D/N ATR 700TVL VARI-FOCAL IR CAMERA - verrocchio.itFIG.6 4. Next, use the provided M5.0x10 screws (silver-2pcs) to fix the camera body on the bracket with screw driver (FIG.6). 3 5

D/N ATR 700TVL VARI-FOCAL IR CAMERACMR7484X/7488X2.2 N/P & CMR7484X/7488X2.5 N/P & CMR7484X/7488X3.6 N/P

CMR7484X/7488X2.4 N/P

MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com 66-CMR748CSE

INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

1. Read Instructions

All the safety and operating instructions should be read before the unit is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future reference.

3. Head Warnings

All warnings on the unit and in the operating instructions should be adhered to.

4. Follow Instructions

All operating and user instructions should be followed.

5. Electrical Connections

Only a qualified electrician should make electrical connections.

6. Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Cable Runs

All cable runs must be within permissible distance.

8. Mounting

This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight

of the unit.

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT OPEN COVER.NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated "dangerous voltage" within theproduct's enclosure that may be of sufficient magnitude

The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions in

to constitute a risk of electric shock to persons.

the literature accompanying the unit.

UNPACKING

Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears

to have been damaged in shipment, replace it properly in its carton and notify the shipper.

Be sure to save:

1. The shipping carton and packaging material. They are the safest material in which to make future shipments

of the equipment.

2. This Installation and Operating Instruction.

SERVICE

If the unit ever needs repair service, the customer should contact our dealer or branch for authorization to

return and shipping instructions.

1

Part Description & Dimension

SUN SHIELD

TO P CO VER

BO TTO M CHASSIS

BRACKET

PAN ADJ USTM ENT SCREW

TI LT ADJ UST M ENT SCREW

WI NDO W

105

109

200

231

160

90

Unit : mm

INSTALLATION

1. Take out the bracket f rom the box f i rs t . Put the power cable and v ideo cable through　the bracket and then f ix i t to the wal l (F IG.1 & FIG.2) .

F IG .1 F IG .2

2

2. Secondly, take out the camera body and open the top cover wi th screw dr iver (FIG.3) .

F IG .3

3. Put the power cable and v ideo cable through the bracket rubble f i rs t and then go

　through the bot tom of camera body (FIG.4) . P lug and f ix the power cable to the

　terminal and p lug the v ideo cable to v ideo output o f the camera (FIG.5) .

F IG .4

L N

Note :

When using two-cord

power cable, please

connect them to

"Live" and "Neutral".

Live

Ear

th

Neu

tral

F IG .5

F IG .6

4. Next , use the prov ided M5.0x10 screws (s i lver -2pcs) to f ix the camera body on the　bracket wi th screw dr iver (FIG.6) .

3

5. Loosen the pan and t i l t ad justment screw on the bracket to turn the camera body to 　the des i red angle and then t ighten the screw (FIG.7) .

F IG .7

6. F i rs t , ad just the lens on focus and zoom to form the opt imal v ideo image af ter that

　t ighten the screws (FIG.8) . Then adjust the OSD menu.

　Please re fer to page5 ~page17.

RIGHTLEFT

DOWN

UP

SET

FOC U S o r ZOOMZOOM o r FOC U S

6-1. USER OSD SETTING

　　S

　　A. 　(UP)

　　B. 　(LEFT)

et t ing swi tches and Funct ions.

: Press to move the cursor upwards

or to se lect i tems.

: Press to move the cursor to the

le f t and to se lect or ad just the

parameters o f the se lected i tem.

The parameters changes each

t ime th is but ton is pressed.

RIGHTLEFT

DOWN

UP

SET

F IG .8

F IG .9 F IG .1 0

4

C. (RIGHT)

　　D. 　(DOWN)

　　E. SET : Executes se lect ions and d isp lays a submenu for an i tem wi th the

　　　　　　 mark.

　　　 : Press to move the cursor to the r ight and to se lect or

ad just the parameters o f the se lected i tem.

The parameters changes each t ime th is but ton is pressed.

: Press to move the cursor downwards or to se lect i tems.

7. Replace the top cover and t ighten the screws (FIG.9 & FIG.10) .

CONFIGURATION OF THE MENU

SETUPMENU

LENS

SHUTTER/AGC

WHITE BAL

ATR

PICT ADJUST

BACKLIGHT－BLC HLC OFF/ /

AUTO

AUTO

ATW

OFF

MIRROR－OFF/ ON

B-GAIN(000~255)

B-GAIN(000~255)

LUMINANCE－LOW MID HIGH/ /

SPEED(000~255)

MANUAL

MANUAL

PUSH

ON

BRIGHTNESS(000~255)CONTRAST(000~255)SHARPNESS(000~255)HUE(000~255)GAIN(000~255)

R-GAIN(000~255)

R-GAIN(000~255)

CONTRAST－LOW MIDLOW MID MIDHIGH HIGH/ / / /

DELAY CNT(000~255)

USER 1

USER 2

ANTI CRMANUAL－LEVEL(000~255)PUSH LOCK

ATW FRAME－x0.50 x1.00 x1.50 x2.00/ / /

ENVIRONMENT－INDOOR OUTDOOR/

HIGH LUMINANCE

LOW LUMINANCE

MODE－SHUT+AGCSHUTTER－1/60(1/50) 1/100(1/120) 1/250~1/10000/ /

AGC－6.00 12.00 18.00 24.00 30.00 36.00 42.00 44.80/ / / / / / /

MODE

MODE－AGC OFF/BRIGHTNESS(000~255)

BRIGHTNESS－x0.25 x0.50 x0.75 x1.00/ / /

AUTO IRIS/ SHUT+AUTO IRIS

SHUT (NOTES＊2)

MODE－AUTO OPEN CLOSE/ /

SPEED(000~255)

TYPE－DC

5

(NOTES＊1)

PRIVACY

NR

CAMERA ID

SYNC－INT

LANGUAGE－ENGLISH　　　　ESPANOL/ 中文

/ 日本語/ DEUTSCH/ FRANCAIS/ PYCCK / PORTUGUES/

OFF

NR MODE－Y/C/ OFF/ Y/ C

OFF

AREA SEL－1/8~8/8ON

Y LEVEL(000~015)

ON

C LEVEL(000~015)

TOP [000~244(NTSC), 000~288(PAL)]BOTTOM [000~244(NTSC), 000~288(PAL)]LEFT [000~474(NTSC), 000~468(PAL)]RIGHT [000~474(NTSC), 000~468(PAL)]COLOR(1~8)TRANSP－0.00 0.50 0.75 1.00/ / /

MOSAIC－OFF ON/

NN^

~

^

CAMERA RESET

6

＊1：The LENS option appear on the SETUP MENU menu, and then set the LENS mode to　　 AUTO on the SETUP MENU menu.＊2：The LENS option disappear on the SETUP MENU menu or set the LENS mode to 　　 MANUAL on the SETUP MENU menu.

NOTES

TO Open and Ex i t the Menu screen

SETTING MENU AND FUNCTIONS

1. Press "SET" but ton.

　The Menu screen appears on the moni tor. Check the current set t ings on the menu.

2. Push　or　but ton to se lect the opt ions then use　or　but ton to se lect a mode.

　 NEXT: To the next setup menu.

　 BACK: Return to the prev ious.

　 RETURN: Return to the prev ious.

　 SAVE ALL: Used to save the var ious set t ing of the in terna l OSD menu in the

　 EEPROM together.

　 EXIT: Ex i t the setup menu.

SETUP MENU

AUTOAUTOATWBLC

OFFOFF

LENSSHUTTER/AGCWHITE BALBACKLIGHTPICT ADJUSTATRPRIVACY

NEXTEXIT　　　　　SAVE ALL

SETUP MENU

OFFINTENGLISH

NRCAMERA IDSYNCLANGUAGECAMERA RESET

BACKEXIT　　　　　SAVE ALL

LENS

This funct ion is used to set the mechanica l i r is o f the lens.

1. Select [LENS] opt ion.

2. Push　or　but ton to se lect a mode.

　LENS mode changes as fo l lows:

　AUTO: Select the auto i r is lens.

　MANUAL: Select the manual i r is lens.

3. Select an AUTO then press "SET" but ton.

　The AUTO IRIS menu appears.

AUTO → MANUAL

AUTO IRIS

DCAUTO 080

TYPEMODESPEED

RETURN

7

AUTO (AUTO IRIS)

FUNCTION OPTION DESCRIPTION

TYPE

SPEED

MODE

DC

000~255

AUTO

OPEN

CLOSE

Sets the type of mechanica l i r is .

DC: Di rect dr ive s ignal .

Sets the convergence speed of the

mechanica l i r is .

Sets the type of cont ro l to be exerc ised over

the mechanica l i r is .

AUTO: The mechanica l i r is is cont ro l led

　　 automat ica l ly.

OPEN: The mechanica l i r is is f ixed to open.

CLOSE: The mechanica l i r is is f ixed to c lose.

1. Without LENS option in the CMR7484X/7488X2.2N/P & CMR7484X/7488X2.5N/P.2. Only DC mode on the TYPE option. Because a DC auto iris lens is used with the　CMR7484X/7488X2.4N/P & CMR7484X/7488X3.6N/P.

NOTES

SHUTTER/AGC

This funct ion is used to set AE(Auto Exposure) or ME(Manual Exposure) .

1 . Select [SHUTTER/AGC] opt ion.

2. Push　or　but ton to se lect an AUTO or MANUAL, then press "SET" but ton.

　The AUTO SETUP or MANUAL SETUP menu appears.

　SHUTTER/AGC mode changes as fo l lows:

　AUTO: Select the AE cont ro l .

　MANUAL: Select the ME cont ro l .

AUTO → MANUAL

AUTO SETUP

SHUT+AUTO IRIS 024

AGCx0.50

HIGH LUMINANCE

BRIGHTNESS

LOW LUMINANCEMODEBRIGHTNESS

RETURN

MODE

8

AUTO SETUP

SHUT 024

AGCx0.50

HIGH LUMINANCE

BRIGHTNESS

LOW LUMINANCEMODEBRIGHTNESS

RETURN

MODE

9

AUTO (AE)


HIGH

LUMINANCE

AUTO IRIS

SHUT+AUTO IRIS

1. The LENS opt ion appear on the SETUP

　MENU menu, and then set the LENS mode to

　AUTO on the SETUP MENU menu.

2. Speci f ies AE cont ro l on the medium and h igh

　br ightness s ide.

AUTO IRIS: F ixed e lect ron ic shut ter.

　　　　 [1 /60sec. (NTSC), 1 /50sec. (PAL) ]

SHUT+AUTO IRIS: Auto e lect ron ic shut ter.

　　　　[1 /60sec. (1 /50sec. )~1/100,000sec. ]

MODE

SHUT

000~255

1. The LENS opt ion d isappear on the SETUP

　MENU menu or set the LENS mode to

　MANUAL on the SETUP MENU menu.

2. Speci f ies AE cont ro l on the medium and h igh

　br ightness s ide.

SHUT: Auto e lect ron ic shut ter.

　　 [1 /60sec. (1 /50sec. )~1/100,000sec. ]

Speci f ies the medium and h igh br ightness s ide

reference.

BRIGHTNESS

LOW

LUMINANCE

AGC

OFF

Speci f ies AE cont ro l on the low br ightness s ide.

AGC: AGC ON

OFF: AGC OFF

MODE

x0.25

x0.50

x0.75

x1.00

Speci f ies the low br ightness s ide re ference.BRIGHTNESS

Set t ing of shut ter speed of AUTO IRIS mode

Please set -up proper shut ter speed for AUTO IRIS mode as be low:

SHUTTER/AGC: AUTO[SETUP MENU] → SET MODE: AUTO IRIS[AUTO SETUP]

→ RETURN → SHUTTER/AGC: MANUAL[SETUP MENU] → SET → SHUTTER:

1/60(1/50) or 1 /100(1/120) or 1 /250. . . . . [MANUAL SETUP] → RETURN → SHUTTER/

AGC: AUTO[SETUP MENU] → SAVE ALL → SET → EXIT

→

MANUAL (ME)


MODE SHUT+AGC "SHUT+AGC" is the on ly opt ion avai lab le for

the ME operat ion mode. There are no other

opt ions.

MANUAL SETUP

SHUT+AGC1/606.00

MODESHUTTERAGC

RETURN

AGC

SHUTTER

6.00

12.00

18.00

24.00

30.00

36.00

42.00

44.80

1/60(NTSC), 1 /50(PAL)

1/100(NTSC), 1 /120(PAL)

1/250

1/500

1/1000

1/2000

1/4000

1/10000

Sets the AGC value(dB) for ME.

Sets the ME shut ter speed( in f ract ions of a

second) .

Please select AUTO mode on the SHUTTER/AGC option. If you select MANUAL mode, theover exposure may occur.

NOTE

10

WHITE BAL (WHITE BALANCE)

This funct ion is used to set the whi te ba lance operat ion mode.

1. Select [WHITE BAL] opt ion.


　WHITE BAL mode changes as fo l lows:

ATW → PUSH USER1 USER2 ANTI CR

PUSH LOCK ← MANUAL

→ → →

ATW

239 016x1.00INDOOR

SPEEDDELAY CNTATW FRAMEENVIROMENT

RETURN

ATW (Auto Track ing Whi te ba lance)

This funct ion automat ica l ly t racks the changes in the co lor temperature, and

adjusts the whi te ba lance.

The co lor temperatures ranging f rom 1800K to 10500K.


SPEED

DELAY CNT

000~255

000~255

Adjusts the pu l l - in speed of ATW.

Sets the t ime-based hysteres is o f ATW.

11

ATW FRAME

ENVIROMENT

x0.50

x1.00

x1.50

x2.00

INDOOR

OUTDOOR

Sets the pu l l - in f rame magni f icat ion.

Sets the pu l l - in f rame( indoor /outdoor) o f ATW.

INDOOR: Select the indoor pu l l - in f rame.

OUTDOOR: Select the outdoor pu l l - in f rame.

PUSH (Ful l pu l l - in)

This funct ion ad justs the whi te ba lance regard less of the subject condi t ions.

USER2 WB

045 026

B-GAINR-GAIN

RETURN

USER1 WB

029 034

B-GAINR-GAIN

RETURN

USER1

The gain va lues for the outdoor f ixed mode are used as the ad justment i tems

of USER1 on the in terna l OSD menu.

12

USER2

The gain va lues for the f luorescent l ight f ixed mode are used as the ad justment

i tems of USER2 on the in terna l OSD menu.


B-GAIN

R-GAIN

000~255

000~255

Used for the B ga in operat ion in the WB f ixed

gain mode.

Used for the R gain operat ion in the WB f ixed

gain mode.

ANTI CR (Color Rol l ing suppress ion)

This funct ion min imizes the co lor changes(co lor ro l l ing) over long per iods

caused by very smal l d i f ferences between the f l icker f requency of non- inver ter

f luorescent l ights and the dr ive f requency of the image sensor dev ices.

MANUAL (Manual WB)

The B and R gain va lues for manual WB are set on th is screen.

MANUAL WB

058LEVEL

RETURN


LEVEL 000~255 Sets the B and R gain va lues for manual WB.

By increment ing or decrement ing the B ga in

va lue, the R gain va lue is a lso ad justed in

tandem.

PUSH LOCK (Hold)

The WB gain leve l estab l ished when operat ion has t ransfer red to the PUSH

LOCK mode is he ld .

1 . Push　or　but ton to se lect [PUSH LOCK] Mode then press "SET" but ton.

13

BACKLIGHT (BACKLIGHT Compensat ion)

This funct ion is used to set the back l ight compensat ion operat ion.

1. Select [BACKLIGHT] opt ion.


　BACKLGIHT mode changes as fo l lows:

　BLC: Back l ight compensat ion ON.

　HLC: HLC(High L ight Compensat ion) funct ion ON

　　　High L ight Compensat ion(HLC) is a funct ion

　　　that improves the v isual recogni t ion of

　　　l i cense p la tes and other such ob jects by suppress ing or mask ing s t rong

　　　hight sources(such as the headl ights o f automobi les) in dark p laces.

　OFF: Back l ight Compensat ion OFF.

BLC → HLC OFF→

SETUP MENU

AUTOAUTOATW

OFFOFF

BLC

LENSSHUTTER/AGCWHITE BAL

PICT ADJUSTATRPRIVACY

NEXTEXIT　　　　　SAVE ALL

BACKLIGHT

PICT ADJUST (PICTURE ADJUST)

1. Select [PICT ADJUST] opt ion and press "SET"

　but ton. The PICT ADJUST menu appears.

2. Push　or　but ton to se lect a mode or set the

　funct ion leve l (000~255) .

　PICT ADJUST mode changes as fo l lows:

MIRROR → BRIGHTNESS CONTRAST

GAIN ← HUE ← SHARPNESS

→

PICT ADJUST

OFF 000 128 128 128 128

MIRRORBRIGHTNESSCONTRASTSHARPNESSHUEGAIN

RETURN


BRIGHTNESS

CONTRAST

SHARPNESS

HUE

GAIN

MIRROR

000~255

000~255

000~255

000~255

000~255

OFF

ON

Sets the screen br ightness.

Sets the screen cont rast .

Sets the screen sharpness.

Adjusts the hue.

Adjusts the ga in .

Sets the hor izonta l f l ip for the d isp lay output .

OFF: Normal output .

ON: Hor izonta l f l ipped output

ATR (Adapt ive Tone Reproduct ion)

The ATR(Adapt ive Tone Reproduct ion) funct ion prov ides gradat ion compensat ion to

improve the cont rast o f sub jects whose gradat ion has been lost in cases where, for

ins tance, both low- louminance areas and h igh- luminance areas ex is t in the same

pic ture.

1. Select [ATR] opt ion.

2. Push　or　but ton to se lect a ON and press "SET"

　but ton. The ATR menu appears.

3. Push　or　but ton to set the luminance leve l and

　contrast leve l .

　LUMINANCE leve l changes as fo l lows:

　CONTRAST leve l changes as fo l lows:

LOW → MID HIGH→

ATR

LOWLOW

LUMINANCECONTRAST

RETURN

LOW → MIDLOW MID MIDHIGH HIGH→ → →

14


LUMINANCE

CONTRAST

LOW

MID

HIGH

LOW

MIDLOW

MID

MIDHIGH

HIGH

Sets the extent o f the luminance compress ion.

Sets the extent o f the cont rast enhancement .

This funct ion is used to set up to e ight pr ivacy masks.

1. Select [PRIVACY] opt ion.

2. Push　or　but ton to se lect a ON and press

　"SET" but ton. The PRIVACY menu appears.

3. Push　or　but ton to se lect a mode or set the

　mask f rame pos i t ion.

PRIVACY

PRIVACY

1/8 020 070 020 09081.00OFF

AREA SEL TOP BOTTOM LEFT RIGHTCOLORTRANSPMOSAICRETURN

15


AREA SEL

TOP

BOTTOM

LEFT

RIGHT

1/8, 2 /8 , 3 /8 , 4 /8 ,

5 /8 , 6 /8 , 7 /8 , 8 /8 ,

000~244(NTSC)

000~288(PAL)SI

000~244(NTSC)

000~288(PAL)SI

000~474(NTSC)

000~468(PAL)SI

000~474(NTSC)

000~468(PAL)SI

Selects the mask f rame to be ad justed.

Sets the top s ide of the mask f rame se lected

by the AREA SEL parameter.

Sets the bot tom s ide of the mask f rame

selected by the AREA SEL parameter.

Sets the le f t s ide of the mask f rame se lected


Sets the r ight s ide of the mask f rame se lected


COLOR 1~8 Sets the co lors o f the mask f rames.

TRANSP

MOSAIC

0.00

0.50

0.75

1.00

OFF

ON

Sets the t ransparency ra t io o f the mask f rames.

The same t ransparency ra t io va lue is set for

a l l the mask f rames.

Sets the mask f rame mosaic funct ion to ON or

OFF.

OFF: Mosaic funct ion OFF.

ON: Mosaic funct ion ON.

NR (Noise Reduct ion)

This funct ion is used to set the no ise reduct ion.

1. Select [NR] opt ion and press "SET" but ton.

　The NR menu appears.

2. Push　or　but ton to se lect one of four modes

　for NR or set the d i f ferent f i l te r s t rength.

　NR mode changes as fo l lows:

NR

Y/C 004 004

NR MODEY LEVELC LEVEL

RETURNY/C → OFF Y C→ →


NR MODE Y/C

OFF

Y

C

Sets the 2D NR f i l ter mode.

Y/C: Y and C f i l ters ON.

OFF: Through

Y: Y f i l ter ON.

C: C f i l ter ON.

Y LEVEL

C LEVEL

000~015

000~015

Sets the Y f i l ter s t rength.

Sets the C f i l ter s t rength.

16

CAMERA ID

This funct ion is used to set the camera ID.

1. Select [CAMERA ID] opt ion.

2. Use　or　but ton to se lect a ON and press "SET" but ton. The CAMERA ID menu

　appears.

CAMERA ID

RETURN

A

(

W

B

)

X

C

_

Y

D

、Z

E

,

0

F

￥1

G

：

2

H

；

3

I

<

4

J

=

5

K

>

6

L

?

7

M

@

8

N

9

O

^

-

P

＊

!

Q

．

"

R

x

#

S

+

$

T

/

%

U

&

V

'￥

CHR1　　CHR2

CLR　POS

CAMERA ID

RETURN

大門廳走道倉庫口安全樓梯園電巷路區室地防火左

右鄰里弄號辦公攝影機前後側房廠車段村

CHR1　　CHR2

CLR　POS

1

3. Use　,　,　or　but ton to se lect a le t ter, numera l or symbol .

　＊ (B lank) : Inser ts a space at the cursor pos i t ion.

　＊CHR1: Let ters A to Z, numera ls 0 to 9 , symbols .

　＊CHR2: 40 t rad i t ional Chinese.

　＊　　 : Moves cursor to le f t , r ight , up or down.

　＊CLR: I f you enter the wrong code, se lect CLR then press "SET" but ton.

　＊POS: Use　,　,　or　but ton to move pos i t ion of CAMERA ID on the screen.

1

SYNC

This funct ion is used to d isp lay the current synchronizat ion mode. The SYNC mode

is f ixed to the INT( In terna l synchronizat ion) .

SETUP MENU

OFF

ENGLISHINT

NRCAMERA ID

LANGUAGECAMERA RESET


SYNC

17

CAMERA RESET

This funct ion is in i t ia l izes a l l the in terna l OSD menu set t ing together.

1 . Select [CAMERA RESET] opt ion.

2. Press "SET" but ton to reset the camera set t ing to in i t ia l set t ing.

3. Select [SAVE ALL] opt ion on the [SETUP MENU] menu. Press "SET" but ton.

SETUP MENU

OFFINTENGLISH

NRCAMERA IDSYNCLANGUAGE


CAMERA RESET

LANGUAGE

This funct ion is used to se lect the language in which to d isp lay the in terna l OSD

menu.

1. Select [LANGUAGE] opt ion.

2. Push　or　but ton to se lect a language.

SETUP MENU

OFFINTENGLISH

NRCAMERA IDSYNC

CAMERA RESET


LANGUAGE

Model No.

Lens

Power Input Vol tage

System

Sync. Mode

Menu Contro l

P ick Up Element

Effect ive Pixe ls

Chip Size

Hor izonta l & Ver t ica l

Sync. Frequency

Scanning System

Resolut ion

Min imum I l luminat ion

Shut ter

Adapt ive Tone

Reproduct ion

S/N Rat io

Auto Gain Contro l

Whi te Balance

Noise Reduct ion

Pic ture Adjust

Pr ivacy Masking

Pr ivacy Masking Zone

OSD Language

Power Consumpt ion

Back L ight Compensat ion

Video Output

Operat ing Temperature

Gamma Character is t ic

IP Rat ing

Window

Inf rared

LEDBeam Spread

Peak Wavelength

Focal Length

I r is

Angle of v iew

H

Auto

Luminance

V

Manual

Contrast

D

CMR7484X2.2N/P

0.045Lux / F1.4, 0Lux ( IR ON)

1/60(1/50)S ~ 1/100,000S

LOW / MID / HIGH

1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S

LOW / MIDLOW / MID / MIDHIGH / HIGH

NTSC or PAL

AC24V ( 10%)±

In terna l

OSD Contro l

1 /3" Exv iew HAD CCD Sensor

976(H) x 494(V) [NTSC]

976(H) x 582(V) [PAL]

5.58mm(H) x 4 .67mm(V)

15.734 KHz / 59.94Hz [NTSC]

15.625 KHz / 50Hz [PAL]

2:1 In ter lace

700TV L ines

More Then 50dB (AGC-OFF)

AUTO / MANUAL

ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

Y / C / Y/C / OFF

MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN

ON / OFF

8 Zones

ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE

9.5W

BLC / HLC(High L ight Compensat ion) / OFF

IP66

ψ92 Heat Resistant Glass

850nm

30°

CVBS 1.0Vp-p, 75ohm

-10 ~ +50℃ ℃ (14℉ ~ 122℉)

γ=0.45

D/N ATR 700TVL VARI-FOCAL IR CAMERA

SPECIFICATIONS

AC100~240V

4 ~ 9mm

F1.4

69 ~ 30.7° °

51 ~ 23° °

86 ~ 38.5° °

Radiant Dis tance

Dimension

Weight

50M

Body:121.5mm(W) x 109mm(H) x 231mm(D), Bracket : 160mm(L)

1500g

Design and spec i f icat ions are subject to change wi thout not ice.

18

CMR7484X2.5N/P CMR7488X2.2N/P CMR7488X2.5N/P

8 ~ 20mm 4 ~ 9mm 8 ~ 20mm

33 ~ 14.5° °

25 ~ 11° °

41.5 ~ 18.2° °

69 ~ 30.7° °

51 ~ 23° °

86 ~ 38.5° °

33 ~ 14.5° °

25 ~ 11° °

41.5 ~ 18.2° °

12W

Model No.

Lens

Power Input Vol tage

System

Sync. Mode

Inf rared Cut F i l ter

Menu Contro l

P ick Up Element

Effect ive Pixe ls

Chip Size

Hor izonta l & Ver t ica l

Sync. Frequency

Scanning System

Resolut ion

Min imum I l luminat ion

Shut ter

Adapt ive Tone

Reproduct ion

S/N Rat io

Auto Gain Contro l

Whi te Balance

Noise Reduct ion

Pic ture Adjust

Pr ivacy Mask ing

Pr ivacy Mask ing Zone

OSD Language

Power Consumpt ion

Back L ight Compensat ion

Video Output

Operat ing Temperature

Gamma Character is t ic

IP Rat ing

Window

Inf rared

LEDBeam Spread

Peak Wavelength

Focal Length

I r is

Angle of v iew

H

Auto

Luminance

V

Manual

Contrast

D

CMR7484X3.6N/P

0.045Lux / F1.4

0.009Lux / F1.4

0Lux

1/60(1/50)S ~ 1/100,000S

LOW / MID / HIGH

1/60(1/50)S, 1/100(1/120)S, 1/250S, 1/500S, 1/1,000S, 1/2,000S, 1/4,000S, 1/10,000S

LOW / MIDLOW / MID / MIDHIGH / HIGH

NTSC or PAL

AC24V ( 10%)±

In terna l

Auto Selectab le , Automat ic Swi tch From Color Mode to Monochrome

OSD Contro l

1 /3" Exv iew HAD CCD Sensor

976(H) x 494(V) [NTSC]

976(H) x 582(V) [PAL]

5.58mm(H) x 4 .67mm(V)

15.734 KHz / 59.94Hz [NTSC]

15.625 KHz / 50Hz [PAL]

2:1 In ter lace

Color : 700TV L ines, Mono: 750TV L ines

More Then 50dB (AGC-OFF)

AUTO / MANUAL

ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

Y / C / Y/C / OFF

MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN

ON / OFF

8 Zones

ENGLISH/JAPANESE/GERMANS/FRENCH/RUSSIAN/PORTUGUESE/SPANISH/SIMPLY CHINESE

9.5W

BLC / HLC(High L ight Compensat ion) / OFF

IP66

ψ92 Heat Resistant Glass

850nm

30°

CVBS 1.0Vp-p, 75ohm

-10 ~ +50℃ ℃ (14℉ ~ 122℉)

γ=0.45

D/N ATR 700TVL VARI-FOCAL IR CAMERA

AC100~240V

3.3 ~ 12mm

F1.4

89.8 ~ 23.9° °

63.6 ~ 17.9° °

125.7 ~ 29.9° °

Radiant Dis tance

Dimension

Weight

50M

Body:121.5mm(W) x 109mm(H) x 231mm(D), Bracket : 160mm(L)

1500g

Design and spec i f icat ions are subject to change wi thout not ice.

66-CMR748CSE-219

CMR7484X2.4N/P CMR7488X3.6N/P CMR7488X2.4N/P

9 ~ 22mm

32.1 ~ 13.1° °

23.3 ~ 9.8° °

41.9 ~ 16.3° °

12W

3.3 ~ 12mm

89.8 ~ 23.9° °

63.6 ~ 17.9° °

125.7 ~ 29.9° °

9 ~ 22mm

32.1 ~ 13.1° °

23.3 ~ 9.8° °

41.9 ~ 16.3° °

Mono

Color

IR On

D/N ATR 700TVL VARI-FOCAL IR CAMERACMR7484X/7488X2.2 N/P & CMR7484X/7488X2.5 N/P & CMR7484X/7488X3.6 N/P

CMR7484X/7488X2.4 N/P

MERIT LILIN ENT. CO., LTDhttp://www.meritlilin.com 66-CMR748CSE

INSTRUCTION MANUAL

Documents

D/N ATR 700TVL VARI-FOCAL IR CAMERA - verrocchio.itFIG.6 4. Next, use the provided M5.0x10 screws (silver-2pcs) to fix the camera body on the bracket with screw driver (FIG.6). 3 5