MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com
INSTRUCTION MANUAL
CMR7082/7084/7088 N/P 3.6/6
66-CMR708CSE
D/N ATR 700TVL IR CAMERA
CMR7082X3.6 N/P
D/N ATR 700TVL VARI-FOCAL IR CAMERA
IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence ofuninsulated "dangerous voltage" within the product's enclosurethat may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important operating andmain tenance (serv ic ing) ins t ruc t ions in the l i te ra ture
shock to persons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
CAUTION
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat
sources.
Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.
Do not cover cloth or to install this unit in poorly ventilated
places.
Do not continue to operate if there appears to be fault.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Sensitive electronics inside are vulnerable to excessive shock.
Excessive heat could damage this unit.
Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.
This may lead to overheating.
If the unit ceases to function, contact qualified service
personnel for help.
Risk of short circuit or electric shock.
Risk of fire or shock circuit.
CONGRATULATIONS
Thank you for purchasing this D/N ATR 700TVL (Vari-Focal)IR
Camera. You now own one of the many fine CCTV products we
manufactured. This product has been carefully inspected under
rigid quality control and should reach you in perfect condition.
With reasonable care, it will provide years of reliable performance.
We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I . Contact your dealer for
assistance.
DO NOT
NSTALL OR OPERATE THIS PRODUCT
WARRANTY INFORMATION
Please complete the following product purchase information. The
factory will requests this information when contacted for technical
support, or warranty repair. It is also valuable in case of loss or
theft.
Purchase Date
Serial Number
Model Number
TABLE OF CONTENTS
PART DESCRIPTION & DIMENSION
INSTALLATION
CONFIGURATION OF THE MENU
SETTING MENU AND FUNCTION
To Open and Exit the Menu screen
LENS
SHUTTER/AGC
WHITE BAL (White Balance)
BACKLIGHT (Backlight Compensation)
PICT ADJUST (Picture Adjust)
ATR (Adaptive Tone Reproduction)
PRIVACY
NR (Noise Reduction)
CAMERA ID
SYNC
LANGUAGE
CAMERA RESET
SPECIFICATIONS
1
2
7
9
9
9
10
12
14
15
16
16
17
18
19
19
19
20
1
TOP COVER
BOTTOM CHASSIS
BRACKET
PAN ADJUSTMENT SCREW
TILT ADJUSTMENT SCREW
WINDOW
VIDEO OUTPUT JACK (CMR7082)
DC POWER INPUT JACK (
)
DC12V 10%,
CMR7082
Unit: mm
154
101
72.5
6782
PART DESCRIPTION & DIMENSION
2
DC power input
Video output
INSTALLATION
FIG. 1 FIG. 2
1. CMR70821-1. Take out the camera from the inner box first. Plug the video cable and
power cable to video output jack and DC power input jack of the camera
(FIG.1). Then fix bracket to the wall(FIG.2).
1-2. Loosen the screws of top cover with screw driver(FIG.3).
FIG. 3
2. CMR7084/82-1. Take out the camera from the inner box first. Loosen the pan adjustment
screw with hexagon screw driver. Then, separated the bracket from the
camera body(FIG.4). Put the power cable and video cable through the
bracket and then fix it to the wall(FIG.5&FIG.6).
3
FIG. 4
FIG. 6FIG. 5
2-2. Open the top cover with screw driver(FIG.7).
FIG. 7
2-3. Next, Put the power cable and video cable through the bottom chassis and
rubble(FIG.8) and then fix the camera body on the bracket(FIG.9).
4
Video Output Video Cable
FIG. 9FIG. 8
2-4. Plug and fix the power cable to the terminal and plug the video cable to
vidoe output of the camera(FIG.10). Also for the security, please use the
adhesive tape to wrap the connection of video cable(FIG.11).
FIG. 11FIG. 10
Live
Earth
Neutral
NL
Note : When using two-cord
power cable, please
connect them to
"Live" and "Neutral".
3. Loosen the pan and tilt adjustment screw on the bracket to turn the camera body
to the desired angle and then tighten the screws(FIG.12).
4-1. USER OSD SETTING
Set t ing swi tches and Funct ions.
A. (UP)
B. (LEFT)
5
FIG. 12
4. First, adjust the lens on focus and zoom to form the optimal video image after
that tighten the screws(FIG.13). Then adjust the OSD menu to form the
optimal image. Please refer to page7~19.
: Press to move the cursor upwards or to se lect
i tems.
: Press to move the cursor to the le f t and to select
or ad just the parameters of the selected i tem.
The parameters changes each t ime th is but ton is
pressed.
FIG. 13
F
TW
ZOOMFOCUS
N
RIGHTLEFT
DOWN
UP
SET
6
FIG. 15
5. Replace the top cover and tighten the screws(FIG.14&FIG.15).
FIG. 14
C. (RIGHT)
D. (DOWN)
E. SET : Executes select ions and disp lays a submenu for an
i tem wi th the mark.
: Press to move the cursor to the r ight and
select or ad just the parameters of the selected
i tem. The parameters changes each t ime th is
but ton is pressed.
: Press to move the cursor downwards or to se lect
i tems.
CONFIGURATION OF THE MENU
SETUPMENU
LENS
SHUTTER/AGC
AUTO
AUTO
MANUAL
MANUAL
HIGH LUMINANCE
LOW LUMINANCE
MODE SHUT+AGCSHUTTER 1/60(1/50) 1/100(1/120) 1/250~1/10000/ /AGC 6.00 12.00 18.00 24.00 30.00 36.00 42.00 44.80/ / / / / / /
MODE
MODE AGC OFF/BRIGHTNESS(000~255)
BRIGHTNESS x0.25 x0.50 x0.75 x1.00/ / /
AUTO IRISSHUT+AUTO IRIS
MODE AUTO OPEN CLOSE/ /SPEED(000~255)
TYPE DC
WHITE BAL
ATR
PICT ADJUST
BACKLIGHT BLC HLC OFF/ /
ATW
OFF
MIRROR OFF/ ON
B-GAIN(000~255)
B-GAIN(000~255)
LUMINANCE LOW MID HIGH/ /
SPEED(000~255)
PUSH
ON
BRIGHTNESS(000~255)CONTRAST(000~255)SHARPNESS(000~255)HUE(000~255)GAIN(000~255)
R-GAIN(000~255)
R-GAIN(000~255)
CONTRAST LOW MIDLOW MID MIDHIGH HIGH/ / / /
DELAY CNT(000~255)
USER 1
USER 2
ANTI CRMANUAL LEVEL(000~255)PUSH LOCK
ATW FRAME x0.50 x1.00 x1.50 x2.00/ / /ENVIRONMENT INDOOR OUTDOOR/
7
PRIVACY OFFAREA SEL 1/8~8/8ONTOP [000~244(NTSC), 000~288(PAL)]BOTTOM [000~244(NTSC), 000~288(PAL)]LEFT [000~474(NTSC), 000~468(PAL)]RIGHT [000~474(NTSC), 000~468(PAL)]COLOR(1~8)TRANSP 0.00 0.50 0.75 1.00/ / /MOSAIC OFF ON/
NR NR MODE Y/C OFF/ Y/ C/Y LEVEL(000~015)C LEVEL(000~015)
CAMERA ID
SYNC INT
LANGUAGE ENGLISH/ / / / / //
DEUTSCH FRANCAIS PYCCK PORTUGUES
ESPANOL
OFFON
NN^
^
CAMERA RESET
8
9
SETTING MENU AND FUNCTION
TO Open and Exi t the Menu screen
1. Press "SET" but ton.
The Menu screen appears on the moni tor. Check the current set t ings on
the menu.
2. Push or but ton to select the opt ions then use or but ton to select a
mode.
NEXT: To the next setup menu.
BACK: Return to the prev ious.
RETURN: Return to the prev ious.
SAVE ALL: Used to save the var ious set t ing of the in terna l OSD menu
in the EEPROM together.
EXIT: Ex i t the setup menu.
SETUP MENU
AUTOAUTOATWBLC
OFFOFF
LENSSHUTTER/AGCWHITE BALBACKLIGHTPICT ADJUSTATRPRIVACY
NEXTEXIT SAVE ALL
SETUP MENU
OFFINTENGLISH
NRCAMERA IDSYNCLANGUAGECAMERA RESET
BACKEXIT SAVE ALL
LENS
This funct ion is used to set the mechanica l i r is of the lens.
1. Select [LENS] opt ion.
2. Push or but ton to select a mode.
LENS mode changes as fo l lows:
AUTO: Select the auto i r is lens.
MANUAL: Select the manual i r is lens.
3. Select an AUTO then press "SET" but ton.
The AUTO IRIS menu appears.
AUTO MANUAL
AUTO IRIS
DCAUTO
080
TYPEMODESPEED
RETURN
10
AUTO (AUTO IRIS)
FUNCTION OPTION DESCRIPTION
TYPE
SPEED
MODE
DC
000~255
AUTO
OPEN
CLOSE
Sets the type of mechanica l i r is .
DC: Di rect dr ive s ignal .
Sets the convergence speed of the
mechanica l i r is .
Sets the type of cont ro l to be exerc ised over
the mechanica l i r is .
AUTO: The mechanica l i r is is cont ro l led
automat ica l ly.
OPEN: The mechanica l i r is is f ixed to open.
CLOSE: The mechanica l i r is is f ixed to c lose.
1. Without LENS option in the CMR7082/7084/7088N/P .
2. Only DC mode on the TYPE option. Because a DC auto iris lens is used with the
CMR7082X3.6N/P.
NOTES
SHUTTER/AGC
This funct ion is used to set AE(Auto Exposure) or ME(Manual Exposure) .
1 . Select [SHUTTER/AGC] opt ion.
2. Push or but ton to select an AUTO or
MANUAL then press "SET" but ton. The
AUTO SETUP or MANUAL SETUP menu
appears.
SHUTTER/AGC mode changes as fo l lows:
AUTO: Select the AE contro l .
MANUAL: Select the ME contro l .
AUTO MANUAL
AUTO SETUP
SHUT+AUTO IRIS024
AGCx0.50
HIGH LUMINANCE
BRIGHTNESS
LOW LUMINANCEMODEBRIGHTNESS
RETURN
MODE
11
AUTO (AE)
FUNCTION OPTION DESCRIPTION
HIGH
LUMINANCE
AUTO IRIS
SHUT+AUTO IRIS
Speci f ies AE contro l on the medium
and high br ightness s ide.
AUTO IRIS: F ixed elect ron ic shut ter.
[1 /60sec. (NTSC), 1/50sec. (PAL) ]
SHUT+AUTO IRIS: Auto elect ron ic
shut ter.
[1 /60sec. (1 /50sec. )~1/100,000sec. ]
MODE
000~255 Speci f ies the medium and high
br ightness s ide reference.
BRIGHTNESS
LOW
LUMINANCE
AGC
OFF
Speci f ies AE contro l on the low
br ightness s ide.
AGC: AGC ON
OFF: AGC OFF
MODE
x0.25
x0.50
x0.75
x1.00
Speci f ies the low br ightness s ide
reference.
BRIGHTNESS
MANUAL (ME)
FUNCTION OPTION DESCRIPTION
MODE SHUT+AGC "SHUT+AGC" is the only opt ion avai lab le
for the ME operat ion mode. There are no
other opt ions.
MANUAL SETUP
SHUT+AGC1/606.00
MODESHUTTERAGC
RETURN
12
AGC
SHUTTER
6.00
12.00
18.00
24.00
30.00
36.00
42.00
44.80
1/60(NTSC), 1/50(PAL)
1/100(NTSC), 1/120(PAL)
1/250
1/500
1/1000
1/2000
1/4000
1/10000
Sets the AGC value(dB) for ME.
Sets the ME shut ter speed( in f ract ions
of a second) .
Please select AUTO mode on the SHUTTER/AGC option. If you select MANUAL
mode, the over exposure may occur.
NOTE
WHITE BAL (WHITE BALANCE)
This funct ion is used to set the whi te balance operat ion mode.
1. Select [WHITE BAL] opt ion.
2. Push or but ton to select a mode.
WHITE BAL mode changes as fo l lows:
ATW PUSH USER1 USER2
PUSH LOCK MANUAL ANTI CR
ATW
239016
x1.00INDOOR
SPEEDDELAY CNTATW FRAMEENVIROMENT
RETURN
ATW (Auto Track ing Whi te balance)
This funct ion automat ica l ly t racks the changes in the color
temperature, and adjusts the whi te balance.
The color temperatures ranging f rom 1800K to 10500K.
13
FUNCTION OPTION DESCRIPTION
SPEED
DELAY CNT
ATW FRAME
ENVIROMENT
000~255
000~255
x0.50
x1.00
x1.50
x2.00
INDOOR
OUTDOOR
Adjusts the pul l - in speed of ATW.
Sets the t ime-based hysteres is of ATW.
Sets the pul l - in f rame magni f icat ion.
Sets the pul l - in f rame( indoor /outdoor) of ATW.
INDOOR: Select the indoor pul l - in f rame.
OUTDOOR: Select the outdoor pul l - in f rame.
PUSH (Ful l pu l l - in)
This funct ion adjusts the whi te balance regard less of the subject
condi t ions.
USER2 WB
045026
B-GAINR-GAIN
RETURN
USER1 WB
029034
B-GAINR-GAIN
RETURN
USER1
The gain values for the outdoor f ixed mode are used as the adjustment
i tems of USER1 on the interna l OSD menu.
USER2
The gain values for the f luorescent l ight f ixed mode are used as the
adjustment i tems of USER2 on the interna l OSD menu.
FUNCTION OPTION DESCRIPTION
B-GAIN
R-GAIN
000~255
000~255
Used for the B gain operat ion in the WB f ixed
gain mode.
Used for the R gain operat ion in the WB f ixed
gain mode.
14
ANTI CR (Color Rol l ing suppress ion)
This funct ion min imizes the color changes(co lor ro l l ing) over long
per iods caused by very smal l d i f ferences between the f l icker f requency
of non- inver ter f luorescent l ights and the dr ive f requency of the image
sensor dev ices.
MANUAL (Manual WB)
The B and R gain values for manual WB are set on th is screen.
MANUAL WB
058LEVEL
RETURN
FUNCTION OPTION DESCRIPTION
LEVEL 000~255 Sets the B and R gain values for manual WB.
By increment ing or decrement ing the B gain
value, the R gain value is a lso adjusted in
tandem.
PUSH LOCK (Hold)
The WB gain leve l estab l ished when operat ion has t ransfer red to the
PUSH LOCK mode is held.
1. Push or but ton to select [PUSH LOCK] Mode then press "SET"
but ton.
BACKLIGHT (BACKLIGHT Compensat ion)
This funct ion is used to set the back l ight compensat ion operat ion.
1. Select [BACKLIGHT] opt ion.
15
2. Push or but ton to select a mode.
BACKLGIHT mode changes as fo l lows:
BLC: Back l ight compensat ion ON.
HLC: HLC(High Light Compensat ion)
funct ion ON.
HLC is a funct ion that improves the
v isual recogni t ion of l icense plates
and other such objects by suppress ing or masking st rong hight
sources(such as the headl ights of automobi les) in dark p laces.
OFF: Back l ight Compensat ion OFF.
BLC HLC OFF
SETUP MENU
AUTOAUTOATW
OFFOFF
BLC
LENSSHUTTER/AGCWHITE BAL
PICT ADJUSTATRPRIVACY
NEXTEXIT SAVE ALL
BACKLIGHT
PICT ADJUST (PICTURE ADJUST)
1. Select [PICT ADJUST] opt ion and press
"SET" but ton. The PICT ADJUST menu
appears.
2. Push or but ton to select a mode or set
the funct ion leve l (000~255) .
PICT ADJUST mode changes as fo l lows:
MIRROR BRIGHTNESS CONTRAST
GAIN HUE SHARPNESS
PICT ADJUST
OFF000128128128128
MIRRORBRIGHTNESSCONTRASTSHARPNESSHUEGAIN
RETURN
FUNCTION OPTION DESCRIPTION
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
MIRROR
000~255
000~255
000~255
000~255
000~255
OFF
ON
Sets the screen br ightness.
Sets the screen contrast .
Sets the screen sharpness.
Adjusts the hue.
Adjusts the gain.
Sets the hor izonta l f l ip for the disp lay output .
OFF: Normal output .
ON: Hor izonta l f l ipped output
16
ATR (Adapt ive Tone Reproduct ion)
The ATR(Adapt ive Tone Reproduct ion) funct ion prov ides gradat ion
compensat ion to improve the contrast of subjects whose gradat ion has been
lost in cases where, for instance, both low- louminance areas and high-
luminance areas ex is t in the same pic ture.
1. Select [ATR] opt ion.
2. Push or but ton to select a ON and press
"SET" but ton. The ATR menu appears.
3. Push or but ton to set the luminance
level and contrast leve l .
LUMINANCE level changes as fo l lows:
CONTRAST level changes as fo l lows:
LOW MID HIGH
ATR
LOWLOW
LUMINANCECONTRAST
RETURN
LOW MIDLOW MID MIDHIGH HIGH
FUNCTION OPTION DESCRIPTION
LUMINANCE
CONTRAST
LOW
MID
HIGH
LOW
MIDLOW
MID
MIDHIGH
HIGH
Sets the extent of the luminance compress ion.
Sets the extent of the contrast enhancement .
Th is funct ion is used to set up to e ight
pr ivacy masks.
1. Select [PRIVACY] opt ion.
2. Push or but ton to select a ON and press
"SET" but ton. The PRIVACY menu appears.
3. Push or but ton to select a mode or set
the mask f rame posi t ion.
PRIVACY
PRIVACY
1/8020070020090
81.00OFF
AREA SELTOPBOTTOMLEFTRIGHT
COLORTRANSPMOSAICRETURN
17
FUNCTION OPTION DESCRIPTION
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
1/8, 2/8, 3/8, 4/8,
5/8, 6/8, 7/8, 8/8,
000~244(NTSC)
000~288(PAL)SI
000~244(NTSC)
000~288(PAL)SI
000~474(NTSC)
000~468(PAL)SI
000~474(NTSC)
000~468(PAL)SI
Selects the mask f rame to be adjusted.
Sets the top s ide of the mask f rame selected
by the AREA SEL parameter.
Sets the bot tom side of the mask f rame
selected by the AREA SEL parameter.
Sets the le f t s ide of the mask f rame selected
by the AREA SEL parameter.
Sets the r ight s ide of the mask f rame selected
by the AREA SEL parameter.
COLOR 1~8 Sets the colors of the mask f rames.
TRANSP
MOSAIC
0.00
0.50
0.75
1.00
OFF
ON
Sets the t ransparency rat io of the mask f rames.
The same transparency rat io va lue is set for
a l l the mask f rames.
Sets the mask f rame mosaic funct ion to ON or
OFF.
OFF: Mosaic funct ion OFF.
ON: Mosaic funct ion ON.
NR (Noise Reduct ion)
This funct ion is used to set the noise reduct ion.
1. Select [NR] opt ion and press "SET" but ton.
The NR menu appears.
2. Push or but ton to select one of four
modes for NR or set the di f ferent f i l ter
s t rength.
NR mode changes as fo l lows:
NR
Y/C004004
NR MODEY LEVELC LEVEL
RETURNY/C OFF Y C
18
FUNCTION OPTION DESCRIPTION
NR MODE Y/C
OFF
Y
C
Sets the 2D NR f i l ter mode.
Y/C: Y and C f i l ters ON.
OFF: Through
Y: Y f i l ter ON.
C: C f i l ter ON.
Y LEVEL
C LEVEL
000~015
000~015
Sets the Y f i l ter s t rength.
Sets the C f i l ter s t rength.
CAMERA ID
This funct ion is used to set the camera ID.
1. Select [CAMERA ID] opt ion.
2. Use or but ton to select a ON and press "SET" but ton. The CAMERA ID
menu appears.
CAMERA ID
RETURN
A
(
W
B
)
X
C
_
Y
D
Z
E
,
0
F
1
G
2
H
3
I
<
4
J
=
5
K
>
6
L
?
7
M
@
8
N
9
O
^
-
P
!
Q
"
R
x
#
S
+
$
T
/
%
U
&
V
'
CHR1 CHR2
CLR POS
CAMERA ID
RETURN
CHR1 CHR2
CLR POS
1
3. Use , , or but ton to select a le t ter, numera l or symbol .
(B lank) : Inser ts a space at the cursor pos i t ion.
CHR1: Let ters A to Z, numera ls 0 to 9, symbols .
CHR2: 40 t rad i t ional Chinese.
: Moves cursor to le f t , r ight , up or down.
CLR: I f you enter the wrong code, se lect CLR then press "SET" but ton.
POS: Use , , or but ton to move posi t ion of CAMERA ID on the
screen.
1
19
SYNC
This funct ion is used to d isp lay the current synchronizat ion mode.
The SYNC mode is f ixed to the INT( In terna l synchronizat ion) .
SETUP MENU
OFF
ENGLISHINT
NRCAMERA ID
LANGUAGECAMERA RESET
BACKEXIT SAVE ALL
SYNC
LANGUAGE
This funct ion is used to select the language in which to d isp lay the in terna l
OSD menu.
1. Select [LANGUAGE] opt ion.
2. Push or but ton to select a language.
SETUP MENU
OFFINTENGLISH
NR
SYNCCAMERA ID
CAMERA RESET
BACKEXIT SAVE ALL
LANGUAGE
CAMERA RESET
This funct ion is in i t ia l izes al l the in terna l OSD menu set t ing together.
1 . Select [CAMERA RESET] opt ion.
2. Press "SET" but ton to reset the camera
set t ing to in i t ia l set t ing.
SETUP MENU
OFFINTENGLISH
NR
SYNCLANGUAGE
CAMERA ID
BACKEXIT SAVE ALL
CAMERA RESET
20
SPECIFICATIONS
Model No.
Lens
Power Input Vol tage
System
Sync. Mode
Menu Contro l
P ick Up Element
Effect ive Pixe ls
Chip Size
Hor izonta l & Ver t ica l
Sync. Frequency
Scanning System
Resolut ion
Min imum I l luminat ion
Shut ter
Adapt ive Tone
Reproduct ion
S/N Rat io
Auto Gain Contro l
Whi te Balance
Noise Reduct ion
Pic ture Adjust
Pr ivacy Masking
Pr ivacy Masking Zone
OSD Language
Power Consumpt ion
Back Light Compensat ion
Video Output
Operat ing Temperature
Gamma Character is t ic
IP Rat ing
Window
Inf rared
LEDBeam Spread
Peak Wavelength
Focal Length
I r is
Angle of v iew
H
Auto
Luminance
V
Manual
Contrast
D
CMR7082N/P3.6
1 /60(1/50)S ~ 1/100,000S
LOW / MID / HIGH
1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S
LOW / MIDLOW / MID / MIDHIGH / HIGH
NTSC or PAL
AC24V ( 10%)
Interna l
OSD Contro l
1 /3" Exv iew HAD CCD Sensor
976(H) x 494(V) [NTSC]
976(H) x 582(V) [PAL]
5.58mm(H) x 4.67mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 Inter lace
Color : 700TV Lines, Mono: 750TV Lines
0.2Lux/F1.8, 0Lux( IR On)
More Then 50dB (AGC-OFF)
AUTO / MANUAL
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
Y / C / Y/C / OFF
MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
ON / OFF
8 Zones
ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE
7.8W
BLC / HLC(High Light Compensat ion) / OFF
IP66
65 Heat Resistant Glass
850nm
30
CVBS 1.0Vp-p, 75ohm
-10 ~ +50 (14 ~ 122 )
=0.45
D/N ATR 700TVL IR CAMERA
AC100~240V
3.6mm
F2.0
73
54.5
92
Radiant Dis tance
Dimension
Weight
30M
Body:82mm(W) x 72.5mm(H) x 154mm(D), Bracket : 101mm(L)
530g
Design and speci f icat ions are subject to change wi thout not ice.
CMR7082N/P6 CMR7084N/P3.6 CMR7084N/P6 CMR7088N/P3.6 CMR7088N/P6
DC12V ( 10%)
6mm
F1.8
44.5
33.1
56
3.6mm
F2.0
73
54.5
92
6mm
F1.8
44.5
33.1
56
3.6mm
F2.0
73
54.5
92
6mm
F1.8
44.5
33.1
56
11W
540g
21 66-CMR708CSE-1
Model No.
Lens
Power Input Vol tage
System
Sync. Mode
Menu Contro l
P ick Up Element
Effect ive Pixe ls
Chip Size
Hor izonta l & Ver t ica l
Sync. Frequency
Scanning System
Inf rared Cut Fi l ter
Resolut ion
Min imum I l luminat ion
Shut ter
Adapt ive Tone
Reproduct ion
S/N Rat io
Auto Gain Contro l
Whi te Balance
Noise Reduct ion
Pic ture Adjust
Pr ivacy Masking
Pr ivacy Masking Zone
OSD Language
Power Consumpt ion
Back Light Compensat ion
Video Output
Operat ing Temperature
Gamma Character is t ic
IP Rat ing
Window
Inf rared
LEDBeam Spread
Peak Wavelength
Focal Length
I r is
Angle of v iew
H
Color
Auto
Luminance
V
Mono
Manual
Contrast
D
IR On
CMR7082X3.6N/P
0.045Lux / F1.4
1/60(1/50)S ~ 1/100,000S
LOW / MID / HIGH
0.009Lux / F1.4
1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S
LOW / MIDLOW / MID / MIDHIGH / HIGH
NTSC or PAL
DC12V ( 10%)
Interna l
OSD Contro l
1 /3" Exv iew HAD CCD Sensor
976(H) x 494(V) [NTSC]
976(H) x 582(V) [PAL]
5.58mm(H) x 4.67mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 Inter lace
Color : 700TV Lines, Mono: 750TV Lines
0Lux
More Then 50dB (AGC-OFF)
Auto Selectab le , Automat ic Swi tch From Color Mode to Monochrome
AUTO / MANUAL
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
Y / C / Y/C / OFF
MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
ON / OFF
8 Zones
ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE
6.8W
BLC / HLC(High Light Compensat ion) / OFF
IP66
65 Heat Resistant Glass
850nm
30
CVBS 1.0Vp-p, 75ohm
-10 ~ +50 (14 ~ 122 )
=0.45
D/N ATR 700TVL VARI-FOCAL IR CAMERA
3.3 ~ 12mm
F1.4
89.8 ~ 23.9
63.6 ~ 17.9
125.7 ~ 29.9
Radiant Dis tance
Dimension
Weight
30M
Body:82mm(W) x 72.5mm(H) x 154mm(D), Bracket : 101mm(L)
550g
Design and speci f icat ions are subject to change wi thout not ice.
MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com
INSTRUCTION MANUAL
CMR7082/7084/7088 N/P 3.6/6
66-CMR708CSE
D/N ATR 700TVL IR CAMERA
CMR7082X3.6 N/P
D/N ATR 700TVL VARI-FOCAL IR CAMERA