ISO Update · ISO Update, Supplement to ISO Focus -- September 2013 1 International Standards in process ... ISO/CD 8502-3 Preparation of steel substrates before applica-

ISO Update

Supplement to ISO Focus+

September 2013

ISO Update, Supplement to ISO Focus -- September 2013 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 August to 31 August 2013

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 4 Rolling bearings

ISO/CD 104 Rolling bearings — Thrust bearings — Bound-ary dimensions, general plan

TC 8 Ships and marine technology

ISO/CD 29400 Ships and marine technology — Offshore wind energy — Ports and marine operations

TC 10 Technical product documentation

ISO/CD 13715 Technical drawings — Edges of undefined shape — Vocabulary and indications

ISO/CD 81346-12

Industrial systems, installations and equip-ment and industrial products — Structuring principles and reference designations — Part 12: Buildings and building services

TC 17 Steel

ISO/CD 22034-2

Steel wire and wire products — Part 2: Toler-ances on wire dimensions

TC 20 Aircraft and space vehicles

ISO/CD 2100 Aircraft — Electrical connectors — Tests

ISO/CD 6858 Aircraft — Ground support electrical supplies — General requirements

ISO/CD 15699 Aerospace vehicle interconnection installation practices

ISO/CD 17689 Space systems — Interface control documents between ground technological equipment, launch site systems and launch vehicle with payload

TC 21 Equipment for fire protection and fire fighting

ISO/CD 7240-8 Fire detection and alarm systems — Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor

TC 22 Road vehicles

ISO/CD 17536-2

Road vehicles — Aerosol separator perfor-mance test for internal combustion engines — Part 2: Laboratory gravimetric test method

ISO/DTS 17536-3

Road vehicles — Aerosol separator perfor-mance test for internal combustion engines — Part 3: Engine gravimetric test method

ISO/DTS 13499

Road vehicles — Multimedia data exchange format for impact tests

ISO/DTS 17242

Quasi-static Calibration Procedure for Belt Force Transducers

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 17989-1

Tractors and machinery for agriculture and forestry — Sustainability — Part 1: Principles

ISO/CD 4254-7 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters

TC 28 Petroleum products and lubricants

ISO/CD 20844 Petroleum products and lubricants — De-termination of the shear stability of polymer-containing oils using a diesel injector nozzle — Complementary element

ISO/CD 26422 Petroleum and related products — Determina-tion of shear stability of lubricating oils contain-ing polymers — Method using a tapered roller bearing

TC 34 Food products

ISO/CD 19046-1

Cheese — Determination of propionic acid by chromatography — Part 1: Reference method

ISO/CD 19046-2

Cheese — Determination of propionic acid by chromatography — Part 2: Routine method

TC 35 Paints and varnishes

ISO/CD 3668 Paints and varnishes — Visual comparison of the colour of paints

ISO/CD 8502-3 Preparation of steel substrates before applica-tion of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

ISO/CD 8502-4 Preparation of steel substrates before applica-tion of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application

ISO/CD 8502-9 Preparation of steel substrates before applica-tion of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric deter-mination of water-soluble salts

TC 38 Textiles

ISO/CD 137 Wool — Determination of fibre diameter — Projection microscope method

ISO/CD 1136 Wool — Determination of mean diameter of fibres — Air permeability method

TC 43 Acoustics

ISO/CD 1996-2 Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels

ISO 3745:2012/CD Amd 1

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1

2 ISO Update, Supplement to ISO Focus -- September 2013

ISO/CD 17534-1

Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance

ISO/DTR 17534-2

Acoustics — Software for the calculation of sound outdoors — Part 2: General recommen-dations for test cases and quality assurance interface

TC 45 Rubber and rubber products

ISO/DTS 22762-4

Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3

TC 92 Fire safety

ISO/DTR 17755

Fire Safety — Statistical data

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO/CD 16063-32

Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation

ISO/CD 16063-33

Methods for the calibration of vibration and shock transducers — Part 33: Testing of mag-netic field sensitivity

TC 113 Hydrometry

ISO/DTR 9212 Hydrometry — Methods of measurement of bedload discharge

TC 131 Fluid power systems

ISO/CD 1219-3 Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams

ISO/CD 8434-1 Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors

ISO/CD 8434-2 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors

ISO/CD 8434-6 Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connec-tors with or without O-ring

TC 133 Clothing sizing systems - size designa-tion, size measurement methods and digital fittings

ISO/CD 18825-1

Clothing — Digital fittings — Part 1: Vocabulary and terminology used for the virtual human body

ISO/CD 18825-2

Clothing — Digital fittings — -- Part 2: Vo-cabulary and terminology used for virtual body dimensions of the virtual human body

ISO/CD 18825-3

Clothing — Digital fittings — Part 3: Vocabulary and terminology used for virtual bones and joints of the virtual human body

ISO/CD 18825-4

Clothing — Digital fittings — Part 4: Vocabulary and terminology used for the virtual torso, arms and legs of the virtual human body

ISO/CD 18825-5

Clothing — Digital fittings — Part 5: Vocabulary and terminology used for the virtual head and face of the virtual human body

ISO/CD 18825-6

Clothing — Digital fittings — Part 6: Vocabulary and terminology used for the virtual hand of the virtual human body

ISO/CD 18825-7

Clothing — Digital fittings — Part 7: Vocabulary and terminology used for the virtual foot of the virtual human body

ISO/CD 18831 Clothing — Digital fittings — Attributes of virtual garments

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 16611 Plastics piping systems for drainage and sew-erage without pressure — Non-circular pipes and joints made of glass-reinforced thermo-setting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, require-ments and tests

ISO/DTS 18853

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Guidance for the assessment of conformity

TC 146 Air quality

ISO/CD 12219-6

Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials — Small chamber method

TC 160 Glass in building

ISO/CD 18178 Glass in building — Laminated solar PV glass

TC 164 Mechanical testing of metals

ISO/CD 148-1 Metallic materials — Charpy pendulum impact test — Part 1: Test method

ISO/CD 148-2 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines

ISO/CD 148-3 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characteriza-tion of Charpy V-notch test pieces for indirect verification of pendulum impact machines

ISO/CD 14556 Steel — Charpy V-notch pendulum impact test — Instrumented test method

TC 171 Document management applications

ISO/CD 18160 Document management — Digital preservation — Analog recording to silvergelatin microform

TC 180 Solar energy

ISO/CD 22975-1

Solar Energy — Collector components and ma-terials — Part 1: Evacuated tubes — Durability and performance

ISO/CD 22975-2

Solar Energy — Collector components and materials — Part 2: Heat-pipe for evacuated tubes — Durability and performance

TC 193 Natural gas

ISO/CD 6976 Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition

TC 201 Surface chemical analysis

ISO/CD 18337 Surface chemical analysis — Measurement of lateral resolution of confocal fluorescence microscope

TC 206 Fine ceramics

ISO/CD 15733 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile stress-strain behaviour of continuous, fibre- reinforced composites at room temperature

ISO/CD 17942 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders

ISO/CD 17947 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders

TC 210 Quality management and correspond-ing general aspects for medical devices


ISO/CD 16142-1

Medical devices — Recognized essential prin-ciples of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards

TC 215 Health informatics

ISO/DTS 17439

Health informatics — Development of terms and definitions for health informatics and glossaries

ISO/CD 21549-5

Health informatics — Patient healthcard data — Part 5: Identification data

TC 229 Nanotechnologies

ISO/DTR 16197

Nanotechnologies - Guidance on toxico-logical screening methods for manufactured nanomaterials

JTC 1 Information technology

ISO/IEC CD 15026-3

Systems and software engineering — Systems and software assurance — Part 3: System integrity levels

ISO/IEC/IEEE CD 15288

Systems and software engineering — System life cycle processes

ISO/IEC CD 25066

Systems and software engineering — Systems and software Quality Requirements and Evalu-ation (SQuaRE) — Common industry Format for Usability — Evaluation Report

ISO/IEC CD 29110-1

Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview

ISO/IEC CD 29110-2

Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2: Framework and taxonomy

ISO/IEC CD 29110-3-1

Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-1: Capabil-ity assessment guide

ISO/IEC CD 29110-3-2

Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Con-formity Audit Guide

ISO/IEC 18013-3:2009/PDAM 3

Information technology — Personal identifica-tion — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Amendment 3: PACE

ISO/IEC CD 17825

esting methods for the mitigation of non-invasive attack classes against cryptographic modules

ISO/IEC CD 24711

Method for the determination of ink cartridge yield for colour inkjet printers and multi-func-tion devices that contain printer components

ISO/IEC CD 29102

Information technology — Office equipment — Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components

ISO/IEC CD 29167-13

Information technology — Automatic identifica-tion and data capture techniques — Part 13: Air Interface for security services crypto suite Grain-128A

ISO/IEC 19794-6:2011/PDAM 2

Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 2: XML Encoding

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

TC 6 Paper, board and pulps

ISO/DIS 5630-7

* Paper and board — Accelerated ageing — Part 7: Exposure to light

2013-11-24

ISO/DIS 12625-15

* Tissue paper and tissue prod-ucts — Part 15: Determination of optical properties — Meas-urement of brightness and colour with C/2° (indoor daylight) illuminant

2014-01-30

ISO/DIS 12625-16

* Tissue paper and tissue prod-ucts — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflec-tance method

2014-01-30


ISO/DIS 17325-1

* Ships and marine technology — Marine environment protection — Oil booms — Part 1: Design requirements

2013-11-26

TC 17 Steel

ISO/DIS 630-5 * Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

2013-11-09

(Revision of ISO 4952:2006)

ISO/DIS 630-6 * Structural steels — Part 6: Technical delivery conditions for seismic improved structural steels for building

2013-11-09


ISO/DIS 4998 * Continuous hot-dip zinc-coated carbon steel sheet of structural quality

2013-11-06


ISO/DIS 4999 * Continuous hot-dip terne (lead alloy) coated cold-reduced car-bon steel sheet of commercial, drawing and structural qualities

2013-11-06


ISO/DIS 5954 * Cold-reduced carbon steel sheet according to hardness requirements

2013-11-06


ISO/DIS 6932 * Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %

2013-11-06



ISO/DIS 16457 * Space systems — Space envi-ronment (natural and artificial) — The Earth's ionosphere model: international reference iono-sphere (IRI) model and exten-sions to the plasmasphere

2013-11-26

(Revision of ISO/TS 16457:2009)


ISO/DIS 16709 * Realtime solar activity and space environment information for spacecraft operation

2013-11-29

TC 22 Road vehicles

ISO/DIS 17447-1

* Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimen-sions for metal-sheath-type glow-plugs

2013-11-13

(Revision of ISO 6550-1:1994, ISO 6550-2:1994, ISO 6550-3:2009, ISO 7578:2008, ISO 6550-4:2009, ISO/NP 17447)

ISO/DIS 17447-2

* Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimen-sions for ceramic-sheath-type glow-plugs

2013-11-13

(Revision of ISO 6550-1:1994, ISO 6550-2:1994, ISO 6550-3:2009, ISO 7578:2008, ISO 6550-4:2009, ISO/NP 17447)

ISO/DIS 17447-3

* Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements

2013-11-13

TC 24 Particle characterization including sieving

ISO/DIS 17867 * Particle size analysis — Small-angle X-ray scattering

2013-11-13


ISO/DIS 3679 * Determination of flash no-flash and flash point — Rapid equilib-rium closed cup method

2014-01-23

(Revision of ISO 3679:2004, ISO 3680:2004)

TC 29 Small tools

ISO/DIS 12164-3

* Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools

2013-11-29

(Revision of ISO 12164-3:2008)

ISO/DIS 12164-4

* Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools

2013-11-29


TC 34 Food products

ISO/DIS 22004 * Food safety management systems — Guidance on the ap-plication of ISO 22000

2013-11-20

(Revision of ISO/TS 22004:2005)

TC 38 Textiles

ISO/DIS 17617 * Textiles — Determination of moisture drying rate

2013-11-23

TC 43 Acoustics

ISO 3743-2:1994/DAmd 1

* Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms — Amendment 1

2014-01-09

TC 44 Welding and allied processes

ISO/DIS 13469 * Mechanical joining — Form-fit blind rivets and (lock) bolt joints — Specifications and qualifica-tion of testing procedures

2013-11-24

ISO 2503:2009/DAmd 1

* Gas welding equipment — Pres-sure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1

2014-01-09

ISO 5172:2006/DAmd 2

* Gas welding equipment — Blow-pipes for gas welding, heating and cutting — Specifications and tests — Amendment 2

2014-01-09

ISO 5175:1987/DAmd 1

* Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen or compressed air — General specifications, require-ments and tests — Amendment 1

2013-11-09

ISO 7291:2010/DAmd 1

* Gas welding equipment — Pres-sure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) — Amendment 1

2014-01-09


ISO/DIS 16301.2

Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools — Specification

2013-10-06

ISO 2440:1997/DAmd 2

* Flexible and rigid cellular poly-meric materials — Accelerated ageing tests — Amendment 2

2014-01-23

TC 59 Buildings and civil engi-neering works

ISO/DIS 16745 * Environmental performance of buildings — Carbon Metric of a building — Use stage

2013-11-14

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 16961 * Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel stor-age tanks

2014-01-23

ISO/DIS 15551-1

Petroleum and natural gas indus-tries — Drilling ans production equipment — Part 1: Electric submersible pump systems for artificial lift

2014-01-30


ISO/DIS 19901-1

* Petroleum and natural gas indus-tries — Specific requirements for offshore structures — Part 1: Metocean design and operating considerations

2014-01-23


TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/DIS 17099 * Radiation Protection — Perfor-mance criteria for laboratories using the cytokinesis-blocked micronucleus assay in blood lymphocytes for biological dosimetry

2013-11-26

ISO/DIS 18589-3

* Measurement of radioactivity in the environment — Soil — Part 3: Measurement of gamma-emitting radionuclides

2013-11-29


TC 87 Cork

ISO/DIS 20752 * Cork stoppers — Determination of releasable 2, 4, 6-trichloroani-sol (TCA)

2013-11-06


TC 106 Dentistry

ISO/DIS 6872 * Dentistry — Ceramic materials

2014-01-30


TC 107 Metallic and other inorgan-ic coatings

ISO/DIS 4528 * Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles

2014-01-30


TC 121 Anaesthetic and respiratory equipment

ISO/DIS 80601-2-72

* Medical electrical equipment — Part 2-72: Particular require-ments for basic safety and essential performance of home healthcare environment ventila-tors for ventilator-dependent patients

2014-01-23


TC 131 Fluid power systems

ISO/DIS 10766 * Hydraulic fluid power — Cylin-ders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods

2013-11-29


TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 3458 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure

2014-01-23


ISO/DIS 3501 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force

2014-01-23


ISO/DIS 3503 * Plastics piping systems — Me-chanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending

2014-01-23


ISO/DIS 13844 * Plastics piping systems — Elas-tomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

2014-01-23


ISO/DIS 13845 * Plastics piping systems — Elas-tomeric-sealing-ring-type socket joints for use with thermoplastic pipes — Test method for leak-tightness under internal pressure and with angular deflection

2014-01-23


TC 150 Implants for surgery

ISO/DIS 16061 * Instrumentation for use in association with non-active surgical implants — General requirements

2014-01-23


TC 171 Document management applications

ISO/DIS 24517-2

* Document management — Engi-neering document format using PDF — Part 2: Use of 32000-2 including support for long-term preservation (PDF/E-2)

2013-11-22

TC 173 Assistive products for per-sons with disability

ISO/DIS 17069 * Accessible design — Considera-tion and assistive products for accessible meeting

2013-11-06

TC 182 Geotechnics

ISO/DIS 18674 * Geotechnical investigation and testing — Geotechnical monitor-ing by field instrumentation — General rules

2014-01-09

TC 184 Automation systems and integration

ISO/DIS 22400-1

* Automation systems and integration — Key performance indicators (KPIs) for manufactur-ing operations management — Part 1: Overview, concepts and terminology

2013-11-22

TC 199 Safety of machinery

ISO 13849-1:2006/DAmd 1

* Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design — Amendment 1

2014-01-30

ISO/DIS 14120 * Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards

2014-01-23


TC 204 Intelligent transport systems

ISO/DIS 12855 * Electronic fee collection — Infor-mation exchange between ser-vice provision and toll charging

2014-01-30

(Revision of ISO 12855:2012, ISO 12855:2012/Cor 1:2013)


TC 206 Fine ceramics

ISO/DIS 17138 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength

2013-11-10

ISO/DIS 17139 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic compos-ites — Thermophysical proper-ties — Determination of thermal expansion

2013-11-10

ISO/DIS 17140 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Mechanical properties of ceramic composites at room temperature — Determination of fatigue properties at constant amplitude

2013-11-10

ISO/DIS 17142 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure — Determination of fatigue properties at constant amplitude

2013-11-10

ISO/DIS 17161 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Ceramic composites — Guide to the determination of the degree of misalignment in uniaxial mechanical tests

2013-11-10

ISO/DIS 17170 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for sphere indentation of porous ceramics

2013-11-14

ISO/DIS 20507 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Vocabulary

2013-11-15


TC 210 Quality management and corresponding general as-pects for medical devices

ISO/DIS 80369-20

* Small-bore connectors for liquids and gases in healthcare applica-tions — Part 20: Common test methods

2014-01-23

TC 211 Geographic information/Geomatics

ISO/DIS 19135-1

* Geographic information — Pro-cedures for item registration — Part 1: Fundamentals

2014-01-30


TC 218 Timber

ISO/DIS 13061-1.2

* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 1: Determination of moisture con-tent for physical and mechanical tests

2013-10-09


ISO/DIS 13061-2.2

* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 2: Determination of density for physical and mechanical tests

2013-10-09


ISO/DIS 13061-3.2

* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 3: Determination of ultimate strength in static bending

2013-10-09


ISO/DIS 13061-4.2

* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 4: Determination of modulus of elasticity in static bending

2013-10-09


ISO/DIS 13061-6.2

* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 6: Determination of ultimate tensile stress parallel to grain

2013-10-09


ISO/DIS 13061-7.2

* Physical and mechanical proper-ties of wood - Test methods for small clear specimen — Part 7: Determination of ultimate tensile stress perpendicular to grain

2013-10-09


ISO/DIS 17959 * General requirements for solid wood flooring

2013-11-06

TC 223 Societal security

ISO/DIS 22315 * Societal security — Mass evacu-ation — Guidelines for planning

2013-11-24

ISO/DIS 22397 * Societal security — Guidelines for establishing partnering arrangements

2013-11-24

TC 228 Tourism and related services

ISO/DIS 17680 * Thalassotherapy — Service requirements

2013-11-20


ISO/IEC DIS 33001

* Information technology — Pro-cess assessment — Concepts and terminology

2013-11-24

ISO/IEC DIS 33002

* Information Technology — Pro-cess Assessment — Require-ments for performing process assessment

2013-11-24

ISO/IEC DIS 33003

* Information technology — Pro-cess assessment — Require-ments for process measurement frameworks

2013-11-24

ISO/IEC DIS 33004

* Information technology — Pro-cess assessment — Require-ments for process reference, process assessment and matu-rity models

2013-11-24

ISO/IEC DIS 33020

* Information technology — Pro-cess assessment — Process measurement framework for as-sessment of process capability

2013-11-24

ISO/IEC DIS 30100-3

* Information technology — Home network resource manage-ment — Part 3: Management applications

2013-11-14


ISO/IEC DIS 18014-4

* Information technology — Secu-rity techniques — Time-stamping services — Part 4: Traceability of time sources

2013-11-14

ISO/IEC 14496-4:2004/DAmd 41

* Information technology — Cod-ing of audio-visual objects — Part 4: Conformance testing — Amendment 41: Conformance testing of MVC plus depth exten-sion of AVC

2013-11-29

ISO/IEC DIS 29167-1

* Information technology — Au-tomatic identification and data capture techniques — Part 1: Security services for RFID air interfaces

2013-11-10

(Revision of ISO/IEC 29167-1:2012)

ISO/IEC DIS 29167-11

* Information technology — Au-tomatic identification and data capture techniques — Part 11: Air Interface for security services crypto suite PRESENT-80

2013-11-10

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 6 Paper, board and pulps

ISO/FDIS 535 * Paper and board — Determina-tion of water absorptiveness — Cobb method

2013-11-23


TC 21 Equipment for fire protec-tion and fire fighting

ISO/FDIS 6182-1

* Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers

2013-10-08



ISO/FDIS 12934

* Tractors and machinery for agriculture and forestry — Basic types — Vocabulary

2013-10-03


ISO/FDIS 8311 * Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Calibration of membrane tanks and independ-ent prismatic tanks in ships — Manual and internal electro-opti-cal distance-ranging methods

2013-10-09


TC 38 Textiles

ISO/FDIS 2076 * Textiles — Man-made fibres — Generic names


ISO/FDIS 13934-2

* Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method

2013-11-30


TC 41 Pulleys and belts (including veebelts)

ISO/FDIS 11749

* Belt drive — V-ribbed belts for the automotive industry — Fa-tigue test

2013-10-27

(Revision of ISO 11749:1995, ISO 11749:1995/Cor 1:2003)


ISO 9539:2010/FDAmd 1

* Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes — Amendment 1

2013-10-09

ISO/FDIS 10225

* Gas welding equipment — Marking for equipment used for gas welding, cutting and allied processes

2013-10-03

TC 54 Essential oils

ISO/FDIS 9235 * Aromatic natural raw materials — Vocabulary

2013-10-16


TC 58 Gas cylinders

ISO/FDIS 10462

* Gas cylinders — Acetylene cylin-ders — Periodic inspection and maintenance

2013-10-23


TC 61 Plastics

ISO/FDIS 306 * Plastics — Thermoplastic ma-terials — Determination of Vicat softening temperature (VST)


ISO/FDIS 29221

* Plastics — Determination of mode I plane-strain crack-arrest toughness

2013-10-16

ISO/FDIS 15791-1

* Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

2013-10-30


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 11960

* Petroleum and natural gas indus-tries — Steel pipes for use as casing or tubing for wells

2013-11-30


TC 94 Personal safety -- Pro-tective clothing and equipment


ISO/FDIS 17491-5

* Protective clothing - Test meth-ods for clothing providing pro-tection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)

2013-10-07


TC 106 Dentistry

ISO/FDIS 17304

* Dentistry — Polymerization shrinkage: Method for determi-nation of polymerization shrink-age of polymer-based restorative materials


ISO/FDIS 27427

* Anaesthetic and respiratory equipment — Nebulizing sys-tems and components

2013-10-24


TC 130 Graphic technology

ISO/FDIS 12647-1

* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods

2013-10-20


ISO/FDIS 12647-2

* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes

2013-10-20

(Revision of ISO 12647-2:2004, ISO 12647-2:2004/Amd 1:2007)

ISO/FDIS 12647-3

* Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint

2013-10-20


ISO/FDIS 15397

Graphic technology — Com-munication of graphic paper properties

2013-10-30

TC 135 Non-destructive testing

ISO/FDIS 5579 * Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules

2013-10-16



ISO/FDIS 15309

* Implants for surgery — Differen-tial scanning calorimetry of poly ether ether ketone (PEEK) poly-mers and compounds for use in implantable medical devices

2013-10-21


ISO/FDIS 14577-1

* Metallic materials — Instrument-ed indentation test for hardness and materials parameters — Part 1: Test method

2013-10-16


ISO/FDIS 14577-2

* Metallic materials — Instrument-ed indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines

2013-10-16


ISO/FDIS 14577-3

* Metallic materials — Instrument-ed indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks

2013-10-16


TC 201 Surface chemical analysis

ISO/FDIS 18115-1

* Surface chemical analysis — Vocabulary — Part 1: Gen-eral terms and terms used in spectroscopy

2013-10-07

(Revision of ISO 18115-1:2010, ISO 18115-1:2010/DAmd 1)

ISO/FDIS 18115-2

* Surface chemical analysis — Vo-cabulary — Part 2: Terms used in scanning-probe microscopy

2013-10-07

(Revision of ISO 18115-2:2010, ISO 18115-2:2010/DAmd 1)

TC 202 Microbeam analysis

ISO/FDIS 15932

* Microbeam analysis — Ana-lytical electron microscopy — Vocabulary

2013-10-23

TC 211 Geographic information/Geomatics

ISO/FDIS 19157

* Geographic information — Data quality

2013-10-09

(Revision of ISO 19113:2002, ISO 19114:2003, ISO/TS 19138:2006)

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/FDIS 10360-8

* Geometrical product specifica-tions (GPS) — Acceptance and reverification tests for coordi-nate measuring systems (CMM) — Part 8: CMMs with optical distance sensors

2013-10-16

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 11646

* Leather — Measurement of area

2013-10-16



ISO/IEC/IEEE 8802-11:2012/FDAmd 1

* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 1: Prioritization of management frames (adoption of IEEE Std 802-11ae-2012)

2014-01-29



* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) speci-fications — Amendment 2: MAC enhancements for robust audio video streaming (adoption of IEEE Std 802.11aa-2012)

2014-01-29


* Information technology — Tele-communications and information exchange between systems — Local and metropolitan area net-works — Specific requirements — Part 11: Wireless LAN me-dium access control (MAC) and physical layer (PHY) specifica-tions — Amendment 3: Enhance-ments for very high throughput in the 60 GHz band (adoption of IEEE Std 802.11ad-2012)

2014-01-29

ISO/IEC FDIS 9594-1

* Information technology — Open Systems Interconnection — The Directory — Part 1: Overview of concepts, models and services

2013-10-23

(Revision of ISO/IEC 9594-1:2008, ISO/IEC 9594-1:2008/DAmd 2, ISO/IEC 9594-1:2008/DAmd 1, ISO/IEC 9594-1:2008/DAmd 3)

ISO/IEC FDIS 9594-2

* Information technology — Open Systems Interconnection — The Directory — Part 2: Models

2013-10-23

(Revision of ISO/IEC 9594-2:2008, ISO/IEC 9594-2:2008/DAmd 2, ISO/IEC 9594-2:2008/DAmd 1, ISO/IEC 9594-2:2008/Cor 1:2011, ISO/IEC 9594-2:2008/DAmd 3, ISO/IEC 9594-2:2008/Cor 2:2012)

ISO/IEC FDIS 9594-3

* Information technology — Open Systems Interconnection — The Directory — Part 3: Abstract service definition

2013-10-23

(Revision of ISO/IEC 9594-3:2008, ISO/IEC 9594-3:2008/DAmd 2, ISO/IEC 9594-3:2008/DAmd 1, ISO/IEC 9594-3:2008/Cor 1:2011, ISO/IEC 9594-3:2008/DAmd 3, ISO/IEC 9594-3:2008/Cor 2:2012)

ISO/IEC FDIS 9594-4

* Information technology — Open Systems Interconnection — The Directory — Part 4: Procedures for distributed operation

2013-10-23

(Revision of ISO/IEC 9594-4:2008, ISO/IEC 9594-4:2008/DAmd 2, ISO/IEC 9594-4:2008/DAmd 1, ISO/IEC 9594-4:2008/Cor 1:2011)

ISO/IEC FDIS 9594-5

* Information technology — Open Systems Interconnection — The Directory — Part 5: Protocol specifications

2013-10-23

(Revision of ISO/IEC 9594-5:2008, ISO/IEC 9594-5:2008/DAmd 2, ISO/IEC 9594-5:2008/DAmd 1, ISO/IEC 9594-5:2008/Cor 1:2011, ISO/IEC 9594-5:2008/Cor 2:2012)

ISO/IEC FDIS 9594-6

* Information technology — Open Systems Interconnection — The Directory — Part 6: Selected at-tribute types

2013-10-23

(Revision of ISO/IEC 9594-6:2008, ISO/IEC 9594-6:2008/DAmd 2, ISO/IEC 9594-6:2008/DAmd 1, ISO/IEC 9594-6:2008/Cor 1:2011, ISO/IEC 9594-6:2008/DAmd 3, ISO/IEC 9594-6:2008/Cor 2:2012, ISO/IEC 9594-6:2008/Cor 3:2013)

ISO/IEC FDIS 9594-7

* Information technology — Open Systems Interconnection — The Directory — Part 7: Selected object classes

2013-10-23

(Revision of ISO/IEC 9594-7:2008, ISO/IEC 9594-7:2008/DAmd 2, ISO/IEC 9594-7:2008/DAmd 1, ISO/IEC 9594-7:2008/DAmd 3, ISO/IEC 9594-7:2008/Cor 1:2012)

ISO/IEC FDIS 9594-8

* Information technology — Open Systems Interconnection — The Directory — Part 8: Public-key and attribute certificate frameworks

2013-10-23

(Revision of ISO/IEC 9594-8:2008, ISO/IEC 9594-8:2008/DAmd 2, ISO/IEC 9594-8:2008/DAmd 1, ISO/IEC 9594-8:2008/Cor 1:2011, ISO/IEC 9594-8:2008/DAmd 3, ISO/IEC 9594-8:2008/Cor 2:2012, ISO/IEC 9594-8:2008/Cor 3:2013)

ISO/IEC FDIS 9594-9

* Information technology — Open Systems Interconnection — The Directory — Part 9: Replication

2013-10-23

(Revision of ISO/IEC 9594-9:2008, ISO/IEC 9594-9:2008/DAmd 2, ISO/IEC 9594-9:2008/DAmd 1, ISO/IEC 9594-9:2008/Cor 1:2011)

ISO/IEC FDIS 18025

* Information technology — Envi-ronmental Data Coding Specifi-cation (EDCS)

2013-10-17

(Revision of ISO/IEC 18025:2005)

ISO/IEC FDIS 19775-1

* Information technology — Com-puter graphics, image process-ing and environmental data representation — Extensible 3D (X3D) — Part 1: Architecture and base components

2013-10-17

(Revision of ISO/IEC 19775-1:2008)


* Information technology — Secu-rity techniques — Anonymous entity authentication — Part 2: Mechanisms based on signa-tures using a group public key

2013-10-23


* Information technology — Se-curity techniques — Information security for supplier relation-ships — Part 3: Guidelines for information and communication technology supply chain security

2013-10-06

ISO/IEC 19794-2:2011/FDAmd 1

* Information technology — Bio-metric data interchange formats — Part 2: Finger minutiae data — Amendment 1: Conformance testing methodology and clarifi-cation of defects

2013-10-29


Standards published

New International Standards published between 01 August and 31 August 2013


** French version of standard previously published in English only

Price

group

TC 4 Rolling bearings

ISO 1206:2001/Amd 1:2013

Rolling bearings — Needle roller bear-ings, dimension series 48, 49 and 69 — Boundary dimensions and toler-ances — Amendment 1: Tolerances for shaft raceway

XZ

ISO 10317:2008/Amd 1:2013

Rolling bearings — Tapered roller bear-ings — Designation system — Amend-ment 1: Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings

XZ


ISO 18421:2013

* Ships and marine technology — In-land navigation vessels — Lifebuoy housings

C


ISO 14186:2013

* Air cargo — Fire containment covers — Design, performance and testing requirements

M

TC 22 Road vehicles

ISO 19072-2:2013

* Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements

K

ISO 13044-2:2013

* Road vehicles — Fully automatic cou-pling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface

N

TC 23 Tractors and machinery for agri-culture and forestry

ISO 5395-1:2013

Garden equipment — Safety require-ments for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests

T

ISO 5395-2:2013

Garden equipment — Safety require-ments forcombustion-engine-powered lawn-mowers — Part 2: Pedestrian-con-trolled lawnmowers

Q

ISO 5395-3:2013

Garden equipment — Safety require-ments for combustion-engine-powered lawn-mowers — Part 3: Ride-on lawnmow-ers with seated operator

S

ISO 10517:2009/Amd 1:2013

Powered hand-held hedge trimmers — Safety — Amendment 1

XZ

TC 24 Particle characterization includ-ing sieving

ISO 20998-2:2013

* Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory

P

ISO 3310-2:2013

* Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate

E


ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications

J

TC 29 Small tools

ISO 3338-2:2013

* Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks

C

ISO 8404:2013 * Tools for moulding — Angle pins

B

ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions

G

ISO 7755-1:2013

Hardmetal burrs — Part 1: General specifications

D

ISO 7755-2:2013

Hardmetal burrs — Part 2: Cylindrical burrs (style A)

B

ISO 7755-3:2013

Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)

B

ISO 7755-4:2013

Hardmetal burrs — Part 4: Spherical burrs (style D)

B

ISO 7755-5:2013

Hardmetal burrs — Part 5: Oval burrs (style E)

B

ISO 7755-6:2013

Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)

B

ISO 7755-7:2013

Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)

B

ISO 7755-8:2013

Hardmetal burrs — Part 8: Flame burrs (style H)

B

ISO 7755-9:2013

Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)

B


ISO 7755-10:2013

Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)

B

ISO 7755-11:2013

Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)

B

ISO 7755-12:2013

Hardmetal burrs — Part 12: Inverted cone burrs (style N)

B

TC 33 Refractories

ISO 16334:2013

Monolithic refractory products — De-termination of resistance to explosive spalling

B

TC 34 Food products

ISO 9622:2013 Milk and liquid milk products — Guide-lines for the application of mid-infrared spectrometry

G

ISO 4833-1:2013

Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 1: Colony count at 30 degrees C by the pour plate technique

E

ISO 4833-2:2013

Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 2: Colony count at 30 degrees C by the surface plating technique

F

TC 35 Paints and varnishes

ISO 11997-2:2013

Paints and varnishes — Determina-tion of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light

D

ISO 15528:2013

Paints, varnishes and raw materials for paints and varnishes — Sampling

F

TC 36 Cinematography

ISO 4241:2013 * Cinematography — Projection leader (time-based), trailer and cue marks — Specifications

F


ISO 9692-1:2013

Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels

G


ISO/TS 17796:2013

Rubber — Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection

G

ISO 17278:2013

* Rubber, raw natural — Determination of the gel content of technically speci-fied rubber (TSR)

D

ISO 5999:2013 Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification

J

TC 46 Information and documentation

ISO 2789:2013 * Information and documentation — International library statistics

W

ISO 27729:2012/Cor 1:2013

* Information and documentation — International standard name identifier (ISNI) — Technical Corrigendum 1

free

TC 58 Gas cylinders

ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing

N

ISO 12209:2013

* Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air

J

TC 60 Gears

ISO 1328-1:2013

Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of de-viations relevant to flanks of gear teeth

T

TC 61 Plastics

ISO 4892-3:2013

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

H

ISO 4892-4:2013

* Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

E

TC 63 Glass containers

ISO 12821:2013

* Glass packaging — 26 H 180 crown finish — Dimensions

C

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 12211:2012

Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers

R

ISO 12212:2012

Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers

S

ISO 13705:2012

Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service

XC

TC 69 Applications of statistical methods

ISO 22514-2:2013

* Statistical methods in process man-agement — Capability and perfor-mance — Part 2: Process capability and performance of time-dependent process models

L

ISO 3951-1:2013

* Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

X


ISO 3951-2:2013

* Sampling procedures for inspection by variables — Part 2: General specifica-tion for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics

X

TC 70 Internal combustion engines

ISO 4548-13:2013

Methods of test for full-flow lubricating oil filters for internal combustion en-gines — Part 13: Static burst pressure test for composite filter housings

C

TC 92 Fire safety

ISO 29904:2013

Fire chemistry — Generation and measurement of aerosols

W

TC 93 Starch (including derivatives and by-products)

ISO 5379:2013 * Starches and derived products — De-termination of sulfur dioxide content — Acidimetric method and nephelometric method

E

ISO 10504:2013

* Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance liquid chromatography

D

TC 94 Personal safety -- Protective clothing and equipment

ISO 12312-1:2013

Eye and face protection — Sunglasses and related eyewear — Part 1: Sun-glasses for general use

L

TC 106 Dentistry

ISO 21563:2013

Dentistry — Hydrocolloid impression materials

S

TC 108 Mechanical vibration, shock and condition monitoring

ISO 21940-31:2013

* Mechanical vibration — Rotor balanc-ing — Part 31: Susceptibility and sensi-tivity of machines to unbalance

K

ISO 20958:2013

Condition monitoring and diagnostics of machine systems — Electrical signa-ture analysis of three-phase induction motors

M

TC 110 Industrial trucks

ISO 3691-1:2011/Cor 1:2013

Industrial trucks — Safety require-ments and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Technical Corrigendum 1

free

ISO 3691-6:2013

Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers

M

TC 118 Compressors and pneumatic tools, machines and equipment

ISO 11011:2013

Compressed air — Energy efficiency — Assessment

U

TC 120 Leather

ISO 5433:2013 * Leather — Bovine wet blue — Specification

C


IEC 80601-2-30:2009/Amd 1:2013

* Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmoma-nometers — Amendment 1

XZ

TC 122 Packaging

ISO 13274:2013

Packaging — Transport packaging for dangerous goods — Plastics compat-ibility testing for packaging and IBCs

N

ISO 16495:2013

Packaging — Transport packaging for dangerous goods — Test methods

U

TC 126 Tobacco and tobacco products

ISO 20774:2013

Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney

L

TC 127 Earth-moving machinery

ISO 6747:2013 Earth-moving machinery — Doz-ers — Terminology and commercial specifications

P

TC 135 Non-destructive testing

ISO 16811:2012

Non-destructive testing — Ultrasonic testing — Sensitivity and range setting

R

TC 147 Water quality

ISO 13164-1:2013

* Water quality — Radon-222 — Part 1: General principles

M

ISO 13164-2:2013

Water quality — Radon-222 — Part 2: Test method using gamma-ray spectrometry

G

ISO 13164-3:2013

Water quality — Radon-222 — Part 3: Test method using emanometry

L

TC 153 Valves

ISO 10631:2013

Metallic butterfly valves for general purposes

H

TC 156 Corrosion of metals and alloys

ISO/TR 16335:2013

* Corrosion of metals and alloys — Cor-rosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification

J


ISO 20032:2013

* Method for evaluation of tensile prop-erties of metallic superplastic materials

F

TC 182 Geotechnics

ISO 14688-1:2002/Amd 1:2013

* Geotechnical investigation and test-ing — Identification and classification of soil — Part 1: Identification and description — Amendment 1

XZ


ISO 14688-2:2004/Amd 1:2013

* Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classifi-cation — Amendment 1

XZ

TC 188 Small craft

ISO 10088:2013

Small craft — Permanently installed fuel systems

H

TC 190 Soil quality

ISO 11916-1:2013

Soil quality — Determination of select-ed explosives and related compounds — Part 1: Method using high-perfor-mance liquid chromatography (HPLC) with ultraviolet detection

M

ISO 11916-2:2013

Soil quality — Determination of select-ed explosives and related compounds — Part 2: Method using gas chroma-tography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)

M

ISO/TS 16727:2013

* Soil quality — Determination of mercu-ry — Cold vapour atomic fluorescence spectrometry (CVAFS)

C

ISO/TS 16965:2013

* Soil quality — Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)

G

ISO 29200:2013

Soil quality — Assessment of geno-toxic effects on higher plants — Vicia faba micronucleus test

J

TC 204 Intelligent transport systems

ISO/TS 15638-6:2013

* Intelligent transport systems --- Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 6: Regu-lated applications

S

ISO/TS 15638-8:2013

* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 8: Vehi-cle access monitoring (VAM)

T

ISO/TS 15638-11:2013

* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 11: Driver work records (work and rest hours compliance) (DWR)

U

ISO/TS 15638-12:2013

* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 12: Vehicle mass monitoring (VMM)

U

ISO/TS 15638-14:2013

* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 14: Vehicle access control (VAC)

T

ISO/TS 15638-15:2013

* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 15: Vehi-cle location monitoring (VLM)

T

ISO/TS 15638-16:2013

* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 16: Vehicle speed monitoring (VSM)

U

ISO/TS 15638-17:2013

* Intelligent transport systems — Frame-work for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM)

T

ISO/TR 24014-2:2013

* Public transport — Interoperable fare management system — Part 2: Busi-ness practices

M

TC 213 Dimensional and geometrical product specifications and verification

ISO 286-2:2010/Cor 1:2013

Geometrical product specifications (GPS) — ISO code system for toler-ances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1

free

ISO 14253-1:2013

Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equip-ment — Part 1: Decision rules for prov-ing conformity or nonconformity with specifications

H

ISO/TS 15530-1:2013

Geometrical product specifications (GPS) — Coordinate measuring ma-chines (CMM): Technique for determin-ing the uncertainty of measurement — Part 1: Overview and metrological characteristics

G

ISO 16610-85:2013

Geometrical product specifications (GPS) — Filtration — Part 85: Morpho-logical areal filters: Segmentation

M

TC 226 Materials for the production of primary aluminium

ISO 2926:2013 * Aluminium oxide used for the produc-tion of primary aluminium — Particle size analysis for the range 45 µm to 150 µm — Method using electroformed sieves

E

TC 228 Tourism and related services

ISO/TR 21102:2013

* Adventure tourism — Leaders — Per-sonnel competence

D

TMB Technical Management Board

ISO/IEC Guide 98-4:2012

Uncertainty of measurement — Part 4: Role of measurement uncertainty in conformity assessment

T


ISO/IEC 25064:2013

* Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: User needs report

L

ISO/IEC 26550:2013

* Software and systems engineering — Reference model for product line engineering and management

Q

ISO/IEC/IEEE 29119-1:2013

* Software and systems engineering — Software testing — Part 1: Concepts and definitions

U


* Software and systems engineer-ing — Software testing — Part 2: Test processes

U



* Software and systems engineer-ing — Software testing — Part 3: Test documentation

XB

ISO/IEC TR 29154:2013

* Software engineering — Guide for the application of ISO/IEC 24773:2008 (Certification of software engineer-ing professionals — Comparison framework)

G

ISO/IEC 10373-3:2010/Cor 1:2013

* Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices — Technical Corrigendum 1

free

ISO/IEC 10373-6:2011/Cor 1:2013

* Identification cards — Test methods — Part 6: Proximity cards — Technical Corrigendum 1: R2 value range, start of PICC transmission and program for EMD level measurement

free

ISO/IEC/IEEE 9945:2009/Cor 1:2013

* Information technology — Portable Operating System Interface (POSIX®) Base Specifications, Issue 7 — Techni-cal Corrigendum 1

free

ISO/IEC 14496-5:2001/Amd 24:2009/Cor 2:2013

* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 24: Reference software for AAC-ELD — Technical Corrigendum 2

free

ISO/IEC 14496-10:2012/Cor 1:2013

* Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Technical Corrigendum 1

free

ISO/IEC 14496-12:2012/Cor 1:2013

* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 1

free

ISO/IEC 14496-26:2010/Cor 7:2013

* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigen-dum 7

free

ISO/IEC 14496-28:2012/Cor 1:2013

* Information technology — Coding of audio-visual objects — Part 28: Com-posite font representation — Technical Corrigendum 1

free

ISO/IEC 23003-3:2012/Cor 2:2013

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Cor-rigendum 2

free

ISO/IEC 23005-3:2013/Cor 1:2013

* Information technology — Media context and control — Part 3: Sensory information — Technical Corrigendum 1

free

ISO/IEC 24730-62:2013

* Information technology — Real time lo-cating systems (RTLS) — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface

U

Standards confirmed

The following International Standards are confimred for a five year period:

TC 2 Fasteners

ISO 8734:1997 (reconfirmed)












ISO 14620-3:2005 (reconfirmed)






TC 27 Solid mineral fuels









ISO/TR 3666:1998 (reconfirmed)










ISO 20763:2004



TC 34 Food products

ISO/TS 16634-2:2009

ISO/TS 17996:2006

(reconfirmed)

TC 38 Textiles





TC 60 Gears


TC 61 Plastics




















TC 96 Cranes



ISO 1925:2001

ISO 1940-1:2003

TC 127 Earth-moving machinery

ISO 6015:2006

ISO 6016:2008




ISO 9249:2007

ISO 10265:2008


ISO 10567:2007

ISO 14397-1:2007

ISO 14397-2:2007

ISO 16754:2008

TC 159 Ergonomics


TC 168 Prosthetics and orthotics


TC 186 Cutlery and table and decorative metal hollow-ware









TC 194 Biological evaluation of medical devices

ISO 10993-14:2001

(reconfirmed)

ISO 10993-15:2000

(reconfirmed)

Standards withdrawn



ISO 5395:1990 (replaced by ISO 5395-1:2013, ISO 5395-2:2013, ISO 5395-3:2013)

ISO 5395:1990/Amd 1:1992

(replaced by ISO 5395-1:2013, ISO 5395-2:2013, ISO 5395-3:2013)

TC 34 Food products

ISO 4833:2003 (replaced by ISO 4833-1:2013, ISO 4833-2:2013)

TC 58 Gas cylinders

ISO 3807-1:2000 (replaced by ISO 3807:2013)





TC 69 Applications of statistical methods

ISO 21747:2006 (replaced by ISO 22514-2:2013)

TC 106 Dentistry

ISO 1563:1990 (replaced by ISO 21563:2013)




ISO 10814:1996 (replaced by ISO 21940-31:2013)

TC 122 Packaging





Meeting calendar

(update at 01 August 2013)

Meetings called for the month of July are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

September 2013

1-4 Moscow (Rus-sian Federation)

TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components

3-6 Hangzhou (China)

TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes


4 Geneva (Switzerland)

CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

8-13 Suzhou (China) TC 61 Plastics

9 Victoria (Canada) TC 33 Refractories

9 Oslo (Norway) TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels


JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

9-10 London (United Kingdom)

TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

9-10 Paris (France) TC 26 Copper and copper alloys


TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water

9-11 Gaithersburg (USA)

TC 172/SC 9 Optics and photon-ics/Electro-optical systems

9-13 Delft (Netherlands)

JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

9-13 Edmonton (Canada)

TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment

9-13 Montreal (Canada)

TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock

9-13 Tallberg (Sweden)

TC 258 Project, programme and portfolio management

10 London (United Kingdom)

TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

10 Suzhou (China) TC 61/SC 1 Plastics/Terminology

10 Paris (France) TC 79/SC 11 Light metals and their alloys/Titanium

10-13 Stockholm (Sweden)

TC 205 Building environment design


TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems


TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components

11 Suzhou (China) TC 61/SC 2 Plastics/Mechanical properties

11 Suzhou (China) TC 61/SC 5 Plastics/Physical-chemical properties

11 Suzhou (China) TC 61/SC 10 Plastics/Cellular plastics

11 Suzhou (China) TC 61/SC 11 Plastics/Products

11 Suzhou (China) TC 61/SC 12 Plastics/Thermoset-ting materials

11 Paris (France) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

11 Stockholm (Sweden)

TC 163/SC 2 Thermal performance and energy use in the built environment/Cal-culation methods


TC 163/SC 3 Thermal performance and energy use in the built environment/Thermal insulation products


TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)


TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers

12 Suzhou (China) TC 61/SC 4 Plastics/Burning behaviour

12 Suzhou (China) TC 61/SC 6 Plastics/Ageing, chemical and environ-mental resistance

12 Suzhou (China) TC 61/SC 9 Plastics/Thermoplas-tic materials

12 Suzhou (China) TC 61/SC 13 Plastics/Composites and reinforcement fibres

12 Paris (France) TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

12 Paris (France) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys


TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)


TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals

12 Vienna (Austria) TC 146/SC 3 Air quality/Ambient atmospheres


TC 163/SC 1 Thermal performance and energy use in the built environment/Test and measurement methods


TC 163 Thermal performance and energy use in the built environment



TC 21 Equipment for fire protection and fire fighting

13 Singapore (Singapore)

TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

13 Paris (France) TC 79 Light metals and their alloys


TC 119 Powder metallurgy


TC 119/SC 5 Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals)

13 Vienna (Austria) TC 146/SC 5 Air quality/Meteorology

13 Vienna (Austria) TC 146/SC 6 Air quality/Indoor air

13 Munich (Germany)

TC 244 Industrial furnaces and associated pro-cessing equipment

16-17 St. Peters-burg (Russian Federation)

DEVCO Committee on developing countries matters


TMB Technical Manage-ment Board

16-20 Copenhagen (Denmark)

TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures



16-20 Fukuoka (Japan) TC 190 Soil quality

17 Fukuoka (Japan) TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

17 Paris (France) TC 254 Safety of amusement rides and amusement devices

17-18 Jiangyin (China) TC 105 Steel wire ropes

17-18 Belo Horizonte (Brazil)

TC 155 Nickel and nickel alloys

17-19 Tokyo (Japan) JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

17-19 Velsen (Netherlands)

TC 164/SC 5 Mechanical testing of metals/Fatigue testing

17-19 Chengdu (China) TC 256 Pigments, dyestuffs and extenders

18 St. Peters-burg (Russian Federation)

CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

18 Velsen (Netherlands)

TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

18-19 Velsen (Netherlands)

TC 164/SC 2 Mechanical testing of metals/Ductility testing


GA General Assembly

18-20 Shanghai (China) TC 232 Learning services outside formal education

19 Atlanta (USA) TC 142 Cleaning equipment for air and other gases


TC 164/SC 3 Mechanical testing of metals/Hardness testing

19 Fukuoka (Japan) TC 190/SC 4 Soil quality/Biological methods

19-20 Graz (Austria) TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

20 Brescia (Italy) TC 22/SC 25 Road vehicles/Vehi-cles using gaseous fuels


TC 164/SC 1 Mechanical testing of metals/Uniaxial testing

20 Fukuoka (Japan) TC 190/SC 2 Soil quality/Sampling

20 Fukuoka (Japan) TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

20 Fukuoka (Japan) TC 190/SC 7 Soil quality/Soil and site assessment

21 St. Peters-burg (Russian Federation)

COUNCIL Council

23 San Remo (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts

23-24 Paris (France) PC 277 Sustainable purchasing

23-27 Kobe (Japan) JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

23-27 Milan (Italy) TC 120 Leather

23-27 Milan (Italy) TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts

23-27 Milan (Italy) TC 120/SC 2 Leather/Tanned leather

23-27 Milan (Italy) TC 120/SC 3 Leather/Leather products

23-27 Vienna (Austria) TC 218 Timber

23-27 Chicago (USA) TC 262 Risk management

24-25 Beijing (China) TC 265 Carbon dioxide capture, transporta-tion, and geological storage

24-26 Gaithersburg (USA)

TC 172/SC 1 Optics and photon-ics/Fundamental standards

25-26 Oslo (Norway) TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

25-27 Tokyo (Japan) TC 267 Facilities management

26 Freiburg (Germany)

TC 180/SC 1 Solar energy/Climate - Measurement and data



TC 180/SC 4 Solar energy/Systems - Thermal perfor-mance, reliability and durability

26-27 Rotterdam (Netherlands)

TC 260 Human resource management

26-27 Toulouse (France)

TC 264 Fireworks

27 Seoul (Korea, Republic of)

TC 44/SC 12 Welding and allied processes/Soldering materials

27 Bromont (Québec) (Canada)

TC 153/SC 1 Valves/Design, manu-facture, marking and testing


TC 180 Solar energy

27 Helsinki (Finland) TC 213 Dimensional and geometrical product specifications and verification

29 Jeju (Korea, Republic of)

TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry

September-October 2013

30-4 Kista (Stock-holm) (Sweden)

JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment


PC 248 Project committee: Sustainability criteria for bioenergy

30-1 Tampere (Finland)

TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery

30-2 Berlin (Germany) TC 34/SC 15 Food products/Coffee


TC 148 Sewing machines

October 2013

2-3 Tampere (Finland)

TC 23/SC 15 Tractors and machin-ery for agriculture and forestry/Machinery for forestry

2-3 St. John, Newfoundland (Canada)

TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations

3-4 Chantilly (USA) TC 58/SC 2 Gas cylinders/Cylin-der fittings

5 Incheon (Korea, Republic of)

TC 106 Dentistry

6-11 Kobe (Japan) TC 204 Intelligent transport systems

7 Berlin (Germany) TC 10/SC 10 Technical product documentation/Process plant documentation

7 Istanbul (Turkey) TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

7-8 Milan (Italy) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

7-8 Sparks, Nevada (USA)

TC 209 Cleanrooms and as-sociated controlled environments


TC 238 Solid biofuels

7-9 Tokyo (Japan) TC 70 Internal combustion engines

7-9 Tokyo (Japan) TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

7-9 Istanbul (Turkey) TC 126 Tobacco and tobacco products

7-10 Paris (France) JPC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology

7-11 Beijing (China) CASCO Committee on con-formity assessment

7-11 Cambridge, Massachusetts (USA)

TC 121/SC 4 Anaesthetic and res-piratory equipment/Terminology and semantics

7-11 Oslo (Norway) TC 138 Plastics pipes, fittings and valves for the transport of fluids

7-11 Colorado Springs (USA)

TC 247 Fraud countermeas-ures and controls

8 Istanbul (Turkey) TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

8 Boulder (USA) TC 202/SC 1 Microbeam analysis/Terminology

8-9 Berlin (Germany) TC 263 Coalbed methane (CBM)

8-10 Berlin (Germany) TC 59/SC 8 Buildings and civil engineering works/Sealants

8-10 Boulder (USA) TC 202 Microbeam analysis

9 Istanbul (Turkey) TC 38/SC 23 Textiles/Fibres and yarns

9 Oslo (Norway) TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

9 Oslo (Norway) TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications

9 Boulder (USA) TC 202/SC 2 Microbeam analy-sis/Electron probe microanalysis

9 Boulder (USA) TC 202/SC 3 Microbeam analysis/Analytical electron microscopy

9-10 Seogwipo-si (Korea, Repub-lic of)

TC 159 Ergonomics

10 Lyon (France) TC 22/SC 5 Road vehicles/Engine tests

10 Istanbul (Turkey) TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics


10 Oslo (Norway) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications

10 Oslo (Norway) TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications

10 Oslo (Norway) TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials

10 Boulder (USA) TC 202/SC 4 Microbeam analysis/Scanning electron microscopy (SEM)

11 Istanbul (Turkey) TC 38 Textiles

11 Berlin (Germany) TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works

11 Garching (Germany)

TC 60 Gears


TC 60/SC 1 Gears/Nomenclature and wormgearing


TC 60/SC 2 Gears/Gear capacity calculation

11 Venice (Italy) TC 146/SC 2 Air quality/Workplace atmospheres


TC 159/SC 5 Ergonomics/Ergo-nomics of the physi-cal environment


TC 59/SC 15 Buildings and civil engineering works/Performance descrip-tion of houses

14-15 Troy (USA) TC 22/SC 11 Road vehicles/Safety glazing materials

14-15 Frankfurt (Germany)

TC 39/SC 10 Machine tools/Safety

14-15 Paris (France) TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

14-15 Brussels (Belgium)

TC 122/SC 4 Packaging/Packaging and environment

14-17 Charlottenlund (Denmark)

TC 46/SC 8 Information and documentation/Quality - Statistics and performance evaluation

14-17 Stuttgart (Germany)

TC 165 Timber structures

14-18 Paris (France) PC 271 Compliance manage-ment systems

14-18 Seoul (Korea, Republic of)

TC 108 Mechanical vibration, shock and condition monitoring

14-18 Sydney (Australia)

TC 157 Non-systemic con-traceptives and STI barrier prophylactics

15 Halifax (Canada) TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

15 Paris (France) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds

15 Paris (France) TC 44/SC 7 Welding and allied processes/Represen-tation and terms

15-16 Paris (France) TC 2/SC 7 Fasteners/Reference standards

15-18 Berlin (Germany) TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

16 Paris (France) TC 2/SC 11 Fasteners/Fasteners with metric external thread

16 Halifax (Canada) TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

16 La Plaine St-Denis (France)

TC 44/SC 9 Welding and allied processes/Health and safety


TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions


TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details

16-18 Munich (Germany)

TC 58/SC 3 Gas cylinders/Cylin-der design

16-25 Beijing (China) TC 184/SC 2 Automation systems and integration/Robots and robotic devices

17 Paris (France) TC 2/SC 14 Fasteners/Surface coatings

17 Halifax (Canada) TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims


TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction


TC 123/SC 5 Plain bearings/Quality analysis and assurance


TC 123/SC 6 Plain bearings/Terms and common items

17 Milan (Italy) TC 216 Footwear

17-18 Paris (France) TC 44 Welding and allied processes

18 Paris (France) TC 2 Fasteners

18 Paris (France) TC 2/SC 12 Fasteners/Fasteners with metric internal thread

18 Berlin (Germany) TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles



TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages


TC 123 Plain bearings


TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings

19-20 Jacksonville (USA)

TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization


TC 8/SC 3 Ships and marine technology/Piping and machinery


TC 8/SC 6 Ships and ma-rine technology/Navigation and ship operations


TC 8/SC 7 Ships and marine technology/Inland navigation vessels


TC 8/SC 11 Ships and marine technology/Inter-modal and Short Sea Shipping

21 Berlin (Germany) TC 147/SC 1 Water quality/Terminology


PC 283 Occupational health and safety man-agement systems - Requirements

21-25 Singapore (Singapore)


21-25 Hudders-field (United Kingdom)

TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

21-25 Berlin (Germany) TC 154 Processes, data elements and documents in com-merce, industry and administration

21-25 Sao Paulo (Brazil)

TC 181 Safety of toys


TC 215 Health informatics


TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment

23 Paris (France) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

23 Berlin (Germany) TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability


TC 25 Cast irons and pig irons

23 Courbevoie, Paris (France)

TC 111 Round steel link chains, chain slings, components and accessories

23 Berlin (Germany) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology

23 Berlin (Germany) TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design

23 Tokyo (Japan) TC 206 Fine ceramics

24 Paris (France) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

24 Vienna (Austria) TC 83 Sports and other recreational facilities and equipment

24 Berlin (Germany) TC 147/SC 5 Water quality/Biologi-cal methods

24 Berlin (Germany) TC 147/SC 6 Water quality/Sampling (general methods)

24-25 Sarajevo (Bosnia and Herzegovina)

TC 34/SC 12 Food products/Sen-sory analysis

24-25 Berlin (Germany) TC 173 Assistive products for persons with disability

25 Vienna (Austria) TC 22/SC 22 Road vehicles/Motorcycles

25 Vienna (Austria) TC 22/SC 23 Road vehicles/Mopeds

25 Boston (USA) TC 92/SC 4 Fire safety/Fire safety engineering

25 Tokyo (Japan) TC 146/SC 1 Air quality/Stationary source emissions

25 Berlin (Germany) TC 147/SC 2 Water quality/Physi-cal, chemical and biochemical methods

25 Berlin (Germany) TC 147/SC 4 Water quality/Micro-biological methods

26 Berlin (Germany) TC 147 Water quality

28 Karlsruhe (Germany)

TC 117 Fans

28-29 Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

28-31 Bali (Indonesia) TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)

29 Kochi (India) TC 234 Fisheries and aquaculture

30 Prague (Czech Republic)

TC 266 Biomimetics

31 Bali (Indonesia) TC 45/SC 2 Rubber and rubber products/Testing and analysis

31 Bali (Indonesia) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

October-December 2013

7-11 Oslo (Norway) TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)

October-November 2013

28-1 Bali (Indonesia) TC 45 Rubber and rubber products

28-1 Cambridge, Massachusetts (USA)

TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment

28-2 Berlin (Germany) TC 130 Graphic technology


November 2013

1 Bali (Indonesia) TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry

2-9 Porto (Portugal) TC 176 Quality management and quality assurance

2-9 Porto (Portugal) TC 176/SC 1 Quality management and quality assur-ance/Concepts and terminology

2-9 Porto (Portugal) TC 176/SC 3 Quality management and quality assur-ance/Supporting technologies

3-8 Gyeongju (Ko-rea, Republic of)

TC 184/SC 4 Automation systems and integration/Indus-trial data


TC 34/SC 17 Food products/Man-agement systems for food safety

4-8 Porto (Portugal) TC 176/SC 2 Quality management and quality assur-ance/Quality systems

4-8 Bangkok (Thailand)

TC 217 Cosmetics

4-8 Nairobi (Kenya) TC 285 Clean cookstoves and clean cooking solutions

4-9 Perros-Guirec (France)


6-8 Paris (France) TC 275 Sludge recovery, recycling, treatment and disposal

7 Vienna (Austria) TC 83/SC 4 Sports and other rec-reational facilities and equipment/Snows-ports equipment

7 Okinawa (Japan) TC 201/SC 1 Surface chemical analysis/Terminology

7 Okinawa (Japan) TC 201/SC 2 Surface chemical analysis/General procedures

7 Okinawa (Japan) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy

7-9 Okinawa (Japan) TC 201 Surface chemical analysis

8 Delft (Netherlands)

TC 92/SC 1 Fire safety/Fire initia-tion and growth

8 Shenzen (China) TC 160 Glass in building

8 Shenzen (China) TC 160/SC 1 Glass in build-ing/Product considerations

8 Shenzen (China) TC 160/SC 2 Glass in building/Use considerations

8 Okinawa (Japan) TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment

8 Okinawa (Japan) * TC 201/SC 4 Surface chemi-cal analysis/Depth profiling

8 Okinawa (Japan) TC 201/SC 7 Surface chemical analysis/Electron spectroscopies

8 Washington, D.C (USA)

TC 227 Springs

9 Okinawa (Japan) TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy

11 Mexico City (Mexico)

TC 113/SC 1 Hydrometry/Velocity area methods

11-15 Mexico City (Mexico)

TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

11-15 Tokyo (Japan) TC 98 Bases for design of structures

11-15 Mexico City (Mexico)

TC 113 Hydrometry

12-13 Guangzhou (China)

TC 137 Footwear sizing des-ignations and marking systems

13 Tokyo (Japan) TC 110/SC 1 Industrial trucks/Gen-eral terminology


TC 113/SC 2 Hydrometry/Flow measurement structures

14 Tokyo (Japan) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks


TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management


TC 113/SC 6 Hydrometry/Sediment transport

14-15 Redlands (USA) TC 211 Geographic in-formation/Geomatics

15 Tokyo (Japan) TC 110 Industrial trucks


TC 113/SC 8 Hydrometry/Ground water

15 Belo Horizonte (Brazil)

TC 229 Nanotechnologies

18 Berlin (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems

18 Mumbay (India) TC 135/SC 8 Non-destructive test-ing/Infrared thermog-raphy for non-de-structive testing

18-20 Berlin (Germany) TC 20 Aircraft and space vehicles

18-21 Exton (USA) TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters

19-20 Tokyo (Japan) * TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

19-21 Singapore (Singapore)

TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

20-22 Tokyo (Japan) * TC 269 Railway applications

27 Milan (Italy) TC 221 Geosynthetics

30 Miami (USA) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

Berlin (Germany) ** TC 41 Pulleys and belts (including veebelts)

December 2013


1-5 Tel Aviv (Israel) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

4-5 La Plaine St-Denis (France)

* TC 279 Innovation process: interaction, tools and methods

5 Brussels (Belgium)

TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection

5-6 Paris (France) * TC 197 Hydrogen technologies

9-11 Geneva (Switzerland)

PC 284 Management System for Quality of Private Security Company (PSC) Operations - Requirements with Guidance

11 Frankfurt (Germany)

TC 270 Plastics and rubber machines

11-12 Kyoto (Japan) TC 281 Fine Bubble Technology

12-13 New York (USA) TC 171/SC 2 Document manage-ment applications/Application issues

12-13 Berlin (Germany) * TC 276 Biotechnology

16-20 Winterthur (Switzerland)

** TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment

Month unknown 2013

Bratislava (Slovakia)

** TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel

January 2014

13-16 New Delhi (India) * TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management

23 Paris (France) TC 17/SC 3 Steel/Steels for struc-tural purposes


* TC 71 Concrete, reinforced concrete and pre-stressed concrete

February 2014

10-11 Paris (France) * TC 44/SC 3 Welding and allied processes/Welding consumables

10-14 Paris (France) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

(South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces

(Sweden) ** TC 213 Dimensional and geometrical product specifications and verification

March 2014


TC 118 Compressors and pneumatic tools, ma-chines and equipment


* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines


* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems


* TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors


* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment

23-27 Warsaw (Poland) * TC 107 Metallic and other inorganic coatings

23-27 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

23-27 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests

23-27 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings


* COUNCIL Council

(Europe) ** TC 134 Fertilizers and soil conditioners

March-April 2014

31-4 Vienna (Austria) ** PC 271 Compliance manage-ment systems

1st Quarter 2014

(Netherlands) ** TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions

April 2014


* TC 6 Paper, board and pulps


* TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

7-11 Lund (Sweden) * TC 92 Fire safety

7-11 Vitoria (Brazil) * TC 102 Iron ore and direct reduced iron

7-11 Vitoria (Brazil) * TC 102/SC 1 Iron ore and direct re-duced iron/Sampling


7-11 Vitoria (Brazil) * TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis

7-11 Vitoria (Brazil) * TC 102/SC 3 Iron ore and direct reduced iron/Physical testing

7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks

7-11 Amsterdam (Netherlands)

* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

8-9 (Japan) ** TC 199 Safety of machinery

8-10 (Brazil) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

9-11 Jeju (Korea, Republic of)

* TC 112 Vacuum technology

14-15 Hong Kong (Hong Kong, China)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

23-24 (Europe) ** TC 167 Steel and aluminium structures

24-25 Bangkok (Thailand)

** TC 34 Food products

Berlin (Germany) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

May 2014

5-9 Washington, D.C (USA)

* TC 46 Information and documentation


* TC 46/SC 9 Information and documentation/Identification and description


* TC 46/SC 11 Information and doc-umentation/Archives/records management

5-10 St. Petersburg, Florida (USA)

* TC 96 Cranes

8 Santa María de Lamas (Portugal)

** TC 87 Cork

8 Wiesbaden (Germany)

* TC 226 Materials for the production of primary aluminium


* TC 10 Technical product documentation


* TC 10/SC 1 Technical product documentation/Basic conventions


* TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

12-16 Milan (Italy) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools


** TC 68/SC 4 Financial services/Securities and related financial instruments

12-16 Zhangjiajie (China)

** TC 195 Building construc-tion machinery and equipment

12-16 Zhangjiajie (China)

** TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work

14-16 Rosslyn (USA) ** TC 145 Graphical symbols

14-16 Rosslyn (USA) ** TC 145/SC 1 Graphical symbols/Public information symbols

14-16 Rosslyn (USA) ** TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours

14-16 Rosslyn (USA) ** TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment


TC 68 Financial services

15-20 Berlin (Germany) * TC 34/SC 5 Food products/Milk and milk products

19-23 Berlin (Germany) ** TC 43 Acoustics

19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise

19-23 Berlin (Germany) ** TC 43/SC 2 Acoustics/Building acoustics

19-24 Karuizawa (Japan)

** TC 215 Health informatics

20-21 Prague (Czech Republic)

* TC 122 Packaging

21-22 (USA) ** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment

23 Toronto (Canada) * TC 268 Sustainable develop-ment in communities

23-24 Beijing (China) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

26-29 Kyoto (Japan) * TC 249 Traditional chinese medicine

27-30 (USA) ** TC 156 Corrosion of metals and alloys

June 2014

1-6 (Sweden) ** TC 127 Earth-moving machinery

5-6 Berlin (Germany) * TC 211 Geographic in-formation/Geomatics


* TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection

16-20 Incheon (Korea, Republic of)

* TC 121 Anaesthetic and res-piratory equipment


* TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

17-18 Berlin (Germany) * TC 220 Cryogenic vessels


* TC 193 Natural gas

Düsseldorf (Germany)

** TC 17/SC 17 Steel/Steel wire rod and wire products

London (United Kingdom)

** TC 193/SC 1 Natural gas/Analysis of natural gas


July 2014

8-11 Boulder (USA) * REMCO Committee on refer-ence materials

September 2014

8-9 Madrid (Spain) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

8-12 Paris (France) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

10-12 Rio de Janeiro (Brazil)

* GA General Assembly

13 Rio de Janeiro (Brazil)

* COUNCIL Council

18-19 Manches-ter (United Kingdom)

** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

20 Manches-ter (United Kingdom)

** TC 281 Fine Bubble Technology

22-26 Durban (South Africa)

** TC 146 Air quality

22-26 Durban (South Africa)

** TC 146/SC 1 Air quality/Stationary source emissions


* CASCO Committee on con-formity assessment

Stockholm (Sweden)

** TC 17/SC 11 Steel/Steel castings

(USA) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines

Seattle (USA) ** TC 89 Wood-based panels

Montreal (Canada)

** TC 213 Dimensional and geometrical product specifications and verification

3rd Quarter 2014

London (United Kingdom)

** TC 48 Laboratory equipment

2nd-3rd Quarter 2014

Ljimuden (Netherlands)

** TC 17/SC 9 Steel/Tinplate and blackplate

October 2014

5-10 Berlin (Germany) ** TC 215 Health informatics

20-24 Nunspeet (Netherlands)

TC 149/SC 1 Cycles/Cycles and major sub-assemblies

20-24 Berlin (Germany) * TC 190 Soil quality

20-24 Berlin (Germany) * TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

20-24 Berlin (Germany) * TC 190/SC 2 Soil quality/Sampling

20-24 Berlin (Germany) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

20-24 Berlin (Germany) * TC 190/SC 4 Soil quality/Biological methods

20-24 Berlin (Germany) * TC 190/SC 5 Soil quality/Physical methods

20-24 Berlin (Germany) * TC 190/SC 7 Soil quality/Soil and site assessment

23-24 (South Africa) ** TC 178 Lifts, escalators and moving walks

Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables

Toronto (Canada) ** TC 59 Buildings and civil engineering works

Prague (Czech Republic)

** TC 135 Non-destructive testing

November 2014

3-7 Cape Town (South Africa)

** TC 45 Rubber and rubber products

4th Quarter 2014

(Portugal) ** TC 34/SC 4 Food products/Cere-als and pulses

2nd Semester 2014

Madrid (Spain) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

Month unknown 2014

(Australia) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

(Brazil) ** TC 28 Petroleum products and lubricants

Beijing (China) ** TC 36 Cinematography

(Germany) ** TC 37 Terminology and other language and content resources

(Japan) ** TC 44 Welding and allied processes

Nairobi (Kenya) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(United Kingdom)

** TC 142 Cleaning equipment for air and other gases

Suzhou (China) ** TC 164 Mechanical testing of metals

February 2015


* TC 213 Dimensional and geometrical product specifications and verification

St. Petersburg, Florida (USA)

** TC 115 Pumps

1st Quarter 2015

Foshan (China) ** TC 107 Metallic and other inorganic coatings

Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes

Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)

Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests


Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

April 2015

(France) ** TC 29 Small tools

(France) ** TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials

Tienjin (China) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

(Europe) ** TC 215 Health informatics

May 2015


** TC 4 Rolling bearings

June 2015

Beijing (China) ** TC 46 Information and documentation

2nd Quarter 2015

(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

September 2015

14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification

3rd Quarter 2015

Sao Paulo (Brazil)

** TC 215 Health informatics

November 2015

(China) ** JTC 1 Information technology

Month unknown 2015

(South Africa) ** REMCO Committee on refer-ence materials

(Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products

(Finland) ** TC 44 Welding and allied processes

(France) ** TC 45 Rubber and rubber products

(Russian Federation)

** TC 96 Cranes

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

(China) ** TC 155 Nickel and nickel alloys

(United Kingdom)

** TC 164 Mechanical testing of metals

(Austria) ** TC 190 Soil quality

February 2016

(USA) ** TC 213 Dimensional and geometrical product specifications and verification

April 2016

Seoul (Korea, Republic of)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

(Australia) ** TC 178 Lifts, escalators and moving walks

November 2016

(Norway) ** JTC 1 Information technology

Month unknown 2016

(Russian Federation)

** REMCO Committee on refer-ence materials

(Australia) ** TC 44 Welding and allied processes

Documents

ISO Update · ISO Update, Supplement to ISO Focus -- September 2013 1 International Standards in process ... ISO/CD 8502-3 Preparation of steel substrates before applica-