Price list - A-Zeta Gomma V... · M.E.C. V-BELT is a trademark which stands out for the particularly sophisticated transmission belts whose high-quality and success are the result

S.p.A.

Price list

M.E.C. V-Belt DRIVE BELTSTransmission belts

You can always find a solution, whatever the question!

Products

For more than 30 years A Zeta Gomma, in the heart of the ceramic district of Sassuolo, has been an invaluable reference point for the most diverse productive sectors ranging from big industry to small businesses. This company, a European leader in the distribution of transmission belts, timing and thermo-weldable belts and all types of conveyor belts, stands out for its exceptional versatility and quick response service, with more than 60,000 items in stock, ensuring that every need can be promptly satisfied. The new facility, in Via Radici in Piano, extends across a covered surface area of ten thousand square metres. The company has grown steadily since it was founded in 1973, by strengthening its leadership in Italy, where it can count on more than 3,000 customers. Furthermore, it is in constant expansion paying increasing attention to overseas markets which today represent more than 20 % of its turnover. Its jewel in the crown and most prestigious business card is its own exclusive trademark M.E.C. V BELT which is now present all over the world.

M.E.C. V-Belt

The modern M.E.C. V-BELT OIL STAT V-belts produced by A Zeta Gomma stand out thanks to their excellent resistance and the high level of transmissible power.

If we compare them to the famous flat belt, the level of adherence is tripled thanks to contact only being established along the tilted sides of the pulley races ensuring improved adherence.

All M.E.C. V-BELT belts also feature OIL STAT. This means they are resistant to the action of oil and heat, they are electro-conductive, thus ensuring the electrostatic charges are deflected properly, and they are ISO 9000-compliant.

Produced with last generation technology and subjected to stringent checks and tests, the M.E.C. V-BELT belts can be supplied upon request in customised lengths of up to 22,000 mm which are not present in our catalogue.

5

M.E.C. V-BELT OIL STAT belts Conventional sections (Z-A-B-C-D-E) page 7

M.E.C. PERFORBELT Perforated and open-ended (Z-A-B-C) page 14

M.E.C. V-BELT FTD OIL STAT belts Conventional sections A-B-C with notched raw edges page 15

M.E.C. V-BELT SP belts Narrow section according to DIN standards (SPZ-SPA.SPB.SPC) page 19

M.E.C. V-BELT V belts Narrow section according to US standards (3-5-8V) page 23

M.E.C. V-BELT OIL STAT SP-FTD belts Notched narrow section with raw edges (SPZ-SPA-SPB-SPC) page 25

M.E.C. V-BELT FTD "V" OIL STAT belts Notched narrow section with raw edges according to US standards (3 and 5V) page 28

M.E.C. ESABELT Hexagonal AA - BB - CC page 30

M.E.C. VARIBELT For speed variators page 32

M.E.C. MULTIBELT Joined in units of 2 to 5 elements (A-B-C-3-5-8V) page 36

M.E.C. MINIBELT FT and FTD W-Y-T only with raw edge and with notched raw edges page 40

M.E.C. TIMING BELT Synchronous timing belts MXL-XL-L-H-XH-XXH page 43

M.E.C. TIMING BELT SLEEVES Synchronous timing sleeves MXL-XL-L-H-XH-XXH page 49

M.E.C. TIMING BELT DD Synchronous timing belts (double-sided) DD-XL-L-H DD-XL-L-H page 52

M.E.C. TIMING BELT SLEEVES DD Synchronous timing sleeves (double-sided) DD-XL-L-H page 54

M.E.C. TIMING BELT Synchronous open-ended TIMING BELT page 55

M.E.C. TIMING BELT HTD M.E.C. TIMING BELT HTD 3-5-8-14-20 M - 8MS page 56

M.E.C. TIMING BELT HTD SLEEVES HTD 3-5-8-14 M-8MS page 63

M.E.C. TIMING BELT HTD - CXP and CXA M.E.C. TIMING BELT 3-5-8-14 M HTD, CXP and CXA page 65

M.E.C. TIMING BELT HPPD M.E.C. TIMING BELT HPPD 3-5-8-14 M page 73

M.E.C. TIMING BELT HPPD SLEEVES HPPD 3-5-8-14M page 77

M.E.C. TIMING BELT HTD - DD DD-HTD belts (double-sided) 3-5-8 M - 8MS page 79

M.E.C. TIMING BELT HTD - DD SLEEVES DD-HTD, (double-sided) 3-5-8 M - SMS page 81

M.E.C. BELT MULTIRIBS (ex POLY V) Sections H-J-L-M page 82

M.E.C. FLAT BELT OIL STAT MAXIFLEX Flat endless belts page 85

M.E.C. POLIFLEXOSIL BELT Sections 3-5-7-11 M page 88

M.E.C. FLAT BELT Flat belt in 32 ounce cotton in 2-3-4-5-6-7-8 plies page 91

M.E.C. PROFILBELT Belts with different types of backing page 93

M.E.C. V-BELT is a trademark which stands out for the particularly sophisticated transmission belts whose high-quality and success are the result of continuous research and development. Our technical department is always available to assist the designer, manufacturer and user for any problem related to the transmission systems.

INDEX

M.E.C. V-BELTTRANSMISSION BELTS

6

Narrow Sections according to US standards - angle 38°

All M.E.C. V-BELT belts also feature OIL STAT. This means they are resistant to the action of oil and heat, they are electro-conductive and as

a result, allow safe deflection of the electrostatic charges and are also ISO 9000-compliant.

Prices in red indicate that the material is available ex stock

Prices in black indicate material which requires sales conditions to be defined on a case by case basis.

Conventional sections - angle 40°

Narrow sections according to DIN standards - angle 38°

M.E.C. V-BELT OIL STAT BELTS

7

The use of special, resistant, polyester inserts and special manufacturing procedures allows us to produce CONVENTIONAL M.E.C. V BELT OIL STAT

belts with the following characteristics:

A) high performanceB) development stabilityC) electro-conductivity (ISO 1813)D) resistance to oils and heatE) heat resistant to temperatures from -40°C to +70°C

Compliant with DIN standards 2215 - ISO 4184

Belt sections

The Conventional M.E.C. V-BELT OIL STAT

belts for industrial use are available in the sections indicated below:

Sections Amm

Smm

Angle

Z 10 6 40°

A 13 8 40°

B 17 11 40°

C 22 14 40°

D 32 19 40°

E 40 25 40°

Belt identification

The Conventional M.E.C. V-BELT OIL STAT V-belts can be identified by the RMA standard (e.g. Z 30) whereby the letter specifies the section and the number corresponds to a specific rated inside length in inches and

by the DIN standard (e.g. 10x762) whereby the first number specifies the rated width and the second number the rated inside development in millimetres.

Please consult the relevant Calculus Booklet for the technical characteristics.

Minimum recommended pitch diameters of the pulleys

Sections Z mm 63 A mm 90 B mm 140 C mm 200 D mm 355 E mm 500

CONVENTIONAL M.E.C. V-BELT OIL STAT BELTS

8

Type € /pc Rated inside Length mm

Z 12 ½ 7.10 315

Z 14 7.10 355

Z 16 7.10 410

Z 17 7.10 432

Z 17 ¼ 7.10 440

Z 17 ½ 7.10 445

Z 18 7.10 460

Z 19 7.10 480

Z 19 ½ 7.10 500

Z 20 ½ 7.10 520

Z 21 7.10 533

Z 21 ¼ 7.10 540

Z 21 ½ 7.10 545

Z 21 ¾ 7.10 555

Z 22 7.60 560

Z 22 ¼ 7.60 565

Z 23 7.60 585

Z 23 ¾ 7.60 605

Z 24 7.60 610

Z 25 7.60 635

Z 25 ½ 7.60 650

Z 26 7.60 660

Z 27 7.60 685

Z 28 7.60 710

Z 28 ½ 7.60 725

Z 29 7.60 737

Z 29 ½ 7.60 750

Z 30 7.60 762

Z 30 ½ 7.60 775

Z 30 ¾ 7.60 781

Z 31 7.70 787

Z 32 7.80 815

Z 32 ½ 7.80 825

Z 33 7.80 840

Z 33 ¼ 7.80 845

Z 33 ½ 7.80 852

Z 34 ¼ 7.80 870

A 35 7.80 890

Z 36 7.80 915

Z 36 ¾ 7.80 934

Z 37 7.80 940

Z 38 7.80 965

Z 38 ¼ 7.80 975

Z 39 7.80 991

Z 40 8.40 1016

SECTION “Z” (10 x 6 mm)


Z 40 ½ 8.40 1030

Z 41 8.40 1041

Z 42 8.40 1070

Z 43 8.40 1092

Z 44 8.40 1120

Z 45 8.40 1143

Z 46 8.40 1168

Z 47 9.20 1194

Z 48 9.20 1220

Z 49 9.20 1245

Z 50 9.20 1270

Z 51 9.20 1300

Z 52 9.20 1320

Z 53 9.20 1346

Z 54 9.20 1371

Z 55 9.20 1400

Z 57 11.00 1450

Z 58 11.00 1473

Z 59 11.00 1499

Z 59 ½ 11.00 1515

Z 60 11.00 1520

Z 61 11.20 1549

Z 64 11.20 1620

Z 65 11.80 1651

Z 67 12.10 1702

Z 68 ½ 12.90 1735

Z 71 12.90 1803

Z 72 12.90 1829

SECTION “Z” (10 x 6 mm)

Outside length =Inside length + 38 mmPitch length =Inside length + 25 mmTheoretical belt weight=0.065 kg/ml

Note: Available with rough back upon request with a 20% supplement


A 15 8.20 382

A 16 8.20 407

A 17 8.20 432

A 18 8.20 457

A 19 8.20 480

A 20 8.20 508

A 21 8.20 535

A 21 ¾ 8.20 552

A 22 8.20 560

A 23 8.20 587

A 23 ½ 8.20 600

A 24 8.20 610

A 25 8.20 637

A 26 8.20 660

A 27 8.20 686

A 28 8.20 710

A 29 8.20 737

A 29 ½ 8.20 750

A 30 8.20 762

A 31 8.20 787

A 31 ½ 8.20 800

A 32 8.40 813

A 33 8.40 838

A 33 ¼ 8.40 847

A 33 ½ 8.40 850

A 34 8.40 863

A 35 8.40 890

A 35 ½ 9.20 902

A 36 9.30 914

A 37 9.30 940

A 37 ½ 9.30 953

A 38 9.30 965

A 38 ½ 9.30 978

A 39 9.30 990

A 40 9.30 1016

A 41 9.30 1041

A 42 9.30 1067

A 43 10.30 1092

A 43 ½ 10.30 1105

A 44 10.30 1120

A 44 ½ 10.30 1132

A 45 10.30 1143

A 46 10.30 1168

SECTION “A” (13 x 8 mm)


9


A 47 11.00 1194

A 48 11.00 1220

A 49 11.00 1250

A 50 11.90 1270

A 51 11.90 1300

A 51 ½ 11.90 1307

A 52 11.90 1320

A 52 ½ 11.90 1337

A 53 11.90 1346

A 53 ¼ 11.90 1355

A 54 11.90 1372

A 55 11.90 1400

A 56 12.90 1422

A 57 12.90 1450

A 58 12.90 1475

A 59 12.90 1500

A 60 12.90 1525

A 61 12.90 1550

A 62 12.90 1575

A 63 12.90 1600

A 64 14.40 1625

A 65 14.40 1650

A 66 14.40 1676

A 67 14.40 1700

A 68 14.40 1725

A 69 14.40 1750

A 70 14.40 1775

A 71 14.40 1800

A 72 14.40 1825

A 73 15.80 1854

A 74 15.80 1880

A 75 15.80 1905

A 76 16.80 1930

A 77 16.80 1956

A 78 16.80 1980

A 79 16.80 2000

A 80 17.40 2032

A 81 17.40 2060

A 82 17.40 2083

A 83 17.40 2100

A 84 17.40 2134

A 85 18.70 2160




A 86 18.70 2187

A 87 18.70 2212

A 88 18.70 2240

A 89 19.70 2260

A 90 19.70 2286

A 91 19.70 2311

A 92 19.70 2337

A 93 19.70 2360

A 94 19.70 2388

A 95 20.70 2413

A 96 20.70 2438

A 97 20.70 2464

A 97 ½ 20.70 2475

A 98 20.70 2490

A 99 20.70 2515

A 100 23.20 2540

A 102 23.20 2591

A 103 23.20 2616

A 104 23.20 2641

A 105 23.20 2667

A 107 23.20 2718

A 108 23.20 2743

A 109 23.20 2768

A 110 23.20 2800

A 112 25.50 2845

A 113 25.50 2870

A 116 25.50 2946

A 118 26.20 3000

A 120 26.20 3048

A 122 26.20 3099

A 124 26.20 3150

A 126 26.20 3200

A 128 28.90 3250

A 130 28.90 3302

A 132 28.90 3350

A 134 28.90 3404

A 136 31.50 3454

A 138 31.50 3505

A 140 31.50 3550

A 142 31.50 3606

A 144 31.70 3658

A 146 31.70 3710

A 147 31.70 3737



A 148 31.70 3759

A 150 31.70 3810

A 155 35.00 3937

A 158 35.00 4000

A 162 35.00 4115

A 167 36.80 4250

A 173 36.80 4394

A 177 36.80 4500

A 180 38.60 4572

A 197 44.40 5000

A 210 44.40 5334

A 217 45.20 5477

A 221 45.20 5613

A 223 45.20 5664




10


B 22 ½ 10.10 570

B 23 10.10 587

B 24 10.10 612

B 24 ½ 10.10 622

B 25 10.10 637

B 26 10.10 660

B 27 10.10 686

B 28 10.10 710

B 29 10.10 737

B 30 10.10 762

B 31 10.10 787

B 32 10.10 800

B 32 ¼ 11.20 822

B 32 ½ 11.20 825

B 33 11.20 838

B 34 11.20 863

B 34 ¾ 11.20 880

B 35 11.20 889

B 35 ½ 11.20 900

B 35 ¾ 11.20 907

B 36 11.20 917

B 36 ¾ 12.10 937

B 37 12.10 942

B 38 12.10 965

B 38 ½ 12.10 978

B 39 12.10 990

B 39 ½ 12.10 1000

B 40 12.90 1016

B 41 12.90 1040

B 42 12.90 1067

B 42 ½ 12.90 1075

B 43 12.90 1090

B 44 12.90 1120

B 44 ¼ 12.90 1127

B 45 14.80 1142

B 46 14.80 1168

B 46 ¾ 14.80 1187

B 47 15.60 1194

B 47 ¼ 15.60 1200

B 47 ½ 15.60 1207

B 48 15.60 1220

B 49 15.60 1250

SECTION “B” (17 x 11 mm) SECTION “B” (17 x 11 mm)


B 50 16.80 1275

B 51 16.80 1300

B 52 16.80 1320

B 53 16.80 1350

B 53 ½ 16.80 1360

B 54 16.80 1372

B 55 16.80 1400

B 55 ½ 18.70 1412

B 56 18.70 1422

B 57 18.70 1450

B 58 18.70 1473

B 59 18.70 1500

B 60 19.00 1525

B 61 19.00 1550

B 62 19.00 1575

B 63 19.00 1600

B 64 21.30 1625

B 64 ½ 21.30 1642

B 65 21.30 1650

B 66 21.30 1676

B 66 ¼ 21.30 1682

B 66 ½ 21.30 1692

B 67 21.30 1700

B 67 ¼ 21.30 1712

B 68 21.70 1725

B 69 21.70 1750

B 69 ½ 21.70 1761

B 70 21.70 1775

B 71 21.70 1800

B 72 22.90 1829

B 73 22.90 1850

B 74 22.90 1880

B 75 22.90 1905

B 76 22.90 1930

B 77 22.90 1956

B 78 22.90 1981

B 79 24.80 2000

B 80 24.80 2032

B 81 24.80 2060

B 82 24.80 2083

B 83 24.80 2108

B 84 26.90 2134

SECTION “B” (17 x 11 mm)


B 85 26.90 2160

B 86 26.90 2187

B 87 26.90 2215

B 88 26.90 2240

B 89 27.90 2261

B 90 27.90 2286

B 91 27.90 2312

B 92 27.90 2337

B 93 27.90 2360

B 94 30.00 2388

B 95 31.70 2413

B 96 31.70 2438

B 97 31.70 2465

B 97 ½ 31.70 2477

B 98 31.70 2500

B 99 31.70 2515

B 100 31.70 2540

B 102 33.00 2600

B 103 33.40 2616

B 104 33.70 2641

B 105 33.70 2667

B 106 33.70 2700

B 107 33.70 2718

B 108 34.30 2750

B 109 34.30 2769

B 110 34.30 2800

B 112 34.30 2845

B 112 ½ 34.30 2857

B 114 37.90 2900

B 115 37.90 2921

B 116 37.90 2950

B 117 37.90 2972

B 118 37.90 3000

B 120 40.80 3048

B 122 40.80 3100

B 124 40.80 3150

B 125 41.50 3175

B 126 41.50 3200

B 127 41.50 3227

B 128 42.50 3250

B 130 42.50 3302

B 131 42.50 3327

B 132 42.50 3350

B 133 42.50 3378

B 134 44.30 3407

B 135 44.30 3429



11



B 136 45.30 3450

B 138 45.30 3500

B 140 45.30 3550

B 142 47.50 3607

B 144 47.50 3658

B 146 47.50 3709

B 147 47.50 3737

B 148 47.50 3750

B 149 49.50 3785

B 151 51.40 3850

B 152 51.40 3861

B 154 51.40 3912

B 156 52.00 3962

B 157 52.00 3987

B 158 52.00 4000

B 161 52.00 4087

B 162 53.80 4115

B 163 53.80 4142

B 165 54.60 4200

B 167 54.60 4250

B 168 54.60 4267

B 169 56.80 4292

B 173 56.80 4394

B 175 56.80 4450

B 177 56.80 4500

B 180 56.80 4572

B 186 56.80 4727

B 188 56.80 4777

B 190 56.80 4826

B 192 56.80 4877

B 195 65.20 4953

B 197 65.20 5000

B 200 65.20 5080

B 201 65.20 5105

B 204 65.20 5182

B 208 70.00 5285

B 210 70.00 5334

B 212 70.00 5385

B 214 70.00 5436

B 220 73.50 5588

B 221 73.50 5615

B 223 74.60 5664

B 224 74.70 5690

B 225 75.00 5715

B 228 76.20 5792



B 229 76.40 5816

B 232 78.90 5893

B 237 78.90 6020

B 240 80.20 6096

B 248 83.20 6300

B 249 84.10 6325

B 253 85.60 6426

B 255 86.10 6477

B 259 87.60 6579

B 262 88.60 6655

B 265 90.00 6730

B 270 91.30 6858

B 275 92.70 6985

B 276 92.80 7010

B 280 94.40 7112

B 285 95.90 7240

B 300 100.80 7620

B 315 106.40 8000

B 330 111.50 8382

B 345 116.80 8763

B 360 121.80 9145

B 361 122.10 9170

B 364 123.20 9245

B 366 124.10 9296

B 374 133.20 9500

B 394 133.20 10008

B 428 ½ 146.30 10885

B 433 146.30 11000

B 449 159.50 11400

B 472 159.50 11990

B 488 164.90 12400

B 510 172.50 12960

B 512 173.40 13000

B 551 186.50 13995

B 553 186.90 14046

B 583 197.40 14808

B 612 227.00 15544


SECTION “C” (22 x 14 mm)


C 33 ¾ 15.80 858

C 37 ½ 17.20 950

C 39 18.00 990

C 39 ¾ 18.00 1013

C 43 19.00 1090

C 48 19.00 1220

C 49 21.00 1250

C 49 ¼ 21.00 1257

C 50 23.40 1270

C 51 23.40 1295

C 52 23.40 1320

C 53 23.40 1350

C 54 24.30 1370

C 55 24.30 1400

C 56 24.30 1425

C 57 26.50 1448

C 58 26.50 1473

C 58 ½ 26.50 1486

C 59 26.50 1500

C 60 28.60 1524

C 61 28.60 1550

C 62 28.60 1574

C 62 ¼ 28.60 1583

C 63 28.60 1600

C 64 28.60 1625

C 65 30.40 1650

C 66 30.40 1676

C 67 30.40 1702

C 68 31.60 1727

C 69 31.60 1753

C 70 31.60 1778

C 71 31.60 1804

C 71 ½ 35.00 1816

C 72 35.00 1829

C 73 35.00 1854

C 74 35.00 1880

C 75 35.00 1905

C 76 35.00 1925

C 77 35.00 1956

C 78 35.00 1981

C 79 36.80 2006

C 80 36.80 2032

C 81 36.80 2057

C 82 36.80 2082


Note: Available with rough back upon request with a 20% supplement Note: Available with rough back upon request with a 20% supplement

12


C 83 36.80 2108

C 84 38.30 2134

C 85 38.30 2159

C 86 38.30 2184

C 87 39.30 2210

C 88 39.60 2235

C 89 39.60 2260

C 90 41.70 2286

C 91 41.70 2311

C 92 41.70 2336

C 93 41.70 2360

C 94 41.70 2388

C 95 41.70 2413

C 96 44.10 2438

C 97 44.10 2462

C 97 ½ 44.10 2477

C 98 44.10 2489

C 99 45.60 2525

C 100 45.60 2540

C 101 45.60 2560

C 102 47.10 2591

C 104 47.10 2642

C 105 47.10 2667

C 106 47.10 2692

C 108 47.10 2750

C 110 47.10 2800

C 112 52.00 2845

C 112 ½ 52.00 2858

C 114 52.00 2896

C 115 52.00 2921

C 116 52.00 2950

C 117 52.00 2971

C 118 52.00 3000

C 120 54.60 3048

C 122 55.10 3100

C 124 55.10 3150

C 126 56.70 3200

C 128 58.30 3250

C 129 58.60 3277

C 130 58.90 3302

C 132 58.90 3350

C 134 62.00 3404

C 136 62.00 3456

C 138 62.00 3505

SECTION “C” (22 x 14 mm) SECTION “C” (22 x 14 mm) SECTION “C” (22 x 14 mm)


C 140 62.00 3550

C 142 62.00 3607

C 144 65.60 3658

C 145 65.60 3682

C 147 65.60 3733

C 148 65.60 3750

C 150 70.80 3810

C 152 70.80 3860

C 153 70.80 3902

C 158 70.80 4000

C 160 70.80 4064

C 162 70.80 4115

C 165 73.00 4193

C 166 76.80 4216

C 168 76.80 4267

C 170 76.80 4318

C 173 76.80 4394

C 175 80.70 4445

C 177 80.70 4500

C 180 83.20 4572

C 185 83.20 4700

C 187 83.20 4750

C 190 88.00 4826

C 193 88.00 4900

C 195 88.00 4953

C 197 88.80 5004

C 200 88.80 5080

C 204 88.80 5182

C 208 98.10 5285

C 210 98.90 5334

C 212 106.30 5384

C 216 106.30 5486

C 220 109.10 5588

C 222 109.10 5638

C 223 109.10 5664

C 225 109.10 5715

C 228 110.40 5792

C 230 115.10 5842

C 236 115.10 5995

C 238 115.10 6045

C 240 116.00 6096

C 248 117.50 6300

C 250 120.10 6350


C 255 122.50 6477

C 261 132.10 6629

C 265 132.10 6730

C 268 132.10 6807

C 270 132.10 6858

C 276 140.30 7010

C 280 142.20 7112

C 285 145.00 7240

C 297 156.80 7544

C 300 156.80 7620

C 303 158.40 7696

C 314 164.00 7975

C 315 166.70 8000

C 316 166.70 8026

C 330 166.70 8382

C 336 175.60 8535

C 345 180.20 8763

C 360 188.00 9145

C 394 205.80 10008

C 420 219.40 10668

C 424 221.50 10770

C 440 229.80 11176

C 464 242.50 11785

C 482 251.90 12243

C 485 252.70 12319

C 540 263.70 13716




13


D 270 229.20 6858

D 280 232.10 7112

D 282 232.10 7163

D 285 237.00 7240

D 295 247.30 7493

D 298 247.30 7570

D 300 251.80 7620

D 314 263.80 7975

D 316 267.80 8026

D 326 276.20 8280

D 330 279.20 8382

D 335 289.40 8509

D 345 292.30 8763

D 354 307.90 8991

D 360 307.90 9145

D 374 333.70 9500

D 390 333.70 9905

D 394 337.40 10008

D 420 359.50 10668

D 441 377.00 11200

D 460 393.60 11684

D 470 402.20 11938

D 480 410.70 12192

D 500 462.40 12700

D 540 462.40 13716

D 600 513.30 15240


D 93 80.90 2362

D 98 80.90 2490

D 101 85.60 2565

D 104 85.60 2641

D 110 90.70 2795

D 118 97.10 3000

D 120 98.60 3048

D 124 102.10 3150

D 125 105.50 3175

D 128 105.50 3251

D 135 111.90 3429

D 136 111.90 3454

D 137 112.70 3480

D 140 115.10 3555

D 144 118.70 3658

D 148 126.90 3760

D 150 126.90 3810

D 154 126.90 3912

D 158 130.10 4013

D 162 133.30 4115

D 167 140.10 4241

D 170 140.10 4318

D 173 142.60 4394

D 177 145.70 4496

D 180 148.30 4572

D 187 154.00 4750

D 195 160.60 4953

D 197 162.10 5004

D 204 168.20 5182

D 205 168.70 5208

D 207 170.20 5259

D 210 172.70 5334

D 220 184.30 5588

D 223 184.50 5664

D 225 187.40 5715

D 236 194.30 5995

D 238 196.90 6045

D 240 197.60 6096

D 248 204.50 6300

D 250 205.80 6350

D 255 210.00 6477

D 260 218.50 6604

D 266 218.50 6756

SECTION “D” (32 x 19 mm) SECTION “D” (32 x 19 mm) SECTION “E” (40 x 25 mm)


E 180 302.10 4575

E 197 322.30 5000

E 210 338.90 5335

E 226 359.70 5740

E 240 377.10 6096

E 248 387.30 6300

E 255 395.80 6477

E 270 414.00 6858

E 285 433.80 7240

E 300 452.60 7620

E 301 454.60 7645

E 316 472.40 8026

E 330 491.20 8382

E 345 509.30 8763

E 360 528.10 9145

E 361 571.00 9169

E 392 571.00 9957

E 394 571.00 10008

E 396 603.20 10058

E 410 603.20 10414

E 416 603.20 10566

E 420 603.20 10668

E 441 629.90 11200

E 453 679.20 11506

E 456 679.20 11582

E 460 679.20 11684

E 470 679.20 11938

E 475 679.20 12065

E 480 679.20 12190

E 520 754.10 13208

E 540 754.10 13715

E 600 831.20 15240




Note: Available with rough back upon request with a 20% supplement Note: Available with rough back upon request with a 20% supplement

14

These are perforated belts, open-ended and are also oil and heat resistant. They are suitable for demanding or emergency applications. Assembly is extremely quick thanks to the metal joint which locks the belt together. Their compact shape affords long life.

Sections Broad Base

Thickness

Z 10 6

A 13 8

B 17 11

C 22 14

M.E.C. PERFORBELT® OIL STAT® V-BELTS

Sections €/metre

Z - 10x6 33.20

A - 13x8 39.30

B - 17x11 53.00

C - 22x14 75.60

Sections €/metre

Type Z 4.70

Type A 5.00

Type B 5.50

Type C 6.30

METAL JOINT

M.E.C. PERFORBELT OIL STAT V-BELTS

15

The Z-A-B-C-FTD belts are especially suited to heavy-duty conditions and those with technical limits. Use of these belts is recommended when:

A) pulleys have smaller diameters than the standard requiresB) transmissions have a high number of revolutionsC) there is a surplus of power requirements

Belt sections

The Conventional M.E.C. V-BELT OIL STAT FTD V-belts for industrial use are available in the sections indicated below:

Compliant with DIN standards 2215 - UNI 5265 - ISO R52 - 253

Sections Amm

Smm

Angle

Z 10 6 40°

A 13 8 40°

B 17 11 40°

C 22 14 40°

Belt identification

The Conventional M.E.C. V-BELT OIL STAT V-belts can be identified by the RMA standard (e.g. A 30) whereby the letter specifies the section and the number corresponds to a specific rated inside length in inches and by the DIN standard (e.g. 10x762) whereby the first number specifies the rated width and the second number the rated inside development in millimetres..

N.B.:

The Conventional M.E.C. V-BELT OIL STAT Z-A-B-C FTD V-belts (with notched raw edges) are the result of a highly advanced production system using blends of high quality rubber. The lighter weight of the belt reduces the centrifugal force, thereby providing greater speed; the forged notches afford greater flexibility and consequently a higher frequency of flexures and faster heat dispersion (resistant to temperatures from -30° to + 80°).


FTD: longer life compared to corresponding traditional values

Minimum recommended pitch diameters of the pulleys:

Sections Z mm 50 A mm 70 B mm 100 C mm 170

M.E.C. V-BELT OIL STAT Z-A-B-C-FTDbelts with notched raw edges, conventional sections according to RMA and DIN standard

16


ZFTD 64 18.40 1620

ZFTD 65 18.40 1651

ZFTD 66 18.40 1676

ZFTD 67 18.40 1702

ZFTD 68 18.40 1727

ZFTD 69 18.90 1752

ZFTD 70 18.90 1778

ZFTD 71 18.90 1803

ZFTD 73 20.00 1854

ZFTD 75 20.00 1905

ZFTD 78 22.70 1981

ZFTD 79 22.70 2006

ZFTD 80 22.90 2032

ZFTD 82 23.70 2083

ZFTD 85 24.50 2159

ZFTD 88 25.80 2235

ZFTD 90 26.40 2286

ZFTD 91 26.40 2311


ZFTD 17 ½ 8.70 445

ZFTD 19 8.90 480

ZFTD 20 8.90 508

ZFTD 20 ½ 8.90 521

ZFTD 21 8.90 533

ZFTD 21 ½ 8.90 545

ZFTD 24 8.90 610

ZFTD 24 ¾ 8.90 629

ZFTD 26 8.90 660

ZFTD 27 8.90 686

ZFTD 28 8.90 710

ZFTD 29 ½ 8.90 749

ZFTD 30 8.90 762

ZFTD 30 ½ 8.90 775

ZFTD 32 9.60 813

ZFTD 33 9.60 838

ZFTD 34 ½ 9.60 876

ZFTD 35 10.50 889

ZFTD 36 10.50 914

ZFTD 36 ½ 10.50 927

ZFTD 37 10.50 940

ZFTD 37 ½ 10.50 952

ZFTD 38 10.50 965

ZFTD 39 10.50 991

ZFTD 39 ½ 11.50 1003

ZFTD 40 11.50 1016

ZFTD 40 ½ 11.50 1029

ZFTD 41 11.50 1041

ZFTD 42 11.50 1070

ZFTD 43 11.50 1092

ZFTD 44 12.80 1120

ZFTD 45 12.80 1143

ZFTD 46 ½ 13.20 1181

ZFTD 47 ½ 13.20 1206

ZFTD 49 13.20 1245

ZFTD 50 14.00 1270

ZFTD 52 15.70 1320

ZFTD 53 15.70 1346

ZFTD 53 ½ 15.70 1359

ZFTD 55 15.70 1400

ZFTD 60 17.20 1520

ZFTD 61 17.20 1549

ZFTD 62 17.20 1575

ZFTD 63 17.20 1600

SECTION “ZFTD” (10x6 mm) SECTION “ZFTD” (10x6 mm) SECTION “AFTD” (13x8 mm)



AFTD 21 14.40 533

AFTD 22 14.40 559

AFTD 23 14.40 585

AFTD 24 14.40 610

AFTD 25 14.40 635

AFTD 26 14.40 660

AFTD 27 14.40 686

AFTD 28 14.40 710

AFTD 29 14.40 737

AFTD 30 14.40 762

AFTD 31 14.40 787

AFTD 32 14.50 810

AFTD 33 14.50 838

AFTD 34 14.50 863

AFTD 35 14.50 890

AFTD 36 16.30 914

AFTD 37 16.30 940

AFTD 38 16.30 965

AFTD 39 16.30 990

AFTD 40 16.30 1016

AFTD 41 16.30 1041

AFTD 42 16.30 1067

AFTD 43 18.20 1092

AFTD 44 18.20 1120

AFTD 45 18.20 1143

AFTD 46 18.20 1168

AFTD 47 19.10 1194

AFTD 48 19.10 1220

AFTD 49 19.10 1250

AFTD 50 21.00 1270

AFTD 51 21.00 1295

AFTD 52 21.00 1320

AFTD 53 21.00 1346

AFTD 54 21.00 1372

AFTD 55 21.00 1400

AFTD 56 22.70 1425

AFTD 57 22.70 1450

AFTD 58 22.70 1475

AFTD 59 22.70 1500

AFTD 60 22.70 1525

AFTD 61 22.70 1550

AFTD 62 22.70 1575

AFTD 63 22.70 1600

M.E.C. V-BELT OIL STAT Z-A-B-C-FTD

17

SECTION “AFTD” (13x8 mm)


AFTD 64 25.10 1625

AFTD 65 25.10 1650

AFTD 66 25.10 1675

AFTD 67 25.10 1700

AFTD 68 25.10 1725

AFTD 69 25.10 1750

AFTD 70 25.10 1775

AFTD 71 25.10 1800

AFTD 72 25.10 1826

AFTD 73 27.80 1854

AFTD 74 27.80 1880

AFTD 75 27.80 1905

AFTD 76 27.80 1930

AFTD 77 27.80 1956

AFTD 78 27.80 1981

AFTD 79 27.80 2005

AFTD 80 28.70 2031

AFTD 81 28.70 2058

AFTD 82 28.70 2083

AFTD 83 28.70 2100

AFTD 84 28.70 2133

AFTD 85 30.80 2160

AFTD 86 30.80 2185

AFTD 87 30.80 2210

AFTD 88 30.80 2235

AFTD 89 32.40 2260

AFTD 90 32.40 2286

AFTD 91 32.40 2311

AFTD 92 32.40 2337

AFTD 93 32.40 2362

AFTD 94 32.40 2383

AFTD 95 33.60 2413

AFTD 96 33.60 2438

AFTD 97 33.60 2464

AFTD 98 33.60 2490

AFTD 100 38.20 2540

AFTD 104 40.90 2641

AFTD 197 77.50 5004


SECTION “BFTD” (17x11 mm)


BFTD 28 17.80 710

BFTD 31 17.80 787

BFTD 32 17.80 813

BFTD 34 19.70 863

BFTD 35 19.70 890

BFTD 36 19.70 914

BFTD 38 21.20 965

BFTD 39 22.20 991

BFTD 40 22.70 1016

BFTD 41 22.70 1041

BFTD 42 22.70 1067

BFTD 43 22.70 1092

BFTD 44 22.70 1120

BFTD 45 25.80 1143

BFTD 46 25.80 1168

BFTD 47 27.50 1194

BFTD 48 27.50 1220

BFTD 49 27.50 1250

BFTD 50 29.60 1270

BFTD 51 29.60 1295

BFTD 52 29.60 1320

BFTD 53 29.60 1346

BFTD 54 29.60 1372

BFTD 55 29.60 1400

BFTD 56 33.00 1425

BFTD 57 33.00 1450

BFTD 58 33.00 1475

BFTD 59 33.00 1500

BFTD 60 33.60 1525

BFTD 61 33.60 1550

BFTD 62 33.60 1575

BFTD 63 33.60 1600

BFTD 64 37.80 1625

BFTD 65 37.80 1650

BFTD 66 37.80 1675

BFTD 67 37.80 1700

BFTD 68 38.40 1725

BFTD 69 38.40 1750

BFTD 70 38.40 1775

BFTD 71 38.40 1800

BFTD 72 40.40 1825

BFTD 73 40.40 1854

BFTD 74 40.40 1880

BFTD 75 40.40 1905

SECTION “BFTD” (17x11 mm)


BFTD 76 40.40 1930

BFTD 77 40.40 1956

BFTD 78 40.40 1981

BFTD 79 40.40 2005

BFTD 80 43.40 2031

BFTD 81 43.40 2058

BFTD 82 43.40 2083

BFTD 83 43.40 2100

BFTD 84 47.40 2133

BFTD 85 47.40 2160

BFTD 86 47.40 2185

BFTD 87 47.40 2210

BFTD 88 47.40 2235

BFTD 89 49.20 2260

BFTD 90 49.20 2286

BFTD 91 49.20 2311

BFTD 92 49.20 2337

BFTD 93 49.20 2362

BFTD 94 49.20 2388

BFTD 95 52.30 2413

BFTD 96 52.30 2438

BFTD 97 52.30 2464

BFTD 98 52.30 2490

BFTD 99 52.30 2515

BFTD 100 52.30 2540

BFTD 102 54.40 2591

BFTD 107 56.20 2718

BFTD 118 62.20 3000

BFTD 120 64.00 3048



18


CFTD 51 38.40 1295

CFTD 53 39.10 1346

CFTD 55 40.10 1400

CFTD 60 47.00 1595

CFTD 67 50.20 1702

CFTD 68 52.10 1725

CFTD 72 54.10 1825

CFTD 75 57.60 1905

CFTD 78 57.60 1981

CFTD 79 59.20 2007

CFTD 81 60.60 2058

CFTD 85 62.80 2160

CFTD 90 68.60 2286

CFTD 96 72.40 2438

CFTD 100 74.90 2540

CFTD 118 88.40 2997

SECTION “CFTD” (22x14 mm)



19

Compared to conventional belts, the SP belts make it possible to reduce space, and more specifically:A) carry out transmissions of limited sizeB) can be used on motors with a high number of revolutions

C) use of cone pulleysD) lighter pulleysE) high transmission ratiosF) reduced distance between pulley centresG) electro-conductivity (ISO 1813)

Belt sections

The Conventional M.E.C. V-BELT SP OIL STAT V-belts are available in the sections indicated in the table below :

Compliant with DIN standards 7753 - ISO 4184

Sections Amm

Smm

Angle

SPZ 9.7 8 38°

SPA 12.7 10 38°

SPB 16.3 13 38°

SPC 22 18 38°

Belt identification

The M.E.C. V-BELT SP OIL STAT V-belts are identified by letters which specify the section (e.g. SPZ ) and by a number (e.g. 900 ) which corresponds to the specific rated pitch length in mm.


Minimum recommended pitch diameters pulleys:

Sections SPZ mm 63 SPA mm 100 SPB mm 140 SPC mm250

M.E.C. V-BELT SP-OIL STAT BELTS with narrow sections according to DIN standards

20

Type € /pc.Rated outside

Lengthmm

SPZ 512 8.00 525

SPZ 587 8.00 600

SPZ 607 8.00 620

SPZ 612 8.00 625

SPZ 630 8.50 643

SPZ 637 8.50 650

SPZ 662 8.50 675

SPZ 670 8.50 683

SPZ 687 8.50 700

SPZ 710 8.50 723

SPZ 722 8.50 735

SPZ 737 8.50 750

SPZ 750 8.50 763

SPZ 762 8.50 775

SPZ 772 8.50 785

SPZ 787 8.50 800

SPZ 800 8.50 813

SPZ 812 8.80 825

SPZ 837 8.80 850

SPZ 850 8.80 863

SPZ 862 8.80 875

SPZ 887 8.80 900

SPZ 900 8.80 913

SPZ 912 9.30 925

SPZ 937 9.30 950

SPZ 950 9.30 963

SPZ 962 9.30 975

SPZ 987 9.30 1000

SPZ 1000 9.30 1013

SPZ 1012 9.30 1025

SPZ 1037 10.80 1050

SPZ 1060 10.80 1073

SPZ 1077 10.80 1090

SPZ 1087 10.80 1100

SPZ 1112 10.80 1125

SPZ 1120 10.80 1133

SPZ 1137 11.40 1150

SPZ 1147 11.40 1160

SPZ 1150 11.40 1163

SPZ 1162 11.40 1175

SPZ 1180 11.40 1193

SPZ 1187 11.40 1200

SECTION “SPZ” (9.7x8 mm)

Inside length =Outside length - 51 mm.Pitch length =Outside length - 13 mm.Theoretical belt weight=0.074 kg/ml


Lengthmm

SPZ 1202 11.90 1215

SPZ 1212 11.90 1225

SPZ 1237 11.90 1250

SPZ 1250 11.90 1263

SPZ 1262 11.90 1275

SPZ 1270 13.30 1283

SPZ 1280 13.30 1293

SPZ 1287 13.30 1300

SPZ 1312 13.30 1325

SPZ 1320 13.30 1333

SPZ 1337 14.40 1350

SPZ 1362 14.40 1375

SPZ 1387 14.40 1400

SPZ 1400 14.40 1413

SPZ 1412 14.40 1425

SPZ 1437 14.40 1450

SPZ 1462 14.40 1475

SPZ 1487 14.40 1500

SPZ 1500 14.60 1513

SPZ 1512 14.60 1525

SPZ 1537 15.80 1550

SPZ 1562 15.80 1575

SPZ 1587 15.80 1600

SPZ 1600 15.80 1613

SPZ 1612 15.80 1625

SPZ 1637 17.20 1650

SPZ 1662 17.20 1675

SPZ 1687 17.20 1700

SPZ 1700 17.20 1712

SPZ 1737 17.50 1750

SPZ 1762 17.50 1775

SPZ 1787 17.50 1800

SPZ 1800 17.50 1813

SPZ 1812 18.30 1825

SPZ 1850 18.30 1863

SPZ 1862 18.30 1875

SPZ 1887 18.30 1900

SPZ 1900 18.30 1913

SPZ 1937 19.10 1950

SPZ 1962 19.10 1975

SPZ 1987 19.10 2000

SPZ 2000 19.10 2013



Lengthmm

SPZ 2019 20.60 2032

SPZ 2120 20.60 2133

SPZ 2240 21.80 2253

SPZ 2360 22.70 2373

SPZ 2500 24.60 2513

SPZ 2580 25.50 2593

SPZ 2650 25.50 2663

SPZ 2720 27.60 2733

SPZ 2800 27.60 2813

SPZ 3000 28.10 3013

SPZ 3150 30.20 3163

SPZ 3350 33.10 3363

SPZ 3550 33.40 3563

SPZ 3750 36.00 3763


M.E.C. V-BELT SP-OIL STAT

21


Lengthmm

SPA 732 10.80 750

SPA 757 10.80 775

SPA 782 10.80 800

SPA 800 10.80 818

SPA 807 10.80 825

SPA 832 11.90 850

SPA 850 11.90 868

SPA 857 11.90 875

SPA 882 11.90 900

SPA 900 11.90 918

SPA 907 13.40 925

SPA 932 13.40 950

SPA 950 13.40 968

SPA 957 13.40 975

SPA 982 13.40 1000

SPA 1000 13.40 1018

SPA 1007 13.40 1025

SPA 1032 15.60 1050

SPA 1060 15.60 1078

SPA 1082 15.60 1100

SPA 1107 15.60 1125

SPA 1120 15.60 1138

SPA 1132 16.70 1150

SPA 1157 16.70 1175

SPA 1180 16.70 1198

SPA 1207 16.70 1225

SPA 1232 16.70 1250

SPA 1250 16.70 1268

SPA 1257 16.70 1275

SPA 1282 18.00 1300

SPA 1307 18.00 1325

SPA 1320 18.00 1338

SPA 1332 18.90 1332

SPA 1357 18.90 1375

SPA 1382 18.90 1400

SPA 1400 18.90 1418

SPA 1407 18.90 1425

SPA 1425 20.60 1441

SPA 1432 20.60 1450

SPA 1457 20.60 1475

SPA 1482 20.60 1500

SPA 1500 20.60 1518

SECTION “SPA” (12.7x10 mm)

Inside length =Outside length - 63 mm.Pitch length =Outside length - 18 mm.Theoretical belt weight = 0.119 kg/ml



Lengthmm

SPA 1507 20.60 1525

SPA 1532 21.00 1550

SPA 1557 21.00 1575

SPA 1582 21.00 1600

SPA 1600 21.00 1618

SPA 1607 21.00 1625

SPA 1632 23.10 1650

SPA 1650 23.10 1668

SPA 1657 23.10 1675

SPA 1682 23.10 1700

SPA 1700 23.10 1718

SPA 1707 24.10 1725

SPA 1732 24.10 1750

SPA 1757 24.10 1775

SPA 1782 24.10 1800

SPA 1800 24.10 1818

SPA 1807 25.50 1825

SPA 1832 25.50 1850

SPA 1857 25.50 1875

SPA 1882 25.50 1900

SPA 1900 25.50 1918

SPA 1907 26.70 1925

SPA 1932 26.70 1950

SPA 1950 26.70 1968

SPA 1957 26.70 1975

SPA 1982 26.70 2000

SPA 2000 27.80 2018

SPA 2032 27.80 2050

SPA 2057 27.80 2070

SPA 2120 27.80 2138

SPA 2132 29.00 2150

SPA 2240 29.00 2258

SPA 2282 30.90 2300

SPA 2300 30.90 2318

SPA 2307 30.90 2325

SPA 2360 30.90 2378

SPA 2382 31.20 2400

SPA 2432 32.20 2450

SPA 2482 32.20 2500

SPA 2500 32.20 2518

SPA 2532 34.60 2550

SPA 2580 34.60 2598

SPA 2632 34.60 2650



Lengthmm

SPA 2650 36.10 2668

SPA 2720 36.60 2738

SPA 2725 36.60 2743

SPA 2732 36.60 2750

SPA 2782 36.60 2800

SPA 2800 36.60 2818

SPA 2832 38.90 2850

SPA 2847 38.90 2865

SPA 2882 38.90 2900

SPA 2932 38.90 2950

SPA 2982 38.90 3000

SPA 3000 38.90 3018

SPA 3150 40.90 3168

SPA 3350 43.40 3368

SPA 3400 47.00 3418

SPA 3550 47.00 3568

SPA 3750 49.70 3768

SPA 4000 52.50 4018

SPA 4250 54.20 4268

SPA 4500 57.90 4518

SPA 4750 61.40 4768

M.E.C. V-BELT SP-OIL STAT

22


Lengthmm

SPB 1250 24.40 1272

SPB 1310 24.70 1332

SPB 1320 24.90 1342

SPB 1360 25.00 1382

SPB 1380 25.30 1402

SPB 1400 25.50 1422

SPB 1450 26.80 1472

SPB 1500 28.80 1522

SPB 1550 29.80 1572

SPB 1600 31.00 1622

SPB 1700 32.40 1722

SPB 1750 33.40 1772

SPB 1800 34.40 1822

SPB 1850 36.10 1872

SPB 1860 36.10 1882

SPB 1900 36.60 1922

SPB 1950 38.50 1972

SPB 2000 38.50 2022

SPB 2110 40.90 2132

SPB 2120 40.90 2142

SPB 2150 41.40 2172

SPB 2240 43.50 2262

SPB 2246 45.70 2268

SPB 2280 45.70 2302

SPB 2300 45.70 2322

SPB 2360 45.70 2382

SPB 2430 49.00 2452

SPB 2500 49.00 2522

SPB 2580 51.00 2602

SPB 2650 51.00 2672

SPB 2680 54.10 2702

SPB 2720 54.10 2742

SPB 2800 54.10 2822

SPB 2830 57.90 2852

SPB 3000 57.90 3022

SPB 3070 58.90 3092

SPB 3150 59.40 3172

SPB 3250 61.50 3272

SPB 3350 63.30 3372

SPB 3450 65.40 3472

SECTION “SPB” (16.3x13 mm)


Lengthmm

SPB 3550 67.80 3572

SPB 3650 69.80 3672

SPB 3750 72.00 3772

SPB 3800 76.20 3822

SPB 3870 76.20 3892

SPB 4000 76.20 4022

SPB 4250 80.70 4272

SPB 4370 82.90 4392

SPB 4500 85.70 4522

SPB 4620 87.10 4642

SPB 4750 91.00 4772

SPB 5000 95.30 5022

SPB 5300 101.80 5322

SPB 5600 107.70 5622

SPB 5900 111.20 5922

SPB 6000 114.40 6022

SPB 6300 119.80 6322

SPB 6700 119.80 6722

SPB 7100 138.20 7122

SPB 7500 142.30 7522

SPB 8000 150.70 8022




Lengthmm

SPC 1700 54.10 1730

SPC 2000 61.70 2030

SPC 2120 64.60 2150

SPC 2240 68.50 2270

SPC 2360 72.80 2390

SPC 2500 76.20 2530

SPC 2600 81.00 2630

SPC 2650 81.00 2680

SPC 2800 85.70 2830

SPC 3000 91.80 3030

SPC 3150 92.50 3180

SPC 3350 96.80 3380

SPC 3550 102.20 3580

SPC 3750 108.60 3780

SPC 4000 117.10 4030

SPC 4250 123.10 4280

SPC 4380 125.60 4410

SPC 4500 128.30 4530

SPC 4750 139.90 4780

SPC 5000 146.50 5030

SPC 5300 156.00 5330

SPC 5600 174.00 5630

SPC 6000 181.80 6030

SPC 6300 195.60 6330

SPC 6700 206.30 6730

SPC 7100 225.40 7130

SPC 7500 234.20 7530

SPC 8000 249.90 8030

SPC 8500 263.80 8530

SPC 9000 281.40 9030

SPC 9500 299.00 9530

SPC 10000 299.00 10030

SPC 10600 299.00 10630

SPC 11200 299.00 11230

SPC 11800 299.00 11830

SPC 12410 333.80 12440

SPC 12500 368.80 12530

SECTION “SPC” (22x18 mm)


M.E.C. V-BEL SP-OIL STAT

23

The Conventional M.E.C. V-BELT OIL STAT V-belts with narrow section according to US standards are identified by a symbol consisting of number followed by the letter V , which specifies the section (e.g. 3V ) and by another number (e.g. 800) which indicates the rated external development in tenths of an inch. This symbol is printed along the back of the belt. Resistant to temperatures from -30° to + 80°.

Compared to conventional belts, the 3-5-8 V belts make it possible to reduce space, and more specifically:

A) carry out transmissions of limited sizeB) can be used on motors with a high number of revolutions

C) use of cone pulleysD) lighter pulleysE) high transmission ratiosF) reduced distance between pulley centresG) electro-conductivity (ISO 1813)

Belt sections

The Conventional M.E.C. V-BELT 3-5- 8V V-belts are available in the sections indicated in the table below:

Compliant with standards RMA/MPTA IP22 - A3AE S 211-4

Sections Amm

Smm

Angle

3 V 9 8 38°

5 V 15 13 38°

8 V 25 23 38°

Belt identification


Minimum recommended pitch diameters pulleys:Sections 3V mm 63 5 V mm 100 8 V mm 140

M.E.C. M.E.C. V-BELT OIL STAT (3-5-8 V) BELTS with a narrow section according to US standards

24

Type € /pc. Rated outside Length

mm

3V 250 7.50 635

3V 265 8.00 675

3V 280 8.40 710

3V 300 9.00 760

3V 315 9.30 800

3V 335 9.70 850

3V 355 10.30 900

3V 375 10.80 955

3V 400 11.30 1015

3V 425 12.10 1080

3V 450 12.80 1145

3V 475 13.30 1205

3V 500 13.80 1270

3V 530 15.00 1345

3V 560 15.60 1420

3V 570 16.10 1448

3V 600 16.40 1525

3V 630 17.30 1600

3V 670 18.40 1700

3V 710 19.40 1805

3V 750 20.50 1905

3V 800 21.60 2030

3V 850 22.90 2160

3V 900 24.20 2285

3V 950 25.50 2415

3V 1000 26.70 2540

3V 1060 28.20 2690

3V 1120 29.50 2845

3V 1180 31.30 2995

3V 1250 33.20 3175

3V 1320 34.80 3355

3V 1400 36.80 3555

3V 1660 43.70 4217

SECTION “3V” (9x8 mm)


mm

5V 500 25.50 1270

5V 530 27.00 1345

5V 560 28.60 1420

5V 600 30.70 1525

5V 630 32.00 1600

5V 670 34.20 1700

5V 710 36.30 1805

5V 750 38.40 1905

5V 800 41.00 2030

5V 850 43.50 2160

5V 900 46.10 2285

5V 950 49.00 2415

5V 1000 51.40 2540

5V 1060 54.60 2690

5V 1120 57.20 2845

5V 1180 60.60 2995

5V 1250 64.30 3175

5V 1320 67.60 3355

5V 1400 72.10 3555

5V 1500 77.00 3810

5V 1600 82.40 4065

5V 1700 87.50 4320

5V 1800 92.60 4570

5V 1900 98.00 4825

5V 2000 102.90 5080

5V 2120 109.00 5385

5V 2240 115.20 5690

5V 2360 121.40 5995

5V 2500 129.00 6350

5V 2650 136.30 6730

5V 2800 144.40 7110

5V 3000 154.50 7620

5V 3150 162.40 8000

5V 3350 173.00 8515

5V 3550 182.90 9015


Inside length=Outside length - 71 mmtheoretical belt weight = 0.185 kg/ml


mm

8V 1000 122.90 2540

8V 1060 130.30 2690

8V 1120 137.90 2845

8V 1180 145.30 2995

8V 1250 154.30 3175

8V 1320 162.40 3355

8V 1400 173.00 3555

8V 1500 185.50 3810

8V 1600 197.60 4065

8V 1700 210.00 4320

8V 1800 222.00 4570

8V 1900 234.40 4825

8V 2000 247.30 5080

8V 2120 261.50 5385

8V 2240 276.20 5690

8V 2360 291.70 5995

8V 2500 309.10 6350

8V 2650 327.90 6730

8V 2800 346.10 7110

8V 3000 371.90 7620

8V 3150 389.70 8000

8V 3350 415.00 8515

8V 3550 439.60 9015

8V 3750 464.20 9550

8V 4000 495.50 10160

8V 4250 527.00 10800

8V 4500 557.00 11430

8V 4750 584.30 12050

8V 5000 620.00 12700



M.E.C. V-BELT OIL STAT (3-5-8V)


25

M.E.C. V-BELT OIL STAT SP-FTD are identified by letters which specify the section (e.g. SPZ) and by a number (e.g. 900) which corresponds to a certain rated pitch length in mm.

SP-FTD belts are especially suited to heavy-duty conditions and with technical limits. Use of these belts is recommended when:

A) pulleys have smaller diameters than the standard requiresB) transmissions have a high number of revolutionsC) there is a surplus of power requirementsD) electro-conductivity (ISO 1813)

Belt sections

M.E.C. V-BELT SP-FTD OIL STAT narrow section V-belt according to DIN standards with notched, raw edges are available in the sections shown in the table below:

DIN 7753 - ISO 4184 compliant

Sections Amm

Smm

Angle

SPZ 9.7 8 38°

SPA 12.7 10 38°

SPB 16.3 13 38°

SPC 22 18 38°

Belt identification


Minimum recommended pitch pulley diameters:

Sections SPZ mm 56 SPA mm 71 SPB mm 112 SPC mm210

N.B.: The M.E.C. V-BELT OIL STAT SP-FTD belts (with notched raw edges) are the result of a highly advanced production system using blends of high quality rubber. The light weight of the belt reduces centrifugal force, thus providing greater speed; the forged notches afford greater flexibility,

nd consequently a higher frequency of flexure and faster heat dispersion (resistant to temperatures from -30° to + 80° C)


M.E.C. V-BELT OIL STAT SP-FTD BELTS with narrow section according to DIN standards and with notched raw edges

26

Type € /pc. Rated outside

Length mm

FTD -SPZ 512 8.80 525

FTD -SPZ 587 8.80 600

FTD -SPZ 607 8.80 620

FTD -SPZ 612 8.80 625

FTD -SPZ 630 9.20 643

FTD -SPZ 637 9.20 650

FTD -SPZ 662 9.20 675

FTD -SPZ 670 9.20 683

FTD -SPZ 687 9.20 700

FTD -SPZ 710 9.20 723

FTD -SPZ 722 9.20 735

FTD -SPZ 737 9.20 750

FTD -SPZ 750 9.20 763

FTD -SPZ 762 9.20 775

FTD -SPZ 787 9.20 800

FTD -SPZ 800 9.20 813

FTD -SPZ 812 9.70 825

FTD -SPZ 825 9.70 838

FTD -SPZ 837 9.70 850

FTD -SPZ 850 9.70 863

FTD -SPZ 862 9.70 875

FTD -SPZ 887 9.70 900

FTD -SPZ 900 9.70 913

FTD -SPZ 912 10.60 925

FTD -SPZ 937 10.60 950

FTD -SPZ 950 10.60 963

FTD -SPZ 960 10.60 973

FTD -SPZ 962 10.60 975

FTD -SPZ 987 10.60 1000

FTD -SPZ 1000 10.60 1013

FTD -SPZ 1012 10.60 1025

FTD -SPZ 1037 11.60 1050

FTD -SPZ 1060 11.60 1073

FTD -SPZ 1077 11.60 1090

FTD -SPZ 1087 11.60 1100

FTD -SPZ 1112 11.60 1125

FTD -SPZ 1120 11.60 1133

FTD -SPZ 1137 13.00 1150

FTD -SPZ 1140 13.00 1153

FTD -SPZ 1147 13.00 1160

FTD -SPZ 1162 13.00 1175

FTD -SPZ 1180 13.00 1193

FTD -SPZ 1187 13.00 1200

FTD -SPZ 1202 13.50 1215




Length mm

FTD -SPZ 1212 13.50 1225

FTD -SPZ 1237 13.50 1250

FTD -SPZ 1250 13.50 1263

FTD -SPZ 1262 13.50 1275

FTD -SPZ 1270 14.50 1283

FTD -SPZ 1287 14.50 1300

FTD -SPZ 1312 14.50 1325

FTD -SPZ 1320 14.50 1333

FTD -SPZ 1337 15.80 1350

FTD -SPZ 1340 15.80 1358

FTD -SPZ 1362 15.80 1375

FTD -SPZ 1387 15.80 1400

FTD -SPZ 1400 15.80 1413

FTD -SPZ 1412 15.80 1425

FTD -SPZ 1437 16.20 1450

FTD -SPZ 1462 16.20 1475

FTD -SPZ 1487 16.20 1500

FTD -SPZ 1500 16.20 1513

FTD -SPZ 1512 16.20 1525

FTD -SPZ 1537 17.70 1550

FTD -SPZ 1562 17.70 1575

FTD -SPZ 1587 17.70 1600

FTD -SPZ 1600 17.70 1613

FTD -SPZ 1612 17.70 1625

FTD -SPZ 1637 18.70 1650

FTD -SPZ 1650 18.70 1663

FTD -SPZ 1662 18.70 1675

FTD -SPZ 1687 18.70 1700

FTD -SPZ 1700 18.70 1713

FTD -SPZ 1737 19.60 1750

FTD -SPZ 1762 19.60 1775

FTD -SPZ 1787 19.60 1800

FTD -SPZ 1800 19.60 1813

FTD -SPZ 1812 20.60 1825

FTD -SPZ 1850 20.60 1863

FTD -SPZ 1862 20.60 1875

FTD -SPZ 1887 20.60 1900

FTD -SPZ 1900 20.60 1913

FTD -SPZ 1937 22.90 1950

FTD -SPZ 1962 22.90 1975

FTD -SPZ 1987 22.90 2000

FTD -SPZ 2000 22.90 2013

FTD -SPZ 2019 24.20 2032

FTD -SPZ 2120 24.20 2133



Length mm

FTD -SPZ 2240 25.50 2253

FTD -SPZ 2360 26.70 2373

FTD -SPZ 2500 28.50 2513

FTD -SPZ 2650 30.00 2663

FTD -SPZ 2800 31.50 2813

FTD -SPZ 3000 37.30 3013

FTD -SPZ 3150 39.00 3163

FTD -SPZ 3350 41.30 3363

FTD -SPZ 3550 43.70 3563



Length mm

FTD -SPA 710 11.40 728

FTD -SPA 732 12.10 750

FTD -SPA 757 12.40 775

FTD -SPA 782 12.40 800

FTD -SPA 800 12.40 818

FTD -SPA 807 12.40 825

FTD -SPA 812 13.50 830

FTD -SPA 832 13.50 850

FTD -SPA 850 13.50 868

FTD -SPA 857 13.50 875

FTD -SPA 882 13.50 900

FTD -SPA 900 13.50 918

FTD -SPA 907 14.80 925

FTD -SPA 925 14.80 943

FTD -SPA 932 14.80 950

FTD -SPA 950 14.80 968

FTD -SPA 957 14.80 975

FTD -SPA 982 14.80 1000

FTD -SPA 1000 14.80 1018

FTD -SPA 1007 14.80 1025

FTD -SPA 1012 17.50 1030

FTD -SPA 1032 17.50 1050

FTD -SPA 1060 17.50 1078

FTD -SPA 1082 17.50 1100


M.E.C. V-BELT OIL STAT SP-FTD

27

Type € /pc.Rated

outside Length

mm

FTD -SPA 1107 17.50 1125

FTD -SPA 1120 17.50 1138

FTD -SPA 1132 18.90 1150

FTD -SPA 1150 18.90 1168

FTD -SPA 1157 18.90 1175

FTD -SPA 1180 18.90 1198

FTD -SPA 1207 18.90 1225

FTD -SPA 1232 18.90 1250

FTD -SPA 1250 18.90 1268

FTD -SPA 1257 18.90 1275

FTD -SPA 1272 20.60 1290

FTD -SPA 1282 20.60 1300

FTD -SPA 1307 20.60 1325

FTD -SPA 1320 20.60 1338

FTD -SPA 1357 21.20 1375

FTD -SPA 1382 21.20 1400

FTD -SPA 1400 21.20 1418

FTD -SPA 1407 21.20 1425

FTD -SPA 1432 23.50 1450

FTD -SPA 1457 23.50 1475

FTD -SPA 1500 23.50 1518

FTD -SPA 1507 23.50 1525

FTD -SPA 1532 23.70 1550

FTD -SPA 1557 23.70 1575

FTD -SPA 1582 23.70 1600

FTD -SPA 1600 23.70 1618

FTD -SPA 1607 23.70 1625

FTD -SPA 1632 26.00 1650

FTD -SPA 1650 26.00 1668

FTD -SPA 1682 26.00 1700

FTD -SPA 1700 26.00 1718

FTD -SPA 1707 26.90 1725

FTD -SPA 1732 26.90 1750

FTD -SPA 1757 26.90 1775

FTD -SPA 1782 26.90 1800

FTD -SPA 1800 26.90 1818

FTD -SPA 1807 27.20 1825

FTD -SPA 1832 27.20 1850

FTD -SPA 1857 28.10 1875

FTD -SPA 1882 28.10 1900

FTD -SPA 1900 28.10 1918

FTD -SPA 1907 31.00 1925

FTD -SPA 1932 31.00 1950

FTD -SPA 1957 31.00 1975

FTD -SPA 1982 31.40 2000

FTD -SPA 2000 31.70 2018

FTD -SPA 2032 32.20 2050

FTD -SPA 2057 33.00 2075

FTD -SPA 2120 33.40 2138

FTD -SPA 2240 34.40 2258

FTD -SPA 2282 35.50 2300


Type € /pc.Rated

outside Length

mm

FTD -SPA 2300 35.80 2318

FTD -SPA 2307 36.70 2325

FTD -SPA 2360 36.70 2378

FTD -SPA 2482 38.40 2500

FTD -SPA 2500 38.80 2518

FTD -SPA 2650 41.10 2668

FTD -SPA 2732 43.40 2750

FTD -SPA 2800 43.50 2818

FTD -SPA 3000 51.60 3018

FTD -SPA 3150 54.30 3168

FTD -SPA 3350 57.70 3368

FTD -SPA 3550 60.80 3568

FTD -SPA 3750 64.30 3768

Type € /pc.Rated

outside Length

mm

FTD -SPB 1250 26.60 1272

FTD -SPB 1270 27.20 1292

FTD -SPB 1285 27.20 1307

FTD -SPB 1320 27.90 1342

FTD -SPB 1340 28.00 1362

FTD -SPB 1360 28.10 1382

FTD -SPB 1400 28.50 1422

FTD -SPB 1450 31.30 1472

FTD -SPB 1470 32.00 1492

FTD -SPB 1500 32.40 1522

FTD -SPB 1550 33.30 1572

FTD -SPB 1600 34.40 1622

FTD -SPB 1650 35.60 1672

FTD -SPB 1690 36.30 1712

FTD -SPB 1700 36.70 1722

FTD -SPB 1750 38.50 1772

FTD -SPB 1800 38.50 1822

FTD -SPB 1860 41.20 1882

FTD -SPB 1900 41.20 1922

FTD -SPB 1950 45.00 1972

FTD -SPB 2000 46.00 2022

FTD -SPB 2060 47.00 2082

FTD -SPB 2120 48.60 2142

FTD -SPB 2180 50.00 2202

FTD -SPB 2182 51.00 2204

FTD -SPB 2240 52.00 2262

FTD -SPB 2360 54.60 2382

FTD -SPB 2430 57.00 2452

FTD -SPB 2500 59.00 2522

FTD -SPB 2530 59.20 2552

Type € /pc.Rated

outside Length

mm

FTD -SPB 2580 59.90 2602

FTD -SPB 2600 61.00 2622

FTD -SPB 2650 61.70 2672

FTD -SPB 2800 64.90 2822

FTD -SPB 2840 65.00 2862

FTD -SPB 2900 68.00 2922

FTD -SPB 3000 78.30 3022

FTD -SPB 3150 83.50 3172

FTD -SPB 3250 87.90 3272

FTD -SPB 3350 89.80 3372

FTD -SPB 3450 92.80 3472

FTD -SPB 3550 95.30 3572

FTD -SPB 3650 100.50 3672

FTD -SPB 3750 100.50 3772

FTD -SPB 3870 105.70 3892

FTD -SPB 4000 107.30 4022

FTD -SPB 4250 111.20 4272

FTD -SPB 4370 117.00 4392

FTD -SPB 4500 120.90 4522

FTD -SPB 4750 131.10 4772

FTD -SPB 5000 142.70 5022


Type € /pc.Rated

outside Length

mm

FTD -SPC 2000 81.20 2030

FTD -SPC 2120 83.40 2150

FTD -SPC 2240 93.40 2270

FTD -SPC 2280 93.40 2310

FTD -SPC 2360 96.70 2390

FTD -SPC 2500 102.30 2530

FTD -SPC 2650 108.60 2680

FTD -SPC 2800 114.50 2830

FTD -SPC 3000 134.80 3030

FTD -SPC 3150 135.20 3180

FTD -SPC 3350 135.90 3380

FTD -SPC 3550 144.00 3580

FTD -SPC 3750 155.10 3780

FTD -SPC 4000 163.30 4030

FTD -SPC 4250 173.90 4280

FTD -SPC 4500 183.00 4530

FTD -SPC 4750 193.30 4780

FTD -SPC 5000 228.40 5030


M.E.C. V-BELT OIL STAT SP-FTD

SECTION “SPA” (12.7x10 mm) SECTION “SPB” (16.3x13 mm)


SECTION “SPC” (22x18 mm)


28

M.E.C. V-BELT OIL STAT (3-5 V) FTD BELTS with narrow section according to US standards with notched raw edges

3-5V-FTD belts are especially suited to heavy-duty conditions and with technical limits. Use of these belts is recommended when:

A) pulleys have smaller diameters than the standard requiresB) transmissions have a high number of revolutionsC) there is a surplus of power requirements

Compliant with standards RMA/MPTA IP22

The Conventional M.E.C. V-BELT OIL STAT 3 and 5V FTD V-belts are identified by a symbol consisting of a number followed by the letter V, which specifies the section (e.g. 3V ) and by another number (e.g. 800) which indicates the rated external development in tenths of a inch. This symbol is printed along the back of the belt.

Belt sections

The Conventional M.E.C. V-BELT 3 and 5V FTD OIL STAT V-belts with narrow section according to US standards with notched raw edges are available in the sections indicated in the table below:

Sections Amm

Smm

Angle

3 V 9 8 38°

5 V 15 13 38°

Belt identification


N.B.: The M.E.C. V-BELT OIL STAT 3 and 5V FTD belts (with notched raw edges) are the result of a highly advanced production system using blends of high quality rubber. The light weight of the belt reduces centrifugal force, thus providing greater speed; the forged notches afford greater flexibility, and consequently a higher frequency of flexure and faster heat dispersion (resistant to temperatures from -30° to + 80° C )


29



Length mm

FTD -3V 250 8.70 635

FTD -3V 265 9.30 675

FTD -3V 280 9.60 710

FTD -3V 300 10.40 760

FTD -3V 315 10.60 800

FTD -3V 335 11.10 850

FTD -3V 355 11.80 900

FTD -3V 375 12.60 955

FTD -3V 400 13.20 1015

FTD -3V 425 13.70 1080

FTD -3V 450 14.80 1145

FTD -3V 475 15.30 1205

FTD -3V 500 16.20 1270

FTD -3V 530 16.80 1345

FTD -3V 560 18.00 1420

FTD -3V 600 18.80 1525

FTD -3V 630 19.80 1600

FTD -3V 670 21.10 1700

FTD -3V 710 22.40 1805

FTD -3V 750 23.40 1905

FTD -3V 800 24.90 2030

FTD -3V 850 26.30 2160

FTD -3V 900 27.80 2285

FTD -3V 950 29.20 2415

FTD -3V 1000 30.80 2540

FTD -3V 1060 33.00 2692

FTD -3V 1500 46.60 3810

Inside length =Outside length - 42 mm.theoretical belt weight = 0.065 kg/ml



Length mm

FTD -5V 500 29.20 1270

FTD -5V 530 31.00 1345

FTD -5V 560 32.80 1420

FTD -5V 600 35.30 1525

FTD -5V 630 36.80 1600

FTD -5V 670 39.40 1700

FTD -5V 710 41.40 1805

FTD -5V 750 44.30 1905

FTD -5V 800 47.10 2030

FTD -5V 850 50.20 2160

FTD -5V 900 52.90 2285

FTD -5V 950 56.60 2415

FTD -5V 1000 59.00 2540

FTD -5V 1060 62.60 2692

FTD -5V 1500 88.50 3810

FTD -5V 1800 106.20 4572

FTD -5V 1900 112.10 4826

Inside length =Outside length - 71 mm.theoretical belt weight = 0.173 kg/ml

M.E.C. V-BELT OIL STAT (3-5V) FTD

30

The polyester inserts along their centre make ESABELT belts extremely flexible, yet virtually non-stretch.

They are ideal for transmissions consisting of multiple belt pulleys in counter rotation. They can be used in different sectors, e.g. for agricultural and textile machinery.

Compliant with standards RMA/MPTA IP21 - DIN 7722 - ISO 5289

ESABELT hexagonal belts are identified by a double letter which specifies the section (e.g. AA ) and by a number (e.g. 75) which corresponds to a specific rated internal length.

Belt sections

The M.E.C. ESABELT OIL STAT hexagonal belts are available in the sections indicated in the table below:

Sections LPmm

Smm

Angle

AA 13 10 38°

BB 17 14 38°

CC 22 19 38°

Belt identification

The pitch length can be calculated from the internal length by adding or subtracting the following values:AA = + 53BB = + 74CC = +107

Minimum recommended pitch pulleysdiameters:

Sections AA mm 80 BB mm 125 CC mm 225

M.E.C. ESABELT OIL STAT BELTS

31

Type € /pc. Rated pitch lengthmm

AA 68 54.60 1780

AA 75 58.00 1955

AA 80 60.60 2085

AA 85 62.80 2210

AA 90 65.30 2340

AA 96 68.40 2490

AA 105 72.60 2720

AA 108 73.50 2795

AA 112 76.30 2895

AA 116 78.20 3000

AA 120 80.20 3100

AA 128 84.10 3305

AA 131 88.00 3380

SECTION “AA”

Theoretical belt weight = 0.144 kg/ml


BB 75 70.60 1980

BB 81 74.90 2130

BB 83 75.70 2175

BB 85 77.30 2235

BB 90 80.80 2360

BB 97 85.70 2540

BB 105 90.80 2740

BB 112 95.70 2920

BB 120 100.90 3125

BB 128 106.40 3325

BB 135 117.30 3500

BB 144 117.30 3735

BB 146 124.30 3785

BB 154 124.30 4000

BB 158 126.70 4090

BB 173 136.70 4470

BB 180 141.10 4645

BB 195 151.50 5030

BB 210 161.70 5410

BB 240 180.60 6135

BB 270 200.40 6895

BB 300 220.50 7655

SECTION “BB”



CC 75 117.50 2015

CC 81 123.20 2165

CC 85 127.20 2265

CC 90 132.20 2395

CC 96 138.20 2545

CC 105 147.10 2775

CC 112 154.20 2955

CC 120 161.90 3155

CC 128 169.60 3360

CC 135 185.50 3535

CC 144 185.50 3765

CC 153 194.80 4000

CC 158 199.40 4120

CC 162 203.30 4225

CC 173 213.70 4500

CC 180 221.20 4680

CC 193 234.00 5000

CC 195 236.00 5060

CC 210 250.60 5440

CC 234 272.70 6000

CC 240 278.40 6155

CC 257 297.60 6635

CC 270 307.90 6915

CC 300 337.80 7675

CC 313 351.10 8000

CC 330 367.30 8440

CC 360 396.70 9200

CC 390 426.50 9965

CC 420 455.50 10725

SECTION “CC”


M.E.C. ESABELT OIL STAT BELTS

32

Belt identification

These are heat-resistant, oil-resistant, anti-static belts (ISO 1813).They are specifically used with variable pulleys and therefore are mainly used in speed variators (textile, paper, chemical industries, etc.).

Compliant with ISO 1604 standard (only W)

The M.E.C. VARIBELT belts are identified by a symbol consisting of three numbers ( e.g. 22 x8 x 1000 ) followed by the letters Li. The first number indicates the width of the broad base, the second indicates the thickness and the third the inside length. This symbol is printed on the belt. The rated pitch length is the length of the belt measured at the pitch width (Lp).

Belt sections

The Conventional M.E.C. VARIBELT OIL STAT V-belts for industrial type continuous speed variators are available in the sections indicated below:

Standards ISO

A x Bmm

Width Pitchmm

Angle

13 x 6 12 26°

W 16 = 17 x 5 16 26°

W 20 = 21 x 6.5 20 26°

22 x 8 21 26°

W 25 = 26 x 8 25 26°

28 x 10 27 26°

W 31.5 = 33 x 10 31.5 26°

36 x 12 34.5 30°

W 40 = 42 x 13 40 30°

46 x 13 44.5 30°

W 50 = 56 x 16 50 30°

54 x 16 52 30°

W 63 = 65 x 20 63 30°

70 x 20 68 30°

W 80 = 83 x 25 80 30°

From the rated pitch length it is possible to calculate:1) the rated outside length, by adding the K value2) the rated inside length, by subtracting W valueThe K and W values are shown in the following table:

Belt Thickness = B

B 5 6 6.5 8 10 12 13 16 20 25

K

W

8

24

9

30

10

31

12

38/40

16

47/50

19

22

21

60/61

25

75

31

94/95

40

120


M.E.C. VARIBELT OIL STAT BELTS

Angle

Pitch width

33

Rated insidelength mm

€ /pc. Rated pitchlength mm

475 55.70 505

500 56.90 530

525 57.60 555

550 58.70 580

600 58.80 630

625 61.50 655

650 61.90 680

675 62.70 705

700 63.30 730

•725 64.40 755

750 65.20 780

775 66.00 805

800 66.90 830

850 68.20 880

900 70.40 930

•950 71.80 980

1000 73.20 1030

1060 75.00 1090

1120 77.30 1150

1180 79.10 1210

1250 81.30 1280

1320 83.80 1350

1400 86.40 1430

SECTION 13 x 6 mm



476 56.20 500

536 58.20 560

606 60.30 630

686 63.00 710

776 66.90 800

876 69.60 900

976 73.20 1000



599 62.60 630

769 69.60 800

869 72.30 900

969 76.90 1000

1089 81.30 1120

•1219 86.10 1250

SECTION 21 x 6,5 mm according to ISO W 20 standard

SECTION 22 x 8 mm



•500 60.20 540

525 61.40 565

550 62.30 590

575 63.20 615

600 64.40 640

•625 65.20 665

650 66.50 690

•675 67.40 715

700 68.40 740

725 69.50 765

750 70.50 790

775 71.20 815

800 72.50 840

850 74.80 890

900 76.80 940

950 78.70 990

1000 80.90 1040

1060 83.40 1100

1120 86.00 1160

1180 88.50 1220

1250 91.20 1290

1320 94.00 1360

1400 97.30 1440

1600 105.50 1640

•1800 113.60 1840

1900 118.10 1940

2000 122.00 2040



672 71.20 710

762 76.10 800

862 80.70 900

962 85.00 1000

1082 90.70 1120

1212 96.10 1250

1362 104.40 1400

1562 111.70 1600



•789 81.70 830



•512 75.60 563

•690 80.70 740

850 84.10 890

•1060 105.10 1100

M.E.C. VARIBELT OIL STAT BELTS

• End of stock measurements

Measurements marked with (•) are produced upon request, with the quantity supplied to be agreed upon in advance.

SECTION 26 x 8 mm according to ISO W 25 standard




34



•625 73.20 675

650 74.30 700

675 76.10 725

700 77.90 750

•725 88.80 775

750 90.30 800

800 92.90 850

850 95.70 900

900 98.60 950

950 101.80 1000

1000 104.50 1050

1060 108.10 1110

1120 111.40 1170

1180 114.70 1230

1250 118.90 1300

•1320 122.80 1370

1400 127.30 1450

1500 133.20 1550

1600 138.90 1650

1700 145.00 1750

1800 149.10 1850

•2000 161.10 2050

SECTION 28 x 10 mm



•803 102.40 850

SECTION 32 x 10 mm



853 102.40 900

953 108.10 1000

1073 115.20 1120

1203 123.70 1250

•1353 133.50 1400

•1753 163.90 1800

1953 171.00 2000

SECTION 36 x 12 mm



600 95.70 655

625 98.90 680

650 100.60 705

700 104.80 755

•725 106.60 780

•750 108.10 805

800 112.30 855

850 116.20 905

900 119.90 955

950 123.90 1005

960 124.50 1015

1000 127.30 1055

1060 132.10 1115

1120 136.70 1175

1180 141.10 1235

1250 146.30 1305

1320 151.80 1375

1400 158.00 1455

1500 165.60 1555

1600 173.00 1655

1700 180.30 1755

1800 188.00 1855

1900 194.00 1955

2000 203.40 2055

2120 212.60 2175

2240 221.30 2295



1059 150.00 1120

1189 161.10 1250

•1249 170.10 1310

1339 174.60 1400

1539 192.20 1600

1739 210.40 1800

1939 227.80 2000

2179 250.50 2240

2439 272.50 2500

SECTION 46 x 13 mm



795 132.70 855

845 138.20 905

870 140.10 930

895 142.80 955

995 152.40 1055

1055 158.40 1115

1120 164.00 1175

1140 165.60 1200

1175 169.70 1235

1245 176.40 1305

1315 183.40 1375

1395 190.80 1455

1430 192.90 1490

1495 200.40 1555

1560 204.90 1620

•1595 210.20 1655

1635 213.20 1695

1695 219.50 1755

1795 229.40 1855

1895 238.30 1955

•1915 245.40 1975

2000 248.10 2060

•2120 253.40 2180

2210 267.90 2270

2240 272.00 2300

M.E.C. VARIBELT OIL STAT



SECTION 37 x 10 mm



•1022 115.2 1070

SECTION 40 x 14 mm



•1700 209.30 1760


SECTION 33 x 10 mm according to ISO W 31.5 standard

35



•2400 285.50 2460

2800 323.80 2860

SECTION 46 x 13 mm



1325 236.80 1400

1525 256.00 1600

1725 288.20 1800

1925 313.80 2000

2165 344.90 2240

2425 377.60 2500

2725 416.90 2800

3075 460.80 3150



•1506 353.90 1600

1706 390.50 1800

•2146 496.10 2240

2406 515.70 2500

2706 569.80 2800

3056 632.10 3150

•3456 703.20 3550

SECTION 70 x 20 mm



1400 357.00 1495

1500 376.60 1595

1700 414.90 1795

1710 416.20 1805

1800 433.90 1895

2000 471.30 2095

2065 482.90 2160

2120 494.20 2210

2240 517.90 2330

2360 540.40 2450

•2500 567.30 2590

2800 625.50 2890



•1880 673.90 2000

•2120 694.90 2240

2380 766.10 2500

2680 847.50 2800

•3430 1051.50 3550



1180 233.70 1255

1250 235.40 1325

•1320 240.60 1395

1400 255.10 1475

1500 267.20 1575

1600 281.70 1675

1800 307.90 1875

•2000 335.20 2075

•2240 366.70 2315

SECTION 54 x 16 mm



M.E.C. VARIBELT OIL STAT



•855 139.20 915

SECTION 50 x 13 mm



•1500 265.20 1545

SECTION 54 x 14 mm




36

Recommended minimum external diameter

Compliant with ISO 8419 standard

Sections mm

A 80

B 125

C 200

3V 70

5V 180

8V 315

The M.E.C. MULTIBELT belts consist of conventional M.E.C. V-BELT belts, sections A -B - C - and M.E.C. V-BELT with narrow section according to US standards 3, 5, 8 V joined by units of 2 to 5 elements. Since they are joined together, these belts ensure:

A) no tapping noisesB) an even load distribution on individual componentsC) stability - they do not tip and therefore will not come out of the racesThe M.E.C. MULTIBELT belts are for use on grinding and crushing machines, road-building machines, vibrating screens and combine-harvesters.

Sections Base Height

A 13 9.90

B 17 13

C 22 16.1

3V 9 9.9

5V 15 15.1

8V 25 25.5

M.E.C. MULTIBELT OIL STAT BELTS

Minimum supply varies according to number of components

Upon request multiple section belts SPA SPB and SPC can be supplied

37

Type Cost per element

€

Rated insideLength mm

A 40 1016

A 41 1041

A 42 1067

A 43 1092

A 43 ½ 1105

A 44 1120

A 44 ½ 1132

A 45 1143

A 46 1168

A 47 1200

A 48 1220

A 49 1250

A 50 1270

A 51 1300

A 51 ½ 1307

A 52 1320

A 52 ½ 1337

A 53 1346

A 53 ¼ 1355

A 54 1372

A 55 1400

A 56 1422

A 57 1450

A 58 1475

A 59 1500

A 60 1525

A 61 1550

A 62 1575

A 63 1600

A 64 1625

A 65 1650

A 66 1676

A 67 1700

A 68 1725

A 69 1750

A 70 1775

A 71 1800

A 72 1825

A 73 1854

A 74 1880

A 75 1900

A 76 1930

SECTION “A” (13x9.9 mm)


€


A 77 1956

A 78 1980

A 79 2000

A 80 2032

A 81 2060

A 82 2083

A 83 2100

A 84 2134

A 85 2160

A 86 2187

A 87 2212

A 88 2240

A 90 2286

A 91 2311

A 92 2337

A 93 2360

A 94 2388

A 95 2413

A 96 2438

A 97 2464

A 97 ½ 2475

A 98 2500

A 100 2540

A 102 2591

A 104 2650

A 105 2667

A 107 2725

A 108 2743

A 110 2800

A 112 2845

A 113 2870

A 116 2946

A 118 3000

A 120 3048

SECTION “A” (13x9.9 mm)


€


B 60 1525

B 61 1550

B 62 1575

B 63 1600

B 64 1625

B 64 ½ 1642

B 65 1650

B 66 1676

B 66 ¼ 1682

B 66 ½ 1692

B 67 1700

B 67 ¼ 1712

B 68 1725

B 69 1750

B 69 ½ 1761

B 70 1775

B 71 1800

B 72 1829

B 73 1850

B 74 1880

B 75 1900

B 76 1930

B 78 1981

B 79 2000

B 80 2032

B 81 2060

B 82 2083

B 83 2108

B 84 2134

B 85 2160

B 86 2187

B 87 2215

B 88 2240

B 89 2261

B 90 2286

B 91 2312

B 92 2337

B 93 2360

B 94 2388

B 95 2413

B 96 2438

B 97 2465

SECTION “B” (17x13 mm)


ON

RE

QU

ES

T

ON

RE

QU

ES

T

ON

RE

QU

ES

T

38


€


B 97 ½ 2477

B 98 2500

B 99 2515

B 100 2540

B 102 2600

B 103 2616

B 104 2650

B 105 2667

B 106 2700

B 107 2718

B 108 2750

B 110 2800

B 112 2845

B 112 ½ 2857

B 114 2900

B 115 2921

B 116 2950

B 118 3000

B 120 3048

B 124 3150

B 127 3227

B 128 3250

B 130 3302

B 131 3327

B 132 3350

B 133 3378

B 134 3407

B 135 3429

B 136 3450

B 140 3550

B 144 3658

B 147 3737

B 148 3750

B 151 3850

B 152 3891

B 154 3912

B 157 3987

B 158 4000

B 161 4087

B 162 4115

B 163 4142

B 165 4200



€


B 167 4250

B 168 4267

B 173 4394

B 175 4450

B 177 4500

B 180 4572

B 186 4727

B 188 4777

B 192 4877

B 195 4953

B 197 5000

B 204 5182

B 208 5285

B 210 5334

B 214 5436

B 221 5615

B 223 5664

B 224 5690

B 225 5715

B 226 5740

B 229 5816

B 237 6020

B 240 6096

B 248 6300

B 249 6325

B 253 6425

B 255 6477

B 259 6579

B 265 6730

B 270 6858

B 276 7010

B 280 7112

B 285 7240

B 300 7620

B 315 8000

B 330 8382



€


C 60 1524

C 62 ½ 1583

C 63 1600

C 65 1650

C 68 1727

C 70 1778

C 75 1900

C 80 2032

C 81 2057

C 83 2108

C 85 2159

C 90 2286

C 93 2360

C 95 2413

C 96 2438

C 97 2462

C 97 ½ 2477

C 98 2500

C 99 2525

C 100 2540

C 101 2560

C 102 2591

C 104 2642

C 105 2667

C 106 2692

C 108 2750

C 110 2800

C 112 2845

C 112 ½ 2858

C 115 2921

C 116 2950

C 118 3000

C 120 3048

C 124 3150

C 128 3250

C 130 3302

C 132 3350

C 134 3404

C 136 3456

C 140 3550

C 142 3607

C 144 3658

SECTION “C” (22x16.1 mm)


ON

RE

QU

ES

T

ON

RE

QU

ES

T

ON

RE

QU

ES

T

39


€


C 147 3733

C 148 3750

C 153 3902

C 158 4000

C 160 4064

C 162 4115

C 165 4193

C 166 4216

C 168 4267

C 170 4318

C 173 4394

C 175 4445

C 177 4500

C 180 4572

C 187 4750

C 193 4900

C 195 4953

C 197 5000

C 204 5182

C 208 5285

C 210 5334

C 212 5384

C 216 5486

C 222 5638

C 225 5715

C 228 5792

C 230 5842

C 238 6045

C 240 6096

C 248 6300

C 250 6350

C 255 6477

C 261 6629

C 265 6730

C 268 6807

C 270 6858

C 276 7010

C 280 7112

C 285 7240

C 297 7544

C 300 7620

C 303 7696

C 314 7975

C 316 8026

C 330 8382

C 336 8535

C 345 8763

C 360 9145

C 394 10008

SECTION “C” (22x16.1 mm)


€


3V 355 858

3V 375 913

3V 400 973

3V 425 1038

3V 450 1103

3V 475 1163

3V 500 1228

3V 530 1303

3V 560 1378

3V 600 1483

3V 630 1558

3V 670 1658

3V 710 1763

3V 750 1863

3V 800 1988

3V 850 2118

3V 900 2243

3V 950 2373

3V 1000 2498

3V 1060 2648

3V 1120 2803

3V 1180 2953

3V 1250 3133

SECTION “3V” (9x9.9 mm)


€


5V 750 1834

5V 800 1959

5V 850 2089

5V 900 2214

5V 950 2344

5V 1000 2469

5V 1060 2619

5V 1120 2774

5V 1180 2924

5V 1250 3104

5V 1320 3284

5V 1400 3484

5V 1500 3739

5V 1600 3994

5V 1700 4249

5V 1800 4499

5V 1900 4754

5V 2000 5009

5V 2120 5314

5V 2240 5619



€


5V 2360 5924

5V 2500 6279

5V 2650 6659

5V 2800 7039

5V 3000 7549

5V 3150 7929

5V 3350 8445

5V 3550 8944



€


8V 1120 2725

8V 1180 2875

8V 1250 3055

8V 1320 3235

8V 1400 3435

8V 1500 3690

8V 1600 3945

8V 1700 4200

8V 1800 4450

8V 1900 4705

8V 2000 4960

8V 2120 5265

8V 2240 5570

8V 2360 5875

8V 2500 6320

8V 2650 6610

8V 2800 6990

8V 3000 7500

8V 3150 7880

8V 3350 8395

8V 3550 8895

8V 3750 9430

8V 4000 10040

8V 4250 10680

8V 4500 11310

8V 4750 11930

8V 5000 12580



ON

RE

QU

ES

T

ON

RE

QU

ES

TO

N R

EQ

UE

ST O

N R

EQ

UE

ST

ON

RE

QU

ES

T

40

M.E.C. MINI V BELT OIL STAT FT BELTS only raw edges

Minimum supply: 100 pieces for measurement 5W and 6Y and 25 pieces for 8T

M.E.C. MINI V-BELT OIL STAT FT V-beltsA) Resistant to oilB) Resistant to temperatures from - 30° to + 70° CC) Electro-conductiveD) Anti-dust

Sections ≈b°

mm≈h

mm

5/W 5 3

6/Y 6 4

8/T 8 5

10/Z 10 6

The M.E.C. MINI V-BELT OIL STAT FT belts are identified by a letter which specifies the section (e.g. Y = 6x4 ) and by a number which shows the rated outside length.

41

Type €Component


W 205 FT 10.80 185

W 210 FT 10.80 190

W 250 FT 10.80 229

W 256 FT 10.80 236

W 280 FT 10.80 260

W 285 FT 10.80 265

W 290 FT 10.80 270

W 300 FT 10.80 280

W 307 FT 11.00 287

W 320 FT 11.00 300

W 323 FT 11.00 303

W 335 FT 11.00 315

W 342 FT 11.00 322

W 350 FT 11.00 330

W 355 FT 11.00 335

W 360 FT 11.00 340

W 365 FT 11.00 345

W 370 FT 11.00 350

W 378 FT 11.10 358

W 395 FT 11.10 375

W 426 FT 11.10 406

W 440 FT 11.10 420

W 445 FT 11.10 425

W 455 FT 11.20 435

W 460 FT 11.20 441

W 485 FT 11.20 465

W 490 FT 11.20 471

W 495 FT 11.20 475

W 515 FT 11.40 495

W 520 FT 11.40 500

W 535 FT 11.40 514

W 574 FT 11.40 554

W 620 FT 12.10 600

SECTION “5W” (5 x 3 mm) SECTION “6Y” (6 x 4 mm)

Type €Component


Y 265 FT 15.30 240

Y 275 FT 15.30 250

• Y 285 FT 15.30 260

• Y 290 FT 15.30 265

• Y 295 FT 15.30 270

Y 305 FT 15.30 280

Y 325 FT 15.30 300

Y 345 FT 15.60 320

Y 352 FT 15.60 327

Y 355 FT 15.60 330

Y 360 FT 15.60 335

Y 375 FT 15.90 350

Y 377 FT 15.90 352

•Y 385 FT 15.90 360

Y 395 FT 15.90 370

Y 397 FT 15.90 372

Y 400 FT 15.90 375

Y 405 FT 15.90 380

Y 425 FT 15.90 400

Y 450 FT 16.10 425

Y 475 FT 16.10 450

Y 500 FT 16.40 475

Y 525 FT 16.40 500

Y 565 FT 16.50 540

Y 575 FT 16.70 550

Y 605 FT 17.20 580

Y 625 FT 17.20 600

Y 665 FT 17.70 640

Y 700 FT 18.20 675

Y 875 FT 18.50 850

Y 925 FT 18.50 900

SECTION “8T” (8 x 5 mm)

Type €Component


T 310 FT 15.60 280

T 345 FT 15.60 315

T 360 FT 15.60 330

T 365 FT 15.70 335

T 385 FT 15.80 355

T 405 FT 16.20 375

T 430 FT 16.20 400

T 440 FT 16.20 410

T 455 FT 16.20 425

T 460 FT 16.20 430

T 480 FT 16.30 450

T 505 FT 16.40 475

T 560 FT 16.50 530

T 590 FT 16.50 560

T 610 FT 17.20 580

T 630 FT 17.20 600

T 660 FT 17.30 630

T 700 FT 17.70 670

T 710 FT 17.70 680

T 730 FT 17.80 700

T 740 FT 17.80 710

T 747 FT 18.00 717

T 780 FT 18.00 750

T 830 FT 18.40 800

T 860 FT 18.50 830

T 880 FT 18.50 850

•T 905 FT 18.80 875

T 930 FT 18.80 900

•T 980 FT 18.90 950

•T 1030 FT 19.40 1000

SECTION “10Z” (10 x 6 mm)

Type €Component


Z 400 FT 18.60 362

Z 475 FT 18.90 437

Z 1000 FT 23.60 962

M.E.C. MINI V-BELT OIL STAT FT

• Dimensions until stocks last

42

M.E.C. MINI V BELT OIL STAT FTD:A) Resistant to oilB) Resistant to temperatures from - 30° to + 80° CC) Electro-conductiveD) Anti-dust

Section ≈b°

mm≈h

mm

5/W 5 3

6/Y 6 4

8/T 8 5

The M.E.C. MINI V BELT OIL STAT FTD belts are identified by a letter which specifies the section (e.g. Y = 6x4 ) and by a number which shows the rated outside length.

Type Cost per element €


W 180 FTD 11.40 160

W 290 FTD 11.40 270

W 300 FTD 11.60 280

W 320 FTD 11.80 300

W 335 FTD 11.80 315

W 342 FTD 11.90 322

W 355 FTD 12.10 335

W 360 FTD 12.10 340

W 372 FTD 12.10 352

W 395 FTD 12.30 375

W 420 FTD 12.40 400

W 445 FTD 12.70 425

W 470 FTD 12.80 450

W 550 FTD 12.80 530

W 580 FTD 12.90 560

W 620 FTD 12.90 600

SECTION “5W” (5 x 3 mm) SECTION “6Y” (6 x 4 mm)



Y 295 FTD 16.20 270

Y 305 FTD 16.30 280

Y 325 FTD 16.40 300

Y 340 FTD 16.40 315

•Y 360 FTD 16.50 335

Y 365 FTD 16.50 339

Y 377 FTD 16.70 352

Y 400 FTD 16.70 375

Y 425 FTD 17.20 400

Y 450 FTD 17.20 425

Y 475 FTD 17.40 450

Y 520 FTD 17.50 495

Y 555 FTD 18.20 530

Y 585 FTD 18.40 560

Y 625 FTD 18.50 600

Y 875 FTD 19.60 850

SECTION “8T” (8 x 5 mm)



T 190 FTD 17.20 160

T 310 FTD 17.30 280

T 330 FTD 17.40 300

T 345 FTD 17.70 315

T 352 FTD 17.70 322

T 370 FTD 17.80 340

T 385 FTD 18.00 355

T 405 FTD 18.20 375

T 430 FTD 18.20 400

T 480 FTD 18.50 450

T 525 FTD 18.60 495

T 560 FTD 18.70 530

T 630 FTD 18.80 600

M.E.C. MINI V BELT OIL STAT FTD BELTS notched raw edges


43

Commercialname

mm inches mm inches (hundredths)

MXL 2,032 0.080 (2/25) 3,05-4,80-6,35-7,90-9,40 0,12-0,19-0,25-0,31-0,37

XL 5,080 0.200 (1/5) 6,35-7,90-9,40 0,25-0,31-0,37

L 9,525 0.375 (3/8) 12,70-19,05-25,40 0,50-0,75-100

H 12,700 0.500 (1/2) 19,05-25,40-38,10-50,80-76,20 0,75-100-150-200-300

XH 22,225 0.875 (7/8) 50,80-76,20-101,60 200-300-400

XXH 31,750 1.250 (11/4) 50,80-76,20-101,60-127 200-300-400-500

Standard WidthsPitch

The M.E.C. TIMING BELT belts are available in the following pitch distinguished by the commercial names shown to the side and the following standard widths:

Notched belts, made with neoprene rubber and fibreglass inserts, are the latest innovation in the field of transmissions, whereby movement is transmitted from the pulley to the belt and vice versa by reciprocal meshing

of the notches, as happens with gear transmission, with no slipping and precision timing. By virtue of their strength, these belts afford powerful transmission in limited space.

Classification of the M.E.C. TIMING BELT belts

The M.E.C. TIMING BELT belts are identified by letters which are preceded and followed by numbers which serve to identify pitch length, pitch and width respectively. The first number shows the value of the pitch length in tenths of an inch (hundredths of an inch for MXL). The letters show the pitch and hence the type of belt. The second number indicates the width in one hundredths of an inch.

Example:

A belt with a pitch development of 60 inches (1524 mm), pitch of 1/2 inch (12.7 mm) and width of 3/4 inch (19.05 mm) width , is written as follows:

600 H 075

Identification of the M.E.C. TIMING BELT belts

M.E.C. SYNCHRONOUS TIMING BELT BELTS for industrial transmissions

44

Table A - Tolerance on the width of M.E.C. TIMING BELT belts MXL, XL, L, H.

Tables A, B, C show the respective width, development and thickness tolerance of the M.E.C TIMING BELT belts.

The tolerance on the width of the XH and XXH type belts is +/- 4.8 mm for any width and development.

Belt Width Tolerance on Width (mm)

Width in hundredths of

an inch

Actual Width in mm

Over up to Over up to Over up to up to 33" pitchdevelopment

over 33" up to 66" pitch development

over 66" pitch development

- 050 - 1/2" - 12.7 + 0.4- 0.8

+ 0.4- 0.8

--

050 150 1/2" 1"/1/2 12.7 38.1 ± 0.8 +0.8- 1.2

+0.8- 1.2

150 200 1"/1/2 2" 38.1 50.8 +0.8- 1.2

± 1.2 +1.2- 1.6

200 300 2" 3" 50.8 76.2 +1.2- 1.6

± 1.6 +1.6- 2.0

Table B - Tolerance on development of M.E.C. TIMING BELT belts

over up toTolerance

mm

- 10 ± 0.40

10 15 ± 0.45

15 20 ± 0.50

20 30 ± 0.60

30 40 ± 0.65

40 50 ± 0.75

50 60 ± 0.80

60 70 ± 0.85

70 80 ± 0.90

80 90 ± 0.95

Belt length in ins.

over up toTolerance

mm

90 100 ± 1.00

100 110 ± 1.05

110 120 ± 1.10

120 130 ± 1.15

130 140 ± 1.20

140 150 ± 1.25

150 160 ± 1.30

160 170 ± 1.35

170 180 ± 1.40

Belt length in ins.

Table C - Thickness of the M.E.C. TIMING BELT belts and corresponding tolerance

TypeThickness

measured on notch mm

Degree oftolerance

mm

MXL 1.14 ± 0.6

XL 2.3 ± 0.6

L 3.6 ± 0.6

H 4.3 ± 0.6

XH 11.2 ± 0.6

XXH 15.7 ± 0.6

All M.E.C. TIMING BELT belts have a rectified outside surface and a special fibreglass insert ensuring fluid movement.

Sectiont

mmt

(")hs

mmht

mm

MXL 2.032 2/25 1.14 0.51

XL 5.08 1/5 2.3 1.27

L 9.525 3/8 3.6 1.90

H 12.7 1/2 4.3 2.29

XH 22.225 7/8 11.2 6.35

XXH 31.75 11/4 15.7 9.53

TOLERANCE OF THE M.E.C. TIMING BELT belts

45

MXL pitch 2/25” (mm 2.032)No. of

notchesType and pitch

length in hundredthsof an inch

012 in3.05 mm

€/pc.

019 in4.8 mm

€/pc.

025 in6.5 mm

€/pc.

031 in7.9 mm

€/pc.

037 in9.4 mm

€/pc.

54 432 MXL 2.80 3.60 4.90 5.50 6.60

55 440 MXL 2.80 3.60 5.00 5.50 6.60

56 448 MXL 2.80 3.70 5.00 5.80 6.60

58 464 MXL 2.80 3.70 5.00 5.80 6.60

60 480 MXL 2.80 3.70 5.00 5.80 6.70

67 536 MXL 2.90 3.80 5.00 6.00 7.10

68 544 MXL 2.90 3.80 5.00 6.00 7.10

70 560 MXL 2.90 3.80 5.00 6.00 7.10

71 568 MXL 2.90 3.80 5.00 6.00 7.10

72 576 MXL 2.90 3.80 5.10 6.00 7.10

75 600 MXL 2.90 3.80 5.20 6.00 7.20

77 616 MXL 2.90 3.80 5.20 6.10 7.20

80 640 MXL 2.90 3.80 5.20 6.10 7.20

82 656 MXL 2.90 3.80 5.20 6.10 7.20

84 672 MXL 2.90 3.80 5.20 6.30 7.20

85 680 MXL 2.90 3.80 5.20 6.40 7.40

87 696 MXL 2.90 3.80 5.20 6.40 7.40

88 704 MXL 2.90 3.80 5.20 6.40 7.40

90 720 MXL 2.90 3.80 5.30 6.40 7.40

92 736 MXL 2.90 3.80 5.30 6.40 7.40

94 752 MXL 2.90 3.80 5.30 6.40 7.40

95 760 MXL 2.90 4.00 5.30 6.40 7.40

97 776 MXL 2.90 4.00 5.40 6.40 7.40

100 800 MXL 2.90 4.00 5.50 6.60 7.50

101 808 MXL 2.90 4.00 5.50 6.60 7.50

103 824 MXL 3.00 4.00 5.50 6.60 7.50

105 840 MXL 3.00 4.30 5.50 6.60 7.50

106 848 MXL 3.00 4.30 5.50 7.10 7.50

110 880 MXL 3.00 4.30 5.50 7.10 7.50

112 896 MXL 3.00 4.30 5.50 7.10 7.50

113 904 MXL 3.00 4.30 5.50 7.10 7.70

114 912 MXL 3.00 4.30 5.50 7.10 7.70

118 944 MXL 3.00 4.30 5.70 7.10 7.80

120 960 MXL 3.00 4.30 5.70 7.10 7.80

122 976 MXL 3.00 4.30 5.70 7.20 7.80

123 984 MXL 3.00 4.50 5.70 7.20 7.80

125 1000 MXL 3.00 4.50 5.70 7.20 8.00

126 1008 MXL 3.00 4.50 5.70 7.20 8.00

132 1056 MXL 3.20 4.50 5.70 7.20 8.00

140 1120 MXL 3.20 4.50 5.70 7.20 8.00

150 1200 MXL 3.20 4.60 6.10 7.20 8.10

160 1280 MXL 3.40 4.90 6.40 7.40 8.20

164 •1312 MXL 3.40 4.90 6.40 7.40 8.20

165 1320 MXL 3.40 4.90 6.40 7.40 8.20

170 1360 MXL 3.40 4.90 6.40 7.70 8.60

No. of notches

Type and pitchlength in hundredths

of an inch

012 in3.05 mm

€/pc.

019 in4.8 mm

€/pc.

025 in6.5 mm

€/pc.

031 in7.9 mm

€/pc.

037 in9.4 mm

€/pc.

175 1400 MXL 3.40 4.90 6.40 7.70 8.60

180 1440 MXL 3.40 5.00 6.60 7.70 8.70

184 1472 MXL 3.40 5.00 6.60 7.70 8.70

225 1800 MXL 4.00 5.00 7.40 8.20 9.60

236 1880 MXL 4.00 5.30 7.40 8.20 9.60

251 •2008 MXL 4.90 6.00 8.00 8.70 10.40

298 2384 MXL 4.90 6.00 8.00 9.40 11.00

365 •2920 MXL 5.20 7.20 8.90 10.90 12.60

400 3200 MXL 5.20 7.20 8.90 10.90 12.60

421 •3296 MXL 5.30 7.40 8.90 11.00 13.00

434 •3472 MXL 5.50 7.50 9.40 11.30 13.00

463 3704 MXL 5.70 7.80 9.60 11.80 13.90

504 4030 MXL 6.30 8.90 10.60 12.90 15.10

546 4370 MXL 6.90 9.80 11.30 13.80 16.20

600 4800 MXL 7.50 10.60 12.60 15.30 17.90

656 5250 MXL 8.20 11.60 13.60 16.50 19.60

1030 8240 MXL 12.90 18.30 21.30 26.20 30.70

1463 11704 MXL 18.30 26.00 30.40 37.10 43.40

1516 12128 MXL 18.90 27.00 31.60 38.40 45.10

M.E.C. TIMING BELT belts

• End of stock measurementsAll measurements in black are produced upon request, with the quantity supplied to be agreed upon in advance.

46

XL pitch 1/5” (mm 5.080)No. of

notchesType and pitchlength in tenths

of an inch

025 in6.35 mm

€/pc.

031 in7.9 mm

€/pc.

037 in9.4 mm

€/pc.

27 •54 XL 3.20 4.30 4.80

30 •60 XL 3.40 4.30 4.90

33 •66 XL 3.60 4.50 5.00

35 70 XL 3.60 4.50 5.00

40 80 XL 3.60 4.60 5.20

43 86 XL 3.80 4.60 5.20

45 90 XL 3.80 4.60 5.20

46 92 XL 4.00 4.80 5.30

47 94 XL 4.00 4.80 5.30

48 96 XL 4.00 4.80 5.30

49 98 XL 4.00 4.80 5.30

50 100 XL 4.00 4.80 5.40

51 102 XL 4.00 4.80 5.40

53 106 XL 4.30 4.90 5.40

54 108 XL 4.30 4.90 5.40

55 110 XL 4.30 4.90 5.50

56 112 XL 4.40 5.00 5.70

57 114 XL 4.40 5.00 5.70

58 116 XL 4.40 5.00 5.70

59 118 XL 4.40 5.00 5.70

60 120 XL 4.40 5.00 5.70

62 124 XL 4.50 5.20 5.80

63 126 XL 4.50 5.20 5.80

65 130 XL 4.50 5.20 5.80

67 134 XL 4.60 5.20 6.10

68 136 XL 4.60 5.20 6.10

69 138 XL 4.60 5.20 6.10

70 140 XL 4.60 5.20 6.10

72 144 XL 4.60 5.30 6.20

74 148 XL 4.60 5.30 6.20

75 150 XL 4.60 5.30 6.20

77 154 XL 4.80 5.40 6.20

78 156 XL 4.80 5.40 6.20

80 160 XL 4.80 5.40 6.40

81 162 XL 4.90 5.50 6.70

83 166 XL 4.90 5.50 6.70

84 168 XL 4.90 5.50 6.70

85 170 XL 4.90 5.50 6.70

87 174 XL 4.90 5.70 6.90

88 176 XL 4.90 5.70 6.90

89 178 XL 4.90 5.70 6.90

90 180 XL 4.90 5.70 6.90

91 182 XL 5.00 5.70 6.90

92 184 XL 5.10 5.80 6.90

95 190 XL 5.10 5.80 6.90

98 196 XL 5.20 6.10 7.10

No. of notches

Type and pitchlength in tenths

of an inch

025 in6.35 mm

€/pc.

031 in7.9 mm

€/pc.

037 in9.4 mm

€/pc.

99 198 XL 5.20 6.10 7.10

100 200 XL 5.20 6.10 7.10

101 202 XL 5.20 6.20 7.10

105 210 XL 5.20 6.20 7.20

107 214 XL 5.30 6.20 7.30

110 220 XL 5.30 6.20 7.30

114 228 XL 5.40 6.60 7.40

115 230 XL 5.40 6.70 7.40

117 234 XL 5.50 6.70 7.40

120 240 XL 5.50 6.70 7.60

124 248 XL 5.70 6.90 7.60

125 250 XL 5.70 6.90 7.60

130 260 XL 5.70 6.90 8.00

135 270 XL 5.80 7.10 8.20

136 •272 XL 6.20 7.30 8.50

137 274 XL 6.20 7.30 8.50

140 280 XL 6.20 7.30 8.50

143 286 XL 6.20 7.30 8.50

145 290 XL 6.20 7.30 8.50

150 300 XL 6.60 7.50 8.70

153 •306 XL 6.60 7.50 8.70

155 310 XL 6.60 7.50 8.70

160 320 XL 6.70 7.60 9.00

161 322 XL 6.70 7.60 9.00

165 330 XL 6.70 7.60 9.00

170 340 XL 6.90 8.20 9.30

172 344 XL 6.90 8.20 9.30

175 350 XL 7.00 8.20 9.40

176 352 XL 7.00 8.20 9.40

190 380 XL 7.30 8.60 9.90

191 •382 XL 7.30 8.60 9.90

192 384 XL 7.30 8.60 9.90

194 •388 XL 7.30 8.70 9.90

195 390 XL 7.30 8.70 9.90

196 392 XL 7.30 8.70 9.90

206 412 XL 7.80 9.30 10.50

207 414 XL 7.80 9.30 10.50

217 434 XL 7.80 9.30 10.50

225 450 XL 8.50 9.70 11.10

230 460 XL 8.60 9.80 11.20

240 480 XL 8.70 10.00 11.40

249 498 XL 8.70 9.90 11.40

253 •506 XL 8.70 10.40 11.60

257 514 XL 9.00 10.50 11.80



47

XL pitch 1/5” (mm 5.080) L pitch 3/8” (mm 9.525)No. of


of an inch

025 in6.35 mm

€/pc.

031 in7.9 mm

€/pc.

037 in9.4 mm

€/pc.

280 560 XL 9.80 11.30 12.80

290 580 XL 9.80 11.40 13.00

315 630 XL 10.50 11.80 13.80

343 686 XL 12.10 13.60 16.10

430 860 XL 14.50 16.20 19.30

610 1220 XL 20.50 22.90 27.40

No. of notches


of an inch

050 in12.7 mm

€/pc.

075 in19.05 mm

€/pc.

100 in25.4 mm

€/pc.

33 124 L 9.60 13.60 17.80

36 135 L 9.90 14.20 18.40

40 150 L 10.40 15.00 19.10

43 160 L 11.20 15.40 19.70

46 173 L 11.40 16.00 20.80

48 180 L 11.40 16.00 21.10

50 187 L 11.40 16.50 21.40

52 195 L 11.50 17.40 22.00

54 202 L 11.80 17.40 22.50

56 210 L 12.40 17.70 22.90

57 214 L 12.40 17.80 23.50

60 225 L 12.80 18.40 23.70

63 236 L 13.20 18.60 24.40

64 240 L 13.30 18.80 24.80

68 255 L 13.60 19.60 25.50

72 270 L 14.40 20.40 26.50

76 285 L 14.80 21.10 27.20

80 300 L 15.20 21.60 28.20

86 322 L 15.90 22.70 29.30

88 330 L 16.10 23.20 30.10

92 345 L 16.50 23.70 30.90

98 367 L 17.40 24.80 32.20

104 390 L 18.20 25.80 33.50

108 405 L 18.60 26.50 34.30

110 412 L 18.80 26.70 34.80

112 420 L 18.90 27.00 35.30

120 450 L 20.00 28.70 37.10

121 454 L 20.60 29.10 38.10

128 480 L 21.00 30.00 38.90

136 510 L 21.80 31.40 40.80

144 540 L 22.90 32.80 42.60

160 600 L 24.80 35.40 46.10

176 660 L 25.10 37.60 50.10

194 728 L 28.90 41.10 53.80

218 817 L 31.60 45.20 59.10

232 870 L 32.40 45.40 60.20

240 900 L 33.60 48.20 61.80

261 980 L 36.60 52.80 67.30

274 1028 L 38.40 55.50 70.50

375 1406 L 52.40 75.90 96.60



48


H pitch 1/2” (mm 12.7)

No. of notches


of an inch

200 in50.8 mm

€/pc.

300 in76.2 mm

€/pc.

400 in101.6 mm

€/pc.

58 507 XH 189.10 270.80 353.50

61 •534 XH 194.80 279.40 364.90

64 560 XH 200.50 287.90 375.10

72 630 XH 216.10 309.50 404.40

80 700 XH 231.50 331.70 432.70

88 770 XH 246.90 353.50 461.60

96 840 XH 261.80 375.80 489.90

112 980 XH 292.40 421.00 547.00

128 1120 XH 322.80 463.00 604.80

144 1260 XH 353.80 507.40 662.50

160 1400 XH 384.50 552.30 719.40

176 1540 XH 415.70 597.00 776.50

200 1750 XH 461.60 662.50 862.90

No. of notches


of an inch

075 in19.05 mm

€/pc.

100 in25.4 mm

€/pc.

150 in38.10 mm

€/pc.

200 in50.8 mm

€/pc.

300 in76.2 mm

€/pc.

46 230 H 23.00 30.10 44.00 57.70 83.10

48 240 H 23.10 30.20 44.10 57.90 85.70

51 255 H 23.70 30.90 45.10 59.60 89.10

54 270 H 24.90 32.20 47.10 62.30 91.80

56 280 H 25.50 34.00 49.80 65.70 98.60

60 300 H 26.60 34.30 50.30 66.40 98.70

66 330 H 28.20 36.70 53.60 70.50 104.50

67 335 H 29.00 37.90 54.90 72.30 106.60

69 345 H 29.30 38.60 55.30 72.90 109.78

70 350 H 29.70 38.70 56.00 73.40 111.20

72 360 H 30.00 38.80 56.90 74.80 111.80

74 370 H 30.70 39.60 58.30 76.80 112.60

78 390 H 31.50 40.90 60.00 78.90 116.70

80 400 H 32.20 42.90 62.30 82.80 119.00

84 420 H 33.30 43.30 63.00 83.30 123.10

86 430 H 34.70 45.10 65.30 85.90 126.10

90 450 H 35.00 45.30 66.50 87.20 129.40

93 465 H 36.00 47.10 68.30 88.10 133.70

96 480 H 36.60 47.60 69.60 91.50 135.80

102 510 H 38.30 49.90 72.80 95.80 142.20

108 540 H 40.10 52.10 76.20 99.90 148.10

112 560 H 40.80 54.10 78.70 103.20 153.60

114 570 H 41.50 54.20 79.40 104.40 154.40

120 600 H 43.30 56.50 82.70 108.70 160.70

126 630 H 45.10 58.80 85.70 112.70 166.70

130 650 H 45.90 60.70 86.30 114.40 183.60

132 660 H 46.80 60.90 88.80 116.70 173.50

136 680 H 47.30 63.10 91.70 121.20 178.80

140 700 H 49.10 63.90 93.00 122.30 181.70

145 725 H 50.30 65.60 95.80 126.20 186.40

146 730 H 50.80 66.60 97.00 127.60 188.80

150 750 H 52.00 67.40 98.50 129.60 191.60

154 770 H 53.10 70.80 103.10 133.60 196.70

160 800 H 54.60 71.10 104.20 136.30 202.00

170 850 H 57.20 74.70 109.10 143.60 212.60

172 860 H 58.10 77.50 113.10 148.60 215.10

180 900 H 60.20 78.20 114.50 150.80 223.30

190 950 H 63.80 79.10 119.80 156.30 233.40

200 1000 H 65.90 80.10 125.20 164.50 243.70

220 1100 H 71.60 92.80 135.90 179.30 265.40

224 1120 H 72.60 94.40 138.10 181.70 268.80

226 1130 H 73.10 95.70 139.30 183.20 271.20

228 1140 H 73.50 95.80 140.40 184.30 273.90

230 1150 H 74.50 96.70 141.20 185.70 275.30

234 1170 H 76.60 98.10 145.20 193.90 281.50

240 1200 H 78.70 100.60 148.80 196.70 287.80

250 1250 H 80.10 104.20 152.40 199.90 296.60

254 1270 H 82.60 106.00 155.00 203.60 301.30

XXH pitch 1”1/4 (mm 31.75)No. of


of an inch

200 in50.8 mm

€/pc.

300 in76.2 mm

€/pc.

400 in101.6 mm

€/pc.

500 in127 mm

€/pc.

56 700 XXH 423.80 608.30 793.20 978.30

64 800 XXH 464.00 666.30 868.90 1069.10

72 900 XXH 504.20 722.90 943.00 1162.90

80 1000 XXH 544.00 781.60 1018.00 1255.30

96 1200 XXH 624.40 897.60 1168.30 1440.60

112 1400 XXH 704.50 1012.50 1318.70 1625.90

128 1600 XXH 785.40 1126.40 1468.20 1811.00

144 1800 XXH 866.00 1241.00 1619.30 1996.20


XH pitch 7/8” (mm 22.225)

No. of notches


of an inch

075 in19.05 mm

€/pc.

100 in25.4 mm

€/pc.

150 in38.10 mm

€/pc.

200 in50.8 mm

€/pc.

300 in76.2 mm

€/pc.

265 1325 H 85.70 108.70 166.50 219.50 314.40

280 1400 H 88.30 114.80 167.90 221.20 328.00

300 1500 H 94.30 120.60 181.30 233.10 338.70

320 1600 H 100.40 126.70 187.20 245.90 357.90

340 1700 H 105.00 136.90 200.20 262.60 389.70

353 1765 H 107.10 141.80 215.10 265.60 404.60

371 1855 H 113.20 149.00 226.40 275.80 425.20

372 1860 H 113.70 151.60 227.40 290.70 426.30

384 1920 H 118.20 157.60 231.70 305.90 440.10

402 2010 H 126.60 161.50 232.50 307.50 448.70

420 2100 H 127.40 163.80 233.60 308.90 451.00

440 2200 H 128.00 165.90 234.90 311.20 454.30

472 2360 H 141.30 168.60 236.80 312.60 456.40

500 2500 H 147.00 195.30 268.00 357.80 525.80

536 2680 H 171.10 218.90 310.30 416.60 606.40

544 2720 H 171.90 225.40 318.60 420.20 613.40

49

MXL pitch 2/25”(mm 2.032)

Teeth no.Type and

pitch lengthof an inch

€/inch

54 432 MXL 14.80

55 440 MXL 15.20

56 448 MXL 15.30

58 464 MXL 15.30

60 480 MXL 15.60

67 536 MXL 15.60

68 544 MXL 15.60

70 560 MXL 15.60

71 568 MXL 15.60

72 576 MXL 15.60

75 600 MXL 15.60

77 616 MXL 16.50

80 640 MXL 16.50

82 656 MXL 16.50

84 672 MXL 16.60

85 680 MXL 16.60

87 696 MXL 16.60

88 704 MXL 16.60

90 720 MXL 16.70

92 736 MXL 17.20

94 752 MXL 17.20

95 760 MXL 17.20

97 776 MXL 17.20

100 800 MXL 17.20

101 808 MXL 17.30

103 824 MXL 17.30

105 840 MXL 17.40

106 848 MXL 17.40

110 880 MXL 17.40

112 896 MXL 17.70

113 904 MXL 17.70

114 912 MXL 17.70

118 944 MXL 18.00

120 960 MXL 18.00

122 976 MXL 18.00

123 984 MXL 18.20

125 1000 MXL 18.20

126 1008 MXL 18.20

132 1056 MXL 18.30

140 1120 MXL 18.50

150 1200 MXL 19.60

160 1280 MXL 20.40

164 •1312 MXL 20.40

165 1320 MXL 20.40

170 1360 MXL 20.40

Teeth no.Type and


€/inch

175 1400 MXL 20.50

180 1440 MXL 20.50

184 1472 MXL 22.70

225 1800 MXL 22.70

236 1888 MXL 22.70

•251 2008 MXL 24.20

298 2384 MXL 24.20

•365 2920 MXL 30.10

400 3200 MXL 30.80

•412 3296 MXL 30.80

•434 3472 MXL 30.80

463 3704 MXL 32.40

504 4030 MXL 34.90

546 4370 MXL 37.90

600 4800 MXL 41.60

656 5250 MXL 45.40

1030 8240 MXL 71.20

1463 11700 MXL 101.50

1516 12130 MXL 105.00

XL pitch 1/5”(mm 5.08)

Teeth no.Type and


€/inch

27 •54 XL 12.40

30 60 XL 12.80

33 •66 XL 13.00

35 70 XL 13.20

40 80 XL 13.50

43 86 XL 13.70

45 90 XL 13.80


Teeth no.Type and


€/inch

46 92 XL 14.40

47 94 XL 14.40

48 96 XL 14.40

49 98 XL 14.40

50 100 XL 14.40

51 102 XL 14.60

53 106 XL 14.80

54 108 XL 14.80

55 110 XL 15.40

56 112 XL 15.60

57 114 XL 15.60

58 116 XL 15.60

59 118 XL 15.60

60 120 XL 15.60

62 124 XL 15.80

63 126 XL 15.80

65 130 XL 15.80

67 134 XL 16.20

68 136 XL 16.20

69 138 XL 16.20

70 140 XL 16.20

72 144 XL 16.40

74 148 XL 16.50

75 150 XL 16.50

77 154 XL 16.70

78 156 XL 16.70

80 160 XL 16.80

81 162 XL 17.50

83 166 XL 17.50

84 168 XL 17.50

85 170 XL 17.50

87 174 XL 17.70

88 176 XL 17.70

89 178 XL 17.70

90 180 XL 17.70

91 182 XL 18.00

92 184 XL 18.30

95 190 XL 18.30

98 196 XL 18.60

99 198 XL 18.60

100 200 XL 18.60

101 202 XL 18.80

105 210 XL 18.90

M.E.C. TIMING BELT – SLEEVES


50


Teeth no.Type and pitchlength in tenths

of an inch€/inch

107 214 XL 19.60

110 220 XL 19.60

114 228 XL 19.80

115 230 XL 19.80

117 234 XL 20.00

120 240 XL 20.50

124 248 XL 20.80

125 250 XL 20.80

130 260 XL 21.10

135 270 XL 21.60

136 •272 XL 22.50

137 274 XL 22.50

140 280 XL 22.50

143 286 XL 22.50

145 290 XL 22.50

150 300 XL 23.20

153 306 XL 23.30

155 310 XL 23.40

160 320 XL 23.90

161 322 XL 23.90

165 330 XL 24.10

170 340 XL 24.60

172 344 XL 24.60

175 350 XL 24.90

176 352 XL 24.90

190 380 XL 26.30

191 •382 XL 26.30

192 384 XL 26.50

194 •388 XL 26.70

195 390 XL 26.70

196 392 XL 26.70

206 412 XL 28.10

207 414 XL 28.50

217 434 XL 29.20

225 450 XL 30.40

230 460 XL 30.90

240 480 XL 31.20

249 498 XL 31.30

253 •506 XL 31.50

257 514 XL 31.70

L pitch 3/8”(mm 9.525)


of an inch€/inch

280 560 XL 35.70

290 580 XL 35.80

315 630 XL 38.40

343 686 XL 41.50

430 860 XL 52.20

610 1220 XL 73.80


of an inch€/inch

33 124 L 16.30

36 135 L 16.70

40 150 L 18.40

43 160 L 19.10

46 173 L 19.30

48 180 L 19.60

50 187 L 19.60

52 195 L 19.80

54 202 L 20.70

56 210 L 21.00

57 214 L 21.20

60 225 L 21.70

63 236 L 22.40

64 240 L 22.50

68 255 L 23.20

72 270 L 24.20

76 285 L 24.90

80 300 L 25.80

86 322 L 26.90

88 330 L 27.60

92 345 L 28.10

98 367 L 29.30

104 390 L 30.70

108 405 L 31.40

110 412 L 31.80

112 420 L 32.20

120 450 L 33.70

121 454 L 35.40

128 480 L 35.50

136 510 L 37.10

144 540 L 38.60

160 600 L 39.10

176 660 L 47.10

194 728 L 49.30

218 817 L 56.20

232 870 L 57.90

240 900 L 59.90

261 980 L 65.20

274 1028 L 68.40

375 1406 L 93.70



51

H pitch 1/2”(mm 12.7)


of an inch€/inch

46 230 H 27.10

48 240 H 27.50

51 255 H 29.10

54 270 H 29.30

56 280 H 30.10

60 300 H 31.40

66 330 H 33.50

67 335 H 34.00

69 345 H 34.50

70 350 H 35.00

72 360 H 35.40

74 370 H 37.00

78 390 H 37.30

80 400 H 38.10

84 420 H 39.50

86 430 H 40.10

90 450 H 41.20

93 465 H 41.90

96 480 H 43.50

102 510 H 45.60

108 540 H 47.40

112 560 H 49.10

114 570 H 49.30

120 600 H 51.50

126 630 H 53.50

130 650 H 54.50

132 660 H 55.20

136 680 H 56.90

140 700 H 58.00

145 725 H 59.80

146 730 H 60.60

150 750 H 61.40

154 770 H 63.20

160 800 H 64.20

170 850 H 67.80

172 860 H 69.50

180 900 H 71.10

190 950 H 74.50

200 1000 H 78.00

220 1100 H 84.20

224 1120 H 85.30

226 1130 H 85.40

XXH pitch 1”1/4(mm 31.75)


of an inch€/inch

228 1140 H 85.60

230 1150 H 87.70

234 1170 H 88.80

240 1200 H 90.10

250 1250 H 94.70

254 1270 H 102.20

265 1325 H 103.50

280 1400 H 104.70

300 1500 H 106.70

320 1600 H 112.50

340 1700 H 118.70

353 1765 H 120.20

371 1855 H 123.20

372 1860 H 129.20

384 1920 H 137.30

402 2010 H 146.50

420 2100 H 147.70

440 2200 H 148.50

472 2360 H 148.80

500 2500 H 170.40

536 2680 H 190.80

544 2720 H 193.00

XH pitch 7/8”(mm 22.225)


of an inch€/inch

58 507 XH 86.20

61 •534 XH 88.70

64 560 XH 91.30

72 630 XH 98.40

80 700 XH 105.40

88 770 XH 112.50

96 840 XH 119.50

112 980 XH 133.30

128 1120 XH 147.50

144 1260 XH 161.20

160 1400 XH 175.60

176 1540 XH 189.40

200 1750 XH 210.30


of an inch€/inch

56 700 XXH 193.10

64 800 XXH 211.50

72 900 XXH 229.40

80 1000 XXH 247.90

96 1200 XXH 284.40

112 1400 XXH 320.80

128 1600 XXH 358.20

144 1800 XXH 394.80


52

The M.E.C. TIMING BELT DD synchronous belts are made double-sided for the simultaneous meshing of notched pulleys along the outside and inside of the belts. This means that just one belt is needed to transmit

movement to a series of pulleys, as well as making it possible to invert movement between the outside and inside pulleys without altering the gear ratio.

Classification of the M.E.C. TIMING BELT DD

The M.E.C. TIMING BELT DD double-sided belts , identified by commercial names next to them, are available in the following pitch diameters and standard widths:

Commercialname

mm inches mm inches (hundredths)

XL 5.080 0.200 (1/5) 6.35-7.90-9.40 0.25-0.31-0.37

L 9.525 0.375 (3/8) 12.70-19.05-25.40 0.50-0.75-100

H 12.700 0.500 (1/2) 19.05-25.40-38.10-50.80-76.20 0.75-100-150-200-300

Standard WidthsPitch

Identification of the M.E.C. TIMING BELT DD

The M.E.C. TIMING BELT DD double-sided belts are identified by the same name as the single sided M.E.C. TIMING BELT followed by the letters DD.Performance is identical to that of the single sided M.E.C. TIMING BELT belts.

Example:A belt with a pitch development of 60 inches (1524 mm), pitch 1/2 inch (12.7 mm) and width 3/4 inch (19.05 mm), is written as follows:

600 H 075 DDPlease consult the Calculus Booklet for Technical Features

M.E.C. TIMING BELT DD double-sided belts

53

XL pitch 1/5” (mm 5.08) H pitch 1/2” (mm 12.7)

Type and pitch length

in tenths of an inch

075 in19.05 mm

€/each

100 in25.4 mm€/each




240 H 92.60 120.00 175.90 231.50 341.40

270 H 99.20 129.00 188.80 247.60 366.90

300 H 105.90 137.80 209.70 265.40 391.20

330 H 112.60 146.20 214.20 281.80 416.90

360 H 119.50 155.20 226.60 298.10 441.60

390 H 126.20 164.00 240.40 315.20 467.50

420 H 132.90 173.00 252.20 331.70 492.30

450 H 139.80 181.70 265.40 349.40 509.20

480 H 146.20 190.30 278.40 366.90 542.50

510 H 153.00 199.60 291.40 383.40 567.30

540 H 159.80 207.70 304.10 400.40 592.20

570 H 166.40 216.40 316.20 416.90 617.40

600 H 173.50 223.30 330.00 433.60 643.10

630 H 180.10 234.20 342.20 450.40 666.20

660 H 186.40 242.50 355.90 467.50 691.70

700 H 195.70 254.60 372.60 489.90 725.20

725 H 200.90 261.20 385.90 507.40 751.10

750 H 206.80 268.80 394.90 517.50 767.50

800 H 218.40 284.60 415.40 546.00 808.90

850 H 229.70 298.10 435.90 574.80 851.20

900 H 240.90 313.10 457.70 597.90 893.30

1000 H 262.60 342.20 500.10 659.70 976.70

1100 H 285.60 372.00 543.60 715.70 1059.20

1140 H 304.70 401.80 563.40 741.80 1097.80

1150 H 307.20 407.50 568.30 748.30 1107.40

1250 H 319.80 416.20 608.10 799.40 1184.20

1400 H 353.50 458.70 671.60 884.30 1308.90

1500 H 382.10 489.20 719.60 947.50 1402.40

1600 H 409.70 523.90 767.60 1010.70 1495.90

1700 H 421.00 547.00 801.00 1052.80 1559.50

1855 H 459.40 596.90 874.10 1148.80 1701.70

2010 H 497.80 646.80 947.10 1244.80 1843.90





•120 XL

•130 XL

•140 XL

•150 XL

•160 XL

170 XL 23.90 32.40

180 XL 24.30 33.30

190 XL 25.10 34.10

200 XL 25.50 34.60

210 XL 26.20 35.00

220 XL 26.70 35.90

230 XL 27.20 37.00

240 XL 27.80 37.30

250 XL 28.60 37.50

260 XL 29.00 38.30

290 XL 30.80 40.80

310 XL 31.90 43.30

330 XL 33.20 44.90

392 XL 36.60 49.90

L pitch 3/8” (mm 9.525)




075 in19.05 mm

€/each


•124 L

•150 L

187 L 52.00 74.50 96.40

210 L 55.10 78.90 102.80

225 L 57.20 82.00 106.50

240 L 59.40 85.00 110.80

255 L 61.70 88.30 114.50

270 L 64.20 91.10 118.70

285 L 66.00 94.40 122.60

300 L 68.20 97.30 126.80

322 L 71.20 102.10 132.70

345 L 74.70 106.50 138.70

367 L 77.90 111.20 144.80

390 L 81.10 116.20 150.80

420 L 85.50 122.10 158.80

450 L 90.00 128.30 166.70

480 L 94.00 134.40 174.80

510 L 98.20 140.60 182.90

540 L 102.50 146.70 191.00

600 L 111.30 159.10 206.80

660 L 122.40 175.10 227.50

M.E.C. TIMING BELT DD double-sided belts

ON REQUEST

ON REQUEST

54


Teeth no.Type and pitch

length in tenths of an inch

€ /inch

60 •120 XL

65 •130 XL

70 •140 XL

75 •150 XL

80 •160 XL

85 170 XL 87.30

90 180 XL 88.60

95 190 XL 90.90

100 200 XL 93.20

105 210 XL 95.70

110 220 XL 98.10

115 230 XL 99.50

120 240 XL 102.00

125 250 XL 104.40

130 260 XL 105.90

145 290 XL 112.10

155 310 XL 117.00

165 330 XL 120.80

196 392 XL 133.50

L pitch 3/8”(mm 9.525)



€ /inch

33 •124 L

40 •150 L

50 187 L 88.60

56 210 L 93.90

60 225 L 98.10

64 240 L 101.10

68 255 L 105.00

72 270 L 108.30

76 285 L 112.10

80 300 L 116.20

86 322 L 120.80

92 345 L 127.10

98 367 L 132.00

104 390 L 137.60

112 420 L 145.50

120 450 L 152.50

128 480 L 159.40

136 510 L 166.70

144 540 L 174.50

160 600 L 188.80

176 660 L 207.70

H pitch 1/2”(mm 12.7)



€ /inch

48 240 H 109.80

54 270 H 117.70

60 300 H 125.60

66 330 H 133.50

72 360 H 142.40

78 390 H 150.20

84 420 H 158.00

90 450 H 166.00

96 480 H 173.90

102 510 H 181.70

108 540 H 189.70

114 570 H 197.60

120 600 H 203.70

126 630 H 213.30

132 660 H 221.20

140 700 H 232.10

145 725 H 240.40

150 750 H 245.50

160 800 H 259.80

170 850 H 272.50

180 900 H 285.90

200 1000 H 312.80

220 1100 H 338.70

228 1140 H 351.20

230 1150 H 355.10

250 1250 H 379.80

280 1400 H 419.30

300 1500 H 449.30

320 1600 H 479.50

340 1700 H 499.10

371 1855 H 544.70

402 2010 H 590.20

M.E.C. TIMING BELT DD DOUBLE-SIDED SLEEVES

ON

REQ

UEST

ON REQUEST

55

They are used where the execution of alternate movements is required also applying significant length to the belts. These belts have all the advantages of the endless TIMING

BELT such as no lubrication, no sliding, no noise, minimum initial pre-tension, no extensions

Available Widths€ pc per metre

MXL025 WIDTH 6.35

9.20

MXL


XL025 WIDTH 6.35 8.00

XL031 WIDTH 7.9 9.40

XL037 WIDTH 9.4 11.10

XL


L050 WIDTH 12.70 18.80

L075 WIDTH 19.05 27.00

L100 WIDTH 25.40 35.00

L


H050 WIDTH 12.70 21.20

H075 WIDTH 19.05 30.20

H100 WIDTH 25.40 39.60

H

M.E.C. TIMING BELT Open-ended synchronous belts

56

HTD stands for High Torque Drive.The synchronous HTD belts are characterised by a new profile (rounded notched) which makes it possible to transmit more power with the same pitch as traditional synchronous notched belts. Furthermore, other advantages include the reduction of noise and interference, increased resistance against the notch being skipped and shearing stress, precise angular transmission and constant speed up to 50 mt/sec., low tensioning, excellent reliability, compact dimensions and moderate maintenance.

STD MEANS SUITABLE FOR EXTREMELY HIGH TORQUE MOMENTSIn addition to the advantage above indicated for HTD belts the following advantages are added:A) longer life thanks to the new profile edge and to a higher quality of the material used for the belt manufacture.B) resistant to temperatures between -20° and 100°C, resistant to atmospheric agents and moderately resistant to oilC) almost silentD) reduced maintenance requirementsE) these belts permit the synchrony transmission, made in the past by means of chain, and therefore high power transmission with low revolution number.

Classification of the M.E.C. TIMING BELT HTD and STD belts

The M.E.C. TIMING BELT HTD and STD belts, identified by their commercial names, are available in the following pitch diameters and standard widths.

Commercialname

Pitchmm

Notch Thicknessmm

Tot. Thicknessmm

standard Widthsmm

3 M 3 1.2 2.4 6-9-15

5 M 5 2.1 3.6 9-15-25

8 M 8 3.4 5.6 20-30-50-85

8 MS 8 3 5.3 20-30-50-85

14 M 14 6.1 10 40-55-85-115-170

Identification of the M.E.C. TIMING BELT HTD and STD belts

The M.E.C. TIMING BELT HTD and STD belts are identified by their pitch length in mm , pitch diameter in mm, and width in mm.

Example:A belt with a pitch length of 960 mm, pitch diameter of 8 mm and a width of 50 mm is described as follows:

960 8M 50

M.E.C. SYNCHRONOUS TIMING BELT HTD for industrial transmissions

57

Table A - Tolerance on the width of M.E.C. TIMING BELT 3-5-8-14 M HTD and 8M SUPER STD belts.

Tables A, B, C show the respective width, development and thickness tolerance of the M.E.C TIMING BELT HTD and STD belts.

Belt Width Tolerance on width (mm)

Over up to up to 800 mmpitch length

up to 800 mm over1760 mm pitch length

over 1760 mmpitch length

- 9 + 0.4- 0.8

+ 0.4- 0.8

--

9 40 ± 0.8 +0.8- 1.2

+0.8- 1.2

40 50 +0.8- 1.2

± 1.2 +1.2- 1.5

50 85 +1.2 ± 1.5 +1.5- 2.0

85 170 ± 1.5 +1.5- 2

± 2- 1.2

>170 85 ± 4.8 ± 4.8

Tolerance of width of 20M type belts is 8 mm for any width or development.

Table B - Tolerance on development of M.E.C. TIMING BELT HTD and STD belts

Over up toTolerance

mm

- 250 ± 0.40

250 380 ± 0.45

380 500 ± 0.50

500 750 ± 0.60

750 950 ± 0.65

950 1250 ± 0.75

1250 1500 ± 0.80

1500 1750 ± 0.85

1750 2000 ± 0.90

2000 2250 ± 0.95

2250 2500 ± 1.00

Belt length in mm

Over up toTolerance

mm

2500 2750 ± 1.05

2750 3000 ± 1.10

3000 3250 ± 1.15

3250 3500 ± 1.20

3500 3750 ± 1.25

3750 4000 ± 1.30

4000 4250 ± 1.35

4250 4500 ± 1.40

4500 5000 ± 1.50

5000 - ± 1.60

Belt length in mm


TypeThickness measured

on notch mmDegree of tolerance

mm

3 M 2.4 ± 0.2

5 M 3.6 ± 0.25

8 M 5.6 ± 0.4

8 MS 5.3 ± 0.4

14 M 10.0 ± 0.6

20 M 13.2 ± 0.8

Sectiont

mmhs

mmht

mm

3 M 3 2.4 1.25 M 5 3.6 2.18 M 8 5.6 3.4

8 MS 8 5.3 314 M 14 10.0 6.120 M 20 13.2 9.0

All M.E.C. TIMING BELT HTD STD belts have a rectified outside surface and a special fibreglass insert ensuring fluid movement.


TOLERANCE OF THE M.E.C. TIMING BELT HTD and STD BELTS

58

Example of notch profile of STD pulley

For transmissions to be built ex-novo, it is recommended that the drawing above is followed. If the use of STD belts is preferable to that of HTD belts hich are already being

used to increase the transmission performance, the existing HTD pulleys can be used following verification by our technical department.

Belt profile of STD 8 mm Base width: 5.160 mm Scale 1:10

With pitch: 8 mm Base width: 5.350 mm Pitch diameter: 63.662 mm Scale 1:10


M.E.C. TIMING BELT STD BELTS

59

Pitch 3M

Teeth no.Type and pitchdevelopment

in mm

6 mm€/each

9 mm€/each

15 mm€/each

48 144-3 M 6.40 8.60 13.40

50 150-3 M 6.40 8.70 13.40

53 159-3 M 6.40 8.70 13.50

55 165-3 M 6.50 8.70 13.50

56 168-3 M 6.60 8.70 13.50

58 174-3 M 6.90 8.80 13.70

59 177-3 M 7.00 8.80 13.70

67 201-3 M 7.00 8.80 14.20

68 204-3 M 7.00 9.00 14.40

70 210-3 M 7.10 9.20 14.50

71 213-3 M 7.10 9.20 14.50

72 216-3 M 7.10 9.20 14.60

75 225-3 M 7.10 9.20 14.60

80 240-3 M 7.10 9.20 14.70

82 246-3 M 7.10 9.20 14.80

84 252-3 M 7.10 9.40 14.80

85 255-3 M 7.10 9.60 15.00

89 267-3 M 7.10 9.60 15.00

95 285-3 M 7.20 9.60 15.10

100 300-3 M 7.20 9.70 15.30

104 •312-3 M 7.20 9.80 15.70

106 318-3 M 7.20 9.80 15.70

112 336-3 M 7.30 9.80 15.80

113 339-3 M 7.30 9.90 15.90

121 363-3 M 7.40 10.10 15.90

128 384-3 M 7.40 10.10 16.10

130 390-3 M 7.50 10.40 16.20

140 420-3 M 7.50 10.40 16.50

149 447-3 M 8.20 10.60 17.20

158 474-3 M 8.20 11.00 17.50

160 480-3 M 8.20 11.00 17.70

162 486-3 M 8.50 11.10 17.70

165 495-3 M 8.50 11.20 17.80

167 501-3 M 8.50 11.20 17.80

171 513-3 M 8.50 11.30 18.00

174 522-3 M 8.60 11.30 18.30

175 525-3 M 8.60 11.40 18.30

177 •531-3 M 8.60 11.40 18.30

179 537-3 M 8.70 11.60 18.50

188 564-3 M 8.70 11.60 18.50

190 570-3 M 8.70 11.80 18.60

202 606-3 M 9.40 12.30 19.10

211 633-3 M 9.60 12.70 20.40

223 669-3 M 9.70 12.90 20.70

236 708-3 M 9.80 13.00 20.80

Belt Width


in mm

6 mm€/each

9 mm€/each

15 mm€/each

237 711-3 M 9.80 13.30 20.80

257 753-3 M 10.40 13.50 22.20

281 843-3 M 10.80 14.50 22.70

294 •882-3 M 11.10 14.80 23.10

315 945-3 M 11.60 15.20 23.40

354 •1062-3 M 12.10 16.10 25.40

375 1125-3 M 12.30 16.20 26.20

392 1176-3 M 12.60 16.40 26.20

421 •1263-3 M 13.40 16.50 26.30

467 1401-3 M 13.60 19.30 33.00

523 1569-3 M 16.50 23.10 38.20

600 1800-3 M 19.00 26.40 43.40

650 1950-3 M 20.50 28.50 46.90

880 2640-3 M 28.10 38.90 64.30

1130 3390-3 M 36.10 49.30 81.50

2268 6804-3 M 68.50 94.80 154.80

Belt Width

M.E.C. TIMING BELT HTD BELTS


60

Pitch 5M Pitch 8M


in mm

9 mm€/each

15 mm€/each

25 mm€/each

45 225-5 M 10.30 16.10 24.40

60 300-5 M 10.50 16.30 24.80

66 330-5 M 10.80 17.40 25.80

70 350-5 M 11.20 17.50 26.30

75 375-5 M 11.30 18.00 26.80

80 400-5 M 11.80 18.50 27.70

85 425-5 M 11.90 18.80 28.60

90 450-5 M 12.30 19.10 29.10

95 475-5 M 12.70 19.70 29.50

100 500-5 M 12.80 20.50 30.70

105 525-5 M 13.00 20.70 31.00

107 535-5 M 13.40 21.00 31.50

113 565-5 M 13.50 21.40 32.70

120 600-5 M 14.40 22.20 33.40

123 615-5 M 14.40 22.40 33.60

124 620-5 M 14.50 22.70 34.00

126 630-5 M 14.50 23.90 34.10

127 635-5 M 14.50 23.90 34.20

133 665-5 M 15.30 24.00 36.30

139 695-5 M 15.30 24.00 36.30

140 700-5 M 15.30 24.00 36.60

142 710-5 M 15.30 24.10 36.70

144 720-5 M 15.50 24.70 37.10

148 •740-5 M 15.70 24.80 37.50

151 755-5 M 16.30 25.30 38.80

160 800-5 M 16.30 26.00 39.10

170 850-5 M 17.10 26.90 40.80

178 890-5 M 17.50 27.70 41.40

185 925-5 M 18.30 28.70 43.30

190 •950-5 M 18.30 29.60 43.50

200 1000-5 M 18.90 30.00 45.10

210 1050-5 M 19.40 31.00 46.60

225 1125-5 M 20.60 31.90 49.30

235 1175-5 M 21.70 33.20 51.20

254 1270-5 M 22.30 35.40 52.60

284 •1420-5 M 24.20 38.10 56.90

300 1500-5 M 25.40 40.90 62.00

319 •1595-5 M 26.00 41.10 62.10

358 •1790-5 M 28.60 44.90 68.30

360 •1800-5 M 28.90 45.80 68.80

379 •1895-5 M 29.60 47.00 72.10

400 •2000-5 M 30.90 49.20 73.50

420 2100-5 M 32.40 51.40 79.70

450 2250-5 M 34.70 54.90 84.90

474 2370-5 M 36.40 57.90 89.00

505 •2525-5 M 38.80 61.40 93.80

605 3025-5 M 42.70 68.10 105.20

668 3340-5 M 47.00 75.60 117.00

686 3430-5 M 48.40 77.50 119.90

754 3770-5 M 52.80 85.00 131.70

852 4260-5 M 59.80 96.40 149.10

1400 7000-5 M 93.10 158.60 245.60

Belt Width


in mm

20 mm€/each

30 mm€/each

50 mm€/each

85 mm€/each

47 376-8 M 19.80 29.00 46.60 78.80

53 424-8 M 19.90 29.10 46.90 80.40

60 480-8 M 20.70 29.50 47.10 81.10

65 520-8 M 21.30 31.30 49.00 90.50

70 560-8 M 22.80 33.30 52.10 91.20

75 600-8 M 22.80 33.50 52.60 93.80

78 624-8 M 27.20 40.90 64.00 98.10

80 640-8 M 27.90 41.30 64.50 99.70

82 656-8 M 28.60 42.10 65.10 105.80

90 720-8 M 30.80 44.70 70.10 107.30

98 784-8 M 31.60 45.30 70.70 114.10

100 800-8 M 31.90 45.90 71.60 115.00

106 848-8 M 33.10 47.80 74.80 121.60

110 880-8 M 33.70 49.30 76.90 121.80

114 912-8 M 34.10 49.50 77.60 124.90

115 920-8 M 34.20 49.60 78.10 126.20

118 944-8 M 34.40 49.70 79.10 128.10

120 960-8 M 34.70 49.90 79.40 130.20

130 1040-8 M 37.10 51.60 84.20 140.10

140 1120-8 M 39.80 57.60 90.50 147.10

144 1152-8 M 40.10 58.20 90.80 154.30

150 1200-8 M 40.20 58.30 91.10 155.70

160 1280-8 M 42.60 62.20 96.70 163.10

163 1304-8 M 43.00 62.70 97.40 175.90

166 1328-8 M 45.20 65.60 102.30 176.60

169 1352-8 M 45.30 66.20 102.50 176.70

170 1360-8 M 45.40 66.40 102.90 176.80

174 1392-8 M 45.60 66.50 103.10 177.20

180 1440-8 M 45.70 66.80 104.80 177.40

197 1576-8 M 46.30 71.20 111.30 186.70

200 1600-8 M 50.80 74.90 117.10 192.70

220 1760-8 M 56.80 83.20 127.70 208.70

225 1800-8 M 57.20 83.60 130.20 213.00

250 2000-8 M 62.20 91.00 142.20 234.00

281 2248-8 M 62.90 91.60 144.60 272.90

299 2392-8 M 67.10 96.60 157.30 273.40

300 2400-8 M 71.20 104.30 162.70 274.60

313 2504-8 M 73.10 105.70 167.00 282.30

325 2600-8 M 75.60 109.30 173.80 292.40

342 2736-8 M 79.50 115.90 181.70 311.20

350 2800-8 M 80.30 116.60 182.60 312.70

390 3120-8 M 88.20 127.50 202.20 341.10

400 3200-8 M 90.80 131.20 208.50 351.00

410 3280-8 M 93.07 134.50 213.80 359.80

450 3600-8 M 100.80 144.20 231.70 390.00

500 4000-8 M 113.40 164.00 260.60 438.70

550 4400-8 M 126.20 182.20 289.60 487.40

700 5600-8 M 158.80 229.60 364.80 614.10

825 6600-8 M 186.50 269.80 428.70 948.60

Belt Width



61

Pitch 14M Pitch 20M


in mm

40 mm€/each

55 mm€/each

85 mm€/each

115 mm€/each

170 mm€/each

69 966-14 M 148.10 206.80 339.20 441.00 653.20

85 1190-14 M 163.70 223.90 351.40 473.00 700.30

100 1400-14 M 174.10 245.20 383.80 515.20 765.40

110 1540-14 M 185.70 259.30 410.50 555.70 812.80

115 1610-14 M 190.30 266.10 415.00 557.30 822.60

127 1778-14 M 206.00 288.30 441.00 600.90 887.10

135 1890-14 M 211.30 298.40 456.40 621.90 891.30

150 2100-14 M 227.30 319.50 494.30 663.90 982.50

165 2310-14 M 242.50 340.80 516.50 707.20 1046.20

175 2450-14 M 252.50 351.40 549.10 741.00 1094.30

185 2590-14 M 258.50 361.70 563.90 771.10 1125.10

190 2660-14 M 285.20 385.10 618.90 809.70 1170.20

200 2800-14 M 287.60 388.50 621.90 812.90 1199.70

225 3150-14 M 294.90 421.00 638.00 866.10 1279.70

250 3500-14 M 322.20 452.20 701.20 946.30 1395.90

275 3850-14 M 353.10 489.90 760.20 1029.90 1512.30

309 4326-14 M 390.50 546.70 835.30 1135.90 1601.30

327 4578-14 M 405.50 568.40 876.80 1184.20 1672.10

340 4760-14 M 413.20 579.00 888.10 1198.20 1772.30

380 5320-14 M 461.80 634.90 981.20 1340.00 1980.90

410 5740-14 M 495.70 681.60 1063.40 1438.60 2126.80

440 6160-14 M 534.70 735.20 1136.10 1537.10 2272.30

490 6860-14 M 595.50 818.80 1265.20 1711.20 2530.30

Belt Width


in mm

115 mm€/each

170 mm€/each

230 mm€/each

290 mm€/each

340 mm€/each

100 2000 -20 M

125 2500 -20 M

170 3400 -20 M

190 3800 -20 M

210 4200 -20 M

230 4600 -20 M

250 5000 -20 M

260 5200 -20 M

270 5400 -20 M

280 5600 -20 M

300 6000 -20 M

Belt Width

All measurements in black are produced upon request, with the quantity supplied to be agreed upon in advance.


ON REQUEST

62

Pitch 8MS



in mm

20 mm€/each

30 mm€/each

50 mm€/each

85 mm€/each

55 440-8 MS 22.80 33.40 53.60 88.60

60 480-8 MS 22.80 33.40 53.60 88.60

70 560-8 MS 28.60 41.50 67.10 110.70

75 600-8 MS 28.60 41.50 67.10 110.70

79 632-8 MS 31.40 45.80 73.60 121.80

80 640-8 MS 31.40 45.80 73.60 121.80

82 656-8 MS 31.40 45.80 73.60 121.80

86 688-8 MS 31.40 45.80 73.60 121.80

87 •696-8 MS 31.40 45.80 73.60 121.80

90 720-8 MS 34.20 49.90 80.40 132.90

91 728-8 MS 34.20 49.90 80.40 132.90

92 736-8 MS 34.20 49.90 80.40 132.90

95 760-8 MS 34.20 49.90 80.40 132.90

96 768-8 MS 34.20 49.90 80.40 132.90

98 784-8 MS 34.20 49.90 80.40 132.90

99 •792-8 MS 34.20 49.90 80.40 132.90

100 800-8 MS 34.20 49.90 80.40 132.90

106 848-8 MS 34.20 49.90 80.40 132.90

110 880-8 MS 34.20 49.90 80.40 132.90

115 920-8 MS 37.10 54.20 87.00 144.40

118 944-8 MS 37.10 54.20 87.00 144.40

120 960-8 MS 37.10 54.20 87.00 144.40

125 1000-8 MS 37.10 54.20 87.00 144.40

128 1024-8 MS 40.00 58.30 93.70 154.90

132 1056-8 MS 40.00 58.30 93.70 154.90

140 1120-8 MS 40.00 58.30 93.70 154.90

155 1240-8 MS 42.80 62.50 100.40 166.00

158 1264-8 MS 45.70 66.70 107.20 177.00

160 1280-8 MS 51.50 75.00 120.60 199.40

164 1312-8 MS 51.50 75.00 120.60 199.40

169 1352-8 MS 51.50 75.00 120.60 199.40

175 1400-8 MS 51.50 75.00 120.60 199.40

176 •1408-8 MS 51.50 75.00 120.60 199.40

180 1440-8 MS 51.50 75.00 120.60 199.40

185 1480-8 MS 54.20 79.10 127.20 210.40

200 1600-8 MS 57.00 83.40 134.00 221.30

220 1760-8 MS 59.80 87.60 140.60 232.30

225 1800-8 MS 59.80 87.60 140.60 232.30

227 •1816-8 MS 62.70 91.60 147.50 243.50

Belt Width


in mm

20 mm€/each

30 mm€/each

50 mm€/each

85 mm€/each

239 1912-8 MS 62.70 91.60 147.50 243.50

280 2240-8 MS 71.20 104.30 167.40 276.70

299 •2392-8 MS 74.20 108.40 174.10 287.80

350 2800-8 MS 88.50 129.20 207.60 343.10

Belt Width



63

Pitch 3M


in mm€/mm.

48 144-3 M 0.80

50 150-3 M 0.80

53 159-3 M 0.80

55 165-3 M 0.80

56 168-3 M 0.80

58 174-3 M 0.80

59 177-3 M 0.80

67 201-3 M 0.80

68 204-3 M 0.80

70 210-3 M 0.80

71 213-3 M 0.80

72 216-3 M 0.80

75 225-3 M 0.80

80 240-3 M 0.80

82 246-3 M 0.80

84 252-3 M 0.80

85 255-3 M 0.80

89 267-3 M 0.80

95 285-3 M 0.90

100 300-3 M 0.90

104 312-3 M 0.90

106 318-3 M 0.90

112 336-3 M 0.90

113 339-3 M 0.90

121 363-3 M 0.90

128 384-3 M 0.90

130 390-3 M 0.90

140 420-3 M 0.90

149 447-3 M 0.90

158 474-3 M 0.90

160 480-3 M 0.90

162 486-3 M 0.90

165 495-3 M 0.90

167 501-3 M 1.20

171 513-3 M 1.20

174 522-3 M 1.20

175 525-3 M 1.20

•177 531-3 M 1.20

179 537-3 M 1.20

188 564-3 M 1.20

190 570-3 M 1.20

202 606-3 M 1.20

211 633-3 M 1.20

223 669-3 M 1.20

236 708-3 M 1.20

237 711-3 M 1.50

257 753-3 M 1.50


in mm€/mm.

281 843-3 M 1.50

•294 882-3 M 1.60

315 945-3 M 1.60

•354 1062-3 M 1.60

375 1125-3 M 1.80

392 1176-3 M 1.80

•421 1263-3 M 1.80

467 1401-3 M 2.20

523 1569-3 M 2.50

600 1800-3 M 2.80

650 1950-3 M 3.00

880 2640-3 M 4.30

1130 3390-3 M 5.30

2268 6804-3 M 10.30

Pitch 5M


in mm€/mm.

45 225-5 M 0.80

60 300-5 M 0.90

66 330-5 M 0.90

70 350-5 M 0.90

75 375-5 M 0.90

80 400-5 M 0.90

85 425-5 M 0.90

90 450-5 M 0.90

95 475-5 M 0.90

100 500-5 M 1.20

105 525-5 M 1.20

107 535-5 M 1.20

113 565-5 M 1.20

120 600-5 M 1.50

123 615-5 M 1.50

124 620-5 M 1.50

Pitch 5M


in mm€/mm.

126 630-5 M 1.50

127 635-5 M 1.50

133 665-5 M 1.50

139 695-5 M 1.50

140 700-5 M 1.50

142 710-5 M 1.50

144 720-5 M 1.50

•148 740-5 M 1.50

151 755-5 M 1.60

160 800-5 M 1.60

170 850-5 M 1.60

178 890-5 M 1.60

185 925-5 M 1.80

•190 950-5 M 1.80

200 1000-5 M 1.80

210 1050-5 M 1.90

225 1125-5 M 1.90

235 1175-5 M 2.00

254 1270-5 M 2.00

•284 1420-5 M 2.10

300 1500-5 M 2.30

•319 1595-5 M 2.40

•358 1790-5 M 2.50

•360 1800-5 M 2.50

•379 1895-5 M 2.60

•400 2000-5 M 2.60

420 2100-5 M 2.70

450 2250-5 M 2.80

474 2370-5 M 2.90

•505 2525-5 M 3.00

605 3025-5 M 4.20

668 3340-5 M 4.60

689 3430-5 M 4.70

754 3770-5 M 5.10

852 4260-5 M 5.80

1400 7000-5 M 9.60

M.E.C. TIMING BELT HTD – SLEEVES


64


in mm€/mm.

55 440-8 MS 1.00

60 480-8 MS 1.00

70 560-8 MS 1.50

75 600-8 MS 1.50

79 632-8 MS 1.50

80 640-8 MS 1.50

82 656-8 MS 1.50

86 688-8 MS 1.50

•87 696-8 MS 1.50

90 720-8 MS 1.60

91 728-8 MS 1.60

92 736-8 MS 1.60

95 760-8 MS 1.60

96 768-8 MS 1.60

98 784-8 MS 1.60

Pitch 8M


in mm€/mm.

47 376-8 M 0.90

53 424-8 M 0.90

60 480-8 M 0.90

65 520-8 M 0.90

70 560-8 M 1.20

75 600-8 M 1.50

78 624-8 M 1.50

80 640-8 M 1.50

82 656-8 M 1.50

90 720-8 M 1.50

98 784-8 M 1.50

100 800-8 M 1.50

106 848-8 M 1.60

110 880-8 M 1.60

114 912-8 M 1.60

115 920-8 M 1.60

118 944-8 M 1.60

120 960-8 M 1.60

130 1040-8 M 1.80

140 1120-8 M 1.90

144 1152-8 M 1.90

150 1200-8 M 1.90

160 1280-8 M 2.00

163 1304-8 M 2.00

166 1328-8 M 2.10

169 1352-8 M 2.10


in mm€/mm.

170 1360-8 M 2.10

174 1392-8 M 2.10

180 1440-8 M 2.10

197 1576-8 M 2.20

200 1600-8 M 2.30

220 1760-8 M 2.50

225 1800-8 M 2.50

250 2000-8 M 2.70

281 2248-8 M 2.70

299 2392-8 M 2.90

300 2400-8 M 3.00

313 2504-8 M 3.10

325 2600-8 M 3.20

342 2736-8 M 3.40

350 2800-8 M 3.40

390 3120-8 M 3.70

400 3200-8 M 3.80

410 3280-8 M 4.10

450 3600-8 M 4.50

500 4000-8 M 4.90

550 4400-8 M 5.70

700 5600-8 M 6.60

825 6600-8 M 8.00

Pitch 14M


in mm€/mm.

69 966-14 M 3.40

85 1190-14 M 3.80

100 1400-14 M 4.30

110 1400-14 M 4.50

115 1610-14 M 4.60

127 1778-14 M 4.90

135 1890-14 M 5.00

150 2100-14 M 5.30

165 2310-14 M 5.50

175 2450-14 M 5.80

185 2590-14 M 6.10

190 2660-14 M 6.50

200 2800-14 M 6.60

225 3150-14 M 7.00

250 3500-14 M 7.40

275 3850-14 M 8.20

309 4326-14 M 9.00

327 4578-14 M 9.40

340 4760-14 M 9.70

380 5320-14 M 10.80

410 5740-14 M 11.50

440 6160-14 M 12.60

490 6860-14 M 14.10

Pitch 8MS


in mm€/mm.

•99 792-8 MS 1.60

100 800-8 MS 1.60

106 848-8 MS 1.60

110 880-8 MS 1.60

115 920-8 MS 1.80

118 944-8 MS 1.80

120 960-8 MS 1.80

125 1000-8 MS 1.80

128 1024-8 MS 1.90

132 1056-8 MS 1.90

140 1120-8 MS 1.90

155 1240-8 MS 2.00

158 1264-8 MS 2.10

160 1280-8 MS 2.30

164 1312-8 MS 2.30


in mm€/mm.

169 1352-8 MS 2.30

175 1400-8 MS 2.30

•176 1408-8 MS 2.30

180 1440-8 MS 2.30

185 1480-8 MS 2.40

200 1600-8 MS 2.50

220 1760-8 MS 2.60

225 1800-8 MS 2.60

•227 1816-8 MS 2.70

239 1912-8 MS 2.70

280 2240-8 MS 3.00

•299 2392-8 MS 3.10

350 2800-8 MS 3.80



65

Characteristics

The HTD CXP and CXA belts are especially recommended for transmissions with heavy or quickly changeable loads. They allow:• the transmissible power to be increased by up to 50% and 100% , with consequent reduction of the width of the belt ; • the use of the same pulleys provided for the HTD system. This means that the function allowing interchanges with other deep profile systems is maintained; • improved working life of the current transmissions, without changing the pulley

Available pitch : CPX 3 – 5 – 8 – 14 MCXA 8 M – 14 M

CXP, 50% increase in life for each inch of width.50% more life compared to transmissions with standard HTD and 100% for CXA as indicated above compared to standard HTD.More compact transmissions.Reduction of the real costs.Better efficiency.Less noise.Resistant to temperatures from - 40° to +100° C Resistant to oil and ozone.

Performances

Pitchest

mmhs

mmht

mm

3 M 3 2.4 1.25 M 5 3.6 2.18 M 8 5.6 3.414 M 14 10.0 6.1

N.B. CXP and CXA as well as transmitting considerably more power, also offer less bulk and considerable price saving of the respective pulleys.

CXP is in polychloroprene with plaited glass fibre inserts. For CXA, the blend is the same as for the CXP but the inserts are in aramid.Available pitch : 3-5-8 -14 M for CXP and 8 M for CXA; in preparation 14 M

Classification of the M.E.C. TIMING BELT HTD CXP and CXA beltsThe belts are available in the following pitch distinguished by the commercial names shown to the side and the following standard widths.

Commercialname

Pitchmm

Notch thickness mm

Tot. thicknessmm

standard widthsin mm

3 M CXP 3 1.2 2.4 6-9-15

5 M CXP 5 2.1 3.6 9-15-25

8 M CXP 8 3.4 5.6 20-30-50-85

14 M CXP 14 6.1 10 40-55-85-115-170

8 M CXA 8 3.4 5.6 20-30-50-85

Identification of the M.E.C. TIMING BELT HTD CXP and CXA belts

The M.E.C. TIMING BELT HTD CXP and CXA belts are distinguished by pitch length in mm , pitch in mm, width in mm.

Please consult the Calculation booklet for Technical features.

Example:A belt with a pitch length of 960 mm or 1120, pitch 8 mm and width 50mm is indicated as follows:

960 8M 50 CXP or 1120 8M 50 CXA

M.E.C. TIMING BELT HTD CXP BELTS50 % more power compared to the HTD Standard belts (see pages 69-70)

andM.E.C. TIMING BELT HTD CXA BELTS100% more power compared to the HTD Standard belts (see pages 69-70)

66

Table 1Standard tolerances on the width of the TIMING BELT HTD CXP and CXA belts

Width of the belt (mm)

Tolerance on width (mm)

Up to 838 from 838 to 1676 over 1676

- 11.1 + 0.5- 0.8

+ 0.5- 0.8

--

11.1 38.1 + 0.8- 0.8

+0.8- 1.3

+0.8- 1.3

38.1 50.8 +0.8- 1.3

+1.3- 1.3

+1.3- 1.5

50.8 72.6 +1.3- 1.5

+1.5- 1.5

+1.5- 2.0

Table 2Standard tolerances on the thickness of the TIMING BELT HTD CXP and CXA belts

TypeCXP and CXA

Thickness(mm)

Degree 1 Tolerances (mm)Degree 2

Standard

CXP 3 2.4 ± 0.15 ± 0.25 ± 0.6

CXP 5 3.8 ± 0.15 ± 0.25 ± 0.6

CXP e CXA 8 5.4 ± 0.15 ± 0.25 ± 0.6

CXP e CXA 14 9.7 ± 0.15 ± 0.25 ± 0.6

Table 3Standard tolerances on development of the TIMING BELT HTD CXP and CXA belts

Length of the belt (mm) Tolerance on the development (mm) Tolerance on the wheelbase (mm)

111 384 ± 0.45 ± 0.225

384 501 ± 0.50 ± 0.25

501 753 ± 0.60 ± 0.30

753 960 ± 0.65 ± 0.325

960 1245 ± 0.75 ± 0.375

1245 1600 ± 0.80 ± 0.40

1600 1760 ± 0.85 ± 0.425

1760 2000 ± 0.90 ± 0.45

2000 2800 ± 0.95 ± 0.475

Per L > 2286( 0.95 + x 0.03)

L-2286

254( 0.95 + x 0.015)

L-2286

254

For special uses such as fixed wheelbase transmissions which require different tolerances from those standard, please contact our technical department.

SYNCHRONOUS HTD, CXP and CXA BELT TOLERANCES

67

Pitch 3M CXP

TypePitch and

development

in mm

Teeth no.6 mm€/each

9 mm€/each

15 mm€/each

111-3M 111 37 7.20 9.60 14.80

117-3M 117 39 7.30 10.40 15.80

129-3M 129 43 8.00 10.40 16.20

144-3M 144 48 8.60 11.40 18.40

159-3M 159 53 9.20 11.80 18.70

168-3M 168 56 9.00 12.60 18.80

174-3M 174 58 9.20 12.70 19.90

177-3M 177 59 9.20 12.80 20.50

204-3M 204 68 10.00 13.30 20.60

210-3M 210 70 10.10 13.30 20.70

213-3M 213 71 10.30 13.40 20.70

216-3M 216 72 10.30 13.60 21.40

225-3M 225 75 10.40 13.80 21.60

240-3M 240 80 10.40 14.00 22.00

246-3M 246 82 10.50 14.20 22.80

252-3M 252 84 10.80 14.20 22.90

255-3M 255 85 10.80 14.40 22.90

267-3M 267 89 11.00 14.50 23.20

300-3M 300 100 11.20 14.50 23.20

318-3M 318 108 11.40 14.60 24.10

336-3M 336 112 11.80 15.80 24.60

339-3M 339 113 11.80 15.80 24.80

363-3M 363 121 12.60 16.00 24.90

384-3M 384 128 12.60 16.10 25.50

390-3M 390 130 12.70 16.10 25.60

420-3M 420 140 12.70 16.20 25.90

447-3M 447 149 13.30 17.20 26.90

474-3M 474 158 13.40 17.40 27.80

480-3M 480 160 13.40 17.40 28.10

489-3M 489 163 13.60 17.50 28.20

495-3M 495 165 13.70 17.80 28.80

501-3M 501 167 13.80 18.10 29.10

513-3M 513 171 14.00 18.10 29.30

522-3M 522 174 14.20 18.20 29.50

525-3M 525 175 14.20 18.20 29.60

537-3M 537 179 14.40 18.40 30.00

564-3M 564 188 14.50 18.70 30.30

570-3M 570 190 14.80 19.40 31.40

606-3M 606 202 15.40 19.90 31.70

612-3M 612 204 15.80 20.60 32.40

633-3M 633 211 15.80 20.60 33.00

Belt Width

TypePitch and

development

in mm


9 mm€/each

15 mm€/each

708-3M 708 236 15.90 21.60 34.00

711-3M 711 237 15.90 22.00 34.10

753-3M 753 251 18.20 23.70 38.80

843-3M 843 281 18.70 24.60 40.10

882-3M 882 294 20.60 26.00 43.30

945-3M 945 315 21.60 27.80 45.20

960-3M 960 320 22.00 28.80 46.20

1041-3M 1041 347 22.80 29.30 47.10

1068-3M 1068 356 23.20 30.30 48.70

1071-3M 1071 357 23.20 30.70 49.00

1125-3M 1125 375 24.30 31.60 50.60

1176-3M 1176 392 25.50 33.20 52.80

1245-3M 1245 415 29.10 37.00 61.50

1569-3M 1569 523 30.50 40.60 64.60

Belt Width

Pitchest

mmhs

mmht

mm

3 M 3 2.4 1.25 M 5 3.6 2.18 M 8 5.6 3.414 M 14 10.0 6.1

M.E.C. TIMING BELT HTD CXP

68

Pitch 5M CXP

TypePitch and

development

in mm


15 mm€/each

25 mm€/each

265-5M 265 53 15.00 23.90 37.50

295-5M 295 59 15.00 23.90 37.50

300-5M 300 60 15.00 23.90 37.50

330-5M 330 66 16.10 23.90 37.50

350-5M 350 70 16.10 25.60 40.00

375-5M 375 75 16.20 26.00 41.10

400-5M 400 80 16.60 26.70 43.20

425-5M 425 85 17.30 27.80 43.50

450-5M 450 90 17.40 28.10 44.80

460-5M 460 92 18.10 28.50 45.60

475-5M 475 95 18.30 28.90 46.20

500-5M 500 100 18.70 29.60 47.40

535-5M 535 107 20.00 30.70 49.20

565-5M 565 113 20.40 31.20 50.40

600-5M 600 120 20.50 31.50 50.60

615-5M 615 123 20.60 31.80 51.00

620-5M 620 124 20.60 32.30 51.50

630-5M 630 126 20.90 32.80 51.70

635-5M 635 127 21.00 33.40 51.90

665-5M 665 133 21.10 33.50 52.10

700-5M 700 140 21.80 34.70 54.60

710-5M 710 142 22.50 35.40 55.70

755-5M 755 151 22.70 36.00 56.50

•800-5M 800 160 22.80 36.30 57.10

890-5M 890 178 24.10 39.50 61.00

900-5M 900 180 24.40 39.80 61.30

925-5M 925 185 24.90 39.90 62.10

1000-5M 1000 200 26.60 41.10 65.30

1050-5M 1050 210 27.70 43.40 68.40

1125-5M 1125 225 28.90 46.20 73.10

1270-5M 1270 254 32.40 50.40 80.70

1500-5M 1500 300 38.50 61.30 96.40

Belt Width

TypePitch and

development

in mm


30 mm€/each

50 mm€/each

85 mm€/each

376-8M 376 47 27.80 40.90 68.60 115.50

416-8M 416 52 28.90 44.70 71.60 121.80

424-8M 424 53 31.00 46.00 76.40 130.20

480-8M 480 60 34.30 51.50 78.90 147.80

560-8M 560 70 38.90 58.30 97.30 165.00

600-8M 600 75 40.10 59.90 99.90 171.20

624-8M 624 78 41.20 61.30 102.50 174.60

640-8M 640 80 42.70 62.60 105.40 178.00

656-8M 656 82 44.40 65.20 108.70 184.20

720-8M 720 90 46.00 68.60 114.70 192.90

776-8M 776 97 47.70 71.10 119.90 204.50

784-8M 784 98 48.70 72.10 120.80 206.80

800-8M 800 100 49.60 73.10 122.50 208.50

880-8M 880 110 51.50 77.40 127.70 218.00

912-8M 912 114 51.50 79.10 132.10 224.20

920-8M 920 115 54.70 80.10 133.00 226.10

960-8M 960 120 55.70 82.70 138.90 234.60

1040-8M 1040 130 59.10 88.70 147.80 254.60

1120-8M 1120 140 63.30 93.80 151.80 260.40

1160-8M 1160 145 65.20 95.00 155.00 267.60

1200-8M 1200 150 66.00 99.90 165.00 281.50

1280-8M 1280 160 70.50 104.40 173.80 296.30

1304-8M 1304 163 72.10 105.40 176.40 301.30

1328-8M 1328 166 73.10 106.90 179.00 305.70

1360-8M 1360 170 73.90 107.70 182.40 308.30

1424-8M 1424 179 74.80 112.00 188.80 315.30

1440-8M 1440 180 75.60 114.70 190.20 323.20

1600-8M 1600 200 82.70 122.50 193.10 347.40

1760-8M 1760 220 88.70 133.00 221.60 376.10

1800-8M 1800 225 91.20 135.60 226.10 383.90

2000-8M 2000 250 99.90 149.40 247.70 424.00

2248-8M 2248 281 111.30 164.20 273.50 470.70

2400-8M 2400 300 117.30 174.60 291.90 499.50

2800-8M 2800 350 134.60 198.80 334.60 566.10

Belt Width

Pitch 8M CXP

M.E.C. TIMING BELT HTD CXA

69

Pitch 14M CXP

TypePitch and

development

in mm


55 mm€/each

85 mm€/each

115 mm€/each

170 mm€/each

966-14M 966 69 269.30 372.60 575.80 778.80 1144.60

1190-14M 1190 85 290.40 399.60 619.30 836.10 1249.20

1400-14M 1400 100 315.30 437.80 675.00 914.40 1346.10

1610-14M 1610 115 351.00 493.20 755.90 1020.90 1511.10

1778-14M 1778 127 366.60 506.40 783.50 1044.10 1559.00

1890-14M 1890 135 377.80 525.30 807.70 1091.70 1611.20

2100-14M 2100 150 404.80 561.20 864.10 1165.60 1721.40

2310-14M 2310 165 432.50 598.50 919.50 1245.30 1832.40

2450-14M 2450 175 451.60 738.30 963.90 1307.20 1931.40

2590-14M 2590 185 460.70 765.90 990.00 1337.50 1967.90

2800-14M 2800 200 496.80 778.80 1094.30 1431.20 2101.50

3150-14M 3150 225 528.10 786.10 1122.80 1519.90 2254.50

3500-14M 3500 250 576.80 797.40 1226.40 1660.50 2445.50

3850-14M 3850 275 599.20 864.10 1249.90 1787.20 2657.30

4326-14M 4326 309 693.80 955.40 1465.30 1988.70 3018.60

4578-14M 4578 327 724.50 1003.20 1538.70 2082.60 3075.90

Belt Width

Pitch 8M CXA

TypePitch and

development

in mm


30 mm€/each

50 mm€/each

85 mm€/each

800-8M 800 100 74.20 111.30 186.10 315.30

960-8M 960 120 83.20 126.30 208.40 357.60

1040-8M 1040 130 84.40 126.60 211.70 361.70

1120-8M 1120 140 89.10 133.50 221.20 380.70

1200-8M 1200 150 93.90 140.60 234.50 399.60

1280-8M 1280 160 100.40 147.90 246.30 421.00

1304-8M 1304 163 101.10 150.20 250.30 429.50

1328-8M 1328 166 102.00 150.90 254.30 434.30

1360-8M 1360 170 104.40 154.90 259.30 439.80

1424-8M 1424 178 106.60 158.80 261.50 448.40

1440-8M 1440 180 108.30 161.20 269.40 459.60

1600-8M 1600 200 116.20 173.90 293.80 494.30

1760-8M 1760 220 129.00 188.80 314.20 535.50

1800-8M 1800 225 130.30 192.70 320.30 546.40

2000-8M 2000 250 143.00 211.60 353.10 601.50

2248-8M 2248 281 158.00 235.50 389.30 667.30

2400-8M 2400 300 167.40 273.50 416.20 709.00

2800-8M 2800 350 191.00 283.00 476.30 806.80

Belt Width



Pitchest

mmhs

mmht

mm

8 M 8 5.6 3.414 M 14 10.0 6.1

70

TypePitch and

development

in mm


55 mm€/each

85 mm€/each

115 mm€/each

170 mm€/each

966-14M 966 69 581.90 779.20 1161.20 1527.30 2215.00

1190-14M 1190 85 638.90 855.60 1275.10 1677.10 2432.10

1400-14M 1400 100 684.50 916.80 1366.20 1797.10 2630.60

1610-14M 1610 115 741.60 993.00 1480.00 1946.70 2823.10

1778-14M 1778 127 798.70 1069.50 1593.80 2096.40 3040.20

1890-14M 1890 135 855.70 1146.10 1707.80 2246.30 3257.40

2100-14M 2100 150 884.20 1184.10 1764.70 2321.10 3365.90

2310-14M 2310 165 941.30 1260.60 1878.60 2470.90 3582.90

2450-14M 2450 175 981.10 1314.00 1958.10 2575.80 3735.00

2590-14M 2590 185 1009.70 1352.10 2015.10 2650.50 3843.50

2800-14M 2800 200 1084.00 1451.50 2163.10 2845.20 4126.00

3150-14M 3150 225 1140.90 1528.00 2276.90 2995.10 4343.00

3500-14M 3500 250 1255.10 1680.70 2504.60 3294.40 4777.30

3850-14M 3850 275 1357.70 1818.00 2709.50 3564.00 5168.20

4326-14M 4326 309 1523.20 2039.60 3039.70 3998.40 5549.90

4578-14M 4578 327 1580.30 2116.20 3153.50 4148.00 6015.20

Belt Width

Pitch 14M CXA

M.E.C. TIMING BELT HTD CXP - SLEEVES

Pitchest

mmhs

mmht

mm

8 M 8 5.6 3.414 M 14 10.0 6.1

71

Pitch 3M CXP

Teeth no.Pitch and

developmentin mm

€/mm

37 111-3M 1.00

39 117-3M 1.00

43 129-3M 1.00

48 144-3M 1.20

53 159-3M 1.20

56 168-3M 1.20

58 174-3M 1.50

59 177-3M 1.50

68 204-3M 1.60

70 210-3M 1.60

71 213-3M 1.60

72 216-3M 1.60

75 225-3M 1.60

80 240-3M 1.80

82 246-3M 1.80

84 252-3M 1.80

85 255-3M 1.80

89 267-3M 1.80

100 300-3M 1.80

108 318-3M 1.90

112 336-3M 1.90

113 339-3M 1.90

121 363-3M 2.00

128 384-3M 2.00

130 390-3M 2.00

140 420-3M 2.00

149 447-3M 2.10

158 474-3M 2.10

160 480-3M 2.10

163 489-3M 2.10

165 495-3M 2.10

167 501-3M 2.10

171 513-3M 2.10

174 522-3M 2.20

175 525-3M 2.20

179 537-3M 2.20

188 564-3M 2.20

190 570-3M 2.20

202 606-3M 2.30

204 612-3M 2.30

211 633-3M 2.30

236 708-3M 2.30

237 711-3M 2.40

Teeth no.Pitch and

developmentin mm

€/mm

251 753-3M 2.60

281 843-3M 2.70

294 882-3M 2.90

315 945-3M 3.00

320 960-3M 3.10

347 1041-3M 3.40

356 1068-3M 3.60

357 1071-3M 3.60

375 1125-3M 3.80

392 1176-3M 4.00

415 1245-3M 4.20

523 1569-3M 4.40

Pitch 5M CXP

Teeth no.Pitch and

developmentin mm

€/mm

53 265-5M 1.50

59 295-5M 1.50

60 300-5M 1.50

66 330-5M 1.60

70 350-5M 1.60

75 375-5M 1.70

80 400-5M 1.70

85 425-5M 1.80

90 450-5M 1.80

92 460-5M 1.90

95 475-5M 1.90

100 500-5M 1.90

107 535-5M 1.90

113 565-5M 2.10

120 600-5M 2.10

123 615-5M 2.10

124 620-5M 2.10

126 630-5M 2.10

127 635-5M 2.10

133 665-5M 2.10

140 700-5M 2.20

142 710-5M 2.30

151 755-5M 2.30

160 800-5M 2.30

178 890-5M 2.30

180 900-5M 2.40

185 925-5M 2.40

200 1000-5M 2.60

210 1050-5M 2.60

225 1125-5M 2.80

254 1270-5M 3.10

300 1500-5M 3.80

M.E.C. TIMING BELT HTD CXP - SLEEVES

72

Pitch 8M CXP

Teeth no.Pitch and

developmentin mm

€/mm

47 376-8M 1.20

52 416-8M 1.50

53 424-8M 1.50

60 480-8M 1.60

70 560-8M 1.80

75 600-8M 1.90

78 624-8M 1.90

80 640-8M 2.00

82 656-8M 2.00

90 720-8M 2.10

97 776-8M 2.20

98 784-8M 2.20

100 800-8M 2.20

110 880-8M 2.30

114 912-8M 2.30

115 920-8M 2.40

120 960-8M 2.40

Teeth no.Pitch and

developmentin mm

€/mm

130 1040-8M 2.60

140 1120-8M 2.70

145 1160-8M 2.80

150 1200-8M 2.80

160 1280-8M 2.90

163 1304-8M 3.10

166 1328-8M 3.10

170 1360-8M 3.10

179 1424-8M 3.20

180 1440-8M 3.20

200 1600-8M 3.60

220 1760-8M 4.00

225 1800-8M 4.00

250 2000-8M 4.50

281 2248-8M 4.50

300 2400-8M 5.10

350 2800-8M 6.00

Pitch 14M CXP

Teeth no.Pitch and

developmentin mm

€/mm

69 966-14M 5.70

85 1190-14M 6.30

100 1400-14M 7.20

115 1610-14M 7.60

127 1778-14M 8.00

135 1890-14M 8.20

150 2100-14M 8.80

165 2310-14M 9.40

175 2450-14M 9.90

185 2590-14M 10.10

200 2800-14M 10.80

225 3150-14M 11.90

250 3500-14M 12.60

275 3850-14M 13.40

309 4326-14M 15.60

327 4578-14M 16.40

Pitch 8M CXA

Teeth no.Pitch and

developmentin mm

€/mm

100 800-8M 3.10

120 960-8M 3.70

130 1040-8M 4.00

140 1120-8M 4.30

150 1200-8M 4.50

160 1280-8M 4.60

163 1304-8M 4.70

166 1328-8M 4.70

170 1360-8M 4.80

178 1424-8M 4.90

180 1440-8M 5.00

200 1600-8M 5.50

220 1760-8M 6.00

225 1800-8M 6.20

250 2000-8M 6.90

281 2248-8M 7.40

300 2400-8M 8.00

350 2800-8M 9.20

Pitch 14M CXA

Teeth no.Pitch and

developmentin mm

€/mm

69 966-14M 12.70

85 1190-14M 13.80

100 1400-14M 15.00

115 1610-14M 16.10

127 1778-14M 17.40

135 1890-14M 18.60

150 2100-14M 19.10

165 2310-14M 20.60

175 2450-14M 21.30

185 2590-14M 21.90

200 2800-14M 23.60

225 3150-14M 24.80

250 3500-14M 27.20

275 3850-14M 29.50

309 4326-14M 33.20

327 4578-14M 34.30

M.E.C. TIMING BELT HTD CXA - SLEEVES

M.E.C. TIMING BELT HTD CXA - SLEEVES

73

HPPD synchronous belts are characterized by a new profile double rounding of the notches which allows more power to be transmitted with the same pitch compared to a traditional synchronous notched belt. Furthermore, other advantages include the reduction of noise and interference,

increased resistance against the notch being kipped and shearing stress, precise angular transmission and constant speed up to 50 mt/sec., low tensioning, excellent reliability, compact dimensions and moderate maintenance.

Classification of the M.E.C. TIMING BELT HPPD belts

The M.E.C. TIMING BELT HPPD belts are available in the following pitch distinguished by commercial names indicated and in the following standard widths.

Commercialname

Pitchmm

Notch Thickness mm

Tot. Thicknessmm

Standard Widthsmm

3 M 3 1.2 2.4 6-9-15

5 M 5 2.1 3.6 9-15-25

8 M 8 3.4 5.6 20-30-50-85

14 M 14 6.1 10 40-55-85-115-170

Identification of the M.E.C. TIMING BELT HPPD belts

The M.E.C. TIMING BELT HPPD belts are identified by their pitch length in mm, pitch diameter in mm, and width in mm.

Example:A belt with a pitch length of 960 mm, pitch diameter of 8 mm and a width of 50 mm is described as follows:

860 8M 50 HPPD

M.E.C. TIMING BELT HPPD synchronous belts for industrial transmissions

74

Tables A, B, C show the respective width, development and thickness tolerance of the M.E.C TIMING BELT HPPD belts.

Table A - Tolerance on the width of M.E.C. TIMING BELT 3-5-8-14 M HPPD belts.

Width in mm Width Tolerance (mm)

Over up to up to 800 mm pitchlength

up to 800 mm over1760 mm pitch length

over 1760 mmpitch length

- 9 + 0.4- 0.8

+ 0.4- 0.8

--

9 40 ± 0.8 +0.8- 1.2

+0.8- 1.2

40 50 +0.8- 1.2

± 1.2 +1.2- 1.5

50 85 +1.2 ± 1.5 +1.5- 2.0

85 170 ± 1.5 +1.5- 2

± 2- 1.2

>170 ± 4.8 ± 4.8

Table B - Tolerance on development of M.E.C. TIMING BELT HPPD belts

over up toTolerance

mm

- 250 ± 0.40

250 380 ± 0.45

380 500 ± 0.50

500 750 ± 0.60

750 950 ± 0.65

950 1250 ± 0.75

1250 1500 ± 0.80

1500 1750 ± 0.85

1750 2000 ± 0.90

2000 2250 ± 0.95

2250 2500 ± 1.00

Belt widthin mm

over up toTolerance

mm

2500 2750 ± 1.05

2750 3000 ± 1.10

3000 3250 ± 1.15

3250 3500 ± 1.20

3500 3750 ± 1.25

3750 4000 ± 1.30

4000 4250 ± 1.35

4250 4500 ± 1.40

4500 5000 ± 1.50

5000 - ± 1.60

Belt widthin mm


TypeThickness measured

on notch mmDegree of tolerance

mm

3 M 2.4 ± 0.2

5 M 3.6 ± 0.25

8 M 5.6 ± 0.4

14 M 10.0 ± 0.6

20 M 13.2 ± 0.8

All M.E.C. TIMING BELT HPPD belts have a rectified outside surface and a specific fibreglass insert to ensure fluid movement.

Sectiont

mmhs

mmht

mm

3 M 3 2.4 1.25 M 5 3.6 2.18 M 8 5.6 3.414 M 14 10.0 6.120 M 20 13.2 9.0

TOLERANCE OF THE M.E.C. TIMING BELT HPPD BELTS

75



Pitch 3M HPPD

Teeth no.Pitch and

developmentin mm

6 mm€/each

9 mm€/each

15 mm€/each

58 174-3M 5.60 8.40 13.90

59 177-3M 5.60 8.40 13.90

67 201-3M 5.60 8.40 13.90

70 210-3M 5.60 8.40 13.90

71 213-3M 5.60 8.40 13.90

72 216-3M 5.60 8.40 13.90

75 225-3M 5.80 8.60 14.50

80 240-3M 5.80 8.60 14.50

87 261-3M 6.00 8.90 15.00

88 264-3M 6.00 8.90 15.00

89 267-3M 6.00 8.90 15.00

90 270-3M 6.30 9.60 15.90

118 354-3M 6.30 9.60 15.90

120 360-3M 6.30 9.60 15.90

140 420-3M 6.30 9.60 15.90

149 447-3M 7.50 10.70 17.60

153 459-3M 8.90 12.80 19.60

158 474-3M 9.60 14.90 23.60

174 522-3M 11.50 14.40 29.30

177 531-3M 11.50 14.40 29.30

188 564-3M 12.30 16.80 30.20

Belt Width

Pitch 5M HPPD

Teeth no.Pitch and

developmentin mm

9 mm€/each

15 mm€/each

25 mm€/each

53 265-5M 8.90 15.00 24.80

60 300-5M 8.90 15.00 24.80

68 340-5M 8.90 15.00 24.80

69 345-5M 8.90 15.00 24.80

70 350-5M 9.60 15.90 26.40

72 360-5M 9.60 15.90 26.40

74 370-5M 9.60 15.90 26.40

75 375-5M 9.60 15.90 26.40

80 400-5M 9.60 15.90 26.40

84 420-5M 10.00 16.60 27.90

90 450-5M 10.00 16.60 27.90

95 475-5M 10.00 16.60 27.90

100 500-5M 12.30 20.60 34.10

105 525-5M 12.30 20.60 34.10

110 550-5M 12.30 20.60 34.10

113 565-5M 12.30 20.60 34.10

116 580-5M 12.30 20.60 34.10

127 635-5M 13.40 22.30 37.20

134 670-5M 13.40 22.30 37.20

142 710-5M 13.40 22.30 37.20

148 740-5M 13.40 22.30 37.20

151 755-5M 13.60 22.90 37.90

156 780-5M 13.90 23.30 38.70

160 800-5M 13.90 23.30 38.70

170 850-5M 13.90 23.30 38.70

172 860-5M 14.20 23.80 39.60

192 960-5M 15.10 25.20 41.80

200 1000-5M 15.10 25.20 41.80

220 1100-5M 16.50 27.60 45.90

225 1125-5M 16.50 27.60 45.90

230 1150-5M 16.50 27.60 45.90

•319 1595-5M 22.30 37.20 62.00

•338 1690-5M 23.50 39.00 65.10

•400 2000-5M 25.20 41.80 69.80

M.E.C. TIMING BELT HPPD

76

Pitch 8M HPPD

Teeth no.Pitch and

developmentin mm

20 mm€/each

30 mm€/each

50 mm€/each

85 mm€/each

47 376-8 M 21.10 31.60 52.60 89.50

55 440-8 M 21.10 31.60 52.60 89.50

60 480-8 M 21.10 31.60 52.60 89.50

64 512-8 M 21.50 32.20 53.90 91.10

70 560-8 M 26.00 39.00 65.10 110.70

74 592-8 M 26.00 39.00 65.10 110.70

75 600-8 M 26.00 39.00 65.10 110.70

79 632-8 M 28.60 42.80 71.20 121.30

80 640-8 M 28.60 42.80 71.20 121.30

90 720-8 M 31.30 46.90 78.10 132.90

95 760-8 M 31.70 47.60 79.40 135.00

100 800-8 M 31.70 47.60 79.40 135.00

107 856-8 M 31.70 47.60 79.40 135.00

110 880-8 M 31.70 47.60 79.40 135.00

120 960-8 M 33.10 49.50 82.60 140.30

125 1000-8 M 33.10 49.50 82.60 140.30

130 1040-8 M 36.00 54.00 90.00 152.90

135 1080-8 M 36.00 54.00 90.00 152.90

140 1120-8 M 36.00 54.00 90.00 152.90

150 1200-8 M 39.10 58.90 98.00 166.60

153 1224-8 M 39.10 58.90 98.00 166.60

160 1280-8 M 47.10 70.70 117.80 200.30

169 1352-8 M 47.10 70.70 117.80 200.30

180 1440-8 M 47.10 70.70 117.80 200.30

200 1600-8 M 52.10 78.10 130.20 221.30

220 1760-8 M 55.80 83.70 139.60 237.10

225 1800-8 M 55.80 83.70 139.60 237.10

254 2032-8 M 66.80 102.40 168.10 285.40

263 2104-8 M 74.50 111.60 186.10 316.30

•325 2600-8 M 79.40 119.00 198.30 337.40

350 2800-8 M 86.70 130.20 217.00 368.90

•410 3280-8 M 109.10 163.80 272.80 463.90

•450 3600-8 M 119.00 178.70 297.60 506.00

Belt Width

Pitch 14M HPPD

Teeth no.Pitch and

developmentin mm

40 mm€/each

55 mm€/each

85 mm€/each

115 mm€/each

170 mm€/each

69 966-14M 148.80 204.70 316.30 409.20 632.40

76 1064-14M 148.80 204.70 316.30 409.20 632.40

92 1288-14M 161.70 222.90 343.10 449.10 674.80

96 1344-14M 164.80 227.30 350.50 455.80 689.10

100 1400-14M 168.60 231.90 358.50 463.90 716.90

115 1610-14M 183.60 252.30 390.10 504.80 780.00

126 1764-14M 193.40 266.00 411.10 532.10 822.20

•135 1890-14M 203.40 279.60 432.50 559.30 864.40

150 2100-14M 257.90 354.60 548.20 709.30 1096.40

175 2450-14M 287.80 395.60 611.30 791.20 1222.70

185 2590-14M 297.60 409.20 632.40 818.50 1265.00

200 2800-14M 312.60 429.70 664.00 859.40 1328.20

225 3150-14M 337.40 463.90 716.90 927.60 1433.50

240 3360-14M 357.10 491.10 759.00 982.20 1518.00

250 3500-14M 362.10 498.00 769.60 995.80 1539.00

275 3850-14M 396.90 545.70 843.30 1091.50 1686.70

309 4326-14M 451.50 620.70 959.20 1241.40 1918.60

Belt Width




77



Pitch 3M HPPD

Teeth no.Pitch and

developmentin mm

€/mm

58 3M- 174 0.90

59 3M-177 0.90

67 3M-201 0.90

70 3M-210 0.90

71 3M-213 0.90

72 3M-216 0.90

75 3M-225 0.90

80 3M-240 0.90

87 3M-261 0.90

88 3M-264 0.90

89 3M-267 0.90

90 3M-270 0.90

118 3M-354 1.00

120 3M-360 1.00

140 3M-420 1.10

149 3M-447 1.40

153 3M-459 1.50

158 3M-474 2.00

174 3M-522 2.00

177 3M-531 2.10

188 3M-564 2.10

Pitch 5M HPPD

Teeth no.Pitch and

developmentin mm

€/mm

53 5M-265 0.90

60 5M-300 0.90

68 5M-340 0.90

69 5M-345 0.90

70 5M-350 1.00

72 5M-360 1.00

74 5M-370 1.00

75 5M-375 1.00

80 5M-400 1.00

84 5M-420 1.00

90 5M-450 1.00

95 5M-475 1.00

100 5M-500 1.50

105 5M-525 1.50

110 5M-550 1.50

113 5M-565 1.50

116 5M-580 1.50

127 5M-635 1.60

134 5M-670 1.60

142 5M-710 1.60

148 5M-740 1.60

151 5M-755 1.60

156 5M-780 1.60

160 5M-800 1.70

170 5M-850 1.70

172 5M-860 1.70

192 5M-960 1.80

200 5M-1000 1.80

220 5M-1100 1.90

225 5M-1125 1.90

230 5M-1150 1.90

•312 5M-1595 2.50

•338 5M-1690 2.60

•400 5M-2000 2.70


78

Pitch 8M HPPD

Teeth no.Pitch and

developmentin mm

€/mm

47 8 M-376 1.00

55 8 M-440 1.00

60 8 M-480 1.00

64 8 M-512 1.00

70 8 M-560 1.50

74 8 M-592 1.50

75 8 M-600 1.50

79 8 M-632 1.50

80 8 M-640 1.60

90 8 M-720 1.70

95 8 M-760 1.70

100 8 M-800 1.70

107 8 M-856 1.70

110 8 M-880 1.70

120 8 M-960 1.80

125 8 M-1000 1.80

130 8 M-1040 1.90

135 8 M-1080 1.90

140 8 M-1120 1.90

150 8 M-1200 2.00

153 8 M-1224 2.10

160 8 M-1280 2.40

169 8 M-1352 2.40

180 8 M-1440 2.40

200 8 M-1600 2.60

220 8 M-1760 2.70

225 8 M-1800 2.70

254 8 M-2032 3.30

263 8 M-2104 3.50

•325 8 M-2600 4.00

350 8 M-2800 4.40

•410 8 M-3280 5.40

•450 8 M-3600 6.00

Pitch 14M HPPD

Teeth no.Pitch and

developmentin mm

€/mm

69 14M-966 3.70

76 14M-1064 3.70

92 14M-1288 4.10

96 14M-1344 4.10

100 14M-1400 4.20

115 14M-1610 4.30

126 14M-1764 4.60

•135 14M-1890 5.10

150 14M-2100 6.40

175 14M-2450 7.20

185 14M-2590 7.40

200 14M-2800 7.80

225 14M-3150 8.50

240 14M-3360 8.90

250 14M-3500 9.00

275 14M-3850 9.90

309 14M-4326 11.30




79

Pitch 8MS DD

TypePitch and

developmentin mm

20 mm€/each

30 mm€/each

50 mm€/each

85 mm€/each

1160-8MS-DD 1160 166.10 249.00 415.00 704.50

1168-8MS-DD 1168 166.80 250.20 416.80 708.60

1184-8MS-DD 1184 169.90 254.90 424.60 721.80

1200-8MS-DD 1200 171.60 257.40 429.00 729.10

1216-8MS-DD 1216 173.20 259.70 432.50 735.30

1240-8MS-DD 1240 174.80 262.50 437.00 743.20

1256-8MS-DD 1256 177.30 265.70 443.00 753.00

1264-8MS-DD 1264 177.70 266.40 444.20 755.00

1280-8MS-DD 1280 180.60 270.80 451.40 767.30

1304-8MS-DD 1304 181.60 272.50 453.50 771.20

1312-8MS-DD 1312 182.20 273.40 455.50 774.30

1400-8MS-DD 1400 190.50 285.90 476.50 810.00

1440-8MS-DD 1440 195.90 293.90 489.90 833.00

1480-8MS-DD 1480 199.90 299.90 499.80 849.40

1600-8MS-DD 1600 213.20 319.60 532.50 905.40

1760-8MS-DD 1760 233.20 349.40 582.30 989.90

1776-8MS-DD 1776 234.20 351.20 585.20 994.90

1800-8MS-DD 1800 234.70 352.20 586.90 997.90

Belt Width

Pitch 3M DD

TypePitch and

developmentin mm

6 mm€/each

9 mm€/each

15 mm€/each

501-3M-DD 501 39.10 49.90 80.00

513-3M-DD 513 39.50 50.20 80.30

522-3M-DD 522 40.00 50.80 81.20

525-3M-DD 525 40.10 50.90 81.20

537-3M-DD 537 41.00 52.20 83.30

564-3M-DD 564 41.20 52.40 83.80

570-3M-DD 570 41.70 53.00 84.90

606-3M-DD 606 42.70 54.40 86.60

612-3M-DD 612 42.70 54.50 86.70

633-3M-DD 633 44.50 56.70 90.70

708-3M-DD 708 46.30 59.30 94.80

711-3M-DD 711 46.80 59.40 95.10

Belt Width

DOUBLE SIDED TIMING BELT DD-HTD

80

Pitch 5M DD

TypePitch and

developmentin mm

9 mm€/each

15 mm€/each

25 mm€/each

565-5M-DD 565 56.30 87.80 136.80

600-5M-DD 600 56.40 88.00 136.90

615-5M-DD 615 56.60 88.30 137.70

620-5M-DD 620 56.70 88.60 137.90

630-5M-DD 630 57.00 89.00 138.80

635-5M-DD 635 57.20 89.40 139.80

665-5M-DD 665 58.20 90.80 141.50

710-5M-DD 710 62.50 97.60 152.00

755-5M-DD 755 63.20 99.10 154.30

800-5M-DD 800 63.90 99.70 155.40

835-5M-DD 835 65.70 102.30 160.00

890-5M-DD 890 68.10 106.40 166.00

900-5M-DD 900 68.30 107.20 166.80

Belt Width

Pitch 8M DD

TypePitch and

developmentin mm

20 mm€/each

30 mm€/each

50 mm€/each

85 mm€/each

600-8M-DD 600 92.20 138.20 232.60 394.90

624-8M-DD 624 95.40 142.90 240.20 408.60

640-8M-DD 640 96.80 145.00 244.60 414.50

656-8M-DD 656 99.10 148.30 250.20 424.30

720-8M-DD 720 105.00 157.70 266.20 451.30

776-8M-DD 776 111.90 167.50 282.20 479.80

784-8M-DD 784 112.30 168.30 283.50 482.10

800-8M-DD 800 114.40 169.50 287.80 492.10

880-8M-DD 880 119.00 178.70 301.30 511.10

912-8M-DD 912 123.10 184.20 310.40 528.80

920-8M-DD 920 126.50 188.40 317.30 542.00

960-8M-DD 960 126.60 189.90 320.20 542.80

1040-8M-DD 1040 136.70 204.90 346.20 588.30

1120-8M-DD 1120 144.40 217.20 366.70 621.90

1200-8M-DD 1200 151.10 227.80 385.40 651.50

1280-8M-DD 1280 159.80 240.00 404.50 685.90

1304-8M-DD 1304 163.50 244.90 413.10 701.90

1328-8M-DD 1328 165.60 248.20 419.10 710.90

1360-8M-DD 1360 167.60 251.90 426.60 720.10

1424-8M-DD 1424 172.20 257.80 435.80 740.00

1440-8M-DD 1440 173.40 260.80 440.90 745.40

1600-8M-DD 1600 188.40 283.20 477.50 808.70

1760-8M-DD 1760 205.30 307.40 518.80 881.00

1800-8M-DD 1800 206.80 312.90 528.30 892.50

2000-8M-DD 2000 228.70 342.80 579.00 986.50

2400-8M-DD 2400 313.80 457.70 744.10 1159.60

Belt Width

DOUBLE SIDED TIMING BELT DD-HTD

81

Pitch 8MS

Teeth no.Pitch length

in mm €/mm

145 1160-8MS-DD 7.40

146 1168-8MS-DD 7.40

148 1184-8MS-DD 7.50

150 1200-8MS-DD 7.60

152 1216-8MS-DD 7.60

155 1240-8MS-DD 7.80

157 1256-8MS-DD 7.80

158 1264-8MS-DD 8.00

160 1280-8MS-DD 8.20

163 1304-8MS-DD 8.20

164 1312-8MS-DD 8.20

175 1400-8MS-DD 8.60

180 1440-8MS-DD 8.70

185 1480-8MS-DD 9.00

200 1600-8MS-DD 9.60

220 1760-8MS-DD 10.40

222 1776-8MS-DD 10.50

225 1800-8MS-DD 10.50

Pitch 3M


in mm €/mm

167 501-3M-DD 4.60

171 513-3M-DD 4.80

174 522-3M-DD 4.80

175 525-3M-DD 4.80

179 537-3M-DD 4.90

188 564-3M-DD 4.90

190 570-3M-DD 4.90

202 606-3M-DD 5.00

204 612-3M-DD 5.00

211 633-3M-DD 5.20

236 708-3M-DD 5.30

237 711-3M-DD 5.40

Pitch 8M


in mm €/mm

75 600-8M-DD 4.30

78 624-8M-DD 4.40

80 640-8M-DD 4.50

82 656-8M-DD 4.60

90 720-8M-DD 4.80

97 776-8M-DD 5.10

98 784-8M-DD 5.10

100 800-8M-DD 5.20

110 880-8M-DD 5.30

114 912-8M-DD 5.40

115 920-8M-DD 5.50

120 960-8M-DD 5.50

130 1040-8M-DD 6.20

140 1120-8M-DD 6.60

150 1200-8M-DD 6.90

160 1280-8M-DD 7.20

163 1304-8M-DD 7.30

166 1328-8M-DD 7.40

170 1360-8M-DD 7.40

178 1424-8M-DD 7.60

180 1440-8M-DD 7.60

200 1600-8M-DD 8.50

220 1760-8M-DD 9.20

225 1800-8M-DD 9.30

250 2000-8M-DD 10.30

300 2400-8M-DD 13.60

Pitch 5M


in mm €/mm

113 565-5M-DD 5.00

120 600-5M-DD 5.00

123 615-5M-DD 5.00

124 620-5M-DD 5.00

126 630-5M-DD 5.00

127 635-5M-DD 5.00

133 665-5M-DD 5.10

142 710-5M-DD 5.30

151 755-5M-DD 5.40

160 800-5M-DD 5.40

167 835-5M-DD 5.70

178 890-5M-DD 5.80

180 900-5M-DD 5.80

DOUBLE SIDED TIMING SLEEVES DD – HTD

82

The M.E.C. BELT MULTIRIBS endless belts with triangular-shaped longitudinal ribbing along the ring are the latest innovation in V-belt transmissions to achieve high power transmission and high linear speed with reduced costs, in a limited area of space.

Characteristics of the M.E.C. BELT MULTIRIBS belts

A combination of a V-belt and flat belt. Maximum flexibility thanks to reduced belt thickness. Minimum vibration during movement.Reference standard ISO 9982.

pumps - mixers - exhaust fans - ventilator fans - printing, woodworking and textile machinery - crushers and drawing machines - especially suitable for transmissions with outside turnbuckle. Operating temperature -30° C +80° C.

UseDomestic appliances - driers - electrical equipment - engines (cars) - mechanical construction in general - shakers - centrifugal compressor -

Classification of the M.E.C. BELT MULTIRIBS beltsThe M.E.C. BELT MULTIRIBS belts are available in the following sections and identified by the commercial names next to them.

Commercialname

S (pitch)mm

hmm

H 1.6 2.35J 2.34 3.3L 4.70 7M 9.40 12

Identification of the M.E.C. BELT MULTIRIBS belts

The M.E.C. BELT MULTIRIBS belts are identified by the pitch development in tenths of an inch, by the type of section and by the number of ribbings.

Example:A belt with a pitch development of 200 tenths of an inch corresponding to 508 mm, section J and 3 ribbings will be written as follows:

200 J 3Please consult the Calculus booklet for Technical features.

Minimum recommended pitch diameters of the pulleysSections H and J mm 20 L mm 76 M mm 178

M.E.C. BELT MULTIRIBS SLEEVES AND BELTS

83

SECTION H pitch 1.6 mm

Type and pitchdevelopment

in tenths of a inch

Pitch lengthin mm

€/rib.

448H 1140

621H 1578

629H 1600

650H 1653

737H 1874

744H 1890

746H 1890

753H 1915

760H 1930

768H 1951

779H 1980

784H 1992

ON

REQ

UES

T

SECTION J pitch 2.34 mm


in tenths of a inch

Pitch lengthin mm

€/rib.

120J 305 2.40

130J 330 2.40

140J 355 2.40

150J 381 2.40

160J 406 2.40

170J 432 2.50

180J 457 2.50

190J 483 2.50

200J 508 2.50

•205J 521 2.50

220J 559 2.50

230J 584 2.50

240J 610 2.60

•250J 635 2.60

260J 660 2.60

•270J 686 2.60

•275J 698 2.60

280J 711 2.60

285J 724 2.60

•290J 737 2.60

300J 762 2.70

•303J 770 2.70

310J 787 2.70

320J 813 2.70

330J 838 2.70

340J 864 2.70

350J 889 2.70

360J 914 2.80

•369J 937 2.80

376J 955 2.80

•378J 960 2.80

380J 965 2.80

390J 991 2.80

400J 1019 2.80

•409J 1039 2.80

415J 1054 2.80

•417J 1059 3.00

430J 1092 3.00

435J 1105 3.00

437J 1110 3.00

•440J 1118 3.00

•445J 1130 3.00

•447J 1135 3.00

SECTION J pitch 2.34 mm


in tenths of a inch

Pitch lengthin mm

€/rib.

450J 1143 3.00

460J 1168 3.00

470J 1194 3.00

•472J 1199 3.00

480J 1219 3.00

490J 1245 3.00

500J 1270 3.00

504J 1280 3.00

•510J 1295 3.10

520J 1321 3.20

533J 1354 3.20

540J 1372 3.20

550J 1397 3.40

•560J 1422 3.40

562J 1427 3.40

•575J 1461 3.40

580J 1473 3.40

•590J 1499 3.40

598J 1519 3.40

•600J 1524 3.50

610J 1550 3.60

•625J 1588 3.80

630J 1600 3.80

•640J 1626 4.00

650J 1651 4.00

•655J 1664 4.00

•670J 1702 4.30

690J 1752 4.50

•700J 1778 4.60

•710J 1803 4.60

730J 1856 4.60

•760J 1930 4.80

770J 1956 4.80

•775J 1969 4.80

780J 1981 4.80

785J 1994 4.90

795J 2019 4.90

820J 2083 4.90

870J 2210 5.10

900J 2286 5.30

920J 2337 5.50

980J 2489 5.80

M.E.C. BELT MULTIRIBS



84

SECTION L pitch 4.70 mm SECTION L pitch 4.70 mm


in tenths of a inch

Pitch lengthin mm

€/rib.

1120L 2845 22.90

1140L 2896 22.90

1150L 2921 23.40

1180L 2997 23.50

1215L 3086 24.90

1230L 3124 25.10

1295L 3289 26.30

1310L 3327 26.70

1375L 3493 27.80

1455L 3696 29.10

1595L 4051 32.20

1650L 4191 33.50

1760L 4470 35.90

1820L 4623 36.70

1980L 5029 40.60

2120L 5385 43.50

2400L 6096 51.00

SECTION M pitch 9.40 mm


in tenths of a inch

Pitch lengthin mm

€/rib.

900M 2286 52.30

940M 2388 55.30

990M 2515 56.80

1060M 2692 61.50

1115M 2832 63.20

1150M 2921 64.90

1185M 3010 66.00

1230M 3124 68.40

1310M 3327 72.20

1390M 3531 76.40

1470M 3734 83.10

1610M 4089 90.20

1650M 4191 93.00

1760M 4470 100.90

1830M 4648 111.00

1980M 5029 116.00

2130M 5410 127.20

2410M 6121 148.60

2710M 6883 159.80

3010M 7645 183.90

3310M 8407 212.60

3610M 9169 234.00

3910M 9931 254.40

4210M 10693 272.50

4810M 12217 319.30

5410M 13741 362.30

6010M 15265 409.20


in tenths of a inch

Pitch lengthin mm

€/rib.

375L 954 10.80

390L 991 11.00

•410L 1041 11.00

425L 1080 11.20

•460L 1168 11.20

•470L 1194 11.20

•480L 1219 11.30

500L 1270 11.30

•510L 1295 11.30

•520L 1321 11.60

525L 1334 11.80

•530L 1346 12.00

540L 1372 12.00

550L 1397 12.00

560L 1422 12.40

•565L 1435 12.60

•580L 1473 12.60

•590L 1499 12.70

615L 1562 13.20

635L 1613 13.20

•650L 1651 13.30

655L 1664 13.30

675L 1715 13.80

•680L 1727 14.20

695L 1765 14.20

710L 1803 14.50

725L 1842 14.60

765L 1943 15.70

•770L 1956 15.70

780L 1981 15.80

795L 2019 15.90

815L 2070 16.20

825L 2096 16.30

840L 2134 16.30

865L 2197 16.80

880L 2235 17.30

915L 2324 18.20

930L 2362 18.30

975L 2477 18.40

990L 2515 20.40

1065L 2705 21.60

1080L 2743 21.80

M.E.C. BELT MULTIRIBS



85

Description

M.E.C. FLAT BELT MAXIFLEX OIL STAT flat endless belts are made up highly resistant, synthetic, endless tubular fabric which is protected on both sides by a thin layer of neoprene rubber. These belts are heat-resistant, and are also resistant to the swelling action of mineral and vegetable oils, aggression from hydrocarbons and acids.They are conductive, non-stretch and withstand heavy duty use at high linear speed.Their quality is such that it is possible to achieve transmissions without vibrations and with high peripheral speed. Moderate maintenance is required and little space is occupied. a) considerable adherenceb) high flexibilityc) consistent thicknessd) unchanging development over timee) extremely light

Dimensional characteristics:

1) thickness 0.9 mm2) width from 5 mm to 300 mm3) rated length at measuring tension of 10 Kg/cm with width from 210 mm to 3300 mm4) thickness tolerance +/- 0.1 mm5) width tolerance +/- 0.5 mm6) length tolerance +/- 1.5 mm

Transmittable power in HP per cm of width for arcs of contact of 180°

Linear Speedm/sec.

ø 15 mm ø 20 mm ø Minor Pulleyø 25 mm

ø 30 mm ≥ 35 mm

2.5 0.15 0.20 0.23 0.25 0.28

5 0.29 0.39 0.46 0.52 0.54

7.5 0.12 0.56 0.68 0.76 0.81

10 0.53 0.73 0.90 1 1.06

15 0.72 1.06 130 1.46 2.03

20 0.90 1.35 1.67 1.90 2.03

25 1.10 1.62 2 2.30 2.45

30 - 1.84 2.28 2.63 2.85

35 - - 2.50 2.86 3.15

40 - - 2.67 3.05 3.40

45 - - - 3.10 3.58

50 - - - 3.10 3.70

55 - - - 3.10 3.70

60 - - - - 3.70

MEC FLAT BELT OIL STAT MAXIFLEX ENDLESS FLAT SLEEVES AND BELTS

86

Developmentmm

€/mm

210 1.50

220 1.50

230 1.50

240 1.50

250 1.50

260 1.50

270 1.50

280 1.50

290 1.50

300 1.50

315 1.50

330 1.50

340 1.50

350 1.50

360 1.50

370 1.50

385 1.50

400 1.50

410 1.50

420 1.50

430 1.50

440 1.50

450 1.50

460 1.50

470 1.50

480 1.50

490 1.50

500 1.50

515 1.50

520 1.50

530 1.50

545 1.50

560 1.50

575 1.50

580 1.50

590 1.50

600 1.50

605 1.60

620 1.60

635 1.60

640 1.60

650 1.60

Developmentmm

€/mm

660 1.60

665 1.60

680 1.60

690 1.60

700 1.60

710 1.60

720 1.70

730 1.70

740 1.70

750 1.70

760 1.70

770 1.70

780 1.70

790 1.70

800 1.70

810 1.70

820 1.70

830 1.70

840 1.70

850 1.70

860 1.70

870 1.70

880 1.70

890 1.70

900 1.70

910 1.70

920 1.90

930 1.90

940 1.90

950 1.90

960 1.90

970 1.90

980 1.90

990 1.90

1000 1.90

1010 1.90

1020 1.90

1030 1.90

1040 1.90

1050 1.90

1060 1.90

1070 1.90

For intermediate lengths, the cost of the length immediately above is considered valid. Minimum quantity and delivery terms to be arranged.

Developmentmm

€/mm

1080 1.90

1090 1.90

1100 1.90

1110 1.90

1120 2.00

1130 2.00

1140 2.00

1150 2.00

1155 2.00

1160 2.00

1180 2.00

1200 2.00

1225 2.10

1250 2.10

1260 2.10

1275 2.10

1300 2.10

1325 2.10

1350 2.10

1370 2.10

1375 2.10

1400 2.10

1425 2.30

1450 2.30

1460 2.30

1475 2.30

1500 2.30

1530 2.40

1560 2.40

1590 2.40

1600 2.40

1620 2.50

1650 2.50

1660 2.50

1680 2.50

1700 2.50

1710 2.50

1740 2.50

1770 2.50

1800 2.50

1820 2.50

1835 2.60

M.E.C. FLAT BELT MAXIFLEX OIL STAT ENDLESS FLAT BELTS

87

Developmentmm

€/mm

1850 2.65

1860 2.65

1870 2.65

1900 2.65

1905 2.65

1920 2.75

1940 2.75

1975 2.75

2000 2.75

2010 2.75

2045 2.90

2080 2.90

2100 2.90

2120 3.00

2160 3.00

2200 3.00

2220 3.00

2240 3.15

2260 3.15

2280 3.15

2300 3.15

2320 3.15

2365 3.15

2400 3.15

2410 3.15

2430 3.15

2455 3.15

2500 3.15

2550 3.30

2600 3.30

2650 3.40

2700 3.40

2750 3.55

2800 3.55

2850 3.55

2900 3.55

2950 3.60

2980 3.60

3000 3.60

3050 3.80

3100 3.80

3150 3.80

Developmentmm

€/mm

3200 3.80

3250 4.00

3300 4.00

3505 5.10

3850 9.30

For intermediate lengths, the cost of the length immediately above is considered valid. Minimum quantity and delivery terms to be arranged.

M.E.C. FLAT BELT MAXIFLEX OIL STAT ENDLESS FLAT BELTS

88

Made of polyurethane and with polyamide inserts. It is the idea belt for machine tools and for all the machines that require high speed and a perfect and regular smoothness in a limited space.

To transmit more power in less space

• Exceptional abrasion resistance

• High modulus of compression

• High friction factor

• Better resistance to environmental agents

• Excellent resistance to fatigue

• Stability of tension

•Perfect smoothness without vibration at high speed

• Reduction of the width of the pulleys

• High transmission ratio

• Long working life of the pulleys with small diameter

• Wide field of use

• Reduction of the costs

Characteristics and advantages of the M.E.C. POLYFLEXOSIL BELT

The special blend of polyurethane has special physical properties which are significantly better compared to the most traditional materials usually used in the manufacturing of belts. As well as the excellent fatigue resistance and wear resistance, and the high friction factor, polyurethane also ensures excellent resistance to ozone, oxidation, heat and mineral oils. Polyurethane also allows adhesion on the strands to be improved as the belt is obtained by pressure die casting.

The properties of the material

The typical ribbing obtained by melting on the strands in polyamide ensures a higher transverse stiffness, without reducing the longitudinal bending capacity. The ribbing also helps heat dissipation of the belts during operation.

The special ribbing

The high friction factor given by the polyurethane, enables this belt to adopt the angle of 60°.This typical angle allows better support of the strands in polyamide for traction and higher and more stable tension. This allows more power to be transmitted with smaller sections.

The section and the angle

NOTE:MEC BELT POLIFLEXOSIL MULTIPLE belts can also be supplied: we do not recommend however, using more than three elements.

Section CodeRatedwidth

3M 3 mm5M 5 mm7M 7 mm11M 11 mm

Belt sections

M.E.C. POLYFLEXOSIL BELT

89

Type €/each

3M180 18.40

3M185 18.50

3M190 18.50

3M195 18.60

3M200 18.60

3M206 18.60

3M212 18.70

3M218 18.70

3M224 18.80

3M230 18.80

3M236 18.80

3M243 18.80

3M250 18.80

3M258 18.80

3M265 18.80

3M272 18.80

3M280 18.80

3M290 18.80

3M300 18.80

3M307 18.80

3M315 18.80

3M325 18.80

3M335 18.80

3M345 18.90

3M355 18.90

3M365 18.90

3M375 18.90

3M387 19.00

3M400 19.00

3M412 19.10

3M425 19.10

3M437 19.10

3M450 19.40

3M462 19.40

3M475 19.60

3M487 19.60

3M500 19.70

3M515 20.00

3M530 20.70

3M545 20.80

3M560 20.80

3M580 21.70

3M600 21.80

3M615 22.50

SECTION 3M

Type €/each

3M630 22.80

3M650 22.90

3M670 23.10

3M690 24.10

3M710 24.30

3M730 24.40

3M750 24.60

SECTION 3M

Type €/each

5M280 27.50

5M290 27.50

5M300 27.50

5M307 27.50

5M315 27.50

5M325 27.50

5M335 27.50

5M345 27.50

5M355 27.50

5M365 27.50

5M375 27.50

5M387 27.50

5M400 27.50

5M412 27.50

5M425 27.50

5M437 27.50

5M450 27.50

5M462 27.50

5M475 27.50

5M487 27.90

5M500 28.20

5M515 28.50

5M530 28.70

5M545 28.90

5M560 29.10

5M580 29.60

5M600 30.30

5M615 30.80

5M630 31.00

5M650 31.50

5M670 31.70

SECTION 5M

Type €/each

5M690 32.00

5M710 33.20

5M730 34.20

5M750 34.30

5M775 35.40

5M800 35.80

5M825 36.40

5M850 36.70

5M875 37.50

5M900 38.50

5M925 39.60

5M950 40.70

5M975 41.00

5M1000 41.10

5M1030 42.30

5M1060 42.70

5M1090 44.50

5M1120 45.70

5M1150 45.70

5M1180 46.80

5M1220 47.60

5M1250 49.00

5M1280 49.90

5M1320 51.00

5M1360 52.20

5M1400 53.00

5M1450 54.50

5M1500 55.50

5M1850 62.90

SECTION 5M


90

Type €/each

11M710 62.80

11M730 63.40

11M750 64.60

11M775 65.80

11M800 67.10

11M825 68.10

11M850 69.10

11M875 70.20

11M900 71.80

11M925 72.30

11M950 73.30

11M975 73.80

11M1000 75.70

11M1030 76.20

11M1060 78.00

11M1090 79.10

11M1120 81.20

11M1150 82.00

11M1180 82.70

11M1220 83.60

11M1250 84.80

11M1280 87.20

11M1320 87.80

11M1360 89.20

11M1400 91.80

11M1450 93.40

11M1500 96.20

11M1550 98.50

11M1600 100.90

11M1650 103.10

11M1700 106.50

11M1750 108.10

11M1800 111.20

11M1850 113.60

11M1900 115.90

11M1950 119.30

11M2000 124.00

11M2060 124.90

11M2120 128.30

11M2180 133.00

11M2240 135.70

11M2300 138.50

Type €/each

7M1800 71.00

7M1850 72.10

7M1900 74.60

7M1950 76.50

7M2000 78.50

7M2080 80.20

7M2120 82.40

7M2180 84.20

7M2240 86.00

7M2300 89.10

Type €/each

7M500 40.10

7M515 40.10

7M530 40.10

7M545 40.10

7M560 40.10

7M580 40.10

7M600 40.10

7M615 40.10

7M630 40.10

7M650 40.10

7M670 40.10

7M690 41.10

7M730 42.40

7M750 42.40

7M775 42.40

7M800 43.50

7M825 44.70

7M850 44.70

7M875 45.80

7M900 45.80

7M925 45.80

7M950 46.90

7M975 48.20

7M1000 67.50

7M1030 48.20

7M1060 49.30

7M1070 49.30

7M1090 51.60

7M1120 51.60

7M1150 52.50

7M1180 52.50

7M1220 54.00

7M1250 54.80

7M1280 56.30

7M1320 57.20

7M1360 57.20

7M1400 59.40

7M1450 59.40

7M1500 59.50

7M1550 62.90

7M1600 64.20

7M1650 66.50

7M1700 67.50

7M1750 68.60

SECTION 7M SECTION 7M SECTION 11M


91

These are made in 32 ounce cotton fabric with rubberised fabric overlaid with a sheet of rubber in the centre and outer surfaces in a light hazelnut colour. The edges are cut and finished and the outer piles are impregnated with resin

and, for special usage, they can be left untreated.Joining is by means of hot vulcanisation or stapling using metal staples.

As belts: for normal low, medium and high power transmissions of limited peripheral speed.As conveyor belts: any kind of internal handling at normal temperature of materials, loose or otherwise,

as long as they are not oily. They are also suitable for bucket elevators and belt conveyors running on metal, wood and laminated plastics.

Use

Characteristics:No. Piles Rated total load

thickness mmTheoretical weight per

m2/Kg.Maximum permitted work-

ing load Kg./cm width 2 3 2.4 12

2 (outer coarse piles) 3 2.4 12

3 4 3.6 18

3 (outer coarse piles) 4 3.6 18

4 5.8 5 24

5 7.3 6.4 30

6 9 7.8 36

7 11 9.2 42

8 12.50 10.6 48

Maximum operating temperature: 50° C

Recommended minimum pulley diameters:

2 piles mm 503 piles mm 1004 piles mm 150

M.E.C. FLAT TRANSMISSION BELTS 2-3-4-5-6-7-8, 32 OUNCE PILES FLAT BELTS

5 piles mm 2006 piles mm 2507 piles mm 3508 piles mm 450

92

M.E.C. FLAT TRANSMISSION BELTS 2-3-5-6-7-8, 32 OUNCE PLIES FLAT BELTS

Price per linear metre (for intermediate sizes the price of the next higher width has to be applied)

Ring closure by means of vulcanization. A supplement equal to the cost of 3 mt of the belt will be applied. N.B. : for 20 m sections, a supplement of 10%

Width20

€/ml.30

€/ml.40

€/ml.50

€/ml.60

€/ml.70

€/ml.80

€/ml.90

€/ml.100

€/ml.110

€/ml.120

€/ml.130

€/ml.

2 Piles 3.30 4.90 6.20 7.50 8.90 10.00 11.20 12.30 13.20 15.10 15.70 16.40

2 Coarse Plies 4.10 5.40 6.90 8.30 9.70 10.20 12.30 13.50 14.90 15.60 17.10 18.70

3 Piles 4.70 6.30 8.30 9.90 11.40 13.00 13.50 16.20 17.90 19.40 20.80 22.80

3 Coarse Plies 5.30 7.20 8.80 10.60 12.70 13.20 15.90 18.60 19.80 21.40 22.80 24.40

4 Plies 5.60 7.90 10.20 12.70 14.80 17.30 19.20 21.50 23.70 26.30 27.40 29.60

5 Plies 7.20 9.40 12.00 13.20 16.80 19.40 22.20 24.80 26.60 29.70 32.20 34.50

6 Plies 10.20 13.20 16.40 19.90 23.50 26.80 30.40 33.90 37.00 40.90 44.00 46.80

7 Plies 46.10 46.10 46.10 46.10 46.10 46.10 46.10 46.10 46.10 49.10 54.90 59.00

8 Plies 53.80 53.80 53.80 53.80 53.80 53.80 53.80 53.80 53.80 58.70 63.90 69.20

Standard width

Width140

€/ml.150

€/ml.160

€/ml.170

€/ml.180

€/ml.190

€/ml.200€/ml.

250€/ml.

300€/ml.

350€/ml.

400€/ml.

450€/ml.

2 Plies 18.60 18.90 19.90 21.40 22.30 23.50 24.40 30.40 37.00 43.40 44.70 55.20

2 Coarse Plies 19.10 20.80 22.30 23.40 24.20 26.00 26.80 33.20 39.30 42.00 52.40 58.20

3 Plies 24.20 25.10 26.90 29.00 30.30 31.90 33.40 41.50 52.30 57.30 65.40 73.60

3 Coarse Plies 26.10 28.10 30.30 31.80 33.40 34.90 36.70 45.80 54.80 63.80 71.00 80.10

4 Plies 31.50 33.70 35.60 37.80 39.70 42.30 44.30 54.80 65.20 72.70 85.90 97.20

5 Plies 37.40 39.10 43.00 45.60 48.60 51.10 52.40 65.90 78.80 92.20 103.70 115.90

6 Plies 51.10 54.40 58.70 62.20 67.10 69.20 73.30 89.40 108.30 125.60 141.80 160.00

7 Plies 65.90 71.20 72.70 76.10 81.10 87.40 90.80 112.50 132.70 153.70 174.70 195.50

8 Plies 75.50 81.10 86.50 89.40 95.70 99.30 104.80 130.50 153.70 181.00 207.50 233.00

Standard width

Width500€/m

550€/m

600€/m

650€/m

700€/m

750€/m

800€/m

850€/m

900€/m

950€/m

1000€/m

1200€/m

2 Plies 59.40 60.00 65.40 70.90 76.30 81.80 87.30 92.70 98.20 103.60 109.10 135.20

2 Coarse Plies 63.60 66.60 72.70 78.60 84.70 90.80 96.80 102.90 108.90 115.00 121.10 145.00

3 Plies 79.10 80.80 88.20 95.50 102.90 110.20 117.50 124.90 132.30 139.70 147.00 176.30

3 Coarse Plies 85.30 89.20 97.30 105.50 113.60 121.70 129.80 137.90 146.00 154.10 162.20 194.30

4 Plies 103.10 105.70 115.30 124.90 134.60 144.00 153.70 163.30 173.00 182.60 192.20 230.20

5 Plies 130.50 130.60 142.50 154.30 166.20 178.20 190.00 201.90 213.70 225.60 237.50 284.60

6 Plies 168.30 174.50 190.30 206.20 222.00 238.00 253.90 269.70 285.60 301.40 317.20 380.50

7 Plies 206.00 217.30 237.10 256.80 276.50 296.30 316.10 335.80 355.50 375.30 395.10 473.50

8 Plies 245.80 249.50 272.20 294.80 317.50 340.20 362.90 385.60 408.20 430.90 453.60 544.10

Standard width

93

The M.E.C. PROFILBELT OIL STAT belts are used for transporting material over horizontal, slanted or vertical surfaces. The covering is hot vulcanized onto the V-belt and must have an optimum dragging coefficient for the material transported. The M.E.C. PROFILBELT OIL STAT belts can be supplied in rolls or endless with the rubber surface available with different profiles, qualities, colours and hardness.They are used in sectors where wood is worked, cement industries, in glassworks , the canning industry, the fishing industry, paper mills, body repair shops, in agricultural machinery, transport of packaging and ceramic industry. Sections and profiles currently used are listed below but upon request other profiles can be produced.Request the price list. For all applications, a shrinkage between 2% and 4% is to be calculated on the initial length.

V-BELTS WITH KNURLED APPLICATION SECTIONS A-B-C-D

Knurled 1Notch distance 2 mm Notch height 1.5 mm

Knurled 3Notch distance 7 mmNotch height 1.5 mm

DiamondWidth 4 mm Length 8mm Height 3 mm

Knurled 2Notch distance 5 mmNotch height 2 mm

Knurled 4Notch distance 20 mmNotch height 2.5 mm

With Honeycomb thickness approximately 5 mm

V-BELTS WITH APPLICATION SECTION A

Application for section A Crest A

M.E.C. PROFILBELT OIL STAT BELTS with rubber backing

94

V-BELTS WITH APPLICATION SECTION C

Slatted/C Add./LC

Crest/LC Crest/CC

Crested/low Add./AC

Add./C Add./EC

V-BELTS WITH APPLICATION SECTION B

Crest LB Crest Crest/low Crest/CPB

Add./B Add./LB Add./B 4 mm Add./UB

95

V-BELTS WITH APPLICATION SECTION D

Add./D Slatted/D Add./ND

V-BELTS WITH APPLICATION SECTION B-C

App. cone sections B-C

Sect. Z-X

Cone-type add.

Patented belts for glazing machines

96

EXCERPT FROM GENERAL TERMS AND CONDITIONS

All customer orders are subject to the General Terms and Conditions of Sale, the provisions of which will apply to all supplies unless agreed otherwise by the parties, and must be set out in writing failing which they will be invalid. The agreed provisions must also be stated on the order and order confirmation form.Some of the important provisions of the Terms and Conditions are set out below (for the full document see www.azetagomma.com). The buyer is defined as the “Buyer” and A Zeta Gomma F.I. spa is defined as the “Seller” or “Supplier”.

PRICES:Unless agreed otherwise in writing, the sale prices in force on the date of the order and order confirmation form will apply. Returned goods must be sent, carriage paid, to the warehouse of A Zeta Gomma Forniture Industriali Spa, with packaging costs to be paid by the customer.

COST AND RISK OF TRANSPORT:The cost and risk of transport are borne by the customer.The goods are always shipped at the sole risk of the buyer, even if (by special arrangement) the sale is agreed free to destination. TERMS OF DELIVERY:A delivery date is confirmed in writing is only considered an indication and is never binding. The seller is always exempt and excluded from any liability for any loss or claim that may derive from events caused by the early or late delivery of all or part of the supplies. Where the delay is attributable to the Seller, claims for compensation may only be made for supply contracts in which a penalty clause has been expressly agreed.The amount of compensation may never exceed the value of the supplies, under any circumstances. The customer must accept the ordered products even if the delivery is late.

CONFORMITY:A Zeta Gomma Forniture Industriali Spa guarantees the conformity of all products supplied, i.e. they will matchthe quantity, quality and type described in the contract, which is the order subsequently accepted with a valid order confirmation form.

TOLERANCE:The above provisions on product conformity must allow for the usual tolerance on manufactured products.

COMPLAINTS AND DEFECTS:Any non-conformities detected by the buyer must be reported promptly in writing (failing which the complaint will be invalid) in order to allow A Zeta Gomma Forniture Industriali Spa to respond quickly and/or find a rapid solution to the complaint, if valid. LIABILITY:The supplied goods must be used as intended, in accordance with the product characteristics, as no liability can be accepted for any claims caused by damage due to improper or incorrect use of the goods.

RETURNS:Returned goods will not be accepted unless agreed in advance, in writing.Any requests for substitute materials will only be accepted under the following conditions (except for verified non-conformity issues):1) The supplied materials must be standard, with no specific construction or processing techniques or other special requirements fulfilled at the customer’s request.2) The request must be sent to the supplier within two months of delivery. Once the returns have been authorised, the goods must be accompanied by a delivery note indicating the details of the order. Goods must be returned carriage paid, in excellent condition. Returns will only be accepted at the sole discretion of A Zeta Gomma Forniture Industriali Spa. In all cases in which returned goods are accepted, A Zeta Gomma Forniture Industriali Spa will issue a credit note to the value of the supplies, less 15% of the total by way of flat-rate reimbursement of expenses.

PAYMENTS:- Methods of payment. Payments and other monies due to A Zeta Gomma Forniture Industriali Spa for any reason must be paid, net, in accordance with the agreed terms and sent to the supplier’s domicile. Payments or direct remittances to agents, representatives or auxiliaries of A Zeta Gomma Forniture Industriali Spa will not be deemed received until such time as they are materially available to A Zeta Gomma Forniture Industriali Spa as agreed in the order.-Terms. Delays or irregularities in all or part of the agreed payment will entitle the supplier (after giving written notice) to suspend supplies or terminate pending contracts for new or different products, even if the payments relate to other sales. The right to compensation for damages is reserved. Delays in payments caused by failure to comply with the agreed terms will automatically trigger the application of late payment interest (Italian Law 231/2002).Customers who have defaulted on payment may not make a claim against the supplier before having first paid all outstanding amounts in full. The supplier has the right of reimbursement in the case of any dispute or disagreement. There is no right of set-off against any claims or demands of any kind made against A Zeta Gomma Forniture Industriali Spa

RESERVATION OF TITLE:The delivered products will remain the property of A Zeta Gomma Forniture Industriali Spa until the price has been paid in full, in cases where all or part of the payment is to be made after delivery. In the case of a dispute and/or non-payment of even part of the price, A Zeta Gomma Forniture Industriali Spa may ask for the goods or products to be returned to its head office, by sending a written demand by registered post or certified email. The goods must be returned within 10 days from receipt of the request.

GOVERNING LAW AND FORUM:The supply agreement is governed by the laws of Italy.The court with sole jurisdiction is the court in the place of domicile of A Zeta Gomma Forniture Industriali Spa, which may however take legal action in the courts of the buyer’s domicile.

Sales Management

Sede

Via Radici in Piano, 449/1

41049 Sassuolo (MO) - Italy

Tel. +39 0536 867111

Fax +39 0536 806884 - 806945

Stabilimento Produttivo 1

Via S. Tommaso, 16/22


Nuovo Villaggio Artigiano S. Carlo

Stabilimento Produttivo 2

Via Trentino Alto Adige, 3


www.azetagomma.com

[email protected]

S.p.A.

Get a result every trip

Documents

Price list - A-Zeta Gomma V... · M.E.C. V-BELT is a trademark which stands out for the particularly sophisticated transmission belts whose high-quality and success are the result