Upload
others
View
22
Download
3
Embed Size (px)
Citation preview
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
DNC Tranfer Device
User Manual V2
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
2
I. INSTRUCTIONS FOR CHECKING VESION AND UPDATING
FIRMWARE
Hiep Phat Mechatronics currently provide 2 model of DNC Transfer Device:
1. DNC Basic.
2. DNC Transfer by using Wi-fi
- Follow the Micro DNC. V2 , we will provide our software called “ HP
Explorer ” to control and transfer data via Wi-fi network to the CNC
Machine.
- Main firmware and Module Wi-fi firmware.
- Before reading manuals, you need to check which version of your device
you are using, by:
Press and hold Menu button, then press Power button. The text in red frame above is current version of device: V8.1.7
Firmware update steps:
1. Press and hold” ESC ” button on the device, then press Power button,
wait for a few second the screen will appear interface like image
below, require us to plug the USB has been copied firmware file into.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
3
2. After pluged USB into device.
3. Move arrow key to choose firmware.Example “ DNC2BinFileV871A”,
press “ ENT “ button to confirm then press “ ENT “ button again to
start updating.
4. The screen will appear as follows, wait for run 100% completely.
Device will restart automatically, this time the device has been
updated to the latest firmware.
Repeat the steps above with the ESP8266 BinFile V1.3.bin.(just for
wi-fi model).
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
4
II. INTRODUCE FUNTIONS
1. MAIN SCREEN
( Main menu)
- Form main menu screen, use key to select function
which you want to use.
2. MANUAL FUNTIONS
2.1 SIMULATION
- User use this function to check machining program and inconsequential
toolpaths.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
5
2.2 EXPLORE
- User use this function to manage files and hard disk inside and outside
device.
- User is also can :
Format, check properties, access into different hard disk. With files and
folder, user is able to: Read, Copy, Cut, Paste, Delete, Rename, check
information, make new folder.
2.3 DNC Transfer
- User use this function to transmit program files to CNC machine in mode
DNC (mode tape on CNC machine).
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
6
2.4 READ FROM DNC
- User use this function to take out program or parameter from CNC machine
and save to device.
2.5 CONFIGUATION
- User use this function to adjust the parameter of the device and the
appropriate output port to communicate with CNC machines.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
7
2.6 HELP/INFOR
- User use this function to get information about device and manufactuer.
2.7 EDIT
- User use this function to edit G-code program directly on deivce
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
8
III. MANUAL INTRUCTION
3.1 EXPLORER
- Step 1: From main screen press key to choose function
“Explore” application.
- Step 2: Press to open application.
- Explore’s screen show 2 hard disk:
1. C:/System Disk : Sdcard inside device (4Gbyte)
2. D:/USB Disk : Usb storage (USB).
Use the key to choose f i le .
C:/ Sdcard inside device
(4GB)
D:/ USB
storage (USB
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
9
Use the key to open option:
1. : Change hardisk.
2. : Move File to “Tranfer DNC” application.
3. : Change to “Read From CNC” application.
4. : Edit và cut File Gcode.
5. : See machining toolpath simulation.
6. : Copy file from hardisk to another hardisk.
7. : Cut file from hardisk to another hardisk.
8. : Paste object which you copy or cut before.
9. : Create a new folder.
10. : Create a new fille Gcode.
11. : Change the file name or the folder name.
12. : Delete file or folder select.
13. : Check the imformation of the select object
14. : Format hardisk.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
10
3.2 DNC TRANFER
Step 1: From the main menu screen use the buttons to select
“DNC Tranfer” application.
Step 2 : Use the key to open application.
Step 3: Use the key to select file Gcode.
Step 4: Then press to transfer data. Now the status box on the device
will display “Waiting” .
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
11
Parameter:
1. Name of file which selected to transmit to DNC machine (if there’s no file
choosen screen will show“No File Select”)
2. “RS232: 9600,7,2,N” : Thể parameters which was config for port RS232.
3. “0%”: Percentage transmited.
4. "STOP": Status stop transmitting if the text"STOP", waiting for the signal
from the CNC machine if the text is "WATTING ...", transmitting data to the
CNC machine if the text is "SENDING .
Lưu ý: In some cases, if you manipulate on CNC machine first and then
press on DNC device, it may not transmit data because the device
does not receive signals from CNC machine (XON), in this case, press
to emulate XON signal and activate automatic transmission process.
To (STOP), User Press . Device will automatic reload file from the
beginning.
3.3 READ FROM CNC
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
12
Step 1: From the main menu screen use the buttons to select
“Read From DNC” application.
Step 2 : Use the key to open application.
Step 3: Manipulate the CNC to Output (Punch) program.
Step 4: After the transfer file is complete. Press and enter the file
name.
Note:
In the “Read mode” section of the “Configuration”.
:
+ User : The device user will name the file just taken from the CNC machine.
+ Auto : The file name will match the file name in the previous CNC machine.
The file will be automatic saved the the hardisk C:/
3.4 CONFIGURATION
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
13
Step 1: From the main menu screen use the buttons to select
“Configuration” application.
Step 2 : Use the key to open application.
- Use the keys to manipulation, use the key to choose.
- Use the keys to change value.
- Use the key to tab.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
14
Parameter:
1. : Select function display power on (Main Menu, DNC,
Explorer)
2. : Output option, depending on the model,
will have different option, for example RS23, User Tape, Fanuc 6m(parallel
port)…
3. : File / Folder sorting mode in ABC or
Datetime format .
4. : Automatically run the program from the beginning
when
processing is complete.
5. : adjust the contrast of the screen.
6. : Usually going to 0ms.
7. : Select Baud rate.
8. : Select the number of bits of data (7.8).
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
15
9. : Select
Bit Sop (1.2).
10. : Select
check bit (None, Even, Odd).
11. , , ,
: These parameters are used to fine tune the
parallel port, to follow the manufacturer's default .
12. Delay time of parallel port, used to adjust
the parallel port of the CNC machines.
13. : The feature is used to detect the end of the
file of function Read From. There are 2 modes are Time Out and% Gcode%,
in mode% Gcode%, the device will proceed to retrieve data until the appear
symbol %, indicates the program has finished, it will automatically stop and
complete receive data from the machine.
14. : After the first period, if the device does
not read any more data , it will understand that it has completed reading file
from CNC machines, for example, if the setting is 10s, after 10s waiting if
there are no data is read any further, the device will finish receiving data
from CNC machine.
15. : Choose how to enter File name when
using Read From DNC. There are two modes, Auto and User. Auto mode
will default to the File name of the first 15 characters of the data. User mode
will let the user enter the file name.
16. : Color of background on the simulation.
17. : Color when tool rapid move.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
16
18. : Color when tool impact material.
19. : to add effect when change window.
20. : The wifi name the user want to connect to.
21. : Password of wifi connection.
3.5 HELP/INFO
Step 1: From the main menu screen use the buttons to select
“About” application.
Step 2 : Use the key to open application.
- The screen will display information about device , version and Instructions
The text in red frame
above is current
version of device:
8.2.4A
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
17
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
18
3.6 EDIT
Step 1: From the main menu screen use the buttons to select
“Edit” application.
Step 2 : Use the key to open application.
: Create a new File Gcode.
: Open and edit file is available in DNC memory or on
USB
:
+ : Remove the number of command lines you want
according to the program percentage.
+ : Remove the number of command lines you want
according to the N command.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
19
3.7 SIMULATION
Step 1: From the main menu screen use the buttons to select
“Simulation” application.
Step 2 : Use the key to open application.
Step 3: Press to open explorer.
Step 4: Press to choose file. After device handles and scale images
complete you can use the key to see the toolpath.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
20
IV. HP EXPLORER V.2-Controller Software to transmit files from
Micro DNC to CNC machine by using Wi-fi
HP EXPLORER Display
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
21
1. Install Hiep Phat Explorer Software to control device by using Wi-fi
Note: Before you installed this software you have to shut down Fire wall.
-Run file “ HPexplorer 2.exe “
- Click next to start install software
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
22
-Choose “ Add or Remove Features “
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
23
-Click choose hard disk to install software and “ Next “
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
24
- Click Install to start install software
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
25
-Click Finish to complete install software
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
26
-After installed software , logo will appear on main screen
-Double Click to open Software
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
27
2. PC connect with Micro DNC device by using Wi-fi.
4.1 Introduce
HP explorer Display
ADD NEW DEVICE GET DEVICE STATUS
DEVICE LIST
COMPUTER
HARD DISK
FOLDER/G-CODE
FILES FORM
COMPUTER
MICRO DNC HARD DISK
FILE/FOLDER IN MICRO DNC
DEVICE STATUS
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
28
3. Connect Micro DNC Device with PC
Step 1: Click “Add new device”
Step 2: Type Name and IP address of DNC device.Then Click “ Add
New “
Note: The IP address of Micro DNC device must same as IP address you entered in HPexplorer
CLICK TO ADD NEW
DEVICE
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
29
Step 3: Choose device that you want to connect
-Check Device Status.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
30
4. Transfer file by using Wi-fi
Note: your PC/Laptop and DNC device there are must use the same
Wi-Fi network. Before transmitted File and Folder.
Hiep Phat Mechatronics Co., Ltd.
Address: 64, 20 Street - Bình Hưng Hòa A Ward - Bình Tân District – HCM city
Phone : 0918 374 006 - 0905 438 533 - 0979 897 183
Email: [email protected] Web: www.hiepphatcnc.com
31
Cables for connecting Mirco DNC and CNC machine