6/8/20106/8/20106/8/20106/8/2010

BioFrac Introduction

BioFrac Technologies Group Oil & Gas Water Treatment Engineering

Aspen, Colorado

please use the space bar to advance show / left key to go back /right. key to go forward

Has formed a response effort to the Horizon Gulf Spill

Our new group effort shall be known as

R.E.S.P.O.N.D TECHNOLOGIES LP

President Barack Obama, “quoted”…all new technologies… must be incorporated to fight this spill, and I ask for all companies to come forward with new

technologies…..now

6/8/2010

The REPSOND group of global engineers and associated companies and equipment suppliers have worked around the clock since the HORIZON explosion and sinking.

At day 15, after our engineering was completed, we attempted to approach BP, without success…hundreds of hours have been spent calling equipment supply companies globally to formulate our proposed offshore barge processing operation….

On day 20, our presentation was sent to the White House staff…we heard nothing back….

On day 25, our proposal was sent to the following agencies listed below and to date, we have not been contacted by no one…..? All we asked for …was to allow us to present our presentation….

President Barack Obama – & his White House staffSen. Ken Salazar –Secretary of the InteriorJanet Napolitano- Homeland Security DirectorLisa Jackson- EPA DirectorAdmiral Thad Allen- USCG BP- OLG group heading up the ground team in Louisiana / Mr. John LangGov. Bobby Jindal – Lo.Gov. Haley Barber – Miss.Gov. Bob Riley-Ala.Gov. Rick Perry-TexasMid-Coast Recovery- BP contracting clean up company (they did call us back…said thank you)Halliburton / MI-Swaco / Anadako / High Sierra Energy / numerous other oil companies…..(0ver 35)

We have repeatedly offered our services, equipment technology, and expertise in oil produced water treatment.

TO DATE…..no one seems to care enough, NOW, its time to take this private, and go to work

on our own….and R.E.S.P.O.N.D

6/8/20106/8/20106/8/20106/8/2010

RESPOND R.E.S.P.O.N.D

RESPOND Technologies On Site Mobile Barge Water Processing

R-Respond toE-EnvironmentalS-SpillsP-PromptlyO-On-SiteN-NearD-Disaster

6/8/20106/8/20106/8/20106/8/2010

Gulf Oil SpillThis picture clearly shows the extent of the density of the light oil being released in the Gulf Horizon spill. Oil concentration of 10,000 PPM to well over 50,000 PPM are laying at the surfaces. Recent documentation of sub surfaces show dispersants being used are breaking down the heavy oil sludge into smaller droplet stage, which is floating below the surface, between thermo layers. Dive trips documented & showed extremely heavy contamination below 50 ft. to the surface. This information tells us, that aerations will be necessary in the skimming operations to bring the droplets to surface for collection. Oil collection for processing will be even more difficult.

Present skimming operations are working, yet ineffective, and sub surface oil will again rise to the surface over time. RESPOND will be capable of treating this skimmed oil onsite, process it, and release clean water back to the Gulf under 10 PPM Our recycling operations would greatly reduce the massive travel time from collection to the land based processing centers. RESPOND will be capable of treating the extreme heavy oil sludge, seen floating, with chopper pumps & hydrocyclones, then continuing it down line and breaking it down, super-coagulating oil into smaller droplet stage, and remove all oil contentwell below EPA standards. Our testing has shown end results of treatment below 10 PPM

RESPOND Technologies On Site Mobile Barge Water Processing

6/8/20106/8/2010

Over 50 Million Barrels of oil have been released so far, and with the indication that BP will not be able to stop the flow until late August, or September .

New estimates put the flow at 25-40,000 barrels per day, or 1.5 million gallons per day plus…..

In the next 60 days, if left uncapped, will release another 80 MILLION Barrels + into the Gulf of Mexico

Pictured here is what is floating to the surface, theseOil clumps are formed by natural motion and waves of the ocean, as microscopic materials collect on it.

What we don’t see is what is under this material.

BP has been spraying dispersants on to this material to break it apart, and to make it sink to deep water.

Once this is done, the oil floats in the thermo layers from 100 ft depth to the surface.

This oil will continue to rise over time, and is releasing benzene and toluene by products, which is the slicks that are reported ever where….

6/8/20106/8/20106/8/20106/8/2010

Sub-Surface Samplesfrom 35 ft depth

Dispersants presently being used by BP in the Gulf, to disperse oil content on the surface, has now been clearly shown and documented to break up the oil and send it deeper into the Gulf water. Recent dive trips documented by the University of Florida, have shown this oil to be from 100 ft to the surface. Without proper aeration technique's being incorporated in skimming operations, oil will continue to rise to the surface in time, thus making it almost impossible to collect . This oil will continue to rise over time, and without proper aeration bubbler’s being used, this oil will stay in the thermo layers of the Gulf water, and continue to contaminate fish and turtles, dolphins and aquatic life for years to come. The US-EPA has now directed BP to stop using these dispersants…..yet BP …is still dumping hundreds of thousands of gallon on the spill by airplanes daily….. This cleanup operation could very well last 10 years or more, we don’t have that kind of time…..

6/8/20106/8/2010

The EOH2O process is referred to by academic publications and various industrial journals as 'electrolytic oxidation', 'electro-catalytic precipitation' and 'hydroxyl radical generators'. All three are correct, though limiting in their explanation. Standard electrolytic oxidation processes are either voltage limited or current limited. Meaning that they may apply high levels of DC voltage at low current (amperage) output, or the opposite - applying high current to the wastewater at low voltages (normally where the water under treatment is highly conductive). The EOH2O process applies both - higher voltage with higher current - which is more effective, faster, and cost efficient. This allows the EOH2O process to be used on a much wider range of wastewater and freshwater types - from distilled water for calcium reduction - to swine manure for nitrogen and phosphate reduction. Because of the unique electrode material and spacing utilized by Aquatic Technologies , the EOH2O process is able to handle larger flow rates and total volumes (systems can operate at 5 to 300gpm per electrode) allowing smaller equipment space requirements while handling larger flow rates - such as those typical of municipal water systems.

RESPOND-AQT has engineered our offshore barge processing operation that incorporatesThe EOH2O separation technology to separate all (99.9%) hydrocarbon material related to the Gulf Spill. Our barge processing system will be capable of taking on existing skimming operations collected water and oil, and recycle and process 3-4 Million gallons per day. This will expedite cleanup operations 10 fold, and not only in the Gulf waters, but near shorelines and beaches.

TO DATE, THIS EQUIPMENT OR MOBILE RECYCLING-PROCESSING OPERATION HAS NEVER BEEN BUILT GLOBALLY. RESPOND TECHNOLOGIES AND AQUATIC TEHNOLOGIES JOINT EFFORT WILL BE THE FIRST SPILL CONTAINMENT SOLUTION EVER BUILT, AS DESIGNED, AND ITS TIME TO… R.E.S.P.O.N.D

EOH2O™ Electrolytic Oxidation System

6/8/20106/8/20106/8/20106/8/2010

Process Testing

Free and Dissolved oil in water from North Sea platform. No skimming or removal of super-coagulated oil was performed (see report for analysis of samples)

Left: Untreated Left Center: Following initial EOH2O super-coagulation Center: Supernatant (water below the super-coagulated oil at water surface)Right Center: Sample for analysis of dissolved aromaticsRight: Final sample for analysis of aromatic hydrocarbons Incoming Wastewater:

Post Treatment (Supernatant)THC (Total Hydrocarbons): 10,041 mg/l

4.87 mg/lAromatic Hydrocarbons : 1094 mg/l

0.83 mg/lpH: 7.19

7.57

Aquatic Technologies EOH2O TM Patented Separation Process

RESPOND –BFT corp. is soley licensed by Aquatic Technologies to incorporate the EOH2O separation technology in treating the

Gulf spill.

6/8/20106/8/20106/8/20106/8/2010

BioFrac Treatment Schematic

RESPOND-AQT Electrolytic Oxidation Treatment Processing Protocol (EOTP) will remove 99.5% of all Hydrocarbon material mixed with Salt Brine water. Overall treatment time is 15 Minutes or less, and is circulated between chambers at 2000 gpm or better, depending upon the density of the oil count 50,000 PPM + / can be reduced to under 10PPM, or well under USEPA & EU discharge standards.

RESPOND Offshore Processing Schematic

6/8/20106/8/20106/8/20106/8/2010

Statement of Facts The Horizon accident has dumped over 50 million barrels into the Gulf of Mexico to date. New efforts to stop the leak seem bleak. The “White House” is calling it the largest ecological disaster in American History…… New information released, state estimates in excess of 25-40,000 barrels + per day, that’s over a million gallons of oil per day gushing into the Gulf of Mexico…

To date, there is no such offshore processing equipment built , (Globally) such as RESPOND engineers have designed, engineered, and proposing to deploy into operation as soon as proper funding is secured. $30 Million dollars are being spent daily by BP

RESPOND requires $13 .5 Million 1st tier funding, and 75-90 days max. to deploy our equipment. We are ready to swing into action, and have the proper sources lined up to assemble the offshore processing operation immediately…parts & equipment fabrication companies will drop there present work to go into action for RESPOND, and have offered there help accordingly…. The response from our suppliers have been extraordinary..and all have committed to ship the necessary equipment immediately, or build it for us as soon as humanly possible….

Everyone is willing to help in this cause…..as it should be….

The RESPOND-AQT Processing Barge operation would be used for years to come in the effected Gulf area’s, with shoreline cleanup’s, inland harbor contamination, and possible seal off large scale area’s for treatment. Shorelines contaminated already, and the cleanup process could be expedited by washingThe oil back into the water, rather then hand cleanup…collect it with suction skimmers, pump it onboard the BFT barge, and direct discharge recycled clean water on site. this is the future in offshore oil spill treatment…and were ready to go into action….

RESPOND Technologies On Site Mobile Barge Water Processing

6/8/20106/8/2010

ba

http://www.chevron.com/stories/energy.story/allstories/agbami/To date, Chevron’s “Agbami” offshore processing barge is the only fully contained vessel operation globally. It took 10 years to built it, and hundreds of millions of dollars….

RESPOND-AQT proposed processing barge could be deployed within 90 days to the Gulf waters, and for less then $20 Million dollars, a simple..realistic…solution..that works

6/8/20106/8/20106/8/20106/8/2010

BioFrac Offshore Barge Processing Operations

BFT Offshore Barge Schematic: All processing equipment shall be mounted on a 250 Ft. X 75Ft. Ocean Barge capable of 18,000 BBLS oil storage under deck. ISO certified. This barge shall be located on site or near skimming operations. Rendering Not To Scale:

RESPOND Technologies Proposed Offshore Oil Separation Processing Barge Operations

BFT OFFSHORE BARGE LOGISTICS:A. PROPOSED BARGE: 275 ft X 75 ft x 12 ftB. PROCESSING CAPABILITY: 2-3 Million Gallons Per Day

/ 70,000 BBLS +C. PROCESSING QUALITY: 5000-50,000 PPM / TO / LESS THEN 10

PPMD. PROCESSING TIME: 15-30 Minute processing time frame:E. FLOW RATE: 2000 gallon per minute / 2800 BBLS

per hr. Rendering Not To Exact Scale

Barge Specs: 275 Ft X 75 Ft x 12 Ft.

6/8/20106/8/20106/8/20106/8/2010

EOH2O Electrolytic Oxidation Closed Tube System

RESPOND shall incorporate the patented EOH2O TM Separation Process technology invented by Aquatic Technologies LLC. McMinnville, Oregon (AQT) Pictured below are AQT Closed Chamber Electrolytic Oxidation Tube Offshore Platform System. 24” Diameter / 12’ Long / 320 Gallons each.

Four separate banks shall be incorporated concerning servicing under operation, thus allowing BFT to continuously operate without down time. Incoming fluid shall be circulated between tubes for proper processing time. Fluid continues to the EOH2O closed top tanks, which will continue fine sediment processing well below US-EPA & EU discharge standards .RESPOND shall be capable of realistically processing over 2,000,000 to 3,000,000 gallons per day, or 70,000 + barrels per day average, depending on actual density levels. Processing oil from 5,000PPM to 50,000PPM + / down to less then 10 PPM for direct discharge back to the Gulf of Mexico.USEPA Gulf discharge standards presently are 29 PPM or less. BFT can meet all USEPA & EU Standards to date. Proven in Testing

Aquatic Technologies EOH2O TM Electrolytic Oxidation Processing Tubes

6/8/20106/8/20106/8/20106/8/2010

EOH2O Open Weir Tanks

INTAKE FLOW

8”8”

8”

8”

12 Inch

FLO

W

EO

H2

O P

roc

ess

Ele

ctro

lytic

Ox

ida

tion

Cl

ose

d L

id T

ank

s

POS

ITIV

E AN

OD

E

NEG

ATI

VE C

ATH

ODE

O IL S K IM M E R

FLO

W

EO

H2

O P

roc

ess

Ele

ctro

lytic

Ox

ida

tion

Cl

ose

d L

id T

ank

s

POS

ITIV

E AN

OD

E

NEG

ATI

VE C

ATH

ODE

O IL S K IM M E R

FL

OW

EO

H2O

P

roce

ss

Ele

ctr

olyt

ic O

xid

atio

n

C

los

ed L

id

Tan

ks

POS

ITIV

E AN

ODE

NEG

ATIV

E C

ATH

ODE

OIL SKIMMER

FL

OW

EO

H2O

P

roce

ss

Ele

ctr

olyt

ic O

xid

atio

n

C

los

ed L

id

Tan

ks

POS

ITIV

E AN

ODE

NEG

ATIV

E C

ATH

ODE

OIL SKIMMER

FL

OW

EO

H2

O P

roc

ess

E

lect

roly

tic

Oxi

dati

on

C

lose

d L

id T

ank

s

PO

SITIV

E A

NOD

E

NE

GAT

IVE C

ATH

OD

E

O IL S K IM M E R

FL

OW

EO

H2

O P

roc

ess

E

lect

roly

tic

Oxi

dati

on

C

lose

d L

id T

ank

s

PO

SITIV

E A

NOD

E

NE

GAT

IVE C

ATH

OD

EO IL S K IM M E R

FLO

W

EO

H2O

P

roc

ess

E

lec

tro

lytic

Ox

ida

tion

C

los

ed

Lid

Tan

ks

POS

ITIV

E AN

ODE

NEG

ATIV

E C

ATH

ODE

OIL SKIMMER

FLO

W

EO

H2O

P

roc

ess

E

lec

tro

lytic

Ox

ida

tion

C

los

ed

Lid

Tan

ks

POS

ITIV

E AN

ODE

NEG

ATIV

E C

ATH

ODE

OIL SKIMMER

FLO

W

EO

H2

O P

roc

ess

El

ect

roly

tic O

xid

ati

on

Cl

ose

d L

id T

ank

s

POS

ITIV

E AN

OD

E

NEG

ATI

VE C

ATH

ODE

O IL S K IM M E R

FL

OW

EOH

2O

Pr

oce

ss

Ele

ctr

olyt

ic O

xid

atio

n

Clo

sed

Lid

Ta

nks

POS

ITIVE

AN

ODE

NEG

ATIV

E C

ATHO

DE

OIL SKIMMER

FL

OW

EOH

2O

Pr

oce

ss

Ele

ctr

olyt

ic O

xid

atio

n

Clo

sed

Lid

Ta

nks

POS

ITIVE

AN

ODE

NEG

ATIV

E C

ATHO

DE

OIL SKIMMER

FLO

W

EO

H2

O P

roc

ess

El

ect

roly

tic O

xid

ati

on

Cl

ose

d L

id T

ank

s

POS

ITIV

E AN

OD

E

NEG

ATI

VE C

ATH

ODE

O IL S K IM M E RPUM P

O il Sk immer O il Sk immer

PUM P

CAT 250KW POWER SUPPLY

CAT 250KW POWER SUPPLY

DIESEL

DIESELUNDER DECK OIL STORAGE 10,000 BBLS

UNDER DECK OIL STORAGE 10,000 BBLS

RESPOND-AQT – EOH2O Electrolytic Oxidation Tanks : 5000 Gallons Each ( 60,000 Gal. System )

Final De-Oiling System

6/8/20106/8/20106/8/20106/8/2010

New Water Separation Technology

Treatment of the oily water streams will produce various hazardous and/or noxious gases. These include chlorine gas; sulfur dioxide gas; hydrogen gas; oxygen gas; carbon monoxide and dioxide gas (CO and CO2); ammonia gas (NH3); and nitric oxide-nitrogen dioxide gas (NO and NO2). Most of these will be volumes under 1-10mg/l at any one time, and are well below normal release rates associated with platform flue gas burning or standard refinery gas eliminations. However, IMO (International Maritime Organization) and OSHA (Occupational Safety and Health Administration) require that that gases either be “scrubbed” or vented sufficiently above or beyond the barge to prevent any explosion or health related issues. For a barge – simply mixing of released gases from the oxidation treatment of the oil water with ambient air – and venting at a level 10-15’ above the deck height should be sufficient to remove any damage and “dilute” the various gas levels to be within the IMO and USEPA Clean Air regulations. Air to water scrubbers can be employed if required, but at present, especially during an emergency spill response – meeting Clean Air regulations is not a paramount issue for any other agencies involved in oversight.

ATEX/Explosion Issues Both IMO and U.S. Coast Guard regulations require that all equipment meet ATEX (Explosion proof) regulation. The equipment design and gas venting takes these regulations into account and all ATEX issues can be met, including ability of the treatment systems to prevent spills during rough seas (30-degree list and roll). The ATEX regulation includes the application of anti-static and corrosion resistant coatings on all piping, metal and poly-composite frame/support structures, equipment housing, electrical conduit, etc.

Free and Soluble Oil Reduction The oil from a spill undergoes transformation from interaction with the sea water as well as from the wave action and sunlight (UV). As seen in with the gulf disaster, after a few days, the volatiles in the oil (benzene and toluene) that make it viscous will dissipate – creating tar balls and asphaltene slag. Once the oil reaches this state, simple netting and scooping of the oil is the simplest process for removal from the water surface. This does not mean that the oil is not degrading and adding additional dissolved oil/hydrocarbons to the water once it reaches tar or asphaltene consistency – only that removal is simpler by conventional belting and netting processes. The residual dissolved hydrocarbons will still need to be removed via oxidation.

Initial EOH2O® Equipment Cost – Single 2-million gallon per day (mgpd) Treatment unit for Barge Placement 

(48) 24” diameter by 16” electrode tubes; (10) Open-glow Vented Electrode-Oxidative Tanks; DC power supplies, SCADA controllers and support equipment - $4.57million

Estimated Hydrocyclone cost for initial oil from water removal (1500gpm flow) - $450,000Estimated final Oil-Water Separator for capture of super-coagulated oil (1500gpm flow) -

$600,000 Licensing : Aquatic Technologies is prepared to license the application of it’s patent for Produced Water (Oil and Natural Gas) to BioFrac Technologies for a fee. Certain proprietary components would be supplied by Aquatic Technologies LLC, with royalties received for release of manufacture and fabrication of standard components (electrode chambers and oxidative tanks, etc). Design of deep water oil-to-surface equipment would be provided under an hourly rate or flat fee agreement, including release of patenting rights of the design.  

 

  

6/8/20106/8/20106/8/20106/8/2010

Hydro Cycloning / Chopper Pumps

The Cyclotech DEO1/30 B20 De-Oiling Hydrocyclone or simular systems shall be incorporated (whichever is available) to initiate heavy oil separations between EOH2O processing systems. Flow rates of 2000 GPM or 2,880,000 gallon per day (68,571 BBLS) This will greatly expedite processing time and allow BFT to process more water per hour in a steady stream …rather then batch treatment processing.Vaughan Chopper

PumpsVaughan chopper pumps will initially be used to separate intake chunk materials collected. These pumps service municipalSewage treatment plants, and are extremely effective.

6/8/2010

RESPOND proposes to incorporate collection devices shown, these air operated skimmers could be positioned on any shoreline or marsh area. Personal could use high pressure hoses supplied by the RESPOND barge to wash the oil residue off the land, to a boomed collection arena area,Were these type skimmers would collect the oil, which would be sucked up by the Respond Barge pumps for on site processing. High pressure water pumps, and air supply would be furnished by the barge which would be located close to the shorelines. (500-1000 feet)

REPSOND shall incorporate the LAMOR skimming systems by multiply suction lines from the barge. As many as four systems could be attached to each of 10 suction lines & barge pumps, and stretched our over a couple hundred yards… Ground personal would wash the oil from the shorelines and marshes to the suction lines and devices for collection. Local ground personal would keep the suction lines in place with smallRubber boats, or flat bottom vessels that are available….

Offshore skimming operations would incorporate multiple suction devices as shown. As existing skimming operation vessels would maneuver there collection operation to the rear of the RESPOND barge for collection and processing.

RESPOND would be capable of processing 2-3 Million gallons of contaminated water per day with this procedure adopted.

RESPOND proposes smaller process barges for on shore cleanup’s. After processing, clean water will be discharged on site, without having to transfer to another vessel for land processing. RESPOND testing has shown that we can recycle this oil laiden water well below US-EPA standard for direct discharge, thus expediting clean up efforts greatly…

6/8/2010

Pictured are additional small vesselCollection devices that would be usedFor inland areas contaminated.

Suction lines from the barge would be connected to these vessels for on siteprocessing

As pictured, this vessel and skimmerCost $450,000 each.

These type vessels can operate in very shallow water close to shore.

6/8/20106/8/20106/8/20106/8/2010

Operations Schematic

RESPOND Technologies On Site Mobile Barge Water Processing

6/8/20106/8/20106/8/20106/8/2010

BioFrac Management Team / Water Engineers

The RESPOND team consist of several top global water engineers & private consultants, who have over 100 years of combined field experience and testing various applications in water treatment, water separation technology, chemical treatment, RO processing equipment, & prototype RO Desalination equipment & manufacturing for Gas & Oil produced water treatment, and offshore oil platform water treatment.AQUATIC TECHNOLOGIES LLC : David Orlebeke / Founder & Patent Holder of the EOH2O TM Separation Technology. David has performed extensive testing for companies such as Shell, Exxon-Mobile,BP, PetroFac on site in Sweden and the North Sea area. David has proven his technology in actual demonstrations in the North Sea for BP directly, and the capability of his EOH2O separation process & equipment treating Oil barge bilge water well below EU standards for direct discharge, along with many other water treatments such as pre-RO separation treatment.Vern Tokarczyk / BFT-RESPOND / Aspen, Colorado / Sarasota, FloridaMember of the Aspen Institute Foundation “Think Tank”. Vern is the founder of the BioFrac Group, working in the Oil Fields in the Piceance Valley outside Rifle, CO. / from 2006 to 2010. With years of manufacturing experience, and equipment design engineering under his belt, set out to invent a working version of a mobile recycling operation for produced water / drilling operations after seeing the waste and disposal methods in Colorado. Vern has privately consulted with all the major water treatment equipment companies, such as Siemens, GE, Durco, Harmsco, Aqua-Tech, and international water treatment companies such as Doosan, Acciona Aqua, IDE Technologies, and the Delek Group . This team, facilitated by Vern, lead to Aquatic Technologies process. For the past year, we have worked together discussing all facets of water separation technology & treatment , specifically for oil & gas drilling applications. This has lead to the recent engineering on the Offshore Barge Project, that is presently being proposed today. We went into action the day after the sinking of the Horizon. We are extremely confident of the engineering behind the barge recycling operations, and will see this to completion by the middle of 2010, with proper capital investment behind us. This equipment is needed, and could be beneficial for all the future oil spill disasters…globally.,

6/8/20106/8/20106/8/20106/8/2010

Private Capital Investment / Summary

RESPOND TECHNOLOGIES is seeking major capital investment immediately, in quickly manufacturing and assembling the Offshore Barge Processing Operation. Projected time frames as of 5-26-10, indicates we could be fully operational within 75-90 days. All necessary equipment is standing ready for global shipping, and special manufacturing arrangements have been facilitated and standing by for our orders. We have worked around the clock engineering this project, and are 150% confident of the actual treatment operation. Understandable, this 0ffshore recycling operation has never been built by anyone to date, and will take a major team effort to assemble. Simple as is truly is, this is a engineering marvel, with many team players involved. It takes 6 months to a year to rough in a land based water treatment plant, we’ll be up and running and fully operational within 3 months, depending on equipment supply. Our equipment manufactures are world wide, from Japan to Switzerland, but the majority is all USA built, and mostly right out of Texas (Close to where we would assemble this project) All electrical components are on the shelf and waiting for the order to ship immediately overnight.

COMPANY DIRECTION: The BFT-RESPOND team is in the process of forming a new corporation (RESPOND Technologies) and will seek seasoned executive management immediately, and a solid Board of Directors, related to major oil companies. Our immediate attention is focused on the build, and not so much taking this project & company Public, we’ll let the professionals handle it…. Initial Stock of 30 Million Shares will be offered to start. Respectfully, we will ask for $.50 per share vs. 80% equity holdings of the new company. 20% will be held among the founders (2) with 2 seats on the Board of Directors. The initial $30 M investment capital will go toward all necessary equipment, barges, all offshore support equipment and leased vessels (sub-contracted). Operational Expenses, field personal wages, insurances, permits, and expedited ISO certificates concerning the operations, Legal, consulting, and technical advisors who have offered there services immediately.

R.E.S.P.O.N.D

6/8/20106/8/20106/8/20106/8/2010

BFT –RESPOND Offshore Operations Investment Projection:

1st Tier: $13.5 MBarge Lease or Purchase: $ 1.6 MEOH2O Processing Equipment:

$ 4.35 MBarge Support Equipment: Tanks-Pumps-SS/Plumbing-etc. $ 1.25 MEquipment Leasing (2 yr Min) Crane / Oil Transfer Vessels

$ 1.65 MAssembly Labor: In House & (Sub Contracted Labor) $ 850 KTravel / Shipping / Expedite Time of Build: $ 500 KLegal : Set Up /Permits / ISO Certificates / Insurances; $ 375 KManagement Salary : $ 500 KOperational Expenses: 90 days $ 1.9 M(Unforeseen Misc.) $ 500 K

Projected Budget:$13,475,000

2nd Tier; $150 M ( OTC Offering )2nd & 3rd Offshore Operations (Advanced Designs)Manufacturing / R &D / Testing / ExhibitionsAdditional Offshore Support VesselsOperational Expenses

6/8/20106/8/20106/8/20106/8/2010

PROJECTED PROFITABILITY:Offshore processing treatment will be broken into 4 categories;

a. Water Recycling & Processing:b. Oil Recovery:c. Vessel Oil Transportation to Land Processing Plant:d. Oil Processing & Resale (per barrel) (We Own the Oil Collected)

PROPOSED AVERAGE CHARGES:RECYCLING GULF WATER SPILL:a. Intake Oil Sludge: (water recycling & separation) $5.00 per barrel

Min. BFT will process 60,000 + barrels per day average =

$300,000 per day 30 Days of Operations Yield:

$9,000,000 per M 1st Yr: $108,000,000 per

Ye. Oil Recovery: ( Estimated @ 25,000 BBLS per day) $ 25 per

barrel recoveredf. Transportation to Land Cost: (Sub Contracted / Negotiated Shipping

Cost N/A)

Reservoir characteristics (such as pressure) and physical characteristics of the crude oil are important factors that affect the cost of producing oil. Because these characteristics vary substantially among different geographic locations, the cost of producing oil also varies substantially. In 2007, average “lifting” costs (all the costs associated with bringing a barrel of oil to the surface) reported to EIA by the major private oil companies participating in the Financial Reporting System (FRS)1 ranged from about $3.87 per barrel (excluding taxes) in Central and South America to about $10.00 per barrel in Canada. The average for the U.S. was $8.35 per barrel (an increase of 18.5 percent over the $7.05 per barrel cost in 2006). Besides the direct costs associated with removing the oil from the ground, substantial costs are incurred to explore for and develop oil fields (called “finding” costs), and these also vary substantially by region. Finding costs averaged over 2005, 2006, and 2007, ranged from about $4.77 per barrel in the Middle East to $49.54 per barrel for the U.S. offshore. While technological advances in finding and producing oil have made it possible to bring oil to the surface from more remote reservoirs at ever increasing depths, such as in the deepwater Gulf of Mexico, the total finding and lifting costs have increased sharply in recent years. Much of this recent increase is attributable to the rapid expansion of the world economy and is likely to reverse direction as the economic growth has slowed or declined in 2008/2009.

6/8/20106/8/20106/8/20106/8/2010

Company Statement The RESPOND Group has engineered a solid solution for the Gulf disaster….

and the next oil disaster…globally With 5 or more recycling operations stretched out over a 5-10 mile area, and with new booming technology development that were already working on, will be developed from the latest Horizon spill, were confident that we could very well contain such spills, before they get out of hand…as the BP Horizon has This time we could be ready…anywhere, anytime..globally…

We will seek cooperation with all investment opportunity , that is ready to move, tomorrow….and with a little insight, one must understand that profitability is not the question at this point & time….but being responsible.

We would care to extend our invitation to all corporations for proper capital investment…..with REPSOND-BFT & Aquatic Technologies, and develop and deploy this separation technology immediately to the Gulf of Mexico as soon as possible….this spill won’t clean itself up, we will…..with a lot of local people displaced out of work, we need there help…bi g time…

It took 15 years to clean up the Valdez spill….. The Horizon is 100 times bigger and growing daily

it’s time to R.E.S.P.O.N.D.

6/8/20106/8/20106/8/20106/8/2010

Contact Information We ask all concerning investment corporations to…….

Contact: Vern L Tokarczyk –CEO- Chief Engineer 1-941-536-5068Email: V.TOKARCZYK@BIOFRACTECHNOLOGIES.COM

R.E.S.P.O.N.D

Existing operations aren’t working fast enough to save the environment in the Gulf states, and shorelines as is, we may be late, but we have a solution to help…. It’s morally responsible for us to try….the best we can, its heartbreaking to see what is going on….its more heartbreaking to know we can help, and not being allowed to… We have to take a stand, BP may go bankrupt, but the USA will not….and will end up cleaning up this mess by our self’s…only time will tell the real story in the end….But if we do not respond….the Gulf of Mexico as we know it, may not survive this….

6/8/2010

…..this is not working….

It’s time to R.E.S.P.O.N.D