Seminar

Schneider Electric General Presentation

The Widest range of Static Convertors


Positioning of the AC drives product offer in 2000

Function/Performance

ATV18

ATV58 ATV66

ATV66CVF

PkW

High performanceCommunicationSome complex functions

Bonne performancefonctions simples

High performanceseveral complexfunctions

Very high performanceCommunicationSeveral complex functions

ATV08

Very highComm. performanceSeveral complex functions

ATV58CVF

ATV28ATV08

Good performance

0.75KW 15KW 55/75KW 160/250KW 630KW

ATV62

ATV68/ 68CVF

High performanceCommunicationSeveral complex functionsBreadth of range

Schneider Electric General Presentation 5

ATV28 : All the ease of use you could wish for

Initial setting-up

without adjustment

DCTerminals

Auto-tuning for improved

performance

Simplified product

connection thanks to built-

in conducted and radiated

emission filters

Even more compact for easy enclosure integration


Altivar 28 fits in with your requirements

A wide range meeting world standards, and easy to install

Variable speed drive heatsink : 17 ratings, 0.3715 kW

single-phase200/240 V (0.37 to 2.2 kW) three-phase 200/230 V (3 to 7.5 kW) three-phase 380/500 V (0.75 to 15 kW)

ULUL

CSACSA

CECE


ATV28 : The perfect answer to all your applications

A comprehensive and competitive rangefor all your simple machines

Pumps and BlowersVentilation and air-conditioningPacking & Packaging Horizontal handlingSpecial machines

(textiles, metal working, etc..)Mixers / Agitators


Meeting specific requirements

A whole range of accessories and options adapted to your needs

Local control add-onRun, Stop, Potentiometer

Remote display terminal

"PowerSuite" software workshop on CD-ROM:set-up, adjustment, control, back-ups

RS485 connection kit for multidrop serial link

PowerSuite set-up, adjustment and control software

Selection guide from the on-line catalog


Altivar 58 Speed controllers 0,37 to 75 KW


2- TechnologyPower rating < 15 kW

RFI filter coil and capacitors

CapacitorsFerrite

IGBTGate drivers

Mini SKIIP


2- Technology

Power rating > 15 KWLine Chokes integratedHalf controlled rectifier (diodes & thyristors)

Replaces the diode bridge,the load resistor &the contactor.

IPM (Intelligent Power module)Braking transistor RFI filter

conforming with EN55011

Bus bar


2- Technology

Power rating > 15 KWBus bar : strengthen all the connections inside the controller

(wiring is robust and fixed)

Line chokes

Low frequency harmonics reducedReduced voltage distorsionController immunity to disturbances Equipment size reduced

Capacitors DC bus


4- The ATV 58 range: Available offer

I / O extension cards(LI,AI,AO,DT,GI)

Keypad

Programmingconsole

Fieldbus Modbus / RTU

integrated

Communicationcards

(Modbus Plus, FIPIO)(Interbus-S, Unitelway,

Profibus DP , AS-i)

PCconnection

Clientapplication cards

(after study)

ATV 58 is a modular product


4-1-1 Keypad (VW3-A58101)

The keypad is removable and can be delivered with the controller or separately (to order a controller without a terminal: ATV58PU09M2Z)

This keypad can be connected or disconnected with voltage .If the drive is controlled with the terminal and if deconnected :SLF fault will occur.

This keypad can be used to control, adjust and configure the ATV58

4 drive configurations can be stored

Configuration can be up loaded and downloaded

Plain text display of 16 characters - 5 languages (F,GB,D,SP,I)

IP 65 kit for remote location on the enclosure door (L = 3 m)


4-1-4 Extension cards

Tacho-generator feedback card

2 logic inputs Differentiel analog input (0 +10V or 0 -10V) 1 logic output 1 analog output + 10V / - 10V supply Pulse generator feedback card 2 logic inputs 1 logic output 1 analog output AA ; BB (encoder 24 VDC) or A only (inductive sensor)


4-1-6 Communication extension cards

Compatibility with Schneider PLCs

FIPIO: host software for X tel (Telemecanique) and Orphee (April)

Modbus Plus : Télémécanique and Modicon PLCs

Interbus S: 24 V DC external power supply for connection on the main ring (VW3A58304E). Drivecom Profile 21

(message handling included)

Profibus DP : Drivecom Profile 21 (Maximum transmission speed :1,5 Mbit / s) Delivered with bus configuration floppy disc

Unitelway / modbus RTU / Jbus

AS - i


6-1 Performance - Torque

Flux vector control without sensor

Torque in steady state:

With factory settings: Tn for a 1:50 frequency rangeWith optimized settings: Tn for a 1:100 frequency range

Transient maximum torque : 170% Tn during 60 s

200% Tn during 2 s

The HVAC Drive

Altivar 38Mastering elements

for more comfort

Building a New Electric World


The tailor-made drivefor pumps and fans...

A complete range from 0.75kW to 315 kW

Concentrated functions

Immediate start-up Simplified setup. Easy integration in installations. Suitable solution for the building

enviournment..

… and so simple : Air conditioning

and heating. Air treatments and

regulation of water circuits

Ventilation. Pumping.

Altivar 38,dedicated functions...

Altivar 38Mastering elements


A dedicated rangefor pumps and fans from 0,75 up to 315 kW

Voltage rangefrom 380 to 460 V.

Frequency 50 / 60 Hz

Enhanced

comfort and greater energy savings thanks to an accurate regulation of the motors.

Standards and approvals :EN 50178 / IEC 1800-3.EN 55011 class A.EN 55022 class B.Summary


Concentratedfunctions... With Altivar 38, choose a tailor-made solution...

PI regulator,Automatic restart,Catch on the fly,Smoke extraction function,Pump switching

(card in option),Three jump frequencies, etc.

All the essential functions for pumping and fan applications :


TransamericaPyramide(San Francisco / USA)

Canary Warf(London /Great Britain)...

Concentratedfunctions......

… for air conditioning and heating

Grande Arche(La Defense / France)


Concentratedfunctions...

… for pumping applications

Autonomous management of a set of pumps, maintaining constant pressure andspreading wear and tear between thepumps with the Altivar 38 switching function.

Simplified start-up and diagnostics with Altivar 38.

Management of installation faults:if a pump is faulty, it is no longer taken into account during operation.


Simplified setup

Simple, user-friendly dialog tools

Built-in display with parameters protected by padlocking.

Terminal, PC or Pocket PC with the Power Suite* software workshopfor use on site or in the office, etc

”Just enough”…No time wasting,a limited numberof adjustmentsneeded for a quick and efficient setup.

* Software which is common to the Altivar range of variable speed drives. Available in 5 languages : french, english, deutsch, spanish and italian.


Power Suite software

Just follow...

The choice of ergonomics and user-friendliness

Facilitatedadjustments

Safety with the comparison of files

Graphic visualization of the adjustments

PowerSuite - Atelier logiciel - ATV38-3 (connecté)

ATV38-2


Easy integration in installations

Compact, Altivar 38 helps to reduce the size of your enclosures.

Low-cost, the protection kit for direct wall-mounting offersIP21 degree of protection.



Operation and maintenance facilitated where ever you are :

in buildings : N2, Lonworks, Ethernet.

in industry : FIPIO, Modbus Plus(via integrated RS485), Interbus-S, Profibus DP, AS-i, Unitelway, CanOpen, DeviceNet

• supervision of operations,• adjustment,• diagnostics,• consumption monitoring…

Open to all communication networks used


With the Ethernet card and a simpleWeb browser, Transparent BuildingTM

lets you manage your buildings fromany location, at any time … withtotal efficiency.

EthernetTCP/IP


Transparent Building TM


Air treatment plant

Suitable solutionsfor the building environment

From transformer to motor control, a complete offer for protection, distribution, supervision, control and monitoring of your equipment.

To reduce your energy consumption :ECO8 software : demonstrationof energy savings.

Mastering electrical distribution

ALTIVAR 68 to go

even further...


ATV-68Targeted Applications

The desire to extend our offer on targeted applications.

pumps, fans, and compressors

special machines (centrifuges, extruders, grinders…)

simple hoisting and handling applications


ATV-68Innovations in the service des applications

3 motor reactive energy-saving levels (flux) Integration of ATV68 in Eco 8

(pump and fan energy savings)

Process PID With or without correction of internal set point

(weight roll) Auto/manual operation, devalidation of ID gains

Braking by motor loss Without braking module


ATV-68Supervision and automated system functions

Micro programming of logic functions (AND, OR…). of comparator functions (>, <, =..).

Assignment of logic inputs/outputs to supervision of external events

external faults, earth fault, overpressure contact … at outputs of logic functions and comparators

Line contactor control


Menu remindertable

LCD display

Localcontrolkeys

ATV-68User-friendly control keypad

Menumanagementkeys

LEDs

High performanceSoft starter

Altistart 48Let us limit the peaks

Get more with the world’s Power & Control specialist*


Conveyors

Altistart 48,at the heart of your applications

Pumps

Compressors

Fans and high inertia machines


A new range for even better performances...

PumpsFans and high

inertia m/csCompressors,Conveyors...

Altistart 48 at the heart of applications

A complete range having international approvals & certifications.

Performancee with exclusive TCS concept

Protection at all levels

Easy integration :

in enclosures

In control systems.

… and so simple:


International standards and approvals :

• IEC 60947-4-2.• CE Marking.• EMC : classes A and B.• UL / CSA • DNV (marine, off-shore)• C-TICK / GHOST / CCIB / NOM.

A complete rangewith an international vocation

Altistart 48, ready-to-use :Factory set, the Altistart 48 is operational immediately.Wire it, connect and start...

Two voltage ranges :230 to 415 V*.208 to690 V.

For 50 and 60 HzWide tolerance range for generators.

From 17 to 1200 A415 V: 7.5 to 630 kW.690 V: 15 to 1200 kW.


High performance with the exclusive TCS* concept

• Maintain gradualacceleration up tonominal speed, evenincase of highstarting torque.•Improve the lifetimeof the belts andmachinery.

With conventional starting by limiting the current :

• Difficult startingcausing motortemperature rise.• Sudden end ofaccelaration causing mechanical stress•Difficult adjustmentcompromise.

With motor torque control, Altistart 48 provides perfect control of the machine starting and stopping.

The Altistart 48 « TCS system » is the only system enabling to:

To limit stress on the drive chain

*TCS : Torque Control System


Strength on lines subject to interference

Protectionat all levels

motor

• Thermal protection :

by calculation of the

I2t in accordance

with IEC 60947-4-2.

• Preheating functionpreventing

condensation.• Detection of phase

failure.

machine

• Underload protection :

running dry, broken

transmission,

• Overload protection :

clogging, incident...

with adjustable thresholds and

times.

• Stalled rotor.• Control of the direction ofrotation.• Excessive acceleration time.

Some protections can be handled like alarmswithout interrupting the machine operation.


ATS 48 :Electronic Motor Overload Protection

Accurate & Flexible Selectable trip classes meet the requirements for a wide range of

applications

Class 2 Class 10A Class 10 Class 15 Class 20 Class 25 Class 30


Easy integration in enclosures

Simplified wiring with through connections on all models.

Altistart 48 controls : • a starter bypass contactor at the end of starting with all protective functions maintained (thermal, underload, overload, etc…) > Elimination of heat dissipations in enclosure.• a line contactor.

Fans activated and deactivated according to the heatsink temperature.

Avoids unnecessary noise and circulation of dust, Increases the lifecycle of the fans.

Test function for testing the electrical equipment on a small motor.

Line supply

Motor

Motor terminals and by-pass contactor on all ratings.


ATS 48 – End of start Bypass mode

5

consolevisualisation

Filter

Microcontroller

Switchingsupply

I / O

Customer terminals

Firingcircuits

Currentand

voltagesynchronisation

Ventilationauto-

transformer

O/L relay remains in ckt. Even in bypass mode


Easy integrationin control systems

Functions to aid the operation of your installations :

Display of electrical values (current, power, etc), load conditions and operating time.

Configurationof a second motor with differents characteristics.

Cascaded starting and deceleration of several motors.

Maintenance of operator dialog due to a separate control circuit supply.

Numerous configurable inputs/outputs (4 logic inputs, 2 logic outputs,3 relay outputs and and 1 analog output).


For an easy implementation

Factory pre-adjusted to start up standard applications.

Optimisation by simple and intuitive adjustment menus.

Just follow the Power Suite softwareUser-friendly software for configuring the various parameters.

Several operator dialogue tools available

Pocket PC

Built-indisplay

Remotedisplay(for panel door,

optional)



A wide range of communication functions

For remote access to control, monitoring and adjustment functions

Integrated Modbus.

Communication modules : - Ethernet.- Fipio, - Profibus DP, - DeviceNet,

Ethernet TCP/IP for setting up Transparent Factory : open control systems platform based on Internet technology.



AC synchronous servo and stepping motor drive

in one line of devices

3 phase stepping motors torque 1.5 / 2 / 4 / 6 / 12 and 16.5 NmAC synchronous servo motorstorque range from 0.32 to 50 NmTwin Line power electronics for 3 phase stepping motors andAC synchronous servo motorsTwin Line Controller with integrated power electronics, equipped with micro-modules for application-specific configurations

Twin Line


Twin Line motors

3 phase stepping motors

1,50 bis 16,5 Nm

3 phase stepping motors with holding brake

3 phase stepping motors with encoder

3 phase stepping motors with gearbox

AC synchronous servomotorscontinuous torque0,32 to 13,4 Nm

AC synchronous servomotorshigh performancecontinuous torque0,34 to 50 Nm

The following options are possible

l Gearboxl Holding brakel Multiturn measuring system (servomotors)l Encoder (stepping motors)


Twin Line power electronics

Power electronics for 3 phase stepping motors TLD 011and TLD 012

Power electronics for AC synchronous servomotors for standard and high performance motor lineTLD132,TLD 134, TLD136, TLD 138

Modules for positioning controller and power electronics

Documents

Seminar