ISO Update · PDF fileISO Update, Supplement to ISO Focus -- March 2016 1. International Standards in process. ... ISO/CD 17123-9 Optics and optical instruments — Field proce

ISO Update Supplement to ISOfocus

March 2016

ISO Update, Supplement to ISO Focus -- March 2016 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 February to 29 February 2016

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

PC 245 Cross-border trade of second-hand goods

ISO/CD 20245 Cross-border trade of second-hand goods

TC 4 Rolling bearings

ISO/CD 19843 Rolling bearings - Ceramic bearings balls - De-termination of the strength - Notched ball test

TC 29 Small tools

ISO/CD 20928 Tools for pressing — Spring plungers with heli-cal compression steel spring or nitrogen gas spring

ISO/CD 20929 Tools for pressing — Heel guidings in large stamping and forming dies

TC 34 Food products

ISO/CD 16140-4

Microbiology of the food chain — Method vali-dation — Part 4: Protocol for single-laboratory (in-house) method validation

ISO/CD 16140-6

Microbiology of the food chain — Method vali-dation — Part 6: Protocol for the validation of alternative (proprietary) methods for microbio-logical confirmation and typing

TC 35 Paints and varnishes

ISO/CD 16053 Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test

ISO/DTR 19402

Paints and varnishes — Adhesion of coatings

TC 42 Photography

ISO/DTS 19567-2

Photography — Digital cameras — Part 2: Texture analysis on non cyclic pattern

TC 43 Acoustics

ISO/CD 11819-3

Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Refer-ence tyres

TC 61 Plastics

ISO/CD 18485 Peel test for the determination of interlami-nar fracture toughness of flexible packaging laminates

ISO/CD 2555 Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method

ISO/CD 20819 Product specification for wood plastic recycled composites

ISO/CD 20368 Plastics — Epoxy resins — Determination of degree of crosslinking for crosslinking epoxy resins by Fourier transform infrared spectroscopy

TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO 13680:2010/CD Amd 1

Petroleum and natural gas industries — Corro-sion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions — Amendment 1

ISO/CD 35102 Petroleum and natural gas industries — Arctic Operations — Escape, evacuation and rescue from offshore installations

TC 69 Applications of statistical methods

ISO/DTR 11462-3

Guidelines for implementation of statistical process control (SPC) — Part 3: SPC on test examples for software validation

TC 84 Devices for administration of medicinal products and catheters

ISO/CD 7886-3 Sterile hypodermic syringes for single use — Part 3: Auto-disable syringes for fixed-dose immunization

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/DTS 11665-12

Measurement of radioactivity in the environ-ment — Air : radon 222 — Part 12: Determina-tion of the diffusion coefficient in waterproof materials: membrane one-side activity concen-tration measurement method

ISO/DTS 11665-13

Measurement of radioactivity in the environ-ment — Air: radon 222 — Part 13: Determina-tion of the diffusion coefficient in waterproof materials: membrane two-side activity con-centration measurement method

TC 96 Cranes

ISO/CD 9927-5 Cranes — Inspections — Part 5: Bridge and gantry cranes

TC 106 Dentistry

ISO/DTR 28642

Dentistry — Guidance on colour measurement

ISO/CD 20570 Dentistry — Oral surgical scalpel handle

TC 121 Anaesthetic and respiratory equipment

ISO/CD 80601-2-79

Medical electrical equipment — Part 2-79: Particular requirements for basic safety and essential performance of home healthcare environment ventilatory support equipment for respiratory impairment

ISO/CD 80601-2-80

Medical electrical equipment — Part 2-80: Particular requirements for basic safety and essential performance of home healthcare environment ventilatory support equipment for respiratory insufficiency

TC 122 Packaging

2 ISO Update, Supplement to ISO Focus -- March 2016

ISO/CD 19809 Packaging-Accessible design-Information and marking

TC 126 Tobacco and tobacco products

ISO/CD 22634-2

Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke — Method using gas chromatography/mass spectrom-etry — Part 2: Method using cyclohexane as extraction solvent

TC 130 Graphic technology

ISO/CD 2846-1 Graphic technology — Colour and transpar-ency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 21138-2

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fit-tings with smooth external surface, Type A

ISO/CD 21138-3

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fit-tings with non-smooth external surface, Type B

ISO/CD 7510 Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents using the gravi-metric method

TC 146 Air quality

ISO/DTS 20593

Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) — Pyrolysis-GC/MS method

TC 154 Processes, data elements and docu-ments in commerce, industry and administration

ISO/CD 8601-1 Data elements and interchange formats — Information interchange — Representation of dates and times — Part 1: Basic rules

ISO/CD 8601-2 Data elements and interchange formats — Information interchange — Representation of dates and times — Part 2: Extensions

TC 165 Timber structures

ISO/CD 12122-5

Timber structures — Determination of charac-teristic values — Part 5: Connections

TC 171 Document management applications

ISO/CD 11506 Document management applications — Ar-chiving of electronic data — Computer output microform (COM) / Computer output laser disc (COLD)

TC 172 Optics and photonics

ISO/CD 17123-9

Optics and optical instruments — Field proce-dures for testing geodetic and surveying instru-ments — Part 9: Terrestrial laser scanners

ISO/DTR 18476

Ophthalmic optics and instruments — Free form technology — Spectacle lenses and measurement

TC 188 Small craft

ISO/CD 16147 Small craft — Inboard diesel engines — En-gine-mounted fuel and electrical components

TC 190 Soil quality

ISO/CD 15175 Soil quality — Characterization of soil related to groundwater protection

TC 198 Sterilization of health care products

ISO/CD TS 11139

Sterilization of health care products — Vocabulary

TC 215 Health informatics

ISO/CD 13606-1

Health informatics — Electronic health record communication — Part 1: Reference model

ISO/CD 13606-2

Health informatics — Electronic health record communication — Part 2: Archetype inter-change specification

TC 217 Cosmetics

ISO/DTR 18811

Cosmetics — Guidelines on the stability testing of cosmetics products

TC 220 Cryogenic vessels

ISO/CD 21010 Cryogenic vessels — Gas/materials compatibility

TC 238 Solid biofuels

ISO/CD 20023 Solid biofuels — Safety of solid biofuel pellets — Safe handling and storage of wood pellets in residential and other small-scale applications

TC 249 Traditional chinese medicine

ISO/CD 20498-2

Traditional Chinese medicine — Computerised tongue image analysis system — Part 2: Light environment

TC 268 Sustainable development in communities

ISO/CD 37154 Smart community infrastructures — Best prac-tice guidelines for transportation

TC 299 Robots and robotic devices

ISO/CD TR 21382

Robots and robotic devices — Safety-related test methods for ISO 13482

JTC 1 Information technology

ISO/IEC CD 27050-2

Information technology — Security techniques — Electronic discovery — Part 2: Guidance for governance and management of electronic discovery

ISO/IEC 23000-13/PDAM 1

Information technology - Multimedia applica-tion format (MPEG-A) — Part 13: Augmented reality application format — Amendment 1

ISO/IEC CD 9075-15

Information technology — Database languages — SQL — Part 15: Multi dimensional arrays

ISO/IEC PDTR 19075-5

Information technology — Database languages — SQL Technical Reports — Part 5: Row Pat-tern Recognition in SQL


Information technology — Database languages — SQL Technical Reports — Part 6: SQL sup-port for JSON

ISO/IEC CD 20382

Information technology — User interfaces — Face-to-Face Speech Translation

ISO/IEC CD 30113-5

Information technology — User interface — Gesture-based interfaces across devices and methods — Part 5: Gesture Interface Markup Language(GIML)

ISO/IEC CD 19784-1

Information technology — Biometric applica-tion programming interface — Part 1: BioAPI specification

ISO/IEC CD 24779-5

Information technology — Cross-jurisdictional and societal aspects of implementation of bio-metric technologies — Pictograms, icons and symbols for use with biometric systems — Part 5: Face applications


Information Technology — Governance of IT — Part 2: Implications of 38505-1 for data management


DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

PC 283 Occupational health and safety management systems

ISO/DIS 45001 * Occupational health and safety management systems — Re-quirements with guidance for use

2016-05-13

TC 8 Ships and marine technology

ISO/DIS 20519 * Ships and marine technology — Specification for bunkering of gas fuelled ships

2016-05-05

ISO/DIS 18139 * Ships and marine technology — Globe valves for use in low tem-perature applications — Design and testing requirements

2016-05-11

ISO/DIS 18154 * Ships and marine technology — Pilot operated safety valves for low temperature applications — Design requirements

2016-05-19

TC 20 Aircraft and space vehicles

ISO/DIS 21323 * Space data and information transfer systems — CCSDS Bundle protocol specification

2016-05-19

ISO/DIS 21324 * Space data and information transfer systems — Space data link security protocol

2016-05-19

ISO/DIS 19826 * Space systems — Programme management --Management of product characteristics

2016-05-12

TC 22 Road vehicles

ISO/DIS 13400-3

* Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3

2016-05-18

(Revision of ISO 13400-3:2011)

TC 23 Tractors and machinery for agriculture and forestry

ISO 5395-2:2013/DAmd 2

* Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers — Amendment 2: Cutting means enclosure guards

2016-05-12

ISO/DIS 6531 * Machinery for forestry — Port-able chainsaws — Vocabulary

2016-05-04

(Revision of ISO 6531:2008)

ISO/DIS 7112 * Machinery for forestry — Port-able brushcutters and grass-trimmers — Vocabulary


TC 24 Particle characterization including sieving

ISO/DIS 19430.2

* Particle size analysis — Particle tracking analysis (PTA) method

2016-04-11

TC 25 Cast irons and pig irons

ISO/DIS 16112 * Compacted (vermicular) graphite cast irons — Classification

2016-05-09


TC 28 Petroleum products and re-lated products of synthetic or biological origin

ISO/DIS 2592 * Petroleum and related products — Determination of flash and fire points — Cleveland open cup method

2016-05-19


TC 29 Small tools

ISO/DIS 1711-1

* Assembly tools for screws and nuts — Technical specifica-tions — Part 1: Hand-operated wrenches and sockets

2016-05-23


ISO/DIS 1711-2

* Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact)

2016-05-23


TC 34 Food products

ISO 2256:1984/DAmd 1

* Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) — Specification — Amendment 1

2016-05-10

ISO 6571:2008/DAmd 1

* Spices, condiments and herbs — Determination of volatile oil content (hydrodistillation method) — Amendment 1

2016-05-12

ISO/DIS 19563 * Determination of theanine in tea and instant tea in solid form using high-performance liquid chromatography

2016-05-09

TC 39 Machine tools

ISO/DIS 14955-1

* Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools

2016-05-26


ISO/DIS 19085-4.2

* Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines

2016-05-12

ISO/DIS 19085-7

* Woodworking machines — Safety — Part 7: Surface plan-ing, thickness planing, combined surface/thickness planing machines

2016-05-12


ISO/DIS 19085-9

* Woodworking machines — Safety — Part 9: Circular saw benches (with and without slid-ing table)

2016-05-26

TC 41 Pulleys and belts (including veebelts)

ISO/DIS 15236-2

* Steel cord conveyor belts — Part 2: Preferred belt types

2016-05-19


TC 43 Acoustics

ISO/DIS 18405.2

Underwater acoustics — Terminology

2016-04-16

TC 44 Welding and allied processes

ISO/DIS 20378 * Welding consumables — Rods for gas welding of non al-loy and creep-resisting steels — Classification

2016-05-24

ISO/DIS 23279 * Non-destructive testing of welds — Ultrasonic testing — Charac-terization of indications in welds

2016-05-12


TC 45 Rubber and rubber products

ISO/DIS 1431-3

* Rubber, vulcanized or thermo-plastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for de-termining the ozone concentra-tion in laboratory test chambers

2016-05-18


ISO/DIS 1827 * Rubber, vulcanized or ther-moplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods

2016-05-18


ISO/DIS 4662 * Rubber, vulcanized or ther-moplastic — Determination of rebound resilience

2016-05-06

(Revision of ISO 4662:2009, ISO 4662:2009/Cor 1:2010)

ISO/DIS 4666-3

* Rubber, vulcanized — Determi-nation of temperature rise and resistance to fatigue in flexom-eter testing — Part 3: Compres-sion flexometer (constant-strain type)

2016-05-10


ISO/DIS 23529 * Rubber — General procedures for preparing and condition-ing test pieces for physical test methods

2016-05-11


TC 46 Information and documentation

ISO/DIS 2108 * Information and documentation — International Standard Book Number (ISBN)

2016-05-12


TC 58 Gas cylinders

ISO/DIS 17879 * Gas cylinders — Self-closing cyl-inder valves — Specification and type testing

2016-05-19

TC 59 Buildings and civil engi-neering works

ISO/DIS 21930 * Sustainability in buildings and civil engineering works — Core rules for environmental declara-tion of construction products and services used in any type of construction works

2016-05-11


TC 61 Plastics

ISO/DIS 4589-1

* Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance

2016-05-19


ISO/DIS 4589-2

* Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-tem-perature test

2016-05-19

(Revision of ISO 4589-2:1996, ISO 4589-2:1996/Amd 1:2005)

ISO/DIS 4589-3

* Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-tem-perature test

2016-05-19


ISO/DIS 294-1 * Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General prin-ciples, and moulding of multipur-pose and bar test specimens

2016-05-05

(Revision of ISO 294-1:1996, ISO 294-1:1996/Amd 1:2001, ISO 294-1:1996/Amd 2:2005)

ISO/DIS 15023-1

* Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Des-ignation system and basis for specifications

2016-05-12



ISO/DIS 16355-2

* Application of statistical and related methods to new technol-ogy and product development process — Part 2: Acquistion of Voice of Customer and Voice of Stakeholder — Non-quantitative approaches

2016-05-22

ISO/DIS 16355-4

* Application of statistical and related methods to new technol-ogy and product development process — Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder

2016-05-22

ISO/DIS 16355-5

* Application of statistical and related methods to new technol-ogy and product development process — Part 5: Solution strategy

2016-05-22

TC 83 Sports and other rec-reational facilities and equipment

ISO/DIS 10256-5

* Protective equipment for use in ice hockey — Part 5: Neck lac-eration protectors for ice hockey players


TC 84 Devices for administration of medicinal products and catheters

ISO 10555-1:2013/DAmd 1

* Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1

2016-05-19

ISO/DIS 11608-4

* Needle-based injection systems for medical use - Requirements and test methods — Part 4: Needle-based injection systems containing electronics

2016-05-12


TC 92 Fire safety

ISO/DIS 19021 * Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy

2016-05-06

ISO/DIS 26367-2

* Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Meth-odology for compiling data on environmentally significant emis-sions from fires

2016-05-18

TC 96 Cranes

ISO/DIS 4309 * Cranes — Wire ropes — Care and maintenance, inspection and discard

2016-05-26


TC 102 Iron ore and direct reduced iron

ISO/DIS 3082 * Iron ores — Sampling and sam-ple preparation procedures

2016-05-04


TC 106 Dentistry

ISO/DIS 9873 * Dentistry — Intra-oral mirrors

2016-05-05


ISO/DIS 19715 * Dentistry — Filling instruments with contra set

2016-05-11

TC 110 Industrial trucks

ISO/DIS 22879 * Castors and wheels — Require-ments for castors for furniture

2016-05-13

ISO/DIS 22880 * Castors and wheels — Castors for furniture — Requirements for castors for swivel chairs

2016-05-19

ISO/DIS 22882 * Castors and wheels — Require-ments for castors for hospital beds

2016-05-13


ISO 19054:2005/DAmd 1

* Rail systems for supporting medical equipment — Amend-ment 1

2016-05-12

TC 123 Plain bearings

ISO/DIS 6280 * Plain bearings — Requirements on backings for thick-walled multilayer bearings

2016-05-09


ISO/DIS 6282 * Plain bearings — Metallic thin-walled half bearings — Determi-nation of the sigma 0,01*-limit

2016-05-16


ISO/DIS 6525 * Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances

2016-05-16


ISO/DIS 6526 * Plain bearings — Pressed bimetallic half thrust washers — Features and tolerances

2016-05-16


ISO/DIS 3548-2

* Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness

2016-05-18


ISO/DIS 12132 * Plain bearings — Quality assur-ance of thin- walled half bearings — Design FMEA

2016-05-18


ISO/DIS 12302 * Plain bearings — Quality char-acteristics — Statistical process control (SPC)

2016-05-18


ISO/DIS 12308 * Plain bearings — Quality assur-ance — Sample types — Defini-tions, applications and testing

2016-05-18


ISO/DIS 13778 * Plain bearings — Quality as-surance of thin-walled half bearings — Selective assembly of bearings to achieve a narrow clearance range

2016-05-18


ISO/DIS 20054 * Plain bearings — Bearings con-taining dispersed solid lubricants

2016-05-11

TC 126 Tobacco and tobacco products

ISO 15152:2003/DAmd 2

* Tobacco — Determination of the content of total alkaloids as nico-tine — Continuous-flow analysis method — Amendment 2

2016-05-09

TC 127 Earth-moving machinery

ISO/DIS 13766-1

* Earth-moving- and Build-ing construction machinery — Electromagneticcompatibility of machines with internal electrical power sup-ply — Part 1: General EMC requirements under typical EMC environmental conditions

2016-05-05


ISO/DIS 13766-2

* Earth-moving machinery — Elec-tromagnetic compatibility — Part 2: EMC requirements under the aspect of functional safety

2016-05-05




ISO/DIS 16762 * Graphic technology — Post press --General Requirements for transfer, handling and storage

2016-05-18

ISO/DIS 19594 * Graphic technology — Test methods for the determination of the binding strength for perfect bound products — Page pull test working upwards

2016-05-24

TC 131 Fluid power systems

ISO/DIS 6605 * Hydraulic fluid power — Test methods for hoses and hose assemblies

2016-05-04


TC 134 Fertilizers and soil conditioners

ISO/DIS 19670 * Fertilizers and soil condition-ers — Solid urea aldehyde slow release fertilizer — General requirements

2016-05-05

TC 150 Implants for surgery

ISO/DIS 19227 * Cleaning of orthopedic implants - General Requirements

2016-05-19

ISO 7206-2:2011/DAmd 1

* Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials — Amend-ment 1

2016-05-04

ISO 7207-2:2011/DAmd 1

* Implants for surgery — Com-ponents for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 1

2016-05-04

ISO/DIS 11491.2

Implants for surgery — Test method for impact resistance of ceramic femoral heads for hip joint prostheses

2016-04-15

TC 153 Valves

ISO/DIS 19240 * Industrial valves - Lined metal quarter turn and check valves for chemical process and related industries

2016-05-10

TC 155 Nickel and nickel alloys

ISO/DIS 6372 * Nickel and nickel alloys — Terms and definitions

2016-05-09

(Revision of ISO 6372-1:1989, ISO 6372-2:1989, ISO 6372-3:1989)

TC 159 Ergonomics

ISO/DIS 9241-220

* Ergonomics of human-computer interaction — Part 220: Process-es for enabling, executing and assessing human-centred design within organizations

2016-05-19

TC 171 Document management applications

ISO/DIS 32000-2.3

Document management — Port-able document format — Part 2: PDF 2.0

2016-04-12

TC 184 Automation systems and integration

ISO/DIS 20140-5

Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 5: Environmental influence evaluation data

2016-05-04

TC 194 Biological and clinical eval-uation of medical devices

ISO/DIS 10993-16

* Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables

2016-05-19


TC 201 Surface chemical analysis

ISO/DIS 16962 * Surface chemical analysis — Analysis of zinc- and/or alumin-ium-based metallic coatings by glow-discharge optical-emission spectrometry

2016-05-17


TC 204 Intelligent transport systems

ISO/DIS 13111-1

* Intelligent transport systems (ITS) — The use of personal ITS station to support ITS service provision for travelers — Part 1: General information and use cases definitions

2016-05-04

ISO/DIS 13140-2

* Electronic fee collection — Eval-uation of on-board and roadside equipment for conformity to EN ISO 13141 — Part 2: Abstract test suite

2016-05-12

(Revision of ISO/TS 13140-2:2012)

ISO/DIS 13143-2

* Electronic fee collection — Eval-uation of on-board and roadside equipment for conformity to EN ISO/TS 12813 — Part 2: Abstract test suite

2016-05-12


TC 206 Fine ceramics

ISO/DIS 19603 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for determin-ing elastic modulus and strength of thick ceramic coating

2016-05-12

ISO/DIS 20343 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus of thick ceramic coating at elevated temperature

2016-05-12

TC 207 Environmental management

ISO/DIS 14055-1

Environmental management — Guidelines for establishing good practices for combatting land degradation and desertifica-tion — Part 1: Good practices framework

2016-05-18

TC 209 Cleanrooms and associat-ed controlled environments

ISO/DIS 14644-13

* Cleanrooms and associated con-trolled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications

2016-05-12


TC 215 Health informatics

ISO/DIS 21298.2

* Health informatics — Functional and structural roles

2016-04-05

(Revision of ISO/TS 21298:2008)

ISO/DIS 21549-7.2

* Health informatics — Patient healthcard data — Part 7: Medi-cation data

2016-04-19


TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and perfor-mance indicators

ISO/DIS 24516-3

* Guidelines for management of assets of water supply and wastewater systems — Part 3: Wastewater collection networks

2016-05-25

TC 228 Tourism and related services

ISO/DIS 11121 * Recreational diving services — Requirements for introductory programmes to scuba diving

2016-05-19


ISO/DIS 13687-2

* Tourism and related services — Yacht harbours — Part 2: Mini-mum requirements for intermedi-ate service level harbours

2016-05-18

ISO/DIS 13687-3

* Tourism and related services — Yacht harbours — Part 3: Minimum requirements for high service level harbours

2016-05-18

ISO/DIS 24803 * Recreational diving services — Requirements for recreational diving providers

2016-05-19


TC 249 Traditional chinese medicine

ISO/DIS 18668-2

* Traditional Chinese medicine — Coding System of Chinese Medicines — Part 2: Codes of Decoction Pieces

2016-05-18

ISO/DIS 18668-3

* Traditional Chinese medicine — Coding System of Chinese Medicines — Part 3: Codes of Chinese Materia Medica

2016-05-19

ISO/DIS 18668-4

* Traditional Chinese medicine — Coding System of Chinese Medi-cines — Part 4: Codes of granule forms of individual medicinals for prescriptions

2016-05-19


ISO/IEC/IEEE DIS 24748-5

* Systems and software engineer-ing — Life cycle management — Part 5: Software development planning

2016-05-19

ISO/IEC 14443-4:2008/DAmd 6

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 4: Trans-mission protocol — Amendment 6: S(PARAMETERS) clarification

2016-05-10

ISO/IEC DIS 20009-4

* Information technology — Secu-rity techniques — Anonymous entity authentication — Part 4: Mechanisms based on weak secrets

2016-05-26

ISO/IEC DIS 27003

* Information technology — Se-curity techniques — Information security management system — Guidance

2016-05-12

(Revision of ISO/IEC 27003:2010)

ISO/IEC DIS 27004

* Information technology — Se-curity techniques — Information security management — Moni-toring, measurement, analysis and evaluation

2016-05-06


ISO/IEC 14496-10:2014/DAmd 3

* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 3: Additional Supplemental Enhancement Information

2016-05-09

ISO/IEC DIS 14496-33

* Information technology — Cod-ing of audio-visual objects — Part 33: Internet Video Coding

2016-05-18

ISO/IEC DIS 23000-18

* Information Technologies — Multimedia Application Formats (MPEG-A) — Part 18: Media Linking Application Format

2016-05-13

ISO/IEC 23001-10:2015/DAmd 1

* Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format — Amendment 1: Carriage of ROI coordinates

2016-05-18

ISO/IEC 23003-2:2010/DAmd 4

* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 4: SAOC Conformance

ISO/IEC DIS 24779-4

* Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pic-tograms, Icons and Symbols for use with Biometric Systems — Part 4: Fingerprint Applications

ISO/IEC DIS 20000-6

* Information Technology — Ser-vice Management — Part 6: Re-quirements for bodies providing audit and certification of service management systems

2016-05-18

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 2 Fasteners


ISO/FDIS 4759-3

* Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F

2016-04-19


TC 6 Paper, board and pulps

ISO/FDIS 8254-2

* Paper and board — Measure-ment of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method

2016-04-19


TC 21 Equipment for fire protec-tion and fire fighting

ISO/FDIS 7076-6

* Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems

2016-04-20

TC 22 Road vehicles

ISO 2575:2010/FDAmd 5

* Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 5

2016-04-09

TC 29 Small tools

ISO/FDIS 1641-1

* End mills and slot drills — Part 1: Milling cutters with cylindrical shanks

2016-04-21


ISO/FDIS 3293 * Morse taper shank countersinks for angles 60 degrees, 90 de-grees and 120 degrees inclusive

2016-04-22


ISO/FDIS 3294 * Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive

2016-04-20


TC 34 Food products

ISO/FDIS 16634-2

* Food products — Determination of the total nitrogen content by combustion according to the Du-mas principle and calculation of the crude protein content — Part 2: Cereals, pulses and milled cereal products

2016-04-12


ISO/FDIS 16140-1.2

* Microbiology of the food chain — Method validation — Part 1: Vocabulary

2016-04-12

(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)

ISO/FDIS 16140-2.2

* Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method

2016-04-12

(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)

ISO/FDIS 11702

* Animal and vegetable fats and oils — Enzymatic determination of total sterols content

2016-05-26


ISO/FDIS 12966-3

* Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 3: Preparation of methyl esters using trimethylsulfonium hydrox-ide (TMSH)

2016-04-12


ISO/FDIS 21033

* Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spec-troscopy (ICP-OES)

2016-04-09

(Revision of ISO/TS 21033:2011, ISO/TS 21033:2011/Amd 1:2012)


ISO/FDIS 4629-1

* Binders for paints and varnishes — Determination of hydroxyl value — Part 1: Titrimetric method without using a catalyst

2016-04-19


ISO/FDIS 4629-2

* Binders for paints and varnishes — Determination of hydroxyl value — Part 2: Method using a catalyst

2016-04-19

TC 38 Textiles

ISO/FDIS 105-G01

* Textiles — Tests for colour fast-ness — Part G01: Colour fast-ness to nitrogen oxides

2016-04-12

(Revision of ISO 105-G01:1993, ISO 105-G01:1993/Cor 1:1995)

ISO/FDIS 105-G04

* Textiles — Tests for colour fastness — Part G04: Colour fastness to nitric oxide in the atmosphere at high humidities

2016-04-11

(Revision of ISO 105-G04:1989)


ISO/FDIS 14171

* Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification

2016-04-05



ISO/FDIS 813 * Rubber, vulcanized or thermo-plastic — Determination of adhe-sion to a rigid substrate — 90 degree peel method

2016-04-09


ISO/FDIS 14558

* Rubber — Determination of residual unsaturation of hydro-genated nitrile rubber (HNBR) by infrared spectroscopy

2016-04-11


TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/FDIS 17785-1.2

* Testing methods for pervious concrete — Part 1: Infiltration rate

2016-04-23

TC 72 Textile machinery and accessories

ISO/FDIS 11111-1

* Textile machinery — Safety requirements — Part 1: Common requirements

2016-04-05


ISO 11111-2:2005/FDAmd 2

* Textile machinery — Safety requirements — Part 2: Spin-ning preparatory and spinning machines — Amendment 2

2016-04-05


ISO 11111-3:2005/FDAmd 2

* Textile machinery — Safety re-quirements — Part 3: Nonwoven machinery — Amendment 2

2016-04-05

ISO 11111-4:2005/FDAmd 2

* Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2

2016-04-05

ISO 11111-5:2005/FDAmd 2

* Textile machinery — Safety requirements — Part 5: Prepara-tory machinery to weaving and knitting — Amendment 2

2016-04-05

ISO 11111-6:2005/FDAmd 2

* Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery — Amendment 2

2016-04-05

ISO 11111-7:2005/FDAmd 2

* Textile machinery — Safety re-quirements — Part 7: Dyeing and finishing machinery — Amend-ment 2

2016-04-05

TC 92 Fire safety

ISO 12863:2010/FDAmd 1

* Standard test method for as-sessing the ignition propensity of cigarettes — Amendment 1

2016-04-12

TC 96 Cranes

ISO/FDIS 4306-3

* Cranes — Vocabulary — Part 3: Tower cranes

2016-04-18

(Revision of ISO 4306-3:2003, ISO 4306-3:2003/Amd 1:2011)

ISO/FDIS 4301-1

* Cranes — Classification — Part 1: General

2016-04-17

TC 106 Dentistry

ISO/FDIS 10139-2

* Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use

2016-04-12



IEC 80601-2-35:2009/FDAmd 1

Medical electrical equipment — Part 2-35: Particular require-ments for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use — Amendment 1

2016-04-12

TC 127 Earth-moving machinery

ISO/FDIS 15818

* Earth-moving machinery — Lifting and tying-down attach-ment points — Performance requirements

2016-04-21


ISO/FDIS 19445

* Graphic technology — Metadata for graphic arts workflow — XMP metadata for image and docu-ment proofing

2016-04-11


ISO/FDIS 3601-2

* Fluid power systems — O-rings — Part 2: Housing dimensions for general applications

2016-04-03



ISO/FDIS 16486-4

* Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves

2016-04-18

TC 142 Cleaning equipment for air and other gases

ISO/FDIS 15858

* UV-C Devices — Safety infor-mation — Permissible human exposure

2016-04-05

ISO/FDIS 16170

* In situ test methods for very high efficiency filter systems in industrial facilities

2016-04-05

TC 150 Implants for surgery

ISO/FDIS 7206-13

* Implants for surgery — Partial and total hip joint prostheses — Part 13: Determination of resist-ance to torque of head fixation of stemmed femoral components

2016-04-11

TC 155 Nickel and nickel alloys

ISO/FDIS 8049 * Ferronickel shot — Sampling for analysis

2016-04-26


TC 168 Prosthetics and orthotics

ISO/FDIS 10328

* Prosthetics — Structural testing of lower-limb prostheses — Re-quirements and test methods

2016-04-12


ISO/FDIS 22675

* Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods

2016-04-12


TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO/FDIS 13543

* Copper, lead, zinc and nickel sulfide concentrates — Deter-mination of mass of contained metal in a lot

2016-04-23


TC 185 Safety devices for protec-tion against excessive pressure

ISO 4126-1:2013/FDAmd 1

* Safety devices for protection against excessive pressure — Part 1: Safety valves — Amend-ment 1

2016-04-19

ISO 4126-5:2013/FDAmd 1

* Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Amendment 1

2016-04-19

ISO 4126-7:2013/FDAmd 1

* Safety devices for protection against excessive pressure — Part 7: Common data — Amend-ment 1

2016-04-19

TC 188 Small craft


ISO/FDIS 8666 * Small craft — Principal data

2016-04-26


TC 210 Quality management and corresponding general as-pects for medical devices

ISO/FDIS 80369-3

* Small-bore connectors for liquids and gases in healthcare applica-tions — Part 3: Connectors for enteral applications

2016-04-05

TC 257 Evaluation of energy savings

ISO/FDIS 17743

* Energy savings — Definition of a methological framework applica-ble to calculation and reporting on energy savings

2016-04-19


ISO/IEC FDIS 25066

* Systems and software engineer-ing — Systems and software Quality Requirements and Evalu-ation (SQuaRE) — Common industry Format for Usability — Evaluation Report

2016-04-16

ISO/IEC FDIS 14443-2

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface

2016-04-26

(Revision of ISO/IEC 14443-2:2010, ISO/IEC 14443-2:2010/Amd 1:2011, ISO/IEC 14443-2:2010/Amd 2:2012, ISO/IEC 14443-2:2010/Amd 3:2012, ISO/IEC 14443-2:2010/FDAmd 5)


* Information technology — Se-curity techniques — Blind digital signatures — Part 2: Discrete logarithm based mechanisms

2016-04-16


* Information technology — Secu-rity techniques — A framework for identity management — Part 3: Practice

2016-04-19

ISO/IEC FDIS 27009

* Information technology — Secu-rity techniques — Sector-specific application of ISO/IEC 27001 — Requirements

2016-04-05


* Information technology — Secu-rity techniques — Network secu-rity — Part 6: Securing wireless IP network access

2016-04-19


* Information technology — Se-curity techniques — Information security incident management — Part 1: Principles of incident management

2016-04-16



* Information technology — Se-curity techniques — Information security incident management — Part 2: Guidelines to plan and prepare for incident response

2016-04-16



* Information technology — Se-curity techniques — Light-weight cryptography — Part 5: Hash-functions

2016-04-19


* Information technology — Mul-timedia application format (MPEG-A) — Part 15: Multimedia preservation application

2016-04-05

ISO/IEC 23008-5:2015/FDAmd 2

* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 5: Reference software for high efficiency video coding — Amendment 2: Refer-ence Software for the Multiview Main Profile of HEVC

2016-04-05

ISO/IEC FDIS 18384-1.2

* Information technology — Refer-ence Architecture for Service Oriented Architecture (SOA RA) — Part 1: Terminology and concepts for SOA

2016-04-19


* Information technology — Refer-ence Architecture for Service Oriented Architecture (SOA RA) — Part 2: Reference Architecture for SOA Solutions

2016-04-19


* Information Technology — Refer-ence Architecture for Service Oriented Architecture (SOA RA) — Part 3: Service Oriented Architecture Ontology

2016-04-19

Standards published

New International Standards published between 01 February and 29 February 2016


** French version of standard previously published in English only

Price

group

TC 10 Technical product documentation

ISO 18388:2016

* Technical product documentation (TPD) — Relief grooves — Types and dimensioning

B

TC 17 Steel

ISO 4829-2:2016

Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 % and 0,05 %

B

ISO 4938:2016 Steel and iron — Determination of nickel content — Gravimetric or titri-metric method

C

ISO 4946:2016 Steel and cast iron — Determination of copper — 2,2'-Biquinoline spectropho-tometric method

B


ISO 17577:2016

* Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm

C


ISO 3209:2016 * Aerospace — Nuts, anchor, self-lock-ing, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

A

ISO 9154:2016 * Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Pro-curement specification

D

ISO 9609:2016 * Aerospace — Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 900 MPa (at ambient temperature) /235 degrees C, 900 MPa (at ambient temperature) /315 degrees C, 900 MPa (at ambient temperature) /650 degrees C, 1 100 MPa (at ambient temperature) /235 degrees C, 1 100 MPa (at ambient temperature) /730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions

A

ISO 9618:2016 * Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifi-cations: 450 MPa (at ambient tem-perature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient tem-perature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient tem-perature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient tempera-ture)/600 degrees C — Dimensions

A

ISO 12260:2016

* Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

A

ISO 12261:2016

* Aerospace — Screws, pan head, inter-nal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

A

ISO 12289:2016

* Aerospace — Rivets, solid, in corro-sion-resisting steel — Procurement specification

B

TC 22 Road vehicles

ISO 6624-2:2016

* Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron

C

ISO 6624-4:2016

* Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel

D

ISO 12156-1:2016

* Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method

C

ISO 3917:2016 * Road vehicles — Safety glazing materi-als — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering

B

TC 23 Tractors and machinery for agri-culture and forestry

ISO 5131:2015 Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method

C

ISO 11001-1:2016

Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler

B

TC 29 Small tools

ISO/TS 13399-204:2016

* Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming

C

ISO/TS 13399-303:2016

* Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills

E

ISO/TS 13399-304:2016

* Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole

E

ISO/TS 13399-307:2016

* Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts

G

ISO/TS 13399-308:2016

* Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts

F

ISO/TS 13399-312:2016

* Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts

F

ISO/TS 13399-401:2016

* Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items

E

ISO 22917:2016

Precision superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride

C

ISO 16916:2016

Tools for moulding — Tool specification sheet for injection moulds

B

TC 34 Food products

ISO 13904:2016

Animal feeding stuffs — Determination of tryptophan content

C

ISO 6885:2016 Animal and vegetable fats and oils — Determination of anisidine value

B


ISO 6886:2016 * Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test)

C

ISO 27608:2010/Amd 1:2016

Animal and vegetable fats and oils — Determination of Lovibond® colour — Automatic method — Amendment 1

XZ

ISO 5495:2005/Amd 1:2016

Sensory analysis — Methodology — Paired comparison test — Amendment 1

XZ


ISO 2811-1:2016

Paints and varnishes — Determina-tion of density — Part 1: Pycnometer method

B

ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion

B

TC 37 Terminology and other language and content resources

ISO 24617-6:2016

* Language resource management — Semantic annotation framework — Part 6: Principles of semantic annotation (SemAF Principles)

E

TC 39 Machine tools

ISO 230-2:2014/Amd 1:2016

Test code for machine tools — Part 2: Determination of accuracy and repeat-ability of positioning of numerically controlled axes — Amendment 1

XZ

ISO 230-10:2016

Test code for machine tools — Part 10: Determination of the measuring perfor-mance of probing systems of numeri-cally controlled machine tools

F

TC 43 Acoustics

ISO 16283-3:2016

Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation

F


ISO/TS 18166:2016

Numerical welding simulation — Ex-ecution and documentation

D

ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements

F

ISO 9454-1:2016

Soft soldering fluxes — Classification and requirements — Part 1: Classifica-tion, labelling and packaging

B


ISO 289-2:2016

Rubber, unvulcanized — Determina-tions using a shearing-disc viscometer — Part 2: Determination of pre-vulcani-zation characteristics

B

ISO 18898:2016

Rubber — Calibration and verification of hardness testers

D

ISO 23233:2016

Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc

B


ISO 11799:2015

Information and documentation — Document storage requirements for archive and library materials

B

ISO/TS 18344:2016

* Effectiveness of paper deacidification processes

C

TC 58 Gas cylinders

ISO 11119-4:2016

* Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fi-bre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners

F

TC 61 Plastics

ISO 4892-3:2016

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

C

ISO/TR 18486:2016

* Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

B

ISO 17855-2:2016

Plastics — Polyethylene (PE) mould-ing and extrusion materials — Part 2: Preparation of test specimens and determination of properties

B

ISO 19069-2:2016

Plastics — Polypropylene (PP) mould-ing and extrusion materials — Part 2: Preparation of test specimens and determination of properties

B

ISO 18188:2016

Specification of polypropylene drinking straws

B

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 16904:2016

* Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals

G

ISO 17348:2016

* Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment

C

ISO 17349:2016

* Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures

F

ISO 21809-3:2016

* Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings

H

ISO 19901-5:2016

* Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction

G


ISO 7870-6:2016

Control charts — Part 6: EWMA control charts

D

TC 70 Internal combustion engines


ISO 4548-14:2016

Methods of test for full-flow lubricat-ing oil filters for internal combustion engines — Part 14: Cold start simula-tion and hydraulic pulse durability for composite filter housings

A

TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use

ISO 8362-5:2016

Injection containers and accessories — Part 5: Freeze drying closures for injection vials

B

TC 83 Sports and other recreational facilities and equipment

ISO 20187:2016

* Inflatable play equipment — Safety requirements and test methods

F

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 11665-9:2016

Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials

F

ISO 16637:2016

* Radiological protection — Monitoring and internal dosimetry for staff mem-bers exposed to medical radionuclides as unsealed sources

E

TC 92 Fire safety

ISO 9705-1:2016

Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

F

TC 94 Personal safety -- Protective clothing and equipment

ISO 17491-4:2008/Amd 1:2016

Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) — Amendment 1

XZ

TC 96 Cranes

ISO 8566-2:2016

Cranes — Cabins and control stations — Part 2: Mobile cranes

A

ISO 9926-3:2016

Cranes — Training of operators — Part 3: Tower cranes

A

TC 102 Iron ore and direct reduced iron

ISO/TR 18336:2016

* Guidelines for good XRF laboratory practice for the iron ore industry

E

TC 106 Dentistry

ISO 9693-2:2016

Dentistry — Compatibility testing — Part 2: Ceramic-ceramic systems

B

TC 107 Metallic and other inorganic coatings

ISO 11177:2016

Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing

A

ISO 18555:2016

* Metallic and other inorganic coatings — Determination of thermal conductiv-ity of thermal barrier coatings

C

ISO 28721-5:2016

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and characterization of defects

C

TC 108 Mechanical vibration, shock and condition monitoring

ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Require-ments for instruments for measuring vibration severity

C

ISO 16063-21:2003/Amd 1:2016

* Methods for the calibration of vibration and shock transducers — Part 21: Vi-bration calibration by comparison to a reference transducer — Amendment 1

XZ

ISO 14835-1:2016

Mechanical vibration and shock — Cold provocation tests for the assess-ment of peripheral vascular function — Part 1: Measurement and evaluation of finger skin temperature

B


ISO 10896-2:2016

* Rough-terrain trucks — Safety require-ments and verification — Part 2: Slew-ing trucks

F

TC 113 Hydrometry

ISO/TR 21414:2016

* Hydrometry — Groundwater — Surface geophysical surveys for hydrogeologi-cal purposes

G

TC 119 Powder metallurgy

ISO 4499-3:2016

* Hardmetals — Metallographic deter-mination of microstructure — Part 3: Measurement of microstructural fea-tures in Ti (C, N) and WC/cubic carbide based hardmetals

D

ISO 4499-4:2016

* Hardmetals — Metallographic deter-mination of microstructure — Part 4: Characterisation of porosity, carbon defects and eta-phase content

B


ISO 5360:2016 Anaesthetic vaporizers — Agent-spe-cific filling systems

D

ISO 80601-2-13:2011/Amd 1:2015

Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amend-ment 1

XZ

ISO 14408:2016

Tracheal tubes designed for laser sur-gery — Requirements for marking and accompanying information

B

ISO 7396-1:2016

Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum

H

ISO 11197:2016

Medical supply units

D



ISO 15171-2:2016

Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Cou-pling with M16 x 2 end for connection under pressure

B

TC 135 Non-destructive testing

ISO 12707:2016

Non-destructive testing — Magnetic particle testing — Vocabulary

A


ISO 8639:2016 * Glass-reinforced thermosetting plas-tics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints

B

TC 147 Water quality

ISO 19827:2016

* Water quality — Determination of the acute toxicity to the freshwater rotifer Brachionus calyciflorus

C

TC 159 Ergonomics

ISO 9241-161:2016

Ergonomics of human-system interac-tion — Part 161: Guidance on visual user-interface elements

G

ISO 9241-391:2016

Ergonomics of human-system inter-action — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures

C

TC 160 Glass in building

ISO 1288-1:2016

* Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass

C

ISO 1288-2:2016

* Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat speci-mens with large test surface areas

C

ISO 1288-3:2016

* Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)

B

ISO 1288-4:2016

* Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass

B

ISO 1288-5:2016

* Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat speci-mens with small test surface areas

B

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO 23551-8:2016

* Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls

B


ISO 14490-3:2016

* Optics and photonics — Test methods for telescopic systems — Part 3: Test methods for telescopic sights

C

ISO 11145:2016

Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols

D

TC 181 Safety of toys

ISO/TR 8124-8:2016

* Safety of toys — Part 8: Age determi-nation guidelines

F

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 10378:2016

* Copper, lead and zinc sulfide concen-trates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method

F


ISO 10303-21:2016

* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 21: Implementation methods: Clear text encoding of the exchange structure

A

TC 188 Small craft

ISO 11592-1:2016

Small craft — Determination of maxi-mum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m

B

TC 190 Soil quality

ISO 15009:2016

Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption

D

ISO 17586:2016

Soil quality — Extraction of trace ele-ments using dilute nitric acid

C

ISO 22155:2016

Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method

D

TC 194 Biological and clinical evaluation of medical devices

ISO 22442-1:2015

Medical devices utilizing animal tissues and their derivatives — Part 1: Applica-tion of risk management

E

ISO 22442-2:2015

Medical devices utilizing animal tissues and their derivatives — Part 2: Controls on sourcing, collection and handling

C


ISO 15883-7:2016

* Washer-disinfectors — Part 7: Require-ments and tests for washer-disinfec-tors employing chemical disinfection for non-invasive, non-critical thermo-labile medical devices and healthcare equipment

E

TC 204 Intelligent transport systems

ISO 14296:2016

* Intelligent transport systems — Exten-sion of map database specifications for applications of cooperative ITS

H

TC 207 Environmental management

ISO 14004:2016

Environmental management sys-tems — General guidelines on implementation

G


TC 210 Quality management and cor-responding general aspects for medical devices

ISO 13485:2016

Medical devices — Quality manage-ment systems — Requirements for regulatory purposes

F

TC 217 Cosmetics

ISO 16128-1:2016

Guidelines on technical definitions and criteria for natural and organic cos-metic ingredients and products — Part 1: Definitions for ingredients

B

TC 218 Timber

ISO 8903:2016 * Broadleaved sawn timber — Nominal sizes

A

TC 261 Additive manufacturing

ISO/ASTM 52915:2016

Specification for Additive Manufactur-ing File Format (AMF) Version 1.2

D

TC 299 Robots and robotic devices

ISO/TS 15066:2016

* Robots and robotic devices — Col-laborative robots

E

TMBG Technical Management Board - groups

ISO/IEC 80079-38:2016

* Explosive atmospheres — Part 38: Equipment and components in ex-plosive atmospheres in underground mines

H

ISO/IEC 80079-20-2:2016

* Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods

H

IULTCS International Union of Leather Technologists and Chemists Societies

ISO 2417:2016 Leather — Physical and mechanical tests — Determination of the static absorption of water

A

ISO 2589:2016 Leather — Physical and mechanical tests — Determination of thickness

A

ISO 3377-2:2016

Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear

A

ISO 17229:2016

Leather — Physical and mechanical tests — Determination of water vapour absorption

A

ISO 17236:2016

Leather — Physical and mechanical tests — Determination of extension set

A

ISO 19070:2016

Leather — Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather

A

ISO 19071:2016

Leather — Chemical tests — Determi-nation of chromium (VI) and the reduc-tive potential for chromium tanning agents

A


ISO/IEC 14651:2016

* Information technology — Interna-tional string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering

F

ISO/IEC/IEEE 8802-1X:2013/Amd 1:2016

* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Part 1X: Port-based network access control — Amendment 1: MAC security key agreement protocol (MKA) extensions

H

ISO/IEC 14543-3-11:2016

* Information technology — Home electronic system (HES) — Part 3-11: Frequency Modulated Wireless Short-Packet (FMWSP) protocol optimised for energy harvesting — Architecture and lower layer protocols

D

ISO/IEC 27000:2016

* Information technology — Security techniques — Information security management systems — Overview and vocabulary

E

ISO/IEC 28360:2015

* Information technology — Office equipment — Determination of chemi-cal emission rates from electronic equipment

F

ISO/IEC 28360:2015/Cor 1:2016

* Information technology — Office equipment — Determination of chemi-cal emission rates from electronic equipment — Technical Corrigendum 1

free

ISO/IEC 23001-7:2016

* Information technology — MPEG systems technologies — Part 7: Com-mon encryption in ISO base media file format files

D

ISO/IEC 15418:2016

* Information technology — Automatic identification and data capture tech-niques — GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance

A

ISO/IEC 19762:2016

* Information technology — Automatic identification and data capture (AIDC) techniques — Harmonized vocabulary

H

Standards confirmed

The following International Standards are confimred for a five year period:


ISO 3039:2010

TC 8 Ships and marine technology

ISO 3796:1999 (reconfirmed)


TC 11 Boilers and pressure vessels

ISO 16528-1:2007 (reconfirmed)


TC 17 Steel






ISO 8641:2008

ISO 8642:2008

TC 27 Solid mineral fuels






ISO 562:2010



ISO 687:2010


ISO 1171:2010

ISO 7404-2:2009

ISO 7404-3:2009

ISO 7404-5:2009

ISO 17246:2010

ISO 29541:2010

TC 29 Small tools



ISO 8695:2010





TC 30 Measurement of fluid flow in closed conduits


TC 33 Refractories


TC 34 Food products

ISO 17997-1:2004

ISO 17997-2:2004

TC 43 Acoustics

ISO 10140-2:2010

ISO 10140-3:2010

ISO 10140-5:2010

TC 106 Dentistry



ISO 3691-5:2014

TC 113 Hydrometry






ISO 28178:2009


ISO 21018-1:2008

TC 132 Ferroalloys

ISO 310:1992

ISO 312:1986

ISO 315:1984

ISO 317:1984

ISO 320:1981

ISO 548:1981

ISO 549:1981

ISO 619:1981

ISO 4293:1982

ISO 4295:1988

ISO 4296-1:1984

ISO 4296-2:1983

ISO 4297:1978

ISO 4298:1984

ISO 4299:1989

ISO 4571:1981

ISO 5889:1983

ISO 5890:1981

ISO 5975:1983

ISO 5997:1984

ISO 6127:1981

ISO 6129:1981

ISO 6130:1985

ISO 6153:1989

ISO 6154:1989

ISO 6230:1989

ISO 6233:1983

ISO 6331:1983

ISO 6629:1981

ISO 7723:1984

ISO 7953:1985

ISO 7969:1985

ISO 7990:1985

ISO 8530:1986

ISO 8531:1986

ISO 8541:1986

ISO 8542:1986

ISO 8889:1988

ISO 9292:1988

ISO 9681:1990

TC 147 Water quality

ISO 11704:2010





ISO 15004-2:2007

TC 173 Assistive products for persons with disability

ISO 7176-9:2009

TC 193 Natural gas











TC 201 Surface chemical analysis


ISO 14237:2010

TC 221 Geosynthetics





ISO/IEC 11581-6:1999

(reconfirmed)

ISO/IEC 14754:1999

(reconfirmed)

ISO/IEC 15411:1999

(reconfirmed)

ISO/IEC 15412:1999

(reconfirmed)

ISO/IEC TS 20071-11:2012

Standards withdrawn



ISO 6965:1982 (replaced by )

TC 22 Road vehicles

ISO 15765-3:2004 (replaced by ISO 14229-3:2012)

TC 23 Tractors and machinery for agriculture and forestry


ISO 11788-1:1997 (replaced by )



TC 43 Acoustics


ISO 140-5:1998 (replaced by ISO 16283-1:2014, ISO 16283-3:2016)

TC 61 Plastics



TC 92 Fire safety

ISO 9705:1993 (replaced by ISO 9705-1:2016)

TC 106 Dentistry

ISO 9693:1999 (replaced by ISO 9693-1:2012, ISO 9693-2:2016)

ISO 9693:1999/Amd 1:2005

(replaced by ISO 9693-1:2012, ISO 9693-2:2016)



ISO 3691:1980/Amd 1:1983

(replaced by )

TC 119 Powder metallurgy




TC 188 Small craft


TC 210 Quality management and correspond-ing general aspects for medical devices

ISO/TR 14969:2004

(replaced by ISO 13485:2016)

TC 226 Materials for the production of primary aluminium












ISO/IEC 19762-1:2008

(replaced by ISO/IEC 19762:2016)

ISO/IEC 19762-2:2008


ISO/IEC 19762-3:2008


ISO/IEC 19762-4:2008


ISO/IEC 19762-5:2008


Meeting calendar

(update at 01 February 2016)

Meetings called for the month of January are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

March 2016

11-12 London (United Kingdom)

TC 225 Market, opinion and social research

14-18 Paris (France) TC 34/SC 18 Food products/Cocoa

14-18 Kanazawa (Japan)

TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing


14-18 Sydney (Australia)

TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures


TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

15 Geneva (Switzerland)

President's committee


15 Basel (Switzerland)

TC 114/SC 3 Horology/Water-resistant watches

15-17 Shanghai (China) TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis


CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)


CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

17 Milan (Italy) TC 221 Geosynthetics

17-18 Geneva (Switzerland)

COUNCIL Council

April 2016

4 New Delhi (India) TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology

4-5 Beijing (China) TC 117 Fans


JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

4-8 New Delhi (India) TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection

4-8 Moscow (Rus-sian Federation)

TC 262 Risk management

5 Delft (Netherlands)

TC 219 Floor coverings

5-6 Courbevoie, Paris (France)

TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes


* TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics

7 New Delhi (India) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection

11-12 Milan (Italy) TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

11-14 Copenhagen (Denmark)

TC 108 Mechanical vibration, shock and condition monitoring


TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments

11-15 Sundsvall (Sweden)

PC 287 Chain of custody of wood and wood-based products


** TC 178 Lifts, escalators and moving walks

12 Paris (France) * TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors

13 Paris (France) TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests

14 Beauvais (France)

TC 23 Tractors and machin-ery for agriculture and forestry

14 Linz (Austria) TC 92/SC 3 Fire safety/Fire threat to people and environment

14 Copenhagen (Denmark)

TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems

15 Vienna (Austria) * TC 270 Plastics and rubber machines

18 Helsinki (Finland) TC 300 Solid recovered fuels

18-19 Tampa, Florida (USA)

JTC 1/SC 27 Information tech-nology/IT Security techniques

19-21 Singapore (Singapore)

PC 294 Guidance on unit pricing

20-21 Saint-Denis (France)

TC 17/SC 3 Steel/Steels for struc-tural purposes

22-23 Clausthal-Zeller-feld (Germany)

TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

24-29 Concord, Cali-fornia (USA)

* TC 204 Intelligent transport systems

25 Frankfurt (Germany)

TC 68/SC 4 Financial services/Securities and related financial instruments

25-29 Berlin (Germany) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

26 Sao Jose dos Campos (Brazil)

* TC 20/SC 13 Aircraft and space vehicles/Space data and information trans-fer systems


TC 68/SC 7 Financial services/Core banking



TC 68/SC 2 Financial services/Financial Services, security


* TC 68 Financial services

28-29 Las Vegas (USA) TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems

29 Kuala Lumpur (Malaysia)

TC 238 Solid biofuels

May 2016


PC 277 Sustainable procurement

2-6 Amsterdam (Netherlands)

* TC 215 Health informatics

3-5 Dubaï (United Arab Emirates)

CASCO Committee on con-formity assessment

5-6 Milan (Italy) TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment

5-6 Laramie (USA) TC 265 Carbon dioxide capture, transporta-tion, and geological storage

6-13 Berlin (Germany) TC 10 Technical product documentation

7 Berlin (Germany) TC 10/SC 10 Technical product documentation/Process plant documentation

9-11 Paris (France) TC 34/SC 9 Food products/Microbiology

9-13 Stuttgart (Germany)

TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

9-13 Wellington (New Zealand)



TC 46/SC 4 Information and documentation/Tech-nical interoperability


TC 46/SC 11 Information and doc-umentation/Archives/records management

9-13 (USA) ** TC 276 Biotechnology

10 Berlin (Germany) TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

10 Virtual (Unknown)

TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

10 Seoul (Korea, Republic of)

TC 122/SC 3 Packaging/Perfor-mance requirements and tests for means of packaging, pack-ages and unit loads (as required by ISO/TC 122)

10-12 Barcelona (Spain)

TC 147/SC 3 Water qual-ity/Radioactivity measurements

11 Berlin (Germany) TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation


TC 44/SC 12 Welding and allied processes/Soldering materials

11 (Portugal) ** TC 87 Cork

11 Seoul (Korea, Republic of)

TC 122 Packaging

12 Berlin (Germany) * TC 10/SC 1 Technical product documentation/Basic conventions

13 Shanghai (China) * TC 149/SC 1 Cycles/Cycles and major sub-assemblies

16-20 Suzhou (China) JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance

16-20 Chicago (USA) TC 121 Anaesthetic and res-piratory equipment

16-20 Chicago (USA) * TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment

16-20 Chicago (USA) * TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems

17-20 Yokohama (Japan)

TC 22/SC 39 Road vehicles/Ergonomics

18 Essen (Germany) TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel

18 Chicago (USA) TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines

19 Yokohama (Japan)

* TC 22/SC 35 Road vehicles/Light-ing and visibility

19-20 Essen (Germany) * TC 44/SC 10 Welding and allied processes/Quality management in the field of welding

19-20 Tokyo (Japan) TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

22-27 Sapporo (Japan) TC 184/SC 4 Automation systems and integration/Indus-trial data

23-25 Rome (Italy) TC 145 Graphical symbols

23-27 Suzhou (China) * JTC 1/SC 7 Information technol-ogy/Software and systems engineering

23-27 Beijing (China) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

23-27 Tokyo (Japan) TC 35 Paints and varnishes

23-27 Berlin (Germany) TC 130 Graphic technology


24 Madrid (Spain) TC 5/SC 5 Ferrous metal pipes and metallic fittings/Threaded fittings, sol-der fittings, welding fittings, pipe threads, thread gauges

24 Rome (Italy) TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours

24 Rome (Italy) TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment

24-26 Reykjavik (Iceland)

TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection

25 Ghent (Belgium) TC 115 Pumps

26 New York (USA) * TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

26-27 (Malaysia) TC 228 Tourism and related services

27 Rome (Italy) * TC 22/SC 38 Road vehicles/Motor-cycles and mopeds

Atlanta (USA) ** TC 86 Refrigeration and air-conditioning

Mexico City (Mexico)

** TC 289 Brand evaluation

May-June 2016

23-24 Duisburg (Germany)

* TC 34/SC 4 Food products/Cere-als and pulses


* TC 34/SC 5 Food products/Milk and milk products

31-2 Lulea (Sweden) TC 102/SC 1 Iron ore and direct re-duced iron/Sampling

31-2 Lulea (Sweden) TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis

31-2 Lulea (Sweden) TC 102/SC 3 Iron ore and direct reduced iron/Physical testing

June 2016


* JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information

6-7 Heerbrugg (Switzerland)

TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

6-8 Paris (France) TC 220 Cryogenic vessels

6-10 Hokaido (Japan) * JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques


* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols


* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management


* TC 69/SC 5 Applications of sta-tistical methods/Ac-ceptance sampling


* TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results


* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma


* TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development

7 Winterthur (Switzerland)

TC 5/SC 11 Ferrous metal pipes and metallic fittings/Metal hoses and expansion joints

7-9 Turin (Italy) * TC 274 Light and lighting

7-10 Prague (Czech Republic)

TC 156 Corrosion of metals and alloys

9 Aachen (Germany)

TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes

9-16 Portland, Maine (USA)

* JTC 1/SC 28 Information technol-ogy/Office equipment

10 London (United Kingdom)

* TC 69 Applications of statis-tical methods




13 Stockholm (Sweden)

TC 242 Energy Management

13-17 (Japan) ** TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation

13-17 (Japan) ** TC 282/SC 2 Water reuse/Water reuse in urban areas

13-17 (Japan) ** TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems


* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

14-17 Ekaterinburg (Russian Federation)

** REMCO Committee on refer-ence materials


TMB Technical Manage-ment Board

15-17 Berlin (Germany) TC 44/SC 14 Welding and allied processes/Weld-ing and brazing in aerospace


COPOLCO Committee on con-sumer policy

16-17 Tromsø (Norway) * TC 211 Geographic in-formation/Geomatics

18-20 Munich (Germany)

TC 135 Non-destructive testing


* TC 135/SC 3 Non-destructive test-ing/Ultrasonic testing



* TC 135/SC 4 Non-destructive testing/Eddy current methods


* TC 135/SC 5 Non-destructive testing/Radiation methods


* TC 135/SC 6 Non-destructive test-ing/Leak detection methods


* TC 135/SC 7 Non-destructive testing/Personnel qualification


* TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

20-21 Berlin (Germany) * TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects

20-23 Delft (Netherlands)

TC 272 Forensic sciences

20-24 Frankfurt (Germany)

** JTC 1/SC 39 Information technol-ogy/Sustainability for and by Information Technology

20-24 Tedding-ton (United Kingdom)

TC 43/SC 3 Acoustics/Underwa-ter acoustics

20-25 Prague (Czech Republic)

* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

21 Istanbul (Turkey) * TC 120 Leather

21 Istanbul (Turkey) * TC 120/SC 3 Leather/Leather products

21-22 Düsseldorf (Germany)

TC 17/SC 10 Steel/Steel for pres-sure purposes

21-22 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment

22 Istanbul (Turkey) * TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts

22-23 Porto (Portugal) TC 17/SC 17 Steel/Steel wire rod and wire products

22-23 Porto (Portugal) TC 269 Railway applications

23 Schonach (Germany)

** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

23 Istanbul (Turkey) * TC 120/SC 2 Leather/Tanned leather

24 Porto (Portugal) * TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets

27 Nicosia (Cyprus) * TC 193 Natural gas

27-28 Frankfurt (Germany)


29-30 Beijing (China) * TC 20/SC 16 Aircraft and space vehicles/Unmanned aircraft systems


* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

(Canada) ** TC 159/SC 1 Ergonomics/General ergonomics principles

June-July 2016


** TC 37 Terminology and other language and content resources


* TC 188 Small craft

27-1 Nicosia (Cyprus) * TC 193/SC 1 Natural gas/Analysis of natural gas

27-1 Nicosia (Cyprus) * TC 193/SC 3 Natural gas/Upstream area

27-1 (Unknown) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

27-1 Hangzhou (China)

** TC 268 Sustainable develop-ment in communities


** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

1st Semester 2016

New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

July 2016

4-8 Paris (France) ** TC 34 Food products

5-8 Shanghai (China) * TC 8/SC 8 Ships and marine technology/Ship design

14 Tokyo (Japan) * TC 261 Additive manufacturing

15 Greenville (USA) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment

(Australia) ** TC 281 Fine Bubble Technology

August 2016

19 Berlin (Germany) ** TC 206 Fine ceramics

22-26 Beijing (China) * JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation


* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)


* TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

(USA) ** TC 91 Surface active agents

September 2016



5-9 Bilbao (Spain) * TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock

5-10 Changsha (China)

* TC 96/SC 6 Cranes/Mobile cranes



* TC 147 Water quality

9 Beijing (China) President's committee


10 Beijing (China) TMB Technical Manage-ment Board

10-16 San José, Cali-fornia (USA)

* TC 130 Graphic technology

11 Beijing (China) * COUNCIL Council

11 Beijing (China) DEVCO Committee on devel-oping country matters

11-16 Tromsø (Norway) * TC 106/SC 1 Dentistry/Filling and restorative materials

11-16 Tromsø (Norway) * TC 106/SC 2 Dentistry/Prosthodon-tic materials

11-16 Tromsø (Norway) * TC 106/SC 3 Dentistry/Terminology

11-16 Tromsø (Norway) * TC 106/SC 4 Dentistry/Dental instruments

11-16 Tromsø (Norway) * TC 106/SC 6 Dentistry/Dental equipment

11-16 Tromsø (Norway) ** TC 106/SC 7 Dentistry/Oral care products

11-16 Tromsø (Norway) * TC 106/SC 8 Dentistry/Dental implants

11-16 Tromsø (Norway) * TC 106/SC 9 Dentistry/Dental CAD/CAM systems

12-13 Beijing (China) * GA General Assembly

12-13 Peterbor-ough (United Kingdom)

* TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment

12-13 Stavanger (Norway)

* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

13 Beijing (China) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

17-21 Shanghai (China) * TC 2/SC 7 Fasteners/Reference standards

17-21 Shanghai (China) * TC 2/SC 11 Fasteners/Fasteners with metric external thread

17-21 Shanghai (China) * TC 2/SC 12 Fasteners/Fasteners with metric internal thread

17-21 Amman (Jordan) * TC 262 Risk management

19-20 Xian (China) * TC 33 Refractories

19-22 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases

19-23 Berlin (Germany) ** TC 61 Plastics


* TC 150 Implants for surgery

19-25 Melbourne (Australia)

* TC 165 Timber structures

20-22 Yichang (China) ** TC 256 Pigments, dyestuffs and extenders

20-22 Stockholm (Sweden)

** TC 264 Fireworks

21-23 Beijing (China) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

21-23 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables

23 Barcelona (Spain)

* TC 254 Safety of amusement rides and amusement devices

26-30 San José, Cali-fornia (USA)

* JTC 1/SC 2 Information technol-ogy/Coded character sets

26-30 Seoul (Korea, Republic of)

** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

26-30 Burlington, Ver-mont (USA)

** TC 146/SC 3 Air quality/Ambient atmospheres

26-30 Burlington, Ver-mont (USA)

** TC 146/SC 6 Air quality/Indoor air

26-30 Berlin (Germany) ** TC 163 Thermal performance and energy use in the built environment

26-30 Berlin (Germany) ** TC 205 Building environment design

26-30 (Canada) ** TC 218 Timber


* TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels

28-29 Delft (Netherlands)

* TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products


* TC 28/SC 4 Petroleum products and related prod-ucts of synthetic or biological origin/Classifications and specifications


* TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels

29-30 (France) ** TC 17 Steel


* TC 28 Petroleum products and related products of synthetic or bio-logical origin

30 Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines

30 Burlington, Ver-mont (USA)

** TC 146/SC 1 Air quality/Stationary source emissions

Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Asia) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

Burlington, Ver-mont (USA)

** TC 146/SC 2 Air quality/Workplace atmospheres

Sao Paulo (Brazil)

** TC 173 Assistive products for persons with disability


Sao Paulo (Brazil)

** TC 173/SC 1 Assistive products for persons with disability/Wheelchairs

Sao Paulo (Brazil)

** TC 209 Cleanrooms and as-sociated controlled environments

Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification

Singapore (Singapore)

** TC 260 Human resource management

3rd Quarter 2016

Seoul (Korea, Republic of)

** TC 92/SC 1 Fire safety/Fire initia-tion and growth

October 2016

2-7 Seattle (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data

2-7 Auckland (New Zealand)

* TC 204 Intelligent transport systems


* TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids

5-6 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

5-7 Madrid (Spain) * TC 225 Market, opinion and social research

6 Virtual (Unknown)

* President's committee


6 (Unknown) ** TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

6-7 Berlin (Germany) ** TC 119 Powder metallurgy

10-13 (Romania) ** TC 172/SC 1 Optics and photon-ics/Fundamental standards

10-14 Hoffman Estates, Illinois (USA)

* TC 58/SC 2 Gas cylinders/Cylin-der fittings

10-14 Tokyo (Japan) ** TC 153 Valves


* TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

14 Hangzhou (China)

* TC 70 Internal combustion engines

17-21 Berlin (Germany) ** JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

17-21 (China) ** TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints

17-21 (China) ** TC 5/SC 10 Ferrous metal pipes and metallic fittings/Metallic flanges and their joints

17-21 Moscow (Rus-sian Federation)

* TC 20 Aircraft and space vehicles


* TC 58/SC 3 Gas cylinders/Cylin-der design

17-21 Kyoto (Japan) * TC 138 Plastics pipes, fittings and valves for the transport of fluids

17-21 Berlin (Germany) * TC 181 Safety of toys

19-21 Philadelphia (USA)

** TC 202 Microbeam analysis

20-21 Tokyo (Japan) ** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete


* TC 58 Gas cylinders

20-21 Vienna (Austria) * TC 227 Springs

21 (China) ** TC 5 Ferrous metal pipes and metallic fittings

22-23 Orlando (USA) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

24 Tokyo (Japan) * TC 79/SC 9 Light metals and their alloys/Symbolization

24-26 Tokyo (Japan) ** TC 79/SC 11 Light metals and their alloys/Titanium

24-28 Tokyo (Japan) ** TC 79 Light metals and their alloys

24-28 Tokyo (Japan) ** TC 164 Mechanical testing of metals


* TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

24-28 (New Caledonia) ** TC 190/SC 4 Soil quality/Biological methods

24-28 Athens (Greece) * TC 258 Project, programme and portfolio management

25 Tokyo (Japan) * TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots

25 Tokyo (Japan) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys

26-27 Osaka (Japan) * TC 126 Tobacco and tobacco products

26-28 (United Kingdom)

** TC 123 Plain bearings

26-28 Tokyo (Japan) * TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

27 Tokyo (Japan) * TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

27-28 Orlando (USA) ** TC 17/SC 12 Steel/Continuous mill flat rolled products

Berlin (Germany) ** TC 59 Buildings and civil engineering works

Berlin (Germany) ** TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

London (United Kingdom)

** TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters


(Korea, Repub-lic of)

** TC 201 Surface chemical analysis

Tel Aviv (Israel) ** TC 282 Water reuse

Tel Aviv (Israel) ** TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems

October-November 2016

30-4 Langkawi (Malaysia)

** TC 45 Rubber and rubber products


* TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection

November 2016

1-4 Troy (USA) ** TC 22/SC 36 Road vehicles/Safety and impact testing


* TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction


* TC 241 Road traffic safety management systems


* TC 98 Bases for design of structures

7-12 Lillehammer (Norway)

** JTC 1 Information technology

8-10 Kobe (Japan) * TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

10-11 Bern (Switzerland)

* TC 34/SC 12 Food products/Sen-sory analysis

13-17 (Norway) ** TC 215 Health informatics

14-18 Toronto (Canada) * TC 44 Welding and allied processes

16 Toronto (Canada) * TC 46/SC 9 Information and documentation/Identification and description

17-18 Orlando (USA) * TC 299 Robots and robotic devices


* TC 281 Fine Bubble Technology

Christchurch (New Zealand)

** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

(China) ** TC 134 Fertilizers and soil conditioners

December 2016


* TC 217 Cosmetics

8-9 Petten (Netherlands)

TC 197 Hydrogen technologies

9 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

4th Quarter 2016

(India) ** TC 113 Hydrometry

2nd Semester 2016

(Europe) ** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

(Europe) ** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

(Europe) ** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

Florence (Italy) ** TC 160 Glass in building

Florence (Italy) ** TC 160/SC 1 Glass in build-ing/Product considerations

Florence (Italy) ** TC 160/SC 2 Glass in building/Use considerations

Month unknown 2016


** JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage

(Sweden) ** TC 102 Iron ore and direct reduced iron

(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates

January 2017

16-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings

February 2017

6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

March 2017

6 Kyoto (Japan) ** TC 60 Gears


** COUNCIL Council

April 2017

10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding

(Unknown) ** TC 34/SC 15 Food products/Coffee

(China) ** TC 215 Health informatics

May 2017

15-19 Washington, D.C (USA)

* TC 4 Rolling bearings

(Sweden) ** TC 29 Small tools

(Unknown) ** TC 226 Materials for the production of primary aluminium

June 2017

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(USA) ** TC 42 Photography

2nd Quarter 2017

(North America) ** TC 31 Tyres, rims and valves

(North America) ** TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims

(North America) ** TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

Tsukuba (Japan) ** TC 92 Fire safety

July 2017


(Unknown) ** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

August 2017

31 Raleigh (USA) * TC 38/SC 23 Textiles/Fibres and yarns

Raleigh (USA) ** TC 38 Textiles

September 2017

18 Berlin (Germany) * COUNCIL Council

20-22 Berlin (Germany) ** GA General Assembly

25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings

(China) ** JTC 1/SC 2 Information technol-ogy/Coded character sets


** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

Vienna (Austria) ** TC 165 Timber structures

New Delhi (India) ** TC 178 Lifts, escalators and moving walks

(Japan) ** TC 213 Dimensional and geometrical product specifications and verification

(Nigeria) ** TC 260 Human resource management

3rd Quarter 2017

Vienna (Austria) ** TC 289 Brand evaluation

October 2017

2-7 Vladivostok (Russian Federation)

* JTC 1 Information technology

22-27 Hawaii (USA) * TC 45 Rubber and rubber products

November 2017

(India) ** TC 54 Essential oils


** TC 215 Health informatics

Month unknown 2017

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Erlangen (Germany)

** TC 36 Cinematography

(South Africa) ** TC 46 Information and documentation

(South Africa) ** TC 46/SC 11 Information and doc-umentation/Archives/records management

(United Kingdom)

** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

Seoul (Korea, Republic of)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

(USA) ** TC 198 Sterilization of health care products

Milan (Italy) ** TC 206 Fine ceramics

February 2018

12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

June 2018


** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

September 2018

(Japan) ** TC 61 Plastics

3rd Quarter 2018

(Netherlands) ** TC 92 Fire safety

October 2018

(Malaysia) ** TC 215 Health informatics

Month unknown 2018

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

(China) ** TC 45 Rubber and rubber products

(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

Milan (Italy) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

Month unknown 2019

(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Month unknown 2020

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Documents

ISO Update · PDF fileISO Update, Supplement to ISO Focus -- March 2016 1. International Standards in process. ... ISO/CD 17123-9 Optics and optical instruments — Field proce