7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 1/12
Final ON-THE-JOBTRAINING REPORT Student Number: 2009-04089-MN-0
On the job training or OJT is one method by which students is
given a chance to apply the theories and computations that they
have learned from the school. It also helps the students to acquirerelevant knowledge and skills by performing in actual work
setting. Colleges and universities require their students to
undergo such training within a specific number of hours as part
of the curriculum.
2012
Sestoso, Adan Raymond D.
BS INTERIOR DESIGN
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 2/12
2 | P a g e
On the job training or OJT is one method by which students is given a chance to
apply the theories and computations that they have learned from the school. It also helps
the students to acquire relevant knowledge and skills by per forming in actual work
setting. Colleges and universities require their students to undergo such training within a
specific number of hours as part of the curriculum.
For the students, an OJT or internship program provides opportunities to go
through the actual methodologies of a specific job using the real tools, equipments and
documents. In effect, the workplace becomes a development venue for a student trainee
to learn more about his chosen field and practice what he has learn from academy.
On the other hand, an effective OJT program also benefits the companies who
accept trainees. First OJT or intern provides additional manpower for a lesser labor cost
than a regular employee. Most of them are all eager to learn the ropes so chances are high
that they will cooperate.
Employers can use this internship strategy as a method in recruiting new
employees. Since the trainer or the supervisor can follow the trainees’ progress, he can
gauge based on performance, behavior and attitude if the trainee will make a good recruit
after the completion of his internship.
INTRODUCTION
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 3/12
2 | P a g e
Accommodating on-the-job trainees can truly be beneficial not only to the
trainees but also to the companies that provide opportunities for this type of learning.
There is wisdom in the front lines. Such training can be an investment that will be
valuable to the company later on. This is also why trainees should take their internship
seriously as it can become a powerful tool and possibly even a source of recommendation
when they take that big lift from being students to career professionals.
In totality OJT Program is one of the most important experience that the student
need as part of the fulfillment of his/her studies. This experience helps student in
preparation to the real or actual work and It will provide knowledge and lessons that is
very helpful in there daily life.
Personal Data
Name: Sestoso, Adan Raymond D.
Address: Blk. 13 lot 2 Purok 6 Zone 8 Cupang, Antipolo City
Cell No. : 09087077204
Email Address: [email protected]
Nationality: Filipino
Civil Status: Single
PERSONAL PROFILE
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 4/12
2 | P a g e
Date of Birth: April 13, 1993
Religion: Roman Catholic
Father’s Name: Eulogio M. Sestoso
Mother’s Name: Amy D. Sestoso
Language: English / Filipino
Educational Background
COLLEGE LEVEL : Polytechnic University of the Philippines 2009- Present
BS Interior Design
SECONDARY LEVEL : Cupang National High School 2005-2009
OLOPSHOA Purok 2 Zone 8 Brgy. Cupang, Antipolo City, Rizal
PRIMARY LEVEL : Cupang Elementary School 2002-2005
Villa Corazon Subd., Brgy. Cupang, Antipolo City, Rizal
: SSS Village Elementary School 1999-2002
: Little Angel Play Center 1998-1999
MC DACANAY ARCHITECTURAL DESIGN OFFICE
ERFE & ASSOCIATES
Erfe & Associates is located in J & F Building II, Cainta,, Philippines. Company
is working in Architectural & Interior Design services.
ACMI WORKPLACE DESIGN CENTER
COMPANY BACKGROUND
COMPANY
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 5/12
2 | P a g e
With the expanding economy & influx of foreign investors during the new
millennium, the demand for fast, easy and fashionable office set up was
insatiable.WORKPLACE DESIGN CENTER & ACMI Office Systems Phils. Inc., was
born in the mid 2000, aiming to give the working environment a look to welcome the
21st century. Designing the workplace has always been our business.Custom made to fit
yourspecifications plus making sure designs are practical, functional and
fashionable.Chairs ranging from ergonomic to a plain simple stool, executive
tables,worktop/counter top, shelves & cabinets (steel or wooden) and partitions, you
name it we can have it for you, Toilet partition, Restaurants,Canteen table and
chairs.Harmony in the workplace is what we work to achieve.Our team of highly
competent professionals has extensive exposure in their fieldof expertise. This group of
designers and interior decorators are ever so efficient todeal with the smallest details of
each area in every layout to suit your demand.Our company believes that every product
leaving our store should have the guarantee of good quality.
VISION
To be identified as the carrier of world’s best-known quality officefurnishings &
known for being the most reliable in workplace environmentsetupMISSION
To be recognized as a contributor in the field of office space management
maintaining our standard of service and reliability outdoing all others in the same
industry.
COMMITMENT
Provide total client satisfaction through competent personnel and quality
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 6/12
2 | P a g e
LIST OF OFFICER
President: Richard Ngui
Vice President: Andrew Ngui
Secretary: Natalie Lim
Treasurer: Charity Ngui
General Manager: Catherina R. Luna
This chapter narrates the activities that the student trainees had gone through
during the training. This also includes the observation, participation, interaction and
challenges during their training.
NARRATIVE EXPERIENCE
M.C. DACANAY ARCHITECTURAL DESIGN OFFICE
April 02, 2012, it was the date when the trainee started the on the job training at
M.C. Dacanay Architectural Design Office. Archt. Manifelmo C. Dacanay was the owner
of this office since 25 years. It is an architectural services office situated at 8 Jones St.
Filinvest Cainta, Rizal.
The trainee was assigned at the second floor of DreamHomes Condominium
Project where the employer gives the trainee an opportunity to make and design a bulletin
ON-THE-JOB TRAININGACTIVITIES
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 7/12
2 | P a g e
board and an information board in sketch up. The mentor of the trainee helps by teaching
keyboard command on sketch up and simple techniques in how to make a bulletin board
and information board.
April 03, 2012, the trainee continued doing information center board for
DreamHomes Condominium project. After doing the information board on sketch up, the
trainee assigned to print PDF files and help in preparing of presentation drawings and
plates.
April 11, 2012, the trainee was appointed at Jestoni Alarcon Project where the
trainee assigned to make a shop drawing of powder room cabinet and master’s T&B
cabinet in AutoCAD, and detailed it properly.
April 12, 2012, the trainee was still working on detailing the shop drawing of
master’s T&B. After working on detailing the shop drawing, the trainee assigned to
encode in AutoCAD the front elevation of the kitchen area of Jestoni Alarcon Project.
April 16, 2012, the trainee attended on the Bible Study of the office, and then the
trainee continued working with his unfinished task. After the trainee finished it, he
assigned again at DreamHomes Condominium Project. By this time, he assigned to make
and design a shelving and door of the cabinet at the kitchen of the said project. Then after
that the trainee assigned to encode in AutoCAD the floor plan of girl’s bedroom, kitchen,
and family area.
April 17, 2012, the trainee assigned at Jestoni Alarcon Project and he assigned to
encode in AutoCAD the top view or plan of stairs, powder room and closet. After the
trainee finished it, he voluntary helps in the preparation of birthday celebration of his
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 8/12
2 | P a g e
employer. The mentor of the trainee assigned him to make a vicinity map of the venue of
the Birthday celebration of the trainee’s employer.
April 19, 2012, it was the day when the trainee finished his 50hrs OJT training in
MC Dacanay Office. The trainee assigned to encode in AutoCAD the sewer & drainage
layout and the lighting & power layout of CCT Palawan Commercial Center Project.
ERFE & ASSOCIATES
April 26, 2012, it was the date when the trainee started the on the job training at
ERFE & ASSOCIATES. Ma. Alicia B. Erfe, Arch., I.D. was the owner of this office. It is
an architectural & interior design services office situated at Room 204&206 J&F
Building II V.V. Soliven Ave., Cainta, Rizal.
The trainee started his (4) four days work as an assistant and a helper. He helped
in preparation of plates/ drawings for blueprinting; helped in preparation of swatches
board, scanning of contract documents & report papers, arranging the swatches library
and I.D. sourcing.
May 03, 2012, the trainee was assigned at 2nd floor study area of Lichauco
Residence Project where the trainee’s mentor assigned to encode the Family TV cabinet
in AutoCAD. On the following days, the trainee had already worked just like a regular
employee of the ERFE & ASSOCIATES.
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 9/12
2 | P a g e
May 11, 2012, it was the day when he appointed at Evaristo Unit Project where he
assigned to encode a plan and to make a 3D model/ perspective of TV cabinet at lining
room.
May 15, 2012, it was the day when the trainee finished his 100hrs OJT training in
ERFE & ASSOCIATES and it was also his second day on the site. On the site, the trainee
noticed that most furniture in the unit/ project site was made of wood. He also noticed
that the room was in modern/ contemporary style. The mentor of the trainee assigned him
to help in set- upping the main areas of the room for tenant occupancy. He also learned
how they install knock down furniture through observing them and he helped in cleaning
and sweeping the floor after the installation of furniture.
ACMI WORKPLACE DESIGN CENTER
May 17, 2012, it was the date when the trainee started the on the job training at
ACMI WORKPLACE DESIGN CENTER. It is a supplier of office furniture and a
furniture manufacturing company situated at 464 Audrich Building Lt. Artiaga, San Juan
City.
The trainee was assigned at AAW Inc. Project where the employer assigned to
make a 3D model or perspective of coffee table & display cabinet. It was very
challenging to the trainee because he is not already expert in AutoCAD 3D Model. Then
after he finished it, the trainee assigned to answer all phone calls that the company
receives.
May 18, 2012, the trainee assigned at Art B. Piano Project and he assigned to
make a perspective or 3D model of hanging cabinet, executive table, side table, office
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 10/12
2 | P a g e
tables, conference table, and freestanding table. It was very pressure to the trainee
because it was too many. After the trainee finished it, he helps his mentor in the
preparation of the Sales Report of their company.
May 21, 2012, the trainee assigned to make a 3D model or perspective of steel
cabinet/ locker and racks on AutoCAD. After the trainee finished it, his mentor gives him
a time to read magazines & books in their library.
May 22, 2012, because it is not a busy day the trainee gives time to use their
computer in social networking. After lunch the trainee assigned to make or design a
proposed counter for information area and render it on sketch up.
May 23, 2012, the trainee was appointed at GLC Project where his mentor gives
an opportunity to propose (3) three furniture layout for the 2nd floor of GLC’s office.
After he finished it, he assigned to input the purchase order of their clients in Microsoft
Excel.
May 24, 2012, At GLC Project, the trainee assigned again to design/ propose (2)
two reception counter in 3D mode. The trainee used sketch up in preparation of his
proposal. After doing his proposal, the trainee’s mentor assigned him to fax their
quotation notes in the clients.
May 25, 2012, it was the day when the trainee finished his 50hrs OJT training in
ACMI Workplace Design Center. The trainee’s last assignment was to make a plan or top
view of a reception counter that the trainee proposed. After he finished it, he assigned to
make and input a quotation notes on Microsoft Excel.
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 11/12
2 | P a g e
Being an apprentice on that kind of offices/ companies was really remarkable. All
the skills and techniques that they shared with the trainee will help him for his future
career.
OBSERVATION
The trainee who was training at different companies with the different field of
practice, observed the differences and their similarities. Another thing that the trainee
observed was the rules and regulation that the companies initiated. Before entering the
company, regular frisking and baggage inspections were conducted. Trainees are not
included as a visitor. Another was the NO smoking, sleeping and by standing rule.
Gadgets like mobile phones and portable mp3 players are not allowed during working
hours. Gadgets must be placed on the locker room/ pantry. Requests like emergency calls
are accepted making sure that the call was important and entertain able.
PARTICIPATION
The trainee participated in the normal operation of the company by maintaining
the cleanliness of the office. The trainee was participated in bible study of the office and
also in meetings and orientation.
The trainee also participated as a tool keeper on the office. Tools and materials
must be kept to avoid misplacing it. Tools must be clean before they were returned to the
drawers and tool box.
CHALLENGES
7/31/2019 Final Report Narrative Report - Adan Raymond
http://slidepdf.com/reader/full/final-report-narrative-report-adan-raymond 12/12
2 | P a g e
During the trainee’s on-the-job training, he met some challenges that push him to
work much better. First is when one of his co-workers challenged him to be greedy in
learning new things and skills. That is also the time when the trainee’s supervisor said
that if he later want high grade, he must work like a real employee. That was a big
challenge for the trainee. He was only a trainee, so the supervisor must supervise him and
not to let him handle a situation than he didn’t know. And because of that, the trainee
learned to put a dedication to his work. Lastly, one challenge that the trainee met was the
climate during his working hours on the field or in the office.