ISO Update September 2014 Update, Supplement to ISO Focus -- September 2014 1 International Standards in process An International Standard is the result of an agreement between

ISO Update

Supplement to ISOFocus September 2014

ISO Update, Supplement to ISO Focus -- September 2014 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 August to 31 August 2014

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 20 Aircraft and space vehicles

ISO/CD TR 19473

Space systems — Best practices for orbit ele-ments at payload — LV separation

TC 22 Road vehicles

ISO/CD 15118-5

Road vehicles — Vehicle to grid communica-tion interface — Part 5: Physical layer and data link layer conformance test

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 8437-1 Snowthrowers — Safety requirements and test procedures — Part 1: Terminology and com-mon tests

TC 34 Food products

ISO/DTR 29263

Cereals and cereal products — Sampling studies

TC 44 Welding and allied processes

ISO/CD 5182 Resistance welding — Materials for electrodes and ancillary equipment

ISO/CD 10656 Electric resistance welding — Integrated trans-formers for welding guns

ISO/CD 22829 Resistance welding — Transformer-rectifier for welding guns with integrated transformers — Transformer-rectifier units operating at 1000 Hz frequency

TC 79 Light metals and their alloys

ISO/CD 16220 Magnesium and magnesium alloys — Magne-sium alloy ingots and castings

TC 83 Sports and other recreational facilities and equipment

ISO/CD 8936 Awnings for leisure accommodation vehicles — Requirements and test methods

ISO/CD 19202-1

Summer toboggan runs — Part 1: Safety requirements and test methods

ISO/CD 19202-2

Summer toboggan runs — Part 2: Safety requirements for operation

ISO/DTR 20183

Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO/CD 21940-12

Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour

TC 131 Fluid power systems

ISO/CD 18237 Hydraulic fluid dehydrators — Method for evaluating water separation performance

ISO/CD 23309 Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing

TC 147 Water quality

ISO/CD 13843 Water quality — Requirements for establish-ing performance characteristics of quantitative microbiological methods

TC 156 Corrosion of metals and alloys

ISO/CD 19280 Measurement of crevice corrosion temperature for cylindrical crevice geometries

TC 163 Thermal performance and energy use in the built environment

ISO/CD 52018-1

Energy performance of buildings — Building and building elements — Ways to Express Energy Performance and Energy Performance Requirements — Part 1: Expressions and Procedures

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO/CD 9599 Copper, lead and zinc sulfide concentrates — Determination of hygroscopic moisture in the analysis sample — Gravimetric method

TC 204 Intelligent transport systems

ISO/CD 16787 Intelligent Transport Systems — Assisted Park-ing System (APS) - Performance requirements and test procedures

TC 211 Geographic information/Geomatics

ISO/DTS 19159-2

Geographic information — Calibration and validation of remote sensing imagery sensors — Part 2: Lidar

ISO/DTS 19163

Geographic information — Content compo-nents and encoding rules for imagery and gridded data

TC 217 Cosmetics

ISO/DTR 18109

Survey of natural and/or organic cosmetic ingredient and productdefinitions

TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

ISO/CD 24516-3

Guidelines for management of assets of water supply and wastewater systems — Part 3: Wastewater collection networks

TC 260 Human resource management

ISO/CD 30405 Human resource management — Guidelines on recruitment

JTC 1 Information technology

2 ISO Update, Supplement to ISO Focus -- September 2014

ISO/IEC CD 29110-4-1

Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 4-1: Profile specifications: Generic profile group

ISO/IEC CD 33050-4

Information technology — Process assess-ment — Part 4: A process reference model for information security management

ISO/IEC CD 33070-4

Information technology — Process assessment — Part 4: A process assessment model for information security management

ISO/IEC PDTS 19568

C++ Extensions for Library Fundamentals

ISO/IEC PDTS 19570

C++ Extensions for Parallelism

ISO/IEC CD 18521-1

Mixed and Augmented Reality (MAR) concepts and reference model — Part 1: The reference model

ISO/IEC CD 18521-2

Mixed and Augmented Reality (MAR) con-cepts and reference model — Part 2: Physical sensors

ISO/IEC CD 18521-3

Mixed and Augmented Reality (MAR) concepts and reference model — Part 3: Real character representation

ISO/IEC 13818-1/PDAM 6

Information technology — Generic coding of moving pictures and associated audio infor-mation — Part 1: Systems — Amendment 6: Carriage of MPEG-H 3D audio over MPEG-2 Systems

ISO/IEC 14496-4:2004/PDAM 44

Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 44: Conformance testing for Video Coding for Browsers

ISO/IEC 14496-5:2001/PDAM 38

Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 38: Reference software for Video Coding for Browsers

ISO/IEC 14496-10:2014/PDAM 1

Information technology — Coding of audio-vis-ual objects — Part 10: Advanced Video Coding — Amendment 1: Multi-Resolution Frame Compatible Stereoscopic Video with Depth Maps, and Additional Supplemental Enhance-ment Information

ISO/IEC CD 23000-15

Information technology - Multimedia applica-tion format (MPEG-A) — Part 15: Multimedia preservation application format

ISO/IEC 23001-8:2013/PDAM 2

Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 2: Sample aspect ratio and additional transfer functions, colour primaries and matrix coefficients

ISO/IEC 23002-5:2013/PDAM 2

Information technology — MPEG video technologies — Part 5: Reconfigurable media coding conformance and reference software — Amendment 2: RMC Reference Software

ISO/IEC 19788-2:2011/PDAM 1

Information technology — Learning, education and training — Metadata for learning resources — Part 2: Dublin Core elements — Amend-ment 1

ISO/IEC CD 19784-1

Information technology — Biometric applica-tion programming interface — Part 1: BioAPI specification

ISO/IEC PDTR 30125

Biometrics — Biometrics used with mobile devices

ISO/IEC CD 30134-3

Information Technology — Data Centres — Key Performance Indicators — Part 3: Renewable Energy Factor (REF)

ISO/IEC CD 30105-4

IT Enabled Services / Business Process Outsourcing Lifecycle Processes ITESBPO Standard — Part 4: Terms and concepts

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

PC 248 Sustainability criteria for bioenergy

ISO/DIS 13065 * Sustainability criteria for bioenergy

2014-11-20

TC 8 Ships and marine technology

ISO/DIS 28007-1

* Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) — Part 1:

2014-11-20

(Revision of ISO/PAS 28007:2012)

ISO/DIS 5488 * Ships and marine technology — Accommodation ladders

2014-11-27

(Revision of ISO 5488:1979)

ISO/DIS 7061 * Ships and marine technology — Aluminium shore gangways for seagoing vessels

2014-11-27


ISO/DIS 7364 * Ships and marine tecnhology — Deck machinery — Accom-modation ladder winches

2014-11-14


TC 22 Road vehicles

ISO/DIS 17536-1

* Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General

2014-11-14

ISO/DIS 17449 * Road vehicles — Safety glazing materials — Test methods for properties of electrically heated glazing

2014-11-26

ISO 2575:2010/DAmd 5

* Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 5

2014-10-16

ISO/DIS 18580 * Motorcycles — Verification of total running resistance force during mode running on a chas-sis dynamometer

2014-11-13



ISO/DIS 18471 * Agricultural irrigation equipment — Filters — Verification of filtra-tion grade

2014-11-27

TC 36 Cinematography

ISO/DIS 2969 * Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifica-tions and measurements

2014-11-20


TC 37 Terminology and other language and content resources

ISO/DIS 16642 * Computer applications in termi-nology — Terminological markup framework

2014-11-27


TC 38 Textiles

ISO/DIS 105-G01

* Textiles — Tests for colour fast-ness — Part G01: Colour fast-ness to nitrogen oxides

2015-01-22

(Revision of ISO 105-G01:1993, ISO 105-G01:1993/Cor 1:1995)

TC 39 Machine tools

ISO/DIS 17543-1

* Machines tools — Test condi-tions for accessory spindle heads — Part 1: Horizontal spindle machines

2014-11-26

TC 45 Rubber and rubber products

ISO/DIS 6505 * Rubber, vulcanized or thermo-plastic — Determination of ten-dency to adhere to and corrode metals

2014-11-14


ISO/DIS 11344 * Rubber, raw synthetic — De-termination of the molecular-mass distribution of solution polymers by gel permeation chromatography

2014-11-05

(Revision of ISO 11344:2004, ISO 11344:2004/Cor 1:2008)

ISO/DIS 18517 * Rubber, vulcanized or thermo-plastic — Hardness testing — Introduction and guide

2014-11-05


ISO/DIS 4633 * Rubber seals — Joint rings for water supply, drainage and sew-erage pipelines — Specification for materials

2014-11-20


TC 61 Plastics

ISO/DIS 6721-10

* Plastics — Determination of dy-namic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

2014-11-17

(Revision of ISO 6721-10:1999)

ISO/DIS 17855-2

* Plastics — Polyethylene (PE) moulding and extrusion materi-als — Part 2: Preparation of test specimens and determination of properties

2015-01-29


TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/DIS 16711 * Seismic assessment and retrofit of concrete structures

2014-10-20

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use

ISO 13926-2:2011/DAmd 1

* Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1

2014-11-20

TC 83 Sports and other rec-reational facilities and equipment

ISO/DIS 20957-9

* Stationary training equipment — Part 9: Elliptical trainers, additional specific safety require-ments and test methods

2015-01-22


TC 94 Personal safety -- Pro-tective clothing and equipment

ISO 17491-4:2008/DAmd 1

* Protective clothing — Test meth-ods for clothing providing pro-tection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) — Amendment 1

2015-01-22

TC 108 Mechanical vibration, shock and condition monitoring

ISO 10816-6:1995/DAmd 1

* Mechanical vibration — Evalu-ation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1

2014-11-20

TC 122 Packaging

ISO/DIS 780 * Packaging — Distribution packaging — Graphical symbols for handling and storage of packages

2015-01-15


ISO/DIS 15394 * Packaging — Bar code and two-dimensional symbols for shipping, transport and receiving labels

2014-11-14


ISO/DIS 28219 * Packaging — Labelling and di-rect product marking with linear bar code and two-dimensional symbols

2014-11-14


TC 130 Graphic technology

ISO/DIS 2834-2

* Graphic technology — Laborato-ry preparation test prints — Part 2: Liquid printing inks

2014-11-13


ISO/DIS 17972-4

* Graphic technology — Colour data exchange format (CxF/X) — Part 4: Spot colour characterisa-tion data (CxF/X-4)

2014-11-12



ISO/DIS 1219-3

* Fluid power systems and com-ponents — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams

2014-11-20

ISO/DIS 6020-3

* Hydraulic fluid power — Mount-ing dimensions for single rod cyl-inders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm

2014-11-14


ISO/DIS 5781 * Hydraulic fluid power — Pres-sure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces

2014-11-27


ISO/DIS 7368 * Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities

2014-11-25


TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 18488 * Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method

2014-11-14

ISO/DIS 18489 * Polyethylene (PE) materials — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method

2014-11-14

TC 146 Air quality

ISO/DIS 19694-1

* Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-inten-sive industries — Part 1: General aspects

2015-01-22

ISO/DIS 19694-2

* Stationary source emissions — Greenhouse Gas (GHG) emissions in energy-intensive industries — Part 2: Iron and steel industry

2015-01-22

ISO/DIS 19694-3

* Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-inten-sive industries — Part 3: Cement industry

2015-01-22

ISO/DIS 19694-4

* Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 4: Aluminium industry

2015-01-22

ISO/DIS 19694-5

* Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 5: Lime industry

2015-01-22

ISO/DIS 19694-6

* Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 6: Ferroalloy industry

2015-01-22

TC 155 Nickel and nickel alloys

ISO/DIS 7530-1

* Nickel alloys — Flame atomic absorption spectrometric analy-sis — Part 1: Determination of cobalt, chromium, copper, iron and manganese

2014-11-17

(Revision of ISO 7530-1:1990, ISO 7530-2:1990, ISO 7530-3:1990, ISO 7530-4:1990, ISO 7530-5:1990, ISO 7530-6:1990)

TC 159 Ergonomics

ISO/DIS 6385 * Ergonomic principles in the design of work systems

2015-01-15


TC 172 Optics and photonics

ISO/DIS 17123-8

* Optics and optical instruments — Field procedures for testing geodetic and surveying instru-ments — Part 8: GNSS field measurement systems in real-time kinematic (RTK)

2014-11-14


ISO/DIS 19045 * Ophthalmic optics — Contact lens care products — Method for evaluating Acanthamoeba encystment by contact lens care products

2014-11-06

TC 173 Assistive products for per-sons with disability

ISO/DIS 17966 * Assistive products for personal hygiene that support users --Requirements and test methods

2014-11-13

TC 185 Safety devices for protec-tion against excessive pressure

ISO/DIS 4126-11

* Safety devices for protection against excessive pressure — Part 11: Performance testing

2015-01-08

TC 188 Small craft

ISO/DIS 16315.3

* Small craft — Electric propulsion system

2014-10-15

TC 189 Ceramic tile

ISO/DIS 14448 * Low modulus adhesives for exte-rior tile finishing

2014-11-14

TC 190 Soil quality

ISO/DIS 18187 * Soil quality — Quality of solid samples — Solid contact test using the dehydrogenase activity of Arthrobacter globiformis

2014-11-13

ISO/DIS 18311 * Soil quality — Method for testing effects of soil contaminants on the feeding activity of soil dwell-ing organisms — Bait-lamina test

2014-11-06

TC 195 Building construction ma-chinery and equipment

ISO/DIS 17740-1

* Building construction machinery and equipment — Concrete placing systems for station-ary equipment — Part 1: Terminology and commercial specifications

2014-11-13

TC 206 Fine ceramics

ISO/DIS 17859 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Measurement method of piezoelectric strain at high electric field

2014-11-28


TC 207 Environmental management

ISO/DIS 14001 * Environmental management systems — Requirements with guidance for use

2014-11-29

(Revision of ISO 14001:2004, ISO 14001:2004/Cor 1:2009)

TC 211 Geographic information/Geomatics

ISO/DIS 19162 * Geographic information — Well known text representation of coordinate reference systems

2014-11-19

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/DIS 10360-12

* Geometrical Product Specifica-tions (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 12: Articulated arm coor-dinate measurement machines (CMM)

2015-01-22

TC 215 Health informatics

ISO/DIS 21298 * Health informatics — Functional and structural roles

2014-11-27

(Revision of ISO/TS 21298:2008)

ISO/DIS 21549-7

* Health informatics — Patient healthcard data — Part 7: Medi-cation data

2015-01-15


TC 221 Geosynthetics

ISO/DIS 18325 * Geosynthetics — Test method for the determination of water discharge capacity for prefabri-cated vertical drains

2014-11-13

CASCO Committee on conformity assessment

ISO/IEC DIS 17021-1.2

* Conformity assessment — Re-quirements for bodies provid-ing audit and certification of management systems — Part 1: Requirements

2014-11-08

(Revision of ISO/IEC 17021:2011)


ISO/IEC DIS 19987

* Information technology — EPC Information services — Specification

2014-11-26

ISO/IEC DIS 19988

* Information technology — GS1 Core business vocabulary (CBV)

2014-11-26

ISO/IEC DIS 27033-1

* Information technology — Se-curity techniques — Network security — Part 1: Overview and concepts

2014-11-20

(Revision of ISO/IEC 27033-1:2009)

ISO/IEC DIS 27034-2

* Information technology — Se-curity techniques — Application security — Part 2: Organization normative framework

2014-11-19

ISO/IEC DIS 18046-4

* Information technology — Radio frequency identification device performance test methods — Part 4: Test methods for perfor-mance of RFID gates in libraries

2014-11-26

ISO/IEC DIS 24770-62

* Information technology — Real-time locating system (RTLS) device performance test methods — Test methods for air interface communication at 2,4 GHz — Part 62: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface

2014-11-26


* Information technology — Au-tomatic identification and data capture techniques — Part 14: Crypto suite AES OFB secu-rity services for air interface communications

2014-11-19


* Information technology — Busi-ness Operational View — Part 20: Linking business operational view to functional service view

2014-11-06

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

IIW International Institute of Welding

ISO/FDIS 10447

* Resistance welding — Peel and chisel testing of resistance spot and projection welds

2014-10-29


ISO/FDIS 14323

* Resistance welding — Destruc-tive testing of welds — Speci-men dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds

2014-10-29


TC 6 Paper, board and pulps

ISO/FDIS 8784-1

* Pulp, paper and board — Micro-biological examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration

2014-10-06


TC 10 Technical product documentation

ISO/FDIS 17599

* Technical product documenta-tion (TPD) — General require-ments of digital mock-up for mechanical products

2014-10-22



ISO/FDIS 16694

* Space systems — The meas-ured parameters at firing bench and flight tests of liquid rocket engines

2014-10-16

TC 21 Equipment for fire protec-tion and fire fighting

ISO/FDIS 6182-12

* Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end components for steel pipe systems

2014-10-14


TC 22 Road vehicles

ISO/FDIS 16844-4

* Road vehicles — Tachograph systems — Part 4: CAN interface

2014-10-13


ISO/FDIS 16844-6

* Road vehicles — Tachograph systems — Part 6: Diagnostics

2014-10-14


ISO/FDIS 16844-7

* Road vehicles — Tachograph systems — Part 7: Parameters

2014-10-14



ISO/FDIS 24631-5

* Radio frequency identification of animals — Part 5: Procedure for testing the capability of non-synchronized RFID transceivers of reading ISO 11784 and ISO 11785 transponders

2014-10-14

TC 29 Small tools

ISO/FDIS 12164-4

* Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools

2014-10-12


TC 30 Measurement of fluid flow in closed conduits

ISO/FDIS 10790

* Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)

2014-10-13

(Revision of ISO 10790:1999, ISO 10790:1999/Amd 1:2003)

TC 38 Textiles

ISO/FDIS 17617

* Textiles — Determination of moisture drying rate

2014-10-12

TC 41 Pulleys and belts (including veebelts)

ISO/FDIS 13050

* Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys

2014-10-07



ISO/FDIS 23277

* Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels

2014-10-29


ISO 5175:1987/FDAmd 1

* Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen or compressed air — General specifications, require-ments and tests — Amendment 1

2014-10-14

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 12736

* Petroleum and natural gas industries — Wet thermal insula-tion coatings for pipelines, flow lines, equipment and subsea structures

2014-10-08

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use

ISO/FDIS 11418-5

* Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies

2014-10-27


TC 106 Dentistry

ISO/FDIS 9687 * Dentistry — Graphical symbols for dental equipment

2014-10-29


TC 110 Industrial trucks

ISO/FDIS 22915-12

* Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer

2014-10-20

TC 118 Compressors and pneu-matic tools, machines and equipment

ISO/FDIS 10439-1

* Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 1: General requirements

2014-10-08


ISO/FDIS 10439-3

* Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 3: Integrally geared centrifugal compressors

2014-10-08


ISO/FDIS 10439-4

* Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 4: Expander-compressors

2014-10-29



ISO/FDIS 6953-1

* Pneumatic fluid power — Com-pressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from sup-pliers and product-marking requirements

2014-10-26

(Revision of ISO 6953-1:2000, ISO 6953-1:2000/Cor 1:2006)


ISO/FDIS 6953-2

* Pneumatic fluid power — Com-pressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers

2014-10-12



ISO/FDIS 3458 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure

2014-10-15


ISO/FDIS 3459 * Plastic piping systems — Me-chanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

2014-10-22


ISO/FDIS 3503 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending

2014-10-08


ISO/FDIS 6259-1

* Thermoplastics pipes — Deter-mination of tensile properties — Part 1: General test method

2014-10-29


ISO/FDIS 13951.2

Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fit-ting assemblies to tensile loading

2014-10-23


ISO/FDIS 17778

* Plastics piping systems — Fit-tings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships

2014-10-15

TC 142 Cleaning equipment for air and other gases

ISO/FDIS 15957

* Test dusts for evaluating air cleaning equipment

2014-10-29

TC 150 Implants for surgery

ISO/FDIS 13779-6

* Implants for surgery — Hy-droxyapatite — Part 6: Powders

2014-10-26

TC 156 Corrosion of metals and alloys

ISO/FDIS 7441 * Corrosion of metals and alloys — Determination of bimetallic cor-rosion in atmospheric exposure corrosion tests

2014-10-15


TC 158 Analysis of gases

ISO/FDIS 6141 * Gas analysis — Contents of certificates for calibration gas mixtures

2014-10-08


TC 171 Document management applications

ISO/FDIS 12651-2

* Electronic document manage-ment — Vocabulary — Part 2: Workflow management

2014-10-16



ISO/FDIS 9022-2

* Optics and photonics — Envi-ronmental test methods — Part 2: Cold, heat and humidity

2014-10-19


ISO/FDIS 9022-20

* Optics and photonics — Envi-ronmental test methods — Part 20: Humid atmosphere contain-ing sulfur dioxide or hydrogen sulfide

2014-10-05


TC 178 Lifts, escalators and mov-ing walks

ISO/FDIS 25745-2

* Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)

2014-10-22

ISO/FDIS 25745-3

* Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and classification of escalators and moving walks

2014-10-22

TC 192 Gas turbines

ISO/FDIS 19372

* Microturbines applications — Safety

2014-10-07

TC 238 Solid biofuels

ISO/FDIS 16993

* Solid biofuels — Conversion of analytical results from one basis to another

2014-10-29

ISO/FDIS 16994

* Solid biofuels — Determination of total content of sulfur and chlorine

2014-10-29

ISO/FDIS 16995

* Solid biofuels — Determination of the water soluble chloride, sodium and potassium content

2014-10-29

TC 242 Energy Management

ISO/FDIS 50015

* Energy management systems — Measurement and verification of energy performance of organiza-tions — General principles and guidance

2014-10-26


ISO/IEC 15444-1:2004/FDAmd 8

* Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 8: Profiles for an interoperable master format IMF

2014-10-13

ISO/IEC 23002-4:2014/FDAmd 1

* Information technology — MPEG video technologies — Part 4: Video tool library — Amendment 1: Graphics tool library (GTL) for the reconfigurable multimedia coding (RMC) framework

2014-10-05

ISO/IEC 23003-2:2010/FDAmd 3

* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 3: Dialog enhancement

2014-10-21


ISO/IEC FDIS 15459-2

* Information technology — Au-tomatic identification and data capture techniques — Unique identification — Part 2: Registra-tion procedures

2014-10-16

(Revision of ISO/IEC 15459-2:2006)

Standards published

New International Standards published between 01 August and 31 August 2014


** French version of standard previously published in English only

Price

group

IIW International Institute of Welding

ISO/TR 13392:2014

* Health and safety in welding and al-lied processes — Arc welding fume components

A

PC 245 Cross-border trade of second-hand goods

ISO/TS 20245:2014

Cross-border trade of second-hand goods

B

TC 4 Rolling bearings

ISO 3290-1:2014

* Rolling bearings — Balls — Part 1: Steel balls

C

ISO 3290-2:2014

* Rolling bearings — Balls — Part 2: Ceramic balls

C

TC 6 Paper, board and pulps

ISO 2758:2014 Paper — Determination of bursting strength

B

ISO 5630-7:2014

* Paper and board — Accelerated age-ing — Part 7: Exposure to light

A


ISO 21100:2014

* Air cargo unit load devices — Per-formance requirements and test parameters

F

TC 21 Equipment for fire protection and fire fighting

ISO 7240-28:2014

* Fire detection and alarm systems — Part 28: Fire protection control equipment

E

TC 22 Road vehicles

ISO/TS 18571:2014

* Road vehicles — Objective rating metric for non-ambiguous signals

G

ISO/TS 15007-2:2014

* Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures

C

TC 29 Small tools

ISO 26623-1:2014

* Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

B

ISO 26623-2:2014

* Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers

A

ISO 5610-1:2014

Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions

C

ISO 5610-2:2014

Tool holders with rectangular shank for indexable inserts — Part 2: Style A

B

ISO 5610-3:2014

Tool holders with rectangular shank for indexable inserts — Part 3: Style B

B

ISO 5610-4:2014

Tool holders with rectangular shank for indexable inserts — Part 4: Style D

B

ISO 5610-5:2014

Tool holders with rectangular shank for indexable inserts — Part 5: Style F

B

ISO 5610-6:2014

Tool holders with rectangular shank for indexable inserts — Part 6: Style G

B

ISO 5610-7:2014

Tool holders with rectangular shank for indexable inserts — Part 7: Style J

B

ISO 5610-8:2014

Tool holders with rectangular shank for indexable inserts — Part 8: Style K

B

ISO 5610-9:2014

Tool holders with rectangular shank for indexable inserts — Part 9: Style L

B

ISO 5610-10:2014

Tool holders with rectangular shank for indexable inserts — Part 10: Style N

B

ISO 5610-11:2014

Tool holders with rectangular shank for indexable inserts — Part 11: Style R

B

ISO 5610-12:2014

Tool holders with rectangular shank for indexable inserts — Part 12: Style S

C

ISO 5610-13:2014

Tool holders with rectangular shank for indexable inserts — Part 13: Style T

A


ISO 5610-14:2014

Tool holders with rectangular shank for indexable inserts — Part 14: Style H

B

ISO 5610-15:2014

Tool holders with rectangular shank for indexable inserts — Part 15: Style V

A

TC 30 Measurement of fluid flow in closed conduits

ISO 4064-1:2014

Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements

F

ISO 4064-2:2014

Water meters for cold potable water and hot water — Part 2: Test methods

H

ISO 4064-3:2014

Water meters for cold potable water and hot water — Part 3: Test report format

G

ISO 4064-4:2014

Water meters for cold potable water and hot water — Part 4: Non-metrolog-ical requirements not covered in ISO 4064-1

D

ISO 4064-5:2014

Water meters for cold potable water and hot water — Part 5: Installation requirements

B

TC 31 Tyres, rims and valves

ISO 4250-1:2014

Earth-mover tyres and rims — Part 1: Tyre designation and dimensions

D

ISO 4250-2:2014

Earth-mover tyres and rims — Part 2: Loads and inflation pressures

D

ISO 5775-1:2014

Bicycle tyres and rims — Part 1: Tyre designations and dimensions

D

TC 33 Refractories

ISO 10081-4:2014

Classification of dense shaped refractory products — Part 4: Special products

B

TC 34 Food products

ISO 15163:2012

* Milk and milk products — Calf rennet and adult bovine rennet — Determina-tion by chromatography of chymosin and bovine pepsin contents

D

ISO/TS 17758:2014

Instant dried milk — Determination of the dispersibility and wettability

B

ISO/TR 6579-3:2014

Microbiology of the food chain — Hori-zontal method for the detection, enu-meration and serotyping of Salmonella — Part 3: Guidelines for serotyping of Salmonella spp.

E

ISO/TS 17383:2014

* Determination of the triacylglyc-erol composition of fats and oils — Determination by capillary gas chromatography

C

ISO 18301:2014

* Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) — Oscil-lating U-tube method

B

ISO 22004:2014

Food safety management systems — Guidance on the application of ISO 22000

E

TC 38 Textiles

ISO 11092:2014

Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

C

ISO 18184:2014

Textiles — Determination of antiviral activity of textile products

F

ISO 105-B01:2014

Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight

C

ISO 105-B02:2014

Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

F

TC 43 Acoustics

ISO 12913-1:2014

Acoustics — Soundscape — Part 1: Definition and conceptual framework

A


ISO 9453:2014 Soft solder alloys — Chemical compo-sitions and forms

C


ISO 3994:2014 Plastics hoses — Helical-thermoplas-tic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification

C

ISO 8029:2014 Plastics hose — General-purpose col-lapsible water hose, textile-reinforced — Specification

C

ISO 8330:2014 * Rubber and plastics hoses and hose assemblies — Vocabulary

A

ISO 815-1:2014

* Rubber, vulcanized or thermoplas-tic — Determination of compression set — Part 1: At ambient or elevated temperatures

C

ISO 6101-3:2014

Rubber — Determination of metal con-tent by atomic absorption spectrom-etry — Part 3: Determination of copper content

B

ISO 6101-4:2014

Rubber — Determination of metal content by atomic absorption spec-trometry — Part 4: Determination of manganese content

B

ISO 18766:2014

Rubber, vulcanized or thermoplastic — Low temperature testing — General introduction and guide

A

ISO 249:2014 Rubber, raw natural — Determination of dirt content

B

TC 46 Information and documentation

ISO 28560-1:2014

* Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation

E


ISO 28560-2:2014

* Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962

F

ISO 28560-3:2014

* Information and documentation — RFID in libraries — Part 3: Fixed length encoding

D

TC 54 Essential oils

ISO 16385:2014

Essential oil of molle (Schinus areira L.), Argentinean type

B

TC 58 Gas cylinders

ISO 11119-2:2012/Amd 1:2014

* Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced com-posite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1

XZ

TC 59 Buildings and civil engineering works

ISO/TR 15686-11:2014

* Buildings and constructed assets — Service life planning — Part 11: Terminology

E

TC 60 Gears

ISO/TR 15144-1:2014

* Calculation of micropitting load ca-pacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles

E

TC 61 Plastics

ISO 1887:2014 * Textile glass — Determination of combustible-matter content

A

ISO 10122:2014

* Reinforcement materials — Tubu-lar braided sleeves — Basis for a specification

B

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO/TS 16530-2:2014

* Well integrity — Part 2: Well integrity for the operational phase

H

TC 84 Devices for administration of medicinal products and catheters

ISO/TR 19244:2014

* Guidance on transition periods for standards developed by ISO/TC 84 — Devices for administration of medicinal products and catheters

A

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 16424:2012

Nuclear energy — Evaluation of homo-geneity of Gd distribution within gado-linium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements

C

TC 92 Fire safety

ISO 14934-4:2014

* Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests

D

ISO/TR 12468-3:2014

* External exposure of roofs to fire — Part 3: Commentary

B

TC 94 Personal safety -- Protective clothing and equipment

ISO 12311:2013

Personal protective equipment — Test methods for sunglasses and related eyewear

H

TC 96 Cranes

ISO 12482:2014

* Cranes — Monitoring for crane design working period

C

ISO 16715:2014

* Cranes — Hand signals used with cranes

B

TC 106 Dentistry

ISO 15841:2014

Dentistry — Wires for use in orthodontics

B

TC 108 Mechanical vibration, shock and condition monitoring

ISO 20283-4:2012/Amd 1:2014

Mechanical vibration — Measurement of vibration on ships — Part 4: Meas-urement and evaluation of vibration of the ship propulsion machinery — Amendment 1

XZ

TC 119 Powder metallurgy

ISO 4490:2014 Metallic powders — Determination of flow rate by means of a calibrated fun-nel (Hall flowmeter)

A


ISO 10766:2014

Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods

B

TC 145 Graphical symbols

ISO 3864-3:2012

* Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs

E

TC 146 Air quality

ISO 22262-2:2014

Air quality — Bulk materials — Part 2: Quantitative determination of asbes-tos by gravimetric and microscopical methods

F

ISO 16000-30:2014

Indoor air — Part 30: Sensory testing of indoor air

E


ISO 14708-1:2014

* Implants for surgery — Active implant-able medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer

G

TC 157 Non-systemic contraceptives and STI barrier prophylactics


ISO 4074:2014 Natural rubber latex male condoms — Requirements and test methods

G

TC 159 Ergonomics

ISO 24504:2014

* Ergonomics — Accessible design — Sound pressure levels of spoken an-nouncements for products and public address systems

D

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO 23551-6:2014

* Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 6: Ther-moelectric flame supervision controls

C


ISO 10109:2014

* Optics and photonics — Guidance for the selection of environmental tests

C

ISO 15362:2014

* Stereomicroscopes — Information provided to the user

A

ISO 17123-1:2014

* Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory

F

ISO 11979-2:2014

Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods

D

ISO 11979-7:2014

Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations

F

ISO 11979-9:2006/Amd 1:2014

Ophthalmic implants — Intraocular lenses — Part 9: Multifocal intraocular lenses — Amendment 1

XZ

ISO 13212:2014

Ophthalmic optics — Contact lens care products — Guidelines for deter-mination of shelf-life

B

TC 178 Lifts, escalators and moving walks

ISO/TS 18870:2014

* Lifts (elevators) — Requirements for lifts used to assist in building evacuation

D

TC 181 Safety of toys

ISO 8124-2:2014

* Safety of toys — Part 2: Flammability

D

ISO 8124-6:2014

* Safety of toys — Part 6: Certain phthalate esters in toys and children's products

E

ISO/TR 8124-8:2014

* Safety of toys — Part 8: Age determi-nation guidelines

E

TC 188 Small craft

ISO 6185-3:2014

Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater

E

TC 189 Ceramic tile

ISO 10545-4:2014

Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength

A

TC 194 Biological and clinical evaluation of medical devices

ISO/TR 37137:2014

Cardiovascular biological evaluation of medical devices — Guidance for absorbable implants

C

TC 195 Building construction machinery and equipment

ISO 21573-1:2014

* Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications

D

TC 201 Surface chemical analysis

ISO 13095:2014

* Surface Chemical Analysis — Atomic force microscopy — Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement

D


ISO 17947:2014

* Fine ceramics (advanced ceramics, advanced technical ceramics) — Meth-ods for chemical analysis of fine silicon nitride powders

E

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO 15189:2012

Medical laboratories — Requirements for quality and competence

G

TC 213 Dimensional and geometrical product specifications and verification

ISO 2538-1:2014

Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes

B

ISO 2538-2:2014

Geometrical product specifications (GPS) — Wedges — Part 2: Dimen-sioning and tolerancing

B

TC 215 Health informatics

ISO/HL7 21731:2014

* Health informatics — HL7 version 3 — Reference information model — Release 4

F

TC 244 Industrial furnaces and associ-ated processing equipment

ISO 13577-4:2014

* Industrial furnace and associated pro-cessing equipment — Safety — Part 4: Protective systems

G

TC 254 Safety of amusement rides and amusement devices

ISO/TS 17929:2014

* Biomechanical effects on amusement ride passengers

D

TC 261 Additive manufacturing

ISO 17296-3:2014

* Additive manufacturing — General principles — Part 3: Main characteris-tics and corresponding test methods

C


ISO 17296-4:2014

* Additive manufacturing — General principles — Part 4: Overview of data processing

B

CASCO Committee on conformity assessment

ISO/IEC 17020:2012

* Conformity assessment — Require-ments for the operation of various types of bodies performing inspection

C


ISO/IEC 10646:2014

* Information technology — Universal Coded Character Set (UCS)

H

ISO/IEC 9834-8:2014

* Information technology — Procedures for the operation of object identi-fier registration authorities — Part 8: Generation of universally unique identi-fiers (UUIDs) and their use in object identifiers

D

ISO/IEC 13157-1:2014

* Information technology — Telecom-munications and information exchange between systems — NFC Security — Part 1: NFC-SEC NFCIP-1 security services and protocol

C

ISO/IEC 19369:2014

* Information technology — Telecom-munications and information exchange between systems — NFCIP-2 test methods

A

ISO/IEC 24771:2014

* Information technology — Telecom-munications and information exchange between systems — MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment

H

ISO/IEC TR 29110-5-6-2:2014

* Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-6-2: Systems engineering — Management and en-gineering guide: Generic profile group: Basic profile

G

ISO/IEC 7811-1:2014

* Identification cards — Recording tech-nique — Part 1: Embossing

D

ISO/IEC 7811-2:2014

* Identification cards — Recording tech-nique — Part 2: Magnetic stripe — Low coercivity

D

ISO/IEC 7811-6:2014

* Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity

D

ISO/IEC 7811-7:2014

* Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity, high density

D

ISO/IEC 7816-4:2013/Cor 1:2014

* Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange — Technical Corrigendum 1

free

ISO/IEC 8484:2014

* Information technology — Magnetic stripes on savingsbooks

C

ISO/IEC 24764:2010/Amd 1:2014

* Information technology — Generic cabling systems for data centres — Amendment 1

XZ

ISO/IEC 14496-10:2014

* Information technology — Coding of audio-visual objects — Part 10: Ad-vanced Video Coding

H

ISO/IEC 23000-10:2012/Amd 1:2014

* Information technology — Multimedia application format (MPEG-A) — Part 10: Surveillance application format — Amendment 1: Conformance and reference software

XZ

ISO/IEC 23003-2:2010/Cor 2:2014

* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Technical Corrigendum 2

free

ISO/IEC 29167-1:2014

* Information technology — Automatic identification and data capture tech-niques — Part 1: Security services for RFID air interfaces

B

ISO/IEC 26300:2006/Amd 1:2012/Cor 1:2014

* Information technology — Open Docu-ment Format for Office Applications (OpenDocument) v1.0 — Amendment 1: Open Document Format for Office Applications (OpenDocument) v1.1 — Technical Corrigendum 1

free

ISO/IEC 26300:2006/Cor 3:2014

* Information technology — Open Docu-ment Format for Office Applications (OpenDocument) v1.0 — Technical Corrigendum 3

free

ISO/IEC 19788-1:2011/Amd 1:2014

* Information technology — Learning, education and training — Metadata for learning resources — Part 1: Frame-work — Amendment 1

XZ

ISO/IEC 19794-2:2005/Amd 1:2010/Cor 2:2014

* Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 1: Detailed description of finger minutiae location, direction, and type — Techni-cal Corrigendum 2

free

Standards confirmed

The following International Standards are confimred for a five year period:

TC 10 Technical product documentation

ISO/TS 128-71:2010


ISO 1965:1973 (reconfirmed)

ISO 8668-4:1993 (reconfirmed)









ISO 22009:2009


ISO 24637:2009


ISO 26870:2009

TC 22 Road vehicles




TC 33 Refractories


















TC 34 Food products

ISO 7971-1:2009




ISO 24557:2009

TC 43 Acoustics


TC 46 Information and documentation

ISO 21047:2009

TC 70 Internal combustion engines




















TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO 1920-8:2009

TC 72 Textile machinery and accessories

ISO 96-1:2009

ISO 96-2:2009

TC 92 Fire safety

ISO/TR 9705-2:2001

ISO/TR 11696-1:1999

ISO 12863:2010

ISO/TR 17252:2008

TC 96 Cranes


TC 102 Iron ore and direct reduced iron











TC 106 Dentistry





ISO/TR 16913:1999

(reconfirmed)

ISO 24033:2009

TC 159 Ergonomics

ISO/TS 14505-1:2007

(reconfirmed)

TC 163 Thermal performance and energy use in the built environment


TC 183 Copper, lead, zinc and nickel ores and concentrates





TC 184 Automation systems and integration







ISO 16100-5:2009



ISO/IEC 21827:2008


Standards withdrawn



ISO 17399:2003 (replaced by )

TC 22 Road vehicles

ISO 13555-1:2003 (replaced by )


ISO/TS 12104:2003

(replaced by )

TC 34 Food products

ISO/TS 22004:2005

(replaced by ISO 22004:2014)

TC 68 Financial services




TC 79 Light metals and their alloys


TC 86 Refrigeration and air-conditioning


TC 92 Fire safety

ISO/TS 14934-4:2007

(replaced by ISO 14934-4:2014)

TC 96 Cranes

ISO 12482-1:1995 (replaced by ISO 12482:2014)

TC 119 Powder metallurgy







ISO 10109-11:2001


ISO 10109-12:2004




TC 213 Dimensional and geometrical product specifications and verification

ISO 2538:1998 (replaced by ISO 2538-1:2014, ISO 2538-2:2014)

TMBG Technical Management Board - groups


Meeting calendar

(update at 01 August 2014)

Meetings called for the month of July are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

September 2014

1-2 Sydney (Australia)

* TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

1-3 Lisbon (Portugal) PC 288 Educational organiza-tions management systems - Require-ments with guidance for use

1-3 Prague (Czech Republic)


1-5 Berlin (Germany) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock

2-3 Reading (United Kingdom)


2-4 Research Trian-gle Park (USA)

TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

3 Sydney (Australia)

TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

3 London (United Kingdom)

TC 28/SC 2 Petroleum products and lubricants/Meas-urement of petroleum and related products

3 Berlin (Germany) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy

3-4 Washington, D.C (USA)

TC 8/SC 3 Ships and marine technology/Piping and machinery


TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers

3-5 Berlin (Germany) TC 202 Microbeam analysis

3-5 Berlin (Germany) TC 202/SC 1 Microbeam analysis/Terminology

3-5 Berlin (Germany) TC 202/SC 2 Microbeam analy-sis/Electron probe microanalysis


3-5 Berlin (Germany) TC 202/SC 3 Microbeam analysis/Analytical electron microscopy

3-5 Berlin (Germany) TC 202/SC 4 Microbeam analysis/Scanning electron microscopy (SEM)

3-6 Berlin (Germany) TC 201 Surface chemical analysis

4 Sydney (Australia)

TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems

4 Berlin (Germany) TC 201/SC 1 Surface chemical analysis/Terminology

4 Berlin (Germany) TC 201/SC 2 Surface chemical analysis/General procedures

4-5 Istanbul (Turkey) TC 262 Risk management

5 Berlin (Germany) TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment

5 Berlin (Germany) TC 201/SC 4 Surface chemi-cal analysis/Depth profiling

5 Berlin (Germany) TC 201/SC 7 Surface chemical analysis/Electron spectroscopies

6 Berlin (Germany) TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy

7 Rio de Janeiro (Brazil)

President's committee



COUNCIL Council

8-9 Madrid (Spain) JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

8-9 Rio de Janeiro (Brazil)

TMB Technical Manage-ment Board

8-10 Berlin (Germany) TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water

8-12 Paris (France) TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

8-12 Kyoto (Japan) TC 258 Project, programme and portfolio management

8-12 Toronto (Canada) TC 275 Sludge recovery, recycling, treatment and disposal


DEVCO Committee on devel-oping country matters

9 Estes Park (USA) JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage

10-12 Rio de Janeiro (Brazil)

GA General Assembly


CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

11 Virtual (Unknown)

TC 22/SC 19 Road vehicles/Wheels

12 Stockholm (Sweden)

TC 210 Quality management and corresponding general aspects for medical devices

14-18 Milan (Italy) TC 43 Acoustics

14-20 Berlin (Germany) TC 106 Dentistry

15-18 Beijing (China) JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment

15-19 Copenhagen (Denmark)

TC 34/SC 17 Food products/Man-agement systems for food safety

15-19 Seoul (Korea, Republic of)


15-19 Wuxi (China) TC 163 Thermal performance and energy use in the built environment

15-19 Wuxi (China) TC 205 Building environment design

16-19 Miami (USA) PC 278 Anti-bribery manage-ment systems

16-19 Tokyo (Japan) TC 157 Non-systemic con-traceptives and STI barrier prophylactics


JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance


TC 131/SC 5 Fluid power systems/Control products and components

17-18 Bangkok (Thailand)

TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

18 Berlin (Germany) TC 106/SC 3 Dentistry/Terminology

18-19 Manches-ter (United Kingdom)

TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

18-19 Tokyo (Japan) TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

18-22 Huainan city (China)

TC 263 Coalbed methane (CBM)

19 Berlin (Germany) TC 106/SC 1 Dentistry/Filling and restorative materials

19 Paris (France) TC 213 Dimensional and geometrical product specifications and verification

20 Manches-ter (United Kingdom)

TC 281 Fine Bubble Technology

22 Berlin (Germany) TC 172 Optics and photonics

22-23 Stockholm (Sweden)

TC 17/SC 11 Steel/Steel castings


TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete



* TC 173/SC 6 Assistive products for persons with disabil-ity/Hoists for transfer of persons

22-26 Kyoto (Japan) JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

22-26 Honolulu, Hawaii (USA)

TC 61 Plastics


TC 61/SC 10 Plastics/Cellular plastics

22-26 Pretoria (South Africa)

TC 146 Air quality


TC 146/SC 1 Air quality/Stationary source emissions


TC 146/SC 2 Air quality/Workplace atmospheres


TC 146/SC 3 Air quality/Ambient atmospheres


TC 146/SC 6 Air quality/Indoor air

22-26 Tokyo (Japan) TC 165 Timber structures


TC 61/SC 9 Plastics/Thermoplas-tic materials

23-25 Berlin (Germany) TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

23-25 Montreux (Switzerland)

TC 256 Pigments, dyestuffs and extenders

23-26 Madrid (Spain) TC 37/SC 4 Terminology and other language and content resources/Language resource management

24 Honolulu, Hawaii (USA)

TC 61/SC 1 Plastics/Terminology

24 Hawaii (USA) TC 61/SC 2 Plastics/Mechanical properties


TC 61/SC 5 Plastics/Physical-chemical properties


TC 61/SC 12 Plastics/Thermoset-ting materials

24 Milan (Italy) TC 110/SC 1 Industrial trucks/Gen-eral terminology

24 Delft (Netherlands)

TC 254 Safety of amusement rides and amusement devices

24-25 Geneva (Switzerland)

CASCO Committee on con-formity assessment


TC 82/SC 7 Mining/Mine reclama-tion management

24-26 Cracow (Poland) TC 46/SC 10 Information and documentation/Requirements for document storage and conditions for preservation


TC 61/SC 13 Plastics/Composites and reinforcement fibres

25 Chicago (USA) TC 79/SC 11 Light metals and their alloys/Titanium

25 Milan (Italy) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks


TC 142 Cleaning equipment for air and other gases

25 Pretoria (South Africa)

TC 146/SC 4 Air quality/General aspects


TC 17 Steel


TC 82 Mining

25-26 Beijing (China) TC 289 Brand evaluation

26 Cleveland (USA) TC 22/SC 25 Road vehicles/Vehi-cles using gaseous fuels

26 Beijing (China) TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection

30 Fortaleza (Brazil) TC 28/SC 5 Petroleum products and lubricants/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels

September-November 2014

4-4 Beijing (China) TC 83 Sports and other recreational facilities and equipment

September-October 2014

22-3 Salamanca (Spain)

JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification

29-2 Berlin (Germany) PC 272 Forensic sciences

29-3 Bad Kohlgrub (Germany)

TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

29-3 Paris (France) TC 218 Timber

30-1 London (United Kingdom)

PC 286 Collaborative business relation-ship management -- Framework

30-3 Fortaleza (Brazil) TC 28 Petroleum products and lubricants

3rd Quarter 2014

London (United Kingdom)

** TC 48 Laboratory equipment

October 2014

1 Fortaleza (Brazil) TC 28/SC 4 Petroleum prod-ucts and lubricants/Classifications and specifications

1 Fortaleza (Brazil) TC 28/SC 7 Petroleum products and lubricants/Liquid Biofuels

1 Milan (Italy) TC 39/SC 4 Machine tools/Wood-working machines

3 Colombo (Sri Lanka)

JTC 1/SC 2 Information technol-ogy/Coded character sets

3 Paris (France) TC 86/SC 1 Refrigeration and air-conditioning/Safety and environmental requirements for re-frigerating systems


3 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refriger-ants and refrigeration lubricants

6 Seattle (USA) JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques

6-8 Bremen (Germany)


6-10 Sao Paulo (Brazil)

JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

6-10 Berlin (Germany) TC 215 Health informatics


TC 135 Non-destructive testing

7-9 Vienna (Austria) TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications

8 Virtual (Unknown)



8 Hamburg (Germany)

TC 8/SC 7 Ships and marine technology/Inland navigation vessels

8 San Antonio (USA)


8-9 San Antonio (USA)

TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement


TC 25 Cast irons and pig irons

9 Beijing (China) TC 180/SC 1 Solar energy/Climate - Measurement and data

9-10 Bremen (Germany)

TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems

10 Tokyo (Japan) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

10 Copenhagen (Denmark)

TC 34/SC 18 Food products/Cocoa

10 Paris (France) TC 92/SC 1 Fire safety/Fire initia-tion and growth

10 Beijing (China) TC 180 Solar energy

13-15 Miami (USA) TC 44/SC 3 Welding and allied processes/Welding consumables

13-15 Antigua (Guatemala)

TC 285 Clean cookstoves and clean cooking solutions

13-16 Tromsø (Norway) TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations



13-17 Kuala Lumpur (Malaysia)

TC 181 Safety of toys

14-16 Suzhou (China) TC 164/SC 5 Mechanical testing of metals/Fatigue testing

14-17 Buenos Aires (Argentina)

TC 279 Innovation management

15 Suzhou (China) TC 164/SC 1 Mechanical testing of metals/Uniaxial testing

15 Suzhou (China) TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

15-16 Pirmasens (Germany)

TC 137 Footwear sizing des-ignations and marking systems

15-17 Toronto (Canada) TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

16 Suzhou (China) TC 164/SC 3 Mechanical testing of metals/Hardness testing

16 Pirmasens (Germany)

TC 216 Footwear

16-17 Praha (Czech Republic)

TC 58/SC 2 Gas cylinders/Cylin-der fittings

16-17 Suzhou (China) TC 164/SC 2 Mechanical testing of metals/Ductility testing

17 Tokyo (Japan) TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles

17 Seoul (Korea, Republic of)

TC 153 Valves


TC 153/SC 1 Valves/Design, manu-facture, marking and testing


TC 209 Cleanrooms and as-sociated controlled environments

20-22 Liège (Belgium) TC 266 Biomimetics

20-23 Tokyo (Japan) TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery


JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

20-24 Mexico City (Mexico)

JTC 1/SC 27 Information tech-nology/IT Security techniques

20-24 Strasbourg (France)

JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information


TC 92/SC 3 Fire safety/Fire threat to people and environment


TC 92/SC 4 Fire safety/Fire safety engineering


TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems





TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels

20-24 Nunspeet (Netherlands)

TC 149/SC 1 Cycles/Cycles and major sub-assemblies

20-24 Incheon (Korea, Republic of)

TC 154 Processes, data elements and documents in com-merce, industry and administration

20-24 St. Petersburg, Florida (USA)

* TC 188/SC 1 Small craft/Personal safety equipment

20-24 Berlin (Germany) TC 190 Soil quality

20-24 Berlin (Germany) TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

20-24 Berlin (Germany) TC 190/SC 2 Soil quality/Sampling

20-24 Berlin (Germany) TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

20-24 Berlin (Germany) TC 190/SC 4 Soil quality/Biological methods

20-24 Berlin (Germany) TC 190/SC 7 Soil quality/Soil and site assessment


TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)


TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology


TC 58/SC 3 Gas cylinders/Cylin-der design


TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

22-23 Paris (France) TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability

23 Vienna (Austria) TC 123/SC 6 Plain bearings/Terms and common items


TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications


TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications


TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials


TC 58 Gas cylinders

23-24 Tokyo (Japan) TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium


TC 178 Lifts, escalators and moving walks

24 Vienna (Austria) TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings

24 Paris (France) TC 227 Springs

26-28 Toronto (Canada) TC 59/SC 8 Buildings and civil engineering works/Sealants

26-29 Toronto (Canada) TC 59/SC 15 Buildings and civil engineering works/Performance descrip-tion of houses

27 Panama (Panama)

TC 8/SC 6 Ships and ma-rine technology/Navigation and ship operations

27-28 Paris (France) TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims

27-28 Muelheim (Germany)

TC 147/SC 2 Water quality/Physi-cal, chemical and biochemical methods


PC 280 Management Consultancy

27-30 St-Louis (USA) JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

27-31 Panama (Panama)

TC 8 Ships and marine technology

27-31 Vancouver (Canada)

TC 204 Intelligent transport systems

27-31 Berlin (Germany) TC 264 Fireworks

28 Vienna (Austria) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

28-29 New York (USA) TC 5 Ferrous metal pipes and metallic fittings

28-29 Berlin (Germany) TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort

28-29 Paris (France) TC 290 Online reputation


TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

29 Toronto (Canada) TC 59/SC 14 Buildings and civil engineering works/Design life

29 Vienna (Austria) TC 79 Light metals and their alloys



TC 104/SC 2 Freight containers/Specific purpose containers

29-31 Tokyo (Japan) TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components

31 Toronto (Canada) TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages

October-November 2014

26-1 Toronto (Canada) TC 59 Buildings and civil engineering works

26-1 Toronto (Canada) TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

November 2014

1 Toronto (Canada) TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction

1 Toronto (Canada) TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works

2-7 Belfort (France) TC 184/SC 4 Automation systems and integration/Indus-trial data

2-7 (Unknown) TC 282 Water re-use

3-4 Tel Aviv (Israel) TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation

3-5 Madrid (Spain) * PC 252 Natural gas fuelling stations for vehicles

3-5 Washington, D.C (USA)

TC 241 Road traffic safety management systems

3-7 Singapore (Singapore)

PC 277 Sustainable procurement

3-7 Cape Town (South Africa)



* TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies


TC 45/SC 2 Rubber and rubber products/Testing and analysis

3-7 Wuhan (China) TC 183 Copper, lead, zinc and nickel ores and concentrates

3-7 New Delhi (India) TC 229 Nanotechnologies

5-6 Lisbon (Portugal) TC 34/SC 4 Food products/Cere-als and pulses

5-6 Tel Aviv (Israel) TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

6 Cape Town (South Africa)

TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

6 Istanbul (Turkey) TC 270 Plastics and rubber machines

7 San Diego (USA) TC 22/SC 10 Road vehicles/Impact test procedures

7 San Diego (USA) * TC 22/SC 12 Road vehicles/Pas-sive safety crash protection systems


TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry

10-11 Edinburgh (Unit-ed Kingdom)

TC 171/SC 2 Document manage-ment applications/Application issues

11-14 Ottawa (Canada) TC 244 Industrial furnaces and associated pro-cessing equipment

12 LEMONT (USA) TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment

13-14 Berlin (Germany) * TC 182/SC 1 Geotechnics/Geo-technical investiga-tion and testing

14-20 Beijing (China) TC 130 Graphic technology

14-21 Tel Aviv (Israel) TC 176/SC 1 Quality management and quality assur-ance/Concepts and terminology

15-20 Abu Dhabi (United Arab Emirates)


17-21 Florida (USA) TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures

18-20 Madrid (Spain) TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

19 Trondheim (Norway)

TC 234 Fisheries and aquaculture

19-21 Delft (Netherlands)

TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment


* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

24-28 Paris (France) * PC 287 Chain of custody of wood and wood-based products

24-28 Shenzen (China) TC 211 Geographic in-formation/Geomatics

26-28 Frankfurt (Germany)

* TC 184/SC 1 Automation systems and integration/Physi-cal device control


TC 158 Analysis of gases

December 2014


TC 98 Bases for design of structures

1-5 Dublin (Ireland) TC 260 Human resource management

3-5 Paris (France) TC 269 Railway applications


4-5 Fukuoka (Japan) TC 58/SC 3 Gas cylinders/Cylin-der design

4-5 Fukuoka (Japan) TC 197 Hydrogen technologies


** TC 147/SC 3 Water qual-ity/Radioactivity measurements

9-12 Madrid (Spain) ** PC 273 Customer contact centres

17 Frankfurt (Germany)

TC 291 Domestic gas cook-ing appliances


TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

January 2015

12-16 Weinheim (Germany)

* TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management


* JTC 1/SC 35 Information technol-ogy/User interfaces


* TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

25-29 Foshan (China) ** TC 107 Metallic and other inorganic coatings

25-29 Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

25-29 Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

February 2015


* TC 213 Dimensional and geometrical product specifications and verification

11 Geneva (Switzerland)

* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

22-23 Miami (USA) * TMB Technical Manage-ment Board

St. Petersburg, Florida (USA)

** TC 115 Pumps

March 2015

9-13 (Unknown) ** TC 110/SC 4 Industrial trucks/Rough-terrain trucks

9-13 Morioka (Japan) * TC 223 Societal security

12 West Consho-hocken (Phila-delphia) (USA)

TC 221 Geosynthetics


* COUNCIL Council

23-27 Vienna (Austria) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

Rio de Janeiro (Brazil)

** PC 287 Chain of custody of wood and wood-based products

March-June 2015

25-26 Nara (Japan) * TC 184 Automation systems and integration

March-April 2015

31-2 Montreal (Canada)

* TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment

1st Quarter 2015

(United Kingdom)

** PC 284 Management system for quality of private security company (PSC) operations - Requirements with guidance

Paris (France) * TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

(Asia) ** TC 257 Evaluation of energy savings

April 2015

13-14 Lyon (France) ** TC 117 Fans

13-17 Tienjin (China) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

13-17 (Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

20-24 San Francisco (USA)

* TC 215 Health informatics

21-22 (Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

25 Atlanta (USA) ** TC 6 Paper, board and pulps

(France) ** TC 29 Small tools

(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items

(USA) ** TC 34/SC 15 Food products/Coffee

May 2015

4-7 Toronto (Canada) * TC 68 Financial services


4-8 Kuching (Malaysia)

** JTC 1/SC 27 Information tech-nology/IT Security techniques

4-8 (Unknown) ** TC 36 Cinematography

8-15 Tokyo (Japan) ** TC 10 Technical product documentation

11-12 Kuching (Malaysia)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

11-16 Bologna (Italy) ** TC 130 Graphic technology


** TC 156 Corrosion of metals and alloys

13 Paris (France) ** TC 87 Cork

18-22 (Brazil) ** JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance


** TC 4 Rolling bearings

18-22 Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

18-22 Luzern (Switzerland)

* TC 114 Horology


* TC 228 Tourism and related services


** TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

Glasgow, Scotland (United Kingdom)

** JTC 1/SC 32 Information technolo-gy/Data management and interchange

8-15 Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions

8-15 Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

8-15 Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation

Madrid (Spain) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

Tokyo (Japan) ** TC 113 Hydrometry

Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods

Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures

Tokyo (Japan) ** TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management

Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport

Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water

June 2015

1-5 Sapporo (Japan) ** TC 42 Photography

1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwa-ter acoustics

1-6 Philadelphia (USA)

** TC 147 Water quality

3-5 (Japan) ** TC 145 Graphical symbols

8-12 Berlin (Germany) ** TC 121 Anaesthetic and res-piratory equipment


** REMCO Committee on refer-ence materials

10-11 (France) ** TC 17/SC 9 Steel/Tinplate and blackplate

15-19 Vancouver (Canada)

** TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles


* TMB Technical Manage-ment Board

18-19 Frankfurt (Germany)

* TC 184/SC 2 Automation systems and integration/Robots and robotic devices

22-25 Avignon (France) * TC 54 Essential oils

22-26 (Netherlands) ** TC 34/SC 9 Food products/Microbiology

22-26 (China) ** TC 69 Applications of statis-tical methods

22-26 Göteborg (Sweden)

* TC 188 Small craft

Matsue (Japan) ** JTC 1/SC 28 Information technol-ogy/Office equipment

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

Zurich (Switzerland)

** TC 17/SC 17 Steel/Steel wire rod and wire products

Beijing (China) ** TC 46 Information and documentation

Mexico City (Mexico)

** TC 242 Energy Management

(Unknown) ** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

June-July 2015

30-3 (Cyprus) ** TC 193 Natural gas

30-3 (Cyprus) ** TC 193/SC 3 Natural gas/Upstream area

2nd Quarter 2015

(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

Istanbul (Turkey) ** TC 120 Leather

(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

Vico Equense (Italy)

** TC 184/SC 4 Automation systems and integration/Indus-trial data

1st Semester 2015

London (United Kingdom)

** TC 8/SC 8 Ships and marine technology/Ship design

(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres


July 2015

(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

August-September 2015

31-4 Hokaido (Japan) * JTC 1/SC 35 Information technol-ogy/User interfaces

September 2015


** TC 96 Cranes

13-17 Lahaina, Hawaii (USA)

** TC 127 Earth-moving machinery

14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification


* TMB Technical Manage-ment Board


* GA General Assembly

17-18 Moscow (Rus-sian Federation)

** TC 197 Hydrogen technologies


** COUNCIL Council

Vienna (Austria) ** TC 33 Refractories

Paris (France) ** TC 34/SC 17 Food products/Man-agement systems for food safety

(Japan) ** TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

(Netherlands) ** TC 258 Project, programme and portfolio management

2nd-3rd Quarter 2015

(Europe) ** TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests

October 2015

19-23 (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

26-30 New Delhi (India) * JTC 1/SC 27 Information tech-nology/IT Security techniques

Madrid (Spain) ** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation

(Netherlands) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

Nairobi (Kenya) ** TC 38 Textiles

Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns

Nairobi (Kenya) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

Sao Paulo (Brazil)

** TC 58/SC 2 Gas cylinders/Cylin-der fittings

Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment

(USA) ** TC 92 Fire safety

Santiago (Chile) ** TC 195 Building construc-tion machinery and equipment

November 2015

(China) ** JTC 1 Information technology

4th Quarter 2015

Dayton, Ohio (USA)

** TC 159/SC 3 Ergonomics/An-thropometry and biomechanics

(China) ** TC 282 Water re-use

2nd Semester 2015

(Europe) ** TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco

(USA) ** TC 184/SC 4 Automation systems and integration/Indus-trial data

Month unknown 2015

Brussels (Belgium)

** TC 23 Tractors and machin-ery for agriculture and forestry

(Brazil) ** TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery

(USA) ** TC 27 Solid mineral fuels

(Japan) ** TC 37 Terminology and other language and content resources

(Finland) ** TC 44 Welding and allied processes

(France) ** TC 45 Rubber and rubber products

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom)

** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

(Korea, Repub-lic of)

** TC 206 Fine ceramics

(China) ** TC 274 Light and lighting

January 2016

(China) ** TC 120 Leather

February 2016


(USA) ** TC 213 Dimensional and geometrical product specifications and verification

April 2016

Seoul (Korea, Republic of)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

(Australia) ** TC 178 Lifts, escalators and moving walks

May 2016

(India) ** TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection

November 2016

(Norway) ** JTC 1 Information technology

Month unknown 2016

(Russian Federation)

** REMCO Committee on refer-ence materials

(Australia) ** TC 44 Welding and allied processes

(Malaysia) ** TC 45 Rubber and rubber products

Wellington (New Zealand)

** TC 46 Information and documentation

(Sweden) ** TC 102 Iron ore and direct reduced iron

(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

Documents

ISO Update September 2014 Update, Supplement to ISO Focus -- September 2014 1 International Standards in process An International Standard is the result of an agreement between