Upload
nguyenkhuong
View
220
Download
1
Embed Size (px)
Citation preview
Pressure classesS Standard, evaluated per EN 13345.M Medium, evaluated per EN 13345.F Intermediate, evaluated per EN 13345.H High, evaluated per EN 13345.E Higher, developed for CO2 applications, evaluated per EN 13445.
Connections*
*For specific dimensions, or information about other types of connections, please contact your SWEP sales representative.
Size Height of plate pack Total weight
Materials Channel plate Brazing
SC Stainless steel Copper
NC Stainless steel Copper
MC Mo-steel Copper
The B120T has been specially developed to operate in demanding heating and industrial applications, typically water-water applications and oil coolers. The product has contributed to the rapid switch to BPHEs from traditional gasket plate heat exchangers and shell-and-tube solutions. It is widely used as a condenser in air conditioning and refrigeration.
Externally threaded
Internally threaded
Soldering FlangesDIN/DNC
Internally threadedhexagonal exterior
Victaulic
Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume flow Channel volume (SI) Channel volume (US)
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
YSWEP B120T
250 42 mm (1.654 in) 42 mm (1.654 in)42 mm (1.654 in)42 mm (1.654 in)
27,4 m³/h (120.6 gpm)0,241 dm3
0.00851 ft3
F1 F2
F3 F4
525 (
20.67
)
456 (
17.95
)
243 (9.57)
174 (6.85)
SC SSC MNC SNC MMC S
10+(2,29×NoP) mm 8,33+(0,404×NoP) kg
0.394+(0.09×NoP) in 18.36+(0.891×NoP) lb
SC F 14+(2,29×NoP) mm 9,62+(0,404×NoP) lb
0.551+(0.09×NoP) in 21.21+(0.891×NoP) lb
SC H14+(2,29×NoP) mm 11,16+(0,404×NoP) lb
0.551+(0.09×NoP) in 24.60+(0.891×NoP) lb
SC E18+(2,29×NoP) mm 12,5+(0,404×NoP) kg
0.709+(0.09×NoP) in 27.5+(0.891×NoP) lb
Third party approvalsSWEP BPHEs are generally approved by listed below certifi cation organizations:Europe, Pressure Equipment Directive (PED)America, Underwriters Laboratories Inc (UL)Japan, Kouatsu-Gas Hoan Kyoukai (KHK)Additionally SWEP holds approvals from a vast variety of other certifi cation organizations. For approval information regarding a specifi c product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.
The BPHE conceptThe Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a fi ller material between each plate. During the vacuumbrazing process, the fi ller material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media at different temperatures to come into close proximity, separated only by channel plates that enable heat from one media to be transferred to the other with very high effi ciency. The concept is similar to other plate and frame technology, but without the gaskets and frame parts.
Cover platePlate package
Connections
Cover plateChannel plates
Zero hole channel plate
SSP calculation softwareWith SWEP’s unique SSP, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It’s also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss different product solutions, SWEP offers all the service and support your need.
Material disclaimerThe information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products’ suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel are still subject to corrosion if used in unsuitable environments.
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
YSWEP B120T
SC-M, NC-M, SC-HPED
40
41
42
43
44
45
-196 225
(bar)
(°C)
ASME
580
600
620
640
660
(PSI)
-320.8 437 (°F)
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
343638404244464850
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
495
535
575
615
655
695
(PSI)
-320.8 68 122 212 275 302 347 392 437 (°F)
Pressure M Pressure H
UL ASME Pressure S,M,H
550
590
630
670
710
750
790
830
(PSI)
40424446485052545658
-196 20 50 100 135 150 175 200 225
(bar)
(°C)-320.8 68 122 212 275 302 347 392 437 (°F)
Pressure E Pressure F
KHK Pressure H
SC-E, SC-FPED
40
41
42
43
44
45
-196 225
(bar)
(°C)
ASME
580
600
620
640
660
(PSI)
-320.8 437 (°F)
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
343638404244464850
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
495
535
575
615
655
695
(PSI)
-320.8 68 122 212 275 302 347 392 437 (°F)
Pressure M Pressure H
UL ASME Pressure S,M,H
550
590
630
670
710
750
790
830
(PSI)
40424446485052545658
-196 20 50 100 135 150 175 200 225
(bar)
(°C)-320.8 68 122 212 275 302 347 392 437 (°F)
Pressure E Pressure F
KHK Pressure H
SC-S, NC-S, MC-SPED / KHK
40
41
42
43
44
45
-196 225
(bar)
(°C)
ASME
580
600
620
640
660
(PSI)
-320.8 437 (°F)
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
25
27
29
31
33
35
37
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
360
385
410
435
460
485
510
535
-320.8 68 122 212 275 302 347 392 437
(PSI)
(°F)
Pressure S KHK Pressure S
UL / KHK / ASME
40
41
42
43
44
45
-196 225
(bar)
(°C)
ASME
580
600
620
640
660
(PSI)
-320.8 437 (°F)
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
343638404244464850
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
495
535
575
615
655
695
(PSI)
-320.8 68 122 212 275 302 347 392 437 (°F)
Pressure M Pressure H
UL ASME Pressure S,M,H
550
590
630
670
710
750
790
830
(PSI)
40424446485052545658
-196 20 50 100 135 150 175 200 225
(bar)
(°C)-320.8 68 122 212 275 302 347 392 437 (°F)
Pressure E Pressure F
KHK Pressure H