Connections*

Externally threaded

Soldering

*For specific dimensions, or information about other types of connections, please contact your SWEP sales representative.

Size Height of plate pack Total weight

Materials Channel plate Brazing

SC Stainless steel Copper

MC Mo-steel Copper

The B25 delivers efficient heat exchange solutions across a wide capacity interval, and is quick and simple to adapt for numerous applications. The product’s versatility and excellent heat transfer make it an excellent choice for demanding cooling applications and as a condenser in two-phase applications.

Pressure classesS Standard, evaluated per EN 13345.M Medium, evaluated per EN 13345.D Higher, developed for CO2 applications, evaluated per EN 13445.

Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume flow Channel volume (SI) Channel volume (US)

www.swep.net

CH

ALL

EN

GE

EFF

ICIE

NC

Y

SC D 8,4+(2,34×NoP) mm 3,96+(0,234×NoP) kg

0.331+(0.092×NoP) in 8.73+(0.516×NoP) lb

MC S 4,4+(2,34×NoP) mm 2,18+(0,234×NoP) kg

0.173+(0.092×NoP) in 4.89+(0.516×NoP) lb

MC M 4,4+(2,34×NoP) mm 2,18+(0,254×NoP) kg

0.173+(0.092×NoP) in 4.80+(0.56×NoP) lb

SWEP B25

140 24 mm (0.945 in) 24 mm (0.945 in)24 mm (0.945 in)24 mm (0.945 in)

9 m³/h (39.6 gpm)0,114 dm3

0.00403 ft3

F1 F2

F3 F4

524 (

20.63

)

479 (

18.86

)

116 (4.57)

72 (2.83)

Third party approvalsSWEP BPHEs are generally approved by listed below certifi cation organizations:Europe, Pressure Equipment Directive (PED)America, Underwriters Laboratories Inc (UL)Japan, Kouatsu-Gas Hoan Kyoukai (KHK)Additionally SWEP holds approvals from a vast variety of other certifi cation organizations. For approval information regarding a specifi c product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.

The BPHE conceptThe Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a fi ller material between each plate. During the vacuumbrazing process, the fi ller material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media at different temperatures to come into close proximity, separated only by channel plates that enable heat from one media to be transferred to the other with very high effi ciency. The concept is similar to other plate and frame technology, but without the gaskets and frame parts.

Cover platePlate package

Connections

Cover plateChannel plates

Zero hole channel plate

SSP calculation softwareWith SWEP’s unique SSP, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It’s also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss different product solutions, SWEP offers all the service and support your need.

Material disclaimerThe information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products’ suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel are still subject to corrosion if used in unsuitable environments.

www.swep.net

CH

ALL

EN

GE

EFF

ICIE

NC

Y

MC-S, MC-MPED

SC-DPED

MC-S, MC-MUL

1015202530354045505560

-196 20 50 100 135 150 175 200 225

(bar)

(°C)

PEDM Pressure S Pressure

-320.8 68 122 212 275 302 347 392 437 (°F)

150200250300350400450500550600650700750800850

(PSI)

404244464850525456586062

-196 20 50 100 135 150 175 200 225

(bar)

(°C)

PED

-320.8 68 122 212 275 302 347 392 437 (°F)

580610640670700730760790820850880

(PSI)

Pressure D

1015202530354045505560

-196 20 50 100 135 150 175 200 225

(bar)

(°C)

PEDM Pressure S Pressure

-320.8 68 122 212 275 302 347 392 437 (°F)

150200250300350400450500550600650700750800850

(PSI)

404244464850525456586062

-196 20 50 100 135 150 175 200 225

(bar)

(°C)

PED

-320.8 68 122 212 275 302 347 392 437 (°F)

580610640670700730760790820850880

(PSI)

Pressure D

550570590610630650670690

(PSI)

-320.8 400 (°F)

UL

-196 204 (°C)43

44

45

46(bar)

5

10

15

-196 204

(bar)

(°C)

UL

(PSI)

-320.8 400 (°F)

130135140145150155160

SWEP B25