Axes control1 program per time, up to 4 ISO executors at the same time for each controllerUp to 16 Interpolated axes Gear mode for machine traverse configurationBacklash compensation, pitch compensation

OperationDNC from CF or USBMDIProgram number searchProgram restart from Instruction or ToolDry run Single block Manual handle feed

InterpolationExact stopLinear, Circular, Helical interpolation

ProgrammingPlane selection: G17,G18,G19Workpiece coordinates: G52..G59Sub program callMacro variables: P0...P999

SpindleSpindle with encoder, Spindle without encoder, Spindle also as positioner depending on motor package

Tool200 tools as defaultDelta-tool table (to compensate the variations of the nominal tool dimension)Tool compensation (compensation of the tool radius, compensation for 3 dimensions)

ProgramUp to 999 different programs stored in memory

HardwareControllers Power N, Power F, Power K controllers. Please refer to the related datasheets

Application ISO VMC

The information and pictures are subject to change. For complete and exaustive information please refer to the manuals

Tex Computer ISO VMC is the powerful and flexible application providing advanced CNC functions for VMC machines. Different solutions are available, features and graphics are customizable according to the OEM requirements.

Application ISO VMC

Basic G commands

G0 Rapid traverseG1 Linear InterpolationG2 Clockwise Circular/Helical interpolationG3 Anticlockwise Circular/Helical interpolationG4 Dwell timeG5 Continuous-Path modeG6 Coordinates of the center of arc related to the initial/final pointG7 Disable Continuous-Path modeG8 Enable nurbspline modeG9 Disable nurbspline modeG10 Disable speculare modeG11 Speculare axis XG12 Speculare axis YG13 Speculare axis ZG16 Rename of axes G17 XY plane selectionG18 XZ plane selectionG19 YZ plane selectionG21 Arc tangent to previous pathG23 Arc defined by three pointsG31 Feedrate modulation to keep the centrifugal acceleration limitG33 Thread cutting (for lathe)G36 Enable Continuous-Path mode (2D)G38 Tangential entry /exit of working pathG40 Tool radius compensation offG41 Left-hand tool radius compensationG42 Right-hand tool radius compensationG45 Tool compensation parameters configurationG49 Tool radius parametrization in alternative to T or D commandG50 Disable coordinate system rotationG51 Coordinate system rotationG52 Setting of local coordinate systemG53 Command in machine coordinate systemG59 Disable current originG54 Select Origin 1G55 Select Origin 2G56 Select Origin 3G57 Select Origin 4G58 Select Origin from TableG68 New Clamp position G69 Return Clamps to previous positionG70 Rotation of the headG71 Roto-translation of the working plane on the spaceG72 Disable Roto-translationG75 Disables Polar coordinate modeG76 Enables Polar coordinate mode (X = radius, Y/Z = angle)G77 Movement commands expressed in polar coordinates (X = final position, Y/Z = angle) G78 Movement commands expressed in polar coordinates (Y = final position, X/Z = angle) G79 Movement commands expressed in polar coordinates (Z = final position, X/Y = angle)G80 Disable Drilling, Tapping & Boring cyclesG81 Drilling cycle with pause for chip breakingG82 Drilling cycle with double sectionG83 Drilling cycle with intermittent cutting for chip breakingG84 TappingG85 Boring cycle type 1G86 Boring cycle type 2G88 Double drillingG90 Absolute programming modeG91 Incremental programming modeG94 Feed per minuteG95 Feed per rotationG96 Constant surface speed controlG97 Disable Constant surface speed control

Instruction Set short reference

Other G commands

G100 Displays a message during program executionG106 Execution of a 3D profile in several stepsG110 Multiple drilling through head with several toolsG133 Thread cutting for lathesG137 End of pocket executionG138 3D Tangential entry with pocket executionG139 3D pocket executionG140 Written executionG150 Slot diggingG152 Circular diggingG153 Drilling through helical interpolationG154 Cylindrical angular sector diggingG155 Internal or external rectangle digging type 1G158 Internal or external 3D circle digging G159 Internal or external rectangle digging type 2G174 Slot digging for lathesG177 Face milling of rectangular areaG178 Digging cycle for internal arc slotG179 Digging cycle for external arc slotG180 Drilling in rowG181 Drilling in circleG182 Drilling in grid

The information and pictures are subject to change. For complete and exaustive information please refer to the manuals

Flexible and customizable graphics

Application ISO VMC

The information and pictures are subject to change. For complete and exaustive information please refer to the manuals

Memory for programs and updates

CF

Step / Dir

+/- 10V

Interpolated Axes

Built in Digital / Analog I/O

RS232 / RS485

Digital/Analog I/O

Ethernet

Access to the controller internal Web server

WEB

Analog/Digital I/O

Interpolated Axes

Interpolated Axes

Interpolated Axes

Interpolated Axes

Analog/Digital I/O

High Connectivity & FlexibilitySuitable for different machinesCustomizable

Tex Computer srlVia Mercadante, 3547841 Cattolica (RN) ITALYTel. +39 (0)541 832511Fax +39 (0)541 832519E-mail: commerciale@texcomputer.com

Application ISO VMC

The information and pictures are subject to change. For complete and exaustive information please refer to the manuals