| 8

USB

Fully automatic

Protos IIThe modular premium transmitter

that adapts to all process analytics

requirements.

Flexible

The modular structure facilitates adjustment to any measuring task thanks to the unlimited combination of measurement, extension and communication modules. Plug & play — You can plug the modules into each other in any order. They are recognized automatically. Simple retrofitting or conversion.

A plug-in data module is used to read out configuration files and update software — even under Ex conditions.

Fully automatic

In conjunction with the Unical control unit with a calibra-tion function or the Uniclean control unit for sensor cleaning plus a SensoGate or Ceramat retractable fitting, users can configure a fully automatic measuring loop. Even in hazardous areas. This is one-of-a-kind functionality.

Facts and features

– 4-wire Ex system with active outputs; ideal for use in Zone 1 hazardous areas

– Stainless steel housing with hygienically optimized surface or corrosion-proof coating

– Measurement with Memosens and analog sensors

– Broad-range power supply 24 ... 230 V AC/DC

– Low-reflection graphical display, backlit in white

– Parameter set changeover

– KI recorder signals faulty processes

– Predictive maintenance for optimal process management: • Sensor load matrix • CIP/SIP and autoclaving counter • Sensor network diagram • Remaining sensor service life

– Memory, audit trail, software update and software repair card

– Logbook and 2-channel measurement recorder

– Electronic data recording and backup according to FDA 21 CFR Part 11