Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
2 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Metalworking Tools for Marine, Bridge,Pipeline and Process Industries
CS Unitec's Trelawny™ line of surface preparation tools features many Vibro-Lo™ models.These models include integrated vibration reduction technology to operate with 7x lessvibration than standard models. Vibration damping components offset the hammer vibrationwhen the tool impacts the workpiece, reducing the risk of vibration-related injury.
Hand-Held Scaling Hammers (Pneumatic) p. 5
• Low-Vibration Single-Head and Triple-Head Scaling Hammers
• Remove thick scale, heavy corrosion, hard coatings and more
• Optional spark-resistant copper beryllium cutter heads
Low-Vibration Needle/Chisel Scalers (Pneumatic) p. 6-9
• Vibro-Lo™ Needle/Chisel Scalers remove coatings, corrosion and other accumulated materials
• Clean and stress-relieve weld seams and joints
• Variety of needles and chisels, including options for use in hazardous areas and Ex zones
Vibro-Lo™Vibration Reduction
Technology
Long-Reach Chisels / Scrapers / Scalers (Pneumatic) p. 10
• Available in lengths ranging from 2' to 6'; chip, scrape and descale with one tool
Surface Preparation Tools & Dust Collection Vacuums
Low-Vibration Steel Deck Hammer (Pneumatic) p. 11
• 11 heads and 33,000 blows per minute• Fracture and reduce scale, corrosion and thick coatings in minutes,
reducing blast media costs
• Ideal for ship decks, tank bottoms, bridge decks, floating platforms and more
Floor Scarifiers / Planers (Electric • Pneumatic • Gas) p. 12
• Ideal for the most demanding surface preparation and material removal applications
• Remove rust, scale, paint, adhesives and more from steel and concrete
Trident Neptune Flexible Shaft Deck Descalers (Air • Electric) p. 13
• Rapidly remove scale, rust, paint and other unwanted deposits on ship decks and othermetal surfaces
Hydraflex Hold Cleaning Gun Kit (Pneumatic) p. 14
• Reach up to 100 ft. away with high-pressure water jet
• Clean hold areas on bulk carriers and cargo vessels of all sizes
• Wet/Dry air-powered models collect dry dust/debris and non-flammable liquids
• ATEX classified, antistatic vacuum and air-supply hose; optional HEPA filter
• Electric-powered wet/dry models with HEPA filtration
Hand-Held Scarifiers – Rotopeen™ (Pneumatic • Electric) p. 4
Dust Collection Vacuums (Pneumatic • Electric) p. 15
• Ideal alternative to small-area shot blasting
• Clean and prepare steel and concrete surfaces
• Available with 3M's Rotopeen™ 'C' flaps, star cutters and beam cutters
Vibro-Lo™Vibration Reduction Technology
Vibro-Lo™Vibration Reduction Technology
Vibro-Lo™Vibration Reduction Technology
3• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Reaming, Drilling, Driving, Sawing & More
Reamers, Drills and Drive Motors (Air • Electric • Hydraulic) p. 16Bridge reaming and heavy-duty drilling applications in steel and other metals, as well as tube rolling, tube expanding, tapping, valve turning and more.
Portable Beveling Machines (Electric) p. 17Bevel, deburr and chamfer and prepare weld seams on plate and pipe. Portable machines for 30˚, 45˚ or 2.5 mm bevels, as well as 15˚ to 60˚ continuously adjustable angles.
Dry Cutting Circular Saws (Electric • Pneumatic) p. 18-19Fast, portable, burr-free cutting of metal plates, pipes and profiles. Models up to 14".
Portable Reciprocating Saws (Pneumatic • Hydraulic) p. 20-21Hand-held or clamp-on cutting in tough environments – fast cutting of pipe, structural steel, bolts, nails, pallets and other material.
AirPac Dryer / Cleaner • Hydraulic Power Unit p. 21Portable Band Saws (Air • Electric • Hydraulic) p. 22Fast, on-site cold cutting of pipe up to 8-1/2" diameter.
Power Hacksaws (Air • Electric • Hydraulic) p. 23Cold cutting of large pipe up to 30" diameter and structural steel – on site.
Chain Saws (Air • Hydraulic) p. 24Bar lengths of 10" to 25"; cut wood, plastic and more.
Underwater / Subsea Tools (Hydraulic • Pneumatic) p. 25Reduced Sparking Diamond Grinding & Cutting Discs p. 26Reduce sparks, dust and material waste when grinding and cutting steel, stainlesssteel, aluminum, titanium, fiberglass and more. Last 100x longer than resin bonded wheels.
Explosion-Proof Axial Fans and Air Movers (Air • Electric) p. 27Highly efficient units for ventilating, exhausting and cooling.
Non-Sparking and Non-Magnetic Safety Hand Tools p. 28-29For use in hazardous environments and all ATEX and Ex Zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present.
Portable Magnetic Drills (Electric • Pneumatic • Hydraulic) p. 30-33Fast, accurate hole cutting up to 5-1/8" dia., twist drilling up to 1-3/4" dia., tapping up to 1-5/8" dia. and more.
Linear Grinders and Pipe Sanders (Electric • Pneumatic) p. 34Grind flat surfaces and pipes up to 14" from coarse to shadow-free matte finish, up to a mirror polish. Remove welds, deep scratches, oxidation and rust.
HIPPO Mixing Station and Mixing Drills (Electric • Pneumatic) p. 35Mix, transport and pour with one unit. Hand-held units and portable stands also available.
WarrantyProducts of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase. This warranty does not apply tonormal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized Service Representatives.If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center, transportationprepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.CS Unitec, Inc.'s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product. There are no other warrantiesexpressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting only the cost or expense of repairor replacement as described above.
SafetyOperators of any power tool should use appropriate safety precautions for work being performed. This includes safety chains, eye protection, hearing protection,gloves and more. Follow instructions included in operating manual.
CS Unitec's Trelawny™ Rotopeen™ hand-held scarifiersare the ideal alternative to small-area shot blasting forcleaning and preparing steel and concrete surfaces. They utilize 3M's brand of Rotopeen™ 'C' flaps to offer a captive shot method of surface preparation.
• Pneumatic and electric models
• Integrated dust shroud for dust and debriscollection, as well as cleaner, safer removal oflead-based paints and contaminated particles
Peening Preparation Tool (PPT) – idealalternative to small-area shot blasting
Pneumatic Hand-Held Scarifiers
194.0205
194.C205
194.0405
194.C405
30
30
30
30
2700
2700
2700
2700
3.5
6.0
3.1
4.6
ModelNumber
CFM @90 PSI
Speed(RPM)
2"
2"
4"
4"
CuttingWidth
'C' Flaps
Star Cutters
'C' Flaps
Star Cutters
These models are compatiblewith Star Cutters, Beam Cutters
and Rotopeen™ 'C' Flaps
CuttingMedia
7.5
11.5
9
13.25
Weight(lbs.)
VibrationLevels m/s2
Electric Hand-Held Scarifiers
195.1215
195.1220
110V
220V
2000
2000
3.6
3.6
ModelNumber Motor Power
Speed(RPM)
2"
2"
CuttingWidth
'C' Flaps
'C' Flaps
CuttingMedia
10
10
Weight(lbs.)
VibrationLevels m/s2
Applications include:• Aggressive removal of alkyds, adhesives,lead-based paints, mastics, coatingscorrosion and more• Cleaning and preparing steel andconcrete surfaces
Electric Model 195.1220 2" cutting width with Rotopeen™ 'C' flaps
Pneumatic Models 194.0405 and194.C405, 4" cutting width
See page 15 for dustextraction systems.
4 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Hand-Held Scarifiers - Rotopeen™ Air • Electric
Star Cutter Beam Cutter 3M™ Rotopeen™ 'C' FlapP/N 312.S200 P/N 312.R200 P/N 312.MRPC
Hand-Held Scarifier Accessories
HEAVYSCALING
LIGHTBURNISHING
Nuclear
Ships decks
Construction
Factory Floors
Swimming Pools
Bridge Maintenance
Pipeline Maintenance
––––
Non-slip coatings
Plaster removal
––––
Adhesive removal
Sealant removal
––––
––––
––––
Ceiling / wall paint removal
Floor marking removal
Adhesive removal
––––
––––
Radioactive waste removal/capture
General paint removal
Ceiling / wall paint removal
Floor marking removal
––––
Paint / sealant removal
Protective coating removal
Aggressive removalof thick coatings
Removal of hard coatings, lessaggressive than star cutter
Removal of light paint and rust to bare metal finish
Star CutterCuttingWidth
2"4"
QuantityRequired
80160
Beam CutterCuttingWidth
2"4"
QuantityRequired
56112
Rotopeen™'C' Flap
CuttingWidth
2"4"
QuantityRequired
612
CS Unitec's Trelawny™ line of pneumatic hand-heldscaling hammers are ideal tools for the removal of thickscale, heavy corrosion and hard coatings. Areas ofapplication include pipes, ship decks, oil platforms,storage tanks and bridge structures.
• Single-head scaling hammer includes Vibro-Lo™ vibrationreduction technology
• Optional spark-resistant copper beryllium replacement headsreduce risk of explosion in potentially hazardous areas
• Detachable taper fit cutter head reduces cost of replacementand extends piston life
Remove thick scale, heavycorrosion and hard coatings
Applications Include:• Pipes• Ship Decks• Oil Platforms• Storage Tanks• Bridge Structures
Pneumatic Hand-Held Scaling Hammers
Cruciform
Vibro-Lo™Vibration Reduction
Technology
5• 1-800-700-5919 • Visit our Web site at www.csunitec.com
CS Unitec's Trelawny™ Single-HeadHand-Held scaler operates with 7x lessvibration than standard models. This toolutilizes vibration damping components tooffset the hammer vibration created whenthe head impacts the workpiece.
Pneumatic
Hand-Held Scaling Hammer AccessoriesPart No.
426.5351
606.5303
426.5352
612.5301
For Model Numbers
151.5100, 196.5095and 153.5300
151.5110 and 153.5310
151.5105 and 153.5305
All models shown below
TCT CruciformCutter Head
Copper Beryllium(CuBe) Cruciform Cutter Head
Bush Cutter Head
Common TaperedPiston
Vibro-Lo™
Pneumatic Hand-Held Scaling Hammers
Low-VibrationSingle Head
Triple Head
TCT Cruciform Piston
Bush Hammer Piston
CuBe Cruciform Piston
TCT Cruciform Piston
TCT Cruciform Piston
Bush Hammer Piston
CuBe Cruciform Piston
151.5100
151.5105
151.5110
196.5095
153.5300
153.5305
153.5310
5.5
5.5
5.5
5.5
8
8
8
3000
3000
3000
3000
9000
9000
9000
7
7
7
7
7
7
7
88.1
88.1
88.1
88.1
88.1
88.1
88.1
6.8
6.8
6.8
3.7
13.4
13.4
13.4
19" x 6"
19" x 6"
19" x 6"
19" x 5.5"
19" x 6"
19" x 6"
19" x 6"
DescriptionModelModelNumber
Weight(lbs.)
Dimensions(LxH)
Blows per
minuteCFM @90 PSI
Noise Leveldb(A)
VibrationLevelsm/s2
SingleHead
Vibro-Lo™
Pneumatic Hand-Held Scaling Hammers
Copper Berylliumfor use in potentiallyexplosive areas
H
H
H
Bush
VL223
VL203
CS Unitec's Trelawny™ line of Low-Vibration needle/chiselscalers offer high performance and low vibration forgreater productivity and improved operator comfort.Ergonomically designed with low maintenance and quickchange tooling option.
CS Unitec's Trelawny™ Vibro-Lo™ line of Needle/ChiselScalers operate with 7x lessvibration than standardmodels. These tools utilizevibration damping componentsto offset the hammer vibrationcreated when the needles/chiselsimpact the workpiece.
• Integrated Vibro-Lo™ vibration reduction technology
• Lightweight, easy to handle
• Optional dust shroud for dust and debris collection
• Tool-free needle changeover
• Converts to chisel scaler in seconds
High power with low vibration –equipped with Vibro-Lo™
Applications include:• Cleaning and stress-relieving weld seams and joints• Removing coatings, corrosion and other accumulated materials• Texturing concrete• Splitting, chipping, pointing and brick raking
VL303
Needle Scalers andChisel Scalers convert in
seconds with optionalhead or when purchased
as a Kit. See followingpage for Kit information.
6
Low-Vibration Needle/Chisel Scalers Vibro-Lo™Vibration Reduction
Technology
Dust CollectionShroud
CS Unitec's Vibro-Lo™ Needle/Chisel Scalers are a safer, more effectivemeans of removing coatings, corrosion and other accumulated materials.Vibro-Lo reduces the risk of vibration-related injury.
Chisel for light surface marking
Flat for light treatmentand polishing effect
Pointed for veryhard scale
Copper Berylliumfor use in potentiallyexplosive areas
Stainless Steel for usein applications wherecorrosion or humidity is aproblem, such as foodprocessing industry
See page 9 for thefollowing types ofneedles:
Chisels for Vibro-Lo™ Chisel Scalers
Dust Collection Shroud for Vibro-Lo™ Needle Scalers
Shank Length Width Application
Pistol
VL223 Needle Scaler
VL223 Needle Scalerwith dust shroud
Chisel Part Number
Square
SquareCranked End
Square
Square
Square
7"
7"
7"
7"
10"
2"
3/8"
3/4"
2-1/2"
3/4"
Spark resistant Aluminum Bronzefor use in hazardousareas
Weld flux and thick coating removal
Weld splatter removal
Wide flat chisel forthe removal of rustor peeling paint
Flat chisel for weldsplatter and sand cast cleaning
704.3110
704.3205
704.3101
704.3103
704.3107
DescriptionGripModelNumber
Needle Quantity/Diameter
Weight(lbs.)
Blows per
minuteCFM @90 PSI
Noise Leveldb(A)
VibrationLevelsm/s2
Optional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.Model VL223 Needle Scaler – Order Dust Shroud P/N 418.2003Model VL203 Needle Scaler – Order Dust Shroud P/N 418.2003Model VL303 Needle Scaler – Order Dust Shroud P/N 418.3003
VL223 Kit – Order P/N 199.2113VL203 Kit – Order P/N 199.2013VL303 Kit – Order P/N 199.3103
CS Unitec offers Vibro-Lo™ Needle/Chisel Scaler Kits, each supplied with the Needle Scaler, 3mm needles, a chisel holder, anvil and a 3/4" blade chisel.
Vibro-Lo™ Needle Scalers
Vibro-Lo™ Chisel Scalers Vibro-Lo™ Needle/Chisel Scaler Kits
CS Unitec offers a drop protection kit for our Vibro-Lo™ Needle/ Chisel Scalers. Protect your investment when working at heights or in applications where dropping/ losing the tool is likely, including: offshore platforms and rigs, bridges/ scaffolding, vessels and ships.
For VL223 and VL203Order P/N 720.2003*
For VL303Order P/N 720.3003** Safety clip and line not supplied
Drop Protection Kit
Inline
Pistol
VL223 Chisel Scaler
VL203 Chisel Scaler
VL303 Chisel Scaler
199.2213
199.2203
199.3203
6.5
7
9.5
2400
2400
3000
4
4
5.5
76.3
76.3
78.2
3.69
3.33
3.7
DescriptionGripModelNumber
Weight(lbs.)
Blows per
minuteCFM @90 PSI
Noise Leveldb(A)
VibrationLevelsm/s2
Inline
H
H
199.2103
139.2103
199.2003
139.2003
199.3003
139.3003
19 / 3mm
19 / 3mm
19 / 3mm
19 / 3mm
28 / 3mm
28 / 3mm
5.25
5.25
6
6
7.75
7.75
2400
2400
2400
2400
3000
3000
4
4
4
4
5.5
5.5
90.7
90.7
90.7
90.7
109.5
109.5
2.56
2.56
2.75
2.75
2.3
2.3
VL203 Needle Scaler
VL203 Needle Scalerwith dust shroud
VL303 Needle Scaler
VL303 Needle Scalerwith dust shroud
CS Unitecoffers a fullline of non-sparking,non-magneticchisels andsafety handtools forhazardousareas and Exzones.Contact usfor details.
See page 15 for dustextraction systems.
7• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Vibro-Lo™Vibration Reduction
Technology
Low-Vibration Needle/Chisel Scalers
8 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Standard Needle/Chisel Scalers
Chisel for light surface marking
Flat for light treatmentand polishing effect
Pointed for veryhard scale
Copper Berylliumfor use in potentiallyexplosive areas
Stainless Steel for usein applications wherecorrosion or humidity is a problem, such as the food processing industry
See page 9 forneedles:
Chisels for Standard Chisel Scalers1/2" Square Connection
Shank Length Width Application
Pistol
SemiPistol
1B Needle Scaler1B Chisel Scaler
2B Needle Scaler2B Chisel Scaler
Square
SquareCranked End
Square
Square
Square
Square
Square
7"
7"
7"
7"
10"
8"
7"
2"
3/8"
3/4"
2-1/2"
3/4"
1/4"
Moil Point
Spark-resistant Aluminum Bronzefor use in hazardous areas
Weld flux and thick coating removal
Weld splatter removal
Wide flat chisel for the removalof rust or peeling paint
Flat chisel for weld splatterand sand cast cleaning
Mortar removal for repointingbrick work
Concrete chipping
704.1110
704.2105
704.1101
704.1103
704.1107
704.1106
704.1112
DescriptionGripModelNumber
Needle Qty./Dia.
Weight(lbs.)
Blows per
minuteCFM @90 PSI
Noise Leveldb(A)
VibrationLevelsm/s2
Dust Collection Shroud for Standard Needle ScalersOptional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.Model 2B and 2BPG Needle Scalers – Order Dust Shroud P/N 418.2199Model 3BPG Needle Scaler – Order Dust Shroud P/N 418.3039
* 3BPG Chisel Scaler 135.3395 has 5/8" hexagonal chisel holder and is compatible with chisels shown on page 10. All others Chisel Scalers shown above have 1/2" square connection.
Standard Needle and Chisel Scalers
TVS™ Needle Scalers with Integrated Vacuum Shroud
Inline
H
H
12 / 3mmN/A
19 / 3mmN/A
3.53.3
5.754.4
38003800
30003000
3.03.0
5.55.5
110.498.9
113.398.6
8.58.2
9.317.4
123.2199125.2300
133.3199135.3300135.3395
19 / 3mmN/A
28 / 3mmN/AN/A
5.754.5
8.256.26.2
30003000
220022002200
5.55.5
8.08.08.0
113.398.6
114.5105.1105.1
12.622.4
18.925.625.6
131.3099134.3200
141.4099144.4200
28 / 3mmN/A
35 / 4mmN/A
107.5
12.58.2
22002200
18001800
8.08.0
8.58.5
114.5105.1
117.4105.1
2BPG Needle Scaler2BPG Chisel Scaler
3BPG Needle Scaler3BPG Chisel Scaler3BPG Chisel Scaler*
3B Needle Scaler3B Chisel Scaler
4B Needle Scaler4B Chisel Scaler
Pistol
2B Needle Scaler
DescriptionGripModelNumber
Weight(lbs.)
Blows per
minuteCFM @90 PSI
Noise Leveldb(A)
VibrationLevelsm/s2
Inline 139.2007 6.4 3000 5.5 98.6 17.4
139.2107
139.3107
6.6
9.9
3000
2200
5.5
8.0
98.6
105.1
22.4
19.9
2BPG Needle Scaler
3BPG Needle Scaler
CS Unitec's Trelawny™ TVS™ Needle Scalers with Integrated VacuumShroud enable dust-free working in hazardous applications when usedwith a dust extraction vacuum (see page 15 for dust collection systems).
Pistol Grip
Semi PistolGrip
Above: Model 1B Chisel Scalerwith Square Cranked End Chisel
for removal of flux
CS Unitec offers afull line of non-sparking, non-magnetic chiselsand safety handtools for hazardousareas and Exzones. Contact usfor details.
Standard Needle Scalers and ChiselScalers convert in seconds with optional
head or when purchased as a Kit.Contact us for more information.
111.1099114.1200
121.2099124.2200
Inline Grip
12.219.9
23.545.2
Chisel Part No.
9• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Available in 3mm flat top only; for use in potentiallyhazardous areas.
Needles
Flat Tip
2mm
2mm
2mm
2mm
2mm
3mm
3mm
3mm
3mm
3mm
3mm
4mm
4mm
4mm
4mm
3mm
3mm
6 x sets of 29 needles
6 x sets of 51 needles
6 x sets of 65 needles
Box of 100 needles
Box of 2000 needles
6 x sets of 12 needles
6 x sets of 19 needles
6 x sets of 28 needles
6 x sets of 49 needles
Box of 100 needles
Box of 1000 needles (180mm long)
6 x sets of 19 needles
6 x sets of 35 needles
Box of 50 needles
Box of 500 needles
Box of 1000 needles 5" long (127mm)
19 x needles 5" long (127mm)
412.1129
412.1151
412.1165
452.1110
442.1107
413.1112
413.1119
413.1128
413.1149
453.1110
443.1107
414.1119
414.1135
454.1105
444.1107
443.1105
443.1115
Flat-tipped needles will reduce markingon metal surfaces and can give apolishing effect. For use on thin gaugemetals and any surface where a lighttreatment is required.2mm needles used on a welded joint produce a similareffect to shot peening, reducing stress in the weld.
Size Description Part #
Chisel Tip
3mm
3mm
3mm
3mm
3mm
3mmConversions:2mm = 0.08"
3mm = 0.12"
4mm = 0.16"
180mm = 7"
6 x sets of 12 needles
6 x sets of 19 needles
6 x sets of 28 needles
6 x sets of 49 needles
Box of 100 needles
Box of 1000 needles
413.2112
413.2119
413.2128
413.2149
453.2110
443.2107
These needles will clean the samematerials as a pointed tip, but will leavelight surface marking
Size Description Part #
Pointed Tip
3mm
3mm
3mm
3mm
3mm
3mm
4mm
4mm
4mm
4mm
6 x sets of 12 needles
6 x sets of 19 needles
6 x sets of 28 needles
6 x sets of 49 needles
Box of 100 needles
Box of 1000 needles
6 x sets of 19 needles
6 x sets of 35 needles
Box of 50 needles
Box of 500 needles
413.3112
413.3119
413.3128
413.3149
453.3110
443.3107
414.3119
414.3135
454.3105
444.3107
Sharpened to a conical point, these arethe most effective in breaking throughvery hard scale on materials where somesurface indentation is permissible - or where aroughening or keying of the surface is actuallydesirable.
Size Description Part #
3mm
3mm
3mm
3mm
3mm
3mm
Box of 12 needles
Box of 19 needles
Box of 28 needles
Box of 49 needles
Box of 100 needles
Box of 500 needles
403.1312
403.1319
403.1328
403.1349
453.1310
443.1307
Size Description Part #
Spark-Resistant Copper BerylliumH
Available in 3mm flat tip form only, to be used inapplications such as refurbishment of food processingmachinery or areas of high humidity where the corrosiveeffect on needles would be prohibitive.Used on decorative concrete surfaces where contamination of thesurface from carbon steel needle is undesirable.
3mm
3mm
Box of 100 needles
Box of 500 needles
453.1207443.1207
Size Description Part #
Stainless Steel
See page 15 fordust extractionsystems.
CS Unitec's Trelawny™ needles last 10x longer than standard needles. Save time and money with fewer needle changes and less downtime.
All of CS Unitec's Needle Scalers are delivered from stock complete with 180mm long x 3mm diameter chisel tipped high performance needles. Other needle holders are available as accessories for use with 2mm and 4mm diameter needles. We also offer spark resistant needles for use in potentially hazardous areas and Ex zones, as well as stainless steel needles for usein humid areas - such as applications in the food processing industry - where corrosion is a concern.
Standard pack set is one carton of 6 sets. Some models are packed as an individual set in a box.Boxes of 100 qty. needles in a durable, reusable plastic container are available, as well as largerquantities.
Long-Reach Chisels/Scrapers
StandardScalers
LITEScalers
2ft. Chisel4ft. Needle4ft. Chisel5ft. Chisel
4ft. Chisel5ft. Chisel6ft. Chisel
136.3299137.3499136.3499136.3599
136.3497136.3597136.3697
8111112
6.757.58.5
2200220022002200
220022002200
Model DescriptionModelNo.
Weight(lbs.)
4.54.54.54.5
4.54.54.5
841048486
898984
CFM@ 90PSI
Blows per
minute
Noise Leveldb(A)
Chisel Accessories
Needle Scaler Accessories
Scraper Accessories
• Ice• Residue• Adhesive• Asbestos• Linoleum• Carpeting• Plaster
• Mortar• Floor tiles• Metal slag• Rubber coatings• Roofing materials• Chemical spillages• Bituminous products
Applications include removal of:
CS Unitec’s Trelawny™ Long-Reach Scrapersfeature one tool with multiple applications.
• Available in 2', 4', 5' and 6' lengths• Three tools in one – chipper, scraper and descaler• Quick-change chisel release• Low air consumption• Standard and "LITE" models
Chip, scrape and descalewith one versatile tool
Chipping Scraping Descaling
705.1100
705.1101
705.1102
705.1106
705.1112
705.2102
708.1101
9"
9"
8"
9"
8"
8"
1"
2"
1"
4"
2"
4"
4"
1-1/8" comb insert
Spark-resistant aluminum bronzefor use in hazardous areas
Flat chisel for sand cast chipping
Asphalt cutter / paint removal /general chipping applications
Removal of linoleum from floor base
Spark resistant aluminum bronzefor use in hazardous areas
Floor tile removal
Brick cleaning and reclamation (usewith 8" long comb holder 708.1100)
ChiselPart No.
ChiselLength
Blade Width Applications
H
H
All long-reach scrapers are available as needlescalers by changing the scraper/chisel with theneedle attachment P/N 415.3532. See page 9for needles.
Flat
431.3504
431.3508
431.3512
Beveled
431.3904
431.3908
431.3912
439.3504(5 Blades)
439.3508(5 Blades)
439.3512(4 Blades)
439.3524(5 Blades)
439.3528(5 Blades)
439.3522(4 Blades)
Adhesive andpaint build up
removal
Paint andcoatingspillageremoval
Carpet andtile removal
Stubbornadhesiveremoval
Carpet andtile removal
Adhesiveremoval
4"
8"
12"
4"
8"
12"
ScraperAssemblyPart No.
BladePack
BladeWidth
Applications
10 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Long-Reach Chisels/Scrapers/Scalers
11• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Applications Include:• Ship Decks• Tank Bottoms• Bridge Decks• Floating Platforms
CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic Deck Hammer operates with 7x less vibration thanstandard models. This tool utilizes vibration dampingcomponents to offset the hammer vibration createdwhen the heads impact the workpiece.
SF11 Steel Deck Hammer
CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic DeckHammer will fracture and reduce scale, corrosion and thickcoatings in minutes. The machine's low profile body andadjustable handle mean the deck hammer needs only 6"clearance for working under pipes and other constructions.
• Includes Vibro-Lo™ vibration reduction technology
• Optional spark resistant beryllium copper replacement headsto reduce risk of explosion in potentially hazardous areas
• Detachable taper fit cutter head reduces cost of replacementand extends piston life
• Optional vacuum shroud reduces hazardous and nuisancedust when used with TVS approved dust collectors
11 heads deliver 33,000 BPM Fracture and reduce scale, corrosionand thick coatings in minutes – andreduce blast media costs
11 heads provide 33,000 BPM (11 x 3000 BPM)
Vibro-Lo™Vibration Reduction
Technology
SF11 AccessoriesPart No.
426.5351
606.5303
426.5352
612.5301
437.0100
Cruciform Cutter Head
Copper Beryllium (CuBe)Cruciform Cutter Head
Bush Cutter Head
Common Tapered Piston
Vacuum Shroud
Vibro-Lo™
Vibro-Lo™
Vibro-Lo™
ScaleForce Eleven (SF11) Pneumatic Deck Hammer
SF11 w/ CuBeHeads
SF11 w/ DustShroud
159.5910
159.5930
159.5912
ModelNumber
36
36
37.35
11.1" x 47.6"
11.1" x 47.6"
11.1" x 47.6"
Weight(lbs.)
Dimensions(WxH)
10"
10"
10"
70
70
70
113.1
113.1
113.1
5.76
5.76
5.76
33,000
33,000
33,000
CuttingWidth
Blows per
minuteCFM @90 PSI
Noise Leveldb(A)
VibrationLevelsm/s2
SF11 w/CruciformHeads
Copper Beryllium for use in potentially explosive areas H
H
Bush Cruciform Optional dust shroud,P/N 437.0100, tocollect dust and debriswhen connected to adust collectionvacuum.
See page 15 for air-powereddust collection vacuum – ATEXclassified for use in Gas Zone 2and Dust Zone 22.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com12
Applications include:• Removal of rust, scale, paint, adhesives and more • Keyed or grooved profiles• Roughing concrete
CS Unitec's Trelawny™ Floor Planers tackle the most demandingsurface preparation and material removal applications. Ideal for theremoval of coatings and corrosion from steel and concrete surfacesto prepare for re-coating. Produce an ideal keyed or grooved profileon concrete for waterproofing and non-slip surface applications.
• Depth control maximizes performance and extends cutter life
• Integrated vacuum connection and hold-to-run handle
• Fully adjustable handlebar for operator comfort
• Electric, pneumatic or gas power
Remove rust, scale, paint, adhesivesand more from steel and concrete
Floor Scarifiers / Planers Electric • Pneumatic • Gas
TFP 200 Floor Scarifiers
320.2004T
320.2012T
14" x 35" x 35"1/8"
Model NumberWeight(lbs.)
220V - 240V, 3 HP 8"
CuttingWidth
Dimensions(WxLxH)
Max CuttingDepth per Pass
TFP 200 Electric
14" x 35" x 35"1/8"165CFM @ 90 PSI, 3.5 HP
Motor Specifications
8"
149
99
TFP 200 Pneumatic
320.2000T 14" x 35" x 35"1/8"Honda GX160 Gas, 5.5 HP 8" 130
TFP 200 Gas
TFP 200 Cutters IndividualCutter
N/A
320.5120
320.3658
320.5500
320.5600
320.5650
320.5500
DrumAssembly
320.9620
320.1020SB
320.1020SS
320.1020ST
320.1020SM
320.1020SM
320.1020G
Wire Brushes
Beam Cutters
Star Cutters
Tungsten Carbide Tipped Cutters
Milling Cutters (22mm)
Milling Cutters (11mm)
Tungsten Carbide Tipped Cutters(for grooving)
Cutter Applications:
Wire Brushes are ideal for finishcleaning and polishing on steel; canbe used for light concrete deposit.
Beam Cutters are ideal for lightpaint/corrosion removal, withminimal damage to substrate.
Star Cutters are ideal for theremoval of mastics and rubberizedcoatings.
Tungsten Carbide Tipped Cutters are ideal for aggressiveapplications such as roughing concrete and heavy corrosion removal,as well as grooving roadways for non-slip surface.
Milling Cutters are ideal for the removal of plastic road markingswithout penetrating the surface.
TFP 200Electric
TFP 200Pneumatic
TFP 200Gas
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 13
Trident Neptune Flexible Shaft Deck Descalers
Applications Include:• Removal of scale, rust, paint and other deposits• Preparation of surfaces for priming, painting or coating
Standard equipment includes: 9' x 5/8" flexible shaft; heavy-duty leaf scaling head; 6-cutter scaling head; 6" dia. power brush, spanner set and hand guard.
Trident Neptune Deck Descaler Accessories
Trident Neptune Deck Descalers
Electricw/ Swivel Base
Electricw/ Skid Base
340.490/S
340.TN/50/S
340.TN/100/S
340.TN/S/110
340.TN/S/220
3000
2850
3450
2850
3450
75
75
75
106" x 8.3" x 11.4"
106" x 8.3" x 11.4"
106" x 8.3" x 11.4"
ModelModelNumber
55.077.00
55.077.00
55.077.00
55.077.00
55.077.00
ISSANumber
59 12 81
59 12 41
59 12 42
59 12 41
59 12 42
IMPANumber
68 CFM @ 90 PSI1.5 HP
110V / .75 HP
220V / .75 HP
110V / .75 HP
220V / .75 HP
MotorSpecifications
Weight(lbs.)
Dimensions(LxWxH)
CutterSpeed(RPM)
Pneumaticw/ Swivel Base
6-Cutter Scaling Head Part No: 340.581 ISSA: 55 082 01 IMPA: 59 12 86
Heavy Duty Scaling Head Part No: 340.550 ISSA: 55 078 01 IMPA: 59 12 75
Wire Brushes
Flexible Shaft with Handpiece and Coupling Part No: 340.285 ISSA: 55 077 01 IMPA: 59 12 99
Cutter WheelPart No: 340.332ISSA: 55 082 04IMPA: 59 12 89
ReplacementParts:
ReplacementParts:
Side Plates (2 qty.)Part No: 340.575/2ISSA: 55 082 02IMPA: 59 12 87
Cutter PinPart No: 340.583ISSA: 55 082 05IMPA: 59 12 90
Center BoltPart No: 340.581/AISSA: 55 082 03IMPA: 59 12 88
Chipping LeafPart No: 340.347ISSA: 55 078 06IMPA: 59 12 79
Side Plates (2 qty.)Part No: 340.551/2ISSA: 55 078 02IMPA: 59 12 76
Cutter PinPart No: 340.553ISSA: 55 078 05IMPA: 59 12 80
Center BoltPart No: 340.552ISSA: 55 078 03IMPA: 59 12 77
Spacing Washer (50 qty.)Part No: 340.5849/50ISSA: 55 078 04IMPA: 59 12 78
6" Power BrushPart No: 340.160ISSA: 55 084 03IMPA: 59 12 93
Center BoltPart No: 340.558ISSA: 55 084 04IMPA: 59 12 94
6" Twisted Knot BrushPart No: 340.163ISSA: 55 084 01IMPA: 59 12 91
Center BoltPart No: 340.559ISSA: 55 084 02IMPA: 59 12 92
Crimped Wire Cup BrushPart No: 340.166ISSA: 55 084 07IMPA: 59 12 97
Center BoltPart No: 340.557ISSA: 55 084 06IMPA: 59 12 96
Twisted Knot Cup BrushPart No: 340.167ISSA: 55 084 05IMPA: 59 12 95
Center BoltPart No: 340.557ISSA: 55 084 06IMPA: 59 12 96
CS Unitec's Trelawny™ Trident Neptune Deck Descaler is idealfor the rapid removal of scale, rust, paint and other unwanteddeposits on ship decks and other metal surfaces, leaving areceptive surface for priming/painting or coating application.
• Lightweight and portable
• 9' x 5/8" flexible shaft for wide coverage area
• Motor overheat protection on electric models
• Unique non-corrosive D-coupling with positive locking mechanism
• Two-skid base design keeps unit stable and upright; optional swivel base available
Ideal for rapidly removing scale, rust, paint and other unwanted deposits
• 1-800-700-5919 • Visit our Web site at www.csunitec.com14
Hydraflex Hold Cleaning Gun Kit
Specifically designed for hold cleaning on bulk carriersand cargo vessels of all sizes
The Hydraflex uses a combination of water and compressed air for a powerful,high-pressure jet of water that can reach up to 100 ft. away.
• One-man operation
• Constructed of high-quality, non-corrosivestainless-steel materials to prevent corrosion
• Adjustable air and water pressure control valve
Item Model Part No. ISSA No. IMPA No. Weight (lbs.)
1 Gun 342.HY01 55.085.01 59 07 42 12
2 Tripod 342.HY02 55.085.02 59 07 42 21
3 Water Hose Coupling 342.HY03 – – 4.3(2-1/2" x 2-1/2")
4 Water Hose Coupling 342.HY04 – – 0.75(2-1/2" x 2")
5 Instantaneous Water 342.HY05 – – 0.66Hose Adapter
6 Ball Valve 342.HY07 – – 3.10
7 Base Assembly 342.HY60A – – 14.4
Hydraflex Hold Cleaning Gun Accessories
1
2
6
7
Hydraflex Hold Cleaning Gun Kit
ModelModelNumber
ISSANumber
IMPANumber
70 CFM @ 90 PSI
70 CFM @ 90 PSI
342.HY50
342.HY50T
55.085.00
–
55 07 00
–
42
52
10-18kg
10-18kg
MotorSpecifications
Weight(lbs.)
85 psi
85 psi
WaterPressure
2"
2"
WaterHose
3/4"
3/4"
AirHose
Recoil
StandardKit withoutBase
(includes items1, 2, 3, 4 & 5)
CompleteKit withBase
(includes items1, 2, 5 & 6)
Model CS 1435 H(shown at left)
automatically"pulse" cleans filterswithout interruptingoperation!
• Antistatic vacuum and air supply hose
• ATEX classified* Ex II 2 GcT6 foruse in Gas Zone 2 and Dust Zone 22
• Robust stainless steel construction
• Floor tool kit for general cleaning work
• Double filtration with optional 14"Permaflow filter
• Optional HEPA filter – for collection of hazardous dust
• Disposable paper filter or reusablecloth bag for wet use
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Collection of dry dust/debris and non-flammable liquidsATEX classified; antistatic vacuum and air-supply hose
Air-Powered Dust Collection Vacuum – KAV 30 AIR
Optional Filter BagsPaper filter bags for CS 1225 and CS 1435 - P/N 416014 (5-pack)Plastic filter bags for CS 1225, CS 1435 and CS 1500 - P/N 421742 (5-pack)Paper filter bags for CS 1500 - P/N 416021 (5-pack)Slurry filter bags for CS 1500 - P/N 420592 (3-pack)
CS 1225 H
CS Unitec's wet/dry dust extraction vacuumsoffer strong 130 CFM air flow and an electromagnetic pulse filter cleaning system to maximize vacuum power and dust collection.
• Ideal for use with power tools• 99.999% HEPA filtration efficiency of particles
down to 0.3 microns; automatic filter cleaning • "Power Take Off" outlet activates the vacuum
ON/OFF from the power tool switch
• Non-HEPA models available, 99.930% filtration efficiency
• Kit available to connect two power tools (P/N 198804)
Electric-Powered Dust Collection Vacuums with HEPA Filtration
"Powertake-off"outlet
HEPA Vacuum SpecificationsCS 1225 H CS 1500 H
Power 11 Amp 11 Amp 11 Amp
Air flow 130 CFM 130 CFM 130 CFM
Tank capacity 6.6 gal. 13 gal. 6.6 gal.
Weight 24.3 lbs. 35.2 lbs. 24.3 lbs.
Filter P/N (2pk.) 419190 419190 419190
CS 1435 H
KAV 30 AIR Vacuum SpecificationsDry Model
303.10KAV30/DWet/Dry Model
303.10KAV30/WD
CFM @ 90 PSI 35 35
Output flow 70 CFM 70 CFM
Tank capacity 6.8 gal. 6.8 gal.
Weight 32 lbs. 32 lbs.
Paper Filter P/N (10pk.) 303.1030 303.1030
HEPA Filter P/N 303.1060 303.1060
Standard Vacuum SpecificationsCS 1225 CS 1500
Power 11 Amp 11 Amp 11 Amp
Air flow 130 CFM 130 CFM 130 CFM
Tank capacity 6.6 gal. 13 gal. 6.6 gal.
Weight 24.3 lbs. 35.2 lbs. 24.3 lbs.
Filter P/N (2pk.) 416069 416069 416069
CS 1435
15
We make no claim that use of a vacuum will eliminate contaminants. Wear an approved respirator mask and follow all appropriate OSHA safety regulations forproper ventilation, dust handling, eye protection, etc. when using a dust extraction grinder and vacuum.
Dust Collection Vacuums Pneumatic • Electric
Optional Filters, Bags and Accessories for KAV 30 AIRAntistatic standard filter assembly (dry use w/paper filter or bag) - P/N 303.1025/ASPermaflow filter for secondary filtration - P/N 303.1035Antistatic float assembly for wet use - P/N 303.1050/ASDisposable, sealable paper bags for waste such as hazardous dust - P/N 303.1005 (10-pack)
KAV 30 AIR - Dry Model Part No. 303.10KAV30/DStandard equipment includes:Antistatic 38mm tool kit w/
dusting brush (P/N 303.1085/AS)Antistatic cloth filter (P/N 303.1025/AS)K6 paper filters (10pk.) (P/N 303.1030)
The ATEX Directive 94/9/EC (ATEX Group-95) was established toprovide technical and quality objectives to control explosiveatmospheres, as well as the standards for equipment andprotective systems used in such areas. Recognized internationally,tools with ATEX classification provide safety assurances to usersthat the product was manufactured to high levels of safety.
Four ATEX classification elements are used to ensure equipmentis appropriate for its intended purpose and application.
For more information on these classification elements, as wellas the ATEX Directive and Ex zones, visit www.csunitec.com.
*ATEX Classified power tools ensure a high level ofsafety in Ex zones and hazardous atmospheres.
KAV 30 AIR - Wet/Dry Model Part No. 303.10KAV30/WDStandard equipment includes:Antistatic float assembly (P/N 303.1050/AS)Antistatic 38mm tool kit (P/N 303.1095/AS)Antistatic cloth filter (P/N 303.1025/AS)K6 paper filters (10pk.) (P/N 303.1030)
ModelEAU 34/4 CB
Reamers, Drills & Drive Motors Air • Electric • Hydraulic
AIRBridgeReamer
Bridge Reamers, CornerDrills and Drive Units
MT360-140 /200-470
Model NumberWeight(lbs.)
16.3 Amp / 110V 1-1/4" 2" 92
Drilling(in steel)
Reaming(in steel)
TubeRolling
TorqueOutput(ft./lbs.) Arbor
LoadSpeed
Electric Motor for reaming, drilling and tapping – with torque control
Pneumatic Bridge Reamers / Corner Drills – ATEX Classified for Ex Zones
Hydraulic Bridge Reamer / Corner Drill
Electric Drive Units with reverse and variable speeds
Motor Specifications
14EHB 32/2.2 R/RL(reversible)
MT1MT2MT3MT4
500270260180
0.7 HP, 21 CFM @ 90 PSI1.8 HP, 49 CFM @ 90 PSI2.6 HP, 63 CFM @ 90 PSI3.0 HP, 63 CFM @ 90 PSI
5/8"7/8"
1-1/4"2-1/8"
1-1/4"
MT3
MT3MT3
MT3
220
30-230
80-570
50-420
3.8 HP, Oil Pressure2000 PSI, Oil Flow 4 GPM
16.3 Amp / 110V
20 Amp / 110 V
22 Amp / 110 V
1-1/4"
N/A
N/A
N/A
–
3"
60
174203
187
25
1519.5
20
2 1806 0010
ETE 32/2.3 R/RL
EAU 34/4*
EAU 36/4 with 4-speed gearbox and variable speed
* EAU 34/4 available with control box (on/off, reverse) – order Model No. EAU 34/4 CB
1"
N/A
N/A
N/A
1/2"5/8"1"2"
7355386
–––2"
7192537
2 1602 00302 1701 00302 1801 00302 2104 0030 (reversible)
Woodboring Air Drills – ReversibleHeavy-duty power for underwater drilling and other wood boring applications
750 RPM700 RPM380 RPM
Model NumberWeight(lbs.)
2 HP, 39 CFM @ 90 PSI3 HP, 50 CFM @ 90 PSI3 HP, 50 CFM @ 90 PSI
1"2"3"
StubMT2MT2
Drilling(in wood) Spindle
FreeSpeed
Woodboring Drills – include 1/2" NPT threaded exhaust portMotor Specifications
14.524.7524.75
Optional Geared Drill Chuck
Part no. DE-99CPart no. IBC 22 (MT2)Part no. IBC 22 (MT2)
2 1903 00102 1924 00102 1932 0010
Model 2 1903 0010with lever throttleUp to 1" dia.
Model 2 1924 0010
with self-closingroll throttleUp to 2" dia.
16 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Electric Bridge ReamerEHB 32/2.2 R/RL
ModelEAU 36/4
• Ideal for drilling wood in marine timbers, underwater use and railroad repair work
• 1/2" woodboring chuck style
• Thrust bearing support for long lifeand efficient operation
• Lever throttle and durable spur gearing
• Includes breast plate and dead handle
• Accessories include 1/2" to 1-1/2" dia. woodboring drill bits in lengths from 12" to 36"
Air, electric and hydraulic power for bridge reaming and heavy-duty drilling applications in steel and other metals, as well astube rolling, tube expanding, tapping, valve turning and more.
• Electric bridge reamers and drive units have high torque,two gears and variable-speed reversible motors
• Air and hydraulic bridge reamers include self-closing roll throttle and built-in oiler for motor
• Bevel 30˚, 45˚ or 2.5mm radius on steel, stainless,nonferrous metals, brass and plastics
• Deburr and chamfer; straighten edges, internal and externalradii; and countersink holes from 7/8" dia.
• Fine adjustment feature for slight chamfers whendeburring for the preparation of weld seams
• Ideal for: Boiler and process plant construction(prepare weld seams on heat exchangers); Mechanicalengineering (deburr machine parts, chamfer edges toprotect against paint peeling and create visible edges); Sheetmetal (deburr cut edges); Moldmaking (straighten edges,internal and external radii and countersink holes from 7/8" dia.)
30˚ 45˚ 2.5mm radius
One Machine, Three Milling Options
Milling cutter 30°,Chamfer 0 - 1/4"
Milling cutter 45°,Chamfer 0 - 1/4"
Milling cutter 2.5mm radius(0.098")
EKF300.3 EKF450.3 EKF452.3
Portable Beveling Machines
Bevel, deburr, chamfer and prepare weld seams fasterand cleaner than angle grinders
Fast, easy preparation ofweld seams and bevelson plate or pipe
EKF Multipurpose Beveling Machines
SKF Beveling Machinefor Plates and Pipes
Model No.Weight(lbs.)
CuttingSpeed
CuttingInsertsQty. Dimensions
Max.BevelWidth*
EKF Multipurpose Beveling Machines
SKF Beveling Machine for Plates and Pipes
Motor PowerBevelingAngle
30˚45˚
2.5mm (0.098")
15˚ - 60˚Continuously Adjustable
1/4"
3/4"
3000 SFPM
1800 SFPM
3 10.5
10 43
12-1/2" L x 5-1/2" Wx 11-5/8" H
16-1/2" L x 13" W
13.5 Amp/110 V13.5 Amp/110 V13.5 Amp/110 V
10 Amp/110 VSKF 25
15˚ - 60˚Continuously Adjustable
1-3/16" 1750 SFPM 6 11023-1/2" L x 24" Wx 20-1/2" H
10 Amp/110 VAutoCUT 500
* Max. bevel width may require several passes, depending on material hardness 220 V / 50 Hz also available
EKF 300.3EKF 450.3EKF 452.3
17• 1-800-700-5919 • Visit our Web site at www.csunitec.com
• Bevel 15˚ to 60˚ angles and land width up to 3/4" on steel, stainless steel, aluminum and nonferrous metal plates and pipe
• Work on welding angles and weld preparation onpipes/tubes with a minimum OD of 6-1/4" (160mm) withbuilt-in pipe roller guide; ideal for beveling pipe 6-1/4" ODand larger
• Robust design, single operator control and easy handling
• Anti-vibration system for operator comfort
Powerful, self-guiding bevelingmachine for 15˚ to 60˚ edges onplate up to 1.5" thick
AutoCUT 500 AutomaticEdge Processing Machine
SKF25
Three Models:EKF 300.3 - 30˚EKF 450.3 - 45˚EKF 452.3 - 2.5R
Also available:1.6mm / 0.063"cutting inserts(SHM 201).Contact us fordetails.
AutoCUT 500 Automatic Edge Processing Machine
• Bevel 15˚ to 60˚ anglesand land width up to1-3/16" on steel, stainless steel,aluminum and nonferrousmetal plates and pipe
• Unit propels itself on the plate, no need for a cart or stand
• Automatic feed and return
• Reversible carbidecutting inserts
AutoCUT500
18 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
• Largest portable dry metal cutting saw on the market• Dry cuts steel, sandwich panels, I-beams, trapezoidal sheets,
conduits, metal pipes and more – without coolant
• Side-mounted tilt tray for disposal of chips
• Motor protection with optical overload indicator
• Dust collection port
Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Arbor SizeBlade Part No.Blade No. of TeethWeight
16 Amp/115V*12-5/8" (325mm) 4-3/4" (120mm)
1,400 RPM1"
608276 (12-5/8" dia.)80T
21 lbs.
Order No. 608270 U
* 230V also available – Order No. 608270
Super Hand-Held Accessory: Guide Railwith Clamping System - 2 x 23 5/8" Rails(P/N 608275 - shown at right)Ideal for straight cutting ofsandwich panels and sheets, guiderail and clamping system providessecure and jam-free guidance ofsaw blade through material. Railscan be used together for straightedge length up to 47" (1,200mm).
Dry Cutting Circular Saws – Electric
Fast, portable, burr-free cutting of metal plates,pipes, profiles and more… without coolantSuper Hand-Held Dry Cut Saw12-5/8" diameter, dry cut up to 4-3/4" depth
• Dry cuts tubes, profiles and more from steel,stainless, non-ferrous metal, plastic, composite and more – no coolant or deburring necessary
• Fine cuts in soft and sensitive materials• Adjustable saw head for miter cuts of -45˚ to +45˚• Secure clamping with 3-step quick-release system• Lightweight and portable at only 42 lbs.
10" Saw Blades for 9410 NDP/N 600598, 60T, for mild steelP/N 600654, 66T, for thin steel
90˚ Cut 45˚ CutRound 2.75" 2.36"
Square 2.75" 2.36"
Rectangular 3.9" x 2.75" 2.36" x 2.36"
9410 ND Max. Cutting Capacities
90˚ Cut 45˚ CutRound 5.5" 4.72"
Square 4.92" 3.15"
Rectangular 4.13" x 6.1" 2.95" x 3.93"
Model 9435 Max. Cutting Capacities
Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Arbor SizeBlade Part No.Blade No. of TeethWeight
19 Amp/115V*14" (355mm)
6" at 90˚1,400 RPM
1"600570 (14" dia.)
90T55 lbs.
Order No. 608301
* 230V also available – Order No. 600560
• Dry cuts stainless steel, ferrous and non-ferrousmetal, plastic and aluminum tubes, profiles andmore – no coolant or deburring necessary
• Exclusive blade stabilizing system reduces vibration• Powerful, high-torque motor for continuous operation• Patented quick-release vise for precise bevel cuts
14" Saw Blades for Model 9435P/N 600570, 90T, for stainless and thin steel P/N 600580, 72T, for stainless and medium steel P/N 600590, 60T, for stainless and thick steel P/N 600591, 60T, recommended for cast ironP/N 600595, 66T, recommended for mild steelP/N 600594, 96T, recommended for aluminumOptional stand available – Order No. 600526
Integrated dustcollection port
Dry Cut Miter Saw – 10" dia.Precise 45˚ cuts left and right
9435 Premium Super Dry Cut Saw (608301) standardequipment includes saw blade (P/N 600570).
8320 SHDC Super Hand-Held DryCut Saw (608270 U) standardequipment includes a carryingcase and saw blade (P/N 608276).
Premium Super Dry Cutter – 14" dia.6" max. depth of cut
LargestHand-heldDry-cuttingMetal Saw
9410 ND standard equipment includes a carryingcase and saw blade (P/N 600598).
Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Arbor SizeBlade Part No.Blade No. of TeethWeight of Saw and Stand
13 Amp/115V*10" (255mm)
4" at 90˚1,600 RPM
1"600598 (10" dia.)
60T42 lbs.
Order No. 608700
* 230V also available – Order No. 600651
19• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Dry Cutting Circular Saws – Pneumatic
• Dry cuts steel, non-ferrous metal, plastic, grating, composite and corrugated materials
• Cuts at 90˚ and 45˚ angles
• Ideal for foundries, petrochemical, marine,demolition and fabrication applications
• Cuts steel plate up to 3/4" thick
Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Air ConsumptionAir ConnectionVibrationWeight
2 HP9"
3-1/4" at 90˚ / 2-1/8" at 45˚1,700 RPM
60 CFM at 90 PSI1/2" NPT<2.5 m/s2
19 lbs.
Order No. 5 1115 0020
Standard blade .073"(1.85mm)thickness
Ultra-thin blade (P/N 722-23060).055" (1.4mm)thickness
Standard equipment includes an impact-resistantcarrying case and Ultra-thin LBS blade (P/N 722-23060). 9" Laser Beam Saw (LBS) ultra-thin
blade for all-purpose use features:
Part No.722-23060*
* Standard with Model 5 1115 0020Pneumatic Metal Saw.
Teeth
60
Thickness
.055"
Air power ideal for foundries, petrochemical, marine,demolition and fabrication applications
9" dia. Air Saw for 90˚ and 45˚ CutsDry cut up to 3-1/4" depth and 3/4" steel plate
• Thinner than conventional saw blades:LBS = .055" vs. Std. = .073" thickness• Shock-resistant, less vibration
• Produces 35% fewer chips
Dry Cutting TCT Saw Blades
• Heavy-duty air-powered circular saw,ideal for wet and dirty conditions
• Pneumatic power eliminates burn outfrom stalls
• Cuts up to 2-1/2" depth at 90˚ and 1-1/2" depth at 45˚
• 7-1/2" max. blade capacity
• D-handle design with inside trigger and safety lock button to preventaccidental starting
Motor PowerBlade Diameter*Max. Depth of CutSpeed (Free)Air ConsumptionAir ConnectionVibrationLengthWeight
1.7 HP (1.3 kW)7-1/2" (190mm)
2-1/2" at 90˚ / 1-1/2" at 45˚3,200 RPM
53 CFM at 90 PSI1/2" NPT<2.5 m/s2
13-1/2"19 lbs.
Order No. 5 1116 0020
7-1/2" dia. Heavy-Duty Air SawDry cut up to 2-1/2" depth at 90˚ and 1-1/3" at 45˚
9" diameter(1" arbor)
1.7 HP Air Motor
2 HPAir
Motor
Cermet-Tipped Dry Cutting Saw Blades7-1/2" (190mm) dia., .073" thickfor Model 5 1116 0020P/N 719240, 40T, for standard useP/N 719248, 48T, for thin platesP/N 719248A*, 48T, for aluminumP/N 719270, 70T, for sheet metal
* P/N 719248A is a Tungsten Carbide-Tipped (TCT) blade.
Tungsten Carbide-Tipped Dry Cutting Blades9" dia., .073" thick – for Model 5 1115 0020
P/N 721-23048, 48T, for standard useP/N 721-23060, 60T, for aluminumP/N 721-23068, 68T, for thin-wall metalP/N 721-23084, 84T, for sheet metal
Standard equipment includes rip fence andblade wrench. Blade not included.
* The Model 5 1116 0020 saw also accepts 7-1/4" dia. blades.
90˚
Portable Reciprocating Saws Air • Hydraulic
20 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
5 1217 0020
5 6005 0010
15-7/8"1-1/8"
ModelNumber
Weight(lbs.)
1.3 HP, 46CFM @ 90 PSI 0-1800 1/2" NPT (ID)
Strokesper Minute Connection Length
Stroke Length
The CAT – Pneumatic
17-3/4"1-1/8"1.6 HP, 51CFM @ 90 PSI
Motor Specifications
0-2200 1/2" NPT (ID)
9
10.75
The WOLF – Pneumatic
5 1219 0010 1700 M 18 x 1.5Female
13.2
The SHARK – Hydraulic
1.6 HP, Cuts steel pipe and channel1/2" to 6" dia., plastic pipe to 8" dia.
2 HP, cuts pipe up to 6" dia., wood upto 8" dia., metal plate up to 3/4" dia.
The CAT Model 5 1217 0020
AIR ATEX ClassifiedATEX Classified
The WOLF Model 5 6005 0010
AIR
The SHARK Model 5 1219 0010
HYDRAULIC
• Fast cutting of pipe, structural steel, bolts, nails, pallets and other material
• The best power-to-weight ratios in the industry; compact size for cutting in confined spaces
• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts
1.3 HP, Cuts steel pipe and channel1/2" to 4" dia., plastic pipe to 8" dia.
Hand-held or clamp-on cutting in tough environmentsIdeal for a wide range of industries, including subsea, gas utilities, offshore oil,petrochemical, power generation, industrial plant maintenance and construction
2 HP, Oil Pressure 2000 PSI, Oil Flow 6 GPM (up to 13 GPM)
Low Vibration/Low Air Volume – Compact, Quiet & ReliableCut Pipe, Structural Steel, Sheet Metal, Fiberglass, Plastic and More
Outside
Outside
Outside
1 HP
1 HP
1 HP
5.25
5.5
5.5
7/8"
1-3/4"
1-3/4"
4
5.75
5.75
69
83
83
1.73
3.69
3.69
113/4" x 51/4" x 15/8"
153/4" x 51/4" x 15/8"
153/4" x 51/4" x 15/8"
TriggerModel No.MotorPower
Weight(lbs.)
Dimensions (LxHxW)
Stroke Length
2000
1200
1200
Strokes per
minuteCFM @90 PSI
1/2" NPT ID
1/2" NPT ID
1/2" NPT ID
Noise Leveldb(A)Connection
VibrationLevelsm/s2
PL905
CL50
CL75
PL Series CL Series
ATEX ClassifiedATEX Classified
Optional inside trigger*for hand-held use only.Add FT to Model No.
Workhorses for use in the fabrication, shipbuilding, ship repair, oil and petrochemical,boat building and aircraft maintenance fields, as well as by fire and rescue professionals
• Piston air motors use low air volume while maintaining a cutting speed of1200 to 2000 strokes per minute
• For use in hazardous areas and around gas and other flammable materials• Heavy-duty cast steel and aluminum saw bodies; built-in motor lubrication• Safety STOP/Isolator button disconnects air supply• Variety of Cengar Air Saw blades available
Reciprocating Saw Blades & Accessories
21
Heavy-duty Blades – These blades are much thicker than standard blades and havea stronger double-tang mount for heavy-duty cutting, either free-hand or with a clamp.
Super quick and precise for pipe, steel, plastic, etc.
No. 1001
No. 1002
No. 007D/200*
Cuts pipe up to 2"
Cuts pipe up to 4"
Cuts pipe up to 4"
8 TPI
8 TPI
M-Tooth
6" L x 1" W x .060" T
8" L x 1" W x .060" T
8" L x 1" W x .050" T
Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*
No. 007/150
No. 007/200
No. 007/280
Metal 1/8" and ThickerM-Tooth
M-Tooth
M-Tooth
6" L x 3/4" W x .035" T
8" L x 3/4" W x .035" T
12" L x 3/4" W x .035" T
No. 006/150
No. 006/250
Metal up to 1/8" ThickM-Tooth
M-Tooth
6" L x 3/4" W x .035" T
8" L x 3/4" W x .035" T
No. 1005
No. 1003
No. 1004
10/14 TPI
10/14 TPI
10/14 TPI
6" L x 1" W x .035" T
8" L x 1" W x .035" T
12" L x 1" W x .035" T
Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank
Made of tough, resilient steel with 10/14 variable toothpitch. Large blade width and double-shank mountdeliver excellent cutting performance and durability.
Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank
Cengar Air Saw Blades
CUTS 2x FASTER THAN ORDINARY BLADES! M42 Bi-metal for cutting steel and stainless steelThe teeth of the Patented M-Tooth Sawblade cut on the forward and back strokes, saving time.
Cuts inBoth Directions!
* 007D/200 has universal 1/2" tang
Ask for special blades to cut stainless steel.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
HB300/18
HB300/24
HB300/32
MC220/18
MC220/24
MYN150/18
MYT150/18
Hand
Hand
Hand
Machine
Machine
Notched Yellow
Tapered Yellow
18 TPI
24 TPI
32 TPI
18 TPI
24 TPI
18 TPI
18 TPI
12" L
12" L
12" L
83/4" L
83/4" L
6" L
6" L
1/2" Wide Bi-metal Blades (CL50 / PL905)
MB150/18
MB200/10-14
MB200/18
MB200/24
MB250/18
MB250/24
MB300/10-14
MB300/18
Machine
Machine
Machine
Machine
Machine
Machine
Machine
Machine
18 TPI
10/14 TPI
18 TPI
24 TPI
18 TPI
24 TPI
10/14 TPI
18 TPI
6" L
8" L
8" L
8" L
10" L
10" L
12" L
12" L
3/4" Wide Bi-metal Blades (CL75)
• Removes moisture and dirtfrom air lines; a float valveautomatically ejects waterand dirt
• Includes automatic oiler; protects tools from freezing in cold environments
• Eliminates air motordowntime caused by waterand dirt
• Connections for two tools,max. air flow 185 CFM
Model CSAP-2
AirPac Dryer/Cleaner
• Ideal for use with ourhydraulic power tools.
• Delivers 5 GPM or 8 GPM at 2000 PSI
• Easy to move with liftand latch handle
• Weighs 330 lbs.
Model CSP-95
Hydraulic Power Unit
Air Tool LubricantProLube-ATL - P/N CS 7043-001 (gallon)
Air Tool Lubricant with Anti-FreezeProLube-ATL/AF - P/N CS 7049-001 (gallon)
Air Tool Line Conditioner/CleanerFor use in underwater air tools – displacesmoisture and inhibits rust and corrosion ofair motors - P/N MS 9105 (quart)
22 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Portable Band Saws Air • Electric • Hydraulic
Fast, on-site cutting of pipe up to 8-1/2" diameterCold cutting saws for a wide range of industries, including refineries, chemicalplants, utilities, construction, offshore oil, mining, marine and demolition
• Fast, deep, cold cutting of pipe,conduit, bolts, cable, angle iron,structural steel, chain and more
• Cut steel, stainless steel, Inconel,chrome, Hastelloy, aluminum,copper, iron, fiberglass, plastics,wood and more
5 6003 0010
5 6031 0010
5 6062 0010
90 PSI @ 20 CFM
90 PSI @ 43 CFM
90 PSI @ 43 CFM
Motor Power and Specs.
1/4" NPT
1/2" NPT
1/2" NPT
AirConnection
(ID)
14
8
35
Wgt.(lbs.)
3/8"
1/2"
1/2"
AirHose
Model No.
43/4" OD / 41/2" x 43/4"
5 6031 0010
7" OD / 7" x 7"
81/2" OD / 9" x 8"
CuttingCapacity
43/4" OD / 41/2" x 43/4"
5 6031 0010
7" OD / 7" x 7"
81/2" OD / 9" x 8"
CuttingCapacity
43/4" OD / 41/2" x 43/4"
5 6031 0010
7" OD / 7" x 7"
81/2" OD / 9" x 8"
CuttingCapacity
Deep Throat™ AirBand – Stainless Steel housing
Wide Mouth™ AirBand – Stainless Steel housing
Standard AirBand™ – Aluminum housing
5 6046 0010
5 6040 0010
5 6079 0020
14
28
34
Wgt.(lbs.)Model No.
Deep Throat™ – Stainless Steel housing
Wide Mouth™ – Stainless Steel housing
Standard – Aluminum housing
Pneumatic Band Saws
Electric Band Saws Hydraulic Band Saws
Standard:Cut 4 3/4" round or 4 1/2" x 4 3/4"
Deep Throat™:Cut 7" round or 7" x 7"
Wide Mouth™:Cut 8 1/2" round or 9" x 8"
Standard:Cut 4 3/4" round or 4 1/2" x 4 3/4"
Pneumatic AirBand™ Saws
6 Amp, 110VAC 1.6 HP; Oil Flow: 4 GPM @ 2000 PSI1/2" FF (HTMA) Couplings
5 6043 0010
5 6041 0010
5 6054 0010
23
28
35.6
Wgt.(lbs.)Model No.
Deep Throat™ – Stainless Steel housing
Wide Mouth™ – Stainless Steel housing
Standard – Stainless Steel housing
Deep Throat™:Cut 7" round or 7" x 7"
Wide Mouth™:Cut 8 1/2" round or 9" x 8"
Standard:Cut 4 3/4" round or 4 1/2" x 4 3/4"
Deep Throat™:Cut 7" round or 7" x 7"
Wide Mouth™:Cut 8 1/2" round or 9" x 8"
Hydraulic Band Saws No. 9 2506 0010
No. 9 2506 0020
No. 9 2506 0030
No. 9 2506 0040
Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)
18 TPI
14 TPI
10/14 TPI*
8/12 TPI*
Cuts material 1/8" - 1/4" thick
Cuts material 3/16" - 1/2" thick
Cuts material 3/16" - 1/2" thick
Cuts material 1/2" and thicker
447/8" L x 1/2" W x .025" T
447/8" L x 1/2" W x .025" T
447/8" L x 1/2" W x .025" T
447/8" L x 1/2" W x .025" T
No. 9 2506 0220
No. 9 2506 0230
No. 9 2506 0240
No. 9 2506 0200
14 TPI
10/14 TPI*
8/12 TPI*
8 TPI
Cuts material 3/16" - 1/2" thick
Cuts material 3/16" - 1/2" thick
Cuts material 1/2" and thicker
Cuts material 3/4" and thicker
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)
66"
447/8"
No. 9 2506 0350
No. 9 2506 0340
No. 9 2506 0330
10/14 TPI*
8/12 TPI
6/10 TPI
Cuts material 3/16" - 1/2" thick
Cuts material 1/2" and thicker
Cuts material 3/4" and thicker
71" L x 5/8" W x .025" T
71" L x 5/8" W x .025" T
71" L x 5/8" W x .025" T
Blades for Wide Mouth™ saws (Model Nos. 5 6062 0010, 5 6099 0020 and 5 6054 0010)
71"
M42 Cobalt Steel SuperBand™ Saw Blades
Electric Band Saws
9"Cutting Capacity
23• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Model 5 1212 0050
AIR
ATEX ClassifiedATEX Classified
Model 5 1215 0070
ELECTRIC
• Cold cutting of large pipe, structural steel, tanks, profiles and more
• Compact size for cutting in confined spaces
• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts
Hacksaw Accessories
5 1207 99105 1202 99605 1207 8910 5 1207 89705 1208 9980
5 1208 9990
Model No. Cutting Dia. Clamp Type
2" to 6"4" to 123/4"*Up to 21"
215/8" x 113/8"Up to 123/4"*
Up to 123/4"*
Pipe ClampPipe ClampBlade GuideProfile Clamp
Automatic - Self-feedingClamp (for pneumatic saws)
Automatic - Self-feeding (forelectric and hydraulic saws)
* Cut up to 30" OD with two extension chains (order 2x P/N 5 1201 9030)
Hacksaw Blades – 8" to 37" length Hacksaw Clamps and Guide
Z22-9 HSSZ22-10 HSSZ22-11 HSS
Z22-6 HSSZ22-6 HSS-SL*Z22-31 HSS
Z22-7 HSSZ22-29 HSSZ22-33 HSS
Z22-72 HSS
Z22-30 HSSZ22-30 HSS-SL*
Z22-73 HSSZ22-74 HSS
Z22-75 HSSZ22-75 HSS-SL*
Z22-37 HSS
Order No. MaterialMax.Dia.of CutLength Teeth/
InchThick-ness
8"8"8"
12"12"12"
16"16"16"
20"
21"21"
24"24"
30"30"
37"
81624
161612
1686
14
1212
148
1212
12
Steel/Alum.Steel
Sheet Metal
SteelStainless Steel
Steel
SteelSteel/Alum.Cast Iron
Steel
SteelStainless Steel
SteelSteel/Alum.
SteelStainless Steel
Steel
1/16" 1/16"1/16"1/16"1/16"1/16"1/16"1/16"1/16"5/64"1/16"1/16"5/64"5/64"5/64"5/64"5/64"
31/8" 31/8" 31/8"
65/8" 65/8"65/8"
105/8"105/8"105/8"
145/8"
155/8"155/8"
181/2"181/2"
247/8"247/8"
317/8"
Dimensions
* Use HSS-SL Blades for best cutting performance on stainless steel andhard metal. Blades for plastic, wood and masonry also available.
Cold cutting of large pipe up to 30" diameter and structural steel – on siteIdeal for a wide range of industries, including refineries, chemical plants,utilities, construction, offshore oil, mining, marine and demolition
5 1212 00105 1212 0050
5 1215 0070
1/2"1/2"
RollLever
ModelNumber
Weight(lbs.)
Air Consumption: 51 CFMAir Pressure: 90 PSI
100-350100-350
23/8"23/8"
Strokesper Min.
BladeStroke HoseThrottle
Pneumatic – 3/4" ID NPT Air Connection
CableTrigger 110V/60 Hz
Motor Specifications
200-400 23/8"
15.415.4
13
Electric – 11 Amps / 110 Volt (Also available as 220 Volt/50 Hz)
5 1220 0050 1/2" IDLever
1.5 HP1.5 HP
Power
1.5 HP
3.8 HP 100-500 23/8" 13.5
Hydraulic – 1/2" FF (HTMA) Couplings
Oil Flow: 4 GPM at 2000 PSI
Power Hacksaws Air • Electric • Hydraulic
Model 5 1220 0050
HYDRAULIC
Model 5 1202 9960Pipe Clamp for 4" to 12 3/4" dia.*
Model 5 1208 9980 Self-feeding Pipe Clampfor up to 12 3/4" dia. pneumatic saws*
Model 5 1208 9990 Self-feeding Pipe Clamp forup to 12 3/4" dia. electric and hydraulic saws*
Chain Saws Pneumatic • Hydraulic
5/8"5/8"
21"25"
ModelNumber
Weight(lbs.)
4 HP, 92 CFM @ 90 PSI4 HP, 92 CFM @ 90 PSI
37"41"
3/4" NPT (ID)3/4" NPT (ID)
Lengthwith Bar
AirConnection Hose ID
CuttingCapacity
5 1008 Series – Underwater Air Chain Saw with Chain Guard (15", 17", 21" and 25" bar lengths available)
5 1026 Series – Cutting Wood, with Brake (17", 21" and 25" bar lengths available)
Motor Specifications
2931
Series 5 1008
Saws available with 10", 15", 17" , 21" and 25" bar lengths• Pneumatic power is safer than gas or electric in hazardous atmospheres
and wet environments, including underwater applications• Low maintenance and easy startup – saw chain and motor are
automatically oiled by two separate lubricating systems
• Powerful 4 HP motors at 90 PSI air pressure, 92 CFM
• Standard with .404 pitch Super Chisel saw chain
• Optional carbide-tipped and ripping saw chain available
Includes exhaustvalve and chainguard to protectoperator.
Series 5 1026, 5 1027 & 5 1028
Includes chain brake to stop chain during kickback or for repositioning saw during cutting.
ATEX ClassifiedATEX Classified
5 1008 00305 1008 0040
5/8"17"4 HP, 92 CFM @ 90 PSI 33" 3/4" NPT (ID) 255 1026 0010
5 1027 Series – Cutting Plastic, with Brake and Water Feed System (17", 21" and 25" bar lengths available)
5/8"21"4 HP, 92 CFM @ 90 PSI 37" 3/4" NPT (ID) 285 1027 0020
5/8"5/8"
17"25"
4 HP, 92 CFM @ 90 PSI4 HP, 92 CFM @ 90 PSI
33"41"
3/4" NPT (ID)3/4" NPT (ID)
5 1007 Series – General Use Air Chain Saw with Chain Guard (15", 17", 21" and 25" bar lengths available)
2531
5 1007 00105 1007 0040
5 1028 Series – Underwater Air Chain Saw with Brake (17", 21" and 25" bar lengths available)
5/8"25"4 HP, 92 CFM @ 90 PSI 41" 3/4" NPT (ID) 315 1028 0040
Pneumatic Chain Saws – Powerful, efficient cutting of wood and plasticUsed successfully for many years in petrochemical industries, marine applications, utilities, underground mines and polyethylene plants
Hydraulic Pistol Grip Chain SawsIdeal for use in utilities, subsea, mines,construction and agriculture
Model ACH000-12 Pistol Grip Saw Motor Power Up to 6.5 HP Oil Flow: 3-8 GPM @ 2000 PSI
Handle Pistol Grip
Overall Length 23" (with bar)
Bar Length 12" (14" and 16" optional)
Weight 5.8 lbs.
Hose Connection 3/8" JIC 37˚
For 14" bar, order no. ACH000-14For 16" bar, order no. ACH000-16
24 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Series 5 1007
5 1005 Series – Utility Air Chain Saw - Compact, Lightweight and Powerful
3/8"10"1.2 HP, 30 CFM @ 90 PSI 21" 1/4" NPT (ID) 5.45 1005 0010
• Up to 6.5 HP, high-torque gear motor
• Open/closed hydraulic system
• 12", 14" and 16" bar lengths available
• Pistol grip with safety trigger lock andinsulated handle
• Optional hose swivel to eliminatetangled hoses (at left - P/N 640080)
Hydraulic- and pneumatic-poweredtools for use in subsea applications
1 1580 0060 Underwater Hydraulic Horizontal Grinder, 1.3HP, 6400 RPM, Twist throttle,straight grinding wheels
1 1585 0010 Underwater Hydraulic Angle Grinder, 1.3HP, 3600 RPM, Lever throttle,grinding wheels up to 7"
2 2404 0030 Underwater Air Rotary Hammer Drill, SDS Plus, 1" cap. in concrete, 0-3000 BPM, .5 HP, 90 PSI / 21 CFM
2 2417 0010 Underwater Air Rotary Hammer Drill, SDS Max, 2" cap. in concrete, 0-2500 BPM, 1.2 HP, 90 PSI / 21 CFM
2 2406 0010 Underwater Hydraulic Rotary Hammer Drill, SDS Plus, 1" cap. in concrete, 0-3400 BPM, .8 HP
2 2418 0010 Underwater Air Rotary Hammer Drill, SDS Max, 2" cap. in concrete, 2500 BPM, 1.75 HP
2 1317 0030 Underwater Hydraulic Core Drill, 3" max. dia., 3.6 HP, 380/900/1800 RPM
2 1335 0010 Underwater Pneumatic Core Drill, 3" max. dia., 3.8 HP, 300/700/1350 RPM
Other Underwater Tools Available:Woodboring Drills - Pneumatic See page 16
Reciprocating Saws - Hydraulic and Air See page 20
Hacksaws - Hydraulic See page 23
Chain Saws - Air and Hydraulic See page 24
Portable Magnetic Drills - Hydraulic See page 30
Grinders - Hydraulic
Rotary Hammer Drills - Hydraulic and Pneumatic
Core Drills - Hydraulic and Pneumatic
Impact Wrenches - Hydraulic and Pneumatic6 1316 0070 3/4" Air Impact Wrench, 1-1/8" (M 30) max. bolt size,
995 ft-lbs. torque
6 1316 0060 1" Air Impact Wrench, 1-1/8" (M 30) max. bolt size, 995 ft-lbs. torque
6 1515 0010 3/4" Hydraulic Impact Wrench, 1" (M 27) max. bolt size, 1220 ft-lbs. torque
6 1520 0010 1" Hydraulic Impact Wrench, 1-3/8" (M 36) max. bolt size, 1840 ft-lbs. torque
ATEXATEX
Underwater Tools Hydraulic • Pneumatic
25• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Caution: User must follow all appropriate safetyregulations when choosing a tool for their particularworking environment.
Reduced Sparking Diamond Grinding & Cutting Discs
26 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
• Last 100x longer than ordinary resin bonded wheels
• Reduce sparks, dust and material waste
• Save time changing discs
Ideal for grinding and cutting steel, stainless steel, aluminum,titanium, fiberglass and other materials
EB Cut Off Wheels – "Slicer" for cutting metal and moreEco Brazing (EB) diamond cutting wheels from CS Unitec are designed for cutting steeland stainless steel pipe, tubing, bolts and plate, as well as composites, fiberglass andother materials.
EBC4007850C 4" x 7/8" 50 13,000 RPM 1 discEBC4507830C 4-1/2" x 7/8" 30 13,000 RPM 1 disc EBC4507850C 4-1/2" x 7/8" 50 13,000 RPM 1 discEBC5007850C 5" x 7/8" 50 13,000 RPM 1 disc
EBC6007830C 6" x 7/8" 30 8500 RPM 1 discEBC6007850C 6" x 7/8" 50 8500 RPM 1 discEBC7007850C 7" x 7/8" 50 8500 RPM 1 discEBC9007850C 9" x 7/8" 50 8500 RPM 1 disc
EB4007835CM 4" x 7/8" 35 13,000 RPM 1 discEB4007850CM 4" x 7/8" 50 13,000 RPM 1 discEB4507835CM 4-1/2" x 7/8" 35 13,000 RPM 1 discEB4507850CM 4-1/2" x 7/8" 50 13,000 RPM 1 discEB5007835CM 5" x 7/8" 35 13,000 RPM 1 discEB5007850CM 5" x 7/8" 50 13,000 RPM 1 disc
EB7007835CM 7" x 7/8" 35 8500 RPM 1 discEB7007850CM 7" x 7/8" 50 8500 RPM 1 disc
EB Combination (Grinding – Cutter) WheelsEco Brazing (EB) diamond combination metal grinding and cutting wheels from CSUnitec are designed for grinding and cutting steel and stainless steel bolts and plate.
EB4007880CLSF 4" x 7/8" 80 13,000 RPM 1 discEB4507880CLSF 4-1/2" x 7/8" 80 13,000 RPM 1 discEB5007880CLSF 5" x 7/8" 80 13,000 RPM 1 disc
EB6007880CLSF 6" x 7/8" 80 8500 RPM 1 discEB7007880CLSF 7" x 7/8" 80 8500 RPM 1 disc
EB Cluster (Cleaning – Grinding) WheelsEco Brazing (EB) diamond cluster wheels from CS Unitec are designed for removingpaint, rust and epoxy on metal. Also for high material removal on fiberglass, compositesand plastics without loading up like traditional abrasives.
Order No. Size (dia. x arbor) Grit Max. Speed Quantity
Order No. Size (dia. x arbor) Grit Max. Speed Quantity
Order No. Size (dia. x arbor) Grit Max. Speed Quantity
Caution: User must follow all appropriate safetyregulations when choosing a tool for theirparticular working environment.
Follow all appropriate safety regulations (ATEX,OSHA, ANSI, etc.) for all grinding applications,including those for working in hazardousenvironments. Follow all appropriate OSHA andinternational safety regulations for grinding metal,fiberglass, hard plastics and more.
Axial Fans and Air Movers Pneumatic • Electric
27• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Highly efficient, explosion-proof unitsfor ventilating, exhausting and cooling
Explosion ProofFor use in Ex Zones and
Hazardous Environments.Electric fan motors areintrinsically safe, Ex.
8 1020 SeriesElectric Axial Fans withprotective grille on inletside, 2118 cfm output
Optional Axial Fan Accessories include:Mounting Flanges for fitting fans to flanged pipes for suction or discharge (shown at right)Protective Grilles for use on non-ducted fansAntistatic Items including Connectors, Quick-Seal Couplings and Plastic DuctingContact CS Unitec for more information.
8 1524 030024" dia. Pneumatic Axial Fan, 12,353 cfm output @ 90 psi
W70 6" dia. Pneumatic Air Mover3000 cfm output @ 90 psi
Explosion-Proof Axial FansPneumatic and Electric12" to 24" diameter
Caution: User must follow allappropriate safety regulationswhen choosing a tool for theirparticular working environment.
Explosion-Proof Pneumatic Axial Fans and Air Movers
8 1521 0300 Axial Fan 12" Pneumatic 3240 cfm 90 psi 48.5 lbs 1018 1522 0300 Axial Fan 16" Pneumatic 5720 cfm 90 psi 70.4 lbs 928 1523 0300 Axial Fan 20" Pneumatic 9170 cfm 90 psi 101.2 lbs 908 1524 0300 Axial Fan 24" Pneumatic 12,353 cfm 90 psi 127.6 lbs 868 1603 0300 Axial Fan 12" Pneumatic 2119 cfm 90 psi 28.6 lbs 85
W40 Air Mover 4" Pneumatic 1140 cfm 90 psi 11 lbs 91W70 Air Mover 6" Pneumatic 3000 cfm 90 psi 22 lbs 91 8 1620 0010 Air Mover 7" Pneumatic 2366 cfm 90 psi 8 lbs 104
8 1020 0140 Axial Fan 12" 230/400 V 50Hz 3-phase 2118 cfm 44 lbs 86 Ex II 2 GcT38 1020 0840 Axial Fan 12" 110 V 50 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT38 1020 0850* Axial Fan 12" 110 V 50 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT38 1020 0860* Axial Fan 12" 110 V 50/60 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT38 1020 0870 Axial Fan 12" 230 V 50 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT3
* with switch and cable
Order No. Description Diameter Power Volume Output Air Pressure Weight dBA
Explosion-Proof Electric Axial FansOrder No. Description Diameter Power Volume Output Weight dBA ATEX Class
Ideal for ship holds, underground mining, shipyards, refineries,petrochemical plants, oil platforms, power plants, tunneling,construction and more.
8 1620 00107" dia. Pneumatic Air Mover,2366 cfm output @ 90 psi
Non-Sparking, Non-Magnetic Safety Hand Tools
28 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Copper-Beryllium Tools (CuBe2) help fulfill the demand in the ATEX Directive 94/9/EC for work in Zones 0, 1 and 2 (Gas, Mists or Vapors); Zones 20, 21 and 22 (Dusts); and M1 and M2 for mining.
Aluminum-Bronze Tools (AlBr) help fulfill the demand in the ATEX Directive 94/9/EC for work in Zones 1 and 2 (Gas, Mists or Vapors), plus Zones 21 and 22 (Dusts).
Choosing the Correct Alloy for Your Application
Aluminum-Bronze (AlBr) Alloy Copper-Beryllium (CuBe2) Alloy
Zone Compatibility
Hardness
Durability
Magnetic Properties
Composition
Help fulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22
23-35 HRC
Not as durable as CuBe.
Low magnetism due to minimal ferrous components.Appropriate for non-critical non-magnetic applications.
Al: 9.5-11% Ni: 3.5-5.5% Cu: BalanceFe: 3.5-5.5% Other: 0.5% max
Caution: User must follow all appropriate safety regulations when choosing a tool for their particular working environment.MSDS (Safety Data Sheet) is available upon request. WARNING: Safety tools should not be used in contact with Acetylene.WARNING: Safety tools must only be ground or resharpened by companies approved for grinding such material, according to OSHA regulations.
CS Unitec offers a complete line of High-Quality Non-Sparking, Non-Magnetic and Corrosion-ResistantSafety Tools. CS Unitec is a leader in special CopperAlloy Safety Hand Tools manufactured for use in high-risk areas where a spark can create a disaster.
Gas, Mists or Vapors� Zone 0 - An atmosphere where a mixture of air and flammable
substances in the form of gas, vapor or mist is present frequently,continuously or for long periods.
� Zone 1 - An atmosphere where a mixture of air and flammablesubstances in the form of gas, vapor or mist is likely to occur in normaloperation occasionally.
� Zone 2 - An atmosphere where a mixture of air and flammablesubstances in the form of gas, vapor or mist is not likely to occur innormal operation but, if it does occur, will persist for only a short period.
Zone DefinitionsDusts� Zone 20 - An atmosphere where a cloud of combustible dust
in the air is present frequently, continuously or for long periods.
� Zone 21 - An atmosphere where a cloud of combustible dustin the air is likely to occur in normal operation occasionally.
� Zone 22 - An atmosphere where a cloud of combustible dust in the air is not likely to occur in normal operation but,if it does occur, will persist for only a short period.
For use in Ex Zones, ATEX Zones and Hazardous Environments where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present
Help fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22
33-45 HRC
Very durable due to high hardness and tensile strength.
Non-ferrous components; safer for applicationsdemanding non-magnetic properties.
Be: 1.8-2.1% Other: 0.5% maxCo + Ni: 0.6% max Cu: Balance
Non-Sparking, Non-Magnetic Safety Hand Tools
29• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Available Non-Sparking, Non-Magnetic Tools Include:
Ideal for oil drilling platforms, petrochemical plants, oil refineries, natural gas installations, ammunitionplants, varnish factories, sugar refineries, grain silos, mining and other industries where non-sparkingsafety tools are required. The non-magnetic feature of these alloys also makes them ideal for workingon special machinery with powerful magnets such as MRI machines, military de-mining and explosives.
Angle Tracing Point Ex1302Axe Ex1201Bars Crow Ex1303 Pinch Ex1301Brushes Straight Handle, Scratch Ex1001 Flat Back, Scratch Ex1002Caulking Tool Ex308A, Ex308BChisels 6-Point Ex304A 8-Point Ex304S Bull Point Ex306, Ex318R, Ex320R Cape Ex305 Chipping Hammer Ex314 Clay Spade Ex340 Diamond Point Ex307 Hand Ex304 Paving Breaker Ex318F, Ex320F Pneumatic Ex309AH, Ex310AH Scaling Ex312, Ex380SHClamps C-Type Ex901 Grounding Ex211Crate Opener Ex113SDrifts Cylindrical Ex301 Pin, Straight Type Ex301CDust Pan Ex1004Files Flat, Bastard Ex411F Half Round, Bastard Ex411 Round Ex411RFlange Spreader Ex1102Fork, Garden Ex1010Hammers Ball Peen Ex101 Bricklayers' Ex112 Claw Ex122 Club Ex108 Cross Peen Engineers' Ex102 Cross Peen,Engineers'/Blacksmiths' Ex1041 Cutoff Ex105 Double-face Machinists' Ex103 Plastic Ex121 Scaling Ex106 Sledge Ex104 Sledge (German Type) Ex6475Hatchet Ex1202Hoe, Planters'/Mixing,Angled Blade Ex1015Knives Common Ex409, Ex410, Ex410S Putty/Hand Scraper Ex408Needle, for Air Needle Scalers Ex308A
Pick Railroad or Clay Ex1008Pipe Cutter Ex1512Pliers Adjustable Combination Ex605 Cutting Ex603 Diagonal Cutting Ex601 Diagonal Cutting, Heavy Duty Ex601HD Flat Nose (DIN ISO 5745) Ex606 Groove Joint Ex604 Lineman's, Side Cutting Ex612 Long-Nose w/Side Cutter(DIN ISO 5745) Ex611 Pipe Ex602 Round Nose (DIN ISO 5745) Ex607 Swedish (DIN 5234) Ex505Punches Center Ex303 Pin Ex301PRake Ex1009Ruler Ex1601Saws Hand Ex119 Hacksaw Frame Ex118A Hacksaw Blade Ex118BScissors Ex609Scrapers Angle Ex402 Deck Ex405 Flat Ex401 Long Blade Ex407 Plate Ex406 Triangular Ex403Screwdrivers Offset Ex802 Phillips Ex803 Standard Ex801 Striking Ex801SScriber/Marking Tool Ex302Shears, Cutting Ex608Shovels Round Point w/Long Handle Ex1006 Spade, Edging Ex1007 Square Point w/Long Handle Ex1005Sockets 1/4" drive Ex1503AA 3/8" drive Ex1503A 1/2" drive Ex1503B 3/4" drive Ex1503C 1" drive Ex1503D Adapter/Converter Ex1509 Deep Impact, 3/8" drive Ex1820 Deep Impact, 1/2" drive Ex1830 Deep Impact, 3/4" drive Ex1840 Deep Impact, 1" drive Ex1850 Deep Impact, 1-1/2" drive Ex1860 Driver Handle Ex1504S Extension, Bar Ex1504
Sockets (continued) Impact, 3/8" drive Ex1720 Impact, 1/2" drive Ex1730 Impact, 3/4" drive Ex1740 Impact, 1" drive Ex1750 Impact, 1-1/2" drive Ex1760 Joint, Universal Ex1507 Offset Grip Handle Ex1508 Sliding, Bar Ex1502 Standard Deep, 1/4" drive Ex1610 Standard Deep, 3/8" drive Ex1620 Standard Deep, 1/2" drive Ex1630 Standard Deep, 3/4" drive Ex1640 Standard Deep, 1" drive Ex1650Spatula Ex408STweezer Ex610, Ex610SValve Wheel Hook Ex207FVise, Parallel Ex902Wedges Banana Ex1101B Flange Ex1101 Stone Ex107Wrenches Adjustable End Ex501 Allen/Hex Key(Ball Point, Long Type) Ex209L Allen/Hex Key (DIN 911) Ex209 Box End (12 pt., DIN 3111) Ex204D Box End (6-point) Ex204 Box End, Double,Offset (12-point) Ex202F Box End, Double,Straight Type (12-point) Ex202 Box End, Single (12-point) Ex201 Box, for Extension Ex215 Bung Ex110, Ex110ES Ex110S, Ex213 Chain Pipe Ex600 Combination Ex206 Construction,Open End, with Pin Ex205S Construction,Ring End, with Pin Ex204S Extension for Box Wrench Ex216 Crowfoot Ex1514B Gas Tube Ex212 Handle, Speed Ex1505 Handle, Hinged Ex1506 Monkey Ex503 Open End Ex205 Open End, Double Ex203 Pipe (American Type) Ex502 Ratchet Ex504S, Ex1501S Socket, L-Type (6-point) Ex701 Socket, T-Type (12-point) Ex702 Spanner Adjustable Ex208S Spanner, Fixed (DIN 1810) Ex208 Striking Box(12-point, DIN 7444) Ex201B Striking Box, Offset (12-point) Ex201F Striking, Open End Ex200 Torque Ex1401TB Valve Ex207 Valve Wheel (DIN 87311) Ex207S
Description Part# Description Part# Description Part#
The following kits are also available:5-Piece (Ex2204-Kit)7-Piece (Ex2206-Kit)11-Piece (Ex2211-Kit)24-Piece (Ex2000-Kit)28-Piece (Ex1500-Kit)
Allen Wrench (Ex209-Kit)Combination Wrench (Ex206-Kit)HazMat (Ex2300-Haz)Marine (Ex2200-Kit)Screwdriver (Ex801-Kit)
Socket, 1/4" drive, 15-pc. (Ex1520-Kit)Socket, 1/2" drive, 20-pc. (Ex1530-Kit)Socket, 1/2" drive, 10-pc. (Ex1535-Kit)Socket, 3/4" drive, 16-pc. (Ex1540-Kit)
Portable Magnetic Drills Electric • Pneumatic • Hydraulic
30 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Cut up to 5-1/8" • Twist Drill up to 1-3/4" • Tap up to 1-5/8"
Unique features of CS Unitec's portable magnetic drill line:
Fast, accurate hole cutting… on the job site or in the shop!Designed for continuous operation, CS Unitec's portable magnetic drillsare ideal for drilling structural steel and virtually any metal. We offer acompact, powerful and reliable range of portable magnetic drills forholes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use inconstruction and industry.
• Variable-speed, multiple-geared models• Reversible motors for tapping and machining• Swivel base stand for hard-to-reach areas• Low-profile, compact for drilling in tight spaces• Manual or automatic feed• Lightweight – from 24 lbs.
For a comparison chart of our full line ofportable magnetic drills, see pages 32-33.
MAB 1300ø 5-1/8" cutter capacityø 1-3/4" twist drill capacityø 1-5/8" tapping capacityReversible, 4-gear motorThe ultimate in power MAB 150
ø 1-1/2" cutter capacityFor drilling in tight spaces
MAB 525ø 2-1/2" cutter capacityø 1" twist drill capacity
ø 15/16" tapping capacityReversible, 2-gear motor
MAB 825 & 845ø 4" cutter capacityø 1-1/4" twist drill capacityø 1-1/8" tapping capacitySwivel base (MAB 845)Reversible, 4-gear motor
HB-4400Hydraulic powerø 2-1/16" cutter capacityø 1/2" twist drillFor marine, construction and underwater applications
AIRBOR™ AB-4300Pneumatic powerø 2-1/16" cutter capacityø 1/2" twist drillATEX for hazardous environmentsCountersinkingReaming
TappingTwist Drilling
LubricantsNon-toxic ProLube™ Lubricants prolong tool life by reducing friction and wear
Pilot Pins, Drill Chucks and Tapping ToolsWide variety for cutting, twist drilling and tapping
Arbors and ExtensionsManual and automatic cooling models, as well as quick-lock, no-tools arbor; extensions extend cutter reach up to 18"
Drilling Starter Kits
MOBIL CLAMPConvert magnetic drilling machine to bench drill
Drilling Stand and ViseConvert hand drill to drill press
Vacuum PlatesFor channeled plates and smooth surfaces
Pipe Saddle Clamp SystemSafe, secure drilling of pipes and tubular material
Annular Cutters and Accessories
31• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Also available: Cobalt CuttersLarge-diameter CuttersCarbide-tipped Hole SawsUnibroach® Stack Cutters
6-Series HSS Unibroach™ Annular Cutters Fully ground high-speed steelCutting depth: 1" 2" 3" 4"
Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8" 3/4" - 5-1/8"
8-Series ARMOR-PLATED Unibroach™ Annular Cutters
Fully ground high-speed steel with TiAlN hard coating – for higher working tempsCutting depth: 1" 2" 3"
Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8"
9-Series Unibroach™ TCT Hornet Annular Cutters
Sintered carbide with Tungsten Carbide tipsCutting depth: 1"* 2-3/8" 3-3/8"
Drilling ø: 1/2" - 2" 1/2" - 5-1/8" 3/4" - 5-1/8"
* 1-3/8" depth for diameters larger than 1-1/2"
Accessories for hole cutting, twist drilling, tapping and more
Annular Cutters for burr-free finished holes,without predrilling or step drilling
Portable Magnetic Drill Comparison Chart
MDM 40 MAB 150 MAB 425 MAB 455 MAB 485 MAB 525 MAB 825MAB 845
MAB 1300
Annular CuttersDiameter (ø)
up to ø 1-1/2" up to ø 1-1/2" up to ø 1-3/8" up to ø 2" up to ø 2" up to ø 2-1/2" up to ø 4" up to ø 5-1/8"
Twist DrillsDiameter (ø)
up to ø 5/8" up to ø 7/8" up to ø 7/8" up to ø 1" up to ø 1-1/4" up to ø 1-3/4"
TappingDiameter (ø)
up to ø 15/16" up to ø 15/16" up to ø 1-1/8" up to ø 1-5/8"
CountersinkingDiameter (ø)
up to ø 1-9/16" up to ø 2" up to ø 2" up to ø 3"
ReamingDiameter (ø)
up to ø 3/4" up to ø 7/8" up to ø 1-1/4" up to ø 2"
Stroke 3-1/8" 1" 6-1/3" 6-1/3" 6-1/3" 6-1/3" 10" 3.35"(12" w/out retainer)
Weight 24 lbs. 24 lbs. 29 lbs. 29 lbs. 29 lbs. 35 lbs. 55 lbs. 112 lbs.
Speed Range 1(RPM)
440 400 430 250 50-250 70-280 40-110 30-80
Speed Range 2(RPM)
760 450 100-450 180-580 65-175 50-120
Speed Range 3(RPM)
140-360 130-350
Speed Range 4(RPM)
220-600 210-550
� � � �
� � � �
� � � � � �
Electronic SafetyShutoff Sensor
� � � � � �
Tool Holder Set Screw Set Screw Set Screw Quick-changekeyless
Quick-changekeyless
Quick-changekeyless
Quick-changekeyless
Set Screw
Morse Taper (MT) MT2 MT2 MT3 MT3 MT4
Safety FrictionClutch
� �
Torque Control � � �
Swivel Base �
Magnet Size 6-1/2" x 3-1/4" 6-5/16" x3-3/16"
6-5/8" x 3-1/3" 6-5/8" x 3-1/3" 6-5/8" x 3-1/3" 7-1/8" x 3-1/2" 8-5/8" x 4-1/3" 14" x 4-3/4"
SafeMagSystem
CoolMAGCoolMag
32 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Max. hole diameter up to 5-1/8"
Max. twist drilling up to 1-3/4"
Max. tapping up to 1-5/8"
PneumaticHydraulic
Allows thread cutting
Overheating protection
Magnet adhesion indicator
Shuts down motor ifmagnetic contact lost
Swivel base through 30˚ and 3/4"
AIRBOR™
HB 4400
AutoMAB1500
CSU 32ACCSU 32RL
CSU 50ACCSU 50RL
CSU 80AC
CSU 100/3
up to ø 2-1/16" up to ø 2-1/16" up to ø 1-1/2" up to ø 1-1/4" up to ø 2" up to ø 3-3/16" up to ø 4"
up to ø 1/2" up to ø 1/2" up to ø 1/2" up to ø 7/8" up to ø 1-1/4" up to ø 1-1/4"
up to ø 3/4"
(CSU 32RL only)
up to ø 15/16"
(CSU 50RL only)
up to ø 1-1/8"
up to 10-1/4" 3-3/4" 3" 5-3/4" 6" 10" 10"
43 lbs. 48-1/2 lbs. 37-1/2 lbs. 24 lbs. 29 lbs. 57 lbs. 57 lbs.
400 0-630 360 450 250 100 40-140
450 175 120-480
245
385
�(CSU 32RL only)
�(CSU 50RL only)
�
� � � �
� � � �
� � � �
Set Screw Set Screw Set Screw Set Screw Quick-changekeyless
Quick-changekeyless
Quick-changekeyless
MT2 MT3 MT3
� � � � �
8-3/4" x 3-1/2" 7-1/4" x 3" 7-1/8" x 3-1/2" 6-5/16" x 3-1/4" 6-1/2" x 3-1/2" 9" x 4-3/8" 9" x 4"
SpecialFeaturesSpecial
Features
33• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Grind In Corners!Grind In Corners!
Linear Grinders and Pipe Sanders
34 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Electric orPneumatic
Abrasive mounting system saves time, reduces cost and eliminatesvibration! No-tools changeover of grinding and polishing wheels –wheels and accessories slide onto the finned, rubber shaft and securethemselves when machine turns. A wide selection of hollow-core slip-onabrasives is available for the PTX Eco Smart.
Abrasive grinding, surface conditioning fleece, ceramicgrinding, TZ pyramid and Super Polish belts available.
Exact belt size is 40mm x 780mm (1.5" x 30.7").Contact CS Unitec for more information.
PTX Eco Smart Linear GrinderThe professional surface finisher forhard, continuous use• Multifunctional grinding and polishing system for flat surfaces and open
or closed pipe constructions
• Grind from coarse to shadow-free matte finish, up to a mirror polish
• Remove welds, deep scratches, oxidation and rust
• Ideal for stainless steel, steel and nonferrous metals includingaluminum, brass, bronze and copper, as well as wood and rigid plastic
• Complete line of grinding wheels, belt sleeves, special brushes,polishing and maintenance abrasives available
PIPE-MAX Pipe Belt GrinderCombination pipe belt sander andgrinder for diameters up to 14"• Sand pipes from small to large diameter, up to 14"
• Follows handrail contours to grind and polishup to a high-gloss finish
• Remove weld seams from flat surfaces, leaving no edges
• Ideal for stainless steel, aluminum and high-quality metals
• Powerful 14.5 Amp motor and variable-speed control from950 to 3500 RPM (3/4HP pneumatic model available)
• Complete line of grinding wheels, belt sleeves, specialbrushes, polishing and maintenance abrasives available
PTX Eco Smart SpecificationsOrder Number 47002A
Power 15.5 Amp (1710 Watts), 110 V / 60 Hz (230 V / 60 Hz available)
Variable Variable speed control from 1000 to Speed 3800 RPM with tachogenerator for constant speed, even under load
Speed With fine adjustment for using Control Dial abrasives at optimum efficiency
Wheel Width up to 4" (or 6" wide abrasives)
Wheel Dia. up to 4-1/2"
Weight 7.25 lbs. (3.3 kg)
PIPE-MAX SpecificationsOrder Number 38502A
Power 14.5 Amp (1600 W) 110V (220 V also available)
Belt Size (LxW) 30.7" x 1.6"
Belt Speed 33 - 100 ft./sec.
Pipe ø max. 14"
Weight 11.25 lbs.
Electric orPneumatic
HIPPO Mixing Station and Mixing Drills
35• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Professional, Heavy-duty, Hand-held Mixers for Fast, Efficient MixingFrom self-leveling compounds to prefab mortar, CS Unitec has a portable mixer todo the job quickly. Every CS Unitec mixer has been designed for high reliability, withthe power to provide optimum blending of construction materials on the job site.
Mix, Transport and Pour Directly Onto the Floor!
PMH 70X-RL for Rough TerrainRimless Bucket and Removable Liner
Electric 110 Volt AC
16 Amp/1800 Watt2-speed Motor
1st Gear: 140 RPM(Load Speed)
2nd Gear: 470 RPM(Load Speed)
Model No. Motor Specifications
PMH 70F for Level FloorsWith Rimmed Bucket
PMH 70X for Rough TerrainWith Rimmed Bucket
PMH 70F-RL for Level FloorsRimless Bucket and Removable Liner
Multiple Batch Mixing with Removable LinerMixing multiple batches is easier and faster with the new, removable liner and rimless bucket system.
• Mix consecutive batches without downtime• Resilient, pliable liner is easily cleaned• Alternating liners prevents cross contamination• Extends life of bucket
The HIPPO is also available with a Pneumatic-powered Mixing Motor2.2 HP, 90 PSI/67 CFM, 2 speeds (190/420 RPM)PMH 70F-AIR-RL; PMH 70X-AIR-RL; PMH 70F-AIR; PMH 70X-AIR
Bowl Capacity:5 x 40 lbs. mix+water (20 gal /290 lbs.)5 x 20 kg mix+water (80 liters/130 kg)
Motor Mounting:Reversible for "alongside" mixing
Tilting Cradle:Balanced for easy operation
Weight: 99 lbs.
The PORTAMIX HIPPO features:• Easy operation – one person can mix, transport
and pour 5 bags or 20 gallons• Accurately place material directly onto the floor• Produces excellent mix consistency• Ideal for mixing and dispensing into 5 gallon containers• Pre-tinted material is easily blended
After mixing the first batch, the liner can be removed andcleaned. To speed up production, a second liner can beused while the first liner is being cleaned. The use of a lineralso helps to prevent cross contamination and minimizeswear to the HIPPO bucket, extending its life.
PortableMixingStands
Save time byrunning mixersindependently
Model 25GP-WD Model RST 91
CS Unitec offers three air-powered models that
are inherently saferfor mixing paint, glue,
epoxy, mortar, concrete,refractory cement and other
materials in shipyards and the oil andgas industries. They can be usedaround water with no fear of shock orblown circuitry. Contact us for details.
Air-Powered Mixers forHazardous Environments
Model No.
0-450
250-580
0-450
100-275
9
11.5
15
15
9.5
10.5
10.5
14.5
EHR 18 S
EHR 20 R
EZR 22 R/RLTwin Paddle
EHR 23/1.3R
MotorPower (Amps)
LoadSpeed (RPM)
2 bags/20 gal.
3 bags/25 gal.
5 bags/25 gal.
5 bags/35 gal.
CapacityWeight(lbs.)
SuitablePaddles
WG 120MG 120RG 120
WG 135MG 140
TWP 140
P/N31610000(included)
WG 160MG 160
TWP 160
700lbs./hr.
900lbs./hr.
1200lbs./hr.
1800lbs./hr.
Max.Output
EZR 22 R/RLPush-pull Mixer:Quick, thoroughmixing with twin
paddles andclockwise/
counterclockwiserotation
EHR 18 SIncludesWG 120paddle
EHR 20 R EHR23/1.3R
CS Unitec, Inc. specializes in industrial power tools and safety tools for construction and industry.Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented the first pneumaticportable band saw. CS Unitec has added to its list of industry firsts with the widest range of portable magnetic drills and hand-heldconcrete core drills. The line also includes surface preparation tools for metal, concrete and masonry, air, electric and hydraulicportable band saws, reciprocating saws, hack saws, nut runners, rotary hammer drills, rolling motors, non-sparking safety tools,portable mixers and dust extraction vacuum systems.
Also Available from CS Unitec
CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email [email protected] • www.csunitec.com
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2013, CS Unitec, Inc., 10-13-7500
View product demonstrationsat www.csunitec.com.
… the power of innovation!®
Portable Magnetic Drills:Magnetic Drills & Accessories
Hand-held Drills and Drive UnitsNut Runners
Hammer Drills and more
Surface Finishing Tools:High-performance tools and accessories
for grinding, sanding, polishing,deburring and beveling stainless steel,
steel, nonferrous metals, wood and more
Non-Sparking Hand Tools:Non-sparking Hand Tools
Power Tools for use in Ex Zones, ATEXZones and Hazardous Environments
Portable Saws:Hacksaws
Reciprocating SawsBand SawsChain SawsCut-off Saws
Concrete Tools:Surface Preparation Tools
Concrete GrindersDust Collection Systems
Diamond Core DrillsAir Concrete Saws
Portable Mixers:Portable Mixers and Mixing Stations
for Mortar, Concrete, Plaster,Flooring Adhesives, Grout, Coatings,Paint, Self-Leveling Compounds and
other Cementitious Materials
For tool specifications and ATEX and Ex Zoneinformation, visit www.csunitec.com.
Call 1-800-700-5919 or 203-853-9522 to requestany of the catalogs shown below.
View demo videos atwww.csunitec.com