www.aef-inc.com1921 Petra Lane Placentia, CA 92870 USArickb@aef-inc.com

+1 (714) 854-1300

AEF Model NumberDCT-04-09DCT-04-13DCT-04-16DCT-05-09DCT-05-13DCT-05-16DCT-06-09DCT-06-09DCT-06-13DCT-06-16DCT-07-09DCT-07-13DCT-07-16

1111111111111

4445556666777

365264456580545478966391112

28”39”48”28”39”48”28”28”39”48”28”39”48”

10 GA10 GA10 GA10 GA10 GA10 GA10 GA10 GA10 GA10 GA10 GA10 GA10 GA

Qty of Doors

Qty of Cartridges

CartridgeLength

BodyThickness

Cloth AreaSq. Ft.

DUST COLLECTOR OPTIONS • Selection of Different Filter Cartridge Materials o Polyester Felt o Egg Shell Surface o PTFE o o High Heat materials o And More...• Differential Pressure Switch or Transmitter• Broken Cartridge Detector• Explosion Protection•• Carbon or Stainless Steel Construction• FDA Interior Epoxy Coating• Exhaust Fan• Custom Colors

OPTIONS/FEATURESDUST COLLECTOR TUBULAR SIZES

When dusty air enters the dust collector from a silo or surge bin, the air passes through a wall of filtration material, depositing any dust on the filter cartridge exterior. After passing through the cartridge, the clean, filtered air is exhausted to atmosphere. After time the deposited dust must be removed from the cartridge walls. This is done through a quick pulse of compressed air traveling through a quick pulse of compressed air traveling through a venturi to produce a shockwave which knocks the dust from the cartridge wall. The tubular design offers a style that does not require confined space permits in most applications. Changing the filter is much cleaner and easier than traditional bottom load filters.Standard construction for a dust collector consists of a carbon steel welded body, interior safety grid, tool free 22” x 40” hinged maintenance door, exhaust vent, lifting lugs, and AEF white exterior. Cartridge cleaning is accomplished through an auto sequence reverse pulse timer housed in a NEMA-4 blow down en-closure. Cartridge condition can easily be monitored using the included pressure differential indicator.

DUST COLLECTORS -TUBULAR