8/12/2019 victaulic joints
1/2
R
IPS CARBON STEEL PIPE GROOVED COUPLINGS
VICTAULIC IS AN ISO 90 01 CERTIFIED COM PAN
REGISTERED TRADEMARK OF VICTAULIC COPYRIGHT 2003 VICTAULIC
PRINTED IN U.S.A. 1661 REV
06.12
Victaulic Company of America Phone: 1-800-PICK-VIC (1-800-742-
5842) Fax: 610-250-8817 e-mail:[email protected]
Company of Canada Phone: 905-884-7444 Fax: 905-884-9774 e-mail:
[email protected] Europe Phone:32-9-381- 1500 Fax:
32-9-380-4438 e-mail: [email protected]
Victaulic America Latina Phone: 610-559-3300 Fax: 610-559-3608
e-mail: [email protected] Asia Pacific Phone:
65-6235-3035 Fax: 65-6235-0535 e-mail: [email protected]
Style HP-70 Rigid Coupling
PRODUCT DESCRIPTION
Style H P-70 is designed with a heavy housing for high pressure
service. The housing key is wider than
standard and the coupling housing is designed to clamp the
bottom of the groove, thus providing an
essentially rigid joint. It also eliminates movement at the
joint. T o achieve this rigidity it is necessary to
torque the nuts on sizes 2 - 4" (50 - 100 mm) to 60 - 80 ft.
lbs. (80 - 110 N m) . T he nuts on the 14 and 16"(350 and 400 mm)
sizes are torqued to 600 and 700 ft. lbs. ( 810 and 950 N m) ,
respectively. A ll other
sizes must be bolted securely metal-to-metal.
HP-70 will greatly reduce linear or angular movement and is
useful for valve connections and other points
where rigid ity is required. The coupling is provided with
plated bolts and nuts and standard C -cross
section gasket.
DIMENSIONS
2 - 16" (50 - 400 mm) Sizes
ULCUL
FM
See Victaulicpublication 10.01
for details.
X
Y Z
Y Z
X
2 - 12" Sizes
14 & 16" Sizes
Pipe Size Max.
WorkPress.PSI*kPa
Max.EndLoadLbs.*
N
Allow.Pipe
End #Sep.
In./mm
@Bolt/Nut
No. - SizeInches
mm
DimensionsInches/millimeters
Aprx.WeightEachLbs.kg
NominalDiameterIn./mm
ActualOut. Dia.In./mm X Y Z
2 2.375 1,000 4430 0.142 -
5
/
8
X 2
3
/
4
3.50 6.68 2.00 3.2
50 60,3 6900 19715 3,6 89 168 51 1,5
2
1
/
2
2.875 1,000 6490 0.142 -
5
/
8
X 3
1
/
2
4.13 7.13 2.00 4.0
65 73,0 6900 28881 3,6 105 181 51 1,8
3 3.500 1,000 9620 0.142 -
5
/
8
X 3
1
/
2
4.75 7.75 2.00 4.4
80 88,9 6900 42810 3,6 121 197 51 2,0
4 4.500 1,000 15900 0.252 -
3
/
4
X 4
1
/
4
6.00 9.63 2.13 7.5
100 114,3 6900 70755 6,4 152 245 54 3,4
6 6.625 1,000 34470 0.252 -
7
/
8
X 5
1
/
2
8.63 12.68 2.50 16.0
150 168,3 6900 153390 6,4 219 321 64 7,3
8 8.625 800 46740 0.252 - 1 X 5
1
/
2
11.00 15.00 2.75 26.1
200 219,1 5500 207995 6,4 279 381 70 11,8
10 10.750 800 72640 0.252 - 1 X 6
1
/
2
13.50 17.25 3.00 32.8
250 273,0 5500 323250 6,4 343 438 76 14,9
12 12.750 800 102000 0.252 - 1 X 6
1
/
2
15.63 19.13 3.13 46.0
300 323,9 5500 453900 6,4 397 486 80 20,9
14 14.000 600 92360 0.254 - 1
1
/
4
X 4
1
/
2
16.75 22.00 3.88 64.0
350 355,6 4100 410800 6,4 425 559 99 29,0
16 16.000 600 120600 0.254 - 1
1
/
4
X 4
1
/
2
18.75 24.13 3.88 72.0
400 406,4 4100 536400 6,4 476 613 99 32,7
These sizes are not UL Listed or FM Ap proved.
See notes below
NOTES* Working Pressure and End Load are total, from all
internal and external loads, based on standard weight steel pipe,
standard rollor cut grooved in accordance with
Victaulicspecifications. C ontact Victaulic for performance on
other pipe.
WAR NIN G : FO R O NE T IM E FIELD TEST O NLY , the M aximum
Joint Working Pressure may be increased to 11/2times the figures
shown.
# For field installation only. H P-70 couplings when
sufficiently pressurized, will allow pipe ends to separate to maxi
mum point shown before joint acts in a fully restrainedmanner.
@ Number of bolts required equals number of housing segments.M
etric thread size bolts are availab le (color coded gold) for all
coupling sizes upon request. C ontact Victaulic for details.
WA R NI N G : D epressurize and drain the piping system before
attempting to install, remove, or adjust any Victaulic piping p
roducts.
8/12/2019 victaulic joints
2/2
2 Style HP-70 R igid C oupling
06.12
MATERIAL SPECIFICATIONS
Housing: Ductile iron conforming to ASTM A -395, grade 65-45-15,
and A ST M A -536, grade 65-45-12.
Housing Coating:
O range enamel
Optional:
Hot dipped galvanized and others
Gasket:
(Specify choice*)
Grade E EPDM
EPD M (G reen color code). T emperature range 30F to + 230F (34C
to +110C) . R ecommended for
cold and hot water service within the specified temperature
range p lus a variety of dilute acids, oil-free
air and many chemical services. U L classified to AN SI /NSF 61
for cold +86F (+ 30C ) and hot +180F
(+ 82C) potable water service. NO T REC O M M END ED FO R PET RO
LEUM SERVIC ES.
Grade T nitrile
Nitrile (O range color code). Temperature range 20F to +180F
(29C to +82C ). R ecommended for
petroleum products, air with oil vapors, vegetable and mineral
oils within the specified temperature
range. N ot recommended for hot water services over +150F (+
66C) or for hot dry air over + 140F
(+60C).
*Services listed are G eneral Service R ecommendations only. I t
should be noted that there are services for
which these gaskets are not recommended. R eference should
always be made to the latest Victaulic
G asket Selection G uide for specific gasket service
recommendations and for a listing of services which
are not recommended.
Supplemental lubricant is recommended for services installed at
or continuously operating below 0F
(18C ).
Bolts/Nuts:
Heat treated carbon steel plated, track-head, conforming to
physical properties of AST MA -183 minimum tensile 110,000 psi
(758340 kP a) . Z inc plated to ASTM B-633.
Exaggerated for clarity
This p roduct shall be manufactured by V ictaulic C ompany. All
products to be installed in accordance with current Victaulic
installation/assembly instructions.Victaulic reserves the right to
change product specifications, designs and standard eq uipment
without notice and without incurring obliga tions.
