Victaulic PriceList 2010-Main

VICTAULIC

WORLD HEADQUARTERS

P.O. Box 31Easton, PA 18044-0031 USA

4901 Kesslersville RoadEaston, PA 18040 USA

1-800-PICK-VIC(1-800-742-5842)1-610-559-33001-610-250-8817 (fax)[email protected]

www.victaulic.com

UNITED STATES

P.O. Box 31Easton, PA 18044-0031

1-610-559-33001-610-250-8817 (fax)[email protected]

CENTRAL AND SOUTH AMERICA

P.O. Box 31Easton, PA 18044-0031 USA

4901 Kesslersville RoadEaston, PA 18040 USA

1-610-559-33001-610-559-3608 (fax)[email protected]

4901 Kesslersville RoadEaston, PA 18040 USA 2010

Main

General Price List

UPdated 4/2010 PL2010-MaIN 1616 rev UVictaulic is a registered trademark of Victaulic company. © 2010 Victaulic company. all rights reserVed.

www.victaulic.comthe Victaulic website is an information resource that can help you with your piping projects. among the many resources available at the site:

• fully searchable product and project databases • free product submittals • free product literature • piping software demos and modules • information on new product innovations • support services, and more...

2010Main

effectIve aPrIL 19, 2010

General Price List

Piping. Systems. Solutions.

SECTION 1 – Couplings and Fittings

Style 107H QuickVic® Rigid Coupling for Steel

Style 07 Zero-Flex® Rigid Coupling

Style W07 AGS Rigid Coupling

Style 177 QuickVic Flexible Coupling for Steel

Style 77 Standard Coupling

Style W77 AGS Flexible Coupling

Style 770 Large Diameter Coupling

Style 75 Flexible Coupling

Style 750 Reducing Coupling

Style 741 Vic-Flange® Adapter

Style W741 AGS Vic-Flange Adapter

Style 743 Vic-Flange Adapter

Style 72 Outlet Coupling

Styles 791 and 792 Vic-Boltless® Coupling

Style 78 Snap-Joint® Coupling

Style HP-70 Rigid Coupling

Style HP-70ES High Pressure EndSeal® Coupling

Style 307 AWWA to IPS Transition Coupling

IPS Size Grooved End Fittings

AGS (Advanced Groove System) Grooved End Fittings

Extra Heavy “ES” EndSeal Fittings

Style 47 Clearflow Dielectric Waterway

Style 47-GG Steel (IPS) to Copper (CTS) Transition Fitting

SECTION 2 – Hole Cut Products

Style 920/920N Mechanical-T® Outlet

Vic®-Tap II Hot Tap

Style 920/920N Mechanical-T Cross

Style 923 Vic-Let™ Strapless Outlet

Style 924 Vic-O-Well™ Thermometer Outlet

SECTION 3 – Valves and Specialties

Vic-300 MasterSeal Butterfly Valve

Vic-300 (300 psi) AGS Butterfly Valve

Series 706 (300 psi) Large Diameter High Pressure Butterfly Valve

Series 700 Butterfly Valve

Series 721 Grooved End Ball Valve

Series 726 Vic-Ball® Valve

Series 722 Threaded Ball Valve

Series 712 Swinger® Check Valve

Series 713 High Pressure Swinger Check Valve

Series 761H/716 Vic-Check® Valve

Series 779 Venturi Check Valve

Style 739 Master Meter

Series W715 AGS Check Valve

Series 377 Balancing Plug Valve

Series 318 Sump Ejector Kit

Series 731-D Suction Diffuser

Series W731-I AGS Suction Diffuser

Series 730 Vic-Strainer® Tee Type Strainer

Series W730 AGS Vic-Strainer Tee Type

Series 732 Vic-Strainer Wye Type Strainer

Series W732 AGS Wye-Type Strainer

Style 150 Mover® Expansion Joint

SECTION 4 – Circuit Balancing Valves

TA Series 786 STAS – Solder End – 300 psi

TA Series 787 STAD – NPT (Fem.) End – 300 psi

Series 78K STADK Balancing Valve

TA Series 788 STAF – Flanged End – 250 psi

TA Series 789 STAG – Grooved End – 350 psi

Kits

Spare Parts

TA Series 793 Differential Pressure Controller

TA Series 794 Differential Pressure Controller

Differential Pressure Controller Accessories

Series 78Y Strainer/Ball Valve Combination

Series 78U Union Port Fitting

Coil Component Accessories

TA Series 736 TA Link Differential Pressure Sensor

1

Index

www.vIctaULIc.coM PL2010-MaIN

INd

eX�

Universal Gauge Meter Conversion Kit

TA Series 73M TA CMI

SECTION 5 – Plain End Products

Style 99 Roust-A-Bout® Coupling

Adapter Nipples

Plain End Fittings

SECTION 6 – Pressfit® System Products

Pressfit System - Plain End System for Schedule 5, Type 304 Stainless Steel Piping

Pressfit System - Plain End System for Schedule 5, Type 316 Stainless Steel Piping

SECTION 7 – HDPE Products

Style 995 HDPE Coupling

Style 994 HDPE Flange Adapter

Style 997 HDPE-to-Steel Transition Coupling

SECTION 8 – Copper Connection

Style 607 QuickVic Rigid Coupling for Copper

Style 622 Copper Mechanical-T Bolted Branch Outlet

Style 622 Copper Mechanical-T Cross

Style 641 Copper Flange Adapter

Grooved End Copper Fittings

Series 608 Copper Butterfly Valve

SECTION 9 – PermaLynx

PermaLynx Copper Couplings

PermaLynx Copper Fittings

PermaLynx Valves

PermaLynx Pipe Preparation Tool

SECTION 10 – Aluminum Products

Style 77A Flexible Coupling for Aluminum Pipe

Style 78A Snap-Joint for Aluminum Pipe

Grooved End Aluminum Fittings

SECTION 11 – Stainless Steel Products

Style 89 Ductile Iron Coupling for Stainless Steel Pipe

Style W89 AGS Rigid Coupling

Style 489 Rigid Stainless Steel Coupling

Style 475 Flexible Stainless Steel Coupling

Style 77-S Flexible Stainless Steel Coupling

Style 441 Stainless Steel Vic-Flange Adapter

No. 45S Stainless Steel Flange Adapter (Van Stone Type)

Standard Schedule 10S Type 304L and Type 316L Stainless Steel Fittings

Series 763 Stainless Steel Butterfly Valve

Series 726-S Stainless Steel Grooved End Ball Valve

Series 712-S Stainless Steel Check Valve

SECTION 12 – Large Diameter Products

Style 22 Coupling for Vic-Ring System




SECTION 13 – Pipe Preparation Tools

VE12 Groove-In-Place

VE26 S/C/SS/P Groove-In-Place

VE26/VE46 Power Drive Kit

VE46/P Groove-In-Place

VE226 B/S/M/C/BSS/MSS/P Portable Groover

VE226 Power Drive Kit

VE106 Groove-N-Go

VE272SFS Field Roll Grooving Tool

VE270FSD Field Roll Grooving Tool

VE416FSD/417FSD Field Roll Grooving Tool

VE416FS Field Roll Grooving Tool

VE450FSD Field Roll Grooving Tool

VE268 Shop Fabrication Grooving Tool

VE414MC Shop Fabrication Grooving Tool

VE460 Shop Fabrication Grooving Tool

VPD752 Victaulic Power Drive

VAPS 112 Pipe Stand

VAPS 224 Pipe Stand

VAPS 1672 Pipe Stand

VE436MC Quick Change Slide Conversion Kit

VG28GD Gear Drive Cut Grooving Tool

VG824 Cut Grooving Tool

www.vIctaULIc.coM PL2010-MaIN2

Index IN

de

X�

VG828 Cut Grooving Tool

VG412 Orbital Grooving Tool

VG Cut Grooving Tool

Power Mule External Power Source

PT-100 Go/No-Go Grooved Pipe Diameter Tape

Tool Carry Bag

VPG26 Cut Grooving Tool for Plastic Pipe

VPG824 Cut Grooving Tool for Plastic Pipe

VHCT 900 Hole Cutting Tool

HCT908 Hole Cutting Tool

Vic-Tap II Hot Tap

PFT505 Pressfit Tool

PFT509 Pressfit Tool

VCT1 Cut Off Tool - Manual

VCT2 Cut Off Tool - Automatic

NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.

submitted By: __________________________________ date: __________________________________

approved By: ___________________________________ date: __________________________________

3

Index


INd

eX�


GeNeraLtable of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5gasket selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

SectIoN 1 – couplings & fittingsstyle 107h QuickVic rigid coupling . . . . . . . . . . . . . . . . . . . 12style 07 Zero-flex® rigid coupling . . . . . . . . . . . . . . . . . . . . 12ags style W07 rigid coupling . . . . . . . . . . . . . . . . . . . . . . . 14style 177 QuickVic flexible coupling . . . . . . . . . . . . . . . . . . . 15style 77 standard flexible coupling . . . . . . . . . . . . . . . . . . . 15ags style W77 flexible coupling . . . . . . . . . . . . . . . . . . . . . 17style 770 large diameter coupling . . . . . . . . . . . . . . . . . . . . 18style 75 flexible coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . 19style 750 reducing coupling . . . . . . . . . . . . . . . . . . . . . . . . 20style 741 Vic-flange® adapter . . . . . . . . . . . . . . . . . . . . . . . . 21style W741 ags Vic-flange adapter . . . . . . . . . . . . . . . . . . . 21style 743 Vic-flange adapter . . . . . . . . . . . . . . . . . . . . . . . . 22style 72 outlet coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23styles 791 & 792 Vic-Boltless® coupling . . . . . . . . . . . . . . . . 24style 791 locking pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24style 78 snap-Joint® coupling . . . . . . . . . . . . . . . . . . . . . . . . 24style hp-70 coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25style hp-70es with “es” gasket . . . . . . . . . . . . . . . . . . . . . . 25style 307 transition coupling . . . . . . . . . . . . . . . . . . . . . . . . 26lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27flange parts – styles 741, W741, 743 & 441 . . . . . . . . . . . . . 29flange gaskets – styles 741, W741, 743 & 441 . . . . . . . . . . . 30metal liners – styles 77, 75 & 78 couplings . . . . . . . . . . . . . 31plated trackhead Bolts & nuts . . . . . . . . . . . . . . . . . . . . . . . 32go-no-go pipe tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32elbows –

no. 10 – 90˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33no. 11 – 45˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33no. W10 – ags 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33no. W11 – ags 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33no. 12 – 221/2˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34no. 13 – 111/4˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34no. W12 - ags 221/2˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34no. W13 - ags 111/4˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34no. 100 & 110 11/2 d long radius elbows . . . . . . . . . . . . . 35no. W100 & W110 11/2 d ags long radius elbows . . . . . . 35

no. r-10g & r-10f reducing Base support elbow . . . . . . . . 36no. 10-dr drain elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36no. 20 tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37no. 29m tee with threaded Branch . . . . . . . . . . . . . . . . . . . 37no. W20 ags tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37no. 35 cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38no. 33 true y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38no. W35 ags cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38no. W33 ags true y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38no(s). 40, 42, & 43 adapter nipples . . . . . . . . . . . . . . . . . . . 39no(s). W42, W43 & W49 ags adapter nipples . . . . . . . . . . . 39

no. 80 female threaded adapter . . . . . . . . . . . . . . . . . . . . . 40no(s). 18 & 19 adapter elbows . . . . . . . . . . . . . . . . . . . . . . . 40no. 25 grooved reducing tee . . . . . . . . . . . . . . . . . . . . . . . 41no. W25 grooved reducing tee . . . . . . . . . . . . . . . . . . . . . . 43no. 29t threaded reducing tee . . . . . . . . . . . . . . . . . . . . . 44no. 50 concentric reducers . . . . . . . . . . . . . . . . . . . . . . . . . 45no. 51 eccentric reducers . . . . . . . . . . . . . . . . . . . . . . . . . . 45no. W50 ags concentric reducers . . . . . . . . . . . . . . . . . . . 47no. W51 ags eccentric reducers . . . . . . . . . . . . . . . . . . . . . 47no.(s) 53, 54 & 55 swaged nipples . . . . . . . . . . . . . . . . . . . 47no. 52 – reducer threaded small end . . . . . . . . . . . . . . . . . 48no. 30 lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49no. W30 ags lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49no. 60 cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50no. W60 ags cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50no. 30r reducing lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . 51no. W30r ags reducing lateral . . . . . . . . . . . . . . . . . . . . . 52no. 32 tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53no. 32r reducing tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . 53no. 61 Bull plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54no. 48 hose nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54no(s). 41, 45 & 46 flanged adapter nipples . . . . . . . . . . . . . 54no. W45 ags flanged adapter nipple . . . . . . . . . . . . . . . . . 553d cast elbows for abrasive services . . . . . . . . . . . . . . . . . . 55long radius elbows – 3d . . . . . . . . . . . . . . . . . . . . . . . . . . . 56long radius elbows – 5d . . . . . . . . . . . . . . . . . . . . . . . . . . . 57long radius elbows – 6d . . . . . . . . . . . . . . . . . . . . . . . . . . . 58extra heavy “es” fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 59style 47 clearflow dielectric Waterway . . . . . . . . . . . . . . . . . 60style 47-gg ips to cts transition fitting . . . . . . . . . . . . . . . . 60

SectIoN 2 – Hole cut Productsstyles 920/920n female threaded mechanical-t® outlet . . . 62styles 920/920n grooved mechanical-t outlet . . . . . . . . . . . 63Vic-tap ii hot tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64styles 920/920n mechanical-t cross . . . . . . . . . . . . . . . . . . 65style 923 Vic-let™ strapless outlet . . . . . . . . . . . . . . . . . . . 68style 924 Vic-o-Well™ one nut thermometer Well . . . . . . . . 68

SectIoN 3 – valves & SpecialtiesVic-300 masterseal® Butterfly Valve . . . . . . . . . . . . . . . . . . . 70Vic-300 (14 - 24”) 300 psi ags Butterfly Valve . . . . . . . . . . . 72series 706 (14 - 24”) 300 psi Butterfly Valve . . . . . . . . . . . . 73series 700 Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .74series 721 grooved end Ball Valve . . . . . . . . . . . . . . . . . . . . .74series 726 grooved end Ball Valve . . . . . . . . . . . . . . . . . . . . 75series 722 threaded Brass Ball Valve . . . . . . . . . . . . . . . . . . 76series 712 swinger® check Valve . . . . . . . . . . . . . . . . . . . . . 76series 713 high pressure check Valve . . . . . . . . . . . . . . . . . 76series 716h/716 Vic-check® Valve . . . . . . . . . . . . . . . . . . . . 77series W715 ags Vic-check® Valve . . . . . . . . . . . . . . . . . . . 78series 779 Venturi check Valve . . . . . . . . . . . . . . . . . . . . . . . 78style 739 s4 / l6 portable master meter . . . . . . . . . . . . . . . . 79series 377 Vic-plug Balancing Valve . . . . . . . . . . . . . . . . . . . 79

5www.vIctaULIc.coM PL2010-MaIN

taB

Le o

f co

NteN

tS

taBLe of coNteNtS

series 318 sump ejector kit . . . . . . . . . . . . . . . . . . . . . . . . . 80series 731-d suction diffuser . . . . . . . . . . . . . . . . . . . . . . . . 81series W731-i ags suction diffuser . . . . . . . . . . . . . . . . . . . 81series 730 Vic-strainer tee type strainer . . . . . . . . . . . . . . . 82series W730 ags Vic-strainer tee type strainer . . . . . . . . . . 82series 732 Vic-strainer Wye type strainer . . . . . . . . . . . . . . . 83series W732 ags Wye-type Vic-strainer . . . . . . . . . . . . . . . . 83style 150 mover expansion Joint . . . . . . . . . . . . . . . . . . . . . . 83

SectIoN 4 – circuit Balancing Productscircuit Balancing Valves

ta series 786 stas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86ta series 787 stad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86series 78k stadk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86ta series 788 staf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87ta series 789 stag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87ta series 786 & 787 insulation kits . . . . . . . . . . . . . . . . . 87ta series 788 & 789 insulation kits . . . . . . . . . . . . . . . . . 88ta series 786 drain kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 88spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

differential pressure controllersta series 793 differential pressure controller . . . . . . . . . . 89ta series 794 differential pressure controller . . . . . . . . . . 89ta series 793 insulation kits . . . . . . . . . . . . . . . . . . . . . . . 89ta differential pressure controller accessories . . . . . . . . . 90

coil componentsseries 78y strainer/Ball Valve combination . . . . . . . . . . . . 91series 78u union port fitting . . . . . . . . . . . . . . . . . . . . . . 91coil component accessories . . . . . . . . . . . . . . . . . . . . . . . 92

Balancing instrumentsta series 736 ta link differential pressure sensor . . . . . . 93universal gauge meter conversion kit . . . . . . . . . . . . . . . . 93ta series 73m ta cmi . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

SectIoN 5 – Plain end couplings & fittingsstyle 99 roust-a-Bout® coupling . . . . . . . . . . . . . . . . . . . . . 96gaskets for style 99 couplings . . . . . . . . . . . . . . . . . . . . . . . 96plated trackhead Bolts & nuts . . . . . . . . . . . . . . . . . . . . . . . 97no.(s) 40-p, 42-p & 43-p adapter nipples . . . . . . . . . . . . . . 97plain end fittings

no. 10-p – 90˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98no. 11-p – 45˚ elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98no. 20-p – tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98no. 61-p – Bull plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98no. 33-p – Wye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99no. 30-p – lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99no. 35-p – cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99no. 53-p – swaged nipple . . . . . . . . . . . . . . . . . . . . . . . 100no. 25-p – reducing tee . . . . . . . . . . . . . . . . . . . . . . . . 100

SectIoN 6 – Pressfit® System ProductsVic-press™ 304

gasket selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102style 500 loose o-rings . . . . . . . . . . . . . . . . . . . . . . . . . 103style 597 standard coupling . . . . . . . . . . . . . . . . . . . . . . 103style 596 male adapter – threaded . . . . . . . . . . . . . . . . 103style 599 female adapter – threaded . . . . . . . . . . . . . . . 104style 590 90˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104style 586 90˚ elbow – short tangent . . . . . . . . . . . . . . . . 104style 591 45˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105style 592 tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105style 593 tee – reducing Branch . . . . . . . . . . . . . . . . . . 105style 588 tee – reducing Branch . . . . . . . . . . . . . . . . . . 106style 594 concentric reducer . . . . . . . . . . . . . . . . . . . . . 106style 595 flange adapter . . . . . . . . . . . . . . . . . . . . . . . . 106style 565 flange adapter . . . . . . . . . . . . . . . . . . . . . . . . 107style 587 transition nipple . . . . . . . . . . . . . . . . . . . . . . . 107series 589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . 107style 584 threaded union . . . . . . . . . . . . . . . . . . . . . . . 108style 582 reducer insert . . . . . . . . . . . . . . . . . . . . . . . . . 108style 561 adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Vic-press 304 pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109pressfit tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Vic-press™ 316gasket selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110style 500 loose o-rings . . . . . . . . . . . . . . . . . . . . . . . . . .111style 507 standard coupling . . . . . . . . . . . . . . . . . . . . . . .111style 508 slip coupling . . . . . . . . . . . . . . . . . . . . . . . . . . .111style 576 male adapter – threaded . . . . . . . . . . . . . . . . . .112series 569 stainless steel Ball Valve . . . . . . . . . . . . . . . . .112series 569 repair kits . . . . . . . . . . . . . . . . . . . . . . . . . . . .112style 570 90˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113style 568 90˚ elbow – short tangent . . . . . . . . . . . . . . . . .113style 571 45˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113style 572 tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114style 573 tee – reducing Branch . . . . . . . . . . . . . . . . . . .114style 574 concentric reducer . . . . . . . . . . . . . . . . . . . . . .114style 575 flange adapter . . . . . . . . . . . . . . . . . . . . . . . . .115style 577 adapter nipple . . . . . . . . . . . . . . . . . . . . . . . . . .115style 578 tee – reducing Branch – threaded . . . . . . . . . .115style 585 threaded union . . . . . . . . . . . . . . . . . . . . . . . .116style 566 flange adapter . . . . . . . . . . . . . . . . . . . . . . . . .116style 579 female adapter – threaded . . . . . . . . . . . . . . . .116style 583 reducer insert. . . . . . . . . . . . . . . . . . . . . . . . . .117pressfit 316 pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117pressfit tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

SectIoN 7 – HdPe Productsstyle 995 hdpe coupling . . . . . . . . . . . . . . . . . . . . . . . . . . 120style 994 hdpe flange . . . . . . . . . . . . . . . . . . . . . . . . . . . 121style 997 hdpe-to-steel transition coupling . . . . . . . . . . . . 121


taB

Le o

f c

oN

teN

tS

taBLe of coNteNtS

SectIoN 8 – copper connection Productsstyle 607 QuickVic rigid coupling for copper . . . . . . . . . . . 124style 622 copper mechanical-t Bolted Branch outlet . . . . . 124style 622 copper mechanical-t cross . . . . . . . . . . . . . . . . . 125style 641 Vic-flange adapter . . . . . . . . . . . . . . . . . . . . . . . 125no. 610 90˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126no. 611 45˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126no. 620 tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126no. 660 cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126reducers

no. 650 grooved x groove . . . . . . . . . . . . . . . . . . . . . . . 126no. 652 grooved x cup . . . . . . . . . . . . . . . . . . . . . . . . . . 127no. 653 grooved x pl . . . . . . . . . . . . . . . . . . . . . . . . . . . 127no. 625 reducing tee (grooved x groove) . . . . . . . . . . . 127no. 626 reducing tee (grooved x cup) . . . . . . . . . . . . . . 128no. 627 grooved x pl . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

series 608 copper system Butterfly Valve . . . . . . . . . . . . . . 129series 608 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

SectIoN 9 – PermaLynx System Productspl600 coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132pl600r coupling (r) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132no. 653 grooved x pl reducer . . . . . . . . . . . . . . . . . . . . . 132pl600-2r fitting coupling (r) . . . . . . . . . . . . . . . . . . . . . . 132pl606 45º elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133pl606-2 45º fitting elbow . . . . . . . . . . . . . . . . . . . . . . . . . 133pl607 90º elbow – short radius . . . . . . . . . . . . . . . . . . . . 133pl607lt 90º elbow – long radius . . . . . . . . . . . . . . . . . . . 134pl607r 90º elbow – short radius (r) . . . . . . . . . . . . . . . . 134pl607-2 90º fitting elbow – short radius . . . . . . . . . . . . . . 134pl611 tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135pl611Bh Bullhead tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135pl611r tee (r) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135no. 627 grooved x pl reducer . . . . . . . . . . . . . . . . . . . . . . 136pl611rr tee (rr) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136pl617 cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136pl707-5 90º drop elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 137pl707-5s 90º drop elbow stubout . . . . . . . . . . . . . . . . . . . 137pl733 union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137pl603 coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138pl603r coupling (r) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138pl604 coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138pl604r coupling (r) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138pl707-3 90º elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139pl707-3-5 90º drop elbow . . . . . . . . . . . . . . . . . . . . . . . . . 139pl707-4 90º elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139pl712 tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140pl733-3 union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140pl733-4 union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140pl771 flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140pl300-sl Ball Valve – standard lever handle . . . . . . . . . . .141pl510 check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141pl7120 supply stop Valve (straight) – Quarter turn handle . . .141

pl7125 supply stop Valve (angled) – Quarter turn handle . . 142pl-prep-s power drive small chamfer & deburr tool . . . . . 142pl-prep-l power drive large chamfer & deburr tool . . . . . 142pl-prepmaX-s drill compatible small chamfer & deburr tool . . 143pl-prepmaX-l drill compatible large chamfer & deburr tool . . 143

SectIoN 10 – aluminum Productsaluminum couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146aluminum fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

SectIoN 11 – Stainless Steel Productsductile iron coupling for stainless steel pipe

style 89 rigid coupling . . . . . . . . . . . . . . . . . . . . . . . . . . 148style W89 rigid coupling . . . . . . . . . . . . . . . . . . . . . . . . 148

stainless steel couplings style 489 rigid coupling . . . . . . . . . . . . . . . . . . . . . . . . . 149style 475 flexible coupling . . . . . . . . . . . . . . . . . . . . . . . 149style 77-s flexible coupling . . . . . . . . . . . . . . . . . . . . . . 150

stainless steel flange adaptersstyle 441 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150no. 45s stainless steel flange adapter . . . . . . . . . . . . . . 150

stainless steel fittings90˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15145˚ elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152concentric reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152eccentric reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153reducing tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

stainless steel Valvesseries 763 Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . 155series 726-s Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . 156series 712-s check Valve . . . . . . . . . . . . . . . . . . . . . . . . 156

SectIoN 12 – Large diameter Productslarge diameter piping solutions . . . . . . . . . . . . . . . . . . . . . 158Vic-ring shouldered Joint check sheet . . . . . . . . . . . . . . . . 159style 22 coupling with type “a” Vic-ring adapters . . . . . . . . . . . . . . . . . . . . . . . . . 160style 31 coupling with type “d” & “e” Vic-ring adapters . . . . . . . . . . . . . . . . . . . . 160style 41 coupling with type “d” & “e” Vic-ring adapters . . . . . . . . . . . . . . . . . . . . 160style 44 coupling with type “d” & “e” Vic-ring adapters . . . . . . . . . . . . . . . . . . . . 160style 41/44 couplings with type “c” Vic-ring adapters . . . . . . . . . . . . . . . . . . . . . . . . .161

SectIoN 13 – vic-easy® roll Grooving toolsVic-easy® roll grooving tools – field portable

Ve12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164Ve26 s/c/ss/p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164


taB

Le o

f co

NteN

tS

taBLe of coNteNtS

Ve26/Ve46 power drive kit . . . . . . . . . . . . . . . . . . . . . . . 164Ve46/p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Ve226 B/s/m/c/Bss/mss/p . . . . . . . . . . . . . . . . . . . . . . 165Ve226 power drive kit . . . . . . . . . . . . . . . . . . . . . . . . . . 166

Vic-easy roll grooving tools – field fabricationVe106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167Ve272sfs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168Ve270fsd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169Ve416fsd/417fsd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170Ve416fs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172Ve450fsd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

Vic-easy roll grooving tools – shop fabricationVe268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175Ve414mc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176Ve460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

Vic-easy tool accessoriesVpd752 power drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180Vaps 112 pipe stand . . . . . . . . . . . . . . . . . . . . . . . . . . . 180Vaps 224 pipe stand . . . . . . . . . . . . . . . . . . . . . . . . . . . 180Vaps 1672 pipe stand . . . . . . . . . . . . . . . . . . . . . . . . . . 181Ve436mc Quick change slide conversion kit . . . . . . . . . 181

cut grooving toolsVg28gd (gear drive) . . . . . . . . . . . . . . . . . . . . . . . . . . . 182Vg824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183Vg412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184Vg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

pipe preparation tool accessoriespower mule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187go/no-go pipe tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187tool carry Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Vic-adjustable cut groovers for pVc plastic pipeVpg26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188Vpg824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188

hole cutting toolsVhct 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189hct908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189Vic-tap® ii hot tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190

pressfit® toolspft505 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191pft505 Jaws only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191pft509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191pft509 Jaws only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191pressfit insertion gauges . . . . . . . . . . . . . . . . . . . . . . . . . 191

pipe cut off toolsVct1 – manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192Vct2 – automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

terms and conditions of tool rental . . . . . . . . . . . . . . . . . . 194terms and conditions of tool sale . . . . . . . . . . . . . . . . . . . . 195

GeNeraL INforMatIoN terms and conditions of sale . . . . . . . . . . . . .inside Back coverWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .inside Back coverVictaulic u.s. sales and service centers . . . . . . . . . .Back cover


taB

Le o

f c

oN

teN

tS

taBLe of coNteNtS

gasket selection guideRequest publication 05.01 for more information.

IMPortaNt PLeaSe read Before orderING. Gasket selection must always be specified on your order.

standard gaskets

IPS

GRADETEMP.

RANGE COMPOUNDCOLOR CODE GENERAL SERVICE RECOMMENDATIONS

E –30°F to +230°F EPDM GreenStripe

Recommended for hot water service within the specified tem-perature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C and hot +180°F/+82°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.

EHP –30°F to +250°F EPDM RedStripe

Recommended for hot water service within the specified tem-perature range. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C and hot +180°F/+82°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.

T –20°F to +180°F Nitrile OrangeStripe

Recommended for petroleum products, hydrocarbons, air with oil vapors, vegetable and mineral oils within the speci-fied temperature range; not recommended for hot dry air over +140°F/+60°C and water over +150°F/+66°C. NOT RECOMMENDED FOR HOT WATER SERVICES.

special gaskets

IPS

GRADETEMP.


M2 –40°F to +160°F Epichloro-hydrin

WhiteStripe

Specially compounded to provide superior service for common aro-matic fuels at low temperatures. Also suitable for certain ambient tem-perature water services.

V –30°F to +180°F Neoprene Yellow Stripe

Recommended for hot lubricating oils and certain chemicals. Good oxidation resistance. Will not support combustion.

O +20°F to +300°F Fluoro-elastomer

Blue Stripe

Recommended for many oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons to +300°F/+149°C. NOT RECOMMENDED FOR HOT WATER SERVICES.

L –30°F to +350°F Silicone Red Gasket

Recommended for dry heat, air without hydrocarbons to +350°F/+177°C and certain chemical services.

A +20°F to +180°F WhiteNitrile

White Gasket

No carbon black content. May be used for food. Meets FDA require-ments. Conforms to CFR Title 21 Part 177.2600. Not recommended for hot water services over +150°F/+66°C or for hot, dry air over +140°F/+60°C. NOT RECOMMENDED FOR HOT WATER SERVICES.

TEndSeal

–20°F to +150°F Nitrile

NoExternalIdentifi-cation

Specially compounded with excellent oil resistance and a high modulus for resistance to extrusion. Temperature Range –20°F/–29°C to +150°F/+66°C. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified tem-perature range. Not recommended for hot water services over +150°F/+66°C or for hot, dry air over +140°F/+60°C. For maximum gasket life under pressure extremes, temperature should be limited to +120°F/+49°C.

special gaskets

awwa aNd traNSItIoN coUPLING

GRADETEMP.


S –20°F to +180°F Nitrile OrangeStripe

Specially compounded to conform to ductile pipe surfaces. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; not recom-mended for hot dry air over +140°F and water over +150°F. NOT RECOMMENDED FOR HOT WATER SERVICES.

M –20°F to +200°FHaloge-

natedButyl

BrownStripe

Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Readily conforms to ductile pipe surfaces. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.

9

Gaskets


Ga

Ske

t SeLectIo

N G

UId

e


couplings and fittings


grooved ips pipe couplings

QuickVic® rigid coupling for steel

StyLe 107HRequest publication 06.21.

StyLe 107H – Grade “eHP” GaSket

PIPE Aprx. Wgt. Ea.COUPLING COMPLETE †

With Grade “EHP” or “T” Gasket SPARE PARTS

Inches

Lbs

Price Each

Grade “EHP” Gasket

Nom. Size

Outside Dia. Painted Galv.

2 2.375 2.1 $47.50 $60.50 $37.50

2Z\x 2.875 2.5 54.50 69.50 40.50

3 3.500 3.1 63.50 81.50 46.50

4 4.500 3.9 89.00 115.50 62.50

5 5.563 5.1 115.50 150.50 89.50

6 6.625 6.8 152.50 198.00 106.00

8 8.625 10.5 240.50 313.00 154.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

+ Quoted on application. Contact Victaulic for pricing and availability.

Zero-flex®

rigid coupling

StyLe 07

(with Style 77 gasket)Request publication 06.02.

StyLe 07 – Grade “e” or “t” GaSket or fLUSHSeaL® GaSket

PIPE

Apprx. Wgt. Ea.

COUPLING COMPLETE † With Grade “E” or

“T” Gasket

COUPLING COMPLETE † with FlushSeal®

“E” or “T” Gasket SPARE PARTS

Inches

Lbs.

Price Each Price Each Plated Bolt & Nut

Nom. Size

Outside Dia. Painted Galv. Painted Galv. No. *

Size § Inches

1 1.315 1.6 $43.00 $54.00 $61.00 $73.00 2 C\, x 2

1Z\v 1.660 1.7 43.00 54.00 61.00 73.00 2 C\, x 2

1Z\x 1.900 1.9 43.00 54.00 61.00 73.00 2 C\, x 2

2 2.375 2.2 47.50 60.50 63.00 76.00 2 Z\x x 2Z\x

2Z\x 2.875 2.6 54.50 69.50 76.50 89.50 2 Z\x x 2C\v

3 3.500 3.0 63.50 81.50 80.50 99.50 2 Z\x x 2Z\x

4 4.500 4.8 89.00 115.50 113.50 140.00 2 Z\x x 2C\v

5 5.563 6.7 115.50 150.50 180.00 317.50 2 B\, x 3Z\v

6 6.625 8.3 152.50 198.00 212.50 260.00 2 B\, x 3Z\v

8 8.625 15.1 240.50 313.00 280.50 351.50 2 C\v x 4Z\v

10 10.750 23.5 396.50 530.00 477.00 607.00 2 M\, x 6Z\x

12 12.750 28.2 443.50 594.00 543.00 698.50 2 M\, x 6Z\x

§ Metric thread size bolts available. Contact Victaulic.


† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.


NOTE: See Spare Parts Section for spare part prices.

* Number of bolts equals number of segments supplied.


Grooved IPS Pipe couplingsSe

ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

Zero-flex rigid coupling

StyLe 07


StyLe 07 – SILIcoNe Grade “L” GaSket or fLUoroeLaStoMer Grade “o” GaSket

PIPEAprx.

Wgt. Ea.

COUPLING COMPLETE † With Silicone

Grade “L” Gasket

COUPLING COMPLETE † With Fluoroelastomer

Grade “O” Gasket SPARE PARTS

Inches

Lbs.


Nom. Size

Outside Dia. Painted Galv. Painted Galv. No. *

Size § Inches

1 1.315 1.6 $100.00 $110.50 $286.00 $297.50 2 C\, x 2

1Z\v 1.660 1.7 100.00 110.50 273.50 285.00 2 C\, x 2

1Z\x 1.900 1.9 134.00 145.00 286.50 298.00 2 C\, x 2

2 2.375 2.2 92.50 104.50 239.00 251.00 2 Z\x x 2Z\x

2Z\x 2.875 2.6 106.00 120.00 269.00 283.00 2 Z\x x 2C\v

3 3.500 3.0 118.50 136.00 301.00 318.50 2 Z\x x 2Z\x

4 4.500 5.3 177.00 201.50 493.00 517.50 2 Z\x x 2C\v

5 5.563 6.7 318.50 351.00 537.50 570.00 2 B\, x 3Z\v

6 6.625 8.3 374.50 416.00 676.00 718.00 2 B\, x 3Z\v

8 8.625 15.1 468.50 535.50 821.00 888.00 2 C\v x 4Z\v

10 10.750 23.5 719.50 853.00 1181.50 1314.50 2 M\, x 6Z\x

12 12.750 28.2 826.00 977.00 1636.00 1787.00 2 M\, x 6Z\x







NOTE: For 14 - 24” Style 07 couplings contact your local Victaulic sales representative.

13

Grooved IPS Pipe couplings


SectIo

N 1

G

ro

oved

IPS

PIPe

co

UPLIN

GS

rigid coupling

aGS StyLe w07Request publication 20.02.

14 – 24”

26 – 60”

aGS StyLe w07 – Grade “e” or “t” fLUSHSeaL GaSket

PIPEAprx.

Wgt. EaCOUPLING COMPLETE †

With FlushSeal® “E” or “T” Gasket SPARE PARTS

Inches

Lbs.

Price Each Plated Bolt & Nut

Nom. Size

Outside Dia. Painted Galv. No. *

Size § Inches

14 14.000 48.9 $511.00 $655.50 2 1 x 5Z\x

16 16.000 60.8 665.50 849.50 2 1 x 5Z\x

18 18.000 71.2 769.00 996.50 2 1 x 5Z\x

20 20.000 81.7 1051.00 1317.00 2 1Z\, x 5Z\x

24 24.000 116.2 1347.50 1707.00 2 1Z\, x 5Z\x

26 26.000 205.0 2436.00 * + 4 1C\, x 6

28 28.000 220.0 2903.00 * + 4 1C\, x 6

30 30.000 227.0 4069.50 * + 4 1Z\v x 7

32 32.000 242.0 4446.00 * + 4 1Z\v x 7

36 36.000 268.0 4796.00 * + 4 1Z\v x 7

40 40.000 340.0 5741.50 * + 4 1Z\x x 7

42 42.000 360.0 6397.00 * + 4 1Z\x x 7

46 46.000 415.0 6794.50 * + 4 1Z\x x 7

48 48.000 425.0 7071.50 * + 4 1Z\x x 7

54 54.000 648.0 + + 4 1Z\x x 7

56 56.000 676.0 + + 4 1Z\x x 7

60 60.000 720.0 + + 4 1Z\x x 7






* Prices shown are for the Grade "E" EPDM gasket only. For pricing on Grade "T" Nitrile gaskets, contact Victaulic.

rigid coupling


14 – 24”

26 – 60”

aGS StyLe w07 – SILIcoNe Grade “L” fLUSHSeaL GaSket

PIPEAprx.

Wgt. Ea.

COUPLING COMPLETE † With FlushSeal Silicone Grade “L”

Gasket SPARE PARTS

Inches

Lbs


Nom. Size

Outside Dia. Painted Galv. No.

Size § Inches

14 14.000 48.9 $1282.50 $1427.00 2 1 x 5Z\x

16 16.000 60.8 1411.00 1594.50 2 1 x 5Z\x

18 18.000 71.2 1551.50 1779.00 2 1 x 5Z\x

20 20.000 81.7 1798.50 2064.50 2 1Z\, x 5Z\x

24 24.000 116.2 1959.50 2318.50 2 1Z\, x 5Z\x

26 26.000 205.0 + + 4 1C\, x 6

28 28.000 220.0 + + 4 1C\, x 6

30 30.000 227.0 + + 4 1Z\v x 7

32 32.000 242.0 + + 4 1Z\v x 7

36 36.000 268.0 + + 4 1Z\v x 7

40 40.000 340.0 + + 4 1Z\x x 7

42 42.000 360.0 + + 4 1Z\x x 7

46 46.000 415.0 + + 4 1Z\x x 7

48 48.000 425.0 + + 4 1Z\x x 7

54 54.000 648.0 + + 4 1Z\x x 7

56 56.000 676.0 + + 4 1Z\x x 7

60 60.000 720.0 + + 4 1Z\x x 7








ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

QuickVic® flexible coupling for steel

StyLe 177Request publication 06.20.

StyLe 177 – Grade “eHP” or “t” GaSket

PIPEAprx.

Wgt. Ea.COUPLING COMPLETE †

With Grade “EHP” or “T” Gasket SPARE PARTS

Inches

Lbs

Price Each

Grade “EHP” or “T” Gasket

Nom. Size


2 2.375 2.0 $51.50 $68.50 $37.50

2Z\x 2.875 2.4 60.00 84.50 40.50

3 3.500 3.1 67.00 93.00 46.50

4 4.500 3.7 96.50 136.50 62.50

5 5.563 4.8 146.50 211.00 89.50

6 6.625 6.3 173.50 249.50 106.00

8 8.625 10.5 282.50 420.50 154.00


standard coupling


StyLe 77 – Grade “e” or “t” GaSket or fLUSHSeaL GaSket

PIPEAprx.

Wgt. Ea.

COUPLING COMPLETE † With Grade “E” or “T”

Gasket

COUPLING COMPLETE † With FlushSeal®


Inches

Lbs


Nom. Size

Outside Dia. Painted Galv. Painted Galv. No.*

Size § Inches

C\v 1.050 1.1 $31.00 $42.00 $49.00 $60.50 2 C\, x 2

1 1.315 1.2 31.00 42.00 49.00 60.50 2 C\, x 2

1Z\v 1.660 2.0 41.00 55.00 60.50 75.50 2 Z\x x 2Z\x

1Z\x 1.900 2.1 45.00 59.00 63.50 79.00 2 Z\x x 2Z\x

2 2.375 2.6 47.50 63.50 66.50 83.50 2 Z\x x 2Z\x

2Z\x 2.875 3.1 55.50 78.00 81.00 103.50 2 Z\x x 2C\v

3 3.500 3.7 62.00 86.00 84.00 109.00 2 Z\x x 2C\v

3Z\x 4.000 5.6 89.50 126.50 121.00 159.50 2 B\, x 3Z\v

4 4.500 6.7 89.50 126.50 121.50 159.50 2 B\, x 3Z\v

5 5.563 10.5 136.00 195.50 213.50 277.00 2 C\v x 4Z\v

6 6.625 12.0 160.50 231.00 236.00 310.00 2 C\v x 4Z\v

8 8.625 20.8 261.00 389.00 319.00 438.00 2 M\, x 5

10 10.750 31.1 432.00 619.50 513.00 690.00 2 1 x 6

12 12.750 27.8 491.50 704.00 602.50 793.00 2 1 x 6Z\x

28 I.D.** 35.500 95.0 + + + + 4 1 x 5Z\x

30 I.D.** 37.880 127.2 + + + + 4 1 x 5Z\x





** Requires Vic-Ring for assembly.


NOTE: 14 - 60” standard for this size range is the W77 AGS flexible coupling. For cut groove systems requiring the original groove coupling contact Victaulic for details.


15



SectIo

N 1

G

ro

oved

IPS

PIPe

co

UPLIN

GS

standard coupling


StyLe 77 – SILIcoNe Grade “L” GaSket or fLUoroeLaStoMer Grade “o” GaSket

PIPEAprx.

Wgt. Ea.

COUPLING COMPLETE † With Silicone

Grade “L” Gasket

COUPLING COMPLETE † With Fluoroelastomer

Grade “O” Gasket SPARE PARTS

Inches

Lbs


Nom. Size

Outside Dia. Painted Galv. Painted Galv. No.*

Size § Inches

C\v 1.050 1.1 $88.00 $99.00 $274.00 $285.50 2 C\, x 2

1 1.315 1.2 88.00 99.00 274.00 285.50 2 C\, x 2

1Z\v 1.660 2.0 132.00 146.00 271.50 286.00 2 C\, x 2

1Z\x 1.900 2.1 139.50 153.50 289.00 303.00 2 Z\x x 2Z\x

2 2.375 2.6 96.00 112.00 242.50 258.00 2 Z\x x 2Z\x

2Z\x 2.875 3.1 112.00 133.50 274.00 296.50 2 Z\x x 2C\v

3 3.500 3.7 122.00 146.50 304.50 329.00 2 Z\x x 2C\v

3Z\x 4.000 5.6 + + 314.00 + 2 B\, x 3Z\v

4 4.500 6.7 183.50 220.50 499.50 536.50 2 B\, x 3Z\v

5 5.563 10.5 347.50 407.00 566.50 627.50 2 C\v x 4Z\v

6 6.625 12.0 393.00 463.50 695.00 765.50 2 C\v x 4Z\v

8 8.625 20.8 507.00 634.50 859.00 987.00 2 M\, x 5

10 10.750 31.1 754.50 942.00 1216.50 1404.00 2 1 x 6

12 12.750 27.8 874.50 1086.50 1684.50 1896.50 2 1 x 6Z\x










ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

flexible coupling


14 – 24”

26 – 60”


PIPEAprx.

Wgt. Ea.



Inches

Lbs


Nom. Size


Size § Inches

14 14.000 47.5 $526.50 $727.50 2 1 x 5Z\x

16 16.000 57.8 690.50 937.00 2 1 x 5Z\x

18 18.000 65.0 808.50 1121.00 2 1 x 5Z\x

20 20.000 82.3 1079.50 1448.50 2 1Z\, x 5Z\x

24 24.000 106.8 1393.50 1871.00 2 1Z\, x 5Z\x

26 26.000 205.0 2457.50 * + 4 1Z\, x 6

28 28.000 220.0 2972.00 * + 4 1Z\, x 6

30 30.000 227.0 4122.50 * + 4 1Z\v x 7

32 32.000 242.0 4522.00 * + 4 1Z\v x 7

36 36.000 268.0 4849.50 * + 4 1Z\v x 7

40 40.000 340.0 5800.00 * + 4 1Z\x x 7

42 42.000 360.0 6429.00 * + 4 1Z\x x 7

46 46.000 415.0 6846.00 * + 4 1Z\x x 7

48 48.000 425.0 7135.00 * + 4 1Z\x x 7

54 54.000 648.0 + + 4 1Z\x x 7

56 56.000 676.0 + + 4 1Z\x x 7

60 60.000 720.0 + + 4 1Z\x x 7








17



SectIo

N 1

G

ro

oved

IPS

PIPe

co

UPLIN

GS

flexible coupling


14 – 24”

26 – 60”

aGS StyLe w77 – SILIcoNe Grade “L” fLUSHSeaL GaSket

PIPEAprx.

Wgt. Ea.

COUPLING COMPLETE † With FlushSeal Silicone Grade “L”

Gasket SPARE PARTS

Inches

Lbs


Nom. Size

Outside Dia. Painted Galv. No.

Size § Inches

14 14.000 47.5 $1298.00 $1498.50 2 1 x 5Z\x

16 16.000 57.8 1435.50 1682.00 2 1 x 5Z\x

18 18.000 65.0 1590.50 1849.00 2 1 x 5Z\x

20 20.000 82.3 1827.00 2196.50 2 1Z\, x 5Z\x

24 24.000 106.8 2042.50 2483.00 2 1Z\, x 5Z\x

26 26.000 205.0 + + 4 1Z\, x 6

28 28.000 220.0 + + 4 1Z\, x 6

30 30.000 227.0 + + 4 1Z\v x 7

32 32.000 242.0 + + 4 1Z\v x 7

36 36.000 268.0 + + 4 1Z\v x 7

40 40.000 340.0 + + 4 1Z\x x 7

42 42.000 360.0 + + 4 1Z\x x 7

46 46.000 415.0 + + 4 1Z\x x 7

48 48.000 425.0 + + 4 1Z\x x 7

54 54.000 648.0 + + 4 1Z\x x 7

56 56.000 676.0 + + 4 1Z\x x 7

60 60.000 720.0 + + 4 1Z\x x 7






large diameter coupling

StyLe 770Request publication 06.03

StyLe 770 – Grade “e” GaSket

PIPEAprx.

Wgt. Ea.COUPLING COMPLETE † With Grade “E” Gasket § SPARE PARTS

Inches

Lbs


Nom. Size


Size § Inches

26 26.00 150.0 $1789.00 $2337.00 6 1Z\v x 3Z\x

28 28.00 175.0 1833.00 + 6 1Z\v x 3Z\x

30 30.00 200.0 2109.50 2737.00 6 1Z\v x 3Z\x

32 32.00 225.0 2848.00 3794.00 6 1Z\v x 4Z\x

36 36.00 250.0 4207.00 5028.50 6 1Z\v x 3Z\x

42 42.00 400.0 8506.50 11995.00 8 1Z\x x 4Z\x





§ Grade “T” gaskets available. Contact Victaulic for details.




ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

flexible coupling



PIPEAprx.


With Grade “E” or “T” Gasket



Inches

Lbs


Nom. Size

Outside Dia. Painted Galv. Painted Galv.

Size § Inches

1 1.315 1.3 $31.50 $39.50 $51.00 $60.00 C\, x 2

1Z\v 1.660 1.4 32.50 42.00 53.50 63.50 C\, x 2

1Z\x 1.900 1.5 39.50 49.00 58.50 69.50 C\, x 2

2 2.375 1.8 40.00 51.00 60.00 71.50 C\, x 2

2Z\x 2.875 1.9 46.50 58.50 71.50 84.50 C\, x 2

3 3.500 2.9 54.00 68.00 76.00 91.50 Z\x x 2C\v

4 4.500 4.1 75.50 98.00 108.00 132.50 Z\x x 2C\v

5 5.563 5.8 108.00 140.00 185.00 221.00 B\, x 3Z\v

6 6.625 7.0 129.00 168.00 204.50 248.00 B\, x 3Z\v

8 8.625 12.9 202.00 269.50 263.50 335.00 C\v x 4Z\v






flexible coupling


StyLe 75 – SILIcoNe Grade “L” GaSket

PIPEAprx.


With Silicone Grade “L” Gasket SPARE PARTS

Inches

Lbs


Nom. Size


Size § Inches

1 1.315 1.3 $84.50 $95.50 C\, x 2

1Z\v 1.660 1.4 123.50 133.00 C\, x 2

1Z\x 1.900 1.5 134.00 144.00 C\, x 2

2 2.375 1.7 89.00 99.50 C\, x 2

2Z\x 2.875 1.9 102.00 114.00 C\, x 2

3 3.500 2.9 113.50 128.00 Z\x x 2C\v

3Z\x 4.000 2.9 + + Z\x x 2C\v

4 4.500 4.1 169.50 192.00 Z\x x 2C\v

4Z\x 5.000 5.5 – – B\, x 3Z\v

5 5.563 5.8 320.00 351.50 B\, x 3Z\v

6 6.625 7.0 362.00 401.00 B\, x 3Z\v

8 8.625 12.9 448.00 515.50 C\v x 4Z\v






19



SectIo

N 1

G

ro

oved

IPS

PIPe

co

UPLIN

GS

reducing coupling


StyLe 750 – Grade “e” or “t” GaSket

PIPEAprx


With Grade “E” or “T” Gasket SPARE PARTS

Nominal Size

Lbs


Inches Painted Galv.Size § Inches

2 x 1 2.0 $83.50 $100.00 C\, x 2

1Z\x 2.0 67.00 81.00 C\, x 2

2Z\x x 2 2.9 87.00 109.00 C\, x 2

3 x 2 4.6 99.50 125.50 Z\x x 2C\v

2Z\x 4.1 85.50 109.00 Z\x x 2C\v

4 x 2 8.8 157.00 198.50 B\, x 3Z\v

2Z\x 8.3 141.00 185.50 B\, x 3Z\v

3 6.4 132.00 170.50 B\, x 3Z\v

5 x 4 10.8 177.50 233.50 C\v x 4Z\v

6 x 4 16.1 267.50 337.50 C\v x 4Z\v

5 12.6 234.00 304.00 C\v x 4Z\v

8 x 6 22.3 400.50 507.50 M\, x 5

10 x 8 58.0 514.00 651.50 1 x 6






Support rings required on vertical installations. Please specify on order.



ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

Vic-flange® adapters

StyLe 741

Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges.Request publication 06.06.


PIPEAprx.



Inches

Lbs

Price Each

Nom. Size Outside Dia. Painted Galv.

STYLE 741 – Hinged

2 2.375 3.1 $191.00 $230.50

2Z\x 2.875 4.8 236.50 291.50

3 3.500 5.3 255.50 316.50

4 4.500 7.4 341.50 423.00

5 5.563 8.6 396.50 491.00

6 6.625 9.9 432.50 538.50

8 8.625 16.2 488.50 626.50

10 10.750 24.2 772.50 982.00

12 12.750 46.8 1011.00 1299.50





The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL. flanges. Flanged Adapter Nipples are also available in C\v” and larger sizes in ANSI CL. 125, CL. 150, CL 300 and other ANSI ratings - quoted on application.

Vic-flange adapters

StyLe w741

Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges.Request publication 20.04.

StyLe w741 – Grade “e”, “t” or “L” GaSket

PIPEAprx.



COUPLING COMPLETE †

With Grade “L” Gasket

Inches

Lbs

Price Each

Price EachNom. Size Outside Dia. Painted Galv.

14 14.000 70.0 $2045.00 $2516.00 +

16 16.000 88.0 2373.00 2941.00 +

18 18.000 101.0 2920.50 3722.50 +

20 20.000 115.0 3514.50 4497.00 +

24 24.000 160.0 4497.00 5801.50 +





The AGS Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL. flanges.

21



SectIo

N 1

G

ro

oved

IPS

PIPe

co

UPLIN

GS

Vic-flange grooved flange adapters §

StyLe 743

Grooved Pipe Adapters to ANSI Class 300 Flanges (with Style 741 gasket)Request publication 06.06.


PIPEAprx.



Inches

Lbs

Price Each

Nominal Size Outside Diameter Painted Galv.

2 2.375 4.8 $238.50 $280.00

2Z\x 2.875 7.4 276.00 330.00

3 3.500 9.1 377.50 448.00

4 4.500 15.3 502.50 609.00

5 5.563 17.7 571.50 691.00

6 6.625 23.4 664.50 815.00

8 8.625 34.3 762.50 961.50

10 10.750 48.3 1214.50 1509.50

12 12.750 70.5 1296.50 1673.00




§ Utilizes standard ANSI 300 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI class 300 flanges.

Vic-flange adapter notes

Vic-flange adapters require a smooth, hard surface at the mating flange face for effective sealing. some applications, for which the Vic-flange adapter is otherwise well suited, do not provide an adequate mating surface. in such cases, it is recom-mended that a metal flange Washer be inserted between the Vic-flange adapter and the mating flange to provide the necessary sealing surface. see spare parts section for flange Washer prices.

typical applications where a Vic-flange Washer should be used are:

1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. the flange washer is then inserted between the Vic-flange adapter and the flange gasket.

2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Vic-flange adapter.

3. When mating to a rubber faced flange: the flange washer is placed between the Vic-flange adapters and the rubber faced flange.

4. When mating c.i. flanges to ips flanges: the flange washer is placed between two Vic-flange adapters. if one flange is not a Vic-flange adapter (e.g., flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Vic-flange adapter.

5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.



ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

outlet coupling


StyLe 72 – Grade “e” or “t” GaSket - for StyLe 72 GaSketS See BeLow.

Nominal Size OUTLET COUPLING COMPLETE † with Grade “E” or “T” Gasket SPARE PARTS

Inches Run x Branch

Aprx Wgt. Ea.

Lbs

Female Thd. Branch

Plated Bolt & NutPrice Each

Painted Galv.Size § Inches

1Z\x x Z\x 1.4 $85.00 $100.50 C\, x 2

C\v 2.8 85.00 100.50 C\, x 2

1 2.8 85.00 100.50 C\, x 2

2 x Z\x 3.5 87.00 107.50 C\, x 2

C\v 2.5 87.00 107.50 C\, x 2

1 3.2 87.00 107.50 C\, x 2

2Z\x x Z\x 4.5 134.00 165.50 Z\x x 2C\v

C\v 4.6 134.00 165.50 Z\x x 2C\v

1 6.0 134.00 165.50 Z\x x 2C\v

1Z\v 5.0 151.50 192.00 B\, x 3Z\v

1Z\x 5.0 171.00 214.50 B\, x 3Z\v

3 x C\v 4.5 129.50 157.50 Z\x x 2C\v

1 8.9 171.00 214.50 B\, x 3Z\v

1Z\v 8.5 196.50 270.50 B\, x 3Z\v

1Z\x 8.5 196.50 270.50 B\, x 3Z\v

4 x C\v 6.3 190.00 236.00 Z\x x 2C\v

1 6.5 190.00 236.00 Z\x x 2C\v

1Z\x 11.6 269.50 344.00 B\, x 3Z\v

2 14.6 269.50 344.00 B\, x 3Z\v

6 x 1 19.3 381.50 495.50 C\v x 4Z\v

1Z\x 19.3 381.50 495.50 C\v x 4Z\v

2 19.5 381.50 495.50 C\v x 4Z\v





23



SectIo

N 1

G

ro

oved

IPS

PIPe

co

UPLIN

GS

Vic-Boltless®

coupling *

StyLeS 791 coUPLING aNd 792 aSSeMBLy tooLRequest publication 06.11.


PIPEAprx.



Inches

Lbs

Price Each

Nom. Size Outside Dia. Painted Galv.

2 2.375 1.8 $79.50 +

2Z\x 2.875 2.7 99.50 +

3 3.500 2.6 99.50 +

4 4.500 4.8 109.00 +

6 6.625 6.3 152.00 +

8 8.625 12.0 237.50 +


* Coupling complete includes one-piece hinged housing, gasket (specify choice on order) and locking pin only. Assembly Tool required for assembly (purchased separately).




StyLe 792 reMovaBLe aSSeMBLy tooL

Size Price Each

One size fits all sizes Style 791 Couplings $107.00


locking pins^

StyLe 791

^ Victaulic locking pins must be used to assemble Style 791 couplings. Use of other objects are strictly prohibited.

StyLe 791

Nom. Pipe SizeSPARE PARTS Locking Pin

InchesSize

Inches Price Per Piece

2 B\zn x 2 $3.50

2Z\x C\, x 2 3.50

3 C\, x 2 3.50

4 M\zn x 2Z\, 4.00

6 Z\x x 2C\zn 4.50

8 Z\x x 2M\zn 5.00


snap-Joint® coupling

StyLe 78



PIPEAprx.



COUPLING COMPLETE With FlushSeal®

Gasket †

Inches

Lbs

Price Each Price Each

Nom. Size Outside Dia. Painted Galv. Painted Galv.

1 (a) 1.315 0.8 $75.50 $87.50 $80.00 $94.00

1Z\v (a) 1.660 1.1 88.50 107.00 97.00 116.00

1Z\x (a) 1.900 1.7 85.00 101.50 89.00 106.00

2 (b) 2.375 1.7 81.50 89.00 85.50 101.50

2Z\x (b) 2.875 2.5 89.50 107.50 110.50 132.50

3 (b) 3.500 2.8 104.50 129.00 125.50 153.00

4 (b) 4.500 5.5 134.00 173.00 165.50 206.50

5 (c) 5.563 9.8 274.00 335.50 338.00 413.00

6 (c) 6.625 10.7 287.50 362.50 359.50 438.00

8 (c) 8.625 15.3 440.50 552.00 499.00 615.50




(a) Available with steel toggle locking assembly only.(b) Extended length cast handle standard; steel toggle is an additional cost option. Specify choice on order.(c) Available with cast handle only.



ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

rigid coupling

StyLe HP-70

(with Style 77 Gasket)Request publication 06.12.

StyLe HP-70 – Grade “e” or “t” GaSket

PIPEAprx.

Wgt. Ea.COUPLING COMPLETE † with “E” or “T” Gasket SPARE PARTS

Inches

Lbs

Price EachPlated

Bolt & Nut

Nom. SizeOutside

Dia. Painted Galv.Size § Inches

2 2.375 3.2 $58.50 $79.00 B\, x 2C\v

2Z\x 2.875 4.0 66.50 89.50 B\, x 3Z\x

3 3.500 4.4 74.00 100.50 B\, x 3Z\x

4 4.500 7.5 108.00 154.00 C\v x 4Z\v

6 6.625 16.0 195.00 281.50 M\, x 5Z\x

8 8.625 26.3 313.00 449.50 1 x 5Z\x

10 10.750 32.8 578.50 792.00 1 x 6Z\x

12 12.750 42.1 843.00 1128.50 1 x 6Z\x

14 14.000 64.0 1040.00 1463.00 1Z\v x 4Z\x

16 16.000 72.0 1267.00 1748.00 1Z\v x 4Z\x





endseal® coupling

StyLe HP-70eS

With “ES” GasketRequest publication 06.13.

StyLe HP-70eS – “eS” GaSket

PIPEAprx.


With “ES” Gasket“ES”

Gasket OnlyPlated

Bolt & Nut

Inches

Lbs

Price Each

Price EachSize § InchesNom. Size Outside Dia. Painted Galv.

2 2.375 3.2 $78.50 $100.00 $44.50 B\, x 2C\v

2Z\x 2.875 4.0 91.50 118.50 55.50 B\, x 3Z\x

3 3.500 4.6 102.00 134.00 60.50 B\, x 3Z\x

4 4.500 8.2 144.00 194.50 78.00 C\v x 4Z\v

6 6.625 16.4 249.00 334.00 111.50 M\, x 5Z\x

8 8.625 26.0 384.50 520.00 150.50 1 x 5Z\x

10 10.750 37.2 721.00 954.50 245.00 1 x 6Z\x

12 12.750 42.0 910.50 1288.00 279.50 1 x 6Z\x






For use with cement-lined and plastic-coated pipe where protection at pipe ends is desired.

When EndSeal Couplings (Style HP-70ES) are used, special pipe grooving dimensions are required. See publica-tion 25.02 for details.Fittings for use with EndSeal Couplings are of special dimensions and should be specified as “EndSeal Fittings” when ordering.

25



SectIo

N 1

G

ro

oved

IPS

PIPe

co

UPLIN

GS

transition coupling (aWWa to ips)


StyLe 307 – Grade “M” or “S” fLUSHSeaL GaSket

PIPE Inches

Aprx. Wgt. Ea.

COUPLING COMPLETE † With Grade “M” or “S”

FlushSeal Gasket SPARE PARTS

Nom. Size

Mating Pipe O.D.

Lbs

Price Each Grade “M” or “S” FlushSeal

Gasket Only Price Ea. Bolt & Nut IPS Steel

AWWA Ductile Painted Galv.

3 3.500 3.960 6.0 $174.00 $233.00 $73.50 Z\x x 2C\v

4 4.500 4.800 8.0 199.00 274.00 76.50 Z\x x 3Z\v

6 6.625 6.900 9.0 242.00 329.50 82.00 B\, x 3Z\v

8 8.625 9.050 18.0 301.50 449.00 91.50 C\v x 5

10 10.750 11.100 22.0 387.50 570.00 160.50 M\, x 6Z\x

12 12.750 13.200 31.1 515.50 768.50 166.00 M\, x 6Z\x






ctI

oN

1

Gr

oo

ved

IP

S P

IPe

co

UPLI

NG

S

lubricant LUBRICANT 4Z\x oz. Tube or 1 Quart Containers Price Each

PACKWith 12 Tubes – 4Z\x oz. Each $240.50

CONTAINEROne Quart – Container 104.00


To ensure easy assembly and service of all your Victaulic installations, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.

NOTE: Victaulic lubricant is not recommended for use with HDPE pipe.

LUBRICANT USAGE GUIDE

Size of Gasket Inches

Number of Gaskets Size of Gasket Inches

Number of Gaskets Size of Gasket Inches

Number of Gaskets

Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart

2 55 400 8 13 100 16 6 45

3 36 270 10 11 80 18 5 35

4 26 200 12 8 60 20 4 30

6 17 125 14 7 50 24 3 20

NOTE: Victaulic lubricant is not recommended for use with HDPE pipe.

gaskets

for GaSket SeLectIoN GUIde, See PaGe 9

GaSketS for StyLeS 07, HP-70, 75, 77, 78, 791, 997, 775, 475, 489 aNd 89 coUPLINGS

Nom. Size Standard Gaskets Special Gaskets

Inches

Grade “E” EPDM or

Grade “T” Nitrile

FlushSeal Grade “E” or “T”

Grade “O” Fluoroelastomer

Grade “V” Black Neoprene

FlushSeal Grade “A”

White Nitrile

FlushSeal Grade “O”

Fluoroelastomer

C\v $22.50 $43.50 $274.00 + $71.50 +

1 22.50 43.50 274.00 + 71.50 +

1Z\v 23.50 46.00 262.00 + 116.50 +

1Z\x 25.50 46.50 277.00 + 95.00 +

2 25.50 47.00 226.50 + 118.00 +

2Z\x 30.00 58.50 256.00 + 121.00 +

3 32.50 58.50 283.00 + 184.00 +

3Z\x 40.50 75.50 + – – –

4 40.50 78.00 464.00 + 187.50 +

4Z\x 53.00 – – – – –

5 53.00 138.50 497.50 + 189.00 +

6 57.00 141.50 609.50 + 191.00 +

8 78.00 147.00 698.00 + 229.00 +

10 98.50 189.00 909.00 + 316.00 +

12 114.50 225.00 1346.50 + 450.00 +

13Z\x + – – – – –

14 158.00 235.50 + + + +

16 218.00 326.00 + + + +

18 262.50 392.50 + + + +

20 403.50 603.50 + + + +

24 559.00 832.50 + + + +



27

Spare Parts


SectIo

N 1

SPa

re

Par

tS

for StyLe w07/w77 aGS GaSketS

Nom. Size Inches

FlushSeal Grade “E” or “T” Gasket

Grade “L” Silicone Gasket

14 $173.00 $1019.50

16 238.00 1096.00

18 287.50 1145.50

20 441.50 1262.00

24 612.00 1283.50

26 769.50 * +

28 823.00 * +

30 876.50 * +

32 929.50 * +

36 1032.50 * +

40 1140.00 * +

42 1193.00 * +

46 1279.00 * +

48 1334.50 * +

54 1580.00 * +

56 1631.50 * +

60 1739.00 * +



SILIcoNe GaSketS for StyLeS 07, HP-70, 75, 77, 78, 791, 997, 77S, 475, 489 aNd 89 coUPLINGS

Nom. Size Inches

Grade “L” Silicone

FlushSeal Grade “L” Silicone

C\v $81.50 +

1 81.50 +

1Z\v 117.50 $306.50

1Z\x 123.00 183.00

2 75.50 113.00

2Z\x 87.50 131.00

3 94.50 141.50

3Z\x + –

4 138.00 205.00

4Z\x + +

5 271.50 406.00

6 297.50 445.00

8 332.00 496.50

10 432.00 648.00

12 510.00 764.00

13Z\x + –

14 706.00 1058.00

16 + +

18 + +

20 + +

24 + +




Spare PartsSe

ctI

oN

1

SPa

re

Pa

rtS

style 750 gaskets

NOTE:For pricing couplings complete with any special gaskets, contact Victaulic . Gasket recommendations can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for recommendations when a question arises.

StaNdard “e” or “t” GaSketS for StyLe 750

Nom. Size Inches Price Each

Run x Brch. “E” or “T”

2 x 1 $23.50

1Z\x 23.50

2Z\x x 2 31.00

3 x 2 35.50

2Z\x 35.50

4 x 2 41.00

2Z\x 41.50

3 43.50

5 x 4 50.50

6 x 4 57.50

5 62.50

8 x 6 69.50

10 x 8 84.00


flange parts

for StyLeS 741, w741, 743 & 441 vIc-fLaNGe adaPterS

for StyLeS 741, w741, 743 & 441 vIc-fLaNGe adaPterS

Flange Size Style 741 Bolt and Nut FLANGE WASHERS

InchesQty.

Per SetSize

Inches

Price Per Set Plated

Style 741 ANSI Plated Style 743

2 4 B\, x 3 + $67.00 +

2Z\x 4 B\, x 3 + 70.50 +

3 4 B\, x 3 + 82.50 +

4 8 B\, x 3 + 95.50 +

5 8 C\v x 3Z\x + 116.50 +

6 8 C\v x 3Z\x + 133.00 +

8 8 C\v x 3Z\x + 168.50 +

10 12 M\, x 4 + 233.50 +

12 12 M\, x 4 + 341.50 +

14 * 12 1 x 4Z\x + 372.50 –

16 * 16 1 x 4Z\x + 662.00 –

18 * 16 1Z\, x 4C\v + 705.50 –

20 * 20 1Z\, x 5Z\v + + –

24 * 20 1Z\v x 5C\v + + –



* Flange parts supplied for Style W741 AGS Flange

29

Spare Parts


SectIo

N 1

SPa

re

Par

tS

flange gaskets

for StyLe 741, w741, 743 & 441 vIc-fLaNGe adaPterS

for StyLe 741, w741, 743 & 441 vIc-fLaNGe adaPterS

Flange SizeStandard Gaskets

Price EachSpecial Gaskets

Price Each

Inches

Style 741/743 Grade “E” or “T”

Gasket OnlyStyle 741/743

Grade “L” Silicone

Style 741 Grade “O”

Fluoroelastomer

2 $20.50 + +

2Z\x 24.00 + +

3 26.50 + +

4 34.00 + +

5 41.00 + +

6 46.50 + +

8 62.50 + +

10 80.00 + +

12 93.00 + +

14 * 118.50 + –

16 * 132.00 + –

18 * 193.00 + –

20 * 208.50 + –

24 * 232.00 + –



* Flange gaskets supplied for Style W741 AGS Flange


Spare PartsSe

ctI

oN

1

SPa

re

Pa

rtS

style 72 gaskets

NOTE:For pricing couplings complete with any special gaskets, contact Victaulic . Gasket recommendations can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for recommendations when a question arises.

StaNdard “e” or “t” GaSket for StyLe 72


Run x Brch. Style 72

1Z\x x Z\x $40.00

C\v 40.00

1 40.00

2 x Z\x 40.50

C\v 40.50

1 40.50

2Z\x x Z\x 84.50

C\v 84.50

1 84.50

1Z\v 94.50

1Z\x 94.50


Run x Brch. Style 72

3 x C\v $68.50

1 97.50

1Z\v 97.50

1Z\x 97.50

4 x C\v 97.50

1 97.50

1Z\v +

1Z\x 152.50

2 152.50

6 x 1 199.00

1Z\x 199.00

2 199.00



M-2 GaSketS

Nominal Size Inches

Grade “M-2” Gaskets

1Z\x +

2 +

2Z\x +

3 +

4 +

6 +

8 +

StyLe 770 GaSketS

Nominal Size Inches Grade “E” EPDM

26 $540.00

28 587.50

30 626.00

32 679.50

36 785.00

42 1000.50



metal liners

StyLeS 77, 75 aNd 78 coUPLINGS

(Type 304 Stainless Steel)

StyLeS 77, 75 aNd 78 coUPLINGS


2 +

2Z\x +

3 +

4 +

5 +

6 +

8 +

10 +


12 +

14 +

16 +

18 +

20 +

24 +

28 +

30 +



31

Spare Parts


SectIo

N 1

SPa

re

Par

tS

plated trackhead Bolts and nuts

PLated trackHead BoLtS aNd NUtS

Bolt and Nut Size Inches Price Each

C\, x 2 $11.00

Z\x x 2Z\x 11.50

2C\v 11.50

3 11.50

3Z\v 11.50

B\, x 2C\v 14.00

3Z\v 14.00

3Z\x 15.00

4 19.00

5 23.50

C\v x 4Z\v 16.00

5 22.00

M\, x 5 29.50

5Z\x 34.00

6Z\x 37.50


1 x 3Z\x $32.50

5 30.00

5Z\x 37.50

6 37.50

6Z\x 39.50

1Z\, x 4 51.00

5Z\x 51.00

1Z\v x 3Z\x 51.00

5Z\x 149.50

1C\, x 5C\v 175.00

1Z\x x 4Z\x 166.00

5C\v 187.00

1C\v x 6 328.50

1M\, x 6 434.50


go-no-go tape Item Part No. Price Each Price Per Box *

Go-No-Go Tape (1) # RW75-100-MCH $47.50 –

Go-No-Go Tape (Box of 6) # RW75-100-KIT – $264.50


* Each box contains 6 Go-No-Go Tapes.

# Tool discount applies.


Spare PartsSe

ctI

oN

1

SPa

re

Pa

rtS

grooved ips pipe fittings

elbowsRequest publication 07.01.

No. 10

No. 11

eLBowS – 90° eLBow or 45° eLBow

Nom. Size 90° Elbow No. 10 45° Elbow No. 11

Inches

Aprx. Wgt. Ea.

Lbs.C - E

Inches

Price Each Aprx. Wgt. Ea.

Lbs.C - E

Inches

Price Each

Painted Galv. Painted Galv.

C\v 0.5 2.25 $107.50 $113.50 0.5 1.50 $107.50 $113.50

1 0.6 2.25 57.00 76.00 0.6 1.75 57.00 72.00

1Z\v 1.0 2.75 57.00 76.00 0.9 1.75 57.00 72.00

1Z\x 1.2 2.75 57.00 76.00 0.9 1.75 57.00 72.00

2 1.8 3.25 57.00 76.00 1.3 2.00 57.00 72.00

2Z\x 3.2 3.75 57.00 76.00 2.2 2.25 57.00 72.00

3 4.5 4.25 101.00 126.50 3.1 2.50 101.00 119.50

3Z\x 5.6 4.50 117.00 155.00 3.95 2.75 117.00 155.00

4 13.3 5.00 110.00 154.00 5.6 3.00 110.00 143.00

4Z\x 10 (sw) 5.25 + + 6.0 (sw) 3.13 + +

5 11.7 5.50 263.50 341.00 8.3 3.25 263.50 327.00

6 17.2 6.50 309.50 410.50 10.8 3.50 309.50 391.00

8 29.9 7.75 646.00 851.50 20.4 4.25 646.00 811.00

10 63.3 9.00 1174.00 1521.00 37.5 4.75 1174.00 1281.00

12 74.0 10.00 1880.00 2426.00 66.7 5.25 1880.00 2191.50


(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.


ags elbowsRequest publication 20.05.

VICT

AULI

C

No.W10

No. w10

VICT

AULI

CN

o.W

11

No. w11

aGS eLBowS – 90° eLBow or 45° eLBow

Nom. Size 90° Elbow No. W10 45° Elbow No. W11

Inches

Aprx. Wgt. Ea.

LbsC - E

Inches


LbsC - E

Inches

Price Each


14 150.8 14.00 $2089.00 $2710.50 63.0 5.80 $1564.00 $2002.50

16 184.3 16.00 2712.50 3508.50 93.8 6.63 1760.50 2185.50

18 272.3 18.00 3442.50 4290.50 129.0 7.46 2063.50 2529.50

20 312.0 20.00 4538.00 5630.50 165.3 8.28 2710.50 3332.00

24 559.8 24.00 6571.00 8180.00 264.5 9.94 4162.50 5072.50


NOTE: Large diameter 14 – 24” steel fittings are supplied standard with AGS roll grooves.Original cut grooved fittings require the use of non-AGS Style 77 couplings. Original cut grooved fittings are non-cancellable and non-returnable. Contact Victaulic for cut groove pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls.

33

Grooved IPS Pipe fittings


SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

elbowsRequest publication 07.01.

No. 12 StaNdard & GooSeNeck

No. 13

eLBowS – 22Z\x° eLBow or 11Z\v° eLBow

Nom. Size 22Z\x° Elbow No. 12 11Z\v° Elbow No. 13

Inches

Aprx. Wgt. Ea.

LbsC - E

Inches


LbsC - E

Inches

Price Each


1 0.6 ‡ 3.25 $363.00 $376.00 0.3 (sw) 1.38 $144.50 +

1Z\v 0.8 1.75 62.00 79.00 0.5 1.38 62.00 $79.00

1Z\x 0.8 1.75 62.00 79.00 0.5 1.38 62.00 79.00

2 1.4 ‡ 3.75 62.00 79.00 1.0 1.38 144.50 169.00

2Z\x 1.5 ‡ 4.00 62.00 79.00 1.5 1.50 144.50 169.00

3 3.1 ‡ 4.50 89.50 113.00 2.1 1.50 89.50 112.00

3Z\x 4.0 (sw) 2.50 211.00 282.50 2.7 (sw) 1.75 211.00 249.00

4 5.6 2.88 119.00 154.00 3.6 1.75 110.00 146.50

5 7.8 (sw) 2.88 366.00 441.50 5.0 (sw) 2.00 366.00 430.50

6 12.2 ‡ 6.25 334.50 426.50 7.0 2.00 334.50 404.50

8 20.0 ‡ 7.75 698.00 867.00 10.1 2.00 596.50 708.50

10 30.0 4.38 956.50 1242.00 11.8 2.13 892.50 1066.00

12 40.0 4.88 1293.00 1603.00 29.3 2.25 1293.00 1566.00




‡ Gooseneck design.

ags elbowsRequest publication 20.05.

No. w12

No. w13

aGS eLBowS – 22Z\x° eLBow or 11Z\v° eLBow

Nom. Size 22Z\x° Elbow No. W12 11Z\v° Elbow No. W13

Inches

Aprx. Wgt. Ea.

LbsC - E

Inches


LbsC - E

Inches

Price Each


14 46.0 5.00 $1236.00 $1636.50 32.0 3.50 $1118.00 $1403.00

16 58.0 5.00 1482.50 2076.00 42.0 4.00 1377.00 1835.50

18 65.0 5.50 1795.00 2547.50 53.2 4.50 1667.00 2260.00

20 78.6 6.00 2253.50 3541.50 65.0 5.00 2040.50 2827.50

24 140.0 7.00 3845.50 4447.50 60.0 6.00 3561.00 3592.50



NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.


Grooved IPS Pipe fittingsSe

ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

long radius – 1Z\x d elbowsRequest publication 07.01.

No. 100

No. 110

LoNG radIUS – 90° LoNG radIUS eLBow or 45° LoNG radIUS eLBow

Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *

Inches

Aprx. Wgt. Ea.

LbsC - E

Inches


LbsC - E

Inches

Price Each


2 2.5 4.38 $130.50 $170.50 1.8 2.75 $113.00 $143.00

2Z\x 4.1 – 163.00 187.50 2.8 – 362.00 408.00

3 6.0 5.88 130.50 170.50 4.9 3.38 113.00 143.00

4 12.3 7.50 194.00 260.00 7.3 4.00 137.50 183.00

5 (s) 18.2 – 988.00 1132.00 14.8 – 917.50 1007.00

6 30.4 10.75 565.00 742.50 17.4 5.50 405.50 519.50

8 66.0 14.25 1351.50 1728.00 36.0 7.25 704.50 916.00

10 107.0 15.00 2800.00 3375.00 57.0 6.25 2100.00 2476.00

12 156.0 18.00 2829.50 3754.50 90.0 7.50 2431.50 2985.00



* See pages 52 – 55 for long radius 3-D, 5-D and 6-D elbows.

(s) steel. Victaulic fittings are made of ductile iron, except those marked (s)

ags long radius – 1Z\x d elbows

Request publication 20.05.

VICT

AULI

C

No.W10

0

No. w100

VICT

AULI

CN

o.W

110

No. w110

aGS LoNG radIUS – 90° LoNG radIUS eLBow or 45° LoNG radIUS eLBow

Nom. Size 90° Long Rad. Elbow No. W100 45° Long Rad. Elbow No. W110

Inches

Aprx. Wgt. Ea.

LbsC - E

Inches


LbsC - E

Inches

Price Each


14 154.0 21.00 $2785.00 $3614.00 77.0 8.75 $2085.50 $2669.50

16 201.0 24.00 3616.50 4677.00 100.0 10.00 2347.00 2913.50

18 256.0 27.00 4590.00 5720.50 128.0 11.25 2751.00 3372.50

20 317.0 30.00 6050.00 7507.00 158.0 12.50 3614.00 4442.00

24 458.0 36.00 8761.00 10906.00 229.0 15.00 5549.50 6763.00




35



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

reducing Base support elbowsRequest publication 07.01.

No. r-10G Grooved X� Grooved

No. r-10f Grooved X� fLaNGed

redUcING BaSe SUPPort eLBowS – Grooved X� Grooved or Grooved X� fLaNGed

Nom. Size Grooved x Grooved No. R-10G Grooved x Flanged No. R-10F

Inches Inlet x Outlet

Aprx. Wgt. Each

Lbs

Price Each Aprx. Wgt. Each

Lbs

Price Each


6 x 4 19.0 $941.00 $1104.00 33.0 $1045.00 +

6 x 5 23.0 1065.50 + 38.0 1183.00 +

8 x 6 33.0 1430.50 1687.50 51.0 1588.50 +

10 x 8 61.0 2141.00 2551.50 88.0 2379.00 +



drain elbow

No. 10-drRequest publication 10.05.

USA

Request Victaulicpublication 10.01 for details.

draIN eLBow

Nom. Size Aprx Wgt. Ea. Price Each

Inches Lbs Painted Galv.

2Z\x 5.2 $134.00 $173.00

3 5.3 171.50 205.50

4 8.8 174.50 237.00

6 18.7 307.00 436.50



ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

teesRequest publication 07.01.

No. 20

No. 29M

teeS – StaNdard tee or tee wItH tHreaded BraNcH

Nom. SizeAprx.

Wgt. Ea.Tee

No. 20

Tee with Male Threaded Branch No. 29M

Inches Lbs

Price Each Price Each


C\v 0.6 $115.50 $125.00 + +

1 1.0 88.50 116.00 – –

1Z\v 1.5 88.50 116.00 $186.50 $219.50

1Z\x 2.0 88.50 116.00 291.50 343.50

2 3.0 88.50 116.00 186.50 219.50

2Z\x 4.3 88.50 116.00 – –

3 6.8 122.00 167.50 – –

3Z\x 7.9 (sw) 497.50 + + +

4 11.9 186.00 253.00 387.00 532.00

4Z\x 15.0 (sw) + + – –

5 17.8 435.00 552.00 1113.50 +

6 25.7 502.00 685.00 994.00 1170.00

8 47.6 1100.50 1445.00 + +

10 73.0 2286.00 2960.00 + +

12 99.0 3186.00 4070.00 + +




ags teesRequest publication 20.05.

VICTAULICNo.W20

No. w20

aGS StaNdard tee

Nom. Size Aprx Wgt. Ea. Tee - No. W20

Inches Lbs

Price Each

Painted Galv.

14 102.0 $2796.50 $3482.50

16 123.5 3158.00 4011.00

18 318.0 3947.50 5089.50

20 369.0 5656.00 7170.50

24 560.0 8623.00 11184.00




37



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

cross and WyeRequest publication 07.01.

No. 35

No. 33

croSS aNd wye – SteeL croSS or SteeL 90 trUe y

Nom. SizeSteel Cross (sw)

No. 35Steel 90 True Y (sw)

No. 33

Inches

Aprx Wgt. Ea.

Lbs

Price Each Aprx Wgt. Ea.

Lbs

Price Each


C\v 0.9 + + – – –

1 1.3 $215.00 $248.00 1.1 + +

1Z\v 2.1 259.00 301.50 1.5 $330.50 +

1Z\x 2.5 279.00 323.50 1.8 330.50 $393.00

2 3.8 (d) 159.00 189.50 2.5 330.50 393.00

2Z\x 6.1 (d) 159.00 189.50 4.3 330.50 393.00

3 10.5 (d) 283.50 347.00 6.1 395.00 469.50

3Z\x 11.5 570.00 680.00 9.6 + +

4 15.8 (d) 470.50 579.00 10.0 517.00 622.50

4Z\x 18.5 + + – – –

5 20.0 959.50 1157.00 15.0 740.50 890.00

6 28.0 1232.50 1496.00 22.3 915.50 1114.50

8 48.0 1623.50 2008.50 36.0 1318.00 1620.00

10 121.5 2767.00 3422.50 69.9 2273.50 2785.00

12 110.0 3992.50 4975.00 80.0 2511.00 3177.00



(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.

ags cross and Wye


VICTAULICNo.W35

No. w35

VICT

AULI

C

No.W33

No. w33

aGS croSS aNd wye – SteeL croSS or SteeL 90 trUe y

Nom. SizeSteel Cross (sw)

No. W35Steel 90 True Y (sw)

No. W33

Inches

Aprx. Wgt. Ea.

Lbs


Lbs

Price Each


14 168.0 $3632.50 $4970.50 114.0 $2510.00 $3133.00

16 216.0 5237.00 6045.50 144.0 3488.50 4166.00

18 278.0 6388.00 7382.50 185.0 4067.50 4966.50

20 348.0 7624.00 10961.50 216.0 5443.00 6736.00

24 488.0 11076.00 15458.50 343.0 9706.00 10228.00






ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

adapter nipples ‡

Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x GroovedRequest publication 07.01.

No. 40

No. 42

No. 43

adaPter NIPPLeS – Grooved X� tHreaded, Grooved X� BeveLed, or Grooved X� Grooved

Nom. Size Price Per Length Inches

Inches 3 4 6 8 10 12

C\v $34.00 $34.00 + + + +

1 34.00 34.00 $54.00 + + +

1Z\v 34.00 34.00 54.00 + + +

1Z\x 34.00 34.00 54.00 $63.00 $72.50 $83.00

2 34.00 34.00 54.00 63.00 72.50 83.00

2Z\x 39.50 39.50 73.00 73.00 85.00 97.00

3 48.00 48.00 78.50 94.50 110.50 126.00

4 79.50 79.50* 79.50 131.00 154.00 177.50

5 164.50* 164.50* 164.50 229.50 283.50 326.00

6 211.50 211.50* 211.50* 273.50 317.50 361.50

8 237.00* 237.00* 237.00* 315.50 433.00 487.00

10 318.00* 318.00* 320.50* 345.00 532.50 633.50

12 432.50* 405.75* 432.50* 432.50 674.50 803.50


Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal sizes 8” and larger, from Schedule 30 pipe. NOTE: For Pump Package Nipples with 1 Z\x” hole cut to receive Style 923 Vic-Let or Style 924 Vic-O-Well add $81.50 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-cancellable and non-returnable.* These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.

Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application.GALVANIZED AND EXTRA HEAVY ARE NON-CANCELLABLE AND NON-RETURNABLE ITEMS.‡ Contact Victaulic for pricing on seamless adapter nipples.

NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.

ags adapter nipples

Same prices apply for: No. W42 AGS Grooved x Beveled No. W43 AGS Grooved x AGS Grooved No. W49 AGS Grooved x C606 GroovedRequest publication 20.05.

No. w42

No. w43

No. w49

aGS adaPter NIPPLeS – No. w42 aGS Grooved X� BeveLed, No. w43 aGS Grooved X� aGS Grooved, or No. w49 aGS Grooved X� c606 orIGINaL Grooved

Nom. Size Inches

Length Inches * Price Each

14 8 $648.00

16 8 740.00

18 8 1010.00

20 8 1136.00

24 8 1264.00


Please specify nipple style number when ordering.Unless otherwise specified, Adapter Nipples are constructed using standard wall pipe.* Other lengths available. Contact Victaulic for details.NOTE: For original roll grooved 14 – 24” adapters please contact your local Victaulic sales representative.

NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.

39



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

female threaded adapterRequest publication 07.01.

No. 80

feMaLe tHreaded adaPter

Nom. SizeAprx.

Wgt. EachNo. 80

Price Each

Inches Lbs Painted Galv.

C\v 1.0 $297.50 $329.50

1 1.0 318.50 342.00

1Z\v 1.5 168.00 188.00

1Z\x 1.5 218.00 232.00

2 1.4 102.50 120.50

2Z\x 1.5 102.50 120.50

3 2.9 119.00 146.00

4 4.5 182.50 229.00


Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.

adapter elbowsRequest publication 07.01.

No. 18

No. 19

adaPter eLBowS – 90° adaPter eLBow or 45° adaPter eLBow

Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19

Inches

Aprx. Wgt. Ea.

Lbs


Lbs

Price Each


C\v 0.5 $147.50 $157.50 0.5 $150.50 $159.50

1 0.5 99.00 123.00 0.6 – –

1Z\v 0.9 110.50 123.00 0.6 – –

1Z\x 1.1 141.00 164.00 0.9 163.00 174.50

2 2.5 99.00 123.00 1.9 – –

2Z\x 3.0 172.00 188.00 2.3 168.00 174.00

3 5.8 159.50 195.50 5.0 287.50 308.00

6 17.6 495.00 626.50 12.7 603.00 +






ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

reducing teeRequest publication 07.01.

No. 25

redUcING tee

Size Reducing Tee No. 25

Inches Aprx. Wgt. Each

Lbs

Price Each

Run x Branch Painted Galv.

1 x 1 x C\v 1.0 $152.50 $178.50

1Z\v x 1Z\v x 1 1.3 157.00 178.50

1Z\x x 1Z\x x C\v 1.5 159.00 +

1 1.5 219.00 225.00

1Z\v 1.7 165.50 183.50

2 x 2 x C\v (d) 2.5 206.50 243.00

1 (d) 2.7 188.00 221.00

1Z\v 1.8 235.00 247.00

1Z\x (d) 3.0 188.00 224.00

2Z\x x 2Z\x x C\v 3.9 254.00 275.50

1 (d) 3.8 188.00 221.00

1Z\v 4.2 284.00 334.50

1Z\x (d) 3.9 188.00 224.00

2 (d) 4.5 188.00 224.00

3 x 3 x C\v (d) 5.7 293.50 306.00

1 (d) 6.1 166.00 212.50

1Z\v 8.0 233.50 308.50

1Z\x (d) 6.5 166.00 214.50

2 (d) 6.2 166.00 214.50

2Z\x (d) 6.4 166.00 214.50

4 x 4 x C\v (d) 8.0 375.00 400.50

1 (d) 7.8 224.00 280.00

1Z\v 9.6 441.50 514.50

1Z\x (d) 10.2 224.00 280.00

2 (d) 11.2 224.00 294.50

2Z\x (d) 11.4 224.00 294.50

3 (d) 11.6 224.00 294.50

5 x 5 x 1 14.0 494.00 608.50

1Z\x 14.3 628.00 680.00

2 14.5 544.00 672.00

2Z\x (d) 15.2 443.00 558.00

3 (d) 16.6 443.00 558.00

4 (d) 16.7 479.50 606.00

6 x 6 x 1 23.0 596.50 731.00

1Z\x 24.0 616.00 844.50

2 (d) 21.6 528.00 693.50

2Z\x (d) 21.4 528.00 693.50

3 (d) 26.5 528.00 693.50

4 (d) 25.0 528.00 693.50

5 (d) 23.2 528.00 698.00

8 x 8 x 1Z\x 33.0 761.50 926.50

2 33.5 761.50 961.50

2Z\x 39.0 761.50 961.50

3 33.6 820.00 980.50





41



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

Size Reducing Tee No. 25


Lbs

Price Each


8 x 8 x 4 (d) 41.8 $1100.50 $1422.50

5 34.0 1100.50 1432.00

6 (d) 42.3 1100.50 1438.50

10 x 10 x 1Z\x 62.0 1877.00 2513.50

2 62.0 1326.50 2013.50

2Z\x 62.4 1326.50 1671.50

3 60.0 1326.50 2110.50

4 61.0 1386.50 1772.00

5 52.0 1417.00 1809.50

6 59.0 1417.00 2301.00

8 64.7 1443.00 2313.00

12 x 12 x 1 77.0 1785.50 +

2 80.0 2684.50 3245.50

2Z\x 78.0 1785.50 +

3 82.0 1785.50 2305.00

4 80.0 1913.00 2691.50

5 75.0 2023.00 2627.50

6 75.0 2047.00 3003.50

8 80.0 2104.00 3182.00

10 84.0 2202.00 3424.50







ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

ags reducing tee


VICTAULICNo.W25

No. w25

aGS redUcING tee *

Size Reducing Tee No. W25


Lbs

Price Each


14 x 14 x 6 142.0 $1756.00 $2252.00

8 143.0 1799.00 2289.50

10 144.0 1902.50 2425.50

12 147.0 2036.00 2608.00

16 x 16 x 6 176.0 2170.50 2805.50

8 185.0 2287.00 2899.00

10 195.0 2471.00 3131.00

12 204.0 2520.50 3202.00

14 210.0 2951.50 3670.50

18 x 18 x 8 231.0 2914.50 3855.00

10 244.0 3024.50 3895.50

12 254.0 3024.50 3933.50

14 262.0 3500.00 4500.00

16 269.0 3819.50 4824.50

20 x 20 x 8 282.0 3815.00 5065.50

10 295.0 3866.50 5124.50

12 308.0 4325.50 5523.50

14 316.0 4659.00 5931.00

16 329.0 4998.00 6335.00

18 342.0 5496.00 6949.00

24 x 24 x 8 381.0 5789.50 8389.00

10 394.0 6075.00 +

12 409.0 6246.00 8787.00

14 419.0 6967.00 9551.50

16 433.0 7123.50 9766.50

18 453.0 7255.50 9967.00

20 473.0 7877.00 11550.00




* Victaulic fittings listed are made of segmentally welded steel.


43



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

reducing tee with threaded BranchRequest publication 07.01.

No. 29t

redUcING tee wItH tHreaded BraNcH *

Size Reducing Tee No. 29T with Threaded Branch


Lbs

Price Each


2 x 2 x C\v (d) 2.5 $218.50 $256.50

1 (d) 2.7 199.00 233.50

1Z\v 2.9 335.00 358.00

1Z\x (d) 3.0 199.00 236.00

2Z\x x 2Z\x x C\v 3.5 391.00 403.50

1 (d) 3.8 199.00 233.50

1Z\v 3.8 435.50 447.50

1Z\x (d) 3.9 199.00 236.00

2 4.5 199.00 238.50

3 x 3 x C\v 5.9 365.50 388.00

1 (d) 6.1 199.00 248.50

1Z\v 6.3 491.50 523.00

1Z\x 6.5 199.00 250.50

2 6.2 199.00 250.50

2Z\x 6.4 480.00 520.00

4 x 4 x C\v 7.2 530.50 653.00

1 (d) 7.8 248.50 307.00

1Z\v 8.5 511.50 551.50

1Z\x (d) 9.2 248.50 312.00

2 (d) 11.2 248.50 312.00

2Z\x (d) 11.4 248.50 321.00

3 (d) 11.6 248.50 322.00

5 x 5 x 2 14.5 532.50 581.00

2Z\x (d) 15.2 479.00 607.00

3 16.6 443.00 558.00

4 16.7 479.00 653.00

6 x 6 x 1 23.0 727.50 845.50

1Z\x 25.0 643.50 809.50

2 (d) 21.6 622.00 775.00

2Z\x (d) 21.4 622.00 775.00

3 (d) 26.5 622.00 775.00

4 (d) 25.0 786.00 845.50

5 23.2 622.00 775.00

8 x 8 x 2 33.5 761.50 1050.50

3 33.6 1050.50 1362.00

4 (d) 41.8 1100.50 1422.50

5 34.0 1100.50 1431.00

6 (d) 42.3 1217.50 1673.00

10 x 10 x 2 62.0 1326.00 1937.50

3 60.0 1326.00 1645.00

4 61.0 1386.50 1772.00

5 52.0 1219.00 1809.50

6 59.0 1417.00 1832.50

8 64.7 1911.50 2137.50







ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

Size Reducing Tee No. 29T with Threaded Branch


Lbs

Price Each


12 x 12 x 3 80.0 $1785.50 $2305.50

4 82.0 1913.00 2457.00

5 75.0 2023.00 2627.50

6 75.0 2047.00 2652.00

8 80.0 2104.50 2713.50

10 84.0 2202.00 2717.00





reducersRequest publication 07.01.

No. 50

No. 51

redUcerS – coNceNtrIc or ecceNtrIc

Size Concentric Reducer No. 50 Eccentric Reducer No. 51

Inches

Aprx. Wgt. Ea.

Lbs


Lbs

Price Each


1Z\v x C\v 1.9 $259.00 $284.00 3.2 + +

1 1.9 271.00 298.50 3.2 + +

1Z\x x C\v 1.4 305.50 330.00 4.5 + +

1 0.8 (d) 67.00 78.50 4.5 $286.00 $335.00

1Z\v 1.0 (d) 67.00 78.50 4.5 279.50 +

2 x C\v 0.9 (d) 67.00 78.50 2.0 + +

1 0.7 (d) 67.00 78.50 2.3 315.50 354.00

1Z\v 1.2 (d) 73.00 86.00 4.6 345.00 +

1Z\x 1.0 (d) 67.00 78.50 4.6 69.50 82.50

2Z\x x C\v 1.3 531.50 574.00 3.3 799.50 900.50

1 3.3 91.00 105.00 3.5 744.50 824.50

1Z\v 3.3 (d) 67.00 78.50 3.5 74.00 86.50

1Z\x 3.6 (d) 67.00 78.50 3.7 344.00 393.00

2 3.9 (d) 67.00 78.50 4.3 (d) 140.00 191.00

3 x C\v 1.5 535.00 598.00 4.8 + +

1 1.3 (d) 73.00 89.00 4.8 799.00 878.50

1Z\v 3.0 117.50 135.50 4.8 723.50 +

1Z\x 5.1 (d) 80.50 98.50 5.1 397.00 464.50

2 1.6 (d) 59.00 72.00 6.0 (d) 160.00 219.00

2Z\x 1.6 (d) 80.50 97.50 7.0 (d) 160.00 224.00

3Z\x x 3 2.0 (d) 85.50 103.50 7.0 877.50 +

4 x 1 2.4 (d) 88.50 109.00 6.5 1617.50 +

1Z\v 4.6 684.50 767.00 - – –

1Z\x 6.9 123.00 162.00 8.1 978.50 1056.50

2 2.4 (d) 78.50 96.50 8.0 (d) 195.00 273.00

2Z\x 2.7 (d) 97.50 118.50 7.6 (d) 195.00 273.00

3 2.5 (d) 97.50 118.50 7.8 (d) 195.00 273.00

3Z\x 2.9 (d) 97.50 118.50 8.0 1369.50 +

5 x 2 9.0 963.00 1063.50 5.2 1079.00 +

2Z\x 11.0 199.00 242.50 10.8 919.50 +

3 4.9 (d) 113.00 140.00 11.1 888.50 990.50

4 4.3 (d) 134.50 169.00 12.0 (d) 265.50 375.00




45



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

Size Concentric Reducer No. 50 Eccentric Reducer No. 51

Inches

Aprx. Wgt. Ea.

Lbs


Lbs

Price Each


6 x 1 5.0 (d) $178.50 $223.00 14.5 $1676.50 $1820.00

1Z\x 5.5 + + + + +

2 6.6 (d) 178.50 223.00 14.5 1529.00 1664.50

2Z\x 14.2 (d) 199.00 244.50 14.2 1820.00 1981.50

3 6.4 (d) 178.50 223.00 15.0 (d) 353.00 495.00

4 6.5 (d) 156.00 202.00 17.0 (d) 309.00 454.50

5 6.4 (d) 230.50 286.50 17.0 (d) 370.50 526.00

8 x 3 9.3 (d) 318.50 397.00 22.0 1776.00 1934.00

4 10.4 (d) 318.50 399.50 23.0 1552.50 1771.00

5 11.6 (d) 318.50 402.00 23.0 1552.50 1771.00

6 11.9 (d) 405.00 507.50 24.0 (d) 624.50 850.50

10 x 4 19.7 (d) 755.00 930.00 32.0 2847.00 3414.50

5 36.3 1662.50 1897.00 34.0 2682.00 3156.50

6 20.0 (d) 825.50 1030.00 36.9 2023.00 2398.00

8 22.1 (d) 825.50 1047.00 40.3 1712.00 2129.50

12 x 4 44.0 3618.00 4306.00 48.0 2991.00 +

6 24.6 (d) 985.00 1217.50 50.0 2702.00 3254.00

8 52.0 (d) 1478.00 1745.50 53.5 2633.00 3151.50

10 38.0 (d) 1478.00 1830.50 57.0 2358.00 2796.50






ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

ags reducersRequest publication 20.05.

VICTAULICNo.W50

No. w50

VICTAULICNo.W51

No. w51

aGS redUcerS – coNceNtrIc or ecceNtrIc

Size Concentric Reducer No. W50 Eccentric Reducer No. W51

Inches

Aprx. Wgt. Ea.

Lbs


Lbs

Price Each


14 x 6 56.0 $4622.00 $5010.00 60.0 $5644.50 $6717.50

8 58.6 2619.50 2898.50 60.0 4274.00 4877.00

10 * 60.4 2289.50 2554.50 60.4 3909.50 4275.50

12 * 63.4 2506.00 2826.00 63.4 3797.00 4153.00

16 x 8 71.6 3752.50 4092.00 73.0 6234.00 +

10 73.8 3605.50 4092.00 73.0 5760.00 +

12 * 75.6 3654.00 4115.50 75.6 5665.50 6196.50

14 * 77.5 3654.00 4166.00 77.5 5545.00 6705.50

18 x 10 85.0 5004.00 6476.00 91.0 7834.50 +

12 88.1 5138.50 6707.50 91.0 7357.00 8460.50

14 * 90.9 4160.50 5242.00 90.9 6684.50 8084.00

16 * 94.0 4160.50 5242.00 94.0 6684.50 8435.00

20 x 12 130.0 5599.00 6785.50 130.0 7636.50 +

14 134.0 5621.50 6799.00 134.0 7847.00 +

16 * 138.0 4524.50 5575.50 138.0 7577.50 9164.50

18 * 142.0 4355.50 7465.00 142.0 7577.50 9563.00

24 x 10 145.0 + + - + +

12 150.0 + + - + +

14 161.0 + + 148.0 12736.00 +

16 159.0 10745.50 15569.50 159.0 12736.00 +

18 * 163.0 10281.50 12410.50 163.0 12013.00 14163.00

20 * 167.0 8273.00 10413.00 167.0 12156.00 15013.00




* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements.

swaged nipplesRequest publication 07.01.

No. 53 Grooved X� Grooved

No. 54 Grooved X� tHreaded

No. 55 tHreaded X� Grooved

SwaGed NIPPLeS

Nominal SizeAprx.

Wgt. Ea.

Steel Swaged Nipples

No. 53, 54, 55 Plated

Inches Lbs Price Each

2 x 1 2.0 $225.00

1Z\v 2.0 225.00

1Z\x 2.0 225.00

2Z\x x 1 3.0 225.00

1Z\v 3.0 225.00

1Z\x 3.0 225.00

2 3.0 194.00

3 x 1 4.5 284.00

1Z\v 4.5 284.00

1Z\x 4.5 284.00

2 4.5 211.50

2Z\x 4.6 211.50

3Z\x x 3 6.8 252.50

4 x 1 7.5 385.00

1Z\v 7.5 385.00

1Z\x 7.5 385.00

2 7.5 292.00

Nominal SizeAprx.

Wgt. Ea.

Steel Swaged Nipples

No. 53, 54, 55 Plated


4 x 2Z\x 7.5 $292.00

3 7.5 292.00

3Z\x 7.5 292.00

5 x 2 11.5 1068.00

3 11.5 825.00

4 11.5 679.00

6 x 1 17.0 2034.00

1Z\v 17.0 2034.00

1Z\x 17.2 2034.00

2 17.4 1505.00

2Z\x 17.4 1505.00

3 17.4 976.00

4 17.5 741.00

5 17.5 741.00

8 x 6 20.0 1832.50


47



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

reducer – male threaded small endRequest publication 07.01.

No. 52

redUcer – MaLe tHreaded SMaLL eNd

Nominal Size

Aprx. Wgt. Ea. Price Each

Inches Inlet x Outlet Lbs Painted Galv.

1Z\x x 1 0.8 $69.50 $85.50

1Z\v 0.8 73.00 86.00

2 x C\v 0.9 69.50 85.50

1 0.7 69.50 85.50

1Z\v 1.2 69.50 85.50

1Z\x 1.0 69.50 85.50

2Z\x x 1 (s) 1.0 94.00 108.50

1Z\v 1.2 99.00 122.00

1Z\x 1.3 103.50 122.00

2 1.4 69.50 85.50

3 x C\v (s) 1.2 503.50 536.50

1 1.3 76.00 91.50

1Z\x 1.5 85.50 102.50

2 1.5 85.50 102.50

2Z\x 1.7 103.50 122.00

4 x 1 2.3 98.00 118.50

1Z\x (s) 2.5 230.00 301.00

2 2.6 104.00 125.00

2Z\x 2.6 104.50 128.50

3 2.5 128.00 152.00

5 x 4 (s) 4.5 730.00 794.00

6 x 1 5.5 199.00 244.50

2 5.7 199.00 244.50

2Z\x 5.8 199.00 244.50

3 5.8 199.00 244.50

4 (s) 6.5 1199.00 1328.00

5 (s) 17.5 + +




(s) steel. Victaulic fittings are made of ductile iron, except those marked (s)



ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

lateralRequest publication 07.01.

No. 30

LateraL

Nom. Size 45° Lateral No. 30

Inches

Aprx. Wgt. Ea.

Lbs

Price Each

Painted Galv.

C\v 1.0 + +

1 1.7 + +

1Z\v 2.5 (d) $344.50 +

1Z\x 3.5 + +

2 4.6 (d) 344.50 $422.00

2Z\x 9.0 344.50 422.00

3 11.7 (d) 380.00 479.50

3Z\x 17.8 + +

4 22.2 (d) 585.50 730.00

5 21.8 855.50 1074.50

6 43.6 1378.00 1655.50

8 72.0 1984.00 2404.00

10 105.0 2799.00 3246.50

12 165.0 3383.50 4287.50




ags lateralRequest publication 20.05.

VIC

TAU

LIC

No.

W3

0

No. w30

aGS LateraL *

Nom. Size 45° Lateral No. W30

Inches

Aprx. Wgt. Ea.

Lbs

Price Each

Painted Galv.

14 276.0 $4106.00 $5268.00

16 344.2 5129.00 6587.50

18 429.0 5733.50 7452.50

20 500.0 8696.00 11019.00

24 715.0 13512.00 15744.50




* Victaulic fittings listed are made of segmentally welded steel.


49



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

capRequest publication 07.01.

No. 60

caP

Nom. Size Cap No. 60

Inches

Aprx. Wgt. Ea.

Lbs

Price Each

Painted Galv.

C\v 0.2 $116.50 $126.50

1 0.3 48.00 58.00

1Z\v 0.3 48.00 58.00

1Z\x 0.5 48.00 58.00

2 0.6 48.00 58.00

2Z\x 1.0 48.00 58.00

3 1.4 48.00 58.00

3Z\x 2.5 52.00 68.00

4 2.5 52.00 68.00

5 4.6 122.00 163.50

6 6.0 121.50 163.50

8 13.1 233.00 308.50

10 21.0 491.00 639.50

12 35.6 803.50 1023.00


Caps are malleable/ductile iron.

NOTE: Caps are available with taps. Contact Victaulic for pricing and availability. All tapped caps are non-cancellable and non-returnable.

ags capRequest publication 20.05.

VIC

TAU

LIC

No.

W6

0

No. w60

aGS caP

Nom. Size Cap No. W60

Inches

Aprx. Wgt. Ea.

Lbs

Price Each

Painted Galv.

14 35.0 $1435.50 $1643.00

16 44.0 1624.50 1940.00

18 58.0 1880.50 2222.00

20 79.0 2135.50 2550.50

24 105.0 2908.00 3363.00



NOTE: Caps are available with taps. Contact Victaulic for pricing and availability. All tapped caps are non-cancellable and non-returnable.




ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

reducing lateralsRequest publication 07.01.

No. 30r

redUcING LateraLS

Nominal Size Reducing Laterals No. 30R †

Inches

Aprx. Wgt. Each

Lbs

Price Each

Painted Galv.

3 x 3 x 2 9.8 $298.00 $372.50

2Z\x 9.8 298.00 +

4 x 4 x 2 10.0 585.50 698.00

2Z\x 10.0 585.50 723.00

3 18.3 585.50 729.00

5 x 5 x 2 24.0 855.50 +

3 27.0 855.50 1061.50

4 26.5 855.50 1078.00

6 x 6 x 3 37.0 1105.00 1382.00

4 36.5 1105.00 1392.00

5 44.7 1105.00 1407.50

8 x 8 x 4 62.0 1594.50 2023.50

5 75.5 1594.50 2042.00

6 82.0 1594.50 2067.00

10 x 10 x 4 104.8 1811.50 2380.50

5 99.0 + 2539.50

6 105.8 1987.00 2539.50

8 118.0 2024.50 2702.50

12 x 12 x 5 122.0 2349.00 +

6 137.0 2349.00 3144.00

8 147.0 2379.50 3214.50

10 167.0 2411.00 3320.00



† All No. 30R fittings are segmentally welded steel.

51



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

ags reducing laterals


No. w30r

aGS redUcING LateraLS

Nominal Size Reducing Laterals No. W30R

Inches

Aprx. Wgt. Each

Lbs

Price Each

Painted Galv.

14 x 14 x 4 162.4 $1813.50 $2728.50

6 167.6 1947.00 2911.50

8 173.5 2094.00 3293.50

10 181.0 2654.00 3478.00

12 189.2 2694.00 3860.50

16 x 16 x 6 206.7 2822.00 4016.00

8 213.1 2984.00 4803.00

10 221.1 3483.00 4752.50

12 229.9 3630.00 5097.50

14 230.9 3630.00 5097.50

18 x 18 x 6 253.1 3630.00 5097.50

8 259.9 3630.00 5097.50

10 285.0 + +

12 277.6 4034.00 5703.00

14 278.7 4829.50 6281.00

16 284.3 5432.50 7017.00

20 x 20 x 12 330.0 5191.50 7414.00

14 331.2 5351.50 7640.50

16 337.2 6313.00 8775.00

24 x 24 x 16 448.5 11983.50 15431.00

18 515.0 + +

20 461.8 13035.50 15941.00




† All No. W30R fittings are segmentally welded steel.




ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

tee WyesRequest publication 07.01.

No. 32

tee wyeS

Nominal Size Tee Wye No. 32 †

Inches

Aprx. Wgt. Each

Lbs

Price Each

Painted Galv.

2 x 2 x 2 6.4 $599.50 $714.50

2Z\x x 2Z\x x 2Z\x 11.5 599.50 714.50

3 x 3 x 3 14.3 687.00 830.00

3Z\x x 3Z\x x 3Z\x 22.9 + +

4 x 4 x 3 23.0 828.50 1003.00

4 26.0 954.00 1161.00

5 x 5 x 3 29.0 1199.50 1406.00

4 36.7 1382.00 1543.50

5 48.0 2031.50 2481.50

6 x 6 x 3 37.3 982.00 1268.00

4 46.3 1197.00 1496.50

5 55.0 + +

6 60.5 1821.50 2253.00

8 x 8 x 3 76.0 1169.50 1699.50

4 76.4 1393.50 1921.00

5 85.6 1845.00 2427.50

6 112.0 2012.00 2631.50

8 127.1 2772.50 3515.50

10 x 10 x 3 96.0 1611.50 2234.50

4 97.4 1767.50 2427.50

5 115.1 + 2961.50

6 133.1 2345.00 3111.00

8 156.0 3042.00 3914.00

10 190.0 3973.00 5094.50

12 x 12 x 12 240.0 5478.50 6956.50



† All No. 32 fittings are segmentally welded steel.

reducing tee WyesRequest publication 07.01.

No. 32r

redUcING tee wyeS

Nominal Size Reducing Tee Wye No. 32R †

Inches

Aprx. Wgt. Each

Lbs

Price Each

Painted Galv.

4 x 3 x 3 16.0 $887.00 $1054.50

4 16.0 1261.00 1511.50

5 x 3 x 3 25.0 1199.50 1406.00

5 43.4 + +

5 x 4 x 3 21.0 + +

4 25.0 + +

6 x 4 x 6 61.0 + +

6 x 5 x 3 27.0 + +

4 31.0 + +

8 x 6 x 4 45.0 + 2820.00

8 112.0 + +



† All No. 32R fittings are segmentally welded steel.

53



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

Bull plugsRequest publication 07.01.

No. 61

eLectroPLated SteeL BULL PLUGS

Nom. SizeElectroplated

Steel Bull Plug No. 61

Inches

Aprx. Wgt. Ea.

Lbs Price Each

2 2.0 $175.00

2Z\x 3.0 175.00

3 4.5 256.00

4 7.5 330.00

5 12.0 719.50

6 17.0 776.00


Other sizes available upon request. Contact Victaulic for details.

hose nipplesRequest publication 07.01.

No. 48

SteeL HoSe NIPPLeS

Nom. SizeLength Inches Steel Hose Nipple No. 48

Inches End to End

Aprx. Wgt. Ea.

Lbs

Price Each

Painted Galv.

C\v 3.25 0.3 $114.00 $136.00

1 3.25 0.4 114.00 +

1Z\v 3.63 0.6 114.00 +

1Z\x 4.00 0.8 114.00 136.00

2 4.63 1.1 114.00 136.00

2Z\x 5.50 2.0 114.00 136.00

3 6.00 3.2 164.50 198.50

4 7.25 4.9 286.00 344.50

5 9.75 8.0 432.50 +

6 10.12 14.3 514.00 +

8 12.50 24.7 1068.00 +

10 14.00 40.1 1089.00 +

12 16.00 62.0 + +



flanged adapter nipplesRequest publication 07.01.

No. 41

NoS. 45 & 46

fLaNGed adaPter NIPPLeS – 125 LB, 150 LB, or 300 LB *

Size x Length No. 41 – 125 lb No. 45 – 150 lb No. 46 – 300 lb

Inches Black Galv. Black Galv. Black Galv.

1 x 3 + + + + + +

1Z\v x 4 + + + + + +

1Z\x x 4 $283.00 $613.00 $243.00 $383.50 $279.50 +

2 x 4 243.00 362.50 243.00 383.50 298.50 $351.00

2Z\x x 4 303.00 466.50 486.00 572.50 298.50 351.00

3 x 4 390.50 591.50 497.50 591.50 414.50 524.00

3Z\x x 4 + + + + + +

4 x 6 568.00 887.00 567.50 827.00 781.00 893.00

5 x 6 924.00 + 785.00 1088.00 799.50 +

6 x 6 998.50 1804.00 799.50 1103.00 799.50 1207.50

8 x 6 1425.50 3141.00 989.50 1474.00 1636.00 1945.50

10 x 8 2345.00 5871.50 1553.00 2328.00 2105.50 +

12 x 8 3833.00 8424.50 2126.00 3070.00 2967.00 +



* Raised face flanges are standard; flat flanges are quoted on application.



ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

ags flanged adapter nipple


No. w45

aGS fLaNGed adaPter NIPPLeS – aNSI 150

Nom. SizeAprx.

Wgt. Ea. AGS Flanged Adapter Nipple – No. W45 *

Inches Lbs

Price Each

Painted Galv.

14 x 8 122.0 $3877.50 $4313.00

16 x 8 136.0 4620.50 5364.50

18 x 8 168.0 5115.50 5568.50

20 x 8 208.0 5366.00 5806.00

24 x 8 274.0 5618.00 6044.50



* Raised face flanges are standard; flat flanges are quoted on application.


3d cast elbow

for aBraSIve ServIceSRequest publication 07.02.

90° 3d caSt eLBow

45° 3d caSt eLBow

3d caSt eLBowS – 90° eLBow or 45° eLBow

Fitting Size 90° Elbow 45° Elbow

Inches

Aprx. Wgt. Ea.

LbsCenter to End

Inches Price Each

Aprx. Wgt. Ea.

Lbs

Center to End Inches Price Each

2 5.0 10.00 $347.00 4.7 6.50 $339.00

3 16.0 13.00 515.00 10.4 7.75 494.00

4 22.5 16.00 813.50 17.2 9.00 761.00

6 70.0 24.00 1657.00 45.0 13.50 1124.50



55



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

3d long radius steel elbowsRequest publication 07.02.

No. 10-3d 90° eLBow



3d LoNG radIUS eLBowS – 90° eLBow, 60° eLBow, or 45° eLBow

Nom. Size90° Elbow No. 10-3D

60° Elbow No. 14-3D


Inches

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

2 5.3 + 4.3 + 3.9 +

2Z\x 9.5 + 7.7 + 6.7 +

3 14.0 + 11.0 + 9.5 +

3Z\x 18.6 + 14.4 + 12.3 +

4 24.1 + 18.5 + 15.7 +

4Z\x 31.6 + 24.2 + 20.5 +

5 40.9 + 31.3 + 26.5 +

6 63.7 + 48.8 + 41.3 +

8 127.8 + 97.9 + 82.9 +

10 226.4 + 173.4 + 146.9 +

12 332.7 + 254.8 + 215.9 +

14 † 427.3 + 327.3 + 277.3 +

16 † 560.1 + 429.0 + 363.5 +

18 † 710.7 + 544.4 + 461.3 +

20 † 879.3 + 673.5 + 570.7 +

24 † 1270.3 + 973.0 + 824.4 +



Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic.

† For cut groove systems only. Cut groove systems require the use of non-AGS Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.


No. 12-3d 22Z\x° eLBow

No. 13-3d 11Z\v° eLBow

3d LoNG radIUS eLBowS – 30° eLBow, 22Z\x° eLBow, or 11Z\v° eLBow


22Z\x° ElbowNo. 12-3D

11Z\v° ElbowNo. 13-3D

Inches

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

2 3.4 + 3.2 + 2.8 +

2Z\x 5.8 + 5.3 + 4.6 +

3 7.3 + 7.3 + 6.2 +

3Z\x 10.2 + 9.2 + 7.6 +

4 12.8 + 11.4 + 9.3 +

4Z\x 16.8 + 14.9 + 12.2 +

5 21.8 + 19.4 + 15.8 +

6 33.9 + 30.1 + 24.6 +

8 68.0 + 60.5 + 49.3 +

10 120.5 + 107.2 + 87.3 +

12 177.0 + 157.5 + 128.3 +

14 † 227.3 + 202.3 + 164.8 +

16 † 297.9 + 265.2 + 216.0 +

18 † 378.1 + 336.5 + 274.1 +

20 † 467.8 + 416.3 + 339.2 +

24 † 675.7 + 601.4 + 490.0 +



Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic.




ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS









Inches

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

2 7.2 + 5.6 + 4.8 +

2Z\x 13.3 + 10.2 + 8.6 +

3 19.9 + 15.0 + 12.5 +

3Z\x 26.9 + 20.0 + 16.5 +

4 35.4 + 26.0 + 21.3 +

4Z\x 46.3 + 34.0 + 27.9 +

5 60.0 + 44.1 + 36.1 +

6 93.5 + 68.6 + 56.2 +

8 187.6 + 137.7 + 112.8 +

10 332.4 + 244.1 + 199.9 +

12 488.4 + 358.6 + 293.7 +

14 † 627.4 + 460.7 + 377.3 +

16 † 822.2 + 603.8 + 494.5 +

18 † 1043.4 + 766.2 + 627.6 +

20 † 1290.9 + 947.9 + 776.4 +

24 † 1864.8 + 1369.3 + 1121.6 +











Inches

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

2 4.0 + 3.6 + 3.0 +

2Z\x 7.0 + 6.2 + 5.0 +

3 10.0 + 8.8 + 6.9 +

3Z\x 13.0 + 11.3 + 8.7 +

4 16.6 + 14.3 + 10.7 +

4Z\x 21.7 + 18.6 + 14.0 +

5 28.1 + 24.1 + 18.2 +

6 43.8 + 37.6 + 28.3 +

8 87.9 + 75.4 + 56.8 +

10 155.8 + 133.7 + 100.6 +

12 228.9 + 196.4 + 147.8 +

14 † 627.0 + 252.3 + 189.8 +

16 † 385.3 + 330.7 + 248.8 +

18 † 489.0 + 419.7 + 315.7 +

20 † 605.0 + 519.2 + 390.6 +

24 † 873.9 + 750.1 + 564.3 +




57



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S









Inches

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

2 8.2 + 6.3 + 5.3 +

2Z\x 15.2 + 11.4 + 9.5 +

3 22.9 + 17.0 + 14.0 +

3Z\x 31.1 + 22.8 + 18.6 +

4 41.1 + 29.8 + 24.1 +

4Z\x 53.7 + 39.0 + 31.6 +

5 69.6 + 50.5 + 40.9 +

6 108.4 + 78.6 + 63.7 +

8 217.5 + 157.7 + 127.8 +

10 385.4 + 279.4 + 226.4 +

12 566.2 + 410.5 + 332.7 +

14 † 727.4 + 527.4 + 427.3 +

16 † 953.3 + 691.1 + 560.1 +

18 † 1209.7 + 877.1 + 710.1 +

20 † 1496.6 + 1085.1 + 879.3 +

24 † 2162.0 + 1567.5 + 1270.3 +











Inches

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

Aprx. Wgt. Ea.

Lbs Price Each

2 4.3 + 3.9 + 3.2 +

2Z\x 7.7 + 6.7 + 5.3 +

3 11.0 + 9.5 + 7.3 +

3Z\x 14.4 + 12.3 + 9.2 +

4 18.5 + 15.7 + 11.4 +

4Z\x 24.2 + 20.5 + 14.9 +

5 31.3 + 26.5 + 19.4 +

6 48.8 + 41.3 + 30.1 +

8 97.9 + 82.9 + 60.5 +

10 173.4 + 146.9 + 107.2 +

12 254.8 + 215.9 + 157.5 +

14 † 327.3 + 277.3 + 202.3 +

16 † 429.0 + 363.5 + 265.2 +

18 † 544.4 + 461.3 + 336.5 +

20 † 673.5 + 570.7 + 416.3 +

24 † 973.0 + 824.4 + 601.4 +






ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

extra heavy “es” endseal® fittings

elbows and teesRequest publication 07.03.

No. 62

No. 63

No. 64

eLBowS aNd teeS – 90° eLBow, 45° eLBow, or tee

Pipe Inches 90° Elbow No. 62 45° Elbow No. 63 Tee No. 64

Nominal Size Actual Size

Price Each

Painted Painted Painted

2 (d) 2.375 $250.50 $327.50 $417.00

2Z\x 2.875 347.00 327.50 526.50

3 (d) 3.500 267.00 327.50 566.00

4 (d) 4.500 351.00 434.50 646.50

6 6.625 1288.00 700.00 1362.50



For sizes to 12”, contact Victaulic. Steel Full Flow Elbows available with longer center to end dimensions. Contact Victaulic for details.


59



SectIo

N 1

G

ro

oved

IPS

PIPe

fIttING

S

clearflow * dielectric Waterway


Grooved X� tHreaded

tHreaded X� tHreaded

StyLe 47 – Grooved X� tHreaded or tHreaded X� tHreaded

PIPE Inches End to End Price Number of Pieces

Aprx. Wgt. per Box

Nominal Size Outside Diameter Inches per Unit per Box Lbs

Grooved x Threaded

1 1.315 4 $43.00 25 9.0

1Z\v 1.660 4 57.00 10 6.0

1Z\x 1.900 4 67.00 10 8.0

2 2.375 4 68.00 10 10.0

2Z\x 2.875 6 92.50 6 10.0

3 3.500 6 167.50 6 12.0

4 4.500 6 224.00 6 27.0

Threaded x Threaded

Z\x 0.657 3 $23.00 25 5.0

C\v 1.050 3 23.00 25 6.0

1 1.315 4 34.50 25 12.0

1Z\v 1.660 4 49.50 10 6.0

1Z\x 1.900 4 60.00 10 8.0

2 2.375 4 68.00 10 10.0

2Z\x 2.875 6 92.50 6 10.0

3 3.500 6 167.50 6 12.0

4 4.500 6 224.00 6 27.0

* ClearFlow is a registered trademark of Perfection Corp.


steel (ips) to copper (cts) transition fitting

StyLe 47-GGRequest publication 09.12.

2 – 3” Grooved X� Grooved

4 – 8” Grooved X� Grooved

StyLe 47-GG – SteeL (IPS) to coPPer (ctS) traNSItIoN fIttING

PIPE Inches End to End Price

Number of Pieces

Aprx. Wgt. per Box

Nominal Size

Outside Diameter

Inches per Unit per Box LbsSteel (IPS) Copper (CTS)

2 2.375 2.125 4.19 $116.00 10 18.0

2Z\x 2.875 2.625 6.19 130.50 6 34.0

3 3.500 3.125 6.19 200.50 6 28.0

4 4.500 4.125 6.19 402.50 6 36.0

5 5.563 5.125 6.19 449.50 1 8.0

6 6.625 6.125 6.19 557.00 1 12.0

8 8.625 8.125 6.19 671.50 1 16.0




ctI

oN

1

Gr

oo

ved

IP

S P

IPe

fIt

tIN

GS

Hole cut Products


mechanical-t® outlet

StyLeS 920 aNd 920NRequest publication 11.02.

StyLe 920 feMaLe

StyLe 920 – feMaLe tHreaded BraNcH

Size StyleComplete Mechanical-T

Female Threaded Branch † Spare Parts

Inches Run x Brch. Number

Aprx. Wgt. Ea.

Lbs

Price EachBolts & Nuts Size

Inches

Standard Grade “E” or “T”

GasketsPainted Galv.

2 x Z\x 920N 3.1 $55.50 $70.00 Z\x x 2C\v +

C\v 920N 3.1 55.50 70.00 Z\x x 2C\v +

1 920N 3.0 55.50 70.00 Z\x x 2C\v $10.50

1Z\v 920N 3.5 64.00 80.00 Z\x x 2C\v 12.00

1Z\x 920N 3.6 64.00 80.00 Z\x x 2C\v 12.00

2Z\x x Z\x 920N 3.0 55.50 70.00 Z\x x 2C\v +

C\v 920N 3.0 55.50 70.00 Z\x x 2C\v +

1 920N 2.9 55.50 70.00 Z\x x 2C\v 10.50

1Z\v 920N 3.5 78.50 96.00 Z\x x 3Z\v 12.00

1Z\x 920N 3.6 78.50 96.00 Z\x x 3 12.00

3 x Z\x 920N 3.4 64.00 78.50 Z\x x 2C\v +

C\v 920N 3.4 64.00 78.50 Z\x x 2C\v +

1 920N 3.3 64.00 78.50 Z\x x 2C\v 10.50

1Z\v§ 920N 3.8 81.50 102.50 Z\x x 2C\v 12.00

1Z\x§ 920N 4.1 81.50 102.50 Z\x x 2C\v 12.00

2 § 920N 4.9 94.00 117.00 Z\x x 3Z\v 12.00

4 x Z\x 920N 3.7 81.00 97.00 Z\x x 2C\v +

C\v 920N 3.7 81.00 97.00 Z\x x 2C\v +

1 920N 3.6 81.00 97.00 Z\x x 2C\v 10.50

1Z\v 920N 4.0 95.50 112.50 Z\x x 2C\v 12.00

1Z\x 920N 4.2 99.50 125.00 Z\x x 2C\v 12.00

2 920N 5.0 99.50 126.00 Z\x x 2C\v 12.00

2Z\x 920 5.8 103.50 134.50 1 x 2C\v 14.00

3 920 8.4 110.50 142.00 1 x 3Z\v 15.50

5 x 1Z\x 920 7.7 121.50 154.00 B\, x 4C\v 12.00

2 920 8.2 121.50 154.00 B\, x 4C\v 12.00

2Z\x 920 8.3 128.00 163.50 B\, x 4C\v 14.00

3 920 8.4 136.50 176.00 B\, x 4C\v 15.50

6 x 1Z\v 920N – – – Z\x x 2C\v 12.00

1Z\x 920N 5.1 124.50 159.50 Z\x x 2C\v 12.00

2 920N 5.6 124.50 159.50 Z\x x 2C\v 12.00

2Z\x 920 7.6 134.00 173.50 B\, x 4C\v 14.00

3 920 8.4 142.50 183.50 B\, x 4C\v 15.50

4 920 10.1 158.00 206.00 B\, x 4C\v 21.00

8 x 2 920 11.6 218.00 276.00 C\v x 4Z\v 14.50

2Z\x 920 11.6 218.00 276.00 C\v x 4Z\v 14.50

3 920 12.6 230.50 292.00 C\v x 4Z\v 15.50

4 920 15.3 237.00 307.00 C\v x 4Z\v 21.00


Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.

§ Requires Z\x x 3Z\v” bolts when used in cross configuration.

† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.


Hole cut ProductsSe

ctI

oN

2

Ho

Le c

Ut

Pr

od

Uc

tS

mechanical-t® outlet

StyLeS 920/920NRequest publication 11.02.

StyLe 920 Grooved

StyLe 920 – Grooved BraNcH

Size StyleComplete Mechanical-T

Grooved Branch Spare Parts

Inches Run x Brch. Number

Aprx. Wgt. Ea.

Lbs

Price EachBolts & Nuts Size

Inches

Standard Grade “E” or “T”

GasketsPainted Galv.

2 x Z\x 920N – – – – –

C\v 920N – – – – –

1 920N – – – – $10.50

1Z\v 920N 3.5 $64.00 $80.00 Z\x x 2C\v 12.00

1Z\x 920N 3.2 64.00 80.00 Z\x x 2C\v 12.00

2Z\x x Z\x 920N – – – – –

C\v 920N – – – – –

1 920N – – – – 10.50

1Z\v 920N 3.2 78.50 96.00 Z\x x 3Z\v 12.00

1Z\x 920N 3.3 78.50 96.00 Z\x x 3 12.00

3 x Z\x 920N – – – – –

C\v 920N – – – – –

1 920N – – – – 10.50

1Z\v§ 920N 3.7 81.50 102.50 Z\x x 2C\v 12.00

1Z\x§ 920N 3.8 81.50 102.50 Z\x x 2C\v 12.00

2 § 920N 4.6 94.00 117.00 Z\x x 3Z\v 12.00

3Z\x x 2 920N 5.0 369.50 461.50 Z\x x 2C\v 12.00

4 x Z\x 920N – – – – –

C\v 920N – – – – –

1 920N – – – – 10.50

1Z\v 920N 3.6 95.50 112.50 Z\x x 2C\v 12.00

1Z\x 920N 3.9 99.50 125.00 Z\x x 2C\v 12.00

2 920N 4.6 99.50 126.00 Z\x x 2C\v 12.00

2Z\x 920 5.0 103.50 134.50 Z\x x 2C\v 14.00

3 920 6.4 110.50 142.00 Z\x x 3Z\v 15.50

5 x 1Z\x 920 7.6 121.50 + B\, x 4C\v 12.00

2 920 8.0 121.50 + B\, x 4C\v 12.00

2Z\x 920 7.9 128.00 + B\, x 4C\v 14.00

3 920 8.8 136.50 176.00 B\, x 4C\v 15.50

6 x 1Z\v 920N 4.8 124.50 159.50 Z\x x 2C\v 12.00

1Z\x 920N 5.1 124.50 159.50 Z\x x 2C\v 12.00

2 920N 5.6 124.50 159.50 Z\x x 2C\v 12.00

2Z\x 920 8.3 136.50 173.50 B\, x 4C\v 14.00

3 920 9.9 142.50 183.50 B\, x 4C\v 15.50

4 920 10.1 158.00 206.00 B\, x 4C\v 21.00

8 x 2 920 – 204.50 + C\v x 4Z\v +

2Z\x 920 11.6 218.00 276.00 C\v x 4Z\v 14.50

3 920 11.6 230.50 292.00 C\v x 4Z\v 15.50

4 920 12.5 237.00 307.00 C\v x 4Z\v 21.00


Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.


63

Hole cut Products


SectIo

N 2

H

oLe

cU

t Pr

od

Uc

tS

Vic-tap® ii * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi.

Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II.

Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.

Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).

* Parts A & B can be purchased separately.

Tool Model Part NumberShipping Weight

LbsRental

Per Month List Price

Vic-Tap II - Parts A and B only R-000-902-VT2 70 $3011.00 $6616.00

Part A only R-100-902-VT2 – – 4512.00

Part B only R-300-901-VT1 – – 4520.00

Part C 4 x 2Z\x R-016-931-010 – – 1325.00

5 x 2Z\x R-020-931-010 – – 1325.00

6 x 2Z\x R-024-931-010 – – 1325.00

8 x 2Z\x R-032-931-010 – – 1384.50

NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $472.00. Part. No. N-E15-000-004.


Hole cut ProductsSe

ctI

oN

2

Ho

Le c

Ut

Pr

od

Uc

tS

mechanical-t cross

StyLe 920/920N † Request publication 11.03.

The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order.StyLeS 920/920N – MecHaNIcaL-t croSS

Nominal Size Inches Style

COMPLETE MECHANICAL-T CROSS with “E” or “T” Gasket †

Run x Branch

Number Painted Galv. A B

2 x 2 x Z\x x Z\x 920N + +

Z\x x C\v 920N + +

Z\x x 1 920N + +

Z\x x 1Z\v 920N + +

Z\x x 1Z\x 920N + +

C\v x C\v 920N + +

C\v x 1 920N + +

C\v x 1Z\v 920N + +

C\v x 1Z\x 920N + +

1 x 1 920N $88.50 $113.50

1 x 1Z\v 920N 101.00 130.50

1 x 1Z\x 920N 101.00 130.50

1Z\v x 1Z\v 920N 101.00 130.50

1Z\x x 1Z\v 920N 101.00 130.50

1Z\x x 1Z\x 920N 101.00 130.50

2Z\x x 2Z\x x Z\x x Z\x 920N + +

Z\x x C\v 920N + +

Z\x x 1 920N 88.50 113.50

Z\x x 1Z\v 920N + +

Z\x x 1Z\x 920N + +

C\v x C\v 920N + +

C\v x 1 920N + +

C\v x 1Z\v 920N + +

C\v x 1Z\x 920N + +

1 x 1 920N 88.50 113.50

1 x 1Z\v 920N 122.00 157.50

1 x 1Z\x 920N 122.00 +

1Z\v x 1Z\v 920N 122.00 157.50

1Z\x x 1Z\v 920N + 157.50

1Z\x x 1Z\x 920N 122.00 130.50

3 x 3 x Z\x x Z\x 920N + +

Z\x x C\v 920N + +

Z\x x 1 920N + +

Z\x x 1Z\v 920N + +

Z\x x 1Z\x 920N + +

Z\x x 2 920N + +




† Style 920 and Style 920N housings cannot be mated to achieve cross connections.Refer to publication 21.03, or contact Victaulic for details.‡ Available grooved only.


65

Hole cut Products


SectIo

N 2

H

oLe

cU

t Pr

od

Uc

tS



Run x Branch


3 x 3 x C\v x C\v 920N $99.50 $128.00

C\v x 1 920N + +

C\v x 1Z\v 920N + +

C\v x 1Z\x 920N + +

C\v x 2 920N + +

1 x 1 920N 99.50 128.00

1 x 1Z\v 920N 122.00 122.00

1 x 1Z\x 920N 122.00 152.50

1 x 2 920N + +

1Z\v x 1Z\v§ 920N 122.00 152.50

1Z\x x 1Z\v§ 920N 122.00 152.50

1Z\x x 1Z\x§ 920N 122.00 152.50

2 x 1Z\v§ 920N + +

2 x 1Z\x 920N + +

2 x 2 § 920N 141.00 175.00

4 x 4 x Z\x x Z\x 920N + +

Z\x x C\v 920N + +

Z\x x 1 920N + +

Z\x x 1Z\v 920N + +

Z\x x 1Z\x 920N + +

Z\x x 2 920N + +

C\v x C\v 920N + +

C\v x 1 920N + +

C\v x 1Z\v 920N + +

C\v x 1Z\x 920N + +

C\v x 2 920N + +

1 x 1 920N 122.00 158.50

1 x 1Z\v 920N + +

1 x 1Z\x 920N + +

1 x 2 920N + +

1Z\v x 1Z\v 920N 148.00 186.00

1Z\x x 1Z\v 920N 148.00 186.00

1Z\x x 1Z\x 920N 148.00 186.00

2 x 1Z\v 920N 158.50 187.50

2 x 1Z\x 920N 158.50 187.50

2 x 2 920N 158.50 187.50

2Z\x x 2Z\x 920 158.50 201.50

3 x 2Z\x 920 + +

3 x 3 920 165.50 213.50







Hole cut Products Se

ctI

oN

2

Ho

Le c

Ut

Pr

od

Uc

tS



Run x Branch


5 x 5 x 1Z\x x 1Z\x 920 181.00 230.50

2 x 1Z\x 920 + 230.50

2 x 2 920 181.00 230.50

2Z\x x 1Z\x 920 + +

2Z\x x 2Z\x 920 191.00 244.50

3 x 1Z\x 920 + +

3 x 2 920 + +

3 x 2Z\x 920 + +

3 x 3 920 204.50 263.00

6 x 6 x 1Z\v‡ x 1Z\v‡ 920N + +

1Z\x x 1Z\v‡ 920N + +

1Z\x x 1Z\x 920N + +

2 x 1Z\x 920N 185.50 239.00

2 x 2 920N + +

2Z\x x 2Z\x 920 200.00 258.00

3 x 2Z\x 920 212.50 274.00

3 x 3 920 212.50 274.00

4 x 2Z\x 920 + +

4 x 3 920 + +

4 x 4 920 235.50 307.00

8 x 8 x 2 x 2 920 326.50 412.50

2Z\x x 2 920 + +

2Z\x x 2Z\x 920 326.50 412.50

3 x 2Z\x 920 + +

3 x 3 920 344.00 437.50

4 x 2Z\x 920 + +

4 x 3 920 + +

4 x 4 920 355.50 459.50






67

Hole cut Products


SectIo

N 2

H

oLe

cU

t Pr

od

Uc

tS

Vic-let™ strapless outlet


4 – 8”

10” – UP

vIc-Let StraPLeSS oUtLet – wItH Grade “e” GaSket

Nominal SizeVIC-LET COMPLETE

With “E” or “T” Gasket *

InchesAprx. Wgt. Per Unit

LbsPrice

Per Unit

4 – 8 x Z\x NPT IPS 2.28 $132.50

4 – 8 x C\v NPT IPS 2.28 142.00

10 and larger x Z\x NPT IPS 2.16 132.50

10 and larger x C\v NPT IPS 2.16 142.00

* Available with Grade “T” Gasket. Contact Victaulic for details.

Vic-o-Well™ thermometer outlet


4 – 8”

10” – UP

vIc-o-weLL tHerMoMeter oUtLet – wItH Grade “e” GaSket

Nominal SizeVIC-O-WELL COMPLETE *

With “E” Gasket

Inches

Aprx. Wgt. Per Unit

LbsPrice

Per Unit

4 – 8 for 6 Stem # 3.78 $200.50

10 Flat for 6 Stem # 3.78 200.50


# Vic-O-Well is internally threaded to 1Z\v - 18 NEF 2B.

* Available with Grade “T” Gasket. Contact Victaulic for details.


Hole cut ProductsSe

ctI

oN

2

Ho

Le c

Ut

Pr

od

Uc

tS

valves and Specialties


grooved ips Valves

Vic-300 masterseal® Butterfly Valve

Gear oPerator

10-PoSItIoN HaNdLe wItH MeMory StoP

Ordering InformationProduct, body material and disc/stem are standard as listed below. Please specify size, seat, and operator when ordering. Please see page 71 for numbering chart information.

For power actuation, contact Victaulic for your nearest authorized valve actuation center.


Bare Valves (Ductile Iron Electroless Nickel Coated

Disc)2”

(020)2Z\x”

(024)3”

(030)4”

(040)5”

(050)6”

(060)8”

(080)10”

(100)12”

(120)

V - XXX - 76 - 1 - S - E - 0 $359.00 $469.00 $494.50 $614.50 $1185.50 $1242.00 $1654.50 $2526.50 $2864.50

PRICE OF VALVE COMPLETE WITH OPERATOR

DUCTILE IRON 10-POSITION OPERATOR

“E” or “T” Seat 10-Position Handle with Memory Stop $475.50 $586.00 $611.00 $730.50 $1301.50 $1374.50 $1788.00 $3172.00 $3509.00

10-Position Handle with Memory Stop “O” 680.00 788.00 874.00 975.00 1871.50 1917.50 2464.00 POA POA

10-Position - Tamper Proof with “E” or “T” Seat 547.50 658.00 683.00 802.50 1374.00 1446.50 1859.50 N/A N/A

STAINLESS STEEL TRIM 10-POSITION OPERATOR

“E” or “T” Seat 10-Position Handle with Memory Stop $825.50 $862.00 $929.50 $1116.50 $2249.00 $2404.50 $3563.00 $6427.00 $7377.50

10-Position Handle with Memory Stop “O” 1013.00 1152.50 1509.00 1688.00 3158.00 3381.00 3978.00 POA POA

10-Position - Tamper Proof with “E” or “T” Seat 986.50 1040.00 1061.50 1131.00 2052.00 2227.50 3694.50 N/A N/A

ALUMINUM BRONZE TRIM 10-POSITION OPERATOR

“E” or “T” Seat 10-Position Handle with Memory Stop $691.00 $798.50 $992.50 $1040.00 $1897.00 $2245.50 N/A N/A N/A

10-Position Handle with Memory Stop “O” POA POA POA POA POA POA N/A N/A N/A

10-Position - Tamper Proof with “E” or “T” Seat POA POA POA POA POA POA N/A N/A N/A


N/A - Not available.

POA - Priced on application.


Grooved IPS Pipe valvesSe

ctI

oN

3

Gr

oo

ved

IP

S v

aLv

eS

Bare Valves (Ductile Iron Electroless Nickel Coated

Disc)2”

(020)2Z\x”

(024)3”

(030)4”

(040)5”

(050)6”

(060)8”

(080)10”

(100)12”

(120)

ALUMINUM GEAR OPERATOR WITH DUCTILE IRON DISC

Gear Operator with “E” or “T” Seat $869.50 $979.50 $1004.50 $1124.00 $1695.50 $1752.00 $2165.00 $3101.00 $3439.00

Gear Operator with “O” Seat 919.50 1026.00 1072.00 1213.50 1810.50 2220.50 2941.50 4133.50 4614.00

Gear Operator with Memory Stop “E” or “T” 974.50 1084.50 1109.50 1229.00 1800.50 1883.00 2295.50 3301.50 3639.00

Gear Operator with Chain Wheel “E” or “T” 1256.50 1366.50 1392.00 1511.00 2082.50 2138.50 2551.50 3487.50 3826.00

Gear Operator with Memory Stop & Chain Wheel “E” or “T”

1361.00 1471.50 1496.50 1615.50 2187.50 2269.00 2682.50 3688.00 4026.00

Gear Operator with AWWA 2” Square Operator Nut

POA POA POA POA POA POA POA POA POA

ALUMINUM GEAR OPERATOR WITH STAINLESS STEEL TRIM

Gear Operator with “E” or “T” Seat $1172.00 $1327.00 $1329.00 $1563.00 $2541.50 $2756.00 $3822.50 $6094.00 $6895.00

Gear Operator with “O” Seat 1341.50 1476.00 1543.00 1677.00 2621.00 3478.00 4613.50 6311.50 7256.50

ALUMINUM GEAR OPERATOR WITH ALUMINUM BRONZE TRIM

Gear Operator with “E” or “T” Seat POA POA POA POA POA POA N/A N/A N/A

Gear Operator with “O” Seat POA POA POA POA POA POA N/A N/A N/A

KITS (Kit prices do not include valve)

Spare Handwheel $34.50 $34.50 $34.50 $34.50 $70.50 $70.50 $70.50 $70.50 $70.50

Memory Stop (for Gear Operator) 109.00 109.00 109.00 109.00 135.50 135.50 135.50 207.50 207.50

CONVERSION KITS (Conversion Kit prices do not include valve)

Gear Operator $639.50 $639.50 $639.50 $639.50 $639.50 $639.50 $639.50 $719.50 $719.50

10-Position Handle with Memory Stop 147.50 147.50 147.50 168.00 168.00 168.00 168.00 824.00 824.00

10-Position – Tamper Proof 236.00 236.00 236.00 256.00 256.00 256.00 256.00 N/A N/A




NOTES:* Details required with order

Type Series Body Material Disc/Stem Seat OperatorIn./mmSize

Code

V - - -040 76 1 0ES

V 020024761030040108050133139060159165080100120

76 -Iron/IPS 1 - Ductile Iron S - Ductile Iron/416SSB - Aluminum Bronze/ 416SSV - Thermal BarrierX - CF8M/416SS

9 - Special *

E - EPDMT - Lubricated NitrileO - Fluoro- elastomer

9 - Special*

0 - Bare2 - 10-Position handle with memory stop3 - Gear operator4 - 10-Position with tamper resistant device (8"/200 mm)5 - Gear operator with memory stop6 - Gear operator with chain wheel7 - Gear operator with memory stop and chain wheel8 - Gear operator with AWWA 2" square oper. nut

9 - Special*

2/502½/6576.1 mm3/804/100108.0 mm5/125133.0 mm139.7 mm6/150159.0 mm165.1 mm8/20010/25012/300

71

Grooved IPS Pipe valves


SectIo

N 3

G

ro

oved

IPS

vaLve

S

ags series Vic-300 300 psi


aGS SerIeS vIc-300 BUtterfLy vaLveS

Size

AGS Series Vic-300 Bare Valve ‡

With “E” or “T”

AGS Series Vic-300 With Gear Operator ‡

With “E” or “T”

AGS Series Vic-300

With Gear Operator ‡

With “O”

Actual Inches

Size Code

Aprx. Weight Each Price Each

Aprx. Weight Each Price Each Price Each

Lbs 1182-00 Lbs 1182-20 1132-20

14 140 125.0 $4868.00 156.0 $5724.00 $6523.00

16 160 153.0 6826.50 201.0 7830.50 9292.50

18 180 199.0 8537.00 217.7 9637.50 12010.00

20 200 285.0 11730.00 384.2 13041.00 16251.50

24 240 451.0 15158.00 605.0 16607.00 21975.00

Size Gear Operator Options †

Actual Inches

Size Code

Series Vic-300 With Gear Oper. ‡ And Memory Stop † with “E”

or “T” 1582-21

Series Vic-300 With Gear Oper. ‡ And Chainwheel with “E”

or “T” 1582-22

14 140 $6584.00 $8373.50

16 160 8690.00 10480.00

18 180 10497.00 12287.00

20 200 13901.00 15690.50

24 240 17467.00 19256.50



Galvanized chain @ $8.00 per foot.

‡ 2” nut, in lieu of handwheel, available at no additional charge. Specify clearly on order.

Memory Stop and Chainwheel available. Contact Victaulic for pricing and availability

† Must be ordered at time of purchase. This option is not designed for field installation.



ctI

oN

3

Gr

oo

ved

IP

S v

aLv

eS

series 706 300-psi Butterfly ValvesRequest publication 08.17.

SerIeS 706 300 PSI

SerIeS 706 300-PSI BUtterfLy vaLveS

Size

Aprx. Weight

Each

Series 706 Bare Valve ‡ With “E” or

“T”

Series 706 Bare Valve ‡

With “O”

Aprx. Weight

Each

Series 706 With

Gear Operator ‡ With “E” or “T”

Series 706 With

Gear Operator ‡ With “O”

Actual Inches

Size Code Lbs 3182-00 3132-00 Lbs 3182-20 3132-20

14 140 125.0 $8499.00 $10250.50 152.0 $8962.50 $10542.00

16 160 153.0 11417.00 14182.50 187.0 12957.50 16237.50

18 180 199.0 13755.00 15968.50 257.0 15940.50 17956.50

20 200 285.0 17336.50 20893.00 355.0 19631.50 22998.00

24 240 451.0 24908.50 28296.00 522.0 26273.50 30315.00

Size Gear Operator Options ‡

Actual Inches

Size Code Memory Stop † Chain Wheel

14 140 + $2649.50

16 160 + 2649.50

18 180 + 2649.50

20 200 + 2649.50

24 240 + 2649.50





Memory Stop and Chainwheel available. Contact Victaulic for pricing and availability

Important: Series 706 valves must not be used with AGS products. Series Vic-300 AGS butterfly valves must be used on Advanced Groove System (AGS) piping systems.

† Must be ordered at time of purchase. This option is not designed for field installation.

V - - -180 1 5 20

PressureRating Body

Closure CouplingGasket Grade Bracket Accessories*

*Details required

Act.In./mm

SizeCode

28

Type

00 - Bare20 - Gear operator21 - Gear operator with memory stop22 - Gear operator with chain wheel23 - Gear operator with AWWA square operating nut24 - Gear operator with memory stop and chain wheel29 - Non-std. gear operator*

9 - Special*

0 - No Bracket2 - Standard

9 - Special*

5 - PPS Coated Iron

9 - Special*

3 - 300 psi (3)140160180200240

14/35016/40018/45020/50024/600

V 3 - Iron disc w/fluoroelastomer Seat/ Stainless Steel stems - "O"7 - Iron disc w/Nitrile Seat/Stainless Steel stems - “T"8 - Iron disc w/EPDM Seat/Stainless Steel stems - "E"

9 - Special*

See AGS Series Vic-300 and Series 706 Butterfly Valve Figure Numbering Chart on previous page.

73



SectIo

N 3

G

ro

oved

IPS

vaLve

S

series 700Request publication 08.05.

SerIeS 700 – 200 PSI

Nominal Size Valve with Two Position Padlockable Handle

Inches

Aprx. Wgt. Each Lbs

Standard Trim Price Each

Stainless Steel Trim Price Each

1Z\x 2.8 $417.00 $528.50

2 3.3 417.00 528.50

2Z\x 6.4 529.50 642.00

3 6.8 598.50 710.50

4 12.1 658.00 771.50

5 26.1 1255.00 –

6 32.5 1328.00 1440.50


Series 700 valves furnished with rubber lined painted steel body, painted ductile housing and aluminum-bronze disc. Grade “T” Nitrile and Grade “E” EPDM liners are available. Refer to Valve Figure Number Chart below.

V - 020 - 2 - 1OA A A

TypeNom.

In./mmSize

CodePressure

Rating Seat/Liner Disc & Trim Body Style Operator

V 014020024030040050060

1½/402/502½/653/804/1005/1256/150

2 - 200 psi A - Grade “E” (EPDM) rubber-lined steelB - Grade “T” (Nitrile) rubber-lined steel

9 - Special*

A - Al-BronzeB - Stainless steelC - Chrome plated Al-Bronze

A - Standard 10 - Two Position Lever Handle

NOTE: * Details required

grooved end Ball Valves

SerIeS 721Request publication 08.14.

SerIeS 721 Grooved eNd BaLL vaLve

Nominal Size Inches

Aprx. Weight Each

Lbs

Valve Complete With 2-Position Handle

Price Each

4 32.4 $1603.00

6 75.0 4920.00

Act.In./mm

SizeCode

PressureRating Body Ball & Stem Seat Operator

B 040060

4/1006/150

8 - 800 psi/ 5515 kPa

1 - Iron 6 - Carbon steel, chrome plate

6 - Reinforced TFE 15 - 2 Position handleType

B - 040 - 8 6 6 6 - 15



ctI

oN

3

Gr

oo

ved

IP

S v

aLv

eS



1Z\x– 3”

4 – 6”

SerIeS 726 – carBoN SteeL or StaINLeSS SteeL trIM

Nominal Size Inches

Aprx. Weight Each

Lbs

Valve Complete With Handle &

Tamper Resistant Lock/Seal Option

Valve * Complete With Gear Operator

WITH CARBON STEEL CHROME PLATED TRIM

1000 psi 1166-15 1166-20

1Z\x 4.4 $264.50 $704.50

2 6.5 293.50 988.00

2Z\x 10.4 641.00 1297.00

3 14.9 1036.00 1837.00

800 psi 8166-15 8166-20

4 41.5 1603.00 2341.00

6 78.5 4920.00 5523.00

WITH STAINLESS STEEL TRIM

1000 psi 1126-15 1126-20

1Z\x 4.8 279.50 722.00

2 7.5 453.50 1454.50

2Z\x 11.6 1146.00 1832.50

3 17.2 1474.50 2338.50

800 psi 8126-15 8126-20

4 45.0 2008.00 2842.00

6 82.0 5406.50 6296.00


Series 726 valves are available with electric, pneumatic, and hydraulic actuators or chain wheels. Contact authorized valve auto-mation centers (VAC) per the Vic-300 MasterSeal Instruction Manual (I-VIC300MS).* Valve with gear operator requires additional lead time. Contact Victaulic for details. When ordered separately, handles and locking device kits are non-cancellable and non-returnable.

B - 020 - 1 1 6 6 - 15

TypeAct.

In./mmSize

CodePressure

Rating Body Ball & Stem Seat Operator

B 014020024030040060

1½/402/502½/653/804/1006/150

1 - 1,000 psi8 - 800 psi³

1 - Iron²

9 - Special¹

2 - 316 Stainless Steel6 - Chrome Plated Carbon Steel

9 - Special¹

6 - Reinforced PTFE

9 - Special¹

00 - Bare15 - 2-Position Handle16 - 2-Position Handle with Tamper- proof Locking Device19 - Locking Device - Without Handle20 - Gear Operator21 - Gear Operator with Memory22 - Gear Operator with Chain Wheel23 - Gear Operator with AWWA Square Nut29 - Non-standard Gear Operator¹

NOTES:(1) Details required.(2) All Iron Body valves are NACE compliant.(3) Pressure rating applicable to 4 and 6" sizes only.* For Stainless Steel Series 726S, please see publication 17.22.

75



SectIo

N 3

G

ro

oved

IPS

vaLve

S

Ball Valves

SerIeS 722

(Threaded) 600 psi (WOG)Request publication 08.15.

SerIeS 722 – BaLL vaLveS

Nominal Size Inches Price Each

Aprx. Wgt. Each Lbs

Z\v $36.00 400

Z\x 50.50 1600

C\v 50.50 1400

1 68.00 1500

1Z\v 108.00 1500

1Z\x 133.50 1260

2 178.50 1100


UL Listed, FM Approved in Z\x” and larger sizes.

check Valve 300 psi


SerIeS 712 – Grade “e” or “t” or Grade “o” wItH dUctILe IroN Body

Size Inches

Aprx. Wgt. Ea.

Lbs

Grade “E” or “T”

Price Each

Grade “O” Fluroelastomer

Price Each

2 11.6 $341.00 $769.50

2Z\x 18.0 562.00 825.00

3 23.0 653.50 876.00

4 38.0 929.50 1178.00


SerIeS 712 dISc kIt

Size Disc Kit

Inches Grade “E” or “T” Grade “O”

2 $161.50 $352.00

2Z\x 256.50 387.00

3 298.50 405.00

4 424.00 571.00


high pressure check Valve 1000 psi


SerIeS 713 – Grade “e” or “t” wItH dUctILe IroN Body

Size Inches

Aprx. Weight Each

LbsGrade “E” or “T”

Price Each

2 12.0 $933.00




ctI

oN

3

Gr

oo

ved

IP

S v

aLv

eS

Vic-check®

check Valves

SerIeS 716H/716Request publication 08.08.

SerIeS 716H 2– 3”

SerIeS 716 4 – 12”

SerIeS 716H/716 – vIc-cHeck cHeck vaLveS

Nominal Size Inches

Aprx. Weight Each

Lbs“E” or “T” Price Each

“O” Price Each

2 10.7 $425.00 $602.50

2Z\x 3.6 443.00 620.00

3 4.5 523.50 661.50

4 16.0 553.50 929.50

5 20.0 920.00 1333.50

6 28.0 1090.50 1511.00

8 40.0 1490.50 1783.00

10 100.0 4309.50 5669.50

12 140.0 5107.00 6809.00



For Series 716 sizes 4 –12” only – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery.Valves come standard untapped – optional two Z\x” NPT drain holes. One hole on each side of seat also available as an option.

77



SectIo

N 3

G

ro

oved

IPS

vaLve

S

Venturi check Valve


SerIeS 779 – veNtUrI cHeck vaLve

Nominal Size Inches

Aprx. Weight Each

LbsValve * Complete

Price Each

Flow Measuring Kit ONLY

Price Each

4 16.0 $820.50 $306.50

5 20.0 1187.50 306.50

6 28.0 1358.50 306.50

8 40.0 1758.50 306.50

10 100.0 4577.50 306.50

12 140.0 5374.50 306.50


* Valve complete includes Venturi Check valve, drilled, tapped and plugged with Flow Measuring Kit enclosed (field assembly required). Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnect for meter connection and flow chart tag to affix to the valve. NOTE: Valve comes with two Z\,” NPT drain holes and plug, one hole on each side of valve.

C - 040 - 1 4 1 0 - 02

TypeAct.

In./mmSize

CodeBody

Material Disc Seat Agency Accessories

C 024076030040050139060165080100120

2½/657

76.1 mm3/807

4/1005/125139.7 mm6/150165.1 mm8/20010/25012/300

1 - D.I.3 - Coated D.I.*

9 - Special*

1 - All-Bronze with EPDM¹2 - All-Bronze with Nitrile1

3 - All-Bronze with Viton1

4 - D.I. with EPDM Encapsulation3

5 - D.I. with Nitrile Encapsulation3

6 - D.I. with Fluoroelastomer Encapsulation3

9 - Special*

1 - Nickel **2 - PPS coated D.I.1

0 - None 00 - None02 - Flow Measuring Kit (Series 779)4,5

05 - ½" Taps with Plugs for Drains5,6

06 - 2" Drain Tap with ¼" Taps on Bottom of Valve25 - Flow Measuring Kit with Drains

NOTES:* Details must be provided with order1 - 2½"/65 mm, 76.1 mm and 3"/80 mm sizes only3 - Sizes 4 – 8"/100 – 200 mm only4 - This code is for Series 779 valves only (Example: C-060-1410-02)5 - Sizes 4 – 12"/100 – 300 mm only6 - Includes two ½" taps on bottom of valve – one each upstream and downstream of disc7 - Size Limitations: 76.1 mm and 3"/80 mm sizes are not available in Series 779 configurations** - 4"/100 mm and larger are always nickel

dual disc Vic-check® Valves

aGS SerIeS w715Request publication 20.08.

aGS SerIeS w715 – vIc-cHeck cHeck vaLveS

Nominal Size Inches

Aprx. Weight Each

LbsGrade “E” Price Each

14 140.0 $5722.50

16 160.0 7800.00

18 180.0 10296.50

20 200.0 13534.50

24 240.0 17065.50



ctI

oN

3

Gr

oo

ved

IP

S v

aLv

eS

master meter


StyLe 739 – MaSter Meter

Model Number

Dial Size Inches Price Each

S4 4Z\x $4963.00

L6 6 +



Balancing plug Valve

SerIeS 377

(AWWA Dimensions) Use with Style 307 Transition coupling for IPS pipe.Request publication 08.12.

SerIeS 377 – BaLaNcING PLUG vaLve

Nominal SizeWith Lever Operator With Gear Operator

Inches

Aprx. Wgt. Each

Lbs Price Each

Aprx. Wgt. Each

Lbs Price Each

3 47.0 $1100.00 39.0 $2085.00

4 54.0 1352.50 46.0 2163.00

6 89.0 2075.00 90.0 2915.00

8 (100 – 175 psi) – – 140.0 4489.50

10 – – 218.0 6109.00

12 – – 308.0 9316.50


Available standard with EPDM (Grade “E”) or Nitrile (Grade “T”). Specify choice on order. Coated plug, welded nickel seat and lever or gear operator complete with memory stop.

P 2 1 1 1- 080 - 81-

TypePressure

Rating Body Material Plug Coating Seat Operator

P 030040060080100120

3/804/1006/1508/20010/25012/300

2 - 175 psi

9 - Special (1)

1 - Iron

9 - Special (1)

1 - Nitrile - “T”2 - EPDM - “E”3- Fluoroelastomer - “O”

9 - Special (1)

1 - Nickel

9 - Special (1)

00 - Bare11 - Std. Handle with memory stop (3)81 - Gear operator with memory stop82 - Gear operator with memory stop and chainwheel89 - Special gear operator (2)

Nom.In./mm

SizeCode

(1) Details must be supplied with order.(2) Details of operator must be supplied with order.(3) 3, 4, and 6"/80, 100 and 150 mm only.

79



SectIo

N 3

G

ro

oved

IPS

vaLve

S

sump ejector kit


Size Inches

Wgt. Assembled Price Each

3 91.4 $2659.50

4 128.8 3030.00

6 221.4 4252.50

SerIeS 318 - SUMP ejector kIt coNSIStS of tHe foLLowING coMPoNeNtS:

Quantity Component

1 Series 365 Vic-Plug Valve

1 Series 317 AWWA Check Valve †

2 Style 307 Transition Coupling

1 Style 31 AWWA Coupling

* Kits are supplied unassembled.† Arm and Spring Kit standard.



ctI

oN

3

Gr

oo

ved

IP

S v

aLv

eS

suction diffuser

SerIeS 731-dRequest publication 09.20.

SerIeS 731-d – SUctIoN dIffUSer

Grvd. End Inlet x Vic-Flange

Adapter Outlet Nominal Size

Inches

Aprx. Wgt Each

Lbs

Centerline of Inlet Pipe to Flange Face

Inches Price Each

3 x 2 20.1 6.30 $2128.50

2Z\x 26.0 6.30 1530.00

3 27.7 6.30 1551.00

4 x 2Z\x 29.7 7.40 1681.50

3 31.6 7.40 1813.50

4 34.6 7.40 2100.50

5 x 2Z\x 46.2 8.40 2520.50

3 46.2 8.40 2941.00

4 49.4 8.40 2341.50

5 52.3 8.40 2460.00

6 x 4 64.0 9.00 2496.50

5 67.3 9.00 2985.50

6 70.3 9.00 3100.50

8 x 5 98.5 10.20 3180.50

6 102.1 10.20 3353.50

8 110.7 10.20 5770.50

10 x 6 150.6 12.40 5991.00

8 159.9 12.40 6511.00

10 172.0 12.40 7845.50

12 x 8 245.4 15.43 8215.00

10 260.3 15.43 9286.50

12 273.2 15.43 12916.00


Start up baskets are available – for pricing contact Victaulic.

suction diffuser

aGS SerIeS w731-IRequest publication 20.13.

aGS SerIeS w731-I – SUctIoN dIffUSer

Grvd. End Inlet x Vic-Flange Adapter

Outlet Nominal Size

Inches

Aprx. Weight Each

Lbs Price Each

14 x 10 410.0 $11126.00

12 434.0 12428.50

14 711.0 15092.50

16 x 12 583.0 16500.50

14 551.0 15533.50

18 x 16 678.0 23763.00

24 x 20 1102.0 49965.50


Start up baskets are available – for pricing contact Victaulic.

81

Grooved IPS Pipe accessories


SectIo

N 3

G

ro

oved

IPS

PIPe

acce

SS

or

IeS

tee-type strainer


StyLe 730 – tee tyPe StraINer

Nominal SizeAprx.

Weight Each Price EachStandard

Basket OnlyFine Mesh

Basket Only †

Inches Lbs Standard * Galvanized Price Each Price Each

1Z\x 7.0 $816.00 $905.00 + +

2 8.0 1044.00 1224.50 $718.00 +

2Z\x 9.0 1097.00 1293.00 749.00 +

3 21.0 1231.50 1474.50 780.50 +

4 20.5 1394.00 1708.50 677.00 +

5 31.0 2019.00 2418.00 723.00 +

6 44.0 2191.00 2672.00 737.00 +

8 90.6 3358.50 4124.00 814.50 +

10 136.0 4931.50 6088.00 1925.50 +

12 197.0 6349.00 7818.00 2309.50 +



* Vic-Strainer Series 730 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.Series 730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.

† Contact Victaulic for application and pricing information. 12 mesh screens standard for 1Z\x– 3”; 6 mesh for 4 – 16”, and 4 mesh for 18 – 30”.

NOTE: Series 730 Vic-Strainers in sizes 14 – 24” have a standard groove for retrofit only and must not be used with Advanced Groove System (AGS) products. Contact Victaulic for pricing and availability.

tee-type strainer

aGS SerIeS w730Request publication 20.11.

aGS SerIeS w730 – tee-tyPe StraINer

Nominal Size Inches

Aprx. Weight Each

LbsPrice Each Standard *

Standard Basket Only

Price Each

Fine Mesh † Basket Only

Price Each

14 300.0 $20366.50 + +

16 350.0 25312.50 + +

18 400.0 33292.50 + +

20 565.0 42903.50 + +

24 830.0 52636.00 + +



* Vic-Strainer Series W730 AGS standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.Series W730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.

† Contact Victaulic for application and pricing information. 6 mesh screens standard for 14 – 16”, and 4 mesh for 18 – 24”.


Grooved IPS Pipe accessoriesSe

ctI

oN

3

Gr

oo

ved

IP

S P

IPe

ac

ce

SS

or

IeS

grooved end Vic-strainer®

wye StraINer SerIeS 732Request publication 09.03.

SerIeS 732 – Grooved eNd vIc-StraINer

Nominal SizeAprx.

Weight Each Price EachStandard

Basket OnlyFine Perforated

Basket Only

Inches Lbs Standard * Galvanized Price Each Price Each †

2 10.0 $1057.00 $1182.00 $764.50 +

2Z\x 14.0 1110.50 1258.00 797.50 +

3 20.0 1247.50 1434.50 692.50 +

4 32.0 1411.50 1669.50 721.00 +

5 50.0 2044.00 2435.50 770.00 +

6 72.0 2218.50 2730.50 785.00 +

8 125.0 3400.50 4257.00 863.50 +

10 205.0 5466.00 6861.50 2050.50 +

12 280.0 9547.00 11603.00 2459.50 +



† Contact Victaulic for application and pricing information. Standard stainless metal baskets are offered for the following sizes: 0.062” diameter holes for 2 – 3” sizes; 0.125” diameter holes for 4 – 12” sizes.

* Vic-Strainer Series 732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM or Nitrile Grade “T” gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.Series 732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.

Wye type Vic-strainer®

SerIeS w732Request publication 20.19.

SerIeS w732 – wye tyPe vIc-StraINer

Nominal SizeAprx.

Weight Each Price Each

Inches Lbs Standard *Standard

Basket OnlyFine Perforated

Basket Only †

14 425.0 $21556.50 $6965.50 +

16 600.0 26791.50 8658.00 +

18 800.0 33726.50 11283.50 +



* Vic-Strainer Series W732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gas-ket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.Series W732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.† Contact Victaulic for application and pricing information. Standard stainless steel baskets are offered for the following sizes: 0.156”/4 mm diameter for holes 14 – 18”/350 – 450 mm sizes.

mover®

expansion Joint


StyLe 150 – Mover eX�PaNSIoN joINt

SizeAprx.

Weight Each

Maximum Available

Expansion

Grooved and Plain End “E” or “T” Price Each

Inches Lbs Inches Painted Galv.

2 15.9 3 $1304.50 $1536.00

3 25.6 3 1499.00 1765.50

4 39.6 3 1975.00 2326.00

5 55.0 3 2511.00 3010.00

6 75.0 3 3070.00 3616.00

Victaulic Style 150 Expansion Joints are supplied fully assembled, with a Grade “E” gasket for water services up to +230°F. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout® Style 99 couplings, or with grooved ends for installation using Victaulic Coupling Style 77, 75, HP-70 or 07 Zero-Flex® couplings.NOTE: Style 155 Expansion Joints in sizes C\v– 24” are available. Style 155 Expansion Joints are non-cancellable and non-return-able. Contact Victaulic for details.


83

Grooved IPS Pipe accessories


SectIo

N 3

G

ro

oved

IPS

PIPe

acce

SS

or

IeS


circuit Balancing Products


circuit Balancing Valves

ta series 786

SoLder eNd (300 PSI)Request publication 08.16.

ta SerIeS 786 – StaS

Nominal Size Inches

Victaulic Part Code

Tour & Andersson Code List Price

Z\x V-004-786-CBV 52-167-914 $62.50

C\v V-006-786-CBV 52-167-920 66.00

1 V-010-786-CBV 52-167-925 89.00

1Z\v V-012-786-CBV 52-167-932 138.00

1Z\x V-014-786-CBV 52-167-940 159.50

2 V-020-786-CBV 52-167-950 238.50

ta series 787

NPt (feM.) eNd (300 PSI)Request publication 08.16.

ta SerIeS 787 – Stad

Nominal Size Inches

Victaulic Part Code


Z\x V-004-787-CBV 52-167-514 $60.50

C\v V-006-787-CBV 52-167-520 66.50

1 V-010-787-CBV 52-167-525 90.50

1Z\v V-012-787-CBV 52-167-532 139.50

1Z\x * V-014-787-CBV 52-167-540 161.50

2 * V-020-787-CBV 52-167-550 241.00

* Available with fluoroelastomer gasket, contact Victaulic for pricing and availability.

series 78k

fPt eNd X� MPt UNIoN (300 PSI)Request publication 08.16.

SerIeS 78k – Stadk BaLaNcING vaLve wItH UNIoN coNNectIoN

FPT Valve Size Inches

MPT Union Size Inches Victaulic Part Code Price Each

Z\x Z\x V-004-78K-CBV $110.50

C\v Z\x V-X87-78K-CBV 120.00

C\v C\v V-006-78K-CBV 120.00

1 C\v V-A61-78K-CBV 152.00

1 1 V-010-78K-CBV 152.00

1Z\v 1 V-Z90-78K-CBV 198.00

1Z\v 1Z\v V-012-78K-CBV 271.50

1Z\x 1Z\v V-Z91-78K-CBV 271.50

1Z\x 1Z\x V-014-78K-CBV 271.00

2 1Z\x V-J86-78K-CBV 340.50

2 2 V-020-78K-CBV 340.50


circuit Balancing ProductsSe

ctI

oN

4

cIr

cUIt

Ba

LaN

cIN

G P

ro

dU

ctS

ta series 788

fLaNGed eNd (250 PSI)

Class 1350 designRequest publication 08.16.

ta SerIeS 788 – Staf

Nominal Size Inches

Victaulic Part Code


2Z\x V-024-788-CBV 52-167-965 $603.00

3 V-030-788-CBV 52-167-980 921.50

4 V-040-788-CBV 52-167-990 1270.50

5 V-050-788-CBV 52-167-991 2273.50

6 V-060-788-CBV 52-167-992 2907.00

8 V-080-788-CBV 52-167-993 6282.50

10 V-100-788-CBV 52-167-994 8161.00

12 V-120-788-CBV 52-167-995 17087.50

14 V-140-788-CBV 52-182-996 18543.50

16 V-160-788-CBV 52-182-997 20294.00


ta series 789

Grooved eNd (350 PSI)Request publication 08.16.

ta SerIeS 789 – StaG

Nominal Size Inches

Victaulic Part Code


2Z\x * V-024-789-CBV 52-167-073 $521.00

3 * V-030-789-CBV 52-167-089 811.00

4 * V-040-789-CBV 52-167-114 1121.50

5 V-050-789-CBV 52-167-141 2030.00

6 * V-060-789-CBV 52-167-168 2719.50

8 * V-080-789-CBV 52-167-219 5795.00

10 * V-100-789-CBV 52-167-273 7603.50

12 * V-120-789-CBV 52-167-324 16523.50


* Available with fluoroelastomer gasket, contact Victaulic for pricing and availability.

ta series 786 and 787

INSULatIoN kItSRequest publication 08.16.

ta SerIeS 786 aNd 787 – INSULatIoN kItS

Nominal Size Inches

Victaulic Part Code List Price

Z\x and C\v K-004-784-INS $17.50

1 K-010-784-INS 19.50

1Z\v K-012-784-INS 21.50

1Z\x K-014-784-INS 24.00

2 K-020-784-INS 29.00


87



SectIo

N 4

cIr

cUIt B

aLa

NcIN

G P

ro

dU

ctS

ta series 788 and 789


ta SerIeS 788 aNd 789 – INSULatIoN kItS

Nominal Size Inches

Victaulic Part Code


2Z\x K-024-784-INS 52-189-865 $339.00

3 K-030-784-INS 52-189-880 376.50

4 K-040-784-INS 52-189-890 419.50

5 K-050-784-INS 52-189-891 468.50

6 K-060-784-INS 52-189-892 578.50


kit 786 *

draIN kItRequest publication 08.16.

ta SerIeS 786 draIN kIt

Victaulic Part Code


K-000-786-CBV 52-167-997 $19.00


* For use with TA Series 786 and 787 valves only.

spare partsRequest publication 08.16.

Z\x– 2 rePLaceMeNt ProBe Port

2Z\x– 12 rePLaceMeNt ProBe Port

eX�teNded ProBe Port

0

0

STAD 2 ½

PLaStIc HaNdwHeeL aLUMINUM

HaNdwHeeL

SPare PartS

Nominal Size Inches

Victaulic Part Code


Replacement Probe Port Set

Z\x– 2 K-000-740-003 52-179-810 $59.00

2Z\x– 12 K-000-740-002 52-179-811 66.00

Extended (2C\,)” Port Set

2Z\x– 12 K-000-740-001 52-179-812 90.00

Handwheel - Plastic

Z\x– 2 P-004-784-001 52-186-009 27.00

2Z\x– 6 P-024-784-001 52-186-098 89.00

Handwheel - Aluminum

8 – 12 P-080-784-001 52-186-098 623.50

Measuring Probes

Z\x– 12 P-000-738-100 307-635-62 142.00




ctI

oN

4

cIr

cUIt

Ba

LaN

cIN

G P

ro

dU

ctS

differential pressure controllers

ta series 793

dIffereNtIaL PreSSUre coNtroLLer – tHreaded eNdRequest publication 08.29.

ta SerIeS 793 dIffereNtIaL PreSSUre coNtroLLer

SizeApprox. Wgt. Ea. Series 793 (Threaded)

Nominal Size Inches

Actual Outside Diameter

Inches Lbs.

Differential Pressure Range

psiVictaulic Part

NumberTour &

Andersson Code Price Each

Z\x 0.840 2.4 1.45 – 8.70 V-004-793-CBV 52 266-015 $313.00

C\v 1.050 2.6 1.45 – 8.70 V-006-793-CBV 52 266-020 317.50

1 1.315 2.9 1.45 – 8.70 V-010-793-CBV 52 266-025 322.00

1Z\v 1.660 5.7 2.90 – 11.6 V-012-793-CBV 52 266-032 418.00

1Z\x 1.900 6.4 2.90 – 11.6 V-014-793-CBV 52 266-040 483.00

2 2.375 7.7 2.90 – 11.6 V-020-793-CBV 52 266-050 575.00

ta series 794

dIffereNtIaL PreSSUre coNtroLLer – fLaNGed eNd (cLaSS 150, aSMe/aNSI B16.42)Request publication 08.29.

ta SerIeS 794 dIffereNtIaL PreSSUre coNtroLLer – (2.9 – 11.6 PSI) dIffereNtIaL PreSSUre raNGe

SizeApprox. Wgt. Ea. Series 794 (Flanged)

Nominal Size Inches


Inches Lbs.


psiVictaulic Part

NumberTour &


2Z\x 2.875 46.3 2.9 – 11.6 V-024-794-116 52 266-065 $2326.00

3 3.500 52.9 2.9 – 11.6 V-030-794-116 52 266-080 2454.00

4 4.500 72.8 2.9 – 11.6 V-040-794-116 52 266-090 3293.00

ta SerIeS 794 dIffereNtIaL PreSSUre coNtroLLer – (5.8 – 23.2) PSI dIffereNtIaL PreSSUre raNGe

SizeApprox. Wgt. Ea. Series 794 (Flanged)

Nominal Size Inches


Inches Lbs.


psiVictaulic Part

NumberTour &


2Z\x 2.875 46.3 5.8 – 23.2 V-024-794-223 52-266-165 $2505.50

3 3.500 52.9 5.8 – 23.2 V-030-794-223 52-266-180 2683.50

4 4.500 72.8 5.8 – 23.2 V-040-794-223 52-266-190 3597.00

ta series 793


ta SerIeS 793 – INSULatIoN kItS

Size Series 793 Insulation Kit

Nominal Size Inches Victaulic Part Number Tour & Andersson Code Price Each

Z\x– 1 P-006-793-INS 52 265-225 $79.00

1Z\v– 2 P-012-793-INS 52 265-250 93.00


89



SectIo

N 4

cIr

cUIt B

aLa

NcIN

G P

ro

dU

ctS

accessoriesRequest publication 08.29.

caPILLary tUBe caPILLary eX�teNSIoN kIt

SettING tooL

ta SerIeS 793 PLaStIc Z\x– 1”

ta SerIeS 794 PLaStIc 1Z\v– 2”

ta dIffereNtIaL PreSSUre coNtroLLer acceSSorIeS

Nominal Size Inches Description

Victaulic Part Code


Capillary Pipe and Extension Kit

– Capillary Tube P-000-793-001 N/A $456.00

– Capillary Extension Kit K-002-793-000 N/A 72.50

Setting Tool

3 TA Series 793 P-004-793-KEY 52-265-305 535.00

5 TA Series 794 P-030-794-KEY 52-265-304 535.00

Handwheels

Z\x– 1 TA Series 793 P-004-793-HDW N/A 143.00

1Z\v– 2 TA Series 794 P-012-793-HDW N/A 143.00



ctI

oN

4

cIr

cUIt

Ba

LaN

cIN

G P

ro

dU

ctS

coil components

series 78y strainer/Ball Valve combination

(400 PSI)Request publication 08.30.

SerIeS 78y StraINer/BaLL vaLve coMBINatIoN

Nominal Size

78Y Strainer/Ball Valve Combination

Inches Inlet Outlet Victaulic Part Code Price Each

Z\x Female Female Union V-004-78Y-BFF $89.00

Z\x Sweat Sweat V-004-78Y-BSS 89.00

C\v Female Female Union V-006-78Y-BFF 92.50

C\v Sweat Sweat V-006-78Y-BSS 92.50

C\v x Z\x Female Female Union V-X87-78Y-BFF 92.50

1 Female Female Union V-010-78Y-BFF 147.00

1 Sweat Sweat V-010-78Y-BSS 147.00

1 x C\v Female Female Union V-A83-78Y-BFF 147.00

1Z\v Female Female Union V-012-78Y-BFF 169.50

1Z\v Sweat Sweat V-012-78Y-BSS 169.50

1Z\v x 1 Female Female Union V-B05-78Y-BFF 169.50

1Z\x Female Female Union V-014-78Y-BFF 264.00

1Z\x Sweat Sweat V-014-78Y-BSS 264.00

2 Female Female Union V-020-78Y-BFF 311.50

2 Sweat Sweat V-020-78Y-BSS 311.50

series 78u union port fitting

(400 PSI)Request publication 08.30.

SerIeS 78U UNIoN Port fIttING

Nominal Size

78U Union Port Fitting

Inches Inlet Outlet Victaulic Part Code Price Each

Z\x Female Male Union V-004-78U-UFM $28.00

Z\x Sweat Male Union V-004-78U-USM 28.00

C\v x Z\x Female Male Union V-A59-78U-FMR 31.50

C\v x Z\x Sweat Male Union V-A59-78U-SMR 31.50

C\v Female Male Union V-006-78U-UFM 31.50

C\v Sweat Male Union V-006-78U-USM 31.50

1 x C\v Female Male Union V-A83-78U-FMR 45.00

1 x C\v Sweat Male Union V-A83-78U-SMR 45.00

1 Female Male Union V-010-78U-UFM 45.00

1 Sweat Male Union V-010-78U-USM 45.00

1Z\v x 1 Female Male Union V-B05-78U-FMR 64.00

1Z\v x 1 Sweat Male Union V-B05-78U-USM 64.00

1Z\v Female Male Union V-012-78U-UFM 64.00

1Z\v Sweat Male Union V-012-78U-USM 64.00

1Z\x x 1Z\v Female Male Union V-B31-78U-FMR 71.50

1Z\x x 1Z\v Sweat Male Union V-B31-78U-USM 71.50

1Z\x Female Male Union V-014-78U-UFM 71.50

1Z\x Sweat Male Union V-014-78U-USM 71.50

2 x 1Z\x Female Male Union V-B67-78U-FMR 114.50

2 x 1Z\x Sweat Male Union V-B67-78U-USM 114.50

2 Female Male Union V-020-78U-UFM 114.50

2 Sweat Male Union V-020-78U-USM 114.50

91



SectIo

N 4

cIr

cUIt B

aLa

NcIN

G P

ro

dU

ctS

accessoriesRequest publication 08.30.

coIL coMPoNeNt acceSSorIeS

Nominal Size Inches

Victaulic Part Code List Price

Port Extender for Series 78Y and 78U

Z\x– 2 P-000-78P-EXT $12.00

Air Vent for Series 78Y and 78U

Z\x– 2 P004-78P-0AV 12.00

Pressure Temperature Port for Series 78Y and 78U

Z\x– 2 P004-78P-0TP 14.50

Hose End Drain Valve for Series 78Y

Z\x– 2 P004-78P-0HN 19.50

Insulation Extension for Series 78Y Handle

Z\x– C\v P004-78P-HDL 21.50

1 – 1Z\v P010-78P-HDL 28.50

1Z\x– 2 P014-78P-HDL 34.00




ctI

oN

4

cIr

cUIt

Ba

LaN

cIN

G P

ro

dU

ctS

Balancing instruments

series 736

ta LINk dIffereNtIaL PreSSUre SeNSorRequest publication 08.16

SerIeS 736 – ta LINk dIffereNtIaL PreSSUre SeNSor

Range psi

Victaulic Part Code


0 – 6 V-000-736-000 52-010-004 $3187.50

0 – 15 V-000-736-001 52-010-010 3187.50


universal gauge meter conversion kit

toUr & aNderSSoN UNIverSaL GaUGe Meter coNverSIoN kIt †

Victaulic Part Code


K-000-738-100 – $425.00


The Series 738 D.G.M. reads differential pressure in inches of water. The gauge is calibrated from 0 – 135 in. of H2O. The meter

comes with a conversion kit.† The kit includes 2 probes, necessary fittings, flow wheel and instruction sheet.

ta series 73m

ta cMIRequest publication 08.16.

TA CMI is a computer programmed measuring instrument. It is a hand-held instrument for measuring differential pressure, temperature and flow through balancing valves in hydronic systems. It consists of a sensor unit and an instrument unit that has been programmed with TA valve characteristics, which makes it possible to take a direct reading of flow differential pressures.ta SerIeS 73M – ta cMI

Victaulic Part Code


V-000-73M-000 52-198-550 $5685.50


93



SectIo

N 4

cIr

cUIt B

aLa

NcIN

G P

ro

dU

ctS


Plain end couplings and fittings


products for plain end ips steel pipe

roust-a-Bout® coupling



PIPE Inches

Aprx. Wgt. Ea.

COUPLING COMPLETE † With Grade “E” or “T” Gasket

Plated Bolt & Nut

Nominal Size

Outside Diameter Lbs.

Price EachSize

InchesPainted Galv.

1 1.315 1.7 $121.50 $157.50 C\, x 2

1Z\x 1.900 3.6 121.50 157.50 Z\x x 2Z\x

2 2.375 5.3 121.50 157.50 B\, x 3Z\v

2Z\x 2.875 5.7 121.50 157.50 B\, x 3Z\v

3 3.500 8.7 178.00 233.50 C\v x 4Z\v

3Z\x 4.000 10.6 206.50 273.50 C\v x 4Z\v

4 4.500 12.8 206.50 274.00 C\v x 4Z\v

5 5.563 17.3 294.00 390.50 M\, x 5

6 6.625 23.2 358.50 487.00 1 x 6

8 8.625 37.2 633.00 847.00 M\, x 5

10 10.750 48.2 822.50 1104.00 M\, x 5

12 12.750 60.0 1032.00 1423.50 1 x 6Z\x

14 14.000 89.0 1465.50 1902.00 1 x 6Z\x

16 16.000 105.0 2005.00 2559.50 1 x 6Z\x

18 18.000 122.4 2675.50 3472.50 1 x 6Z\x



gaskets for style 99 couplings

Nominal Size Standard Gaskets

InchesStandard Grade

“E” or “T”Grade “L” Silicone

Grade “A” White Nitrile

Grade “O” Fluoroelastomer

1 * $22.50 $81.50 $73.50 –

1Z\x * 25.50 123.00 95.00 $277.00

2 32.00 170.00 219.50 324.00

2Z\x 34.00 200.50 221.00 629.00

3 37.50 273.00 701.00 486.50

3Z\x 54.00 + + +

4 54.00 417.00 931.50 512.00

5 64.50 609.00 982.50 1099.50

6 78.50 822.50 1010.50 1517.00

8 102.50 793.00 + 2100.00

10 131.50 1230.00 + +

12 160.50 1287.00 + +

14 252.00 – – –

16 299.00 – – –



* Style 77 gasket.


Products for Plain end IPS Steel PipeSe

ctI

oN

5

Pr

od

Uc

tS f

or

PLa

IN e

Nd

IP

S S

teeL

PIP

e

plated trackhead Bolts and nuts

PLated trackHead BoLtS aNd NUtS


C\, x 2 $11.00

Z\x x 2Z\x 11.50

2C\v 11.50

3 11.50

3Z\v 11.50

B\, x 2C\v 14.00

3Z\v 14.00

3Z\x 15.00

4 19.00

5 23.50


C\v x 4Z\v $16.00

5 22.00

M\, x 5 29.50

5Z\x 34.00

6Z\x 37.50

1 x 3Z\x 32.50

5 30.00

5Z\x 37.50

6 37.50

6Z\x 39.50


adapter nipplesRequest publication 14.04

No. 40-P

No. 42-P

No. 43-P

adaPter NIPPLeS – PLaIN to tHreaded, PLaIN to BeveLed, or PLaIN to Grooved

PIPE Inches

No. 40-P Plain to Threaded Steel No. 42-P Plain to Beveled Steel No. 43-P Plain to Grooved Steel

Size End to End

Aprx. Wgt. Each

Lbs

Price Each

Black

1 3 0.9 $34.00

1Z\x 4 0.9 34.00

2 4 1.2 34.00

2Z\x 4 1.9 39.50

3 4 2.5 48.00

4 6 5.4 79.50

6 * 6 9.5 211.50


* This size is available only in No. 42 grooved x beveled and No. 43 grooved x grooved.

97

Products for Plain end IPS Steel Pipe


SectIo

N 5

Pr

od

Uc

tS fo

r P

LaIN

eNd

IPS

SteeL PIP

e

plain end fittingsRequest publication 14.04.

No. 10-P

No. 11-P

PLaIN eNd fIttINGS – 90° eLBow or 45° eLBow

Nominal Size

90° Elbow No. 10-P

45° Elbow No. 11-P

Inches

Aprx. Weight Each

Lbs

Price Each Aprx. Weight Each

Lbs

Price Each


1 0.6 (d) $202.00 $224.00 0.6 (d) $120.50 $138.50

1Z\x 1.4 239.50 262.00 1.0 180.00 215.50

2 2.9 356.50 393.50 1.4 378.00 465.50

2Z\x 3.9 417.50 464.50 2.3 378.00 465.50

3 6.15 433.50 485.00 4.3 433.50 488.50

3Z\x 7.0 + + + + +

4 9.9 491.50 540.50 7.0 452.00 500.50

5 20.4 564.50 1134.00 18.0 564.50 664.50

6 20.4 (d) 714.50 869.50 11.9 (d) 647.00 760.50

8 42.0 1342.50 1517.50 28.5 759.00 1072.00

10 50.0 1775.50 1986.00 41.0 814.00 1018.50

12 156.0 1975.00 3039.00 57.8 1472.50 1734.00




No. 20-P

No. 61-P

PLaIN eNd fIttINGS – tee or BULL PLUG

Nominal Size

Tee No. 20-P

Bull Plug No. 61-P

Inches

Aprx. Weight Each

Lbs


Lbs

Price Each

Painted Galv. Electroplated

1 1.0 $226.00 $266.00 0.7 +

1Z\x 1.7 (d) 291.00 334.50 1.2 $203.50

2 3.0 291.00 326.50 2.0 203.50

2Z\x 6.8 379.50 430.50 3.0 203.50

3 9.0 584.00 667.50 4.5 297.50

3Z\x 12.5 + + 6.0 +

4 11.9 837.00 1046.50 7.5 384.00

5 17.1 1145.00 + 11.5 676.00

6 29.5 (d) 996.50 1144.00 17.0 901.50

8 71.5 1436.50 + 29.0 1694.00

10 116.0 + + 48.0 +

12 120.0 2734.00 + 60.0 4724.50






ctI

oN

5

Pr

od

Uc

tS f

or

PLa

IN e

Nd

IP

S S

teeL

PIP

e

plain end fittingsRequest publication 14.04.

No. 33-P

No. 30-P

PLaIN eNd fIttINGS – wye or LateraL

Nominal Size

Wye No. 33-P

Lateral No. 30-P

Inches

Aprx. Weight Each

Lbs


Lbs

Price Each


1 1.1 + + 3.5 + +

1Z\x 1.8 + + 3.5 $344.50 $405.50

2 2.9 + + 5.1 393.50 478.00

2Z\x 9.0 + + 9.3 453.00 532.50

3 8.5 + + 12.8 538.00 632.00

3Z\x 10.0 + + 20.0 + +

4 14.0 + + 19.0 740.50 830.00

5 21.6 + + 30.0 1257.50 1493.00

6 31.2 + + 43.3 1297.50 1574.50

8 36.0 + + 92.0 2177.50 2564.00

10 52.0 + + 106.0 2261.00 3955.50

12 81.2 + + 167.0 4157.50 5346.50


+ Quoted on application, other sizes available.

No. 35-P

PLaIN eNd fIttINGS – croSS

Nominal Size

Cross No. 35-P

Inches

Aprx. Weight Each

Lbs

Price Each

Painted Galv.

1 1.7 + +

1Z\x 3.5 + +

2 5.2 + +

2Z\x 5.4 + +

3 8.5 + +

3Z\x 9.0 + +

4 10.8 + +

5 20.0 + +

6 30.0 + +

8 66.4 + +

10 103.0 + +

12 158.0 + +



99

Products for Plain end IPS Steel Pipe


SectIo

N 5

Pr

od

Uc

tS fo

r P

LaIN

eNd

IPS

SteeL PIP

e

swaged nipples

No. 53-PRequest publication 14.04.

No. 53-P

No. 53-P – SwaGed NIPPLeS

Nominal Size Inches

Aprx. Wgt. Each

LbsPrice Each

Electroplated

1Z\x x 1 1.2 +

2 x 1 2.0 +

1Z\x 2.0 +

2Z\x x 1 3.0 +

1Z\x 3.0 +

2 3.0 +

3 x 1 4.5 +

1Z\x 4.5 +

2 4.5 +

2Z\x 4.5 +

3Z\x x 3 6.8 +

4 x 1 7.5 +

1Z\x 7.5 +

2 7.5 +

2Z\x 7.5 +

3 7.5 +

3Z\x 7.5 +

Nominal Size Inches

Aprx. Wgt. Each

LbsPrice Each

Electroplated

5 x 2 11.5 +

3 11.5 +

4 11.5 +

6 x 1 17.0 +

1Z\x 16.0 +

2 16.0 +

2Z\x 17.0 +

3 17.0 +

3Z\x 17.0 +

4 17.0 +

5 17.5 +

8 x 3 29.0 +

4 29.0 +

5 29.0 +

6 29.0 +


* Galvanized and other sizes available - quoted on application.


reducing tees

No. 25-PRequest publication 14.04.

No. 25-P

No. 25-P – redUcING tee

Nominal SizeReducing Tee

No. 25-P

Inches Run x Branch

Aprx. Wgt. Each

Lbs

Price Each

Painted Galv.

1Z\x x 1Z\x x 1 2.2 + +

2 x 2 x 1 2.9 + +

1Z\x 3.1 + +

3 x 3 x 1 6.7 + +

1Z\x 6.9 $248.50 $307.00

2 7.1 + 581.00

4 x 4 x 1 10.9 + +

1Z\x 11.1 + +

2 11.3 361.50 +

2Z\x 11.6 371.50 +

3 11.9 371.50 +

6 x 6 x 2 24.7 + +

3 25.4 + +

4 26.2 + 815.00

8 x 8 x 2 42.0 + +

3 44.0 + +

4 46.0 719.50 +

5 48.0 + +

6 50.0 843.50 +

10 x 10 x 4 74.0 + +

6 78.0 + +

8 86.0 + +

12 x 12 x 6 112.0 + +

8 118.0 + +

10 130.0 + +





ctI

oN

5

Pr

od

Uc

tS f

or

PLa

IN e

Nd

IP

S S

teeL

PIP

e

Pressfit® SystemProducts


system for type 304 stainless steel pipethe Victaulic® Vic-press 304 system for joining approved type 304/304l schedule 5s stainless steel pipe provides a fast, easy, clean, reliable means for joining Z\x– 2”/15 – 50 mm stainless steel pipe. Victaulic type 304 stainless steel pipe is 0.065”/1.6 mm wall thickness and meets the requirements of astm a-312. grade 304/304l (tp304 uns, designation s30400). only approved vic-Press 304/304L pipe can be used with vic-Press 304 stainless steel products.

the system is designed for pressure service to 300 psi/2065 kpa or ansi class 150 (except steam. according to standard temperature/pressure charts) for water, oil, non-combustible gaseous and general chemical services. refer to o-ring selection data for the intended service. the system requires no flame as with welding; no cutting oil, metal chips or preparation time as with threading or flanging. stainless steel pipe is cut to size, inserted into the couplin,. and the coupling is pressed into the pipe and fitting in seconds.

pressfit stainless system products are designed only for use on approved stainless steel pipe. terms on pressfit stainless steel pipe are Z\x% 10 net 30 days foB ship-ping point (our option) freight prepaid and charged.

pressfit stainless pipe sales may not be combined with pressfit stainless steel fittings or any other Victaulic products for any special terms. conditions or allowances. No returns of Pressfit stainless steel pipe will be allowed.

gasket selection o-rING SeLectIoN MUSt aLwayS Be SPecIfIed oN yoUr order

GRADE TEMP. RANGE COMPOUNDCOLOR CODE * GENERAL SERVICE RECOMMENDATIONS

STANDARD O-RING

E –30°F to +230°F EPDM Green Stripe

Recommended for hot water service within the specified tempera-ture range plus a variety of dilute acids, oil-free air and many chemi-cal services. Not recommended for petroleum services. Not recom-mended for steam services.

AVAILABLE O-RING

T –20°F to +180°F Nitrile Orange Stripe

Recommended for petroleum products, air with oil vapors, veg-etable and mineral oils within the specified temperature range. Not recommended for hot water services over +150°F/+66°C steam, or for hot dry air over +140°F/+60°C.

OPTIONAL O-RING – Contact Victaulic for delivery time

O +20°F to +300°F Fluoro-elastomer

Blue Stripe

Recommended for many oxidizing acids. petroleum oils, haloge-nated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons to +300°F/+149°C. Not recommended for steam services.

* Pressfit stainless steel products must only be used on services compatible with o-ring and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.

warNING• Before attempting to install any Pressfit system products, carefully read and

fully understand the “Pressfit Products Installation Instructions” (I-500) and the operating and maintenance manual supplied with the tool.

failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.


Pressfit System for type 304 Stainless Steel PipeSe

ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

30

4 S

S P

IPe

style 500

LooSe o-rINGS

G- _ _ _ -500-0 _ -0Request publication 18.02.

StyLe 500 – SPare PartS – LooSe o-rINGS

Nominal Size Inches

Grade “E” or “T” O-Rings

Price Each

Grade “O” * O-Ring

Price Each

Z\x $4.00 $14.50

C\v 4.50 14.50

1 5.00 19.00

1Z\x 7.50 32.00

2 10.00 44.00


* Contact Victaulic for delivery time.


style 597

StaNdard coUPLING ‡

(P X P) F- _ _ _ -597-X- _ -0Request publication 18.02.

StyLe 597 – wItH StaNdard o-rING Grade “e” or “t” or wItH oPtIoNaL o-rING Grade “o”

Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.12 $35.00 $47.50

C\v 0.16 38.00 52.00

1 0.23 43.50 63.00

1Z\x 0.45 59.50 93.00

2 0.73 78.00 124.50



† Specify choice of o-ring clearly on order.

‡ For slip coupling style see page 99 for pricing and o-ring options.

style 596

MaLe adaPter – tHreaded

(P X M) F- _ _ _ -596-X- _ -MRequest publication 18.02.


Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring

Grade E” or “T”

W/Optional O-Ring

Grade “O” *

Z\x x Z\x 0.22 $64.50 $70.50

C\v x Z\x 0.26 67.00 73.00

C\v 0.31 67.00 73.00

1 0.39 77.50 83.50

1 x C\v 0.35 80.00 88.50

1 0.40 80.00 88.50

1Z\x x C\v 0.60 149.50 165.50

1 1.50 134.00 157.00

1Z\x 0.66 134.00 150.00

2 x 2 1.00 165.00 187.00




103

Pressfit System for type 304 Stainless Steel Pipe


SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

304

SS

PIPe

style 599

feMaLe adaPter – tHreaded

(P X F) F- _ _ _ -599-X- _ -FRequest publication 18.02.


Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x x Z\x 0.26 $78.50 $84.50

C\v x Z\x 0.26 79.00 85.50

C\v 0.33 81.00 88.00

1 x Z\x 0.51 85.50 94.50

C\v 0.49 91.00 100.00

1 0.42 97.00 105.50

1Z\x x 1 0.80 154.00 169.00

1Z\x 0.80 193.00 211.50

2 x 1Z\x 1.10 190.00 209.50

2 1.00 209.50 230.50




style 590

90° eLBow

(P X P) F- _ _ _ -590-X- _ -PRequest publication 18.02.


Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.38 $59.00 $71.00

C\v 0.42 65.00 79.00

1 0.61 77.50 97.00

1Z\x 1.38 154.00 187.50

2 2.30 197.50 243.50




style 586

90° eLBow – SHort taNGeNt



Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

C\v 0.32 $75.00 $89.00

1 0.50 89.00 108.00

1Z\x 1.04 176.50 210.00

2 1.50 226.50 273.00






ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

30

4 S

S P

IPe

style 591

45° eLBow



Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.30 $59.00 $71.00

C\v 0.34 65.00 79.00

1 0.53 77.50 97.00

1Z\x 1.27 154.00 187.50

2 1.97 197.50 243.50




style 592

tee

(P X P X P) F- _ _ _ -592-X- _ -PRequest publication 18.02.


Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.28 $121.00 $139.50

C\v 0.32 134.00 155.00

1 0.44 143.50 172.00

1Z\x 0.86 183.50 233.50

2 1.37 229.00 299.00




style 593

tee – redUcING BraNcH



Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

C\v x Z\x 0.38 $135.50 $156.00

1 x Z\x 0.40 139.50 165.00

C\v 0.41 142.50 168.00

1Z\x x Z\x 0.70 168.50 208.50

C\v 0.73 170.50 210.50

1 0.76 171.00 214.50

2 x Z\x 1.00 219.50 272.50

C\v 1.25 223.00 276.50

1 1.13 229.50 285.50

1Z\x 1.25 253.00 316.00




105



SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

304

SS

PIPe

style 588

tee – redUcING BraNcH – tHreaded

(P X P X F) F- _ _ _ -588-X- _ -FRequest publication 18.02.


Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x x Z\x 0.30 $183.50 $195.50

C\v x Z\x 0.33 199.00 236.50

C\v 0.42 201.00 215.50

1 x Z\x 0.43 202.50 221.50

C\v 0.52 203.50 222.00

1 0.60 220.50 239.00

1Z\x x Z\x 0.79 229.50 286.50

C\v 0.88 232.00 286.50

1 0.94 253.50 286.50

2 x Z\x 1.17 261.50 308.00

C\v 1.26 264.50 310.50

1 1.32 283.50 330.00




style 594

coNceNtrIc redUcer

(T X T) F- _ _ _ -594-X-2-TRequest publication 18.02.

StyLe 594

Nominal Size

Inches

Aprx. Weight Each

Lbs Price Each

C\v x Z\x 0.20 $109.50

1 x Z\x 0.22 147.50

C\v 0.24 117.50

1Z\x x Z\x 0.35 208.00

C\v 0.36 195.00

1 0.39 108.50

2 x Z\x 0.58 387.00

C\v 0.61 173.50

1 0.61 134.00

1Z\x 0.68 134.00

style 595

fLaNGe adaPter

(P X L) F- _ _ _ -595-X- _ -LRequest publication 18.02.


Nominal Size

Aprx. Weight Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 2.70 $498.00 $504.00

C\v 2.90 512.00 518.50

1 3.20 520.00 529.00

1Z\x 4.50 634.50 650.50

2 5.30 706.00 728.00






ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

30

4 S

S P

IPe

style 565

fLaNGe adaPter (vaN StoNe tyPe)



Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 3.00 $173.00 $181.00

C\v 3.30 173.00 182.50

1 3.60 233.50 245.50

1Z\x 5.00 257.50 278.50

2 5.90 276.00 305.00




style 587

traNSItIoN NIPPLe

Grooved to Tangent (G X T) F- _ _ _ -587-X-2-TRequest publication 18.02.

StyLe 587

Nominal Size

Inches

Aprx. Weight

Each Lbs

End to End Inches Price Each

C\v 0.19 4 $91.00

1 0.25 4 94.00

1Z\x 0.36 4 118.00

2 0.46 4 123.50


series 589

PreSSfIt SySteM BraSS Body BaLL vaLve

Stainless Steel Pressfit Ends V- _ _ _ -589-X- _ -PRequest publication 18.02.

SerIeS 589 – PreSSfIt eNdS wItH Grade “e” or “t” o-rINGS or PreSSfIt eNdS wItH oPtIoNaL Grade “o” o-rINGS

Nominal SizeAprx.

Weight Each End to End Price Each †

Inches Lbs Inches

Pressfit Ends (P X P) With Grade “E” or “T”

O-Rings

Pressfit Ends (P X P) With Optional Grade

“O” * O-Rings

Z\x 1.0 8.49 $212.50 $225.00

C\v 1.3 8.84 233.50 247.00

1 1.8 9.68 280.00 298.50

1Z\x 3.4 11.07 393.00 426.00

2 4.4 12.89 481.50 528.50




107



SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

304

SS

PIPe

style 584

tHreaded UNIoN **

(P X P) C- _ _ _ -584-X- _ -PRequest publication 18.02.


Nominal Size

Aprx. Weight

Each Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 2.80 $409.00 $424.50

C\v 3.50 464.00 482.00

1 3.80 564.50 588.50

1Z\x 5.40 966.00 1007.50

2 6.10 1191.50 1249.00




** Grooved End Union - A grooved end union can be formed with two Style 587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For standard ductile iron couplings, stainless steel couplings and gaskets refer to Main Price List.

style 582

redUcer INSert

(P X T) F- _ _ _ -582-X- _ -TRequest publication 18.02.

StyLe 582 – wItH StaNdard o-rING Grade “e” or “t”

Nominal Size

Aprx. Weight

Each Unit Price Each †

Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

1 x C\v 0.24 $94.50 $101.50

2 x 1Z\x 0.68 115.50 132.50




style 561

adaPter

(P X T) F- _ _ _ -561-X- _ -T

StyLe 561 – wItH StaNdard o-rING Grade “e” or “t”

Nominal Size

Aprx. Weight


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x x Z\x 0.22 $64.50 $71.00

C\v x C\v 0.26 48.50 74.00

1 x 1 0.40 80.00 89.50

1Z\x x 1Z\x 0.66 139.50 174.50

2 x 2 1.00 165.00 189.00






ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

30

4 S

S P

IPe

Vic-press 304 pipe For Type 304/304L Schedule 5S stainless steel pipe approved for use with the Victaulic Vic-Press 304 System for stainless steel pipe, contact Victaulic or your nearest Vic-Press 304 Stainless Steel distributor. Approved pipe meets the requirements of ASTM A-312, Grade 304/304L and carries the label, “Vic-Press 304™ Pipe. Certified for use with Vic-Press 304 Products.”

Vic-Press 304 System products are designed only for use on approved Vic-Press 304 stainless steel pipe.

Terms on Vic-Press 304 pipe are Z\x% 10 net 30 days FOB shipping point (our option) freight prepaid and charged.

Vic-Press 304 pipe sales may not be combined with Vic-Press 304 fittings or any other Victaulic products for any special terms, conditions or allowances. No returns of Vic-Press 304 pipe will be allowed.

style 905

vIc-PreSS 304 PIPe

T- _ _ _ -905-X-0- _ _Request publication 18.02.

Pipe is supplied in random mill lengths (RML) (17 – 24 ft) that measures 21 ft. (nominal). Order quanti-ties will be accepted only in 21 ft. random length increments, subject to industry standard ±10% tolerance. Minimum footage requirements must be specified on the order when required.

NOTE: Pressfit pipe is non-cancellable and non-returnable.StyLe 905 – vIc-PreSS 304 ScHedULe 5S PIPe

Pipe InchesAprx.

Pipe Weight Price

Nominal Size Outside Diameter Wall Thickness Per Ft. Per 100 Feet

Z\x 0.840 0.065 0.60 $800.00

C\v 1.050 0.065 0.70 900.00

1 1.315 0.065 0.90 1000.00

1Z\x 1.900 0.065 1.30 1300.00

2 2.375 0.065 1.60 1550.00


pressfit tools The Pressfit System requires a Pressfit Tool specifically designed for Pressfit products on approved Schedule 5 pipe. Refer to Section 13 – Pipe Preparation Tools for monthly rental rates and where to call for purchase information.

NOTE: Victaulic Tool Discount will apply.

Pft505 eLectrIc tooL Pft509 Battery oPerated tooL

109



SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

304

SS

PIPe

system for type 316 stainless steel pipethe Victaulic® Vic-press 316 system for joining approved type 316/316l schedule 5s stainless steel pipe provides a fast. easy. clean. reliable means for joining Z\x–2”/15 – 50 mm stainless steel pipe. Victaulic type 316 stainless steel pipe is 0.065”/1.6 mm wall thickness and meets the requirements of astm a-312. grade 316/316l (tp316 uns. designation s31600). only approved vic-Press 316/316L pipe can be used with vic-Press 316 stainless steel products.

the system is designed for pressure service to 300 psi/2065 kpa or ansi class 150 (except steam. according to standard temperature/pressure charts) for water. oil. non-combustible gaseous and general chemical services. refer to o-ring selection data for the intended service. the system requires no flame as with welding; no cutting oil. metal chips or preparation time as with threading or flanging. stainless steel pipe is cut to size. inserted into the coupling. and the coupling is pressed into the pipe and fitting in seconds.

pressfit stainless system products are designed only for use on approved stainless steel pipe. terms on pressfit stainless steel pipe are Z\x% 10 net 30 days foB ship-ping point (our option) freight prepaid and charged.

pressfit stainless pipe sales may not be combined with pressfit stainless steel fittings or any other Victaulic products for any special terms. conditions or allowances. No returns of Pressfit stainless steel pipe will be allowed.

gasket selection o-rING SeLectIoN MUSt aLwayS Be SPecIfIed oN yoUr order

GRADE TEMP. RANGE COMPOUNDCOLOR CODE * GENERAL SERVICE RECOMMENDATIONS

STANDARD O-RING

E –30°F to +230°F EPDM Green Stripe

Recommended for hot water service within the specified tempera-ture range plus a variety of dilute acids, oil-free air and many chemi-cal services. Not recommended for petroleum services. Not recom-mended for steam services.

AVAILABLE O-RING

T –20°F to +180°F Nitrile Orange Stripe

Recommended for petroleum products, air with oil vapors, veg-etable and mineral oils within the specified temperature range. Not recommended for hot water services over +150°F/+66°C steam, or for hot dry air over +140°F/+60°C.

OPTIONAL O-RING – Contact Victaulic for delivery time

O +20°F to +300°F F l u o r o - elastomer

Blue Stripe

Recommended for many oxidizing acids. petroleum oils, haloge-nated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons to +300°F/+149°C. Not recommended for steam services.

* Pressfit stainless steel products must only be used on services compatible with o-ring and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.

warNING• Before attempting to install any Pressfit system products, carefully read and

fully understand the “Pressfit Products Installation Instructions” (I-500) and the operating and maintenance manual supplied with the tool.

failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.



ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

316

SS

PIP

e

style 500

LooSe o-rINGS

G- _ _ _ -500-0 _ -0Request publication 18.01.

StyLe 500 – SPare PartS – LooSe o-rINGS

Nominal Size Inches

Grade “E” or “T” O-Rings

Price Each

Grade “O” * O-Ring

Price Each

Z\x $4.00 $14.50

C\v 4.50 14.50

1 5.00 19.00

1Z\x 7.50 32.00

2 10.00 44.00



style 507

StaNdard coUPLING



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.13 $39.00 $51.00

C\v 0.16 44.50 58.00

1 0.23 50.50 70.00

1Z\x 0.45 69.50 103.00

2 0.73 102.00 149.00




style 508

SLIP coUPLING



Nominal Size


Inches Lbs

W/Standard O-Ring Grade

“E” or “T”

W/Optional O-Ring

Grade “O” *

Z\x 0.20 $46.00 $58.00

C\v 0.23 50.50 64.50

1 0.32 57.50 76.00

1Z\x 0.58 75.00 108.00

2 0.87 95.50 142.50




111



SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

316 S

S PIP

e

style 576

MaLe adaPter – tHreaded

(P X M) F- _ _ _ -576-X- _ -MRequest publication 18.01.


Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O”

Z\x x Z\x 0.20 $66.50 $72.50

C\v x Z\x 0.26 69.50 76.00

C\v 0.31 69.50 76.00

1 0.39 80.50 +

1 x C\v 0.35 82.00 90.50

1 0.40 82.00 90.50

1Z\x x C\v 0.60 151.50 172.00

1Z\x 0.66 172.00 187.50

2 x 2 1.00 223.00 245.00




series 569

StaINLeSS SteeL BaLL vaLve wItH LockING HaNdLe

V- _ _ _ -569-X-0-0 V- _ _ _ -569-X-0-G V- _ _ _ -569-X-T-GRequest publication 18.01.

SerIeS 569 – PLaIN eNd, Grooved eNdS, or PLaIN eNd X� Grooved

Nominal SizeAprx.

Weight Each End to End Price Each *

Inches Lbs InchesPlain End

(T X T)Grooved Ends

(G X G)

Plain End X Grooved

(T X G)

Z\x 2.20 8.49 $253.50 N/A N/A

C\v 2.40 8.57 296.00 $296.00 $296.00

1 3.60 8.89 359.50 359.50 359.50

1Z\x 6.90 11.20 567.50 567.50 567.50

2 9.50 12.52 752.00 752.00 752.00


* Specify end choice of o-ring clearly on order.

series 569

rePaIr kItS

K- _ _ _ -569-0-0 _ -1Request publication 18.01.

SerIeS 569 rePaIr kItS

Nominal Size Price Each

Inches Repair Kit

Type 316 Stainless Steel Ball Stem

Z\x $32.00 $43.50 +

C\v 33.00 42.50 +

1 41.50 53.00 +

1Z\x 88.00 116.50 +

2 132.00 199.00 +





ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

316

SS

PIP

e

style 570

90° eLBow



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.38 $117.50 $130.00

C\v 0.42 126.50 139.50

1 0.61 141.50 160.00

1Z\x 1.38 190.00 224.00

2 2.30 261.00 308.00




style 568

90° eLBow – SHort taNGeNt



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

C\v 0.32 $144.50 $158.50

1 0.50 162.00 180.50

1Z\x 1.04 218.50 252.50

2 1.50 301.00 347.00




style 571

45° eLBow



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.30 $117.50 $130.00

C\v 0.34 126.50 139.50

1 0.53 141.50 160.00

1Z\x 1.27 190.00 224.00

2 1.97 261.00 308.00




113



SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

316 S

S PIP

e

style 572

tee



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 0.28 $277.00 $295.50

C\v 0.32 300.00 321.50

1 0.44 314.50 343.00

1Z\x 0.86 370.50 420.50

2 1.37 457.00 527.00




style 573

tee – redUcING BraNcH



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

C\v x Z\x 0.38 $317.00 $336.50

1 x Z\x 0.39 344.50 369.50

C\v 0.41 358.00 384.00

1Z\x x Z\x 0.74 506.00 546.00

C\v 0.75 510.00 558.50

1 0.76 522.50 566.00

2 x Z\x 1.00 591.50 649.00

C\v 1.25 609.50 663.50

1 1.13 679.00 735.50

1Z\x 1.25 697.00 760.00




style 574

coNceNtrIc redUcer

(T X T) F- _ _ _ -574-X-2-TRequest publication 18.01.

StyLe 574

Nominal Size

Inches

Aprx. Weight Each

Lbs Price Each

C\v x Z\x 0.20 $128.50

1 x Z\x 0.22 164.00

C\v 0.24 121.00

1Z\x x Z\x 0.34 244.00

C\v 0.36 160.00

1 0.39 112.00

2 x Z\x 0.59 422.50

C\v 0.61 184.00

1 0.61 137.50

1Z\x 0.68 137.50




ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

316

SS

PIP

e

style 575

fLaNGe adaPter



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 2.7 $505.00 $511.50

C\v 2.9 514.50 521.50

1 3.2 526.50 535.00

1Z\x 4.5 638.50 654.00

2 5.3 709.50 732.00




style 577

adaPter NIPPLe

(G X T) F- _ _ _ -577-X-2-TRequest publication 18.01.

StyLe 577

Nominal Size

Inches

Aprx. Weight Each

Lbs Price Each

C\v 0.19 $93.50

1 0.26 97.00

1Z\x 0.36 121.50

2 0.46 127.00


style 578

tee – redUcING BraNcH tHreaded

(P X P X F) F- _ _ _ -578-X- _ -FRequest publication 18.01.


Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x x Z\x 0.30 $386.50 $398.00

C\v x Z\x 0.33 428.50 442.00

C\v 0.42 439.50 453.50

1 x Z\x 0.43 469.50 497.00

C\v 0.52 478.50 505.50

1 0.60 514.50 542.00

1Z\x x Z\x 0.79 562.00 595.50

C\v 0.88 582.00 615.50

1 0.94 605.50 639.00

2 x Z\x 1.17 620.00 667.00

C\v 1.26 642.50 689.00

1 1.32 681.00 728.00




115



SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

316 S

S PIP

e

style 585

tHreaded UNIoN **

(P X P) C- _ _ _ -585-X- _ -ORequest publication 18.01.


Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 2.80 $418.00 $429.00

C\v 3.50 482.00 496.00

1 3.80 589.00 612.50

1Z\x 5.40 975.00 1016.00

2 6.10 1288.50 1345.50




** Grooved End Union - A grooved end union can be formed with two Style 588 (Type 316 stainless) transition nipples (see previous page) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For standard ductile iron couplings, stainless steel couplings and gaskets, refer to Section 1.

style 566

fLaNGe adaPter (vaN StoNe tyPe)



Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x 3.00 $173.00 $182.50

C\v 3.30 173.00 182.50

1 3.60 233.50 +

1Z\x 5.00 257.50 +

2 5.90 276.00 305.00




style 579

feMaLe adaPter – tHreaded

(P X F) F- _ _ _ -579-X- _ -FRequest publication 18.01.


Nominal Size


Inches Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

Z\x x Z\x 0.22 $88.50 $94.50

C\v x Z\x 0.26 92.00 98.50

C\v 0.33 94.00 100.50

1 x Z\x 0.51 98.50 107.50

C\v 0.49 104.00 112.50

1 0.42 109.50 118.00

1Z\x x 1 0.80 184.00 202.50

1Z\v 0.60 184.00 203.00

1Z\x 0.80 231.00 254.00

2 x 1Z\v 0.90 228.50 +

1Z\x 1.10 228.50 +

2 1.00 251.00 276.00






ctI

oN

6

Pr

eS

SfIt

SyS

teM

fo

r t

yPe

316

SS

PIP

e

style 583

redUcer INSert

(P X T) F- _ _ _ -583-X- _ -TRequest publication 18.01.


Nominal Size No. Pieces

Aprx. Weight


Inches Per Bag Lbs

W/Standard O-Ring


W/Optional O-Ring

Grade “O” *

1 x C\v 10 0.34 $95.50 $103.00

2 x 1Z\x 5 0.68 128.00 145.00




Vic-press 316 pipe For Type 316/316L Schedule 5S stainless steel pipe approved for use with the Victaulic Vic-Press 316 System for stainless steel pipe, contact Victaulic or your nearest Vic-Press 316 Stainless Steel distributor.

Approved pipe meets the requirements of ASTM A-312, Grade 316/316L and carries the label, “Vic-Press 316™ Pipe. Certified for use with Vic-Press 316 Products.”

The Pressfit Stainless System requires no special preparation of the pipe ends before assembly. Pipe must be square cut (±0.030”) and deburred to prevent damage to the o-ring during assembly.

Pressfit Stainless System products are designed only for use on approved stainless steel pipe.

Terms on Vic-Press 316 pipe are Z\x% 10 net 30 days FOB shipping point (our option) freight prepaid and charged.

Vic-Press 316 pipe sales may not be combined with Vic-Press 316 fittings or any other Victaulic products for any special terms, conditions or allowances. No returns of Vic-Press 316 pipe will be allowed.

style 905

vIc-PreSS 316 PIPe

T- _ _ _ -905-X-00Request publication 18.01.

Pipe is supplied in random mill lengths (RML) (17 – 24 ft) that measure 21 ft. (nominal). Order quantities will be accepted only in 21 ft. random length increments, subject to industry standard ±10% tolerance. Minimum footage requirements must be specified on the order when required.

NOTE: Pressfit pipe is non-cancellable and non-returnable.StyLe 905 - vIc-PreSS 316 ScHedULe 5S PIPe

Pipe Inches

Aprx. Pipe Weight

Per Ft. Price

Nominal Size Outside Diameter Wall Thickness Lbs Per 100 Feet

Z\x 0.840 0.065 0.60 $1350.00

C\v 1.050 0.065 0.70 1400.00

1 1.315 0.065 0.90 1600.00

1Z\x 1.900 0.065 1.30 2100.00

2 2.375 0.065 1.60 2600.00


pressfit tools The Pressfit System requires a Pressfit Tool specifically designed for Pressfit products on approved Schedule 5 pipe. Refer to Section 13 – Pipe Preparation Tools for monthly rental rates and where to call for purchase information.

NOTE: Victaulic Tool Discount will apply.

Pft505 eLectrIc tooL Pft509 Battery oPerated tooL

117



SectIo

N 6

Pr

eS

SfIt SySteM

for

tyPe

316 S

S PIP

e


HdPe Products


products for plain end hdpe plastic pipe(See Section 2 for Style 920/920N Mechanical-T Outlets.)

hdpe coupling *



PIPE Inches

Aprx. Weight Each

COUPLING COMPLETE † With Grade “E” or “T” Gasket Grade “E” or “T”

Plated Bolt & Nut

Nominal Size

Outside Diameter Lbs

Price Each

Gasket OnlySize

InchesPainted Plated

2 2.375 3.5 $308.50 $372.00 $32.00 Z\x x 2Z\x

3 3.500 7.7 368.50 437.00 37.50 Z\x x 2C\v

4 4.500 11.6 405.00 + 54.00 Z\x x 2C\v

5 5.563 15.0 482.50 + 64.50 B\, x 3Z\v

6 6.625 16.4 563.00 671.00 78.50 B\, x 3Z\v

8 8.625 24.9 660.00 795.50 102.50 B\, x 3Z\v

10 10.750 37.4 759.00 950.00 131.50 C\v x 5

12 12.750 47.8 874.50 1098.50 160.50 M\, x 5

14 14.000 81.0 2557.50 + 252.00 1 x 7 #

16 16.000 100.0 3413.00 + 299.00 1 x 7 #

18 18.000 127.0 4182.00 + 313.00 1 x 7 #

20 20.000 142.0 5679.00 + 339.00 1 x 7 #





* Coupling for High Density Polyethylene Pipe.Style 99 gaskets fit Style 995 couplings up to 12”.# Supplied with T-bolts and rocker washer.

StyLe 995 – HdPe coUPLING kItS INcLUdeS PLated BoLt aNd NUt, HardeNed waSHer aNd INStrUctIoN SHeet

Size Inches Price Each

2 $63.50

3 63.50

4 63.50

5 67.00

6 67.00

8 67.00

10 69.50

12 +



Products for Plain end HdPe Plastic PipeSe

ctI

oN

7

Pr

od

Uc

tS f

or

PLa

IN e

Nd

Hd

Pe

PLa

StI

c P

IPe

flange adapter for hdpe pipe



PIPE Inches

HDPE FLANGE COMPLETE † With Grade “E” or “T” Gasket

Grade “E” or “T” Gasket

Nominal Size

Outside Diameter

Aprx. Weight Each

Lbs Price Each Price Each

4 4.500 12.5 $472.00 $114.50

6 6.625 17.3 664.00 116.50

8 8.625 30.8 778.00 119.50



HDPE Flange has ductile iron housing. Standard flange bolts, for ANSI Class 125 or 150 mating flanges must be supplied by the installer.

transition coupling

(HdPe to SteeL) StyLe 997Request publication 19.03.


PIPE Inches

Aprx. Weight Each

COUPLING COMPLETE † With Grade “E” or “T” Gasket

Grade “E” EPDM or

Grade “T” Nitrile

Plated Bolt & Nut

Nominal Size


Price Each

Gasket OnlySize

InchesPainted Plated

2 2.375 3.0 $332.50 $368.50 $25.50 C\, x 2

3 3.500 6.6 389.50 451.50 32.50 Z\x x 2C\v

4 4.500 8.7 455.00 534.00 40.50 Z\x x 2C\v

5 5.563 11.5 521.00 + 53.00 Z\x x 3Z\v

6 6.625 14.8 625.00 751.50 57.00 B\, x 3Z\v

8 8.625 21.7 719.50 896.00 78.00 B\, x 3Z\x

10 10.750 34.3 992.50 + 98.50 C\v x 5Z\x

12 12.750 37.5 1135.50 + 114.50 M\, x 5Z\x




Style 77 gaskets fit Style 997 couplings.

121

Products for Plain end HdPe Plastic Pipe


SectIo

N 7

Pr

od

Uc

tS fo

r P

LaIN

eNd

Hd

Pe

PLa

StIc

PIPe


copper Products


the copper connection grooved piping system for copper tubing

gasket selection For Gasket Selection Guide refer to page 9 or publication 05.01.

QuickVic rigid coupling for copper


StyLe 607 – Grade “eHP” GaSket

PIPE Inches

Approximate Weight

Each

COUPLING COMPLETE

With “EHP” Gasket SPARE PARTS

Nominal Size Lbs Price Each“EHP” Gasket

2 1.9 $36.00 $29.50

2Z\x 2.1 41.00 32.00

3 3.0 45.50 34.00

4 3.3 69.50 50.00

5 5.5 117.50 83.50

6 5.8 155.50 109.50

8 7.7 241.50 170.50


copper mechanical-t Bolted Branch outlet


StyLe 622 – Grade “e” ePdM GaSket

Run x Branch

Approximate Weight

Each

COMPLETE MECHANICAL-T With

Grade “E” Gasket

Nominal Size Inches Lbs Price Each

2Z\x x C\v 3.1 $140.50

1 3.2 160.50

1Z\x 4.1 199.00

3 x C\v 3.4 156.50

1 3.6 167.50

1Z\x 4.5 208.50

4 x C\v 3.3 177.00

1 4.0 187.00

1Z\x 5.0 227.00


copper connection for Grooved copper tubingSe

ctI

oN

8

co

PPer

co

NN

ectI

oN

fo

r G

ro

ove

d c

oP

Per

tU

BIN

G

copper mechanical-t cross


StyLe 622 – Grade “e” ePdM GaSket

Run x Branch

Approximate Weight

Each

COMPLETE MECHANICAL-T With

Grade “E” Gasket

Nominal Size Inches Lbs Price Each

2Z\x x C\v 4.2 $258.00

1 4.4 306.00

1Z\x 6.2 393.50

3 x C\v 4.4 274.00

1 4.8 317.50

1Z\x 6.6 413.50

4 x C\v 4.5 332.50

1 5.4 354.00

1Z\x 7.4 439.50


copper connection Vic-flange® adapters

StyLe 641

To connect grooved copper to flanged equipmentRequest publication 22.03.


PIPE Inches

VIC-FLANGE ADAPTER COMPLETE † With Grade “E” Gasket SPARE PARTS

Nominal Size

Outside Diameter

Aprx. Weight Each

LbsPrice Each

PaintedGasket

Price EachVic-Flange®

Washers

2 2.125 3.8 $282.50 $23.50 $37.50

2Z\x 2.625 4.7 294.00 26.00 41.00

3 3.125 5.4 308.00 28.50 44.00

4 4.125 7.7 338.00 36.00 70.00

5 5.125 9.3 455.00 44.50 76.50

6 6.125 10.3 495.00 51.00 86.50




Vic-Flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Vic-Flange adapter is otherwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a phenolic (Type F) Flange Washer be inserted between the Vic-Flange adapter and the mating flange to provide the necessary sealing surface.

Typical applications where a Vic-Flange Washer should be used are:

1. When mating to a serrated flange: a flange gasket should be used adjacent to the ser-rated flange and then the flange washer is inserted between the Vic-flange adapter and the flange gasket.

2. When mating to a wafer valve: where typical valves are rubber lined and partially rub-ber faced (smooth or not), the flange washer is placed between the valve and the Vic-flange adapter.

3. When mating to a rubber faced flange: the flange washer is placed between the Vic-flange adapters and the rubber faced flange.

4. When mating c.i. flanges to ips flanges: the flange washer is placed between the two Vic-flange adapters. if one flange is not a Vic-flange adapter (e.g., flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Vic-flange adapter.

5. When mating to components (valves, strainer, etc.) where the component flange face has an insert: follow the same arrangement as in #1 above.

125

copper connection for Grooved copper tubing


SectIo

N 8

c

oP

Per

co

NN

ectIo

N fo

r G

ro

oved

co

PPer

tUB

ING

copper connection fittingsRequest publication 22.04.

No. 610 No. 611

coPPer fIttINGS – 90° eLBow or 45° eLBow

Nominal Size

90° ELBOW No. 610

45° ELBOW No. 611

Inches

Aprx. Weight Each

Lbs Price Each

Aprx. Weight Each

Lbs Price Each

2 0.9 $64.50 0.8 $64.50

2Z\x 1.3 70.00 1.1 70.00

3 4.1 98.50 1.6 98.50

4 6.7 227.50 3.4 227.50

5 15.0 647.50 10.0 647.50

6 20.0 1033.50 13.0 1033.50

8 26.0 1941.50 15.6 1941.50


copper connection fittingsRequest publication 22.04.

No. 620 No. 660

coPPer fIttINGS – tee or caP

Nominal Size

TEE No. 620

CAP No. 660

Inches

Aprx. Weight Each

Lbs Price Each

Aprx. Weight Each

Lbs Price Each

2 1.1 $106.50 1.2 $44.50

2Z\x 1.8 113.50 1.4 65.50

3 3.2 169.00 1.4 82.50

4 6.1 371.50 2.4 124.00

5 18.5 1043.00 3.5 140.00

6 25.5 1289.00 4.2 254.50

8 45.0 2302.50 – –


copper connection concentric reducer

No. 650Request publication 22.04.

No. 650 Grooved X� Groove

Nominal SizeAprx.

Weight Each End to End No. 650 Grooved x Grooved

Inches Lbs Inches Price Each

2Z\x x 2 1.00 3.13 $93.00

3 x 2 0.95 3.38 93.00

2Z\x 1.03 3.13 93.00

4 x 2 1.65 3.88 191.50

2Z\x 1.95 3.63 191.50

3 2.02 3.38 191.50

5 x 3 6.30 3.88 541.00

4 6.30 3.38 541.00

6 x 3 6.40 4.38 585.50

4 6.50 3.88 585.50

5 6.70 3.38 585.50

8 x 6 10.00 5.00 1029.00




ctI

oN

8

co

PPer

co

NN

ectI

oN

fo

r G

ro

ove

d c

oP

Per

tU

BIN

G



No. 652 Grooved X� cUP

Nominal SizeAprx.

Weight Each End to End Cup No. 652 Grooved x Cup

Inches Lbs Inches Inches Price Each

2 x 1 0.50 2.70 0.91 $77.00

1Z\v 0.45 3.00 0.97 77.00

1Z\x 0.45 2.94 1.09 77.00

2Z\x x 1 0.78 3.25 0.91 94.50

1Z\v 0.60 3.52 0.97 94.50

1Z\x 0.65 3.45 1.09 94.50

2 0.65 3.30 1.34 94.50

3 x 1Z\x 1.06 3.68 1.09 117.00

2 0.99 4.10 1.34 117.00

4 x 2 1.95 4.75 1.34 219.00


No. 653 Grooved X� PLRequest publication 22.04.

No. 653 Grooved X� PL

Size Inches Wgt. Lbs Bag Qty. Part Code List Price

2 x 1 0.65 1 FB60653CGP $99.50

1Z\v 0.64 1 FB64653CGP 99.50

1Z\x 0.72 1 FB67653CGP 99.50

2Z\x x 1 0.93 1 FC00653CGP 122.00

1Z\v 0.79 1 FC01653CGP 122.00

1Z\x 0.92 1 FC03653CGP 122.00

3 x 1Z\x 0.92 1 FC40653CGP 151.50


copper connection reducing tee


No. 625 Grooved X� Groove

Nominal SizeAprx.

Weight Each No.625 Grooved x Grooved


2Z\x x 2 1.58 $169.50

3 x 2 2.14 218.00

2Z\x 2.43 288.00

4 x 2 5.25 489.00

2Z\x 5.75 489.00

3 6.25 489.00

5 x 3 5.41 1495.00

4 8.75 1495.00

6 x 2Z\x 6.66 1825.50

3 8.12 1825.50

4 9.75 1825.50

5 11.25 1825.50


dielectric Waterway transition fittings

For CTS to IPS Connections. See page 57.

127



SectIo

N 8

c

oP

Per

co

NN

ectIo

N fo

r G

ro

oved

co

PPer

tUB

ING



No. 626 Grooved X� cUP

Nominal Size Weight Each No. 626 Grooved x Grooved x Cup


2 x C\v 0.75 $136.50

1 0.81 136.50

1Z\v 0.85 136.50

1Z\x 0.87 136.50

2Z\x x C\v 1.00 174.50

1 1.17 170.00

1Z\v 1.23 170.00

1Z\x 1.32 170.00

3 x C\v 1.40 315.00

1 1.45 315.00

1Z\v 1.74 315.00

1Z\x 1.74 315.00

4 x C\v 2.75 372.50

1 2.86 489.00

1Z\v 3.03 489.00

1Z\x 3.16 489.00






2 x C\v 0.84 1 FB72627CGP $163.00

1 0.96 1 FB73627CGP 163.00

1Z\v 1.04 1 FB75627CGP 163.00

1Z\x 1.14 1 FB76627CGP 163.00

2Z\x x C\v 1.26 1 FC14627CGP 208.00

1 1.32 1 FC15627CGP 203.00

1Z\v 1.42 1 FC16627CGP 203.00

1Z\x 1.59 1 FC17627CGP 203.00

3 x C\v 1.54 1 FC60627CGP 346.50

1 1.60 1 FC62627CGP 346.50

1Z\v 1.93 1 FC63627CGP 346.50

1Z\x 2.01 1 FC64627CGP 346.50

4 x C\v 2.95 1 FD66627CGP 445.00

1 3.01 1 FD67627CGP 538.00

1Z\v 3.22 1 FD69627CGP 538.00

1Z\x 3.43 1 FD72627CGP 538.00




ctI

oN

8

co

PPer

co

NN

ectI

oN

fo

r G

ro

ove

d c

oP

Per

tU

BIN

G

copper connection Butterfly Valves

SerIeS 608

EPDM (Grade E) Disc (Fig. V - _ _ _ -362 _ - _ _) Cast Bronze BodyRequest publication 22.05.

SerIeS 608 – Bare vaLve, two PoSItIoN deteNt, Lever oPerator, or Gear oPerator

Copper Size Bare Valve Two Position Detent Lever Operator Gear Operator

Actual Inches

Size Code (3622-00) † (362-15) † (3622-11) † (3622-20) †

2Z\x 024 $552.00 $610.00 $680.00 $1113.50

3 030 618.00 723.50 746.50 1179.50

4 040 817.50 N/A 945.00 1378.50

5 050 1073.50 N/A 1201.50 1634.00

6 060 1156.00 N/A 1284.50 1717.50


† See valve numbering chart for reference.

Valve options

When ordered separately from the valve, these items are pro-vided as a kit.

SerIeS 608 Gear oPerator

SerIeS 608 – vaLve oPtIoNS

Copper SizeBracket Insulation

[mm]

Actual Inches

Size Code (3_ _3 -_ _) †

2Z\x 024 $73.00

3 030 73.00

4 040 75.50

5 050 75.50

6 060 92.50



129



SectIo

N 8

c

oP

Per

co

NN

ectIo

N fo

r G

ro

oved

co

PPer

tUB

ING

handwheels for gear operators

fItS vIc-300 MaSterSeaL, SerIeS 700, 726 aNd 608 Gear oPeratorS

vIc-300® MaSterSeaL aNd SerIeS 608

Valve Size Inches

Handwheel Diameter

Inches Price Each

1Z\x - 5 4 $34.50

6 – 165.1 mm 5 70.50

8 6 70.50

10 - 12 8 70.50


oPerator oPtIoNS

When ordered separately from the valve, these items are pro-vided as a kit.

SerIeS 608 – oPerator oPtIoNS

Copper Size Chain Wheel Memory StopAprx.

Weight Each

Actual Inches

Size Code (3 _ _ _ - 22) † (3 _ _ _ - 21) † Lbs

2Z\x 024 $400.50 + 3.5

3 030 400.50 + 3.5

4 040 400.50 + 3.5

5 050 400.50 + 3.5

6 060 400.50 + 5.0




Gear Operators available with both memory stop and chain wheel - add both adders (1 _ _ _ - 24).


V - 040 - 11- 3 6 6 6

Type In./mmSize

CodePressure

Rating Body Disc/Trim Bracket Operator

V 024030040050060

2½/63.53/76.14/101.65/127.06/152.4

3 - 300 psi 6 - Bronze (w/copper connection grooves)

9 - Special*

1 - Buna/Bronze-“T”2 - EPDM/Bronze-“E”

9 - Special*

0 - No Bracket (2)2 - Standard3 - Standard with Insulation

9 - Special*

00 -Bare11 - Lever handle with memory stop15 - 2 position detent handle (sizes 2½ & 3"/63.5 & 76.1 mm only)20 - Gear Operator21 - Gear Operator with memory stop22 - Gear Operator with chainwheel23 - Gear Operator with AWWA square oper. nut24 - Gear Operator with memory stop and chainwheel29 - Non-std. gear operator*LD - 10 position handle with tamper- proof locking device

NOTES:(2) Used with 2 position detent handle only* Details required



ctI

oN

8

co

PPer

co

NN

ectI

oN

fo

r G

ro

ove

d c

oP

Per

tU

BIN

G

PermaLynx System Products


pl600 coupling

PL X� PL (wrot)Request publication 22.20

PL600 coUPLING

Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price

Z\x 0.04 10 20-001-10 Y004600CEP $5.00

C\v 0.09 10 20-001-20 Y006600CEP 6.00

1 0.16 5 20-001-30 Y010600CEP 9.50

1Z\v 0.21 1 20-001-40 Y012600CEP 12.00

1Z\x 0.30 1 20-001-50 Y014600CEP 16.50

pl600r coupling (r)


PL600r coUPLING (r)


C\v x Z\x 0.08 10 20-001-21 YU67600CEP $11.00

1 x Z\x 0.13 1 20-001-32 YK26600CEP 12.00

C\v 0.14 5 20-001-31 YA83600CEP 12.00

1Z\v x C\v 0.23 1 20-001-42 YB04600CEP 13.00

1 0.21 1 20-001-41 YB05600CEP 17.50

1Z\x x 1 0.28 1 20-001-52 YB29600CEP 16.00

1Z\v 0.30 1 20-001-51 YB31600CEP 16.50





2 x 1 0.65 1 FB60653CGP $99.50

1Z\v 0.64 1 FB64653CGP 99.50

1Z\x 0.72 1 FB67653CGP 99.50

2Z\x x 1 0.93 1 FC00653CGP 122.00

1Z\v 0.79 1 FC01653CGP 122.00

1Z\x 0.92 1 FC03653CGP 122.00

3 x 1Z\x 0.92 1 FC40653CGP 151.50


pl600-2r fitting coupling (r)

PL X� ftG (wrot)Request publication 22.20

PL600-2r fIttING coUPLING (r)


Z\x x C\v 0.06 10 20-024-11 YX87600CET $6.00

1 0.09 5 20-024-13 YK02600CET 7.00

C\v x 1 0.11 10 20-024-26 YA61600CET 7.50


PermaLynx System Products for copper tubing

M = Male R = Reducer RR = Double Reducer

Sec

tIo

N 9

Per

Ma

LyN

X� Sy

Ste

M P

ro

dU

ctS

fo

r c

oP

Per

tU

BIN

G

pl606 45° elbow


PL606 45° eLBow


Z\x 0.05 10 20-004-10 Y004606CEP $5.00

C\v 0.12 10 20-004-20 Y006606CEP 6.50

1 0.20 5 20-004-30 Y010606CEP 11.00

1Z\v 0.31 1 20-004-40 Y012606CEP 16.50

1Z\x 0.44 1 20-004-50 Y014606CEP 27.00

pl606-2 45° fitting elbow


PL606-2 45° fIttING eLBow


Z\x 0.04 10 20-027-10 Y004606CET $4.00

C\v 0.11 10 20-027-20 Y006606CET 5.50

1 0.18 5 20-027-30 Y010606CET 7.50

1Z\v 0.27 1 20-027-40 Y012606CET 14.50

1Z\x 0.38 1 20-027-50 Y014606CET 16.00

pl607 90° elbow


PL607 90° eLBow


Z\x 0.05 10 20-005-10 Y004607CES $5.00

C\v 0.12 10 20-005-20 Y006607CES 6.50

1 0.22 5 20-005-30 Y010607CES 11.00

1Z\v 0.37 1 20-005-40 Y012607CES 18.00

1Z\x 0.55 1 20-005-50 Y014607CES 33.50

133




SectIo

N 9

Per

Ma

LyNX� SyS

teM P

ro

dU

ctS

for

co

PPer

tUB

ING

pl607lt 90° elbow – long radius


PL607Lt 90° eLBow – LoNG radIUS


Z\x 0.09 5 20-029-10 Y004607CEL $11.00

C\v 0.18 10 20-029-20 Y006607CEL 12.00

1 0.32 5 20-029-30 Y010607CEL 15.50

1Z\v 0.48 1 20-029-40 Y012607CEL 18.00

1Z\x 0.73 1 20-029-50 Y014607CEL 24.00

pl607r 90° elbow – short radius (r)


PL607r 90° eLBow – SHort radIUS (r)


C\v x Z\x 0.12 10 20-005-21 YU67607CEP $9.00

pl607-2 90° fitting elbow – short radius


PL607-2 90° fIttING eLBow – SHort radIUS


Z\x 0.05 10 20-028-10 Y004607CET $4.50

C\v 0.11 10 20-028-20 Y006607CET 6.00

1 0.20 5 20-028-30 Y010607CET 8.00

1Z\v 0.34 1 20-028-40 Y012607CET 11.00

1Z\x 0.49 1 20-028-50 Y014607CET 17.00




Sec

tIo

N 9

Per

Ma

LyN

X� Sy

Ste

M P

ro

dU

ctS

fo

r c

oP

Per

tU

BIN

G

pl611 tee

PL X� PL X� PL (wrot)Request publication 22.20

PL611 tee


Z\x 0.09 10 20-006-10 Y004611CEP $7.50

C\v 0.20 10 20-006-20 Y006611CEP 9.00

1 0.36 5 20-006-30 Y010611CEP 16.00

1Z\v 0.54 1 20-006-40 Y012611CEP 22.00

1Z\x 0.78 1 20-006-50 Y014611CEP 40.00

pl611Bh Bullhead tee


PL611BH BULLHead tee

Size Inches Wgt Lbs Bag Qty. Product # Part Code List Price

Z\x x Z\x x C\v 0.12 10 20-006-12 YAK9611CEP $13.50

C\v x C\v x 1 0.24 5 20-006-22 YA60611CEP 20.50

pl611r tee (r)


PL611r tee (r)


C\v x C\v x Z\x 0.16 10 20-006-23 YT13611CEP $11.50

1 x 1 x Z\x 0.30 5 20-006-34 YK46611CEP 14.00

C\v 0.34 5 20-006-33 YA84611CEP 15.00

1Z\v x 1Z\v x Z\x 0.40 1 20-006-45 YB09611CEP 19.00

C\v 0.43 1 20-006-44 YB10611CEP 20.00

1 0.44 1 20-006-43 YB11611CEP 22.50

1Z\x x 1Z\x x Z\x 0.47 1 20-006-56 YS31611CEP 35.00

C\v 0.55 1 20-006-55 YB36611CEP 36.00

1 0.63 1 20-006-54 YB37611CEP 36.00

1Z\v 0.75 1 20-006-53 YB39611CEP 37.50

135




SectIo

N 9

Per

Ma

LyNX� SyS

teM P

ro

dU

ctS

for

co

PPer

tUB

ING





2 x C\v 0.84 1 FB72627CGP $163.00

1 0.96 1 FB73627CGP 163.00

1Z\v 1.04 1 FB75627CGP 163.00

1Z\x 1.14 1 FB76627CGP 163.00

2Z\x x C\v 1.26 1 FC14627CGP 208.00

1 1.32 1 FC15627CGP 203.00

1Z\v 1.42 1 FC16627CGP 203.00

1Z\x 1.59 1 FC17627CGP 203.00

3 x C\v 1.54 1 FC60627CGP 346.50

1 1.60 1 FC62627CGP 346.50

1Z\v 1.93 1 FC63627CGP 346.50

1Z\x 2.01 1 FC64627CGP 346.50

4 x C\v 2.95 1 FD66627CGP 445.00

1 3.01 1 FD67627CGP 538.00

1Z\v 3.22 1 FD69627CGP 538.00

1Z\x 3.43 1 FD72627CGP 538.00


pl611rr tee (rr)


PL611rr tee (rr)


C\v x Z\x x Z\x 0.15 10 20-006-25 YAL0611CEP $10.50

C\v 0.20 10 20-006-24 YY14611CEP 11.00

pl617 cap

PL (wrot)Request publication 22.20

PL617 caP


Z\x 0.03 10 20-007-10 Y004617CE0 $5.00

C\v 0.06 10 20-007-20 Y006617CEO 8.00

1 0.10 5 20-007-30 Y010617CEO 12.00

1Z\v 0.13 1 20-007-40 Y012617CEO 14.50

1Z\x 0.20 1 20-007-50 Y014617CEO 20.50




Sec

tIo

N 9

Per

Ma

LyN

X� Sy

Ste

M P

ro

dU

ctS

fo

r c

oP

Per

tU

BIN

G

pl707-5 90° drop elbow

PL X� PL (caSt)Request publication 22.20

PL707-5 90° droP eLBow


Z\x 0.19 5 21-031-10 Y004707CEP $15.50

pl707-5s 90° drop elbow stubout

PL X� StUB (caSt)Request publication 22.20

PL707-5S 90° droP eLBow StUBoUt


Z\x 0.31 5 21-033-10 Y004707DES $18.00

pl733 union

PL X� PL (caSt)Request publication 22.20

PL733 UNIoN


Z\x 0.27 5 21-012-10 Y004733CEP $33.50

C\v 0.42 5 21-012-20 Y006733CEP 43.00

1 0.71 5 21-012-30 Y010733CEP 45.50

1Z\v 0.98 1 21-012-40 Y012733CEP 53.00

1Z\x 1.35 1 21-012-50 Y014733CEP 71.50

137




SectIo

N 9

Per

Ma

LyNX� SyS

teM P

ro

dU

ctS

for

co

PPer

tUB

ING

pl603 coupling

PL X� f (wrot)Request publication 22.20

PL603 coUPLING


Z\x 0.11 10 20-002-10 Y004603CEF $7.50

C\v 0.23 10 20-002-20 Y006603CEF 8.00

1 0.37 5 20-002-30 Y010603CEF 13.00

1Z\v 0.55 1 20-002-40 Y012603CEF 23.00

1Z\x 0.72 1 20-002-50 Y014603CEF 33.00

pl603r coupling (r)

PL X� f (wrot)Request publication 22.20

PL603r coUPLING (r)


Z\x x C\v 0.18 5 20-002-11 YX87603CEF $8.50

C\v x Z\x 0.20 10 20-002-21 YU67603CEF 8.00

1 x C\v 0.34 1 20-002-31 YA83603CEF 18.00

pl604 coupling

PL X� M (wrot)Request publication 22.20

PL604 coUPLING


Z\x 0.11 10 20-003-10 Y004604CEM $6.00

C\v 0.23 10 20-003-20 Y006604CEM 8.00

1 0.36 5 20-003-30 Y010604CEM 11.50

1Z\v 0.56 1 20-003-40 Y012604CEM 20.50

1Z\x 0.73 1 20-003-50 Y014604CEM 28.50

pl604r coupling (r)

PL X� M (wrot)Request publication 22.20

PL604r coUPLING (r)


Z\x x C\v 0.17 10 20-003-11 YX87604CEM $7.00

C\v x Z\x 0.19 10 20-003-21 YU67604CEM 8.50




Sec

tIo

N 9

Per

Ma

LyN

X� Sy

Ste

M P

ro

dU

ctS

fo

r c

oP

Per

tU

BIN

G

pl707-3 90° elbow

PL X� f (caSt)Request publication 22.20

PL707-3 90° eLBow


Z\x 0.18 5 21-008-10 Y004707CEF $12.00

C\v 0.33 5 21-008-20 Y006707CEF 14.00

1 0.61 1 21-008-30 Y010707CEF 20.00

pl707-3-5 90° drop elbow


PL707-3-5 90° droP eLBow


Z\x 0.21 5 21-009-10 Y004707DEF $13.00

C\v 0.39 5 21-009-20 Y006707DEF 23.00

pl707-4 90° elbow

PL X� M (caSt)Request publication 22.20

PL707-4 90° eLBow


Z\x 0.18 5 21-010-10 Y004707CEM $13.00

C\v 0.34 5 21-010-20 Y006707CEM 20.00

1 0.58 1 21-010-30 Y010707CEM 30.00

139




SectIo

N 9

Per

Ma

LyNX� SyS

teM P

ro

dU

ctS

for

co

PPer

tUB

ING

pl712 tee

PL X� PL X� f (caSt)Request publication 22.20

PL712 tee


Z\x 0.22 5 21-011-10 Y004712CEF $15.00

C\v 0.51 5 21-011-20 Y006712CEF 18.50

1 0.84 1 21-011-30 Y010712CEF 26.00

pl733-3 union


PL733-3 UNIoN


Z\x 0.31 5 21-016-10 Y004733CEF $23.50

C\v 0.52 5 21-016-20 Y006733CEF 34.50

1 0.76 1 21-016-30 Y010733CEF 40.00

pl733-4 union

PL X� M (caSt)Request publication 22.20

PL733-4 UNIoN


Z\x 0.32 5 21-018-10 Y004733CEM $22.00

C\v 0.53 5 21-018-20 Y006733CEM 27.00

1 0.83 1 21-018-30 Y010733CEM 31.00

pl771 flange

PL X� fLaNGe (caSt)Request publication 22.20

PL771 fLaNGe


1 1.75 1 21-030-30 Y010771CEO $37.00

1Z\v 2.10 1 21-030-40 Y012771CEO 43.00

1Z\x 2.88 1 21-030-50 Y014771CEO 44.00




Sec

tIo

N 9

Per

Ma

LyN

X� Sy

Ste

M P

ro

dU

ctS

fo

r c

oP

Per

tU

BIN

G

pl300-sl Ball Valve – standard lever handle

PL X� PLRequest publication 22.20

PL300-SL BaLL vaLve – StaNdard Lever HaNdLe


Z\x 0.53 1 25-310-10 Y004300CEL $26.50

C\v 0.92 1 25-310-20 Y006300CEL 31.50

1 1.44 1 25-310-30 Y010300CEL 43.50

1Z\v 2.09 1 25-310-40 Y012300CEL 69.00

1Z\x 3.29 1 25-310-50 Y014300CEL 80.50


pl510 check Valve

PL X� PLRequest publication 22.20

PL510 cHeck vaLve


Z\x 0.97 1 25-204-10 Y004510CEP $53.00

C\v 1.39 1 25-204-20 Y006510CEP 55.50

1 2.27 1 25-204-30 Y010510CEP 79.50

1Z\v 3.20 1 25-204-40 Y012510CEP 100.50

1Z\x 4.55 1 25-204-50 Y014510CEP 114.50

pl7120 supply stop Valve (straight) – Quarter turn handle

PL X� coMPreSSIoNRequest publication 22.20

PL7120 SUPPLy StoP vaLve (StraIGHt) – QUarter tUrN HaNdLe

Size Inches Wgt. Lbs Bag. Qty. Product # Part Code List Price

Z\x x C\, x 4 0.31 1 25-190-10 Y004712CES $20.50

141




SectIo

N 9

Per

Ma

LyNX� SyS

teM P

ro

dU

ctS

for

co

PPer

tUB

ING

pl7125 supply stop Valve (angled) – Quarter turn handle

PL X� coMPreSSIoNRequest publication 22.20

PL7125 SUPPLy StoP vaLve (aNGLed) – QUarter tUrN HaNdLe


Z\x x C\, x 4 0.33 1 25-100-10 Y004712CEA $20.50

pl-prep-s power drive small chamfer & deburr tool

Z\x X� 1”Request publication 22.20

PL-PreP-S Power drIve SMaLL cHaMfer & deBUrr tooL


Z\x– 1 0.53 1 22-414-40 Y000414SML $108.00

pl-prep-l power drive large chamfer & deburr tool

1Z\x X� 1Z\x”Request publication 22.20

PL-PreP-L Power drIve LarGe cHaMfer & deBUrr tooL


Z\x– 1Z\x 1.07 1 22-414-60 Y000414LGE $121.00




Sec

tIo

N 9

Per

Ma

LyN

X� Sy

Ste

M P

ro

dU

ctS

fo

r c

oP

Per

tU

BIN

G

pl-prepmaX-s drill compatible small chamfer & deburr tool

Z\x X� 1”Request publication 22.20

PL-PrePMaX�-S drILL coMPatIBLe SMaLL cHaMfer & deBUrr tooL


Z\x– 1 0.534 1 22-414-70 Y000414SMX $94.00

pl-prepmaX-l drill compatible large chamfer & deburr tool

1Z\v X� 1Z\x”Request publication 22.20

PL-PrePMaX�-L drILL coMPatIBLe LarGe cHaMfer & deBUrr tooL


1Z\v– 1Z\x 1.07 1 22-414-80 Y000414LGX $156.50

143




SectIo

N 9

Per

Ma

LyNX� SyS

teM P

ro

dU

ctS

for

co

PPer

tUB

ING


aluminum Products


aluminum coupling

StyLeS 77a aNd 78a

StyLe 77a

StyLe 78a

Aluminum couplings and fittings available. Refer to publication 21.03 for technical information. Contact Victaulic for product availability and pricing.

aluminum fittings

No. 10a eLBow No. 20a tee


Products for Grooved aluminum Pipe Se

ctI

oN

10

Pr

od

Uc

tS f

or

Gr

oo

ved

aLU

MIN

UM

PIP

e

Stainless Steel Products


ductile iron galvanized coupling for stainless steel couplingsFor Gasket Selection Guide, please refer to page 9 or publication 05.01.

rigid coupling



PIPE Inches

Aprx. Wgt. Ea. Price Each PLATED BOLT & NUT

Nominal Size

Outside Dia. Lbs

COUPLING COMPLETE † Galvanized

With Grade “E” or “T”

Gasket



FlushSeal Gasket No.

Size § Inches

2 2.375 3.3 $48.00 $67.00 2 B\, x 2C\v

2Z\x 2.875 4.0 57.00 81.00 2 B\, x 3Z\x

3 3.500 4.6 64.00 85.50 2 B\, x 3Z\x

4 4.500 8.2 89.50 122.00 2 C\v x 4Z\v

5 6.625 16.0 154.00 226.50 2 M\, x 5Z\x

6 6.625 16.0 154.00 226.50 2 M\, x 5Z\x

8 8.625 26.3 248.00 308.00 2 1 x 5Z\x

10 10.750 32.8 436.50 514.00 2 1 x 6Z\x

12 12.750 42.1 507.50 603.00 2 1 x 6Z\x


Note: Painted Style 89 couplings available upon request. Contact our Engineered Product Group for details.



rigid coupling

(for StaINLeSS SteeL PIPe) StyLe w89Request publication 20.15.


PIPE Inches

Aprx. Wgt.Ea. Price Each PLATED BOLT & NUT

Nominal Size

Outside Dia. Lbs



FlushSeal Gasket


With Grade “L” FlushSeal

Gasket No.Size § Inches

14 14.000 69.0 $658.00 $1477.50 2 1Z\, x 5Z\x

16 16.000 83.0 858.50 1689.50 2 1Z\, x 5Z\x

18 18.000 95.0 993.00 1824.00 2 1Z\, x 5Z\x

20 20.000 110.0 1180.50 1975.00 2 1Z\, x 5Z\x

24 24.000 190.0 1743.50 2393.50 2 1Z\, x 5Z\x




rwX� roLLS for aGS LIGHtwaLL StaINLeSS SteeL PIPe

Tool Model

Part Number

Pipe Size Range

Rental Per Month §

Purchase List Price Each Set *

VE416FSVE416FSDVE414MC

RWX1416016 14 - 16”$93.50

$2819.00

VE436MC RWX1436024 14 - 24” 2697.50

§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL.* Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.


Products for Grooved Stainless Steel PipeSe

ctI

oN

11

Pr

od

Uc

tS f

or

Gr

oo

ved

Sta

INLe

SS

Ste

eL P

IPe

stainless steel couplingsNOTE: For 1/2 – 2” stainless steel pipe refer to Section 6 Pressfit®– Vic-Press Type 304 and Pressfit Type 316 Stainless Products.

rigid coupling

StyLe 489 cf8MRequest publication 17.25.

1Z\x– 4”

6 – 12”


PIPE Inches

Aprx. Weight Ea. Price Each

STAINLESS STEEL BOLT & NUT

Nominal Size Outside Dia. Lbs


Gasket

COUPLING COMPLETE † With Grade “E” or “T” FlushSeal

Gasket No.Size § Inches Price Each

1Z\x 1.900 1.6 $159.00 $180.00 2 C\, x 2Z\x $8.00

2 2.375 1.6 178.50 207.50 2 C\, x 2Z\x 8.00

2Z\x 2.875 1.9 195.50 222.00 2 C\, x 2Z\x 8.00

3 3.500 2.8 219.00 244.00 2 Z\x x 2C\v 19.00

4 4.500 4.0 275.50 312.00 2 Z\x x 2C\v 19.00

6 6.625 14.5 638.00 720.00 2 M\, x 5Z\x 157.00

8 8.625 22.8 1331.50 1399.50 2 1 x 5Z\x 229.00

10 10.750 28.4 1568.50 1656.50 2 1 x 6Z\x 231.50

12 12.750 36.6 2208.00 2315.50 2 1 x 6Z\x 231.50




flexible coupling

StyLe 475 cf8M (forMerLy NaMed StyLe 471)Request publication 17.14.


Nominal Size



Inches Lbs

COUPLING COMPLETE


Gasket

COUPLING COMPLETE


FlushSeal Gasket No.

Size Inches Price Each

1 1.6 $122.00 $146.00 2 C\, x 2 $9.00

1Z\v 2.4 142.50 163.50 2 C\, x 2 9.00

1Z\x 2.6 159.00 179.50 2 C\, x 2 9.00

2 1.7 178.50 207.50 2 C\, x 2 9.00

2Z\x 1.9 195.50 222.00 2 C\, x 2 9.00

3 2.8 219.00 244.00 2 Z\x x 2C\v 19.00

4 4.0 275.50 312.00 2 Z\x x 2C\v 19.00




149

Products for Grooved Stainless Steel Pipe


SectIo

N 11

Pr

od

Uc

tS fo

r G

ro

oved

Sta

INLe

SS

SteeL PIP

e

flexible coupling

StyLe 77-SRequest publication 17.03.

StyLe 77-S – Grade “e” or “t” GaSket or fLUSHSeaL GaSket

PIPE Inches Aprx. Wgt. Each Price Each


Nominal Size



Gasket

COUPLING COMPLETE † With Grade “E” or “T” FlushSeal

Gasket No.Size

Inches Price Each

C\v 1.050 1.2 $264.00 $285.50 2 C\, x 2 $55.00

1 1.315 1.6 277.50 299.00 2 C\, x 2 55.00

1Z\v 1.660 2.4 309.50 332.50 2 C\, x 2 55.00

1Z\x 1.900 2.6 289.50 311.00 2 C\, x 2 55.00

2 * 2.375 3.0 358.50 381.00 2 C\, x 2 55.00

2Z\x * 2.875 3.1 367.00 395.50 2 C\, x 2 55.00

3 * 3.500 4.7 390.00 416.50 2 Z\x x 2C\v 78.50

4 * 4.500 6.8 579.50 617.50 2 Z\x x 2C\v 78.50

6 6.625 8.5 966.00 1051.00 2 B\, x 3Z\v 111.00

8 8.625 26.0 1892.50 1963.50 2 M\, x 5 175.00

10 10.750 35.0 2220.00 2312.00 2 1 x 6 184.00

12 12.750 39.0 3053.50 3165.50 2 1 x 6Z\x 228.00

14 14.000 46.0 3352.00 3436.00 2 1 x 6Z\x 244.50

16 16.000 53.0 5057.00 5173.50 4 1 x 5Z\x +

18 18.000 62.0 5128.50 5382.50 4 1 x 5Z\x +




* CE8MN (Duplex)

stainless steel Vic-flange adapter


StyLe 441 – StaINLeSS SteeL vIc-fLaNGe adaPterS

PIPE Inches

Aprx. Weight Each

Lbs Price Each

2 3.0 $176.00

2Z\x 4.3 212.00

3 4.8 233.50

4 6.9 307.00

6 9.5 387.00

For spare parts see page 22.

stainless steel flange adapter

No. 45S

No. 45S – StaINLeSS SteeL fLaNGe adaPter

Nominal Size Inches

Aprx. Weight Each

LbsEnd to End

InchesPrice Each Type 304L

Price Each Type 316L

6 20.1 6.0 + +

8 31.1 6.0 + +

10 44.6 8.0 + +

12 66.0 8.0 + +





ctI

oN

11

Pr

od

Uc

tS f

or

Gr

oo

ved

Sta

INLe

SS

Ste

eL P

IPe

standard schedule 10s, type 304l and type 316l stainless steel fittingsStainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery.

long radius 90° elbowsRequest publication 17.16.

No. 410-SS

90° LoNG radIUS eLBowS

Nominal Size Style

Aprx. Weight Each Center to End Price Each

Inches Number Lbs Inches Type 304L Type 316L

1 No. 410-SS 0.8 2.88 N/A $100.00

1Z\v No. 410-SS 1.0 3.13 N/A 101.00

1Z\x No. 410-SS 1.3 3.50 N/A 101.50

2 No. 410-SS 2.2 4.50 N/A 114.00

2Z\x No. 410-SS 3.3 5.00 N/A 155.00

3 No. 410-SS 2.6 4.50 $149.50 185.50

4 No. 410-SS 4.4 6.00 213.50 266.00

6 No. 410-SS 11.0 9.00 564.50 704.50

8 No. 410-SS 21.2 12.00 981.50 1225.50

10 No. 410-SS 36.6 15.00 1938.00 2422.00

12 No. 410-SS 56.9 18.00 3038.00 3796.50


Note: 1 – 2Z\x” available as Type 316 stainless only.

long radius 45° elbowsRequest publication 17.16.

No. 411-SS

45° LoNG radIUS eLBowS

Nominal Size Style



1 No. 411-SS 0.7 2.00 N/A $90.00

1Z\v No. 411-SS 0.7 2.00 N/A 91.00

1Z\x No. 411-SS 1.0 2.19 N/A 92.50

2 No. 411-SS 1.6 2.75 N/A 101.50

2Z\x No. 411-SS 2.1 2.81 N/A 134.50

3 No. 411-SS 1.3 2.00 $137.50 171.00

4 No. 411-SS 2.2 2.50 197.00 245.50

6 No. 411-SS 5.5 3.75 373.00 465.50

8 No. 411-SS 11.0 5.00 637.00 797.00

10 No. 411-SS 18.5 6.25 1492.00 1744.50

12 No. 411-SS 28.4 7.50 2059.00 2574.00



151



SectIo

N 11

Pr

od

Uc

tS fo

r G

ro

oved

Sta

INLe

SS

SteeL PIP

e

tees

Segmentally welded – not a CR class fitting)Request publication 17.04 and 17.16.

No. 420-SS & No. 20-SS

teeS

Nominal Size Style



1 No.20-SS 1.2 2.25 $299.00 $311.00

1Z\v No.20-SS 1.6 3.38 351.00 +

1Z\x No. 420-SS 2.1 3.38 N/A 291.50

2 No. 420-SS 2.2 2.75 N/A 304.50

2Z\x No. 420-SS 3.3 3.07 N/A 371.00

3 No. 420-SS 3.1 3.77 385.00 481.00

4 No. 420-SS 4.9 4.47 411.50 515.50

6 No. 420-SS 11.7 5.91 802.50 1125.50

8 No. 420-SS 20.3 7.79 1185.00 2093.00

10 No. 420-SS 34.4 8.89 2318.50 5347.50

12 No. 420-SS 52.5 10.39 3494.00 6817.00



concentric reducers

ScHedULe 10S 304/316Request publication 17.04 and 17.16.

No. 50-SSLt & No. 450-SS

coNceNtrIc redUcerS

Nominal Size Style

Aprx. Weight Each End to End Price Each


1Z\x x C\v No. 50-SSLT 1.3 3.75 $239.00 $513.50

1 No. 50-SSLT 1.4 3.75 185.00 216.00

1Z\v No. 50-SSLT 1.5 3.75 206.00 225.00

2 x C\v No. 50-SSLT 2.0 3.75 273.00 380.00

1 No. 50-SSLT 2.1 3.75 150.00 177.50

1Z\v No. 50-SSLT 2.3 3.75 418.00 528.50

1Z\x No. 450-SS 2.5 5.00 N/A 204.50

2Z\x x 1 No. 50-SSLT 2.8 5.00 546.00 632.50

1Z\x No. 50-SSLT 3.0 5.00 404.00 432.50

2 No. 450-SS 1.1 5.00 N/A 256.00

3 x 1 No. 50-SSLT 4.0 5.00 431.00 562.50

1Z\v No. 50-SSLT 4.1 5.00 620.00 +

1Z\x No. 50-SSLT 4.2 5.00 421.50 503.00

2 No. 50-SSLT 4.3 5.00 134.00 198.00

2Z\x No. 450-SS 1.5 5.00 109.50 136.50

4 x 2 No. 50-SSLT 4.8 5.00 179.00 313.00

2Z\x No. 50-SSLT 5.8 5.00 245.50 462.00

3 No. 450-SS 2.0 5.00 126.50 158.00

6 x 2Z\x No. 50-SSLT 6.8 15.00 2065.50 2611.50

3 No. 450-SS 6.9 5.50 411.50 514.00

4 No. 450-SS 7.0 5.50 313.00 390.00

8 x 4 (sw) No. 450-SS 4.2 6.00 1503.00 1879.00

6 No. 450-SS 7.0 6.00 788.00 984.00

10 x 6 (sw) No. 450-SS 18.0 7.00 1861.50 2327.00

8 (sw) No. 450-SS 19.6 7.00 2079.50 2599.50

12 x 8 (sw) No. 450-SS 26.4 14.00 2833.00 3541.50

10 (sw) No. 450-SS 28.4 14.00 2603.50 3253.50


(sw) Segmentally welded, not CR class fitting. Exception is 8 x 4” reducers which are CR class.



ctI

oN

11

Pr

od

Uc

tS f

or

Gr

oo

ved

Sta

INLe

SS

Ste

eL P

IPe

eccentric reducers

ScHedULe 10S 304/316 *Request publication 17.04 and 17.16.

No. 51-SSLt

ecceNtrIc redUcerS

Nominal Size Style

Aprx. Weight Each End to End Price Each


1Z\x x C\v No. 51-SSLT 1.3 3.75 $986.00 +

1 No. 51-SSLT 1.4 3.75 405.50 $467.00

2 x 1 No. 51-SSLT 2.1 3.75 733.50 813.50

1Z\v No. 51-SSLT 2.3 3.75 875.00 934.00

1Z\x No. 51-SSLT 2.5 3.75 461.00 528.50

2Z\x x 2 No. 51-SSLT 3.5 5.00 561.00 684.50

3 x 2 No. 51-SSLT 4.3 5.00 567.50 618.00

2Z\x No. 51-SSLT 4.5 5.00 577.00 663.00

4 x 2 No. 51-SSLT 4.8 5.00 1520.50 +

2Z\x No. 51-SSLT 5.8 5.00 708.00 1203.00

3 No. 51-SSLT 5.9 5.00 1179.50 1473.00

6 x 4 No. 51-SSLT 7.0 9.00 1244.50 1821.50

8 x 4 (sw) No. 51-SSLT 6.5 12.00 3590.50 5574.00

6 No. 51-SSLT 7.0 8.00 1720.00 1733.50

10 x 6 (sw) No. 51-SSLT 18.0 13.00 4764.00 7094.00

8 (sw) No. 51-SSLT 19.6 13.00 4080.50 6321.50

12 x 8 (sw) No. 51-SSLT 26.4 14.00 6508.50 8240.50

10 (sw) No. 51-SSLT 28.4 14.00 5562.00 7244.50



(sw) Segmentally welded, not CR class fitting. Exception is 8 x 4” reducers which are CR class.

153



SectIo

N 11

Pr

od

Uc

tS fo

r G

ro

oved

Sta

INLe

SS

SteeL PIP

e

reducing tee

ScHedULe 10S 304/316 * SeGMeNtaLLy weLded – Not a cr cLaSS fIttING.Request publication 17.04 and 17.16.

No. 25-SS SSw & No. 425-SS

redUcING teeS

Nominal Size StyleAprx.

Weight EachCenter to End Run

Center to End Branch Price Each

Inches Number Lbs Inches Inches Type 304L Type 316L

1Z\x x 1Z\x x C\v No. 25-SS SW 1.3 2.75 2.75 $257.00 $374.50

1 No. 25-SS SW 1.4 2.75 2.75 263.00 322.00

1Z\v No. 25-SS SW 1.5 2.75 2.75 268.50 330.00

2 x 2 x C\v No. 25-SS SW 2.0 3.25 3.25 276.50 340.00

1 No. 25-SS SW 2.1 3.25 3.25 283.00 333.50

1Z\v No. 25-SS SW 2.3 3.25 3.25 318.00 433.00

1Z\x No. 25-SS 2.4 2.75 2.75 359.00 433.00

2Z\x x 2Z\x x C\v No. 25-SS SW 2.8 3.75 3.75 326.50 +

1 No. 25-SS SW 3.0 3.75 3.75 360.00 442.50

1Z\x No. 25-SS SW 3.5 3.75 3.75 407.00 445.00

2 No. 425-SS 2.4 3.07 3.07 N/A 438.00

3 x 3 x C\v No. 25-SS SW 4.0 4.25 4.25 324.50 389.50

1 No. 25-SS SW 4.1 4.25 4.25 360.50 413.50

1Z\v No. 25-SS SW 4.2 4.25 4.25 427.50 510.00

1Z\x No. 25-SS SW 4.3 4.25 4.25 445.00 534.50

2 No. 425-SS 2.9 3.77 3.23 476.00 571.00

2Z\x No. 425-SS 3.1 3.77 3.23 458.50 573.00

4 x 4 x 2 No. 25-SS SW 4.4 4.47 3.82 539.50 646.00

2Z\x No. 25-SS SW 5.9 5.00 5.00 + 691.00

3 No. 425-SS 4.9 4.47 3.88 633.50 790.50

6 x 6 x 3 No. 425-SS 8.8 5.91 4.88 817.00 1020.50

4 No. 425-SS 9.5 5.91 5.12 1013.50 1209.50

8 x 8 x 4 No. 425-SS 18.1 7.79 6.31 2388.00 2850.50

6 No. 425-SS 18.5 7.79 6.62 3131.00 3837.50

10 x 10 x 6 No. 425-SS 28.2 8.89 7.70 3820.00 4869.00

8 No. 425-SS 31.3 8.89 8.59 3853.50 4912.00

12 x 12 x 8 No. 425-SS 40.1 10.39 9.51 5506.00 6872.50

10 No. 425-SS 47.6 10.39 9.89 6581.50 8213.50



cap

tyPe 304/316Request publication 17.04 and 17.16.

No. 60-SS fLat

No. 460-SS dISH

caP

Nominal Size No. 60-SS No. 460-SS

Inches

Type 304L Type 316L Type 316L

Aprx. Weight

Each Lbs

Thickness “T”

InchesPrice Each

Aprx. Weight

Each Lbs

Thickness “T”

InchesPrice Each

Aprx. Weight

Each Lbs

Thickness “T”

InchesPrice Each

C\v 0.2 0.813 $122.50 0.1 1.00 $141.50 – – –

1 0.3 0.875 122.50 0.3 1.00 141.50 – – –

1Z\v 0.4 0.875 130.50 0.4 1.00 150.00 – – –

1Z\x 0.5 0.875 136.00 0.5 1.00 156.50 – – –

2 1.3 0.875 187.00 0.7 1.00 215.50 – – –

2Z\x 1.0 0.875 195.00 1.0 1.00 223.50 – – –

3 2.0 0.875 350.50 – – + 1.16 1.03 $271.00

4 * 3.1 2.500 449.00 – – + 1.8 1.22 346.00

6 * 10.0 3.500 535.50 – – + 4.06 1.75 413.00

8 * 14.0 7.000 1265.00 – – + 6.96 2.23 974.50

10 * 30.5 8.000 1739.50 – – + 16.0 2.72 1277.00

12 * 40.0 9.000 2194.00 – – + 24.2 3.27 1485.50



* 4 – 12” No. 60-SS sizes are Schedule 10 dished caps with tangents. Note: 6” and larger flat caps available upon request. Contact Victaulic for details.



ctI

oN

11

Pr

od

Uc

tS f

or

Gr

oo

ved

Sta

INLe

SS

Ste

eL P

IPe

stainless steel Valves for grooved ips ss pipe

series 763 Butterfly ValveRequest publication 17.23.

SerIeS 763 wItH Gear oPerator

SerIeS 763 wItH Lever Lock 10 PoSItIoN HaNdLe

Ordering Information

Product, pressure rating, body material and disc/stem are standard as listed below. Please specify size, seat, and operator when ordering. Seat option adders (Grade “O” and Grade “D”) must be added to the total valve price.

Actuator kits for field mount are available on request.

Fig No. Product Size CodePressure

RatingBody

Material Disc/Stem Seat Operator

V - XXX - 3 - 3 - 3 - Y - ZZ V XXX 300 psi 316 SS 316 SS Y ZZ


BARE VALVES2”

(020)2Z\x”

(024)3”

(030)4”

(040)6”

(060)8”

(080)10”

(100)

V - XXX - 3 - 3 - 3 - Y - ZZ $1383.50 $1416.00 $1625.00 $1854.50 $2868.00 $4172.50 $6913.50

SEAT OPTION ADDER (Y)

1 - EPDM (E) STD STD STD STD STD STD STD

2 - Nitrile (T) STD STD STD STD STD STD STD

3 - Fluoroelastomer (O) POA POA POA POA POA POA POA

D - Lubricated Nitrile (E) POA POA POA POA POA POA POA

VALVE WITH OPERATOR (ZZ) (E & T - For valve with Grade “O” and Grade “D” please add seat option pricing)

DUCTILE LEVER OPERATOR

03 - Lever Lock - 10 Position $1345.50 $1541.00 $1749.50 $1979.00 $3004.50 $4308.50 N/A

ALUMINUM GEAR OPERATOR

20 - Gear Operator $1555.00 $1751.50 $1960.50 $2255.00 $3403.50 $4727.50 $7506.50

21 - Gear Op. with Memory Stop POA POA POA POA POA POA POA

STAINLESS STEEL LEVER OPERATOR

53 - SS Lever Lock - 10 Position POA POA POA POA POA POA POA

54 - SS Lever Lock - Tamper Resistant POA POA POA POA POA POA POA

STAINLESS STEEL GEAR OPERATOR

60 SS Gear Op. $1754.50 $3371.50 $2159.00 $2628.00 $3844.00 $5148.00 POA




NOTES:* Details required with order† For air and gas service only.

TypePressure

Rating Body Material Disc/Stem Seat OperatorInches

mmSize

Code

- - -

V 020024076030040165060080100

3 - 300 psi 3 - 316 stainless steel9 - Special*

3 - 316 stainless steel/ 316 stainless steel9 - Special*

1 - EPDM - "E"2 - Nitrile - “T”3 - Viton - “O”D - Lubricated Nitrile†9 - Special*

00 - Bare03 - Lever lock handle20 - Gear operator21 - Gear operator with memory53 - Stainless steel lever lock handle54 - Tamper-resistant stainless steel handle60 - Stainless steel gear operator99 - Special

2/502½/6576.1 mm3/804/100165.1 mm6/1508/20010/250

V 040 3 3 3 1 03

155

Products for IPS Stainless Steel Pipe


SectIo

N 11

Pr

od

Uc

tS fo

r G

ro

oved

Sta

INLe

SS

SteeL PIP

e


SerIeS 726-SRequest publication 17.22.

Lever HaNdLe

SerIeS 726-S wItH StaINLeSS SteeL Body aNd trIM

Nominal Size Weight Each

Valve Complete With

Tamper Resistant Lock/Seal Option

Valve Complete With

Gear Operator *

Inches Lbs 1226-15 1226-20

1Z\x 4.7 $613.50 $1167.50

2 7.5 721.50 1415.50

2Z\x 11.5 1252.50 1908.50

3 17.3 1684.00 2302.00

8226-15 8226-20

4 44.0 2677.00 3414.50

6 82.0 6430.00 6901.00


* Valve with gear operator requires additonal lead time. Contact Victaulic for details.


Series 726-S valves are available with electric, pneumatic, and hydraulic actuators or chainwheels. Contact Victaulic for details.

B - 020 - 1 2 2 6 - 16

TypeAct.

In./mmSize

CodePressure

Rating Body Ball & Stem Seat Operator

B 014020024030040060

1½/402/502½/653/804/1006/150

1 - 1,000 psi2

8 - 800 psi³2 - 316 Stainless Steel

9 - Special¹

2 - 316 Stainless Steel

9 - Special¹

6 - Reinforced Teflon

9 - Special¹

00 - Bare16 - 2-Position Handle with Tamper- proof Locking Device20 - Gear Operator21 - Gear Operator with Memory22 - Gear Operator with Chain Wheel23 - Gear Operator with AWWA Square Nut29 - Non-standard Gear Operator¹

NOTES:(1) Details required.(2) For sizes 1½ - 3"(3) For sizes 4 - 6"* For ductile iron Series 726, request publication 08.23.

check Valve

SerIeS 712-SRequest publication 17.08.

Series 712-S Swinger check valve is available with Grade “E”, “T” or Fluoroelastomer seat, bumper and bon-net closure gasket. Specify choice on order. Contact Victaulic for details. Swinger check valves are supplied with bonnet cap drilled and tapped with Z\,” NPT pipe plug for chemi-cal injection or other auxillary connections.SerIeS 712-S – wItH 316 StaINLeSS SteeL Body

SizeAprx.

Weight Each Price Each

Inches Lbs

Valve Complete with Grade “E” or “T” Seat & Bonnet Gasket

Valve Complete with Grade “O”

Fluoroelastomer Seat & Bonnet Gasket

2 12.0 $2174.50 $2927.00



Products for IPS Stainless Steel PipeSe

ctI

oN

11

Pr

od

Uc

tS f

or

Gr

oo

ved

Sta

INLe

SS

Ste

eL P

IPe

Large diameter Products


large diameter piping products

depend-o-lok couplings

• provides a reliable, economical alternative to traditional bolted sleeve-type couplings.

• available in a variety of styles to meet specific application requirements, including:

• Bolted Split-Sleeve flexible couplingunrestrained, flexible bottle-tight joints (e x e)

• Bolted Split-Sleeve restrained flexible couplingfully restrained pipe joints without external harnessing (f x f)

• Bolted Split-Sleeve expansion couplingspipe joints that provide for thermal expansion and contraction (f x e)

• d-o-l couplings meet or exceed the design, material and performance standards set forth in aWWa c-219.

master series fluid/airmaster

• designed to provide fully restrained joints for air and fluid-conveying pipelines.

• shouldered couplings that are designed to operate at design pressures of the system.

• meet or exceed the performance standards set forth in aWWa c-606.

expansion Joint • complete line of expansion joints.

• offers solutions for accommodating thermal expansion and contraction of pipelines.

• products include:

• omniflexstainless steel Bellows-type expansion Joints (can also accommodate lateral movement)

• d-o-L Bolted split-sleeve expansion couplings(accommodates expansion/contraction up to 6Z\x”)

• Paragon expansion jointsfabricated mechanical expansion Joints

for more information on the above products, contact the Victaulic customer care center: Phone: 1-800-841-6624


Large diameter Piping ProductsSe

ctI

oN

12

La

rG

e d

IaM

ete

r P

IPIN

G P

ro

dU

ctS

Please provide this completed check sheet to your local Victaulic salesrepresentative or fax it to your local Victaulic branch customer service.

The joining of pipe with a suitable Victaulic Vic-Ring coupling presents individual considerations that require review by a Victaulic Piping System expert who is experienced in special pipe joining applications. For more information please contact Victaulic, or refer to Victaulic Company’s Vic Ring submittals 16.01 and 16.02 available at www.victaulic.com.TO OBTAIN A QUOTE, PLEASE PROVIDE THE INFORMATION REQUESTED BELOW.

CUSTOMER INFORMATION:

APPLICATION DATA:

CONFIGURATION INFORMATION:

Vic-Ring Shouldered Joint Check Sheet

PROJECT NAME: PROJECT LOCATION:

VICTAULIC SALES: BID DATE:

CONTRACTOR: CONTRACT NAME:

PHONE/FAX: EMAIL:

DISTRIBUTOR/FABRICATOR: CONTACT NAME:

PHONE/FAX: EMAIL:

JOINT TYPE: Pipe to Pipe (two Rings required) Pipe to Shoulder (one Ring req.) Pipe to Shoulder Valve (one Ring req.)

NOMINAL PIPE SIZE: ACTUAL PIPE OD: SCHEDULE: WALL THICKNESS:

PIPE MATERIAL: Carbon Steel Ductile Iron - Requires special pipe preparation as well as welding processes. Stainless Steel - Type:

COUPLING BOLTS / NUTS MATERIAL: Zinc Plated Carbon Steel (Std.) 316 Stainless Steel

COUPLING PROTECTIVE COATING: T37H-77 (Standard)

Other (please describe)

Liquid Epoxy (T140)

MEDIA FLUID: WORKING PRESSURE: TEST PRESSURE:

GASKET GRADE: TYPE: Standard TEMPERATURE RANGE: MIN: MAX:

COUPLING: STYLE: SIZE: QTY: (# of Joints)

RINGS: STYLE: SIZE: QTY: (# of Joints)

RING TYPE: WELD DETAIL (if applicable):

PIPE LINING: (if applicable):Lining Material: Thickness: Corrosion and Abrasion: Abrasion Only:

TYPE B TYPE C

TYPE D TYPE E

ABRASIVE SERVICE NON ABRASIVE SERVICE

Galvanized Carbon Steel

EndSeal®

FlushSeal®

159

Large diameter Piping Products


SectIo

N 12

La

rG

e d

IaM

eter

PIPING

Pr

od

Uc

tS

Vic-ring® couplings and adapter rings

Vic-Ring Adapters and Couplings are sold as a joint

Contact Victaulic for pricing. Other types of ring adapters and couplings are available up to 144”. Contact Victaulic for details.

style 22 couplings style 31 couplingswItH tyPe “a” vIc-rING adaPterS wItH tyPe “d” & “e” vIc-rING adaPterS

Request publication 16.02. Request publication 16.03.

tyPe “a” tyPe “d”

Style 22 Couplings with Type “A” Vic-Ring Adapters are available priced on application. Contact Victaulic for details.

tyPe “e”

Style 31 Couplings with Type “D” and “E” Vic-Ring Adapters are available priced on appli-cation. Specifiy Ring Adapter type on order. Contact Victaulic for details.

style 41 couplings style 44 couplingswItH tyPe “d” & “e” vIc-rING adaPterS wItH tyPe “d” & “e” vIc-rING adaPterS

Request publication 16.04. Request publication 16.05.

tyPe “d” tyPe “d”

tyPe “e” tyPe “e”

Style 41 Couplings with Type “D” and “E” Vic-Ring Adapters are available priced on application. Specify Ring Adapter type on order. Contact Victaulic for details.

Style 41 Couplings with Type “D” and “E” Vic-Ring Adapters are available priced on application. Specify Ring Adapter type on order. Contact Victaulic for details.


Large diameter Piping ProductsSe

ctI

oN

12

La

rG

e d

IaM

ete

r P

IPIN

G P

ro

dU

ctS

styles 41/44 couplingswItH tyPe “c” vIc-rING adaPterS

tyPe “c”

Styles 41/44 Couplings with Type “C” Vic-Ring Adapters are available priced on application. Specify Ring Adapter type on order. Contact Victaulic for details.

161

Large diameter Piping Products


SectIo

N 12

La

rG

e d

IaM

eter

PIPING

Pr

od

Uc

tS


Pipe Preparation tools

LeaSe PUrcHaSe aGreeMeNt

Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details.


Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

Vic-easy® roll grooving tools – field portable

Ve12 VE12 is designed for manual grooving of C\v– 2” steel, stainless steel, aluminum and PVC pipe.

Tool Model Part Number

Tool Weight/ Shipping Weight

Lbs.Rental

Per MonthTool

List Price

VE12 R000012VE0 17/20 $578.00 $1326.00

ve12 ratINGS – MaX�IMUM caPacIty †

Pipe Material Pipe Size/Schedule

VE12 C\v 1 1Z\v 1Z\x 2

Steel 5 – 10 5 – 40

Stainless 40S only

Aluminum * 5 – 10 5 – 40

PVC Plastic 40

† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.

* 6061-T4 or 6063-T4 Alloy must be used.

Ve26 s/c/ss/p VE26 is designed for manual grooving of 2 – 6” steel, stainless steel, aluminum, PVC, and copper tube.



Lbs.Rental

Per MonthTool

List Price

VE26S – Steel, Stainless Steel R100026VE0 22/25 $549.00 $1256.50

VE26C – Copper Tube R200026VE0 22/25 549.00 1256.50

VE26SS – Lightwall Stainless Steel R700026VE0 22/25 549.00 1256.50

VE26P – Aluminum and PVC Pipe R750026VE0 22/25 549.00 1256.50



VE26 2 2Z\x 3 3Z\x 4 5 6

VE26S – Steel 5 – 40 5 – 10

VE26S – Stainless 40S Only

VE26C – Copper K, L, M and DWV

VE26P – Aluminum * 5 – 40 5 – 10

VE26P – PVC Plastic 40

VE26SS – Lt. Wall SS 5S – 10S



Ve26/Ve46 power drive kit

Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and improved VE26/VE46 to alternately groove pipe using stationary power drive.



Lbs.Rental

Per MonthTool

List Price

VE26/VE46 Power Drive Kit R075-026-KIT 7/9 N/A $219.00


Pipe Preparation toolsSe

ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


Ve46/p VE46 is designed for manual grooving of 3Z\x– 6” steel, stainless steel, aluminum and PVC.



Lbs.Rental

Per MonthTool

List Price

VE46 – Steel R000046VE0 28/31 $604.00 $1519.50

VE46P – Aluminum and PVC Plastic R200046VE0 28/31 604.00 1519.50



VE46 3Z\x 4 4Z\x 5 6

VE46S – Steel 5 – 40


VE46P – Aluminum * 5 – 40

VE46P – PVC Plastic 40 40 – 80



Ve226 B/s/m/c/Bss/mss/p †

VE226 is designed for use with a standard C\,” square drive for roll feed with operator supplied ratchet wrench to roll groove C\v– 6” steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).



Lbs.Rental

Per Month Tool

List Price ^

VE226B – C\v– 1Z\x”/26 – 48 mm R2022260FS 27/42 $599.00 $1321.00

VE226S – 1Z\v– 6”/42 – 168 mm R2002260FS 27/42 599.00 1321.00

VE226M – 2 – 6”/60 – 168 mm R3002260FS 27/42 599.00 1321.00

VE226C – 2 – 6”/60 – 168 mm R1002260FS 27/42 599.00 1321.00

VE226BSS – C\v– 1Z\x”/26 – 48 mm R00X2260FS 27/42 599.00 1321.00

VE226MSS – 2 – 6”/60 – 168 mm RXM02260FS 27/42 599.00 1321.00

VE226P – 2 – 6” Aluminum and PVC Plastic R6002260FS 27/42 599.00 1321.00

† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.

^ For proper operation, a power drive and pipe stand are required. See page 174 for details.



VE226 C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 4Z\x 5 6

VE226S – Steel 5 – 40 5 – 10


VE226B – Steel 5 – 40

VE226B – Stainless 40S Only

VE226B – Aluminum * 5 – 40

VE226B – PVC Plastic 40 40 – 80

VE226M – Steel 5 – 40 5 – 10

VE226M – Stainless 40S Only

VE226C – Copper K, L, M and DWV

VE226BSS – Lt. Wall SS 5S – 10S

VE226MSS – Lt. Wall SS 5S – 10S

VE226P – Aluminum * 5 – 40 5 – 10

VE226P – PVC Plastic 40 – 80 40



165



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Ve226 power drive kit

Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive.



Lbs.Rental

Per MonthTool

List Price

VE226 Power Drive Kit † R700-226-KIT 75/115 N/A $2149.50

† Drive unit not included.

* Ridgid is a registered trademark of the Ridge Tool Company.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


Vic-easy roll grooving tools – field fabrication

Ve106 groove-n-go VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v– 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v– 3”/25 – 80 mm carbon steel roll sets; 4 – 6”/100 – 150 mm carbon steel rolls are installed.



Lbs.Rental

Per MonthTool

List Price

VE106 Groove-N-Go R000106110 140/200 $690.00 $4165.00



VE106 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6

Steel 5 – 40 Std. Rolls

Stainless 40S Std. Rolls

Lt. Wall SS 5S – 10S RX Rolls*

Copper K, L, M and DWV Copper Rolls


* RX Rolls – “RX” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving lightwall stain-less steel pipe.

ve106 GroovING roLLS *

Pipe Material Part NumberPipe Size

Range

Purchase List Price

Each Set †

Standard

R912106UA6 1Z\v– 6” Upper $131.00

R912106L03 1Z\v– 3” Lower 370.00

R904106L06 4 – 6” Lower 370.00

Copper RR02106006 2 – 6” 518.50

Stainless RX RX12106L06 1Z\v– 6” Lower 409.50

EndSealRZ02106003 1Z\v– 3” Set 542.50

RZ04106006 4 – 6” Set 542.50

Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order on page 193.

167



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Ve272sfs † The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300® Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.

NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.

Requires a VPD752 or Ridgid 300 power drive.



Lbs.Rental

Per MonthTool

List Price

VE272SFS R000272SFS 184/250 $945.00 $5729.50^

Optional Stabilizer (8 – 12” only) R4002720FS – 96.00 1453.00

† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.

^ For proper operation, a power drive and pipe stand are required. See page 174 for details.

ve272SfS ratINGS – MaX�IMUM caPacIty †


VE272SFS C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Steel 5 – 40 Std. Rolls 5 – 20Std. Rolls


Lt. Wall SS 5S – 10S RX Rolls

Aluminum *‡ 5 – 40 RP Rolls 5 – 20RP Rolls

PVC Plastic ‡ 40 ‡§ 40 –80 RP Rolls 40 ‡



§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RR02272L02

‡ Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used.

ve272SfS GroovING roLLS *

Pipe Material

Part Number

Pipe Size Range

Purchase List Price

Each Set †

Standard

R900268001 C\v” $1930.50

R900268002 1 – 1Z\x” 1663.00

R902272003 2 – 3Z\x” 934.00

R904272006 4 – 6” 998.00

R908272012 8 – 12” 1112.50

CopperRR02272006 2 – 6” 1157.50

RR08272008 8” 1626.00

Stainless RX

RX02272003 2 – 3Z\x” 1302.00

RX04272006 4 – 6” 1397.00

RX08272012 8 – 12” 1400.00

Endseal

RZ02272003 2 – 3Z\x” 1520.00

RZ04272006 4 – 6” 1554.00

RZ08272012 8 – 12” 1617.50

PVC/Aluminum

RP02272003 2 – 3Z\x” 1004.00

Contact Victaulic4 – 6” +

8” +





ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


Ve270fsd Completely self-contained unit with integral gear motor, safety guards, safety foot switch and power cord/plug. The VE270FSD uses a 110 power source, with a 220V model optional upon request. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.




LbsRental


VE270FSD R000270FSD 340/410 $1915.00 ^ $9536.50^

Optional stabilizer (8 – 12” only) R400276FSD – 96.00 1499.00

^ For proper operation, a pipe stand is required. See page 180 for details.

ve270fSd ratINGS – MaX�IMUM caPacIty †


VE270FSD C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12





PVC Plastic ‡ 40 ‡§ 40 – 80 RP Rolls 40 ‡



‡ Use RP Rolls.* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.

§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RR02272L02

ve270fSd GroovING roLLS *

Pipe Material

Part Number

Pipe Size Range

Purchase List Price

Each Set †

Standard

R900268001 C\v” $1930.50

R900268002 1 – 1Z\x” 1663.00

R902272003 2 – 3Z\x” 934.00

R904272006 4 – 6” 998.00

R908272012 8 – 12” 1112.50

CopperRR02272006 2 – 6” 1157.50

RR08272008 8” 1626.00

Stainless RX

RX02272003 2 – 3Z\x” 1302.00

RX04272006 4 – 6” 1397.00

RX08272012 8 – 12” 1400.00

Endseal

RZ02272003 2 – 3Z\x” 1520.00

RZ04272006 4 – 6” 1554.00

RZ08272012 8 – 12” 1617.50

PVC/Aluminum

RP02272003 2 – 3Z\x” 1004.00


8” +



169



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Ve416fsd/417fsd § VE416FSD/417FSD tools are completely self-contained units with integral gear motor, safety foot switch and power cord/plug. VE416FSD uses 110V power, while the VE417FSD has a 220V power source. VE416FSD/VE417FSD is supplied complete with 2 – 16” roll sets * (8 – 12” rolls are installed). It is equipped with a pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway.

2 – 12” Original Groove Rolls

14 – 16” AGS Groove Rolls §

NOTE: New tools supplied with AGS roll for 14 – 16”.

* For additional standard rolls and special rolls, see next page.


Tool Weigth/ Shipping Weight

LbsRental

Per MonthTool

List Price

VE416FSD/VE417FSD R000417FSD 340/450 $3477.00 ^ $21977.50^


Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability.

For 14 – 16” product applications requiring the original groove roll sets, please contact Victaulic for ordering information.

ve416fSd/ve417fSd ratINGS – MaX�IMUM caPacIty †

Pipe Material

Pipe Size/Schedule inches/mm

VE416FSD/VE417FSD2

502Z\x65

3 80

4 100

5 125

6 150

8 200

10 250

12 300

14 350

16 400

Steel § 5 – 40 Std. Rolls 10 – Std. Wall OriginalGroove Only

Std. Wall Stainless

Sch. 10 andStd. Wall RW

AGS


AGS Lt. Wall SS 10S RWXRolls #

Aluminum ‡* 5 – 40 RP Rolls5 –Std.

Wall *

PVC Plastic * 40 – 80 RP Rolls 40 *

Copper K, L, M, and DWV Copper Rolls



# Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available.

§ Ve416fs/fsd is designed for occasional field grooving of ags pipe. these tools should not be used for field production grooving. for production grooving capabilities, use either a Ve450fsd or Ve460 tool.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


ve416fSd/ve417fSd GroovING roLLS *

Pipe Material

Part Number

Pipe Size Range

Purchase List Price

Each Set †

Standard

R902416003 2 – 3Z\x” $1434.50

R904416006 4 – 6” 776.00

R908416012 8 – 12” 839.50

R914416016 14 – 16” 817.50

AGS Standard RW RW01416016 14 – 16” 2121.00

CopperRR02416006 2 – 6” 1875.00

RR08416008 8” 1284.00

Endseal

RZ02416003 2 – 3Z\x” 1665.50

RZ04416006 4 – 6” 1133.50

RZ08416012 8 – 12” 1395.50

Plastic Pipe RP02416003 2 – 3Z\x” 2412.50

Stainless RX

RX02416003 2 – 3Z\x” 1701.00

RX04416006 4 – 6” 1117.00

RX08416012 8 – 12” 1179.00

AGS Stainless RWX RWX1416016 14 – 16” 2819.00

PVC/Aluminum

RP02416003 2 – 3Z\x” 2412.50

Contact Victaulic 4 – 6” +

8” +

Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order on page 193.


171



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Ve416fs § VE416FS is provided with a mounting stand for field or shop assembly and set up. The stand and tool must be mounted to a VPD752 or Ridgid 300® 38 rpm power drive before grooving. VE416FS is supplied complete with 2 – 16” roll sets* (8 – 12” rolls are installed, unless otherwise specified). It is equipped with a pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway.


14 – 16” AGS Groove Rolls §

NOTE: New tools supplied with AGS rolls when 14 – 16” roll sets are specified.



LbsRental

Per MonthTool

List Price

VE416FS R0004160FS 240/400 $2583.00 $16331.50^


Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability.

For 14 – 16” product applications requiring the original groove roll sets, please contact Victaulic for ordering information.

ve416fS ratINGS – MaX�IMUM caPacIty †

Pipe Material

Pipe Size/Schedule inches/mm

VE416FS2

502Z\x65

3 80

4 100

5 125

6 150

8 200

10 250

12 300

14 350

16 400

Steel 5 – 40 Std. Rolls 10 – Std. Wall OriginalGroove Only

Std. Wall Stainless

Sch. 10 andStd. Wall RW

AGS


AGS Lt. Wall SS 10S RWXRolls #

Aluminum ‡* 5 – 40 RP Rolls5 –Std.

Wall *


Copper K, L, M, and DWV Copper Rolls




§ Ve416fs/fsd is designed for occasional field grooving of ags pipe. these tools should not be used for field production grooving. for production grooving capabilities, use either a Ve450fsd or Ve460 tool.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


ve416fS GroovING roLLS *

Pipe Material

Part Number

Pipe Size Range

Purchase List Price

Each Set †

Standard

R902416003 2 – 3Z\x” $1434.50

R904416006 4 – 6” 776.00

R908416012 8 – 12” 839.50

R914416016 14 – 16” 817.50


CopperRR02416006 2 – 6” 1875.00

RR08416008 8” 1284.00

Endseal

RZ02416003 2 – 3Z\x” 1665.50

RZ04416006 4 – 6” 1133.50

RZ08416012 8 – 12” 1395.50

Plastic Pipe RP02416003 2 – 3Z\x” 2412.50

Stainless RX

RX02416003 2 – 3Z\x” 1701.00

RX04416006 4 – 6” 1117.00

RX08416012 8 – 12” 1179.00


PVC/Aluminum

RP02416003 2 – 3Z\x” 2412.50


8” +



173



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Ve450fsd VE450FSD is a self-contained unit with two 220 volt, single phase 50/60 hz, 20 amp integral gear motors to handle heavier loads, safety foot switch and power cord/plug. VE450FSD is supplied complete with 4 – 12”/100 – 300 mm original groove roll sets and 14 – 24”/350 – 600 mm AGS groove roll sets.



LbsRental


VE450FSD R000450FSD 825 $3600.00 $28248.00

Optional Rolls: Optional rolls are available for 14 – 24”/350 – 600 mm carbon steel original groove; 4 – 18”/100 – 450 mm lightwall stainless steel original groove; 14 – 24”/350 – 600 mm lightwall stain-less steel AGS groove; and 4 – 12”/100 – 300 mm EndSeal (ES) groove. RP roll sets are also available for roll grooving aluminum and plastic.

Note: VE450FSD is designed for field use only and should not be used for shop production.

ve450fSd ratINGS – MaX�IMUM caPacIty †


VE450FSD 4 5 6 8 10 12 14 16 18 20 22 24

Steel ‡5 – 40 Sch. 5 – Std.

RW–AGS

Stainless40S Std. Rolls Std. Wall, Std. Rolls

Std. Wall, RW–AGS

Lt. Wall SS 5S – 10S RX Rolls@ 5S/10S/10 RX Rolls

AGS Lt. Wall SS 10S RWX Rolls #

Aluminum *‡ 5 – 40 RP Rolls

PVC Plastic * 40 – 80 40




§ EndSeal (ES) rolls are available. Contact Victaulic for details.

@ These rolls are not interchangeable with roll sets from other tool models. Contact Victaulic for ordering information.

ve450fSd GroovING roLLS *

Pipe Material

Part Number

Pipe Size Range

Purchase List Price

Each Set †

Standard

R9Q1448006 4 – 6” $2783.50

R9Q1448012 8 – 12” 3609.50

R9Q1448016 14 – 16” 3369.00

R9Q1448020 18 – 20” 3425.50

R9Q1448024 22 – 24” 3889.00

AGS Standard RW RWQ2448024 14 – 24” 3626.50

Stainless RX

RXQ1448006 4 – 6” 6534.00

RXQ1448012 8 – 12” 5290.50

RXQ1448016 14 – 16” 5272.50

RXQ1448020 18 – 20” 5355.00

RXQ1448024 12 – 24” 5610.50




ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


Vic-easy roll grooving tools – shop fabricationNOTE: All shop models shipped set for 220 power, unless specified otherwise.

Ve268 † Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 – 12” nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 – 12” pipe) * (8 – 12” rolls are installed, unless otherwise speci-fied).


Request RP-268 for power requirements or visit the Victaulic web site.

† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.)



LbsRental

Per MonthTool

List Price

VE268 R000268VE0 735/766 $2261.00 $20420.00^




VE268 C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12





PVC Plastic ‡ 40 ‡§ 40 – 80 RP Rolls 40 ‡




§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Contact Victaulic for details.

175



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS



Pipe Material

Part Number

Pipe Size Range

Purchase List Price

Each Set †

Standard

R900268001 C\v” $1930.50

R900268002 1 – 1Z\x” 1663.00

R902272003 2 – 3Z\x” 934.00

R904272006 4 – 6” 998.00

R908272012 8 – 12” 1112.50

CopperRR02272006 2 – 6” 1157.50

RR08272008 8” 1626.00

Endseal

RZ02272003 2 – 3Z\x” 1520.00

RZ04272006 4 – 6” 1554.00

RZ08272012 8 – 12” 1617.50

Stainless RX

RX02272003 2 – 3Z\x” 1302.00

RX04272006 4 – 6” 1397.00

RX08272012 8 – 12” 1400.00

PVC/Aluminum

RP02272003 2 – 3Z\x” 1004.00


8” +



Ve414mc † Fully-motorized, semi-automatic, hydraulic tool is shipped fully assembled with rolls for standard groov-ing (2 – 16” pipe *). Requires 220/440V, 3 phase, 60 Hz power supply. Safety guard, safety foot switch and instructions are included. Pipe stabilizer for pipe 8” and larger is included, to prevent pipe sway.


14 – 16” AGS Groove Rolls

NOTE: New tools supplied with AGS rolls when 14 – 16” roll sets are specified.

Request RP-414MC for power requirements or visit the Victaulic web site.

† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require differ-ent incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.)

* For additional standard rolls and special rolls, see next page.



LbsRental

Per MonthTool

List Price

VE414MC R000414MC1 735/830 $3460.00 $29388.50^


Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and alumi-num pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm std. wall car-bon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability.

For product applications requiring the original groove roll sets, please contact Victaulic for ordering infor-mation.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


ve414Mc ratINGS – MaX�IMUM caPacIty †


VE414MC2

502Z\x65

3 80

4 100

5 125

6 150

8 200

10 250

12 300

14 350

16 350

Steel 5 – 40 Std. Rolls 10 – Std. Wall Original Groove Only

Std. Wall Stainless

Sch. 10 and Std. Wall RW–

AGS

Lt. Wall SS 5S – 10S RX Rolls 10S RWX–AGS

AGS Lt. Wall SS 10S RWX Rolls #

Aluminum ‡* 5 – 40 RP Rolls5 – S t d . Wall *






ve414Mc GroovING roLLS *

Pipe Material

Part Number

Pipe Size Range

Purchase List Price

Each Set †

Standard

R902416003 2 – 3Z\x” $1434.50

R904416006 4 – 6” 776.00

R908416012 8 – 12” 839.50

R914416016 14 – 16” 817.50


CopperRR02416006 2 – 6” 1875.00

RR08416008 8” 1284.00

Endseal

RZ02416003 2 – 3Z\x” 1665.50

RZ04416006 4 – 6” 1133.50

RZ08416012 8 – 12” 1395.50

PVC RP02416003 2 – 3Z\x” 2412.50

Stainless RX

RX02416003 2 – 3Z\x” 1701.00

RX04416006 4 – 6” 1117.00

RX08416012 8 – 12” 1179.00


PVC/Aluminum

RP02416003 2 – 3Z\x” 2412.50


8” +



177



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Ve460 † Base Tool – Fully-motorized, semi-automatic, hydraulic shop tool is shipped fully assembled with rolls for standard grooving (4 – 24”) .500 wall maximum.

4 – 12” Original Groove System Groove Rolls

14 – 24” AGS Groove Rolls

Requires 220/440/3/60 power supply. All tools are shipped 220 as a standard. Operating instructions included.

Request RP-460 for power requirements or visit the Victaulic web site.

† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amper-age power requirements, refer to RP sheet supplied with tool. Each model may require different incoming

power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)

See kits below for components required to groove above 24”.

Tool Model Part Number Roll Sets Included

Railing and Platfrom Kit

Quantity/

Support Base (Quantity/Part

Number)

Tool Weight/Shipping

Weight Lbs.

Rental Per Month List Price

Recommended Pipe Stand ^

TOOL ONLYVE460 R000460VE0

4 – 6”/100 – 150 mm(R9Q1460006),

8 – 12”/200 – 300 mm(R9Q1460012),

14 – 24”/350 – 600 mm(R9Q1460024) AGS

N/A N/A 1500/1750 $9500.00 $57250.00

VAPS224(R000224PS0)

ORVAPS1672

(R0001672PS)

Optional Kits for Grooving Above 24” ‡

KIT 126 – 36”/

650 – 900 mmLIFTING POINT LIFTING POINT

FRONT

R260460KIT 26 – 36”/650 – 900 mm(RWQ3460038) AGS

1(R550460KIT)

1(R551460PNT) N/A 1675.00 8200.00

VAPS236(R000236PS0)

ORVAPS1672

(R0001672PS)

KIT 240 – 48”/

1000 – 1200 mmLIFTING POINT LIFTING POINT

FRONT

LIFTING POINT LIFTING POINT

FRONT

R400460KIT 40 – 48”/1000 – 1200 mm (RWQ3460048) AGS

1 *(R550460KIT)

2 **(R551460PNT) N/A 1900.00 8400.00 VAPS1672

(R0001672PS)

KIT 350 – 60”/

1250 – 1500 mm


FRONT


FRONT


FRONT

R500460KIT 50 – 60”/1250 – 1500 mm (RWQ3460060) AGS

1 *(R550460KIT)

3 **(R551460PNT) N/A 2125.00 8600.00 VAPS1672

(R0001672PS)

Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC, and aluminum pipe.


‡ Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be ordered individually or as a kit.

* Railing and Platform Kit is required only if preceding kit has not been ordered.

** Only one (1) Support Base is required if preceding kit has been ordered.




ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS




VE4604

1005

1256

1508

20010

25012

30014

35016

40018

45020

50022

55024

60026

65028

70030

75032

80034

85036

90038

95040

100042

105048

120050

125060

1500

Steel 5 – 80 5 – Extra Strong 10 – Extra Strong (.500) ^ AGS Std. (.375 – .500) ^ AGS

Stainless Sch. 40 Only .375 RW AGS

Lt. Wall SS 5S – 10S RX Rolls 5S/10S/10 RWX Rolls

Aluminum # 5 – 40

PVC Plastic 40 – 80 40

Grooving Capabilities for Original Style Groove (OGS) Coupling Styles 07, 77, and 770)

Steel .250 – .500 ^

Stainless Std. (.375)

Lt. Wall SS 5S/10S/10 RX Rolls


‡ Use RP Rolls. * 6061-T4 or 6063-T4 must be used. RP Rolls must be used.

^ Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum.


Pipe Material

Part Number

Pipe Size Range

Purchase List Price Each Set

Steel and Stainless

R9Q1460006 4 – 6” $2700.00

R9Q1460012 8 – 12” 2605.00

RWQ2460024 14 – 24” AGS 2500.00

Lt. Wall Stainless Steel RXRXQ1460006 4 – 6” 5828.00

RXQ1460012 8 – 12” 5166.00

Lt. Wall Stainless Steel RWXRWQX460018 14 – 18” AGS 5253.00

RWQX460024 20 – 24” AGS 5144.00

PVC/AluminumRPQ1460006 4 – 6” 5973.00

RPQ1460012 8 – 12” 5672.00

EndSealRZQ1460006 4 – 6” 5288.00

RZQ1460012 8 – 12” 4455.00

14 – 36” Original Style Groove (OGS) Grooving Rolls For use with Coupling Styles 07, 77, and 770

Steel and Stainless

R9Q1460016 14 – 16” 3282.00

R9Q1460020 18 – 20” 3286.00

R9Q1460024 22 – 24” 3464.00

R9Q1460036 26 – 36” 3298.00

Lt. Wall Stainless Steel RX

RXQ1460016 14 – 16” 4016.00

RXQ1460020 18 – 20” 6212.00

RXQ1460024 22 – 24” 5215.00




179



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Vic-easy tool accessories

Victaulic power drive – Vpd752

Power drive features safety foot switch and bi-directional speed chuck. Z\x horsepower, 15 amp motor operates on standard 120V power source.

VPD753 for single phase, 220V power source also available. Contact Victaulic for pricing.

Capacities: See appropriate tool. †

Optional: Universal Drive Shaft.



LbsRental

Per MonthTool

List Price

Victaulic Power Drive - VPD752 R000752110 140/165 $755.00 $5387.00


Vaps112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-Easy roll grooving tools: VE272SFS, VE268, VE270FSD.

Capacities: 1 – 12” IPS pipe †

Load Rating: 1075 lbs

Vertical Stroke: 14Z\x” for adjusting rod; 8Z\x” leg adjustment; 23” total

Min. Pipe Height from Floor: 23” on 12” pipe; 21” on 1” pipe

Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.



LbsRental

Per MonthTool

List Price

VAPS 112 R000112PS0 190/220 $565.00 $4082.00


Vaps224 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. They are designed for direct use with Vic-Easy roll grooving tools: VE416/FSD, VE414MC, VE436MC, VE460.

Capacities: 2 – 24” IPS pipe †


Vertical Stroke: 21”

Min. Pipe Height from Floor: 14” on 24” IPS pipe

Max. Pipe Height from Floor: 39” on 2” IPS pipe

Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.



LbsRental

Per MonthTool

List Price

VAPS 224 R000224PS0 260/315 $687.00 $6127.00




ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


Vaps1672 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. They are designed for direct use with Vic-Easy roll grooving tools: VE436MC and VE460.

Capacities: 16 – 72” pipe †


Vertical Stroke: 17”

Min. Pipe Height from Floor: 16” on 72” pipe

Max. Pipe Height from Floor: 28” on 16” pipe



Lbs. Rental Per Month List Price

VAPS1672 R0001672PS 480 $4100.00 $14750.00


Ve436mc Quick change slide conversion kit

The VE436MC Quick Change Slide Conversion Kit includes an upper shaft and slide held in place by a detent pin for improved efficiency. The kit also includes 4 – 12”/100 – 300 mm standard groove upper rolls, 14 – 24”/350 – 600 mm AGS groove upper rolls, pipe size, pipe rotation, guard setting labels, and guard setting pads (standard and AGS).

NOTE: Upper rolls only are included with the kit. Lower rolls can be purchased separately. Retain original slide, shaft, set screws and roll grooving assembly for future use.

Conversion Kit Part NumberKit Weight

LbsKit

List Price

VE436MC Quick Change Slide Conversion Kit R150436KIT 106 $6816.00

181



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


cut grooving tools

Vg28gd (gear drive) *

Includes tool set for grooving 4 – 6” standard steel pipe, crate, operating instructions, tool bit removal kit, 10” extension bar, depth stop adjustment tools, and one extra 2 – 3Z\x” and 8” standardgroove steel pipe tool bits.

Capacities: 2 – 8” steel (and other IPS) and 3 – 6” cast and ductile pipe (Additional bits required)



LbsRental

Per MonthTool

List Price

VG28GD (Gear Drive) R000281AVG 37/56 $1583.00 $13093.00

* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule on page 181).

vG28Gd ratINGS


VG28GD2

502Z\x65

3 80

3Z\x90

4 100

5 125

6 150

8 200

Steel 40 – 80 *

Stainless 40 – 80 *

Aluminum 40 – 80 *

Ductile Iron Class 53 Min.

* 6”/150 mm Schedule 8

vG28Gd PartS

Type Pipe

Type Groove

Pipe Size/ Tool Bit Marking

Part Numbers

Purchase Price Each

Steel (Aluminum Stainless and other IPS Metallic)

Standard

2 – 3Z\x” Std. RK02280003 $225.50

4 – 6” Std. RK04280006 225.50

8” Std. RK08280008 225.50

EndSeal

2 – 3Z\x” ES RK02280Z03 225.50

4 – 6” ES RK04280Z06 225.50

8” ES RK08280Z08 225.50

AWWA # Cast and Ductile Iron

Standard (Rigid) 3 – 6” CIR * RK03280G06 440.50

Flexible 3 – 6” CIF RK03280E06 440.50

* Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]).NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe is available.

# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


Vg824 * Includes tool set for grooving 8 – 12” standard steel pipe, crate, operating instructions, tool bit removal kit, wrench and one extra 8 – 24” standard groove steel pipe tool bit.

Capacities: 8 – 24” steel (and other IPS) and 8 – 24” cast and ductile pipe (Additional bits required)

Note: Tools bits and stops for D.I. are optional. See below.



LbsRental

Per MonthTotal

List Price

VG824 R000824AVG 82/126 $2216.00 $24383.00

* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule on page 181).

vG824 ratINGS

Pipe Material Pipe Size/Wall Thickness

VG824 8

20010

25012

30014

35016

40018

45020

50022

55024

600

Steel Sch. 40 – 80 Sch. 30 – Std. Wall

Stainless Sch. 30 – Std. Wall

Aluminum Sch. 30 – Std. Wall


vG824 PartS

Type PipeType

Groove Tool Bit Pipe Stop

Pipe/Size Marking

Part Numbers

Purchase Price Each

Pipe/Size Marking

Part Numbers

Purchase Price Each

Steel (and other IPS Metallic)

Std. 8 – 24” Std. RK08824024 $201.508 – 12” Std. R424824AVG $473.00

14 – 24” Std. R024824AVG 473.00

EndSeal 8 – 12” ES RK08824Z12 267.50 8 – 12” Std. R424824AVG 473.00

AWWA # Cast and Ductile Iron

Std. (Rigid)

8” CIR RK08824G08 267.50 8” CI R524824AVG 473.00

10 – 12” CIR RK10824G12 267.50 10 – 12” CI R024824AVG 473.00

14” CIR RK14824G14 267.50 14” CI R224824AVG 473.00

16 – 24” CIR RK16824G24 267.50 16 – 24” CI R324824AVG 473.00

Flexible8 – 12” CIF RK08824E12 267.50 8” CI R524824AVG 473.00

14 – 24” CIF RK14824E24 267.50 10 – 12” CI R024824AVG 473.00


NOTE: Special urethane covered Idler Roll (Part No. R-201-824-AVG) recommended for grooving glass lined pipe is available. Center adjustable stop (Part. No. R-025-824-AVG) available.

183



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Vg412 orbital grooving tool

Includes riser blocks and grooving heads for cut grooving 4 – 12” ductile iron rigid groove. Power drive supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra charge.

Capacities: 4 – 12” ductile iron pipe

Note: Tools bits and stops for D.I. are optional. See below.



LbsRental


VG412 Orbital Grooving Tool R000412AVG 270/365 $2372.00 $28750.00

IPS Steel kit for cutting and grooving* (recommended only for lined steel pipe) N003412034 – 477.00 4748.50

Optional flexible spacer blocks: 4 – 6” N220412667 – – 167.50

8” N220412668 – – 180.50

10 – 12” N220412669 – – 187.00

* NOTE: Steel grooving kit can only be rented with rental tool.

vG412 ratINGS


VG412 4

1004Z\x120

5 125

6 150

8 200

10 250

12 300

Steel Sch. 40 – 80


vG412 PartS

Type Pipe

Knife Style

Pipe Size Tool Bit Marking

Part Numbers

Purchase Price Each

AWWA Cast and Ductile Iron #

Straight 4 – 6 N220412680 $294.00

Angled 4 – 6 N220412568 294.00

Straight 8 – 12 N220412679 294.00

Angled 8 – 12 N220412569 294.00

Solid Cut–Off Blade N275412055 90.00

Steel (and other IPS Metallic)

Straight 4 – 6 N220412678 230.50

Angled 4 – 6 N220412571 230.50

Angled 8 N220412572 230.50

Straight 8 N220412677 230.50

Angled 10 – 12 N220412570 230.50

Straight 10 – 12 N220412676 230.50

Solid Cut–Off Blade N275412055 90.00




ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


Vg Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are supplied with an extra tool bit and ratchet handle. 2” and larger tools include a power yoke. Power yoke is available for C\v and 1” (Part. No. R0240030VG). 1Z\v and 1Z\x” (Part No. R0240050VG) tools at $137.00 additional.

NOTE: Vic-Groovers not recommended for use with a hand-held power drive.

Pipe Standard or “ES” Tool Complete w/Yoke and Extra Tool Bit *

Size Inches

Outside Diameter

InchesWeight Each

Lbs

VG Tool Part Number Purchase Price EachStandard * ES

C\v 1.050 11.0 R0000030VG – $1182.50

1 1.315 11.0 R0000040VG – 1182.50

1Z\v 1.660 12.0 R0000050VG – 1182.50

1Z\x 1.900 12.0 R0000060VG – 1182.50

2 2.375 12.0 R0000080VG R00E0080VG 1317.50

2Z\x 2.875 16.0 R0000100VG R00E0100VG 1652.00

3 3.500 16.0 R0000120VG R00E0120VG 1700.50

3Z\x 4.000 18.0 R0000140VG – 1852.00

4 4.500 18.0 R0000160VG R00E0160VG 1852.00

5 5.563 25.0 R0000200VG – 2560.00

6 6.625 25.0 R0000240VG R00E0240VG 2560.00

8 8.625 45.0 R0000320VG R00E0320VG 2698.00

* Tools for PVC and Stainless Steel add $23.00 to the standard tool price.

Size Part Number Extra Tool Bit

Inches Standard ES Standard * ES

C\v R0080030VG – $118.00 –

1 R0080030VG – 118.00 –

1Z\v R0080030VG – 118.00 –

1Z\x R0080030VG – 118.00 –

2 R0080030VG R0640080VG 118.00 152.00

2Z\x R0080030VG R0640080VG 118.00 152.00

3 R0080030VG R0640080VG 118.00 152.00

3Z\x R0080140VG – 118.00 +

4 R0080140VG R0640160VG 118.00 162.00

5 R0080200VG – 196.00 +

6 R0080200VG R0640240VG 196.00 216.00

8 R0300320VG R0640320VG 79.00 241.50

* Tool bits for PVC and Stainless Steel add $23.00 to the standard tool bit price.

Size VG Tool for Cast Pipe (Gray and Ductile)

Inches Style OD Weight Part Number Price

3 Rigid 3.960 20.0 R00R015CVG $2726.50

3 Flexible 3.960 20.0 R00F015CVG 2726.50

4 Rigid 4.800 26.0 R00R019CVG 2726.50

4 Flexible 4.800 26.0 R00F019CVG 2726.50

6 Rigid 6.900 27.0 R00R027CVG 2726.50

6 Flexible 6.900 27.0 R00F027CVG 2726.50

8 Rigid 9.050 40.0 R00R036CVG 4295.50

8 Flexible 9.050 40.0 R00F036CVG 4295.50

Size Extra Knife for CI

Inches Style Part Number Price

3 Rigid/Flexible R008015CVG $422.00

4 Rigid/Flexible R008015CVG 422.00



185



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


vG46 ratINGS


VG46 Individual C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8


Stainless Sch. 40 – 80

Aluminum Sch. 40 – 80

PVC Sch. 40 – 80

VG46 Adjustable


Stainless Sch. 40 – 80

Aluminum Sch. 40 – 80

VG46

Ductile Iron Class53 Class 53 Min.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


pipe preparation tool accessories

power mule (external power source)

Electrical motor, gear driven, 2 hp power source for all Victaulic cut grooving tools with 1” drive connec-tion, integral safety foot switch and reversible motor (requires 115/1/60-20 amp circuit*).

Capacities: Victaulic grooving tools as noted.

* 220V optional



LbsRental

Per MonthTool

List Price

Power Mule (External Power Source) R200700MUL 190/205 $2132.00 $13088.00

pt-100-a go/no-go grooved pipe diameter tape

Pocket-sized steel tapes are available for taking circumferential measurements. This diameter tape con-tains Go/No-Go markings on one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and diam-eter markings to 100th of an inch on the other side. Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement.

Tool Model Part Number Purchase Price

PT-100-A Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $47.50

Box of 6 RW75-100-KIT 264.50

NOTICE

• tape contains go/no-go markings on one side for use with C\v– 24”/20 – 600 mm pipe in ansi B36.19 and many iso-4200 sizes and is marked in 1/100th of an inch increments on the other side.

• the go/no-go side can be used to check cut or roll grooved pipe conformance to Victaulic original and machined for rubber lining (mrl) (C\v– 12”/20 – 300 mm) and advanced groove system (ags) (14 – 24”/350 – 600 mm) groove diameter specifications.

• tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement.

• the go/no-go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3; 267.4; and 318.5 mm steel or stainless steel pipe sizes. for cast or ductile iron pipe sizes (up to 20”/500 mm), copper tube sizes, and the steel and stainless steel pipe sizes listed above, use the side of the tape marked in 0.01” increments.

• the go/no-go pipe tape is a quick reference guide only. to ensure proper grooving dimensions, always refer to the i-100 Victaulic field installation handbook or to the latest groove specifica-tions publications located on www.victaulic.com.

tool carry Bag Heavy duty tool carry bag for transporting Vic-Easy Roll Grooving Tools, grooving rolls, and other tools. Carry bag can accommodate up to 50 lbs.



LbsTool

List Price

Tool Carry Bag NM15000002 4/6 $87.00

187



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Vic-adjustable cut grooving tools for pVc plastic pipe

Vpg26 Includes Tool with self-contained grooving motor (115/60) and tool bit for Schedule 40 – 80 PVC, crate, operating instructions and tool bit chuck wrench.

Capacities: 2 – 6” Schedule 40 – 80 PVC and similar plastic pipe only.



LbsRental


VPG26 Cut Grooving Tool R000283VPG 41/46 $1402.00 $7926.00

Extra tool bits for 2 – 3Z\x” standard radius cut grooving R045283VPG – – 302.00

Extra tool bits for 4 – 6” standard radius cut grooving R019283MAC – – 379.00

vPG26 ratINGS – MaX�IMUM caPacIty


VPG262

502Z\x65

3 80

3Z\x90

4 100

4Z\x120

5 125

6 150

PVC 40 – 80 PVC

Vpg824 Includes Tool with self-contained grooving motor (115/50) and tool bit for Schedule 40 – 80 PVC, crate, operating instructions, and tool bit chuck wrench.

Capacities: 8 – 16” Schedule 40 – 80 PVC and similar plastic pipe only



LbsRental

Per Month List price

VPG824 Cut Grooving Tool R000826VPG 47/53 $2292.00 $14083.00

Extra tool bits for 8 – 16” standard plastic radius cut grooving R023826MAC – – 418.00

vPG824 ratINGS – MaX�IMUM caPacIty


VPG824 8 10 12 14 16

PVC 40 – 80 PVC



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


hole cutting tools

Vhct900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option)

Capacities: 1 – 3Z\x” holes for Z\x– 3” Mechanical-T, Vic-Let connections.


Tool Weight/ Shipping Weight/

LbsRental

Per MonthTool

List Price

VHCT900 R000900HCT 36/61 $1227.00 $3761.50

The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.

hct908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and stainless steel pipe. This allows for use of Mechanical-T®, Vic-Let®, Vic-O-Well and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate.

Capacities: 1 – 4Z\x” holes for Z\x– 4” Mechanical-T, Vic-Let connections.



LbsRental

Per MonthTool

List Price

HCT908 R000908HCT 35/48 $507.00 $2295.00

The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.

accessories Saw Diameter Inches Part Number

Purchase List Price Each

1 N-M18-000-011 $72.00

1Z\v N-M18-000-016 72.00

1Z\x N-M18-000-021 72.00

1C\v N-M18-000-026 72.00

2 N-M18-000-031 72.00

2C\, N-M18-000-036 81.00

2Z\x N-M18-000-037 81.00

2C\v N-M18-000-040 81.00

3Z\x N-M18-000-047 81.00

4Z\x N-M18-000-050 81.00

Part Name Part NumberPurchase List Price

Arbor (Mandrel) R-400-900-HCT $197.50

Arbor (1” saw only) R-450-900-HCT 281.00

Coupon Retaining Pilot Drill R-402-900-HCT 83.00

Chuck Key Assembly R-314-900-HCT 88.50

Levels N-M14-000-006 53.50

Coupon Remover Assembly R-050-900-HCT 40.50

Long Chain – For Vic-Let * R-170-900-HCT 719.50

* For use with VHCT900 to accommodate pipe sizes greater than 24”.

189



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


Vic-tap® ii * Parts A and B are designed for use with Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi.

Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II.

Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.

Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).

* Parts A & B can be purchased separately.

Tool Model Part NumberShipping Weight

LbsRental


Vic-Tap II - Parts A and B only R-000-902-VT2 70 $3011.00 $6616.00

Part A only R-100-902-VT2 – – 4512.00

Part B only R-300-901-VT1 – – 4520.00

Part C 4 x 2Z\x R-016-931-010 – – 1325.00

5 x 2Z\x R-020-931-010 – – 1325.00

6 x 2Z\x R-024-931-010 – – 1325.00

8 x 2Z\x R-032-931-010 – – 1384.50

NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $472.00. Part. No. N-E15-000-004.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


pressfit® tools

pft505 The Pressfit Tool is supplied in a carrying case with a Pressfit System Product Assembly and Tool Operation Manual.

The Pressfit Tool is electrically powered and hydraulically driven and requires a 110v/60 cycle/6.5 amp – AC current supply.

NOTE: Jaws available only for rent with the rental of a Pressfit Tool.



LbsRental


PFT505 Pressfit Tool – Tool Only R000505PFT 43 $616.00 $4800.00

pft505 Jaws only Individual Pressfit jaws are available for rental or purchase. Specify size required on order.



Lbs Jaw SizeRental


Pressfit Jaws Only

R3DC500050

15

Z\x” $169.00 $1116.50

R3DC500075 C\v” 169.00 1116.50

R3DC500100 1” 169.00 1116.50

R3DC500125 1Z\v” 169.00 1116.50

R3DC500150 1Z\x” 169.00 1116.50

R3DC500200 2 “ ‡ 169.00 1116.50

‡ 2” NOTE: In order to properly press 2” Style 570, 590, 568 and 586 stainless steel elbows, your press jaws must contain the prefix 3DC.

pft509 pressfit tool The Pressfit Tool is supplied in a carrying case with a Pressfit System Product Assembly and Tool Operation Manual.

The Pressfit Tool is battery powered and hydraulically driven.



Lbs Tool List Price

Radial Press, Charger, 4 Jaws, 2 Batteries, Steel Carrying Case R000509PFT 46 $5007.50

pft509 Jaws only Individual Pressfit jaws are available for purchase. Specify size required on order.



Lbs Jaw Size List Price

Pressfit Jaws Only

RJAW509050

15

Z\x” $566.50

RJAW509075 C\v” 566.50

RJAW509100 1” 566.50

RJAW509150 1Z\x” 1858.50

pressfit accessories Tool Model Part Number List Price

Battery Charger NE90000510 $250.00

Individual Batteries NE90000509 181.50

pressfit insertion gauges

Request Part No. R000500SET for Pressfit Gauges.

191



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


pipe cut-off tools

Vct1 VCT1 Manual handles 4 – 24” pipe up to 0.500” thick. A worm gear drive crank handle provides smooth, manual travel, easy control and accurate cutting. Tools are supplied with one each #00, #0, and #1 acety-lene tip. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter.

Capacities: 4 – 24” pipe *

Wall Thickness: 0.065” – 0.0500” (with tips supplied)



LbsTool

List Price

VCT1 R000911VCT 22/29 $3080.00

* To increase capacity, a 40-inch chain is available for $295.50 (Part No. N-C00-002-VCT).

Vct2 VCT2 Automatic is powered by a 120 VAC motor with SCR remote control. A steel guide rail is recom-mended for cuts on vertical pipe (over 12” diameter). Tools are supplied with one each #00, #0, and #1 acetylene tips. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter.

Capacities: 6” – 24” pipe *

Wall Thickness: 0.065” – 0.0500” (with tips supplied)

Speed Control: SCR

Power Required: 120 VAC

Motor Rating: 15 W 10,000 rpm

NOTE: Guide rail is sold separately. Recommended for pipe 14” and above.



Lbs List Price

VCT2 R000912VCT 33/39 $7433.50

Guide Rail D-600 for up to 24” pipe NC00170VC2 – 1957.00

* To increase capacity, a 40-inch chain is available for $295.50 (Part No. N-C00-002-VCT).

accessories vct1 & vct2 StaNdard tIP for acetyLeNe (102)

Size Part Number Price Each

00 N-C00-102-T00 $63.00

0 N-C00-102-0T0 63.00

1 N-C00-102-0T1 63.00

fLaSHBack arreStor QUIck dIScoNNect

Size Part Number Price Each

Fuel Assy. – ZOSP – 2A N-CZS-000-P2A $134.50

Oxy. Assy. – ZOSP – 1A N-CZS-000-P1A 134.50

Fuel Plug – ZOP – 2A N-CZ0-000-P2A 88.00

Oxy. Plug. – ZOP – 1A N-CZ0-000-P1A 88.00



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


warNING• always read and understand all operating and maintenance instructions before

attempting to use any victaulic pipe preparation tools.

• any victaulic pipe preparation tools must be used by trained operators oNLy. operators that use victaulic Pipe cut-off tools must be knowledgeable in sound welding and safety procedures.

Misuse of any equipment and lack of adherance to proper safety procedures may result in serious personal injury, property damage, and/or product damage.

how to order When ordering tools or tool parts, please include the following information:A. PARTS ORDERS1. Tool Model Number. Example: VE436MC. 2. Tool Serial Number. The serial number can be found on the tool name plate. Example: 0436 xxxx. 3. Part Number and Description. Example: Part #105, Upper Shaft. 4. Where to send the part(s). Company Name, Address and Telephone Number5. Attention: Person’s Name6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. B. TOOL ORDERS1. Tool Model Number. Example: VE416FSD. 2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool. 3. Where to send the tool. Company Name, Address and Telephone Number4. Attention: Person’s Name5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. C. TOOL RENTAL ORDER1. A completed and signed tool rental agreement. 2. Purchase Order Number. 3. Tool Model Number. Example: VE272SFS4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool. 5. Where to send the tool. Company Name, Address and Telephone6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. NOTES: Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving. PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116. Copper/nickel pipe - contact Victaulic for details. Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets. Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and to ANSI/AWWA C-606 standards. SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done. Optional rolls are available at an additional cost.

193



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS


terms and conditions of tool rental1. Lessor rents to Lessee and Lessee leases from Lessor the tool(s) and accessories listed on the reverse side hereof, which are designed for use in the

preparation of pipe to receive Victaulic products, hereinafter called the leased property; for the term specified, commencing when the leased prop-erty is delivered to carrier for delivery to Lessee.

2. Rental Rate. Lessee agrees to pay rent at the rates specified on this agreement. The rental shall be due and payable at the end of each month during the term of the lease. Terms of payment: net 30 days from date of invoice. If lease is terminated any time during the initial month, the rental shall be payable at the then current published monthly rental rate. If lease is terminated any time during a subsequent month, the rental will be prorated. (This agreement is valid for one (1) year, at the time of signing. It will be automatically renewed with price in effect at the time of renewal until the signee terminates the agreement.)

3. On-Account Payment. Lessee, on executing the agreement, has made an on-account payment to Lessor which shall be returned to Lessee upon termination of the lease, or applied to any open invoices on the Lessee’s account, provided Lessee is not in default under any of the term of the lease and has returned leased property in good condition, less ordinary wear and tear.

4. Freight. Outbound: F.O.B. Shipping Point (Our Option) – Freight Collect. Return: Lessee shall pay all shipping charges for return of the leased property.5. Use. All leased property is for the exclusive use of Lessee only, and may not be assigned, transferred, sublet or loaned to or used by any other party,

without prior written consent of the Lessor.6. Ownership. The property leased is and shall at all times remain the sole property of the Lessor, and Lessee shall have no right, title or interest therein

except as expressly set forth in this Lease.7. Taxes. Lessee shall pay all taxes, assessments, license and registration fees levied on the leased property while in the Lessee’s possession and Lessee

shall keep the leased property free and clear of all liens and encumbrances. Lessee shall pay all sales taxes invoiced by Victaulic Company unless the lessee provides the lessor with a valid sales tax exemption certificate for the state where the tool is delivered.

8. Access. Lessor shall at all times have free access to the leased property and to the premises on which located, for the purpose of examining the leased property.

9. Return of Property. Lessee shall return all leased property, properly crated, freight prepaid, and insured for its market value to Lessor at one of the locations indicated on the back cover. If Lessee fails to return the leased property upon termination, Lessee shall pay rent at the then current monthly rental rate until returned, and Lessor shall also have the right to remove the leased property from Lessee’s premises, without recourse to any legal pro-ceedings.

10. Repairs and Servicing. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply replacement tools and/or parts, without cost, upon return of the leased property to Lessor.

11. Damage or Loss. If leased property is damaged by reason of other than normal recommended use, Lessee shall indemnify Lessor for the cost of repairs. If leased property is not returned to Lessor in accordance with the terms of this Agreement for any cause or reason whatsoever, including, without limiting the generality of the foregoing, loss, theft, damage, accident, neglect, abuse or destruction, by fire or otherwise, whether due to Lessee’s fault or not, Lessee shall pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current Victaulic price list for Pipe Preparation tools.

12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of whatsoever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee’s delivery, possession, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding the termination of this Lease.

13. Lessor’s remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies:

(a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the Lessee.

(b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property. (c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or

other process of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a termination of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing.

(d) To terminate this lease as to any or all items of leased property. (e) To pursue any other remedy at law or in equity. Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance

of all obligations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased prop-erty from re-rental or sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the Lessee’s obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently or separately.

14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property, the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.

15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addition to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.

16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or remedies hereunder or enforcing any of the terms, conditions, or provisions hereof.

17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, execu-tors, administrators, personal or legal representatives, successors and assigns.

18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid, it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.



ctI

oN

13

PI

Pe

Pr

ePa

rat

IoN

to

oLS


terms and conditions of tool saleControlling Provisions: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.

No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waive is specifically accepted in writing by an authorized representative of Victaulic.

Prices, Designs and Terms and Conditions of Sale are subject to change without notice.

Minimum Order: $100.00 net for any single order.

Terms of Payment: As stated on invoice. Maximum permissible interest rate thereafter.

Shipping Terms: F.O.B. shipping point (our option), freight prepaid and allowed on single orders having a net price value of $7,500 and over, for shipment at one time to one destination within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. pos-sessions.

Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.

The most economical routing to recognized delivery points will be used, at our discretion. If special routing is desired, orders should so state.

Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.

Shipping dates are estimated as closely as possible. We use our best efforts to ship within the time estimated, but cannot guarantee to do so. In the event production or shipment is delayed, we reserve the privilege of changing shipping estimate. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.

Orders, when accepted, cannot be countermanded without our written consent. No material will be taken back without our written con-sent. Orders for non-standard material may not be cancelled nor will we accept return of such material for credit.

All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.

Weights: All weights are approximate shipping weights and subject to change without notice.

Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change prod-uct specifications, designs, and standard equipment without notice and without incurring obligation.

Warrantystandard product warranty applies. see inside Back cover.

NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.

195



SectIo

N 13

PIP

e P

rePa

ratIo

N to

oLS

terms and conditions of SaleCONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.

No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.

Prices, Designs and Terms and Conditions of Sale are subject to change without notice.

TERMS OF PAYMENT: As stated on inovice. Maximum legal interest rate charged thereafter.

MINIMUM INVOICE CHARGES: $100 net for any single order.

SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders having a net price value of $7500 and over, for shipment at one time to one destination into distributor stock, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.

Shipping and handling charges on orders less than net price value of $7500, F.O.B. shipping point (our option) will be paid by the customer. The most economical routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer, and is a deviation to our normal handling methods, will be added to the order and paid by the customer.

Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.

Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.

Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet ship-ping dates.

Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard (i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the right to change the designation of products from standard to non-stan-dard and vice versa. This may be done at any time without notice, and without incurring obligation. For further information contact Victaulic.

All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsi-ble for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.

WEIGHTS: All weights are approximate shipping weights and subject to change without notice.

Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.

WarrantyWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.

THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.

Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.

This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete infor-mation supplied by Buyer or its representatives.

Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.EFFECTIVE AUGUST 4, 2008

Documents

Victaulic PriceList 2010-Main