8/9/2019 SW20 Sash Lifts.r6
1/4
DOUBLE HUNG
SLIDERSASH LIFTS
Truth Sash Lifts help provide easyopening and closing of all
double-hungor sliding windows. Truths new#18.16 Series Restoration
Sash Liftwith its traditional finger-pull look, is
designed to complement Truths #17.02Series Restoration Lock.
Truths SashLifts encourage the lifting of thewindow from the
bottom, therebyputting less stress on the sash thanwould occur from
pushing on the toprail. Durable baked enamel finishesare available
to match Truth CheckRail Locks.
WARRANTY: Protected under theterms of the Truth Warranty
forWindow & Door Manufacturers &Authorized Distributors.
Refer toTruths Terms & Conditions for furtherdetails.
MATERIAL: High-pressure, corrosionresistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that
provideexcellent resistance to chipping,scratching and corrosion
whilemaintaining color stability for yearsin direct sunlight.
Please refer to
Truths Color Chart for examples ofTruths most popular finish
options.Truth also offers a wide range ofdecorative plated finishes
contactTruth for additional information onavailability of these
finishes onspecific product lines.
ORDERING INFORMATION &
OPTIONS:
1. Choose Sash Lift style (specify bypart number).
2. Specify finish number.
RECOMMENDED SCREWS:
Types of screws required determinedby material of profile used
(soldseparately). For additional informationregarding screw
selection - see TruthTips.
TRUTH TIPS:
1. For accurate hardware placement invinyl or metal
applications, pre-drillingof the window profile is recommended.
2. For vinyl window applications,mounting screws should pass
throughtwo PVC walls, or one PVC wall andone insert wall. For this
reason, it maybe necessary to use a longer screw thanis
recommended.
3. For metal window profiles, Truthrecommends stainless steel
machinescrews. However, in most applications,stainless steel sheet
metal screws willprovide adequate holding power.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Window sash handles shall be includedwhich will provide a
positive grip onthe sash for easy window operation,while having a
low profile appearance.The sash handles shall be constructedof a
high pressure zinc alloy diecasting.
Window handles/sash lifts shall bemanufactured by Truth
Hardware.
8/9/2019 SW20 Sash Lifts.r6
2/4
[82.6 mm]3.250
[28.3 mm]1.115
[28.4 mm]1.118
[84.1 mm]
3.310
[101.6 mm]4.000
[9.5 mm].375
[19.2 mm].755
[96.5 mm]3.800
[4.7 mm].187
FIG. 1 8790 SASH LIFT
FIG. 2 18.11 SASH LIFT
RECOMMENDED SCREWS:WOOD: (QTY 2) (P/N 19380) #8 PHILLIPS, FLAT
HEAD,
SHEET METAL SCREWSPVC/METAL: (QTY 2) #10 PHILLIPS, FLAT HEAD
(LENGTH AND
THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:WOOD: (QTY 2) (P/N 19380) #10 X 1.0 PHILLIPS,
FLAT HEAD,
SHEET METAL SCREWSPVC/METAL: (QTY 2) #10 PHILLIPS, FLAT HEAD
(LENGTH AND
THREAD TYPE TO BE DETERMINED BY PROFILE)
SASH LIFTS
a
8/9/2019 SW20 Sash Lifts.r6
4/4
SASH LIFTS
0c
[17 mm].650
[1.3 mm].050
[4.4 mm].175
ROUTING
R.375[19.0 mm]
.750[7.6 mm]
WOOD: (QTY 2) (P/N 19051) #6 X 1" PHILLIPS
FLAT HEAD SHEET METAL SCREWS.
[32 mm]
1.250
[63.5 mm]2.500
[7.1 mm].281
FIG. 5 30665.XX RECESSED SASH LIFT
[18.9 mm].745
[4.3 mm].170
[101.6 mm]4.000
.300
[43.4 mm]1.710
[20.7 mm].815
[61.2 mm]2.410
[14.5 mm].570
[4.1 mm].160
[2.2 mm].085
[76.2 mm]3.000
[8.4 mm].330
FIG. 6 32744 RECESSED SASH LIFT
RECOMMENDED SCREWS:
RECOMMENDED SCREWS:WOOD: (QTY 2)#6 PHILLIPS FLAT HEAD SHEET
METAL SCREWS.
(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
700 WEST BRIDGE STREET, OWATONNA, MN 55060 507.451.5620
800.866.7884 TRUTH.COM
