ISO Update · ISO Update, Supplement to ISO ... ISO/CD 19281 Air cargo — Fire resistant containers — Design, ... for design conformance testing, quality con-

ISO Update

Supplement to ISOFocus November 2013

ISO Update, Supplement to ISO Focus -- November 2013 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 October to 31 October 2013

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 20 Aircraft and space vehicles

ISO/CD 19281 Air cargo — Fire resistant containers — Design, performance and testing requirements

TC 22 Road vehicles

ISO/CD 10924-1

Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements

ISO/CD 10924-4

Road vehicles — Circuit breakers — Part 4: Medium circuit breakers with tabs (Blade type), Form CB15

ISO/CD 10924-5

Road vehicles — Circuit breakers — Part 5: Circuit breakers with tabs with rated voltage of 450 V

ISO/DTR 12349-1

Road vehicles — Dummies for restraint system testing — Part 1: Adult dummies

ISO/DTR 12349-2

Road vehicles — Dummies for restraint system testing — Part 2: Child dummies

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 789-3 Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters

ISO/CD 18497 Safety of highly automated agricultural machines

TC 28 Petroleum products and lubricants

ISO/DTR 19511-1

Petroleum products — Equivalency of test method determining the same property — Part 1: Atmospheric distillation of petroleum products

TC 29 Small tools

ISO/CD 6789-1 Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance testing, quality con-formance testing and recalibration procedure — Part 1: Requirements and test method for design conformance testing, quality conform-ance testing and calibration procedure

ISO/CD 6789-2 Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance testing, quality con-formance testing and recalibration procedure — Part 2: Requirements for calibration and determination of measurement uncertainly

TC 31 Tyres, rims and valves

ISO/CD 4000-1 Passenger car tyres and rims — Part 1: Tyres (metric series)

TC 34 Food products

ISO/CD 17780 Animal and vegetable fats and oils — Determi-nation of aliphatic hydrocarbons in vegetable oils

ISO/CD 13299 Sensory analysis — Methodology — General guidance for establishing a sensory profile

TC 36 Cinematography

ISO/CD 2969 Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifications and measurements

TC 38 Textiles

ISO/CD 17751-1

Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light Microscopy method

ISO/CD 17751-2

Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning Electron Micros-copy method

ISO/CD 105-G01

Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides

ISO/CD 105-G04

Textiles — Tests for colour fastness — Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities

TC 43 Acoustics

ISO/CD 16717-1

Accoustics — Evaluation of sound insulation spectra by single-numbers — Part 1: Airborne sound insulation

TC 44 Welding and allied processes

ISO/CD 19288 Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of mag-nesium and magnesium alloys — Classification

TC 45 Rubber and rubber products

ISO/CD 48 Rubber, vulcanized or thermoplastic — Deter-mination of hardness (hardness between 10 IRHD and 100 IRHD)

TC 61 Plastics

ISO/CD 16620-4

Plastics — Biobased content — Part 4: Deter-mination of the total biobased mass content

ISO/CD 18188 Plastic straws for food — Specification

TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO/CD 14692-1

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vo-cabulary, symbols, applications and materials

ISO/CD 14692-2

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture

ISO/CD 14692-3

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design

2 ISO Update, Supplement to ISO Focus -- November 2013

ISO/CD 14692-4

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/CD 18319 Fibre-reinforced polymer (FRP) reinforcement for concrete structures: Specifications of FRP sheets

TC 106 Dentistry

ISO/CD 18556 Dentistry — Heidemann spatulas

ISO/CD 18559 Dentistry — Spatulas for dental materials

TC 110 Industrial trucks

ISO/CD 10896-5

Rough-terrain trucks — Safety requirements and verification — Part 5: Interface between rough-terrrain truck and integrated personnel work platform

ISO/CD 10896-7

Rough-terrain trucks — Safety requirements and verification — Part 7: Longitudinal load moment systems

ISO/CD 18479-1

Rough-terrain trucks — Non-integrated personnel work platforms — Part 1: Design requirements

ISO/CD 22915-24

Industrial trucks — Verification of stability — Part 24: Slewing variable-reach trucks

TC 118 Compressors and pneumatic tools, machines and equipment

ISO/CD 18740 Turbocompressors — Performance test code — Complementary to ISO 5389

TC 127 Earth-moving machinery

ISO/CD 14990-1

Earth-moving machinery — Electrical safety of machines utilising electric drives and related components and systems — Part 1: General Requirements

ISO/CD 14990-2

Earth-moving machinery — Electrical safety of machines ut ilising electric drives and related components and systems — Part 2: Particular requirements for externally-powered machines

ISO/CD 14990-3

Earth-moving·machinery·--·Electrical·safety·of·machines·utilising·electric·drives·and·related·components·and·systems — Part 3: Particular requirements for self-powered machines

TC 135 Non-destructive testing

ISO/CD 18249 Non-destructive testing — Acoustic emis-sion — Testing of fibre reinforced polymers — Specific methodology and general evaluation criteria

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 18488 Polyethylene pipes — Resistance to slow crack growth — Strain Hardening test method

ISO/CD 18489 Polyethylene pipes — Resistance to slow crack growth — Cracked Round Bar test method

ISO/CD 8639 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktight-ness of flexible joints

TC 142 Cleaning equipment for air and other gases

ISO/CD 16890-2

Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance

TC 146 Air quality

ISO/CD 12219-7

Interior air of road vehicles — Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements

TC 150 Implants for surgery

ISO/CD 14243-4

Implants for surgery — Wear of total knee pros-theses — Part 4: Wear of the patella-femoral joint — Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

TC 159 Ergonomics

ISO/CD 20685-2

3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO 23550:2011/CD Amd 1

Safety and control devices for gas burners and gas-burning appliances — General require-ments — Amendment 1

TC 171 Document management applications

ISO/CD 22938 Document management — Electronic content/document management (CDM) data inter-change format

TC 172 Optics and photonics

ISO/CD 14490-5

Optics and optical instruments — Test meth-ods for telescopic systems — Part 5: Test methods for transmittance

TC 194 Biological evaluation of medical devices

ISO/DTR 10993-33

Biological evaluation of medical devices — Supplement to ISO 10993-3 — Guidance on tests to evaluate genotoxicity — Part 33:

TC 199 Safety of machinery

ISO/CD 19353 Safety of machinery — Fire prevention and protection

TC 201 Surface chemical analysis

ISO/DTS 18507

Surface Chemical Analysis - Technical Speci-fication for the use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis

ISO/CD 17109 Surface chemical analysis — Depth profiling — A method for sputter rate determination in X-ray photoelectron spectroscopy, Auger elec-tron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using multi-layer thin films

TC 204 Intelligent transport systems

ISO/CD 14827-3

Intelligent transport systems — Data interfaces between centres for transport information and control systems — Part 3: Data interfaces be-tween centres for intelligent transport systems (ITS) using XML

TC 215 Health informatics

ISO/DTR 14639-2

Health informatics — Capacity-based eHealth architecture roadmap — Part 2: Architectural components and maturity model

TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

ISO/CD 24521 Basic on-site domestic wastewater services

TC 229 Nanotechnologies

ISO/DTR 17302

Nanotechnologies — Framework for identifying vocabulary development for nanotechnology applications in human healthcare

TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions


ISO/CD 17741 General technical rules for measurement, calculation and verification of energy savings of projects

JTC 1 Information technology

ISO/IEC 10646/PDAM 1

Information technology — Universal Coded Character Set (UCS) — Amendment 1: Nushu, Tamil supplement, and other characters

ISO/IEC 10373-6:2011/DAmd 7

Identification cards — Test methods — Part 6: Proximity cards — Amendment 7: Frame with error correction

ISO/IEC 15693-3:2009/PDAM 2

Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 2: Clarification of use of Data Elements

ISO/IEC 15693-3:2009/PDAM 4

Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 4: Adding security framework

ISO/IEC PDTS 18822

Technical Specification — File System

ISO/IEC CD 16963

Information technology — Digitally recorded media for information interchange and storage — Test method for the estimation of lifetime of optical media for long-term data storage

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

PC 259 Outsourcing

ISO/DIS 37500 * Guidance on outsourcing

2014-01-08

TC 4 Rolling bearings

ISO/DIS 21107 * Rolling bearings and spheri-cal plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by attribute vocabulary

2014-01-08

(Revision of ISO 21107:2004)

TC 6 Paper, board and pulps

ISO/DIS 12625-9

* Tissue paper and tissue prod-ucts — Part 9: Determination of ball burst strength

2014-03-18

(Revision of ISO 12625-9:2005)

TC 17 Steel

ISO/DIS 11970 * Specification and approval of welding procedures for produc-tion welding of steel castings

2014-03-04


ISO/DIS 11972 * Corrosion-resistant cast steels for general applications

2014-01-04


ISO/DIS 11973 * Heat-resistant cast steels and alloys for general applications

2014-01-04


ISO/DIS 13520 * Determination of ferrite content in austenitic stainless steel castings

2014-01-04


ISO/DIS 13521 * Austenitic manganese steel castings

2014-01-04


ISO/DIS 13583-1

* Centrifugally cast steel and alloy products — Part 1: General test-ing and tolerances

2014-01-04


ISO/DIS 13583-2

* Centrifugally cast steel and alloy products — Part 2: Heat resistant materials

2014-01-04


ISO/DIS 14737 * Cast non-alloy and low alloy steels for general applications

2014-01-04


ISO/DIS 16468 * Investment castings (steel, nickel alloys and cobalt alloys) — Gen-eral technical requirements

2014-01-04


ISO/DIS 19960 * Cast steels and alloys with spe-cial physical properties

2014-01-04



ISO/DIS 14085-1

* Aerospace series — Hydraulic filter elements — Test methods — Part 1: Test sequence

2014-01-24

ISO/DIS 14085-2

* Aerospace series — Hydraulic filter elements — Test methods — Part 2: Conditioning

2014-01-24

ISO/DIS 14085-3

* Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity

2014-01-24

ISO/DIS 14085-4

* Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of col-lapse/burst pressure rating

2014-01-24

ISO/DIS 14085-5

* Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue

2014-01-24

ISO/DIS 14085-6

* Aerospace series — Hydraulic filter elements — Test methods — Part 6: Initial cleanliness level

2014-01-24

TC 22 Road vehicles


ISO/DIS 11451-3.2

* Road vehicles — Vehicle test methods for electrical dis-turbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation



ISO/DIS 9635-4

* Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves

2014-01-17


ISO/DIS 15639-1.2

* Radio frequency identification of animals — Standardization of injection sites for different animal species — Part 1: Companion animals (cats and dogs)

2013-12-10


ISO/DIS 6743-4

* Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems)

2014-03-04


TC 29 Small tools

ISO 3919:2005/DAmd 1

* Coated abrasives — Flap wheels with shaft — Amendment 1

2014-01-22

TC 35 Paints and varnishes

ISO/DIS 3233-3

* Paints and varnishes — Determi-nation of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter con-tent determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material

2014-03-18


ISO/DIS 8502-2

* Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Labora-tory determination of chloride on cleaned surfaces

2014-03-04


ISO/DIS 8502-12

* Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanli-ness — Part 12: Field method for the titrimetric determination of water-soluble ferrous ions

2014-03-04


TC 37 Terminology and other language and content resources

ISO/DIS 13611.2

* Interpreting — Guidelines for community interpreting

2013-12-22

TC 38 Textiles

ISO/DIS 13629-2

* Textiles — Determination of anti-fungal activity of textile products — Part 2: Plate count method

2014-01-24

TC 43 Acoustics

ISO/DIS 1683 * Acoustics — Preferred reference values for acoustical and vibra-tory levels

2014-03-04


ISO/DIS 16283-2

* Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation

2014-03-11

(Revision of ISO 140-7:1998, ISO 140-14:2004)


ISO/DIS 16237 * Mechanical joining — Destruc-tive testing of joints — Specimen dimensions and test procedure for cross-tension testing of single joints

2014-01-15


ISO/DIS 5772 * Rubber and Plastic Hoses and Hose Assemblies for meas-ured fuel dispensing systems — Specification

2014-01-10


ISO/DIS 13363 * Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification

2014-01-10

(Revision of ISO 13363:2004, ISO 13363:2004/Cor 1:2008)

TC 46 Information and documentation

ISO/DIS 21127 * Information and documentation — A reference ontology for the interchange of cultural heritage information

2014-01-10


ISO/DIS 17316 * Information and documenta-tion — International standard link identifier (ISLI)

TC 48 Laboratory equipment

ISO/DIS 384 * Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments


ISO/DIS 3819 * Laboratory glassware — Beakers


ISO/DIS 4796-1

* Laboratory glassware — Bottles — Part 1: Screw-neck bottles


ISO/DIS 16496 * Laboratory glassware — Vac-uum-jacketed vessels for heat insulation

TC 58 Gas cylinders

ISO/DIS 11119-4

* Gas cylinders — Refillable com-posite gas cylinders and tubes — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 L with load-sharing welded metal-lic liners

2014-01-16

TC 59 Buildings and civil engi-neering works


ISO/DIS 16757-1

* Product Data for Building Services System Models — Part 1: Concepts, architecture and model

2014-01-10

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 19901-5

* Petroleum and natural gas indus-tries — Specific requirements for offshore structures — Part 5: Weight control during engineer-ing and construction

2014-03-04


TC 70 Internal combustion engines

ISO/DIS 8178-7

* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 7: Engine family determination

2014-01-05


ISO/DIS 8178-8

* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 8: Engine group determination

2014-01-05


TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/DIS 15673 * Guidelines for the simplified design of structural reinforced concrete for buildings

2014-01-10


ISO/DIS 10406-1

* Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids

2014-01-08


ISO/DIS 10406-2

* Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets

2014-01-08


TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use

ISO/DIS 1135-4

* Transfusion equipment for medi-cal use — Part 4: Transfusion sets for single use, gravity feed

2014-03-04


ISO/DIS 1135-5

* Transfusion equipment for medi-cal use — Part 5: Transfusion sets for single use with pressure infusion apparatus

2014-03-04

(Revision of ISO 1135:1977, ISO 1135-4:2012)

ISO/DIS 3826-4

* Plastics collapsible contain-ers for human blood and blood components — Part 4: Aphaer-esis blood bag systems with integrated features

2014-03-11

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/DIS 12312-2

* Eye and face protection — Sun-glasses and related eyewear — Part 2: Filters for direct observa-tion of the sun

ISO/DIS 16900-8

* Respiratory protective devices — Methods of test and test equip-ment — Part 8: Measurement of RPD air flow rates of assisted filtering RPD

2014-01-15

TC 96 Cranes

ISO/DIS 11660-2

* Cranes — Access, guards and restraints — Part 2: Mobile cranes

2014-01-10


ISO/DIS 11662-2

* Cranes — Experimental deter-mination of crane performance — Part 2: Structural competence under static loading

ISO/DIS 4306-3

* Cranes — Vocabulary — Part 3: Tower cranes

2014-01-10

(Revision of ISO 4306-3:2003, ISO 4306-3:2003/Amd 1:2011)

ISO/DIS 17096 * Cranes — Safety — Load lifting attachments

2014-01-29

TC 106 Dentistry

ISO/DIS 4823 * Dentistry — Elastomeric impres-sion materials

2014-03-11

(Revision of ISO 4823:2000, ISO 4823:2000/Cor 1:2004, ISO 4823:2000/Amd 1:2007)


ISO/DIS 22915-12

* Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer

2014-01-24

TC 130 Graphic technology

ISO/DIS 16760 * Graphic technology — Prepress data exchange — Preparation and visualization of RGB images to be used in RGB-based graph-ics arts workflows

2014-01-29

TC 131 Fluid power systems

ISO/DIS 10762 * Hydraulic fluid power — Mount-ing dimensions for cylinders, 10 MPa (100 bar) series [Revision of ISO 10762: 1997]

2014-01-16


TC 145 Graphical symbols

ISO 7001:2007/DAmd 52

* Graphical symbols — Public information symbols — Amend-ment 52: Symbol PI CF 012: Foot care or podiatry

2014-01-18

ISO 7001:2007/DAmd 53

* Graphical symbols — Public information symbols — Amend-ment 53: Symbol PI CF 015: Barber or hair salon

2014-01-18

ISO 7001:2007/DAmd 54

* Graphical symbols — Public information symbols — Amend-ment 54: Symbol PI CF 016: Cinema

2014-01-18


ISO 7001:2007/DAmd 55

* Graphical symbols — Public information symbols — Amend-ment 55: Symbol PI CF 017: Car repair workshop

2014-01-18

ISO 7001:2007/DAmd 56

* Graphical symbols — Public information symbols — Amend-ment 56: Symbol PI CF 018: Wireless LAN

2014-01-18

ISO 7001:2007/DAmd 58

* Graphical symbols — Public information symbols — Amend-ment 58: Symbol PI PF 067: Pedestrian underpass

2014-01-18

ISO 7001:2007/DAmd 59

* Graphical symbols — Public information symbols — Amend-ment 59: Symbol PI PF 068: Baggage delivery

2014-01-18

ISO 7001:2007/DAmd 60

* Graphical symbols — Public information symbols — Amend-ment 60: Symbol PI TF 037: Security check

2014-01-18

ISO 7001:2007/DAmd 62

* Graphical symbols — Public information symbols — Amend-ment 62: Symbol PI PB 008: Surveillance camera

2014-01-18

ISO 7001:2007/DAmd 63

* Graphical symbols — Public information symbols — Amend-ment 63: Symbol PI PF 069: Baggage assistant

2014-01-18

ISO 7001:2007/DAmd 64

* Graphical symbols — Public information symbols — Amend-ment 64: Symbol PI PF 070: Embassy

2014-01-18

ISO 7001:2007/DAmd 65

* Graphical symbols — Public information symbols — Amend-ment 65: Symbol PI TC 017: Beach

2014-01-18

ISO 7001:2007/DAmd 66

* Graphical symbols — Public information symbols — Amend-ment 66: Symbol PI TC 018: Planetarium

2014-01-18

ISO 7001:2007/DAmd 67

* Graphical symbols — Public information symbols — Amend-ment 67: Symbol PI TF 030: Baggage weighing

2014-01-18

ISO 7001:2007/DAmd 72

* Graphical symbols — Public information symbols — Amend-ment 72: Symbol PI TF 035: Water taxi

2014-01-18

ISO 7001:2007/DAmd 73

* Graphical symbols — Public information symbols — Amend-ment 73: Symbol PI CF 010 Rev: Conference facilities or meeting room

2014-01-18

ISO 7010:2011/DAmd 172

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 172: Safety sign F016: Fire blanket

2014-01-22

ISO 7010:2011/DAmd 179

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 179: Safety sign W039: Warning; Falling ice

2014-01-22

ISO 7010:2011/DAmd 180

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 180: Safety sign W040: Warning; Roof avalanche

2014-01-22

TC 154 Processes, data ele-ments and documents in commerce, industry and administration

ISO/DIS 15000-5

* Electronic Business Extensible Markup Language (ebXML) — Part 5: Core Components Specification

2014-01-08

(Revision of ISO/TS 15000-5:2005, ISO/TS 15000-5:2005/Amd 1:2011)

TC 156 Corrosion of metals and alloys

ISO/DIS 17224 * Corrosion of metals and al-loys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances

2014-01-22

ISO/DIS 17245 * Corrosion of metals and alloys — Test method for high tempera-ture corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions

2014-01-22

ISO/DIS 17248 * Corrosion of metals and alloys — Test method for high tempera-ture corrosion testing of metallic materials by embedding in salt, ash, or other solids

2014-01-22

TC 159 Ergonomics

ISO/DIS 9241-392

* Ergonomics of human-system interaction — Part 392: Ergo-nomic recommendations for the reduction of visual fatigue from stereoscopic images

TC 168 Prosthetics and orthotics

ISO/DIS 16955 * Prosthetics — Quantification of physical parameters of ankle foot devices and foot units

TC 188 Small craft

ISO 10240:2004/DAmd 1

* Small craft — Owner's manual — Amendment 1

2014-03-25

TC 201 Surface chemical analysis

ISO/DIS 11775 * Surface chemical analysis — Scanning-probe microscopy — Determination of cantilever normal spring constants

2014-01-16


ISO 14906:2011/DAmd 1

* Electronic fee collection — Ap-plication interface definition for dedicated short-range communi-cation — Amendment 1

2014-03-11

TC 211 Geographic information/Geomatics

ISO/DIS 19103 * Geographic information — Con-ceptual schema language

2014-01-05

(Revision of ISO/TS 19103:2005)

ISO/DIS 19109 * Geographic information — Rules for application schema

2014-03-11



ISO/HL7 DIS 10781.2

* Electronic Health Record-System Functional Model, Release 2.0 (EHR FM)

2014-01-08


(Revision of ISO/HL7 10781:2009)

ISO/HL7 DIS 16527.2

* Personal Health Record System Functional Model, Release 1 (PHR-S FM)

2013-12-04

TC 228 Tourism and related services

ISO/DIS 13009 * Beaches — Criteria to render the service

2014-01-21

ISO/DIS 18065 * Natural Protected Areas - Tourist services for public use provided by Natural Protected Areas Authorities - Requirements

2014-01-08


ISO/IEC DIS 13157-1

* Information technology — Tel-ecommunications and informa-tion exchange between systems — NFC Security — Part 1: NFC-SEC NFCIP-1 security services and protocol

2014-01-03

(Revision of ISO/IEC 13157-1:2010)

ISO/IEC DIS 19369

* Information technology — NFCIP-2 test methods

2014-01-03

ISO/IEC DIS 19395

* Smart Data Centre Resource Monitoring and Control

2014-01-22

ISO/IEC DIS 10646

* Information technology — Uni-versal Coded Character Set (UCS)

2014-01-15

(Revision of ISO/IEC 10646:2012, ISO/IEC 10646:2012/Amd 1:2013)

ISO/IEC DIS 24744

* Software Engineering — Metamodel for Development Methodologies

2014-01-08

(Revision of ISO/IEC 24744:2007, ISO/IEC 24744:2007/Amd 1:2010)

ISO/IEC DIS 8484

* Information technology — Mag-netic stripes on savingsbooks

2014-01-24

(Revision of ISO/IEC 8484:2007)

ISO/IEC 18013-3:2009/DAmd 2

* Information technology — Per-sonal identification — ISO-compliant driving licence — Part 3: Access control, authentica-tion and integrity validation — Amendment 2: Extended Access Control v1

ISO/IEC DIS 24775-1

* Information technology — Stor-age management — Part 1: Overview


ISO/IEC DIS 24775-2

* Information technology — Stor-age management — Part 2: Common Architecture


ISO/IEC DIS 24775-3

* Information technology — Stor-age management — Part 3: Common Profiles


ISO/IEC DIS 24775-4

* Information technology — Stor-age management — Part 4: Block Devices


ISO/IEC DIS 24775-5

* Information technology — Stor-age management — Part 5: File systems


ISO/IEC DIS 24775-6

* Information technology — Stor-age management — Part 6: Fabric


ISO/IEC DIS 24775-7

* Information technology — Stor-age management — Part 7: Host Elements


ISO/IEC DIS 24775-8

* Information technology — Stor-age management — Part 8: Media Libraries


ISO/IEC DIS 17629

* Information technology — Of-fice equipment — Method for measuring first print out time for digital printing devices

2014-01-29

ISO/IEC DIS 24734

* Information technology — Office equipment — Method for meas-uring digital printing productivity — Revision draft


ISO/IEC 13818-1:2013/DAmd 5

* Information technology — Ge-neric coding of moving pictures and associated audio infor-mation — Part 1: Systems — Amendment 5: Transport of MVC depth video sub-bitstream and extensions to support HEVC low delay coding mode

ISO/IEC 14496-5:2001/DAmd 32

* Information technology — Cod-ing of audio-visual objects — Part 5: Reference software — Amendment 32: Reference software multi-resolution 3D mesh compression

2014-01-17

ISO/IEC 14496-18:2004/DAmd 1

* Information technology — Cod-ing of audio-visual objects — Part 18: Font compression and streaming — Amendment 1: Updated semantics of decod-erSpecificInfo and font data description for ISOBMFF

2014-01-17

ISO/IEC 21000-8:2008/DAmd 3

* Information technology — Mul-timedia framework (MPEG-21) — Part 8: Reference software — Amendment 3: Contract Expression Language (CEL) and Media Contract Ontology (MCO) Reference Software

2014-01-17

ISO/IEC 23008-2/DAmd 1

* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 1: Range extensions

2014-01-17


ISO/IEC 23008-2/DAmd 2

* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 2: Multi-view extensions

2014-01-17

ISO/IEC DIS 23008-5

* Information technology — High efficiency coding and media delivery in heterogeneous environments

— Part 5: HEVC Conformance testing and reference software

2014-01-17

ISO/IEC DIS 23008-8

* Information technology — High efficiency coding and media de-livery in heterogeneous environ-ments — Part 8: Conformance Specification for HEVC

2014-01-17

ISO/IEC 29199-4:2010/DAmd 1

* Information technology — JPEG XR image coding system — Part 4: Conformance testing — Amendment 1: Additional JPEG XR conformance test streams

2014-01-17

ISO/IEC DIS 18004

* Information technology — Au-tomatic identification and data capture techniques — QR Code bar code symbology specification

2014-01-05


ISO/IEC DIS 30108-1

* Information Technology — Bio-metric Identity Assurance Ser-vices — Part 1: BIAS Services

2014-01-04

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

PC 251 Asset management

ISO/FDIS 55000

* Asset management — Overview, principles and terminology

2013-12-08

ISO/FDIS 55001

* Asset management — Manage-ment systems — Requirements

2013-12-08

ISO/FDIS 55002

* Asset management — Manage-ment systems — Guidelines for the application of ISO 55001

2013-12-08


ISO/FDIS 16127

* Space systems — Preven-tion of break-up of unmanned spacecraft

2013-12-08

ISO/FDIS 16691

* Space systems — Thermal control coatings for spacecraft — General requirements

2013-12-26

ISO/FDIS 16695

* Space environment (natural and artificial) — Geomagnetic refer-ence models

2013-12-08

TC 22 Road vehicles

ISO/FDIS 8820-2

* Road vehicles — Fuse-links — Part 2: User guidelines


ISO/FDIS 10924-2

* Road vehicles — Circuit break-ers — Part 2: User's guide

2013-12-26


ISO/FDIS 22854

* Liquid petroleum products — Determination of hydrocar-bon types and oxygenates in automotive-motor gasoline — Multidimensional gas chroma-tography method

2013-12-11


TC 29 Small tools

ISO/FDIS 2351-3

* Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 3: Screwdriver bits for hexagon socket screws

2013-12-10


TC 34 Food products

ISO/FDIS 8968-1

* Milk and milk products — De-termination of nitrogen content — Part 1: Kjeldahl principle and crude protein calculation

2013-12-18

(Revision of ISO 5549:1978, ISO 8968-1:2001, ISO 8968-2:2001)

ISO/FDIS 6539 * Cinnamon (Cinnamomum zey-lanicum Blume) — Specification

2013-12-22


TC 38 Textiles

ISO/FDIS 2403 * Textiles — Cotton fibres — De-termination of micronaire value

2013-12-26


ISO/FDIS 13935-1

* Textiles — Seam tensile proper-ties of fabrics and made-up tex-tile articles — Part 1: Determina-tion of maximum force to seam rupture using the strip method

2014-01-11


ISO/FDIS 13935-2

* Textiles — Seam tensile proper-ties of fabrics and made-up tex-tile articles — Part 2: Determina-tion of maximum force to seam rupture using the grab method

2014-01-11


TC 41 Pulleys and belts (including veebelts)


ISO/FDIS 1813 * Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test

2013-12-08


TC 43 Acoustics

ISO/FDIS 16283-1

* Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation

2013-12-04

(Revision of ISO 140-4:1998, ISO 140-5:1998, ISO 140-7:1998, ISO 140-14:2004)


ISO/FDIS 5826 * Resistance welding equipment — Transformers — General specifications applicable to all transformers

2013-12-25


ISO/FDIS 5817 * Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections

2013-12-04



ISO/FDIS 2929 * Rubber hoses and hose as-semblies for bulk fuel delivery by truck — Specification

2013-12-12


ISO/FDIS 10282

* Single-use sterile rubber surgical gloves — Specification

2013-12-08


ISO/FDIS 14285

* Rubber and plastics gloves for food services — Limits for extractable substances

TC 61 Plastics

ISO/FDIS 15850

* Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach

2013-12-03

(Revision of ISO 15850:2002, ISO 15850:2002/DAmd 1)

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 13085

* Petroleum and natural gas indus-tries — Aluminium alloy pipe for use as tubing for wells

2013-12-04

ISO/FDIS 27627

* Petroleum and natural gas indus-tries — Aluminium alloy drill pipe thread connection gauging

2013-12-04

TC 89 Wood-based panels

ISO/FDIS 13608

* Decorative veneered plywood

2013-12-19

ISO/FDIS 13609

* Blockboards and battenboards

2013-12-05

TC 96 Cranes

ISO/FDIS 10245-2

* Cranes — Limiting and indicating devices — Part 2: Mobile cranes

2013-12-12



ISO 21536:2007/FDAmd 1

* Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants — Amendment 1

2013-12-04

TC 163 Thermal performance and energy use in the built environment

ISO/FDIS 14857

* Thermal performance in the built environment — Determination of air permeance of building materials


ISO/FDIS 8600-4

* Endoscopes — Medical endo-scopes and certain accessories — Part 4: Determination of maxi-mum width of insertion portion

2013-12-22


TC 173 Assistive products for per-sons with disability

ISO/FDIS 12505-1

* Skin barrier for ostomy aids — Test methods — Part 1: Size, surface pH and water-absorbency

2013-12-05

TC 176 Quality management and quality assurance

ISO/FDIS 18091

* Quality management systems — Guidelines for the applica-tion of ISO 9001:2008 in local government

2013-12-26

(Revision of IWA 4:2009)

TC 184 Automation systems and integration

ISO/FDIS 13482

* Robots and robotic devices — Safety requirements for personal care robots

2013-12-04

TC 190 Soil quality

ISO/FDIS 11267

* Soil quality — Inhibition of repro-duction of Collembola (Folsomia candida) by soil contaminants

2013-12-11


TC 202 Microbeam analysis

ISO/FDIS 17470

* Microbeam analysis — Electron probe microanalysis — Guide-lines for qualitative point analysis by wavelength dispersive X-ray spectrometry

2013-12-05


TC 210 Quality management and corresponding general as-pects for medical devices

IEC 62366:2007/FDAmd 1

* Medical devices — Application of usability engineering to medi-cal devices — Amendment 1



ISO/FDIS 18104

* Health informatics — Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems

2013-12-04


ISO/FDIS 20302

* Health informatics — Health cards — Numbering system and registration procedure for issuer identifiers

2013-12-11


TC 249 Traditional chinese medicine

ISO/FDIS 17218

* Sterile acupuncture needles for single use

2013-12-25


ISO/IEC FDIS 19508

* Information technology — Object Management Group — Meta Object Facility (MOF) Core

2013-12-03

ISO/IEC FDIS 19509

* Information technology — Object Management Group XML Meta-data Interchange (XMI)

2013-12-03

ISO/IEC FDIS 29182-3

* Information technology — Sen-sor networks: Sensor Network Reference Architecture (SNRA) — Part 3: Reference architecture views

2013-12-12

ISO/IEC FDIS 25063

Systems and software engineer-ing — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description

2013-12-16

ISO/IEC 10373-6:2011/FDAmd 5

* Identification cards — Test methods — Part 6: Proximity cards — Amendment 5: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC

2013-12-03

ISO/IEC 24727-3:2008/FDAmd 1

* Identification cards — Inte-grated circuit card programming interfaces — Part 3: Application interface — Amendment 1: .

ISO/IEC 24727-4:2008/FDAmd 1

* Identification cards — Inte-grated circuit card programming interfaces — Part 4: Application programming interface (API) ad-ministration — Amendment 1: .

ISO/IEC FDIS 27036-1

* Information technology — Se-curity techniques — Information security for supplier relation-ships — Part 1: Overview and concepts

2013-12-03

ISO/IEC FDIS 27038

* Information technology — Secu-rity techniques — Specification for digital redaction

ISO/IEC FDIS 29147

* Information technology — Secu-rity techniques — Vulnerability disclosure

2013-12-03

Standards published

New International Standards published between 01 October and 31 October 2013


** French version of standard previously published in English only

Price

group

TC 1 Screw threads

ISO 16239:2013

Metric series wires for measuring screw threads

C


ISO 5636-3:2013

* Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method

G

ISO 5636-4:2013

* Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method

G

ISO 5636-5:2013

* Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method

F

ISO 8791-2:2013

Paper and board — Determination of roughness/smoothness (air leak meth-ods) — Part 2: Bendtsen method

H


ISO 16290:2013

* Space systems — Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment

F

ISO 16404:2013

* Space systems — Programme management — Requirements management

H

TC 22 Road vehicles

ISO 6622-2:2013

* Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel

L

ISO 6550-3:2013

* Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs

E

ISO 28741:2013

* Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions

N

ISO 11898-6:2013

* Road vehicles — Controller area network (CAN) — Part 6: High-speed medium access unit with selective wake-up functionality

G


ISO 14229-5:2013

* Road vehicles — Unified diagnostic services (UDS) — Part 5: Unified di-agnostic services on Internet Protocol implementation (UDSonIP)

H

ISO 13052:2013

* Road vehicles — Trailers up to 3,5 t — Requirements for jockey wheels and drawbar supports

C

TC 23 Tractors and machinery for agri-culture and forestry

ISO 12934:2013

* Tractors and machinery for agri-culture and forestry — Basic types — Vocabulary

D

ISO 9912-2:2013

* Agricultural irrigation equipment — Filters for microirrigation — Part 2: Strainer-type filters and disc filters

E

TC 27 Solid mineral fuels

ISO 334:2013 * Solid mineral fuels — Determination of total sulfur — Eschka method

D

TC 29 Small tools

ISO 7388-3:2013

Tool shanks with 7/24 taper for auto-matic tool changers — Part 3: Reten-tion knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF

E

ISO/TS 13399-301:2013

* Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies

M

ISO/TS 13399-302:2013

* Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on proper-ties according to ISO/TS 13399-3: Modelling of solid drills and counter-sinking tools

T

ISO 10649-2:2013

Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

C

ISO 10649-3:2013

Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

C

ISO 10649-4:2013

Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer

C

TC 34 Food products

ISO 11816-1:2013

Milk and milk products — Determina-tion of alkaline phosphatase activity — Part 1: Fluorimetric method for milk and milk-based drinks

G

ISO/TS 17919:2013

Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Detection of botulinum type A, B, E and F neurotoxin-producing clostridia

T

ISO 5985:2002 Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid

D

ISO 13495:2013

Foodstuffs — Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid

G

TC 42 Photography

ISO 18939:2013

* Imaging materials — Digital hard copy for medical imaging — Methods of measuring permanence

N


ISO 10225:2013

Gas welding equipment — Marking for equipment used for gas welding, cut-ting and allied processes

A

TC 46 Information and documentation

ISO 27729:2012/Cor 1:2013

Information and documentation — International standard name identifier (ISNI) — Technical Corrigendum 1

free

TC 54 Essential oils

ISO 9841:2013 Essential oil of hyssop (Hyssopus of-ficinalis L. ssp. officinalis)

D

TC 58 Gas cylinders

ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing

N

ISO 12209:2013

Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air

J

ISO/TR 16115:2013

* Gas cylinders — Classification of im-perfections arising during the manufac-ture of seamless steel and aluminium alloy gas cylinders

L

TC 61 Plastics

ISO 10123:2013

* Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens

D

TC 69 Applications of statistical methods

ISO 22514-2:2013

* Statistical methods in process man-agement — Capability and perfor-mance — Part 2: Process capability and performance of time-dependent process models

L

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO/ASTM 51939:2013

* Practice for blood irradiation dosimetry

G

ISO 21483:2013

Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2

C

TC 86 Refrigeration and air-conditioning

ISO 16358-1:2013/Cor 1:2013

* Air-cooled air conditioners and air-to-air heat pumps — Testing and calculat-ing methods for seasonal performance factors — Part 1: Cooling seasonal performance factor — Technical Cor-rigendum 1

free


ISO 16358-2:2013/Cor 1:2013

* Air-cooled air conditioners and air-to-air heat pumps — Testing and calculat-ing methods for seasonal performance factors — Part 2: Heating seasonal performance factor — Technical Cor-rigendum 1

free

TC 92 Fire safety

ISO 12468-1:2013

* External exposure of roofs to fire — Part 1: Test method

M

ISO 12468-2:2013

* External exposure of roofs to fire — Part 2: Classification of roofs

C

TC 94 Personal safety -- Protective clothing and equipment

ISO 17249:2013

Safety footwear with resistance to chain saw cutting

J

ISO 16900-11:2013

Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision

F

ISO/TS 16976-5:2013

* Respiratory protective devices — Hu-man factors — Part 5: Thermal effects

H


ISO 22915-13:2012/Cor 1:2013

* Industrial trucks — Verification of sta-bility — Part 13: Rough-terrain trucks with mast — Technical Corrigendum 1

free

TC 123 Plain bearings

ISO 7902-1:2013

* Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure

P

TC 131 Fluid power systems

ISO 1179-1:2013

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports

C

ISO 1179-2:2013

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

E

TC 135 Non-destructive testing

ISO 10878:2013

* Non-destructive testing — Infrared thermography — Vocabulary

N

TC 146 Air quality

ISO 25597:2013

Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cy-clone samplers and sample dilution

V

ISO 13137:2013

Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods

P

TC 147 Water quality

ISO 13163:2013

Water quality — Lead-210 — Test method using liquid scintillation counting

J

ISO 14189:2013

* Water quality — Enumeration of Clostridium perfringens — Method us-ing membrane filtration

F

ISO 16191:2013

Water quality — Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum

L


ISO 16087:2013

* Implants for surgery — Roentgen stereophotogrammetric analysis for the assessment of migration of orthopae-dic implants

F

TC 164 Mechanical testing of metals

ISO 7802:2013 Metallic materials — Wire — Wrapping test

A


ISO 8038:2013 * Microscopes — Screw threads for objectives and related nosepieces

C

TC 173 Assistive products for persons with disability

ISO 17049:2013

Accessible design — Application of braille on signage, equipment and appliances

D

TC 189 Ceramic tile

ISO 10545-9:2013

Ceramic tiles — Part 9: Determination of resistance to thermal shock

B

ISO 13007-2:2013

* Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives

M

TC 190 Soil quality

ISO/TS 17073:2013

* Soil quality — Determination of trace elements in aqua regia and nitric acid digests — Graphite furnace atomic ab-sorption spectrometry method (GFAAS)

E

TC 193 Natural gas

ISO 13734:2013

Natural gas — Organic components used as odorants — Requirements and test methods

E


ISO/TR 14806:2013

Intelligent transport systems — Public transport requirements for the use of payment applications for fare media

P

ISO/TS 17444-2:2013

* Electronic fee collection — Charging performance — Part 2: Examination Framework

X

ISO/TS 17931:2013

* Intelligent transport systems — Exten-sion of map database specifications for Local Dynamic Map for applications of Cooperative ITS

XA


ISO/TS 18234-1:2013

* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 1: Introduction, numbering and versions (TPEG1-INV)

C

ISO/TS 18234-2:2013

* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 2: Syntax, semantics and framing struc-ture (TPEG1-SSF)

Q

ISO/TS 18234-7:2013

* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 7: Parking information (TPEG1-PKI)

X

ISO/TS 18234-9:2013

* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 9: Traffic event compact (TPEG1-TEC)

X

ISO/TS 18234-10:2013

* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 10: Conditional access information (TPEG1-CAI)

T

TC 206 Fine ceramics

ISO 14604:2012

Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of fracture strain

F

ISO 14605:2013

Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting pho-tocatalytic materials used under indoor lighting environment

D

TC 207 Environmental management

ISO/TS 14067:2013

Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication

U

TC 213 Dimensional and geometrical product specifications and verification

ISO/TS 8062-2:2013

* Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules

U

TC 218 Timber

ISO 8965:2013 * Logging industry — Technology — Terms and definitions

A


ISO/TS 80004-6:2013

* Nanotechnologies — Vocabulary — Part 6: Nano-object characterization

M

TC 262 Risk management

ISO/TR 31004:2013

* Risk management — Guidance for the implementation of ISO 31000

R

IULTCS International Union of Leather Technologists and Chemists Societies

ISO 17489:2013

Leather — Chemical tests — Deter-mination of tan content in synthetic tanning agents

C


ISO/IEC TR 29181-4:2013

* Information technology — Future Network — Problem statement and requirements — Part 4: Mobility

L

ISO/IEC 15026-1:2013

* Systems and software engineering — Systems and software assurance — Part 1: Concepts and vocabulary

M

ISO/IEC TR 20000-5:2013

* Information technology — Service management — Part 5: Exemplar im-plementation plan for ISO/IEC 20000-1

S

ISO/IEC TR 20000-10:2013

* Information technology — Service management — Part 10: Concepts and terminology

K

ISO/IEC 29155-2:2013

* Systems and software engineering — Information technology project per-formance benchmarking framework — Part 2: Requirements for benchmarking

M

ISO/IEC TR 90006:2013

* Information technology — Guidelines for the application of ISO 9001:2008 to IT service management and its integra-tion with ISO/IEC 20000-1:2011

W

ISO/IEC 14443-4:2008/Amd 3:2013

* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol — Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC

XZ

ISO/IEC 29121:2013

* Information technology — Digitally recorded media for information inter-change and storage — Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks

L

ISO/IEC 14776-333:2013

* Information technology — Small Computer System Interface (SCSI) — Part 333: SCSI Stream Commands - 3 (SSC-3)

XC

ISO/IEC 29101:2013

* Information technology — Security techniques — Privacy architecture framework

T

ISO/IEC 30111:2013

* Information technology — Security techniques — Vulnerability handling processes

F

ISO/IEC 11160-2:2013

* Information technology — Office equipment — Minimum information to be included in specification sheets — Printers — Part 2: Class 3 and Class 4 printers

J

ISO/IEC TR 20943-5:2013

* Information technology — Procedures for achieving metadata registry content consistency — Part 5: Metadata map-ping procedure

G

ISO/IEC TR 20943-6:2013

* Information technology — Procedures for achieving metadata registry content consistency — Part 6: Framework for generating ontologies

G

ISO/IEC 13250-3:2013

* Information technology — Topic Maps — Part 3: XML syntax

M


Standards confirmed

The following International Standards are confimred for a five year period:


ISO 2144:1997 (reconfirmed)

ISO 4046-1:2002 (reconfirmed)


























TC 22 Road vehicles

ISO 22241-3:2008


ISO 6814:2009

ISO 8082-1:2009






TC 27 Solid mineral fuels


TC 31 Tyres, rims and valves


TC 34 Food products














TC 36 Cinematography



TC 38 Textiles


ISO 105-A04:1989 (reconfirmed)

ISO 105-A05:1996 (reconfirmed)

ISO 105-C09:2001 (reconfirmed)







TC 42 Photography







TC 47 Chemistry




ISO 2460:1973

ISO 2461:1973

ISO 2462:1973


ISO 2466:1973

ISO 2992:1974

ISO 2993:1974


ISO 3332:1975

ISO 3423:1975








ISO 7105:1985

ISO 7106:1985


ISO 7108:1985

ISO 7109:1985

TC 58 Gas cylinders


TC 61 Plastics




ISO 845:2006

ISO 1663:2007

TC 68 Financial services

ISO 11568-4:2007

ISO 19092:2008

TC 69 Applications of statistical methods


TC 85 Nuclear energy, nuclear technologies, and radiological protection





TC 119 Powder metallurgy



TC 127 Earth-moving machinery



TC 138 Plastics pipes, fittings and valves for the transport of fluids












TC 159 Ergonomics




TC 160 Glass in building

ISO/TS 29584:2012


ISO 10110-11:1996

(reconfirmed)


ISO 14132-5:2008

ISO 21094:2008



TC 173 Assistive products for persons with disability



ISO 16840-1:2006

TC 174 Jewellery


ISO/TR 11211:1995

ISO 11596:2008

TC 180 Solar energy



TC 184 Automation systems and integration

ISO/TS 10303-35:2003

ISO 10303-109:2004

(reconfirmed)

ISO 10303-204:2002

(reconfirmed)

ISO 10303-218:2004

(reconfirmed)



ISO/TS 18876-1:2003

ISO/TS 18876-2:2003

TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

ISO 24510:2007

ISO 24511:2007

ISO 24512:2007

TC 226 Materials for the production of primary aluminium






TC 228 Tourism and related services

ISO 24803:2007


ISO/TR 9547:1988

ISO/IEC TR 10034:1990

ISO/IEC TR 10176:2003

ISO/IEC TR 10182:1993

ISO/IEC 10967-3:2006

ISO/IEC TR 11017:1998

ISO/IEC 13568:2002

(reconfirmed)

ISO/IEC 13816:2007


ISO/IEC TR 14369:1999

ISO/IEC 15145:1997

(reconfirmed)


Standards withdrawn


TC 34 Food products

ISO 4052:1983 (replaced by )

TC 38 Textiles

ISO/TR 14510:1997

(replaced by )


ISO 17655:2003 (replaced by )

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 12184:1994 (replaced by ISO 21483:2013)

TC 213 Dimensional and geometrical product specifications and verification

ISO/TR 5460:1985 (replaced by )


ISO/IEC TR 15026-1:2010

(replaced by ISO/IEC 15026-1:2013)

Meeting calendar

(update at 01 October 2013)

Meetings called for the month of September are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

October-November 2013

28-1 Bali (Indonesia) TC 45 Rubber and rubber products

28-1 Cambridge, Massachusetts (USA)

TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment

28-2 Berlin (Germany) TC 130 Graphic technology

November 2013

1 Bali (Indonesia) TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry

2-9 Porto (Portugal) TC 176/SC 1 Quality management and quality assur-ance/Concepts and terminology

3-8 Gyeongju (Ko-rea, Republic of)

TC 184/SC 4 Automation systems and integration/Indus-trial data

4 Berlin (Germany) TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts

4-8 Sydney (Australia)

TC 34/SC 17 Food products/Man-agement systems for food safety

4-8 Porto (Portugal) TC 176/SC 2 Quality management and quality assur-ance/Quality systems

4-8 Porto (Portugal) TC 176/SC 3 Quality management and quality assur-ance/Supporting technologies

4-8 Bangkok (Thailand)

TC 217 Cosmetics

4-9 Perros-Guirec (France)


4-9 Porto (Portugal) TC 176 Quality management and quality assurance

5 Berlin (Germany) TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives

6 Berlin (Germany) TC 41/SC 1 Pulleys and belts (including veebelts)/Friction

6-8 Paris (France) TC 275 Sludge recovery, recycling, treatment and disposal

7 Vienna (Austria) TC 83/SC 4 Sports and other rec-reational facilities and equipment/Snows-ports equipment

7 Okinawa (Japan) TC 201/SC 1 Surface chemical analysis/Terminology

7 Okinawa (Japan) TC 201/SC 2 Surface chemical analysis/General procedures

7 Okinawa (Japan) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy

7-9 Okinawa (Japan) TC 201 Surface chemical analysis

8 Delft (Netherlands)

TC 92/SC 1 Fire safety/Fire initia-tion and growth

8 Shenzen (China) TC 160 Glass in building

8 Shenzen (China) TC 160/SC 1 Glass in build-ing/Product considerations

8 Shenzen (China) TC 160/SC 2 Glass in building/Use considerations

8 Okinawa (Japan) TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment

8 Okinawa (Japan) TC 201/SC 4 Surface chemi-cal analysis/Depth profiling

8 Okinawa (Japan) TC 201/SC 7 Surface chemical analysis/Electron spectroscopies


8 Washington, D.C (USA)

TC 227 Springs

9 Okinawa (Japan) TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy

11 Mexico City (Mexico)

TC 113/SC 1 Hydrometry/Velocity area methods

11-15 Mexico City (Mexico)

TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

11-15 Tokyo (Japan) TC 98 Bases for design of structures

11-15 Mexico City (Mexico)

TC 113 Hydrometry

12-13 Guangzhou (China)

TC 137 Footwear sizing des-ignations and marking systems

13 Tokyo (Japan) TC 110/SC 1 Industrial trucks/Gen-eral terminology


TC 113/SC 2 Hydrometry/Flow measurement structures

14 Tokyo (Japan) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks


TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management


TC 113/SC 6 Hydrometry/Sediment transport

14-15 Redlands (USA) TC 211 Geographic in-formation/Geomatics

15 Tokyo (Japan) TC 110 Industrial trucks


TC 113/SC 8 Hydrometry/Ground water

15 Belo Horizonte (Brazil)


18 Berlin (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems

18 Mumbai (India) TC 135/SC 8 Non-destructive test-ing/Infrared thermog-raphy for non-de-structive testing

18-20 Berlin (Germany) TC 20 Aircraft and space vehicles

18-21 Exton (USA) TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters

19-20 Tokyo (Japan) * TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

19-21 Singapore (Singapore)

TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

20-22 Tokyo (Japan) * TC 269 Railway applications

27 Milan (Italy) TC 221 Geosynthetics

30 Miami (USA) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

December 2013

4-5 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities

4-5 La Plaine St-Denis (France)

* TC 279 Innovation process: interaction, tools and methods

5 Brussels (Belgium)

TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection

5-6 Paris (France) * TC 197 Hydrogen technologies

9-11 Montreux (Switzerland)

PC 284 Management system for quality of private security company (PSC) operations - Requirements with guidance

10 St. Hubert, Que-bec (Canada)

TC 20/SC 13 Aircraft and space vehicles/Space data and information trans-fer systems

11 Berlin (Germany) TC 35/SC 12 Paints and varnishes/Preparation of steel substrates before ap-plication of paints and related products

11 Frankfurt (Germany)

TC 270 Plastics and rubber machines

11-12 Kyoto (Japan) TC 281 Fine Bubble Technology

12-13 New York (USA) TC 171/SC 2 Document manage-ment applications/Application issues

12-13 Berlin (Germany) * TC 276 Biotechnology

16-20 Winterthur (Switzerland)

TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment

January 2014

12-17 Cape Town (South Africa)

TC 223 Societal security

13-16 New Delhi (India) * TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management

15-16 Geneva (Switzerland)

CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

23 Paris (France) TC 17/SC 3 Steel/Steels for struc-tural purposes

23-24 Tokyo (Japan) TC 282 Water re-use

28-31 Sydney (Australia)

* TC 71 Concrete, reinforced concrete and pre-stressed concrete

30-31 Berlin (Germany) TC 12 Quantities and units

February 2014

3-5 St. Peters-burg (Russian Federation)

TC 172/SC 4 Optics and photonics/Telescopic systems

10-11 Paris (France) * TC 44/SC 3 Welding and allied processes/Welding consumables

10-14 Paris (France) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders


10-14 Nairobi (Kenya) * TC 285 Clean cookstoves and clean cooking solutions

12 Milan (Italy) TC 120/SC 3 Leather/Leather products

12-14 Milan (Italy) TC 120 Leather

13 Milan (Italy) TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts

14 Milan (Italy) TC 120/SC 2 Leather/Tanned leather

19 Geneva (Switzerland)

President's committee


19-20 London (United Kingdom)

* PC 286 Collaborative business relation-ship management -- Framework

20-21 Milan (Italy) PC 280 Management Consultancy

21 Berlin (Germany) TC 170 Surgical instruments

21 Stockholm (Sweden)

* TC 213 Dimensional and geometrical product specifications and verification

25-28 Foz do Iguacu (Brazil)

PC 277 Sustainable purchasing

26-27 Guilin (China) * TMB Technical Manage-ment Board

26-28 Kuala Lumpur (Malaysia)

* PC 273 Customer contact centres

(South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces

March 2014

6 Virtual (Unknown)

* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

10-14 (Brazil) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing


TC 118 Compressors and pneumatic tools, ma-chines and equipment


* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines


* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems

13 London (United Kingdom)

* TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors


* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air treatment technology


* President's committee



* COUNCIL Council

23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

24-27 Warsaw (Poland) TC 107 Metallic and other inorganic coatings

25 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

25 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

25 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

(Europe) ** TC 134 Fertilizers and soil conditioners

Paris (France) ** TC 274 Light and lighting

March-April 2014

31-4 (Australia) ** TC 198 Sterilization of health care products

1st Quarter 2014

(India) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

(Netherlands) ** TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions

April 2014

1 Toronto (Canada) TC 117 Fans

7-10 Vitoria (Brazil) TC 102 Iron ore and direct reduced iron

7-11 Delft (Netherlands)

* TC 6 Paper, board and pulps


* TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

7-11 Lund (Sweden) * TC 92 Fire safety

7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks

7-11 Amsterdam (Netherlands)

* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

8-9 (Japan) ** TC 199 Safety of machinery

8-10 (Brazil) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

8-10 Vitoria (Brazil) * TC 102/SC 1 Iron ore and direct re-duced iron/Sampling

8-10 Vitoria (Brazil) * TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis


8-10 Vitoria (Brazil) * TC 102/SC 3 Iron ore and direct reduced iron/Physical testing

9-11 Jeju (Korea, Republic of)

* TC 112 Vacuum technology

14-15 Hong Kong (Hong Kong, China)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

23-24 (Europe) ** TC 167 Steel and aluminium structures


** TC 34 Food products

Berlin (Germany) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

Tianjin (China) ** TC 219 Floor coverings

May 2014

5-9 Washington, D.C (USA)

* TC 46 Information and documentation


* TC 46/SC 9 Information and documentation/Identification and description


* TC 46/SC 11 Information and doc-umentation/Archives/records management

5-10 St. Petersburg, Florida (USA)

* TC 96 Cranes

8 Santa María de Lamas (Portugal)

** TC 87 Cork

8 Wiesbaden (Germany)

* TC 226 Materials for the production of primary aluminium


* TC 10 Technical product documentation


* TC 10/SC 1 Technical product documentation/Basic conventions


* TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

12-16 Milan (Italy) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools


TC 68/SC 4 Financial services/Securities and related financial instruments

12-16 Zhangjiajie (China)

** TC 195 Building construc-tion machinery and equipment

12-16 Zhangjiajie (China)

** TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work


* COPOLCO Committee on con-sumer policy

14-16 Rosslyn (USA) ** TC 145 Graphical symbols

14-16 Rosslyn (USA) ** TC 145/SC 1 Graphical symbols/Public information symbols

14-16 Rosslyn (USA) ** TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours

14-16 Rosslyn (USA) ** TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment


TC 68 Financial services

15 West Consho-hocken (Phila-delphia) (USA)

* TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)

15-20 Berlin (Germany) * TC 34/SC 5 Food products/Milk and milk products

16 West Consho-hocken (Phila-delphia) (USA)

* TC 119 Powder metallurgy

19-23 Milan (Italy) * TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment

19-23 Berlin (Germany) ** TC 43 Acoustics

19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise

19-23 Berlin (Germany) ** TC 43/SC 2 Acoustics/Building acoustics

19-23 Karuizawa (Japan)


20-21 Prague (Czech Republic)

* TC 122 Packaging

21-22 (USA) ** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment

23 Toronto (Canada) * TC 268 Sustainable develop-ment in communities

23-24 Beijing (China) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

26-29 Kyoto (Japan) * TC 249 Traditional chinese medicine

26-30 Tokyo (Japan) ** TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

26-30 Treviso (Italy) * TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

26-30 Panama (Panama)

* TC 207 Environmental management

27-30 (USA) ** TC 156 Corrosion of metals and alloys

June 2014

1-6 (Sweden) ** TC 127 Earth-moving machinery


* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)


* TC 43/SC 3 Acoustics/Underwa-ter acoustics

2-6 Moscow (Rus-sian Federation)

* TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection


2-6 Berlin (Germany) TC 211 Geographic in-formation/Geomatics

3 Moscow (Rus-sian Federation)

* TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection


* TMB Technical Manage-ment Board

16-20 Incheon (Korea, Republic of)

* TC 121 Anaesthetic and res-piratory equipment

16-20 Baltimore (USA) * TC 188 Small craft

17-18 Stockholm (Sweden)

* TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

17-18 Berlin (Germany) * TC 220 Cryogenic vessels


** TC 34/SC 9 Food products/Microbiology


* TC 193 Natural gas

25-26 Paris (France) * TC 91 Surface active agents

Düsseldorf (Germany)

** TC 17/SC 17 Steel/Steel wire rod and wire products

London (United Kingdom)

** TC 193/SC 1 Natural gas/Analysis of natural gas

July 2014




7-11 Vienna (Austria) ** PC 271 Compliance manage-ment systems

8-11 Boulder (USA) * REMCO Committee on refer-ence materials

September 2014

2-4 Research Trian-gle Park (USA)

* TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

3-5 Berlin (Germany) ** TC 202 Microbeam analysis

3-5 Berlin (Germany) ** TC 202/SC 1 Microbeam analysis/Terminology

3-5 Berlin (Germany) ** TC 202/SC 2 Microbeam analy-sis/Electron probe microanalysis

3-5 Berlin (Germany) ** TC 202/SC 3 Microbeam analysis/Analytical electron microscopy

3-5 Berlin (Germany) ** TC 202/SC 4 Microbeam analysis/Scanning electron microscopy (SEM)

7 Rio de Janeiro (Brazil)

* President's committee


8-9 Rio de Janeiro (Brazil)

* DEVCO Committee on devel-oping country matters

8-9 Madrid (Spain) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces


* TMB Technical Manage-ment Board

8-12 Paris (France) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

9-19 Paris (France) * TC 213 Dimensional and geometrical product specifications and verification


* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)


* GA General Assembly


* COUNCIL Council

15-19 Seoul (Korea, Republic of)

** TC 150 Implants for surgery

15-19 Wuxi (China) * TC 163 Thermal performance and energy use in the built environment

15-19 Wuxi (China) * TC 205 Building environment design


* TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

18-19 Manches-ter (United Kingdom)

** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

21 Amsterdam (Netherlands)

* TC 254 Safety of amusement rides and amusement devices

22-26 Honolulu, Hawaii (USA)

** TC 61/SC 10 Plastics/Cellular plastics

22-26 Durban (South Africa)

** TC 146 Air quality


** TC 146/SC 1 Air quality/Stationary source emissions


** TC 146/SC 6 Air quality/Indoor air


* CASCO Committee on con-formity assessment

25 Chicago (USA) * TC 79/SC 11 Light metals and their alloys/Titanium

Stockholm (Sweden)

** TC 17/SC 11 Steel/Steel castings

Sydney (Australia)

** TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines

Seattle (USA) ** TC 89 Wood-based panels

3rd Quarter 2014

London (United Kingdom)

** TC 48 Laboratory equipment

2nd-3rd Quarter 2014

Ljimuden (Netherlands)

** TC 17/SC 9 Steel/Tinplate and blackplate

October 2014

5-10 Berlin (Germany) TC 215 Health informatics

14-16 Suzhou (China) * TC 164/SC 5 Mechanical testing of metals/Fatigue testing


15 Suzhou (China) * TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

15-16 Suzhou (China) * TC 164/SC 2 Mechanical testing of metals/Ductility testing

16 Suzhou (China) * TC 164/SC 3 Mechanical testing of metals/Hardness testing

16-17 (Czech Republic) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings

17 Suzhou (China) * TC 164/SC 1 Mechanical testing of metals/Uniaxial testing

20-24 Nunspeet (Netherlands)

TC 149/SC 1 Cycles/Cycles and major sub-assemblies

20-24 Berlin (Germany) * TC 190 Soil quality

20-24 Berlin (Germany) * TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

20-24 Berlin (Germany) * TC 190/SC 2 Soil quality/Sampling

20-24 Berlin (Germany) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

20-24 Berlin (Germany) * TC 190/SC 4 Soil quality/Biological methods

20-24 Berlin (Germany) * TC 190/SC 5 Soil quality/Physical methods

20-24 Berlin (Germany) * TC 190/SC 7 Soil quality/Soil and site assessment

22-23 Tokyo (Japan) * TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

23-24 (South Africa) ** TC 178 Lifts, escalators and moving walks

27-31 Berlin (Germany) * TC 264 Fireworks

29 (Europe) ** TC 79 Light metals and their alloys

Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables

Toronto (Canada) ** TC 59 Buildings and civil engineering works

(Canada) ** TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction

Toronto (Canada) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works

Tokyo (Japan) ** TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

Prague (Czech Republic)

** TC 135 Non-destructive testing

Paris (France) ** TC 218 Timber

November 2014

3-7 Cape Town (South Africa)

** TC 45 Rubber and rubber products

4th Quarter 2014

(Portugal) ** TC 34/SC 4 Food products/Cere-als and pulses

2nd Semester 2014

Madrid (Spain) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

Month unknown 2014

(Australia) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

(Brazil) ** TC 28 Petroleum products and lubricants

Beijing (China) ** TC 36 Cinematography

(Germany) ** TC 37 Terminology and other language and content resources

(Japan) ** TC 44 Welding and allied processes

Nairobi (Kenya) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

Seoul (Korea, Republic of)

** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

(United Kingdom)

** TC 142 Cleaning equipment for air and other gases

February 2015


* TC 213 Dimensional and geometrical product specifications and verification

St. Petersburg, Florida (USA)

** TC 115 Pumps

March 2015


* COUNCIL Council

1st Quarter 2015

Foshan (China) ** TC 107 Metallic and other inorganic coatings

Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

April 2015

24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

25 Atlanta (USA) ** TC 6 Paper, board and pulps

(France) ** TC 29 Small tools


(France) ** TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials

(USA) ** TC 34/SC 15 Food products/Coffee

Tienjin (China) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

(Europe) ** TC 215 Health informatics

May 2015


** TC 4 Rolling bearings

June 2015

22-26 Göteborg (Sweden)

* TC 188 Small craft

Beijing (China) ** TC 46 Information and documentation

2nd Quarter 2015

(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

September 2015

14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification

16-18 Seoul (Korea, Republic of)

* GA General Assembly

19 Seoul (Korea, Republic of)

* COUNCIL Council

Vienna (Austria) ** TC 33 Refractories

3rd Quarter 2015

Sao Paulo (Brazil)

** TC 215 Health informatics

2nd-3rd Quarter 2015

(Europe) ** TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests

October 2015

Nairobi (Kenya) ** TC 38 Textiles

Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns

Nairobi (Kenya) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

Sao Paulo (Brazil)

** TC 58/SC 2 Gas cylinders/Cylin-der fittings

November 2015

(China) ** JTC 1 Information technology

2nd Semester 2015

(Europe) ** TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco

Month unknown 2015

(South Africa) ** REMCO Committee on refer-ence materials

(Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products

(USA) ** TC 27 Solid mineral fuels

(Finland) ** TC 44 Welding and allied processes

(France) ** TC 45 Rubber and rubber products

(Russian Federation)

** TC 96 Cranes

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom)

** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

(China) ** TC 274 Light and lighting

February 2016

(USA) ** TC 213 Dimensional and geometrical product specifications and verification

April 2016

Seoul (Korea, Republic of)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

(Australia) ** TC 178 Lifts, escalators and moving walks

November 2016

(Norway) ** JTC 1 Information technology

Month unknown 2016

(Russian Federation)

** REMCO Committee on refer-ence materials

(Australia) ** TC 44 Welding and allied processes

(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

Documents

ISO Update · ISO Update, Supplement to ISO ... ISO/CD 19281 Air cargo — Fire resistant containers — Design, ... for design conformance testing, quality con-