DOMINANT TM Opto Technologies Power DomiLED...DWA-MKG-K3L-2 DWY-MKG-JL3-1 DWA-MKG-KL3-1 DWA-MKG-K3M-1 Part Ordering Number Color Viewing Angle˚ Luminous Flux @ IF = 50mA (lm) Appx

12/04/2018 V4.01

Features:> High brightness surface mount LED using thin film technology.> 120° viewing angle.> Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.> Qualified according to JEDEC moisture sensitivity Level 2.> Compatible to IR reflow soldering.> Environmental friendly; RoHS compliance.> Superior corrosion resistance> Compliance to automotive standard; AEC-Q101.

Power DomiLEDWith its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals.

DATA SHEET:

Power DomiLEDAlInGaP : DWx-MKG

© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.All rights reserved. Product specifications are subject to change without notice.

Applications:> Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: Turn Signal, Center High Mounted Stop Light (CHMSL), Rear Combination Lamp (RCL).

DOMINANTOpto TechnologiesInnovating Illumination

TM

2

DWS-MKG-F3J2-1DWA-MKG-KL2-4DWA-MKG-K3L-2DWY-MKG-JL3-1DWA-MKG-KL3-1DWA-MKG-K3M-1

Part OrderingNumber

Color ViewingAngle˚

Luminous Flux @ IF = 50mA (lm) Appx. 1.2Min. Typ. Max.

Optical Characteristics at Tj=25˚C

Typ. (V)Vf @ If = 50mA Appx. 3.1

Electrical Characteristics at Tj=25˚C

Max. (V)Vr @ Ir = 10uA Appx. 6.1

Min. (V)Part Number

DWx-MKG 2.25 122.65

Unit

Absolute Maximum RatingsMaximum Value

DC forward current

Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1)

Reverse voltage Appx. 6.1

ESD threshold (HBM)

LED junction temperature

Operating temperature

Storage temperature

Power dissipation (at room temperature)

Thermal resistance- Real Thermal Resistance Junction / ambient, Rth JA real Junction / solder point, Rth JS real - Electrical Thermal Resistance Junction / ambient, Rth JA el Junction / solder point, Rth JS el(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)

70

100

12

2

125

-40 … +115

-40 … +125

200

30090

24065

mA

mA

V

kV

˚C

˚C

˚C

mW

K/WK/W

K/WK/W

Min. (V)

1.90

12/04/2018 V4.0

AlInGaP : DWx-MKGDOMINANTOpto TechnologiesInnovating Illumination

TM

Super Red, 632nmAmber, 624nmAmber, 615nmYellow, 587nmAmber, 615mAmber, 615m

120120120120120120

3.228.209.356.308.209.35

5.109.35

10.709.35

10.7013.90

7.1512.2013.9013.9013.9018.10

Not for new design

3 12/04/2018 V4.0

DWS; Super Red

DWA; Amber

DWY; Yellow

Group

Wavelength Grouping at Tj= 25˚CWavelength distribution (nm) Appx. 3.1Color

Full

FullWXYZ

FullXYZ

627 - 639

612 - 627612 - 616616 - 620620 - 624624 - 627

586 - 595586 - 589589 - 592592 - 595


TM

4

Vf Bining (Optional)

Forward Voltage (V) Appx. 3.1Vf @ If = 50mA

V5A

V5B

V5C

V5D

V5E

1.90 ... 2.05

2.05 ... 2.20

2.20 ... 2.35

2.35 ... 2.50

2.50 ... 2.65

Please consult sales and marketing for special part number to incorporate Vf binning.

12/04/2018 V4.0

Brightness Group Luminous Flux Appx. 1.2

(lm)

Luminous Flux Group at Tj=25˚C

F3G2G3H2H3J2J3K2K3L2L3M2M3

3.22 ... 3.683.68 ... 4.204.20 ... 4.804.80 ... 5.505.50 ... 6.306.30 ... 7.157.15 ... 8.208.20 ... 9.35

9.35 ... 10.7010.70 ... 12.2012.20 ... 13.9013.90 ... 15.8015.80 ... 18.10


TM

5 12/04/2018 V4.0


TM

Radiation Pattern

Forward Current Vs Forward VoltageIF = f(VF); Tj = 25°C

Forward Voltage VF (V)Forward Current IF (mA)

Forw

ard

Cur

rent

I F (m

A)

Rel

ativ

e Lu

min

ous

Flux

Фre

l

Relative Luminous Flux Vs Forward CurrentФV/ФV(50mA) = f(IF); Tj = 25°C

Forw

ard

Cur

rent

I F (m

A)

Maximum Current Vs TemperatureIF=f(T)

Relative Spectral EmissionФrel = f(λ); Tj = 25°C; IF = 50mA

Rel

ativ

e Lu

min

ous

Flux

Фre

l

Wavelength λ (nm)

Allo

wab

le F

orw

ard

Cur

rent

I F( m

A )

Duty Ratio, %

Allowable Forward Current Vs Duty Ratio ( Tj = 25°C; tp ≤ 10μs )

Temperature T(°C)

0.270°

90°

80°

0

60°

50°

40°

30° 20°

0.6

0.4

1.0

0.8

10° 0°

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

0 10 20 30 40 50 60 700

10

20

30

40

50

60

70

1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

Rel

ativ

e Lu

min

ous

Flux

Фre

l

Forw

ard

Cur

rent

I FForward Current IF (mA)

Relative Lumionous Flux Vs Forward CurrentIV/IV(50mA) = f(IF); Tj = 25°C


Forward Voltage VF (V)

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750 800 850

Yellow

Amber

SuperRed

Rel

ativ

e Lu

min

ous

Flux

Фre

lRelative Spectral Emission

Irel = f(λ); Tj = 25°C; IF = 30mA

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)

Maximum Current Vs TemperatureIF = f (T)

Temperature T(°C)

TATS

0

10

20

30

40

50

60

70

80

90

0 20 40 60 80 100 120

TA = Ambient TemperatureTS = Solder Point

Allo

wab

le F

orw

ard

Cur

rent

I F( m

A )


Duty Ratio, %

10

100

1000

0.1 1 10 100

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

0 10 20 30 40 50 60 700

10

20

30

40

50

60

70

1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

Rel

ativ

e Lu

min

ous

Flux

Фre

l

Forw

ard

Cur

rent

I F

Forward Current IF (mA)




0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750 800 850

Yellow

Amber

SuperRed

Rel

ativ

e Lu

min

ous

Flux

Фre

l

Relative Spectral EmissionIrel = f(λ); Tj = 25°C; IF = 30mA

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)


Temperature T(°C)

TATS

0

10

20

30

40

50

60

70

80

90

0 20 40 60 80 100 120


Allo

wab

le F

orw

ard

Cur

rent

I F( m

A )


Duty Ratio, %

10

100

1000

0.1 1 10 100

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

0 10 20 30 40 50 60 700

10

20

30

40

50

60

70

1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

Rela

tive

Lum

inou

s Fl

ux Ф

rel

Forw

ard

Curr

ent I

F





0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750 800 850

Yellow

Amber

SuperRed

Rela

tive

Lum

inou

s Fl

ux Ф

rel


Wavelength λ (nm)

Forw

ard

Curr

ent I

F(m

A)


Temperature T(°C)

TATS

0

10

20

30

40

50

60

70

80

90

0 20 40 60 80 100 120


Allo

wab

le F

orw

ard

Curr

ent I

F( m

A )


Duty Ratio, %

10

100

1000

0.1 1 10 100

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

0 10 20 30 40 50 60 700

10

20

30

40

50

60

70

1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

Rel

ativ

e Lu

min

ous

Flux

Фre

l

Forw

ard

Cur

rent

I F





0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750 800 850

Yellow

Amber

SuperRed

Rel

ativ

e Lu

min

ous

Flux

Фre

l


Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)


Temperature T(°C)

TATS

0

10

20

30

40

50

60

70

80

90

0 20 40 60 80 100 120


Allo

wab

le F

orw

ard

Cur

rent

I F( m

A )


Duty Ratio, %

10

100

1000

0.1 1 10 100

Rela

tive

Lum

inou

s Fl

ux Ф

rel

Forw

ard

Curr

ent I

F (m

A)

Maximum Current Vs Temperature IF = f (T)

Temperature T(°C)

TA

TS

0

10

20

30

40

50

60

70

80

0 20 40 60 80 100 120

TA = Ambient Temperature TS = Solder Point

Allowable Forward Current Vs Duty Ratio

6 12/04/2018 V4.0


TM

Junction Temperature Tj(°C)

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F

(V)

Relative Forward Voltage Vs Junction Temperature∆VF = VF - VF(25°C) = f(Tj); IF =50mA


Rel

ativ

e Lu

min

ious

Flu

x Ф

rel

Relative Luminious Flux Vs Junction TemperatureФV/ФV(25°C) = f(Tj); IF = 50mA


Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)

Relative Wavelength Vs Junction Temperature∆λdom = λdom - λdom (25°C) = f(Tj); IF = 50mA

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

0.5

-50 -30 -10 10 30 50 70 90 110 130 1500.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

-50 -30 -10 10 30 50 70 90 110 130 150

Amber

SuperRed

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F

(V)

Relative Forward Voltage Vs Junction Temperature∆VF = VF - VF(25°C) = f(Tj); IF = 50mA


Rel

ativ

e Lu

min

ious

Flu

x Ф

rel

Relative Luminious Flux Vs Junction TemperatureIV/IV(25°C) = f(Tj); IF = 50mA


Yellow

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

0.5

-50 -30 -10 10 30 50 70 90 110 130 1500.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

-50 -30 -10 10 30 50 70 90 110 130 150

Amber

SuperRed

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F

(V)

Relative Forward Voltage Vs Junction Temperature∆VF = VF - VF(25°C) = f(Tj); IF = 50mA


Rel

ativ

e Lu

min

ious

Flu

x Ф

rel

Relative Luminious Flux Vs Junction TemperatureIV/IV(25°C) = f(Tj); IF = 50mA


Yellow

-8.0

-6.0

-4.0

-2.0

0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

-50 -30 -10 10 30 50 70 90 110 130 150

Amber

SuperRed

-0.05

-0.04

-0.03

-0.02

-0.01

0.00

0.01

0.02

0.03

0.04

0.05

-50 -30 -10 10 30 50 70 90 110 130 150

Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)

Relative Wavelength Vs Junction Temperature∆λdom = λdom - λdom (25°C) = f(Tj); IF = 50mA

∆Cx,

∆C

y

Chromaticity Coordinate Shift Vs Junction Temperature∆Cx, ∆Cy = f(Tj); IF = 50mA

Junction Temperature Tj(°C) Junction Temperature Tj(°C)

Yellow

Redundant

7

DomiLEDTM • AlInGaP : DWx-MKG Package Outlines

Material

Material

Lead-frame

Package

Encapsulant Soldering Leads

Cu Alloy With Au Plating

High Temperature Resistant Plastic, PPA

Silicone resin

Au Plating

12/04/2018 V4.0

Note : Primary thermal path is through Anode lead of LED package.


TM

Power DomiLED • AllnGaP : DWx-MKG Package Outlines

7

DomiLEDTM • AlInGaP : DWx-MKG Package Outlines

Material

Material

Lead-frame

Package

Encapsulant Soldering Leads

Cu Alloy With Au Plating

High Temperature Resistant Plastic, PPA

Silicone resin

Au Plating

31/10/2016 V1.0

Note : Primary thermal path is through Anode lead of LED package.


TM

8

Recommended Solder Pad

12/04/2018 V4.0


TM

8

Recommended Solder Pad

31/10/2016 V1.0


TM

9

Taping and orientation

• Reels come in quantity of 2000 units.• Reel diameter is 180 mm.

12/04/2018 V4.0


TM

10

Packaging Specification

12/04/2018 V4.0


TM

08/12/2016 V7.013


InGaN Warm White: DDF-LJGDOMINANTOpto TechnologiesInnovating Illumination

TM

11 12/04/2018 V4.0


Average 1pc Power DomiLED 1 completed bag (2000pcs)

0.034 190 ± 10Weight (gram)

CardboardBox

Dimensions (mm) Empty BoxWeight (kg)

Super Small

Small

Medium

Large

For Power DomiLEDReel / BoxCardboard Box

Size

Weight (gram) 0.034 240 ± 10

DOMINANT TM

Moisture sensitivity level

Moisture absorbent material +Moisture indicator

The reel, moisture absorbent material and moisture indicator aresealed inside the moisture proof foil bag

Reel

Barcode label

Label

(L) Lot No : lotno

(P) Part No : partno

(C) Cust No : partno

(G) Grouping : group

(Q) Quantity : quantity

(D) D/C : date code

(S) S/N : serial no

DOMINANT Opto TechnologiesML TEMP2 260˚CRoHS Compliant

Made in Malaysia

325 x 225 x 190

325 x 225 x 280

570 x 440 x 230

570 x 440 x 460

0.38

0.54

1.46

1.92

9 reels MAX

15 reels MAX

60 reels MAX

120 reels MAX


TM

12

Time (sec)0 50 100 150 200

300

250

225

200

175

150

125

100

75

50

25

275

Tem

pera

ture

(˚C

)Classification Reflow Profile (JEDEC J-STD-020C)

Ramp-up3˚C/sec max.

255-260˚C10-30s

60-150s

Ramp-down

6˚C/secmax.

Preheat 60-180s

480s max

217˚C

Recommended Pb-free Soldering Profile

12/04/2018 V4.0


TM

13 12/04/2018 V4.0


TM

Appendix

1) Brightness:

1.1 Luminous intensity is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded

uncertainty of ± 11 % (according to GUM with a coverage factor of k=3).

1.2 Luminous flux is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded


1.3 Radiant intensity is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded


1.4 Radiant flux is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded uncertainty

of ± 11 % (according to GUM with a coverage factor of k=3).

2) Color:

2.1 Chromaticity coordinate groups are measured at current pulse 25 ms(typ) with an internal reproducibility of ± 0.005 and

an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3).

2.2 Dominant wavelength is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 0.5nm and an

expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3).

3) Voltage:

3.1 Forward Voltage, Vf is measured when a current pulse of 8 ms(typ) with an internal reproducibility of ± 0.05V and an

expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3).

4) Typical Values:

4.1 At special conditions of LED manufacturing processes, typical data or calculated correlations of technical parameters

only reflect the statistical figures. But not necessarily correspond to the actual parameters of each single product, which

could differ from the typical data or calculated correlations or the typical characteristic line. These typical data may

change whenever technical improvements happen.

5) Tolerance of Measure

5.1 Unless otherwise noted in drawing, tolerances are specified with ± 0.1 and dimension are specifiec in mm.

6) Reverse Voltage:

6.1 Not designed for reverse operation. Continuous reverse voltage can cause migration and LED damage.

Revision History

NOTE

All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT

Opto Technologies does not assume any liability arising out of the application or use of any product described herein.

DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function

or design.

DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems

without the express written approval from the Managing Director of DOMINANT Opto Technologies.

Page

-

2, 3

2, 5

2, 3, 13

Date of Modification

31 Oct 2016

22 Aug 2017

21 Dec 2017

13 Apr 2018

14 12/04/2018 V4.0


TM

Subjects

Initial Release

Add New Partno: DWA-MKG-KL3-1Update Wavelength Grouping for Super Red

Update Thermal ResistanceUpdate Thermal Resistance Graph

Not For New Design: DWA-MKG-KL3-1 & DWA-MKG-K3M-1Add New Part No: DWA-MKG-K3L-2 & DWA-MKG-KL2-4

Update Wavelength GroupingUpdate Appendix

About Us

DOMINANT Opto Technologies is a dynamic company that is amongst the world’s leading automotive LED manu-facturers. With an extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More in-formation about DOMINANT Opto Technologies, a ISO/TS 16949 and ISO 14001 certified company, can be found under http://www.dominant-semi.com.

Please contact us for more information:

DOMINANT Opto Technologies Sdn. BhdLot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia.Tel: +606 283 3566 Fax: +606 283 0566E-mail: [email protected]


TM

Documents

DOMINANT TM Opto Technologies Power DomiLED...DWA-MKG-K3L-2 DWY-MKG-JL3-1 DWA-MKG-KL3-1 DWA-MKG-K3M-1 Part Ordering Number Color Viewing Angle˚ Luminous Flux @ IF = 50mA (lm) Appx