-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 1 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
The following sample(s) was/were submitted and identified on
behalf of the client as:
Qi ID: 2794
Licensee: Shenzhen DAK Technology Co., Ltd. 3-4F, Building D,
DeMei Industrial Center, Donghuang Second Road, Longhua New
District, 518000, Shenzhen, Guangdong, China
Model: T524-S
Product Category: BPP Transmitter
Authorise Test Lab: SGS-CSTC Standards Technical Services Co.,
Ltd. Shenzhen Branch
Compliance Test Specification:
The Qi Wireless Power Transfer System Power Class 0
Specification Part 3: Compliance Testing Version 1.2.4 February
2018
Result: In the opinion of SGS-CSTC the presented unit was found
to be in compliance with the Compliance Test Specification.
Remark: None
______________________ ______________________ Ryan Li Megan Xue
Approved by Tested by
-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 2 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
1. Product Information: Product Category: BPP Transmitter
The design of Power transmitter:
A28
Product name: Fast Wireless Charging Stand
Rated input: 5 V , 2 A
Additional Information for adapter:
Model: C-P32 Input: 100 – 240 V~, 50 / 60 Hz, 0,5 A; Output: 5,2
V , 2000 mA
2. Label: The artwork below may be only a draft.
N/A
-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 3 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
3. Test: The test was done in the Electrical Safety Laboratory
of SGS-CSTC in Shenzhen.
These tests fulfil the requirements of standard ISO/IEC
17025.
When determining the test conclusion, the Measurement
Uncertainty of test has been considered.
Ambient Temperature: 20℃ - 25℃
Relative Humidity: 35% - 65%
Possible test case verdicts:
Test case does not apply to the test object: N/A (or N)
Test item does meet the requirement: P(ass)
Test item does not meet the requirement: F(ail)
Testing:
Date of receipt of test item: 2018-03-07
Date(s) of performance of tests: 2018-04-12
-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 4 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
Clause Test Name Measure: Verdict
CONFORMANCE TO COMMUNICATIONS INTERFACE REQUIREMENTS
Load modulation
1 The BSUT communication with TPR#3 success, and maintain 30s,
1st attempt.
-- P
The BSUT communication with TPR#3 success, and maintain 30s, 2nd
attempt.
-- P
The BSUT communication with TPR#3 success, and maintain 30s, 3rd
attempt.
-- P
CONFORMANCE TO SYSTEM CONTROL REQUIREMENTS
Selection phase
2 TPR#1A enters the power transfer phase at most three
times.
P
Digital ping: Power signal characteristics
3(a) Rectified Voltage Vr (TPR#1A) P
Operation Frequency fop1 P
Operation Frequency fop2 P
3(b) Rectified Voltage Vr (TPR#1B) P
Operation Frequency fop1 P
Operation Frequency fop2 P
3(c) Rectified Voltage Vr (TPR#1C) P
Operation Frequency fop1 P
Operation Frequency fop2 P
3(d) Rectified Voltage Vr (TPR#1D) P
Operation Frequency fop1 P
Operation Frequency fop2 P
Digital ping: No response
4 Time interval tping_test < 98 ms P
Digital ping: Signal Strength
5 Rectified Voltage Vr P
Operation Frequency fop1 P
Operation Frequency fop2 P
-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 5 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
Digital ping: Termination
6 tpingterm1 < 48 ms P
6(a) tpingterm4 < 48 ms P
7(a) tpingterm2 < 29 ms P
7(b) tpingterm3 < 29 ms P
7(c) tpingterm4 < 29 ms P
Identification & Configuration: Packet sequence
8(a) |Vr1 – Vr2 | < 0,2 V P
8(b) 80.0 ms < Timpropersequence < 145 ms P
8(c) Transmitting at least 3 Control Error Packets P
8(d) Transmitting at least 3 Control Error Packets P
Identification & Configuration: Packet timing
9 77ms < tpacket timing < 111ms P
10 -- -- --
Identification & Configuration: Communication error
11 118 ms < tcomm_error < 152ms P
Identification & Configuration: Packet content
12 -- -- --
13 149.0 ms < toutofrange < 239ms P
13(a) 149.0 ms < toutofrange < 239ms P
13(b) 201.0 ms < toutofrange < 239ms P
13(c) 201.0 ms < toutofrange < 239ms P
14 Transmitting at least 3 Control Error -- P
Identification & Configuration: Power transfer contract
15 -- -- --
Power transfer: Packet sequence
16 201.0 ms < tpowerpacket < 239ms P
16(a) Transmitting at least 3 times Proprietary Packet -- P
16(b) Remains power transfer phase for at least 12 sec. -- P
Power transfer: Packet timing
17(a) 700ms < Removed the Power Signal < 1828ms P
17(b) 700ms < Removed the Power Signal < 1828ms P
-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 6 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
18 8000ms < Removed the Power Signal < 24028ms P
Power transfer: Packet content
19 -- -- --
Power transfer: Power control
20(a) Rectified Voltage V1 P
Rectified Voltage V2 P
Rectified Voltage V3 P
Rectified Voltage V1_min -- P
Rectified Voltage V2_max -- P
20(b) Rectified Voltage V1 P
Rectified Voltage V2 P
Rectified Voltage V3 P
Rectified Voltage V2_min -- P
Rectified Voltage V1_max -- P
21 tstabilize ≥ 100 ms P
Power transfer: Termination
22 tendpower ≤ 28.0 ms P
CONFORMANCE TO SYSTEM PERFORMANCE REQUIREMENTS
Guaranteed power
23(a) Rectified Voltage Vr TPR#1A (4.12V - 4.28V) P
23(b) Rectified Voltage Vr TPR#1B (6.86V - 7.14V) P
23(c) Rectified Voltage Vr TPR#1C (4.12V - 4.28V) P
23(d) Rectified Voltage Vr TPR#1D (7.35V - 7.65V) P
23(e) Rectified Voltage Vr TPR#1E (4.9V - 5.1V) P
23(f) Rectified Voltage Vr TPR#06 (4.9V - 5.1V) P
Thermal Performance
24 < Ambient temperature + 12℃ P
Foreign Object detection
25(a) Temperature of Foreign Object #1 P
Temperature of Foreign Object #1 (2 mm space) P
Temperature of Foreign Object #1 (5 mm space) P
25(b) Temperature of Foreign Object #1-OC P
-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 7 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
Temperature of Foreign Object #1-OC (2 mm space) P
Temperature of Foreign Object #1-OC (5 mm space) P
25(c) Temperature of Foreign Object #2 P
Temperature of Foreign Object #2 (2 mm space) P
Temperature of Foreign Object #2 (5 mm space) P
25(d) Temperature of Foreign Object #3 P
Temperature of Foreign Object #3 (2 mm space) P
Temperature of Foreign Object #3 (5 mm space) P User interface:
object placed
26 tindicate ≤ 0.5 s P
User interface: transfer in progress
27 BSUT enter power transfer or charging indication is
active
P
User interface: transfer complete
28 tcomplete ≤ 3 s P
User interface: fault
29 tcomplete ≤ 3 s P
User interface: multiple devices
30 -- -- --
User interface: limited power
31 Limited power indication is active with the load resistance
of TPR#1A at 8Ω.
P
Limited power indication is active with the load resistance of
TPR#1A at 3.5Ω.
P
-
________________________________________________________________________
Test Report Report No: SZES180300079801 Date: 2018-04-24
Project No.: SZES1803000798PS Page 8 of 8
This document is issued by the Company subject to its General
Conditions of Service printed overleaf, available on request or
accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and,
for electronic format documents, subject to Terms and Conditions
for Electronic Documents at
http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx.
Attention is drawn to the limitation of liability, indemnification
and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within
the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not
exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document
cannot be reproduced except in full, without prior written approval
of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is
unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test
report refer only to the sample(s) tested and such sample(s) are
retained for 30 days only. Attention: To check the authenticity of
testing/inspection report & certificate, please contact us at
telephone: (86-755)83071443, or email: [email protected]
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen
Branch
Member of the SGS Group (SGS SA)
518057 t (86-755)26012053 f (86-755)26710594 www.cn.sgs.com
518057 t (86-755)26012053 f (86-755)26710594 e
[email protected]
No.1 Workshop,M-10,Middle Section,Science & Technology
Park,Shenzhen,China 中国·深圳·科技园中区 M-10 栋一号厂房 邮编：
4. Photo documents: Products General
Products General
- - - End of Report - - -
