RPM750 AC Drive - nebula.wsimg.com

Service Address:

RPM750 AC Drive

E492603

RPM Controls11225 Valencia Blvd.Santa Clarita, CA 91381

(661) [email protected]

Performance Features

n

n

n

n

n

n

n

Advanced motor control algorithm

High performance vector control

Optimal V/F mode

Excellent ramp slope control

Fast auto-tune (less than 60 seconds)

Overload:150% rated output current, 1 minute

Low frequency torque:

0.5Hz: 100% rated torque

1Hz: 150% rated torque

Hardware Features

n

n

n

n

n

n

n

n

n

n

n

n

Dual CPU processing for precise controlStandard 5-digit LED keypad, standard RJ45

Keypad connector

5.5 kW and above have standard DC choke

22kW and below have standard internal brake IGBT

Above 22kW brake IGBT is optional

Internal EMC filter with breakpoint design, easy access and disconnection to meet different application requirements

PCBA conformal coating process, increasing environmental tolerance

Unique control terminals: simple switch between source and sink I/O terminals

Reference signal (current) loss detection

Latest generation IGBT's with efficient thermal design

Wireless fan block design for easy replacement

Optional auxiliary fan makes the drive suitable for extended temperature operation

RPM750 Series Profile

1

RPM750 AC Drive

2

0.1s Accel & Decel step response

Excellent voltage and current control

Fast torque response down to 0.5Hz in V/Hz mode

Product Overview

Mission: We will consistantly make great efforts to listen to the needs of our customers, deliver competitive solutions and services, and provide maximum

benefit and value through all products we deliver.

Excellent speed regulation

n

High temperature bus capacitors

RPM Series AC drives combine innovation and ease of use to provide motor control solutions designed to maximize your system performance and reduce your time to design and deliver better machines, Their robust design yields dependable performance in the most demanding situations. Each member of this family of drives offers a unique set of features to distinctively match the needs of your application.

RPM750 AC drives are cost-effective and easy to use for most general purpose applications. They come standard with LED Keypad, built-in I/O, the flexiility of programmable onboard logic, Modbus RTU communications, and robust power circuitry. Designed to meet your application requirements for speed or torque control up to 700 HP (550 kW).

Power and Packaging – Complete power range plus 600/690 volt availability for global applications. Packaging options range from flexible enclosure ratings(Nema 3R, 12, 4X, etc.) to complete power and control options such as:

Circuit breaker, disconnect, and fuse protectionForced air or Air Conditioner coolingLine Reactors and EMI FiltersWide variety of operator devicesCommunications optionsTurnkey Pump Panel SolutionsVFD Bypass (auto or manual)Harmonic mitigation and verification testingComplete custom control systems combining VFD's with PLC's and HMI's

Powerful performance. Application Flexible. Exceptional Value.

Demanding Applications Pump Control Integrated Systems

Performance Features

n

n

n

n

n

n

n

Advanced motor control algorithm

High performance vector control

Optimal V/F mode

Excellent ramp control

Fast auto-tune (less than 60 seconds)

Overload:150% rated output current, 1 minute

Low frequency torque:

0.5Hz: 100% rated torque


Hardware Features

n

n

n

n

n

n

n

n

n

n

n

n

Dual CPU processing for precise controlStandard 5-digit LED keypad, standard RJ45

Keypad connector

5.5 kW and above have standard DC choke

22kW and below have standard internal brake IGBT

Above 22kW brake IGBT is optional

Internal EMC filter with breakpoint design, easy access and disconnection to meet different application requirements

PCBA conformal coating process, increasing environmental tolerance

Unique control terminals: simple switch between source and sink I/O terminals

Reference signal (current) loss detection

Latest generation IGBT's with efficient thermal design

Wireless fan block design for easy replacement

Optional auxiliary fan makes the drive suitable for extended temperature operation

RPM Series Profile

1

RPM750 AC Drive

2

0.1s Accel & Decel step response

Excellent voltage and current control

Fast torque response down to 0.5Hz in V/Hz mode

Product Overview

Mission: We will consistantly make great efforts to listen to the needs of our customers, deliver competitive solutions and services, and provide maximum

benefit and value through all products we deliver.

Excellent speed regulation

n

High temperature bus capacitors

RPM Series AC drives combine innovation and ease of use to provide motor control solutions designed to maximize your system performance and reduce your time to design and deliver better machines, Their robust design yields dependable performance in the most demanding situations. Each member of this family of drives offers a unique set of features to distinctively match the needs of your application.

RPM750 AC drives are cost-effective and easy to use for most general purpose applications. They come standard with LED Keypad, built-in I/O, the flexiility of programmable onboard logic, Modbus RTU communications, and robust power circuitry. Designed to meet your application requirements for speed or torque control up to 550 kW/700 Hp.

Power and Packaging – Complete power range plus 600/690 volt availability for global applications. Packaging options range from flexible enclosure ratings(Nema 3R, 12, 4X, etc.) to complete power and control options such as:

Circuit breaker, disconnect, and fuse protectionForced air or Air Conditioner coolingLine Reactors and EMI FiltersWide variety of operator devicesCommunications optionsTurnkey Pump Panel SolutionsVFD Bypass (auto or manual)Harmonic mitigation and verification testingComplete custom controlv systems combining VFD's with PLC's and HMI's

Powerful performance. Application Flexible. Exceptional Value.

Logic Diagram

3 4

Functions and Featuresn

n

l

l

l

l

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

l

l

l

l

n

n

n

n

Balance of powerful functionality and ease of use.

Powerful platform makes user programming easierBuilt-in advanced function blocks:

2 threshold control blocks

2 logic control blocks

3 variable selectors

brake logic control block

Programmable I/O terminals

Internal energy meter for calculating energy savings

Low DC voltage operation mode (380-480V products

can function on 220V incoming power supply )

Stop mode can be controlled when power is off

AVR

Switching frequency auto adjustment to prevent overtemp Catch spinning motor function

Injection braking

Skip frequency function

Configurable keypad disconnect faultPowerful electronic potentiometer function to adjust

reference digitallyStandard serial comms. and optional fieldbus Comprehensive protection functions:

Fast output short detection and protection Overcurrent & Overload protectionOvervoltage & Undervoltage protectionPhase loss detection and protection

Overtemp (heatsink and IGBT junction) detection Auxilliary external tripMotor thermal protection

Selectable warning display16 preset speeds (selected via control terminals) PID control

User defined V/F curves:

3 point line setting

1.2 law curve

1.7 law curve

2.0 law curve

Automatic sleep mode

Textile function

Pulse counting

Length control

Frequency （f）

Time （t）

Preset textile frequency

P14.03

Low limit of textile frequency

Centre of textile frequency

P14.02

High limit Of textile frequency

Jump frequencyAw*P14.06

Run time of preset textile frequency

P14.04

Ⅰ

Triangle rise timeP14.07*P14.08

Textile periodP14.07

+Aw

-AwⅠ

Ⅱ

Ⅱ

Run

Pause textileP14.09

Stop

Textile profile running curve

V/F curve multi section setting

F1 F2 F3 Fb Frequency Hz

V1

V2

V3

Voltage %

V1～V3: Multi section VF the 1～3 section voltage percentage

F1～F3: Multi section VF the 1～3 section frequency points

100%

Product OverviewControl logic diagram helps user understand and set parameters.

f1

f2

f3

f4

f14

f15

f16

Run

Frequency（f）

Time（t）

f1

f2

f3

f4

f14

f15f16

f1

f2

f3

f4

f14

f5~f13 f5~f13 f5~f13

Stop

The second cycleThe first cycle

16 speed profile running

Output voltage

Output frequency

Vmax

fb

0

3

2

1

Motor V/F curve

PID controller overview diagram

Analog inputs and outputs overview diagram

RPM750 AC Drive

Preset speed

0mA-20mA

P08.02 (AI1 Mode)

20mA-0mA

4mA-20mA (With trip)


Preset speed4mA-20mA

20mA-4mA

0-10V (6)

(5)

(4)

(3)

(2)

(1)

(0)

P08.17 (AI1 level)Shows the level of AI1

P08.05 (AI1 scaling)

Used to scale AI1

P08.06 (AI1 invert)

AI1 signal invert

P08.03 (AI1 function select)

This parameter is used to decide the function of AI1

P08.01 (AI function level control)

Basic range

Can be set to extended

group parameters

(1)

(0)

Preset speed

Speed control

Torque control

Torque offset (2)

(1)

(0)

Preset speedP1.01 - P15.22

P08.18(AI2 level)Shows the level of AI2

P08.10(AI2 scaling)

Used to scale AI2

P08.11 (AI2 invert)

AI2 signal invert


Used to decide the function of AI2


Basic range


group parameters

(1)

(0)

Preset speed

Speed control

Torque control

Torque offset (2)

(1)

(0)


P08.09(AI2 offset)

Offset applied to AI2 signal

P08.04(AI1 offset)


P08.19(AO1 level)Shows the

level of AO1

P08.15(AO1 scaling)

Used to scale AO1

Preset speed

Output freq

P08.14 (AO1 function select)

Ref freq

Tor prod I

Output current

Preset speedMotor speed

DC bus voltage

Output voltage(6)

(5)

(4)

(3)

(2)

(1)

(0)

AI1 level

Preset speedAI2 level

Lengh

Counting (10)

(9)

(8)

(7)

P1.01 - P15.22

P08.13(AO function level control)

Basic range


group parameters

(1)

(0)

AO1

AI1

AI2

P08.20(AI1 Upper limit)

P08.21 (AI1 Lower limit)

Error

P15.07 (PID enable)

OFF

On (1)

(0)

P12.01 (Drive healthy)

Not healthy

Healthy (1)

(0)

P1.01 - P15.22

P15.02 (PID feedback) P15.20

(PID feedback level)

Displayed in %

P15.05 (PID feedback invert)

Not inverted

Inverted (1)

(0)

P1.01 - P15.22

P15.01 (PID reference)

P15.19 (PID ref level)Displayed in %

P15.04 (PID reference invert)

Not inverted

Invert (1)

(0) P15.21 (PID error level)Displayed in %

roportional

ntegral

erivative

P

I

DP15.11

P15.10

P15.09

+

+

+ P15.22 (PID

output level)Displayed in %

P15.14 (PID output

scaling) P1.01 - P15.22

P15.15(PID output function)

P1.01 - P15.22

P15.03 (PID feed forward reference)

+

++

-

P15.12(Max Output)

P15.13(Min Output)

P15.18(PID feed forward

ref level)Displayed in %

P15.16 (PID integrator hold)

OFF

On (1)

(0)

P10.21 (PID output freeze)

OFFOn

(1)

(0)

Logic Diagram

3 4

Functions and Featuresn

n

l

l

l

l

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

l

l

l

l

n

n

n

n

Balance of powerful functionality and ease of use. Powerful platform makes user programming easierBuilt-in advanced function blocks:




brake logic control block

Programmable I/O terminals

Internal energy meter for calculating energy savings

Low DC voltage operation mode (380-480V products can

funtion on 220V incoming power supply )

Stop mode can be controlled when power is off

AVR

Switching frequency auto adjustment to prevent overtempCatch spinning motor function

Injection braking

Skip frequency function

Configurable keypad disconnect faultPowerful electronic potentiometer function to adjust

reference digitallyStandard serial comms. and optional fieldbus Comprehensive protection functions:

Fast output short detection and protection Overcurrent & Overload protectionOvervoltage & Undervoltage protectionPhase loss detection and protection

Overtemp (heatsink and IGBT junction) detection Auxilliary external tripMotor thermal protection

Selectable warning display16 preset speeds (selected via control terminals) PID control

User defined V/F curves:

3 point line setting

1.2 law curve

1.7 law curve

2.0 law curve

Automatic sleep mode

Textile function

Pulse counting

Length control

Frequency （f）

Time （t）

Preset textile frequency

P14.03

Low limit of textile frequency

Centre of textile frequency

P14.02

High limit Of textile frequency

Jump frequencyAw*P14.06

Run time of preset textile frequency

P14.04

Ⅰ

Triangle rise timeP14.07*P14.08

Textile periodP14.07

+Aw

-AwⅠ

Ⅱ

Ⅱ

Run

Pause textileP14.09

Stop

Textile profile running curve

V/F curve multi section setting

F1 F2 F3 Fb Frequency Hz

V1

V2

V3

Voltage %

V1～V3: Multi section VF the 1～3 section voltage percentage

F1～F3: Multi section VF the 1～3 section frequency points

100%

Product OverviewControl logic diagram helps user understand and set parameters.

f1

f2

f3

f4

f14

f15

f16

Run

Frequency（f）

Time（t）

f1

f2

f3

f4

f14

f15f16

f1

f2

f3

f4

f14

f5~f13 f5~f13 f5~f13

Stop

The second cycleThe first cycle

16 speed profile running

Output voltage

Output frequency

Vmax

fb

0

3

2

1

Motor V/F curve

PID controller overview diagram

Analog inputs and outputs overview diagram

RPM750 AC Drive

Preset speed

0mA-20mA

P08.02 (AI1 Mode)

20mA-0mA



Preset speed4mA-20mA

20mA-4mA

0-10V (6)

(5)

(4)

(3)

(2)

(1)

(0)

P08.17 (AI1 level)Shows the level of AI1

P08.05 (AI1 scaling)

Used to scale AI1

P08.06 (AI1 invert)

AI1 signal invert


This parameter is used to decide the function of AI1


Basic range


group parameters

(1)

(0)

Preset speed

Speed control

Torque control

Torque offset (2)

(1)

(0)


P08.18(AI2 level)Shows the level of AI2

P08.10(AI2 scaling)

Used to scale AI2

P08.11 (AI2 invert)

AI2 signal invert


Used to decide the function of AI2


Basic range


group parameters

(1)

(0)

Preset speed

Speed control

Torque control

Torque offset (2)

(1)

(0)


P08.09(AI2 offset)


P08.04(AI1 offset)


P08.19(AO1 level)Shows the

level of AO1

P08.15(AO1 scaling)

Used to scale AO1

Preset speed

Output freq

P08.14 (AO1 function select)

Ref freq

Tor prod I

Output current

Preset speedMotor speed

DC bus voltage

Output voltage(6)

(5)

(4)

(3)

(2)

(1)

(0)

AI1 level

Preset speedAI2 level

Lengh

Counting (10)

(9)

(8)

(7)

P1.01 - P15.22

P08.13(AO function level control)

Basic range


group parameters

(1)

(0)

AO1

AI1

AI2

P08.20(AI1 Upper limit)

P08.21 (AI1 Lower limit)

Error

P15.07 (PID enable)

OFF

On (1)

(0)

P12.01 (Drive healthy)

Not healthy

Healthy (1)

(0)

P1.01 - P15.22

P15.02 (PID feedback) P15.20

(PID feedback level)

Displayed in %

P15.05 (PID feedback invert)

Not inverted

Inverted (1)

(0)

P1.01 - P15.22

P15.01 (PID reference)

P15.19 (PID ref level)Displayed in %

P15.04 (PID reference invert)

Not inverted

Invert (1)

(0) P15.21 (PID error level)Displayed in %

roportional

ntegral

erivative

P

I

DP15.11

P15.10

P15.09

+

+

+ P15.22 (PID

output level)Displayed in %

P15.14 (PID output

scaling) P1.01 - P15.22

P15.15(PID output function)

P1.01 - P15.22

P15.03 (PID feed forward reference)

+

++

-

P15.12(Max Output)

P15.13(Min Output)

P15.18(PID feed forward

ref level)Displayed in %

P15.16 (PID integrator hold)

OFF

On (1)

(0)

P10.21 (PID output freeze)

OFFOn

(1)

(0)

General Technical Data

Input power

Input voltage Vin

200V (– ) 240V (+ ) 1/3 PH

380V (–10%)～480V (+10%) 3PH

500V (–10%)～690V (+10%) 3PH

10% ～ 10%

Input frequency 50Hz/60Hz(±2Hz)

Maximum supply imbalance

≤3%

Power outputOutput voltage 0V～Vin

Output frequency 0Hz～300Hz

Performance specifications

Voltage control V/F, Sensorless Vector Control

Switching frequency 1kHz～15kHz

Speed range Sensorless vector control -1:100, V/F mode -1:50

Starting torque 0.5Hz: 100% rated torque


Torque accuracy 5%

Reference resolution Digital- 0.01Hz, Analog- 0.1%×Maximum frequency

Accel. & Decel. rate 0.1s～3600min

Voltage boost 0.1 30.0%～ %

OverloadE & G type: 150% rated output current for 1 minute P type: 110% rated output current for 1 minute

V/F 4 types: V/F (user programmable) and ramp (2.0 power, 1.7 power, 1.2 power)

DC injectionInjection frequency: 0.0% 0.0% maximum frequency

Injection current: 0.0%～300.0% rated current

Injection time: 0.00s～60.00s

～10

Dynamic braking Dynamic braking utilization rate: 0.0%～100.0%

JogJog frequency: 0.00Hz maximum frequency

Jog acceleration rate: 0.1s～600.0s

Jog interval time: 0.1s～600.0s

～

Preset 16 preset speeds (determined via control terminals)

AVR Maintains rated output voltage when the input power supply voltage changes

Special function

Textile Textile machine control

Simple PLC Onboard PLC and speed profile

Length control Winding control

PID control Process control (reference closed loop control)

Advanced function blocks


1 binary selector



5 6

Control terminal

Reference sourceDigit: Keypad, motorized pot (E-Pot), pulse, comms.

Analog: AI1: 0V 10V, 0(4) mA～20mA;

AI2: 0V～10V

～

Operating mode Keypad, Control terminal, Serial comms.

Digital input terminals

DI1 DI7: Programmable terminals use DI6 as pulse input, 0Hz～60Hz; Use DI7 forhigh frequency pulse input (1Hz～50.0kHz) or PTC thermistor input

～

Digital output terminals

DO1 DO2: Programmable terminals, Max. output current: 50mA, Use DO2 for providing

output pulse ( 0.1kHz～50.0kHz ), and output PWM

～

Analog output Terminals

A 1: programmable terminal, 0V 10VO ～

Status relay

2 programmable relays, contactor data: AC250V/2A (resistive load)

AC250V/1A (inductive load)

DC30V/1A

Comms.Connector 2 terminals (A&B) and RJ45 port

Protocol Modbus RTU

Environment

Altitude1000m rated

1000m～3000m, derate current 1% per 100m

Operating temperature

−10℃～+40℃

Maximum humidity < 90% relative humidity, non-condensing

Vibration 2 ≤5.9m/s (0.6g)

Storage temperature

− +40℃～ 70℃

Running environment

Indoor, non-flammable, non corrosive, free from electrically conductive material,

keep fan unrestricted

Optional modulesLCD Keypad, HDOM-232, HDOM-USB, Profibus module, Keypad pallet, HDSOFT (PCTools),

etc.

ProtectionOutput short, overcurrent, overload, overvoltage, undervoltage, phase loss, overtemp

(heatsink and junction), external trip, etc.

Efficiency1.5kW and below: 89%

2.2kW～22kW: ≥93%

30kW and above: ≥95%

≥

Mounting method Surface mounting, through hole, cubicle standing

Enclosure IP 20, IP21 (by adding optional device)

Cooling method 220V/ 0.4kW model is convection cooled, all others are forced air cooled


RPM750 AC Drive

FLASH test platformDT test platform PCBA ATE test platform


Input power

Input voltage Vin

200V (– ) 240V (+ ) 1/3 PH

380V (–10%)～480V (+10%) 3PH

500V (–10%)～690V (+10%) 3PH

10% ～ 10%

Input frequency 50Hz/60Hz(±2Hz)

Maximum supply imbalance

≤3%

Power outputOutput voltage 0V～Vin

Output frequency 0Hz～300Hz

Main performance function

Voltage control V/F, Open loop Vector Control

Switching frequency 1kHz～15kHz

Speed range Open loop vector control -1:100, V/F mode -1:50

Starting torque 0.5Hz: 100% rated torque


Torque accuracy 5%

Reference resolution Digital- 0.01Hz, Analog- 0.1%×Maximum frequency

Accel. & Decel. rate 0.1s～3600min

Voltage boost 0.1 30.0%～ %

OverloadE & G type: 150% rated output current for 1 minute P type: 110% rated output current for 1 minute

V/F 4 types: V/F (user programmable) and ramp (2.0 power, 1.7 power, 1.2 power)

DC injectionInjection frequency: 0.0% 0.0% maximum frequency

Injection current: 0.0%～300.0% rated current

Injection time: 0.00s～60.00s

～10

Dynamic braking Dynamic braking utilization rate: 0.0%～100.0%

JogJog frequency: 0.00Hz maximum frequency

Jog acceleration rate: 0.1s～600.0s

Jog interval time: 0.1s～600.0s

～

Preset 16 preset speeds (determined via control terminals)

AVR Maintains rated output voltage when the input power supply voltage changes

Special function

Textile Textile machine control

Simple PLC Onboard PLC and speed profile

Length control Winding control

PID control Process control (reference closed loop control)

Advanced function blocks


1 binary selector



5 6

Control terminal

Reference sourceDigit: Keypad, motorized pot (E-Pot), pulse, comms.

Analog: AI1: 0V 10V, 0(4) mA～20mA;

AI2: 0V～10V

～

Operating mode Keypad, Control terminal, Serial comms.

Digital input terminals

DI1 DI7: Programmable terminals use DI6 as pulse input, 0Hz～60Hz; Use DI7 forhigh frequency pulse input (1Hz～50.0kHz) or PTC thermistor input

～

Digital output terminals

DO1 DO2: Programmable terminals, Max. output current: 50mA, Use DO2 for providing

output pulse ( 0.1kHz～50.0kHz ), and output PWM

～

Analog output Terminals

A 1: programmable terminal, 0V 10VO ～

Status relay

2 programmable relays, contactor data: AC250V/2A (resistive load)

AC250V/1A (inductive load)

DC30V/1A

Comms.Connector 2 terminals (A&B) and RJ45 port

Protocol Modbus　RTU

Environment

Altitude1000m rated

1000m～3000m, derate current 1% per 100m

Operating temperature

−10℃～+40℃

Maximum humidity < 90% relative humidity, non-condensing

Vibration 2 ≤5.9m/s (0.6g)

Storage temperature

− +40℃～ 70℃

Running environment

Indoor, non-flammable, non corrosive, free from electrically conductive material,

keep fan unrestricted

Optional modulesLCD Keypad, RPM-232, RPM-USB, Profibus module, Keypad adapter, RPMSoft (PCTools),

etc.

ProtectionOutput short, overcurrent, overload, overvoltage, undervoltage, phase loss, overtemp

(heatsink and junction), external trip, etc.

Efficiency1.5kW and below: 89%

2.2kW～22kW: ≥93%

30kW and above: ≥95%

≥

Mounting method Surface mounting, through hole, cubicle standing

Enclosure IP 20, IP21 (by adding optional device)

Cooling method 220V/ 0.4kW model is convection cooled, all others are forced air cooled


RPM750 AC Drive

220V Rating Data Power supply: 200Vac～240Vac +/-10%, 50Hz/60Hz, single/three phase

Model Name Default Carrier Frequency (kHz)

Drive Power Size kVA)(

Rated Input Current A( ) Rated Output Current A( )

Motor Power (HP) Size

1/3PHRPM750-20D00028 6 1.1 7.1/ 4 2.8 0.5 ARPM750-20D00050 6 1.9 12.8/ 7.1 5 1.0 ARPM750-20D00080 6 3.0 20.5/ 11.3 8 2.0 ARPM750-20D00110 6 4.2 24/ 14.5 11 3.0 BRPM750-20T00176 6 6.7 16.5 17.6 5 C

7 8

480V Rating Data690V Rating Data

Model Reference 480V Rating Data RPM750 - 4 0 T 0095

Heavy Duty Rated Amps

0095: 9.5 Amps

Input phaseD: 1/3PHT: 3PH

Family

Supply voltage2: 220V4: 380V-480V6: 690V

Brake IGBT0: Internally fitted1: None

Blank: standard G type E: reduced frame size G type P: reduced frame size P type

RPM750 AC Drive

Power supply: 380Vac～480Vac +/-10%, 50Hz/60Hz, three phase

Model NameDefault Carrier

Frequency (KHz)

G P

SizeDrive Power Size(kVA)

Rated Input

Current(A)

Rated Output Current

(A)

Motor Power(HP)

Drive Power Size(kVA)

Rated Input

Current(A)


(A)

Motor Power(HP)

RPM750-40T00025 6 1.7 3.6 2.5 1.0 − − − − ARPM750-40T00042 6 2.8 5.7 4.2 2.0 − − − − ARPM750-40T00052E 6 3.4 6.1 5.2 3.0 − − − − ARPM750-40T00058 6 3.8 8.3 5.8 3.0 − − − − BRPM750-40T00095 6 6.3 13.2 9.5 5.0 − − − − BRPM750-40T00130E 6 8.6 14.3 13 7.5 − − − − BRPM750-40T00130P 6 − − − − 8.6 14.3 13 7.5 BRPM750-40T00130 6 8.6 12.4 13 7.5 − − − − CRPM750-40T00170 6 11 16.1 17 10 − − − − CRPM750-40T00230P 6 − − − − 15.2 21 23 15 CRPM750-40T00250 6 16.5 24 25 15 21 31 32 20 DRPM750-40T00320 6 21 31 32 20 25 36 38 25 DRPM750-40T00380 6 25 36 38 25 30 44 46 30 ERPM750-40T00460 6 30 44 46 30 40 58 60 40 ERPM750-40T00600E 3 40 58 60 40 50 72 75 50 E1RPM750-40T00750E 3 50 72 75 50 − − − − E1RPM750-40T00600 3 40 58 60 40 50 72 75 50 FRPM750-40T00750 3 50 72 75 50 63 93 96 60 F



Frequency (KHz)

G P


Rated Input

Current(A)


(A)

Motor Power(HP)


Rated Input

Current(A)


(A)

Motor Power(HP)

RPM750-40T00960 3 63 93 96 60 83 121 125 75 FRPM750-40T01250 3 83 121 125 75 103 151 156 100 FRPM750-40T01560 3 103 151 156 100 119 175 180 125 FRPM750-40T01800 3 119 175 180 125 139 204 210 150 GRPM750-40T02100 3 139 204 210 150 169 248 256 200 GRPM750-40T02560 3 169 248 256 200 205 301 310 250 GRPM750-40T03100E 3 205 301 310 250 231 340 350 250 JRPM750-40T03500E 3 231 340 350 250 255 375 387 300 JRPM750-40T03870E 3 255 375 387 300 280 415 427 350 JRPM750-40T03100 3 205 301 310 250 231 340 350 250 KRPM750-40T03500 3 231 340 350 250 255 375 387 300 KRPM750-40T03870 3 255 375 387 300 310 4 75 4 17 350 KRPM750-40T04710 3 310 4 75 4 17 350 343 505 5 02 400 KRPM750-40T05200 3 343 505 5 02 400 403 592 610 500 KRPM750-40T06100 2 403 592 610 500 444 653 673 550 LRPM750-40T06730 2 444 653 673 550 495 728 750 600 LRPM750-40T07500 2 495 728 750 600 551 810 835 700 LRPM750-40T08350 2 551 810 835 700 622 915 943 800 L

Power supply: 500Vac 690Vac, 50Hz/60Hz, three phase～


Frequency (KHz)

G P


Rated Input

Current(A)


(A)

Motor Power(HP)




(A)

Motor Power(HP)

RPM750-60T00360 3 43 36 36 30 51 49 51 37 FRPM750-60T00510 3 61 49 51 37 65 52 54 45 FRPM750-60T00540 3 65 52 54 45 75 61 63 55 FRPM750-60T00630 3 75 61 63 55 103 83 86 75 FRPM750-60T00860 3 103 83 86 75 120 97 100 90 FRPM750-60T01000 3 120 97 100 90 157 127 131 110 GRPM750-60T01310 3 157 127 131 110 179 145 150 132 GRPM750-60T01500 3 179 145 150 132 209 170 175 160 GRPM750-60T01750E 3 209 170 175 160 237 192 198 185 JRPM750-60T01980E 3 237 192 198 185 276 224 231 200 JRPM750-60T02310EE

3 276 224 231 200 296 235 248 220 JRPPM750-60T01750 3 209 170 175 160 237 192 198 185 KRPM750-60T01980 3 237 192 198 185 276 224 231 200 KRPM750-60T02310 3 276 224 231 200 327 266 274 250 KRPM750-60T02740 3 327 266 274 250 350 285 293 280 KRPM750-60T02930 3 350 285 293 280 392 318 328 315 KRPM750-60T03280 2 392 318 328 315 462 375 387 355 LRPM750-60T03870 2 462 375 387 355 509 413 426 400 LRPM750-60T04260 2 509 413 426 400 576 468 482 450 LRPM750-60T04820 2 576 468 482 450 651 529 545 500 L

Power size of RPM750 refers to a standard 4 pole induction motor at rated voltage. E & G: Heavy duty P: Normal duty Overload of E & G type: 150% rated output current, 1 minute Overload of P type: 110% rated output current, 1 minute

220V Rating Data Power supply: 200Vac～240Vac +/-10%, 50Hz/60Hz, single/three phase

Model Name Default Carrier Frequency (kHz)

Drive Power Size kVA)(

Rated Input Current A( ) Rated Output Current A( )

Motor Power (HP) Size

1/3PHRPM750-20D00028 6 1.1 7.1/ 4 2.8 0.5 ARPM750-20D00050 6 1.9 12.8/ 7.1 5 1.0 ARPM750-20D00080 6 3.0 20.5/ 11.3 8 2.0 ARPM750-20D00110 6 4.2 24/ 14.5 11 3.0 BRPM750-20T00176 6 6.7 16.5 17.6 5 C

7 8

480V Rating Data 690V Rating Data

Model Reference 480V Rating DataRPM750 - 4 0 T 0095

Heavy Duty Rated Amps

0095: 9.5 Amps

Input phaseD: 1/3PHT: 3PH

Family

Supply voltage2: 220V4: 380V-480V6: 690V

Brake IGBT0: Internal fitted1: None

Blank: standard G typeE: reduced frame size G type P: reduced frame size P type

RPM750 AC Drive



Frequency (KHz)

G P


Rated Input

Current(A)


(A)

Motor Power(HP)


Rated Input

Current(A)


(A)

Motor Power(HP)

RPM750-40T00025 6 1.7 3.6 2.5 1.0 − − − − ARPM750-40T00042 6 2.8 5.7 4.2 2.0 − − − − ARPM750-40T00052E 6 3.4 6.1 5.2 3.0 − − − − ARPM750-40T00058 6 3.8 8.3 5.8 3.0 − − − − BRPM750-40T00095 6 6.3 13.2 9.5 5.0 − − − − BRPM750-40T00130E 6 8.6 14.3 13 7.5 − − − − BRPM750-40T00130P 6 − − − − 8.6 14.3 13 7.5 BRPM750-40T00130 6 8.6 12.4 13 7.5 − − − − CRPM750-40T00170 6 11 16.1 17 10 − − − − CRPM750-40T00230P 6 − − − − 15.2 21 23 15 CRPM750-40T00250 6 16.5 24 25 15 21 31 32 20 DRPM750-40T00320 6 21 31 32 20 25 36 38 25 DRPM750-40T00380 6 25 36 38 25 30 44 46 30 ERPM750-40T00460 6 30 44 46 30 40 58 60 40 ERPM750-40T00600E 3 40 58 60 40 50 72 75 50 E1RPM750-40T00750E 3 50 72 75 50 − − − − E1RPM750-40T00600 3 40 58 60 40 50 72 75 50 FRPM750-40T00750 3 50 72 75 50 63 93 96 60 F



Frequency (KHz)

G P


Rated Input

Current(A)


(A)

Motor Power(HP)


Rated Input

Current(A)


(A)

Motor Power(HP)

RPM750-40T00960 3 63 93 96 60 83 121 125 75 FRPM750-40T01250 3 83 121 125 75 103 151 156 100 FRPM750-40T01560 3 103 151 156 100 119 175 180 125 FRPM750-40T01800 3 119 175 180 125 139 204 210 150 GRPM750-40T02100 3 139 204 210 150 169 248 256 200 GRPM750-40T02560 3 169 248 256 200 205 301 310 250 GRPM750-40T03100E 3 205 301 310 250 231 340 350 250 JRPM750-40T03500E 3 231 340 350 250 255 375 387 300 JRPM750-40T03870E 3 255 375 387 300 280 415 427 350 JRPM750-40T03100 3 205 301 310 250 231 340 350 250 KRPM750-40T03500 3 231 340 350 250 255 375 387 300 KRPM750-40T03870 3 255 375 387 300 310 4 75 4 17 350 KRPM750-40T04710 3 310 4 75 4 17 350 343 505 5 02 400 KRPM750-40T05200 3 343 505 5 02 400 403 592 610 500 KRPM750-40T06100 2 403 592 610 500 444 653 673 550 LRPM750-40T06730 2 444 653 673 550 495 728 750 600 LRPM750-40T07500 2 495 728 750 600 551 810 835 700 LRPM750-40T08350 2 551 810 835 700 622 915 943 800 L

Power supply: 500Vac 690Vac, 50Hz/60Hz, three phase～


Frequency (KHz)

G P


Rated Input

Current(A)


(A)

Motor Power(kW)




(A)

Motor Power(kW)

RPM750-60T00360 3 43 36 36 30 51 49 51 37 FRPM750-60T00510 3 61 49 51 37 65 52 54 45 FRPM750-60T00540 3 65 52 54 45 75 61 63 55 FRPM750-60T00630 3 75 61 63 55 103 83 86 75 FRPM750-60T00860 3 103 83 86 75 120 97 100 90 FRPM750-60T01000 3 120 97 100 90 157 127 131 110 GRPM750-60T01310 3 157 127 131 110 179 145 150 132 GRPM750-60T01500 3 179 145 150 132 209 170 175 160 GRPM750-60T01750E 3 209 170 175 160 237 192 198 185 JRPM750-60T01980E 3 237 192 198 185 276 224 231 200 JRPM750-60T02310EE

3 276 224 231 200 296 235 248 220 JRPPM750-60T01750 3 209 170 175 160 237 192 198 185 KRPM750-60T01980 3 237 192 198 185 276 224 231 200 KRPM750-60T02310 3 276 224 231 200 327 266 274 250 KRPM750-60T02740 3 327 266 274 250 350 285 293 280 KRPM750-60T02930 3 350 285 293 280 392 318 328 315 KRPM750-60T03280 2 392 318 328 315 462 375 387 355 LRPM750-60T03870 2 462 375 387 355 509 413 426 400 LRPM750-60T04260 2 509 413 426 400 576 468 482 450 LRPM750-60T04820 2 576 468 482 450 651 529 545 500 L

Power size of RPM750 refers to a standard 4 pole induction motor at rated voltage. E & G: Heavy duty P: Normal duty Overload of E & G type: 150% rated output current, 1 minute Overload of P type: 110% rated output current, 1 minute

109

Mounting Dimensions Mechanical Dimensions

RPM750 AC Drive

Keypad Control

PROG. MODE

W

W1 DØ

Ø

HH1

Size A, B, C

ØW

W1D

D1

H H1

Ø

Size E1, F

WW1

W2

Ø

H H1

D

D1

Ø

Size G

D

WW1

W2

Ø

Ø

H1

H

Size D, E

Size J Size K Size L

WW1

W2

H H1

D

D1

Ø

Ø

Size Model Name W(mm)

W1(mm)

W2(mm)

H(mm)

H1(mm)

D(mm)

D1(mm)

MountingHole

Ø(mm)Weight

(kg) Comments

A

RPM750-20D00028

97.4 80 – 202.4 190 148.8 – 5 1.4 –

RPM750-20D00050RPM750-20D00080

RPM750-40T00025RPM750-40T00042RPM750-40T00052E

B

RPM750-20D00110

142.4 123.5 – 220.4 208 155.5 – 5 2.2 –

RPM750-40T00058RPM750-40T00095RPM750-40T00130E

RPM750-40T00130P

C

RPM750-20D00176

163.1 142 – 300 280 176.8 – 6 4.5 Internal DC chokeRPM750-40T00130

RPM750-40T00170

RPM750-40T00230P

DRPM750-40T00250

238.5 184 92 370 356.5 189 – 7 8.8 Internal DC chokeRPM750-40T00320

ERPM750-40T00380

238.5 184 92 435.5 422 200.3 – 7 12.1 Internal DC chokeRPM750-40T00460

E1RPM750-40T00600E

320 210 – 510 490 226 222.5 8 20 –RPM750-40T00750E

F

RPM750-40T00600

355.5 221 – 573 552.5 315.5 310 10 40

Internal DC choke

RPM750-40T00750 Internal DC choke


RPM750-40T01250 External DC choke







G

RPM750-40T01800

445.6 340 170 725 701.5 355 349.5 10 63 External DC choke

RPM750-40T02100

RPM750-40T02560

RPM750-60T01000

RPM750-60T01310

RPM750-60T01500

J

RPM750-40T03100E

575.5 440 220 937 889 379.3 373.8 13 104 External DC choke

RPM750-40T03500E

RPM750-40T03870E

RPM750-60T01750ERPM750-60T01980ERPM750-60T02310E

K

RPM750-40T03100

640 520 175 1246.5 1207.5 405.5 400 13 150 External DC choke

RPM750-40T03500

RPM750-40T03870

RPM750-40T04710RPM750-40T05200

RPM750-60T01750

RPM750-60T01980

RPM750-60T02310

RPM750-60T02740

RPM750-60T02930

H

W D

WW1

W2

D

D1

H H1

Ø

Ø

109

Mounting Dimensions Mechanical Dimensions

RPM750 AC Drive

Keypad Control

PROG. MODE

W

W1 DØ

Ø

HH1

Size A, B, C

ØW

W1D

D1

H H1

Ø

Size E1, F

WW1

W2

Ø

H H1

D

D1

Ø

Size G

D

WW1

W2

Ø

Ø

H1

H

Size D, E

Size J Size K Size L

WW1

W2

H H1

D

D1

Ø

Ø


W1(mm)

W2(mm)

H(mm)

H1(mm)

D(mm)

D1(mm)

MountingHole

Ø(mm)Weight

(kg) Comments

A

RPM750-20D00028

97.4 80 – 202.4 190 148.8 – 5 1.4 –

RPM750-20D00050RPM750-20D00080

RPM750-40T00025RPM750-40T00042RPM750-40T00052E

B

RPM750-20D00110

142.4 123.5 – 220.4 208 155.5 – 5 2.2 –

RPM750-40T00058RPM750-40T00095RPM750-40T00130E

RPM750-40T00130P

C

RPM750-20D00176

163.1 142 – 300 280 176.8 – 6 4.5 Internal DC chokeRPM750-40T00130

RPM750-40T00170

RPM750-40T00230P

DRPM750-40T00250

238.5 184 92 370 356.5 189 – 7 8.8 Internal DC chokeRPM750-40T00320

ERPM750-40T00380

238.5 184 92 435.5 422 200.3 – 7 12.1 Internal DC chokeRPM750-40T00460

E1RPM750-40T00600E

320 210 – 510 490 226 222.5 8 20 –RPM750-40T00750E

F

RPM750-40T00600

355.5 221 – 573 552.5 315.5 310 10 40

Internal DC choke










G

RPM750-40T01800

445.6 340 170 725 701.5 355 349.5 10 63 External DC choke

RPM750-40T02100

RPM750-40T02560

RPM750-60T01000

RPM750-60T01310

RPM750-60T01500

J

RPM750-40T03100E

575.5 440 220 937 889 379.3 373.8 13 104 External DC choke

RPM750-40T03500E

RPM750-40T03870E

RPM750-60T01750ERPM750-60T01980ERPM750-60T02310E

K

RPM750-40T03100

640 520 175 1246.5 1207.5 405.5 400 13 150 External DC choke

RPM750-40T03500

RPM750-40T03870

RPM750-40T04710RPM750-40T05200

RPM750-60T01750

RPM750-60T01980

RPM750-60T02310

RPM750-60T02740

RPM750-60T02930

H

W D

WW1

W2

D

D1

H H1

Ø

Ø

Typical Wiring

PE

Drive fault +24V

L3

FWD

REV

Jog WD

Preset select bit0

Preset select bit1

DI1

DI2

DI3

DI4

DI5

DI6

DI7

0V

+10V

AI2

AI1

0V

0V～10V

M

AO1

0V

Output frequency Analog output 0V～10V

DO1

DO2

0V

Zero apeed +24V

RL1

RL2

RL3

RL4

L1

L2

L3/N

U

V

W

24V User +24V

+DC +DC1 - DCBR

DC choke

Motor

CN3

CN2

Keypad connector

Option connector

Coast Stop

Reset

Common

PEPE

RPM750

Supply1/3 PH

AB

485 terminals

RJ45 port

Healthy= closed

Drive active= closed

Brake resistor

Pro

gra

mm

able

L1

L2

0V～10V/0(4)mA～20mA

Note:

n All the programmable control terminal functions are factory default set;

n For analog control wire use shielded cable or shielded twisted pair;

n 5.5kW～ 280kW models (including 220V/4kW, except size E1 models), internal DC choke is fitted. 315kW～ 450kW

models with AC reactor fitted.

11 12

RPM750 AC Drive

Control Terminals

RL3 RL4 DO224VAI20V DI4 DI5 BADI7DI6

RL1 RL2 AO110VAI10V DO1 24V DI3DI2DI10V

RS485

Control Terminal Diagram

Control TerminalsAnd Communication PortType Terminal Name Function Technical Specification

Serial comms.

RS485 RJ45 port Two lines, Modbus RTU protocol

A 485 plus signalSame function with RJ45 port, mainly for multi network

B 485 minus signal

Digit input

DI1 DI5～Programmable digital input terminals

Active can be 0V or 24V by setting the P09.21 (default is 0V) Input resistance: 10kΩHigh logic threshold: 10V±1VSample time: 1ms

DI6Dedicated digital input Length counting Number counting

l Same as DI1 DI5l Length counting by input pulse Sample time: 5msl Number counting by input pulse Sample time: 5msNote: pulse frequency range is 0Hz～60Hz

～

DI7Dedicated digital inputHigh frequency pulse input Motor thermister input

l Same as DI1~DI5 Except Input resistance is 5k l High frequency pulse input Frequency range: 1kHz～50kHz l Program P09.21=1 for thermister input

Trip resistance: 3kΩ Reset resistance: 1.8kΩ Sample time: 5ms

Ω

Digital output

DO1Programmable digital output terminal 1

Output: 24V/0VMaximum output current: 50mA Update rate: 20ms


l Same as DO1l High frequency pulse output (0.1kHz～50kHz) l PWM output (10kHz)

Analog input & output

AI1Programmable analog input1

0V 10V, Input resistance: 100k , 0 (4) mA 20mALoad resistance:188Ω, Minimum potentiometer resistance: 0.5kΩResolution: 0.1%, Accuracy: 2%, Sampling period: 5ms

～ Ω ～


0V 10V, Input resistance: 30kMinimum potentiometer resistance: 0.5kΩResolution: 0.1%, Accuracy: 2%Sampling period: 5ms

～ Ω

AO1Programmable analog output

0V 10V, Maximum output current: 5mA, Resolution: 0.4%Accuracy: ±5%, Update rate: 5ms

～

Power supply & Relay

10V Analog reference +10V Accuracy: 2%, Maximum output current: 20mA

24V User supply (2) Accuracy: ±15%, Maximum output current: 100mA

0V Common (3) Common reference point for control signals

RL1 RL2，Programmable Relay1 output contact

Type: normally open Update rate: 5msContact rating:250VAC/2A(resistive); 250VAC/1A(inductive); 30VDC/1A Default:Relay1: closed when powered and healthyRelay2: closed when drive is active



W1(mm)

W2(mm)

H(mm)

H1(mm)

D(mm)

D1(mm)

MountingHole

Ø(mm)Weight

(kg) Comments

L

RPM750-40T06100

804 – – 2200 – 804 – – 350 Internal AC choke

RPM750-40T06730

RPM750-40T07500

RPM750-40T08350

RPM750-60T03280

RPM750-60T03870RPM750-60T04260

RPM750-60T04820

Mechanical Dimensions

Typical Wiring

PE

Drive fault +24V

L3

FWD

REV

Jog WD

Preset select bit0

Preset select bit1

DI1

DI2

DI3

DI4

DI5

DI6

DI7

0V

+10V

AI2

AI1

0V

0V～10V

M

AO1

0V

Output frequency Analog output 0V～10V

DO1

DO2

0V

Zero apeed +24V

RL1

RL2

RL3

RL4

L1

L2

L3/N

U

V

W

24V User +24V

+DC +DC1 - DCBR

DC choke

Motor

CN3

CN2

Keypad connector

Option connector

Coast Stop

Reset

Common

PEPE

RPM750

Supply1/3 PH

AB

485 terminals

RJ45 port

Healthy= closed

Drive active= closed

Brake resistor

Pro

gra

mm

able

L1

L2

0V～10V/0(4)mA～20mA

Note:

n All the programmable control terminal functions are factory default set;

n For analog control wire use shielded cable or shielded twisted pair;

n 5.5kW～ 280kW models (including 220V/4kW, except size E1 models), internal DC choke is fitted. 315kW～ 450kW

models with AC reactor fitted.

11 12

RPM750 AC Drive

Control Terminals

RL3 RL4 DO224VAI20V DI4 DI5 BADI7DI6

RL1 RL2 AO110VAI10V DO1 24V DI3DI2DI10V

RS485

Control Terminal Diagram

Control Terminals And Communication PortType Terminal Name Function Technical Specification

Serial comms.

RS485 RJ45 port Two lines, Modbus RTU protocol

A 485 plus signalSame function with RJ45 port, mainly for multi network

B 485 minus signal

Digit inputs

DI1 DI5～Programmable digital input terminals

Active logic level can be 0V or 24V by setting the P09.21 (default is 0V) Input resistance: 10kΩHigh logic threshold: 10V±1VSample time: 1ms

DI6Dedicated digital input Length counting Number counting

l Same as DI1 DI5l Length counting by input pulse Sample time: 5msl Number counting by input pulse Sample time: 5msNote: pulse frequency range is 0Hz～60Hz

～

DI7Dedicated digital inputHigh frequency pulse input Motor thermister input

l Same as DI1~DI5 Except Input resistance is 5k l High frequency pulse input Frequency range: 1kHz～50kHz l Program P09.21=1 for thermister input Trip resistance: 3kΩ Reset resistance: 1.8kΩ Sample time: 5ms

Ω

Digital output


Output: 24V/0VMaximum output current: 50mA Update rate: 20ms


l Same as DO1l High frequency pulse output (0.1kHz～50kHz) l PWM output (10kHz)

Analog input & output


0V 10V, Input resistance: 100k , 0 (4) mA 20mALoad resistance:188Ω, Minimum potentiometer resistance: 0.5kΩResolution: 0.1%, Accuracy: 2%, Sampling period: 5ms

～ Ω ～


0V 10V, Input resistance: 30kMinimum potentiometer resistance: 0.5kΩResolution: 0.1%, Accuracy: 2%Sampling period: 5ms

～ Ω

AO1Programmable analog output

0V 10V, Maximum output current: 5mA, Resolution: 0.4%Accuracy: ±5%, Update rate: 5ms

～

Power supply & Relay

10V Analog reference +10V Accuracy: 2%, Maximum output current: 20mA

24V User supply (2) Accuracy: ±15%, Maximum output current: 100mA

0V Common (3) Common reference point for control signals


Type: normally open Update rate: 5msContact rating:250VAC/2A(resistive); 250VAC/1A(inductive); 30VDC/1A Default:Relay1: closed when powered and healthyRelay2: closed when drive is active



W1(mm)

W2(mm)

H(mm)

H1(mm)

D(mm)

D1(mm)

MountingHole

Ø(mm)Weight

(kg) Comments

L

RPM750-40T06100

804 – – 2200 – 804 – – 350 Internal AC choke

RPM750-40T06730

RPM750-40T07500

RPM750-40T08350

RPM750-60T03280

RPM750-60T03870RPM750-60T04260

RPM750-60T04820

Mechanical Dimensions

13 14

Service Items1. Warranty exchange service

2. Field maintenance or Repair/Return3. Spare parts supply services4. Technical support via phone or email5. Expert on site technical support service

6. Industry system solutions support

7. Professional technical training

Options

RPM750 AC Drive

Quality Assurance & Reliability (CE/UL Certification)

E348255

LCD keypad Remote keypad Profibus module Keypad adapter

RPM-232 RPM-USB RPMSOFT (PCTools) RPM-IO-Logic

Note: If there is a conflict with parameter content, pressing the key will not allow advancing to the next parameter.

Keys Function Description

In any display level, pressing the ESC key will return to the previous level. Holding the key will display the value

odisplay parameter determined by P05.01. When the Keypad is locked, holding the ESC key for 5 seconds will unlock.

Programmable key, it can function as Jog, Fwd./Rev., or coast stop by setting P05.07. Default function is jog.

Enter next level of the keypad display.

When in keypad control mode (P00.03 or P10.07=0), pressing this key will initiate drive run.

This key will stop the drive unless the keypad is locked. Resets drive faults unless locked.

INC/DEC: Used to select parameters and edit their values. In keypad run mode, they are used to

increase and decrease the speed of the motor.

l Pressing this key in run/stop mode wil cycle display through output frequency, reference frequency, output current,

output voltage, DC bus voltage in order.l In parameter edit mode, pressing this key will change the selected digit of the parameter value.

KeypadLCD Keypad

Keypad Function

Meets C3 without external EMC filter.

Meets the following standards:EC/EN

13 14

Service Items1. Warranty exchange service

2. Field maintenance or Repair/Return3. Spare parts supply services4. Technical support via phone or email5. Expert on site technical support service

6. Industry system solutions support

7. Professional technical training

Options

RPM750 AC Drive

Quality Assurance & Reliability (CE/UL Certification)

E492603

LCD keypad Remote keypad Profibus module Keypad adapter

RPM-232 RPM-USB RPMSOFT (PCTools) RPM-IO-Logic

Note: If there is a conflict with parameter content, pressing the key will not allow advancing to the next parameter.

Keys Function Description

In any display level, pressing the ESC key will return to the previous level. Holding the key will display the value

odisplay parameter determined by P05.01. When the Keypad is locked, holding the ESC key for 5 seconds will unlock.

Programmable key, it can function as Jog, Fwd./Rev., or coast stop by setting P05.07. Default function is jog.

Enter next level of the keypad display.

When in keypad control mode (P00.03 or P10.07=0), pressing this key will initiate drive run.

This key will stop the drive unless the keypad is locked. Resets drive faults unless locked.

INC/DEC: Used to select parameters and edit their values. In keypad run mode, they are used to

increase and decrease the speed of the motor.

l Pressing this key in run/stop mode wil cycle display through output frequency, reference frequency, output current,

output voltage, DC bus voltage in order.l In parameter edit mode, pressing this key will change the selected digit of the parameter value.

KeypadLCD Keypad

Keypad Function

Meets C3 without external EMC filter.

Meets the following standards:EC/EN

Service Address:

RPM750 AC Drive

E348255

RPM Controls25876 The Old RoadSuite 503 Stevenson Ranch, CA 91381

(800) [email protected]

RPM CONTROLS

Documents

RPM750 AC Drive - nebula.wsimg.com