Tag HolderTutorial created by Maria Bell

Photos copyrighted and the property of Maria Bellwww.stampininspirations.blogspot.com

Materials

8 ½ x 11” card stock(3) 3 ¼ x 5 ¼” card stock

RibbonDouble stick tape or glue

Hole PuncherScorer

On the 11” side of the card stock, score the card stock at 3 ½”, 3 ¾”, 7 ¼” and 7 ½”

Turn the card stock to the 8 ½” side and score at 3”

Fold the card stock at the 3” score line

Fold at the remaining score lines as shown in the picture

At the corners of the 3” flap, cut a triangular piece starting from the first 3 ½” vertical score line to the 3” horizontal score line

Repeat the step to right side of the card stock

When you’ve cut of the triangular pieces, the card stock should appear as shown in the picture

Apply double stick tape to the ¼” folds on the inner side of 3” flap up to the 3” score line as shown in the picture

Fold the card stock at the 3” shoreline adhering it to the card stock to create pockets

The (3) 3 ¼ x 5 ¼” card stock will be used to create tags

To create the corners of the tags, measure 1” to the top edge and side edge of one end of the card stock. Mark with a pencil. Repeat the steps to the right side of the card stock

When you’ve completed marking the card stock, it should appear as shown in the picture. Repeat the steps for the remaining (2) 3 ¼ x 5 ¼” card stock

Cut at the markings and when completed, the card stock should appear as shown in the picture

Punch a hole at the center of the pointed end of the tag

Insert a ribbon through the hole and tie it to create a bow. Decorate the tags as desired.

Decorate the tag holder and apply adhesive across the front center of the holder and adhere a ribbon across the middle and around the holder. Tie a bow to the right.

When the tags are inserted into the pocket, your holder will appear as shown in the photo

Please email me at cardinspired@gmail.com if you have any questions regarding this project