MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com

INSTRUCTION MANUAL

CMR7082/7084/7088 N/P 3.6/6

66-CMR708CSE

D/N ATR 700TVL IR CAMERA

CMR7082X3.6 N/P

D/N ATR 700TVL VARI-FOCAL IR CAMERA

IMPORTANT SAFEGUARDS

GRAPHIC SYMBOL EXPLANATION

The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence ofuninsulated "dangerous voltage" within the product's enclosurethat may be of sufficient magnitude to constitute a risk of electric

The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important operating andmain tenance (serv ic ing) ins t ruc t ions in the l i te ra ture

shock to persons.

accompanying the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS

CAUTION

Do not drop or strike this equipment.

Do not install the equipment near any naked flames or heat

sources.

Do not expose this unit to rain or excessive moisture, avoid

smoke and dust.

Do not cover cloth or to install this unit in poorly ventilated

places.

Do not continue to operate if there appears to be fault.

Do not touch the power connection with wet hands.

Do not damage the power cord or leave it under pressure.

Sensitive electronics inside are vulnerable to excessive shock.

Excessive heat could damage this unit.

Please the camera in an environmental housing for protection.

If the camera gets wet, unplug it and have it checked by

qualified service personnel.

This may lead to overheating.

If the unit ceases to function, contact qualified service

personnel for help.

Risk of short circuit or electric shock.

Risk of fire or shock circuit.

CONGRATULATIONS

Thank you for purchasing this D/N ATR 700TVL (Vari-Focal)IR

Camera. You now own one of the many fine CCTV products we

manufactured. This product has been carefully inspected under

rigid quality control and should reach you in perfect condition.

With reasonable care, it will provide years of reliable performance.

We recommend that you read this installation and operation

manual thoroughly before installing and operation your new

system.

Here you will find all the information you need to set up and use

the system. If any questions are not answered in the manual,

please contact your dealer.

Before proceeding, please read and observe all instructions and

warnings contained in this manual. Retain this manual with the

original bill of sale for future reference and, if necessary, warranty

service.

When unpacking your new camera, check for missing or damaged

items. If any item is missing, or if damage is evident,

I . Contact your dealer for

assistance.

DO NOT

NSTALL OR OPERATE THIS PRODUCT

WARRANTY INFORMATION

Please complete the following product purchase information. The

factory will requests this information when contacted for technical

support, or warranty repair. It is also valuable in case of loss or

theft.

Purchase Date

Serial Number

Model Number

TABLE OF CONTENTS

PART DESCRIPTION & DIMENSION

INSTALLATION

CONFIGURATION OF THE MENU

SETTING MENU AND FUNCTION

To Open and Exit the Menu screen

LENS

SHUTTER/AGC

WHITE BAL (White Balance)

BACKLIGHT (Backlight Compensation)

PICT ADJUST (Picture Adjust)

ATR (Adaptive Tone Reproduction)

PRIVACY

NR (Noise Reduction)

CAMERA ID

SYNC

LANGUAGE

CAMERA RESET

SPECIFICATIONS

1

2

7

9

9

9

10

12

14

15

16

16

17

18

19

19

19

20

1

TOP COVER

BOTTOM CHASSIS

BRACKET

PAN ADJUSTMENT SCREW

TILT ADJUSTMENT SCREW

WINDOW

VIDEO OUTPUT JACK (CMR7082)

DC POWER INPUT JACK (

)

DC12V 10%,

CMR7082

Unit: mm

154

101

72.5

6782

PART DESCRIPTION & DIMENSION

2

DC power input

Video output

INSTALLATION

FIG. 1 FIG. 2

1. CMR70821-1. Take out the camera from the inner box first. Plug the video cable and

power cable to video output jack and DC power input jack of the camera

(FIG.1). Then fix bracket to the wall(FIG.2).

1-2. Loosen the screws of top cover with screw driver(FIG.3).

FIG. 3

2. CMR7084/82-1. Take out the camera from the inner box first. Loosen the pan adjustment

screw with hexagon screw driver. Then, separated the bracket from the

camera body(FIG.4). Put the power cable and video cable through the

bracket and then fix it to the wall(FIG.5&FIG.6).

3

FIG. 4

FIG. 6FIG. 5

2-2. Open the top cover with screw driver(FIG.7).

FIG. 7

2-3. Next, Put the power cable and video cable through the bottom chassis and

rubble(FIG.8) and then fix the camera body on the bracket(FIG.9).

4

Video Output Video Cable

FIG. 9FIG. 8

2-4. Plug and fix the power cable to the terminal and plug the video cable to

vidoe output of the camera(FIG.10). Also for the security, please use the

adhesive tape to wrap the connection of video cable(FIG.11).

FIG. 11FIG. 10

Live

Earth

Neutral

NL

Note : When using two-cord

power cable, please

connect them to

"Live" and "Neutral".

3. Loosen the pan and tilt adjustment screw on the bracket to turn the camera body

to the desired angle and then tighten the screws(FIG.12).

4-1. USER OSD SETTING

Set t ing swi tches and Funct ions.

A. (UP)

B. (LEFT)

5

FIG. 12

4. First, adjust the lens on focus and zoom to form the optimal video image after

that tighten the screws(FIG.13). Then adjust the OSD menu to form the

optimal image. Please refer to page7~19.

: Press to move the cursor upwards or to se lect

i tems.

: Press to move the cursor to the le f t and to select

or ad just the parameters of the selected i tem.

The parameters changes each t ime th is but ton is

pressed.

FIG. 13

F

TW

ZOOMFOCUS

N

RIGHTLEFT

DOWN

UP

SET

6

FIG. 15

5. Replace the top cover and tighten the screws(FIG.14&FIG.15).

FIG. 14

C. (RIGHT)

D. (DOWN)

E. SET : Executes select ions and disp lays a submenu for an

i tem wi th the mark.

: Press to move the cursor to the r ight and

select or ad just the parameters of the selected

i tem. The parameters changes each t ime th is

but ton is pressed.

: Press to move the cursor downwards or to se lect

i tems.

CONFIGURATION OF THE MENU

SETUPMENU

LENS

SHUTTER/AGC

AUTO

AUTO

MANUAL

MANUAL

HIGH LUMINANCE

LOW LUMINANCE

MODE SHUT+AGCSHUTTER 1/60(1/50) 1/100(1/120) 1/250~1/10000/ /AGC 6.00 12.00 18.00 24.00 30.00 36.00 42.00 44.80/ / / / / / /

MODE

MODE AGC OFF/BRIGHTNESS(000~255)

BRIGHTNESS x0.25 x0.50 x0.75 x1.00/ / /

AUTO IRISSHUT+AUTO IRIS

MODE AUTO OPEN CLOSE/ /SPEED(000~255)

TYPE DC

WHITE BAL

ATR

PICT ADJUST

BACKLIGHT BLC HLC OFF/ /

ATW

OFF

MIRROR OFF/ ON

B-GAIN(000~255)

B-GAIN(000~255)

LUMINANCE LOW MID HIGH/ /

SPEED(000~255)

PUSH

ON

BRIGHTNESS(000~255)CONTRAST(000~255)SHARPNESS(000~255)HUE(000~255)GAIN(000~255)

R-GAIN(000~255)

R-GAIN(000~255)

CONTRAST LOW MIDLOW MID MIDHIGH HIGH/ / / /

DELAY CNT(000~255)

USER 1

USER 2

ANTI CRMANUAL LEVEL(000~255)PUSH LOCK

ATW FRAME x0.50 x1.00 x1.50 x2.00/ / /ENVIRONMENT INDOOR OUTDOOR/

7

PRIVACY OFFAREA SEL 1/8~8/8ONTOP [000~244(NTSC), 000~288(PAL)]BOTTOM [000~244(NTSC), 000~288(PAL)]LEFT [000~474(NTSC), 000~468(PAL)]RIGHT [000~474(NTSC), 000~468(PAL)]COLOR(1~8)TRANSP 0.00 0.50 0.75 1.00/ / /MOSAIC OFF ON/

NR NR MODE Y/C OFF/ Y/ C/Y LEVEL(000~015)C LEVEL(000~015)

CAMERA ID

SYNC INT

LANGUAGE ENGLISH/ / / / / //

DEUTSCH FRANCAIS PYCCK PORTUGUES

ESPANOL

OFFON

NN^

^

CAMERA RESET

8

9

SETTING MENU AND FUNCTION

TO Open and Exi t the Menu screen

1. Press "SET" but ton.

The Menu screen appears on the moni tor. Check the current set t ings on

the menu.

2. Push or but ton to select the opt ions then use or but ton to select a

mode.

NEXT: To the next setup menu.

BACK: Return to the prev ious.

RETURN: Return to the prev ious.

SAVE ALL: Used to save the var ious set t ing of the in terna l OSD menu

in the EEPROM together.

EXIT: Ex i t the setup menu.

SETUP MENU

AUTOAUTOATWBLC

OFFOFF

LENSSHUTTER/AGCWHITE BALBACKLIGHTPICT ADJUSTATRPRIVACY

NEXTEXIT SAVE ALL

SETUP MENU

OFFINTENGLISH

NRCAMERA IDSYNCLANGUAGECAMERA RESET

BACKEXIT SAVE ALL

LENS

This funct ion is used to set the mechanica l i r is of the lens.

1. Select [LENS] opt ion.

2. Push or but ton to select a mode.

LENS mode changes as fo l lows:

AUTO: Select the auto i r is lens.

MANUAL: Select the manual i r is lens.

3. Select an AUTO then press "SET" but ton.

The AUTO IRIS menu appears.

AUTO MANUAL

AUTO IRIS

DCAUTO

080

TYPEMODESPEED

RETURN

10

AUTO (AUTO IRIS)

FUNCTION OPTION DESCRIPTION

TYPE

SPEED

MODE

DC

000~255

AUTO

OPEN

CLOSE

Sets the type of mechanica l i r is .

DC: Di rect dr ive s ignal .

Sets the convergence speed of the

mechanica l i r is .

Sets the type of cont ro l to be exerc ised over

the mechanica l i r is .

AUTO: The mechanica l i r is is cont ro l led

automat ica l ly.

OPEN: The mechanica l i r is is f ixed to open.

CLOSE: The mechanica l i r is is f ixed to c lose.

1. Without LENS option in the CMR7082/7084/7088N/P .

2. Only DC mode on the TYPE option. Because a DC auto iris lens is used with the

CMR7082X3.6N/P.

NOTES

SHUTTER/AGC

This funct ion is used to set AE(Auto Exposure) or ME(Manual Exposure) .

1 . Select [SHUTTER/AGC] opt ion.

2. Push or but ton to select an AUTO or

MANUAL then press "SET" but ton. The

AUTO SETUP or MANUAL SETUP menu

appears.

SHUTTER/AGC mode changes as fo l lows:

AUTO: Select the AE contro l .

MANUAL: Select the ME contro l .

AUTO MANUAL

AUTO SETUP

SHUT+AUTO IRIS024

AGCx0.50

HIGH LUMINANCE

BRIGHTNESS

LOW LUMINANCEMODEBRIGHTNESS

RETURN

MODE

11

AUTO (AE)

FUNCTION OPTION DESCRIPTION

HIGH

LUMINANCE

AUTO IRIS

SHUT+AUTO IRIS

Speci f ies AE contro l on the medium

and high br ightness s ide.

AUTO IRIS: F ixed elect ron ic shut ter.

[1 /60sec. (NTSC), 1/50sec. (PAL) ]

SHUT+AUTO IRIS: Auto elect ron ic

shut ter.

[1 /60sec. (1 /50sec. )~1/100,000sec. ]

MODE

000~255 Speci f ies the medium and high

br ightness s ide reference.

BRIGHTNESS

LOW

LUMINANCE

AGC

OFF

Speci f ies AE contro l on the low

br ightness s ide.

AGC: AGC ON

OFF: AGC OFF

MODE

x0.25

x0.50

x0.75

x1.00

Speci f ies the low br ightness s ide

reference.

BRIGHTNESS

MANUAL (ME)

FUNCTION OPTION DESCRIPTION

MODE SHUT+AGC "SHUT+AGC" is the only opt ion avai lab le

for the ME operat ion mode. There are no

other opt ions.

MANUAL SETUP

SHUT+AGC1/606.00

MODESHUTTERAGC

RETURN

12

AGC

SHUTTER

6.00

12.00

18.00

24.00

30.00

36.00

42.00

44.80

1/60(NTSC), 1/50(PAL)

1/100(NTSC), 1/120(PAL)

1/250

1/500

1/1000

1/2000

1/4000

1/10000

Sets the AGC value(dB) for ME.

Sets the ME shut ter speed( in f ract ions

of a second) .

Please select AUTO mode on the SHUTTER/AGC option. If you select MANUAL

mode, the over exposure may occur.

NOTE

WHITE BAL (WHITE BALANCE)

This funct ion is used to set the whi te balance operat ion mode.

1. Select [WHITE BAL] opt ion.

2. Push or but ton to select a mode.

WHITE BAL mode changes as fo l lows:

ATW PUSH USER1 USER2

PUSH LOCK MANUAL ANTI CR

ATW

239016

x1.00INDOOR

SPEEDDELAY CNTATW FRAMEENVIROMENT

RETURN

ATW (Auto Track ing Whi te balance)

This funct ion automat ica l ly t racks the changes in the color

temperature, and adjusts the whi te balance.

The color temperatures ranging f rom 1800K to 10500K.

13

FUNCTION OPTION DESCRIPTION

SPEED

DELAY CNT

ATW FRAME

ENVIROMENT

000~255

000~255

x0.50

x1.00

x1.50

x2.00

INDOOR

OUTDOOR

Adjusts the pul l - in speed of ATW.

Sets the t ime-based hysteres is of ATW.

Sets the pul l - in f rame magni f icat ion.

Sets the pul l - in f rame( indoor /outdoor) of ATW.

INDOOR: Select the indoor pul l - in f rame.

OUTDOOR: Select the outdoor pul l - in f rame.

PUSH (Ful l pu l l - in)

This funct ion adjusts the whi te balance regard less of the subject

condi t ions.

USER2 WB

045026

B-GAINR-GAIN

RETURN

USER1 WB

029034

B-GAINR-GAIN

RETURN

USER1

The gain values for the outdoor f ixed mode are used as the adjustment

i tems of USER1 on the interna l OSD menu.

USER2

The gain values for the f luorescent l ight f ixed mode are used as the

adjustment i tems of USER2 on the interna l OSD menu.

FUNCTION OPTION DESCRIPTION

B-GAIN

R-GAIN

000~255

000~255

Used for the B gain operat ion in the WB f ixed

gain mode.

Used for the R gain operat ion in the WB f ixed

gain mode.

14

ANTI CR (Color Rol l ing suppress ion)

This funct ion min imizes the color changes(co lor ro l l ing) over long

per iods caused by very smal l d i f ferences between the f l icker f requency

of non- inver ter f luorescent l ights and the dr ive f requency of the image

sensor dev ices.

MANUAL (Manual WB)

The B and R gain values for manual WB are set on th is screen.

MANUAL WB

058LEVEL

RETURN

FUNCTION OPTION DESCRIPTION

LEVEL 000~255 Sets the B and R gain values for manual WB.

By increment ing or decrement ing the B gain

value, the R gain value is a lso adjusted in

tandem.

PUSH LOCK (Hold)

The WB gain leve l estab l ished when operat ion has t ransfer red to the

PUSH LOCK mode is held.

1. Push or but ton to select [PUSH LOCK] Mode then press "SET"

but ton.

BACKLIGHT (BACKLIGHT Compensat ion)

This funct ion is used to set the back l ight compensat ion operat ion.

1. Select [BACKLIGHT] opt ion.

15

2. Push or but ton to select a mode.

BACKLGIHT mode changes as fo l lows:

BLC: Back l ight compensat ion ON.

HLC: HLC(High Light Compensat ion)

funct ion ON.

HLC is a funct ion that improves the

v isual recogni t ion of l icense plates

and other such objects by suppress ing or masking st rong hight

sources(such as the headl ights of automobi les) in dark p laces.

OFF: Back l ight Compensat ion OFF.

BLC HLC OFF

SETUP MENU

AUTOAUTOATW

OFFOFF

BLC

LENSSHUTTER/AGCWHITE BAL

PICT ADJUSTATRPRIVACY

NEXTEXIT SAVE ALL

BACKLIGHT

PICT ADJUST (PICTURE ADJUST)

1. Select [PICT ADJUST] opt ion and press

"SET" but ton. The PICT ADJUST menu

appears.

2. Push or but ton to select a mode or set

the funct ion leve l (000~255) .

PICT ADJUST mode changes as fo l lows:

MIRROR BRIGHTNESS CONTRAST

GAIN HUE SHARPNESS

PICT ADJUST

OFF000128128128128

MIRRORBRIGHTNESSCONTRASTSHARPNESSHUEGAIN

RETURN

FUNCTION OPTION DESCRIPTION

BRIGHTNESS

CONTRAST

SHARPNESS

HUE

GAIN

MIRROR

000~255

000~255

000~255

000~255

000~255

OFF

ON

Sets the screen br ightness.

Sets the screen contrast .

Sets the screen sharpness.

Adjusts the hue.

Adjusts the gain.

Sets the hor izonta l f l ip for the disp lay output .

OFF: Normal output .

ON: Hor izonta l f l ipped output

16

ATR (Adapt ive Tone Reproduct ion)

The ATR(Adapt ive Tone Reproduct ion) funct ion prov ides gradat ion

compensat ion to improve the contrast of subjects whose gradat ion has been

lost in cases where, for instance, both low- louminance areas and high-

luminance areas ex is t in the same pic ture.

1. Select [ATR] opt ion.

2. Push or but ton to select a ON and press

"SET" but ton. The ATR menu appears.

3. Push or but ton to set the luminance

level and contrast leve l .

LUMINANCE level changes as fo l lows:

CONTRAST level changes as fo l lows:

LOW MID HIGH

ATR

LOWLOW

LUMINANCECONTRAST

RETURN

LOW MIDLOW MID MIDHIGH HIGH

FUNCTION OPTION DESCRIPTION

LUMINANCE

CONTRAST

LOW

MID

HIGH

LOW

MIDLOW

MID

MIDHIGH

HIGH

Sets the extent of the luminance compress ion.

Sets the extent of the contrast enhancement .

Th is funct ion is used to set up to e ight

pr ivacy masks.

1. Select [PRIVACY] opt ion.

2. Push or but ton to select a ON and press

"SET" but ton. The PRIVACY menu appears.

3. Push or but ton to select a mode or set

the mask f rame posi t ion.

PRIVACY

PRIVACY

1/8020070020090

81.00OFF

AREA SELTOPBOTTOMLEFTRIGHT

COLORTRANSPMOSAICRETURN

17

FUNCTION OPTION DESCRIPTION

AREA SEL

TOP

BOTTOM

LEFT

RIGHT

1/8, 2/8, 3/8, 4/8,

5/8, 6/8, 7/8, 8/8,

000~244(NTSC)

000~288(PAL)SI

000~244(NTSC)

000~288(PAL)SI

000~474(NTSC)

000~468(PAL)SI

000~474(NTSC)

000~468(PAL)SI

Selects the mask f rame to be adjusted.

Sets the top s ide of the mask f rame selected

by the AREA SEL parameter.

Sets the bot tom side of the mask f rame

selected by the AREA SEL parameter.

Sets the le f t s ide of the mask f rame selected

by the AREA SEL parameter.

Sets the r ight s ide of the mask f rame selected

by the AREA SEL parameter.

COLOR 1~8 Sets the colors of the mask f rames.

TRANSP

MOSAIC

0.00

0.50

0.75

1.00

OFF

ON

Sets the t ransparency rat io of the mask f rames.

The same transparency rat io va lue is set for

a l l the mask f rames.

Sets the mask f rame mosaic funct ion to ON or

OFF.

OFF: Mosaic funct ion OFF.

ON: Mosaic funct ion ON.

NR (Noise Reduct ion)

This funct ion is used to set the noise reduct ion.

1. Select [NR] opt ion and press "SET" but ton.

The NR menu appears.

2. Push or but ton to select one of four

modes for NR or set the di f ferent f i l ter

s t rength.

NR mode changes as fo l lows:

NR

Y/C004004

NR MODEY LEVELC LEVEL

RETURNY/C OFF Y C

18

FUNCTION OPTION DESCRIPTION

NR MODE Y/C

OFF

Y

C

Sets the 2D NR f i l ter mode.

Y/C: Y and C f i l ters ON.

OFF: Through

Y: Y f i l ter ON.

C: C f i l ter ON.

Y LEVEL

C LEVEL

000~015

000~015

Sets the Y f i l ter s t rength.

Sets the C f i l ter s t rength.

CAMERA ID

This funct ion is used to set the camera ID.

1. Select [CAMERA ID] opt ion.

2. Use or but ton to select a ON and press "SET" but ton. The CAMERA ID

menu appears.

CAMERA ID

RETURN

A

(

W

B

)

X

C

_

Y

D

Z

E

,

0

F

1

G

2

H

3

I

<

4

J

=

5

K

>

6

L

?

7

M

@

8

N

9

O

^

-

P

!

Q

"

R

x

#

S

+

$

T

/

%

U

&

V

'

CHR1 CHR2

CLR POS

CAMERA ID

RETURN

CHR1 CHR2

CLR POS

1

3. Use , , or but ton to select a le t ter, numera l or symbol .

(B lank) : Inser ts a space at the cursor pos i t ion.

CHR1: Let ters A to Z, numera ls 0 to 9, symbols .

CHR2: 40 t rad i t ional Chinese.

: Moves cursor to le f t , r ight , up or down.

CLR: I f you enter the wrong code, se lect CLR then press "SET" but ton.

POS: Use , , or but ton to move posi t ion of CAMERA ID on the

screen.

1

19

SYNC

This funct ion is used to d isp lay the current synchronizat ion mode.

The SYNC mode is f ixed to the INT( In terna l synchronizat ion) .

SETUP MENU

OFF

ENGLISHINT

NRCAMERA ID

LANGUAGECAMERA RESET

BACKEXIT SAVE ALL

SYNC

LANGUAGE

This funct ion is used to select the language in which to d isp lay the in terna l

OSD menu.

1. Select [LANGUAGE] opt ion.

2. Push or but ton to select a language.

SETUP MENU

OFFINTENGLISH

NR

SYNCCAMERA ID

CAMERA RESET

BACKEXIT SAVE ALL

LANGUAGE

CAMERA RESET

This funct ion is in i t ia l izes al l the in terna l OSD menu set t ing together.

1 . Select [CAMERA RESET] opt ion.

2. Press "SET" but ton to reset the camera

set t ing to in i t ia l set t ing.

SETUP MENU

OFFINTENGLISH

NR

SYNCLANGUAGE

CAMERA ID

BACKEXIT SAVE ALL

CAMERA RESET

20

SPECIFICATIONS

Model No.

Lens

Power Input Vol tage

System

Sync. Mode

Menu Contro l

P ick Up Element

Effect ive Pixe ls

Chip Size

Hor izonta l & Ver t ica l

Sync. Frequency

Scanning System

Resolut ion

Min imum I l luminat ion

Shut ter

Adapt ive Tone

Reproduct ion

S/N Rat io

Auto Gain Contro l

Whi te Balance

Noise Reduct ion

Pic ture Adjust

Pr ivacy Masking

Pr ivacy Masking Zone

OSD Language

Power Consumpt ion

Back Light Compensat ion

Video Output

Operat ing Temperature

Gamma Character is t ic

IP Rat ing

Window

Inf rared

LEDBeam Spread

Peak Wavelength

Focal Length

I r is

Angle of v iew

H

Auto

Luminance

V

Manual

Contrast

D

CMR7082N/P3.6

1 /60(1/50)S ~ 1/100,000S

LOW / MID / HIGH

1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S

LOW / MIDLOW / MID / MIDHIGH / HIGH

NTSC or PAL

AC24V ( 10%)

Interna l

OSD Contro l

1 /3" Exv iew HAD CCD Sensor

976(H) x 494(V) [NTSC]

976(H) x 582(V) [PAL]

5.58mm(H) x 4.67mm(V)

15.734 KHz / 59.94Hz [NTSC]

15.625 KHz / 50Hz [PAL]

2:1 Inter lace

Color : 700TV Lines, Mono: 750TV Lines

0.2Lux/F1.8, 0Lux( IR On)

More Then 50dB (AGC-OFF)

AUTO / MANUAL

ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

Y / C / Y/C / OFF

MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN

ON / OFF

8 Zones

ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE

7.8W

BLC / HLC(High Light Compensat ion) / OFF

IP66

65 Heat Resistant Glass

850nm

30

CVBS 1.0Vp-p, 75ohm

-10 ~ +50 (14 ~ 122 )

=0.45

D/N ATR 700TVL IR CAMERA

AC100~240V

3.6mm

F2.0

73

54.5

92

Radiant Dis tance

Dimension

Weight

30M

Body:82mm(W) x 72.5mm(H) x 154mm(D), Bracket : 101mm(L)

530g

Design and speci f icat ions are subject to change wi thout not ice.

CMR7082N/P6 CMR7084N/P3.6 CMR7084N/P6 CMR7088N/P3.6 CMR7088N/P6

DC12V ( 10%)

6mm

F1.8

44.5

33.1

56

3.6mm

F2.0

73

54.5

92

6mm

F1.8

44.5

33.1

56

3.6mm

F2.0

73

54.5

92

6mm

F1.8

44.5

33.1

56

11W

540g

21 66-CMR708CSE-1

Model No.

Lens

Power Input Vol tage

System

Sync. Mode

Menu Contro l

P ick Up Element

Effect ive Pixe ls

Chip Size

Hor izonta l & Ver t ica l

Sync. Frequency

Scanning System

Inf rared Cut Fi l ter

Resolut ion

Min imum I l luminat ion

Shut ter

Adapt ive Tone

Reproduct ion

S/N Rat io

Auto Gain Contro l

Whi te Balance

Noise Reduct ion

Pic ture Adjust

Pr ivacy Masking

Pr ivacy Masking Zone

OSD Language

Power Consumpt ion

Back Light Compensat ion

Video Output

Operat ing Temperature

Gamma Character is t ic

IP Rat ing

Window

Inf rared

LEDBeam Spread

Peak Wavelength

Focal Length

I r is

Angle of v iew

H

Color

Auto

Luminance

V

Mono

Manual

Contrast

D

IR On

CMR7082X3.6N/P

0.045Lux / F1.4

1/60(1/50)S ~ 1/100,000S

LOW / MID / HIGH

0.009Lux / F1.4

1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S

LOW / MIDLOW / MID / MIDHIGH / HIGH

NTSC or PAL

DC12V ( 10%)

Interna l

OSD Contro l

1 /3" Exv iew HAD CCD Sensor

976(H) x 494(V) [NTSC]

976(H) x 582(V) [PAL]

5.58mm(H) x 4.67mm(V)

15.734 KHz / 59.94Hz [NTSC]

15.625 KHz / 50Hz [PAL]

2:1 Inter lace

Color : 700TV Lines, Mono: 750TV Lines

0Lux

More Then 50dB (AGC-OFF)

Auto Selectab le , Automat ic Swi tch From Color Mode to Monochrome

AUTO / MANUAL

ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

Y / C / Y/C / OFF

MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN

ON / OFF

8 Zones

ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE

6.8W

BLC / HLC(High Light Compensat ion) / OFF

IP66

65 Heat Resistant Glass

850nm

30

CVBS 1.0Vp-p, 75ohm

-10 ~ +50 (14 ~ 122 )

=0.45

D/N ATR 700TVL VARI-FOCAL IR CAMERA

3.3 ~ 12mm

F1.4

89.8 ~ 23.9

63.6 ~ 17.9

125.7 ~ 29.9

Radiant Dis tance

Dimension

Weight

30M

Body:82mm(W) x 72.5mm(H) x 154mm(D), Bracket : 101mm(L)

550g

Design and speci f icat ions are subject to change wi thout not ice.

MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com

INSTRUCTION MANUAL

CMR7082/7084/7088 N/P 3.6/6

66-CMR708CSE

D/N ATR 700TVL IR CAMERA

CMR7082X3.6 N/P

D/N ATR 700TVL VARI-FOCAL IR CAMERA