Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Training Programme on
at Hotel Radha RegentJawaharlal Nehru Salainear Koyambedu Bus Station Chennai
8 – 10, December 2014
By the Eminent in NDT Dr O Prabhahar-OP Techs R.Balakrishnan-Manager/CQ/BHEL (Retd)
V Muralidharan-International Welding Technologist
WELDING & NDE INSPECTION METHODOLOGY
TWIN TECHS(Institution for Welding and NDT Inspection &Training)17/13-4th Cross Street, Indira Nagar,Adyar, Chennai-600020Ph No 044-42117358,9840663162,[email protected], [email protected]
he twin Technologies, Welding & NDE play Tvery important roles in fabrication Industries
for several years. Though many modern technologies
are available in the global markets, the quality of the
welded components depends mainly on the adoption
of good practice of welding and its Inspection
methodology. Our objective is to provide quality
training and thus to inspire the performers for making
efficient joints on work pieces by proper welding and
also to adopt precise Inspection methodology to
ensure its quality and soundness
This training module helps the participants of the
programme not only to understand various Weld
Technologies but also to practice on quality
evaluation of welds by employing suitable and
precise Non Destructive Testing on the joints.
So, to carry out the objective of imparting efficient
knowledge of Inspection methodology on Welds to
the participants, a-3-day training schedule is designed
by the experts who have excellent knowledge and
work experience in the field of metallurgy, welding
and Non Destructive Testing.
The subjects to be taught
lQuality Concepts
Basic Metallurgy
Various Welding Techniques
Weld Defects (Causes, evaluation& remedies)
Conventional NDE Techniques to evaluate
Surface & sub surface weld defects
Weld symbols & weld measurements
Weld equipments & accessories
Welder Qualification
Weld reports preparation (WPS,PQR,)
International welding Codes & Standards and
Practical demonstration.
The BENEFICIARIES
The executives, Supervisors and Technicians who
are working in Fabrication Industries, power sectors
,Oil and Gas Sectors ;
Engineering Faculty, Students and Research
Scholars would also find the course highly beneficial
On the first day Registration will commence at 0830
hrs. On all other days the programme timings will be
from 0900 - 1800 hrs with breaks in between for tea
and lunch.
l
l
l
l
l
l
l
l
l
PROGRAMME VENUE
Hotel Radha Regent 171. Jawaharlal Nehru Salai,near Koyambedu Bus Station ,Chennai.
Dates : 8th – 10th December 2014
Timings : 9.00 to 1700 Hrs in all training Days
Dr.O.PRABHAKAR –OP Techs
He worked as a Professor at the Indian Institute of Technology, Chennai in the D e p a r t m e n t o f M e t a l l u r g i c a l Engineering. He was also the Head of the Department for three years from 1987 to 1990. Subsequently he took voluntary
R. BALAKRISHNAN M.Sc (Physics)
He is now serving as a Guest faculty At Anna University, Guindy, Chennai since Aug 2013 and handling classes for B.Tech -Material Science, B.E-Mechanical Engineering and M.E-Manufacturing Engineering students.
VENKATACHARI MURALIDHARAN
He has been well recognized as Innternational Welding Technologist and he is promoting Welding activities in the southern parts of India through several Welding Training and development in Industries and academic Institutions. His
COURSE PERFORMERS
retirement from the Indian Institute of Technology in the year 1998 after teaching and doing research in the areas of nondestructive evaluation and metal casting for nearly 30 years and later he taught at the Nanyang Technological University, Singapore from 1998 to 2004.
Presently he is stationed in Chennai and is working as a consultant to M/S Sundaram Brake Lining, Chennai and a few steel foundries. He has published multimedia educational CDs and conducts Level III orientation courses.
Dr. O. Prabhakar obtained his B.Tech and Ph.D in Metallurgy from the Indian Institute of Technology, Chennai and M.E in Mechanical Engineering from Indian Institute of Science, Bangalore. His primary areas of interests are nondestructive evaluation and metal casting.
He retired as Manager in Corporate Quality-Chennai in Feb 2013. He has 34 years of field experience in NDT & Quality Audit and surveillance activities in the Global recognized organization Bharat Heavy Electricals Limited (BHEL) in various divisions.
He acted as Secretary- ISNT Chennai Chapter –He is one of the Faculty of ISNT Chennai Chapter and promoting NDT activities of the organization since 1988 onwards. He occupied himself as course director for several ASNT-SNTTC-1A Certification Training Courses in various NDT methods as organized by ISNT Chennai Chapter and several academic Institutions and Industries.
contribution to the professional Institutions like IIW and ISNT are exemplary.
He worked in several Industries at abroad in high positions. He is having 46 Years of Industrial and field experience in the Welding and Erection of Pressure Vessels, Process Columns, Storage Tanks of Cone roof type and Floating roof type for oil refineries, communication towers and also adequate knowledge of machining and maintenance of factory equipments and transport vehicles, preparation of quality manuals in line with ISO 9001/ ISO 3834 ISO 14731 / and ISO 9606 standards requirements / quality assurance systems / and training on the importance of quality in the system by educating the employees etc.
ADDITIONAL FACULTY
Highly experienced faculties from reputed organizations / institutions with wide experience in the field will also be assigned to share the sessions with case studies & demonstrations..
COURSE FEE:
Rs. 10,000/- + Fee includes, course material, course kit, Tea / coffee and snacks during the Tea Breaks in the Morning & Evening Sessions and Lunch on all actual days of training programme and Examination days. All payments may be made either by DD or by cheque payable at all branches in favour of Twin Techs , Chennai
The course fees paid would not be returned in case of cancellation or absent by the participants to the course.
DISCOUNTS
10% discount for three or more participants, if sponsored by the same organization. (All discounts are applicable only if fee is received by the Institution before the commencement of the programme.
The participation certificates will be issued only to the participants who have attended all Theoretical and Practical sessions ..
TWIN TECHS(A Institution for Welding and NDT Inspection &Training)17/13-4th Cross street,Indiranagar,Adyar-Chennai-600020
Ph No 044-42117358,9840663162,[email protected],[email protected]
Training on
WELDING & NDE INSPECTION METHODOLOGY8th - 10th December 2014
APPLICATION FORM
Signature
Note: Please attach two Passport Size Photographs and Photostat copies of qualification and Experience certificates
Name:
Mr/Mrs
Designation
Qualification
Organization
Experience
D O B & Age
Address for Communication
Contact No Email ID
Course Fee Payment Details Amount DD / Cheque No Bank Address