO 17059:2019Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fattyacids for analysis by gas chromatography (Rapid method) (ISO 17059:2019) CEN 9/29/2019

I.S. EN ISO 17072-1:2019Leather - Chemical determination of metal content - Part 1: Extractable metals(ISO 17072-1:2019) CEN 4/21/2019

I.S. EN ISO 17072-2:2019Leather - Chemical determination of metal content - Part 2: Total metal content(ISO 17072-2:2019) CEN 4/21/2019

I.S. EN ISO 17201-3:2019Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations(ISO 17201-3:2019) CEN 3/17/2019

I.S. EN ISO 17226-1:2019Leather - Chemical determination of formaldehyde content - Part 1: Methodusing high performance liquid chromatography (ISO 17226-1:2018) CEN 2/24/2019

I.S. EN ISO 17226-2:2019Leather - Chemical determination of formaldehyde content - Part 2: Methodusing colorimetric analysis (ISO 17226-2:2018) CEN 2/24/2019

I.S. EN ISO 17261:2012Intelligent transport systems - Automatic vehicle and equipment identification -Intermodal goods transport architecture and terminology (ISO 17261:2012) CEN 9/20/2012

I.S. EN ISO 17262:2012/A1:2019Intelligent transport systems - Automatic vehicle and equipment identification -Numbering and data structures - Amendment 1 (ISO 17262:2012/Amd 1:2019) CEN 3/24/2019

I.S. EN ISO 17264:2009/A1:2019Intelligent transport systems - Automatic vehicle and equipment identification -Interfaces - Amendment 1 (ISO 17264:2009/Amd 1:2019) CEN 3/31/2019

I.S. EN ISO 17422:2019Plastics - Environmental aspects - General guidelines for their inclusion instandards (ISO 17422:2018) CEN 7/26/2019

I.S. EN ISO 17556:2019Plastics - Determination of the ultimate aerobic biodegradability of plasticmaterials in soil by measuring the oxygen demand in a respirometer or theamount of carbon dioxide evolved (ISO 17556:2019)

CEN 6/16/2019

I.S. EN ISO 17573-1:2019 Electronic fee collection - System architecture for vehicle-related tolling - Part 1:Reference model (ISO 17573-1:2019)

CEN 9/22/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 17556:2019

Plastics - Determination of the ultimate aerobic biodegradability of plasticmaterials in soil by measuring the oxygen demand in a respirometer or theamount of carbon dioxide evolved (ISO 17556:2019) CEN 6/16/2019

I.S. EN ISO 17573-1:2019Electronic fee collection - System architecture for vehicle-related tolling - Part 1:Reference model (ISO 17573-1:2019) CEN 9/22/2019

I.S. EN ISO 17652-1:2003Welding - Test for shop primers in relation to welding and allied processes - Part1: General requirements (ISO 17652-1:2003) CEN 9/12/2003

I.S. EN ISO 17652-2:2003Welding - Test for shop primers in relation to welding and allied processes - Part2: Welding properties of shop primers (ISO 17652-2:2003) CEN 9/12/2003

I.S. EN ISO 17652-3:2003Welding - Test for shop primers in relation to welding and allied processes - Part3: Thermal cutting (ISO 17652-3:2003) CEN 9/12/2003

I.S. EN ISO 17652-4:2003Welding - Test for shop primers in relation to welding and allied processes - Part4: Emission of fumes and gases (ISO 17652-4:2003) CEN 9/12/2003

I.S. EN ISO 17677-1:2019Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding(ISO 17677-1:2019) CEN 4/7/2019

I.S. EN ISO 17678:2019Milk and milk products - Determination of milk fat purity by gaschromatographic analysis of triglycerides (ISO 17678:2019) CEN 7/26/2019

I.S. EN ISO 17700:2019Footwear - Test methods for upper components and insocks - Colour fastness torubbing and bleeding (ISO 17700:2019) CEN 9/29/2019

I.S. EN ISO 17872:2019Paints and varnishes - Guidelines for the introduction of scribe marks throughcoatings on metallic panels for corrosion testing (ISO 17872:2019) CEN 10/21/2019

I.S. EN ISO 17892-11:2019Geotechnical investigation and testing - Laboratory testing of soil - Part 11:Permeability tests (ISO 17892-11:2019) CEN 3/17/2019

I.S. EN ISO 18218-2:2019Leather - Determination of ethoxylated alkylphenols - Part 2: Indirect method(ISO 18218-2:2019) CEN 7/28/2019

I.S. EN ISO 18243:2019Electrically propelled mopeds and motorcycles - Test specifications and safetyrequirements for lithium-ion battery systems (ISO 18243:2017) CEN 3/24/2019

I.S. EN ISO 18254-2:2019Textiles - Method for the detection and determination of alkylphenol ethoxylates(APEO) - Part 2: Method using NPLC (ISO 18254-2:2018) CEN 2/24/2019

I.S. EN ISO 18369-4:2017Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties ofcontact lens materials (ISO 18369-4:2017, Corrected version 2017-10-01) CEN 10/9/2017

I.S. EN ISO 18388:2019Technical product documentation (TPD) - Relief grooves - Types anddimensioning (ISO 18388:2016) CEN 10/21/2019

I.S. EN ISO 18416:2015Cosmetics - Microbiology - Detection of Candida albicans (ISO 18416:2015,Corrected version 2016-12-15) CEN 1/11/2016

I.S. EN ISO 18417:2019Iodine charcoal sorbents for nuclear facilities - Method for defining sorptioncapacity index (ISO 18417:2017) CEN 6/30/2019

I.S. EN ISO 18451-1:2019Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO18451-1:2019) CEN 6/16/2019

I.S. EN ISO 18473-3:2019Functional pigments and extenders for special application - Part 3: Fumed silicafor silicone rubber application (ISO 18473-3:2018) CEN 7/7/2019

I.S. EN ISO 18592:2019Resistance welding - Destructive testing of welds - Method for the fatiguetesting of multi-spot-welded specimens (ISO 18592:2019) CEN 10/7/2019

I.S. EN ISO 18640-1:2018/A1:2019Protective clothing for firefighters - Physiological impact - Part 1: Measurementof coupled heat and moisture transfer with the sweating torso - Amendment 1(ISO 18640-1:2018/Amd 1:2019)

CEN 11/22/2019

I.S. EN ISO 18640-2:2018/A1:2019Protective clothing for firefighters - Physiological impact - Part 2: Determinationof physiological heat load caused by protective clothing worn by firefighters -Amendment 1 (ISO 18640-2:2018/Amd 1:2019)

CEN 11/10/2019

I.S. EN ISO 18647:2019Petroleum and natural gas industries - Modular drilling rigs for offshore fixedplatforms (ISO 18647:2017) CEN 10/27/2019

I.S. EN ISO 18674-5:2019Geotechnical investigation and testing - Geotechnical monitoring by fieldinstrumentation - Part 5: Stress change measurements by total pressure cells(TPC) (ISO 18674-5:2019)

CEN 11/22/2019

I.S. EN ISO 18862:2019Coffee and coffee products - Determination of acrylamide - Methods usingHPLC-MS/MS and GC-MS after derivatization (ISO 18862:2016) CEN 11/22/2019

I.S. EN ISO 19014-1:2018Earth-moving machinery - Functional safety - Part 1: Methodology to determinesafety-related parts of the control system and performance requirements (ISO19014-1:2018, Corrected version 2019-02)

CEN 9/2/2018


I.S. EN ISO 19062-2:2019Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials- Part 2: Preparation of test specimens and determination of properties (ISO19062-2:2019)

CEN 4/14/2019

I.S. EN ISO 19065-2:2019Plastics - Acrylonitrile-styrene-acrylate (ASA),acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) andacrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion ..

CEN 4/14/2019

I.S. EN ISO 19085-2:2017Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawingmachines (ISO 19085-2:2017, Corrected version 2017-11-01) CEN 9/10/2017

I.S. EN ISO 19085-7:2019Woodworking machines - Safety - Part 7: Surface planing, thickness planing,combined surface/thickness planing machines (ISO 19085-7:2019) CEN 7/21/2019

I.S. EN ISO 19085-10:2019Woodworking machines - Safety - Part 10: Building site saws (contractor saws)(ISO 19085-10:2018, Corrected version 2018-11) CEN 6/23/2019

I.S. EN ISO 19107:2019 Geographic information - Spatial schema (ISO/FDIS 19107:2019) CEN 1/6/2020

I.S. EN ISO 19112:2019 Geographic information - Spatial referencing by geographic identifiers (ISO19112:2019)

CEN 4/7/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 19107:2019 Geographic information - Spatial schema (ISO/FDIS 19107:2019) CEN 1/6/2020

I.S. EN ISO 19112:2019Geographic information - Spatial referencing by geographic identifiers (ISO19112:2019) CEN 4/7/2019

I.S. EN ISO 19115-2:2019Geographic information - Metadata - Part 2: Extensions for acquisition andprocessing (ISO 19115-2:2019) CEN 2/24/2019

I.S. EN ISO 19116:2019 Geographic information - Positioning services (ISO/DIS 19116:2019) CEN 1/6/2020

I.S. EN ISO 19225:2017/A1:2019Underground mining machines - Mobile extracting machines at the face - Safetyrequirements for shearer loaders and plough systems - Amendment 1 (ISO19225:2017/Amd 1:2019)

CEN 11/10/2019

I.S. EN ISO 19296:2018Mining - Mobile machines working underground - Machine safety (ISO19296:2018) CEN 1/15/2019

I.S. EN ISO 19345-2:2019Petroleum and natural gas industry - Pipeline transportation systems -Pipelineintegrity management specification - Part 2: Full-life cycle integrity managementfor offshore pipeline (ISO 19345-2:2019)

CEN 6/30/2019

I.S. EN ISO 19353:2019 Safety of machinery - Fire prevention and fire protection (ISO 19353:2019) CEN 3/21/2019

I.S. EN ISO 19577:2019Footwear - Critical substances potentially present in footwear and footwearcomponents - Determination of Nitrosamines (ISO 19577:2019) CEN 12/22/2019

I.S. EN ISO 19900:2019Petroleum and natural gas industries - General requirements for offshorestructures (ISO 19900:2019) CEN 7/28/2019

I.S. EN ISO 19901-9:2019Petroleum and natural gas industries - Specific requirements for offshorestructures - Part 9: Structural integrity management (ISO 19901-9:2019) CEN 9/29/2019

I.S. EN ISO 19903:2019Petroleum and natural gas industries - Concrete offshore structures (ISO19903:2019) CEN 10/21/2019

I.S. EN ISO 19904-1:2019Petroleum and natural gas industries - Floating offshore structures - Part 1:Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures(ISO 19904-1:2019)

CEN 6/30/2019

I.S. EN ISO 19905-3:2019Petroleum and natural gas industries - Site-specific assessment of mobileoffshore units - Part 3: Floating unit (ISO 19905-3:2017) CEN 11/3/2019

I.S. EN ISO 19906:2019Petroleum and natural gas industries - Arctic offshore structures (ISO19906:2019) CEN 9/15/2019

I.S. EN ISO 20028-1:2019Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part1: Designation system and basis for specification (ISO 20028-1:2019) CEN 11/10/2019

I.S. EN ISO 20074:2019Petroleum and natural gas industry - Pipeline transportation systems -Geological hazards risk management for onshore pipeline (ISO 20074:2019) CEN 10/14/2019

I.S. EN ISO 20088-3:2019Determination of the resistance to cryogenic spillage of insulation materials -Part 3: Jet release (ISO 20088-3:2018) CEN 10/27/2019

I.S. EN ISO 20150:2019Footwear and footwear components - Quantitative challenge test method toassess antifungal activity (ISO 20150:2019) CEN 3/10/2019

I.S. EN ISO 20166-1:2018Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for formalin-fixed and paraffin-embedded (FFPE) tissue - Part 1:Isolated RNA (ISO 20166-1:2018)

CEN 1/15/2019

I.S. EN ISO 20166-3:2019Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for formalin-fixed and paraffin-embedded (FFPE) tissue - Part 3:Isolated DNA (ISO 20166-3:2018)

CEN 2/10/2019

I.S. EN ISO 20170:2019Geometrical product specifications (GPS) - Decomposition of geometricalcharacteristics for manufacturing control (ISO 20170:2019) CEN 6/2/2019

I.S. EN ISO 20184-2:2018Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for frozen tissue - Part 2: Isolated proteins (ISO 20184-2:2018) CEN 1/15/2019

I.S. EN ISO 20186-1:2019Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for venous whole blood - Part 1: Isolated cellular RNA (ISO20186-1:2019)

CEN 4/14/2019

I.S. EN ISO 20186-2:2019Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for venous whole blood - Part 2: Isolated genomic DNA (ISO20186-2:2019)

CEN 4/14/2019

I.S. EN ISO 20186-3:2019Molecular in-vitro diagnostic examinations - Specifications for pre-examinationprocesses for venous whole blood - Part 3: Isolated circulating cell free DNAfrom plasma (ISO 20186-3:2019)

CEN 11/10/2019

I.S. EN ISO 20238:2019 Conveyor belts - Drum friction testing (ISO 20238:2018) CEN 3/17/2019

I.S. EN ISO 20337:2019Fibre-reinforced plastic composites - Shear test method using a shear frame forthe determination of the in-plane shear stress/shear strain response and shearmodulus (ISO 20337:2018)

CEN 10/27/2019

I.S. EN ISO 20342-1:2019Assistive products for tissue integrity when lying down - Part 1: GeneralRequirements (ISO 20342-1:2019) CEN 8/4/2019

I.S. EN ISO 20349-1:2017Personal protective equipment - Footwear protecting against risks in foundriesand welding - Part 1: Requirements and test methods for protection againstrisks in foundries (ISO 20349-1:2017)

CEN 9/10/2017

I.S. EN ISO 20349-2:2017Personal protective equipment - Footwear protecting against risks in foundriesand welding - Part 2: Requirements and test methods for protection againstrisks in welding and allied processes (ISO 20349-2:2017)

CEN 9/24/2017

I.S. EN ISO 20361:2019Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy(ISO 20361:2019) CEN 9/29/2019

I.S. EN ISO 20456:2019Measurement of fluid flow in closed conduits - Guidance for the use ofelectromagnetic flowmeters for conductive liquids (ISO 20456:2017) CEN 11/3/2019

I.S. EN ISO 20504:2019Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at room temperature - Determination ofcompressive properties (ISO 20504:2019)

CEN 10/14/2019

I.S. EN ISO 20558-1:2019 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part1: Designation system and basis for specifications (ISO 20558-1:2018)

CEN 4/7/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 20504:2019

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at room temperature - Determination ofcompressive properties (ISO 20504:2019) CEN 10/14/2019

I.S. EN ISO 20558-1:2019Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part1: Designation system and basis for specifications (ISO 20558-1:2018) CEN 4/7/2019

I.S. EN ISO 20558-2:2019Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part2: Preparation of test specimen and determination of properties (ISO20558-2:2018)

CEN 4/7/2019

I.S. EN ISO 20568-1:2017Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part1: Designation system and basis for specifications (ISO 20568-1:2017) CEN 6/25/2017

I.S. EN ISO 20607:2019Safety of machinery - Instruction handbook - General drafting principles (ISO20607:2019) CEN 7/21/2019

I.S. EN ISO 20706-1:2019Textiles - Qualitative and quantitative analysis of some bast fibres (flax, hemp,ramie) and their blends - Part 1: Fibre identification using microscopy methods(ISO/FDIS 20706-1:2019)

CEN 1/6/2020

I.S. EN ISO 20789:2019 Anaesthetic and respiratory equipment - Passive humidifiers (ISO 20789:2018) CEN 10/7/2019

I.S. EN ISO 20823:2003Petroleum and related products - Determination of the flammabilitycharacteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO20823:2003)

CEN 10/15/2003

I.S. EN ISO 20846:2019Petroleum products - Determination of sulfur content of automotive fuels -Ultraviolet fluorescence method (ISO 20846:2019) CEN 10/21/2019

I.S. EN ISO 20884:2019Petroleum products - Determination of sulfur content of automotive fuels -Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019) CEN 10/21/2019

I.S. EN ISO 20896-1:2019Dentistry - Digital impression devices - Part 1: Methods for assessing accuracy(ISO 20896-1:2019) CEN 10/21/2019

I.S. EN ISO 20957-9:2016/A1:2019Stationary training equipment - Part 9: Elliptical trainers, additional specificsafety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd1:2019)

CEN 6/2/2019


I.S. EN ISO 21084:2019 Textiles - Method for determination of alkylphenols (AP) (ISO 21084:2019) CEN 3/31/2019

I.S. EN ISO 21253-1:2019Water quality - Multi-compound class methods - Part 1: Criteria for theidentification of target compounds by gas and liquid chromatography and massspectrometry (ISO 21253-1:2019)

CEN 10/21/2019

I.S. EN ISO 21253-2:2019Water quality - Multi-compound class methods - Part 2: Criteria for thequantitative determination of organic substances using a multi-compound classanalytical method (ISO 21253-2:2019)

CEN 10/21/2019





I.S. EN ISO 21301-1:2019Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part1: Designation system and basis for specifications (ISO 21301-1:2019) CEN 3/24/2019

I.S. EN ISO 21301-2:2019Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part2: Preparation of test specimens and determination of properties (ISO21301-2:2019)

CEN 3/24/2019

I.S. EN ISO 21302-1:2019Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 21302-1:2019) CEN 6/23/2019

I.S. EN ISO 21302-2:2019Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2:Preparation of test specimens and determination of properties (ISO21302-2:2019)

CEN 6/23/2019

I.S. EN ISO 21304-1:2019Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding andextrusion materials - Part 1: Designation system and basis for specifications(ISO 21304-1:2019)

CEN 5/5/2019

I.S. EN ISO 21305-1:2019Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 21305-1:2019) CEN 3/24/2019

I.S. EN ISO 21305-2:2019Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2:Preparation of test specimens and determination of properties (ISO21305-2:2019)

CEN 3/24/2019

I.S. EN ISO 21306-1:2019Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusionmaterials - Part 1: Designation system and basis for specifications (ISO21306-1:2019)

CEN 4/28/2019

I.S. EN ISO 21306-2:2019Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusionmaterials - Part 2: Preparation of test specimens and determination ofproperties (ISO 21306-2:2019)

CEN 4/28/2019

I.S. EN ISO 21309-1:2019Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusionmaterials - Part 1: Designation system and basis for specifications (ISO21309-1:2019)

CEN 4/7/2019

I.S. EN ISO 21309-2:2019Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusionmaterials - Part 2: Preparation of test specimens and determination ofproperties (ISO 21309-2:2019)

CEN 4/7/2019

I.S. EN ISO 21416:2019Recreational diving services - Requirements and guidance on environmentallysustainable practices in recreational diving (ISO 21416:2019) CEN 10/21/2019

I.S. EN ISO 21417:2019Recreational diving services - Requirements for training on environmentalawareness for recreational divers (ISO 21417:2019) CEN 10/21/2019

I.S. EN ISO 21484:2019Nuclear Energy - Fuel technology - Determination of the O/M ratio in MOXpellets by the gravimetric method (ISO 21484:2017) CEN 6/30/2019

I.S. EN ISO 21572:2019 Foodstuffs - Molecular biomarker analysis - Immunochemical methods for thedetection and quantification of proteins (ISO 21572:2019)

CEN 11/22/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 21484:2019Nuclear Energy - Fuel technology - Determination of the O/M ratio in MOXpellets by the gravimetric method (ISO 21484:2017) CEN 6/30/2019

I.S. EN ISO 21572:2019Foodstuffs - Molecular biomarker analysis - Immunochemical methods for thedetection and quantification of proteins (ISO 21572:2019) CEN 11/22/2019

I.S. EN ISO 21593:2019Ship and marine technology - Technical requirements fordry-disconnect/connect couplings for bunkering liquefied natural gas (ISO21593:2019)

CEN 9/22/2019

I.S. EN ISO 21787:2006/A1:2019Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO21787:2006/Amd 1:2019) CEN 9/10/2019

I.S. EN ISO 21877:2019Stationary source emissions - Determination of the mass concentration ofammonia - Manual method (ISO 21877:2019) CEN 10/27/2019

I.S. EN ISO 21968:2019Non-magnetic metallic coatings on metallic and non-metallic basis materials -Measurement of coating thickness - Phase-sensitive eddy-current method (ISO21968:2019)

CEN 11/3/2019

I.S. EN ISO 21970-1:2019Plastics - Polyketone (PK) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 21970-1:2019) CEN 9/22/2019

I.S. EN ISO 21970-2:2019Plastics - Polyketone (PK) moulding and extrusion materials - Part 2:Preparation of test specimens and determination of properties (ISO21970-2:2019)

CEN 9/22/2019

I.S. EN ISO 22041:2019Refrigerated storage cabinets and counters for professional use - Performanceand energy consumption (ISO 22041:2019) CEN 7/7/2019

I.S. EN ISO 22041:2019&A1:2019Refrigerated storage cabinets and counters for professional use - Performanceand energy consumption (ISO 22041:2019) CEN 11/27/2019

I.S. EN ISO 22065:2019Workplace air - Gases and vapours - Requirements for evaluation of measuringprocedures using pumped samplers (ISO 22065:2019) CEN 7/21/2019


I.S. EN ISO 22125-1:2019Water quality - Technetium-99 - Part 1: Test method using liquid scintillationcounting (ISO 22125-1:2019) CEN 12/16/2019

I.S. EN ISO 22125-2:2019Water quality - Technetium-99 - Part 2: Test method using inductively coupledplasma mass spectrometry (ICP-MS) (ISO 22125-2:2019) CEN 11/27/2019

I.S. EN ISO 22301:2019Security and resilience - Business continuity management systems -Requirements (ISO 22301:2019) CEN 11/24/2019

I.S. EN ISO 22477-1:2018Geotechnical investigation and testing - Testing of geotechnical structures - Part1: Testing of piles: static compression load testing (ISO 22477-1:2018,Corrected version 2019-03)

CEN 1/15/2019

I.S. EN ISO 22568-1:2019Foot and leg protectors - Requirements and test methods for footwearcomponents - Part 1: Metallic toecaps (ISO 22568-1:2019) CEN 5/5/2019

I.S. EN ISO 22568-2:2019Foot and leg protectors - Requirements and test methods for footwearcomponent - Part 2: Non-metallic toecaps (ISO 22568-2:2019) CEN 5/5/2019

I.S. EN ISO 22568-3:2019Foot and leg protectors - Requirements and test methods for footwearcomponents - Part 3: Metallic perforation resistant inserts (ISO 22568-3:2019) CEN 5/5/2019

I.S. EN ISO 22568-4:2019Foot and leg protectors - Requirements and test methods for footwearcomponents - Part 4: Non-metallic perforation resistant inserts (ISO22568-4:2019)

CEN 5/19/2019

I.S. EN ISO 22631:2019Adhesives - Test method for adhesives for floor and wall coverings - Peel test(ISO 22631:2019) CEN 8/11/2019

I.S. EN ISO 22632:2019Adhesives - Test method for adhesives for floor and wall coverings - Shear test(ISO 22632:2019) CEN 8/11/2019

I.S. EN ISO 22633:2019Adhesives - Test methods for adhesives for floor coverings and wall coverings -Determination of dimensional changes of a linoleum floor covering in contactwith an adhesive (ISO 22633:2019)

CEN 9/29/2019

I.S. EN ISO 22635:2019Adhesives - Test methods for adhesives for plastic or rubber floor coverings orwall coverings - Determination of dimensional changes after accelerated ageing(ISO 22635:2019)

CEN 8/18/2019

I.S. EN ISO 22637:2019Adhesives - Test of adhesive for floor covering - Determination of the electricalresistance of adhesive films and composites (ISO 22637:2019) CEN 8/18/2019

I.S. EN ISO 22700:2019Leather - Measuring the colour and colour difference of finished leather (ISO22700:2019) CEN 5/5/2019

I.S. EN ISO 22765:2019Nuclear fuel technology - Sintered (U,Pu)O2 pellets - Guidance forceramographic preparation for microstructure examination (ISO 22765:2016) CEN 6/30/2019

I.S. EN ISO 22995:2019Petroleum products - Determination of cloud point - Automated step-wisecooling method (ISO 22995:2019) CEN 6/16/2019

I.S. EN ISO 23208:2019 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017) CEN 4/14/2019

I.S. EN ISO 23500-1:2019Preparation and quality management of fluids for haemodialysis and relatedtherapies - Part 1: General requirements (ISO 23500-1:2019) CEN 4/7/2019

I.S. EN ISO 23500-2:2019Preparation and quality management of fluids for haemodialysis and relatedtherapies - Part 2: Water treatment equipment for haemodialysis applicationsand related therapies (ISO 23500-2:2019)

CEN 4/7/2019

I.S. EN ISO 23500-3:2019Preparation and quality management of fluids for haemodialysis and relatedtherapies - Part 3: Water for haemodialysis and related therapies (ISO23500-3:2019)

CEN 4/7/2019

I.S. EN ISO 23500-4:2019Preparation and quality management of fluids for haemodialysis and relatedtherapies - Part 4: Concentrates for haemodialysis and related therapies (ISO23500-4:2019)

CEN 4/7/2019

I.S. EN ISO 23500-5:2019Preparation and quality management of fluids for haemodialysis and relatedtherapies - Part 5: Quality of dialysis fluid for haemodialysis and relatedtherapies (ISO 23500-5:2019)

CEN 4/7/2019

I.S. EN ISO 23611-3:2019 Soil quality - Sampling of soil invertebrates - Part 3: Sampling and extraction ofenchytraeids (ISO 23611-3:2019)

CEN 10/21/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 23500-5:2019

Preparation and quality management of fluids for haemodialysis and relatedtherapies - Part 5: Quality of dialysis fluid for haemodialysis and relatedtherapies (ISO 23500-5:2019) CEN 4/7/2019

I.S. EN ISO 23611-3:2019Soil quality - Sampling of soil invertebrates - Part 3: Sampling and extraction ofenchytraeids (ISO 23611-3:2019) CEN 10/21/2019



I.S. EN ISO 23874:2018Natural gas - Gas chromatographic requirements for hydrocarbon dewpointcalculation (ISO 23874:2006) CEN 10/15/2018

I.S. EN ISO 23907-1:2019Sharps injury protection - Requirements and test methods - Part 1: Single-usesharps containers (ISO 23907-1:2019) CEN 3/3/2019

I.S. EN ISO 23910:2019Leather - Physical and mechanical tests - Measurement of stitch tear resistance(ISO 23910:2019) CEN 7/21/2019

I.S. EN ISO 24534-4:2010/A1:2019Automatic vehicle and equipment identification - Electronic registrationidentification (ERI) for vehicles - Part 4: Secure communications usingasymmetrical techniques - Amendment 1 (ISO 24534-4:2010/Amd 1:2019)

CEN 3/24/2019

I.S. EN ISO 24550:2019Ergonomics - Accessible design - Indicator lights on consumer products (ISO24550:2019) CEN 12/8/2019

I.S. EN ISO 24551:2019Ergonomics - Accessible design - Spoken instructions of consumer products (ISO24551:2019) CEN 12/8/2019

I.S. EN ISO 24598:2019Welding consumables - Solid wire electrodes, tubular cored electrodes andelectrode-flux combinations for submerged arc welding of creep-resisting steels- Classification (ISO 24598:2019)

CEN 6/2/2019

I.S. EN ISO 25066:2019Systems and software engineering - Systems and software QualityRequirements and Evaluation (SQuaRE) - Common Industry Format (CIF) forUsability - Evaluation Report (ISO/IEC 25066:2016)

CEN 10/21/2019

I.S. EN ISO 25177:2019 Soil quality - Field soil description (ISO 25177:2019) CEN 11/3/2019

I.S. EN ISO 25178-73:2019Geometrical product specifications (GPS) - Surface texture: Areal - Part 73:Terms and definitions for surface defects on material measures (ISO25178-73:2019)

CEN 6/30/2019

I.S. EN ISO 25178-600:2019Geometrical product specifications (GPS) - Surface texture: Areal - Part 600:Metrological characteristics for areal-topography measuring methods (ISO25178-600:2019)

CEN 4/28/2019

I.S. EN ISO 25178-607:2019Geometrical product specifications (GPS) - Surface texture: Areal - Part 607:Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO25178-607:2018)

CEN 4/28/2019

I.S. EN ISO 25424:2019Sterilization of health care products - Low temperature steam and formaldehyde- Requirements for development, validation and routine control of a sterilizationprocess for medical devices (ISO 25424:2018)

CEN 12/8/2019

I.S. EN ISO 26082-1:2019Leather - Physical and mechanical test methods for the determination of soiling- Part 1: Rubbing (Martindale) method (ISO 26082-1:2019) CEN 5/5/2019

I.S. EN ISO 27020:2019 Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019) CEN 7/21/2019

I.S. EN ISO 27065:2017/A1:2019Protective clothing - Performance requirements for protective clothing worn byoperators applying pesticides and for re-entry workers - Amendment 1:Surrogate test chemical (ISO 27065:2017/Amd 1:2019)

CEN 11/22/2019

I.S. EN ISO 27427:2019Anaesthetic and respiratory equipment - Nebulizing systems and components(ISO 27427:2013) CEN 10/7/2019

I.S. EN ISO 27501:2019 The human-centred organization - Guidance for managers (ISO 27501:2019) CEN 4/14/2019

I.S. EN ISO 28258:2013/A1:2019Soil quality - Digital exchange of soil-related data - Amendment 1 (ISO28258:2013/Amd 1:2019) CEN 11/10/2019

I.S. EN ISO 28721-1:2019Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part1: Quality requirements for apparatus, components, appliances and accessories(ISO 28721-1:2019)

CEN 11/3/2019

I.S. EN ISO 28763:2019Vitreous and porcelain enamels - Regenerative, enamelled and packed panelsfor air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2019) CEN 10/14/2019

I.S. EN ISO 28927-1:2019Hand-held portable power tools - Test methods for evaluation of vibrationemission - Part 1: Angle and vertical grinders (ISO/FDIS 28927-1:2019) CEN 1/6/2020

I.S. EN ISO 28927-4:2010/A1:2018Hand-held portable power tools - Test methods for evaluation of vibrationemission - Part 4: Straight grinders (ISO 28927-4:2010/Amd 1:2017) CEN 1/15/2019

I.S. EN ISO 28927-8:2009/A2:2019Hand-held portable power tools - Test methods for evaluation of vibrationemission - Part 8: Saws, polishing and filing machines with reciprocating actionand small saws with oscillating or rotating action - Amendment 2: Oscillating k..

CEN 7/7/2019

I.S. EN ISO 29464:2019 Cleaning of air and other gases - Terminology (ISO 29464:2017) CEN 10/27/2019

I.S. EN ISO 29767:2019Thermal insulating products for building applications - Determination ofshort-term water absorption by partial immersion (ISO 29767:2019) CEN 8/18/2019

I.S. EN ISO 29862:2019Self adhesive tapes - Determination of peel adhesion properties (ISO29862:2018) CEN 6/23/2019

I.S. EN ISO 29863:2019 Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018) CEN 6/23/2019

I.S. EN ISO 29864:2019Self adhesive tapes - Measurement of breaking strength and elongation at break(ISO 29864:2018) CEN 6/23/2019

I.S. EN ISO 29988-1:2019Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO/DIS 29988-1:2019) CEN 1/6/2020

I.S. EN ISO 34101-3:2019 Sustainable and traceable cocoa - Part 3: Requirements for traceability (ISO34101-3:2019)

CEN 6/23/2019



Reference Title En Origin Body Publication D..I.S. EN ISO 29988-1:2019Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO/DIS 29988-1:2019) CEN 1/6/2020

I.S. EN ISO 34101-3:2019Sustainable and traceable cocoa - Part 3: Requirements for traceability (ISO34101-3:2019) CEN 6/23/2019

I.S. EN ISO 34101-4:2019Sustainable and traceable cocoa - Part 4: Requirements for certificationschemes (ISO 34101-4:2019) CEN 6/23/2019

I.S. EN ISO 35101:2019Petroleum and natural gas industries - Arctic operations - Working environment(ISO 35101:2017) CEN 11/3/2019

I.S. EN ISO 35103:2019Petroleum and natural gas industries - Arctic operations - Environmentalmonitoring (ISO 35103:2017) CEN 10/21/2019

I.S. EN ISO 35106:2019Petroleum and natural gas industries - Arctic operations - Metocean, ice, andseabed data (ISO 35106:2017) CEN 10/27/2019

I.S. EN ISO 52000-1:2017Energy performance of buildings - Overarching EPB assessment - Part 1:General framework and procedures (ISO 52000-1:2017) CEN 8/13/2017

I.S. EN ISO 52003-1:2017Energy performance of buildings - Indicators, requirements, ratings andcertificates - Part 1: General aspects and application to the overall energyperformance (ISO 52003-1:2017)

CEN 8/6/2017

I.S. EN ISO 52010-1:2017Energy performance of buildings - External climatic conditions - Part 1:Conversion of climatic data for energy calculations (ISO 52010-1:2017) CEN 8/6/2017

I.S. EN ISO 52016-1:2017Energy performance of buildings - Energy needs for heating and cooling,internal temperatures and sensible and latent heat loads - Part 1: Calculationprocedures (ISO 52016-1:2017)

CEN 8/6/2017

I.S. EN ISO 52018-1:2017Energy performance of buildings - Indicators for partial EPB requirementsrelated to thermal energy balance and fabric features - Part 1: Overview ofoptions (ISO 52018-1:2017)

CEN 8/6/2017

I.S. EN ISO 52911-2:2019Additive manufacturing - Design - Part 2: Laser-based powder bed fusion ofpolymers (ISO/ASTM 52911-2:2019) CEN 11/10/2019

I.S. EN ISO 80000-2:2019 Quantities and units - Part 2: Mathematics (ISO 80000-2:2019) CEN 10/27/2019

I.S. EN ISO 80000-4:2019 Quantities and units - Part 4: Mechanics (ISO 80000-4:2019) CEN 10/27/2019

I.S. EN ISO 80000-5:2019 Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2019) CEN 10/27/2019

I.S. EN ISO 80000-9:2019Quantities and units - Part 9: Physical chemistry and molecular physics (ISO80000-9:2019) CEN 10/27/2019

I.S. EN ISO 80000-10:2019 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)CEN 10/27/2019

I.S. EN ISO 80000-12:2019 Quantities and units - Part 12: Condensed matter physics (ISO 80000-12:2019) CEN 10/27/2019

I.S. EN ISO 80079-20-1:2019Explosive atmospheres - Part 20-1: Material characteristics for gas and vapourclassification - Test methods and data (ISO/IEC 80079-20-1:2017, including Cor1:2018)

CEN 11/10/2019

I.S. EN ISO 80079-36:2016/AC:2019Explosive atmospheres - Part 36: Non-electrical equipment for explosiveatmospheres - Basic method and requirements - Technical Corrigendum 1 CEN 1/6/2020

I.S. EN ISO 80369-20:2015Small-bore connectors for liquids and gases in healthcare applications - Part 20:Common test methods (ISO 80369-20:2015) CEN 6/6/2015

I.S. EN ISO 80601-2-13:2012/A1:2019Medical electrical equipment - Part 2-13: Particular requirements for basic safetyand essential performance of an anaesthetic workstation - Amendment 1 (ISO80601-2-13:2011/Amd 1:2015)

CEN 12/8/2019

I.S. EN ISO 80601-2-13:2012/A2:2019Medical electrical equipment - Part 2-13: Particular requirements for basic safetyand essential performance of an anaesthetic workstation - Amendment 2 (ISO80601-2-13:2011/Amd 2:2018)

CEN 12/8/2019

I.S. EN ISO 80601-2-61:2019Medical electrical equipment - Part 2-61: Particular requirements for basic safetyand essential performance of pulse oximeter equipment (ISO 80601-2-61:2017,Corrected version 2018-02)

CEN 2/17/2019

I.S. EN ISO 80601-2-79:2019Medical electrical equipment - Part 2-79: Particular requirements for basic safetyand essential performance of ventilatory support equipment for ventilatoryimpairment (ISO 80601-2-79:2018)

CEN 10/7/2019

I.S. EN ISO 80601-2-80:2019Medical electrical equipment - Part 2-80: Particular requirements for basic safetyand essential performance of ventilatory support equipment for ventilatoryinsufficiency (ISO 80601-2-80:2018)

CEN 10/7/2019

I.S. EN ISO 81060-2:2019Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittentautomated measurement type (ISO 81060-2:2018) CEN 11/27/2019

I.S. EN ISO/ASTM 52902:2019Additive manufacturing - Test artifacts - Geometric capability assessment ofadditive manufacturing systems (ISO/ASTM 52902:2019) CEN 10/14/2019

I.S. EN ISO/ASTM 52907:2019Additive manufacturing - Feedstock materials - Methods to characterize metalpowders (ISO/ASTM/FDIS 52907:2019) CEN 1/6/2020

I.S. EN ISO/ASTM 52910:2019Additive manufacturing - Design - Requirements, guidelines andrecommendations (ISO/ASTM 52910:2018) CEN 10/27/2019

I.S. EN ISO/ASTM 52911-1:2019Additive manufacturing - Design - Part 1: Laser-based powder bed fusion ofmetals (ISO/ASTM 52911-1:2019) CEN 10/14/2019

I.S. EN ISO/CIE 11664-1:2019Colorimetry - Part 1: CIE standard colorimetric observers (ISO/CIE11664-1:2019) CEN 8/4/2019

I.S. EN ISO/CIE 11664-3:2019 Colorimetry - Part 3: CIE tristimulus values (ISO/CIE 11664-3:2019) CEN 9/4/2019

I.S. EN ISO/CIE 11664-4:2019 Colorimetry - Part 4: CIE 1976 L*a*b* colour space (ISO/CIE 11664-4:2019) CEN 8/4/2019

I.S. EN ISO/IEC 17029:2019 Conformity Assessment - General principles and requirements for validation andverification bodies (ISO/IEC 17029:2019)

CEN 12/8/2019



Reference Title En Origin Body Publication D..I.S. EN ISO/CIE 11664-4:2019 Colorimetry - Part 4: CIE 1976 L*a*b* colour space (ISO/CIE 11664-4:2019) CEN 8/4/2019

I.S. EN ISO/IEC 17029:2019Conformity Assessment - General principles and requirements for validation andverification bodies (ISO/IEC 17029:2019) CEN 12/8/2019

I.S. ENV 12038:2002Durability of wood and wood-based products - Wood-based panels - Method oftest for determining the resistance against wood-destroying basidiomycetes CEN 5/24/2002

I.S. I.S. EN 13819-3:2019 Hearing protectors - Testing - Part 3: Supplementary acoustic test methods CEN 11/27/2019

I.S. I.S. EN 16809-1:2019Thermal insulation products of buildings - In-situ formed products from loose-fillexpanded polystyrene (EPS) beads and bonded expanded polystyrene beads -Part 1: Specification for the bonded and loose-fill products before installation

CEN 11/27/2019

I.S. I.S. EN 61400-12-1:2017/AC:2019-12Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 1/8/2020

I.S. ISO 10001:2018Quality management -- Customer satisfaction -- Guidelines for codes of conductfor organizations ISO 6/25/2019

I.S. ISO 10005:2018 Quality management -- Guidelines for quality plans ISO 6/25/2019

I.S. ISO 31000:2018 Risk management -- Guidelines ISO 6/25/2019

II.S. EN 14960-1:2019 Inflatable play equipment - Part 1: Safety requirements and test methods CEN 6/2/2019

S.R. 54:2014/A1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) NSAI 7/17/2019

S.R. CEN ISO/TS 18090-1:2019Radiological protection - Characteristics of reference pulsed radiation - Part 1:Photon radiation (ISO/TS 18090-1:2015) CEN 9/29/2019

S.R. CEN ISO/TS 19091:2019Intelligent transport systems - Cooperative ITS - Using V2I and I2Vcommunications for applications related to signalized intersections (ISO/TS19091:2019)

CEN 7/21/2019

S.R. CEN ISO/TS 19139-1:2019Geographic information - XML schema implementation - Part 1: Encoding rules(ISO/TS 19139-1:2019) CEN 4/14/2019

S.R. CEN ISO/TS 19468:2019Intelligent transport systems - Data interfaces between centres for transportinformation and control systems - Platform independent model specifications fordata exchange protocols for transport information and control systems (ISO/T..

CEN 11/10/2019

S.R. CEN ISO/TS 19590:2019Nanotechnologies - Size distribution and concentration of inorganicnanoparticles in aqueous media via single particle inductively coupled plasmamass spectrometry (ISO/TS 19590:2017)

CEN 3/17/2019

S.R. CEN ISO/TS 21003-7:2019Multilayer piping systems for hot and cold water installations inside buildings -Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) CEN 6/16/2019

S.R. CEN ISO/TS 21083-2:2019Test method to measure the efficiency of air filtration media against sphericalnanomaterials - Part 2: Size range from 3 nm to 30 nm (ISO/TS 21083-2:2019) CEN 4/21/2019

S.R. CEN ISO/TS 21177:2019Intelligent transport systems - ITS station security services for secure sessionestablishment and authentication between trusted devices (ISO/TS 21177:2019)CEN 10/21/2019

S.R. CEN ISO/TS 21189:2019Intelligent transport systems - Cooperative ITS - Test requirements and ProtocolImplementation Conformance Statement (PICS) pro forma for CEN ISO/TS17426 (ISO/TS 21189:2019)

CEN 6/16/2019

S.R. CEN ISO/TS 21805:2019Guidance on design, selection and installation of vents to safeguard thestructural integrity of enclosures protected by gaseous fire-extinguishingsystems (ISO/TS 21805:2018)

CEN 2/10/2019

S.R. CEN ISO/TS 25107:2019 Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019) CEN 11/3/2019

S.R. CEN ISO/TS 35105:2019Petroleum and natural gas industries - Arctic operations - Material requirementsfor arctic operations (ISO/TS 35105:2018) CEN 11/10/2019

S.R. CEN/TR 10367:2019Alloyed steels - Determination of chromium content - Inductively coupledplasma optical emission spectrometric method CEN 6/30/2019

S.R. CEN/TR 12896-9:2019 Public transport - Reference data model - Part 9: Informative documentation CEN 9/8/2019

S.R. CEN/TR 13695-2:2019Packaging - Requirements for measuring and verifying the four heavy metalsand other dangerous substances present in packaging, and their release intothe environment - Part 2: Requirements for measuring and verifying dangerou..

CEN 3/3/2019

S.R. CEN/TR 15371-1:2017Safety of toys - Interpretations - Part 1: Replies to requests for interpretation ofEN 71-1, EN 71-2, EN 71-8 and EN 71-14 CEN 6/11/2017

S.R. CEN/TR 15371-2:2019Safety of toys - Interpretations - Part 2: Replies to requests for interpretation ofthe chemical standards in the EN 71-series CEN 4/21/2019

S.R. CEN/TR 15654-3:2019Railway applications - Measurement of vertical forces on wheels and wheelsets -Part 3: Approval and verification of on track measurement sites for vehicles inservice

CEN 5/19/2019

S.R. CEN/TR 15868:2018Survey on provisions valid in the place of use used in conjunction with theEuropean concrete standard and developing practice CEN 1/29/2019

S.R. CEN/TR 16411:2019 Child care articles - Compiled interpretations of CEN/TC 252 standards CEN 5/19/2019

S.R. CEN/TR 16798-2:2019Energy performance of buildings - Ventilation for buildings - Part 2:Interpretation of the requirements in EN 16798-1 - Indoor environmental inputparameters for design and assessment of energy performance of buildings add..

CEN 5/19/2019

S.R. CEN/TR 16829:2016+AC:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 5/16/2019

S.R. CEN/TR 16832:2015Selection, use, care and maintenance of personal protective equipment forpreventing electrostatic risks in hazardous areas (explosion risks) CEN 5/9/2015

S.R. CEN/TR 16999:2019 Solar energy systems for roofs - Requirements for structural connections tosolar panels

CEN 3/17/2019



Reference Title En Origin Body Publication D..S.R. CEN/TR 16832:2015Selection, use, care and maintenance of personal protective equipment forpreventing electrostatic risks in hazardous areas (explosion risks) CEN 5/9/2015

S.R. CEN/TR 16999:2019Solar energy systems for roofs - Requirements for structural connections tosolar panels CEN 3/17/2019

S.R. CEN/TR 17222:2019Textile products and nanotechnologies - Guidance on tests to simulatenanoparticle release - Skin exposure CEN 4/21/2019

S.R. CEN/TR 17297-1:2019Intelligent transport systems - Location referencing harmonization for Urban ITS- Part 1: State of the art and guidelines CEN 6/16/2019

S.R. CEN/TR 17309:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CEN 6/9/2019

S.R. CEN/TR 17310:2019 Carbonation and CO2 uptake in concrete CEN 2/17/2019

S.R. CEN/TR 17311:2019Public transport - Interoperable fare management system - Bluetooth lowenergy ticketing use cases and guidelines CEN 2/17/2019

S.R. CEN/TR 17315:2019Railway applications - Braking - Calculations for the estimation of stoppingdistance for specific Wheel Slide Protection testing CEN 3/24/2019

S.R. CEN/TR 17320:2019Railway applications - Infrastructure - Determination of laboratory testparameters for assessing the mechanical durability of rail fastening systems -Complementary element

CEN 2/24/2019

S.R. CEN/TR 17330:2019Guidelines for selection, use, care and maintenance of protective clothingagainst foul weather, wind and cold CEN 3/17/2019

S.R. CEN/TR 17341:2019 Bio-based products - Examples of reporting on sustainability criteria CEN 3/17/2019

S.R. CEN/TR 17345:2019Waste - State-of-the-art document - Halogens and sulfur by oxidativepyrohydrolytic combustion followed by ion chromatography detection CEN 3/3/2019

S.R. CEN/TR 17365:2019 Method for the determination of C3A in the clinker from cement analysis CEN 6/9/2019

S.R. CEN/TR 17370:2019 Public transport - Operating raw data and statistics exchange CEN 7/21/2019

S.R. CEN/TR 17373:2019Railway applications - Railway rolling stock - Investigation of vehicles positionon the reverse curve tracks during running and calculation of buffer overlap CEN 10/7/2019

S.R. CEN/TR 17376:2019Textiles - Safety of children's clothing - Guidance on the use of EN 14682:2014Cords and drawstrings on children's clothing - Specifications CEN 7/7/2019

S.R. CEN/TR 17386:2019Postal services - Transit time measurement for cross border postal items usingreal mail feasibility study CEN 9/22/2019

S.R. CEN/TR 17421:2019Animal feeding stuffs: Methods of sampling and analysis - Recommendations forthe organization and evaluation of collaborative studies for multi-analytemethods of analysis

CEN 10/14/2019

S.R. CEN/TR 17426:2019 Sanitary appliances - Drainage systems for the application of sanitary appliancesCEN 10/27/2019

S.R. CEN/TR 419210:2019Applicability of CEN Standards to Qualified Electronic Seal Creation Device underthe EU Regulation NÂ°910/2014 (eIDAS) CEN 3/31/2019

S.R. CEN/TS 1451-2:2019Plastic piping systems for soil and waste discharge (low and high temperature)within the building structure - Polypropylene (PP) - Part 2: Guidance for theassessment of conformity

CEN 12/22/2019

S.R. CEN/TS 1852-2:2019Plastics piping systems for non-pressure underground drainage and sewerage -Polypropylene (PP) - Part 2: Guidance for the assessment of conformity CEN 12/23/2019

S.R. CEN/TS 13476-4:2019Plastics piping systems for non-pressure underground drainage and sewerage -Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity

CEN 12/22/2019

S.R. CEN/TS 16459:2019External fire exposure of roofs and roof coverings - Extended application of testresults from CEN/TS 1187 CEN 11/24/2019

S.R. CEN/TS 16769:2019 LPG equipment and accessories - Terminology CEN 6/14/2019

S.R. CEN/TS 16794-1:2019Public transport - Communication between contactless readers and fare media -Part 1: Implementation requirements for ISO/IEC 14443 CEN 11/10/2019

S.R. CEN/TS 16794-2:2019Public transport - Communication between contactless readers and fare media -Part 2: Test plan for ISO/IEC 14443 CEN 11/10/2019

S.R. CEN/TS 17061:2019Foodstuffs - Guidelines for the calibration and quantitative determination ofpesticide residues and organic contaminants using chromatographic methods CEN 9/22/2019

S.R. CEN/TS 17062:2019Foods of plant origin - Multimethod for the determination of pesticide residuesin vegetable oils by LC-MS/MS (QuOil) CEN 9/22/2019

S.R. CEN/TS 17154-1:2019Electronic fee collection - Evaluation of implementation for conformity toCEN/TS 16986 - Part 1: Test suite structure and purposes CEN 5/26/2019

S.R. CEN/TS 17154-2:2019Electronic fee collection - Evaluation of implementation for conformity toCEN/TS 16986 - Part 2: Abstract test suite CEN 5/26/2019

S.R. CEN/TS 17165:2018 Light and lighting - Lighting system design process CEN 1/15/2019

S.R. CEN/TS 17176-3:2019Plastics piping systems for water supply and for buried and above grounddrainage, sewerage and irrigation under pressure - Oriented unplasticizedpoly(vinyl chloride) (PVC-O) - Part 3: Fittings

CEN 5/5/2019

S.R. CEN/TS 17241:2019Intelligent transport systems - Traffic management systems - Status, fault andquality requirements CEN 4/21/2019

S.R. CEN/TS 17249-4:2019 Intelligent transport systems - eSafety - Part 4: eCall for UNECE Category T, R,S agricultural/forestry vehicles

CEN 3/10/2019



Reference Title En Origin Body Publication D..S.R. CEN/TS 17241:2019Intelligent transport systems - Traffic management systems - Status, fault andquality requirements CEN 4/21/2019

S.R. CEN/TS 17249-4:2019Intelligent transport systems - eSafety - Part 4: eCall for UNECE Category T, R,S agricultural/forestry vehicles CEN 3/10/2019

S.R. CEN/TS 17249-5:2019Intelligent transport systems - eSafety - Part 5: eCall for UNECE Category L1and L3 powered two-wheeled vehicles CEN 3/31/2019

S.R. CEN/TS 17249-6:2019Intelligent transport systems - eSafety - Part 6: eCall for UNECE Category L2,L4, L5, L6 and L7 tricycles and quadricycles CEN 3/31/2019

S.R. CEN/TS 17268:2018Intelligent transport systems - ITS spatial data - Data exchange on changes inroad attributes CEN 1/15/2019

S.R. CEN/TS 17286:2019 Stationary source emissions - Mercury monitoring using sorbent traps CEN 3/31/2019

S.R. CEN/TS 17287:2019 Requirements and test methods for electronic cigarette devices CEN 2/3/2019

S.R. CEN/TS 17297-2:2019Intelligent transport systems - Location Referencing Harmonisation forUrban-ITS - Part 2: Transformation methods CEN 10/14/2019

S.R. CEN/TS 17303:2019Foodstuffs - DNA barcoding of fish and fish products using definedmitochondrial cytochrome b and cytochrome c oxidase I gene segments CEN 4/14/2019

S.R. CEN/TS 17305:2019Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for saliva - Isolated human DNA CEN 4/21/2019

S.R. CEN/TS 17307:2019Material derived from End-of-Life tyres - Granulates and powders - Elastomersidentification: Gas-chromatography and mass-spectrometric detection ofpyrolysis products in solution

CEN 4/14/2019

S.R. CEN/TS 17308:2019Materials produced from end of life tyres - Steel wire - Determination of thenon-metallic content CEN 4/21/2019

S.R. CEN/TS 17312:2019 Intelligent transport systems - eSafety - eCall via satellite CEN 4/28/2019

S.R. CEN/TS 17313:2019Intelligent transport systems - ESafety - Interoperability and user choice in eCallaftermarket and third party eCall services CEN 4/14/2019

S.R. CEN/TS 17329-1:2019Foodstuffs - General guidelines for the validation of qualitative real-time PCRmethods - Part 1: Single-laboratory validation CEN 4/28/2019

S.R. CEN/TS 17329-2:2019Foodstuffs - General guidelines for the validation of qualitative real-time PCRmethods - Part 2: Collaborative study CEN 4/28/2019

S.R. CEN/TS 17331:2019Construction products: Assessment of release of dangerous substances -Content of organic substances - Methods for extraction and analysis CEN 5/26/2019

S.R. CEN/TS 17332:2019Construction products: Assessment of release of dangerous substances -Analysis of organic substances in eluates CEN 5/26/2019

S.R. CEN/TS 17337:2019Stationary source emissions - Determination of mass concentration of multiplegaseous species - Fourier transform infrared spectroscopy CEN 6/23/2019

S.R. CEN/TS 17338:2019Liming materials - Determination of the lime requirement in soil - Ammoniumacetate buffer method pH 5,5 CEN 5/19/2019

S.R. CEN/TS 17342:2019Road restraint systems - Motorcycle road restraint systems which reduce theimpact severity of motorcyclist collisions with safety barriers CEN 6/30/2019

S.R. CEN/TS 17363:2019Intelligent transport systems - ECall optional additional data - Linked mobilephone number data concept CEN 9/15/2019

S.R. CEN/TS 17378:2019Intelligent transport systems - Urban ITS - Air quality management in urbanareas CEN 10/27/2019

S.R. CEN/TS 17380:2019Intelligent transport systems - Urban-ITS - 'Controlled Zone' management forUVARs using C-ITS CEN 11/3/2019

S.R. CEN/TS 17385:2019 Method for condition assessment of immobile constructed assets CEN 11/24/2019

S.R. CEN/TS 17395:2019Intelligent transport systems - eSafety - eCall for automated and autonomousvehicles CEN 12/16/2019

S.R. CEN/TS 419221-6:2019Conditions for use of EN 419221-5 as a qualified electronic signature or sealcreation device CEN 4/14/2019

S.R. CLC IEC/TR 61508-0:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/12/2019



S.R. CLC IEC/TR 62453-51-150:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/5/2019




S.R. CLC IEC/TR 62453-52-150:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 3/5/2019



Reference Title En Origin Body Publication D..S.R. CLC IEC/TR 62453-52-90:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 3/5/2019


S.R. CLC IEC/TR 62461:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 6/18/2019

S.R. CLC/TR 50600-99-1:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 8/7/2019







S.R. CLC/TR IEC 62453-41:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/30/2019


S.R. CLC/TR IEC 62453-51-10:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/30/2019


S.R. CLC/TS 50238-3:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 9/26/2019

S.R. CLC/TS 50586:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 11/26/2019



S.R. CLC/TS IEC 60079-39:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/2/2019

S.R. CWA 17349:2019 Engineering materials - Electronic data interchange - Mechanical test data CEN 12/30/2019

S.R. CWA 17357:2019Urban search and rescue (USaR) robotic platform technical and proceduralinteroperability - Guide CEN 3/17/2019

S.R. CWA 17369:2019Authenticity and fraud in the feed and food chain - Concepts, terms, anddefinitions CEN 2/10/2019

S.R. CWA 17377:2019Design and Construction Codes for Gen II to IV nuclear facilities (pilot case forprocess for evolution of AFCEN codes) CEN 2/24/2019

S.R. CWA 17379:2019General guideline on real drive test methodology for compiling comparableemission data CEN 2/17/2019

S.R. CWA 17381:2019 The Description and Assessment of Good Practices for Smart City solutions CEN 3/17/2019

S.R. CWA 17384:2019 Articulated industrial robots - Elastostatic compliance calibration CEN 8/4/2019

S.R. CWA 17431:2019Principles and guidance for licensing Standard Essential Patents in 5G and theInternet of Things (IoT), including the Industrial Internet CEN 6/30/2019

S.R. CWA 17433:2019Mapping of Future needs of standardisation in the paper and board sector forfood contact applications CEN 7/21/2019

S.R. CWA 17437:2019Innovative and adaptable envelopes over existing faÃ§ades in buildingrefurbishment - Design, economic assessment, logistics and installationguidelines

CEN 7/21/2019

S.R. CWA 17453:2019 Bionic Aircraft - Optimized ALM support structures made from Al alloys CEN 9/29/2019

S.R. CWA 17454:2019Bionic Aircraft - Quality control of metal ALM parts using the UltrasonicTechnique CEN 9/29/2019

S.R. CWA 17486:2019 Verification of performance levels of Galileo Enabled mass-market receivers CEN 1/6/2020

S.R. CWA 17493:2019 Journalism Trust Initiative CEN 1/6/2020

S.R. CWA 95000:2019 Core Principles and Approaches for Licensing of Standard Essential Patents CEN 6/30/2019

S.R. HD 605-S3:2019 Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions)

CENELEC 8/27/2019



Reference Title En Origin Body Publication D..S.R. CWA 95000:2019 Core Principles and Approaches for Licensing of Standard Essential Patents CEN 6/30/2019

S.R. HD 605-S3:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 8/27/2019

S.R. HD 629-1-S3:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/9/2019

S.R. HD 60364-4-41:2017/A12:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 9/19/2019


S.R. HD 60364-7-711:2019Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 4/30/2019



S.R. HD 60364-8-1:2019/AC:2019-06Characterization of waste - Leaching behaviour test - Up-flow percolation test(under specified conditions) CENELEC 7/2/2019




Documents

NSAI - Standards Publications NSAI WEB Report Date of ...€¦ · Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings