10
DUST COLLECTOR THE ANATOMY OF A AIR POLLUTION CONTROL

Anatomy of a Dust Collector

Embed Size (px)

Citation preview

Page 1: Anatomy of a Dust Collector

DUST COLLECTORTHE ANATOMY OF A

AIR POLLUTION CONTROL

Page 2: Anatomy of a Dust Collector

FARR GOLD SERIES® DUST COLLECTORSThe Farr Gold Series cartridge dust and fume extractor combines enhanced performance with ease of service while cleaning the work environment of irritating dust and fumes.

But what features make our dust collector work so well?

Page 3: Anatomy of a Dust Collector

FANFILTER CLEANING SYSTEM

FILTER MODULECARTRIDGE FILTERACCESS DOORS

FILTER CHANGE-OUT ACCESS PLATFORM

HOPPER VIEW PORT

HOPPER

ROTARY AIRLOCKLEG SUPPORT STRUCTURE

DUST DISCHARGE POINT

CONTROL PANEL

55 GALLON DRUM OVERVIEW

Page 4: Anatomy of a Dust Collector

FILTER MODULEUpper part of the dust collector

housing that contains the cartridge

filters, filter access doors and filter

cleaning system (compressed air

reservoir, purge pipes, solenoid and

diaphragm valves).

Page 5: Anatomy of a Dust Collector

HOPPERLower part of the dust collector that

funnels dust that is captured in the

collector down into a disposal channel or

device. In the photo above, collected dust

is discharging through a rotary airlock

and down into a large, common bin on a

lower level. 55-gallon drums are common

discharge devices that connect directly to

the hopper with a flexible hose.

Page 6: Anatomy of a Dust Collector

LEG SUPPORT STRUCTURESupports the entire dust collector

housing. Typically designed for seismic

zone 3 and 100 mph wind load.

Page 7: Anatomy of a Dust Collector

CONTROL PANELFilters are automatically back-flush cleaned

with periodic pulses of compressed air,

typically through an on-demand setting in

the electronic control panel. The control

panel sends signals to solenoid valves,

which trigger powerful blasts of air from

the compressed air reservoir through

diaphragm valves.

Page 8: Anatomy of a Dust Collector

FANThe typical arrangement of the fan

(sometimes called a blower) is to pull

air through the dust collector, creating

a suction to draw dust into the filter

module. The fan can be mounted on top,

or remotely from the dust collector via

ductwork.

Page 9: Anatomy of a Dust Collector

Tool-less quick-open access doors

to super-fast cartridge filter change-

out system that does not require

entry into the dust collector. Cam-

operated clamp bars provide filter

clamping and sealing.

CARTRIDGE FILTER ACCESS DOORS

Page 10: Anatomy of a Dust Collector

Learn about industrial dust collection!www.camfilapc.com/industry_articles

AIR POLLUTION CONTROL