ISO Update - International Organization for … · ISO Update, Supplement to ISO Focus -- November 2016 3. ISO/DIS 11783-6 * Tractors and machinery for agriculture and forestry —

ISO Update Supplement to ISOfocus

November 2016

ISO Update, Supplement to ISO Focus -- November 2016 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 October to 31 October 2016

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 6 Paper, board and pulps

ISO/CD 7263-1 Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 1: A-flute

ISO/CD 7263-2 Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 2: B-flute

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 24347 Agricultural vehicles — Mechanical connec-tions between towed and towing vehicles — Dimensions of ball-type coupling device (80 mm)

ISO/CD 10517 Powered hand-held hedge trimmers — Safety

TC 28 Petroleum products and related prod-ucts of synthetic or biological origin

ISO/CD 21493 Petroleum products and hydrocarbon solvents — Determination of aniline point equivalent

TC 31 Tyres, rims and valves

ISO/CD 4250-3 Earth-mover tyres and rims — Part 3: Rims

TC 34 Food products

ISO/CD 20636 Fortified milk powders, infant formula and adult nutritionals — Determination of vitamin D by liquid chromatography-mass spectrometry

ISO/CD 21446 Infant formula and adult nutritionals — Deter-mination of trans vitamin K1 content by normal phase high performance liquid chromatography (HPLC)

TC 38 Textiles

ISO/CD 20852 Textiles — Determination of the total heat transfer through textiles in simulated environments

ISO/CD 3175-4 Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 4: Procedure for testing performance when clean-ing and finishing using simulated wetcleaning

TC 46 Information and documentation

ISO/DTR 19815

Information and documentation — Manage-ment of the environmental conditions for archive and library holdings

TC 61 Plastics

ISO/CD 21844 Cellular plastics — Cellulose foam thermal insulation material- Specifications

ISO/CD 21760-1

Adhesives for organic electronic devices — De-termination of water vapour transmission rate — Part 1: Adhesive film preparation method

ISO/CD 21760-2

Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 2: Edge seal method

TC 84 Devices for administration of medicinal products and catheters

ISO/CD 7886-4 Sterile hypodermic syringes for single use — Part 4: Syringes with re-use prevention feature

ISO/CD 20069 Device change management of combina-tion products for administration of medicinal products

TC 86 Refrigeration and air-conditioning

ISO/CD 18326 Single-duct portable airconditioners and heat pumps — Testing and rating for performance

TC 94 Personal safety -- Protective clothing and equipment

ISO/DIS 16900-2

Respiratory protective devices — Methods of test and test equipment — Part 2: Determina-tion of breathing resistance

TC 107 Metallic and other inorganic coatings

ISO/CD 21164 Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engi-neering purposes — Measurement of coating adhesion

TC 117 Fans

ISO/CD 12759-2

Fans — Efficiency classification for fans — Part 2: Part load determination

TC 126 Tobacco and tobacco products

ISO/CD 21766 Tobacco and tobacco products — Determi-nation of tobacco-specific nitrosamines in tobacco products — Method using LC-MS/MS

TC 127 Earth-moving machinery

ISO/CD 10968 Earth-moving machinery — Operator's controls

TC 146 Air quality

ISO/CD 17735 Workplace atmospheres — Determination of total isocyanate groups in air using 1-(9-an-thracenylmethyl)piperazine (MAP) reagent and liquid chromatography

ISO/CD 21832 Workplace air — Procedures for determination of metals and metalloids in airborne particles

TC 163 Thermal performance and energy use in the built environment

ISO/DTR 17772-2

Energy performance of buildings — Overall Energy performance Assessment Procedures — Part 2: Guideline for using indoor environ-mental input parameters for the design and assessment of energy performance of buildings

TC 189 Ceramic tile

ISO/CD 10545-2

Ceramic tiles — Part 2: Determination of di-mensions and surface quality

TC 202 Microbeam analysis

2 ISO Update, Supplement to ISO Focus -- November 2016

ISO/CD 20171 Tag image file format for Scanning electron microscopy(TIFF/SEM)

TC 206 Fine ceramics

ISO/CD 19622 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for piezo-electric constant d33 of piezoelectric ceramics by direct quasi-static method

TC 207 Environmental management

ISO/CD 14080 Greenhouse gases management and related activities — Framework and principles for methodologies on climate actions

TC 213 Dimensional and geometrical product specifications and verification

ISO/DTS 21619

Geometrical product specifications (GPS) — Types of documents with GPS specifications

TC 216 Footwear

ISO/CD 20535 Footwear — Test methods for insoles — Di-mensional variation

TC 219 Floor coverings

ISO/CD 23999 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat

TC 220 Cryogenic vessels

ISO/CD 20421-1

Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing

TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

ISO/CD TR 24514

Activities relating to drinking water and waste-water services --Examples of use of perfor-mance indicators using ISO 24510, 24511 and 24512 standards and related methodologies

TC 258 Project, programme and portfolio management

ISO/CD 21508 Earned value management

ISO/CD 21511 Work breakdown structure (WBS)

TC 268 Sustainable cities and communities

ISO/CD 37157 Smart community infrastructures — Smart transportation for compact cities

TC 292 Security and resilience

ISO/CD 19564 Security and resilience — Product fraud coun-termeasures and control — General principles

ISO/CD 20229 Security and resilience — GuideIines for estab-lishing interoperability among object identifica-tion systems to deter counterfeiting and illicit trade

CASCO Committee on conformity assessment

ISO/IEC DTR 17028

Conformity assessment — Example of a certifi-cation scheme for services

JTC 1 Information technology

ISO/IEC CD 30140-3

Underwater acoustic sensor network — Part 3: Entities and interface

ISO/IEC CD 30140-4

Underwater acoustic sensor network — Part 4: Interoperability

ISO/IEC CD 14543-5-11

Information technology — Home electronic systems (HES) architecture — Part 5-11: Intelli-gent grouping and resource sharing — Remote user interface

ISO/IEC CD 14543-5-12

Information technology — Home electronic systems (HES) architecture — Part 5-12: Intelli-gent grouping and resource sharing — Remote access test and verification

ISO/IEC CD 14543-5-101

Information technology — Home electronic systems (HES) architecture — Part 5-101: Intel-ligent grouping and resource sharing remote AV access profile

ISO/IEC CD 20248

Automatic identification and data capture tech-niques — Data structures — Digital Signature meta structure

ISO/IEC CD 20071-23

Information technology — User interface component accessibility — Part 23: Guidance on the visual presentation of audio information (including captions and subtitles)

ISO/IEC CD 24752-8

Information technology — User interfaces — Universal remote — Part 8: User interface resource framework

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

IIW International Institute of Welding

ISO/DIS 14271 * Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds

2017-01-17

(Revision of ISO 14271:2011, ISO 14271:2011/Cor 1:2012)

TC 12 Quantities and units

ISO/DIS 80000-4

* Quantities and units — Part 4: Mechanics

2017-01-13

(Revision of ISO 80000-4:2006)

TC 22 Road vehicles

ISO 17949:2013/DAmd 1

* Impact test procedures for road vehicles — Seating and position-ing procedures for anthropomor-phic test devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions — Amendment 1

2017-01-06

ISO 2575:2010/DAmd 6

* Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 6

2017-01-13

ISO 2575:2010/DAmd 7

* Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 7

2017-01-13



ISO/DIS 11783-6

* Tractors and machinery for agriculture and forestry — Se-rial control and communications data network — Part 6: Virtual terminal

2017-01-02


TC 27 Solid mineral fuels

ISO/DIS 7404-4

* Methods for the petrographic analysis of coals — Part 4: Method of determining micro-lithotype, carbominerite and minerite composition

2016-12-27


TC 28 Petroleum products and re-lated products of synthetic or biological origin

ISO/DIS 5165 * Petroleum products — Deter-mination of the ignition quality of diesel fuels — Cetane engine method

2016-12-27

(Revision of ISO 5165:1998)

TC 37 Terminology and other language and content resources

ISO/DIS 18841 * Interpreting services — General requirements and recommendations

2017-01-18

ISO/DIS 20108 * Simultaneous interpreting — Quality and transmission of sound and image input - Requirements

2017-01-13

ISO/DIS 20228 * Legal interpreting

2017-01-18

TC 39 Machine tools

ISO/DIS 3875.2

* Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy

2016-12-02


TC 44 Welding and allied processes

ISO/DIS 13918 * Welding — Studs and ceramic ferrules for arc stud welding

2017-01-04


ISO/DIS 14731 * Welding coordination — Tasks and responsibilities

2016-12-27


TC 45 Rubber and rubber products

ISO 23233:2016/DAmd 1

* Rubber, vulcanized or ther-moplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc — Amendment 1

2016-12-28

ISO/DIS 32100 * Rubber- or plastics-coated fabrics — Physical and mechani-cal tests — Determination of flex resistance by the flexometer method

2017-01-10


TC 58 Gas cylinders

ISO/DIS 18119.2

* Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Peri-odic inspection and testing

2016-12-19

(Revision of ISO 6406:2005, ISO 10461:2005, ISO 10461:2005/Amd 1:2006)

TC 59 Buildings and civil engi-neering works

ISO/DIS 6707-1

* Buildings and civil engineering works — Vocabulary — Part 1: General terms


ISO/DIS 6707-2

* Buildings and civil engineering works — Vocabulary — Part 2: Communication and contract terms


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 18796-1

* Petroleum, petrochemicals and natural gas industries — Internal coating and lining of carbon steel process vessels — Part 1: Technical requirements

ISO/DIS 35103 * Petroleum and natural gas industries — Arctic operations — Environmental monitoring

2016-12-29

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use

ISO/DIS 6710 * Single-use containers for venous blood specimen collection

2017-01-11


ISO/DIS 15378 * Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)

2016-12-27


TC 108 Mechanical vibration, shock and condition monitoring

ISO/DIS 16079-1

* Condition monitoring and diag-nostics of wind turbines — Part 1: General guidelines

2016-12-30

TC 118 Compressors and pneu-matic tools, machines and equipment

ISO/DIS 8573-2

* Compressed air — Contaminant measurement — Part 2: Oil aero-sol content

2017-01-09


TC 120 Leather

ISO/DIS 15115 * Leather — Vocabulary

2017-01-05

TC 121 Anaesthetic and respiratory equipment


ISO/DIS 80601-2-61

* Medical electrical equipment — Part 2-61: Particular require-ments for basic safety and essential performance of pulse oximeter equipment

2017-01-16

(Revision of ISO 80601-2-61:2011)

ISO 10079-1:2015/DAmd 1

* Medical suction equipment — Part 1: Electrically powered suc-tion equipment — Amendment 1: Changes to requirements for operating at extremes of temperature

2016-12-22

TC 122 Packaging

ISO/DIS 19809 * Packaging — Accessible design — Information and marking

2017-01-12

TC 134 Fertilizers and soil conditioners

ISO/DIS 7409 * Fertilizers — Marking — Presen-tation and declarations

2017-01-04


TC 135 Non-destructive testing

ISO/DIS 19835 * Non-destructive testing — Acoustic emission testing — Steel structures of overhead travelling cranes and portal bridge cranes

2017-01-04

TC 145 Graphical symbols

ISO/DIS 16069 * Graphical symbols — Safety signs — Safety way guidance systems (SWGS)

2017-01-18


TC 154 Processes, data ele-ments and documents in commerce, industry and administration

ISO/DIS 14533-3

* Processes, data elements and documents in commerce, indus-try and administration — Long term signature profiles — Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)

2016-12-28

TC 156 Corrosion of metals and alloys

ISO/DIS 19280 * Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crev-ice geometries in ferric chloride solution

2017-01-12

TC 172 Optics and photonics

ISO/DIS 8596 * Ophthalmic optics — Visual acuity testing — Standard and clinical optotypes and their presentation

2017-01-05


TC 182 Geotechnics

ISO/DIS 22477-4

* Geotechnical investigation and testing — Testing of geotechni-cal structures — Part 4: Testing of piles dynamic load testing

2017-01-13

TC 190 Soil quality

ISO/DIS 18400-104

* Soil quality — Sampling — Part 104: Strategies

2016-12-29

(Revision of ISO 10381-8:2006, ISO 10381-1:2002, ISO 10381-5:2005, ISO 10381-6:2009)


ISO/DIS 19463 * Microbeam analysis — Electron probe microanalyser (EPMA) — Guidelines for performing quality assurance procedures

2017-01-03

TC 204 Intelligent transport systems

ISO/DIS 16461 * Intelligent transport systems — Criteria for privacy and integrity protection

2016-12-27

TC 209 Cleanrooms and associat-ed controlled environments

ISO/DIS 14644-12

* Cleanrooms and associated con-trolled environments — Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration

2017-01-19

TC 211 Geographic information/Geomatics

ISO/DIS 19127 * Geographic information — Geo-detic register

2017-01-06

(Revision of ISO/TS 19127:2005)

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/DIS 20170 * Geometrical product specifica-tions (GPS) — Decomposition of geometrical characteristics for manufacturing control

2016-12-27

TC 221 Geosynthetics

ISO/DIS 13426-1

* Geotextiles and geotextiles-related products — Strength of internal structural junctions — Part 1: Geocells

2017-01-04


TC 249 Traditional chinese medicine

ISO/DIS 20333.2

* Traditional Chinese medicine — Coding rules for chinese medicines in supply chain management

2016-11-29

TC 255 Biogas

ISO/DIS 20675 * Biogas — Biogas production, conditioning, upgrading and utilization — Terms, definitions and classification scheme

2017-01-19

TC 261 Additive manufacturing

ISO/ASTM DIS 52901.2

* Additive manufacturing — Gen-eral principles — Requirements for purchased AM parts

2016-12-19


ISO/DIS 37154 * Smart community infrastructures — Best practice guidelines for transportation

2016-12-27

TC 281 Fine Bubble Technology


ISO/DIS 20480-1

* Fine bubble technology - Gen-eral principles for usage and measurement of fine bubbles — Part 1: Terminology

2017-01-17


ISO/IEC 14651:2016/DAmd 1

* Information technology — In-ternational string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering — Amendment 1

2017-01-13

ISO/IEC DIS 19770-1

* Information technology — IT asset management — Part 1: IT asset management systems — Requirements

2016-12-30

(Revision of ISO/IEC 19770-1:2012)

ISO/IEC DIS 19770-4

* Information technology — IT as-set management — Part 4: Re-source utilization measurement

2017-01-13

ISO/IEC DIS 16963

* Information technology — Digi-tally recorded media for informa-tion interchange and storage — Test method for the estimation of lifetime of optical disks for long-term data storage

2017-01-02

(Revision of ISO/IEC 16963:2015)

ISO/IEC DIS 29121

* Information technology — Digi-tally recorded media for informa-tion interchange and storage — Data migration method for optical disks for long-term data storage

2017-01-04


ISO/IEC DIS 14543-5-8

* Information technology — Home electronic systems (HES) archi-tecture — Part 5-8: Intelligent grouping and resource sharing for Class 2 and Class 3 — Re-mote access core protocol

2017-01-13

ISO/IEC DIS 14543-5-9

* Information technology — Home electronic systems (HES) archi-tecture — Part 5-9: Intelligent grouping and resource sharing for class 2 and class 3 — Re-mote access service platform

2017-01-13

ISO/IEC DIS 10118-3

* Information technologies — Security techniques — Hash-functions — Part 3: Dedicated hash-functions

2017-01-13


ISO/IEC 14496-10:2014/DAmd 4

* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 4: Progressive high 10 profile and additional VUI code points and supplemental enhancement information

2017-01-04

ISO/IEC 23000-13/DAmd 1

* Information technology - Mul-timedia application format (MPEG-A) — Part 13: Aug-mented reality application format — Amendment 1: Reference software and conformance for ARAF

2017-01-13

ISO/IEC 23001-8:2016/DAmd 1

* Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 1: Ad-ditional code points for colour description

2017-01-10

ISO/IEC 23003-4:2015/DAmd 2

* Information technology — MPEG audio technologies — Part 4: Dy-namic Range Control — Amend-ment 2: Reference software

2017-01-04

ISO/IEC 23008-12/DAmd 1

* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 12: Image file format — Amendment 1: Sup-port for AVC, JPEG and layered coding of images

2017-01-04

ISO/IEC DIS 20382-1

* Information technology — User interfaces — Face-to-face speech translation — Part 1: User interface

2017-01-06

ISO/IEC DIS 20382-2

* Information technology — User interface — Face-to-face speech translation — Part 2: System architecture and functional components

2017-01-06

ISO/IEC DIS 30107-2

* Information technology — Bio-metric presentation attack detec-tion — Part 2: Data formats

2017-01-04

ISO/IEC DIS 30107-3

* Information technology — Biometric presentation attack detection — Part 3: Testing and reporting

2017-01-05

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 24 Particle characterization including sieving

ISO/FDIS 22412

* Particle size analysis — Dynamic light scattering (DLS)

2016-12-06

(Revision of ISO 13321:1996, ISO 22412:2008)

TC 29 Small tools

ISO/FDIS 6789-1

* Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for certificates of conformance

2016-12-13



ISO/FDIS 6789-2

* Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainly

2016-12-13


TC 34 Food products

ISO/FDIS 6579-1.2

* Microbiology of the food chain — Horizontal method for the detection, enumeration and se-rotyping of Salmonella — Part 1: Detection of Salmonella spp.

(Revision of ISO 6579:2002, ISO 6579:2002/Cor 1:2004, ISO 6579:2002/Amd 1:2007)

ISO/FDIS 6887-1

* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 1: General rules for the preparation of the initial suspension and decimal dilutions

2016-12-13


ISO/FDIS 6887-2

* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 2: Specific rules for the preparation of meat and meat products

2016-12-13


ISO/FDIS 6887-3

* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 3: Specific rules for the preparation of fish and fishery products

2016-12-13


ISO/FDIS 6887-4

* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 4: Specific rules for the preparation of mis-cellaneous products

2016-12-13

(Revision of ISO 6887-4:2003, ISO 6887-4:2003/Cor 1:2004, ISO 6887-4:2003/Amd 1:2011)

ISO/FDIS 663 * Animal and vegetable fats and oils — Determination of insoluble impurities content

2017-01-06


ISO/FDIS 3960 * Animal and vegetable fats and oils — Determination of peroxide value — Iodometric (visual) end-point determination

2017-01-06


ISO/FDIS 6883 * Animal and vegetable fats and oils — Determination of con-ventional mass per volume (litre weight in air)

2017-01-06


ISO/FDIS 8534 * Animal and vegetable fats and oils — Determination of water content — Karl Fischer method (pyridine free)

2017-01-06


ISO/FDIS 15774

* Animal and vegetable fats and oils — Determination of cad-mium content by direct graphite furnace atomic absorption spectrometry

2017-01-12


TC 42 Photography

ISO/FDIS 12233

* Photography — Electronic still picture imaging — Resolution and spatial frequency responses

2016-12-20


TC 43 Acoustics

ISO/FDIS 7029 * Acoustics — Statistical distribu-tion of hearing thresholds related to age and gender

2016-12-13


ISO/FDIS 11819-2

* Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method

2016-12-16


ISO/FDIS 9013 * Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances

2016-11-30


TC 54 Essential oils

ISO/FDIS 4730 * Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)

2016-12-07


TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/FDIS 16639

* Surveillance of the activity con-centrations of airborne radioac-tive substances in the workplace of nuclear facilities

2016-12-12

ISO/FDIS 18310-1

* Measurement and prediction of the ambient dose equivalent from patients receiving iodine 131 administration after thyroid ablation — Part 1: During the hospitalization

2016-12-11

TC 107 Metallic and other inorgan-ic coatings

ISO/FDIS 8401 * Metallic coatings — Review of methods of measurement of ductility

2017-01-05



ISO/FDIS 8643 * Earth-moving machinery — Hy-draulic excavator and backhoe loader lowering control device — Requirements and tests

2016-12-19


TC 130 Graphic technology

ISO/FDIS 19594

* Graphic technology — Test method for the determination of the binding strength for perfect-bound products — Page-pull test working upwards

2016-12-06

TC 135 Non-destructive testing


ISO/FDIS 16946

* Non-destructive testing — Ultra-sonic testing — Specification for step wedge calibration block

2017-01-03


ISO/FDIS 10880

* Non-destructive testing — In-frared thermographic testing — General principles

2016-12-07

ISO/FDIS 18251-1

* Non-destructive testing — In-frared thermography — Part 1: Characteristics of system and equipment

2016-12-07

TC 136 Furniture

ISO/FDIS 24496

* Office furniture — Office chairs — Methods for the determination of dimensions

2016-12-13

(Revision of ISO/TR 24496:2012)

TC 163 Thermal performance and energy use in the built environment

ISO/FDIS 17772-1

* Energy performance of buildings — Indoor environmental Quality — Part 1: Indoor environmental input parameters for the design and assessment of energy per-formance of buildings

ISO/FDIS 52000-1

* Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures

(Revision of ISO/TR 16344:2012, ISO 16346:2013)

ISO/FDIS 52003-1

* Energy performance of build-ings — Indicators, requirements, ratings and certificates — Part 1: General aspects and ap-plication to the overall energy performance


ISO/FDIS 6946 * Building components and build-ing elements — Thermal resist-ance and thermal transmittance — Calculation methods


ISO/FDIS 10077-1

* Thermal performance of win-dows, doors and shutters — Cal-culation of thermal transmittance — Part 1: General

(Revision of ISO 10077-1:2006, ISO 10077-1:2006/Cor 1:2009)

ISO/FDIS 10077-2

* Thermal performance of win-dows, doors and shutters — Cal-culation of thermal transmittance — Part 2: Numerical method for frames

(Revision of ISO 10077-2:2012, ISO 10077-2:2012/Cor 1:2012)

ISO/FDIS 10211

* Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations


ISO/FDIS 12631

* Thermal performance of curtain walling — Calculation of thermal transmittance


ISO/FDIS 13370

* Thermal performance of build-ings — Heat transfer via the ground — Calculation methods


ISO/FDIS 13786

* Thermal performance of building components — Dynamic thermal characteristics — Calculation methods


ISO/FDIS 13789

* Thermal performance of build-ings — Transmission and ventila-tion heat transfer coefficients — Calculation method


ISO/FDIS 14683

* Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values


ISO/FDIS 52010-1

* Energy performance of buildings — External climatic conditions — Part 1: Conversion of climatic data for energy calculations

ISO/FDIS 52016-1

* Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent head loads — Part 1: Calculation procedures

ISO/FDIS 52017-1

* Energy performance of build-ings — Sensible and latent heat loads and internal temperatures — Part 1: Generic calculation procedures


ISO/FDIS 52018-1

* Energy performance of build-ings — Indicators for partial EPB requirements related to thermal energy balance and fabric features — Part 1: Overview of options

ISO/FDIS 52022-1

* Energy performance of buildings — Thermal, solar and daylight properties of building compo-nents and elements — Part 1: Simplified calculation method of the solar and daylight character-istics for solar protection devices combined with glazing

ISO/FDIS 52022-3

* Energy performance of buildings — Thermal, solar and daylight properties of building compo-nents and elements — Part 3: Detailed calculation method of the solar and daylight character-istics for solar protection devices combined with glazing

ISO/FDIS 17738-1

* Thermal insulation products — Exterior insulation and finish systems — Part 1: Materials and systems

2016-12-13

TC 164 Mechanical testing of metals

ISO/FDIS 12106

* Metallic materials — Fatigue testing — Axial-strain-controlled method

2016-12-15


TC 190 Soil quality

ISO/FDIS 14869-3

* Soil quality — Dissolution for the determination of total element content — Part 3: Dissolution with hydrofluoric, hydrochloric and nitric acids using pressur-ised microwave technique

2016-12-16

TC 198 Sterilization of health care products


ISO/FDIS 11138-1

* Sterilization of health care prod-ucts — Biological indicators — Part 1: General requirements

2016-12-18


ISO/FDIS 11138-2

* Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes

2016-12-18


ISO/FDIS 11138-3

* Sterilization of health care products — Biological indicators — Part 3: Biological indica-tors for moist heat sterilization processes

2016-12-18


ISO/FDIS 11138-4

* Sterilization of health care prod-ucts — Biological indicators — Part 4: Biological indicators for dry heat sterilization processes

2016-12-18


ISO/FDIS 11138-5

* Sterilization of health care products — Biological indicators — Part 5: Biological indica-tors for low-temperature steam and formaldehyde sterilization processes

2016-12-18


TC 205 Building environment design

ISO/FDIS 16484-5

* Building automation and control systems (BACS) — Part 5: Data communication protocol

2016-11-29



ISO/FDIS 19722

* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of photocatalytic activity on semiconducting pho-tocatalytic materials by dissolved oxygen consumption

2016-12-13

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/FDIS 1938-2

* Geometrical product specifica-tions (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges

2016-11-30

TC 215 Health informatics

ISO/IEEE 11073-10101:2004/FDAmd 1

* Health informatics — Point-of-care medical device communica-tion — Part 10101: Nomencla-ture — Amendment 1: Additional definitions

2017-03-10

ISO/FDIS 21298

* Health informatics — Functional and structural roles

2016-12-19

(Revision of ISO/TS 21298:2008)

TC 249 Traditional chinese medicine

ISO/FDIS 19465

* Traditional Chinese medicine — Categories of traditional Chinese medicine (TCM) clinical termino-logical systems

2016-11-29

ISO/FDIS 19824

* Traditional Chinese medicine — Schisandra chinensis (Turcz.) Baill seeds and seedlings

2016-12-06

ISO/FDIS 20408

* Traditional Chinese medicine — Panax notoginseng seeds and seedlings

2016-12-06

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 2418 * Leather — Chemical, physical and mechanical and fastness tests — Sampling location

2016-12-16


ISO/FDIS 17075-1

* Leather — Chemical determina-tion of chromium(VI) content in leather — Part 1: Colorimetric method

2016-11-29


ISO/FDIS 17075-2

* Leather — Chemical determina-tion of chromium(VI) content in leather — Part 2: Chromato-graphic method

2016-11-29


ISO/FDIS 17232

* Leather — Physical and mechan-ical tests — Determination of heat resistance of patent leather

2016-12-03


ISO/FDIS 17233

* Leather — Physical and me-chanical tests — Determination of cold crack temperature of surface coatings

2016-12-02



ISO/IEC/IEEE FDIS 8802-3

* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 3: Standard for Ethernet

2017-02-25

(Revision of ISO/IEC/IEEE 8802-3:2014)

ISO/IEC FDIS 14776-262

* Information technology — Small computer system interface (SCSI) — Part 262: SAS protocol layer - 2 (SPL-2)

2016-12-10

ISO/IEC FDIS 19798

* Information technology — Office equipment — Method for the determination of toner cartridge yield for colour printers and multi-function devices that con-tain printer components

2016-11-29



* Information technology — Cod-ing of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format

2016-12-09

(Revision of ISO/IEC 14496-15:2014, ISO/IEC 14496-15:2014/CD Cor 1, ISO/IEC 14496-15:2014/Cor 1:2015, ISO/IEC 14496-15:2014/PDAM 1, ISO/IEC 14496-15:2014/PDAM 2)



* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 5: Reference software for high efficiency video coding

2016-11-29

(Revision of ISO/IEC 23008-5:2015, ISO/IEC 23008-5:2015/Amd 1:2016, ISO/IEC 23008-5:2015/Amd 2:2016, ISO/IEC 23008-5:2015/DAmd 3, ISO/IEC 23008-5:2015/DAmd 4)


* Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 5: Server and network assisted DASH (SAND)

2016-12-09


* Information technology — User interfaces — Voice commands — Part 2: Constructing and testing

2016-12-01


* Information technology — User interfaces — Voice commands — Part 3: Translation and localization

2016-12-01


* Information technology — Vo-cabulary — Part 37: Biometrics

2016-12-14



* Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pic-tograms, icons and symbols for use with biometric systems — Part 4: Fingerprint applications

2016-12-01

Standards published

New International Standards published between 01 October and 31 October 2016


** French version of standard previously published in English only

Price

group

PC 278 Anti-bribery management systems

ISO 37001:2016

* Anti-bribery management systems — Requirements with guidance for use

F

TC 8 Ships and marine technology

ISO 16707:2016

* Ships and marine technology — Ma-rine evacuation systems — Determina-tion of capacity

D

TC 10 Technical product documentation

ISO 12756:2016

Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary

A

ISO 14145-1:2016

Roller ball pens and refills — Part 1: General use

B

ISO 27668-1:2016

Gel ink ball pens and refills — Part 1: General use

B

TC 17 Steel

ISO/TS 4949:2016

* Steel names based on letter symbols

B

ISO/TR 21074:2016

* Application of ISO 5725 for the deter-mination of repeatability and repro-ducibility of precision tests performed in standardization work for chemical analysis of steel

C

TC 20 Aircraft and space vehicles

ISO 23748:2016

* Aerospace series — O-ring grooves — Dimensions

E

TC 21 Equipment for fire protection and fire fighting

ISO 16852:2016

Flame arresters — Performance requirements, test methods and limits for use

F

TC 22 Road vehicles

ISO 16845-1:2016

* Road vehicles — Controller area network (CAN) conformance test plan — Part 1: Data link layer and physical signalling

H

ISO 17987-6:2016

* Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol con-formance test specification

G

ISO 18541-4:2015

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 4: Conform-ance test

G

ISO/TR 7637-5:2016

* Road vehicles — Electrical distur-bances from conduction and coupling — Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637

F

ISO 19364:2016

* Passenger cars — Vehicle dynamic simulation and validation — Steady-state circular driving behaviour

C

ISO 12156-1:2016

Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method

C

ISO 19689:2016

* Motorcycles and mopeds — Commu-nication between vehicle and external equipment for diagnostics — Diag-nostic connector and related electrical circuits, specification and use

B


ISO 17488:2016

* Road vehicles — Transport information and control systems — Detection-response task (DRT) for assessing attentional effects of cognitive load in driving

G

ISO 16380:2014/Amd 1:2016

* Road vehicles — Blended fuels refuel-ling connector — Amendment 1

XZ

TC 23 Tractors and machinery for agri-culture and forestry

ISO 5395-2:2013/Amd 1:2016

Garden equipment — Safety require-ments for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers — Amendment 1: OPC, cutting means, pressurized hoses

XZ

TC 27 Solid mineral fuels

ISO 13909-4:2016

* Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples

E

TC 28 Petroleum products and related products of synthetic or biologi-cal origin

ISO 3987:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives

B

ISO 10370:2014

Petroleum products — Determination of carbon residue — Micro method

B

TC 29 Small tools

ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills

D

ISO 2540:2016 Centre drills for centre holes with pro-tecting chamfer — Type B

A

ISO 2541:2016 Centre drills for centre holes with radius form — Type R

A

ISO 2584:2016 Cylindrical cutters with plain bore and key drive — Metric series

A

ISO 3291:2016 Extra-long Morse taper shank twist drills

A

ISO 3292:2016 Extra-long parallel shank twist drills

A

ISO 4202:2016 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks

A

ISO 4204:2016 Countersinks, 90°, with Morse taper shanks and detachable pilots

A

ISO 4205:2016 Countersinks, 90°, with parallel shanks and solid pilots

A

ISO 4206:2016 Counterbores with parallel shanks and solid pilots

A

ISO 4207:2016 Counterbores with Morse taper shanks and detachable pilots

A

ISO 7079:2016 Core drills with parallel shanks and with Morse taper shanks

B

ISO 12197:2016

Woodruff keyseat cutters — Dimensions

A

ISO 4230:2016 Hand- and machine-operated circular screwing dies for taper pipe threads — R series

A

ISO 4231:2016 Hand- and machine-operated circular screwing dies for parallel pipe threads — G series

A


ISO 24624:2016

Language resource management — Transcription of spoken language

E

TC 38 Textiles

ISO 18264:2016

Textile slings — Lifting slings for gen-eral purpose lifting operations made from fibre ropes — High modulus polyethylene (HMPE)

E

TC 41 Pulleys and belts (including veebelts)

ISO 9856:2016 Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus

A

ISO 15236-1:2016

Steel cord conveyor belts — Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use

C

TC 42 Photography

ISO 18935:2016

* Imaging materials — Colour images — Determination of water resistance of printed colour images

B


ISO 17638:2016

Non-destructive testing of welds — Magnetic particle testing

C

ISO 15614-7:2016

Specification and qualification of weld-ing procedures for metallic materials — Welding procedure test — Part 7: Overlay welding

D

TC 45 Rubber and rubber products

ISO 1401:2016 Rubber hoses for agricultural spraying

B

ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air — Specification

B


ISO 4081:2016 * Rubber hoses and tubing for cool-ing systems for internal-combustion engines — Specification

C

ISO 7233:2016 Rubber and plastics hoses and hose assemblies — Determination of resist-ance to vacuum

A

ISO 7326:2016 Rubber and plastics hoses — Assess-ment of ozone resistance under static conditions

B

ISO 7751:2016 Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure

A

ISO 8331:2016 Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance

C

ISO 23337:2016

Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine

B

ISO 23529:2016

Rubber — General procedures for preparing and conditioning test pieces for physical test methods

C

ISO 1304:2016 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number

C

ISO 1434:2016 Natural rubber in bales — Amount of bale coating — Determination

A

ISO 11344:2016

* Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography

D

ISO 4674-1:2016

Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods

B

TC 54 Essential oils

ISO 3848:2016 Essential oil of citronella, Java type

B

TC 59 Buildings and civil engineering works

ISO 19208:2016

* Framework for specifying performance in buildings

D

TC 60 Gears

ISO 6336-5:2016

Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials

F

TC 61 Plastics

ISO 1043-3:2016

Plastics — Symbols and abbreviated terms — Part 3: Plasticizers

B

ISO 15512:2016

Plastics — Determination of water content

D

ISO 29664:2010

Plastics — Artificial weathering includ-ing acidic deposition

C

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 14224:2016

* Petroleum, petrochemical and natural gas industries — Collection and ex-change of reliability and maintenance data for equipment

H

ISO 16440:2016

* Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines

F

ISO 19901-5:2016

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction

G

ISO 16904:2016

Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals

G

TC 69 Applications of statistical methods

ISO 13528:2015

Statistical methods for use in pro-ficiency testing by interlaboratory comparison

H

TC 70 Internal combustion engines

ISO 8528-13:2016

Reciprocating internal combustion engine driven alternating current gen-erating sets — Part 13: Safety

F

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO 19044:2016

* Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen

B

TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use

ISO 1135-3:2016

Transfusion equipment for medical use — Part 3: Blood-taking sets for single use

B

ISO 8871-5:2016

Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing

B

TC 83 Sports and other recreational facilities and equipment

ISO 20957-9:2016

Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods

C

TC 89 Wood-based panels

ISO 17064:2016

Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary

A

TC 92 Fire safety

ISO 24678-6:2016

Fire safety engineering — Require-ments governing algebraic formulae — Part 6: Flashover related phenomena

D


TC 94 Personal safety -- Protective clothing and equipment

ISO 374-1:2016

* Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks

B

ISO 374-5:2016

* Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks

A

ISO 20471:2013/Amd 1:2016

* High visibility clothing — Test methods and requirements — Amendment 1

XZ

ISO 16900-5:2016

Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools

E

TC 96 Cranes

ISO 4306-3:2016

Cranes — Vocabulary — Part 3: Tower cranes

A

TC 106 Dentistry

ISO 13078-2:2016

Dentistry — Dental furnace — Part 2: Test method for evaluation of furnace programme via firing glaze

B

ISO 3964:2016 Dentistry — Coupling dimensions for handpiece connectors

B

ISO 9173-1:2016

Dentistry — Extraction forceps — Part 1: General requirements

A

ISO 16409:2016

Dentistry — Oral care products — Manual interdental brushes

B

ISO 14801:2016

Dentistry — Implants — Dynamic load-ing test for endosseous dental implants

C

TC 108 Mechanical vibration, shock and condition monitoring

ISO 10326-1:2016

Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements

D

TC 110 Industrial trucks

ISO 18063-1:2016

* Rough-terrain trucks — Visibility — Test methods and their verification — Part 1: Variable-reach trucks

C

TC 119 Powder metallurgy

ISO 3928:2016 * Sintered metal materials, excluding hardmetals — Fatigue test pieces

B


ISO 18190:2016

Anaesthetic and respiratory equipment — General requirements for airways and related equipment

D

TC 122 Packaging

ISO 21067-1:2016

* Packaging — Vocabulary — Part 1: General terms

A


ISO 14990-1:2016

* Earth-moving machinery — Electrical safety of machines utilizing elec-tric drives and related components and systems — Part 1: General requirements

G

ISO 14990-2:2016

* Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 2: Particular re-quirements for externally-powered machines

C

ISO 14990-3:2016

* Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 3: Particular require-ments for self-powered machines

C

TC 131 Fluid power systems

ISO 11171:2016

Hydraulic fluid power — Calibration of automatic particle counters for liquids

G

ISO 21018-4:2016

Hydraulic fluid power — Monitoring the level of particulate contamination in the fluid — Part 4: Use of the light extinc-tion technique

B

TC 145 Graphical symbols

ISO 7010:2011/Amd 7:2016

* Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 7

XZ

TC 146 Air quality

ISO 22262-3:2016

Air quality — Bulk materials — Part 3: Quantitative determination of asbestos by X-ray diffraction method

F

TC 149 Cycles

ISO 4210-2:2015

Cycles — Safety requirements for bi-cycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles

E

ISO 4210-6:2015

Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods

D

ISO 8098:2014 Cycles — Safety requirements for bicycles for young children

F

TC 150 Implants for surgery

ISO 5832-3:2016

Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy

B

TC 164 Mechanical testing of metals

ISO 14577-4:2016

Metallic materials — Instrumented in-dentation test for hardness and materi-als parameters — Part 4: Test method for metallic and non-metallic coatings

D

ISO 148-1:2016

Metallic materials — Charpy pendulum impact test — Part 1: Test method

E


ISO 148-2:2016

Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines

F

ISO 148-3:2016

Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

C

TC 170 Surgical instruments

ISO 7153-1:2016

Surgical instruments — Materials — Part 1: Metals

C


ISO 12870:2016

Ophthalmic optics — Spectacle frames — Requirements and test methods

D

IEC 80601-2-58:2014/Amd 1:2016

* Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery — Amendment 1: Proposed Horizontal Standard

XZ

TC 173 Assistive products for persons with disability

ISO 9999:2016 Assistive products for persons with disability — Classification and terminology

H

ISO 12505-2:2016

* Skin barrier for ostomy aids — Test methods — Part 2: Wet integrity and adhesive strength

B

TC 176 Quality management and quality assurance

ISO/TS 9002:2016

* Quality management systems — Guidelines for the application of ISO 9001:2015

F

TC 182 Geotechnics

ISO 17892-4:2016

Geotechnical investigation and test-ing — Laboratory testing of soil — Part 4: Determination of particle size distribution

E

ISO 18674-2:2016

* Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measure-ment of displacements along a line: Extensometers

F

TC 184 Automation systems and integration

ISO 18828-2:2016

* Industrial automation systems and integration — Standardized procedures for production systems engineering — Part 2: Reference process for seamless production planning

E

TC 189 Ceramic tile

ISO 14448:2016

* Low modulus adhesives for exterior tile finishing

D


ISO 22489:2016

* Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy

C

TC 204 Intelligent transport systems

ISO 16787:2016

* Intelligent transport systems — As-sisted Parking System (APS) — Per-formance requirements and test procedures

E

ISO 18682:2016

* Intelligent transport systems — Exter-nal hazard detection and notification systems — Basic requirements

D

ISO 19080:2016

* Intelligent transport systems — Com-munications access for land mobiles (CALM) — CoAP facility

C

ISO/TR 19083-1:2016

* Intelligent transport systems — Emergency evacuation and disaster response and recovery — Part 1: Framework and concept of operation

G


ISO 19603:2016

* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of thick ceramic coatings

B

TC 210 Quality management and cor-responding general aspects for medical devices

ISO 80369-7:2016

Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications

F

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO/TS 16782:2016

* Clinical laboratory testing — Criteria for acceptable lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing

D

ISO 22870:2016

Point-of-care testing (POCT) — Re-quirements for quality and competence

B


IEC 82304-1:2016

* Health software — Part 1: General requirements for product safety

D

TC 260 Human resource management

ISO 30409:2016

Human resource management — Workforce planning

E

TC 265 Carbon dioxide capture, trans-portation, and geological storage

ISO 27913:2016

Carbon dioxide capture, transporta-tion and geological storage — Pipeline transportation systems

E


ISO 37101:2016

Sustainable development in communi-ties — Management system for sus-tainable development — Requirements with guidance for use

E

TC 269 Railway applications

ISO/TR 21245-2:2016

* Railway applications — Rail project planning process — Part 2: Conditions

A


TC 274 Light and lighting

ISO/CIE 28077:2016

* Photocarcinogenesis action spectrum (non-melanoma skin cancers)

B

TC 292 Security and resilience

ISO 22325:2016

* Security and resilience — Emergency management — Guidelines for capabil-ity assessment

B

TC 301 Energy management and energy savings

ISO 50047:2016

Energy savings — Determination of energy savings in organizations

F

CASCO Committee on conformity assessment

ISO/IEC TS 17021-9:2016

* Conformity assessment — Require-ments for bodies providing audit and certification of management systems — Part 9: Competence requirements for auditing and certification of anti-bribery management systems

A

ISO 17034:2016

General requirements for the compe-tence of reference material producers

D


ISO/IEC 33071:2016

* Information technology — Process assessment — An integrated process capability assessment model for Enter-prise processes

H

ISO/IEC/IEEE 8802-1BA:2016

* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1BA: Audio video bridging (AVB) systems

E

ISO/IEC/IEEE 8802-1BR:2016

* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Spe-cific requirements — Part 1BR: Virtual bridged local area networks — Bridge port extension

H

ISO/IEC 9594-8:2014/Cor 2:2016

* Information technology — Open Systems Interconnection — The Direc-tory — Part 8: Public-key and attribute certificate frameworks — Technical Corrigendum 2

free

ISO/IEC 29110-3-3:2016

* Systems and software engineering — Lifecycle profiles for Very Small Enter-prises (VSEs) — Part 3-3: Certification requirements for conformity assess-ments of VSE profiles using process assessment and maturity models

C

ISO/IEC 29155-4:2016

* Systems and software engineer-ing — Information technology project performance benchmarking framework — Part 4: Guidance for data collection and maintenance

E

ISO/IEC 17839-3:2016

* Information technology — Identification cards — Biometric System-on-Card — Part 3: Logical information interchange mechanism

C

ISO/IEC 18328-3:2016

* Identification cards — ICC-managed devices — Part 3: Organization, secu-rity and commands for interchange

F

ISO/IEC 18598:2016

* Information technology — Automated infrastructure management (AIM) sys-tems — Requirements, data exchange and applications

E

ISO/IEC 10118-1:2016

* Information technology — Security techniques — Hash-functions — Part 1: General

B

ISO/IEC 11770-6:2016

* Information technology — Security techniques — Key management — Part 6: Key derivation

D

ISO/IEC 27034-6:2016

* Information technology — Security techniques — Application security — Part 6: Case studies

G

ISO/IEC 27035-1:2016

* Information technology — Security techniques — Information security inci-dent management — Part 1: Principles of incident management

D

ISO/IEC 27035-2:2016

* Information technology — Security techniques — Information security incident management — Part 2: Guide-lines to plan and prepare for incident response

G

ISO/IEC 13818-1:2015/Amd 4:2016

* Information technology — Generic coding of moving pictures and associ-ated audio information — Part 1: Sys-tems — Amendment 4: New profiles and levels for MPEG4 audio descriptor

XZ

ISO/IEC 13818-1:2015/Amd 5:2016

* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Amendment 5: Carriage of MPEGH 3D audio over MPEG2 systems

XZ

ISO/IEC 13818-1:2015/Amd 6:2016

* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Amendment 6: Carriage of Quality Metadata in MPEG-2 Systems

XZ

ISO/IEC 13818-1:2015/Cor 1:2016

* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Technical Corrigendum 1

free

ISO/IEC 13818-1:2015/Amd 1:2015/Cor 2:2016

* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Amendment 1: Delivery of timeline for external data — Technical Corrigendum 2

free

ISO/IEC 15444-1:2016

* Information technology — JPEG 2000 image coding system: Core coding system — Part 1:

H

ISO/IEC 18477-8:2016

* Information technology — Scalable compression and coding of continu-ous-tone still images — Part 8: Loss-less and near-lossless coding

G

ISO/IEC 18477-9:2016

* Information technology — Scalable compression and coding of continu-ous-tone still images — Part 9: Alpha channel coding

D

ISO/IEC TR 19566-2:2016

* Information technologies — JPEG Sys-tems — Part 2: Transport mechanisms and packaging

C

ISO/IEC 23003-2:2010/Amd 4:2016

* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 4: SAOC Conformance

E


ISO/IEC 23003-2:2010/Amd 5:2016

* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 5: SAOC Reference Software

XZ

ISO/IEC 23009-1:2014/Amd 3:2016

* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation descrip-tion and segment formats — Amend-ment 3: Authentication, MPD linking, Callback Event, Period Continuity and other Extensions

E

ISO/IEC 30116:2016

* Information technology — Automatic identification and data capture tech-niques — Optical Character Recogni-tion (OCR) quality testing

E

ISO/IEC 29500-1:2016

* Information technology — Document description and processing languages — Office Open XML File Formats — Part 1: Fundamentals and Markup Language Reference

H

ISO/IEC 29500-4:2016

* Information technology — Document description and processing languages — Office Open XML File Formats — Part 4: Transitional Migration Features

H

ISO/IEC TR 20000-12:2016

* Information technology — Service management — Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and service manage-ment frameworks: CMMI-SVC

E

Standards confirmed

The following International Standards are confimred for a five year period:

TC 2 Fasteners

ISO 887:2000 (reconfirmed)




ISO 7093-1:2000 (reconfirmed)




ISO 4753:2011



ISO 1207:2011

ISO 1580:2011

ISO 2009:2011

ISO 2010:2011


ISO 4766:2011

ISO 7045:2011

ISO 7046-1:2011

ISO 7046-2:2011

ISO 7047:2011

ISO 7048:2011

ISO 7380-1:2011

ISO 7380-2:2011

ISO 14579:2011

ISO 14580:2011

ISO 14583:2011

ISO 14584:2011


ISO 7049:2011

ISO 7050:2011

ISO 7051:2011

ISO 14585:2011

ISO 14586:2011

ISO 14587:2011

TC 20 Aircraft and space vehicles


TC 22 Road vehicles

ISO 15031-1:2010

ISO 16844-2:2011

ISO 22901-2:2011


ISO 7440-1:1991


ISO 20176:2011


ISO 11839:2010

TC 28 Petroleum products and related prod-ucts of synthetic or biological origin

















TC 29 Small tools

ISO 1641-2:2011

ISO 1641-3:2011








ISO 3860:2011



ISO 6462:2011






TC 30 Measurement of fluid flow in closed conduits

ISO 22158:2011

TC 31 Tyres, rims and valves



TC 34 Food products



ISO 13720:2010










ISO/TS 21569-2:2012

TC 35 Paints and varnishes



ISO 10241-1:2011







ISO 11863:2011

ISO/TS 15686-9:2008

(reconfirmed)

ISO 10845-5:2011

ISO 10845-6:2011

ISO 10845-7:2011

ISO 10845-8:2011

TC 61 Plastics

ISO 1043-1:2011

ISO 1043-2:2011

ISO 6721-1:2011






ISO 6721-10:2015















TC 70 Internal combustion engines


TC 72 Textile machinery and accessories


TC 84 Devices for administration of medicinal products and catheters

ISO 11608-4:2006

ISO 23908:2011

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 27048:2011

TC 92 Fire safety


TC 113 Hydrometry




ISO 4364:1997

TC 114 Horology

ISO 23160:2011

TC 126 Tobacco and tobacco products




ISO/TS 22304:2008

(reconfirmed)


TC 131 Fluid power systems

ISO 16589-1:2011

ISO 16589-3:2011

ISO 16589-4:2011

ISO 16589-5:2011

TC 146 Air quality


ISO 17736:2010


TC 147 Water quality

ISO/TS 16489:2006

(reconfirmed)

ISO/TS 17379-1:2013

ISO/TS 17379-2:2013








TC 150 Implants for surgery




ISO 25297-1:2012

ISO 25297-2:2011


TC 184 Automation systems and integration

ISO 10303-223:2008

(reconfirmed)

TC 216 Footwear

ISO 10748:2011

TC 229 Nanotechnologies

ISO/TS 16195:2013

ISO/TS 17200:2013

TC 251 Asset management

ISO 55000:2014

ISO 55001:2014


ISO/IEC 29183:2010

Standards withdrawn


REMCO Committee on reference materials

ISO Guide 34:2009 (replaced by ISO 17034:2016)

TC 22 Road vehicles

ISO 16845:2004 (replaced by ISO 16845-1:2016)

ISO/TR 9310:1987 (replaced by )

TC 47 Chemistry

ISO 78-3:1983 (replaced by )


ISO 2590:1973 (replaced by )








ISO 6240:1980 (replaced by ISO 19208:2016)




ISO/PAS 22539:2007

(replaced by ISO 19208:2016)

TC 79 Light metals and their alloys










TC 114 Horology





TC 122 Packaging

ISO 21067:2007 (replaced by ISO 21067-2:2015, ISO 21067-1:2016)

TC 182 Geotechnics

ISO/TS 17892-4:2004

(replaced by ISO 17892-4:2016)


ISO/IEC 27035:2011

(replaced by ISO/IEC 27035-1:2016, ISO/IEC 27035-2:2016)

Meeting calendar

(update at 01 October 2016)

Meetings called for the month of September are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

November 2016

7-8 London (United Kingdom)

TC 241 Road traffic safety management systems

7-8 Tel Aviv (Israel) TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems

7-11 Orlando (USA) PC 302 Guidelines for audit-ing management systems

7-11 Delft (Netherlands)

TC 210 Quality management and corresponding general aspects for medical devices

7-11 Singapore (Singapore)

TC 229 Nanotechnologies

7-11 Tel Aviv (Israel) TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation

7-12 Lillehammer (Norway)

** JTC 1 Information technology


8-9 Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

8-10 Kobe (Japan) TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

9 Sydney (Australia)

TC 98/SC 1 Bases for design of structures/Terminol-ogy and symbols

9-10 Tel Aviv (Israel) TC 282/SC 2 Water reuse/Water reuse in urban areas


TC 309 Organizational governance


TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

10 Tel Aviv (Israel) TC 282 Water reuse

10-11 Bern (Switzerland)

TC 34/SC 12 Food products/Sen-sory analysis

10-11 Busan (Korea, Republic of)

TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction


TC 98 Bases for design of structures

13-17 Lillehammer (Norway)


14 Berlin (Germany) TC 83/SC 6 Sports and other recreational facilities and equipment/Mar-tial arts

14-15 Milton (Canada) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

14-15 Milton (Canada) TC 44/SC 10 Welding and allied processes/Quality management in the field of welding

14-18 Toronto (Canada) TC 44 Welding and allied processes

15-16 Toronto (Canada) TC 44/SC 7 Welding and allied processes/Represen-tation and terms

15-17 Boulogne Billan-court (France)

* TC 22/SC 39 Road vehicles/Ergonomics

15-18 Linyi (China) TC 134 Fertilizers and soil conditioners

16 Milton (Canada) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds

16 Toronto (Canada) TC 44/SC 9 Welding and allied processes/Health and safety

17 Oslo (Norway) TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations

17 Hiroshima City (Japan)

TC 244 Industrial furnaces and associated pro-cessing equipment

17-18 Orlando (USA) TC 299 Robotics

18 Rome (Italy) TC 160/SC 1 Glass in build-ing/Product considerations

18 Rome (Italy) TC 160/SC 2 Glass in building/Use considerations

21-23 Kuala Lumpur (Malaysia)

PC 303 Guidelines on con-sumer warranties and guarantees

21-24 Wellington (New Zealand)

TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

21-24 Toronto (Canada) TC 272 Forensic sciences

21-25 Beijing (China) PC 287 Chain of custody of wood and wood-based products

24 Brussels (Belgium)

TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection


TC 281 Fine Bubble Technology

24-26 Istanbul (Turkey) TC 34/SC 3 Food products/Fruits and vegetables and their derived products

25 Tokyo (Japan) TC 300 Solid recovered fuels

November-December 2016

27-2 Rotterdam (Netherlands)

TC 176 Quality management and quality assurance

28-2 Guildford (United Kingdom)

TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems

28-2 Redlands (USA) TC 211 Geographic in-formation/Geomatics

29-1 Tokyo (Japan) PC 294 Guidance on unit pricing

30-2 Kurashiki (Japan) TC 172/SC 9 Optics and photon-ics/Electro-optical systems

December 2016


TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

1-2 Sapporo (Japan) TC 265 Carbon dioxide capture, transporta-tion, and geological storage

1-2 Paris (France) * TC 297 Waste management, recycling and road operation service

5 Amsterdam (Netherlands)

* TC 197 Hydrogen technologies

5-9 Sydney (Australia)

TC 217 Cosmetics

6-8 Lübeck (Germany)

TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment

6-9 Rio de Janeiro (Brazil)

PC 277 Sustainable procurement

6-9 Dublin (Ireland) TC 275 Sludge recovery, recycling, treatment and disposal


8 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities

8-9 Petten (Netherlands)

TC 197 Hydrogen technologies

9 Beijing (China) TC 34/SC 6 Food products/Meat, poultry, fish, eggs and their products

9 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

15-16 Erlangen (Germany)

TC 184/SC 1 Automation systems and integration/Physi-cal device control

January 2017


TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment

17-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings

19 Tokyo (Japan) TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

24-25 Cochin (India) TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

February 2017

2 Tucson (USA) TC 261 Additive manufacturing

6-10 Tunis (Tunisia) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

6-10 Berlin (Germany) ** JTC 1/SC 35 Information technol-ogy/User interfaces

6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

15 Geneva (Switzerland)

President's committee


17 Galveston (USA) TC 304 Healthcare administration

20 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment


* TC 8/SC 8 Ships and marine technology/Ship design


** TMB Technical Manage-ment Board

22-24 Paris (France) * TC 147/SC 3 Water qual-ity/Radioactivity measurements

24-26 St. John, Newfoundland (Canada)

TC 121/SC 4 Anaesthetic and res-piratory equipment/Terminology and semantics

Budapest (Hungary)

** TC 267 Facilities management

March 2017

6 Kyoto (Japan) ** TC 60 Gears

6 Kyoto (Japan) * TC 60/SC 1 Gears/Nomenclature and wormgearing

6 Kyoto (Japan) * TC 60/SC 2 Gears/Gear capacity calculation





CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

16-17 Geneva (Switzerland)

COUNCIL Council

20-24 Leeds (United Kingdom)

* TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

27 Toronto (Canada) * TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests

27-31 Chengdu (China) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

28 Toronto (Canada) * TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors

29 Philadelphia (USA)

* TC 219 Floor coverings

30 Toronto (Canada) * TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation

30 Pau (France) * TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

30-31 Toronto (Canada) * TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort

April 2017

3-4 Chicago (USA) TC 117 Fans

3-7 Stockholm (Sweden)

* TC 118 Compressors and pneumatic tools, ma-chines and equipment


* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines


* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems


* TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

6 Stockholm (Sweden)

* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air treatment technology


10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding

17-21 Hangzhou (China)


22-26 Faro, Algarve (Portugal)

* TC 282/SC 2 Water reuse/Water reuse in urban areas

24-25 Hamilton (New Zealand)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

24-28 Jeju (Korea, Republic of)

* TC 292 Security and resilience

26 London (United Kingdom)

* TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

26-27 Vancouver (Canada)

* CASCO Committee on con-formity assessment

27 Virtual (Unknown)

* TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

Toulouse (France)

** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

Toulouse (France)

** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

Toulouse (France)

** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

Orlando (USA) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

Orlando (USA) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

(Unknown) ** TC 34/SC 15 Food products/Coffee

(Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa

May 2017

3 Virtual (Unknown)

* TC 22/SC 31 Road vehicles/Data communication

7-12 Oslo (Norway) * TC 184/SC 4 Automation systems and integration/Indus-trial data

8 Berlin (Germany) * TC 171/SC 1 Document manage-ment applications/Quality, preserva-tion and integrity of information

8-11 Madrid (Spain) * TC 272 Forensic sciences


* TC 10 Technical product documentation

8-12 (Netherlands) ** TC 35 Paints and varnishes

8-12 Vienna (Austria) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

8-12 Seoul (Korea, Republic of)

* TC 161 Controls and protec-tive devices for gas and/or oil

8-12 Berlin (Germany) ** TC 171 Document manage-ment applications

11 Stockholm (Sweden)

** TC 10/SC 1 Technical product documentation/Basic conventions

15-18 (USA) ** TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear in-stallations, processes and technologies

15-19 Washington, D.C (USA)

* TC 4 Rolling bearings

15-19 Seattle (USA) * TC 31 Tyres, rims and valves

15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims

15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

15-19 Rio de Janeiro (Brazil)

TC 68 Financial services

18 Busan (Korea, Republic of)

* TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe


COPOLCO Committee on con-sumer policy

22-26 Pretoria (South Africa)

* TC 46/SC 4 Information and documentation/Tech-nical interoperability

22-26 Pretoria (South Africa)

* TC 46/SC 11 Information and doc-umentation/Archives/records management

22-26 (USA) ** TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines


* TC 193/SC 1 Natural gas/Analysis of natural gas

22-26 (Panama) ** TC 228 Tourism and related services

23-25 (Japan) ** TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection

25-26 Hannover (Germany)

* TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

29-30 Tokyo (Japan) * TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

(Japan) ** JTC 1/SC 32 Information technolo-gy/Data management and interchange

Stockholm (Sweden)

** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation


Stockholm (Sweden)

** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation

(Sweden) ** TC 29 Small tools

(Unknown) ** TC 226 Materials for the production of primary aluminium

May-June 2017

27-2 (Ireland) ** TC 238 Solid biofuels

29-2 Okayama (Japan)

* JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance


* TC 211 Geographic in-formation/Geomatics

31-2 Delft (Netherlands)

** TC 145 Graphical symbols

June 2017

5-9 Colorado Springs (USA)

** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

5-9 (Unknown) ** TC 268 Sustainable cities and communities

5-9 (Unknown) ** TC 268/SC 1 Sustainable cities and communities/Smart community infrastructures

6-9 Jeju (Korea, Republic of)

** TC 156 Corrosion of metals and alloys

7-9 (USA) ** TC 220 Cryogenic vessels

8-9 Cambridge (Unit-ed Kingdom)

* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

9 Chicago (USA) * TC 136 Furniture

12-16 Paris (France) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

12-16 Shanghai (China) * TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers


** TMB Technical Manage-ment Board


* JTC 1/SC 28 Information technol-ogy/Office equipment


CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)


* TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects

19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/Microbiology

19-23 Cape Town (South Africa)

* TC 69 Applications of statis-tical methods


* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols


* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management


* TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results


* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma


* TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development

19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and major sub-assemblies

23-30 (Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training


* TC 193 Natural gas


* TC 193/SC 3 Natural gas/Upstream area

27-28 Qingdao (China) President's committee


Tokyo (Japan) * JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

(USA) ** TC 42 Photography

(Unknown) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

Chennai (India) ** TC 120 Leather

Delft (Netherlands)

** TC 274 Light and lighting

2nd Quarter 2017

(Korea, Repub-lic of)

** TC 6 Paper, board and pulps

Tsukuba (Japan) ** TC 92 Fire safety

(India) ** TC 113 Hydrometry

July 2017

7 Milan (Italy) ** TC 206 Fine ceramics

22 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information

24-28 Paris (France) * JTC 1/SC 35 Information technol-ogy/User interfaces

August 2017



* JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces



September 2017

4-8 Berlin (Germany) * TC 21 Equipment for fire protection and fire fighting

11-15 San Francisco (USA)

* JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms


** TC 17/SC 17 Steel/Steel wire rod and wire products

11-15 Gaithersburg (USA)

* TC 108 Mechanical vibration, shock and condition monitoring

11-15 Gaithersburg (USA)

* TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems

17 Berlin (Germany) President's committee



* TC 61 Plastics


* TC 164 Mechanical testing of metals

18 Berlin (Germany) * COUNCIL Council


* TC 290 Online reputation

19 Berlin (Germany) ** TMB Technical Manage-ment Board


* TC 221 Geosynthetics

20-22 Berlin (Germany) ** GA General Assembly

21-22 Berlin (Germany) * TC 22/SC 31 Road vehicles/Data communication


** TC 201 Surface chemical analysis

25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings

25-29 Florence (Italy) * TC 146/SC 1 Air quality/Stationary source emissions

25-29 (Europe) ** TC 146/SC 6 Air quality/Indoor air

25-29 Tokyo (Japan) * TC 205 Building environment design

25-29 Berlin (Germany) * TC 232 Learning services outside formal education

26-30 San José, Cali-fornia (USA)

* JTC 1/SC 2 Information technol-ogy/Coded character sets

27 Düsseldorf (Germany)

* TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes

28 (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines


TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure

29 Berlin (Germany) ** TC 254 Safety of amusement rides and amusement devices

London (United Kingdom)

** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

(Australia) ** TC 27 Solid mineral fuels

(Australia) ** TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance

(Australia) ** TC 27/SC 3 Solid mineral fuels/Coke

(Australia) ** TC 27/SC 4 Solid mineral fuels/Sampling

(Australia) ** TC 27/SC 5 Solid mineral fuels/Methods of analysis

Erlangen (Germany)

** TC 36 Cinematography

Copenhagen (Denmark)

** TC 58/SC 2 Gas cylinders/Cylin-der fittings

Tel Aviv (Israel) ** TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

Sapporo (Japan) ** TC 71 Concrete, reinforced concrete and pre-stressed concrete

(Europe) ** TC 146/SC 3 Air quality/Ambient atmospheres

Vienna (Austria) ** TC 165 Timber structures

(Nigeria) ** TC 260 Human resource management

(Malaysia) ** TC 267 Facilities management

3rd Quarter 2017

Beijing (China) ** TC 289 Brand evaluation

Vienna (Austria) ** TC 289 Brand evaluation

October 2017

2-7 Vladivostok (Russian Federation)

* JTC 1 Information technology

8 New Orleans (USA)

* TC 38 Textiles

9-10 Xian (China) * TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

9-13 New Delhi (India) ** TC 178 Lifts, escalators and moving walks

10-13 Berlin (Germany) ** TC 153 Valves

11 New Orleans (USA)

* TC 38/SC 1 Textiles/Tests for coloured textiles and colorants


* TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests


* TC 38/SC 23 Textiles/Fibres and yarns



* TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

16-20 Tokyo (Japan) * TC 111 Round steel link chains, chain slings, components and accessories

16-20 Tokyo (Japan) * TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings

17-18 Qingdao (China) * TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres


** TC 264 Fireworks


* TC 105 Steel wire ropes




20 Tokyo (Japan) * TC 111/SC 3 Round steel link chains, chain slings, components and accessories/Components and accessories

22-27 Hawaii (USA) * TC 45 Rubber and rubber products

23-26 Brussels (Belgium)

** TC 146/SC 2 Air quality/Workplace atmospheres

23-26 Brussels (Belgium)

** TC 146/SC 4 Air quality/General aspects

23-27 (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools


TC 209 Cleanrooms and as-sociated controlled environments

(Unknown) ** TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products

Washington, D.C (USA)

** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

Pretoria (South Africa)

** TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages

Dallas (USA) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works


** TC 59/SC 15 Buildings and civil engineering works/Framework for the description of hous-ing performance


** TC 59/SC 18 Buildings and civil en-gineering works/Con-struction procurement

Milan (Italy) ** TC 86/SC 7 Refrigeration and air-conditioning/Test-ing and rating of com-mercial refrigerated display cabinets

November 2017

7 Marseille (France)

* TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints

8-9 Berlin (Germany) * TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

8-10 Manila (Philippines)

* TC 123 Plain bearings

10 Berlin (Germany) * TC 70 Internal combustion engines




CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

(India) ** TC 54 Essential oils

(Korea, Repub-lic of)

** TC 184/SC 4 Automation systems and integration/Indus-trial data

(Australia) ** TC 292 Security and resilience

4th Quarter 2017

(China) ** TC 34/SC 4 Food products/Cere-als and pulses

Month unknown 2017

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

(South Africa) ** TC 46 Information and documentation

(USA) ** TC 198 Sterilization of health care products

(China) ** TC 301 Energy management and energy savings

February 2018

12 (Sweden) ** TC 58 Gas cylinders

12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

March 2018


** COUNCIL Council

1st Quarter 2018

(Netherlands) ** JTC 1/SC 35 Information technol-ogy/User interfaces

April 2018

(USA) ** TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

Edinburgh (Unit-ed Kingdom)

** TC 147 Water quality

June 2018


Daegu (Korea, Republic of)

** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(Norway) ** TC 292 Security and resilience

September 2018

10-11 Toronto (Canada) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces


** COUNCIL Council


** GA General Assembly

Vienna (Austria) ** TC 5 Ferrous metal pipes and metallic fittings

Philadelphia (USA)

** TC 28 Petroleum products and related products of synthetic or bio-logical origin

(Japan) ** TC 61 Plastics

(Mexico) ** TC 201 Surface chemical analysis

3rd Quarter 2018

(Japan) ** JTC 1/SC 35 Information technol-ogy/User interfaces

(Netherlands) ** TC 92 Fire safety

Sao Paulo (Brazil)

** TC 135 Non-destructive testing

October 2018

1-2 The Hague (Netherlands)

** TC 209 Cleanrooms and as-sociated controlled environments

Beijing (China) ** TC 59 Buildings and civil engineering works

(China) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works

(Malaysia) ** TC 215 Health informatics

Month unknown 2018

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Zhuhai (China) ** JTC 1/SC 28 Information technol-ogy/Office equipment

(Unknown) ** TC 34 Food products

(China) ** TC 45 Rubber and rubber products

(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

(China) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Firefighters' personal equipment

Milan (Italy) ** TC 161 Controls and protec-tive devices for gas and/or oil

Buenos Aires (Argentina)

** TC 228 Tourism and related services

(Unknown) ** TC 276 Biotechnology

(Mexico) ** TC 301 Energy management and energy savings

June 2019

Beijing (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

Month unknown 2019

(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Month unknown 2020

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Documents

ISO Update - International Organization for … · ISO Update, Supplement to ISO Focus -- November 2016 3. ISO/DIS 11783-6 * Tractors and machinery for agriculture and forestry —