AGENDA I Consent 4 - Granicus

G/PW/Admin/Transit/TRAN1935.SR.RW

CITY OF SIMI VALLEY MEMORANDUM

October 28, 2019

TO: City Council

FROM: Department of Public Works

SUBJECT: APPROVAL TO PURCHASE THREE REPLACEMENT FIXED-ROUTE CNG BUSES UTILIZING THE CALACT-MORONGO BASIN TRANSIT AUTHORITY (MBTA) PURCHASING COOPERATIVE

STAFF RECOMMENDATION

It is recommended that the City Council approve the purchase of three replacement Compressed Natural Gas (CNG) fixed-route buses utilizing the CALACT-MBTA Purchasing Cooperative.

BACKGROUND AND OVERVIEW

In FY 2014-15, Simi Valley Transit secured $1,550,000 in grant funding for the replacement of three fixed-route CNG buses from the State Proposition 1B Public Transportation Modernization, Improvement, and Service Enhancement Account (PTMISEA) fund. The associated capital outlay was budgeted in the City’s Transit budget: $1,250,000 in FY 2016-17 and $300,000 in FY 2017/18. As a member of the California Association for Coordinated Transportation (CALACT), the City is able to procure new buses through the CALACT-Morongo Basin Transit Authority (MBTA) Purchasing Cooperative (Cooperative). The Cooperative provides a Federal and California State-compliant purchasing solution that allows the City to select the vehicles that best meet its transit needs. The City’s Purchasing Ordinance Section 2-9.201 (e) authorizes using the cooperative purchasing method recognizing the efficiency in staff time and the very competitive pricing usually available. The CALACT-MBTA Request for Proposals (RFP) and the New Flyer Best and Final Offer (BAFO) are available for review by the public in their entirety at the City Clerk’s Office. The table below details the funding information including the fiscal year that the funding was secured.

Bus Type Quantity Replacement Cost FY 2014-15

Prop 1B/PTMISEA Grant Total CIP Budget

35-Foot 3 $1,535,006 $1,550,000 $1,550,000

AGENDA I

TEM NO. Consent (4)

2


In 2014, the City purchased three 35-foot New Flyer buses for a base price of $519,708 per bus. The base price for each similarly-equipped 35-foot New Flyer CNG bus under the Cooperative is $511,669, which includes California State Sales Tax, but still provides a discount of approximately $8,039 per bus. In addition, New Flyer provides a five-year/300,000 mile warranty for axles, and 12-year/500,000 mile warranty on the chassis structure. The total cost to purchase the three CNG buses under the Cooperative is $1,535,006. The City has a grant for $1,550,000 in FY 2014-15 Proposition 1B PTMISEA funds that is sufficient to cover the cost of the three replacement CNG buses. The purchase is 100% funded by non-General Fund revenues. FINDINGS AND ALTERNATIVES In accordance with Federal Transportation Administration (FTA) regulations, the three CNG buses will replace existing Simi Valley Transit CNG buses which have reached the end of their useful service life of 12 years and/or 500,000 miles. Once a bus exceeds its useful service life, it needs to be replaced prior to its CNG tank expiration date. The replacement CNG fixed-route buses to be purchased utilizing the CALACT-MBTA Purchasing Cooperative will replace three busses in the Transit fleet. Transit’s fixed-route fleet of 11 buses includes two 2004 North American Bus Industry (NABI) 40-foot buses (vehicles #4524 and #4525) which reached their minimum useful life in 2016 and were removed from service in 2019 due to engine failure/pending CNG tank expiration dates. Two of the proposed buses will replace these NABI units and will be delivered in the Second Quarter of 2020. The delivery of the third bus will occur in the First Quarter of 2021 and will replace one of three 2010 New Flyer 40-foot buses which will reach their minimum useful life in 2022 (#4526, #4527 or #4528, depending on engine condition/mileage). Simi Valley Transit introduced 35-foot buses into its fixed-route fleet with the purchase of three 35-foot buses in 2014. To continue operational and maintenance efficiencies, staff recommends replacing the retiring 40-foot buses with 35-foot buses. Simi Valley Transit has received an Assignment to Purchase from CALACT (Attachment A, page 4). The following alternatives are available to the City Council: 1. Approve the purchase of three replacement CNG fixed-route buses utilizing the

CALACT-MBTA Purchasing Cooperative; 2. Provide other direction to staff. Staff recommends Alternative No. 1.

3


SUGGESTED CITY COUNCIL MOTION I move to approve the purchase of three replacement CNG fixed-route buses utilizing the CALACT-MBTA Purchasing Cooperative. SUMMARY Simi Valley Transit has combined FY 2016-17 and FY 2017-18 budget authority of $1,550,000 funded by Proposition 1B PTMISEA funds for the purchase of three replacement CNG fixed-route buses. The City has received an Assignment to Purchase Agreement for three 35-foot CNG buses under the CALACT-MBTA Purchasing Cooperative. The total replacement cost for three CNG buses is $1,535,006, and the purchase is 100% funded by non-General Fund revenues. It is recommended that the City Council approve the purchase of three replacement CNG fixed-route buses utilizing the CALACT-MBTA Purchasing Cooperative. ____________________________________ Ronald K. Fuchiwaki

Public Works Director Prepared by: Robin Walker, Senior Management Analyst INDEX Page Attachment A – Assignment to Purchase Agreement ...................... 4 Attachment B – Updated Quote Dated 10/9/2019 (with Sales Tax) . 6 Attachment C – New Flyer Quote Dated 9/12/2019 ......................... 8 Attachment D – MBTA Contract #18-01 MCI ................................. 43

hCT3iilff n,:#',",'^",HJg*ff r"-

Assignment to Purchase AgreementAssignment # I 8-01 -0398

The CALACT-MBTA Purchasing Cooperative, "Assignor", hereby assigns to Simi Valley,City of; "Assignee", 3 options to purchase Transit Vehicles ("Vehicles") from the JointProcurement Cooperative at a price and under the terms and conditions contained inAssignor's Contract No l8-01 with the Contractors awarded to on the Procurement. Onlythose vehicles and optional features may be purchased using the Solicitation and the purchasemay only be from a Seller listed on the Schedule. Specifically, the Assignment shall have theright to purchase:

Quantity and Type of Vehicle(s):

(3) New Flyer Class H

Total # of Vehicles: 3

Such ability to purchase commenced, per terms of Contract, on 101712019, and may beexercised at any time on or before 312812021. Pricing for this assignment is valid for PurchaseOrders until3/281202l,the expiration date ofthe base period ofthe contract. Assignee mustcommunicate any changes in the order in parlicular cancellation to the Cooperative as soon aspossible.

With respect to the Vehicles assigned hereunder and this Assignment, Assignee agrees toperform all covenants, conditions and obligations required of Assignor under said Contractand agrees to defend, indemnify and hold Assignor harmless from any liability or obligationunder said Contract. Assignee further agrees to hold Assignor harmless from any deficiencyoi defect in the legality or enforcement of the terms of said Contract or option to purchasethereunder. Assignee agrees and understands that Assignor is not acting as a broker or agentin this transaction and is not representing Seller or Assignee, but rather is acting as a principalin assigning its interest in the above-referenced assignment to purchase the Vehicles under theContract to Assignee.

Please be advised that assignment of said vehicles does not constitute a recommendation orendorsement of this product by the Cooperative. The Assignee is responsible for its choice ofvehicle product and options selected. Assignee is responsible for vehicle inspection,acceptance and enforcement of any contract provisions. Assignee agrees that any inspectionsnecessary for delivery and acceptance of the vehicles are to be accomplished by their ownqualified staff, firms on the CALACT Vehicle Inspectors list or other independent inspectorpre-approved in writing and in advance by the CALACT Cooperative. While PreAwardverifications of Buy America, FMVSS and Purchaser's Requirements have beenaccomplished, Assignee is responsible for Post Award due diligence in this regard.

4 ATTACHMENT A

Purchasing agencies are responsible for and are to exercise due diligence in evaluating thesuitability of these vehicles for their operating environment and are responsible fordetermining their eligibility for funding. In particular, the Cooperative urges you to review theAltoona test repoft for the vehicle you are purchasing.

Supporting documents for your records will be sent to your attention. Please retain these forany reviews or audits your agency will be subject to. Additional copies may be downloadedfrom our secure website, please contact CALACT staff for access to this.

Assignee hereby unconditionally releases and covenants not to sue Assignor upon any claims,liabilities, damages, obligations or judgments whatsoever, in law or in equity, whether knownor unknown, or claimed, which they or either of them have or claim to have or which they oreither of them may have or claim to have in the future against Assignor, with respect to theVehicles or any rights whatsoever assigned hereunder.

.,"-\ - /]'lJAr r(,

Daniel MundyDeputy Executive DirectorCALACT"Assignor"

5

,

NEW FLYER OF AMERICA

October 9, 2019

Ben Gonzales Transit Operations Manager City of Simi Valley 2929 Tapo Canyon Road, Simi Valley, CA 93063

Subject: Updated Quotation for Heavy Duty Low-Floor CNG Transit Buses with 7.25% Sales Tax

Dear Mr. Gonzales;

As requested, New Flyer is pleased to submit a revision to our September 12, 2019 proposal to reflect the 7.25% California Sales Tax for Simi Valley's order for three (3) 35' Compressed Natural Gas (CNG) buses based on the contract with Morongo Basin Transit Authority (MBTA) Contract #18-01 .

Description Each

Original Contract Price Base Coach 18-01-BAFO Price $ 454,602.00

Base Bus Price Changes Total $ 24,134.90

Revised Price Base Bus Price (including ADA & delivery) $ 478,736.90

Procurement Fee@ 1% (non-taxable) $ (4,787.37)

ADA Equipment Cost (non-taxable) $ (19,719.47)

Total non-taxable items $ (24,506.84)

Total Contract Base Bus Price (subject to 7.25% Sales Tax) $ 454,230.06

7.25% California Sales Tax $ 32,931 .68

Revised Price Base Bus Price (including ADA & delivery) $ 478,736.90

7.25% California Sales Tax $ 32,931 .68

Revised Total Contract Price with California Sales Tax $ 511,668.58

Revised Total Contract Price with California Sales Tax for three $ 1,535,005.75 (3) XN35 CNG Buses

New Flyer would like to note the following:

• California Sales Tax Rate of 7.25% is based on the bus physical operating/ garage address located a 490 West Los Angeles Ave, Simi Valley, CA 93065.

• Per MBTA-RFP Specs-1801 Addendum-1, Section SP 4- Procurement Fee is not subject to California Sales Tax.

• Per MBTA-RFP Specs-1801 Addendum-1, Section SP 6.7 -ADA eligible equipment is not subject to

6 ATTACHMENT B

• Per MBTA-RFP Specs-1801 Addendum-1, Section SP 6.7 -ADA eligible equipment is not subject to California Sales Tax.

• The ADA Equipment cost of $19,719.47/bus is based on New Flyer's RFP response to MBTAs RFP#18 01, Package 2, Section 2E

• Delivery is FOB Simi Valley

This is a very important project to us as it allows us the opportunity to build a strong relationship with Simi Valley. It also affords us the opportunity to deliver to you, once again, some of the most advanced vehicles available in North America. We thank you for your continued interest in New Flyer products and look forward to working with you in the near future.

Since~,

.e-d-(0 STEFAN BOOKS Business Segment Director

P 204.224.6491 C 204.232.6804 stefan [email protected]

CC: Dan Trujillo - Regional Sales Manager Jerome Canseco -Technical Sales Analyst

2

7

Simi Valley Transit

Quotation for (3) XN35 Heavy Duty CNG Transit

Buses

ATTACHMENT C8

,-

NEW FLYER OF AMERICA

September 12, 2019

Ben Gonzales City of Simi Valley

Subject: Quotation for Heavy Duty Low-Floor Compressed Natural Gas Transit Buses

Dear Mr. Gonzales,

New Flyer is pleased to submit an option price quotation for the production of three (3) 35' Compressed Natural Gas buses based on New Flyer's contract with Morongo Basin Transit Authority, Contract #18-01.

The proposed buses will be technically configured similar to SR-1838 including changes listed under Section 2 of our proposal submission. Note the changes in Section 2 are price changes to adjust the MBTA Contract #18- 01 base bus configuration to a similar configuration built for SR-1838.

The price for three (3) buses is $478,736.90 per bus

We want to take this opportunity to highlight key elements of our proposal:

Warranty: New Flyer exceeds industry standard warranties in many areas such as 5 year I 300.000 miles warranty for axle (Standard warranty is 2 years) and our multiplex warranty is 3 years/150,000 miles (Standard competitor warranty is 1 year/50,000 miles). Please refer to Section 3 of our proposal for information regarding our warranty proposal.

Training: New Flyer Training is an organization within the New Flyer Customer Services group - a division of New Flyer Industries. As a part of the leading manufacturer of heavy-duty transit buses in the United States and Canada, we have access to top design, engineering, propulsion technology and electrical systems professionals. This enables us to offer the service and expertise to maximize the lifetime value of your fleet. Please refer to Section 5 of our proposal for our training proposal details.

Publications: Our New Flyer Publications professionals combine extensive, hands-on technical experience with exceptional writing, illustrating and publishing skills to create the industry's benchmark in maintenance manuals. Supplying accurate information in a timely manner assists the customer in the performance of proper bus maintenance, which in turn, adds to the overall reliability and lifetime value of each New Flyer bus on the road. Please refer to Section 4 of our proposal for details.

Tooling and Diagnostics: There are no tooling or diagnostics items included in the base bus price. Optional pricing is available within the MBTA Contract #18-01

Spare Parts: There are no spare parts included in the base bus price.

9

Delivery Proposal: New Flyer is proposing a delivery for the first two buses by Q02 of 2020 and the third bus delivered by Q01 of 2021 based on receipt of a valid purchase order within 30 days of this submission.

Payment Terms: Following the terms and conditions of New Flyer's contract with Morongo Basin Transit Authority, Contract #18-01, our proposed payment terms are as follows:

■

■

Payment terms are Net 30 days from delivery and acceptance Acceptance is within 15 days of delivery

The quotation is open for acceptance for thirty (30) days. Please indicate your acceptance by providing a valid purchase order to to New Flyer, attention Ryan Childe, Technical Sales Manager, via [email protected]

RYAN CHILDE Technical Sales Manager

P 204.224.6482 C 204.232.5176 ryan [email protected]

CC: Dan Trujillo - Regional Sales Manager Stefan Books - Business Segment Director.

2

10

City of Simi Valley Quotation for (2) XN35 Heavy Duty CNG Transit Buses

Section Title

1 Price Change Summary

2 Price Change Detail

3 Warranty

4 Publications

5 Training

6 Technical Summary

6A Seating Layout

11


Section #1 - Price Change Summary

New Flyer Response:

Please refer to the attached summary of New Flyer of America’s proposed bus price based on our contract with MBTA #18-01.

12

Price Change Summary

Property: Simi Valley Option Origin: MBTA Contract 18-01

Sales Release No.: TBDQuantity: 3

Type: XN35Price Change No.: 1

Revision: ADate: 12-Sep-19

Each Total

Original Contract Price Base Coach 454,602.00$ 1,363,806.00$ Base Bus Price Change Total 24,134.90$ 72,404.71$ Revised Price Base Bus (including ADA & delivery) 478,736.90$ 1,436,210.71$

9/12/2019

13


Section #2 - Price Change Details

New Flyer Response:

Please refer to the attached price change details related to New Flyer of America’s proposed bus price based on our contract with MBTA #18-01.

14

Price Change Detail

Property: Simi Valley

Option Origin: MBTA Contract 18-01

Sales Release No.: TBD

Quantity: 3

Bus Type: XN35

Price Per CoachPrice Change Type Reference No. Option No. Option Group Description Total Total Contract

Base Bus Price Change 1 205 Tires Change to aluminum wheels - Contract Item #59 3,826.54$ 11,479.63 2 219 Engine Add Engine and transmission oil drain plugs 39.74$ 119.22 3 219 Engine Add Oil sampling 14.92$ 44.754 219 Engine Add water filter 92.46$ 277.37 5 246 Air, Brake & Lev System Change to Bendix AD-IP air dryer - Contract item #115 (28.12)$ (84.37)6 260 Battery Compartment Add Anderson jump starter - Contract item #121 121.40$ 364.21 7 273 Exterior Lamp Change to 7" red/amber tail lights 153.90$ 461.70 8 273 Exterior Lamp Add second center stop light strip 52.93$ 158.79 9 277 Interior Lighting Change to blue interior light covers - first two banks of lights on each side, the rest are white (included at no cost) -$ -10 277 Interior Lighting Add SDS service light 56.42$ 169.26 11 280 Passenger Signal Add Push button signal at seat stanchions 19.40$ 58.2112 284 Elect - Side/Console Add Side console lighting 101.51$ 304.52 13 284 Elect - Side/Console Add Silent alarm - Contract item #123 499.66$ 1,498.99 14 284 Elect - Side/Console Add Sweeper light switch 9.69$ 29.0815 350 Drivers Control Change to Teleflex adjustable pedals - Contract item #126 950.02$ 2,850.07 16 350 Drivers Control Change Steering wheel to a 3 spoke, 22" diameter hard plastic. 93.86$ 281.57 17 420 Body A/P Before Paint Change to screened engine door 312.48$ 937.44 18 422 Body A/P After Paint Change Interior sidewall melamine colour - Beige Gloss. (189.54)$ (568.63) 19 422 Body A/P After Paint Add Watch your step sign 178.14$ 534.43 20 423 Advertising Frames Add Ad frames to the SDS box - 14" x 20" rear facing. 184.14$ 552.43 21 470 Destination Signs Add heating to front destination glass 108.78$ 326.34 22 470 Destination Signs Add rear route sign (Hanover) - Contract item #72 1,067.53$ 3,202.58 23 Left Blank Intentionally -$ -24 480 Mirrors Change to customer specific exterior mirrors (includes single remote controlled and turn signal LEDs) 112.00$ 336.00 25 480 Mirrors Add Overhead entrance (stepwell) mirror 53.71$ 161.12 26 491 Door Exit Change to customer specific exit door - includes solid state proximity switch and Vapor CLASS system and door glass size - 2/3 top, 1/3 bottom 2,662.13$ 7,986.38 27 526 Seating & Stanchions Change to customer specific passenger seating layout - 32 passengers, USSC Aries (14,450.00)$ (43,350.00) 28 526 Seating & Stanchions Change to customer specific Recaro driver's seat (100.09)$ (300.27) 29 526 Seating & Stanchions Add six handhold straps 108.45$ 325.36 30 580 Wheelchair Lift Add wheelchair ramp counter 56.82$ 170.47 31 600 Customer Options Add Front electric towing receptacle - Cole Hersee. 32.66$ 97.9732 600 Customer Options Add Ground straps - two straps 11.72$ 35.1633 600 Customer Options Add interior fan 244.19$ 732.58 34 600 Customer Options Add three SDS trays 357.15$ 1,071.45 35 600 Customer Options Add Curbside front equipment box 68.74$ 206.21 36 600 Customer Options Add Driver's storage box behind seat 64.43$ 193.28 37 600 Customer Options Add Registration holder 11.54$ 34.6338 600 Customer Options Add radio system provisions 145.47$ 436.40 39 600 Customer Options Add Apollo camera system 18,781.76$ 56,345.27 40 600 Customer Options Change to Kidde fire suppression system with methane detection 1,588.68$ 4,766.04 41 600 Customer Options Add Sportsworks Trilogy bike rack - Contract Item #3 2,998.26$ 8,994.78 42 Delivery Deliverable Add delivery price "Delivery Zone 2" - Contract Item #67 3,721.44$ 11,164.32

Base Bus Price Change Total 24,134.90$ 72,404.71 Grand Total 24,134.90$ 72,404.71

15


Section #3 - Warranty

New Flyer Response:

Please refer to the attached information which details the warranty terms and conditions based on our contract with MBTA #18-01.

16

Base Bus Warranty New Flyer of America 1 50,000 Excluding scheduled maintenance items, acts of nature, or normal consumables

Basic Bus Structure New Flyer of America 3 150,000Body, and body structure shall consist of the components that are bolted or riveted to the structure, such as, exterior panels, interior panels,

roof, ceiling, and driver’s barrier.

Chassis Structure (Integrity) New Flyer of America 12 500,000Consists of all components that are welded together to form the main frame (skeleton) and body construction. The structural integrity

guarantee covers against a significant loss of structural integrity of the assembly or its functional performance due to non corrosion related failures.

Chassis Structure (Corrosion) New Flyer of America 12 500,000

Consists of all components that are welded together to form the main frame (skeleton) and body construction. The corrosion guarantee covers against a significant loss of structural integrity of the assembly or its functional performance, resulting from a pertinent loss of cross-section due

to corrosion caused by normal environmental elements but excludes corrosion caused by aggressive road de-icers such as Magnesium Chloride or equivalents, unless New Flyer approved preventative measures are taken.

Engine Cummins 2 UnlimitedAll repairs/warranty claims need to be handled through the local authorized repair facility. When the 3 year extended warranty is purchased (5

years total) the following applies: Two Year Base (Full Coverage), years 3,4 & 5 covers components only as per manufacturer's warranty document.

Transmission Allison 2 UnlimitedAll repairs/warranty claims need to be handled through the local authorized repair facility. When the 3 year extended warranty is purchased (5

years total) the following applies: Two Year Base (Full Coverage), years 3,4 & 5 covers components only as per manufacturer's warranty document.

Axle (Front and Rear) MAN 5 300,000Excluding maintenance items & items that are not covered by the OEM's warranty. All friction materials are excluded from this limited warranty.

Wear and third party items supplied with the axle (e.g. slack adjuster, seals and bearings, shocks, air bellows, radius rods, brake chambers) are not included in the 5 year warranty. Please see manufacturer's warranty document.

A/C Thermo King 2 UnlimitedSome limitations and exclusions may apply - Please see manufacturer's warranty document. All repairs/warranty claims need to be handled

through the local authorized repair facility.

Brake System New Flyer of America 2 100,000 Friction Material Excluded

Destination Signs Hanover 10 UnlimitedSome limitations and exclusions may apply - Please see manufacturer's warranty document. All repairs/warranty claims need to be handled


Door Systems Vapor 3 150,000 Excluding maintenance items & items that are not covered by the OEM's warranty

Air Compressor Cummins 2 Unlimited

Wheelchair Ramp New Flyer of America 2 100,000

Electrical System Vansco 3 150,000 Excluding maintenance items & items that are not covered by the OEM's warranty

LED Headlights J.W.Speaker 6 Unlimited Warranty covers parts only

Paint Axalta 5 Unlimited

Air Dryer Bendix 2 200,000

Alternator EMP 2 100,000

MAJOR COMPONENT DESCRIPTION PROVIDER

BASE AND EXTENDED WARRANTY

YEARS MILEAGECOMMENTS

17

Charge Air Cooler EMP 3 150,000

Cooling System EMP 3 150,000 Some limitations and exclusions may apply - Please see manufacturer's warranty document.

Emission Control System Cummins 5 100,000Some limitations and exclusions may apply - Please see manufacturer's warranty document. All repairs/warranty claims need to be handled


Hydraulic System New Flyer of America 2 100,000

Starter New Flyer of America 2 100,000 Warranty covers parts only

Towing New Flyer of America 5 300,000

Handling (15%) New Flyer of America 5 300,000

Road Call New Flyer of America 5 300,000

Fire Suppression System Kidde 2 Unlimited

Radiator Fan Drive EMP 3 150,000

Power Steering Ixtec 2 200,000

Surge Tank New Flyer of America 2 100,000

Passenger Seating USSC 5 Unlimited

Fuel Storage & Delivery System New Flyer of America 2 100,000

Tires New Flyer of America 2 24,000

New Flyer Industries Limited warrants the tires installed as original equipment on this vehicle only against defects in materials and workmanship which cause the vehicle to fail to comply with applicable U.S. and Canadian greenhouse gas emission limits (“Warrantable

Emissions Failures”). This vehicle emissions limited express warranty relating to original equipment tires is valid for two (2) years or 24,000 miles whichever occurs first.

18


Section #4 - Publications

New Flyer Response:

Please refer to the attached information which details the publications proposal based on our contract with MBTA #18-01.

19

This is for one XN35 Build of 2 buses only

DESCRIPTION QTY CUSTOMER DELIVERYUPDATES

(years)COMMENTS

Emergency Responder Guides (8.5x11 laminated cards) 3 With First Bus Delivery N/AEmergency information to be on

board each bus.Final Operator's Guide (8.5x11 3-hole) 3 With First Bus Delivery 5

Final Parts Manual 1 Within 15 Business Days After Last Bus Delivery 5Final Service Manual 1 Within 15 Business Days After Last Bus Delivery 5

Final Bus System Drawings Manual (11x17 3-hole regular paper includes air, electr, hydraulic, cooling, PLC HVAC

layouts and schematics) 1 Within 15 Business Days After Last Bus Delivery 5

Final TIV DVD ROM 1 Within 15 Business Days After Last Bus Delivery 5CD Includes only NF Manuals plus

*This is for one XN35 Build of 2

buses only

DESCRIPTION QTY CUSTOMER DELIVERYUPDATES

(years)COMMENTS

With Draft Manual Delivery or Soon After Receiving From OEM Supplier

Custom Parts Manual 1 " N/ACustom Parts Manual PDF file 1 " N/A *

Fault Code Troubleshooting Manual (Vol 1 - 3) 1 " N/AService Manual (Vol 1 - 2) 1 " N/A

Operation & Maintenance Manual 1 " N/AOwners Manual 1 " N/A


Service Manual - Gen 4/5 1 " N/A *Parts Manual - Gen 4/5 1 " N/A *

Troubleshooting Manual - Gen 4/5 1 " N/A *Principals of Operation Manual - Gen 5 1 " N/A *

Quick-Tech Troubleshooting Guide - Gen 5 1 " N/A *Mechanics Tips - Gen 5 1 " N/A *

Operator's Manual - Gen 5 1 " N/A *With Draft Manual Delivery or Soon After Receiving

From OEM SupplierUnit Operation & Maintenance Manual 1 " N/A *

Intelligaire III Controls Diagnostic Manual 1 " N/A *With Draft Manual Delivery or Soon After Receiving

From OEM SupplierMH4 Cooling System Service Manual 1 " N/A *

MH4 Cooling System Troubleshooting Manual 1 " N/A *With Draft Manual Delivery or Soon After Receiving

From OEM SupplierABS Maintenance Manual 1 " N/A *


Operation & Maintenance Manual 1 " N/A *With Draft Manual Delivery or Soon After Receiving

From OEM SupplierSystem User Manual 1 " N/A *


Dual Spectrum System User Manual 1 " N/A *With Draft Manual Delivery or Soon After Receiving

From OEM SupplierHardware User Guides 1 " N/A *Software User Guides 1 " N/A *

OEM Supplier Publications

New Flyer Standard Bus Publications

Allison Transmission B300/400 Gen 5 OEM Manual Set (includes only the following)

Apollo Video System OEM Manual Set (includes only the following)

Thermo King HVAC OEM Manual Set (includes only the following)

EMP Cooling System OEM Manual Set (includes only the following)

WABCO ABS System OEM Manual (includes only the following)

Destination Sign OEM Manual Set (includes only the following)

KIDDE Gas Detection and Fire Suppression System OEM Manual Set (includes only the following)

Vansco Multiplexing System OEM Manual (includes only the following)

Cummins L9N (CM2380) 2018EPA Engine OEM Vendor Manual Set (includes only the following)

20


Section #5 - Training

New Flyer Response:

Please refer to the attached information which details the training proposal based on our contract with MBTA #18-01.

21

DESCRIPTION QTY HRS. SELLING PRICEOperator Orientation 4 Include in Bus Price

Maintenance Orientation 4 Include in Bus Price

New Flyer Supplied Training

22


Section #6 – Technical Summary

New Flyer Response:

Please refer to the attached technical summary which details the technical configuration of the proposed bus price.

23

Option# Description Value Description (blank means unset)

100-002XCELSIOR COACH

LENGTHXcelsior - 35' coach.

100-003 STRUCTURAL MATERIAL (B),Structural material - carbon steel/ferritic sst.

100-004FUEL/PROPULSION

SYSTEMPropulsion system - L9N CNG engine.

100-004bEPA CERT YEAR,FIRST

COACH OF SREPA CERT YEAR,FIRST COACH OF SR - 2019

100-004baEPA CERT YEAR,FINAL

COACH OF SREPA CERT YEAR, FINAL COACH OF SR - 2019

100-009POWERTRAIN CAN

BAUD RATE(S),Powertrain CAN Baud Rate - 500kbps.

201-005 BUMPERS (B),Bumpers - Romeo Rim, three piece, front and rear bumpers. Rear has anti-ride feature.

201-015 TOWING PROVISIONS (B),Front tow eyes - basic set-up, incorporated in front chassis. Tow adapters are required.

203-005 FRONT AXLE(B),Front axle - M.A.N. VOK-07-F, GAWR 15,873 lbs. With disc brakes. Hub mount, Knorr cylinders, Ferodo

lining.

203-005bSECUREMENT OF BRAKE LININGS

(S),Securement of brake linings - bonded.

203-011 SHOCK ABSORBERS (S),Shock absorbers - Koni.

203-050FRT AXLE AND WHEEL

SPLASH APRONS(B),Front axle and wheel splash aprons - basic, full width, fore of axles and wheels.

204-005 REAR AXLE(B),Rear axle - M.A.N. 4.56:1. Model HY-1350-F. GAWR 28,660. With disc brakes, hub mount, Knorr cylinder,

Ferodo lining.

204-005d REAR AXLE GEAR OIL (B),Rear axle gear oil - petroleum based.

204-070REAR AXLE DRAIN

PLUGS(B),Rear axle drain plug - magnetic external hex head.

204-140 REAR AXLE MUD FLAP(B),Rear axle mud flap - one aft of rear axle. (Requirement is determined by local climate, ice build-up, high

ambient temperature.)

204-144 REAR WHEEL MUD FLAP (B),Rear Wheel Mud flap - One aft of each rear wheel.

205-005 TIRES (B),Tires - 305/70R/22.5, NFIL supplied Michelin X InCity Z (65 mph).

205-010b WHEELS (A),Wheels - Alcoa 22.5" x 8.25" aluminum. Machined (brushed) Durabright finish.

209-005POWER STEERING

PUMP(B),Power steering pump - Ixetic (Luk) power steering pump powered off engine accessory drive.

209-005aPOWER STEERING

HOSES(S),Power steering hoses - NFIL (Manuli) Equator 2 and GH100 hose at steering box and NFIL (Manuli)

Equator 2 in engine compartment.


RESERVOIR(S),Power steering reservoir - required.

209-008dPOWER STEERING

DRAIN PLUG(B),Power steering drain plug - magnetic plug.

209-010 POWER STEERING UNIT (S),Steering box - Sheppard M110, power assisted, frame mounted.


SYSTEM FLUID(B),Power steering system fluid - Dexron III, mineral based.

219-001aENGINE,HP,TORQUE,TY

PE(S),Engine - Cummins L9N CNG, 280 horsepower with 900 LB FT torque. Uses a heat exchanger for the

isolated cabin heating loop. Engine Model year - 2018, 2019.

219-005aENGINE AIR

COMPRESSOR(B),Air compressor - Wabco HD 30.4, twin cylinder, turbo aspirated.

219-005b STARTER (ELECTRIC) (B),Electric starter - Delco 42MT, 24 volt heavy duty cranking motor, with PLC cut-out.

219-005fCUMMINS

DIPSTICK,LOCATION(S),Cummins dipstick, location - static oil level indicator, on curbside of engine.

219-005gENGINE & TRANS FLUID

FILL TAGS(S),Fluid fill ID tags - for engine and transmission dipsticks.

219-005h ROAD SPEED (B),Road speed - top road speed is governed. Set at 65 MPH (105 KPH).

219-010TRANSMISSION/HYBRID

DRIVE(B),Transmission - Allison B400R (with retarder).

S=Standard, B=Base, A=Available, C=Custom 9/11/2019 Page 1 of 16

24


219-010aTRANSMISSION

SHIFTING(S),Transmission shifting - foot on brake enables shift when in neutral.

219-010bALLISON

TRANSMISSION SPEEDS(B),Allison transmission speeds - primary mode: 6 speed Performance, secondary mode: 6 speed Economy.

219-010dALLISON NON-HYB TRANS RETARDER

(B),Allison non-hybrid transmission retarder - 1 stage from accelerator (25% retarder), 2 stages from brake pressure (66% and 100% retarder at 4 and 6 PSI).

219-010fALLISON TRANS FLUID

LEVEL DISPLAY(B),Allison transmission fluid level display - display provided.

219-010gALLISON TRANS AUTO-

SHIFT TO NEUTRAL(A),Allison auto-shift to neutral - immediately shifts to neutral when transmission left in gear and park brake

applied, and after 5 minute delay when brake interlock applied.

219-010hALLISON

TRANSMISSION PROGNOSTICS

(B),Allison transmission prognostics - the ECU program has Prognostics set to ON but DISABLED. The customer can ENABLE as desired. Prognostics: Oil Life Monitor, Filter Life Monitor, Transmission Health

Monitor. Must use Transynd fluid.

219-010mcALLISON FUEL SENSE

PACKAGE(B),Allison Fuel Sense Package - FuelSense 2.0 Plus with DynActive infinitely variable shift scheduling,

Dynamic Shift Sensing and improved Neutral at Stop functionality.

219-010md NAS DEACTIVATION (B),Neutral at stop deactivation - brake release.

219-010pa FLUID,ALLISON TRANS (B),Transmission fluid - Transynd synthetic.

219-011ENG/TRANS OIL DRAIN

PLUGS(A),Engine and transmission oil drain plugs - ETTCO/FEMCO for engine, basic for transmission.

219-025 AIR CLEANER (B),Air cleaner - Cummins. Reusable housing with disposable cartridge/filter.

219-025aAIR RESTRICTION

INDICATOR(B),Air restriction indicator - mounted directly on air intake tube.

219-035 EXHAUST SYSTEM (S),SST Exhaust system - using muffler and tubing.

219-035aEXHAUST TAIL PIPE

ORIENTATION(A),Exhaust tail pipe orientation - curved pipe pointing to rear.

219-035bEXHAUST BLANKETS

FOR CUMMINS DIESEL OR CNG

(B),Cummins Diesel / CNG exhaust blankets - provided for the exhaust tubes.

219-045 ENGINE SWITCH BOX(C),Engine switch box - basic configuration with run control, start and engine compartment light switches.

Located at curbside of center rear in engine compartment.

219-045bENGINE SPEED

CONTROL AT SW BOX(A),Engine speed control at engine switch box - Morse throttle (controls engine RPM).

219-050ENGINE COMPT

GAUGES

(S),Engine compartment gauge - programmable CAN communicator. Standard Features: Engine Oil Pressure, Engine Water temperature, Tachometer, 12V/24V battery voltage, Hour Meter, Active Faults, Drivetrain Specific

featurees.

219-050h C-COM DRIVETRAIN (B),C-COM Drivetrain - Fluid Level, Oil Temperature.

219-070TRANSMISSION

DIPSTICK, LOCATION(B),Transmission dipstick, location - Oil level indication on curbside.

219-075 ALTERNATOR (B),Alternator - EMP Power 450.

219-090P-CLIPS,ENGINE COMPT

& HVAC(B),Engine compartment and HVAC system p-clips - UMPCO SST with high temperature boxed silicon cushion

provided to secure air and fluid lines to structure.

219-175a BELT GUARD LATCHING (B),Belt guard latching - rubber hood latch.

219-175b A/C BELT GUARD

219-175b A/C BELT GUARD (B),A/C belt guard - the A/C pulley guard is bolted. Yellow powdercoated.

219-195 OIL SAMPLING (A),Oil sampling - required for engine, using probalizer fittings.

231-005RADIATOR,CAC,HYDR

FLUID COOLER(B),Radiator - EMP MH4 GEN4 with full diagnostic capabilities. 4 x 15" fans.

231-005gRADIATOR REVERSE FAN SW & DIAG LAMP

(C),Radiator reverse fan switch & diagnostic lamp - located at engine switch box.

231-020 SURGE TANK (B),Surge tank - Dual cylindrical SST tanks with isolated cabin heating loop.


25


231-020aLOW COOLANT

CONDITION

(B),Low coolant condition - an early warning(maintenance) sensor at the surge tank signals the instrument panel Low Coolant telltale. A lower(derate) sensor signals engine shutdown and the Check Engine and Low Coolant

telltales.

231-020adSURGE TANK ENG MAINT & DERATE

SENSOR MFR(B),Surge tank engine maintenance & derate sensor manufacturer - Fozmula.

231-020bSURGE TANK

PRESSURE TEST PORT(B),Surge tank pressure test port - provided.

231-020dSURGE TANK

PRESSURE RELIEF VALVE

(B),Surge tank pressure relief valve - Radiator cap (LEV-R VENT), built into surge tank cap.

231-020eSURGE TANK SIGHT

GLASS(S),Surge tank sight glass - graduated sight glass (glass material).

231-040 RAD TUBES (S),Coolant tubes - SST.

231-075COOLANT

FLUID/ANTIFREEZE(B),Coolant fluid / antifreeze - 50/50 pre-mixed distilled water with ethylene glycol with anti-corrosion additive

and bittering agent. Pink fluid.

231-085TRANSMISSION/HYBRID

DRIVE COOLER(B),Transmission oil cooler - Modine LCOC.

231-085aTRANSMISSION/HYBRID

OIL COOLER HOSES(S),Transmission / hybrid drive oil cooler hoses - NFIL (Manuli) Equator 1.

231-120COOLANT RECOVERY

TANK(S),Coolant Recovery tank - required.

234-005 WATER FILTER (A),Water filter - for Cummins, single release filter, pre-charged, with 1/4 turn ball shut-off valves.

241-040 CNG FUEL TANKS(B),CNG fuel tanks - for US 35' or 40' coach. Includes six Agility Fuel Solutions All Carbon Fiber(ACF) 15.7"

OD x 120" long CNG roof mounted cylinders with OMB ESA 24V solenoid valve. Total system capacity is 19,770 scf at 3600 psi.

241-040a CNG FUEL LINES (B),CNG fuel fill lines - 1.00" SST lines with Swagelok fittings.

241-040bCNG PRESSURE RELIEF

DEVICE(S),CNG pressure relief device - One remote OMB York and one PRD integrated into tank valve. Operating

pressure: 0 - 3600 psi. Operating temperatures: -40 F to 180 F, thermal relief (nominal 230 F).

241-040dCNG UNLOADER

PROVISION(B),CNG unloader provision - for Swagelok AFS valve with quick connect fitting.

241-040eCNG FUEL FILL RECEPTACLES

(B),CNG fuel fill receptacle - Parker Standard Fill (NGV1) and Fast Fill (Heavy Duty) receptacles set at 3600 psi. With dust cap.

241-040gCNG FUEL LINE IDENTIFICATION

(S),CNG fuel line identification - SST lines are labeled with yellow adhesive warning labels at every 36".

241-040hCNG TANK ISOLATION

VALVES(B),CNG tank isolation valves - Integral with tank valve.

241-045aCNG FUEL FILL DOOR

INTERLOCK(B),CNG fuel fill door interlock - shuts down engine when fuel fill door is open. Prevents engine restart.

Programmable timing details are required for Electrical.

241-045dCNG PRESS

[email protected](A),Low CNG indicator - lamp on instrument panel, triggers at 500 psi.

241-065aCNG ROOF EQUIPMENT

NON-SKID SURFACE(B),CNG roof equipment, non-skid surface - provided where required.

246-001AIR COMPRESSOR DISCHARGE LINE

(S),Air compressor discharge line - Teflon 2807 SST braided hose.

246-005 AIR TANKS(B),Air tanks - two dual compartment ceiling mounted tanks combining wet tank and rear brake tanks,

accessories tank and kneeling tank and a single front brake tank .

246-005bAIR TANK DRAIN

VALVES(A),Air tank drain valves - manual valves except for Haldex auto-moisture ejection valve for wet tank.

246-015 SUSPENSION CONTROL (B),Suspension control - SmartRider Intelligent Kneeling system on front axle.

246-015b RIDE HEIGHT SENSORS(B),Ride height sensors - SmartRider electronic leveling system on front axle and Barksdale mechanical leveling

valves on center/rear axles.

246-015dRIDE HEIGHT

SETTINGS,NORMAL(B),Ride Height Settings,Normal - front ride height is 4.0" axle to bump stop.

246-020 DOOR INTERLOCK(A),Door interlock - applied to exit door. Foot on brake to release interlock, applied via multiplex system

programming.

246-040DRIVER'S PARK BRAKE

ALARM(B),Driver's park brake alarm - if the Master Run switch is in the OFF or PARK positions, the kneeling alarm is

triggered to alert the driver that the park brake is not set.


26


246-040aPARK BRAKE

PRESSURE SETTING(S),Park brake pressure setting - 40 psi auto-apply park brake valve. 60 psi pressure switch for park brake light

activation.

246-060 AIR DRYER (A),Air dryer - Bendix AD-IP Tandem air dryer with IPC (Integrated Puraguard Cartridge).

246-060a AIR DRYER LOCATION (S),Air dryer location - behind the rear streetside wheelhouse, on the bulkhead.

246-060d AIR DRYER VOLTAGE (A),Air dryer voltage - 12 volt.

246-065PARK BRAKE ACTUATION

(B),Park brake actuation - Pull To Apply.

246-065aPARK/EMERG BRAKE

LOCATION(S),Park brake control location - on side console panel.

246-105aREAR AIR CHARGE FITTING LOCATION

(S),Rear air charge fitting location - routed to curbside of engine.

246-105bREAR AIR CHARGE CONNECTOR TYPE

(B),Rear air charge connector type - male 1/4" NPT fitting.

246-105fMUFFLER

TANK,REMOTE DRAIN(B),Muffler tank remote drain valve - required.

246-120FRONT TOW CONNECTOR

(B),Front tow connector fitting - 1/4" male NPT fitting with tag.

246-120aFRONT AIR

CONNECTOR ARRANGEMENT

(B),Front air connector arrangement - located below the bumper, streetside.

246-125FRONT AIR CHARGE

CONNECTOR(B),Front air charge connector - 1/4" male NPT fitting with tag.

246-130 FLEXIBLE AIR LINES(S),Flexible air lines - Synflex colour coded. Green: rear service brakes and supplies. Red: front service brakes. Brown: parking brake. Black: accessories and brake hose. Yellow: compressor and governor. Blue: suspension.

246-225 ABS (S),ABS braking system - Wabco.

260-003BATTERY VOLTAGE

REGULATOR(B),Battery voltage regulator - Transtech REG24A1 with Deutsch connector

260-003aBATTERY VOLTAGE

REGULATOR LOCATION(B),Battery voltage regulator location - Mounted inside fuse box

260-005aTWO BATTERIES,TYPE /

MFR(B),Batteries - two East Penn 8D Flooded lead acid maintainable batteries. 1400 CCA. Drop posts: 1/2"

positive, 3/8" negative.

260-005d BATTERY CABLES(S),Battery cables - red heat shrink on 24 volt positive cable end and light blue heat shrink on 12 volt positive

cable end.

260-010 BATTERY TRAY(S),Battery tray - slide out battery acid resistant polyethylene enclosure with SST sub frame, SST bearings and rubber isolation mounts. Located aft of the curbside rear wheelhouse. Note: battery access door opens to the

side.

260-025POSITIVE BATTERY DISCONNECT SW

(A),Positive battery disconnect switch - required with quick access through flip-open door (No engine shutdown feature).

260-030BATTERY VOLTAGE

EQUALIZER(B),Battery voltage equalizer - Vanner 100 amp with jump start override.

260-035JUMP START

MANUFACTURER/TYPE(A),Jump start manufacturer/type - ANDERSON SB350 GREY

260-035a JUMP START LOCATION (A),Jump start location - near the battery disconnect switch at the fusebox. Accessible via the flip-open door.

260-820ROOF FAIRING / SKIRTS

ENCLOSURE(S),Roof fairing / skirt enclosure - CNG tank enclosure for XN's.

269-002P.A. AMPLIFIER MFR /

TYPE(B),P.A. amplifier manufacturer / type - REI. Requires a separate gooseneck or handheld microphone.

269-003GOOSENECK MICROPHONE

(B),Gooseneck microphone - REI, approximately 30" long from base to end of microphone. Black neck and head.

269-003aGOOSENECK MICROPHONE

LOCATION(B),Gooseneck microphone location - inverted, clipped to the A-pillar.

269-003bGOOSENECK

MICROPHONE SWITCH(B),Gooseneck microphone switch - built into microphone.

269-005INTERIOR SPEAKER

MFR(B),Interior speaker manufacturer - TCB.


27


269-005baPRIMARY INTERIOR

SPEAKERS,QTY FOR 35'(S),Primary interior speakers, quantity - six: four to light panels, two above rear bench.

269-010EXTERIOR

SPEAKERS,LOCATION(B),Exterior speaker, location - at basic location above entrance. Includes baffled cover.

269-010aEXTERIOR SPEAKER

MFR(B),Exterior speaker manufacturer - Shekonic.

273-005 HEADLIGHTS (S),Headlights - NFIL Xcelsior LED low beam and high beam headlights.

273-005a DAY RUN HEADLIGHTS (B),Day run headlights - required.

273-005b FRONT TURN SIGNALS (S),Front turn signals - NFIL amber LED. Integrated with headlight assembly.

273-010TAIL LIGHTS QTY PER

SIDE(B),Tail lights quantity per side - four.

273-010abFOUR TAIL LIGHT ARRANGEMENT

(A),Four tail light arrangement (top to bottom) - red, amber, red, white.

273-010b TAIL LIGHTS MFR (A),Red / amber tail light manufacturer - 7" Dialight LED.

273-010dWHITE BACK-UP LIGHT

MFR(S),White back-up light manufacturer - 4" Dialight LED.

273-010eSTOP LIGHTS ON WITH RTRDR/REGEN BRAKE

(B),Stop light activation by transmission retarder / regenerative braking - required.

273-010fSTOP LIGHTS ON WITH

PARK BRAKE OR INTERLOCK

(S),Stop light activation - when park brake or interlock are engaged.

273-015CENTER STOP /

DECELERATION LIGHTS(A),Center stop lights (red) - two Dialight 18" X 1" LED above the engine door.

273-020SIDE TURN

SIGNALS,TYPE / QTY PER SIDE

(B),Side turn signals, type and quantity per side - 2 amber Dialight LED with guards. Lamps are at fore of all wheelhouses except curbside front which is aft. For non-60' coaches.

273-020dSD TURN SGNL GUARD BRKT, MATERIAL/CTG

(B),Side turn signal guard bracket material and coating - Aluminum, painted per paint scheme.

273-025KNEELING/RAMP LIGHT

AT ENTRANCE(S),Kneeling / ramp deployment warning light at entrance - 2.5" Dialight LED.

273-035MARKER / CLEARANCE

LIGHTS(B),Marker and clearance lights - Dialight LED without guard all around.

273-040 REFLECTORS (B),Reflectors - self-adhesive decals installed at NFIL basic positions.

273-045REAR LICENCE PLATE

LIGHT(B),Rear licence plate light - LED.

273-050aTIMED SHUT-OFF,ENTR

AREA LIGHTS(B),Timed shut-off of entrance area lights (interior and/or exterior) - the program is set to shut the lights off

when the door closes.

273-055aTIMED SHUT-OFF,EXIT

AREA LIGHTS(S),Timed shut-off of exit area lights (interior and/or exterior) - the program is set to shut the lights off five

seconds after the door closes.

277-005INTERIOR PASSENGER

LIGHTING(B),Interior passenger lighting - TCB LED, 24 VDC.

277-005fINTERIOR LED LIGHT

FUNCTIONALITY(B),Interior LED light functionality-first bank of lights (at 0% pre-set) on each side turn on when entrance door is

opened and off when door is closed.

277-010aTINTED LED

PASSENGER LIGHT COVERS

(A),Tinted LED passenger light covers - blue, first two banks of lights on each side, the rest are white. Reduces the light levels below the recommended 15 ft-candle at the reading plane.

277-015 FAREBOX LIGHT (B),Farebox light - one fixed LED light.

277-020 DRIVER'S LIGHT (B),Driver's light - one sealed 2.5" white high output LED light.

277-025 SDS SERVICE LIGHT (B),SDS Service light - One LED lamp, provided at upper front of SDS enclosure.

277-025bSDS SERVICE LIGHT SWITCH CONTROL

(B),SDS Service light switch control - with switch

277-030ENGINE COMPARTMENT

LIGHTS(B),Engine compartment lights - four 1.38" LED lights.

277-035 REAR DECK STEP LIGHT (S),Rear deck step light - LED.


28


277-040INTERIOR DOOR HEADER LIGHTS

(B),Interior door header lights - one LED strip light (approx 18" long) provided above exit (if applicable) and entrance doors. With anti-glare shield.

277-070aREAR PLC AND

FUSEBOX SERVICE LIGHTS

(S),Rear PLC compartment and fusebox lights - provided, LED.

280-001PASSENGER SIGNAL CHIMES, FOR NON-60'

(B),Passenger signal chimes - one basic electronic chime above driver. Chime has single tone which sounds once for regular activation, twice for wheelchair positions.

280-002PASSENGER SIGNAL

PULLCORDS(B),Passenger pullcords - yellow cords are required.

280-002aPASSENGER PULLCORD

HARDWARE(B),Passenger pullcord hardware - Phillips.

280-003HORIZONTAL

PASSENGER SIGNAL PULLCORDS

(B),Horizontal passenger signal pullcords - set at NFIL designated basic height.

280-005abLOWER DECK VERT PULLCORDS, FOR 35'

(A),Lower deck vertical pullcords - three: two at first and second streetside pillars and one at second curbside pillar forward of the face of the upper deck.

280-005eSECUREMENT OF

VERTICAL PULLCORDS(B),Securement of vertical pullcords to horizontals - looped or clamped to the horizontal depending on the

location.

280-010FRONT STOP REQUEST

SIGN TYPE/POSITION(B),Front stop request sign type / position - Smartrend LED installed overhead between the front wheelhouses.

280-010aFRONT STOP REQUEST

SIGN TEXT(A),Front stop request sign text - Stop Requested - Parada.

280-010bFRONT STOP REQUEST

SIGN LETTERING(B),Front stop request sign lettering - upper case.

280-011NON-60' REAR STOP

REQUEST SIGN(A),Rear stop request sign - Smartrend two sided LED, ceiling mounted, near exit area.

280-011aNON-60' RR STOP

REQUEST SIGN TEXT(A),Rear stop request sign text - Stop Requested - Parada.

280-011tREAR STOP REQUEST

SIGN LETTERING(A),Rear stop request sign lettering - upper case.

280-012STOP REQUEST SIGN

COLOURS(C), ,Stop request sign colours - red letters on a white background.

280-015PASS SIGNAL AT

WHEELCHAIR POSITIONS

(A),Passenger signals at wheelchair positions - touch pads.

280-025PUSH BUTTON SIGNAL

AT EXIT(A),Push button signal at exit - mounted facing aisle on stanchions fore and aft of exit.

280-025aPUSH BUTTONS,VERT &

SEAT STANCHI(C), Push button signal at seat stanchions - mounted various seat stanchions, as per customer specified

locations.

280-025bPUSH BUTTONS,FRT

WHEELHOUSES(C), ,Push button signals on front wheelhouse stanchions - required, location and qty as per customer specified

details.

284-001ELECTRONIC CONTROL

SYSTEM(S),Electronic control system - Vansco.

284-001a SYSTEM VOLTAGE (S),System voltage - 24 VDC primary, 12 VDC secondary.

284-001b SWITCHES (S),Switches - water resistant.

284-001dSPARE INPUT/OUTPUT

PORTS(S),Spare I/O (Input/Output) ports for multiplex system modules - minimum 10% input and 10% output, per

electrical panel location.

284-005SIDE CONSOLE

LIGHTING(A),Side console lighting - LED lamps.

284-005gHAZARD WARNING

LIGHTS(S),Hazard warning lights - front, side and rear lights flash for hazard warning.

284-800aSDS ELECTRICAL PANEL

ORIENTATION(B),SDS electrical panel orientation - facing curbside.

284-NEWNEW OPTION,284

GROUP(C),Custom activation of hazard warning lights- activated when entrance or exit doors are opened.

286-001 INSTRUMENT PANEL(B),Instrument panel - LCD display screen. Acrylic material with luminescent lighting, with Vansco Instrument

Panel Cluster module.

286-001aSHIFT SELECTOR

LOCATION(S),Shift selector - located on instrument panel.

286-001b EXTERIOR LAMP TEST (S),Exterior lamp test - simultaneously depress both turn signals.


29


286-010a SPEEDOMETER(S),Speedometer - part of Vansco instrument panel cluster. Set to display miles. With odometer (the display can

be toggled to show Trip1, Trip 2, engine hours).

286-010bAUDIBLE SOUND,TURN

SIGNALS/HAZARDS(B),Turn signal and hazard warning audible sound - using click sound for turn signal and for hazard warning.

286-010eBRK/ACCEL INTERLOCK

DEACTIV WRNG(A),Brake accelerator interlock deactivated warning - provided by audible alarm and separate red warning lamp

on instrument panel. (Must have in California.)

286-055DOOR MASTER SWITCH

LOCATION(A),Door master switch location - installed in destination sign compartment.

286-055aRETARDER DISABLE SWITCH LOCATION

(C),Retarder disable switch location - inside destination sign compartment.

286-065 SILENT ALARM (A),Silent alarm - required.

286-065aSILENT ALARM SW

LOCATION(A),Silent alarm switch location - at side console.

286-070DIAGNOSTICS PLUG

LOCATIONS(S),Diagnostic plug locations - under the front dash (left side of the steering column), at forward face of the

SDS barrier (above driver) and at the engine switch box.

286-085SWEEPER LIGHT

SWITCH(A),Sweeper light switch - required.

289-001SECUREMENT OF

HARNESSES(B),Securement of harnesses - hellerman tyton clamps, with Panduit releasable cable ties.

296-001WIRING DECAL,REAR

PLC AND FUSEBOX(S),Wiring decal, rear PLC and fusebox - provided, laminated.

296-001aWIRING DECAL,SIDE

CONSOLE(B),Wiring decal, side console - laminated, shipped loose.

298-050WATER TEST

DURATION(B),Water Test Duration - 10 minutes.

304-001a EXTERIOR PAINT TYPE (S),Exterior paint type - Axalta Imron Elite high solids polyurethane.

304-001d PAINTED JACK PADS (A),Painted jack pads - Safety Yellow.

304-010CORROSION PROTECTION

(B),Corrosion protection - grit blasted frame, moisture cure zinc-rich primer (applied for 12 year warranty protection), anti-chip undercoating, corrosion preventive coating sprayed inside frame tubes up to roof line.

304-015 EXTERIOR LOGOS,NFIL (B),Exterior logos, NFIL - required.

304-020NFIL SAFETY AND

MAINTENANCE DECALS(A),New Flyer safety and maintenance related decal package - safety decals in English /Spanish, maintenance

decals in English.

304-020bINTERIOR PASSENGER

RELATED DECALS,LANGUAGE

(A),Interior passenger related decals, language - English / Spanish.

304-020dINTERIOR FLEET NUMBER DECALS

(B),Interior fleet number decals - required.

304-025KNEELING / RAMP

DECALS(B),Kneeling / ramp decals - NFIL basic ramp & kneeling decal (red on white) and an arrow decal (red and

black) provided near the kneeling / ramp deployment lights.

304-030 AIR TANK DECALS (B),Air tank decals - NFIL basic.

304-035EXT FLEET

NUMBERS,NON-ROOF(B),Exterior fleet numbers, non-roof - required (reflective or non-reflective as per spec).

306-005 FIRE EXTINGUISHERS(B),Fire extinguisher - 5 lb ABC class. With gauge, hose and mounting bracket. UL compliant for US

customers.

306-005aFIRE EXTINGUISHER

LOCATION(A),Fire extinguisher location - mounted on the front curbside luggage rack.

306-010 SAFETY TRIANGLES (B),Safety triangles - triangle reflector.

306-010aSAFETY TRIANGLE

LOCATION(A),Safety triangle location - in equipment box on curbside luggage rack.

350-001DRIVER'S PEDALS, POSITION / TYPE

(A),Driver's pedals positions / type - adjustable pedal assembly.

350-002bADJUSTABLE PEDAL BRAKE/THROTTLE

ANGLE(B),Brake / Throttle pedal angle - brake set at 45 degrees, throttle at 45 degrees from pedal to floor.

350-005 BRAKE VALVES (S),Brake valve - E6.


30


350-015TURN SIGNAL

SWITCHES(B),Turn signal switches - basic switches, floor mounted.

350-015a DIMMER SWITCH (B),Dimmer switch - basic foot switch.

350-015dHAZARD WARNING

LIGHT SW LOCATION(A),Hazard warning light switch location - on side console with additional foot switch.

350-030 STEERING COLUMN (B),Steering column - Douglas Autotech with tilt and telescopic features.

350-030a STEERING WHEEL (A),Steering wheel - 3 spoke, 22" diameter hard plastic.

350-035 DUAL HORN (S),Dual horn - provided with splash shield.

400-001a JACKING / LIFTING PADS (B),Jacking / lifting pads - 4" diameter round pads at front and rear chassis.

420-005DEFROSTER ACCESS

DOOR(B),Defroster access door - top hinged with two gas struts, quarter turn chrome plated 5/16" square key latches.

420-010 EXTERIOR SIDE PANELS (S),Exterior lower side panels - fiberglass.

420-035aCURB & STREET

ENG,S/CONS DOORS,STRUTS

(B),Struts for curb and street side engine compartment, side console access doors - supported by gas struts.

420-035bCURB & STREET ENG

COMPT, BATTERY DOORS,LATCHES

(B),Curb and street side engine compartment doors, latches - quarter turn chrome plated 5/16" square key latches. Also, used for the separate battery access door.

420-035dCURB SIDE ENGINE

COMPT DOOR(B),Curb side engine compartment door - includes battery disconnect switch access door (using a gas strut).

Also includes CNG fuel fill access door.

420-035eBATTERY

COMPARTMENT DOOR(B),Battery compartment door - solid door located aft of the curb side rear wheel, separate from the engine

compartment.

420-035fSTREET SIDE ENGINE

COMPT DOOR(B),Streetside engine (radiator) access door - with wavy screen.

420-040a SURGE TANK DOOR (B),Surge tank door - basic hinged door.

420-045SIDE CONSOLE DOOR

LATCHES(B),Side console door latches - quarter turn chrome plated 5/16" square key quad latches.

420-050 ENGINE DOOR (A),Engine door - screened door with built-in handle.

420-050a ENGINE DOOR STRUTS (B),Engine door struts - two, the streetside strut has a locking mechanism.

420-050b ENGINE DOOR LATCHES (B),Engine door latches - quarter turn chrome plated 5/16" square key quad latches.

420-050eREAR LICENSE PLATE

RETENTION(C),Rear licence plate retention- shiploose

420-060 RAIN GUTTER (S),Rain gutter - .44" cross section bonded.

420-067ROOF HATCH INSTRUCTION

LANGUAGE(A),Roof hatch instruction language - English / Spanish.

420-067aROOF HATCH SIZE,FRONT

(B),Roof hatch size,front - 24" X 24"

420-067ab ROOF HATCH TYPE,FRONT

(A),Roof hatch type,front - motorized.

420-067acROOF HATCH

VENDOR,FRONT(B),Roof hatch vendor,front - Transpec Worldwide.

420-069aROOF HATCH

SIZE,REAR(B),Roof hatch size,rear - 24" X 24"

420-069abROOF HATCH TYPE,REAR

(A),Roof hatch type,rear - motorized.

420-069acROOF HATCH

VENDOR,REAR(B),Roof hatch vendor,rear - Transpec Worldwide.

420-070 WIPERS (B),Wipers - Comotech motors 24 volt electric with Smartrend wet arm wipers. Intermittent.

420-075WINDSHIELD WASHER

BOTTLE(B),Washer bottle - 5 US gallon with electric powered pump.


31


420-075aWINDSHIELD WASHER

FILL LOCATION(S),Windshield washer fill location - accessed via a flip-out door built into the exterior side console access door.

420-080 LOWER DRIVER'S VENT (B),Lower driver's vent - provided.

420-120 FENDERS (B),Fenders - molded polyurethane.

420-125 EXTERIOR UPPER REAR (B),Exterior upper rear - louvered style fiberglass door for RR HVAC.

420-125aEXT UPPER REAR DOOR

STRUTS(B),Exterior upper rear door, struts - two, non-locking.

420-125bEXT UPPER REAR DOOR,LATCHES

(B),Exterior upper rear door, latches - quarter turn chrome plate 5/16" square key latches.

420-135FRONT LICENSE PLATE

LOCATION(B),Front license plate location - on center of defroster door.

420-135aFRONT LICENSE PLATE

RETENTION(B),Front license plate retention - four inserts.

421-010INSULATION,SIDEWALL

AND ROOF(S),Insulation, sidewall and roof - polyisocyanurate foam. meets Docket 90 spec.

421-020INSULATION,EXHAUST

CAVITY(S),Exhaust cavity insulation - Heat-resistant fiberglass mat.

421-030ENGINE COMPARTMENT

INSULATION(S),Engine compartment insulation - noise reduction acoustical foam, retained by perforated aluminum panels.

422-005CEILING PNLS AFT OF

FRT W/HS INCL RR PLC(B),Ceiling panels aft of the front wheelhouses (including rear PLC) - Antique white plastic, SST trim.

422-005aCEILING / HVAC COVER

PANELS ABOVE FRT W/HS

(B),Ceiling / HVAC cover panels above front wheelhouses - Antique White fiberglass.

422-006ENTRANCE / DRIVER'S AREA PANELS COLOUR

(B),Entrance/driver's area panels colour - black. Includes dash, dest sign c/out, ent. mech. box, driver's o/head panels. and if used, ent. floor heat duct, frt. RH harness cover is black powder coated alum.

422-006bDRIVER'S CEILING PANEL MATERIAL

(B),Driver's ceiling panel material - melamine.

422-009INTERIOR PIER PANEL

MATERIAL(B),Interior pier panel material - thermoplastic.

422-010 PIER PANEL COLOUR (B),Pier panel colour - Antique white, thermoplastic.

422-015bINTERIOR SIDEWALL

MELAMINE(C), Interior sidewall melamine colour - Beige Gloss.

422-025INTERIOR ENGINE

COMPT ACCESS PANEL(B),Interior engine compartment access panel - there is a single hinged panel under the rear seat.

422-035INTERIOR UPPER REAR

PANEL(A),Interior upper rear panel - bulkhead panel covered with melamine material. With return air grille for RR

mount HVAC system.

422-035aCARPET / FABRIC,UPR

REAR INT PANEL(B),Upper rear interior carpeted / fabric panel - Charcoal Grey carpet with 1/2" plywood backing.

422-035bMELAMINE UPR REAR

INT PANEL(B),Upper rear interior melamine panel - Antique White Gloss.

422-035baTRIM,MELAMINE UPR RR

INT PANEL(A),Trim for melamine upper rear panel - all SST.

422-035eC/S,S/S RR BULKHEAD

ACCESS PANELS(A),Curb and street side rear bulkhead access panels - melamine covered DB plywood.

422-050aHRNS/AIR LINE COVERS

AT UPPER DECK(B),Harness / air line covers at upper deck - painted flat black.

422-060FRT DEST SIGN DOOR

LATCHES(B),Front destination sign door latches - short wing quad latches.

422-061DRIVER'S OVERHEAD

PANEL(S),Driver's overhead panel - with locker.

422-061aDRIVER'S LOCKER

LATCH(B),Driver's locker latch - short wing quad latch.

422-065DRIVER'S COAT HOOK

AND STRAP(B),Driver's coat hook and strap - located on the forward face of the harness cover behind the driver.

422-070SECURE DIAGNOSTIC

STATION(B),Secure diagnostic station - above street side front wheelhouse. Incorporates driver's barrier. With four Take

One pockets. Quantity of trays as per customer and / or as per electronic equipment within compartment.


32


422-070aSDS ENCLOSURE

COLOUR(B),SDS enclosure colour - Flat Black.

422-070bSDS ENCLOSURE DOOR

LATCHES(B),SDS enclosure door latches - 5/16" square key quad latch.

422-085FRONT SUNVISOR /

ROLLERBLINDS(C),Front rollerblind - grey mesh blind with 6" inch solid vinyl at bottom. Scissor type with 20" travel.

422-085aSIDE

SUNVISOR/ROLLERBLIND

(A),Side sunvisor - black padded.

422-090 SQUARE KEY T-HANDLE (B),Square key t-handle - located at lower left of driver.

422-105ENTRANCE MECHANISM

BOX DOOR LATCH(B),Entrance mechanism box door latches - two short wing quad latches.

422-160GRAB HANDLE NEAR FRONT ROOF HATCH

(B),Grab handle near front roof hatch - required.

422-NEWNEW OPTION,422

GROUP(C), Watch your step sign - rquired,illuminated rear of coach.

423-010AD FRAMES,SDS

ENCLOSURE(C), Ad frames, SDS box - 14" x 20" rear facing.

450-010 FLOORING(B),Flooring - lower deck uses pressure treated NT ACQ plywood. Upper deck uses composite for step and

floor to the rear wheelhouses and NT DB ACQ plywood to the rear.

450-013DRIVESHAFT /

TRANSMISSION ACCESS PANELS

(B),Driveshaft / transmission access panels - one panel only set in the floor to access the driveshaft.

450-025aALTRO FLOOR

COVERING(A),Altro floor covering - Black TFM 27892 (2.7 mm / 0.11" thick) for aisle and underseats.

450-025e STEP TO UPPER DECK (B),Step to upper deck - yellow anti-slip coating is applied to the edges and vertical faces of the step.

450-025f STANDEE LINE (B),Standee line - yellow.

450-025g ENTRANCE NOSING (B),Entrance nosing - nosing is 2" wide yellow anti-skid applied to the ramp.

450-025h EXIT NOSING (B),Exit nosing - 2.5" yellow nosing for Altro / Tarabus flooring.

450-025jREAR SEAT RISER

COVERING MATERIAL(B),Rear seat riser covering material - same material and colour as used for the flooring.

450-030DRIVER'S PLATFORM

FLOORING(A),Driver's platform flooring - Altro.

450-030aDRIVER'S PLATFORM

TRIM(B),Driver's platform trim - SST.

450-045 OUTER WHEELHOUSES (B),Outer wheelhouses - SST front and rear.

450-055INTERIOR FRONT

W/HOUSE (LUGG RACK) COLOURS

(A),Interior front wheelhouse (luggage rack) colours - Limousine Grey, gelcoat. An LED aisle light is provided on the streetside. Also, SST scuff guards are provided.

450-076a TRIM UPPER DECK (B),Trim upper deck - Aluminum.

460-005 WINDSHIELDS (B),Windshield - 72% light transmittance green laminated. With blue shade band for street and curb sides.

460-005aWINDSHIELD

PROTECTIVE FILM(B),Windshield protective film - required for coach delivery beyond a 500 mile radius of Final Assembly.

460-010PASS / DRVR'S

WINDOWS MANUFACTURER

(B),Passenger and driver's windows, manufacturer - Arow Global non-flush mounted.

460-010bNON-FLUSH

PASSENGER WINDOWs(B),Non-flush passenger windows - bottom is fixed, top tip-in.

460-010ba SDS WINDOW (B),SDS window - Bottom is fixed, top is fixed. Glazing matches passenger window.

460-010eNON-FLUSH WINDOW

GLAZING(B),Non-flush window glazing - grey, 44% light transmittance, laminated.

460-010gNON-FLUSH WINDOW

LOCKS(C),Non-flush window lockes - Allen key set-screw on slider


33


460-010hWINDOW FRAME

COLOUR(B),Window frame colour - all window frames are black anodized.

460-010jWINDOW EMERGENCY

EGRESS(S),Emergency egress windows - minimum quantity based on FMVSS requirements, local, state/provincial,

federal regulations or customer spec whichever is greater.

460-010kSIDE DESTINATION

SIGN WINDOWS(B),Destination sign window - curb side. Fixed clear top and fixed bottom. Bottom matches passenger window

glazing. (review 470 for side sign details).

460-010nWINDOW GLAZING

REPLACEMENT(A),Window glazing replacement for servicing - rapid replacement.

460-010pPASS WINDOW LINERS

AND COATINGS(C),Window liners and coatings - .12" acrylic liners on all windows.

460-010sPASS WINDOW

THICKNESS(B),Passenger window thickness - 6 mm.

460-011aDRIVER'S WINDOW,NON-

FLUSH(B),Driver's window, non-flush mounted - with fore and aft sliding sashes. The forward sash has exterior and

interior handles. Non-egress.

460-011bAFT SASH,NON-FLUSH

DRIVER'S WINDOW(B),Aft sash, non-flush driver's window - with interior handle and latch.

460-011dDRIVER'S WINDOW

GLAZING(B),Driver's window glazing - laminated with minimum 70% light transmittance.

460-011eDRIVER'S WINDOW

SHADE BAND(B),Driver's window shade band - not required.

470-001DESTINATION SIGNS

MFR(A),Destination sign mfr - Hanover, LED display system.

470-001aDEST SIGN CONTROL

UNIT LOCATION(B),Destination sign control unit location - under driver's overhead panel.

470-005dHANOVER

FRT.DEST.SIGNS(A),Hanover front destination sign - amber LED, 17 x 160 pixels.

470-010FRONT DESTINATION

SIGN GLASS(A),Front destination sign glass - heated and laminated.

470-025CURB SIDE

DESTINATION SIGN LOCATION

(B),Curbside destination sign location - basic, at the first window, aft of entrance door. Note: this allows a maximum display width of approximately 40".

470-025eHANOVER CURBSIDE

DEST.SIGNS(A),Hanover curbside destination sign - Amber LED, 8 X 96.

470-035REAR ROUTE

SIGN,LOCATION(B),Rear route sign location - at the lower center of the rear HVAC door. For CNG coaches.

470-035eHANOVER REAR ROUTE

SIGNS(A),Hanover rear route sign - amber LED, 15 x 48.

470-060 AVA / AVL SYSTEM(A),AVA / AVL system - provisions for future undetermined AVA / GPS system. Installation of ground plates,

conduit and fish wire as per customer spec. (No antenna, no cables).

470-075NEW FLYER CONNECT-

DIAGNOSTIC & MONITORING SYSTEM

(A),New Flyer Connect-Diagnostic & Monitoring - required without driver maneuver awareness system (DMAS).

480-005STREET SIDE MIRROR

MANUFACTURER(B),Street side mirror manufacturer - Hadley.

480-005aHADLEY STREET SIDE

MIRROR(B),Hadley street side mirror - 8" x 15", 2/1 (upper portion is flat, smaller lower portion is convex).

480-005bSTREET SIDE MIRROR

POWER OPTIONS(A),Street side mirror power options - single remote control, heated. (If two pieces of mirror, then only the upper

portion is remote controlled and heated.)

480-005eSTREET / CURB SIDE

MIRROR W/TURN SIGNAL

(A),Street and curb side mirror with turn signal - LED, in mirror glass.

480-005fSTREET SIDE MIRROR

ARM(B),Street side mirror arm - basic, pull-back. Mirror arm is manually returned to its previously set position after

deflection.

480-005gSTREET SIDE MIRROR

MOUNT(B),Street side mirror mount - low mount.

480-005hSTREET / CURB SIDE

MIRROR VOLTAGE(B),Exterior mirror voltage - 12 volt.

480-006CURB SIDE MIRROR

MANUFACTURER(B),Curb side mirror manufacturer - Hadley.

480-006aHADLEY CURB SIDE

MIRROR(B),Hadley curb side mirror - 8" x 15", 2/1 (upper portion is flat, smaller lower portion is convex).

480-006bCURB SIDE MIRROR POWER OPTIONS

(A),Curb side mirror power options - single remote control, heated. (If two piece mirror, then only the upper portion is remote controlled.)


34


480-006eCURB SIDE MIRROR

ARM(B),Curb side mirror arm - basic, pull-back. Mirror arm is manually returned to its previously set position after

deflection. Mirror can be folded forward or backward for bus wash.

480-007STREET / CURB SIDE

HEATED MIRROR ACTIVATION

(A),Street and/or curb side heated mirror activation - switch at the side console.

480-010INTERIOR

MIRRORS,MANUFACTURER

(C),Interior mirrors, manufacturer - Lucerix.

480-010aDRIVER'S REAR VIEW

MIRROR(A),Driver's rear view mirror - 8" x 15", black, flat.

480-010b SPOT MIRROR (B),Spot mirror - 6" diameter flat mirror, located at curb side front.

480-010d EXIT DOOR MIRROR (B),Exit door mirror - convex, 12" diameter.

480-010fOVERHEAD ENTRANCE (STEPWELL) MIRROR

(A),Overhead entrance (stepwell) mirror - ceiling mounted, 7" x 10", convex.

490-001 ENT DOOR DRIVE SYS (B),Entrance door drive system - Pneumatic

490-005 ENTRANCE DOOR (B),Entrance door - Vapor slide glide.

490-005aENTR DOOR LIMIT SWITCH SET-UP

(A),Entrance door limit switch - solid state proximity switch.

490-005dENTRANCE DOOR

MAGNETIC DUMP VALVE(B),Entrance door magnetic dump valve - required, located at baseplate.

490-005fENTR/EXIT

FRANG.COVER,LANGUAGE

(A),Entrance / exit door frangible cover instructions (for emergency release), language - English and Spanish.

490-006ENTRANCE DOOR

HANDLES(A),Entrance door handles - black powder coated.


CONTROLLER(A),Entrance door controller - extended with 5 position settings.

490-015aDOOR CONTROLLER

HANDLE(B),Entrance door control handle - non-removable.


GLAZING(S),Entrance door glass - full length single piece, 72% green.

491-001 EXIT DOOR DRIVE SYS (B),Exit door drive system - Pneumatic

491-005 EXIT DOOR (B),Exit door - medium Ameriview Vapor Slide Glide, 34.8" between panels.

491-005aSLIDE GLIDE EXIT LIMIT

SWITCH(A),Exit door limit switch - solid state proximity switch.

491-005b EXIT DOOR CONTROL(A),Exit door control - Vapor Class Acoustic Sensing System. Activates door opening and detects obstruction

on closing.

491-005baCLASS SYSTEM DOOR

DECAL(A),Class system door decal - English and Spanish, text and characters as per customer requirement.

491-005dEXIT DOOR SENSITIVE

EDGE(B),Exit door sensitive edge - sensor on the vertical edge provided with all exit doors.

491-005daCLASS POWER SWITCH

LOCATION(B),Class power switch location - at exit door baseplate.

491-005gEXIT FRANGIBLE COVER

SECUREMENT(B),Exit frangible cover securement - magnetic latch.

491-005jEXIT BASEPLATE / ELEC

PNL ACCESS(B),Exit baseplate access- at each exit door, Tcb set-up, through removable ad frame.

491-006EXIT DOOR ASSIST

HANDLES(A),Exit door assists - black powdercoated.

491-020EXIT DOOR GREEN

LIGHT(B),Exit door green light - LED green light indicates that the exit door is set to open.

491-030 EXIT DOOR ALARM (A),Exit door alarm - sounds bell above the exit door when the class sensor is triggered.

491-035 EXIT DOOR GLASS SIZE (A),Exit door glass size - 2/3 top, 1/3 bottom.

491-035a EXIT DOOR GLAZING (B),Exit door glazing - 6 mm.


35


526-001a35' PASSENGER SEAT

QUANTITY(A),35' passenger seat quantity - 32.

526-005PASSENGER SEAT MANUFACTURER

(A),Passenger seat manufacturer - 4ONE.

526-005a4ONE PASSENGER

SEATS(A),4ONE passenger seats - Aries 4MA SST seats. Details as per customer spec.

526-005aa 4ONE D90 SPEC (B),4ONE passenger seat D90 spec - not required.

526-005d REAR BENCH SEAT (S),Rear bench seat - 1-3-1 hinged seat.

526-005ePASSENGER SEAT

MOUNTING(B),Passenger seat mounting - cantilever.

526-005fSEAT MOUNTED

GRABRAIL(A),Seat mounted grabrails - stainless steel.

526-005hFIRST SEAT,CURBSIDE

UPPER REAR(B),First seat at curbside upper rear - forward facing.

526-005haFIRST

SEAT,STREETSIDE UPPER REAR

(B),First seat at streetside upper rear - forward facing.

526-005iPASSENGER SEATING

BARRIER(B),Passenger seating barrier - pedestal mounted barrier.

526-005jSEAT

POSITION,FORWARD OF REAR EXIT

(B),Seat position, forward of rear exit - forward facing.

526-006DRIVER'S SEAT

MANUFACTURER(B),Driver's seat manufacturer - Recaro.

526-006bRECARO DRIVER'S

SEAT MODEL(B),Recaro driver's seat - Ergo AM80. The fore / aft seat travel is 9.25".

526-006f DRIVER'S SEAT COVER (A),Driver's seat cover - all fabric.

526-006g DRIVER'S SEAT BELT (C),Driver's seat belt- Orange lap and shoulder belt, with retractor on left hand side.

526-006gaDRIVER'S SEAT BELT

ALARM(C), Driver's seat belt alarm - required to warn driver that seat belt is not connected. Indicator light on dash only.

526-006gbDRIVER'S SEAT BELT

COLOR(A),Driver's seat belt color - Orange.

526-006jDRIVER'S SEAT,DOCKET

90 SPEC(B),Driver's seat D90 spec - Not required.

526-006kDRIVER'S SEAT BASE

RISER(B),Driver's seat base (riser) - black powdercoated steel.

526-006sDRVR'S SEAT

HEADREST(B),Driver's seat headrest - required.

526-007WHEELCHAIR

POSITIONS,QUANTITY(B),Wheelchair positions - two. At basic locations, one aft of the curbside and one aft of the streetside front

wheelhouses.

526-007aW/CHAIR

POSITIONS,RESTRAINT SYSTEM

(B),Wheelchair restraint system - restraint system for forward facing wheelchair position(s). Manufacturer, position, material color / type and details as per customer spec.

526-007eSHOULDER

HARNESS,W/CHR RESTRAINTS

(A),Shoulder harness for wheelchair restraints - one restraint bar with height adjustable shoulder harness on curbside and one non-height adjustable shoulder harness secured to structure (pier panel) on streetside.

526-010STANCHION / GRABRAIL

STYLE(B),Stanchion / grabrail style - curved style vertical stanchions. Using cast SST fittings for vertical and

horizontal stanchions.

526-010aOVERHEAD

HORIZONTAL GRABRAILS

(B),Overhead horizontal grabrails - SST.

526-010aaOVERHEAD GRABRAIL HANDHOLD STRAPS

(A),Handhold straps on overhead grabrails - yellow PVC straps, loose on horizontal stanchions, locations as per customer spec.

526-010abOVERHEAD GRABRAIL

HANDHOLD STRAPS,QUANTITY

(A),Overhead grabrail handhold straps, quantity - six.

526-010bCOLOR - STANCHIONS AT EXITS & RR RISER

STEP(A),Color - stanchions at exits and rear riser steps - SST.


36


526-010dVERT FORE OF S/S FRT

W/HOUSE(B),Vertical stanchion fore of streetside front wheelhouse - black SST.

526-010daVERT AFT OF S/S FRT

W/HOUSE(B),Vertical stanchion aft of streetside front wheelhouse - to match colour of vertical seat stanchions (see option

526-010f).

526-010eVERT FORE OF C/S FRT

W/HOUSE(B),Vertical stanchion fore of curbside front wheelhouse - yellow SST.

526-010eaVERT AFT OF C/S FRT

W/HOUSE(B),Vertical stanchion aft of curbside front wheelhouse - to match colour of vertical seat stanchions (see option

526-010f).

526-010fCOLOR - VERTICAL

STANCHIONS AT SEATS(B),Color - vertical stanchions at seats - SST.

526-010kFRONT CURBSIDE LUGGAGE RACK

(B),Front curbside luggage rack - horizontal SST tube wraps around aft, aisle and fore sides.

526-010m FAREBOX GRABRAIL (A),Farebox wrap-around stanchion - black SST. Requires known farebox location.

526-015C/SIDE MODESTY

PNL,FORE UPR DECK(C), Curbside modesty panel, fore of upper deck - .189" thick panel

526-015aMODESTY PANEL

MELAMINE(C), Fore of upper deck melamine modesty panels - Leathergrain finish aluminum panels.

526-015bC/SIDE FORE UPR DECK

MOD PNL, GAP(S),Gap at bottom of curbside fore of upper deck modesty panels - approximately 2" diagonally.

526-016BARRIER AT STREET

SIDE REAR RISER(B),Barrier at street side rear riser - Modesty panel (material and color per 526-015/526-015a).

526-035BARRIER FWD OF

EXIT(S)(B),Barrier fwd of exit(s) - upper panel, 0.5" clear polycarbonate, basic width.

526-055EMERGENCY

INSTRUCTIONS(A),Emergency instruction - English / Spanish.

549-001a NON-60' HVAC SYSTEM (B),HVAC system manufacturer and type - Thermo King T15 rear A/C.

549-002aHVAC UNIT MOTOR

TYPE(S),HVAC motor type - brushless motor for primary heating & cooling system.

549-002b REFRIGERANT (A),Refrigerant - R-407C freon.

549-002d HVAC AIR INTAKE (B),HVAC air intake - recirculated air only.

549-002eHVAC RETURN AIR

FILTER(B),HVAC return air filter - polyester (disposable) filter installed at the return air grille of the T15 unit.

549-002g HVAC SYSTEM VALVES (S),HVAC system valves - brass ball valves with basic handles.

549-002hA/C AND HEATER LINE

CLAMPS(S),A/C and heater line clamps - Ideal.

549-003 A/C COMPRESSOR (B),A/C compressor - Thermo King X430.

549-003abA/C COMPRESSOR

HOSE(B),A/C Compressor hose - Duraflex convoluted stainless steel, braided.

549-004 HVAC ELECTRONICS(B),HVAC electronics - Thermo King Intelligaire 3, valid for A/C or heater units. With limited diagnostic

capabilities.

549-004aHVAC CONTROL

PANELS(B),HVAC control panel - Thermo King, installed at the HVAC unit.

549-004bHVAC PROGRAM

SETTINGS(B),HVAC program settings - APTA standard

549-004dA/C PRESSURE

READINGS(B),A/C pressure readings - obtained via the Thermo King Intelligaire 3 control panel.

549-005q HVAC BOOSTER FAN (B),HVAC booster fan - MCC overhead fan with brushless motor. For non-60' CNG coaches.

549-020 BOOSTER PUMP (B),Booster pump - Valeo SPump 260 CAN.

549-025 DEFROSTER (B),Defroster - 3 speed brushless motor, electrically controlled damper.

549-100 AUXILIARY HEATER (A),Auxiliary heater - not required.

580-005FRONT WHEELCHAIR

RAMP(B),Front wheelchair ramp - NFIL ramp at front door. 32" wide, with 1:7 slope.


37


580-005a FRONT RAMP CONTROL (B),Front ramp control - ramp switch at driver's instrument panel.

580-005dWHEELCHAIR

RAMP,SURFACE(B),Wheelchair ramp surfaces - covered with Full Metal Jacket anti-skid treatment. The leading edge is yellow

FMJ, the side flanges are painted yellow.

580-030WHEELCHAIR RAMP

COUNTER(A),Wheelchair ramp counter - required.

600-025 BACK-UP ALARM (B),Backup alarm - basic alarm located on curbside.

600-026FRONT ELECT,TOW

RECEPTACLE(A),Front electric towing receptacle - Cole Hersee.

600-027 GROUND STRAP(A),Ground straps - two straps, one located at the front and the second at the rear of coach. Note: for 60's,

second strap is at the rear of the rear coach.

600-050INTERIOR

FAN(S),MANUFACTURER(A),Interior fan(s), manufacturer - Bergstrom, 12 volt.

600-050aDASH FANS,QTY AND

LOCATION(A),Dash fan(s), quantity and location - one at right of center.

600-052FAN UNDER FRT DEST

SIGN COMPT(A),Fan mtg under frt dest sign compt - at approx. 41.25" to the left of center, controlled by switch at side

console.

600-065 SDS TRAY QUANTITY (A),SDS tray quantity - three trays total.

600-075 FAREBOX PEDESTAL (C),Farebox pedestal - carbon steel, 6" high.

600-076 FAREBOX (A),Farebox - GFI Odyssey (details as per customer spec).

600-076a FAREBOX,SUPPLIED BY (A),Farebox source of supply - supplied and installed by customer.

600-076bFAREBOX POSITION /

HOLES(A),Farebox position / connector holes - provided, only for power and ground.

600-076eFAREBOX GROUND

STRAP(A),Farebox groundstrap - required.

600-100CURBSIDE FRONT EQUIPMENT BOX

(A),Curbside front equipment box - black, aluminum with paddle latch, no lock.

600-101DRIVER'S STORAGE BOX BEHIND SEAT

(A),Driver's storage box behind seat - basic box with paddle latch, no key. The box is to include a chamfer to allow for driver's seat clearance.

600-126REGISTR/MAINT

HOLDER(A),Registration or Maintenance holder - required (registration or regulation or legal notice), details and location

as per customer spec.

600-175RADIO,COMMUNICATIO

N SYSTEM(A),Radio, communication system - provisions for system. Installation of antenna (s), cabling and ground plates,

as per customer spec.

600-225VIDEO SURVEILLANCE

SYSTEM(A),Video surveillance system - interior and exterior cameras, quantity, details and location as per customer

spec and installation / approval drawing.

600-225aVIDEO SURVEILLANCE

SYSTEM,MFR(A),Video surveillance system - Apollo system, equipment as per customer spec.

600-225b CAMERA COLOUR TYPE (A),Camera colour type - all cameras are colour as per customer spec and installation / approval drawing.

600-276aFIRE SUPPRESSION

CNG(A),Fire suppression - Kidde dual Spectrum Modular system.

600-276abFIRE SUPPRESSION BOTTLE LOCATION

(B),Fire suppression bottle location - SS behind light panels.

600-276dDUAL SP FIRE

DETECT.SENSORS(C), Dual Spectrum fire detection sensors - Four infrared sensors in engine compartment.

600-276daFIRE SUPPRESSION

BOTTLE, KIDDE(B), Kidde Dual Spectrum system - agent tank Without pressure switch.

600-277METHANE DETECTION,

CNG(A),Methane detection - Kidde dual Spectrum methane detection system (modular).

600-277aMETHANE DETECTOR

LOCATION(B),Methane detector locations - two detectors on the roof, one in the engine compartment, and one in the A/C

compartment.

600-277bMETHANE DETECTION

ENG SHUTDOWN FUNCTIONALITY

(B),Methane detection engine shutdown functionality - required.

600-300BICYCLE

RACK,MFR/MODEL(A),Bicycle rack, manufacturer / model - Sportworks, Trilogy, front mounted.


38


600-300aSPORTWORKS BICYCLE

RACK MOUNTING(A),Sportworks bicycle rack mounting - bolted slide-in standoff with bolted pivot.

600-300bSPORTWORKS BICYCLE

RACK REMOVAL(A),Sportworks bicycle rack removal - bolted rack.

600-300dSPORTWORKS BICYCLE

RK MATL/COLOR(A),Sportworks bicycle rack material/colour - SST, satin anti glare finish.

600-300eBIKE RACK DEPLOY INDICATOR LIGHT

(A),Bike rack deployment indicator light - required.

600-300fBICYCLE RACK MFR

LOGO(A),Bicycle rack manufacturer logo - not required.

600-300gBICYCLE RACK INSTRUCTIONS

(A),Bicycle rack instructions - English / Spanish.


39


Section #6A – Seating Layout

New Flyer Response:

Please refer to the attached seating layout for the proposed bus price.

40

G

G

B B

SECTION B-B(STREET SIDE)

AA

SECTION A-A(CURB SIDE)

CURB SIDE

STREET SIDE

1 2 34

5

6

7

8

9

101112

KIT201

KIT202

KIT203

KIT204

KIT206

REF28.75

97.48

FROM FACE OF DECK TOFORWARD MOUNTING POINT

118.81

MEDIUMEXITDOOR(REF)

FROM FACE OF REAR DECKTO FORWARD MOUNTING POINT

140.34

60.33

REF1.54

REF11.29

REF1.88

200

FRONTOF

COACH

FRONTOF

COACH

SEE NOTES2, 9 & 15

SEE NOTE 4

F

F

H

H

82.96

48.56

DESIGN REFERENCE NOTES:

- 4ONE ARIES SEATS WITH CANTILEVER MOUNTING- STAINLESS STEEL GRABRAILS- VPRO ADA RESTRAINT SYSTEM WITH Q'STRAINT DELUXE J-HOOK AND NON-REMOTE RELEASE SST BARR W/ PASSENGER TOUCH PAD ON LONGITUDINAL FLIP UP SEATS

- FOR 35' XCELSIOR- NO FLOOR HEATERS- DIESEL, DIESEL ELECTRIC, CNG- NON WARM WALL- MEDIUM EXIT DOOR

KIT207

KIT208

200120

SEE NOTES7, 15 & 19

24.75

REF10.07

REF4.15

KIT212

139.31

KIT209

KIT210

REF2.91 1 EA 200 568181 KIT-SEATING L/D ARIES -

1 EA 147 34S98012 SCREW TPG 8-32X.75LG N/A1 EA 146 8112307 BUMPER-RUBBER -

0.010 EA 120 081034 LOCTITE-243 MEDIUM 10ML -4 EA 89 296055 WASHER-SPACER 3/4 OD X .40 ID .02 LB2 EA 88 070926 SPACER-RESTRAINT BAR 0.32 LBS1 EA 87 40N07000 NUT LOCK 7/16-14 -2 EA 86 10W07000 WASHER FLAT 7/16 -1 EA 85 10B07040 BOLT-HEX 7/16 UNC X 2.50 -4 EA 84 050798 INSERT-1/4-20UNC STL -4 EA 83 10W04000 WASHER FLAT 1/4 -4 EA 82 10B04024 BOLT-HEX 1/4 UNC X 1.50 -1 EA 81 495634 ASSY-RESTRAINT BAR XCELSIOR 18.79 LBS

38 EA 79 356596 T-BOLT-SEAT MOUNTING 0.05 LBS8 EA 77 20B05024 BOLT HEX 5/16-18 X 1.50 -1 EA 53 34S00020 SCREW-NO 10-24 X 1.25 -1 EA 52 047330 BUMPER-RUBBER .75 DIA X 1.00 L -

20 EA 36 20B06032 BOLT-HEX SST 3/8UNC 2.00 -8 EA 33 50W05000 WASHER FLAT SS 5/16 NOM -

38 EA 32 8410536 NUT-CRN 3/8UNC GR5 0.03 LBS96 EA 30 50W06000 WASHER FLAT SS 3/8 NOM -

QTY U/M ITEM PART NO. DESCRIPTION WEIGHT

13

NNREF

10.10

REF1.22

KIT211

REF1.50

115.04

KIT205

T

T

E

E

M

M

120

120

120 KIT211

SEE NOTES2, 9 & 15

SEE NOTES2, 9 & 15

1

568182

A

7

2

B

5

E

8

E

C

36

B

14

4

7

A

5

6

8

DRAWING N0

3

D

C

REPORT ALL ERRORSTO ENG. DEPT.

D

2

MATERIALNOT APPLICABLE

TITLE

568182

-

PART N0

WEIGHT

.X

.XX

.XXXHOLE DIA.BEND RADII.ANGLE TOL.

.12

.06

.03

.015

.031

SIMILAR TO

DDESCRIPTION

-

TREATMENT

TMPLT-SEATING L/D ARIES

DEC.IN.

ECO

DIMENSIONS IN [ ]ARE IN m.m.

REV430920

UNSPEC'D TOLS.

(NX)

SCALE

THD ANGLE-

NOT REQUIRED

DO NOT SCALE DRAWING

NOTE: FOR INSTALLATION DRAWINGS PLEASE REFER TO ATTACHED MRP BOM SHEET FOR PARTS LISTINGTHE INFORMATION CONTAINED IN THIS DRAWING IS PROPRIETARY TONEW FLYER INDUSTRIES CANADA ULC OR ITS AFFILIATES ("NEW FLYER").THIS DRAWING AND ALL MATERIAL DELIVERED WITH IT MUST BE RETURNEDUPON REQUEST, AND SHALL NOT BE DISCLOSED TO THIRD PARTIESWITHOUT THE PRIOR WRITTEN CONSENT OF NEW FLYER. ONE OR MOREPATENTS MAY BE PENDING FOR THE PRODUCTS DEPICTED HEREIN. (C) NEW FLYER INDUSTRIES CANADA ULC. ALL RIGHTS RESERVED.2018

09-FEB-18

SOPHIA RAHN

DRAWN BY

DATE (DD-MMM-YY)

ADDITIONAL INFORMATION CAN BE OBTAINED BY REFERENCING THREE DIMENSIONALDESIGN DATA. CONTACT YOUR NEW FLYER REPRESENTATIVE AS REQUIRED.

1:20

D ADDED DRIVEN VERTICAL DIM TO ITEM 81 IN SECTION VIEW C ECN-100446

SHEET 1 OF 3

41

NOTES (WHERE APPLICABLE):

1. DRILL AND TAP FOR 3/8-16 HARDWARE.

2. DRILL .281 DIA HOLE.

3. DRILL .406 DIA HOLE THRU WHEEL ARCH.

4. DRILL .358 DIA HOLE.

5. DRILL .531 DIA HOLE. TRIM AWAY FLOORING SO THAT THE INSERT CAN SIT FLUSH WITH THE STRUCTURE OF THE REAR SHELF.

7. TRIM STANCHION TO FIT. ENSURE THAT STANCHION IS NOT CUT TOO SHORT & THAT IT FITS TIGHTLY IN THE TEE CLAMPS.

8. REFER TO SEAT VENDOR DRAWINGS FOR MORE DETAILS WITH REGARDS TO INSTALLING SEATS AND RESTRAINTS

9. KIT 520993 IS A TEMPLATE. REFER TO ORACLE BOM FOR CONTRACT SPECIFICATIONS.

10. SALES TO SEND SEAT SPECIFICATION DRAWING 265402-XXXX TO CUSTOMER, WHERE XXXX IS THE CONTRACT SR NUMBER.

11. ALL H/K DIMENSIONS HAVE .50 TOLERANCE, WHERE H/K = HIP TO KNEE.

12. TORQUE HARDWARE TO 30-35 FT-LBS (TORQUE FOR GRADE 8 BOLT-WET).

13. SPLIT BALLOONS SUCH AS REFER TO ITEM XXX IN KIT ITEM 200. ALL SPLIT BALLOONS ARE REFERENCED ITEMS.

14. TORQUE HARDWARE TO 5-7 FT-LBS.

15. TORQUE HARDWARE TO 22 FT-LBS.

16. TORQUE HARDWARE TO 12 FT-LBS.

17. DRILL .390 DIA HOLE THRU.

18. SLIDE ALL SEAT RAIL T-BOLTS (ITEM 79) FOR BOTH STREET SIDE AND CURB SIDE SEATS INTO SEAT RAIL BEFORE INSTALLING ANY SEATS.

20. DRILL 0.50 DIA THRU HOLE USING STANCHION CUP AS A TEMPLATE.

1 EA 200 520993 KIT-SEATING U/D ARIES -1 EA 123 510604 SPEC-4ONE SEAT TORQUE VALUE -

10.0 ML 121 242702 ADHESIVE-SIKA 221 WHITE -0.01 EA 120 081034 LOCTITE-243 MEDIUM 10ML -

4 EA 80 050294 INSERT-10-32 X .585 -34 EA 79 356596 T-BOLT-SEAT MOUNTING 0.05 LBS

4 EA 47 15S00012 SCREW-MACH 10-32X.75 LG4 EA 45 50W00000 WASHER FLAT SS 107 EA 44 34S04016 SCREW-1/4-20 X 1.0 -7 EA 43 50W04000 WASHER-FLAT 1/4 NOM -8 EA 41 14S05016 SCREW 5/16 X 1.00 SS -8 EA 40 34S05016 SCREW-5/16-18X1.0 S/TAP -8 EA 39 083651 INSERT 5/16-18 STEEL -4 EA 37 20B06032 BOLT-HEX SST 3/8UNC 2.00 -

10 EA 36 20B06020 BOLT SS 3/8 X 1.25 L -10 EA 35 50N06000 NUT SST 3/8 UNC -16 EA 33 50W05000 WASHER FLAT SS 5/16 NOM -34 EA 32 8410536 NUT-CRN 3/8UNC GR5 0.03 LBS92 EA 30 50W06000 WASHER FLAT SS 3/8 NOM -

QTY U/M ITEM PART NO. DESCRIPTION WEIGHT

1

2

3

4

56

7 8

9

10

11

12

13

14

15

16

17

18

19

AA

SECTION A-A(CURB SIDE)

B B

SECTION B-B(STREET SIDE)

KIT201

KIT202

KIT203

KIT204

KIT205

KIT206

KIT206

KIT207

KIT208

KIT209

KIT209

KIT209

KIT209

FROM REARFACE OFMODESTY

PANEL

10.56

27.80

10.31

FROM FACE OFBENCH TO FWD

MOUNTING POINT

24.64

15.26

12.2227.8010.31

FROM FACE OFBENCH TO FWD

MOUNTING POINT,TYP FOR RH

77.21

15.25

38.16

SEE NOTES7, 14, 20

& 25

SEE NOTES7, 14, 20

& 25

SEE NOTES7, 14, 20

& 25

SEE NOTES7, 14, 20

& 25

DESIGN REFERENCE NOTES:

- 4ONE ARIES SEATS WITH CANTILEVER MOUNTING EXCEPT FOR 2P TRANS AND 1P LONG WHEELHOUSE AND REAR CROSS SEATS- STAINLESS STEEL GRABRAILS

- FOR ALL XCELSIOR COACHES- DIESEL, DIESEL ELECTRIC, CNG- NON WARM WALL- VALID WITH OR WITHOUT REAR WINDOW

E

E

F

F

G G

H

H

J

J

SEE NOTE 9

FORWARDT-BOLT ACCESS

LOCATIONS (REF)

REAR T-BOLT ACCESSLOCATIONS (REF)

REAR T-BOLTACCESS LOCATIONS

(REF)

FORWARDT-BOLT ACCESS

LOCATIONS (REF)

VIEW K

REF4.30

KIT210 200

REF

KITXXX

24.62

1

520991

A

7

2

B

5

E

8

E

C

36

B

14

4

7

A

5

6

8

DRAWING N0

3

D

C

REPORT ALL ERRORSTO ENG. DEPT.

D

2

MATERIALN/A

TITLE

520991

PART N0

WEIGHT

.X

.XX

.XXXHOLE DIA.BEND RADII.ANGLE TOL.

.12

.06

.03

.015

.031

SIMILAR TO

DDESCRIPTION

TREATMENT

TMPLT-SEATING U/D ARIES

DEC.IN.

ECO

DIMENSIONS IN [ ]ARE IN m.m.

REV469937

UNSPEC'D TOLS.

(NX)

SCALE

THD ANGLEN/A

N/A

DO NOT SCALE DRAWING

NOTE: FOR INSTALLATION DRAWINGS PLEASE REFER TO ATTACHED MRP BOM SHEET FOR PARTS LISTINGTHE INFORMATION CONTAINED IN THIS DRAWING IS PROPRIETARY TONEW FLYER INDUSTRIES CANADA ULC OR ITS AFFILIATES ("NEW FLYER").THIS DRAWING AND ALL MATERIAL DELIVERED WITH IT MUST BE RETURNEDUPON REQUEST, AND SHALL NOT BE DISCLOSED TO THIRD PARTIESWITHOUT THE PRIOR WRITTEN CONSENT OF NEW FLYER. ONE OR MOREPATENTS MAY BE PENDING FOR THE PRODUCTS DEPICTED HEREIN. (C) NEW FLYER INDUSTRIES CANADA ULC. ALL RIGHTS RESERVED.2014

26-NOV-14

YUN WEI

DRAWN BY

DATE (DD-MMM-YY)

1:20 SHEET 1 OF 3

E1) "FOR ALL XCELSIOR COACHES" WAS "FOR 40' XCELSIOR" (A4, SHT1).2) UPDATED NOTE NUMBERS IN SHEET 2 ONLY, NO BOM CHANGE. ECN-041096

42

MBTA CONTRACT# 18-01 MCI

AGREEMENT REGARDING PURCHASE OF TRANSIT VEHICLES.

THIS AGREEMENT is made and entered into on June 14, 2019 between and among Motor Coach Industries, Inc., with its principal place of business located at 200 East Oakton- Street, Des Plaines, Illinois, 60018 ("SELLER"), and MORONGO BASIN TRANSIT AUTHORITY ("MBTA"). SELLER and MBTA may be referred to herein individually as "Party" or collectively as "Parties."

RECITALS

WHEREAS, MBT A. by its Request for Proposals #18-01, duly advertised for written proposals to be submitted on or before 11 :00 a.m. on October 12, 2018 for the purchase of Heavy Duty Rear engine Transit, Commuter and Trolley Vehicles ("BUSES") on behalf of itself and the Joint Procurement Participants of the CalACT-MBTA Vehicle Purchasing Cooperative by the MBTA; and

WHEREAS, the MBTA's RFP is attached hereto as Exhibit "A", and is incorporated herein by reference as if set forth in full; and

WHEREAS, SELLER submitted a sealed proposal in response to MBTA's Notice Inviting Proposals; and

WHEREAS, after it was determined that SELLER was a successful responsive and responsible proposer; and

WHEREAS, SELLER's proposal in response to MBTA's Notice Inviting Proposals is attached hereto as Exhibit "B", and is incorporated herein by reference as if set forth in full; and

WHEREAS, the MBTA Board of Directors has authorized the staff via Resolution and board action to award contracts and accept SELLER'S proposal through agreement by and between SELLER and MBTA upon the terms and conditions set forth herein; and

WHEREAS, MBTA has fully complied with all federal, state, and local laws governing public procurement process for the purchase of the BUSES;

NOW, THEREFORE, incorporating the foregoing recitals herein, for and in consideration of the promises and of the mutual covenants and agreements herein contained, SELLER and MBTA hereby agree as follows:

1. CONTRACT DOCUMENTS. This Agreement, along with all Exhibits referenced herein, and including without limitation, all documents referenced in said Exhibits shall hereinafter be referred to as the "Contract Documents." In the

43 ATTACHMENT D

event of any conflict, the Contract Documents, including specifically RFP #18-01 and any addendums thereto, shall take priority in interpreting the respective rights and obligations of the Parties created by this Agreement. Any contract, agreement, or other document subsequently created by any Party in connection with a purchase order issued pursuant to this Agreement and which changes or otherwise modifies the terms and conditions set forth in the Contract Documents shall not be val id without the prior written approval of both of the Parties to this Agreement.

2. DESCRIPTION OF BUSES PURCHASED. SELLER hereby agrees that it shall sell the BUSES as more particularly described in RFP #18-01 (attached hereto as Exhibit "B") to any and all participants named in the RFP who desire to purchase such BUSES from SELLER. BUSES are to be vehicles with less than 4000 miles and that have never been previously registered.

3. CONTRACT PRICING. SELLER hereby agrees to sell such BUSES as more particularly described in RFP #18-01 (attached hereto as Exhibit "B") under the terms and conditions set forth in RFP #18-01 .

4. DELIVERY. SELLER shall deliver F.O.B. per terms and conditions of MBTA RFP #18-01 Section SP 7.4, 11 and 12 and as proposed.

5. PAYMENT BY COOPERATIVE PARTICIPANTS. SELLER shall collect payment from CalACT/MBTA participants within thirty (30) days after the delivery and acceptance of the BUSES by the participant, and a receipt of an invoice thereof, per RFP #18-01, Section SP 10.

6. NO ASSIGNMENT. Neither this Agreement, nor any interest in it, may be assigned or transferred by any Party without the prior written consent of all of the Parties to this Agreement.

7. NO ATTORNEYS' FEES. If litigation is required to enforce or interpret the provisions of this Agreement, neither SELLER nor the Cooperative shall be entitled to an award of attorneys' fees or costs, but shall be entitled to any other relief to which it may be entitled by law.

8. MODIFICATION. This Agreement may be modified only in a writing approved by the MBTA Board and signed by all Parties.

9. GOVERNING LAW. The laws of the State of California will govern the validity of this Agreement, its interpretation and performance. Any litigation arising in any way from this Agreement shall be brought in San Bernardino County, California.

10. NO WAIVER OF DEFAULT. The failure of any Party to enforce against another party any provision of this Agreement shall not constitute a waiver

44

of that party's right to enforce such a provision at a later time, and shall not serve to vary the terms of this Agreement.

11. FURTHER ASSURANCES. Each Party shall execute and deliver such papers, documents, and instruments, and perform such acts as are necessary or appropriate, to implement the terms of this Agreement and the intent of the parties to this Agreement.

12. BINDING EFFECT; CONTEXTj COUNTERPARTS. Subject to Paragraph 6, the rights and obligations of this Agreement shall inure to the benefit of, and be binding upon, the parties to the contract and their heirs, administrators, executors, personal representatives, successors and assigns. Whenever the context so requires, the masculine gender and includes the feminine and neuter, and the singular number includes the plural. This Agreement may be executed in any number of counterparts, each of which shall be considered as an original and be effective as such.

13. NON-INTEREST. No officer or employee of the MBT A shall hold any interest in this Agreement (California Government Code section 1090).

14. CORPORATE AUTHORITY. Each individual signing this Agreement on behalf of an entity represents and warrants that he or she is respectively, duly authorized to sign on behalf of the entity and to bind the entity fully to each and all of the obligations set forth in this Agreement.

15. INDEMNIFICATION. Indemnification will be as per the terms and conditions specified in RFP #18-01, GC 9.1.

16. WARRANTY. The BUSES are warranted by SELLER to be new and to be free from defects in material and workmanship pursuant to and in accordance with those certain manufacturer's warranties collectively attached hereto as Exhibit "B", and as submitted in response to RFP #18-01 by SELLER and incorporated herein by reference as if set forth in full. During said warranty periods, the BUSES shall maintain structural and functional integrity. The warranty is based on regular operation under operating conditions prevailing in the purchaser's operating area.

17. WARRANTY OF FITNESS. SELLER hereby warrants that the BUSES and all materials furnished shall meet the requirements and conditions of the Contract Documents and shall be fit for the purposes intended. Acceptance of this warranty and acceptance the BUSES and materials to be manufactured or assembled pursuant to the specifications in these Contract Documents shall not waive any warranty, either express or implied.

18. NOTICE. All notices relative to this Agreement shall be given in writing and shall be personally served or sent by certified or registered mail and be

45

effective upon depositing in the United States mail. The Parties shall be addressed as follows, or at any other address designated by proper notice:

19. CONTINGENCY. Contract validity is subject to successful completion of facility and pilot vehicle inspections.

MBTA:

SELLER:

Joe Meer Director of Cooperative Purchasing Programs Morongo Basin Transit Authority 62405 Verbena Road Joshua Tree, California 92252

Patrick Scully Executive Vice President Sales and Marketing Motor Coach Industries, Inc. 200 East Oakton Street, Des Plaines, Illinois, 60018

19. EXECUTION. This Agreement is effective upon execution by both Parties. It is the product of negotiation and all parties are equally responsible for authorship of this Agreement. Section 1654 of the California Civil Code shall not apply to the interpretation of this Agreement.

IN WITNESS WHEREOF, the Parties have executed this Agreement as of the date first above written.

Motor Coach Industries, Inc. Morongo Basin Transit Authority

46