531
January 2011 Product Catalog Powerwave

Powerwave Product Catalog

Embed Size (px)

DESCRIPTION

Sorry, this document does not contain enough content to gain access to the download.To keep Scribd a valuable resource for everyone, we require that certain uploads meet a set of quality standards.Among other requirements, you should upload something that is not already on Scribd and that you have permission to use. The best way to make sure what you are uploading will meet our quality standards is to upload something you wrote yourself, which will always be accepted.

Citation preview

Page 1: Powerwave Product Catalog

January 2011

Product CatalogPower wave

Page 2: Powerwave Product Catalog

Table of Contents

POWERWAVE Table of Contents

PageBase Station Products

Power Amplifier Solutions MCPA Modules 6Single MCPA Outdoor Booster Systems 12Dual MCPA Outdoor Booster Systems 18Triple MCPA Outdoor Booster Systems 22

TMA Products Tower Mounted Amplifiers 27Power Distribution Units 55Current Injectors 58

Filters Same Band Combiners T1 64Diplexer/Crossband Combiners 66Triplexer/Crossband Combiners 68Duplexers 70Interference Filters 72

RMDU and Enclosure Solutions MicroFlex™ Outdoor Enclosures 76 RapidFlex™ Outdoor Enclosures 79 SubTerra™ Controlled Environment Vault 81 VersaFlex™ Shelter Solutions 83Coverage Products

Repeater Products Channel Selective Standard Repeaters 89Band Selective Compact Repeaters 113Band Selective Standard Repeaters 144Advanced Train Repeaters 157Digital Repeaters 162

In-Building and Outdoor DAS Products Public Safety Networks

Bi-Directional Amplifiers 167LinkNet™ Convergence Platform 170Optical and RF Conversion Modules 178Tap-In® Signal Distribution Taps 179Nexus™ FT – Public Safety 181

Commercial Wide Band Radio Heads 183Nexus FT Single and Dual Band 186Nexus FT Rack Mounts 221

Repeater Remote Management Products IP/SNMP/GPS Repeater Remote Management Interface 226

About Antenna Products 232Broadband Antennas Single Broadband Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz 236 Low Broadband Cross Polarized Antennas, 806-960 MHz 257 Low Broadband Cross Polarized Antennas, 698-894 MHz 290 Vertical Polarized ALP Broadband Vertical Polarized Antennas, 806-960 MHz 297 Dual Broadband Antennas Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz 299 Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz 307

1

Page 3: Powerwave Product Catalog

Table of Contents

POWERWAVE Table of Contents

Page Triple Broadband Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz 318Single and Dual Band Antennas Single Band Antennas Cross Polarized ALX Cross Polarized Antennas, 806-896 MHz 325 X-Urban Cross Polarized Antennas, 824-896/870-960 MHz 327 Vertical Polarized Omni Vertical Polarized Antennas, 806-896 MHz 347 Urban Vertical Polarized Antennas, 824-896/870-960 MHz 355 Dual Band Antennas Cross Polarized ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz 379 DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz 390 Vertical Polarized ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz 394iRET Low Broadband Cross Polarized iRET Antennas, 698-894MHz 408 Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz 415 Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 422 High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 448 High Broadband Cross Polarized iRET Antennas, 2300-2700MHz 452 Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 455 Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz 458 Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz 460iDiplexer Antennas Multi Broadband Cross Polarized Antennas 464Remote Electrical Tilt (RET) Single Band RET 473 Dual Band RET 482 Triple Band RET 485 iRET 8510 488 Master Control Unit 491 CILOC 498 RET System Cables 505Indoor Antennas Dual Band Indoor Antennas Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz 510 Multiband Indoor Antennas Vertical Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz 512Clean Site™ Solutions 515Mounting Solutions 517Antenna FAQ 523Network Management 524Part Number Index 526

2

Page 4: Powerwave Product Catalog

Base Station ProductsPower wave

Base Station ProductsA unique combination of capabilities sets Powerwave apart from other providers when it comes to rapidly delivering cost-efficient base station solutions to operators & OEMs.

Comprehensive RF/Digital CompetenciesOur engineering staff has expertise across all facets of RF and digital signal processing. Using all of these technological tools, we are able to create highly integrated base station solutions. Higher integration means fewer parts, optimum manufacturing efficiency and better value.

End-to-End System ProviderBecause Powerwave is a proven provider for all categories of wireless infrastructure solutions-from antenna products to base station products to coverage products-you rely on us as a single-source and consolidate/streamline your supply chain.

Power Amplifier Solutions

TMA Products

Filters

Page 5: Powerwave Product Catalog

Base Station Products

POWERWAVE Base Station Products

Power Amplifier Solutions Page

MCPA Modules 6 Single MCPA Outdoor Booster Systems 12 Dual MCPA Outdoor Booster Systems 18 Triple MCPA Outdoor Booster Systems 22

TMA Products Tower Mounted Amplifiers 27 Power Distribution Units 55 Current Injectors 58

Filters Same Band Combiners T1 64 Diplexer/Crossband Combiners 66 Triplexer/Crossband Combiners 68 Duplexers 70 Interference Filters 72

4

Page 6: Powerwave Product Catalog

Powerwave offers one of the industry’s largest and most diverse line of power amplifier systems for cellular, EGSM, DCS, PCS, AWS and UMTS wireless networks, with more than 350,000 MCPAs and SCPAs deployed worldwide. One key reason for this success is that we are able to rapidly roll out new solutions by leveraging the modular architecture of existing systems. Building upon field-proven components and technologies, our RF engineers are able to shorten design time and deliver systems with industry-leading density and efficiency that drive significant manufacturing, space and cost savings. This reduces both capital and operating expenses.

Power Amplifier SolutionsPower wave

MCPA Modules

Single MCPA Outdoor Booster Systems

Dual MCPA Outdoor Booster Systems

Triple MCPA Outdoor Booster Systems

Page 7: Powerwave Product Catalog

Base Station Products

POWERWAVE MCPA Modules

Power Amplifier Solutions MCPA Modules

Title Range (MHz) Air Interface Part Number Page

160W Multi-Carrier Power Amplifier 850 GSM/EDGE/CDMA2000/

WCDMA G3L-850-160 7

135W Multi-Carrier Power Amplifier 900 GSM/EDGE/CDMA2000/

WCDMA G3L-929-135 8

120W Multi-Carrier Power Amplifier 1800 GSM/EDGE/CDMA2000/

WCDMA G3L-1829-120 9

170W Multi-Carrier Power Amplifier 1900 GSM/EDGE/CDMA2000/

WCDMA G3L-1929-160 10

140W Multi-carrier Power Amplifier 2100 GSM/EDGE/CDMA2000/

WCDMA G3L-2129-140 11

6

Page 8: Powerwave Product Catalog

POWERWAVE Multi-Carrier Power Amplifiers

Connectors RF Input Sub-miniature Combo D connector for RF & Digital interfaces

Connectors RF Output N/A

Connectors Alarm Output N/A

Connectors DC Terminal Post N/A

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 355 x 99 x 450 (1’2”x4”x1’6”)

Weight(lbs) 24.3

Operating Humidity 0% to 80% (non condensing)

Storage Humidity 0% to 95% (non condensing)

Storage Temperature Range -40° to 70° C

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -33° C to 50° C

G3L-850-160 160W Multi-Carrier Power Amplifier

Gain Variation with Temperature +/-0.5 dB

Input Return Loss 16 dB (Max)

Nominal RF Gain (dB) 63 dB ± 0.5 dB

Gain Flatness ± 0.5 dB

DC Input Current Typical: 30.5A (GSM), 29 (CDMA)

Alarms and Protections Input over power, VSWR, DC failure, High temperature, Loop failure

Output Return Loss 16 dB (Max)

DC Input Voltage Range 26 to 28 Vdc (+21 to 30 Vdc Operational)

Harmonics Better than -13 dBm/ 1MHz

Frequency Range (MHz) 869-894

Instantaneous Bandwidth 25

ELECTRICAL SPECIFICATIONSBand (MHz) 850

RF Output Power 160W (Typical)

Intermodulation Distortion -65 dBc

Air Interface GSM/EDGE/CDMA2000/WCDMA

Efficiency 18%

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.7

Page 9: Powerwave Product Catalog

POWERWAVE Multi-Carrier Power Amplifiers

Connectors RF Input 21W4 Combo-D w/PkZ contact

Connectors RF Output 21W4 Combo-D w/PkZ contact

Connectors Alarm Output 21W4 combo-D

Connectors DC Terminal Post 21W4 Combo-D w/size 8 contact

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 355 x 99 x 450 (1’2”x4”x1’6”)

Weight(lbs) 20

Operating Humidity 5% to 95% non-condensing

Storage Humidity 5% ro 95% non-condensing

Storage Temperature Range -40 C to 70 C

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -33 C to 50 C

G3L-929-135 135W Multi-Carrier Power Amplifier

Gain Variation with Temperature ± 0.5 dB

Input Return Loss 14 dB (Max)

Nominal RF Gain (dB) 63 dB ± 0.5 dB

Gain Flatness ± 0.5 dB

DC Input Current 26A (nominal at rated power)

Alarms and Protections Input over drive, VSWR, DC failure, High temperature, Loop failure, APC

Output Return Loss 16 dB (Max)

DC Input Voltage Range 26 to 28 Vdc (21 to 30 Vdc Operational)

Harmonics Better than -13 dBm/1 MHz

Frequency Range (MHz) 925-960 MHz

Instantaneous Bandwidth 25 MHz

ELECTRICAL SPECIFICATIONSBand (MHz) 900

RF Output Power 135W (Typical)

Intermodulation Distortion -65 dBc (Typical)

Air Interface GSM/EDGE/CDMA2000/WCDMA

Efficiency 19%

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.8

Page 10: Powerwave Product Catalog

POWERWAVE Multi-Carrier Power Amplifiers

Connectors RF Input 21W4 Combo-D w/PkZ contact

Connectors RF Output 21W4 Combo-D w/PkZ contact

Connectors Alarm Output 21W4 Combo-D

Connectors DC Terminal Post 21W4 Combo-D w/size 8 contact

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 355 x 99 x 450 (1’2”x4”x1’6”)

Weight(lbs) 23

Operating Humidity 5% to 95% (non condensing)

Storage Humidity 5% to 95% (non condensing)

Storage Temperature Range -40° to 70° C

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -33° C to 50° C

G3L-1829-120 120W Multi-Carrier Power Amplifier

Gain Variation with Temperature +/-0.5 dB

Input Return Loss 17 dB (Max)

Nominal RF Gain (dB) 63 dB +/- 0.5

Gain Flatness +/-0.3 dB

DC Input Current Typical: 33A (GSM), 31A (CDMA)

Alarms and Protections Input over drive, VSWR, DC failure, High temperature, Loop failure, APC

Output Return Loss 18 dB (Max)

DC Input Voltage Range 26 to 30 /Vdc (22 to 30 Vdc Operational)

Harmonics Better than -13 dBm/ 1MHz

Frequency Range (MHz) 1805-1880

Instantaneous Bandwidth 35

ELECTRICAL SPECIFICATIONSBand (MHz) 1800

RF Output Power Typical: 120W

Intermodulation Distortion -65 dBc (Typical)

Air Interface GSM/EDGE/CDMA2000/WCDMA

Efficiency 13.4% (GSM)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.9

Page 11: Powerwave Product Catalog

POWERWAVE Multi-Carrier Power Amplifiers

Connectors RF Input Sub-miniature Combo D connector for RF & Digital interfaces

Connectors RF Output N/A

Connectors Alarm Output N/A

Connectors DC Terminal Post N/A

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 355 x 99 x 450 (1’2”x4”x1’6”)

Weight(lbs) 26.4

Operating Humidity 0% to 80% (non condensing)

Storage Humidity 0% to 95% (non condensing)

Storage Temperature Range -40° to 70° C

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -33° C to 50° C

G3L-1929-160 170W Multi-Carrier Power Amplifier

Gain Variation with Temperature +/-0.5 dB

Input Return Loss 16 dB (Max)

Nominal RF Gain (dB) 63 dB ± 0.5 dB

Gain Flatness ± 0.5 dB

DC Input Current 34A@170W, 33A@160W

Alarms and Protections Input over power, VSWR, DC failure, High temperature, Loop failure

Output Return Loss 16 dB (Max)

DC Input Voltage Range 26 to 28 Vdc (+21 to 30 Vdc Operational)

Harmonics Better than -13 dBm/ 1MHz

Frequency Range (MHz) 1930-1995

Instantaneous Bandwidth Up to 65

ELECTRICAL SPECIFICATIONSBand (MHz) PCS

RF Output Power 170 Watts (Typical)

Intermodulation Distortion -65 dBc

Air Interface GSM/EDGE/CDMA2000/WCDMA

Efficiency 18.5%

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.10

Page 12: Powerwave Product Catalog

POWERWAVE Multi-Carrier Power Amplifiers

Connectors RF Input 21W4 Combo-D w/PkZ contact

Connectors RF Output 21W4 Combo-D w/PkZ contact

Connectors Alarm Output 21W4 Combo-D

Connectors DC Terminal Post 21W4 Combo-D w/size 8 contact

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 355 x 99 x 500 (incl handles) (13.96” H X 3.9” W X 19.7” D)

Weight(lbs) 28.5

Operating Humidity 5% to 90% (non condensing)

Storage Humidity 5% to 90% (non condensing)

Storage Temperature Range -40° to +85° C

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20° C to +50° C

G3L-2129-140 140W Multi-carrier Power Amplifier

Gain Variation with Temperature +/-0.5 dB

Input Return Loss 14

Nominal RF Gain (dB) 63 dB

Gain Flatness +/-0.5 dB

DC Input Current 34.5A (Nominal, at 27V, 140W output)

Alarms and Protections Input over drive, VSWR, DC failure, High temperature, Loop failure

Output Return Loss 16

DC Input Voltage Range +26 to +28 Vdc Nominal (+21 to +30 Operational)

Harmonics -13 dBm (Max.) 1 MHz Bandwidth; -50 dBc (Max.)

Frequency Range (MHz) 2110-2170

Instantaneous Bandwidth 60 MHz

ELECTRICAL SPECIFICATIONSBand (MHz) 2100

RF Output Power 140W

Intermodulation Distortion Spurious Emissions - 3GPP TS25.141 Air interface compliant.

Air Interface CDMA2000/WCDMA/LTE

Efficiency > 15% (45 MHz IBW), >14% (60 MHz IBW)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.11

Page 13: Powerwave Product Catalog

Base Station Products

POWERWAVE Single MCPA Outdoor Booster Systems

Power Amplifier Solutions Single MCPA Outdoor Booster Systems

Title Range (MHz) Air Interface Part Number Page

OS-1 Outdoor System 800 GSM/EDGE/CDMA2000/ WCDMA OS-0851-P0-XXX 13

OS-1 Outdoor System 900 GSM/EDGE/CDMA2000/ WCDMA OS-0951-P0-XXX 14

OS-1 Outdoor System 1800 GSM/EDGE/CDMA2000/ WCDMA OS-1851-H0-XXX 15

OS-1 Outdoor System 1900 GSM/EDGE/CDMA2000/ WCDMA OS-1951-E0-XXX 16

OS-1 Outdoor System 2100 GSM/EDGE/CDMA2000/ WCDMA OS-2151-E0-XXX 17

12

Page 14: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0 to +13.0 variable (-003 version)

Input Intercept Point IIP3 (dBm) +12 min (-003 Version)

Supply Voltage 180-264 VAC or +27VDC

Noise Figure (dB) 2.5 @ max gain, 3.0 @ min gain* (-003 version)

Tx Rejection In Rx Band (dB) 100 min

Impedance All Ports (Ohms) 50

Misc.

VSWR Alarm Threshold (dB) 7.0 (+/- 2 dB) (-003 version)

Return Loss, All Ports (dB) 15 min

Frequency (MHz) Down Link 869-894

Frequency (MHz) Up Link 824-849

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE/CDMA/WCDMA

System Output Power 120**

Tx Gain Range (dB) 0 to +20

Rx Path Insertion Loss 2.5* (-000 version)

IMD Specification -65* dBc

Instantaneous Bandwidth (MHz) 25

RF Connectors 7/16 DIN female X 6

Number of MCPAs per Sector 1

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228 X 660 X 660 (9”x 2’2 x 2’2”)

Weight(lbs) 102

Ingress Protection Class IP54

Lightning Protection 20kA EIC 61000-4-5, 8/20us waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 C to +50 C

OS-0851-P0-XXX OS-1 Outdoor System

* Typical Performance. ** Typical, with G3L-850-160 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

OS-0851-P0-000 Enclosure -TMA model 1

OS-0851-P0-003Enclosure - LNA model with VSWR monitor 1

MCPA Modules:

Model Number Description Quantity

930-00018-009 (optional) 3 KW Rectifier 1

Choose one of the following Enclosures:

G3L-850-160 160W MCPA Module 1

Updated: 2010-08-26 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

13

Page 15: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0 to +14.0 variable (-100 model)

Input Intercept Point IIP3 (dBm) > 0 dBm

Supply Voltage 94-264 VAC (Single Phase) or +27VDC

Noise Figure (dB) 2.5* @ max. gain, 3.5* @ min. gain (-103 version)

Tx Rejection In Rx Band (dB) 100 min.

Impedance All Ports (Ohms) 50

Misc.Optional modem for remote monitoring. Local configurability and alarm status through USB or Ethernet interface. Remote access through DHCP client via rear Ethernet port.

VSWR Alarm Threshold (dB) 0-10 dB output RL

Return Loss, All Ports (dB) 14 min.

Frequency (MHz) Down Link 925-960

Frequency (MHz) Up Link 880-915

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE

System Output Power 100 Watts**

Tx Gain Range (dB) 0 to +20.0 variable

Rx Path Insertion Loss 2 dB* (-100 model)

IMD Specification Spurious Emissions - 3GPP TS45.005 & TS25.141 Air Interface Compliant

Instantaneous Bandwidth (MHz) 35

RF Connectors 7/16 DIN Female X 4

Number of MCPAs per Sector 1

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 620 X 284 X 716 (24.4”x 11.18” x 28.18”)

Weight(lbs) 50 Kg (110 lbs)

Ingress Protection Class IP54

Lightning Protection 40kA per line, 8/20 us waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -30 to +50

OS-0951-P0-XXX OS-1 Outdoor System

* Typical Performance. ** Typical, with G3L-929-135 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

OS-0951-P0-1041 sector, with LNA, includes rectifier and modem 1

OS-0951-P0-103 1 sector, with LNA, includes rectifier 1

Model Number Description Quantity

Choose one enclosure:

G3L-929-135 135W MCPA Module 1

Amplifier Module:

Updated: 2010-07-20 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

14

Page 16: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0 to +13.0 variable (-003 version)

Input Intercept Point IIP3 (dBm) +12 min.

Supply Voltage 94-264 VAC (Single Phase, 47-63Hz) or +27VDC

Noise Figure (dB) 2.3* @ max. Gain, 1.89* @ min. Gain

Tx Rejection In Rx Band (dB) 100 min.

Impedance All Ports (Ohms) 50

Misc.

VSWR Alarm Threshold (dB)

Return Loss, All Ports (dB) 15 min.

Frequency (MHz) Down Link 1805-1880

Frequency (MHz) Up Link 1710-1785

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE/CDMA/WCDMA

System Output Power 90** Watts

Tx Gain Range (dB) 0 to +14

Rx Path Insertion Loss 2dB* (-000 version)

IMD Specification -65* dBc

Instantaneous Bandwidth (MHz) 45

RF Connectors 7/16 DIN Female X 6

Number of MCPAs per Sector 1

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 610 X 284 X 716 (24”x 11” x 28”)

Weight(lbs) 102

Ingress Protection Class IP54

Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 C to +50 C

OS-1851-H0-XXX OS-1 Outdoor System

* Typical Performance. ** Typical, with G3L-1829-120 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

1

Model Number Description Quantity

G3L-1829-120 120W MCPA module 1

OS-1851-H0-003Enclosure - LNA model - includes VSWR monitor, lightning arrestors 1

Choose one of:

OS-1851-H0-000 Enclosure - TMA model - DC transparency 1

Updated: 2010-06-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

15

Page 17: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0 to +14 dB (all models except -100)

Input Intercept Point IIP3 (dBm) > 0 dBm

Supply Voltage 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC

Noise Figure (dB) 2.5 dB max (all models except -100)

Tx Rejection In Rx Band (dB) 100 dB min

Impedance All Ports (Ohms) 50

Misc.Optional modem for remote monitoring. Local configurability and alarm status through USB or Ethernet interface. Remote access through DHCP client via rear Ethernet port.

VSWR Alarm Threshold (dB) 0-10 dB output RL

Return Loss, All Ports (dB) 14 dB min

Frequency (MHz) Down Link 1930-1990

Frequency (MHz) Up Link 1850-1910

ELECTRICAL SPECIFICATIONSAir Interface GSM, EDGE,CDMA,WCDMA

System Output Power 125** Watts

Tx Gain Range (dB) 0 to +20 variable

Rx Path Insertion Loss 2 dB (-100 series)

IMD Specification -65 dBc

Instantaneous Bandwidth (MHz) 65

RF Connectors 7/16 DIN Female X 6

Number of MCPAs per Sector 1

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 620 X 284 X 716 (24.4”x 11.18” x 28.18”)

Weight(lbs) 110 (50 Kg)

Ingress Protection Class IP54

Lightning Protection 40 KA per line, 8/20 us WF

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -30 C to +50 C

OS-1951-E0-XXX OS-1 Outdoor System

* Typical Performance** Typical, with G3L-1929-160 inserted, 45 MHz IBWAll specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

G3L-1929-160 amplifier module 1

OS-1951-E0-102 enclosure 1

Alternatively, select a Kit:

INST-OS-1951-103 Kit includes:

OS-1951-E0-102 1 sector, with LNA, includes rectifier 1

Model Number Description Quantity

Enclosures (Select one):

G3L-1929-160 160W 1900 MHz MCPA 1

MCPA Module

Updated: 2010-07-20 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

16

Page 18: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0 to +14 dB adjustable (-101,-401 models)

Input Intercept Point IIP3 (dBm) >0 dBm

Supply Voltage 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC

Noise Figure (dB) 2.5 dB max (-101,-401 models)

Tx Rejection In Rx Band (dB) 100dB min.

Impedance All Ports (Ohms) 50

Misc.Optional modem for remote monitoring, local configurability and alarm status through USB or Ethernet interface. Remote access through DHCP client via Rear Ethernet port.

VSWR Alarm Threshold (dB) 0-10 dB output RL (selectable)

Return Loss, All Ports (dB) 14 dB min.

Frequency (MHz) Down Link 2110-2155 (AWS, -4XX series), 2110-2170 (UMTS, -1XX series)

Frequency (MHz) Up Link 1710-1755 (AWS, -4XX series), 1920-1980 (UMTS, -1XX series)

ELECTRICAL SPECIFICATIONSAir Interface GSM,EDGE,CDMA,WCDMA

System Output Power 100W**

Tx Gain Range (dB) 0 to +20 variable

Rx Path Insertion Loss 2 dB (-100,-400 models)

IMD Specification Spurious Emissions - 3GPP TS25.141 Air interface compliant.

Instantaneous Bandwidth (MHz) 45 (AWS, -4XX series) 60 (UMTS,-1XX series)

RF Connectors 7/16 DIN Female X 4

Number of MCPAs per Sector 1

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 620 X 284 X 716 (24.4”x 11.18” x 28.18”)

Weight(lbs) 110 (50 Kg)

Ingress Protection Class IP54

Lightning Protection 40kA per line, 8/20 us WF

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -30 C to +50 C

OS-2151-E0-XXX OS-1 Outdoor System

** Typical, with G3L-2129-140 MCPA Module InsertedAll specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

G3L-2129-140 140W MCPA module 1

OS-2151-E0-101LNA model - UMTS (Band Class 1) w/rectifier 1

Model Number Description Quantity

Enclosures (select one)

OS-2151-E0-404LNA model - AWS (Band Class 4) w/rectifier and modem 1

MCPA Module:

OS-2151-E0-104LNA model - UMTS (Band Class 1) w/rectifier and modem 1

OS-2151-E0-401LNA model - AWS (Band Class 4) w/rectifier 1

Updated: 2010-07-20 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

17

Page 19: Powerwave Product Catalog

Base Station Products

POWERWAVE Dual MCPA Outdoor Booster Systems

Power Amplifier Solutions Dual MCPA Outdoor Booster Systems

Title Range (MHz) Air Interface Part Number Page

OS-2 Outdoor System 900 GSM/EDGE/CDMA2000/ WCDMA OS-0921-V0-XXX 19

OS-2 Outdoor System 1800 GSM/EDGE/CDMA2000/ WCDMA OS-1821-H0-XXX 20

OS-2 Outdoor System 1900 GSM/EDGE/CDMA2000/ WCDMA OS-1921-H0-XXX 21

18

Page 20: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0 to +11.0 variable (-001 and -003 variants)

Input Intercept Point IIP3 (dBm) +12 min.

Supply Voltage 180-264 VAC, 47-63 Hz Single Phase, or +27VDC

Noise Figure (dB) 2.5* @ max. Gain, 3.5* @ min. Gain (-001 and -003 variants)

Tx Rejection In Rx Band (dB) 90 min.

Impedance All Ports (Ohms) 50

Misc.

VSWR Alarm Threshold (dB) 9.5 (+/-2dB) (-003 variant)

Return Loss, All Ports (dB) 14 min.

Frequency (MHz) Down Link 925-960

Frequency (MHz) Up Link 880-915

ELECTRICAL SPECIFICATIONSAir Interface EGSM/EDGE

System Output Power 180** Watts

Tx Gain Range (dB) 1 MCPA Module 0 to 17.5, 2 MCPA Module 0 to 20.5

Rx Path Insertion Loss 2dB*(-000 variant), 0.5dB*dB (bypass mode)

IMD Specification -65* dBc

Instantaneous Bandwidth (MHz) 25

RF Connectors 7/16 DIN Female X 4

Number of MCPAs per Sector 1 or 2

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 407 x 865 x 840 (1’4”x 2’10”x 2’9”)

Weight(lbs) 151-183

Ingress Protection Class IP54

Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 to +50

OS-0921-V0-XXX OS-2 Outdoor System

* Typical ** Typical, with two G3L-929-135 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

1001308 Rectifier 2-3

Model Number Description Quantity

G3L-929-135 135W MCPA module 1-2

OS-0921-V0-011 Enclosure - LNA model 1

OS-0921-V0-013Enclosure - LNA model with VSWR monitor 1

Choose one of the following Enclosures:

OS-0921-V0-010Enclosure - TMA model - 12V supply to TMA 1

Updated: 2010-06-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

19

Page 21: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0 to +12.0 variable (-001 version)

Input Intercept Point IIP3 (dBm) +12dBm min.

Supply Voltage 180-264 VAC, 47-63 Hz Single Phase, or +27VDC

Noise Figure (dB) 2.5* @ max. Gain, 3.5* @ min. Gain (-001 version)

Tx Rejection In Rx Band (dB) 100 min.

Impedance All Ports (Ohms) 50

Misc. N/A

VSWR Alarm Threshold (dB) N/A

Return Loss, All Ports (dB) 14 min

Frequency (MHz) Down Link 1805-1880

Frequency (MHz) Up Link 1710-1785

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE

System Output Power 160** Watts

Tx Gain Range (dB) 1 MCPA Module 0 to +12, 2 MCPA Module 0 to +15

Rx Path Insertion Loss 2.5dB*, 0.5dB* (bypass)

IMD Specification -65* dBc

Instantaneous Bandwidth (MHz) 35

RF Connectors 7/16 DIN Female X 4

Number of MCPAs per Sector 2

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 407 x 865 x 840 (1’4”x 2’10”x 2’9”)

Weight(lbs) 151-183

Ingress Protection Class IP54

Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 C to +50 C

OS-1821-H0-XXX OS-2 Outdoor System

* Typical ** Typical, with two G3L-1829-120 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

1001308 AC Rectifier 2-3

Model Number Description Quantity

G3L-1829-120 120W MCPA Module 1-2

OS-1821-H0-005 LNA Model 1

Choose one of the following Enclosures:OS-1821-H0-004 TMA Model - 12VDC supply to TMA 1

Updated: 2010-06-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

20

Page 22: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range N/A

Input Intercept Point IIP3 (dBm) N/A

Supply Voltage 180-264 VAC, 47-63 Hz Single Phase, or +27VDC

Noise Figure (dB) N/A

Tx Rejection In Rx Band (dB) 100 dB min

Impedance All Ports (Ohms) 50

Misc.

VSWR Alarm Threshold (dB) N/A

Return Loss, All Ports (dB) 14dB min.

Frequency (MHz) Down Link 1930-1990

Frequency (MHz) Up Link 1850-1910

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE/CDMA/WCDMA

System Output Power 160** Watts

Tx Gain Range (dB) 1 MCPA Module 0 to +12, 2 MCPA Modules 0 to +15

Rx Path Insertion Loss 2.5*

IMD Specification -65* dBc

Instantaneous Bandwidth (MHz) 45/60

RF Connectors 7/16 DIN Female X 8

Number of MCPAs per Sector 2

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 407 x 863 x 838 (16”x 34”x 33”)

Weight(lbs) 151-183

Ingress Protection Class IP54

Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 C to +50 C

OS-1921-H0-XXX OS-2 Outdoor System

* Typical ** Typical, output power at antenna port with 2 G3L-1929-120 modules installed, 45 MHz IBW. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

OS-1921-H0-000Enclosure - TMA model - DC transparency or TMA bias Function 1

(configurable)

Model Number Description Quantity

930-00018-009 3 KW rectifier 1-2

Compatible with MCPA Module:G3L-1929-120 120W MCPA module 1-2

Updated: 2010-06-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

21

Page 23: Powerwave Product Catalog

Base Station Products

POWERWAVE Triple MCPA Outdoor Booster Systems

Power Amplifier Solutions Triple MCPA Outdoor Booster Systems

Title Range (MHz) Air Interface Part Number Page

OS-3 3 Sector Outdoor System 1900 GSM/EDGE/CDMA2000/

WCDMA OS-1933-E0-XXX 23

OS-3 Outdoor System 1900 GSM/EDGE/CDMA2000/ WCDMA OS-1991-H0-XXX 24

OS-3 3 Sector Outdoor System 2100 GSM/EDGE/CDMA2000/

WCDMA OS-2133-E0-XXX 25

22

Page 24: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0-12 dB

Input Intercept Point IIP3 (dBm) 0.0

Supply Voltage 180-264 VAC, -48VDC (-103 model)

Noise Figure (dB) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)*

Tx Rejection In Rx Band (dB) 100

Impedance All Ports (Ohms) 50

Misc.

VSWR Alarm Threshold (dB) Adjustable

Return Loss, All Ports (dB) 14

Rx Path Insertion Loss 0.5dB* (RF Bypass Mode)

Frequency (MHz) Down Link 1930-1995

Frequency (MHz) Up Link 1850-1915

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE/CDMA2000/WCDMA

System Output Power - GSM/EDGE/WCDMA 150 W*

Instantaneous Bandwidth (MHz) 65 (with G3L-1929-160 module)Tx Gain Range (dB) 0-17 Variable

System Output Power - CDMA/CDMA 2000 150 W**

IMD Specification -65 dBc*

RF Connectors 7/16 DIN-F, N-F

Number of MCPAs per Sector 1

Number of Sectors 3

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 16” W x 40” H x 38” D

Weight(lbs) 385 (175 kg)

Ingress Protection Class IP55

Lightning Protection 20kA EIC 61000-4-5, 8/20 uS Waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 °C to +50 °C

OS-1933-E0-XXX OS-3 3 Sector Outdoor System

* Typical Performance** Typical Performance with G3L-1929-160-001 MCPA Module Inserted, specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

220VAC Rectifiers 2

INST-1933-E0-001 1 Sector Upgrade Kit

G3L-1929-160 module 1

RF Conditioning Unit (RFCU) 1

RF Conditioning Unit (RFCU) 1

220VAC Rectifier 1

Includes:

G3L-1929-160 module 1

G3L-1929-160 modules 3

RF Conditioning Units (RFCU) 3

Model Number Description Quantity

OS-1933-E0-003OS-3, 1900 MHz, Trident 3 Sector, 3I/3O Includes: 1

Includes four -48VDC rectifiers instead of 220VAC rectifiers

OS-1933-E0-001OS-3, 1900 MHz, Trident 1 Sector, 3I/3O Includes: 1

220VAC Rectifiers 4

OS-1933-E0-103 -48VDC version of OS-1933-E0-003

Updated: 2010-12-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

23

Page 25: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0-12 dB in 1 dB increments (-004 version only)

Input Intercept Point IIP3 (dBm) 0.0 (-004 version only)

Supply Voltage -36 to -60VDC (-103 version), 180-264VAC (-003,-004 versions),+26-28VDC (-200 version)

Noise Figure (dB) 2.5 at max Rx gain (-004 version)

Tx Rejection In Rx Band (dB) 100 min

Impedance All Ports (Ohms) 50

Misc.Remotely configurable via web GUI, accessible via Ethernet interface. TMA bias support through PDU functionality. DC bypass configurability on -004 version.

VSWR Alarm Threshold (dB) N/A

Return Loss, All Ports (dB) 14 min.

Frequency (MHz) Down Link 1930-1995

Frequency (MHz) Up Link 1850-1915

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE/CDMA2000/WCDMA

System Output Power 335** Watts

Tx Gain Range (dB) duplex/simplex: 3 MCPA’s: 0.0 to +16.2/17.0, 2 MCPA’s: 0 to 14.4/15.2, 1 MCPA: 0 to +11.4/12.2

Rx Path Insertion Loss 3.0 max (-003, -103, -200 versions)

IMD Specification -65* dBc

Instantaneous Bandwidth (MHz) 45/65

RF Connectors 7/16 DIN Female

Number of MCPAs per Sector 3

Number of Sectors 1

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 405 x 774 x 864 (1’4”x 2’6”x 2’10”)

Weight(lbs) 255 lbs, fully populated, with 3 MCPA modules

Ingress Protection Class IP55

Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 C to +50 C

OS-1991-H0-XXX OS-3 Outdoor System

* Typical performance**Typical, with 3 G3L-1929-160 modules, 45 MHz IBW.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

ORDERING INFORMATION

OS-1991-H0-200 +27 VDC Enclosure - TMA model 1

G3L-1929-160 160W MCPA module 1-3

G3L-1929-120 120W MCPA module 1-3

Model Number Description Quantity

Choose one of:

OS-1991-H0-004220 VAC Enclosure - LNA with DC bypass option for TMA bias 1

OS-1991-H0-103 -48 VDC Enclosure - TMA model 1

Choose one of:

OS-1991-H0-003 220 VAC Enclosure - TMA model 1

Updated: 2010-12-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

24

Page 26: Powerwave Product Catalog

POWERWAVE Outdoor Booster Systems

Rx Gain Range 0-12 dB

Input Intercept Point IIP3 (dBm) 0.0

Supply Voltage 180-264 VAC (-0XX series), -48VDC (-1XX series)

Noise Figure (dB) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)

Tx Rejection In Rx Band (dB) 100

Impedance All Ports (Ohms) 50

Misc. Enclosure is multiband capable (any mix of 1900, 2100 MHz)

VSWR Alarm Threshold (dB) adjustable

Return Loss, All Ports (dB) 14

Rx Path Insertion Loss 0.5dB* (RF Bypass Mode)

Frequency (MHz) Down Link 2110-2170 (UMTS, -X1X series), 2110-2155 (AWS, -X4X series)

Frequency (MHz) Up Link 1920-1980 (UMTS, -X1X series), 1710-1755 (AWS, -X4X series)

ELECTRICAL SPECIFICATIONSAir Interface GSM/EDGE/CDMA2000/WCDMA

System Output Power - GSM/EDGE/WCDMA 105W**

Instantaneous Bandwidth (MHz) 60 (UMTS, -X1X series) 45 (AWS, -X4X series)Tx Gain Range (dB) 0-17 Variable

System Output Power - CDMA/CDMA 2000 105W**

IMD Specification -65 dBc*

RF Connectors 7/16 DIN-F, N-F

Number of MCPAs per Sector 1

Number of Sectors 3

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 16” W x 40” H x 38” D

Weight(lbs) 385 (175 kg)

Ingress Protection Class IP55

Lightning Protection 20kA EIC 61000-4-5, 8/20

ENVIRONMENTAL SPECIFICATIONSOperating Temperature Range -20 °C to +50 °C

OS-2133-E0-XXX OS-3 3 Sector Outdoor System (Preliminary)

* Typical Performance** Typical, with G3L-2130-140 MCPA Module Inserted, 45 MHz IBW

ORDERING INFORMATION

Incl: G3L-2129-140 amplifier module 1

AWS RF Conditioning Unit 1

220 VAC Rectifiers (AC enclosures only) 4

OS-2133-E0-041 Enclosure: 3I3O, AWS (Band 4), 220 VAC 1

AWS RF Conditioning Unit 1

220 VAC Rectifier 1

220VAC Rectifiers 2

INST-2133-E0-041AWS Upgrade Kit, includes: G3L-2129-140 amplifier module 1

OS-2133-E0-043 Enclosure: 3I3O, AWS (Band 4),220 VAC 1

OS-2133-E0-113 Enclosure: 3I3O, UMTS (Band ),-48 VDC 1

Model Number Description Quantity

OS-2133-E0-013 Enclosure: 3I3O, UMTS (Band 1),220 VAC 1

G3L-2129-140 amplifier modules 3

Frequency-specific RF Conditioning Units 3

OS-2133-E0-143 Enclosure: 3I3O, AWS (Band 4),-48VDC 1

Models above include:

Updated: 2010-12-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

25

Page 27: Powerwave Product Catalog

Tower Mounted AmplifiersPowerwave offers one of the most extensive tower mounted amplifier (TMA) product portfolios, including single, twin and dual band TMAs. Our TMA design offers a low noise amplifier design that provides superior receive system performance and reliability. Powerwave TMAs are designed for the harshest environments to include desert and polar climates and extreme environments such as rain forests. Powerwave TMAs are also part of the Powerwave Clean Site™ Solutions which provides multiple benefits such as reduced installation cost, reuse of existing building permits and reduced visual impact to base stations.

TMA ProductsPower wave

Tower Mounted Amplifiers

Power Distribution Units

Current Injectors

Page 28: Powerwave Product Catalog

Base Station Products

POWERWAVE Tower Mounted Amplifiers

TMA Products Tower Mounted Amplifiers

TMA Type Up-Link (MHz) Down-Link (MHz) Part Number Page

TMA Twin 800 AISG 824-849 869-894 24501, 24511 29

TMA-DD Twin 2100 15 MHz 1969.7-1984.7 2110-2170 010-11177-0214 30

TMA-DD Twin 2100 15 MHz 1920.5-1935.5 2110-2170 010-11182-02nn 31

TMA-DD Twin 2100 15 MHz 1964.9-1979.9 2110-2170 010-11183-02nn 32

TMA-DD Twin 2100 15 MHz 1950-1965 2110-2170 010-50025-0232 33

TMA Twin 900 AISG 890-915 935-960 25001, 25011 34

TMA Twin 900 AISG 880-908 925-953 25002, 25012 35

TMA Twin 900 AISG 890-915 935-960 25014, 25016 36

TMA Single 900 AISG 890-915 935-960 25101, 25111 37

TMA Single 900 AISG 890-915 935-960 25102, 25112 38

TMA Single 900 AISG 890-915 935-960 25103, 25113 39

TMA-DD EGSM 880-915 925-960 LGP192nn 40

TMA-DD 850 MHz SMR Rejection 824-849 869-894 LGP174nn 41

TMA-DD 1900 1850-1910 1930-1990 LGP175nn 42

TMA-DD 1800 Twin AISG 2.0 1710-1785 1805-1880 LGP18520, LGP18521 43

TMA-DD 1800 Twin AISG 2.0 1710-1785 1805-1880 LGP185nn 44

TMA-DD 1900 Twin 1850-1910 1930-1990 LGP186nn 45

27

Page 29: Powerwave Product Catalog

Base Station Products

POWERWAVE Tower Mounted Amplifiers

TMA Products Tower Mounted Amplifiers

TMA Type Up-Link (MHz) Down-Link (MHz) Part Number Page TMA-DD Micro Twin 2100 1920-1980 2110-2170 LGP215nn 46

TMA Dual Band AWS with 700 Bypass

1710-1770 with 698-746 bypass

2110-2170 with 698-746 bypass TSAW-07BP111-001 47

TMA Twin Dual Band AWS with 700 Bypass

1710-1770 with 698-746 bypass

2110-2170 with 698-746 bypass TTAW-07BP111-001 48

TMA Micro Twin AWS 1710-1755 2110-2155 TTAW-0000112-001 49

TMA Micro Twin AWS 1710-1770 2110-2170 TTAW-60BW111-001 50

TMA Dual Band 700/AWS

698-716 MHz and 1710-1770 MHz

728-746 and 2110-2170 TS07-AWDB111-001 51

TMA Twin 850/1900 Dual Band 824-849 /1850-1910 869-894 /1930-1990 TT08-19DB111-001 52

TMA Twin 1900 with 850 Bypass

1850-1910 with 824-894 bypass

1930-1990 with 824-894 bypass TT19-08BP111-001 53

ACTIVE UGC 900 890-915 935-960 TU09-000001n-001 54

28

Page 30: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4, Typical

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 869-894

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility

24501 AISG 1.1 (Field upgradable to AISG 2.0); 24511 AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption @12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 824-849

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.0 dB, Typical

UL Max Input Power (dBm) +10 dBm

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228x169x120 (9”x6.7”x4.8”)

Weight(lbs) <6 kg (13.2 lbs)

EMC ETS 300 342-3

Safety EN60950, UL 1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-1

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

24501, 24511 TMA Twin 800 12 dB SL AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2010-02-04 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

29

Page 31: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) Max 0.4

Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)

DL Frequency Range (MHz) 2110-2170

DL Return Loss > 18 dB

Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15

Power Handling, RMS 52 dBm CW; 62 dBm peakAISG Compatibility

2.0

Alarm Functionality Alarm Current: 250 mA

Power Consumption Typical 1.3W per TMA (2.5 W Total)

UL Rejection 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1969.7-1984.7

UL Return Loss > 18 dB

UL Bypass Loss(dB) <1.8 Typical. 3.7 Max

UL Max Input Power (dBm) +10

UL Noise Figure Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point(dBm) > +23

Colors Off white (NCS 1502-R)

RF Connectors 7/16 Female

Mounting Kit Hose Clamps Included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)

Weight(lbs) <4.5 Kg (9.9)

EMC ETS 125 113

Safety EN 60950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP 68

MTBF >350.000 Hours

Storage ETS 300 019-1-1

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

010-11177-0214 Tower Mounted Amplifier

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-05-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

30

Page 32: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) Max 0.4

Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)

DL Frequency Range (MHz) 2110-2170

DL Return Loss > 18 dB

Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15

Power Handling, RMS 52 dBm CW; 62 dBm peakAISG Compatibility

2.0

Alarm Functionality Alarm Current -0202: 250 mA

Power Consumption Typical 1.3W per TMA (2.5 W Total)

UL Rejection 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1920.5-1935.5

UL Return Loss > 18 dB

UL Bypass Loss(dB) <1.8 Typical. 3.7 Max

UL Max Input Power (dBm) +10

UL Noise Figure Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point(dBm) > +23

Colors Off white (NCS 1502-R)

RF Connectors 7/16 Female

Mounting Kit Hose Clamps Included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)

Weight(lbs) <4.5 Kg (9.9)

EMC ETS 125 113

Safety EN 60950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP68

MTBF >350.000 Hours

Storage ETS 300 019-1-11

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

010-11182-02nn Tower Mounted Amplifier

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-05-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

31

Page 33: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) Max 0.4

Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)

DL Frequency Range (MHz) 2110-2170

DL Return Loss > 18 dB

Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15

Power Handling, RMS 52 dBm CW; 62 dBm peakAISG Compatibility

2.0

Alarm Functionality Alarm Current -0202: 250 mA; -0232: 180 mA

Power Consumption Typical 1.3W per TMA (2.5 W Total)

UL Rejection 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1964.9-1979.9

UL Return Loss > 18 dB

UL Bypass Loss(dB) <1.8 Typical. 3.7 Max

UL Max Input Power (dBm) +10

UL Noise Figure Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point(dBm) > +23

Colors Off white (NCS 1502-R)

RF Connectors 7/16 Female

Mounting Kit Hose Clamps Included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)

Weight(lbs) <4.5 Kg (9.9)

EMC ETS 125 113

Safety EN 60950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP68

MTBF >350.000 Hours

Storage ETS 300 019-1-1

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

010-11183-02nn Tower Mounted Amplifier

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-09-21 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

32

Page 34: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) Max 0.4

Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm

DL Frequency Range (MHz) 2110-2170

DL Return Loss > 18 dB

Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15

Power Handling, RMS 52 dBm CW; 62 dBm peakAISG Compatibility

2.0

Alarm Functionality Alarm Current: 180 mA

Power Consumption Typical 1.3W per TMA (2.5 W Total)

UL Rejection 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1950-1965

UL Return Loss > 18 dB

UL Bypass Loss(dB) <1.8 Typical. 3.7 Max

UL Max Input Power (dBm) +10

UL Noise Figure Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point(dBm) > +23

Colors Off white (NCS 1502-R)

RF Connectors 7/16 Female

Mounting Kit Hose Clamps Included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)

Weight(lbs) <4.5 Kg (9.9)

EMC ETS 125 113

Safety EN 60950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP 68

MTBF >350.000 Hours

Storage ETS 300 019-1-1

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

010-50025-0232 Tower Mounted Amplifier

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-09-21 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

33

Page 35: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4, Typical

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 935-960

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility

25001 AISG1.1 (Field upgradable to AISG 2.0); 25011 AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption @12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 890-915

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.0 dB, Typical

UL Max Input Power (dBm) +10 dBm

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228x169x120 (9”x6.7”x4.8”)

Weight(lbs) <6 kg (13.2 lbs)

EMC ETS 300 342-3

Safety EN60950, UL1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-11

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

25001, 25011 TMA Twin 900 12 dB SL AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2009-12-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

34

Page 36: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4, Typical

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 925-953

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility 25002 AISG 1.1 (Field upgradable to AISG 2.0);

25012 AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption @ 12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 880-908

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.0, Typical

UL Max Input Power (dBm) +10 dBm

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228x169x120 (9”x6.7”x4.8”)

Weight(lbs) <6 kg (13.2 lbs)

EMC ETS 300 342-3

Safety EN60950, UL 1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-1

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

25002, 25012 TMA Twin 900 EGSM 28 MHz 12 dB SL AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2009-12-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

35

Page 37: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4, Typical

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 935-960

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility

AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode: LGP25014 170-190 mA; LGP25016 high CWA alarm current

Power Consumption @12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) 16

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 890-915

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.0 dB, Typical

UL Max Input Power (dBm) +10 dBm

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228x169x120 (9”x6.7”x4.8”)

Weight(lbs) <6 kg (13.2 lbs)

EMC ETS 300 342-3

Safety EN60950, UL1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-1

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

25014, 25016 TMA Twin 900 16 dB AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2009-12-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

36

Page 38: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4, Typical

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 935-960

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility 25101 AISG1.1 (Field upgradable to AISG 2.0);

25111 AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption @12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 890-915

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.0 dB, Typical

UL Max Input Power (dBm) +10 dBm

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228x169x69 (9”x6.7”x2.7”)

Weight(lbs) <3 kg (<6.7 lbs)

EMC ETS 300 342-3

Safety EN60950, UL1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-11

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

25101, 25111 TMA Single 900 12 dB SL AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2010-02-19 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

37

Page 39: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4, Typical

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 925-953

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility 25102 AISG 1.1 (Field upgradable to AISG 2.0);

25112 AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption @ 12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 880-908

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.0, Typical

UL Max Input Power (dBm) +10 dBm

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228x169x69 (9”x6.7”x2.7”)

Weight(lbs) <3 kg (<6.7 lbs)

EMC ETS 300 342-3

Safety EN60950, UL 1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-1

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

25102, 25112 TMA Single 900 EGSM 28 MHz 12 dB SL AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2010-02-19 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

38

Page 40: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4, Typical

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 935-960

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility 25103 AISG1.1 (Field upgradable to AISG 2.0);

25113 AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode with high CWA (Current Window Alarm)

Power Consumption @12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 890-915

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.0 dB, Typical

UL Max Input Power (dBm) +10 dBm

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 228x169x69 (9”x6.7”x2.7”)

Weight(lbs) <3 kg (<6.7 lbs)

EMC ETS 300 342-3

Safety EN60950, UL1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-11

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

25103, 25113 TMA Single 900 12 dB AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2010-02-19 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

39

Page 41: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) <0.7 dB, Typical

Intermodulation @ 2 x 43 dBm Tx carrier (dBc), <-115 (<-158)

DL Frequency Range (MHz) 925-960

DL Return Loss > 20 dB, Typical

Input Voltage (V) 8-17

Power Handling, RMS >52 dBmAISG Compatibility

N/A

Alarm Functionality LGP19203 alarm current 170-190 mA; LGP19201 current alarm compatible with PDU LGP121nn

Power Consumption @12 VDC, 1.5 W

UL Rejection >83 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 880-915

UL Return Loss >20 dB, Typical

UL Bypass Loss(dB) 2.0, Typical

UL Max Input Power (dBm) +10

UL Noise Figure < 1.7 dB, Typical

UL Output 3rd Order Intercept Point(dBm) > +23

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 169 x 272 x 89 (7”x11”x4”)

Weight(lbs) <5.7 kg (12.3 lbs)

EMC ETS 300 342-3

Safety EN 60 950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP65

MTBF >1 million hours

Storage ETS 300 019-1-11

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

LGP192nn Dual Duplex EGSM 900 MHz Full Band

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08405 Rev B Updated: 2010-01-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

40

Page 42: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) < 0.45 dB, Typical

Intermodulation @ 2 x 43 dBm Tx carrier dBm (dBc), <-118 (<-161)

DL Frequency Range (MHz) 869-894

DL Return Loss > 21 dB, Typical

Input Voltage (V) 8-17

Power Handling, RMS >57 dBmAISG Compatibility

N/A

Alarm Functionality Two levels, individually supervised LNAs

Power Consumption @12 VDC, 1.2 W

UL Rejection SMR Rejection, >30 dB @ 851 MHz

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 824-849

UL Return Loss >21 dB, Typical

UL Bypass Loss(dB) <2.2

UL Max Input Power (dBm) +14

UL Noise Figure < 1.7 dB, Typical

UL Output 3rd Order Intercept Point(dBm) > +23, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 181 x 365 x 66 (7”x1’2x4”)

Weight(lbs) <7.9 kg (17.4 lbs)

EMC FCC Part 15

Safety UL60 950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP65

MTBF >1 million hours

Storage ETS 300 019-1-11

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

LGP174nn TMA DD 850 MHz with SMR Rejection

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08411 Rev. A with added Bypass Loss Aug 24 2010 Updated: 2010-08-24

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

41

Page 43: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) < 0.5 dB

Intermodulation 2 Tx@43 dBm (dBc), <-158

DL Frequency Range (MHz) 1930-1990

DL Return Loss > 20 dB

Input Voltage (V) 8-17

Power Handling, RMS >54 dBmAISG Compatibility

N/A

Alarm Functionality Two levels, individually supervised LNAs

Power Consumption @12 VDC, 1.2 W

UL Rejection @1912 MHz, >10 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1850-1910

UL Return Loss >20 dB

UL Bypass Loss(dB) <2.6 dB

UL Max Input Power (dBm) +14

UL Noise Figure < 1.6 dB

UL Output 3rd Order Intercept Point(dBm) > +23

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 181 x 365 x 66 (7”x1’2x4”)

Weight(lbs) 6.4 kg (14.1 lbs)

EMC FCC Part 15

Safety UL60 950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP65

MTBF >1 million hours

Storage ETS 300 019-1-11

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

LGP175nn TMA DD 1900 MHz with 10 dB Rejection at 1912 MHz

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

PNLGP175nn Updated: 2010-01-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

42

Page 44: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4 dB, Typical

Intermodulation @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port

DL Frequency Range (MHz) 1805-1880

DL Return Loss > 18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17

Power Handling, RMS >53 dBmAISG Compatibility

AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received current alarm mode. Current alarm: LGP18520: Low CWA, LGP18521: High CWA

Power Consumption @12 VDC, 1.5 W per LNA

UL Rejection >80 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1710-1785

UL Return Loss >18 dB

UL Bypass Loss(dB) < 3.0 dB, Typical

UL Max Input Power (dBm) +12

UL Noise Figure 1.5 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +26 dBm, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 169 x 272.5 x 67.7 (7”x11”x3”)

Weight(lbs) <4.5kg (9.9 lbs)

EMC ETS 301 489

Safety EN 60 950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP 68

MTBF >1 million hours

Storage ETS 300 019-1-11

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

LGP18520, LGP18521 Twin Dual Duplex 1800 MHz Full Band

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

43

Page 45: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4 dB, Typical

Intermodulation @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port

DL Frequency Range (MHz) 1805-1880

DL Return Loss > 18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17

Power Handling, RMS >53 dBmAISG Compatibility

LGP18501, 06 no AISG; LGP18507, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18517, 20, 21 AISG 2.0

Alarm Functionality LGP18506: 170-190 mA alarm current; LGP18501: current alarm compatible with PDU LGP121nn; LGP18507, 10, 17, 20, 21 AISG compatible or in case of no AISG command received current alarm mode: LGP18510, 20: 170-190 mA; LGP18507, 17: current alarm compatible with PDU LGP121nn

Power Consumption @12 VDC, 1.5 W per LNA

UL Rejection >80 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1710-1785

UL Return Loss >18 dB

UL Bypass Loss(dB) < 3.0 dB, Typical

UL Max Input Power (dBm) +12

UL Noise Figure 1.5 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +26 dBm, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 169 x 272.5 x 67.7 (7”x11”x3”)

Weight(lbs) <4.5kg (9.9 lbs)

EMC ETS 301 489

Safety EN 60 950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection LGP18501, 06: IP 65; LGP18507, 10, 17, 20, 21 IP 68

MTBF >1 million hours

Storage ETS 300 019-1-11

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

LGP185nn Twin Dual Duplex 1800 MHz Full Band

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08219 Rev C Updated: 2010-11-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.44

Page 46: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4 dB, Typical

Intermodulation @ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc)

DL Frequency Range (MHz) 1930-1990

DL Return Loss > 18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17

Power Handling, RMS >53 dBmAISG Compatibility

LGP18601, 06 no AISG; LGP18607, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18617, 20 AISG 2.0

Alarm Functionality LGP18606: 170-190 mA alarm current; LGP18601: current alarm compatible with PDU LGP121nn; LGP18607, 10, 17, 20 AISG compatible or in case of no AISG command received current alarm mode: LGP18610, 20: 170-190 mA; LGP18607, 17: current alarm compatible with PDU LGP121nn

Power Consumption @12 VDC, 1.5 W per LNA

UL Rejection >80 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1850-1910

UL Return Loss >18 dB

UL Bypass Loss(dB) < 3.0 dB, Typical

UL Max Input Power (dBm) +12

UL Noise Figure 1.5 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +26 dBm, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 169 x 272.5 x 67.7 (7”x11”x3”)

Weight(lbs) <4.5kg (9.9 lbs)

EMC FCC Part 15

Safety UL60 950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection LGP18601, 06: IP 65; LGP18607, 10, 17, 20 IP 68

MTBF >1 million hours

Storage ETS 300 019-1-11

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

LGP186nn Twin Dual Duplex 1900 MHz Full Band

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08220 Rev B Updated: 2010-01-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

45

Page 47: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.3 dB, Typical

Intermodulation @ 2 x 43 dBm Tx carriers, In receive band, <-125 dBm, referred to Antenna port

DL Frequency Range (MHz) 2110-2170

DL Return Loss >20 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17

Power Handling, RMS >49 dBm (4x43 dBm)AISG Compatibility

LGP21508, 09 AISG 1.1 (field upgradable to AISG 2.0); LGP21518, 19 AISG 2.0

Alarm Functionality AISG Compatible. In case of no AISG command received current alarm mode. LGP21509, 19: 170-190 mA; LGP21508, 18: current alarm compatible with PDU LGP121nn

Power Consumption @12 VDC, 1.5 W per LNA

UL Rejection >85 dB (2110-2170 MHz)

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1920-1980

UL Return Loss >18 dB

UL Bypass Loss(dB) <2.0 dB, Typical

UL Max Input Power (dBm) +14

UL Noise Figure 1.4 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 154 x 192 x 50 (6”x8”x2”)

Weight(lbs) 2.5kg (5.5 lbs)

EMC ETSI 125 113

Safety EN 60 950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)

Ingress Protection IP65 and IP68

MTBF >1 million hours

Storage ETS 300 019-1-11

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

LGP215nn Micro Twin Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08222 Rev D Updated: 2010-10-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.46

Page 48: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) <0.4

Intermodulation <-155 dBc (2x43 dBm TX)

DL Frequency Range (MHz) 2110-2170 with 698-746 bypass

DL Return Loss >18 dB

Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Power Handling, RMS 700: 500 W; AWS 300WAISG Compatibility AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version)

TSAW-07BP112-001 has AISG 2.0 loaded from factory

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption <1.5 W

UL Rejection >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz

UL Gain(dB) 13

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1710-1770 with 698-746 bypass

UL Return Loss >18 dB

UL Bypass Loss(dB) <1.9

UL Max Input Power (dBm) +14 dBm

UL Noise Figure <1.6 dB

UL Output 3rd Order Intercept Point(dBm) >+23 (Input IP3 >+11)

Colors Off white (NCS 1502-R)

RF Connectors Female 7/16 DIN, long neck

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 250x169x82 (9.9”x6.7”x3.1”)

Weight(lbs) <9 (<4 kg)

EMC FCC part 15

Safety UL 60950; UL 1950, TUV

APPROVAL AND TESTS

Housing Aluminium

Lightning Protection IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs

Ingress Protection IP67 minimum

MTBF >1 million hours

Storage ETS 300 019-1-1

Temperature Range -40 to +65°C

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

TSAW-07BP111-001 TMA Dual Band AWS with 700 Bypass 13 dB AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-12-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

47

Page 49: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) <0.4

Intermodulation <-155 dBc (2x43 dBm TX)

DL Frequency Range (MHz) 2110-2170 with 698-746 bypass

DL Return Loss >18 dB

Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Power Handling, RMS 700: 500 W; AWS 300WAISG Compatibility AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version)

TTAW-07BP112-001 has AISG 2.0 loaded from factory

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption <1.5 W

UL Rejection >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz

UL Gain(dB) 13

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1710-1770 with 698-746 bypass

UL Return Loss >18 dB

UL Bypass Loss(dB) <1.9

UL Max Input Power (dBm) +14 dBm

UL Noise Figure <1.6 dB

UL Output 3rd Order Intercept Point(dBm) >+23 (Input IP3 >+11)

Colors Off white (NCS 1502-R)

RF Connectors Female 7/16 DIN, long neck

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 250x169x139 (9.9”x6.7”x5.4”)

Weight(lbs) <18 (<8 kg)

EMC FCC part 15

Safety UL 60950; UL 1950, TUV

APPROVAL AND TESTS

Housing Aluminium

Lightning Protection IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs

Ingress Protection IP67 minimum

MTBF >1 million hours

Storage ETS 300 019-1-1

Temperature Range -40 to +65°C

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

TTAW-07BP111-001 TMA Twin Dual Band AWS with 700 Bypass 13 dB AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-12-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

48

Page 50: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) <0.3

Intermodulation @ 2 x +43 dBm Tx carriers in receive band, <-160 dBc, reffered to antenna port

DL Frequency Range (MHz) 2110-2155

DL Return Loss >20

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17

Power Handling, RMS >49 dBm (4x43 dBm)AISG Compatibility

AISG 2.0

Alarm Functionality AISG compatible cor in case of no AISG command received current alarm mode 170-190 mA

Power Consumption <1.1 W per branch @ 12V

UL Rejection >82 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1710-1755

UL Return Loss >20

UL Bypass Loss(dB) <2.0, Typical

UL Max Input Power (dBm) +14

UL Noise Figure <1.4 dB

UL Output 3rd Order Intercept Point(dBm) >+23

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female, long neck

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 192x154x50 mm (7.6”x5.9”x2.0”)

Weight(lbs) <2.5kg (5.5 lbs)

EMC 3GPP: TS 25.113

Safety EN60950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)

Ingress Protection IP65 and IP68

MTBF >1 million hours

Storage ETS 300 019-1-1

Temperature Range -40° C to +65° C (-40° F to + 149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

TTAW-0000112-001 TMA Micro Twin AWS 12 dB AISG 2.0

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev B Updated: 2010-10-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

49

Page 51: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) <0.35

Intermodulation <-155 dBc (2x43 dBm TX)

DL Frequency Range (MHz) 2110-2170

DL Return Loss >18 dB

Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Power Handling, RMS 300 WAISG Compatibility AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW-

60BW112-001 has AISG 2.0 loaded from factory

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption <2 W

UL Rejection >80 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1710-1770

UL Return Loss >18 dB

UL Bypass Loss(dB) <2.6

UL Max Input Power (dBm) +14 dBm

UL Noise Figure <1.8

UL Output 3rd Order Intercept Point(dBm) >+22 (Input IP3 >+10)

Colors Off white (NCS 1502-R)

RF Connectors Female 7/16 DIN, long neck

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 192x154x50 mm (7.6”x5.9”x2.0”)

Weight(lbs) <7 (<3 kg)

EMC FCC part 15

Safety UL 60950; UL 1950, TUV

APPROVAL AND TESTS

Housing Aluminium

Lightning Protection IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs

Ingress Protection IP67 minimum

MTBF >1 million hours per TMA

Storage ETS 300 019-1-1

Temperature Range -40 to +65°C

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

TTAW-60BW111-001 TMA Micro Twin AWS 60 MHz BW 12 dB AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A Updated: 2010-10-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

50

Page 52: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) <0.4

Intermodulation <-155 dBc (2x43 dBm TX)

DL Frequency Range (MHz) 728-746 and 2110-2170

DL Return Loss >18 dB

Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Power Handling, RMS 700: 500 W; AWS 300WAISG Compatibility AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version)

TS07-AWDB112-001 has AISG 2.0 loaded from factory

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption <1.5 W (per LNA)

UL RejectionTX rejection >80 dB; 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz; AWS TMA: >25 dB rejection at 1700 and 1800 MHz

UL Gain(dB) 13

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 698-716 MHz (Bandpass = 15.5 MHz, Roll off beginns at 699.25 and 714.75 MHz) and 1710-1770 MHz

UL Return Loss >18 dB

UL Bypass Loss(dB) AWS: <2.0, 700: < 2.9

UL Max Input Power (dBm) +14 dBm

UL Noise Figure AWS: < 1.6 dB, 700: <2.0 dB

UL Output 3rd Order Intercept Point(dBm) >+22 (Input IP3 >+10)

Colors Off white (NCS 1502-R)

RF Connectors Female 7/16 DIN, long neck

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 305x305x127 (12”x12”x5”)

Weight(lbs) <27.6 (<12.5 kg)

EMC FCC part 15

Safety UL 60950; UL 1950, TUV

APPROVAL AND TESTS

Housing Aluminium

Lightning Protection IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs

Ingress Protection IP67 minimum

MTBF >1 million hours per TMA

Storage ETS 300 019-1-1

Temperature Range -40 to +65°C

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

TS07-AWDB111-001 TMA Dual Band 700/AWS 13 dB AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-12-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

51

Page 53: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 850 MHz, 0.4; 1900 MHz, 0.5

Intermodulation @ 2 x +43 dBm Tx carriers, in receive band, <-160 dBc, referred to antenna port

DL Frequency Range (MHz) 869-894 / 1930-1990

DL Return Loss > 18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8 -17

Power Handling, RMS 850: >57 dBm; 1900: >55 dBmAISG Compatibility AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version)

TT08-19DB112-001 has AISG 2.0 loaded from factory

Alarm Functionality AISG compatibe or in case of no AISG command received current alarm mode 270-290 mA

Power Consumption < 1.8 W per branch @ 12V

UL Rejection SMR Rejection, >30 dB @ 851 MHz

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 824-849 / 1850-1910

UL Return Loss >18 dB

UL Bypass Loss(dB) 2.5, Typical

UL Max Input Power (dBm) +14 dBm

UL Noise Figure <1.7 dB, Typical

UL Output 3rd Order Intercept Point(dBm) +25, Typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female, long neck

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 360x169x137mm (14.2”x6.7”x5.4”)

Weight(lbs) <22

EMC 3GPP: TS 25.113

Safety EN 60950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP65 and IP68

MTBF >1 million hours (per TMA)

Storage ETS 300 019-1-1

Temperature Range -40° C to +65° C (-40° F to + 149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

TT08-19DB111-001 TMA Twin Dual Band 850/1900 12 dB AISG 1.1

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev B Updated: 2010-02-04 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

52

Jackie Chau
0118
Page 54: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 850 MHz, <0.3; 1900 MHz, <0.5

Intermodulation @ 2 x +43 dBm TX carriers, in receive band, <160 dBc, reffered to antenna port

DL Frequency Range (MHz) 1930-1990 with 824-894 bypass

DL Return Loss >18

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8 -17

Power Handling, RMS 850: >57 dBm; 1900: >55 dBmAISG Compatibility AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version)

TT19-08BP112-001 has AISG 2.0 loaded from factory

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption <1.1W @12V

UL Rejection >77 dB

UL Gain(dB) 12

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 1850-1910 with 824-894 bypass

UL Return Loss >18

UL Bypass Loss(dB) 2.5, Typical

UL Max Input Power (dBm) +14 dBm

UL Noise Figure <1.7 dB, Typical

UL Output 3rd Order Intercept Point(dBm) >+23

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 female, long neck

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 250x169x137 mm (9.9”x6.7”x5.4”)

Weight(lbs) <16

EMC 3GPP: TS 25.113

Safety EN60950

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection 3 kA 10/350 µs; 20 kA (Shield)

Ingress Protection IP65 and IP68

MTBF >1 million hours per TMA

Storage ETS 300 019-1-1

Temperature Range -40° C to +65° C (-40° F to +149° F)

ENVIRONMENTAL SPECIFICATIONS

Transportation ETS 300 019-1-2

Operational ETS 300 019-1-4

TT19-08BP111-001 TMA Twin 1900 with 850 Bypass 12 dB AISG 1.1

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev B Updated: 2010-02-04 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

53

Page 55: Powerwave Product Catalog

POWERWAVE Tower Mounted Amplifiers

DL Insertion Loss (dB) 0.4

Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)

DL Frequency Range (MHz) 935-960

DL Return Loss >18 dB

Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17

Power Handling, RMS >53.5 dBmAISG Compatibility TU09-0000011-001 AISG 1.1 (Field upgradable to AISG 2.0);

TU09-0000012-001 AISG 2.0

Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption @12 VDC, 1.5W per LNA

UL Rejection >82 dB

UL Gain(dB) Variable 0-12 in 1 dB steps

ELECTRICAL SPECIFICATIONSUL Frequency Range (MHz) 890-915

UL Return Loss >18 dB

UL Bypass Loss(dB) <5.5 (Including 3 dB hybrid loss)

UL Max Input Power (dBm)

UL Noise Figure 1.5dB, typical at 12 dB gain

UL Output 3rd Order Intercept Point(dBm) +25, typical

Colors Off white (NCS 1502-R)

RF Connectors DIN 7/16 Female

Mounting Kit Mounting kit for pole and wall is included

MECHANICAL SPECIFICATIONSDimension HxWxD mm(ft) 230.5x171x160 (9.1”x6.8”x6.3”)

Weight(lbs) <7 kg (15.4 lbs)

EMC ETS 300 342-3

Safety EN60950, UL1950, ETL

APPROVAL AND TESTS

Housing Aluminum

Lightning Protection

Ingress Protection IP68

MTBF >1 million hours per TMA

Storage

Temperature Range -40°C to +65°C (-40°F to +149°F)

ENVIRONMENTAL SPECIFICATIONS

Transportation

Operational

TU09-000001n-001 ACTIVE UGC 900 12dB VAR GAIN SL AISG

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-01-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

54

Page 56: Powerwave Product Catalog

Base Station Products

POWERWAVE Power Distribution Units

TMA Products Power Distribution Units

Title Up-Link (MHz) Down-Link (MHz) Part Number Page

PDU Lite – Indoor N/A N/A LGP121nn 56

PDU Lite – Indoor (For Dual Band TMAs) N/A N/A LGP18104 57

55

Page 57: Powerwave Product Catalog

POWERWAVE Power Distribution Units

Output Current(Max) 375 mA/port

Output Voltage 12 V DC +/- 1 V

Sum Alarm Output Port Relay Normally Open and Normally Closed

Output Protection Automatic short-circuit protection, auto recovery

Input Voltage 20 to 60 V DC, positive or negative

ELECTRICAL DATA

Input Protection and Polarity Automatic Polarity Agile

Input Current(Max) 1A

Weight(lbs) 120 g (0.3 lbs.)

Dimension HxWxD mm(ft) 3.9 x 0.8 x 2.4 in

MECHANICAL SPECIFICATIONS

Environmental ETS 300 019

EMC ETS 300 342-3

APPROVAL AND TESTS

LGP121nn PDU Lite – Indoor

Humidity 5-95% RH non condensing

MTBF >1 million hours

ENVIRONMENTAL SPECIFICATIONSTemperature Range -33° C to +60° C (-27° F to +140° F)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08280 Rev A Updated: 2010-01-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.56

Page 58: Powerwave Product Catalog

POWERWAVE

Output Current(Max) 375 mA/port

Output Voltage 12 V DC +/- 1 V

Sum Alarm Output Port Relay Normally Open and Normally Closed

Output Protection Automatic short-circuit protection, auto recovery

Input Voltage 20-60 V DC, positive or negative

ELECTRICAL DATA

Input Protection and Polarity Automatic Polarity Agile

Input Current(Max) 3x1 A

Weight(lbs) 700 (1.55)

Dimension HxWxD mm(ft) 19” 1HU (19 x 1.75)

MECHANICAL SPECIFICATIONS

Environmental ETS 300 019

EMC ETS 300 342-3

APPROVAL AND TESTS

LGP18104 PDU Lite – Indoor (For Dual Band TMAs)

Humidity 5-95% RH non condensing

MTBF >1 000 000 hours (over 100 years)

ENVIRONMENTAL SPECIFICATIONSTemperature Range -33° to +60 ° (-27° to +140°)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-09-21 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Power Distribution Units

57

Page 59: Powerwave Product Catalog

Base Station Products

POWERWAVE Current Injectors

TMA Products Current Injectors

Frequency Range (MHz) Return Loss (dB) Insertion Loss (dB) Part Number Page

698-960 and 1710-2690 >20 <0.1 LGP213nn 59

698-960 and 1710-2690 >20 <0.1 LGP233nn 60

806-960 or 1710-1990 >25 N/A LGP138nn 61

58

Page 60: Powerwave Product Catalog

POWERWAVE Current Injectors

Insertion Loss (dB) < 0.1

DC Current (Max) 1.5 AIntermodulation 2x 43 dBm Tx Carriers dBm <-116 dBm (<-159 dBc)

TECHNICAL SPECIFICATIONS

Frequency Range (MHz)698 - 960 and 1710 - 2690 (Frequency extended: LGP21301 from Rev L, LGP21302 from Rev K, Sep 1 2010)

Return Loss (dB) >20

Housing Aluminum

RF ConnectorsDIN 7/16 female and male LGP21301 ANT female, BTS male LGP21302 ANT male, BTS female

DC Supply Connector SMA female

Color Off-white, NCS 1502R

MECHANICAL SPECIFICATIONSDimensions - Without Mounting Plate - mm(in) 87 x 41 x 51 (3.4 x 1.6 x 2.0)

Weight kg(lbs) 0.32 (0.71)

Ingress Protection IP 68 - EN 60 529

Environmental ETS 300 019

Lightning Protection IEC 61312-1

Safety EN 609 50, UL 60950, ETL

ENVIRONMENTAL SPECIFICATIONSTemperature Range Celsius (Fahrenheit) -40° to +65 (-40° to +149°)

MTBF >1 000 000 hours

LGP213nn Outdoor Current Injector

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08406 Rev. B Updated: 2010-09-02 © Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

59

Page 61: Powerwave Product Catalog

POWERWAVE Current Injectors

Insertion Loss (dB) <0.1

DC Current (Max) 1.5 AIntermodulation 2x 43 dBm Tx Carriers dBm <-116 dBm (<-159 dBc)

TECHNICAL SPECIFICATIONS

Frequency Range (MHz)698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010)

Return Loss (dB) >20

Housing Zink Alloy

RF ConnectorsDIN 7/16 female and male LGP23301 ANT female, BTS male LGP23302 ANT male, BTS female

DC Supply Connector SMB male

Color Silver plating

MECHANICAL SPECIFICATIONSDimensions - Without Mounting Plate - mm(in) 87 x 41 x 51 (3.4 x 1.6 x 2.0)

Weight kg(lbs) 0.32 (0.71)

Ingress Protection IP 54 - EN 605 29

Environmental ETS 300 019

Lightning Protection IEC 61312-1

Safety EN 609 50, UL 609 50, ETL

ENVIRONMENTAL SPECIFICATIONSTemperature Range Celsius (Fahrenheit) -5° to +55° (23° to +131°)

MTBF >1 000 000 hours (over 100 years)

LGP233nn Indoor Current Injector

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08407 Rev. B Updated: 2010-09-14 © Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

60

Page 62: Powerwave Product Catalog

POWERWAVE Current Injectors

Insertion Loss (dB) < 0.1

DC Current, (Max) 1 AIntermodulation 2x 43 dBm Tx Carriers dBm <-110 dBm, (<-153)

TECHNICAL SPECIFICATIONSFrequency Range (MHz) 806 - 960MHz or 1710 - 1990

Return Loss (dB) >25

Housing Aluminum

RF Connectors DIN 7/16 or type N female and male

DC Supply Connector Screw Terminal Block

Color Off-white, NCS 1502R

MECHANICAL SPECIFICATIONSDimensions - Without Mounting Plate - mm(in) 107 x 48 x 62 (4.2 x 1.9 x 2.4)

Weight kg(lbs) 0.45 (<1)

Ingress Protection IP 65 - EN 60 529

Environmental ETS 300 019

Lightning Protection IEC 1312-1

Safety EN 609 50, UL 60950, ETL

ENVIRONMENTAL SPECIFICATIONSTemperature Range Celsius (Fahrenheit) -40° to +65 (-40° to +149°)

MTBF >1 000 000 hours

LGP138nn Outdoor Current Injector

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08276 Rev B Updated: 2010-09-14 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

61

Page 63: Powerwave Product Catalog

Base station co-siting and new technology overlays are growing trends around the globe and Powerwave is leading the way with a range of same band, dual band and triple band solutions. There are many reasons for adopting co-siting filter solutions, including limited tower space, zoning regulations and public opinion against new site locations. In addition, as newer technology platforms such as UMTS or LTE® are deployed, the need for straightforward, low loss, high performance overlay solutions are required to allow operators to maximize existing network CAPEX by reusing installed cable and antenna structures.

Filter ProductsPower wave

Same Band Combiners T1

Diplexer/Crossband Combiner

Triplexer/Crossband Combiners

Duplexers

Interference Filters

Page 64: Powerwave Product Catalog

Base Station Products

POWERWAVE Filters

Base Station Products Filters

Range (MHz) Insertion Loss (dB) Return Loss (db) Part Number Page

824-894 4.2 dB maximum 18 dB minimum CM1000-AMPS-xxx 64

880-960 4.5 dB maximum 18 dB minimum CM1001-EGSM-xxx 65

698-2170 700/800 Port: 0.15 dB max. 20 dB minimum CM1007-DBPXBC-xxx 66

1710-2690 0.10 dB typ., 0.20 dB max. 20 dB minimum CM1005-DBPXBC 67

1710-2690 0.10 dB typ., 0.30 dB max. 20 dB minimum CM1006-TBPXBC 68

1710-2170 0.3 dB maximum (Rx) 0.6 dB maximum (Tx)

18 dB minimum LGP145nn 69

1850-1990 0.6 dB maximum (Rx) 18 dB minimum LGP146nn 70

880-2170 0.2 dB maximum 20 dB minimum LGP141nn 71

890-960 -01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz)

>18 dB LGP195nn 72

824-2170 <0.1 dB Typical 20 dB minimum LGP219nn 73

63

Page 65: Powerwave Product Catalog

POWERWAVE Filters

AISG Mode Per AISG 1.1, 2.0

AISG Control Signal Loss 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz

Isolation Between Ports Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum

Common Port TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1

Continuous Current Handling 5 A, 0-35VDC

DC Load 100 mA, +/-20 mA at GSM BTS Ports

Voltage Drop with 15W Power 1 V maximum @ 10-30VDC

Supply Voltage Handling 0-35VDC

Intermodulation (IM) (dBc) (Products, Max) -115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band

Range (MHz) 824-894

Frequency Range (Full Band MHz) Uplink, 824-849 Downlink, 869-894

TECHNICAL SPECIFICATIONSFilter Type 850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1

Average Power Handling (dBm) N/A 200 watts (+53.0)

Peak Power (dBm) N/A1200 watts (+60.8) PEP maximum at 3000m, +65C and

2:1 antenna mismatch

Insertion Loss (dB) 4.2 dB maximum 0.6 dB maximum

Return Loss (dB) 18 dB minimum 18 dB minimum

RF Connectors DIN 7/16 female

Housing Aluminum, IP 67

Mounting Kit - Tower Mounting Hose Clamps in Stainless Steel (order P/N CM1000-AMPS-002)

Mounting Kit - Rack Mount 19” Rack Mount Brackets (order P/N CM1000-AMPS-001)

Dimensions mm(in) 437.8 x 228 x 61.4 (17.24”x 8.98”x 2.42”) - Excluding Rack/Mast Brackets & Connectors

MECHANICAL SPECIFICATIONS

Color Off White (NCS 1502-R)

Weight kg(lbs) 8.15 (18)

Ingress Protection IP67

Safety EN 60950, UL 60950

EMC 3GPP: TS 25.113

Environmental ETS 300 019

Temperature Range Celsius (Fahrenheit) -40° C to +65° C (-40° to +149°)

ENVIRONMENTAL SPECIFICATIONS

Surge Protection IEC 61312-1

MTBF 1 Million Hours

CM1000-AMPS-xxx 850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1

The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.

Block Diagram - Type 1 Same Band Combiner Typical Application - GSM & UMTS CombiningTower Mounting Brackets Option Shown

D031-08700B Updated: 2010-03-23 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.64

Page 66: Powerwave Product Catalog

POWERWAVE Filters

AISG Mode Per AISG 1.1, 2.0

AISG Control Signal Loss 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz

Isolation Between Ports Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum

Common Port TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1

Continuous Current Handling 5 A, 0-35VDC

DC Load 100 mA, +/-20 mA at GSM BTS Ports

Voltage Drop with 15W Power 1 V maximum @ 10-30VDC

Supply Voltage Handling 0-35VDC

Intermodulation (IM) (dBc) (Products, Max) -115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band

Range (MHz) 880-960

Frequency Range (Full Band MHz) Uplink, 880-915 Downlink, 925-960

TECHNICAL SPECIFICATIONSFilter Type GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1

Average Power Handling (dBm) N/A 200 watts (+53.0)

Peak Power (dBm) N/A1200 watts (+60.8) PEP maximum at 3000m, +65C and

2:1 antenna mismatch

Insertion Loss (dB) 4.5 dB maximum 0.6 dB maximum

Return Loss (dB) 18 dB minimum 18 dB minimum

RF Connectors DIN 7/16 female

Housing Aluminum, IP 67

Mounting Kit - Tower Mounting Hose Clamps in Stainless Steel (order P/N CM1001-EGSM-002)

Mounting Kit - Rack Mount 19” Rack Mount Brackets (order P/N CM1001-EGSM-001)

Dimensions mm(in) 437.8 x 228 x 61.4 (17.24”x 8.98”x 2.42”) - Excluding Rack/Mast Brackets & Connectors

MECHANICAL SPECIFICATIONS

Color Off White (NCS 1502-R)

Weight kg(lbs) 8.15 (18)

Ingress Protection IP67

Safety EN 60950, UL 60950

EMC 3GPP: TS 25.113

Environmental ETS 300 019

Temperature Range Celsius (Fahrenheit) -40° C to +65° C (-40° to +149°)

ENVIRONMENTAL SPECIFICATIONS

Surge Protection IEC 61312-1

MTBF 1 Million Hours

CM1001-EGSM-xxx GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1

The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.

Block Diagram - Type 1 Same Band Combiner Typical Application - GSM & UMTS CombiningTower Mounting Brackets Option Shown

D031-08701B Updated: 2010-03-23 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.65

Page 67: Powerwave Product Catalog

POWERWAVE Filters

DC Bias/AISG Auto-Sense (-001 Option): DC/AISG Auto-Sense from low or high channels (see logic table below)Antenna Sniffer Port (-002 Option): Option -001 + Sniffer Port -43 to -30 dB (698-894 and 1710- 2170 MHz)

Common+Port TMA supply voltage, fed via the RF cable, +32 V, 2 A Maximum

Peak Power (dBm) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch

5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch

Intermodulation (IM) (dBc) (Products, Max) -115 dBm (-158) maximum in Rx band, two/+43 dBm carriers in the Tx band

DC/AISG to Low Channel (-006 Option): Low frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)DC/AISG to High Channel (-007 Option): High frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)

DC/AISG to Low & High Channels (-005 Option): All ports are permanently connected for DC and AISG connectivity (no Auto-Sense function)

AISG Port+Converter (-003 Option): Options -001 & -002 + AISG Connector (Internal Converter AISG 1.1/2.0 Compatible)DC/AISG Delete (-004 Option): All ports are DC and AISG isolated from each other (no Auto-Sense function)

Frequency Range 698-894 MHz/1710-2170 MHz

Frequency Range 700/800 Port, 698-894 MHz AWS/PCS Port, 1710-2170 MHz

Range 698-2170 MHz

TECHNICAL SPECIFICATIONSFilter Type Diplex Filter for 700/800 MHz and AWS/PCS

Isolation (Channel to Channel) 60 dB minimum

Average Power Handling (dBm) 500 watts (+57) max. 500 watts (+57) max.

Rejection 60 dB min. @ 1710-2170 MHz 60 dB min. @ 698-894 MHz

Insertion Loss 700/800 Port: 0.15 dB Max. AWS/PCS Port: 0.15 dB Max.

Return Loss 20 dB minimum 20 dB minimum

Sniffer Port Connector N-F (IP67 rated protective cap included)

RF Connectors DIN 7/16 female, long barrel

Mounting_Kit Hose Clamps in Stainless Steel

AISG Connector Per IEC-60130-9 (IP67 rated protective cap included)

Housing Aluminum

Dimensions mm(in) 125 x 227.5 x 83 (4.92” x 8.96” x 3.27”), excluding connectors and bracket

MECHANICAL SPECIFICATIONS

Color Off White (NCS 1502-R)

Weight kg(lbs) 3.0 (6.5 lbs) maximum

Ingress Protection IP67 (IP67 rated cap must be connected to any unused ports)

Safety EN 60 950, UL 1950, ETL

EMC ETS 300 342-3

Environmental ETS 300 019

Temperature Range Celsius (Fahrenheit) -40°to +65°(-40°to +149°)

ENVIRONMENTAL SPECIFICATIONS

Lightning Protection IEC 61312-1, 3 kA 10/350 µs, 8 kA 8/20 µs

MTBF > 2 Million Hours

CM1007-DBPXBC-xxx Diplex Filter for 700/800 MHz and AWS/PCS with DC Auto Sense

Product Assumes that AISG will always be on the same connector as DC.

CM1007-DBPXBC-005 Connection Connection N/A Hard-Wired Yes

CM1007-DBPXBC-004 No Connection No Connection N/A Hard-Wired Yes

CM1007-DBPXBC-007 No Connection Connection N/A Hard-Wired Yes

CM1007-DBPXBC-006 Connection No Connection N/A Hard-Wired Yes

CM1007-DBPXBC-003#3 Priority

Connection#2 Priority

Connection#1 Priority

ConnectionDC Auto-Sense *

No - BTS location only

DC/AISG Feedthru Low Port (698-894 MHz)

High Port (1710-2170 MHz) AISG Port DC/AISG

ConnectionTower Top

Capable

DC Auto Sense Logic Table

CM1007-DBPXBC-002#2 Priority

Connection#1 Priority

Connection N/ADC Auto-Sense *

Yes - Common to High Port Only

CM1007-DBPXBC-001#2 Priority

Connection#1 Priority

Connection N/ADC Auto-Sense *

Yes - Common to High Port Only

* Product assumes that AISG signal will always be associated with DC presence

D031-08690B Updated: 2010-07-12 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

66

Page 68: Powerwave Product Catalog

POWERWAVE Filters

Peak Power (dBm) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch

5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch

Average Power Handling (dBm) 500 watts (+57) max. 500 watts (+57) max.

Isolation (Channel to Channel) 50 dB minimum

Intermodulation (IM) (dBc) (Products, Max) -117 dBm (-160) maximum in Rx band, two/+43 dBm carriers in the Tx band

DC Bias/AISG Passthru (twin): -005: No Connection (DC Grounded)

-006: DC/AISG to issue 2.0 (connected all ports)

-007: DC/AISG to issue 2.0 (High Port to Antenna Port)

-008: DC/AISG to issue 2.0 (Low Port to Antenna

Port)

DC Bias/AISG Passthru (single): -01: No Connection (DC Grounded)

-02: DC/AISG to issue 2.0 (connected all ports)

-03: DC/AISG to issue 2.0 (High Port to Antenna Port)

-04: DC/AISG to issue 2.0 (Low Port to Antenna

Port)

Common+Port TMA supply voltage, fed via the RF cable, +31 V, 3 A Maximum

Rejection 50 dB min. @ 2300-2690 MHz 50 dB min. @ 1710-2170 MHz

Range 1710-2690

Filter Type Diplex Filter for 1700/1800/1900/2100 and 2300/2600MHz

TECHNICAL SPECIFICATIONS

Frequency Range 1710-2170 MHz/2300-2690 MHz

Return Loss 20 dB minimum 20 dB minimum

Insertion Loss 0.10 dB typ., 0.20 dB max. 0.10 dB typ., 0.20 dB max.

Frequency Range Low Port, 1710-2170 MHz High Port, 2300-2690 MHz

Housing Aluminum

RF Connectors DIN 7/16 female, long barrel

Mounting_Kit Hose Clamps in Stainless Steel

Color Off White (NCS 1502-R)

MECHANICAL SPECIFICATIONSDimensions mm(in) 158 x 112 x 61 (6.22”x 4.4”x 2.4”) excluding mounting brackets & connectors

Weight kg(lbs) 2.3 (5.1) maximum

Ingress Protection IP68

Safety EN 60 950, UL 1950, ETL

EMC ETS 300 342-3

Environmental ETS 300 019

Temperature Range Celsius (Fahrenheit) -40°to +65°(-40°to +149°)

ENVIRONMENTAL SPECIFICATIONS

Lightning Protection According to IEC 61312-1, 8 kA 8/20 uS;center pin (any port)-shield

MTBF 3 Million Hours

CM1005-DBPXBC Diplex Filter for 1700/1800/1900/2100 and 2300/2600 MHz

For Release in Spring 2011

D031-08695B Updated: 2010-11-30 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

67

Page 69: Powerwave Product Catalog

POWERWAVE Filters

DC Bias/AISG Passthru -001 (Single) / -006 (Twin) No Connection (DC Grounded)

Common+Port TMA supply voltage, fed via the RF cable, +/-31 V maximum, 3 A

Isolation Between Ports 50 dB minimum

DC Bias/AISG Passthru -002 (Single) / -007 (Twin) DC/AISG to issue 2.0 (connected all ports)

DC Bias/AISG Passthru -005 (Single) / -010 (Twin) DC/AISG to issue 2.0 (connected low port to antenna port)

DC Bias/AISG Passthru -004 (Single) / -009 (Twin) DC/AISG to issue 2.0 (connected mid port to antenna port)

DC Bias/AISG Passthru -003 (Single) / -008 (Twin) DC/AISG to issue 2.0 (connected high port to antenna port)

Intermodulation (IM) (dBc) (Products, Max) -117 dBm (-160) maximum in Rx band, two/+43 dBm carriers in the Tx band

Frequency Range Low Port, 1710-1880 MHz

Mid Port, 1920-2170 MHz

High Port, 2300-2690 MHzRange 1710-2690 MHz

TECHNICAL SPECIFICATIONS

Insertion Loss 0.10 dB typical (0.30 dB max.)

0.10 dB typical (0.30 dB max.)

0.10 dB typical (0.20 dB max.)

Peak Power (dBm) 3 kW (+65 dBm) PEP maximum at 3000m,

+65C and 2:1 antenna mismatch

3 kW (+65 dBm) PEP maximum at 3000m,

+65C and 2:1 antenna mismatch

2kW(+63) PEP max. at 3000m, +65°C and 2:1 antenna mismatch

Average Power Handling (dBm) 300 watts (+55) min 300 watts (+55) min 200 watts (+53) minReturn Loss 20 dB minimum 20 dB minimum 20 dB minimum

Housing Aluminum

RF Connectors DIN 7/16 female, long barrel

Mounting Kit Hose Clamps in Stainless Steel

Color Off White (NCS 1502-R)

MECHANICAL SPECIFICATIONSDimensions mm(in) 200 x 200 x 63.3 (7.9”x 7.9”x 2.5”) excluding mounting brackets & connectors

Weight kg(lbs) <3.0 (6.5)

Safety EN 60 950, UL 60 950, ETL

Ingress Protection IP68

Environmental ETS 300 019

ENVIRONMENTAL SPECIFICATIONSTemperature Range Celsius (Fahrenheit) -40° C to +65° C (-40° to +149°)

MTBF 2 Million Hours

CM1006-TBPXBC Triplex Filter for DCS, UMTS & 2600 MHz

For Release in Spring 2011

D031-08696B Updated: 2010-11-30 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.68

Page 70: Powerwave Product Catalog

POWERWAVE Filters

Peak Power (dBm) 1440 watts (+61) minimum 1600 watts (+62) minimum

Average Power Handling (dBm) 240 watts (+53.8) minimum 80 watts (+49) minimum

Rejection 74 dB min. 1920-1980 MHz & 59 dB min. 2110-2170 MHz

60 dB min. 1710-1880 MHz

DC Bias/AISG Passthru -01: DC/AISG to issue 2.0 (UMTS Port to

Antenna Port)

-02: DC/AISG to issue 2.0 (1800 Port to

Antenna Port)

-03: DC/AISG to issue 2.0 (connected all ports)

-04: No Connection (DC Grounded)

Common+Port TMA supply voltage, fed via the RF cable, +/-58.5 V maximum, 2 A

Intermodulation (IM) (dBc) (Products, Max) -118 dBm (-161) maximum in Rx band, two/+43 dBm carriers in the Tx band

Return Loss (dB) 18 dB minimum 18 dB minimum

Range (MHz) 1710-2170

Filter Type Diplexer for 1800/2100

TECHNICAL SPECIFICATIONS

Insertion Loss (dB) 0.3 dB maximum (Rx), 0.6 dB maximum (Tx) 0.5 dB maximum (Rx), 0.3 dB maximum (Tx)

Frequency Range (MHz) 1800 Port, 1710-1880 UMTS Port, 1920-2170

Frequency Range (Full Band MHz) 1710-1880 MHz/1920-2170

Housing Aluminum

Color Off White (NCS 1502-R)

Mounting Kit Hose Clamps in Stainless Steel

RF Connectors DIN 7/16 female

Dimensions mm(in) 180 x 162 x 61 (7”x 6”x 2”)

MECHANICAL SPECIFICATIONS

Volume N/A

Weight kg(lbs) 3.6 (7.9)

Ingress Protection IP65, EN 60 529

Safety EN60 950

EMC N/A

Environmental ETS 300 019

Temperature Range Celsius (Fahrenheit) -40°to +65°(-40°to +149°)

ENVIRONMENTAL SPECIFICATIONS

Lightning Protection 3 kA 10/350 us; center pin (any port) to shield and 50 kA 10/350 us; shield-shield (Pulse forms per IEC61312-1)

MTBF 10 Million Hours

LGP145nn Diplex Filter for 1800/UMTS with Configurable DC Transparency

D031-08227A Updated: 2010-03-18 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

69

Page 71: Powerwave Product Catalog

POWERWAVE Filters

Peak Power (dBm) N/A TRANSMIT, 1000W (+60 dBm) minimum

Average Power Handling (dBm) N/A 200 watts (+53) minimum

Rejection 40 dB minimum; 1930-1990 MHz 40 dB minimum; 1850-1910 MHz

DC Bias/AISG Passthru -01: DC/AISG to issue 2.0 (Rx Port to Antenna

Port)

N/A N/A N/A

Common+Port TMA supply voltage, fed via the RF cable, +31 V maximum, 1.1 A

Intermodulation (IM) (dBc) (Products, Max) -110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band

Return Loss (dB) 18 dB minimum 18 dB minumum

Range (MHz) 1850-1990

Filter Type Duplex Filter 1900

TECHNICAL SPECIFICATIONS

Insertion Loss (dB) 0.6 dB maximum (Rx) 0.5 dB maximum (Tx)

Frequency Range (MHz) RECEIVE,1850-1910 TRANSMIT, 1930-1990

Frequency Range (Full Band MHz) 1850-1910 MHz/1930-1990 MHz

Housing Aluminum

Color Off White (NCS 1502-R)

Mounting_Kit Hose Clamps in Stainless Steel

RF Connectors DIN 7/16 female

Dimensions mm(in) 163 x 181 x 65 (6”x 7”x 3”)

MECHANICAL SPECIFICATIONS

Volume N/A

Weight kg(lbs) 3.3 (7.3) maximum

Ingress Protection IP65, EN 60 529

Safety EN 60 950, UL 1950

EMC N/A

Environmental ETS 300 019

Temperature Range Celsius (Fahrenheit) -40°to +65°(-40°to +149°)

ENVIRONMENTAL SPECIFICATIONS

Lightning Protection IEC 61312-1

MTBF 10 Million Hours

LGP146nn 1900 MHz Duplex filter Outdoor with DC Bypass

D031-08691A Updated: 2010-01-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.70

Page 72: Powerwave Product Catalog

POWERWAVE Filters

DC Bias/AISG Passthru -09 (single) -09: DC/AISG to issue 2.0 (connected to UMTS port)

DC Bias/AISG Passthru -10 (single) -10: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)

DC Bias/AISG Passthru -08 (single) -08: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)

DC Bias/AISG Passthru -06 (single) -06: No Connection (DC Grounded)

DC Bias/AISG Passthru -07 (single) -07: DC/AISG to issue 2.0 (connected all ports)

DC Bias/AISG Passthru -14 (twin) -14: DC/AISG to issue 2.0 (connected to UMTS port)

DC Bias/AISG Passthru -15 (twin) -15: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)

DC Bias/AISG Passthru -13 (twin) -13: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)

DC Bias/AISG Passthru -11 (twin) -11: No Connection (DC Grounded)

DC Bias/AISG Passthru -12 (twin) -12: DC/AISG to issue 2.0 (connected all ports)

Common+Port TMA supply voltage, fed via the RF cable, +/-32 V maximum, 2 A

Peak Power (dBm) 1600 W (+62) PEP 1600 W (+62) PEP 1600 W (+62) PEP

Insertion Loss (dB) 0.1 dB typical (0.2 dB max.)

0.1 dB typical (0.3 dB max. Rx, 0.6 dB max.

Tx)

0.1 dB typical (0.5 dB max. Rx, 0.3 dB max. Tx)

Frequency Range (Full Band MHz) 900 Port, 880-960 1800 Port, 1710-1880 UMTS Port, 1920-2170

TECHNICAL SPECIFICATIONSRange (MHz) 880-2170

Isolation Between Ports Rejection Between Ports (except common), >50 dB

Coupled Port N/A

Intermodulation (IM) (dBc) (Products, Max) 3rd Order: -100 dBm; 5th Order: -116 dBm (Rx band products w/2x43 dBm in Tx

band)

3rd Order: -100 dBm; 5th Order: -116 dBm (Rx

band products w/2x43 dBm in Tx band)

-116 dBm (Rx band products w/2x43 dBm in Tx band)

Return Loss (dB) 20 dB minimum 20 dB minimum 20 dB minimumAverage Power Handling (dBm) 350 W (+55) max. 350 W (+55) max. 350 W (+55) max.

Coupled Port Connector N/A

RF Connectors DIN 7/16 female

Mounting Kit Hose Clamps in Stainless Steel

AISG Connector N/A

Housing Aluminum, IP 65 (Optional IP 68)

Dimensions mm(in) 169 x 228 x 69.7 (6.65”x 8.98”x 2.75”)

MECHANICAL SPECIFICATIONS

Color Off White (NCS 1502-R)

Weight kg(lbs) <3.0 (6.5)

Safety EN 60 950, UL 60 950, ETL

Ingress Protection IP65, EN 60 529

Environmental ETS 300 019

ENVIRONMENTAL SPECIFICATIONSTemperature Range Celsius (Fahrenheit) -40° C to +65° C (-40° to +149°)

MTBF 10 Million Hours

LGP141nn Triplex Filter for 900, 1800 MHz and UMTS with DC Transparency

D031-08652D Updated: 2010-07-26 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

71

Page 73: Powerwave Product Catalog

POWERWAVE Filters

Rejection -01: > 30 dB 869 to 889 MHz -02: > 37 dB 869 to 888 MHz -03: > 30 dB 869 to 895 MHz

Passband Return Loss >18 dB

Tx Passband Insertion Loss < 0.5 dB

Intermodulation IM dBc Products Max -110 dBm (-153 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band

Passband Peak Power Handling (dBm) 1585 watts (+62) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)

Passband Power Handling (dBm) 200 watts (+53) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)

Frequency Range (MHz) 890-960

Filter Type Co-Location Filter GSM900

TECHNICAL SPECIFICATIONS

Rx Passband Insertion Loss -01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz)

Tx Passband Frequency Range (MHz) -01: 935-960 MHz -02: 935-960 MHz -03: 941-960 MHz

Rx Passband Frequency Range (MHz) -01: 890-915 MHz -02: 890-915 MHz -03: 896-915 MHz

Housing Aluminum, Powder Coated

RF Connectors DIN 7/16 female

Mounting Kit Hose Clamps in Stainless Steel

Color Off White (NCS 1502-R)

MECHANICAL SPECIFICATIONSDimensions mm(in) 169 x 228 x 68 (7”x 9”x 2”)

Weight kg(lbs) 3.8 (8.4) maximum

MTBF >10 Million Hours

Ingress Protection IP65

Operating Humidity Range 0 to +95% Relative Humidity

ENVIRONMENTAL SPECIFICATIONSTemperature Range Celsius (Fahrenheit) -5° to +55° (23° to +131° )

LGP195nn Co-Location Filter GSM900

D031-08692A Updated: 2010-12-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

72

Page 74: Powerwave Product Catalog

POWERWAVE Filters

Peak Power (dBm) 850 MHz: 5 kW (+67) PEP; GSM: 2.8kW (+64.5) PEP DCS/UMTS: 2.8 kW (+64.5) PEP; PCS: 5 kW (+67) PEP

Average Power Handling (dBm)850 MHz: 500 watts (+57); 900 MHz: 350 watts (+55)

max. 350 watts (+55) max.

Rejection 50 dB minimum; 1710-2170 MHz 50 dB minimum; 824-960 MHz

Intermodulation (IM) (dBc) (Products, Max) -110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band

DC Bias/AISG Passthru (twin) -05: No Connection (DC Grounded)

-06: DC/AISG to issue 2.0 (connected all ports)

-07: DC/AISG to issue 2.0 (1710-2100 Port to

Antenna Port)

-08: DC/AISG to issue 2.0 (824-960 Port to

Antenna Port)

DC Bias/AISG Passthru (single) -01: No Connection (DC Grounded)

-02: DC/AISG to issue 2.0 (connected all ports)

-03: DC/AISG to issue 2.0 (1710-2100 Port to

Antenna Port)

-04: DC/AISG to issue 2.0 (824-960 Port to

Antenna Port)

Common+Port TMA supply voltage, fed via the RF cable, +31 V maximum, 2 A

Range (MHz) 824-2170

Filter Type Diplex Filter for 800/900 MHz and 1800/1900/2100

TECHNICAL SPECIFICATIONS

Frequency Range (Full Band MHz) 824-960 MHz/1710-2170 MHz

Return Loss (dB) 20 dB minimum 20 dB minimum

Insertion Loss (dB) <0.1 dB Typical <0.2 dB Typical

Frequency Range (MHz) 824-960 Port, 824-960 MHz 1710-2100 Port, 1710-2170 MHz

Housing Aluminum

Color Off White (NCS 1502-R)

Mounting_Kit Hose Clamps in Stainless Steel

RF Connectors DIN 7/16 female

Dimensions mm(in) 112 x 158 x 74 (4”x 6”x 3”)

MECHANICAL SPECIFICATIONS

Volume 1.3 liter single unit

Weight kg(lbs) 2.5 (5.5) maximum

Ingress Protection IP65, EN 60 529

Safety EN 60 950, UL 1950, ETL

EMC ETS 300 342-3

Environmental ETS 300 019

Temperature Range Celsius (Fahrenheit) -40°to +65°(-40°to +149°)

ENVIRONMENTAL SPECIFICATIONS

Lightning Protection According to IEC 61312-1, 3kA 10/350 uS;center pin (any port)-shield

MTBF 10 Million Hours

LGP219nn Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with Configurable DC Transparency

D031-08693C Updated: 2010-07-26 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

73

Page 75: Powerwave Product Catalog

Powerwave’s innovative outdoor enclosure and mobile platform solutions offer flexible combinations of density and serviceability through state of the art modular design and construction. Network operators around the world have made Powerwave’s enclosure and mobile platforms their premier choice for housing and deploying critical network infrastructure equipment.

Rapid Mobile Deployment and Enclosure Solutions

Power wave

MicroFlex™ Outdoor Enclosures

RapidFlex™ Mobile Deployment Unit

SubTerra™ Controlled Environment Vault

VersaFlex™ Shelter Solutions

Page 76: Powerwave Product Catalog

RMDU and Enclosures Solutions

POWERWAVE MicroFlex™ Outdoor Enclosures

Rapid Mobile Deployment and Enclosure Solutions MicroFlex Outdoor Enclosures

Title Part Number Page MicroFlex Low-Profile Enclosure for Backhaul and E911 Applications

MF0-004-000-002 77

MicroFlex 48RU Outdoor Enclosure MF0-048-000-001 78

76

Page 77: Powerwave Product Catalog

POWERWAVE MicroFlex

Finish TGIC Powdercoat, Color RAL 7035

Material High Strength High Strength Corrosion Resistant Aluminum Construction

GENERAL SPECIFICATIONS

MF0-004-000-002 MicroFlex Low-Profile Enclosure for Backhaul and E911 Applications

Weight kg(lbs) 40 (88) (baseline configuration)

Dimensions mm(in) 914 x 685 x 254 (36 x 27 x 10)

WEIGHTS & MEASURES

Audible Noise (db-A) 57.0 (not including installed equipment)

Thermal Electric Cooling Power 200W (calculated 190W @ dT = 0 degree C +/- 10%)

Wind m/s (mph) 67 (150)

ENVIRONMENTAL SPECIFICATIONSOperating Temperature -10°C to 50°C

CE

RoHS

IP55

COMPLIANCE (pending)GR487 CORE

UL50

Start-up Current (max.) 14.1A/7.0A @ +24VDC/-48VDC

Rated Current (max.) 11.3A/5.5A @ +24VDC/-48VDC

ELECTRICAL SPECIFICATIONS

Powerwave’s Microflex outdoor enclosure provides 4RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order with interchangeable options and accessories.

Updated: 2010-07-21 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

77

Page 78: Powerwave Product Catalog

POWERWAVE MicroFlex

Finish TGIC Powdercoat, Color RAL 7035

Material High Strength High Strength Corrosion Resistant Aluminum Construction

GENERAL SPECIFICATIONS

MF0-048-000-001 MicroFlex 48RU Outdoor Enclosure

Weight kg(lbs) 436 kg ( 961lbs) (Cabinet only, no equipment)

Dimensions mm(in) 2400mm H x 1755mm W x 817mm D (94.5in H x 70.0in W x 32.0in D)

WEIGHTS & MEASURES

Wind m/s (mph) 67 (150)

Audible Noise (db-A) 57.0 to 65 (depending on thermal management)

ENVIRONMENTAL SPECIFICATIONSOperating Temperature -50°C to 70°C (Internal temperature is dependant on equipment heat load and thermal management options)

CE

RoHS

IP55

COMPLIANCEGR487 CORE

UL50

Powerwave’s Microflex outdoor enclosure provides 48RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order with interchangeable options and accessories.

Updated: 2010-12-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

78

Page 79: Powerwave Product Catalog

RMDU and Enclosures Solutions

POWERWAVE RapidFlex™ Mobile Deployment Unit

Rapid Mobile Deployment and Enclosure Solutions RapidFlex Mobile Deployment Unit

Title Part Number Page RapidFlex Mobile Deployment Unit

CW0-000-000-003 80

79

Page 80: Powerwave Product Catalog

POWERWAVE RapidFlex

Diesel Generator,Weather Proof Sound Attenuated Enclosure Up to 50kW Diesel with optional extended run time fuel tank

Coax Real Up to (24) 1/2” Coax or (6) 7/8” Coax + 1” flexible conduit

12V Trailer End Connector 7-Way

Micro Footprint, Hydraulic Powered Outriggers Yes

Hydraulic Auto Leveling Yes

7-Bay Telecommunications Shelter Yes

Safety Chains Yes

Axle: Type Straight

Axle: Quantity Dual Tandem HD

GENERAL SPECIFICATIONS

Wheel Bolt Pattern 8 Bolt

Suspension Leaf

Brakes Electric

CW0-000-000-003 RapidFlex Mobile Deployment Unit (RMDU)

Curb Weight (lbs) 20,000

GVWR (lbs) 30,000

Hitch Ball Size Gooseneck 2 5/16”

Hitch Weight (lbs) 3,000

Tower Height (ft) 98’

Maximum Tower Loading (lbs) 650

GAWR (lbs) 15,000

Average Payload Capacity (lbs) 10,000

Trailer Length 34’

Travel Length 36’

WEIGHTS & MEASURESTrailer Width 7’6”

Platform Height 24”

Tire Size/Type 235-75R17.5

Overall Width 7’6”

Overall Height 13’ 6”

Operation and maintenance manuals

7-way electrical hook-up

Lockable tool box

Self-guy kit

Complete system grounding kit

Full-size spare tire

ACCESSORIES INCLUDED

Tire changing tool kit

Sealed beam DOT lighting package and reflective striping (complies w/ DOT Federal Motor Carrier safety regulations in all 50 states)

Safety pull-away chains

3-way antenna mount

Extended Run Double Wall Fuel Tank

Wireless Platform Access and Control, PDA

Wind Speed Anemometer

Heavy duty copper keeper

Automatic Transfer Switch

ADDITIONAL OPTIONS AVAILABLE

FAA aviation obstruction lighting kit

Extended Run Double Wall Fuel Tank

Updated: 2010-12-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

*All dimensions are nominal and specifications are subject to change without notice.

80

Page 81: Powerwave Product Catalog

RMDU and Enclosures Solutions

POWERWAVE SubTerra™ Controlled Environment Vault

Rapid Mobile Deployment and Enclosure Solutions SubTerra Controlled Environment Vault

Title Part Number Page

SubTerra Controlled Environment Vault CEV-000-000-001 82

81

Page 82: Powerwave Product Catalog

POWERWAVE SubTerra

Finish Brushed Aluminum

Material High Strength Fiberglass and High Strength Corrosion Resistant Aluminum Construction

GENERAL SPECIFICATIONS

CEV-000-000-001 SubTerra Controlled Environment Vault

Weight kg(lbs) 3401 (7500) (baseline configuration)

Dimensions mm(in) 3860 x 1955 x 3505 (152 x 77 x 138)

WEIGHTS & MEASURES

Wind m/s (mph) 67 (150)

Audible Noise (db-A) 57.0 to 65 (depending on thermal management options)

ENVIRONMENTAL SPECIFICATIONSOperating Temperature -40°C to 60°C (Internal temperature is dependant on equipment heat load and thermal management options)

CE

RoHS

Designed to IP55

COMPLIANCEDesigned to GR487 CORE

UL Listed

Powerwave’s Controlled Environment Vault provides 184RU of rack space in a compact foot print. The complete CEV product line is configured to order with interchangeable options and accessories.

Updated: 2010-12-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

82

Page 83: Powerwave Product Catalog

RMDU and Enclosures Solutions

POWERWAVE VersaFlex™ Shelter Solutions

Rapid Mobile Deployment and Enclosure Solutions VersaFlex Shelter Solutions

Title Dimensions (ft) Weight (lbs) Page

VersaFlex 7.0 High-Cube Outdoor Shelter 2591 x 3048 x 2286 mm (102 x 120 x 90) 1590 (3500) 84

VersaFlex 9.0 High-Cube Outdoor Shelter 2591 x 4191 x 2286 mm (102 x 165 x 90) 1814 (4000) 85

83

Page 84: Powerwave Product Catalog

POWERWAVE VersaFlex

HVAC 2x3 Ton

Weight lbs (kg) 4000 (1814)

Minimum Lease Required 10L x 7’6”W = 75 Sq. Ft. (3.05L x 2.29W = 6.98m2)

Radio Frames 7

Length ft (m) 10 (3.05)

SPECIFICATIONS

Height in (m) 8’6: (2.59)

Width ft (m) 7’6” (2.29)

VersaFlex (7 Bay) VersaFlex Enclosure Solutions

Note: Weights and lengths are approximate measurements and will vary based on specific customer requirements.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

VersaFlex (7 Bay) Enclosure

Key Features/Benefits:

. Sliding door design reduces lease area requirements by eliminating door swing.

. Sliding equipment racks that reduce floor space required and utilizes a rolling cable tray

. Internal sub-floor HVAC system that eliminates hot spots.

. Utilizes approximately half the space of traditional Shelters.

. Standard weighs only 4,000 lbs (1814 kg) vs. the 30,000 (13608 kg) to 50,000 lbs (22680 kg) of traditional shelters.

D031-08439 Rev. D 07/08 Updated: 2010-07-21 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

84

Page 85: Powerwave Product Catalog

POWERWAVE VersaFlex

HVAC 2x5 Ton

Weight lbs (kg) 4750 (2155)

Minimum Lease Required 13’9”L x 7’6”W = 103.1 Sq. Ft (4.19L x 2.29W = 9.60m2)

Radio Frames 9

Length ft (m) 13’9” (4.19)

SPECIFICATIONS

Height in (m) 8’6: (2.59)

Width ft (m) 7’6” (2.29)

VersaFlex (9 Bay) VersaFlex Enclosure Solutions

Note: Weights and lengths are approximate measurements and will vary based on specific customer requirements.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

VersaFlex (9 Bay) Enclosure

Key Features/Benefits:

. Sliding door design reduces lease area requirements by eliminating door swing.

. Sliding equipment racks that reduce floor space required and utilizes a rolling cable tray

. Internal sub-floor HVAC system that eliminates hot spots.

. Utilizes approximately half the space of traditional Shelters.

. Standard weighs only 4,000 lbs (1814 kg) vs. the 30,000 (13608 kg) to 50,000 lbs (22680 kg) of traditional shelters.

D031-08439 Rev. D 07/08 Updated: 2010-07-21 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

85

Page 86: Powerwave Product Catalog

RMDU and Enclosure Solutions

POWERWAVE Rapid Mobile Deployment and Enclosure Solutions

Page

MicroFlex™ Outdoor Enclosures 76 RapidFlex™ Mobile Deployment Unit 79 SubTerra™ Controlled Environment Vault 81 VersaFlex™ Shelter Solutions 83

75

Page 87: Powerwave Product Catalog

Repeater Products

In-Building and Outdoor DAS Products

Repeater Remote Management Products

Powerwave’s Coverage products include turn- key coverage and capacity products and solutions that give network operators, facilities owners and neutral hosts an edge over the competition. We specialize in innovative products and solutions from the simplest to the most challenging indoor and outdoor environments that help improve coverage, signal quality and capacity. Our efficient, modular and integrated solutions drive down capital and operating expenses.

Coverage ProductsPower wave

Page 88: Powerwave Product Catalog

Coverage Products

POWERWAVE Coverage Products

Repeater Products PageChannel Selective Standard Repeaters 89 Band Selective Compact Repeaters 113 Band Selective Standard Repeaters 144 Advanced Train Repeaters 157 Digital Repeaters 162

In-Building and Outdoor DAS Products, Public Safety Networks PageBi-Directional Amplifiers 167 LinkNet™ Convergence Platform 170 Optical and RF Conversion Modules 178 Tap-In® Signal Taps 179 Nexus™FT - Public Safety 181 In-Building and Outdoor DAS Products, Commercial PageWide Band Radio Heads 183 Nexus FT Single and Dual Band 186 Nexus FT Rack Mounts 221 Repeater Remote Management PageIP/SNMP/GPS Repeater Remote Management Interface 226

87

Page 89: Powerwave Product Catalog

Repeater products provide cost-effective coverage solutions for airports, railway stations, tunnels, convention centers, canyons and other environments where structures or natural obstructions interfere with signals. What sets Powerwave repeater products apart is our exceptionally low total lifetime cost. This is due to a number of factors. Our high level of integration delivers a compact form factor that eliminates/minimizes site rental costs.

Channel Selective Standard Repeaters

Band Selective Compact Repeaters

Band Selective Standard Repeaters

Advanced Train Repeaters

Digital Repeaters

Repeater ProductsPower wave

Page 90: Powerwave Product Catalog

Coverage Products

POWERWAVE Channel Selective Standard Repeaters

Repeater Products

Title Range (MHz) No. of Channels Bandwidth Part Number Page Upgrade Standard Channel Selective,1800 MHz

GSM 4 200 KHz/channel AR0027/50409 91

Upgrade Standard Channel Selective,2100 MHz

GSM 2 200 KHz/channel AR0065/00109 92

Standard Channel Selective, 900 MHz RGSM 2 or 4 200 KHz/channel AR1700/80 93

Standard Channel Selective, 900 MHz EGSM 4 200 KHz/channel AR1700/90419 94

Standard Channel Selective, 900 MHz EGSM 4 200 KHz/channel AR1700/90409 95

Standard Channel Selective, 900 MHz EGSM 2 200 KHz/channel AR1700/90209 96

Standard Channel Selective, 900 MHz GSM 6 200 KHz/channel AR1717/90609 97

Standard Channel Selective, 1800 MHz GSM 2 200 KHz/channel AR2700/50209 98

Standard Channel Selective, 1800 MHz GSM 4 200 KHz/channel AR2700/50409 99

Standard Channel Selective, 1800 MHz GSM 6 200 KHz/channel AR2727/50609 100

Standard Channel Selective,1900 MHz GSM 4 200 KHz/channel AR3700/50409 101

Standard Channel Selective, 2100 MHz WCDMA 2 4.4 MHz/channel AR6500/00109 102

Standard Dual Band Channel Selective, 2100MHz

WCDMA2100 2 4.4 MHz/channel AR6512/00239 103

Standard Repeater Dual Band Channel Selective, 2100MHz

WCDMA2100 2 4.4 MHz/channel AR6512/00229 104

Standard Dual Band Channel Selective, 2100MHz

WCDMA2100 2 4.4 MHz/channel AR6517/01429 105

Standard Channel Selective, 2100 MHz WCDMA2100 2 200 KHz/channel AR6517/01439 106

89

Page 91: Powerwave Product Catalog

Coverage Products

POWERWAVE Channel Selective Standard Repeaters

Repeater Products

Title Range (MHz) No. of Channels Bandwidth Part Number Page Standard Channel Selective, 2100 MHz WCDMA2100 2 200 KHz/channel AR6517/01429 107

Standard Channel Selective, 2100 MHz WCDMA2100 2 200 KHz/channel AR6517/01459 108

Standard Channel Selective, 2100 MHz WCDMA2100 1 to 2 200 KHz/channel AR6522/01100 109

Dual Band Channel Selective 2100/1800 WCDMA2100 1 to 2 4.4 MHz/channel AR6522/01109 110

Dual Band Channel Selective, 2100 MHz WCDMA2100 2 4.4 MHz/channel AR6522/91100 111

Standard Channel Selective, 2100 MHz WCDMA2100 2 4.4 MHz/channel AR6560/00209 112

90

Page 92: Powerwave Product Catalog

AR0027/50409 Upgrade Standard Repeater Channel Selective 1800MHz GSM, 4CH, Stand Alone, Seperated Donor/Service

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range N/A 55 to 90 dB

Output Power UL N/A +28 dBm/channel

Output Power DL N/A +28 dBm/channel

Noise Figure N/A 4 dB

EVM

ACCR

Group Delay N/A 6 µs

Range N/A GSM1800

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) N/A 1710-1785

Bandwidth (MHz) N/A 200 KHz/channel

No. of Channels N/A 4

Frequency Band DL (MHz) N/A 1805-1880

Power Supply (Optional) N/A N/A

Power Consumption N/A 250 W

Power Supply N/A 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) N/A 440 x 530 x 195 (1’5”x1’9”x8”)

Weight kg (lbs) N/A 22 (48)

RF Connection N/A N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) N/A -13 to +131 (-25 to +55)Housing Specification N/A NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio N/A TS 45.005

Regulatory Compliance EMC N/A EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes: *Stand alone

Updated: 2010-12-08 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic N/A N/A

Fallback Circuit Switched Mode N/A N/A

Remote Management N/A N/A

Maintenance N/A N/A

Packet Data Mode N/A N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies N/A N/A

Type N/A N/A

91

Page 93: Powerwave Product Catalog

AR0065/00109UPGRADE STANDARD REPEATER CHANNEL SELECTIVE 2100MHz WCDMA, 2CH, STAND ALONE, SEPARATE DONOR AND SERVICE

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range N/A 55 to 85 dB

Output Power UL N/A 2ch +15 dBm/channel

Output Power DL N/A 2ch +25 dBm/channel

Noise Figure N/A DL 6 dBUL 4 dB

EVM N/A

ACCR N/A

Group Delay N/A 6 µs

Range N/A WCDMA 2100

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) N/A 1920 -1980

Bandwidth (MHz) N/A 4.4 channel

No. of Channels N/A 2

Frequency Band DL (MHz) N/A 2110 - 2170

Power Supply (Optional) N/A N/A

Power Consumption N/A 160 W

Power Supply N/A 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) N/A 440 x 530 x 195 (1’5”x1’9”x8”)

Weight kg (lbs) N/A 22 (48)

RF Connection N/A N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) N/A -13 to +131 (-25 to +55)Housing Specification N/A NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio N/A TS 125 106

Regulatory Compliance EMC N/A TS 125 113

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes: *Stand alone

Updated: 2010-12-08 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic N/A N/A

Fallback Circuit Switched Mode N/A N/A

Remote Management N/A N/A

Maintenance N/A N/A

Packet Data Mode N/A N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies N/A N/A

Type N/A N/A

92

Page 94: Powerwave Product Catalog

AR1700/80 Standard Channel Selective, GSM-R 900MHz

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) 2ch: +33 dBm/channel, 4ch: +29 dBm/channel

EVM

ACCR

Group Delay 5 µs

Output Power DL (min) 2ch: +33 dBm/channel, 4ch: +29 dBm/channel

Frequency Band UL (MHz) 876-880

Range GSM-R

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 2 or 4

Frequency Band DL (MHz) 921-925

Power Supply (Optional) 21-60 VDC (optional)Power Consumption 2ch: 160W, 4ch: 250W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female (7/16 option)

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-08

Northbound Traffic

Fallback Circuit Switched Mode

Remote ManagementMaintenance

Type

REMOTE CONTROL

Packet Data Mode

Wireless MOD EM Frequencies

93

Page 95: Powerwave Product Catalog

AR1700/90419 STANDARD CH SEL REPEATER 900MHz EGSM,4CH,AC PSU,7/16 CON,GSM/GPRS REMOTE CONTROL,DOOR SW,LOCK-KEYS

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +29 dBm/channel

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +29 dBm/channel

Frequency Band UL (MHz) 880-915

Range EGSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 4

Frequency Band DL (MHz) 925-960

Power Supply (Optional) N/APower Consumption 250W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195[280] (1’5”x1’9”x8” [11”])

Weight kg (lbs) 22[37]

MECHANICAL DATA*RF Connection 7/16-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-14

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

94

Page 96: Powerwave Product Catalog

AR1700/90409 STANDARD CH SEL REPEATER 900MHz EGSM, 4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +29 dBm/channel

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +29 dBm/channel

Frequency Band UL (MHz) 880-915

Range EGSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 4

Frequency Band DL (MHz) 925-960

Power Supply (Optional) N/APower Consumption 250W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195[280] (1’5”x1’9”x8” [11”])

Weight kg (lbs) 22[37]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-14

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

95

Page 97: Powerwave Product Catalog

AR1700/90209 STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +33 dBm/channel

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +33 dBm/channel

Frequency Band UL (MHz) 880-915

Range EGSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 2

Frequency Band DL (MHz) 925-960

Power Supply (Optional) N/APower Consumption 160W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195[280] (1’5”x1’9”x8” [11”])

Weight kg (lbs) 22[37]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-08

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

96

Page 98: Powerwave Product Catalog

AR1717/90609 STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +26 dBm/channel

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +26 dBm/channel

Frequency Band UL (MHz) 880-915

Range EGSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 6

Frequency Band DL (MHz) 925-960

Power Supply (Optional) N/APower Consumption 410W (2 Separate PSU’s)

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195[280] (1’5”x1’9”x8” [11”])

Weight kg (lbs) 48[82]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-08

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

97

Page 99: Powerwave Product Catalog

AR2700/50209 STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +32 dBm

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +32 dBm

Frequency Band UL (MHz) 1710-1785

Range GSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 2

Frequency Band DL (MHz) 1805-1880

Power Supply (Optional) N/APower Consumption 160W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22[37]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-08

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWV 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

98

Page 100: Powerwave Product Catalog

AR2700/50409 STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +28 dBm/channel

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +28 dBm/channel

Frequency Band UL (MHz) 1710-1785

Range GSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 4

Frequency Band DL (MHz) 1805-1880

Power Supply (Optional) N/APower Consumption 160W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22[37]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-14

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWV 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

99

Page 101: Powerwave Product Catalog

AR2727/50609 STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +25 dBm/channel

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +25 dBm/channel

Frequency Band UL (MHz) 1710-1785

Range GSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 6

Frequency Band DL (MHz) 1805-1880

Power Supply (Optional) N/APower Consumption 410W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x280 (1’5”x1’9”x11”)

Weight kg (lbs) (48[82])

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-08

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

100

Page 102: Powerwave Product Catalog

AR3700/50409 STANDARD CHANNEL SELECTIVE REPEATER 1900MHz GSM, 4CH, 850/1900 MHz GSM/GPRS REMOTE CONTROL, DOOR SW,LOCK-KEYS

POWERWAVE Channel Selective Standard Repeaters

Noise Figure 4 dB

Gain adjustment range 55 to 90 dB

Output Power UL (min) +28 dBm/channel

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +28 dBm/channel

Frequency Band UL (MHz) 1850-1910

Range GSM

ELECTRICAL DATA*

Bandwidth 200 KHz/channel

No. of Channels 4

Frequency Band DL (MHz) 1930-1990

Power Supply (Optional) NAPower Consumption 4ch: 250W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22(48)

MECHANICAL DATA*RF Connection N-female (7/16 option)

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-08

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 850/1900 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 850 / 1900 MHz

101

Page 103: Powerwave Product Catalog

AR6500/00109 Standard Channel Selective Repeater 2100MHz WCDMA, 2Channel, GSM/GPRS REMOTE CONTROL, DOOR Switch

POWERWAVE Channel Selective Standard Repeaters

Noise Figure DL 6 dB, UL 4 dB

Gain adjustment range DL 55 to 85 dB, UL 55 to 85 dB

Output Power UL (min) +15 dBm/channel

EVM

ACCR

Group Delay 6 µs

Output Power DL (min) +25 dBm channel

Frequency Band UL (MHz) 1920 -1980

Range WCDMA

ELECTRICAL DATA*

Bandwidth 4.4 MHz/channel

No. of Channels 2ch

Frequency Band DL (MHz) 2110 - 2170

Power Supply (Optional) NAPower Consumption 160 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22[37]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC TS 125 113

Regulatory Compliance Radio TS 125 106

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-08

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

102

Page 104: Powerwave Product Catalog

AR6512/00239Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS REM CTRL, Separated Donor and Combined Service, Door Switch

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 85 dB

Output Power UL +15 dBm/channel +26 dBm composite

Output Power DL +24 dBm channel +25 dBm composite

Noise Figure UL 5 dB, DL 7 dB 6 dB

EVM

ACCR

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 890-915

Bandwidth (MHz) 4.4 channel 25 MHz

No. of Channels 2ch Band Selective

Frequency Band DL (MHz) 2110 - 2170 935-960

Power Supply (Optional) NA NA

Power Consumption 160 W 200W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232

Packet Data Mode GPRS and IP Ethernet

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

103

Page 105: Powerwave Product Catalog

AR6512/00229Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 85 dB

Output Power UL +14 dBm/channel 24 dBm composite

Output Power DL +24 dBm/channel 24 dBm composite

Noise Figure UL 6 dB, DL 8 dB 7 dB

EVM

ACCR

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 890-915

Bandwidth (MHz) 4.4 channel 25 MHz

No. of Channels 2ch Broad band

Frequency Band DL (MHz) 2110 - 2170 925-960

Power Supply (Optional) NA NA

Power Consumption 160 W 200W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http NA

Fallback Circuit Switched Mode GSM NA

Remote Management NWM 3.2.2 and greater; local web interface NA

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 NA

Packet Data Mode GPRS and IP Ethernet NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz NA

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface NA

104

Page 106: Powerwave Product Catalog

AR6517/01429Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 90 dB

Output Power UL +14 dBm/channel N/A

Output Power DL +24 dBm/channel +28 dBm/channel

Noise Figure UL 6 dB DL 8 dB 5 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 890 - 915

Bandwidth (MHz) 4.4 channel 200 KHz/channel

No. of Channels 2ch 4ch

Frequency Band DL (MHz) 2110 - 2170 935 - 960

Power Supply (Optional) NA NA

Power Consumption 160 W 250W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http NA

Fallback Circuit Switched Mode GSM NA

Remote Management NWM 3.2.2 and greater; local web interface NA

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 NA

Packet Data Mode GPRS and IP Ethernet NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz NA

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface NA

105

Page 107: Powerwave Product Catalog

AR6517/01439Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Separated Donor and Combined Service, Door Switch

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 90 dB

Output Power UL +15 dBm/channel +29 dBm/channel

Output Power DL +24 dBm/channel +28 dBm/channel

Noise Figure UL 5 dB DL 7 dB 4 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 890 - 915

Bandwidth (MHz) 4.4 channel 200 KHz/channel

No. of Channels 2ch 4ch

Frequency Band DL (MHz) 2110 - 2170 935 - 960

Power Supply (Optional) NA NA

Power Consumption 160 W 250W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http NA

Fallback Circuit Switched Mode GSM NA

Remote Management NWM 3.2.2 and greater; local web interface NA

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 NA

Packet Data Mode GPRS and IP Ethernet NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz NA

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface NA

106

Page 108: Powerwave Product Catalog

AR6517/01429Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 90 dB

Output Power UL +14 dBm/channel N/A

Output Power DL +24 dBm/channel +28 dBm/channel

Noise Figure UL 6 dB DL 8 dB 5 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 890 - 915

Bandwidth (MHz) 4.4 channel 200 KHz/channel

No. of Channels 2ch 4ch

Frequency Band DL (MHz) 2110 - 2170 935 - 960

Power Supply (Optional) NA NA

Power Consumption 160 W 250W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http NA

Fallback Circuit Switched Mode GSM NA

Remote Management NWM 3.2.2 and greater; local web interface NA

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 NA

Packet Data Mode GPRS and IP Ethernet NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz NA

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface NA

107

Page 109: Powerwave Product Catalog

AR6517/01459

Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Channels / 900MHz EGSM, 4Channels, AC PSU, 7/16 Connectors, GSM/GPRS REM CTRL, Separated Donor and Combined Service, DOOR Switch, LOCK-KEYS

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 90 dB

Output Power UL +15 dBm/channel +29 dBm/channel

Output Power DL +24 dBm channel +28 dBm/channel

Noise Figure UL 5 dB DL 7 dB 4 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 890 - 915

Bandwidth (MHz) 4.4 channel 200 KHz/channel

No. of Channels 2ch 4ch

Frequency Band DL (MHz) 2110 - 2170 935 - 960

Power Supply (Optional) NA NA

Power Consumption 160 W 250W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection 7/16 female 7/16 female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http NA

Fallback Circuit Switched Mode GSM NA

Remote Management NWM 3.2.2 and greater; local web interface NA

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 NA

Packet Data Mode GPRS and IP Ethernet NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz NA

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface NA

108

Page 110: Powerwave Product Catalog

AR6522/01100 Dual Band 2100/1800LB Channel Selective/Band Selective

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 85 dB

Output Power UL 1ch +20 dBm/channel, 2ch +15 dBm/channel 29 dBm composit

Output Power DL 1ch +30 dBm/channel, 2ch +25 dBm/channel 29 dBm composit

Noise Figure UL 5 dBDL 7 dB 6 dB

EVM

ACCR

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 1800 LB

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 1710-1765

Bandwidth (MHz) 4.4 channel 16.9 MHz

No. of Channels 1 to 2 Broad band

Frequency Band DL (MHz) 2110 - 2170 1805-1860

Power Supply (Optional) 21-60 VDC (optional) 21-60 VDC (optional)

Power Consumption 160 W 200W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female (7/16 option) N-female (7/16 option)

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF increase 1dB

Updated: 2010-12-08 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic

Fallback Circuit Switched Mode

Remote Management

Maintenance

Packet Data Mode

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies

Type

109

Page 111: Powerwave Product Catalog

AR6522/01109

Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 1800MHz GSM Low Band, 16.9MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 85 dB

Output Power UL +14 dBm/channel 28 dBm composite

Output Power DL +24 dBm/channel 28 dBm composite

Noise Figure UL 6 dB DL 8 dB 7 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 1800 LB

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 1710-1765

Bandwidth (MHz) 4.4 channel 16.9 MHz

No. of Channels 2ch Band Selective

Frequency Band DL (MHz) 2110 - 2170 1805-1860

Power Supply (Optional) NA NA

Power Consumption 160 W 200W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-12-08 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232

Packet Data Mode GPRS and IP Ethernet

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

110

Page 112: Powerwave Product Catalog

AR6522/91100 Dual Band 2100/1800LB Channel Selective/Band Selective

POWERWAVE Channel Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 85 dB

Output Power UL 1ch +20 dBm/channel, 2ch +15 dBm/channel 29 dBm composit

Output Power DL 1ch +30 dBm/channel, 2ch +25 dBm/channel 29 dBm composit

Noise Figure UL 5 dBDL 7 dB 6 dB

EVM

ACCR

Group Delay 6 µs 6 µs

Range WCDMA2100 GSM 1800 UB

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 1730-1785

Bandwidth (MHz) 4.4 channel 16.9 MHz

No. of Channels 1 to 2 Broad band

Frequency Band DL (MHz) 2110 - 2170 1825-1880

Power Supply (Optional) 21-60 VDC (optional) 21-60 VDC (optional)

Power Consumption 160 W 200W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female (7/16 option) N-female (7/16 option)

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF increase 1dB

Updated: 2010-12-08 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic

Fallback Circuit Switched Mode

Remote Management

Maintenance

Packet Data Mode

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies

Type

111

Page 113: Powerwave Product Catalog

AR6560/00209 Standard Channel Selective Repeater 2100MHz WCDMA, 2Ch, High Power, GSM/GPRS REMOTE CONTROL, Door Switch

POWERWAVE Channel Selective Standard Repeaters

Noise Figure DL 6 dB, UL 4 dB

Gain adjustment range DL 65 to 95 dB, UL 55 to 85 dB

Output Power UL (min) +15 dBm/channel

EVM

ACCR

Group Delay 6 µs

Output Power DL (min) +32 dBm/channel

Frequency Band UL (MHz) 1920 -1980

Range WCDMA2100

ELECTRICAL DATA*

Bandwidth 4.4 MHz/channel

No. of Channels 2ch

Frequency Band DL (MHz) 2110 - 2170

Power Supply (Optional) NAPower Consumption 320W (2 separate PSU)

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195[280] (1’5”x1’9”x8” [11”])

Weight kg (lbs) 48[82]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC TS 125 113

Regulatory Compliance Radio TS 125 106

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-09

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

112

Page 114: Powerwave Product Catalog

Coverage Products

POWERWAVE Band Selective Compact Repeaters

Repeater Products

Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page Compact Repeater Band Selective, 2100 MHz

WCDMA Band selective 0.5 to 15 ALR0062/00109 116

Compact Band Selective, 900 MHz

GSM, HSPA+, LTE Band selective 0.5 to 25 ALR1200/90209 117

Compact Band Selective, 900 MHz

GSM, HSPA+, LTE Band selective 0.5 to 25 ALR1200/00209 118

Dual Cell Compact Repeater, 900 MHz GSM Broad band 0.5 to 15 ALR1212/00102 119

Dual Cell Compact Repeater, 900 MHz

GSM, HSPA+, LTE Band selective 0.5 to 25 ALR1212/00209 120

Compact Band Selective, 1800 MHz

GSM, HSPA+, LTE Band selective 0.5 to 25 ALR2200/00209 121

Compact Band Selective, 1800 MHz

GSM, HSPA+, LTE Band selective 0.5 to 25 ALR2200/90209 122

Dual Band Compact Repeater, 1800MHz

GSM, HSPA+, LTE Band selective 0.5 to 15 ALR2212/00119 123

Dual Band Compact Repeater, 1800MHz

GSM, HSPA+, LTE Band selective 0.5 to 15 ALR2212/00129 124

Dual Band Compact Repeater, 1800MHz

GSM, HSPA+, LTE Band selective 0.5 to 15 ALR2222/00109 125

Compact Band Selective, 1900MHz TDMA Broad band 0.5 to 15 ALR3200/00 126

Compact Band Selective, 1900MHz TDMA Band selective 0.5 to 15 ALR3200/00109 127

Compact Band Selective, 1900MHz CDMA Band selective 0.5 to 15 ALR3200/01109 128

113

Page 115: Powerwave Product Catalog

Coverage Products

POWERWAVE Band Selective Compact Repeaters

Repeater Products

Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page

Compact Band Selective, 1900MHz TDMA Band selective 0.5 to 15 ALR3200/90109 129

Compact Band Selective, 1900MHz CDMA Broad band 0.5 to 15 ALR3200/91109 130

Compact Dual Band Repeater, 1900MHz CDMA Band selective 0.5 to 15 ALR3232/51109 131

Compact Dual Band Repeater, 1900MHz CDMA Band selective 0.5 to 15 ALR3242/03039 132

Compact Dual Band Repeater, 1900MHz CDMA Band selective 0.5 to 15 ALR3246/00309 133

Compact Dual Band Repeater, 800MHz TDMA Band selective 0.5 to 15/25 ALR4200/00209 134

Compact Dual Band Repeater, 850MHz CDMA Band selective 0.5 to 15 ALR4200/01109 135

Compact Dual Band Repeater, 850MHz CDMA Band selective 0.5 to 25 ALR4200/01209 136

Compact Band Selective, 850MHz CDMA Broad band 0.5 to 25 ALR4600/00109 137

Compact Band Selective, 850MHz iDEN Band selective 0.5 to 15 ALR4600/00119 138

Compact Band Selective, 800MHz iDEN Band selective 0.5 to 18 ALR4600/00209 139

Compact Band Selective, 2100MHz

WCDMA, HSPA+, LTE Band selective 0.5 to 15 ALR6200/00109 140

Compact Dual Band 900/2100 WCDMA Band selective 0.5 to 15 ALR6212/90129 141

114

Page 116: Powerwave Product Catalog

Coverage Products

POWERWAVE Band Selective Compact Repeaters

Repeater Products

Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page

Dual Band Compact, 900/2100MHz WCDMA Broad band 0.5 to 15 ALR6212/90139 142

Compact In-train Band Selective, 900 MHz

GSM, HSPA+, LTE Broad band 0.5 to 25 ALT1200/00209 143

115

Page 117: Powerwave Product Catalog

ALR0062/00109 UPGRADE COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA, BW15MHz, STAND ALONE, SEPARATED DONOR/SERVICE

POWERWAVE Band Selective Compact Repeaters

Noise Figure DL 5 dB, UL 3 dB

Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)

Output Power UL (min) +20 dBm Composite

EVM < 6.7% (LTE)

ACCR -51 dB (LTE)

Group Delay 6 µs

Output Power DL (min) +24 dBm Composite

Frequency Band UL (MHz) 1920-1980

Range WCDMA, HSPA+, LTE

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 2110-2170

Power Supply (Optional) 21-60 VDCPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x55 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC TS 125.113

Regulatory Compliance Radio TS 125.106

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic NA

Fallback Circuit Switched Mode NA

Remote Management NA

Maintenance NA

Type NA

REMOTE CONTROL*

Packet Data Mode NA

Wireless MOD EM Frequencies NA

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

116

Page 118: Powerwave Product Catalog

ALR1200/90209 COMPACT REPEATER BAND SELECTIVE 900MHz EGSM, BW25MHz, GSM/GPRS REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)

Output Power UL (min) +22 dBm Composite

EVM < 6.7% (LTE)

ACCR -51 dB (LTE)

Group Delay 6 µs

Output Power DL (min) +22 dBm Composite

Frequency Band UL (MHz) 880-905

Range GSM, HSPA+, LTE

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 925-950

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL*

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

117

Page 119: Powerwave Product Catalog

ALR1200/00209 COMPACT REPEATER BAND SELECTIVE 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)

Output Power UL (min) +22 dBm Composite

EVM < 6.7% (LTE)

ACCR -51 dB (LTE)

Group Delay 6 µs

Output Power DL (min) +22 dBm Composite

Frequency Band UL (MHz) 890-915

Range GSM, HSPA+, LTE

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 935-960

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL*

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

118

Page 120: Powerwave Product Catalog

ALR1212/00102Dual Cell Compact Repeater GSM900, BW 15 MHz / GSM900, BW 15 MH with Wireless and Ethernet Remote Management, Combined service and donor ports

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +22 dBm Composit +22 dBm Composite

Output Power DL +22 dBm Composite +22 dBm Composite

Noise Figure 8 dB 8 dB

EVM

ACCR

Group Delay 6 µs 6 µs

Range GSM 900 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 890-915 890-915

Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz

No. of Channels Broad band Broad band

Frequency Band DL (MHz) 935-960 935-960

Power Supply (Optional) 21-60 VDC (optional) 21-60 VDC (optional)

Power Consumption 60W 60W

Power Supply 85-265 VAC 85-265 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) 8 (18)

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 45.005 TS 45.005

Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes: The combined output power at the service port is 3dB lower than the nominal output power for each repeater cell.

Updated: 2010-11-29 © Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic

Fallback Circuit Switched Mode

Remote Management

Maintenance

Packet Data Mode

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies

Type

119

Page 121: Powerwave Product Catalog

ALR1212/00209COMPACT REPEATER DUAL CELL 900MHz GSM, 25MHz BW/900MHz GSM, 25MHz BW, GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND SERVICE

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +19 dBm Composite (Combined donor ports) +19 dBm Composite (Combined donor ports)

Output Power DL +19 dBm Composite (Combined service ports) +19 dBm Composite (Combined service ports)

Noise Figure 8 dB 8 dB

EVM < 6.7% (LTE) < 6.7% (LTE)

ACCR -51 dB (LTE) -51 dB (LTE)

Group Delay 6 µs 6 µs

Range GSM, HSPA+, LTE GSM, HSPA+, LTE

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 890-915 890-915

Bandwidth (MHz) 0.5 to 25 MHz 0.5 to 25 MHz

No. of Channels Band Selective Band Selective

Frequency Band DL (MHz) 935-960 935-960

Power Supply (Optional) N/A N/A

Power Consumption 60W 60W

Power Supply 85-265 VAC 85-265 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N/A

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 45.005 TS 45.005

Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http N/A

Fallback Circuit Switched Mode GSM N/A

Remote Management NWM 3.2.2 and greater; local web interface N/A

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 N/A

Packet Data Mode GPRS and IP Ethernet N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz N/A

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface N/A

120

Page 122: Powerwave Product Catalog

ALR2200/00209 COMPACT REPEATER BAND SELECTIVE 1800MHz GSM LB, BW25MHz, GSM/GPRS REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)

Output Power UL (min) +23 dBm Composite

EVM < 6.7% (LTE)

ACCR -51 dB (LTE)

Group Delay 6 µs

Output Power DL (min) +23 dBm Composite

Frequency Band UL (MHz) 1710-1765

Range GSM, HSPA+, LTE

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1805-1860

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x7” )

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL*

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

121

Page 123: Powerwave Product Catalog

ALR2200/90209 COMPACT REPEATER BAND SELECTIVE 1800MHz GSM UB, BW25MHz, GSM/GPRS REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)

Output Power UL (min) +23 dBm Composite

EVM < 6.7% (LTE)

ACCR -51 dB (LTE)

Group Delay 6 µs

Output Power DL (min) +23 dBm Composite

Frequency Band UL (MHz) 1730-1785

Range GSM, HSPA+, LTE

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1825-1880

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x7” )

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL*

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

122

Page 124: Powerwave Product Catalog

ALR2212/00119COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz, 15/15MHz BW, GSM/GPRS REM CTRL, SEPARATED DONOR/SERVICE

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +23 dBm Composite +22 dBm Composite

Output Power DL +23 dBm Composite +22 dBm Composite

Noise Figure 8 dB 8 dB

EVM < 6.7% (LTE) < 6.7% (LTE)

ACCR -51 dB (LTE) -51 dB (LTE)

Group Delay 6 µs 6 µs

Range GSM, HSPA+, LTE GSM, HSPA+, LTE

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1710-1765 890-915

Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz

No. of Channels Band Selective Band Selective

Frequency Band DL (MHz) 1805-1860 935-960

Power Supply (Optional) N/A N/A

Power Consumption 60W 60W

Power Supply 85-265 VAC 85-265 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N/A

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 45.005 TS 45.005

Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http N/A

Fallback Circuit Switched Mode GSM N/A

Remote Management NWM 3.2.2 and greater; local web interface N/A

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 N/A

Packet Data Mode GPRS and IP Ethernet N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz N/A

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface N/A

123

Page 125: Powerwave Product Catalog

ALR2212/00129COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz, 15/15MHz BW, GSM/GPRS REM CTRL, COMBINED DONOR/SERVICE

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +22 dBm Composite +21 dBm Composite

Output Power DL +22 dBm Composite +21 dBm Composite

Noise Figure 8 dB 8 dB

EVM < 6.7% (LTE) < 6.7% (LTE)

ACCR -51 dB (LTE) -51 dB (LTE)

Group Delay 6 µs 6 µs

Range GSM, HSPA+, LTE GSM, HSPA+, LTE

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1710-1765 890-915

Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz

No. of Channels Band Selective Band Selective

Frequency Band DL (MHz) 1805-1860 935-960

Power Supply (Optional) N/A N/A

Power Consumption 60W 60W

Power Supply 85-265 VAC 85-265 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N/A

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 45.005 TS 45.005

Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http N/A

Fallback Circuit Switched Mode GSM N/A

Remote Management NWM 3.2.2 and greater; local web interface N/A

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 N/A

Packet Data Mode GPRS and IP Ethernet N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz N/A

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface N/A

124

Page 126: Powerwave Product Catalog

ALR2222/00109Compact Repeater Dual Cell 1800MHz GSM LB, 15MHz BW/1800MHz GSM LB, 15MHz BW, GSM/GPRS Remote Control, Combined Donor And Service

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +20 dBm Composite (Combined donor ports) +20 dBm Composite (Combined donor ports)

Output Power DL +20 dBm Composite (Combined service ports) +20 dBm Composite (Combined service ports)

Noise Figure 8 dB 8 dB

EVM < 6.7% (LTE) < 6.7% (LTE)

ACCR -51 dB (LTE) -51 dB (LTE)

Group Delay 6 µs 6 µs

Range GSM, HSPA+, LTE GSM, HSPA+, LTE

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1710-1765 1710-1765

Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz

No. of Channels Band Selective Broad band

Frequency Band DL (MHz) 1805-1860 1805-1860

Power Supply (Optional) N/A N/A

Power Consumption 60W 60W

Power Supply 85-265 VAC 85-265 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N/A

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 45.005 TS 45.005

Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes: The combined output power at donor and service port is 3dB lower than the nominal output power for each repeater cell.

Updated: 2010-11-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http N/A

Fallback Circuit Switched Mode GSM N/A

Remote Management NWV 3.2.2 and greater; local web interface N/A

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 N/A

Packet Data Mode GPRS and IP Ethernet N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz N/A

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface N/A

125

Page 127: Powerwave Product Catalog

ALR3200/00 Compact Band Selective, 1900 MHz

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +25 dBm Composit

EVM

ACCR

Group Delay 6 µs

Output Power DL (min) +25 dBm Composit

Frequency Band UL (MHz) 1850-1890

Range TDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Broad band

Frequency Band DL (MHz) 1930-1970

Power Supply (Optional) 21-60 VDC (optional)Power Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 24

Regulatory Compliance Radio FCC Rule 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic

Fallback Circuit Switched Mode

Remote ManagementMaintenance

Type

REMOTE CONTROL*

Packet Data Mode

Wireless MOD EM Frequencies

Updated: 2010-01-07 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

126

Page 128: Powerwave Product Catalog

ALR3200/00109 COMPACT REPEATER BAND SELECTIVE 1900MHz GSM LB, BW15MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +25 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +25 dBm Composite

Frequency Band UL (MHz) 1850-1890

Range TDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1930-1970

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 24

Regulatory Compliance Radio FCC Rule 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic NA

Fallback Circuit Switched Mode NA

Remote Management NWM 3.2.2 and greater

Maintenance NA

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode NA

Wireless MOD EM Frequencies NA

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

127

Page 129: Powerwave Product Catalog

ALR3200/01109 COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA LB, BW15MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +23 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +26 dBm Composite

Frequency Band UL (MHz) 1850-1890

Range CDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1930-1970

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 24

Regulatory Compliance Radio FCC Rule 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic -

Fallback Circuit Switched Mode -

Remote Management NWM 3.2.2 and greater

Maintenance -

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode -

Wireless MOD EM Frequencies -

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

128

Page 130: Powerwave Product Catalog

ALR3200/90109 COMPACT REPEATER BAND SELECTIVE 1900MHz GSM UB, BW15MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +25 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +25 dBm Composite

Frequency Band UL (MHz) 1870-1910

Range TDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1950-1990

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 24

Regulatory Compliance Radio FCC Rule 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic -

Fallback Circuit Switched Mode -

Remote Management NWM 3.2.2 and greater

Maintenance -

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode -

Wireless MOD EM Frequencies -

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

129

Page 131: Powerwave Product Catalog

ALR3200/91109 COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA UB, BW15MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +23 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +26 dBm Composite

Frequency Band UL (MHz) 1870-1910

Range CDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1950-1990

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 24

Regulatory Compliance Radio FCC Rule 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic -

Fallback Circuit Switched Mode -

Remote Management NWM 3.2.2 and greater

Maintenance -

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode -

Wireless MOD EM Frequencies -

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

130

Page 132: Powerwave Product Catalog

ALR3232/51109 COMPACT REPEATER DUAL CELL 1900MHz CDMA LB, 15MHz BW/1900MHz CDMA UB, 15MHz BW, COMBINED DONOR/SERVICE

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +23 dBm Composite (UB and LB combined ports)

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +23 dBm Composite (UB and LB combined ports)

Frequency Band UL (MHz) 1870-1910 (UB)/ 1850-1890 (LB)

Range CDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1950-1990 (UB)/ 1930-1970 (LB)

Power Supply (Optional) NAPower Consumption 120W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”)

Weight kg (lbs) 18 (40)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 24

Regulatory Compliance Radio FCC Rule 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic -

Fallback Circuit Switched Mode -

Remote Management NA

Maintenance -

Type NA

REMOTE CONTROL*

Packet Data Mode -

Wireless MOD EM Frequencies -

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

131

Page 133: Powerwave Product Catalog

ALR3242/03039 COMPACT REPEATER DUAL BAND CDMA 1900 MHz LB/CDMA 800MHz, 15/15MHz BW, SEPARATED DONOR/SERVICE

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +26 dBm Composite +23 dBm Composite

Output Power DL +26 dBm Composite +26 dBm Composite

Noise Figure 8 dB 8 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range CDMA 1900 CDMA 800

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1850-1890 824-849

Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz

No. of Channels Band Selective Band Selective

Frequency Band DL (MHz) 1930-1970 869-894

Power Supply (Optional) NA NA

Power Consumption 60W 60 W

Power Supply 85-265 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N-female (7/16 option)

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio FCC Rule 24 FCC Rule 22

Regulatory Compliance EMC FCC Rule 24 FCC Rule 22

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic NA NA

Fallback Circuit Switched Mode NA NA

Remote Management NA NA

Maintenance NA NA

Packet Data Mode NA NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies NA NA

Type NA NA

132

Page 134: Powerwave Product Catalog

ALR3246/00309 COMPACT REPEATER DUAL BAND GSM 1900 MHz LB/iDEN 800 MHz, 15/15MHz BW, SEPARATED DONOR/COMBINED SERVICE

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +25 dBm Composite +25 dBm Composite

Output Power DL +24 dBm Composite +24 dBm Composite

Noise Figure 9 dB 9 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range GSM 1900 iDEN

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1850-1890 806-824

Bandwidth (MHz) 0.5 to 15 MHZ 0.5 to 15 MHz

No. of Channels Band Selective Band Selective

Frequency Band DL (MHz) 1930-1970 851-869

Power Supply (Optional) NA NA

Power Consumption 60W 60 W

Power Supply 85-265 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N-female (7/16 option)

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio FCC Rule 24 FCC Rule 90

Regulatory Compliance EMC FCC Rule 24 FCC Rule 90

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic NA NA

Fallback Circuit Switched Mode NA NA

Remote Management NA NA

Maintenance NA NA

Packet Data Mode NA NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies NA NA

Type NA NA

133

Page 135: Powerwave Product Catalog

ALR4200/00209 COMPACT REPEATER BAND SELECTIVE 850MHz AMPS, BW25MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +25 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +25 dBm Composite

Frequency Band UL (MHz) 824-849

Range TDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 869-894

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 22

Regulatory Compliance Radio FCC Rule 22

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic NA

Fallback Circuit Switched Mode NA

Remote Management NWM 3.2.2 and greater

Maintenance NA

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode NA

Wireless MOD EM Frequencies NA

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

134

Page 136: Powerwave Product Catalog

ALR4200/01109 COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW15MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +23 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +26 dBm Composite

Frequency Band UL (MHz) 824-849

Range CDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 869-894

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 22

Regulatory Compliance Radio FCC Rule 22

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic NA

Fallback Circuit Switched Mode NA

Remote Management NWM 3.2.2 and greater

Maintenance NA

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode NA

Wireless MOD EM Frequencies NA

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

135

Page 137: Powerwave Product Catalog

ALR4200/01209 COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW25MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +23 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +26 dBm Composite

Frequency Band UL (MHz) 824-849

Range CDMA

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 869-894

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 22

Regulatory Compliance Radio FCC Rule 22

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic NA

Fallback Circuit Switched Mode NA

Remote Management NWM 3.2.2 and greater

Maintenance NA

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode NA

Wireless MOD EM Frequencies NA

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

136

Page 138: Powerwave Product Catalog

ALR4600/00109 COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, WIRELINE REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +25 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +25 dBm Composite

Frequency Band UL (MHz) 806-824

Range iDEN

ELECTRICAL DATA*

Bandwidth 0.5 to 15MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 851-869

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 90

Regulatory Compliance Radio FCC Rule 90

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic NA

Fallback Circuit Switched Mode NA

Remote Management NWM 3.2.2 and greater

Maintenance NA

Type PSTN Unit

REMOTE CONTROL*

Packet Data Mode NA

Wireless MOD EM Frequencies NA

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

137

Page 139: Powerwave Product Catalog

ALR4600/00119 COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, 850/1900 MHz GSM/GPRS REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +25 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +25 dBm Composite

Frequency Band UL (MHz) 806-824

Range iDEN

ELECTRICAL DATA*

Bandwidth 0.5 to 15MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 851-869

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 90

Regulatory Compliance Radio FCC Rule 90

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP 850/1900 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL*

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 850 / 1900 MHz

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

138

Page 140: Powerwave Product Catalog

ALR4600/00209 COMPACT REPEATER BAND SELECTIVE 800 iPS, BW18MHz

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB

Output Power UL (min) +25 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +25 dBm Composite

Frequency Band UL (MHz) 806-824

Range iDEN

ELECTRICAL DATA*

Bandwidth 0.5 to 18MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 851-869

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Rule 90

Regulatory Compliance Radio FCC Rule 90

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic NA

Fallback Circuit Switched Mode NA

Remote Management NA

Maintenance NA

Type NA

REMOTE CONTROL*

Packet Data Mode NA

Wireless MOD EM Frequencies NA

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

139

Page 141: Powerwave Product Catalog

ALR6200/00109 COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA, BW15MHz, GSM/GPRS REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure DL 5 dB, UL 3 dB

Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)

Output Power UL (min) +20 dBm Composite

EVM < 6.7% (LTE)

ACCR -51 dB (LTE)

Group Delay 6 µs

Output Power DL (min) +24 dBm Composite

Frequency Band UL (MHz) 1920-1980

Range WCDMA, HSPA+, LTE

ELECTRICAL DATA*

Bandwidth 0.5 to 15 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 2110-2170

Power Supply (Optional) NAPower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 85-265 VAC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC TS 125.113

Regulatory Compliance Radio TS 125.106

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL*

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

140

Page 142: Powerwave Product Catalog

ALR6212/90129COMPACT REPEATER DUAL BAND WCDMA/EGSM, 2100/900MHz, 15/25MHz BW, GSM/GPRS REM CTRL,COMBINED DONOR AND SERVICE

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +19 dBm Composite +21 dBm Composite

Output Power DL +23 dBm Composite +21 dBm Composite

Noise Figure DL 5 dBUL 3 dB 8 dB

EVM < 6.7% (LTE) -

ACCR -51dB (LTE) -

Group Delay 6 µs 6 µs

Range WCDMA 2100 EGSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 880-915

Bandwidth (MHz) 0.5 to 15 0.5 to 25 MHz

No. of Channels Band Selective Band Selective

Frequency Band DL (MHz) 2110 - 2170 925-960

Power Supply (Optional) NA NA

Power Consumption 60W 60W

Power Supply 85-265 VAC 85-265 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http NA

Fallback Circuit Switched Mode GSM NA

Remote Management NWM 3.2.2 and greater; local web interface NA

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 NA

Packet Data Mode GPRS and IP Ethernet NA

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz NA

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface NA

141

Page 143: Powerwave Product Catalog

ALR6212/90139COMPACT REPEATER DUAL BAND WCDMA/EGSM,2100/900MHz,15/25MHz BW,AC PSU,GSM/GPRS REM CTRL,SEPARATE DONOR/COMBINED SERVICE

POWERWAVE Band Selective Compact Repeaters

Gain adjustment range 55 to 70 dB 55 to 70 dB

Output Power UL +20 dBm Composite +22 dBm Composite

Output Power DL +23 dBm Composite +21 dBm Composite

Noise Figure DL 5 dBUL 3 dB 8 dB

EVM < 6.7% (LTE) -

ACCR -51dB (LTE) -

Group Delay 6 µs 6 µs

Range WCDMA 2100 EGSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980 880-915

Bandwidth (MHz) 0.5 to 15 0.5 to 25 MHz

No. of Channels Broad band Band Selective

Frequency Band DL (MHz) 2110 - 2170 925-960

Power Supply (Optional) NA N/A

Power Consumption 60W 60W

Power Supply 85-265 VAC 85-265 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 385x385x160 (1’3”x1’3”x6”) N/A

Weight kg (lbs) 18 (40) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 125 106 TS 45.005

Regulatory Compliance EMC TS 125 113 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes:

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http N/A

Fallback Circuit Switched Mode GSM N/A

Remote Management NWM 3.2.2 and greater; local web interface N/A

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 N/A

Packet Data Mode GPRS and IP Ethernet N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz NA

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface NA

142

Page 144: Powerwave Product Catalog

ALT1200/00209 COMPACT IN-TRAIN REPEATER BAND SELECTIVE 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL

POWERWAVE Band Selective Compact Repeaters

Noise Figure 8 dB

Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)

Output Power UL (min) +22 dBm Composite

EVM < 6.7% (LTE)

ACCR -51 dB (LTE)

Group Delay 6 µs

Output Power DL (min) +22 dBm Composite

Frequency Band UL (MHz) 890-915

Range GSM, HSPA+, LTE

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Broad band

Frequency Band DL (MHz) 935-960

Power Supply (Optional) N/APower Consumption 60W

TECHNICAL SPECIFICATIONS*Power Supply 21-60 VDC

Dimension (WxHxD) mm (ft) 385x385x110 (1’3”x1’3”x4”)

Weight kg (lbs) 10 (22)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL*

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

Updated: 2010-11-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

143

Page 145: Powerwave Product Catalog

Coverage Products

POWERWAVE Band Selective Standard Repeaters

Repeater Products

Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page

Mini Repeater, 2100MHz WCDMA Broad band 0.5 to 15 ALS6200/00 145

Maritime Standard Band Selective, 900MHz

GSM Band selective 0.5 to 25 AM1200/05309 146

Standard Band Selective, 900MHz GSM, HSPA+ Broad band 0.5 to 25 AR1200/05309 147

Standard Band Selective, 900MHz GSM, HSPA+ Broad band 0.5 to 16.9 AR1200/95209 148

Standard Band Selective, 1800MHz GSM Band selective 0.5 to 16.9 AR2200/00109 149

Standard Dual Band Selective, 1800MHz GSM Band selective 0.5 to 16.9 AR2212/05209 150

Standard Band Selective, 1900MHz CDMA Band selective 0.5 to 16.9 AR3400/01109 151

Standard Band Selective, 1900MHz CDMA Band selective 0.5 to 16.9 AR3400/91109 152

Standard Band Selective, 1900MHz CDMA Band selective 0.5 to 16.9 AR3434/51109 153

Standard Band Selective, 850MHz CDMA Band selective 0.5 to 16.9 AR4200/01209 154

Standard Band Selective, 800MHz SMR/iDEN Broad band 0.5 to 18 AR4600/05309 155

Standard Band Selective, 800MHz SMR/iDEN Broad band 0.5 to 18 AR4640/05309 156

144

Page 146: Powerwave Product Catalog

ALS6200/00 Mini Repeater, 2100 MHz

POWERWAVE Band Selective Standard Repeaters

Output Power UL (min) +18 dBm Composit

Output Power DL (min) +18 dBm Composit

Gain adjustment range 55 to 70 dB

Group Delay 6 µs

Noise Figure DL 6 dBUL 4 dB

Bandwidth 0.5 to 15 MHz

Range WCDMA

ELECTRICAL DATA*

Frequency Band UL (MHz) 1920 -1980

No. of Channels Broad band

Frequency Band DL (MHz) 2110 - 2170

Power Supply (Optional) N/APower Consumption 42W

TECHNICAL SPECIFICATIONS*Power Supply 100-240 VAC

Dimension (WxHxD) mm (ft) 270x365x70 (11”x1’3”x4”)

Weight kg (lbs) 5 (11)

MECHANICAL DATA*RF Connection SMA-female

Housing Specification N/A

Operating Temperature Farenheit (Celsius) 0 to +104 ° (0 to +40 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC TS 125 113

Regulatory Compliance Radio TS 125 106

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

145

Page 147: Powerwave Product Catalog

AM1200/05309 STANDARD BAND SELECTIVE MARITIME REPEATER 900MHz GSM, BW25MHz, GSM/GPRS/GPS REMOTE CONTROL, Door Switch

POWERWAVE Band Selective Standard Repeaters

Noise Figure 6 dB

Gain adjustment range 55 to 85 dB (Gain trail dynamic range: 30dB and gain trail tracking accuracy: 2dB)

Output Power UL (min) +26 dBm Composit

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +26 dBm Composite

Frequency Band UL (MHz) 890-915

Range GSM

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 935-960

Power Supply (Optional) N/APower Consumption 200 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female (7/16 option)

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-06

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

146

Page 148: Powerwave Product Catalog

AR1200/05309 STANDARD BAND SELECTIVE REPEATER 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Band Selective Standard Repeaters

Noise Figure 6 dB

Gain adjustment range 55 to 85 dB / Gain ripple in band +/-2 dB

Output Power UL (min) +26 dBm Composite

EVM < 6% (HSPA+)

ACCR 43 dB (HSPA+)

Group Delay 6 µs

Output Power DL (min) +26 dBm Composite

Frequency Band UL (MHz) 890-915

Range GSM, HSPA+

ELECTRICAL DATA*

Bandwidth 0.5 to 25 MHz

No. of Channels Broad band

Frequency Band DL (MHz) 935-960

Power Supply (Optional) N/APower Consumption 200 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-06

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

147

Page 149: Powerwave Product Catalog

AR1200/95209STANDARD BAND SELECTIVE REPEATER 900MHz EGSM,BW16.9MHz,AC PSU,N CON,GSM/GPRS REMOTE CONTROL,DOOR SW,LOCK-KEYS

POWERWAVE Band Selective Standard Repeaters

Noise Figure 6 dB

Gain adjustment range 55 to 85 dB / Gain ripple in band +/-2 dB

Output Power UL (min) +26 dBm Composite

EVM < 6% (HSPA+)

ACCR 43 dB (HSPA+)

Group Delay 6 µs

Output Power DL (min) +26 dBm Composite

Frequency Band UL (MHz) 880-915

Range GSM, HSPA+

ELECTRICAL DATA*

Bandwidth 0.5 to 16.9 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 925-960

Power Supply (Optional) N/APower Consumption 200 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-06

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

148

Page 150: Powerwave Product Catalog

AR2200/00109 STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM LB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

POWERWAVE Band Selective Standard Repeaters

Noise Figure 6 dB

Gain adjustment range 55 to 85 dB

Output Power UL (min) +29 dBm Composite

EVM -

ACCR -

Group Delay 6 µs

Output Power DL (min) +29 dBm Composite

Frequency Band UL (MHz) 1710 - 1765

Range GSM

ELECTRICAL DATA*

Bandwidth 0.5 to 16.9 MHz

No. of Channels Band Selective

Frequency Band DL (MHz) 1805 - 1860

Power Supply (Optional) N/APower Consumption 200W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x7” )

Weight kg (lbs) 22 [48]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC EN 301 489-1

Regulatory Compliance Radio TS 45.005

APPROVALS AND TESTS*

* All specifications subject to change.

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

Note: Values within [ ] is valid for a max configuration

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-12-06

Northbound Traffic SNMP v1, v2c and http

Fallback Circuit Switched Mode GSM

Remote Management NWM 3.2.2 and greater; local web interface

Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

REMOTE CONTROL

Packet Data Mode GPRS and IP Ethernet

Wireless MOD EM Frequencies 900 / 1800 MHz

149

Page 151: Powerwave Product Catalog

AR2212/05209STANDARD BAND SELECTIVE REPEATER DUAL BAND 1800MHz LB, BW16.9MHz/900MHz GSM, 16.9MHz BW, GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND SERVICE, DOOR SWITCH

POWERWAVE Band Selective Standard Repeaters

Gain adjustment range 55 to 85 dB 55 to 85 dB

Output Power UL +28 dBm Composite +25 dBm Composite

Output Power DL +28 dBm Composite +25 dBm Composite

Noise Figure 6 dB 6 dB

EVM - -

ACCR - -

Group Delay 6 µs 6 µs

Range GSM 1800 GSM 900

Section Bottom Section Door Section

ELECTRICAL DATA*

Frequency Band UL (MHz) 1710 - 1765 890-915

Bandwidth (MHz) 0.5 to 16.9 0.5 to 16.9 MHz

No. of Channels Band Selective Band Selective

Frequency Band DL (MHz) 1805 - 1860 935-960

Power Supply (Optional) N/A N/A

Power Consumption 200 W 200 W

Power Supply 115/230 VAC 115/230 VAC

TECHNICAL SPECIFICATIONS*Section Bottom Section Door Section

Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”) N/A

Weight kg (lbs) 37 (82) N/A

RF Connection N-female N-female

MECHANICAL DATA*Section Bottom Section Door Section

Operating Temperature Farenheit (Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)Housing Specification NEMA 4 / IP65 NEMA 4 / IP65

ENVIRONMENTAL DATA*Section Bottom Section Door Section

Regulatory Compliance Radio TS 45.005 TS 45.005

Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

APPROVALS AND TESTS*Section Bottom Section Door Section

* All specifications subject to change.

Notes: Performance is affected by the way Donor and Service antenna is configured. *If combined to common antenna, output power decrease 1dB and NF increase 1dB

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Northbound Traffic SNMP v1, v2c and http N/A

Fallback Circuit Switched Mode GSM N/A

Remote Management NWM 3.2.2 and greater; local web interface N/A

Maintenance10/100 BaseT Ethernet Port (DHCP managed) and RS232 N/A

Packet Data Mode GPRS and IP Ethernet N/A

Section Bottom Section Door Section

REMOTE CONTROL*

Wireless MOD EM Frequencies 900 / 1800 MHz N/A

TypeIP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface N/A

150

Page 152: Powerwave Product Catalog

AR3400/01109 STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA LB, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

POWERWAVE Band Selective Standard Repeaters

Output Power UL (min) +33 dBm Composite

Output Power DL (min) +33 dBm Composite

Gain adjustment range 55 to 85 dB

Group Delay 6 µs

Noise Figure 6 dB

Bandwidth 0.5 to 16.9 MHz

Range CDMA

ELECTRICAL DATA*

Frequency Band UL (MHz) 1850-1890

No. of Channels Band Selective

Frequency Band DL (MHz) 1930-1970

Power Supply (Optional) NAPower Consumption 200 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195(1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Part 24

Regulatory Compliance Radio FCC Part 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

151

Page 153: Powerwave Product Catalog

AR3400/91109 STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA UB, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

POWERWAVE Band Selective Standard Repeaters

Output Power UL (min) +33 dBm Composite

Output Power DL (min) +33 dBm Composite

Gain adjustment range 55 to 85 dB

Group Delay 6 µs

Noise Figure 6 dB

Bandwidth 0.5 to 16.9 MHz

Range CDMA

ELECTRICAL DATA*

Frequency Band UL (MHz) 1870-1910

No. of Channels Band Selective

Frequency Band DL (MHz) 1950-1990

Power Supply (Optional) NAPower Consumption 200 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Part 24

Regulatory Compliance Radio FCC Part 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

152

Page 154: Powerwave Product Catalog

AR3434/51109STANDARD BAND SELECTIVE REPEATER DUAL CELL 1900MHz CDMA UB,BW16.9MHz/1900MHz CDMA LB,BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

POWERWAVE Band Selective Standard Repeaters

Output Power UL (min) +30 dBm Composite (combined UB and LB ports)

Output Power DL (min) +30 dBm Composite (combined UB and LB ports)

Gain adjustment range 55 to 85 dB

Group Delay 6 µs

Noise Figure 6 dB

Bandwidth 0.5 to 16.9 MHz (UB and LB)

Range CDMA

ELECTRICAL DATA*

Frequency Band UL (MHz) 1870-1910 (UB) / 1850-1890 (LB)

No. of Channels Band Selective

Frequency Band DL (MHz) 1950-1990 (UB) / 1930-1970 (LB)

Power Supply (Optional) NAPower Consumption 400W (2 Separate PSU’s)

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x280 (1’5”x1’9”x11”)

Weight kg (lbs) 48[82]

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Part 24

Regulatory Compliance Radio FCC Part 24

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

153

Page 155: Powerwave Product Catalog

AR4200/01209 STANDARD BAND SELECTIVE REPEATER 850MHz CDMA, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SW

POWERWAVE Band Selective Standard Repeaters

Output Power UL (min) +30 dBm Composite

Output Power DL (min) +33 dBm Composite

Gain adjustment range 55 to 85 dB

Group Delay 6 µs

Noise Figure 6 dB

Bandwidth 0.5 to 16.9 MHz

Range CDMA

ELECTRICAL DATA*

Frequency Band UL (MHz) 824-849

No. of Channels Band Selective

Frequency Band DL (MHz) 869-894

Power Supply (Optional) NAPower Consumption 200 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Part 22

Regulatory Compliance Radio FCC Part 22

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

154

Page 156: Powerwave Product Catalog

AR4600/05309 STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW

POWERWAVE Band Selective Standard Repeaters

Output Power UL (min) +33 dBm Composite

Output Power DL (min) +33 dBm Composite

Gain adjustment range 55 to 85 dB

Group Delay 6 µs

Noise Figure 6 dB

Bandwidth 0.5 to 18 MHz

Range SMR/iDEN

ELECTRICAL DATA*

Frequency Band UL (MHz) 806-824

No. of Channels Broad band

Frequency Band DL (MHz) 851-869

Power Supply (Optional) NAPower Consumption 200 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x195 (1’5”x1’9”x8”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Part 90

Regulatory Compliance Radio FCC Part 90

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

155

Page 157: Powerwave Product Catalog

AR4640/05309 STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, HIGH POWER, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW

POWERWAVE Band Selective Standard Repeaters

Output Power UL (min) +33 dBm Composite

Output Power DL (min) +36 dBm Composite

Gain adjustment range 65 to 95 dB

Group Delay 6 µs

Noise Figure 6 dB

Bandwidth 0.5 to 18 MHz

Range SMR/iDEN

ELECTRICAL DATA*

Frequency Band UL (MHz) 806-824

No. of Channels Broad band

Frequency Band DL (MHz) 851-869

Power Supply (Optional) NAPower Consumption 320 W

TECHNICAL SPECIFICATIONS*Power Supply 115/230 VAC

Dimension (WxHxD) mm (ft) 440x530x280 (1’5”x1’9”x11”)

Weight kg (lbs) 22 (48)

MECHANICAL DATA*RF Connection N-female

Housing Specification NEMA 4 / IP65

Operating Temperature Farenheit (Celsius) -13 to +131 ° (-25 to +55 °)

ENVIRONMENTAL DATA*

Regulatory Compliance EMC FCC Part 90

Regulatory Compliance Radio FCC Part 90

APPROVALS AND TESTS*

* All specifications subject to change. Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

156

Page 158: Powerwave Product Catalog

Coverage Products

POWERWAVE Advanced Train Repeaters

Repeater Products

Title Frequency Range Up-Link (MHz)

Frequency Range Down-Link (MHz) Part Number Page

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

890-915 935-960 ATR1200/001xy (GSM 900) 158

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

890-915 935-960 ATR1200/002xy (GSM 900) 159

Advanced Train Repeater Module 900 MHz (EGSM and UMTS)

880-905 925-950 ATR1200/901xy (EGSM 900) 160

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

880-905 925-950 ATR1200/902xy (EGSM 900) 161

157

Page 159: Powerwave Product Catalog

POWERWAVE Advanced Train Repeaters

Output Power Composite (min) +23 dBm (UL), +18 dBm (DL)

Gain Trail Tracking Accuracy 2 dB

Gain Trail Dynamic Range 30 dB

Noise Figure 70 dB Gain 8 dB

Power Consumption < 50 W

Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC

Maximum Input Power +13 dBm

Frequency Range Downlink (MHz) 935-960

Frequency Range Uplink (MHz) 890-915

ELECTRICAL SPECIFICATIONS

Filter Bandwidth Adjustable (MHz) 0,5-15

Gain Step Resolution 1 dB

Gain Range 50-70 dB

Filter Settling Resolutions (KHz) 25

Weight kg (lbs) < 3 (6.6)

RF Connectors SMA-Type Female

MECHANICAL SPECIFICATIONSDimensions WxDxH mm (in) 450 x 420 x 44 (17.7x 16.5 x 1.7)

ATR1200/001xy (GSM 900) Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 15MHz

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Vibration EN 300 019-1-5 V2, IEC-61373

Ingress Protection IP21

Humidity EC 60068-2-56

ENVIRONMENTAL SPECIFICATIONSTemperature Range -25°C to +45 °C

EMC for Railway Application EN 50155, EN 50121-3-2

Radio ETSI EN 300 609-4

EMC ETS 301 489-1

APPROVALS AND TESTSSafety EN/ IEC 60 950

xy: reserved for power supply type and remote control/GPS option.

D042-071628 Updated: 2009-11-18 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

158

Page 160: Powerwave Product Catalog

POWERWAVE Advanced Train Repeaters

Output Power Composite (min) +23 dBm (UL), +18 dBm (DL)

Gain Trail Tracking Accuracy 2 dB

Gain Trail Dynamic Range 30 dB

Noise Figure 70 dB Gain 8 dB

Power Consumption < 50 W

Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC

Maximum Input Power +13 dBm

Frequency Range Downlink (MHz) 935-960

Frequency Range Uplink (MHz) 890-915

ELECTRICAL SPECIFICATIONS

Filter Bandwidth Adjustable (MHz) 0,5-25

Gain Step Resolution 1 dB

Gain Range 50-70 dB

Filter Settling Resolutions (KHz) 25

Weight kg (lbs) < 3 (6.6)

RF Connectors SMA-Type Female

MECHANICAL SPECIFICATIONSDimensions WxDxH mm (in) 450 x 420 x 44 (17.7x 16.5 x 1.7)

ATR1200/002xy (GSM900) Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 25MHz

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Vibration EN 300 019-1-5 V2, IEC-61373

Ingress Protection IP21

Humidity EC 60068-2-56

ENVIRONMENTAL SPECIFICATIONSTemperature Range -25°C to +45 °C

EMC for Railway Application EN 50155, EN 50121-3-2

Radio ETSI EN 300 609-4

EMC ETS 301 489-1

APPROVALS AND TESTSSafety EN/ IEC 60 950

xy: reserved for power supply type and remote control/GPS option.

D031-08660 Updated: 2010-01-03 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

159

Page 161: Powerwave Product Catalog

POWERWAVE Advanced Train Repeaters

Output Power Composite (min) +24 dBm (UL), +18 dBm (DL)

Gain Trail Tracking Accuracy 2 dB

Gain Trail Dynamic Range 30 dB

Noise Figure 70 dB Gain 8 dB

Power Consumption < 50 W

Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC

Maximum Input Power +13 dBm

Frequency Range Downlink (MHz) 925-950

Frequency Range Uplink (MHz) 880-905

ELECTRICAL SPECIFICATIONS

Filter Bandwidth Adjustable (MHz) 0,5-15

Gain Step Resolution 1 dB

Gain Range 50-70 dB

Filter Settling Resolutions (KHz) 25

Weight kg (lbs) < 3 (6.6)

RF Connectors SMA-Type Female

MECHANICAL SPECIFICATIONSDimensions WxDxH mm (in) 450 x 420 x 44 (17.7x 16.5 x 1.7)

ATR1200/901xy (EGSM900) Advanced Train Repeater Module 900 MHz (EGSM and UMTS)

Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 15MHz

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Vibration EN 300 019-1-5 V2, IEC-61373

Ingress Protection IP21

Humidity EC 60068-2-56

ENVIRONMENTAL SPECIFICATIONSTemperature Range -25°C to +45 °C

EMC for Railway Application EN 50155, EN 50121-3-2

Radio ETSI EN 300 609-4

EMC ETS 301 489-1

APPROVALS AND TESTSSafety EN/ IEC 60 950

xy: reserved for power supply type and remote control/GPS option.

D031-08661 Updated: 2009-11-18 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

160

Page 162: Powerwave Product Catalog

POWERWAVE Advanced Train Repeaters

Output Power Composite (min) +24 dBm (UL), +18dBm (DL)

Gain Trail Tracking Accuracy 2 dB

Gain Trail Dynamic Range 30 dB

Noise Figure 70 dB Gain 8 dB

Power Consumption < 50 W

Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC

Maximum Input Power +13 dBm

Frequency Range Downlink (MHz) 925-950

Frequency Range Uplink (MHz) 880-905

ELECTRICAL SPECIFICATIONS

Filter Bandwidth Adjustable (MHz) 0,5-25

Gain Step Resolution 1 dB

Gain Range 50-70 dB

Filter Settling Resolutions (KHz) 25

Weight kg (lbs) < 3 (6.6)

RF Connectors SMA-Type Female

MECHANICAL SPECIFICATIONSDimensions WxDxH mm (in) 450 x 420 x 44 (17.7x 16.5 x 1.7)

ATR1200/902xy (EGSM900) Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 25MHz

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Vibration EN 300 019-1-5 V2, IEC-61373

Ingress Protection IP21

Humidity EC 60068-2-56

ENVIRONMENTAL SPECIFICATIONSTemperature Range -25°C to +45 °C

EMC for Railway Application EN 50155, EN 50121-3-2

Radio ETSI EN 300 609-4

EMC ETS 301 489-1

APPROVALS AND TESTSSafety EN/ IEC 60 950

xy: reserved for power supply type and remote control/GPS option.

D031-08662 Updated: 2009-11-18 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

161

Page 163: Powerwave Product Catalog

Coverage Products

POWERWAVE Digital Repeaters

Repeater Products

Title Frequency Range (MHz) Bandwidth (MHz) Part Number Page

Nexus RT 850/1900 MHz Dual Band Digital Repeater

824-849 25 NP50B0-22111 163

Nexus RT 850 MHz Digital Repeater 824-849 25 NP5O-11111 164

Nexus RT 1900 MHz Digital Repeater 1850-1910 60 NPBO-11111 165

162

Page 164: Powerwave Product Catalog

POWERWAVE Digital Repeaters

Output Power Uplink +28 dBm composite

Noise Figure 6.6 dB (max. gain)

Output Power Downlink +28 dBm composite

Output Power Uplink +28 dBm composite

Power Supply Options 110-120 VAC

Power Consumption < 400 W

Feedback Cancellation >20 dB

Alarm Fault IP connection or wireless modem

Output Power Downlink +28 dBm composite

Frequency Range, Downlink (MHz) 869-894 1930 -1990

Instantaneous Bandwidth (MHz) 25 (850) 60 (1900)

ELECTRICAL SPECIFICATIONSFrequency Range, Uplink (MHz) 824 - 849 1850 -1910

Total sub-band width (MHz) 25 60

Gain adjustment range (1 dB steps) 55-85 dB

Number of sub-bands 1 to 2 (850MHz), 1 to 5 (1900MHz)

Individual sub-band width, selectable (MHz) 1.5 2.5 10 11 25 2.5 5 7.5 10 15 20

Weight lbs < 50

RF Connectors N-type Female

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 381 x 305 x 229(15 x 12 x 9)

NP50B0-22111 Nexus RT 850/1900 MHz Dual Band Digital Repeater

Casing Class IP 50

Temperature Range -30 °C to +50 °C

ENVIRONMENTAL SPECIFICATIONS

EMC ETS 301 489-1

Radio FCC Parts 22 and 24

Environment ETS 300 019

APPROVALS AND TESTSSafety EN 60950, ETL

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

163

Page 165: Powerwave Product Catalog

POWERWAVE Digital Repeaters

Output Power Uplink +28 dBm composite

Noise Figure 6.6 dB (max. gain)

Output Power Downlink +28 dBm composite

Output Power Uplink +28 dBm composite

Power Supply Options 110-120 VAC

Power Consumption < 200 W

Feedback Cancellation >20 dB

Alarm Fault IP connection or wireless modem

Output Power Downlink +28 dBm composite

Frequency Range, Downlink (MHz) 869-894

Instantaneous Bandwidth (MHz) 25

ELECTRICAL SPECIFICATIONSFrequency Range, Uplink (MHz) 824 - 849

Total sub-band width (MHz) 25

Gain adjustment range (1 dB steps) 55-85 dB

Number of sub-bands 1 to 2

Individual sub-band width, selectable (MHz) 1.5 2.5 10 11 25

Weight lbs 40

RF Connectors N-type Female

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 381 x 305 x 229(15 x 12 x 9)

NP5O-11111 Nexus RT 850 MHz Digital Repeater

Casing Class IP 50

Temperature Range -30 °C to +50 °C

ENVIRONMENTAL SPECIFICATIONS

EMC ETS 301 489-1

Radio FCC Part 22

Environment ETS 300 019

APPROVALS AND TESTSSafety EN 60950, ETL

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

164

Page 166: Powerwave Product Catalog

POWERWAVE Digital Repeaters

Output Power Uplink +28 dBm composite

Noise Figure 6.6 dB (max. gain)

Output Power Downlink +28 dBm composite

Output Power Uplink +28 dBm composite

Power Supply Options 110-120 VAC

Power Consumption < 400 W

Feedback Cancellation >20 dB

Alarm Fault IP connection or wireless modem

Output Power Downlink +28 dBm composite

Frequency Range, Downlink (MHz) 869-894 1930 -1990

Instantaneous Bandwidth (MHz) 25 (850) 60 (1900)

ELECTRICAL SPECIFICATIONSFrequency Range, Uplink (MHz) 824 - 849 1850 -1910

Total sub-band width (MHz) 25 60

Gain adjustment range (1 dB steps) 55-85 dB

Number of sub-bands 1 to 2 (850MHz), 1 to 5 (1900MHz)

Individual sub-band width, selectable (MHz) 1.5 2.5 10 11 25 2.5 5 7.5 10 15 20

Weight lbs < 50

RF Connectors N-type Female

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 381 x 305 x 229(15 x 12 x 9)

NP50B0-22111 Nexus RT 850/1900 MHz Dual Band Digital Repeater

Casing Class IP 50

Temperature Range -30 °C to +50 °C

ENVIRONMENTAL SPECIFICATIONS

EMC ETS 301 489-1

Radio FCC Parts 22 and 24

Environment ETS 300 019

APPROVALS AND TESTSSafety EN 60950, ETL

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

165

Page 167: Powerwave Product Catalog

Turnkey ProjectsWe deliver complete turnkey solutions for wireless coverage. We manage the entire project with full responsibility, starting with analyzing and determining required signal strength, quality and planning for future expansion, right through implementation and operations. All Powerwave turnkey systems are backed by full performance guarantees, with full product and component warranties for your peace of mind.

Powerwave ProductsAs new wireless services, technologies and opportunities emerge, the ability to rapidly adapt will become even more vital to network operators, building owners and public safety agencies. That’s why Powerwave engineers flexibility into every system. It’s why we choose components that are modular and adaptable. And it’s why our coverage solutions are built from the ground up to be versatile.

In-Building and Outdoor DAS Products

Power wave

Public Safety Networks

Commercial

Page 168: Powerwave Product Catalog

Coverage Products

POWERWAVE Bi-Directional Amplifiers

In-Building and Outdoor DAS Products Public Safety Networks

Title Frequency Range (MHz) Gain Range Part Number Page

In-Hancer® Plus Series Bi-Directional Amplifier 380-430 28-70 dB, 28-40 dB

(SB400-F2L & SB400-F4L) SB400-A 168

In-Hancer® Plus Series Bi-Directional Amplifier 450-512 28-70 dB, 28-40 dB

(SB400-F2L & SB400-F4L) SB400-B 169

167

Page 169: Powerwave Product Catalog

POWERWAVE Bi-Directional Amplifiers

Input Impedance 50 O

Propagation Delay <1 µs

Noise Figure <12 dB

Primary Power 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max

Maximum RF Input +10 dBm

VSWR <2:1

ID 3rd Order Intercept Point IP3 +44 dBm

Passband Ripple ±2.5 dB

Frequency Range (MHz) 380-430

MODULE SPECIFICATIONS

Gain Range 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)

AGC Dynamic Range 25 dB

Digital Gain Adjustment In 1 dB Increments

Operating Temperature Range (Celsius) -10C to +50

Enclosure Painted Steel - Wall Mount (Stainless Steel upgrade available)

Weight (lbs) 120 lbs. approx

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 26.28” x 24” x 12.25”

SB400-A In-Hancer® Plus Series Bi-Directional Amplifier

Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages.

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

SB400-F2H2 NA 1.5 MHz 3.0 MHz

SB400-F4H1 403-430 MHz 3.0 MHz 5.0 MHz

SB400-F4L 403-430 MHz 3.0 MHz 5.0 MHz

SB400-F4H3 NA 3.0 MHz 5.0 MHz

SB400-F2H3 NA 1.5 MHz 3.0 MHz

SB400-F4H2 NA 3.0 MHz 5.0 MHz

SB400-F5 380-430 MHz 5.0 MHz 10.0 MHz

SB400-F1 380-430 MHz 1.0 MHz 5.0 MHz

Filtering Options *Range * Passband Bandwidth Tx to Rx Separation

SB400-F3 403-430 MHz 1.5 MHz 5.0 MHz

SB400-F2H1 403-430 MHz 1.5 MHz 3.0 MHz

SB400-F2L 403-430 MHz 1.5 MHz 3.0 MHz

IC Type Acceptance 541A-SB400

FCC Type Acceptance H6M-SB400

ACCEPTANCE TYPE

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.Updated 01/13/2010All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

168

Page 170: Powerwave Product Catalog

POWERWAVE Bi-Directional Amplifiers

Input Impedance 50 O

Propagation Delay <1 µs

Noise Figure <12 dB

Primary Power 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max

Maximum RF Input +10 dBm

VSWR <2:1

ID 3rd Order Intercept Point IP3 +44 dBm

Passband Ripple ±2.5 dB

Frequency Range (MHz) 450-512

MODULE SPECIFICATIONS

Gain Range 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)

AGC Dynamic Range 25 dB

Digital Gain Adjustment In 1 dB Increments

Operating Temperature Range (Celsius) -10C to +50

Enclosure Painted Steel - Wall Mount (Stainless Steel upgrade available)

Weight (lbs) 120 lbs. approx

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 26.28” x 24” x 12.25”

SB400-B In-Hancer® Plus Series Bi-Directional Amplifier

Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages.

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

SB400-F2H2 450-4 70 MHz 1.5 MHz 3.0 MHz

SB400-F4H1 NA 3.0 MHz 5.0 MHz

SB400-F4L 450-512 MHz 3.0 MHz 5.0 MHz

SB400-F4H3 470-512 MHz 3.0 MHz 5.0 MHz

SB400-F2H3 470-512 MHz 1.5 MHz 3.0 MHz

SB400-F4H2 450-4 70 MHz 3.0 MHz 5.0 MHz

SB400-F5 450-512 MHz 5.0 MHz 10.0 MHz

SB400-F1 450-512 MHz 1.0 MHz 5.0 MHz

Filtering Options *Range * Passband Bandwidth Tx to Rx Separation

SB400-F3 450-512 MHz 1.5 MHz 5.0 MHz

SB400-F2H1 NA 1.5 MHz 3.0 MHz

SB400-F2L 450-512 MHz 1.5 MHz 3.0 MHz

IC Type Acceptance 541A-SB400

FCC Type Acceptance H6M-SB400

ACCEPTANCE TYPE

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.Updated 01/13/2010All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

169

Page 171: Powerwave Product Catalog

Coverage Products

POWERWAVE LinkNet™ Convergence Platform

In-Building and Outdoor DAS Products Public Safety Networks

Title Frequency Range (MHz) Bandwidth Part Number Page

LNKA800 Amplifier 806-940 Broadband Amplifier LNKA800 171

LNKF400 406.125-430, 450-512 Narrowband FM 12.5 or 25 KHz LNKF400 172

LNKC1900 Banded Repeater N/A 0.25 MHz, 1.25 MHz,

5 MHz, 15 MHz LNKC1900 173

LNKA900 890-960 Broadband Amplifier LNKA900 174

LNKC1800 Banded Repeater N/A 0.25 MHz, 1.25 MHz, 5 MHz,

15 MHz LNKC1800 175

LNKF100 136-157, 155–174 Narrowband FM 12.5 or 25 KHz LNKF100 176

LNKF800 806-824,851-869, 896-901,935-940

Narrowband FM 12.5 or 25 KHz LNKF800 177

170

Page 172: Powerwave Product Catalog

POWERWAVE LinkNet Convergence Platform

Noise Figure <8 dB, 5 dB Typical

Transmit Duty Cycle Continuous

Transmit Spurious -13 dBm Maximum

ID 3rd Order Intercept Point IP3 +47 dBm Typical

Input Sensitivity Adjust Range NA

Input Hysteresis NA

Adjacent Channel Sensitivity NA

Receive Conducted Spurious -57 dBm Maximum

ConnectionsDB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection.

Front Panel Indicators Operating, Stand By, Fault, Program Mode

Configuration OptionsModules may be configured via optionalGateway Module, or via PC and an RS-232Connection

RF Connectors SMA (50 O) Connectors on back of Chassis

Group Delay <200 nS

Audio Distortion and Noise NA

Power Supply Module Requirements 40Watts Maximum

Bandwidth Broadband Amplifier

RF Gain Adjustment Range +34 dB to +84 dB, in 1 dB increments

AGC Control Adjustment Range +15 dBm to +30 dBm

Uplink Frequency Range (MHz) NA

MODULE SPECIFICATIONSFrequency Range (MHz) 806-940

Downlink Frequency Range (MHz) NA

RF Frequency Stability NA

Output Power 2 NA

Output Power 3 NA

Input Dynamic Range NA

Output Power 1 NA

Maximum RF Output Power NA

RF Output Power Range NA

RF Output Power Variation NA

Operating Temperature Range (Celsius) -10°C to +50°

Operating Humidity Range 10 to 90% RH, Non-Condensing

Weight (lbs) 10

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 2" x 9.11" x 14" (51 x 231.4 x 355.6)

LNKA800 LNKA800 Amplifier

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKA800-F Broadband Amplifier 928-940 MHz

LNKA800-E Broadband Amplifier 896-902 MHz

NA NA NA

NA NA NA

LNKA800-D Broadband Amplifier 869-894 MHz

LNKA800-A Broadband Amplifier 806-824 MHz

* Module Family Type Frequency

LNKA800-C Broadband Amplifier 824-849 MHz

LNKA800-B Broadband Amplifier 851-869 MHz

IC Type Acceptance 1541311246A

FCC Type Acceptance H6M-LNKA800

ACCEPTANCE TYPE

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

171

Page 173: Powerwave Product Catalog

POWERWAVE LinkNet Convergence Platform

Noise Figure NA

Transmit Duty Cycle Continuous

Transmit Spurious -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules

ID 3rd Order Intercept Point IP3 NA

Input Sensitivity Adjust Range -110 dBm to -50 dBm

Input Hysteresis 1 dB to 10 dB

Adjacent Channel Sensitivity 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules

Receive Conducted Spurious -57 dBm Maximum

ConnectionsDB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection.

Front Panel Indicators Operating, Stand By, Fault, Program Mode, Receive, Transmit

Configuration OptionsModules may be configured via optionalGateway Module, or via PC and an RS-232Connection

RF Connectors SMA (50 O) Connectors on back of Chassis

Group Delay <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules

Audio Distortion and Noise <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules

Power Supply Module Requirements 45 Watts Maximum

Bandwidth Narrowband FM 12.5 or 25 KHz

RF Gain Adjustment Range NA

AGC Control Adjustment Range NA

Uplink Frequency Range (MHz) NA

MODULE SPECIFICATIONSFrequency Range (MHz) 406.125 - 430, 450 - 512 MHz

Downlink Frequency Range (MHz) NA

RF Frequency Stability Tracks input signal exactly

Output Power 2 NA

Output Power 3 NA

Input Dynamic Range -110 dBm to -30 dBml

Output Power 1 NA

Maximum RF Output Power +37 dBm

RF Output Power Range +17 dBm to +37 dBm

RF Output Power Variation +/- 1 dB

Operating Temperature Range (Celsius) -10°C to +50°

Operating Humidity Range 10 to 90% RH, Non-Condensing

Weight (lbs) 10

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 2" x 9.11" x 14" (51 x 231.4 x 355.6)

LNKF400 LNKF400

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKF400-D2 12.5 KHz FM channels 470-490 MHz

LNKF400-D1 25 KHz FM channels 470-490 MHz

LNKF400-E2 12.5 KHz FM channels 490-512 MHz

LNKF400-E1 25 KHz FM channels 490-512 MHz

LNKF400-C2 12.5 KHz FM channels 450-470 MHz

LNKF400-A1 25 KHz FM channels 406.125-430 MHz

* Module Family Type Frequency

LNKF400-C1 25 KHz FM channels 450-470 MHz

LNKF400-A2 12.5 KHz FM channels 406.125-430 MHz

IC Type Acceptance 1541195680A

FCC Type Acceptance H6M-OFR400-A, H6M-OFR400

ACCEPTANCE TYPE

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

172

Page 174: Powerwave Product Catalog

POWERWAVE LinkNet Convergence Platform

Noise Figure <6 dB

Transmit Duty Cycle Continuous

Transmit Spurious -13 dBm Maximum

ID 3rd Order Intercept Point IP3 +44 dBm

Input Sensitivity Adjust Range NA

Input Hysteresis NA

Adjacent Channel Sensitivity NA

Receive Conducted Spurious -57 dBm Maximum

ConnectionsDB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection.

Front Panel Indicators Operating, Stand By, Fault, Program Mode

Configuration OptionsModules may be configured via optionalGateway Module, or via PC and an RS-232Connection

RF Connectors SMA (50 O) Connectors on back of Chassis

Group Delay <5 µs for 0.25 MHz or 1.25 MHz Models, <3 µs for 5 MHz or 15 MHz Models

Audio Distortion and Noise NA

Power Supply Module Requirements 40Watts Maximum

Bandwidth 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz

RF Gain Adjustment Range +65 dB to +95 dB, in 1 dB increments

AGC Control Adjustment Range NA

Uplink Frequency Range (MHz) NA

MODULE SPECIFICATIONSFrequency Range (MHz) NA

Downlink Frequency Range (MHz) 1850-1910, 1930-1990

RF Frequency Stability Tracks input signal exactly

Output Power 2 2 Carrier: +23 dBm each

Output Power 3 3 Carrier: +21 dBm each

Input Dynamic Range NA

Output Power 1 1 Carrier: +27 dBm

Maximum RF Output Power NA

RF Output Power Range NA

RF Output Power Variation NA

Operating Temperature Range (Celsius) -10°C to +50°

Operating Humidity Range 10 to 90% RH, Non-Condensing

Weight (lbs) 10

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 2" x 9.11" x 14" (51 x 231.4 x 355.6)

LNKC1900 LNKC1900 Banded Repeater

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKC1900-U Uplink 1.25 MHz Bandwidth 1850-1910 MHz

LNKC1900-U.2 Uplink 0.25 MHz Band 1850-1910 MHz

LNKC1900-U15 Uplink 15 MHz Bandwidth 1850-1910 MHz

LNKC1900-U5 Uplink 5 MHz Bandwidth 1850-1910 MHz

LNKC1900-D15 Downlink 15 MHz Bandwidth 1930-1990 MHz

LNKC1900-D.2 Downlink 0.25 MHz Bandwidth 1930-1990 MHz

* Module Family Type Frequency

LNKC1900-D5 Downlink 5 MHz Bandwidth 1930-1990 MHz

LNKC1900-D Downlink 1.25 MHz Bandwidth 1930-1990 MHz

IC Type Acceptance 1541311242A

FCC Type Acceptance H6M-LNKC1900

ACCEPTANCE TYPE

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

173

Page 175: Powerwave Product Catalog

POWERWAVE LinkNet Convergence Platform

Noise Figure <8 dB, 5 dB Typical

Transmit Duty Cycle Continuous

Transmit Spurious -13 dBm Maximum

ID 3rd Order Intercept Point IP3 +47 dBm Typical

Input Sensitivity Adjust Range NA

Input Hysteresis NA

Adjacent Channel Sensitivity NA

Receive Conducted Spurious -57 dBm Maximum

ConnectionsDB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection.

Front Panel Indicators Operating, Stand By, Fault, Program Mode

Configuration OptionsModules may be configured via optionalGateway Module, or via PC and an RS-232Connection

RF Connectors SMA (50 O) Connectors on back of Chassis

Group Delay <200 nS

Audio Distortion and Noise NA

Power Supply Module Requirements 40Watts Maximum

Bandwidth Broadband Amplifier

RF Gain Adjustment Range +34 dB to +84 dB, in 1 dB increments

AGC Control Adjustment Range +15 dBm to +30 dBm

Uplink Frequency Range (MHz) NA

MODULE SPECIFICATIONSFrequency Range (MHz) 890-960

Downlink Frequency Range (MHz) NA

RF Frequency Stability NA

Output Power 2 NA

Output Power 3 NA

Input Dynamic Range NA

Output Power 1 NA

Maximum RF Output Power NA

RF Output Power Range NA

RF Output Power Variation NA

Operating Temperature Range (Celsius) -10°C to +50°

Operating Humidity Range 10 to 90% RH, Non-Condensing

Weight (lbs) 10

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 2" x 9.11" x 14" (51 x 231.4 x 355.6)

LNKA900 LNKA900

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

NA NA NA

NA NA NA

NA NA NA

NA NA NA

NA NA NA

LNKA900-A Broadband Amplifier 890-915 MHz

* Module Family Type Frequency

NA NA NA

LNKA9800-B Broadband Amplifier 935-960 MHz

IC Type Acceptance NA

FCC Type Acceptance NA

ACCEPTANCE TYPE

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

174

Page 176: Powerwave Product Catalog

POWERWAVE LinkNet Convergence Platform

Noise Figure <6 dB

Transmit Duty Cycle Continuous

Transmit Spurious -13 dBm Maximum

ID 3rd Order Intercept Point IP3 +44 dBm

Input Sensitivity Adjust Range NA

Input Hysteresis NA

Adjacent Channel Sensitivity NA

Receive Conducted Spurious -57 dBm Maximum

ConnectionsDB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection.

Front Panel Indicators Operating, Stand By, Fault, Program Mode

Configuration OptionsModules may be configured via optionalGateway Module, or via PC and an RS-232Connection

RF Connectors SMA (50 O) Connectors on back of Chassis

Group Delay <5 µs for 0.25 MHz or 1.25 MHz Models, <3 µs for 5 MHz or 15 MHz Models

Audio Distortion and Noise NA

Power Supply Module Requirements 40Watts Maximum

Bandwidth 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz

RF Gain Adjustment Range +65 dB to +95 dB, in 1 dB increments

AGC Control Adjustment Range NA

Uplink Frequency Range (MHz) 1710-1785

MODULE SPECIFICATIONSFrequency Range (MHz) NA

Downlink Frequency Range (MHz) 1805-1880

RF Frequency Stability Tracks input signal exactly

Output Power 2 NA

Output Power 3 NA

Input Dynamic Range NA

Output Power 1 NA

Maximum RF Output Power NA

RF Output Power Range NA

RF Output Power Variation NA

Operating Temperature Range (Celsius) -10°C to +50°

Operating Humidity Range 10 to 90% RH, Non-Condensing

Weight (lbs) 10

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 2" x 9.11" x 14" (51 x 231.4 x 355.6)

LNKC1800 LNKC1800 Banded Repeater

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKC1800-U Uplink 1.25 MHz Bandwidth 1710-1785 MHz

LNKC1800-U.2 Uplink 0.25 MHz Bandwidth 1710-1785 MHz

LNKC1800-U15 Uplink 15 MHz Bandwidth 1710-1785 MHz

LNKC1800-U5 Uplink 5 MHz Bandwidth 1710-1785 MHz

LNKC1800-D15 Downlink 15 MHz Bandwidth 1805-1880 MHz

LNKC1800-D.2 Downlink 0.25 MHz Bandwidth 1805-1880 MHz

* Module Family Type Frequency

LNKC1800-D5 Downlink 5 MHz Bandwidth 1805-1880 MHz

LNKC1800-D Downlink 1.25 MHz Bandwidth 1805-1880 MHz

IC Type Acceptance NA

FCC Type Acceptance NA

ACCEPTANCE TYPE

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

175

Page 177: Powerwave Product Catalog

POWERWAVE LinkNet Convergence Platform

Noise Figure NA

Transmit Duty Cycle Continuous

Transmit Spurious -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules

ID 3rd Order Intercept Point IP3 NA

Input Sensitivity Adjust Range -110 dBm to -50 dBm

Input Hysteresis 1 dB to 10 dB

Adjacent Channel Sensitivity 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules

Receive Conducted Spurious -57 dBm Maximum

ConnectionsDB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection.

Front Panel Indicators Operating, Stand By, Fault, Program Mode, Receive, Transmit

Configuration OptionsModules may be configured via optionalGateway Module, or via PC and an RS-232Connection

RF Connectors SMA (50 O) Connectors on back of Chassis

Group Delay <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules

Audio Distortion and Noise <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules

Power Supply Module Requirements 45 Watts Maximum

Bandwidth Narrowband FM 12.5 or 25 KHz

RF Gain Adjustment Range NA

AGC Control Adjustment Range NA

Uplink Frequency Range (MHz) NA

MODULE SPECIFICATIONSFrequency Range (MHz) 136 - 157, 155 - 174

Downlink Frequency Range (MHz) NA

RF Frequency Stability NA

Output Power 2 NA

Output Power 3 NA

Input Dynamic Range -110 dBm to -30 dBml

Output Power 1 NA

Maximum RF Output Power +37 dBm

RF Output Power Range +20 dBm to +37 dBm

RF Output Power Variation +/- 1 dB

Operating Temperature Range (Celsius) -10°C to +50°

Operating Humidity Range 10 to 90% RH, Non-Condensing

Weight (lbs) 10

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 2" x 9.11" x 14" (51 x 231.4 x 355.6)

LNKF100 LNKF100

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

NA NA NA

NA NA NA

NA NA NA

NA NA NA

LNKF100-B2 12.5 KHz FM channels 155-174 MHz

LNKF100-A1 25 KHz FM channels 136-157 MHz

* Module Family Type Frequency

LNKF100-B1 25 KHz FM channels 155-174 MHz

LNKF100-A2 12.5 KHz FM channels 136-157 MHz

IC Type Acceptance NA

FCC Type Acceptance NA

ACCEPTANCE TYPE

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

176

Page 178: Powerwave Product Catalog

POWERWAVE LinkNet Convergence Platform

Noise Figure

Transmit Duty Cycle Continuous

Transmit Spurious -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules

ID 3rd Order Intercept Point IP3

Input Sensitivity Adjust Range -110 dBm to -50 dBm

Input Hysteresis 1 dB to 10 dB

Adjacent Channel Sensitivity 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules

Receive Conducted Spurious -57 dBm Maximum

ConnectionsDB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection.

Front Panel Indicators Operating, Stand By, Fault, Program Mode, Receive, Transmit

Configuration OptionsModules may be configured via optionalGateway Module, or via PC and an RS-232Connection

RF Connectors SMA (50 O) Connectors on back of Chassis

Group Delay <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules

Audio Distortion and Noise <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules

Power Supply Module Requirements 45 Watts Maximum

Bandwidth Narrowband FM 12.5 or 25 KHz

RF Gain Adjustment Range NA

AGC Control Adjustment Range NA

Uplink Frequency Range (MHz) NA

MODULE SPECIFICATIONSFrequency Range (MHz) 806-824,851-869,896-901,935-940

Downlink Frequency Range (MHz) NA

RF Frequency Stability Tracks input signal exactly

Output Power 2

Output Power 3

Input Dynamic Range -110 dBm to -30 dBml

Output Power 1

Maximum RF Output Power +38 dBm (+37 dBm for G2, H2 models)

RF Output Power Range +17 dBm to +38 dBm (+37 dBm)

RF Output Power Variation +/- 1 dB

Operating Temperature Range (Celsius) -10°C to +50°

Operating Humidity Range 10 to 90% RH, Non-Condensing

Weight (lbs) 10

MECHANICAL CHARACTERISTICSDimensions HxWxD in (mm) 2" x 9.11" x 14" (51 x 231.4 x 355.6)

LNKF800 LNKF800

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKF800-H2 12.5 KHz FM channels 935-940 MHz

LNKF800-G2 12.5 KHz FM channels 896-901 MHz

NA NA NA

NA NA NA

LNKF800-D2 12.5 KHz FM channels 851-869 MHz

LNKF800-A1 25 KHz FM channels 806-824 MHz

* Module Family Type Frequency

LNKF800-C2 12.5 KHz FM channels 806-824 MHz

LNKF800-B1 25 KHz FM channels 851-869 MHz

IC Type Acceptance 1541195685A, 1541196848A

FCC Type Acceptance H6M-OFR800, H6M-LNKF800

ACCEPTANCE TYPE

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

177

Page 179: Powerwave Product Catalog

Powerwave Technologies, Inc.Optical and RF Conversion Modules

Optical and RF Conversion Modules

RF Conversion Module/Point of Interconnect

• Settable alarm levels

• 1 to 12 remotes from a single OCM (up to 3 fiber optic nodes in a single OCM)

• Sectorization - POI Independent carrier needs

• Passive wide-band element, "mini" filters/splitters/combiners

• +40dBm max RF input

• 0 to 20 dB TX and RX attenuation

Used in both In-Building and Outdoor DAS, Optical Conversion Modules and RF Conversion/Point of Interconnect Modules leverage the inherent attributes of fiber optic technology, such as low attenuation and noise, and provide extensive reach to deliver superior signal quality while reducing infrastructure and site development costs.

When distributing wireless signals over large coverage areas or remote locations, a traditional coaxial based distribution approach may pose problems. This is due to the increase in RF signal loss over large distances, the length in which coaxial cable can be used and extensive equipment required on site to deliver balanced coverage. Our Optical Conversion Modules and RF Conversion/Point of Interconnect Modules are a solution to these problems.

Optical Conversion Module (OCM)

• 1310nm and/or 1550nm

• Wave Division Multiplexing (WDM)

• Resides in a 19" rack unit for in-building applications

• Simplex in/output

178

Page 180: Powerwave Product Catalog

Coverage Products

POWERWAVE Tap-In® Signal Distribution Taps

In-Building and Outdoor DAS Products Public Safety Networks

Title Part Number Page

Tap-In Signal Distribution Taps Tap-In 180

179

Page 181: Powerwave Product Catalog

POWERWAVE Tap-In Signal Distribution Taps

Tap-In 1/2” Taps for Frequencies 100 MHz – 520 MHz

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Output Connector TNC FemaleOutput Power (Maximum) 1 W

Dimensions, WxHxD (in) 2” x 2” x 1.5”

TAP-IN GENERAL SPECIFICATIONSRF Output Impedance 50 O

Tap In Diameter in (mm) 5/8" Taps 0.83” (21)

Tap In Diameter in (mm) 1/2" Taps 0.58” (14.73)

EXACT TAP-IN DIAMETER MEASUREMENT

Insertion Loss @ 150 MHz 0.7 dB 0.5 dB 0.3 dBLine Input Power 15 W 15 W 15 W

Nominal Coupling Loss 12 dB 16 dB 20 dB

1/2" Taps for Frequencies 100 MHz – 520 MHzModel Number FCT5-12 FCT5-16 FCT5-20

Insertion Loss @ 150 MHz 0.7 dB 0.5 dB 0.3 dBLine Input Power 15 W 15 W 15 W

Nominal Coupling Loss 12 dB 16 dB 20 dB

5/8" Taps for Frequencies 100 MHz – 520 MHzModel Number FCT5-12 FCT7-16 FCT7-20

Insertion Loss @ 450 MHz 0.5 dB 0.5 dB 0.3 dBLine Input Power 15 W 45 W 90 W

Nominal Coupling Loss 12 dB 16 dB 20 dB

1/2" Taps for Frequencies 300 MHz – 1000 MHzModel Number CCT5-12 CCT5-16 CCT5-20

Insertion Loss @ 450 MHz 0.8 dB 0.5 dB 0.3 dBLine Input Power 15 W 45 W 90 W

Nominal Coupling Loss 12 dB 16 dB 20 dB

5/8" Taps for Frequencies 300 MHz – 1000 MHzModel Number CCT7-12 CCT7-16 CCT7-20

Insertion Loss @ 1.9 GHz 0.8 dB 0.5 dBLine Input Power 15 W 45 W

Nominal Coupling Loss 12 dB 16 dB

1/2" Taps for Frequencies 800 MHz – 2000 MHzModel Number PCT5-12 PCT5-16

Insertion Loss @ 1.9 GHz 0.8 dB 0.5 dBLine Input Power 15 W 45 W

Nominal Coupling Loss 12 dB 16 dB

5/8" Taps for Frequencies 800 MHz – 2000 MHzModel Number PCT7-12 PCT7-16

Updated: 2010-11-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

180

Page 182: Powerwave Product Catalog

Coverage Products

POWERWAVE Nexus™ FT Public Safety

In-Building and Outdoor DAS Products Commercial

Title Frequency Band (UL)

Frequency Band (DL)

Gain Adjustment Range DL Part Number Page

Nexus FT Single Band 700MHz for Public Safety (PS) and D block

PS: 788 to 805 MHz (includes upper D block)

PS: 758 to 775 MHz (includes upper D block)

45 - 70 dB RH700030/101 182

181

Page 183: Powerwave Product Catalog

POWERWAVE Nexus FT- Public Safety

Intermodulation 9KHz - 1 GHz -13 dBm

Instantaneous Bandwidth 17 MHz

Band 1 Output Power at Antenna Port 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)

Intermodulation 1 GHz - 12.75 GHz ETSI -13 dBm

Power Consumption 210 W typical, 250 W Max

Power Supply Type 110 - 230 VAC

Alarm LED/SNMP

Frequency Band DL PS: 758 to 775 MHz (includes upper D block)

Frequency Band UL PS: 788 to 805 MHz (includes upper D block)

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1dB

Gain Adjustment Range UL 35 - 60 dB

Gain Adjustment Range DL 45 - 70 dB

RF Connectors 7/16 DIN Female

Optical Connectors FC-APC

Weight kg (lbs) 23 kg (50.7 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465x530x195 (18 x 20.9 x 8.3)

RH700030/101 Nexus FT Single Band 700MHz for Public Safety (PS) and D block

Ingression Protectioin IP-65 (NEMA4)

Temperature Range -25C to +55C

ENVIRONMENTAL SPECIFICATIONS

Environment GR-36-CORE

EMC FCC CFR47 Part 15, 27

Radio FCC CFR47 Parts 15,27,90

APPROVALS AND TESTSSafety UL60950-1

Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 31dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier Composite Power NA NA

2 40dBm 43dBm NA NA

Updated: 2010-11-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

182

Page 184: Powerwave Product Catalog

Coverage Products

POWERWAVE Wide Band Radio Heads

In-Building and Outdoor DAS Products Commercial

Title Dimension_HxWXD_mm_(ft) Weight kg (lbs) Part Number Page Door Upgrade, Wide Band Radio Head (WRH) 440 x 530 x 195 (1’5”x1’9”x8”) <37 (82) RH004000/003 184

Triple Band 900/1800/2100HP 440 x 530 x 280 (1’ 5”x1’9”x11”) <37 (82) RH621010 185

183

Page 185: Powerwave Product Catalog

RH004000/003 Door Upgrade, Wide Band Radio Head (WRH) single band 850MHz, for upgrade of single band 2W 1900MHz WRH base

POWERWAVE Wide Band Radio Heads

Output Power DL, band 2, 8 carrier 8 CDMA, 23dBm

Output Power DL, band 3, 4 carrier N/A

Output Power DL, band 3, 8 carrier N/A

Output Power DL, band 1, 8 carrier N/A

Output Power DL, band 1, 16 carrier N/A

Output Power DL, band 2, 4 carrier 4CDMA, 26dBm

Output Power DL, band 4, 4 carrier N/A

Intermodulation band 2 N/A

Intermodulation band 3 N/A

Intermodulation band 4 N/A

Output Power DL, band 4, 8 carrier N/A

Noise Figure (excluding fiber) 4 dB

Intermodulation band 1 N/A

Output Power DL, band 1, 4 carrier N/A

Frequency UL Band 2 (MHz) 824-849

Frequency DL Band 2 (MHz) 869-894

Frequency UL Band 3 (MHz) N/A

ELECTRICAL DATA*Frequency UL Band 1 (MHz) N/A (base)

Frequency DL Band 1 (MHz) N/A (base)

Frequency DL Band 3 (MHz) N/A

Gain Step Resolution 1 dB

Max Absolute Delay <300 ns

Max Input Power in UL +13 dBm damaging level

Frequency UL Band 4 (MHz) N/A

Frequency DL Band 4 (MHz) N/A

Gain Adjustment Range (1dBsteps), 30 dB

Power Supply 115/230 VAC

Power Consumption <110 W

MISCELLANEOUS SPECIFICATIONS*Alarm Fault, LED and by remote control

Weight kg (lbs) <22.5 (82)

RF Connection N-type female, duplexed service port,

MECHANICAL DATA*Dimension (WxHxD) mm (ft) 440 x 530 x 195 (1’5”x1’9”x8”)

Housing Specification NEMA 4 / IP65Ingression Protection N/A

ENVIRONMENTAL DATA*Operating Temperature Celsius -25 to +55

Regulatory Compliance EMC EN301 489-1

Regulatory Compliance Radio FCC Part 24, 22

Environment ETS 300 019-2.4E

APPROVALS AND TESTS*Safety EN 60950, ETL,

* All specifications subject to change.

Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

Updated: 2010-05-04 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.184

Page 186: Powerwave Product Catalog

RH621010 Triple Band 900/1800/2100HP

POWERWAVE Wide Band Radio Heads

Output Power DL, band 2, 8 carrier 20 dBm/carrier

Output Power DL, band 3, 4 carrier 30 dBm/carrier

Output Power DL, band 3, 8 carrier 27 dBm/carrier

Output Power DL, band 1, 4 carrier 21dBm/carrier

Output Power DL, band 1, 8 carrier 18 dBm/carrier

Output Power DL, band 2, 4 carrier 23 dBm/carrier

Output Power DL, band 4, 4 carrier N/A

Intermodulation band 2 GSM 1800, -30 dBm

Intermodulation band 3 N/A

Intermodulation band 4 N/A

Output Power DL, band 4, 8 carrier N/A

Noise Figure (excluding fiber) GSM900 4 dB, GSM1800 4 dB, UMTS2100 4.5 dB

Intermodulation band 1 GSM 900, -36 dBm

Frequency UL Band 2 (MHz) GSM 1800, 1710-1785

Frequency DL Band 2 (MHz) GSM1800, 1805-1880

Frequency UL Band 3 (MHz) UMTS, 1920-1980

ELECTRICAL DATA*Frequency UL Band 1 (MHz) GSM 900, 890-915

Frequency DL Band 1 (MHz) GSM 900, 935-960

Frequency DL Band 3 (MHz) UMTS 2110-2170

Gain Step Resolution 2 dB

Max Absolute Delay <300 ns

Max Input Power in UL +13 dBm damaging level

Frequency UL Band 4 (MHz) N/A

Frequency DL Band 4 (MHz) N/A

Gain Adjustment Range (1dBsteps), 30 dB

Power Supply 115/230 VAC or 24/48 VDC

Power Consumption <425 W

MISCELLANEOUS SPECIFICATIONS*Alarm Fault, LED and by remote control

Weight kg (lbs) <37 (82)

RF Connection N-type female or 7/16

MECHANICAL DATA*Dimension (WxHxD) mm (ft) 440 x 530 x 280 (1’ 5”x1’9”x11”)

Housing Specification NEMA 4 / IP67Ingression Protection Lock

ENVIRONMENTAL DATA*Operating Temperature Celsius -25 to +55

Regulatory Compliance EMC EN301 489-1, TS125 113

Regulatory Compliance Radio ETS300 609-4, TS125 143

Environment ETS 300 019

APPROVALS AND TESTS*Safety EN 60950, ETL,

* All specifications subject to change.

Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

Updated: 2009-03-16 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.185

Page 187: Powerwave Product Catalog

Coverage Products

POWERWAVE Nexus™ FT Single and Dual Band

In-Building and Outdoor DAS Products Commercial

Title Frequency Band

(UL) Frequency Band (DL)

Gain Adjustment Range DL Part Number Page

Nexus FT Cover Upgrade 850 MHz Single Band

824 - 849 MHz 869 - 894 MHz 25 dB (45 - 70 dB) RH004002/001 189

Nexus FT Single Band EGSM900 880-915 MHz 925-960 MHz 20 dB (45 – 65 dB) RH100020/101 190

Nexus FT Single Band EGSM900 880-915 MHz 925-960 MHz 20 dB (45 – 65 dB) RH100020/211 191

Nexus FT Single Band DCS1800 1710-1785 MHz 1805-1880 MHz 20 dB (45 – 65 dB) RH200020/101 192

Nexus FT Single Band DCS1800 1710-1785 MHz 1805-1880 MHz 20 dB (45 – 65 dB) RH200020/211 193

Nexus FT Dual Band 1800/900

1710-1785, 880-915 MHz

1805-1880, 925-960 MHz 20 dB (45 – 65 dB) RH201022/101 194

Nexus FT Dual Band 1800/900

1710-1785, 880-915 MHz

1805-1880, 925-960 MHz 20 dB (45 – 65 dB) RH201022/211 195

Nexus FT 1900 MHz Single Band 1850 – 1910 MHz 1930 - 1990

MHz 25 dB (45 – 70 dB) RH300020/101 196

Nexus FT 1900 MHz Single Band 1850 – 1910 MHz 1930 - 1990

MHz 25 dB (45 – 70 dB) RH300020/211 197

Nexus FT Dual Band PCS/Cellular

1850-1910, 824-849 MHz

1930-1990, 869-894 MHz 25 dB (45 – 70 dB) RH304022/101 198

Nexus FT Dual Band PCS/Cellular

1850-1910, 824-849 MHz

1930-1990, 869-894 MHz 25 dB (45 – 70 dB) RH304022/211 199

Nexus FT Dual Band PCS/AWS

1850-1910, 1710-1755 MHz

1930-1990, 2110-2155 MHz 25 dB (45 – 70 dB) RH309022/101 200

Nexus FT Dual Band PCS/AWS

1850-1910, 1710-1755 MHz

1930-1990, 2110-2155 MHz 25 dB (45 – 70 dB) RH309022/211 201

186

Page 188: Powerwave Product Catalog

Coverage Products

POWERWAVE Nexus™ FT Single and Dual Band

In-Building and Outdoor DAS Products Commercial

Title Frequency Band (UL)

Frequency Band (DL)

Gain Adjustment Range DL Part Number Page

Nexus FT 1900 MHz Including G-block Single Band

1850 – 1915 MHz 1930 - 1995 MHz 25 dB (45 – 70 dB) RH330020/101 202

Nexus FT Dual Band PCS/Cellular Including G-block

1850-1915, 824-849 MHz

1930-1995, 869-894 MHz 25 dB (45 – 70 dB) RH334022/101 203

Nexus FT 850 MHz Single Band 824 – 849 MHz 869 – 894 MHz 25 dB (45 – 70 dB) RH400020/101 204

Nexus FT 850 MHz Single Band 824 – 849 MHz 869 – 894 MHz 25 dB (45 – 70 dB) RH400020/211 205

Nexus FT Single Band 800iDEN 806 – 824 MHz 851 – 869 MHz 25 dB (45 – 70 dB) RH500020/101 206

Nexus FT Single Band 800iDEN & Public Safety

806 – 824 MHz 851 – 869 MHz 25 dB (45 – 70 dB) RH500020/211 207

Nexus FT Single Band 2100MHz UMTS

1920-1980 MHz 2110-2170 MHz 20 dB (45 – 65 dB) RH600020/101 208

Nexus FT Single Band 2100MHz UMTS

1920-1980 MHz 2110-2170 MHz 20 dB (45 – 65 dB) RH600020/211 209

Nexus FT Dual Band EGSM900 & WCDMA2100

1920-1980, 880-915 MHz

2110-2170, 925-960 MHz 20 dB (45 – 65 dB) RH601022/101 210

Nexus FT Dual Band EGSM900 & WCDMA2100

1920-1980, 880-915 MHz

2110-2170, 925-960 MHz 20 dB (45 – 65 dB) RH601022/211 211

Nexus FT Dual Band DCS1800 & WCDMA2100

1920-1980, 1710-1785 MHz

2110-2170, 1805-1880 MHz 20 dB (45 – 65 dB) RH602022/101 212

Nexus FT Dual Band DCS1800 & WCDMA2100

1920-1980, 1710-1785 MHz

2110-2170, 1805-1880 MHz 20 dB (45 – 65 dB) RH602022/211 213

Nexus FT Single Band 700MHz for Public Safety (PS) and D block

PS: 788 to 805 MHz (includes upper D block)

PS: 758 to 775 MHz (includes upper D block)

45 - 70 dB RH700030/101 214

187

Page 189: Powerwave Product Catalog

Coverage Products

POWERWAVE Nexus™ FT Single and Dual Band

In-Building and Outdoor DAS Products Commercial

Title Frequency Band

(UL) Frequency Band (DL)

Gain Adjustment Range DL Part Number Page

Nexus FT Dual Band 700MHz for Public Safety (PS) and D block /800iDEN

788 to 805 MHz (includes upper D block), 806 - 824

MHz

758 to 775 MHz (includes upper D block), 851 - 869

MHz

25 dB (45 – 70 dB) RH705032/101 215

Nexus FT Single Band 700MHz LTE (A,B,C AND UPPER C BLOCKS)

lower A, B and C blocks (698MHz-

716MHz), upper C block (776MHz-

787MHz)

A, B and C blocks (728MHz-

746MHz), upper C block (746MHz-

757MHz)

45 - 70 dB RH770020/101 216

Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

806-824, 896-902 MHz

851-869, 935-941 MHz 25 dB (45 – 70 dB) RH805022/101 217

Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

806-824, 896-902 MHz

851-869, 935-941 MHz 25 dB (45 – 70 dB) RH805022/211 218

Nexus FT Single Band AWS 1710-1755 MHz 2110-2155 MHz 25 dB (45 – 70 dB) RH900020/101 219

Nexus FT Single Band AWS 1710-1755 MHz 2110-2155 MHz 25 dB (45 – 70 dB) RH900020/211 220

188

Page 190: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm (FCC)

Instantaneous Bandwidth Full Band

Band 1 Output Power at Antenna Port Maximum Composite Power 43 dBm

Intermodulation 1 GHz - 12.75 GHz ETSI <-13 dBm (FCC)

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 869 - 894 MHz

Frequency Band UL 824 - 849 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 - 60 dB)

Gain Adjustment Range DL 25 dB (45 - 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 22 kg (48 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 156 (18 x 20.9 x 6.1)

RH004002/001 Nexus FT Cover Upgrade 850 MHz Single Band

Ingression Protectioin IP65 / NEM A 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC EN 301 489

Radio FCC CFR 47 part 22

APPROVALS AND TESTSSafety UL, EN 60950, ETL

Cover Upgrade Configuration - AC powered, with one duplexed 7/16 DIN connector RF service port and coax RF donor port.

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34 43 29 38

16 31 43 28 40

4 37 43 29 35

Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI

2 40 43 29 32

Updated: 2009-03-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

189

Page 191: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth 35 MHz, EVM<7% , PCDE< -47dB, ACCR> 49dB[HSDPA+], EVM<7% , ACCR>48dB[LTE]

Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by Remote Control

Frequency Band DL 925-960 MHz

Frequency Band UL 880-915 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg. (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH100020/101 Nexus FT Single Band 900MHz

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC EN 301 489

Radio ETS 300 609-4, TS 25.143 , TS 36.143

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH100020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 29dBm 38dBm NA NA

16 28dBm 40dBm NA NA

4 29dBm 35dBm NA NA

*Carrier Count EGSM900 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 29dBm 32dBm NA NA

Updated: 2010-08-25 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

190

Page 192: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth 35 MHz

Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE)

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by Remote Control

Frequency Band DL 925-960 MHz

Frequency Band UL 880-915 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg. (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH100020/211 Nexus FT Single Band 900MHz

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC EN 301 489

Radio ETS 300 609-4

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH100020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 29dBm 38dBm NA NA

16 28dBm 40dBm NA NA

4 29dBm 35dBm NA NA

*Carrier Count EGSM900 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 29dBm 32dBm NA NA

Updated: 2010-11-18 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

191

Page 193: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth 75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE]

Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by Remote Control

Frequency Band DL 1805-1880 MHz

Frequency Band UL 1710-1785 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg. (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH200020/101 Nexus FT Single Band 1800MHz

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC EN 301 489

Radio ETS 300 609-4, TS 25.143 , TS 36.143

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH200020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 31dBm 40dBm NA NA

16 28dBm 40dBm NA NA

4 34dBm 40dBm NA NA

*Carrier Count DCS1800 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 35dBm 38dBm NA NA

Updated: 2010-11-18 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

192

Page 194: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth 75 MHz

Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE)

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by Remote Control

Frequency Band DL 1805-1880 MHz

Frequency Band UL 1710-1785 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg. (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH200020/211 Nexus FT Single Band DCS1800

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC EN 301 489

Radio ETS 300 609-4

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH200020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 31dBm 40dBm NA NA

16 28dBm 40dBm NA NA

4 34dBm 40dBm NA NA

*Carrier Count DCS1800 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 35dBm 38dBm NA NA

Updated: 2010-11-18 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

193

Page 195: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth Full Band

Output Power DL 2 Maximum composite power EGSM900 +40 dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL Maximum composite power DCS1800 +40 dBm*

Frequency Band DL 1805-1880, 925-960 MHz

Frequency Band UL 1710-1785, 880-915 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH201022/101 Nexus FT Dual Band 1800/900

Ingression Protection IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio ETSI EN 300 609-4

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH201022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 29dBm 38dBm 31dBm 40dBm

16 28dBm 40dBm 28dBm 40dBm

NA NA NA

*Carrier Count EGSM900? Power Per Carrier EGSM900 Composite Power DCS1800 Power Per Carrier DCS1800 Composite Power

2 29dBm 32dBm 35dBm 38dBm

4 29dBm 35dBm 34dBm 40dBm

Updated: 2010-11-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.194

Page 196: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth Full Band

Output Power DL 2 Maximum composite power EGSM900 +40 dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL Maximum composite power DCS1800 +40 dBm*

Frequency Band DL 1805-1880, 925-960 MHz

Frequency Band UL 1710-1785, 880-915 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH201022/211 Nexus FT Dual Band 1800/900

Ingression Protection IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio ETSI EN 300 609-4

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH201022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 29dBm 38dBm 31dBm 40dBm

16 28dBm 40dBm 28dBm 40dBm

NA NA NA

*Carrier Count EGSM900 Power Per Carrier EGSM900 Composite Power DCS1800 Power Per Carrier DCS1800 Composite Power

2 29dBm 32dBm 35dBm 38dBm

4 29dBm 35dBm 34dBm 40dBm

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.195

Page 197: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm

Instantaneous Bandwidth Full Band

Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm

Intermodulation 1 GHz - 12.75 GHz ETSI <-13 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 1930 - 1990 MHz

Frequency Band UL 1850 – 1910 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH300020/101 Nexus FT 1900 MHz Single Band

Ingression Protectioin IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment

EMC

Radio FCC CFR 47 Part 15 and 24

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH300020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

16 31dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

196

Page 198: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm

Instantaneous Bandwidth Full Band

Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm

Intermodulation 1 GHz - 12.75 GHz ETSI <-13 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 1930 - 1990 MHz

Frequency Band UL 1850 – 1910 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH300020/211 Nexus FT 1900 MHz Single Band

Ingression Protectioin IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment

EMC

Radio FCC CFR 47 Part 15 and 24

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH300020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

16 31dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

197

Page 199: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13dBm

Instantaneous Bandwidth 65MHz (PCS), 25MHz (Cellular)

Output Power DL 2 +43 dBm (800 MHz, Downlink , Composite)

Intermodulation 1 GHz - 12.75 GHz ETSI <-13dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL +43 dBm (1900 MHz, Downlink , Composite)

Frequency Band DL 1930-1990, 869-894 MHz

Frequency Band UL 1850-1910, 824-849 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 280 (18.3 x 20.9 x 12)

RH304022/101 Nexus FT Dual Band PCS/Cellular

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 24, FCC part 22

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH304022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA

NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.198

Page 200: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth NA

Output Power DL 2 +43 dBm (800 MHz, Downlink , Composite)

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL +43 dBm (1900 MHz, Downlink , Composite)

Frequency Band DL 1930-1990, 869-894 MHz

Frequency Band UL 1850-1910, 824-849 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 280 (18.3 x 20.9 x 12)

RH304022/211 Nexus FT Dual Band PCS/Cellular

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 24, FCC part 22

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH304022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

NA NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.199

Page 201: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth NA

Output Power DL 2 +43 dBm (2100 MHz, Downlink , Composite)*

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL +43 dBm (1900 MHz, Downlink , Composite)

Frequency Band DL 1930-1990, 2110-2155 MHz

Frequency Band UL 1850-1910, 1710-1755 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH309022/101 Nexus FT Dual Band PCS/AWS

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 24, FCC part 27

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH309022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

NA NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.200

Page 202: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth NA

Output Power DL 2 +43 dBm (2100 MHz, Downlink , Composite)*

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL +43 dBm (1900 MHz, Downlink , Composite)

Frequency Band DL 1930-1990, 2110-2155 MHz

Frequency Band UL 1850-1910, 1710-1755 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH309022/211 Nexus FT Dual Band PCS/AWS

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 24, FCC part 27

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH309022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

NA NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.201

Page 203: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm

Instantaneous Bandwidth 65MHz

Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm

Intermodulation 1 GHz - 12.75 GHz ETSI <-13 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 1930 - 1995 MHz

Frequency Band UL 1850 – 1915 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH330020/101 Nexus FT 1900 MHz Including G-block Single Band

Ingression Protectioin IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment

EMC

Radio FCC CFR 47 Part 15 and 24

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH330020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

16 31dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

Updated: 2010-01-06 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

202

Page 204: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13dBm

Instantaneous Bandwidth 65MHz (PCS), 25MHz (Cellular)

Output Power DL 2 +43 dBm (800 MHz, Downlink , Composite)

Intermodulation 1 GHz - 12.75 GHz ETSI <-13dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL +43 dBm (1900 MHz, Downlink , Composite)

Frequency Band DL 1930-1995, 869-894 MHz

Frequency Band UL 1850-1915, 824-849 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 280 (18.3 x 20.9 x 12)

RH334022/101 Nexus FT Dual Band PCS/Cellular Including G-block

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 24, FCC part 22

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH334022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA

NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.203

Page 205: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm

Instantaneous Bandwidth Full Band

Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm

Intermodulation 1 GHz - 12.75 GHz ETSI <-13 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 869 – 894 MHz

Frequency Band UL 824 – 849 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH400020/101 Nexus FT 850 MHz Single Band

Ingression Protectioin IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment

EMC

Radio FCC CFR 47 Part 22

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH400020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm 29dBm 38dBm

16 31dBm 43dBm 28dBm 40dBm

4 37dBm 43dBm 29dBm 35dBm

*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm 29dBm 32dBm

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

204

Page 206: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm

Instantaneous Bandwidth Full Band

Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm

Intermodulation 1 GHz - 12.75 GHz ETSI <-13 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 869 – 894 MHz

Frequency Band UL 824 – 849 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH400020/211 Nexus FT 850 MHz Single Band

Ingression Protectioin IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment

EMC

Radio FCC CFR 47 Part 22

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH400020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm 29dBm 38dBm

16 31dBm 43dBm 28dBm 40dBm

4 37dBm 43dBm 29dBm 35dBm

*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm 29dBm 32dBm

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

205

Page 207: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth NA

Band 1 Output Power at Antenna Port +43 dBm (iDEN800, Downlink , Quad BR)

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 851 – 869 MHz

Frequency Band UL 806 – 824 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (45 – 70 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH500020/101 Nexus FT Single Band 800iDEN

Ingression Protectioin IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC CFR 47 Part 15, Part 90

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH500020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

Updated: 2009-11-17 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

206

Page 208: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth NA

Band 1 Output Power at Antenna Port +43 dBm (iDEN800, Downlink , Quad BR)

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 851 – 869 MHz

Frequency Band UL 806 – 824 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (45 – 70 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH500020/211 Nexus FT Single Band 800iDEN&Public Safety

Ingression Protectioin IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC CFR 47 Part 15, Part 90

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH500020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

207

Page 209: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth 60 MHz

Band 1 Output Power at Antenna Port Maximum composite power +43dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 2110-2170 MHz

Frequency Band UL 1920-1980 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH600020/101 Nexus FT Single Band 2100MHz UMTS

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC ETS 300 489-1

Radio ESTI EN 301 908-11

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH600020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

4 37dBm 43dBm NA

*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

Updated: 2009-01-15 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

208

Page 210: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth 60 MHz

Band 1 Output Power at Antenna Port Maximum composite power +43dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 2110-2170 MHz

Frequency Band UL 1920-1980 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH600020/211 Nexus FT Single Band 2100MHz UMTS

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC ETS 300 489-1

Radio ESTI EN 301 908-11

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH600020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

4 37dBm 43dBm NA

*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

Updated: 2009-01-15 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

209

Page 211: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth Full Band

Output Power DL 2 Maximum composite power EGSM900 +40 dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL Maximum composite power WCDMA2100 +43dBm*

Frequency Band DL 2110-2170, 925-960 MHz

Frequency Band UL 1920-1980, 880-915 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH601022/101 Nexus FT Dual Band EGSM900 & WCDMA2100

Ingression Protection IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio ETSI EN 300 609-4 and EN 301 908-11

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH601022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 29dBm 38dBm 34dBm 43dBm

16 28dBm 40dBm NA

NA NA

*Carrier Count EGSM900 Power Per Carrier EGSM900 Composite Power WCDMAS 2100 Power Per Carrier

WCDMAS 2100 Composite Power

2 29dBm 32dBm 40dBm 43dBm

4 29dBm 35dBm 37dBm 43dBm

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

210

Page 212: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth Full Band

Output Power DL 2 Maximum composite power EGSM900 +40 dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL Maximum composite power WCDMA2100 +43dBm*

Frequency Band DL 2110-2170, 925-960 MHz

Frequency Band UL 1920-1980, 880-915 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH601022/211 Nexus FT Dual Band EGSM900 & WCDMA2100

Ingression Protection IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio ETSI EN 300 609-4 and EN 301 908-11

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH601022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 29dBm 38dBm 34dBm 43dBm

16 28dBm 40dBm NA

NA NA

*Carrier Count EGSM900 Power Per Carrier EGSM900 Composite Power WCDMAS 2100 Power Per Carrier

WCDMAS 2100 Composite Power

2 29dBm 32dBm 40dBm 43dBm

4 29dBm 35dBm 37dBm 43dBm

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

211

Page 213: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth Full Band

Output Power DL 2 Maximum composite power DCS1800 +40 dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL Maximum composite power WCDMA2100 +43dBm*

Frequency Band DL 2110-2170, 1805-1880 MHz

Frequency Band UL 1920-1980, 1710-1785 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH602022/101 Nexus FT Dual Band DCS1800 & WCDMA2100

Ingression Protection IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC ETS 300 489-1

Radio ETSI EN 300 609-4 and EN 301 908-11

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH602022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 31dBm 40dBm 34dBm 43dBm

12 29dBm 40dBm 32dBm 43dBm

*Carrier Count DCS1800 Power Per Carrier DCS1800 Composite Power WCDMA 2100 Power Per Carrier

WCDMA 2100 Composite Power

2 35dBm 38dBm 40dBm 43dBm

4 34dBm 40dBm 37dBm 43dBm

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

212

Page 214: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-36 dBm

Instantaneous Bandwidth Full Band

Output Power DL 2 Maximum composite power DCS1800 +40 dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI <-30 dBm

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL Maximum composite power WCDMA2100 +43dBm*

Frequency Band DL 2110-2170, 1805-1880 MHz

Frequency Band UL 1920-1980, 1710-1785 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 20 dB (35 – 55 dB)

Gain Adjustment Range DL 20 dB (45 – 65 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH602022/211 Nexus FT Dual Band DCS1800 & WCDMA2100

Ingression Protection IP65 / NEMA 4

Temperature Range -25 °C to +55 °C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC ETS 300 489-1

Radio ETSI EN 300 609-4 and EN 301 908-11

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH602022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 31dBm 40dBm 34dBm 43dBm

12 29dBm 40dBm 32dBm 43dBm

*Carrier Count DCS1800 Power Per Carrier DCS1800 Composite Power WCDMA 2100 Power Per Carrier

WCDMA 2100 Composite Power

2 35dBm 38dBm 40dBm 43dBm

4 34dBm 40dBm 37dBm 43dBm

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

213

Page 215: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz -13 dBm

Instantaneous Bandwidth 17 MHz

Band 1 Output Power at Antenna Port 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)

Intermodulation 1 GHz - 12.75 GHz ETSI -13 dBm

Power Consumption 210 W typical, 250 W Max

Power Supply Type 110 - 230 VAC

Alarm LED/SNMP

Frequency Band DL PS: 758 to 775 MHz (includes upper D block)

Frequency Band UL PS: 788 to 805 MHz (includes upper D block)

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1dB

Gain Adjustment Range UL 35 - 60 dB

Gain Adjustment Range DL 45 - 70 dB

RF Connectors 7/16 DIN Female

Optical Connectors FC-APC

Weight kg (lbs) 23 kg (50.7 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465x530x195 (18 x 20.9 x 8.3)

RH700030/101 Nexus FT Single Band 700MHz for Public Safety (PS) and D block

Ingression Protectioin IP-65 (NEMA4)

Temperature Range -25C to +55C

ENVIRONMENTAL SPECIFICATIONS

Environment GR-36-CORE

EMC FCC CFR47 Part 15, 27

Radio FCC CFR47 Parts 15,27,90

APPROVALS AND TESTSSafety UL60950-1

Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 31dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier Composite Power NA NA

2 40dBm 43dBm NA NA

Updated: 2010-11-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

214

Page 216: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth 17MHZ (700 PS)

Output Power DL 2 +43 dBm (iDEN800, Downlink , Quad BR)

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)

Frequency Band DL 758 to 775 MHz (includes upper D block), 851 - 869 MHz

Frequency Band UL 788 to 805 MHz (includes upper D block), 806 - 824 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH705032/101 Nexus FT Dual Band 700MHz for Public Safety (PS) and D block /800iDEN

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 15, FCC part 90

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH705032/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

NA NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-10-28 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

215

Page 217: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz -13 dBm

Instantaneous Bandwidth Upper Band 11 MHz, lower Band 18 MHz

Band 1 Output Power at Antenna Port 43 dBm

Intermodulation 1 GHz - 12.75 GHz ETSI -13 dBm

Power Consumption 210 W typical, 250 W Max

Power Supply Type 110 - 230 VAC

Alarm LED/SNMP

Frequency Band DL A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz)

Frequency Band UL lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz)

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1dB

Gain Adjustment Range UL 35 - 60 dB

Gain Adjustment Range DL 45 - 70 dB

RF Connectors 7/16 DIN Female

Optical Connectors FC-APC

Weight kg (lbs) 23 kg (50.7 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465x530x195 (18 x 20.9 x 8.3)

RH770020/101 Nexus FT Single Band 700MHz LTE (A,B,C AND UPPER C BLOCKS)

Ingression Protectioin IP-65 (NEMA4)

Temperature Range -25C to +55C

ENVIRONMENTAL SPECIFICATIONS

Environment GR-36-CORE

EMC FCC CFR47 Part 15, 27

Radio FCC CFR47 Parts 15,27,90

APPROVALS AND TESTSSafety UL60950-1

Nexus FT 700 MHz LTE 20W, AC Pwr,WDM Fiber donor port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 31dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier Composite Power NA NA

2 40dBm 43dBm NA NA

Updated: 2010-03-29 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

216

Page 218: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth NA

Output Power DL 2 +43 dBm (iDEN800, Downlink , Quad BR)

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL +43 dBm (iDEN800, Downlink , Quad BR)

Frequency Band DL 851-869, 935-941 MHz

Frequency Band UL 806-824, 896-902 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH805022/101 Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 15, FCC part 90

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH805022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

NA NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.217

Page 219: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz NA

Instantaneous Bandwidth NA

Output Power DL 2 +43 dBm (iDEN800, Downlink , Quad BR)

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 420 W Typical

Power Supply Options 115/230 VAC

Alarm LED and by remote control

Output Power DL +43 dBm (iDEN800, Downlink , Quad BR)

Frequency Band DL 851-869, 935-941 MHz

Frequency Band UL 806-824, 896-902 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 44 kg (96 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)

RH805022/211 Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

Ingression Protection IP65 / NEMA 4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019 -2.4E

EMC ETS 300 489-1

Radio FCC Part 15, FCC part 90

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH805022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

NA NA NA

Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power

2 40dBm 43dBm NA NA

4 37dBm 43dBm NA NA

Updated: 2010-11-01 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.218

Page 220: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm

Instantaneous Bandwidth 45 MHz

Band 1 Output Power at Antenna Port Maximum composite power +43dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 2110-2155 MHz

Frequency Band UL 1710-1755 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH900020/101 Nexus FT Single Band AWS

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC ETS 300 489-1

Radio FCC Part 27

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH900020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

Updated: 2010-06-21 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

219

Page 221: Powerwave Product Catalog

POWERWAVE Nexus FT Single and Dual Band

Intermodulation 9KHz - 1 GHz <-13 dBm

Instantaneous Bandwidth 45 MHz

Band 1 Output Power at Antenna Port Maximum composite power +43dBm*

Intermodulation 1 GHz - 12.75 GHz ETSI NA

Power Consumption 210 W Typical

Power Supply Type 115/230 VAC

Alarm LED and by remote control

Frequency Band DL 2110-2155 MHz

Frequency Band UL 1710-1755 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget 10 dBo

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 dB (35 – 60 dB)

Gain Adjustment Range DL 25 dB (45 – 70 dB)

RF Connectors 7/16 DIN female

Optical Connectors FC/APC

Weight kg (lbs) < 25 kg (55 lbs)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 465 x 530 x 211 (18 x 20.9 x 8.3)

RH900020/211 Nexus FT Single Band AWS

Ingression Protectioin IP65/NEMA4

Temperature Range - 25°C to + 55°C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC ETS 300 489-1

Radio FCC Part 27

APPROVALS AND TESTSSafety UL, EN 60950, ETL

RH900020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34dBm 43dBm NA NA

12 32dBm 43dBm NA NA

4 37dBm 43dBm NA NA

*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI

2 40dBm 43dBm NA NA

#Error © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

220

Page 222: Powerwave Product Catalog

Coverage Products

POWERWAVE Nexus™ FT Rack Mounts

In-Building and Outdoor DAS Products Commercial

Title Frequency Band (UL)

Frequency Band (DL)

Gain Adjustment Range DL Part Number Page

Nexus Dual Band Repeaters

1850-1910, 824-849 MHz

1930-1990, 869-894 MHz 25 (45 - 70) dB RH304022/03A 222

Nexus Dual Band Repeaters

1850-1910, 806-824 MHz

1930-1990, 851-869 MHz 25 (45 - 70) dB RH305022/03A 223

Nexus Dual Band Repeaters

1850-1910, 896-902 MHz

1930-1990, 935-941 MHz 25 (45 - 70) dB RH308022/03A 224

221

Page 223: Powerwave Product Catalog

POWERWAVE Nexus FT Rack Mounts

Intermodulation 9KHz - 1 GHz -13 dBm

Instantaneous Bandwidth 60 / 25 MHz

Output Power DL 2 20 W

Intermodulation 1 GHz - 12.75 GHz ETSI -13 dBm

Power Consumption 420 W typical, 500 W Max

Power Supply Options 110 - 230 VAC

Alarm LED/SNMP

Output Power DL 20 W

Frequency Band DL 1930-1990, 869-894 MHz

Frequency Band UL 1850-1910, 824-849 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget n/a

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 (35 - 60) dB

Gain Adjustment Range DL 25 (45 - 70) dB

RF Connectors SMA (Donor), N (Service)

Optical Connectors n/a -units require ORD for optical to RF conversion

Weight kg (lbs) 30 (66)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 266 x 483 x 551 (10.5 x 19 x 21.7)

RH304022/03A Nexus Dual Band Repeaters

Ingression Protection IP50

Temperature Range 0C to +55C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC FCC CFR47 Part 22, 24

Radio FCC CFR47 Parts 22, 24

APPROVALS AND TESTSSafety UL60950-1

Nexus FT Rack Mount Dual Band 1900 / 850, Simplex SMA donor ports and duplexed N service ports per band.

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34 dBm 43 dBm

12 32 dBm 43 dBm

Carrier Count Power Per Carrier Composite Power

2 40 dBm 43 dBm

4 37 dBm 43 dBm

Updated: 2010-11-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.222

Page 224: Powerwave Product Catalog

POWERWAVE Nexus FT Rack Mounts

Intermodulation 9KHz - 1 GHz -13 dBm

Instantaneous Bandwidth 60 / 18 MHz

Output Power DL 2 20 W

Intermodulation 1 GHz - 12.75 GHz ETSI -13 dBm

Power Consumption 420 W typical, 500 W Max

Power Supply Options 110 - 230 VAC

Alarm LED/SNMP

Output Power DL 20 W

Frequency Band DL 1930-1990, 851-869 MHz

Frequency Band UL 1850-1910, 806-824 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget n/a

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 (35 - 60) dB

Gain Adjustment Range DL 25 (45 - 70) dB

RF Connectors SMA (Donor), N (Service)

Optical Connectors n/a -units require ORD for optical to RF conversion

Weight kg (lbs) 30 (66)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 266 x 483 x 551 (10.5 x 19 x 21.7)

RH305022/03A Nexus Dual Band Repeaters

Ingression Protection IP50

Temperature Range 0 to +55C

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC FCC CFR47 Parts 24, 90

Radio FCC CFR47 Parts 24, 90

APPROVALS AND TESTSSafety UL60950-1

Nexus FT Rack Mount Dual Band 1900 / 800iPS, Simplex SMA donor ports and duplexed N service ports per band.

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34 dBm 43 dBm

12 32 dBm 43 dBm

Carrier Count Power Per Carrier Composite Power

2 40 dBm 43 dBm

4 37 dBm 43 dBm

Updated: 2010-11-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.223

Page 225: Powerwave Product Catalog

POWERWAVE Nexus FT Rack Mounts

Intermodulation 9KHz - 1 GHz -13 dBm

Instantaneous Bandwidth 60 / 6 MHz

Output Power DL 2 20 W

Intermodulation 1 GHz - 12.75 GHz ETSI -13 dBm

Power Consumption 420 W typical, 500 W Max

Power Supply Options 110 - 230 VAC

Alarm LED/SNMP

Output Power DL 20 W

Frequency Band DL 1930-1990, 935-941 MHz

Frequency Band UL 1850-1910, 896-902 MHz

ELECTRICAL SPECIFICATIONS

Fiber Link Budget n/a

Gain Step Resolution 1 dB

Gain Adjustment Range UL 25 (35 - 60) dB

Gain Adjustment Range DL 25 (45 - 70) dB

RF Connectors SMA (Donor), N (Service)

Optical Connectors n/a -units require ORD for optical to RF conversion

Weight kg (lbs) 30 (66)

MECHANICAL SPECIFICATIONSDimensions HxWxD mm (in) 266 x 483 x 551 (10.5 x 19 x 21.7)

RH308022/03A Nexus Dual Band Repeaters

Ingression Protection IP50

Temperature Range 0 to +55

ENVIRONMENTAL SPECIFICATIONS

Environment ETS 300 019

EMC FCC CFR47 Parts 24, 90

Radio FCC CFR47 Parts 24, 90

APPROVALS AND TESTSSafety UL60950-1

Nexus FT Rack Mount Dual Band 1900 / 900i, Simplex SMA donor ports and duplexed N service ports per band.

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8 34 dBm 43 dBm

12 32 dBm 43 dBm

Carrier Count Power Per Carrier Composite Power

2 40 dBm 43 dBm

4 37 dBm 43 dBm

Updated: 2010-11-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.224

Page 226: Powerwave Product Catalog

Powerwave’s IP/SNML/GPS (ISG) communication interface module provides remote operation, control and monitoring of Powerwave’s repeater networks reducing the need for site visits through a very cost-effective and reliable IP and SNMP connection. The ISG interface modules improve the repeaters remote access offering Ethernet and packet switched connections and a Web craft terminal. The ISG interface can manage numerous repeaters and when integrated with Powerwave’s NetWay™ Vision, offers a complete solution for network management.

Repeater Remote Management

Power wave

Page 227: Powerwave Product Catalog

Coverage Products

POWERWAVE Repeater Remote Management

IP/SNMP/GPS Repeater Remote Management Interface

Title Power Output Modem Frequencies GPS Receiver

Part Number Page

IP/SNMP/GPS: Ethernet Interface Upgrade Option

+/- 6.5 VDC @ 2A (supplied by repeater) N/A N/A UA107 62/1 227

IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

+/- 6.5 VDC @ 2A (supplied by repeater) 900 / 1800 MHz

12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

UA107 62/2 228

IP/SNMP/GPS: 850/1900 Dual Mode Wireless CDMA Packet Data Interface

+/- 6.5 VDC @ 2A (supplied by repeater) 850 / 1900 MHz

12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

UA107 62/3 229

IP/SNMP/GPS: 850/1900 Dual Mode Wireless GPRS Packet Data Interface

+/- 6.5 VDC @ 2A (supplied by repeater) 850 / 1900 MHz

12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

UA107 62/4 230

226

Page 228: Powerwave Product Catalog

POWERWAVE Repeater Remote Management

GPS Receiver NA

Battery Backup 10 minute minimum (for communications)

Battery Change Options Continuous trickle or high charge

ELECTRICAL SPECIFICATIONSPower Input +6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies NA

Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Modem and GPS Interface NA

Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Dimensions HxWxD mm (in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

MECHANICAL SPECIFICATIONS

Repeater Interface Use existing communication ports

Operating Range -25° C to +55° C ( repeater ambient temps)

UA107 62/1 IP/SNMP/GPS: Ethernet Interface Upgrade Option

Repeater ManagementUp to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

Automated Location Based Tuning (via GPS) NA

PROCESSING

Wireless Modem Type NA

Northbound Traffic SNMP v1, v2c and http

Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Network Management NWM 3.2.2 and greater; local web interface

Packet Data Mode IP Ethernet

COMMUNICATIONS

Fallback Circuit Switched Mode NA

Networks Supported NA

Optional kit that provides wired Ethernet packet data interface for communication with Powerwave’s Netway Vision (NWV)

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-05-11 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

227

Page 229: Powerwave Product Catalog

POWERWAVE

GPS Receiver 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

Battery Backup 10 minute minimum (for communications)

Battery Change Options Continuous trickle or high charge

ELECTRICAL SPECIFICATIONSPower Input +6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies 900 / 1800 MHz

Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Modem and GPS Interface Mezzanine Board

Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007)

Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Dimensions HxWxD mm (in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

MECHANICAL SPECIFICATIONS

Repeater Interface Use existing communication and antenna ports

Operating Range -25° C to +55° C ( repeater ambient temps)

UA107 62/2 IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Repeater ManagementUp to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

Automated Location Based Tuning (via GPS) Up to 12 Repeaters

PROCESSING

Wireless Modem Type Wavecom Quik series Extended (Q24 EX001)

Northbound Traffic SNMP v1, v2c and http

Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Network Management NWM 3.2.2 and greater; local web interface

Packet Data Mode GPRS and IP Ethernet

COMMUNICATIONS

Fallback Circuit Switched Mode GSM

Networks Supported NA

Optional kit that provides GPRS wireless packet data interface for communication with Powerwave’s NetWay Vision (NWV) and automated location tuning via GPS for moving repeaters

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-05-11 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Repeater Remote Management

228

Page 230: Powerwave Product Catalog

POWERWAVE

GPS Receiver 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

Battery Backup 10 minute minimum (for communications)

Battery Change Options Continuous trickle or high charge

ELECTRICAL SPECIFICATIONSPower Input +6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies 850 / 1900 MHz

Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Modem and GPS Interface Mezzanine Board

Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Dimensions HxWxD mm (in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

MECHANICAL SPECIFICATIONS

Repeater Interface Use existing communication and antenna ports

Operating Range -25° C to +55° C ( repeater ambient temps)

UA107 62/3 IP/SNMP/GPS: 850/1900 Dual Mode Wireless CDMA Packet Data Interface

Repeater ManagementUp to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

Automated Location Based Tuning (via GPS) Up to 12 Repeaters

PROCESSING

Wireless Modem Type Wavecom Quik series (Q2438)

Northbound Traffic SNMP v1, v2c and http

Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Network Management NWM 3.2.2 and greater; local web interface

Packet Data Mode CDMA2000 1XRTT and IP ethernet

COMMUNICATIONS

Fallback Circuit Switched Mode NA

Networks Supported Verizon

Optional kit that provides CDMA wireless packet data interface for communication with Powerwave’s NetWay Vision (NWV)

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-05-11 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Repeater Remote Management

229

Page 231: Powerwave Product Catalog

POWERWAVE

GPS Receiver 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

Battery Backup 10 minute minimum (for communications)

Battery Change Options Continuous trickle or high charge

ELECTRICAL SPECIFICATIONSPower Input +6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies 850 / 1900 MHz

Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Modem and GPS Interface Mezzanine Board

Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Dimensions HxWxD mm (in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

MECHANICAL SPECIFICATIONS

Repeater Interface Use existing communication and antenna ports

Operating Range -25° C to +55° C ( repeater ambient temps)

UA107 62/4 IP/SNMP/GPS: 850/1900 Dual Mode Wireless GPRS Packet Data Interface

Repeater ManagementUp to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

Automated Location Based Tuning (via GPS) Up to 12 Repeaters

PROCESSING

Wireless Modem Type Wavecom Quik series Extended (Q24 EX001)

Northbound Traffic SNMP v1, v2c and http

Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Network Management NWM 3.2.2 and greater; local web interface

Packet Data Mode GPRS and IP Ethernet

COMMUNICATIONS

Fallback Circuit Switched Mode GSM

Networks Supported NA

Optional kit that provides GPRS wireless packet data interface for communication with Powerwave’s Netway Vision (NWV)

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-05-11 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Repeater Remote Management

230

Page 232: Powerwave Product Catalog

Antenna ProductsPower wave

A Tradition of Quality Since 1946Powerwave delivers antennas to customers around the world, offering solutions for all mobile telephony standards. Our designers and engineers build on years of experience; we have developed and manufactured top-quality antennas since 1946 from our core platform formerly under the industry leading Allgon brand name.

State of the Art Antennas are the Key to Reducing Total Cost of OwnershipThe Powerwave broadband multiband antennas offer network operators fast and successful roll-out of next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G deployment challenges, such as space and installation issues as well as various co-siting scenarios. The Powerwave broadband antenna technology simplifies logistics for network operators active in multiple markets.

Broadband

Single and Dual Band

iRET

iDiplexer

Remote Electrical Tilt (RET)

Indoor

Clean Site™ Solutions

Mounting Solutions

Page 233: Powerwave Product Catalog

Powerwave Technologies, Inc.Antenna Products

Antenna Products

Powerwave delivers antennas to customers around the world, offering solutions for all mobile telephony standards. Our designers and engineers build on years of experience; we have developed and manufactured top-quality antennas since 1946 from our core platform; formerly under the industry leading Allgon brand name.

A Tradition of Quality Since 1946

The Powerwave broadband multiband antennas offer network operators fast and successful roll-out of next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G deployment challenges, such as space and installation issues as well as various co-siting scenarios. The Powerwave broadband antenna technology simplifies logistics for network operators active in multiple markets.

State of the Art Antennas are the Key to Reducing Total Cost of Ownership

The Powerwave dual band, broadband antennas are available in a variety of designs combining a low broadband with a high broadband or a high broadband with another high broadband. The Powerwave dual band antennas are built on patented and well proven aperture-coupled patch technology and are available both as vertical polarized as well as cross polarized.

Dual Band Antennas

Easy-to-install dual band antennas from Powerwave are deployed in numerous, wireless networks worldwide. All have endured extensive field trials in close collaboration with cell planners and other communications providers to ensure Powerwave dual band antennas perform to expectations.

The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide voltage standing wave ratio (VSWR) bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provide a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.

Broadband Antennas

Antenna Products

The Powerwave single band antenna’s outstanding performance in the field derives from excellent VSWR, isolation, beam squint and tracking. This design ensures minimized intermodulation issues, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at ±45° to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, in-depth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.

Single Band Antennas

4232

Page 234: Powerwave Product Catalog

Antenna Products

Antenna Products Powerwave Technologies, Inc.

All Clean Site antennas support remote electrical tilt for optimization of the coverage footprint and tuning of network performance. By integrating all functionality into one single unit, Clean Site offers you a flexible and attractive solution in the most cost efficient way.

Clean Site solutions minimize the visual impact of a complete antenna system and significantly reduces investment and operational costs for network operators when building new or upgrading existing networks. Building permits for existing antenna installations can be used when replacing old, passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly and shortens roll-out time considerably.

Our mounting solutions consist of rugged brackets with an aesthetic design and the flexibility to address multiple situations and requirements. All Powerwave antennas are delivered with mounting brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a robust and rigid design is ensured.

Mounting Solutions

The Powerwave remote electrical tilt (RET) system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a master control unit (MCU) that controls the antenna line devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Remote Electrical Tilt Antennas (RET)

Indoor Antennas

Clean Site Solutions

The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from 800 MHz up to 2500 MHz and supports multiband operation. Easy-to-install dual band antennas from Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of discreetly functional design is an improvement over using numerous antennas of unsightly size and appearance, especially with today's aesthetic concerns.

The iRET antenna family is the next iteration of Powerwave's innovative antenna product line, which integrates remote electrical tilt functionality under the antenna radome, delivering maximized functionality and improved aesthetics, while eliminating installation and reliability issues that can occur with typical exterior RET modules.

iRET Antennas

5

iDiplexer antennas combine the performance of Powerwave’s high performing multiband antenna line and external diplexer into one product. iDiplexed antennas offer a reduced amount of connectors and feeder lines to customers who are limited in adding additional feeders due to wind load and space limitation on towers. Customers can rapidly deploy an additional overlay network by just exchanging the existing antennas with iDiplexed antennas and reusing the existing feeders. iDiplexed antennas usually combine the low band and high band frequencies into a single pair of connectors, still keeping the independent variable down tilt capability.

iDiplexer

233

Page 235: Powerwave Product Catalog

The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide voltage standing wave ratio (VSWR) bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provide a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.

Broadband AntennasPower wave

Page 236: Powerwave Product Catalog

Broadband Antennas

POWERWAVE Broadband Antennas

Single Broadband Antennas Cross Polarized PageHigh Broadband Cross Polarized Antennas, 1710-2170 MHz 236 Low Broadband Cross Polarized Antennas, 806-960 MHz 257 Low Broadband Cross Polarized Antennas, 698-894 MHz 289 Vertical Polarized PageALP Broadband Cross Polarized Antennas, 806-960 MHz 297 Dual Broadband Antennas Cross Polarized PageDual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz 299 Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz 307 Triple Broadband Antennas Cross Polarized PageTriple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz 318

235

Page 237: Powerwave Product Catalog

Single Broadband Antennas

POWERWAVE High Broadband Cross Polarized Antennas, 1710-2170 MHz

Single Broadband Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page

65 18.1/16 2° 1.3m (4'3") 5701.02 237

65 18.3/16.2 0-8° 1.3m (4'3") 5721.00 238

65 18.1/16 2-10° 1.3m (4'3") 5721.02 239

65 19.5/17.4 0-5.5° 2.0m (6'6") 5722.00 240

65 15.8/13.7 FET 0.7m (2’3”) 7700.06 241

65 18.1/16 FET 1.3m (4'3") 7701.02 242

65 18.1/16 FET 1.3m (4'3") 7701.06 243

65 18.1/16 FET 1.3m (4'3") 7721.02 244

65 18/15.9 MET 1.3m (4'3") 7721.06 245

65 18.1/16 FET 1.3m (4'3") 7721.10 246

65 18.1/16 FET 1.3m (4'3") 7701.00 247

65 18.3/16.2 MET 1.3m (4'3") 7721.00 248

65 18.3/16.2 MET 1.3m (4'3") 7721.40 249

65 18/15.9 FET 1.3m (4'3") 7701.1ST.0000.01 250

65 19.5/17.4 MET 2.0m (6'6") 7722.00 251

90 14.1/12 MET 0.7m (2'3") 7735.00A 252

90 15.6/13.5 MET 0.7m (2'3") 7720.00 253

90 15.8/13.7 FET 0.7m (2'3") 7700.00 254

90 16.7/14.6 MET 1.3m (4'3") 7740.00A 255

90 17.9/15.8 MET 2.0m (6'6") 7745.00A 256

236

Page 238: Powerwave Product Catalog

High Broadband Cross Polarized5701.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >26

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-22,typical>-18 >-22,typical>-18 >-22,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-150 -

Cross polar discrimination (XPD) ±60° (dB) >17 >14 >11

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.4/15.3 17.8/15.7 18.1/16

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19 >19 >19

Power handling, average total (W) 500

Electrical down tilt (°) 2

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.2 6.7 6.4

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.1/16

TILT: 2°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 11.5 (25.3)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 4 (8.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 7.7 (16.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-10-21© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

237

Page 239: Powerwave Product Catalog

High Broadband Cross Polarized5721.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24 typical >-18 >-24 typical >-18 >-24 typical >-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling - - -

Polarization Dual Linear ± 45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14 @ 0,2,4,6,8° >18,18,16,16,14 @ 0,2,4,6,8° >18,18,16,16,14 @ 0,2,4,6,8°

Power handling, average total (W) 500

Electrical down tilt (°) 0 - 8

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.3/16.2

TILT: 0-8°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 13.5 (29.7)

RET 8110.10, 8110.40

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5(4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6.0 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre Mounted Standard Brackets

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Rev1.01 / Mar 19 2010 Updated: 2010-06-04© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

238

Page 240: Powerwave Product Catalog

High Broadband Cross Polarized5721.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.1/16.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10° >20,20,19,19,18@2,4,6,8,10° >20,20,19,19,18@2,4,6,8,10°

Power handling, average total (W) 500

Electrical down tilt (°) 2-10

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.1/16.0

TILT: 2-10°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.5 (29.7)

RET 8110.10, 8110.40

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-06-04© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

239

Page 241: Powerwave Product Catalog

High Broadband Cross Polarized5722.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.4 0.4 0.4

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-20,typical>-16 >-20,typical>-16 >-20,typical>-16

Cross polar discrimination (XPD) 0° (dB) >19 >19 >21

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >20 >17 >12

Far field coupling - - -

Polarization Dual Slant ± 45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 19/16.9 19.2/17.1 19.5/17.4

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14@0,1,2,3,4,5° >18,18,18,16,16,14@0,1,2,3,4,5° >18,18,18,16,16,14@0,1,2,3,4,5°

Power handling, average total (W) 500

Electrical down tilt (°) 0 - 5.5

Horizontal beam width, -3 dB (°) 67 66 65

Vertical beam width, -3 dB (°) 4.7 4.4 4.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 19.5/17.4

TILT: 0-5.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 15.5 (34.1)

RET 8110.10, 8110.40

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2105x200x200 (6’11”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1934x167x89.5 (6’4”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 8.5 (18.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 416

Mounting Pre mounted standard brackets

Weight, with brackets, kg (lbs) 14 (31)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-07-06© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

240

Page 242: Powerwave Product Catalog

High Broadband Cross Polarized7700.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >26

Vertical beam squint (°) 0.6 0.6 0.6

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-26,typical>-20 >-26,typical>-20 >-26,typical>-20

Cross polar discrimination (XPD) 0° (dB) >17 >17 >19

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >17 >15 >11

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.0/12.9 15.5/13.4 15.8/13.7

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17

Power handling, average total (W) 500

Electrical down tilt (°) 6

Horizontal beam width, -3 dB (°) 67 65 64

Vertical beam width, -3 dB (°) 14.7 13.8 12.8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.8/13.7

TILT: 6°

LENGTH: 0.7m (2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 10 (22)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 880x200x200 (2’11”x 8”x 8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 709x167x89.5 (2’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 3 (6.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 133

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 6.7 (14.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

PN7700.06 Updated: 2010-10-22© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

241

Page 243: Powerwave Product Catalog

High Broadband Cross Polarized7701.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >26

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-22,typical>-18 >-22,typical>-18 >-22,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >17 >14 >11

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.4/15.3 17.8/15.7 18.1/16

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19 >19 >19

Power handling, average total (W) 500

Electrical down tilt (°) 2

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.2 6.7 6.4

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.1/16

TILT: 2°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 11.5 (25.3)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A,7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 4 (8.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 7.7 (16.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08192 Rev A Updated: 2010-12-02© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

242

Page 244: Powerwave Product Catalog

High Broadband Cross Polarized7701.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >29 >29 >29

Front to back ratio (dB) 180°±30° total power >25 >25 >25

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-26,typical>-20 >-26,typical>-20 >-26,typical>-20

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >17 >14 >11

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4 17.8/15.7 18.1/16.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18 >18 >18

Power handling, average total (W) 500

Electrical down tilt (°) 6

Horizontal beam width, -3 dB (°) 67 65 64

Vertical beam width, -3 dB (°) 7.2 6.7 6.4

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.1/16.0

TILT: 6°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 11.5 (25.3)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 4 (8.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 7.7 (16.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08193 Rev A Updated: 2010-10-22© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

243

Page 245: Powerwave Product Catalog

High Broadband Cross Polarized7721.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.1/16.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10° >20,20,19,19,18@2,4,6,8,10° >20,20,19,19,18@2,4,6,8,10°

Power handling, average total (W) 500

Electrical down tilt (°) 2-10

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.1/16.0

TILT: 2-10°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.5 (29.7)

RET 8110.10, 8110.40

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-05-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

244

Page 246: Powerwave Product Catalog

High Broadband Cross Polarized7721.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2 <2 <2

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4 17.8/15.7 18.0/15.9

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@6,8,10,12,14° >20,20,20,19,18@6,8,10,12,14° >20,20,20,19,18@6,8,10,12,14°

Power handling, average total (W) 500

Electrical down tilt (°) 6-14

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.3 6.9 6.6

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.0/15.9

TILT: 6-14°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.5 (29.7)

RET 8110.40, 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08196 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

245

Page 247: Powerwave Product Catalog

High Broadband Cross Polarized7721.10

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.1/16.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10° >20,20,19,19,18@2,4,6,8,10° >20,20,19,19,18@2,4,6,8,10°

Power handling, average total (W) 500

Electrical down tilt (°) 2-10

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.1/16.0

TILT: 2-10°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.5 (29.7)

RET 8110.40, 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting No pre-mounted bracket.

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08196 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

246

Page 248: Powerwave Product Catalog

High Broadband Cross Polarized7701.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-20,typical>-18 >-20,typical>-18 >-20,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >17 >14 >11

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.2/16.1

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >20 >20 >20

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.2 6.7 6.4

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.2/16.1

TILT: 0°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 11.5 (25.3)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 4 (8.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 7.7 (16.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08191 Rev A Updated: 2010-10-22© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

247

Page 249: Powerwave Product Catalog

High Broadband Cross Polarized7721.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,@0,2,4,6,8° >18,18,16,16,14,@0,2,4,6,8° >18,18,16,16,14,@0,2,4,6,8°

Power handling, average total (W) 500

Electrical down tilt (°) 0-8

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.3/16.2

TILT: 0-8°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.5 (29.7)

RET 8110.40, 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6.0 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Rev1.01 / Mar 19 2010 Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

248

Page 250: Powerwave Product Catalog

High Broadband Cross Polarized7721.40

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14 @ 0,2,4,6,8º >18,18,16,16,14 @ 0,2,4,6,8º >18,18,16,16,14 @ 0,2,4,6,8º

Power handling, average total (W) 500

Electrical down tilt (°) 0-8

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.3/16.2

TILT: 0-8°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.5 (29.7)

RET 7010.00, 7011.00, 7012.00

Radome colour Light grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Top

Dimensions, HxWxD, mm (ft) 1309x167x89.5 mm (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

This is the connectur up version of 7721.00

Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

249

Page 251: Powerwave Product Catalog

High Broadband Cross Polarized7701.1ST.0000.01

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30

Front to back ratio (dB) 180°±30° total power >30

Vertical beam squint (°) 0.5

Tracking, horizontal plane ±60° (dB) <1.0

First null fill (dB) >13

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 350

IM3, 2xTx@43dBm (dBc) <-150 <-150 <-150

Cross polar discrimination (XPD) ±60° (dB) >17 >14 >11

Far field coupling

Polarization Dual Slant +/- 45

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.0/14.9 18/15.9

Isolation between inputs (dB) >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR 1.4:1

Side lobe suppression, vertical 1st upper (dB) >20

Power handling, average total (W) 700

Electrical down tilt (°) 2

Horizontal beam width, -3 dB (°) 67 66 65

Vertical beam width, -3 dB (°) 7.2 6.7 6.4

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 70

Lightning protection DC Grounded

Shipping weight, kg (lbs) 11

RET

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200

Brackets

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5

Maximum operational wind speed, m/s (mph)

Connector 7/16 DIN Female

Weight, without brackets, kg (lbs)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting

Weight, with brackets, kg (lbs) 10.1

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-10-22© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

250

Page 252: Powerwave Product Catalog

High Broadband Cross Polarized7722.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.4 0.4 0.4

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-20,typical>-16 >-20,typical>-16 >-20,typical>-16

Cross polar discrimination (XPD) 0° (dB) >19 >19 >21

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >20 >17 >12

Far field coupling - - -

Polarization Dual slant ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 19.0/16.9 19.2/17.1 19.5/17.4

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14,@0,1,2,3,4,5° >18,18,18,16,16,14,@0,1,2,3,4,5° >18,18,18,16,16,14,@0,1,2,3,4,5°

Power handling, average total (W) 500

Electrical down tilt (°) 0-5.5

Horizontal beam width, -3 dB (°) 67 66 65

Vertical beam width, -3 dB (°) 4.7 4.4 4.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 19.5/17.4

TILT: 0-5.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.5 (34.1)

RET 7010.00, 7011.00, 7012.00

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2105x200x200 (6’11”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1934x167x89.5 (6’4”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 8.5 (18.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 416

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 14 (31)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08197 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

251

Page 253: Powerwave Product Catalog

High Broadband Cross Polarized7735.00A

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >25 >25 >25

Front to back ratio (dB) 180°±30° total power >23 >23 >23

Vertical beam squint (°) 0.8 0.8 0.8

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >13 >13 >12

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) -153 -153 -

Cross polar discrimination (XPD) ±60° (dB) >10 >10 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 13.6/11.5 13.8/11.7 14.1/12.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,17,16,15,14@0,4,8,12,16° >18,17,16,15,14@0,4,8,12,16° >18,17,16,15,14@0,4,8,12,16°

Power handling, average total (W) 500

Electrical down tilt (°) 0-16

Horizontal beam width, -3 dB (°) 86 86 87

Vertical beam width, -3 dB (°) 14.7 13.4 12.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.1/12.0

TILT: 0-16°

LENGTH: 0.7m (2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13 (28.6)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 880x200x200 (2’11”x8”x8”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 709x167x89.5 (2’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 133

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08198 Rev A Updated: 2010-06-30© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

252

Page 254: Powerwave Product Catalog

High Broadband Cross Polarized7720.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.5 <1.5 <1.5

First null fill (dB) >-29,typical>-25 >-29,typical>-25 >-29,typical>-25

Cross polar discrimination (XPD) 0° (dB) >15 >15 >18

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >15 >15 >13

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.0/12.9 15.1/13.0 15.6/13.5

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >17,16,16,15,15@0,4,8,12,16° >17,16,16,15,15@0,4,8,12,16° >17,16,16,15,15@0,4,8,12,16°

Power handling, average total (W) 500

Electrical down tilt (°) 0-16

Horizontal beam width, -3 dB (°) 67 65 64

Vertical beam width, -3 dB (°) 14.1 13.5 12.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.6/13.5

TILT: 0-16°

LENGTH: 0.7m (2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 11.5 (25.3)

RET 8110.40, 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 880x200x200 (2’11”x8”x8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 709x167x89.5 (2’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 4.5 (9.9)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 133

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 8.2 (18)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08194 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

253

Page 255: Powerwave Product Catalog

High Broadband Cross Polarized7700.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >26

Vertical beam squint (°) 0.6 0.6 0.6

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-20,typical>-18 >-20,typical>-18 >-20,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >19

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >17 >15 >11

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.1/13.0 15.5/13.4 15.8/13.7

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19 >19 >19

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 14.7 13.8 12.8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.8/13.7

TILT: 0°

LENGTH: 0.7m (2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 10 (22)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 880x200x200 (2’11”x 8”x 8”)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 709x167x89.5 (2’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 3 (6.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 133

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 6.7 (14.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08189 Rev A Updated: 2010-10-22© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

254

Page 256: Powerwave Product Catalog

High Broadband Cross Polarized7740.00A

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >29 >29 >29

Front to back ratio (dB) 180°±30° total power >23 >23 >23

Vertical beam squint (°) 0.4 0.4 0.4

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >14 >14 >12

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >10 >10 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.2/14.1 16.4/14.3 16.7/14.6

Isolation between inputs (dB) 30 30 30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,17,15,15,14@0,2,4,6,8° >18,17,15,15,14@0,2,4,6,8° >18,17,15,15,14@0,2,4,6,8°

Power handling, average total (W) 500

Electrical down tilt (°) 0-8

Horizontal beam width, -3 dB (°) 86 86 86

Vertical beam width, -3 dB (°) 7.1 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.7/14.6

TILT: 0-8°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.5 (34.1)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (4’10”x8”x8”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 8 (17.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 11.7 (25.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Rev1.01 / May 07 2010 Updated: 2010-06-30© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

255

Page 257: Powerwave Product Catalog

High Broadband Cross Polarized7745.00A

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >29 >29 >29

Front to back ratio (dB) 180°±30° total power >23 >23 >23

Vertical beam squint (°) 0.3 0.3 0.3

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >14 >14 >12

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >10 >10 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4 17.6/15.5 17.9/15.8

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,14,@0,1,2,3,4,5° >18,18,16,16,14,14,@0,1,2,3,4,5° >18,18,16,16,14,14,@0,1,2,3,4,5°

Power handling, average total (W) 500

Electrical down tilt (°) 0-5.5

Horizontal beam width, -3 dB (°) 86 86 86

Vertical beam width, -3 dB (°) 4.7 4.5 4.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.9/15.8

TILT: 0-5.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.6)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2105x200x200 (6’11”x8”x8”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1934x167x89.5 (6’4”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 10.4 (22.9)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 416

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 15.9 (35)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08200 Rev A Updated: 2010-06-30© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

256

Page 258: Powerwave Product Catalog

Single Broadband Antennas

POWERWAVE Low Broadband Cross Polarized Antennas, 806-960 MHz

Single Broadband Antennas Cross Polarized Low Broadband Cross Polarized Antennas, 806-960 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 14.6/12.5, 15/12.9 2-12° 1.3m (4'3") 5471.00 259

65 17.1/15.0, 17.5/15.4 0-7.5° 2.0m (6'6") 5472.00 260

65 17.7/15.6, 18.5/46.4 0-0.5° 2.6m (8'6") 5473.00 261

65 16.5/14.4, 17.0/14.9 0° 2.0m (6'6") 5477.00 262

65 17.4/15.3, 18.1/16.0 0° 2.6m (8'6") 5478.00 263

65 17.4/15.2, 18.0/15.8 6° 2.6m (8'6") 5478.06 264

90 16.6/14.5, 17.0/14.9 0-0.5° 2.6m (8'6") 5483.00 265

90 16.6/14.5, 17.1/15.0 0° 2.6m (8'6") 5488.00 266

65 14.6/12.5, 15.1/13 FET 1.3m (4'3") 7476.06 267

65 14.6/12.5, 15/12.9 MET 1.3m (4'3") 7471.00 268

65 15.6/13.5, 16.2/14.1 FET 2.0m (6'6") 7477.00 269

65 15.8/13.7, 16.3/14.2 FET 2.0m (6'6") 7477.02 270

65 16.9/14.8, 17.3/15.2 FET 2.0m (6'6") 7478.00 271

65 16/13.9, 16.5/14.4 MET 2.0m (6'6") 7472.00 272

65 16/13.9, 16.5/14.4 FET 2.0m (6'6") 7477.06 273

65 17/14.9, 17.4/15.3 FET 2.6m (8'6") 7478.02 274

65 17/14.9, 17.4/15.3 FET 2.6m (8'6") 7478.06 275

66 17.2/15.1, 17.5/15.4 MET 2.6m (8'6") 7473.00 276

90 13.5/11.4, 14/11.9 MET 1.3m (4'3") 7481.00 277

90 13.5/11.4, 14/11.9 FET 1.4m (4'7") 7486.00 278

90 13.6/11.5, 14.1/12 FET 1.4m (4'7") 7486.02 279

90 13.6/11.5, 14/11.9 FET 1.4m (4'7") 7486.06 280

90 14.8/12.7, 15.4/13.3 FET 2.0m (6'6") 7487.00 281

90 14.8/12.7, 15.5/13.4 MET 2.0m (6'6") 7482.00 282

90 15.8/13.7, 16.3/14.2 FET 2.6m (8'6") 7488.00 283

90 15.8/13.7, 16.3/14.2 FET 2.6m (8'6") 7488.02 284

90 15.9/13.8, 16.3/14.2 MET 2.6m (8'6") 7483.00 285

257

Page 259: Powerwave Product Catalog

Single Broadband Antennas

POWERWAVE Low Broadband Cross Polarized Antennas, 806-960 MHz

Single Broadband Antennas Cross Polarized Low Broadband Cross Polarized Antennas, 806-960 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 90 15.9/13.8, 16.4/14.3 FET 2.6m (8'6") 7488.06 286

90 15/12.9, 15.5/13.4 FET 2.0m (6'6") 7487.02 287

90 15/12.9, 15.5/13.4 FET 2.0m (6'6") 7487.06 288

258

Page 260: Powerwave Product Catalog

Low Broadband Cross Polarized5471.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >25 >25

Front to back ratio (dB) 180°±30° total power >24 >25

Vertical beam squint (°) 1 1

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

First null fill (dB) >-25 >-25

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.6/12.5 15.0/12.9

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 2 - 12

Side lobe suppression, vertical 1st upper (dB) >19,18,17@2,7,12° >19,18,17@2,7,12°

Vertical beam width, -3 dB (°) 15.3 14.2

VSWR 1.5:1

Horizontal beam width, -3 dB (°) 65 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.6/12.5, 15.0/12.9

TILT: 2-12°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18.5 (40.7)

RET 8110.10, 8110.40

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1475x355x255 (4’10”x1’2”x10”)

Brackets 7256.00, 7454.00A, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1270x280x125 (4’2”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9 (19.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 367

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.5 (31.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-07-06© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

259

Page 261: Powerwave Product Catalog

Low Broadband Cross Polarized5472.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.1/15.0 17.5/15.4

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 0 - 7.5

Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,4,7° >20,17,15@0,4,7°

Vertical beam width, -3 dB (°) 9.6 9.2

VSWR 1.5:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.1/15.0, 17.5/15.4

TILT: 0-7.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 24.5 (54)

RET 8110.10 (AISG1.1), 8110.40 (AISG2.0)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2080x280x125 (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14.5 (31.9)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664 / 102 / 798

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 20 (44)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-09-22© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

260

Page 262: Powerwave Product Catalog

Low Broadband Cross Polarized5473.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

First null fill (dB) >-18 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.7/15.6 18.5/16.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 0-5.5

Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5° >20,17,15@0,2,5°

Vertical beam width, -3 dB (°) 7.5 7

VSWR 1.5:1

Horizontal beam width, -3 dB (°) 67 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.7/15.6, 18.5/16.4

TILT: 0-5.5°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 25 (55.1)

RET 8110.10, 8110.40

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00A, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 15.5 (34.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 21 (46.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-09-22© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

261

Page 263: Powerwave Product Catalog

Low Broadband Cross Polarized5477.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >34

Front to back ratio (dB) 180°±30° total power >26 >28

Vertical beam squint (°) 0.3 0.2

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-18 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >13 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.5/14.4 17.0/14.9

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 9.8 9.2

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4, 17.0/14.9

TILT: 0°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 13.0 (28.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18.5 (40.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-07-06© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

262

Page 264: Powerwave Product Catalog

Low Broadband Cross Polarized5478.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >31 >36

Front to back ratio (dB) 180°±30° total power >29 >29

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-18 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.4/15.3 18.1/16.0

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.3 7.0

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 18.1/16.0

TILT: 0°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17 (37.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 22.5 (49.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-07-06© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

263

Page 265: Powerwave Product Catalog

Low Broadband Cross Polarized5478.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >28 >27

Vertical beam squint (°) 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <1.0

First null fill (dB) <-20 <-20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 300

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.4/15.2 18.0/15.8

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 6

Side lobe suppression, vertical 1st upper (dB) >15 >15

Vertical beam width, -3 dB (°) 7.5 7.0

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 68 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.2, 18.0/15.8

TILT: 6°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 25.5 (53.5)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14.5 (30.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.7 (41.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-07-06© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

264

Page 266: Powerwave Product Catalog

Low Broadband Cross Polarized5483.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >28

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-23 >-21

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >21 >21

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.6/14.5 17.0/14.9

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 0 - 5.5

Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5° >20,17,15@0,2,5°

Vertical beam width, -3 dB (°) 7.5 6.9

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 90 90

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.6/14.5, 17.0/14.9

TILT: 0-5.5°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 31.5 (69.4)

RET 8110.10, 8110.40

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 21 (46.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 26.5 (58.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-07-16© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

265

Page 267: Powerwave Product Catalog

Low Broadband Cross Polarized5488.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >27

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.2 0.1

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-18 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.6/14.5 17.1/15.0

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.6 7.0

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.6/14.5, 17.1/15.0

TILT: 0°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 29.5 (65)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255(8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19 (41.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 24.5 (54)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2010-07-06© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

266

Page 268: Powerwave Product Catalog

Low Broadband Cross Polarized7476.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 1 1

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) <-25 <-25

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.6/12.5 15.1/13

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 6

Side lobe suppression, vertical 1st upper (dB) >19 >19

Vertical beam width, -3 dB (°) 15.3 13.9

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.6/12.5, 15.1/13

TILT: 6°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.6)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1475x355x255 (4’10”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1270x280x125 (4’2”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 8.5 (18.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 367

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14 (30.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08165 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

267

Page 269: Powerwave Product Catalog

Low Broadband Cross Polarized7471.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >25 >25

Front to back ratio (dB) 180°±30° total power >24 >25

Vertical beam squint (°) 1 1

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

First null fill (dB) <-25 <-25

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.6/12.5 15/12.9

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 2-12

Side lobe suppression, vertical 1st upper (dB) >19,18,17@2,7,12° >19,18,17@2,7,12°

Vertical beam width, -3 dB (°) 15.3 14.2

VSWR 1.5:1

Horizontal beam width, -3 dB (°) 65 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.6/12.5, 15/12.9

TILT: 2-12°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18.5 (40.7)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1475x355x255 (4’10”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1330x280x125 (4’4”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9 (19.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 367

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.5 (31.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08184 Rev A Updated: 2010-04-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

268

Page 270: Powerwave Product Catalog

Low Broadband Cross Polarized7477.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.6/13.5 16.2/14.1

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 9.5 9

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.6/13.5, 16.2/14.1

TILT: 0°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 13 (28.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18.5 (40.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08166 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

269

Page 271: Powerwave Product Catalog

Low Broadband Cross Polarized7477.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.8/13.7 16.3/14.2

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 2

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 9.5 9

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2

TILT: 2°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 13 (28.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18.5 (40.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08167 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

270

Page 272: Powerwave Product Catalog

Low Broadband Cross Polarized7478.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-18 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.9/14.8 17.3/15.2

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.3 7

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.9/14.8, 17.3/15.2

TILT: 0°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17 (37.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 22.5 (49.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08169 Rev A Updated: 2010-12-02© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

271

Page 273: Powerwave Product Catalog

Low Broadband Cross Polarized7472.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16/13.9 16.5/14.4

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0-7.5

Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,4,7° >20,17,15@0,4,7°

Vertical beam width, -3 dB (°) 10 9

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 67 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16/13.9, 16.5/14.4

TILT: 0-7.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 24.5 (54)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2080x280x125 (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14.5 (31.9)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 20 (44)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08185 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

272

Page 274: Powerwave Product Catalog

Low Broadband Cross Polarized7477.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16/13.9 16.5/14.4

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 6

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 9.5 9

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16/13.9, 16.5/14.4

TILT: 6°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 13 (28.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18.5 (40.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08168 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

273

Page 275: Powerwave Product Catalog

Low Broadband Cross Polarized7478.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17/14.9 17.4/15.3

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 2

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.3 7

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17/14.9, 17.4/15.3

TILT: 2°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17 (37.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 22.5 (49.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08170 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

274

Page 276: Powerwave Product Catalog

Low Broadband Cross Polarized7478.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17/14.9 17.4/15.3

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 6

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.3 7

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 66 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17/14.9, 17.4/15.3

TILT: 6°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17 (37.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 22.5 (49.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08171 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

275

Page 277: Powerwave Product Catalog

Low Broadband Cross Polarized7473.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Power handling, average total (W) 800

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.2/15.1 17.5/15.4

Isolation between inputs (dB) 30 30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0-5.5

Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5° >20,17,15@0,2,5°

Vertical beam width, -3 dB (°) 7.5 7

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 67 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.2/15.1, 17.5/15.4

TILT: 0-5.5°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 28 (61.7)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x280x125 (8’4”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 18.5 (40.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 24 (52.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08186 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

276

Page 278: Powerwave Product Catalog

Low Broadband Cross Polarized7481.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >27

Front to back ratio (dB) 180°±30° total power >23 >23

Vertical beam squint (°) 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2 <2

First null fill (dB) <-18 <-18

IM3, 2xTx@43dBm (dBc) -150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) - -

Cross polar discrimination (XPD) ±60° (dB) >9 >9

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 13.5/11.4 14/11.9

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 2-12

Side lobe suppression, vertical 1st upper (dB) >19,18,17@2,7,12° >19,18,17@2,7,12°

Vertical beam width, -3 dB (°) 15 14

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 85

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.5/11.4, 14/11.9

TILT: 2-12°

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 22.5 (49.6)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1475x355x255 (4’10”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1270x280x125 (4’2”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 13 (28.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 367

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18.5 (40.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08183 Rev A Updated: 2010-04-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

277

Page 279: Powerwave Product Catalog

Low Broadband Cross Polarized7486.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >27

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.6 0.4

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-21 >-25

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >21 >21

Cross polar discrimination (XPD) ±60° (dB) >10 >11

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 13.5/11.4 14/11.9

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 15.5 14

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.5/11.4, 14/11.9

TILT: 0°

LENGTH: 1.4m (4’7”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 20.5 (45.1)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1475x355x255 (4’10”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1270x280x125 (4’2”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 11 (24.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 367

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 16.5 (36.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08172 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

278

Page 280: Powerwave Product Catalog

Low Broadband Cross Polarized7486.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >28 >28

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.4 0.4

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-23 >-25

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >21 >21

Cross polar discrimination (XPD) ±60° (dB) >10 >11

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 13.6/11.5 14.1/12

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 2

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 15.4 14

VSWR 1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.6/11.5, 14.1/12

TILT: 2°

LENGTH: 1.4m (4’7”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 20.5 (45.1)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1475x355x255 (4’10”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1270x280x125 (4’2”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 11 (24.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 367

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 16.5 (36.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08173 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

279

Page 281: Powerwave Product Catalog

Low Broadband Cross Polarized7486.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >28

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.6 0.6

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-25 >-25

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >22 >22

Cross polar discrimination (XPD) ±60° (dB) >10 >11

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 13.6/11.5 14/11.9

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 6

Side lobe suppression, vertical 1st upper (dB) >18 >18

Vertical beam width, -3 dB (°) 15.5 13.9

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 85

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.6/11.5, 14/11.9

TILT: 6°

LENGTH: 1.4m (4’7”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 20.5 (45.1)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1475x355x255 (4’10”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1270x280x125 (4’2”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 11 (24.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 367

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 16.5 (36.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08174 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

280

Page 282: Powerwave Product Catalog

Low Broadband Cross Polarized7487.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >28 >29

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.1 0.2

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-20 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.8/12.7 15.4/13.3

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 9.7 9

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.8/12.7, 15.4/13.3

TILT: 0°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 25 (55.1)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 15 (33)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 20.5 (45.1)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08175 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

281

Page 283: Powerwave Product Catalog

Low Broadband Cross Polarized7482.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >27

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.4 0.4

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-25 >-20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.8/12.7 15.5/13.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 870-960

Electrical down tilt (°) 0-7.5

Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,4,7° >20,17,15@0,4,7°

Vertical beam width, -3 dB (°) 9.6 9

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 88 86

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.8/12.7, 15.5/13.4

TILT: 0-7.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17 (37.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 22.5 (49.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08187 Rev A Updated: 2010-04-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

282

Page 284: Powerwave Product Catalog

Low Broadband Cross Polarized7488.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >27

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.2 0.1

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-18 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >21 >21

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.8/13.7 16.3/14.2

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.6 7

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2

TILT: 0°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 29.5 (65)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19 (41.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 24.5 (54)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08178 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

283

Page 285: Powerwave Product Catalog

Low Broadband Cross Polarized7488.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >26 >27

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.3 0.2

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-18 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.8/13.7 16.3/14.2

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 2

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.6 7

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2

TILT: 2°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 29.5 (65)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19 (41.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 24.5 (54)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08179 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

284

Page 286: Powerwave Product Catalog

Low Broadband Cross Polarized7483.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >27 >28

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.3 0.3

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-23 >-21

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >21 >21

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.9/13.8 16.3/14.2

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 0-5.5

Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5° >20,17,15@0,2,5°

Vertical beam width, -3 dB (°) 7.5 6.9

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.9/13.8, 16.3/14.2

TILT: 0-5.5°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 31.5 (69.4)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 21 (46.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 26.5 (58.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08188 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

285

Page 287: Powerwave Product Catalog

Low Broadband Cross Polarized7488.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >26 >27

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.1 0.2

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-20 >-20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.9/13.8 16.4/14.3

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 6

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 7.6 7

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.9/13.8, 16.4/14.3

TILT: 6°

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 29.5 (65)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2725x355x255 (8’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2520x280x125 (8’3”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19 (41.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 835

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 24.5 (54)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08180 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

286

Page 288: Powerwave Product Catalog

Low Broadband Cross Polarized7487.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >28 >29

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.3 0.2

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-20 >-18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15/12.9 15.5/13.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 2

Side lobe suppression, vertical 1st upper (dB) >20 >20

Vertical beam width, -3 dB (°) 9.7 9

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9, 15.5/13.4

TILT: 2°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 25 (55.1)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 15 (33)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 20.5 (45.1)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08176 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

287

Page 289: Powerwave Product Catalog

Low Broadband Cross Polarized7487.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Front to back ratio (dB) 180°±30° copolar >28 >28

Front to back ratio (dB) 180°±30° total power >22 >22

Vertical beam squint (°) 0.1 0.2

Tracking, horizontal plane ±60° (dB) <1.0 <1.0

First null fill (dB) >-20 >-20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 400

Far field coupling - -

Cross polar discrimination (XPD) 0° (dB) >20 >20

Cross polar discrimination (XPD) ±60° (dB) >10 >10

Power handling, average total (W) 600

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15/12.9 15.5/13.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 806-896 880-960

Electrical down tilt (°) 6

Side lobe suppression, vertical 1st upper (dB) >17 >20

Vertical beam width, -3 dB (°) 9.7 9

VSWR <1.4:1

Horizontal beam width, -3 dB (°) 87 84

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9, 15.5/13.4

TILT: 6°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 25 (55.1)

RET -

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2225x355x255 (7’3”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2020x280x125 (6’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 15 (33)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 664

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 20.5 (45.1)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

D031-08177 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

288

Page 290: Powerwave Product Catalog

POWERWAVE

Single Broadband Antennas

Low Broadband Cross Polarized Antennas, 698-894 MHz

Single Broadband Antennas Cross Polarized Low Broadband Cross Polarized Antennas, 698-894 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 14.5/12.4 2° 1.2m(48”) P65-15-XL-2 290

65 14.5/12.4 4° 1.2m(48”) P65-15-XL-4 291

65 16.0/13.9 2° 1.8m(72”) P65-16-XL-2 292

65 16.0/13.9 4° 1.8m(72”) P65-16-XL-4 293

65 16.0/13.9 6° 1.8m(72”) P65-16-XL-6 294

65 17.5/15.4 2° 2.4m(96”) P65-17-XL-2 295

65 17.5/15.4 4° 2.4m(96”) P65-17-XL-4 296

289

Page 291: Powerwave Product Catalog

Very Low Broadband AntennasP65-15-XL-2

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 30 > 30

First null fill (dB) - -

Tracking, horizontal plane ±60° (dB) < 2 < 2

Isolation between inputs (dB) > 30 > 30

IM3, 2xTx@43dBm (dBc) -153

Power handling, average per input (W) 400

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Front to back ratio (dB) 180°±30° total power > 25 > 25

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Polarization Dual Linear +/- 45

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.0/11.9 14.5/12.4

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

Frequency band (MHz) 698-806 806-894

Electrical down tilt (°) 2

Power handling, average total (W) 800

Vertical beam width, -3 dB (°) 16.5 15.5

VSWR < 1.33:1

Horizontal beam width, -3 dB (°) 68 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4

TILT: 2°

LENGTH: 1.2m (48”)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 125 (55)

Lightning protection DC Ground

Shipping weight, lbs (kg) 44 (22)

RET N/A

Packet size, HxWxD, in (mm) 58” x 16” x 10” (1475 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 48”x12”x5” (1219x305x125)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 22 (10)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 400

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 33 (15)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2008-08-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

290

Page 292: Powerwave Product Catalog

Very Low Broadband AntennasP65-15-XL-4

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 30 > 30

First null fill (dB) - -

Tracking, horizontal plane ±60° (dB) < 2 < 2

Isolation between inputs (dB) > 30 > 30

IM3, 2xTx@43dBm (dBc) -153

Power handling, average per input (W) 400

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Front to back ratio (dB) 180°±30° total power > 25 > 25

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Polarization Dual Linear +/- 45

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.0/11.9 14.5/12.4

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

Frequency band (MHz) 698-806 806-894

Electrical down tilt (°) 4

Power handling, average total (W) 800

Vertical beam width, -3 dB (°) 16.5 15.5

VSWR < 1.33:1

Horizontal beam width, -3 dB (°) 68 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4

TILT: 4°

LENGTH: 1.2m (48”)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 125 (55)

Lightning protection DC Ground

Shipping weight, lbs (kg) 44 (20)

RET N/A

Packet size, HxWxD, in (mm) 58” x 16” x 10” (1475 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 48”x12”x5” (1219x305x125)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 22 (10)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 400

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 33 (15)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2008-08-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

291

Page 293: Powerwave Product Catalog

Very Low Broadband AntennasP65-16-XL-2

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 30 > 30

Tracking, horizontal plane ±60° (dB) < 2 < 2

Electrical Downtilt Range 2 2

Front to back ratio (dB) 180°±30° total power > 25 > 25

IM3, 2xTx@43dBm (dBc) -153

Power handling, average per input (W) 400

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Power handling, average total (W) 800

Gain (dBi/dBd) 15.5/13.4 16.0/13.9

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Isolation between inputs (dB) > 30 > 30

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 10.5 9.5

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

VSWR < 1.33: 1 < 1.33: 1

Horizontal beam width, -3 dB (°) 68 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.0/13.9

TILT: 2°

LENGTH: 1.8m (72”)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 125 (55)

Lightning protection DC Ground

Shipping weight, lbs (kg) 55 (25)

RET N/A

Packet size, HxWxD, in (mm) 82” x 16” x 10” (2082 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 72” x 12” x 5” (1829 x 305 x 125)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 33 (15)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 680

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 44 (20)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2008-08-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

292

Page 294: Powerwave Product Catalog

Very Low Broadband AntennasP65-16-XL-4

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 30 > 30

Tracking, horizontal plane ±60° (dB) < 2 < 2

Electrical Downtilt Range 4

Front to back ratio (dB) 180°±30° total power > 25 > 25

IM3, 2xTx@43dBm (dBc) -153

Power handling, average per input (W) 400

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Power handling, average total (W) 800

Gain (dBi/dBd) 15.5/13.4 16.0/13.9

Polarization Dual Linear +/- 45

Isolation between inputs (dB) > 30 > 30

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50

Vertical beam width, -3 dB (°) 10.5 9.5

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

VSWR < 1.33: 1

Horizontal beam width, -3 dB (°) 68 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.0/13.9

TILT: 4°

LENGTH: 72”

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 125 (55)

Lightning protection DC Ground

Shipping weight, lbs (kg) 55 (25)

RET N/A

Packet size, HxWxD, in (mm) 82” x 16” x 10” (2082 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 72” x 12” x 5” (1829 x 305 x 125)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 33 (15)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 1380

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 44 (20)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2008-08-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

293

Page 295: Powerwave Product Catalog

Very Low Broadband AntennasP65-16-XL-6

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 30 > 30

Tracking, horizontal plane ±60° (dB) < 2 < 2

Electrical Downtilt Range 6 6

Front to back ratio (dB) 180°±30° total power > 25 > 25

IM3, 2xTx@43dBm (dBc) -153

Power handling, average per input (W) 400

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Power handling, average total (W) 800

Gain (dBi/dBd) 15.5/13.4 16.0/13.9

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Isolation between inputs (dB) > 30 > 30

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 10.5 9.5

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

VSWR < 1.33: 1 < 1.33: 1

Horizontal beam width, -3 dB (°) 68 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.0/13.9

TILT: 6°

LENGTH: 1.8m (72”)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 125 (55)

Lightning protection DC Ground

Shipping weight, lbs (kg) 55 (25)

RET N/A

Packet size, HxWxD, in (mm) 82” x 16” x 10” (2082 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 72” x 12” x 5” (1829 x 305 x 125)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 33 (15)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 680

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 44 (20)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

Updated: 2008-08-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

294

Page 296: Powerwave Product Catalog

Updated: 2008-08-27

Very Low Broadband AntennasP65-17-XL-2

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 30 > 30

Isolation between inputs (dB) > 30 > 30

Tracking, horizontal plane ±60° (dB) < 2 < 2

Front to back ratio (dB) 180°±30° total power > 25 > 25

IM3, 2xTx@43dBm (dBc) -153

Power handling, average per input (W) 400

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Power handling, average total (W) 800

Gain (dBi/dBd) 16.5/14.4 17.5/15.4

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 8.5 7.5

Electrical down tilt (°) 2 2

VSWR < 1.33:1 < 1.33:1

Horizontal beam width, -3 dB (°) 68 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.5/15.4

TILT: 2°

LENGTH: 2.4m (96”)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 125 (55)

Lightning protection DC Ground

Shipping weight, lbs (kg) 65 (30)

RET N/A

Packet size, HxWxD, in (mm) 107” x 16” x 10” (2725 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 96” x 12” x 5” (2438 x 305 x 125)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 43 (20)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 880

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 54 (25)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

295

Page 297: Powerwave Product Catalog

Updated: 2008-08-27

Very Low Broadband AntennasP65-17-XL-4

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 30 > 30

Isolation between inputs (dB) > 30 > 30

Tracking, horizontal plane ±60° (dB) < 2 < 2

Front to back ratio (dB) 180°±30° total power > 25 > 25

IM3, 2xTx@43dBm (dBc) -153

Power handling, average per input (W) 400

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Power handling, average total (W) 800

Gain (dBi/dBd) 16.5/14.4 17.5/15.4

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 8.5 7.5

Electrical down tilt (°) 4 4

VSWR < 1.33:1 < 1.33:1

Horizontal beam width, -3 dB (°) 68 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.5/15.4

TILT: 4°

LENGTH: 2.4m (96”)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 125 (55)

Lightning protection DC Ground

Shipping weight, lbs (kg) 65 (30)

RET N/A

Packet size, HxWxD, in (mm) 107” x 16” x 10” (2725 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 96” x 12” x 5” (2438 x 305 x 125)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 43 (20)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 880

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 54 (25)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

296

Page 298: Powerwave Product Catalog

Single Broadband Antennas

POWERWAVE ALP Broadband Vertical Polarized Antennas, 806-960 MHz

Single Broadband Antennas Vertical Polarized ALP Broadband Vertical Polarized Antennas, 806-960 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 80 14.5/12.4 FET 1.3m (4'4") 7824.00 298

297

Page 299: Powerwave Product Catalog

ALP Broadband Vertical Polarized7824.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-960

Side lobe suppression, vertical 1st upper (dB) >18 >18

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 15 15

First null fill (dB) none none

IM3, 2xTx@43dBm (dBc) <-146

Front to back ratio (dB) 180°±30° copolar >28 >28

Vertical beam squint (°) <0.2 <0.2

Gain (dBi/dBd) 14.5/12.4 14.5/12.4

Frequency band (MHz) 806-896 880-960

Horizontal beam width, -3 dB (°) 80 80

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.4:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4

TILT: FET

LENGTH: 1.3m (4’4”)

POLARIZATION: Vertical Pol

FREQUENCY (MHz): 806-960

HORIZONTAL BEAM WIDTH (°): 80

Lightning protection DC grounded

Operating Temperature

Brackets 7256.00, 2210.10

Survival wind speed, m/s (mph) 55 (123)

Package size, HxWxD, mm (ft) 1346x360x335 (4’5”x1’2”x1’1”)

Shipping weight, kg (lbs) 13 (28.6)

Radome material PVC

Radome colour Light Gray

Connector position Back

Dimensions, HxWxD, mm (ft) 1320x330x290 (4’4”x1’1”x11”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 7.4 (16.3)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 490

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 12.9 (28.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D_ Updated: 2010-03-31

298

Page 300: Powerwave Product Catalog

Dual Broadband Antennas

POWERWAVE Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz

Dual Broadband Antennas Cross Polarized Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 17.7/15.6, 17.7/15.6, 17.9/15.8 MET 1.3m (4'3") 7760.02 300

65 17.7/15.6, 17.9/15.8, 18.1/16 MET 1.3m (4'3") 7760.00 301

65 18/15.9 MET 1.3m (4'3") 7760.03 302

65 18/15.9 MET 1.3m (4'3") 7760.06 303

65 19/16.9, 19.2/17.1, 19.4/17.3 MET 2.0m (6'6") 7765.00 304

90 16.1/14, 16.2/14.1, 16.5/14.4 MET 1.3m (4'3") 7762.00 305

90 17.4/15.3, 17.5/15.4, 17.7/15.6 MET 2.0m (6'6") 7766.00 306

299

Page 301: Powerwave Product Catalog

Dual High Broadband Cross Polarized7760.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >28 >28 >28

Front to back ratio (dB) 180°±30° total power >28 >28 >28

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >20

IM7, 2xTx@43dBm (dBc) <-160 <-160 <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >16 >13 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.7/15.6 17.7/15.6 17.9/15.8

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10° >19,19,18,17,16@2,4,6,8,10° >19,19,18,17,16@2,4,6,8,10°

Power handling, average total (W) 1000

Electrical down tilt (°) 2-10

Horizontal beam width, -3 dB (°) 67 65 63

Vertical beam width, -3 dB (°) 7.1 6.8 6.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8

TILT: 2-10°

LENGTH: 1.3m (4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x400x200 (4’8”x1’3”x7”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x343x100 (4’4”x1’1”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 520

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (42.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

Updated: 2010-05-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

300

Page 302: Powerwave Product Catalog

Dual High Broadband Cross Polarized7760.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >28 >28 >28

Front to back ratio (dB) 180°±30° total power >28 >28 >28

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >20

IM7, 2xTx@43dBm (dBc) <-160 <-160 <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >16 >13 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14@0,2,4,6,8° >22,20,18,16,14@0,2,4,6,8° >22,20,18,16,14@0,2,4,6,8°

Power handling, average total (W) 1000

Electrical down tilt (°) 0-8

Horizontal beam width, -3 dB (°) 67 65 64

Vertical beam width, -3 dB (°) 7.1 6.8 6.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0

TILT: 0-8°

LENGTH: 1.3m (4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23.5 (51.8)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x430x250 (4’8”x1’3”x9”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x343x100 (4’4”x1’1”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 520

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (42.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08204 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

301

Page 303: Powerwave Product Catalog

Dual High Broadband Cross Polarized7760.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >28 >28 >28

Front to back ratio (dB) 180°±30° total power >28 >28 >28

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >16 >13 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.7/15.6 17.7/15.6 17.9/15.8

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10° >19,19,18,17,16@2,4,6,8,10° >19,19,18,17,16@2,4,6,8,10°

Power handling, average total (W) 1000

Electrical down tilt (°) 2 to 10 and 6 to 14

Horizontal beam width, -3 dB (°) 67 65 63

Vertical beam width, -3 dB (°) 7.1 6.8 6.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8

TILT: 2-10°/6-14°

LENGTH: 1.3m (4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x400x200 (4’8”x1’3”x7”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x343x100 (4’4”x1’1”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 520

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (42.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08204 Rev. A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

302

Page 304: Powerwave Product Catalog

Dual High Broadband Cross Polarized7760.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >28 >28 >28

Front to back ratio (dB) 180°±30° total power >28 >28 >28

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >20

IM7, 2xTx@43dBm (dBc) - - <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 -

Cross polar discrimination (XPD) ±60° (dB) >16 >13 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.7/15.6 17.7/15.6 17.9/15.8

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >17,16@6,8,10° >17,16@6,8,10° >17,16@6,8,10°

Power handling, average total (W) 1000

Electrical down tilt (°) 6-14

Horizontal beam width, -3 dB (°) 67 65 63

Vertical beam width, -3 dB (°) 7.1 6.8 6.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8

TILT: 6-14°

LENGTH: 1.3m (4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x400x200 (4’8”x1’3”x7”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) x343x100 (4’4”x1’1”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 520

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (42.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08204 Rev. A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

303

Page 305: Powerwave Product Catalog

Dual High Broadband Cross Polarized7765.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >28 >28 >28

Front to back ratio (dB) 180°±30° total power >28 >28 >28

Vertical beam squint (°) <0.5 <0.5 <0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-22,typical>-18 >-22,typical>-18 >-22,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >20

IM7, 2xTx@43dBm (dBc) <-160 <-160 <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >16 >13 >10

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 19.0/16.9 19.2/17.1 19.4/17.3

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,15,13@0,1,2,3,4,5° >22,20,18,16,15,14@0,1,2,3,4,5° >22,20,18,16,15,14@0,1,2,3,4,5°

Power handling, average total (W) 1000

Electrical down tilt (°) 0-5.5

Horizontal beam width, -3 dB (°) 67 65 63

Vertical beam width, -3 dB (°) 4.7 4.4 4.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 19.0/16.9, 19.2/17.1, 19.4/17.3

TILT: 0-5.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2085x430x250 (6’10”x1’3”x9”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1934x343x100 (6’4”x11”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17 (37.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 819

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 22.5 (49.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08206 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

304

Page 306: Powerwave Product Catalog

Dual High Broadband Cross Polarized7762.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >24 >25 >26

Front to back ratio (dB) 180°±30° total power >23 >23 >23

Vertical beam squint (°) <0.5 <0.5 <0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-25,typical>-18 >-25,typical>-18 >-25,typical>-18

Cross polar discrimination (XPD) 0° (dB) >17 >17 >12

IM7, 2xTx@43dBm (dBc) <-160 <-160 <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >7 >7 >7

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.1/14.0 16.2/14.1 16.5/14.4

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >17,17,16,15,14@0,2,4,6,8° >17,17,16,15,14@0,2,4,6,8° >20,18,17,16,15@0,2,4,6,8°

Power handling, average total (W) 1000

Electrical down tilt (°) 0-8

Horizontal beam width, -3 dB (°) 89 93 90

Vertical beam width, -3 dB (°) 7.0 6.7 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.1/14.0, 16.2/14.1, 16.5/14.4

TILT: 0-8°

LENGTH: 1.3m (4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x400x200 (4’8”x1’3”x7”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x343x100 (4’4”x1’1”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 18 (39.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 520

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 23.5 (51.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08204 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

305

Page 307: Powerwave Product Catalog

Dual High Broadband Cross Polarized7766.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >25 >25 >25

Front to back ratio (dB) 180°±30° total power >23 >23 >23

Vertical beam squint (°) <0.5 <0.5 <0.5

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-25,typical>-18 >-25,typical>-18 >-25,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >12

IM7, 2xTx@43dBm (dBc) <-160 <-160 <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >8 >8 >8

Far field coupling - - -

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.4/15.3 17.5/15.4 17.7/15.6

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,15,14,13,11@0,1,2,3,4,5° >20,20,17,16,14,14@0,1,2,3,4,5° >22,20,18,16,15,14@0,1,2,3,4,5°

Power handling, average total (W) 1000

Electrical down tilt (°) 0-5.5

Horizontal beam width, -3 dB (°) 89 93 90

Vertical beam width, -3 dB (°) 4.7 4.4 4.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.5/15.4, 17.7/15.6

TILT: 0-5.5°

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 32 (70.5)

RET 8110.40. 8110.10

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2085x430x250 (6’10”x1’3”x9”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1934x343x100 (6’4”x11”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 22 (48.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 819

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 27.5 (60.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08207 Rev. A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

306

Page 308: Powerwave Product Catalog

Dual Broadband Antennas

POWERWAVE Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

Dual Broadband Antennas Cross Polarized Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 15.2/13.1, 18/15.9 MET 1.4m (4’7”) 7750.1ST.0000.00 308

65 15.2/13.1, 18/15.9 MET 1.4m (4’7”) 7750.00 309

65 15.2/13.1, 18/15.9 MET 1.4m (4’7”) 7750.0S0.0000.00 310

65 15.2/13.1, 18/15.9 MET 1.4m (4’7”) 7750.90 311

65 16.7/14.6, 17.6/15.5 MET 2.0m (6'6") 7752.90 312

65 16.7/14.6, 17.6/15.5 MET 2.0m (6'6") 7752.00 313

65 16.7/14.6, 17.6/15.5 MET 2.0m (6'6") 7752.0S0.0000.00 314

65 17.3/15.2, 17.8/15.7 MET 2.6m (8'6") 7755.00 315

65 17.3/15.2, 17.8/15.7 MET 2.6m (8’6”) 7755.90 316

65 17.3/15.2, 17.8/15.7 MET 2.6m (8’6”) 7755.0S0.0000.00 317

307

Page 309: Powerwave Product Catalog

Dual Broadband Cross Polarized7750.1ST.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.3 0.3 0.3

Front to back ratio (dB) 180°±30° copolar >27 >27 >27 >27 >27

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <2.0 <2.0 <2.0

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 15 20 20 20

Cross polar discrimination (XPD) ±60° (dB) 10 8 7 > 7 > 7

Far field coupling <0.33 <0.48 <0.62 <0.62 <0.62

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 14.6/12.5 15.2/13.1 17.5/15.4 17.7/15.6 18/15.9

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16,15,15@ >18,17,16,16,15,15@ >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@

2,4,6,8,10,12° 2,4,6,8,10,12° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 600

Horizontal beam width, -3 dB (°) 69 67 65 65 62

Vertical beam width, -3 dB (°) 14.9 13.7 6.9 6.6 6.2

Electrical down tilt (°) 8 to 18 4 to 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.2/13.1, 18/15.9

TILT: MET

LENGTH: 1.4m (4’7”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 21.5 (47.3)

RET 8210.40, 8210.10, 8220.40, 8220.10

Package size, HxWxD, mm (ft) 1550x355x255 (5’1”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x125mm (4’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12.1 (27)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 17.6 (39)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08201 Rev. A Updated: 2009-07-28 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

308

Page 310: Powerwave Product Catalog

Rev1.01 / Mar 19 2010 Updated: 2009-07-28

Dual Broadband Cross Polarized7750.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.3 0.3 0.3

Front to back ratio (dB) 180°±30° copolar >27 >27 >27 >27 >27

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <2.0 <2.0 <2.0

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 15 20 20 20

Cross polar discrimination (XPD) ±60° (dB) 10 8 7 > 7 > 7

Far field coupling <0.33 <0.48 <0.62 <0.62 <0.62

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 14.6/12.5 15.2/13.1 17.5/15.4 17.7/15.6 18.0/15.9

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16,15,15@ >18,17,16,16,15,15@ >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@

2,4,6,8,10,12° 2,4,6,8,10,12° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 69 67 65 65 62

Vertical beam width, -3 dB (°) 14.9 13.7 6.9 6.6 6.2

Electrical down tilt (°) 2 - 12 0 - 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.2/13.1, 18/15.9

TILT: 2-12°/0-8°

LENGTH: 1.4m (4’7”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 21.5 (47.3)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, mm (ft) 1550x355x255 (5’1”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x125mm (4’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12.1 (27)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 17.6 (39)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

309

Page 311: Powerwave Product Catalog

D031-08203 Rev. A Updated: 2009-07-28

Dual Broadband Cross Polarized7750.0S0.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.3 0.3 0.3

Front to back ratio (dB) 180°±30° copolar >27 >27 >27 >27 >27

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <2.0 <2.0 <2.0

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 15 20 20 20

Cross polar discrimination (XPD) ±60° (dB) 10 8 7 > 7 > 7

Far field coupling <0.33 <0.48 <0.62 <0.62 <0.62

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 14.6/12.5 15.2/13.1 17.5/15.4 17.7/15.6 18/15.9

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16,15,15@ >18,17,16,16,15,15@ >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@

2,4,6,8,10,12° 2,4,6,8,10,12° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 600

Horizontal beam width, -3 dB (°) 69 67 65 65 62

Vertical beam width, -3 dB (°) 14.9 13.7 6.9 6.6 6.2

Electrical down tilt (°) 2 to 8 0 to 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.2/13.1, 18/15.9

TILT: MET

LENGTH: 1.4m (4’7”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 16 (35.3)

RET 8210.40, 8210.10, 8220.40, 8220.10

Package size, HxWxD, mm (ft) 1550x355x255 (5’1”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x125mm (4’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12.1 (27)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting No brackets

Weight, with brackets, kg (lbs) NA

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

310

Page 312: Powerwave Product Catalog

D031-08201 Rev. A Updated: 2009-07-28

Dual Broadband Cross Polarized7750.90

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.3 0.3 0.3

Front to back ratio (dB) 180°±30° copolar >27 >27 >27 >27 >27

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <2.0 <2.0 <2.0

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 15 20 20 20

Cross polar discrimination (XPD) ±60° (dB) 10 8 7 > 7 > 7

Far field coupling <0.33 <0.48 <0.62 <0.62 <0.62

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 14.6/12.5 15.2/13.1 17.5/15.4 17.7/15.6 18/15.9

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16,15,15@ >18,17,16,16,15,15@ >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@

2,4,6,8,10,12° 2,4,6,8,10,12° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 600

Horizontal beam width, -3 dB (°) 69 67 65 65 62

Vertical beam width, -3 dB (°) 14.9 13.7 6.9 6.6 6.2

Electrical down tilt (°) 2 to 12 0 to 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.2/13.1, 18/15.9

TILT: MET

LENGTH: 1.4m (4’7”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 19.5 (43)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, mm (ft) 1550x355x255 (5’1”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x125mm (4’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12.1 (27)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre mounted fixed tilt brackets

Weight, with brackets, kg (lbs) 15.6 (34.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

311

Page 313: Powerwave Product Catalog

D031-08202 Rev. A Updated: 2009-07-28

Dual Broadband Cross Polarized7752.90

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.4

Front to back ratio (dB) 180°±30° copolar >27 >27 >27 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25 >25 >25

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <2.0 <2.0 <3.0

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 16

Cross polar discrimination (XPD) ±60° (dB) > 12 > 9.5 > 6.2 > 6.5 > 7.5

Far field coupling <0.26 <0.39 <0.5 <0.59 <0.59

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 15.8/13.7 16.7/14.6 17.1/15 17.3/15.2 17.6/15.5

Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >18,18,16,15,14@ >20,19,19,18,17@

2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 63 63 61

Vertical beam width, -3 dB (°) 9.6 8.9 7.1 6.6 6.3

Electrical down tilt (°) 2 to 9 0 to 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5

TILT: MET

LENGTH: 2.0m (6’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x125mm (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19.8 (44)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted fixed tilt bracket

Weight, with brackets, kg (lbs) 16.0 (35)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

312

Page 314: Powerwave Product Catalog

Rev1.01 / Mar 19 2010 Updated: 2010-11-03

Dual Broadband Cross Polarized7752.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.4

Front to back ratio (dB) 180°±30° copolar >27 >27 >27 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25 >25 >25

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <2.0 <2.0 <3

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 16

Cross polar discrimination (XPD) ±60° (dB) > 12 > 9.5 > 6.2 > 6.5 > 7.5

Far field coupling <0.26 <0.39 <0.5 <0.59 <0.59

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 15.8/13.7 16.7/14.6 17.1/15 17.3/15.2 17.6/15.5

Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >18,18,17,16,16@ >20,19,19,18,17@

2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 63 63 61

Vertical beam width, -3 dB (°) 9.6 8.9 7.1 6.6 6.3

Electrical down tilt (°) 2 - 9 0 - 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5

TILT: 2-9°/0-8°

LENGTH: 2.0m (6’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 70 (156)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x125mm (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 16.0 (35)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.8 (44)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

313

Page 315: Powerwave Product Catalog

Dual Broadband Cross Polarized7752.0S0.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.4

Front to back ratio (dB) 180°±30° copolar >27 >27 >27 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25 >25 >25

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <2.0 <2.0 <3.0

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 16

Cross polar discrimination (XPD) ±60° (dB) > 12 > 9.5 > 6.2 > 6.5 > 7.5

Far field coupling <0.26 <0.39 <0.5 <0.59 <0.59

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 15.8/13.7 16.7/14.6 17.1/15 17.3/15.2 17.6/15.5

Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >18,18,16,15,14@ >20,19,19,18,17@

2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 63 63 61

Vertical beam width, -3 dB (°) 9.6 8.9 7.1 6.6 6.3

Electrical down tilt (°) 2 to 9 0 to 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5

TILT: MET

LENGTH: 2.0m (6’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET 8210.40, 8210.10, 8220.40, 8220.10

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x125mm (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 16.0 (35)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting No brackets

Weight, with brackets, kg (lbs) NA

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

D031-08202 Rev. A Updated: 2009-07-28 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

314

Page 316: Powerwave Product Catalog

Rev1.01 / Mar 19 2010 Updated: 2009-07-28

Dual Broadband Cross Polarized7755.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >30 >30 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25 >25 >25

Inter band Isolation (dB) 38

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.5 <1 <3.5

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-150 <-150

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 14 16 16 16

Cross polar discrimination (XPD) ±60° (dB) >11 > 9.5 > 6.3 >7.2 >7.5

Far field coupling <0.3 <0.41 <0.53 <0.58 <0.58

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 16.6/14.5 17.3/15.2 17.3/15.2 17.6/15.5 17.8/15.7

Side lobe suppression, vertical 1st upper (dB) >18,18,17,16,16@ >18,18,17,16,16@ >17,16,15,14,13@ >17,17,16,15,14@ >17,17,16,15,14@

2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 600

Horizontal beam width, -3 dB (°) 71 67 65 65 62

Vertical beam width, -3 dB (°) 7.4 7 6.9 6.4 6.1

Electrical down tilt (°) 2 - 8 0 - 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7

TILT: 2-8°/0-8°

LENGTH: 2.6m (8’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 32.5 (71.6)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, mm (ft) 2800x355x255 (9’2”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x125mm (8’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19.6 (43)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 25.1 (55)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

315

Page 317: Powerwave Product Catalog

D031-08203 Rev. A Updated: 2009-07-28

Dual Broadband Cross Polarized7755.90

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >30 >30 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25 >25 >25

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.5 <1.0 <3.5

First null fill (dB) <-25 <-25 <-25 <-25 <-25

IM3, 2xTx@43dBm (dBc) <-150 <-150

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 14 16 16 16

Cross polar discrimination (XPD) ±60° (dB) >11 >9.5 > 6.3 >7.2 >7.5

Far field coupling <0.3 <0.41 <0.53 <0.58 <0.58

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 16.6/14.5 17.3/15.2 17.3/15.2 17.6/15.5 17.8/15.7

Side lobe suppression, vertical 1st upper (dB) 18,18,17,16,16@ 18,18,17,16,16@ >17,16,15,14,13@ >17,17,16,15,14@ >17,17,16,15,14@

2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 600

Horizontal beam width, -3 dB (°) 71 67 65 65 62

Vertical beam width, -3 dB (°) 7.4 7 6.9 6.4 6.1

Electrical down tilt (°) 2 to 8 0 to 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7

TILT: MET

LENGTH: 2.6m (8’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 30.5 (67.1)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, mm (ft) 2800x355x255 (9’2”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x125mm (8’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19.6 (43)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted fixed tilt bracket

Weight, with brackets, kg (lbs) 23.1 (51)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

316

Page 318: Powerwave Product Catalog

Dual Broadband Cross Polarized7755.0S0.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960

Vertical beam squint (°) 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >30 >30

First null fill (dB) <-25 <-25

Tracking, horizontal plane ±60° (dB) <1.0 <1.5

Isolation between inputs (dB) 30 30

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 300

Cross polar discrimination (XPD) ±60° (dB) >11 > 6.3

Front to back ratio (dB) 180°±30° total power >25 >25

Cross polar discrimination (XPD) 0° (dB) 16 16

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.6/14.5 17.3/15.2

Side lobe suppression, vertical 1st upper (dB) >18,18,17,16,16@ >17,16,15,14,13@

Frequency band (MHz) 824-896 1710-1880

Electrical down tilt (°) 2 to 8

Power handling, average total (W) 600

Vertical beam width, -3 dB (°) 7.4 6.9

VSWR 1.5:1

Horizontal beam width, -3 dB (°) 71 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7

TILT: MET

LENGTH: 2.6m (8’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, mph (m/s) 55 (123)

Lightning protection DC grounded

Shipping weight, lbs (kg) 32.5 (71.6)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, in (mm) 2800x355x255 (9’2”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, in (mm) 2658x280x125mm (8’8”x11”x4”)

Maximum operational wind speed, mph (m/s) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, lbs (kg) 19.6 (43)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 880

Mounting No brackets

Weight, with brackets, lbs (kg) NA

MECHANICAL SPECIFICATIONS*

POWERWAVE Very Low Broadband Antennas

D031-08203 Rev. A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

317

Page 319: Powerwave Product Catalog

Triple Broadband Antennas

POWERWAVE Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

Triple Broadband Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page

65 16.2/14.1, 16.5/14.4, 16.5/14.4 2-9°/0-10°/0-10° 2.0m (6’6”) 5782.00 319

65 14.7/12.6, 14.6/12.5, 14.6/12.5 MET 1.4m (4’7”) 7780.00 320

65 16.2/14.1, 16.5/14.4, 16.5/14.4 MET 2.0m (6’6”) 7782.00 321

65 17.3/15.2, 17.9/15.8, 17.9/15.8 MET 2.6m (8’6”) 7785.00 322

318

Page 320: Powerwave Product Catalog

Rev1.01 / Mar 19 2010 Updated: 2009-08-02

Triple Broadband Cross Polarized5782.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar > 28 > 30 > 27 > 28 > 30

Front to back ratio (dB) 180°±30° total power > 26 > 26 > 25 > 27 > 27

Inter band Isolation (dB) > 34 > 34

Tracking, horizontal plane ±60° (dB) < 1 < 1 < 1.5 < 2 < 4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) < -153 < -153

IM7, 2xTx@43dBm (dBc) - < -160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) > 11 > 9 > 7 > 6 > 6

Far field coupling < 0.27 < 0.47 < 0.52 < 0.66 < 0.66

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Nominal Impedance (Ω) 50 50

VSWR < 1.5:1 < 1.5:1

Isolation between inputs (dB) > 30 > 30 > 30 > 30 > 30

Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14.0 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ > 18, 17, 16, 16@ > 17, 15, 13@ > 17, 15, 14@ > 17, 16, 15@

2,5,7,9 degree 2,5,7,9 degree 0, 6, 10 degree 0, 6, 10 degree 0, 6, 10 degree

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 2 - 9 0 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 2-9°/0-10°/0-10°

LENGTH: 2.0m (6’6”)

POLARIZATION: XXX-pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Ground

Shipping weight, kg (lbs) 28 (61.7)

RET 8210.40, 8210.10, 8230.40, 8230.10

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x125 (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17.9 (39)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 23.4 (48)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

319

Page 321: Powerwave Product Catalog

Rev1.01 / Mar 19 2010 Updated: 2009-07-27

Triple Broadband Cross Polarized7780.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) -153 -

IM7, 2xTx@43dBm (dBc) - -160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) 30 30 30 30 >30

Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12° 2,4,8,12° 0,4,8,12° 0,4,8,12° 0,4,8,12°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12.0

Electrical down tilt (°) 2 - 12 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.8/12.7, 14.8/12.7

TILT: 2-12°/0-12°/0-12°

LENGTH: 1.4m (4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET 8210.40, 8210.10, 8230.40, 8230.10

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x125mm (4’7”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 13.5 (30)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19 (42)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

320

Page 322: Powerwave Product Catalog

Rev1.01 / Mar 19 2010 Updated: 2009-07-27

Triple Broadband Cross Polarized7782.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 -

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,9° 2,5,7,9° 0,6,10° 0,6,10° 0,6,10°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 2 - 9 0 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 2-9°/0-10°/0-10°

LENGTH: 2.0m (6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 67 (150)

Lightning protection DC grounded

Shipping weight, kg (lbs) 28 (61.7)

RET 8210.40, 8210.10, 8230.40, 8230.10

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x125mm (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 17.9 (39)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 23.4 (48)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

321

Page 323: Powerwave Product Catalog

Rev1.01 / Mar 19 2010 Updated: 2009-07-23

Triple Broadband Cross Polarized7785.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <1 <1 <1.1 <1.0 <2.9

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) -153 -

IM7, 2xTx@43dBm (dBc) - -160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) 30 30 >30 30 >30

Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 16.7/14.6 17.3/15.2 17.3/15.2 17.5/15.4 17.9/15.8

Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >17,16,15,14,13@ >17,16,16,15,15@

2,4,6,8° 2,4,6,8° 0,2,4,6,8° 0,2,4,6,8° 0,2,4,6,8°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 66 65 62

Vertical beam width, -3 dB (°) 7.4 6.9 6.7 6.4 6.2

Electrical down tilt (°) 2 - 8 0 - 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8

TILT: 2-8°/0-8°/0-8°

LENGTH: 2.6m (8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 33 (72.7)

RET 8210.40, 8210.10, 8230.40, 8230.10

Package size, HxWxD, mm (ft) 2800x355x255 (9’2”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x125mm (8’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 22.2 (49)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 27.7 (61)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

322

Page 324: Powerwave Product Catalog

The Powerwave single band antenna’s outstanding performance in the field derives from excellent voltage standing wave ratio (VSWR), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at ±45° to provide the independently fading signals needed for achieving top- quality coverage. As a result of thorough, in-depth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.

Single and Dual Band AntennasPower wave

Page 325: Powerwave Product Catalog

Single and Dual Band Antennas

POWERWAVE Single and Dual Band Antennas

Single Band Antennas Cross Polarized PageALX Cross Polarized Antennas, 806-896 MHz 325 X-Urban Cross Polarized Antennas, 824-896/870-960 MHz 327 Vertical Polarized PageOmni Vertical Cross Polarized Antennas, 806-896 MHz 347 Urban Vertical Polarized Antennas, 824-896/870-960 MHz 355 Dual Band Antennas Cross Polarized PageALXC Cross Polarized Antennas, 870-960/1710-1880 MHz 379 DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz 390 Vertical Polarized PageALVC Vertical Polarized Antennas, , 806-896/1850-1990 MHz 394

324

Page 326: Powerwave Product Catalog

Single Band Antennas

POWERWAVE ALX Cross Polarized Antennas, 806-896 MHz

Single Band Antennas Cross Polarized ALX Cross Polarized Antennas, 806-896 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 90 10.5/8.4 FET 0.7m (2'3") 7390.00B 326

325

Page 327: Powerwave Product Catalog

D031-08018 Rev A Updated: 2010-03-31

ALX Cross Polarized7390.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896

Vertical beam squint (°) <2

Front to back ratio (dB) 180°±30° copolar >19

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >17

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >13

Cross polar discrimination (XPD) ±60° (dB)

Polarization Linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 10.5/8.4

Isolation between inputs (dB) 30

Frequency band (MHz) 806-896

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >13

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 90

Vertical beam width, -3 dB (°) 29

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 10.5/8.4

TILT: FET

LENGTH: 0.7m (2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 806-896

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55

Lightning protection DC grounded

Shipping weight, kg (lbs) 6.5 (141)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour

Package size, HxWxD, mm (ft) 850x355x200 (2’9”x1’2”x10”)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 710x280x125 (2’4”x11”x5”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 4Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 189

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 7.7

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.326

Page 328: Powerwave Product Catalog

Single Band Antennas

POWERWAVE X-Urban Cross Polarized Antennas, 824-896/870-960 MHz

Single Band Antennas Cross Polarized X-Urban Cross Polarized Antennas, 824-896/870-960 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 12.5/10.4 FET 0.7m (2'3") 7216.03 328

65 12.5/10.4 FET 0.7m (2'3") 7282.03 329

65 14.5/12.4 FET 1.3m (4'3") 7217.11 330

65 15.5/13.4 FET 1.3m (4'3") 7217.04 331

65 15/12.9 FET 1.3m (4'3") 7217.03 332

65 15/12.9 FET 1.3m (4'3") 7263.01 333

65 15/12.9 FET 1.3m (4'3") 7263.04 334

65 16.5/14.4 FET 1.9m (6'2") 7255.03 335

65 16.5/14.4 FET 1.9m (6'2") 7281.02 336

65 16.5/14.4 FET 1.9m (6'2") 7281.04 337

65 17.5/15.4 FET 2.6m (8'6") 7218.03 338

65 17.5/15.4 FET 2.6m (8'6") 7218.04 339

65 17.5/15.4 FET 2.6m (8'6") 7218.13 340

65 17.5/15.4 FET 2.6m (8'6") 7218.14 341

65 17/14.9 FET 1.9m (6'2") 7255.04 342

65 18/15.9 FET 2.6m (8'6") 7218.05 343

65 18/15.9 FET 2.6m (8'6") 7218.09 344

65 18/15.9 FET 2.6m (8'6") 7218.15 345

65 18/15.9 FET 2.6m (8'6") 7218.19 346

327

Page 329: Powerwave Product Catalog

D031-08069 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7216.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 880-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB)

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 12.5/10.4

Isolation between inputs (dB) >30

Frequency band (MHz) 880-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >10

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 26

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 12.5/10.4

TILT: FET

LENGTH: 0.7m (2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 880-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 7.5 (16.5)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour

Package size, HxWxD, mm (ft) 770x308x121 (2’6”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 660x256x50 (2’2”x10’x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 3.6 (7.9)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 222

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 7.3 (16)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.328

Page 330: Powerwave Product Catalog

D031-08142 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7282.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >22

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >18

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 12.5/10.4

Isolation between inputs (dB) >30

Frequency band (MHz) 824-896

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >9

Power handling, average total (W) 500

Electrical down tilt (°) 4

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 25

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 12.5/10.4

TILT: FET

LENGTH: 0.7m (2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 5 (11)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 750x308x121 (2’6”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 660x256x50 (2’2”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 4 (8.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 222

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 7.7 (16.9)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.329

Page 331: Powerwave Product Catalog

D031-08072 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7217.11

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 880-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >23

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >19

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.5/12.4

Isolation between inputs (dB) >30

Frequency band (MHz) 880-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >14

Power handling, average total (W) 500

Electrical down tilt (°) 9

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 13

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 880-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 10 (22)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 1430x308x121 (4’8”x1’x5”)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (4’4”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 4.8 (10.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 8.5 (18.7)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.330

Page 332: Powerwave Product Catalog

D031-08071 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7217.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 880-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.5/13.4

Isolation between inputs (dB) >30

Frequency band (MHz) 880-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >14

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 13

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 880-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 10 (22)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 1430x308x121 (4’8”x1’x5”)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (4’4”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 4.8 (10.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 8.5 (18.7)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.331

Page 333: Powerwave Product Catalog

D031-08070 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7217.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 880-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15/12.9

Isolation between inputs (dB) >30

Frequency band (MHz) 880-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >14

Power handling, average total (W) 500

Electrical down tilt (°) 7

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 13

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 880-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 10 (22)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 1430x308x121 (4’8”x1’x5”)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (4’4”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 4.8 (10.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 8.5 (18.7)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.332

Page 334: Powerwave Product Catalog

D031-08126 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7263.01

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >22

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15/12.9

Isolation between inputs (dB) >30

Frequency band (MHz) 824-896

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >14

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 13

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 8.5 (19)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 1430x308x121 (56”x12”x5”)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (52”x10.4”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 7.5 (16.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 7.5 (16.5)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.333

Page 335: Powerwave Product Catalog

D031-08127 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7263.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >22

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15/12.9

Isolation between inputs (dB) >30

Frequency band (MHz) 824-896

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >14

Power handling, average total (W) 500

Electrical down tilt (°) 6

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 13

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 8.5 (19)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 1430x308x121 (56”x12”x5”)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (52”x10.4”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 7.5 (16.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 7.5 (16.5)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.334

Page 336: Powerwave Product Catalog

D031-08081 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7255.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 880-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.5/14.4

Isolation between inputs (dB) >30

Frequency band (MHz) 880-960

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >15

Power handling, average total (W) 500

Electrical down tilt (°) 6

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 9

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 880-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 12 (26.5)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2050x308x121 (6’9”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1940x256x50 (6’4”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 10.5 (23.1)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 794

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 14.2 (31.3)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.335

Page 337: Powerwave Product Catalog

D031-08132 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7281.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.5/14.4

Isolation between inputs (dB) >30

Frequency band (MHz) 824-896

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >15

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 9

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 10 (22)

Brackets 7256.00, 7454.00, 2210.10

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2050x308x121 (6’9”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1940x256x50 (6’4”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 9 (19.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 794

Mounting Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs) 14.5 (31.9)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.336

Page 338: Powerwave Product Catalog

D031-08223Rev A Updated: 2010-03-31

X-Urban Cross Polarized7281.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.5/14.4

Isolation between inputs (dB) >30

Frequency band (MHz) 824-896

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >14

Power handling, average total (W) 500

Electrical down tilt (°) 6

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 9

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 10 (22)

Brackets 7256.00, 7454.00, 2210.10

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2050x308x121 (6’9”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1940x256x50 (6’4”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 9 (19.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 794

Mounting Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs) 14.5 (31.9)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.337

Page 339: Powerwave Product Catalog

D031-08073 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7218.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.5

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >17

Power handling, average total (W) 500

Electrical down tilt (°) 6

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.5/15.4

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 20.2 (44.5)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.338

Page 340: Powerwave Product Catalog

D031-08074 Rev A Updated: 2009-07-28

X-Urban Cross Polarized7218.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.5

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >17

Power handling, average total (W) 500

Electrical down tilt (°) 4

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.5/15.4

TILT: FET

LENGTH: 2.6m (8'6")

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8'10"x1'x5')

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8'6"x10"x2")

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 20.2 (44.5)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.339

Page 341: Powerwave Product Catalog

D031-08077 Rev A Updated: 2009-07-28

X-Urban Cross Polarized7218.13

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.5

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >18

Power handling, average total (W) 500

Electrical down tilt (°) 6

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.5/15.4

TILT: FET

LENGTH: 2.6m (8'6")

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7256.00, 7454.00, 2210.10

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8'10"x1'x5')

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8'6"x10"x2")

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 16.8 (37)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs) 22.3 (49.1)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.340

Page 342: Powerwave Product Catalog

D031-08078 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7218.14

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.5

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.5/15.4

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >18

Power handling, average total (W) 500

Electrical down tilt (°) 4

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.5/15.4

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7256.00, 7454.00, 2210.10

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 16.8 (37)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs) 22.3 (49.1)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.341

Page 343: Powerwave Product Catalog

D031-08082 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7255.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 880-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17/14.9

Isolation between inputs (dB) >30

Frequency band (MHz) 880-960

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >17

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 9

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17/14.9

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 880-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 12 (26.5)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2050x308x121 (6’9”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1940x256x50 (6’4”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 10.5 (23.1)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 794

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 14.2 (31.3)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.342

Page 344: Powerwave Product Catalog

PN7218.05 Updated: 2009-07-28

X-Urban Cross Polarized7218.05

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 18/15.9

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >18

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 2.6m (8'6")

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8'10"x1'x5')

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8'6"x10"x2")

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 20.2 (44.5)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.343

Page 345: Powerwave Product Catalog

D031-08076 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7218.09

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 18/15.9

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >18

Power handling, average total (W) 500

Electrical down tilt (°) 2

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 20.2 (44.5)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.344

Page 346: Powerwave Product Catalog

D031-08079 Rev A Updated: 2010-03-31

X-Urban Cross Polarized7218.15

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.3

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 18/15.9

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >18

Power handling, average total (W) 500

Electrical down tilt (°) 0

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7256.00, 7454.00, 2210.10

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5’)

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 16.8 (37)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs) 22.3 (49.1)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.345

Page 347: Powerwave Product Catalog

D031-08080 Rev A Updated: 2009-07-28

X-Urban Cross Polarized7218.19

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Vertical beam squint (°) <0.4

Front to back ratio (dB) 180°±30° copolar >24

First null fill (dB) -

Inter band Isolation (dB) -

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >20

IM3, 2xTx@43dBm (dBc) <-150

Power handling, average per input (W) 250

Far field coupling -

Cross polar discrimination (XPD) 0° (dB) >20

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Linear slanted ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 18/15.9

Isolation between inputs (dB) >30

Frequency band (MHz) 870-960

VSWR <1.3:1

Side lobe suppression, vertical 1st upper (dB) >18

Power handling, average total (W) 500

Electrical down tilt (°) 2

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 2.6m (8'6")

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18 (39.7)

Brackets 7256.00, 7454.00, 2210.10

Radome colour Light Gray

Package size, HxWxD, mm (ft) 2690x308x121 (8'10"x1'x5')

Maximum operational wind speed, m/s (mph) 42

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8'6"x10"x2")

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN female

Weight, without brackets, kg (lbs) 16.8 (37)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs) 22.3 (49.1)

POWERWAVE Single Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.346

Page 348: Powerwave Product Catalog

Single Band Antennas

POWERWAVE Omni Vertical Polarized Antennas, 806-896 MHz

Single Band Antennas Vertical Polarized Omni Vertical Polarized Antennas, 806-896 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 360 11/8.9 FET 3.14m (10'4") 4168.21.33.00 348

360 11/8.9 FET 3.14m (10'4") 4168.21.33.03 349

360 11/8.9 FET 3m (9‘10") 4168.11.33.00 350

360 11/8.9 FET 3m (9‘10") 4168.11.33.02 351

360 11/8.9 FET 3m (9‘10") 4168.11.33.03 352

360 11/8.9 FET 3m (9‘10") 4168.11.33.06 353

360 11/8.9 FET 3m (9‘10") 4168.11.33.52 354

347

Page 349: Powerwave Product Catalog

Omni Vertical Polarized4168.21.33.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Side lobe suppression, vertical 1st upper (dB) 12

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 6.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) -

Power handling, average total (W) 500

Gain (dBi/dBd) 11/8.9

Frequency band (MHz) 824-896

Horizontal beam width, -3 dB (°) 360

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 11/8.9

TILT: FET

LENGTH: 3.14m (10’4”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 360

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 16 (35.2)

Package size, HxWxD, mm (ft) 3300x150x170 (10’10”x6”x7”)

Radome colour Light Gray

Brackets included

Dimensions, HxWxD, mm (ft) 3140x78 (10’4”x3”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 204

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 12.5 (27.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08113 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

348

Page 350: Powerwave Product Catalog

Omni Vertical Polarized4168.21.33.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Side lobe suppression, vertical 1st upper (dB) 12

Electrical down tilt (°) 3

Vertical beam width, -3 dB (°) 6.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) -

Power handling, average total (W) 500

Gain (dBi/dBd) 11/8.9

Frequency band (MHz) 824-896

Horizontal beam width, -3 dB (°) 360

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 11/8.9

TILT: FET

LENGTH: 3.14m (10’4”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 360

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 16 (35.2)

Package size, HxWxD, mm (ft) 3300x150x170 (10’10”x6”x7”)

Radome colour Light Gray

Brackets included

Dimensions, HxWxD, mm (ft) 3140x78 (10’4”x3”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 204

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 12.5 (27.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08114 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

349

Page 351: Powerwave Product Catalog

Omni Vertical Polarized4168.11.33.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) 12

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 6.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) -

Power handling, average total (W) 500

Gain (dBi/dBd) 11/8.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 360

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 11/8.9

TILT: FET

LENGTH: 3m (9‘10”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 360

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 16 (35.2)

Package size, HxWxD, mm (ft) 3300x150x170 (10’10”x6”x7”)

Radome colour Light Gray

Brackets included

Dimensions, HxWxD, mm (ft) 3000x78 (9‘10”x3”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 194

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 12.5 (27.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08105 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

350

Page 352: Powerwave Product Catalog

Omni Vertical Polarized4168.11.33.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) 12

Electrical down tilt (°) 2

Vertical beam width, -3 dB (°) 6.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) -

Power handling, average total (W) 500

Gain (dBi/dBd) 11/8.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 360

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 11/8.9

TILT: FET

LENGTH: 3m (9‘10”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 360

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 16 (35.2)

Package size, HxWxD, mm (ft) 3300x150x170 (10’10”x6”x7”)

Radome colour Light Gray

Brackets included

Dimensions, HxWxD, mm (ft) 3000x78 (9‘10”x3”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 194

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 12.5 (27.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08109 RevA Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

351

Page 353: Powerwave Product Catalog

Omni Vertical Polarized4168.11.33.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) 12

Electrical down tilt (°) 3

Vertical beam width, -3 dB (°) 6.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) -

Power handling, average total (W) 500

Gain (dBi/dBd) 11/8.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 360

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 11/8.9

TILT: FET

LENGTH: 3m (9‘10”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 360

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 16 (35.2)

Package size, HxWxD, mm (ft) 3300x150x170 (10’10”x6”x7”)

Radome colour Light Gray

Brackets included

Dimensions, HxWxD, mm (ft) 3000x78 (9‘10”x3”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 194

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 12.5 (27.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08106 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

352

Page 354: Powerwave Product Catalog

Omni Vertical Polarized4168.11.33.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) 12

Electrical down tilt (°) 6

Vertical beam width, -3 dB (°) 6.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) -

Power handling, average total (W) 500

Gain (dBi/dBd) 11/8.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 360

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 11/8.9

TILT: FET

LENGTH: 3m (9‘10”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 360

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 16 (35.2)

Package size, HxWxD, mm (ft) 3300x150x170 (10’10”x6”x7”)

Radome colour Light Gray

Brackets included

Dimensions, HxWxD, mm (ft) 3000x78 (9‘10”x3”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 194

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 12.5 (27.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08107 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

353

Page 355: Powerwave Product Catalog

Omni Vertical Polarized4168.11.33.52

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) 12

Electrical down tilt (°) 2 uptilt

Vertical beam width, -3 dB (°) 6.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) -

Power handling, average total (W) 500

Gain (dBi/dBd) 11/8.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 360

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 11/8.9

TILT: FET

LENGTH: 3m (9‘10”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 360

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 16 (35.2)

Package size, HxWxD, mm (ft) 3300x150x170 (10’10”x6”x7”)

Radome colour Light Gray

Brackets included

Dimensions, HxWxD, mm (ft) 3000x78 (9‘10”x3”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 194

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 12.5 (27.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08111 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

354

Page 356: Powerwave Product Catalog

Single Band Antennas

POWERWAVE Urban Vertical Polarized Antennas, 824-896/870-960 MHz

Single Band Antennas Vertical Polarized Urban Vertical Polarized Antennas, 824-896/870-960 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 12.5/10.4 FET 0.7m (2'3") 7270.02 356

65 13/10.9 FET 0.7m (2'3") 7225.04 357

65 15.5/13.4 FET 1.3m (4'3") 7226.03 358

65 15.5/13.4 FET 1.3m (4'3") 7226.04 359

65 15.5/13.4 FET 1.3m (4'3") 7271.02 360

65 15/12.9 FET 1.3m (4'3") 7271.03 361

65 17.5/15.4 FET 2.6m (8'6") 7273.03 362

65 17/14.9 FET 1.9m (6'2") 7227.14 363

65 17/14.9 FET 1.9m (6'2") 7227.04 364

65 17/14.9 FET 2m (6'6") 7272.02 365

65 18/15.9 FET 2.6m (8'6") 7228.03 366

65 18/15.9 FET 2.6m (8'6") 7228.04 367

65 18/15.9 FET 2.6m (8'6") 7228.06 368

65 18/15.9 FET 2.6m (8'6") 7228.08 369

65 18/15.9 FET 2.6m (8'6") 7273.02 370

90 12/9.9 FET 0.7m (2'3") 7230.04 371

90 14/11.9 FET 1.3m (4'3") 7231.04 372

90 14/11.9 FET 1.3m (4'3") 7231.06 373

90 15/12.9 FET 1.9m (6'2") 7232.04 374

90 15/12.9 FET 1.9m (6'2") 7232.07 375

90 16.5/14.4 FET 2.6m (8'6") 7233.04 376

90 16.5/14.4 FET 2.6m (8'6") 7233.06 377

90 16.5/14.4 FET 2.6m (8'6") 7233.08 378

355

Page 357: Powerwave Product Catalog

Urban Vertical Polarized7270.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Side lobe suppression, vertical 1st upper (dB) >10

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 28

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >24

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 12.5/10.4

Frequency band (MHz) 824-896

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 300

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 12.5/10.4

TILT: FET

LENGTH: 0.7m (2’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 770x308x121 (2’6”x1’x5”)

Shipping weight, kg (lbs) 8.3 (18.2)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 660x256x50 (2’2”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 4 (8.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 222

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 7.7 (16.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08048 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

356

Page 358: Powerwave Product Catalog

Urban Vertical Polarized7225.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >9

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 26

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >25

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 13/10.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 300

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13/10.9

TILT: FET

LENGTH: 0.7m (2’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature -40°C to +60°C

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 770x308x121 (2’6”x1’x5”)

Shipping weight, kg (lbs) 6 (13.2)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 660x256x50 (2’2”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 5 (11)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 222

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 8.7 (19.1)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08054 Rev A Updated: 2010-04-27© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

357

Page 359: Powerwave Product Catalog

Urban Vertical Polarized7226.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 6

Vertical beam width, -3 dB (°) 14

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >25

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 15.5/13.4

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 1430x308x121 (4’8”x1’x5”)

Shipping weight, kg (lbs) 8.5 (18)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (4’4”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 7 (15.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 10.7 (23.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08055 Rev A Updated: 2010-04-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

358

Page 360: Powerwave Product Catalog

Urban Vertical Polarized7226.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 14

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >23

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 15.5/13.4

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 8.5 (18)

Package size, HxWxD, mm (ft) 1430x308x121 (4’8”x1’x5”)

Radome colour Light Gray

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Dimensions, HxWxD, mm (ft) 1320x256x50 (4’4”x10”x2”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted standard bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Weight, without brackets, kg (lbs) 7 (15.4)

Weight, with brackets, kg (lbs) 10.7 (23.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08056 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

359

Page 361: Powerwave Product Catalog

Urban Vertical Polarized7271.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 14

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >24

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 15.5/13.4

Frequency band (MHz) 824-896

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 1430x308x121 (4’8”x1’x5“)

Shipping weight, kg (lbs) 8.5 (18.7)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (4’4”x10”x2“ )

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 7 (15.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 10.7 (23.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08049 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

360

Page 362: Powerwave Product Catalog

Urban Vertical Polarized7271.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Side lobe suppression, vertical 1st upper (dB) >15

Electrical down tilt (°) 5

Vertical beam width, -3 dB (°) 14

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >24

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 15/12.9

Frequency band (MHz) 824-896

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.4:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 1430x308x121 (4’8”x1’x5“)

Shipping weight, kg (lbs) 8.5 (18.7)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x256x50 (4’4”x10”x2“ )

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 7 (15.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 493

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 10.7 (23.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08050 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

361

Page 363: Powerwave Product Catalog

Urban Vertical Polarized7273.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 4

Vertical beam width, -3 dB (°) 7

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >22

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 17.5/15.4

Frequency band (MHz) 824-896

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.5/15.4

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 824-896

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2650x308x121 (8’8”x1’x5”)

Shipping weight, kg (lbs) 18.8 (41.4)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 17.7 (39)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08128 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

362

Page 364: Powerwave Product Catalog

Urban Vertical Polarized7227.14

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 9

First null fill (dB) >-13

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >23

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 17/14.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17/14.9

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Connector 1 x 7/16 DIM female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 13 (29)

Package size, HxWxD, mm (ft) 2050x308x121 (6’9”x1’x5”)

Radome colour Light Gray

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Dimensions, HxWxD, mm (ft) 1940x256x50 (6’4”x10”x2”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted standard bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1199

Weight, without brackets, kg (lbs) 10.4 (22.9)

Weight, with brackets, kg (lbs) 14.1 (31)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

363

Page 365: Powerwave Product Catalog

Urban Vertical Polarized7227.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 9

First null fill (dB) >-13

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >23

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 17/14.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17/14.9

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 13 (29)

Package size, HxWxD, mm (ft) 2050x308x121 (6’9”x1’x5”)

Radome colour Light Gray

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Dimensions, HxWxD, mm (ft) 1940x256x50 (6’4”x10”x2”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted standard bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 794

Weight, without brackets, kg (lbs) 10.4 (22.9)

Weight, with brackets, kg (lbs) 14.1 (31)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08057 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

364

Page 366: Powerwave Product Catalog

Urban Vertical Polarized7272.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz)

Side lobe suppression, vertical 1st upper (dB)

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 9.5

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) >-20

Power handling, average total (W) 500

Gain (dBi/dBd) 17/14.9

Frequency band (MHz)

Horizontal beam width, -3 dB (°) 65

VSWR <1.4:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17/14.9

TILT: FET

LENGTH: 2m (6’6”)

POLARIZATION: V-Pol

HORIZONTAL BEAM WIDTH (°): 65

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 14.8 (32.6)

Package size, HxWxD, mm (ft) 2050x308x121 (4’8”x1’x5“)

Radome colour Light Gray

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Dimensions, HxWxD, mm (ft) 1940x256x50 (6’4”x10”x2”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted standard bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 794

Weight, without brackets, kg (lbs) 11 (24.2)

Weight, with brackets, kg (lbs) 14.7 (32.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08051 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

365

Page 367: Powerwave Product Catalog

Urban Vertical Polarized7228.03

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >19

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 6.5

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >23

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 18.0/15.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.0/15.9

TILT: 0°

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5”)

Shipping weight, kg (lbs) 17.0 (37.9)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x N-female

Weight, without brackets, kg (lbs) 10.3 (22.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082/139/1091

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 16.5 (36.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

Updated: 2010-08-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

366

Page 368: Powerwave Product Catalog

Urban Vertical Polarized7228.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >19

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 6.5

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >23

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 18.0/15.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.0/15.9

TILT: 0°

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5”)

Shipping weight, kg (lbs) 17.0 (37.9)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 10.3 (22.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082/139/1091

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 16.5 (36.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

Updated: 2010-08-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

367

Page 369: Powerwave Product Catalog

Urban Vertical Polarized7228.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 6

Vertical beam width, -3 dB (°) 6.5

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >25

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 18/15.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5”)

Shipping weight, kg (lbs) 17 (379)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 10.3 (22.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082/139/1091

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 16.5 (36.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08059 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

368

Page 370: Powerwave Product Catalog

Urban Vertical Polarized7228.08

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 2

Vertical beam width, -3 dB (°) 6.5

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >25

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 18/15.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 65

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 65

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2690x308x121 (8’10”x1’x5”)

Shipping weight, kg (lbs) 17 (379)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 10.3 (22.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082/139/1091

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 16.5 (36.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08060 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

369

Page 371: Powerwave Product Catalog

Urban Vertical Polarized7273.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz)

Side lobe suppression, vertical 1st upper (dB)

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 7

IM3, 2xTx@43dBm (dBc) <-150

Vertical beam squint (°) 0.5

First null fill (dB) >-20

Power handling, average total (W) 500

Gain (dBi/dBd) 18/15.9

Frequency band (MHz)

Horizontal beam width, -3 dB (°) 65

VSWR <1.3:1

Nominal Impedance (Ω) 50

Polarization Linear vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18/15.9

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

HORIZONTAL BEAM WIDTH (°): 65

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 18.8 (41.4)

Package size, HxWxD, mm (ft) 2650x308x121 (8’8”x1’x5”)

Radome colour Light Gray

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Dimensions, HxWxD, mm (ft) 2580x256x50 (8’6”x10”x2”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted standard bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1082

Weight, without brackets, kg (lbs) 14 (30.8)

Weight, with brackets, kg (lbs) 17.7 (39)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08052 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

370

Page 372: Powerwave Product Catalog

Urban Vertical Polarized7230.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >12

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 27

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 12/9.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 300

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 12/9.9

TILT: FET

LENGTH: 0.7m (2’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 805x216x156 (2’8”x9’x6”)

Shipping weight, kg (lbs) 7.5 (16.5)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 695x160x55 (2’3”x6”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 3.3 (7.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 154

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 7 (15.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08061 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

371

Page 373: Powerwave Product Catalog

Urban Vertical Polarized7231.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >15

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 14

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 14/11.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14/11.9

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 1430x216x156 (4’8”x9’x6”)

Shipping weight, kg (lbs) 11 (24.2)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x160x55 (4’4”x6”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08062 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

372

Page 374: Powerwave Product Catalog

Urban Vertical Polarized7231.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 6

Vertical beam width, -3 dB (°) 14

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 14/11.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14/11.9

TILT: FET

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 1430x216x156 (4’8”x9’x6”)

Shipping weight, kg (lbs) 11 (24.2)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x160x55 (4’4”x6”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 6 (13.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 9.7 (21.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08063 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

373

Page 375: Powerwave Product Catalog

Urban Vertical Polarized7232.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >15

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 9

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 15/12.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2050x216x156 (6’9”x9’x6”)

Shipping weight, kg (lbs) 15 (33)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1940x160x55 (6’4”x6”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 10 (22)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 502

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 13.7 (30.2)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08064 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

374

Page 376: Powerwave Product Catalog

Urban Vertical Polarized7232.07

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >15

Electrical down tilt (°) 4

Vertical beam width, -3 dB (°) 9

First null fill (dB) >-15

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 15/12.9

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9

TILT: FET

LENGTH: 1.9m (6’2”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 15 (33)

Package size, HxWxD, mm (ft) 2050x216x156 (6’9”x9’x6”)

Radome colour Light Gray

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Dimensions, HxWxD, mm (ft) 1940x160x55 (6’4”x6”x2”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted standard bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 502

Weight, without brackets, kg (lbs) 10 (22)

Weight, with brackets, kg (lbs) 13.7 (30.2)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08065 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

375

Page 377: Powerwave Product Catalog

Urban Vertical Polarized7233.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 0

Vertical beam width, -3 dB (°) 6.5

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 16.5/14.4

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Connector 1 x 7/16 DIN female

Operating Temperature

Lightning protection DC grounded

Survival wind speed, m/s (mph) 55

Radome material PVC

Shipping weight, kg (lbs) 15 (33)

Package size, HxWxD, mm (ft) 2690x216x156 (8’10”x9’x6”)

Radome colour Light Gray

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Dimensions, HxWxD, mm (ft) 2580x160x55 (8’6”x6”x2”)

Connector position Bottom

Maximum operational wind speed, m/s (mph) 42

Mounting Pre-mounted standard bracket

Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 680

Weight, without brackets, kg (lbs) 8.3 (18.2)

Weight, with brackets, kg (lbs) 13.8 (30.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08066 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

376

Page 378: Powerwave Product Catalog

Urban Vertical Polarized7233.06

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 6

Vertical beam width, -3 dB (°) 6.5

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 16.5/14.4

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2690x216x156 (8’10”x9’x6”)

Shipping weight, kg (lbs) 15 (33)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x160x55 (8’6”x6”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 8.3 (18.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 680

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 13.8 (30.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-08067 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

377

Page 379: Powerwave Product Catalog

Urban Vertical Polarized7233.08

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960

Side lobe suppression, vertical 1st upper (dB) >17

Electrical down tilt (°) 2

Vertical beam width, -3 dB (°) 6.5

First null fill (dB) >-20

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar >20

Vertical beam squint (°) 0.5

Gain (dBi/dBd) 16.5/14.4

Frequency band (MHz) 870-960

Horizontal beam width, -3 dB (°) 90

Polarization Linear vertical

Power handling, average total (W) 500

VSWR <1.3:1

Nominal Impedance (Ω) 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4

TILT: FET

LENGTH: 2.6m (8’6”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 870-960

HORIZONTAL BEAM WIDTH (°): 90

Lightning protection DC grounded

Operating Temperature

Brackets 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Survival wind speed, m/s (mph) 55

Package size, HxWxD, mm (ft) 2690x216x156 (8’10”x9’x6”)

Shipping weight, kg (lbs) 15 (33)

Radome material PVC

Radome colour Light Gray

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2580x160x55 (8’6”x6”x2”)

Maximum operational wind speed, m/s (mph) 42

Connector 1 x 7/16 DIN female

Weight, without brackets, kg (lbs) 8.3 (18.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 680

Mounting Pre-mounted standard bracket

Weight, with brackets, kg (lbs) 13.8 (30.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Single Band Antennas

D031-8068 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

378

Page 380: Powerwave Product Catalog

Dual Band Antennas

POWERWAVE ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz

Dual Band Antennas Cross Polarized ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 15.5/13.4, 15.0/12.9 FET 1.5m (4'11") 7329.00B 380

65 15.5/13.4, 15.0/12.9 FET 1.5m (4'11") 7329.06B 381

65 15.5/13.4, 17.5/15.4 FET 1.5m (4'11") 7330.00B 382

65 15.5/13.4, 17.5/15.4 FET 1.5m (4'11") 7330.02B 383

65 15.5/13.4, 17.5/15.4 FET 1.5m (4'11") 7330.04B 384

65 15.5/13.4, 17.5/15.4 FET 1.5m (4'11") 7330.06B 385

65 16.5/14.4, 16.0/13.9 FET 2.0m (6'6") 7331.00B 386

65 16.5/14.4, 16.0/13.9 FET 2.0m (6'6") 7331.02B 387

65 16.5/14.4, 16.0/13.9 FET 2.0m (6'6") 7331.04B 388

65 16.5/14.4, 16.0/13.9 FET 2.0m (6'6") 7331.06B 389

379

Page 381: Powerwave Product Catalog

ALXC Cross Polarized7329.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >26 >26

First null fill (dB) >-20 >-20

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >12 >12

Front to back ratio (dB) 180°±30° total power >26 >26

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.5/13.4 15/12.9

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 0 0

Side lobe suppression, vertical 1st upper (dB) >13 >15

Vertical beam width, -3 dB (°) 13 13

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 65 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9

TILT: FET

LENGTH: 1.5m (4’11”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.3 (13.7)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 1620x355x255 (5’4”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1450x280x125 (4’9”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 7.1 (15.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 430

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 12.6 (27.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08143 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

380

Page 382: Powerwave Product Catalog

ALXC Cross Polarized7329.06B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >26 >26

First null fill (dB) >-20 >-20

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >11 >9

Front to back ratio (dB) 180°±30° total power >26 >26

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.5/13.4 14.5/12.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 6 6

Side lobe suppression, vertical 1st upper (dB) >8 >13

Vertical beam width, -3 dB (°) 13 13

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 65 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9

TILT: FET

LENGTH: 1.5m (4’11”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.3 (13.7)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 1620x355x255 (5’4”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1450x280x125 (4’9”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 7.1 (15.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 430

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 12.6 (27.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031- Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

381

Page 383: Powerwave Product Catalog

ALXC Cross Polarized7330.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >26 >26

First null fill (dB) >-20 >-20

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >12 >13

Front to back ratio (dB) 180°±30° total power >26 >26

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.5/13.4 17.5/15.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 0 0

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 13.4 7

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 66

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4

TILT: FET

LENGTH: 1.5m (4’11”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.3 (13.7)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 1620x355x255 (5’4”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1450x280x125 (4’9”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 7.1 (15.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 430

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 12.6 (27.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08144 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

382

Page 384: Powerwave Product Catalog

ALXC Cross Polarized7330.02B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >26 >26

First null fill (dB) >-20 >-20

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >12 >13

Front to back ratio (dB) 180°±30° total power >26 >26

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.5/13.4 17.5/15.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 2 2

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 13.4 7

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 66

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4

TILT: FET

LENGTH: 1.5m (4’11”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.3 (13.7)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 1620x355x255 (5’4”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1450x280x125 (4’9”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 7.1 (15.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 430

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 12.6 (27.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08145 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

383

Page 385: Powerwave Product Catalog

ALXC Cross Polarized7330.04B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >26 >26

First null fill (dB) >-20 >-20

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >12 >13

Front to back ratio (dB) 180°±30° total power >26 >26

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.5/13.4 17.5/15.4

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 4 4

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 13.4 7

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 66

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4

TILT: FET

LENGTH: 1.5m (4’11”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.3 (13.7)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 1620x355x255 (5’4”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1450x280x125 (4’9”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 7.1 (15.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 430

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 12.6 (27.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08146 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

384

Page 386: Powerwave Product Catalog

ALXC Cross Polarized7330.06B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >26 >26

First null fill (dB) >-20 >-20

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Front to back ratio (dB) 180°±30° total power >26 >26

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15.6/13.5 17.3/15.2

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 6 6

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 13 7

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 66

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4

TILT: FET

LENGTH: 1.5m (4’11”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.3 (13.7)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 1620x355x255 (5’4”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1450x280x125 (4’9”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 7.1 (15.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 430

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 12.6 (27.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08147 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

385

Page 387: Powerwave Product Catalog

ALXC Cross Polarized7331.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >25 >25

First null fill (dB) >-22 >-22

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Front to back ratio (dB) 180°±30° total power >25 >25

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.6/14.5 16.1/14

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 0 0

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 9 9

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9

TILT: FET

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18.3 (40.3)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 2160x355x255 (7’1”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1990x280x125 (6’6”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.8 (21.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 636

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 15.3 (33.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08148 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

386

Page 388: Powerwave Product Catalog

ALXC Cross Polarized7331.02B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >25 >25

First null fill (dB) >-22 >-22

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Front to back ratio (dB) 180°±30° total power >25 >25

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.6/14.5 15.6/13.5

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 2 2

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 9 9

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9

TILT: FET

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18.3 (40.3)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 2160x355x255 (7’1”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1990x280x125 (6’6”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.8 (21.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 636

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 15.3 (33.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08149 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

387

Page 389: Powerwave Product Catalog

ALXC Cross Polarized7331.04B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >25 >25

First null fill (dB) >-22 >-22

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Front to back ratio (dB) 180°±30° total power >25 >25

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.6/14.5 15.4/13.3

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 4 4

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 9 9

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9

TILT: FET

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18.3 (40.3)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 2160x355x255 (7’1”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1990x280x125 (6’6”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.8 (21.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 636

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 15.3 (33.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08150 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

388

Page 390: Powerwave Product Catalog

ALXC Cross Polarized7331.06B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 870-960 1710-1880

Vertical beam squint (°) <0.5 <0.5

Front to back ratio (dB) 180°±30° copolar >25 >25

First null fill (dB) >-22 >-22

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0

IM3, 2xTx@43dBm (dBc) >-150 >-150

Power handling, average per input (W) 300 300

Cross polar discrimination (XPD) ±60° (dB) >11 >11

Front to back ratio (dB) 180°±30° total power >25 >25

Cross polar discrimination (XPD) 0° (dB) >13 >13

Power handling, average total (W) 600 600

Polarization Dual linear slanted

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.6/14.5 16.1/14

Isolation between inputs (dB) >30 >30

Frequency band (MHz) 870-960 1710-1880

Electrical down tilt (°) 6 6

Side lobe suppression, vertical 1st upper (dB) >16 >16

Vertical beam width, -3 dB (°) 9 9

VSWR <1.5:1 <1.5:1

Horizontal beam width, -3 dB (°) 67 64

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9

TILT: FET

LENGTH: 2.0m (6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 870-960, 1710-1880

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 18.3 (40.3)

RET -

Radome colour Light gray

Package size, HxWxD, mm (ft) 2160x355x255 (7’1”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1990x280x125 (6’6”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.8 (21.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 636

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 15.3 (33.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

D031-08151 Rev A Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

389

Page 391: Powerwave Product Catalog

Dual Band Antennas

POWERWAVE DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz

Dual Band Antennas Cross Polarized DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 90 13.5/11.4, 15.5/13.4 MET 1.4m (4’7”) 7770.00A 391

90 15/12.9, 16/13.9 MET 2.0m (6’6”) 7772.00A 392

90 16/13.9, 16/13.9 MET 2.0m (6’6”) 7775.00A 393

390

Page 392: Powerwave Product Catalog

DBB90 Broadband Cross Polarized7770.00A

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visithttp://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896 1710-2170

Front to back ratio (dB) 180°±30° copolar >25 >25 >25 >25

Front to back ratio (dB) 180°±30° total power >22 >21 >21 >21

Vertical beam squint (°) <1.0 <0.5 <0.5 <0.5

Tracking, horizontal plane ±60° (dB) <2 <2 <2 <2

First null fill (dB) - - - -

Cross polar discrimination (XPD) 0° (dB) - - - -

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 500 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >10 >10 >10 >10

Far field coupling - - - -

Power handling, average total (W) 800 500

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

Gain (dBi/dBd) 13.5/11.4 15.5/13.4 15.5/13.4 15.5/13.4

Inter band Isolation (dB) >36 >36

Frequency band (MHz) 824-896 1710-1880 1850-1990 1900-2170

VSWR <1.5:1 <1.5:1

Side lobe suppression, vertical 1st upper (dB) >18 >18 >18 >18

Isolation between inputs (dB) >30 >30 >30 >25

Electrical down tilt (°) 0 to 10 0 to 8

Horizontal beam width, -3 dB (°) 85 90 90 90

Vertical beam width, -3 dB (°) 15 7 7 7

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.5/11.4, 15.5/13.4

TILT: MET

LENGTH: 1.4m (4’7”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-896, 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 21.5 (47.4)

RET 8220.10, 8220.40, 8210.10, 8210.40

Package size, HxWxD, mm (ft) 1550x355x255 (61”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x125mm

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12.1 (27)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 17.6 (39)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

391

Page 393: Powerwave Product Catalog

DBB90 Broadband Cross Polarized7772.00A

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visithttp://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896 1710-2170

Front to back ratio (dB) 180°±30° copolar >25 >25 >25 >25

Front to back ratio (dB) 180°±30° total power >22 >21 >21 >21

Vertical beam squint (°) <1.0 <0.5 <0.5 <0.5

Tracking, horizontal plane ±60° (dB) <1 <2 <2 <2

First null fill (dB) - - - -

Cross polar discrimination (XPD) 0° (dB) - - - -

IM7, 2xTx@43dBm (dBc) - -

Power handling, average per input (W) 400 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >10 >9 >9 >9

Far field coupling - - - -

Power handling, average total (W) 800 500

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

Gain (dBi/dBd) 15/12.9 16/13.9 16/13.9 16/13.9

Inter band Isolation (dB) >38 >38

Frequency band (MHz) 824-896 1710-1880 1850-1990 1900-2170

VSWR <1.5:1 <1.5:1

Side lobe suppression, vertical 1st upper (dB) >17 >15 >15 >15

Isolation between inputs (dB) >30 >30 >30 >25

Electrical down tilt (°) 0 to 7 0 to 8

Horizontal beam width, -3 dB (°) 85 90 90 90

Vertical beam width, -3 dB (°) 9.5 6.5 6.5 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9, 16/13.9

TILT: MET

LENGTH: 2.0m (6’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-896, 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET 8220.10, 8220.40, 8210.10, 8210.40

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x125mm

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 16.0 (35)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.8 (44)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

392

Page 394: Powerwave Product Catalog

DBB90 Broadband Cross Polarized7775.00A

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visithttp://www.powerwave.com/rpa/.

Frequency range (MHz) 824-896 1710-2170

Front to back ratio (dB) 180°±30° copolar >25 >25 >25 >25

Front to back ratio (dB) 180°±30° total power >23 >21 >21 >21

Vertical beam squint (°) <0.5 <0.5 <0.5 <0.5

Tracking, horizontal plane ±60° (dB) <1 <2 <2 <2

First null fill (dB) - - - -

Cross polar discrimination (XPD) 0° (dB) - - - -

IM7, 2xTx@43dBm (dBc) - -

Power handling, average per input (W) 400 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >12 >9 >9 >9

Far field coupling - - - -

Power handling, average total (W) 800 500

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

Gain (dBi/dBd) 16/13.9 16/13.9 16/13.9 16/13.9

Inter band Isolation (dB) >36 >36

Frequency band (MHz) 824-896 1710-1880 1850-1990 1900-2170

VSWR <1.5:1 <1.5:1

Side lobe suppression, vertical 1st upper (dB) >16 >16 >16 >16

Isolation between inputs (dB) >30 >30 >30 >25

Electrical down tilt (°) 0 to 6 0 to 8

Horizontal beam width, -3 dB (°) 85 90 90 90

Vertical beam width, -3 dB (°) 7 6.5 6.5 6.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16/13.9, 16/13.9

TILT: MET

LENGTH: 2.6m (8’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-896, 1710-2170

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 32.5 (71.6)

RET 8220.10, 8220.40, 8210.10, 8210.40

Package size, HxWxD, mm (ft) 2800x355x255 (9’2”x1’2”x10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x125mm

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19.6 (43)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 25.1 (55)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

Updated: 2009-07-28© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

393

Page 395: Powerwave Product Catalog

Dual Band Antennas

POWERWAVE ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz

Dual Band Antennas Vertical Polarized ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 14.5/12.4, 17.5/15.4 MET 1.3m (4'3") 7840.00 395

70 14.5/12.4, 17.5/15.4 FET 1.4m (4'7") 7333.02B 396

70 14.5/12.4, 17.5/15.4 FET 1.4m (4'7") 7333.00B 397

70 14.5/12.4, 17.5/15.4 FET 1.4m (4'7") 7333.06B 398

80 14.0/11.9, 17.0/14.9 FET 1.4m (4'7") 7332.02B 399

80 14.0/11.9, 17.0/14.9 FET 1.4m (4'7") 7332.06B 400

90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7334.02B 401

90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7332.00B 402

90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7334.00B 403

90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7334.06B 404

90 14.0/11.9, 17.0/14.9 FET 1.3m (4'3") 7850.00B 405

394

Page 396: Powerwave Product Catalog

ALVC Vertical Polarized7840.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >15 >15

Electrical down tilt (°) 0-12 0-8

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -18

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >25 >25

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 14/11.9 17.5/15.4

Frequency band (MHz) 824-896 1850-1990

Horizontal beam width, -3 dB (°) 73 68

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 400 200

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4

TILT: MET

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.8 (34.8)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1495x355x255 (4’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1331x280x125 (4’4”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12 (26.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 388

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 17.5 (38.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031- Updated: 2010-03-31

395

Page 397: Powerwave Product Catalog

ALVC Vertical Polarized7333.02B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16

Electrical down tilt (°) 2 2

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >28 >28

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 14.8/12.7 17.6/15.5

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 72 71

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 175

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 70

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08154 Rev. A Updated: 2010-03-31

396

Page 398: Powerwave Product Catalog

ALVC Vertical Polarized7333.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16 >16

Electrical down tilt (°) 0 0

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >28 >28

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 14.8/12.7 17.6/15.5

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 72 70

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 175

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 70

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08154 Rev A Updated: 2010-03-31

397

Page 399: Powerwave Product Catalog

ALVC Vertical Polarized7333.06B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16

Electrical down tilt (°) 6 6

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >28 >28

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 14.8/12.7 17.6/15.5

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 72 71

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 175

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 70

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08155 Rev A Updated: 2010-03-31

398

Page 400: Powerwave Product Catalog

ALVC Vertical Polarized7332.02B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16 >16

Electrical down tilt (°) 2 2

Vertical beam width, -3 dB (°) 15.5 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >27 >27

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 14/11.9 17.2/15.1

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 81 79

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 350

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 80

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08152 Rev. A Updated: 2010-03-31

399

Page 401: Powerwave Product Catalog

ALVC Vertical Polarized7332.06B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16 >16

Electrical down tilt (°) 6 6

Vertical beam width, -3 dB (°) 15.5 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >27 >27

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 14/11.9 17.2/15.1

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 81 79

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 350

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 80

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08153 Rev A Updated: 2010-03-31

400

Page 402: Powerwave Product Catalog

ALVC Vertical Polarized7334.02B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16

Electrical down tilt (°) 2 2

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >26 >26

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 13.5/11.4 16.5/14.4

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 89 91

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 175

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08156 Rev. A Updated: 2010-03-31

401

Page 403: Powerwave Product Catalog

ALVC Vertical Polarized7332.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16 >16

Electrical down tilt (°) 2 2

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >26 >26

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 13.5/12.4 17.6/15.516.5/14.4

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 89 91

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 175

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08152 Rev A Updated: 2010-03-31

402

Page 404: Powerwave Product Catalog

ALVC Vertical Polarized7334.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16 >16

Electrical down tilt (°) 0 0

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >26 >26

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 14/11.9 16.5/14.4

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 89 91

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 175

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08156 Rev A Updated: 2010-03-31

403

Page 405: Powerwave Product Catalog

ALVC Vertical Polarized7334.06B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16

Electrical down tilt (°) 6 6

Vertical beam width, -3 dB (°) 15 7

First null fill (dB) - -17

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >26 >26

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 13.5/11.4 16.5/14.4

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 89 91

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 350 175

VSWR <1.4:1 <1.4:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4

TILT: FET

LENGTH: 1.4m (4’7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 13.9 (30.6)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1520x355x200 (5’x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1350x280x125 (4’5”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 1 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 9.4 (20.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 394

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 14.9 (32.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08157 Rev A Updated: 2010-03-31

404

Page 406: Powerwave Product Catalog

ALVC Vertical Polarized7850.00B

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 806-896 1850-1990

Side lobe suppression, vertical 1st upper (dB) >18 >18

Electrical down tilt (°) 0-12 0-8

Vertical beam width, -3 dB (°) 15 6.5

First null fill (dB) - -18

IM3, 2xTx@43dBm (dBc) <-150 <-150

Front to back ratio (dB) 180°±30° copolar >26 >26

Vertical beam squint (°) <0.5 <0.5

Gain (dBi/dBd) 13.8/11.7 16/13.9

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 90 90

Polarization Vertical linear Vertical linear

Power handling, average per input (W) 400 200

VSWR <1.5:1 <1.5:1

Nominal Impedance (Ω) 50 50

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9

TILT: 0-12°/0-8°

LENGTH: 1.3m (4’3”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 806-896, 1850-1990

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature

Radome material GRP

Survival wind speed, m/s (mph) 55 (198)

Lightning protection DC grounded

Shipping weight, kg (lbs) 15.8 (34.8)

RET -

Radome colour Light gray RAL 7035 on all visible plastic parts

Package size, HxWxD, mm (ft) 1495x355x255 (4’11”x1’2”x10”)

Brackets 7256.00, 7454.00, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1331x280x125 (4’4”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12 (26.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 388

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 17.5 (38.5)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08181 Rev A Updated: 2010-04-09

405

Page 407: Powerwave Product Catalog

The iRET antenna family is the next iteration of Powerwave’s innovative antenna product line, which integrates remote electrical tilt functionality under the antenna radome, delivering maximized functionality and improved aesthetics, while eliminating installation and reliability issues that can occur with typical exterior RET modules.

iRET AntennasPower wave

Page 408: Powerwave Product Catalog

iRET Antennas

POWERWAVE iRET Antennas

PageLow Broadband Cross Polarized iRET Antennas, 698-894MHz 408 Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz 415 Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 422 High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 448 High Broadband Cross Polarized iRET Antennas, 2300-2700MHz 452 Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 455 Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz 458 Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz 460

407

Page 409: Powerwave Product Catalog

iRET Antennas

POWERWAVE Low Broadband Cross Polarized iRET Antennas, 698-894 MHz

iRET Antennas Cross Polarized Low Broadband Cross Polarized iRET Antennas, 698-894 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 14.7/12.6 0-13° 1.3m(51”) P65-15-XL-R 409

65 15.5/13.4 2-10° 1.8m(72”) P65-16-XL-R 410

65 17.0/14.9 0-6° 2.4m(96”) P65-17-XL-R 411

85 13.7/11.6 2-15° 1.2m(48) P90-14-XL-R 412

90 14.7/12.6 2-11° 1.8m(72”) P90-15-XL-R 413

90 16.1/14.0 0-6° 2.4m(96”) P90-16-XL-R 414

408

Page 410: Powerwave Product Catalog

Very Low Broadband AntennasP65-15-XL-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 25 > 25

Tracking, horizontal plane ±60° (dB) < 2 < 2

Electrical Downtilt Range 0 - 13 0 - 13

Front to back ratio (dB) 180°±30° total power > 22 > 22

IM3, 2xTx@43dBm (dBc) <-153 <-153

Power handling, average per input (W) 500 500

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 8

Power handling, average total (W) 1000 1000

Gain (dBi/dBd) 14.0/11.9 14.7/12.6

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Isolation between inputs (dB) > 30 > 30

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 17.5 15.5

Side lobe suppression, vertical 1st upper (dB) > 16 > 16

VSWR < 1.5:1 < 1.5:1

Horizontal beam width, -3 dB (°) 70 63

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6

TILT: 0-13

LENGTH: 51” (1295mm)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 44 (20)

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, in (mm) 58” x 16” x 10” (1475 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 51” x 12” x 6” (1295 x 305 x 152)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 25 (11)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 920

Mounting Pre-mounted tilt brackets

Weight, with brackets, lbs (kg) 36 (16)

MECHANICAL SPECIFICATIONS*

POWERWAVE Low Broadband Antennas

Updated: 2010-12-03© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

409

Page 411: Powerwave Product Catalog

Very Low Broadband AntennasP65-16-XL-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.8 < 0.8

Front to back ratio (dB) 180°±30° copolar > 30 > 30

First null fill (dB)

Tracking, horizontal plane ±60° (dB) < 2 < 2

Isolation between inputs (dB) > 30 > 30

IM3, 2xTx@43dBm (dBc) <-153

Power handling, average per input (W) 500

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Front to back ratio (dB) 180°±30° total power > 21 > 25

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Polarization Dual Linear +/- 45

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 14.8/12.7 15.5/13.4

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

Frequency band (MHz) 698-806 806-894

Electrical down tilt (°) 2 - 10

Power handling, average total (W) 1000

Vertical beam width, -3 dB (°) 14 12

VSWR < 1.4:1

Horizontal beam width, -3 dB (°) 71 65

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4

TILT: 2 - 10

LENGTH: 72”

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40C to +60C

Radome material PVC IP55

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 66 (30)

RET iRET AISGv1.1, MET and AISGv2.0

Packet size, HxWxD, in (mm) 87” x 16” x 10” (2082 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 72” x 12” x 6” (1829 x 305 x 152)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female IP67

Weight, without brackets, lbs (kg) 44 (20)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 1380

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 55 (25)

MECHANICAL SPECIFICATIONS*

POWERWAVE Low Broadband Antennas

Updated: 2010-12-03© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

410

Page 412: Powerwave Product Catalog

Very Low Broadband AntennasP65-17-XL-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 24 > 21

Tracking, horizontal plane ±60° (dB) < 2 < 2

Electrical Downtilt Range 0 - 6 0 - 6

Front to back ratio (dB) 180°±30° total power > 22 > 22

IM3, 2xTx@43dBm (dBc) <-153 <-153

Power handling, average per input (W) 500 500

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 9 > 6.5

Power handling, average total (W) 1000 1000

Gain (dBi/dBd) 16.5/14.4 17.0/14.9

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Isolation between inputs (dB) > 30 > 30

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 9.5 8

Side lobe suppression, vertical 1st upper (dB) > 15 > 15

VSWR < 1.5:1 < 1.5:1

Horizontal beam width, -3 dB (°) 70 61

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.0/14.9

TILT: 0-6

LENGTH: 96” (2438mm)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40 - +70C

Radome material PVC

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 70 (32)

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, in (mm) 107” x 16” x 10” (2725 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 96” x 12” x 6” (2438 x 305 x 152)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 48 (22)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 1840

Mounting Pre-mounted tilt brackets

Weight, with brackets, lbs (kg) 59 (27)

MECHANICAL SPECIFICATIONS*

POWERWAVE Low Broadband Antennas

Updated: 2010-12-05© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

411

Page 413: Powerwave Product Catalog

Very Low Broadband AntennasP90-14-XL-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 1.25 < 1.25

Front to back ratio (dB) 180°±30° copolar > 25 > 25

Tracking, horizontal plane ±60° (dB) < 2 < 2

Electrical Downtilt Range 2 - 15 2 - 15

Front to back ratio (dB) 180°±30° total power > 22 > 22

IM3, 2xTx@43dBm (dBc) < -153 < -153

Power handling, average per input (W) 500 500

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Power handling, average total (W) 1000 1000

Gain (dBi/dBd) 13.0/10.9 13.7/11.6

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Isolation between inputs (dB) > 30 > 30

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 18 15

Side lobe suppression, vertical 1st upper (dB) >20 >20

VSWR < 1.4:1 < 1.4:1

Horizontal beam width, -3 dB (°) 83 81

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.7/11.6

TILT: 2 - 15

LENGTH: 48”

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 85

Operating Temperature -40C to +60C

Radome material PVC, IP55

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 44 (20)

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, in (mm) 58” x 16” x 10” (1475 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 48” x 12” x 6” (1219 x 305 x 152)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 x 7/16 DIN Female, IP67

Weight, without brackets, lbs (kg) 25 (11)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 920

Mounting Pre-mounted tilt brackets

Weight, with brackets, lbs (kg) 36 (16)

MECHANICAL SPECIFICATIONS*

POWERWAVE Low Broadband Antennas

Updated: 2010-12-05© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

412

Page 414: Powerwave Product Catalog

Very Low Broadband AntennasP90-15-XL-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.8 < 0.8

Front to back ratio (dB) 180°±30° copolar > 17 > 24

First null fill (dB)

Tracking, horizontal plane ±60° (dB) < 2 < 2

Isolation between inputs (dB) > 30 > 30

IM3, 2xTx@43dBm (dBc) < -153

Power handling, average per input (W) 500

Cross polar discrimination (XPD) ±60° (dB) 10 10

Front to back ratio (dB) 180°±30° total power > 22 > 22

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Polarization Dual Linear +/- 45

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 13.8/11.7 14.7/12.6

Side lobe suppression, vertical 1st upper (dB) > 15 > 16

Frequency band (MHz) 698-806 806-894

Electrical down tilt (°) 2-11

Power handling, average total (W) 1000

Vertical beam width, -3 dB (°) 14.9 12.2

VSWR < 1.4:1

Horizontal beam width, -3 dB (°) 90 81

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6

TILT: 2-11

LENGTH: 72”

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 66 (30)

RET iRET AISGv1.1, MET and AISGv2.0

Packet size, HxWxD, in (mm) 87” x 16” x 10” (2082 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 72” x 12” x 6” (1829 x 305 x 186)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 x 7/16 DIN Female

Weight, without brackets, lbs (kg) 44 (20)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 1380

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 55 (25)

MECHANICAL SPECIFICATIONS*

POWERWAVE Low Broadband Antennas

Updated: 2010-12-05© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

413

Page 415: Powerwave Product Catalog

Very Low Broadband AntennasP90-16-XL-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar > 17 > 25

Tracking, horizontal plane ±60° (dB) < 2 < 2

Electrical Downtilt Range 0 - 6 0 - 6

Front to back ratio (dB) 180°±30° total power > 22 > 22

IM3, 2xTx@43dBm (dBc) <-153 <-153

Power handling, average per input (W) 500 500

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) 10 10

Power handling, average total (W) 1000 1000

Gain (dBi/dBd) 15.4/13.3 16.1/14.0

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Isolation between inputs (dB) > 30 > 30

Frequency band (MHz) 698-806 806-894

Nominal Impedance (Ω) 50 50

Vertical beam width, -3 dB (°) 9.7 7.7

Side lobe suppression, vertical 1st upper (dB) > 16 > 16

VSWR < 1.4:1 < 1.4:1

Horizontal beam width, -3 dB (°) 86 81

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.1/14.0

TILT: 0-6

LENGTH: 96” (2438mm)

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40C to +70C

Radome material PVC

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 70 (32)

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, in (mm) 107” x 16” x 10” (2725 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 96” x 12” x 7” (2438 x 305 x 182)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 2 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 48 (22)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 1840

Mounting Pre-mounted tilt brackets

Weight, with brackets, lbs (kg) 59 (27)

MECHANICAL SPECIFICATIONS*

POWERWAVE Low Broadband Antennas

Updated: 2010-12-05© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

414

Page 416: Powerwave Product Catalog

iRET Antennas

POWERWAVE Dual Broadband Cross Polarized iRET 698-894/1710-2170MHz

iRET Antennas Cross Polarized Dual Broadband Cross Polarized iRET Antennas 698-894/1710-2170MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65, 65 14.7/12.6, 17.0/14.9 0-13°/0-9° 1.3m (51”) P65-15-XLH-RR 416

65, 65 15.5/13.4 17.5/15.4 2-10°/0-10° 1.8m (72”) P65-16-XLH-RR 417

65, 65 17.2/15.1 17.5/15.4 0-6°/0-10° 2.4m (96”) P65-17-XLH-RR 418

85, 85 13.7/11.6 15.7/13.6 0-13°/0-8° 1.2m (48”) P90-14-XLH-RR 419

90, 90 14.5/12.4 16.3/14.2 0-11°/0-8° 1.8m (72”) P90-15-XLH-RR 420

90, 90 16.1/14.0 16.3/14.2 0-6°/0-8° 2.4m (96”) P90-16-XLH-RR 421

415

Page 417: Powerwave Product Catalog

Dual Broadband AntennasP65-15-XLH-RR

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894 1710-2170

Vertical beam squint (°) <1.25 < 0.5

Front to back ratio (dB) 180°±30° copolar > 25 > 28

Tracking, horizontal plane ±60° (dB) < 2 < 2

Isolation between inputs (dB) >30 > 30

Inter band Isolation (dB) > 40 > 40

IM3, 2xTx@43dBm (dBc) -153 -153

Power handling, average per input (W) 500 300

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Front to back ratio (dB) 180°±30° total power > 25 > 25

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Nominal Impedance (Ω) 50 50

Gain (dBi/dBd) 14/11.9 14.7/12.6 16.4/14.3 16.7/14.6 17.0/14,9

Side lobe suppression, vertical 1st upper (dB) > 14 >20

Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170

Electrical down tilt (°) 0-13 0-9

Power handling, average total (W) 1000 600

Vertical beam width, -3 dB (°) 17 7.5

VSWR < 1.5:1 < 1.5:1

Horizontal beam width, -3 dB (°) 73 63 65 61 60

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 17.0/14.9

TILT: 0-13, 0-9

LENGTH: 51”

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65, 65

Operating Temperature -40C to +60C

Radome material PVC, IP55

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 52 (24)

RET iRET AISGv1.1, MET and AISGv2.0

Packet size, HxWxD, in (mm) 60” x 16” x 10” (1524 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 51” x 12” x 6” (1295 x 305 x 152)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 4 X 7/16 DIN Female, IP67

Weight, without brackets, lbs (kg) 30 (14)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 920

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 41 (19)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-07-02

416

Page 418: Powerwave Product Catalog

Updated: 2010-10-29

Dual Broadband AntennasP65-16-XLH-RR

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894 1710-2170

Vertical beam squint (°) < 0.8 < 0.8 < 0.5 < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar >24 >24 > 30 >30 >28

Front to back ratio (dB) 180°±30° total power

Inter band Isolation (dB) > 40 > 40

Tracking, horizontal plane ±60° (dB) < 2 < 2 < 2 < 2

First null fill (dB) 20 20 20

IM3, 2xTx@43dBm (dBc) -153 -153

IM7, 2xTx@43dBm (dBc)

Power handling, average per input (W) 500 250

Cross polar discrimination (XPD) 0° (dB) > 15 > 15 > 15 > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10 > 10 > 10 > 10

Far field coupling

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Nominal Impedance (Ω) 50 50

VSWR < 1.5:1 < 1.5:1

Isolation between inputs (dB) > 30 > 30 > 30 > 30

Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 14.8/12.7 15.5/13.4 16.9/14.8 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) > 16 >16 > 16

>16 >16

Power handling, average total (W) 1000 500

Horizontal beam width, -3 dB (°) 66 65 60 63 63

Vertical beam width, -3 dB (°) 14.7 12.5 6.8 6.4 5.7

Electrical down tilt (°) 2 to 10 0 to 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.5/13.4 17.5/15.4

TILT: 2-10, 0-10

LENGTH: 72”

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65, 65

Operating Temperature -40C to +60C

Radome material PVC, IP55

Survival wind speed, m/s (mph) 150 (67)

Lightning protection DC Ground

Shipping weight, kg (lbs) 34 (75)

RET iRET AISGv1.1, MET and AISGv2.0

Packet size, HxWxD, mm (ft) 87” x 16” x 10” (2225 x 400 x 225)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 72” x 12” x 6” (1829 x 305 x 152)

Maximum operational wind speed, m/s (mph) 100 (45)

Connector 4 X 7/16 DIN Female, IP67

Weight, without brackets, kg (lbs) 24 (53)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1380

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs) 29 (64)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

417

Page 419: Powerwave Product Catalog

Dual Broadband AntennasP65-17-XLH-RR

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894 1710-2170

Vertical beam squint (°) < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar 25 > 30

Tracking, horizontal plane ±60° (dB) < 2 < 2

Isolation between inputs (dB) > 30 > 30

Inter band Isolation (dB) > 40

IM3, 2xTx@43dBm (dBc) -153 -153

Power handling, average per input (W) 500 300

Cross polar discrimination (XPD) ±60° (dB) 10 10

Front to back ratio (dB) 180°±30° total power 22 > 25

Cross polar discrimination (XPD) 0° (dB) > 15 > 15

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Nominal Impedance (Ω) 50 50

Gain (dBi/dBd) 16.4/14.3 17.2/15.1 16.9/14.8 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) > 16 > 16

Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170

Electrical down tilt (°) 0 to 6 0 to 10

Power handling, average total (W) 1000 600

Vertical beam width, -3 dB (°) 8.4 6.5

VSWR < 1.5:1 < 1.5:1

Horizontal beam width, -3 dB (°) 70 63 60 63 60

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.2/15.1 17.5/15.4

TILT: 0-6, 0-10

LENGTH: 96”

POLARIZATION: Dual linear ±45°

FREQUENCY (MHz): 698-894, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65, 65

Operating Temperature

Radome material PVC

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 81 (37)

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, in (mm) 107” x 16” x 10” (2725 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 96” x 12” x 6” (2438 x 305 x 152)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 4 X 7/16 DIN Female

Weight, without brackets, lbs (kg) 59 (27)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 1840

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 70 (32)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

Updated: 2010-05-07© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

418

Page 420: Powerwave Product Catalog

Dual Broadband AntennasP90-14-XLH-RR

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894 1710-2170

Vertical beam squint (°) < 1.25 < 0.5

Front to back ratio (dB) 180°±30° copolar > 25 > 25

Tracking, horizontal plane ±60° (dB) < 2 < 2

Isolation between inputs (dB) > 30 > 28

Inter band Isolation (dB) > 40

IM3, 2xTx@43dBm (dBc) -153 -153

Power handling, average per input (W) 500 300

Cross polar discrimination (XPD) ±60° (dB) > 10 > 10

Front to back ratio (dB) 180°±30° total power > 22 > 22

Cross polar discrimination (XPD) 0° (dB) > 10 > 15

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Nominal Impedance (Ω) 50 50

Gain (dBi/dBd) 13.0/10.9 13.7/11.6 15.1/13.0 15.4/13.3 15.7/13.6

Side lobe suppression, vertical 1st upper (dB) > 12 > 16

Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170

Electrical down tilt (°) 0-13 0-8

Power handling, average total (W) 1000 600

Vertical beam width, -3 dB (°) 15.0 7.0

VSWR < 1.5:1 < 1.5:1

Horizontal beam width, -3 dB (°) 86 83 85 84 85

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 13.7/11.6 15.7/13.6

TILT: 0-13, 0-8

LENGTH: 48”

POLARIZATION: Dual Linear ±45°

FREQUENCY (MHz): 698-894, 1710-2170

HORIZONTAL BEAM WIDTH (°): 85,85

Operating Temperature -40C to +60C

Radome material PVC, IP55

Survival wind speed, mph (m/s) 150 (67)

Lightning protection DC Ground

Shipping weight, lbs (kg) 52 (24)

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, in (mm) 60” x 16” x 10” (1524 x 400 x 255)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, in (mm) 48” x 12” x 7.3” (1219 x 305 x 186)

Maximum operational wind speed, mph (m/s) 100 (45)

Connector 4 x 7/16 DIN Female, IP67

Weight, without brackets, lbs (kg) 30 (14)Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N) 920

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, lbs (kg) 41 (19)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-07-02

419

Page 421: Powerwave Product Catalog

Updated: 2010-11-04

Dual Broadband AntennasP90-15-XLH-RR

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894 1710-2170

Vertical beam squint (°) < 0.8 < 0.8 < 0.5 < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar 25 25 > 23 > 27 > 30

Front to back ratio (dB) 180°±30° total power 22 22 > 22 > 22 > 22

Inter band Isolation (dB) > 40 > 40

Tracking, horizontal plane ±60° (dB) < 2 < 2 < 2 < 2 < 2

First null fill (dB)

IM3, 2xTx@43dBm (dBc) -153 -153

IM7, 2xTx@43dBm (dBc)

Power handling, average per input (W) 500 300

Cross polar discrimination (XPD) 0° (dB) > 15 > 15 > 15 > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) 10 10 10 10 10

Far field coupling

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Nominal Impedance (Ω) 50 50

VSWR < 1.5:1 < 1.5:1

Isolation between inputs (dB) > 30 > 30 > 30 > 30 > 30

Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 13.8/11.7 14.5/12.4 15.7/13.6 16.0/13.9 16.3/14.2

Side lobe suppression, vertical 1st upper (dB) > 16 >16 >18 >17 >15

Power handling, average total (W) 1000 600

Horizontal beam width, -3 dB (°) 86 84 88 80 80

Vertical beam width, -3 dB (°) 14 12 7 6.5 6

Electrical down tilt (°) 0 to 11 0 to 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4 16.3/14.2

TILT: 0-11, 0-8

LENGTH: 72”

POLARIZATION: Dual Linear ±45°

FREQUENCY (MHz): 698-894, 1710-2170

HORIZONTAL BEAM WIDTH (°): 90, 90

Operating Temperature -40 to +70C

Radome material PVC

Survival wind speed, m/s (mph) 150 (67)

Lightning protection DC Ground

Shipping weight, kg (lbs) 34 (75)

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, mm (ft) 2225 x 400 x 225 (87” x 16” x 10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1829 x 305 x 186 (72” x 12” x 7.3”)

Maximum operational wind speed, m/s (mph) 100 (45)

Connector 4 x 7/16 DIN Female, Extended Shank

Weight, without brackets, kg (lbs) 24 (53)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1380

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs) 29 (64)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

420

Page 422: Powerwave Product Catalog

Updated: 2010-05-10

Dual Broadband AntennasP90-16-XLH-RR

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 698-894 1710-2170

Vertical beam squint (°) < 0.8 < 0.8 < 0.5 < 0.5 < 0.5

Front to back ratio (dB) 180°±30° copolar 25 25 >21 >24 >27

Front to back ratio (dB) 180°±30° total power 22 22 > 22 > 22 > 22

Inter band Isolation (dB) > 40 > 40

Tracking, horizontal plane ±60° (dB) < 2 < 2 < 2 < 2 < 2

First null fill (dB)

IM3, 2xTx@43dBm (dBc) -153 -153

IM7, 2xTx@43dBm (dBc)

Power handling, average per input (W) 500 300

Cross polar discrimination (XPD) 0° (dB) > 15 > 15 > 15 > 15 > 15

Cross polar discrimination (XPD) ±60° (dB) 10 10 10 10 10

Far field coupling

Polarization Dual Linear +/- 45 Dual Linear +/- 45

Nominal Impedance (Ω) 50 50

VSWR < 1.5:1 < 1.5:1

Isolation between inputs (dB) > 30 > 30 > 30 > 30 > 30

Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 15.4/13.3 16.1/14.0 15.7/13.6 16.0/13.9 16.3/14.2

Side lobe suppression, vertical 1st upper (dB) > 16 >16 >16 >16 >16

Power handling, average total (W) 1000 600

Horizontal beam width, -3 dB (°) 83 84 87 84 83

Vertical beam width, -3 dB (°) 9 8.7 6 6.6 6

Electrical down tilt (°) 0-6 0-8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.1/14.0 16.3/14.2

TILT: 0-6, 0-8

LENGTH: 96”

POLARIZATION: Dual Linear ±45°

FREQUENCY (MHz): 698-894, 1710-2170

HORIZONTAL BEAM WIDTH (°): 90, 90

Operating Temperature -40 to +70C

Radome material PVC

Survival wind speed, m/s (mph) 150 (67)

Lightning protection DC Ground

Shipping weight, kg (lbs) (37) 81

RET iRET AISGv1.1, MET and AISGv2.0 Available

Packet size, HxWxD, mm (ft) 2725 X 400 X 255 (107” X 16” X 10”)

Radome colour Light Grey

Brackets 7256.00, 7454.00, 2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2438 X 305 X 152 (96 X 12 X 6)

Maximum operational wind speed, m/s (mph) 100 (45)

Connector 4 x 7/16 DIN Female, Extended Shank

Weight, without brackets, kg (lbs) 27 (59)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 1849

Mounting Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs) 32 (70)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

421

Page 423: Powerwave Product Catalog

iRET Antennas

POWERWAVE Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page

65 18.3/16.2, 18.3/16.2, 18.3/16.2 0-10°/0-10°/0-10° 1.3m(4’3”) 8763.0ST.0000.00 424

65 18.3/16.2, 18.3/16.2, 18.3/16.2 0-10°/0-10°/0-10° 1.3m(4’3”) 8763.0ST.B100.00 425

65 17.7/15.6, 17.9/15.8, 18.1/16.0 0-10°/0-10°/0-10° 1.3m(4’3”) 8763.0ST.B400.00 426

65 14.7/12.6, 14.6/12.5, 14.6/12.5 0-20°/0-12°/0-12° 1.3m(4’3”) 8780.0ST.0000.00 427

65 14.7/12.6, 14.6/12.5, 14.6/12.5 0-20°/0-12°/0-12° 1.4m(4’7”) 8780.0ST.B100.00 428

65 14.7/12.6, 14.6/12.5, 14.6/12.5 0-20°/0-12°/0-12° 1.4m(4’7”) 8780.0ST.B100.02 429

65 14.7/12.6, 14.6/12.5, 14.6/12.5 0-20°/0-12°/0-12° 1.4m(4’7”) 8780.0ST.B100.04 430

65 14.7/12.6, 14.6/12.5, 14.6/12.5 0-20°/0-12°/0-12° 1.4m(4’7”) 8780.0ST.B400.00 431

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 1.4m(4’7”) 8780.0ST.B400.02 432

65 14.7/12.6, 14.6/12.5, 14.6/12.5 0-20°/0-12°/0-12° 1.4m(4’7”) 8780.0ST.B400.04 433

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 2.0m(6’6”) 8782.0ST.0000.00 434

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 2.0m(6’6”) 8782.0ST.B100.00 435

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 2.0m(6’6”) 8782.0ST.B100.02 436

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 2.0m(6’6”) 8782.0ST.B100.04 437

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 2.0m(6’6”) 8782.0ST.B400.00 438

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 2.0m(6’6”) 8782.0ST.B400.02 439

65 16.2/14.1, 16.5/14.4, 16.5/14.4 0-20°/0-12°/0-12° 2.0m(6’6”) 8782.0ST.B400.04 440

65 17.4/15.3, 17.2/15.1, 17.5/15.4 0-10°/0-10°/0-10° 2.6m(8’6”) 8785.0ST.0000.00 441

65 17.4/15.3, 17.2/15.1, 17.5/15.4 0-10°/0-10°/0-10° 2.6m(8’6”) 8785.0ST.B100.00 442

65 17.4/15.3, 17.2/15.1, 17.5/15.4 0-10°/0-10°/0-10° 2.6m(8’6”) 8785.0ST.B100.02 443

65 17.4/15.3, 17.2/15.1, 17.5/15.4 0-10°/0-10°/0-10° 2.6m(8’6”) 8785.0ST.B100.04 444

65 17.4/15.3, 17.2/15.1, 17.5/15.4 0-10°/0-10°/0-10° 2.6m(8’6”) 8785.0ST.B400.00 445

422

Page 424: Powerwave Product Catalog

iRET Antennas

POWERWAVE Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page

65 17.4/15.3, 17.2/15.1, 17.5/15.4 0-10°/0-10°/0-10° 2.6m(8’6”) 8785.0ST.B400.02 446

65 17.4/15.3, 17.2/15.1, 17.5/15.4 0-10°/0-10°/0-10° 2.6m(8’6”) 8785.0ST.B400.04 447

423

Page 425: Powerwave Product Catalog

i-RET ANTENNA THBB65 1.3m UXCM-1710-2170-65-18i/18i/18i-Ai-D

8763.0ST.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,12 @0,2,4,6,8,10 >18,18,16,16,14,12 @0,2,4,6,8,10 >18,18,16,16,14,12 @0,2,4,6,8,10

Power handling, average total (W) 1500

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2

TILT: 0-10°/0-10°/0-10°

LENGTH: 1.3m(51”)

POLARIZATION: XXX-pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 70 (156)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 33.1 (73)

RET No iRET module attached [8510.40]

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1550 x 610 x 229 (61 x 24 x 9 inch)

Brackets 7456.00A, 2210.10, 7455.00, 7458.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1310 x 524 x 101 (52 x 21 x 4 inch)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female

Weight, without brackets, kg (lbs) 21.6 (47.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 800 / 75 / 884

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 27.1 (60)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

Rev1.02 / Mar 19 2010 Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

424

Page 426: Powerwave Product Catalog

i-RET ANTENNA THBB65 1.3m UXCM-1710-2170-65-18i/18i/18i-Ai-D AISGv1.1

8763.0ST.B100.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,12 @0,2,4,6,8,10 >18,18,16,16,14,12 @0,2,4,6,8,10 >18,18,16,16,14,12 @0,2,4,6,8,10

Power handling, average total (W) 1500

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2

TILT: 0-10°/0-10°/0-10°

LENGTH: 1.3m(51”)

POLARIZATION: XXX-pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 70 (156)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 34.6 (76)

RET AISG1.1 (AISG2.0/Ericsson)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1550 x 610 x 229 (61 x 24 x 9 inch)

Brackets 7456.00A, 2210.10, 7455.00, 7458.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1310 x 524 x 101 (52 x 21 x 4 inch)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 6xAISG [3x i-RET 8510.40]

Weight, without brackets, kg (lbs) 23.1 (51)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 800 / 75 / 884

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 28.6 (63)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

Rev1.02 / Mar 19 2010 Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

425

Page 427: Powerwave Product Catalog

i-RET ANTENNA THBB65 1.3m UXCM-1710-2170-65-18i/18i/18i-Ai-D AISGv2.0

8763.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,12 @0,2,4,6,8,10 >18,18,16,16,14,12 @0,2,4,6,8,10 >18,18,16,16,14,12 @0,2,4,6,8,10

Power handling, average total (W) 1500

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2

TILT: 0-10°/0-10°/0-10°

LENGTH: 1.3m(51”)

POLARIZATION: XXX-pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 70 (156)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 34.6 (76)

RET AISG2.0 (AISG1.1/Ericsson)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1550 x 610 x 229 (61 x 24 x 9 inch)

Brackets 7456.00A, 2210.10, 7455.00, 7458.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1310 x 524 x 101 (52 x 21 x 4 inch)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 6xAISG [3x i-RET 8510.40]

Weight, without brackets, kg (lbs) 23.1 (51)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 800 / 75 / 884

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 28.6 (63)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

Rev1.02 / Mar19 2010 Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

426

Page 428: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 1.4m ALXT-824-960/1710-2170-65-14.7i/15i/15i-Ai-D

8780.0ST.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >38 >38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12

Electrical down tilt (°) 0 - 20 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5

TILT: 0-20°/0-12°/0-12°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 21.5 (47.4)

RET No iRET module attached

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female

Weight, without brackets, kg (lbs) 12 (26.4)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 17.5 (38.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

427

Page 429: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 1.4m ALXT-824-960/1710-2170-65-14.7i/15i/15i-Ai-D

8780.0ST.B100.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >38 >38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12

Electrical down tilt (°) 0 - 20 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5

TILT: 0-20°/0-12°/0-12°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET AISG1.1 (AISG2.0/Ericsson)

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 6x AISG

Weight, without brackets, kg (lbs) 13.5 (30)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19 (42)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

428

Page 430: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 1.4m ALXT-824-960/1710-2170-65-14.7i/15i/15i-Ai-D

8780.0ST.B100.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >38 >38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12

Electrical down tilt (°) 0 - 20 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5

TILT: 0-20°/0-12°/0-12°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 22 (48.5)

RET AISG1.1 (AISG2.0/Ericsson) on WHITE system

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 2x AISG

Weight, without brackets, kg (lbs) 12.5 (27.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18 (39.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

429

Page 431: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 1.4m ALXT-824-960/1710-2170-65-14.7i/15i/15i-Ai-D

8780.0ST.B100.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >38 >38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12

Electrical down tilt (°) 0 - 20 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5

TILT: 0-20°/0-12°/0-12°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 22.5 (49.6)

RET AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 4x AISG

Weight, without brackets, kg (lbs) 13 (28.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18.5 (40.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

430

Page 432: Powerwave Product Catalog

Updated: 2010-06-29

i-RET ANTENNA TBB65 1.4m ALXT-824-960/1710-2170-65-14.7i/15i/15i-Ai-D

8780.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >38 >38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12

Electrical down tilt (°) 0 - 20 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5

TILT: 0-20°/0-12°/0-12°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET AISG2.0 (AISG1.1/Ericsson)

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 6x AISG

Weight, without brackets, kg (lbs) 13.5 (30)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19 (42)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

431

Page 433: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 1.4m ALXT-824-960/1710-2170-65-14.7i/15i/15i-Ai-D

8780.0ST.B400.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >38 >38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12

Electrical down tilt (°) 0 - 20 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5

TILT: 0-20°/0-12°/0-12°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 22 (48.5)

RET AISG2.0 (AISG1.1/Ericsson) on WHITE system

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 2x AISG

Weight, without brackets, kg (lbs) 12.5 (27.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18 (39.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

432

Page 434: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 1.4m ALXT-824-960/1710-2170-65-14.7i/15i/15i-Ai-D

8780.0ST.B400.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >38 >38

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 15 14 16 18 18

Cross polar discrimination (XPD) ±60° (dB) > 9.3 >7.7 >6 >5.5 > 5.5

Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@

2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 64 64

Vertical beam width, -3 dB (°) 14.9 13.9 13.3 12.6 12

Electrical down tilt (°) 0 - 20 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5

TILT: 0-20°/0-12°/0-12°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 22.5 (49.6)

RET AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 4x AISG

Weight, without brackets, kg (lbs) 13 (28.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 18.5 (40.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

433

Page 435: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 2.0m ALXT-824-960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

8782.0ST.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 0-12 0-12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 0-12°/0-12°/0-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 26.5 (58.4)

RET No iRET module attached

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female

Weight, without brackets, kg (lbs) 16.4 (36.1)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 21.9 (48.2)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

434

Page 436: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 2.0m ALXT-824-960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

8782.0ST.B100.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 0-12 0-12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 0-12°/0-12°/0-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 28 (61.7)

RET AISG1.1 (AISG2.0/Ericsson)

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 6x AISG

Weight, without brackets, kg (lbs) 17.9 (39)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 23.4 (48)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

435

Page 437: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 2.0m ALXT-824-960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

8782.0ST.B100.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 0 - 12 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 0-12°/0-12°/0-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET AISG1.1 (AISG2.0/Ericsson) on WHITE system

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 2x AISG

Weight, without brackets, kg (lbs) 16.9 (37.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 22.4 (49.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

436

Page 438: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 2.0m ALXT-824-960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

8782.0ST.B100.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 0 - 12 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 0-12°/0-12°/0-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 4x AISG

Weight, without brackets, kg (lbs) 17.4 (38.3)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 22.9 (50.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

437

Page 439: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 2.0m ALXT-824-960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

8782.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 0 - 12 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 0-12°/0-12°/0-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 28 (61.7)

RET AISG2.0 (AISG1.1/Ericsson)

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 6x AISG

Weight, without brackets, kg (lbs) 17.9 (39)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 23.4 (48)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

438

Page 440: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 2.0m ALXT-824-960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

8782.0ST.B400.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 0 - 12 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 0-12°/0-12°/0-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET AISG2.0 (AISG1.1/Ericsson) on WHITE system

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 2x AISG

Weight, without brackets, kg (lbs) 16.9 (37.2)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 22.4 (49.3)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

439

Page 441: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2010-06-29

i-RET ANTENNA TBB65 2.0m ALXT-824-960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

8782.0ST.B400.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >28 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >27 >27

Inter band Isolation (dB) >34 >34

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) 25 25 25 25 25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 16 15

Cross polar discrimination (XPD) ±60° (dB) >11 >9.2 >6.7 >6.3 >6.3

Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4

Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@

2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 63

Vertical beam width, -3 dB (°) 9.6 8.6 10 9.4 8.7

Electrical down tilt (°) 0 - 12 0 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4

TILT: 0-12°/0-12°/0-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27.5 (60.6)

RET AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 6x 7/16 DIN Female 4x AISG

Weight, without brackets, kg (lbs) 17.4 (38.3)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 22.9 (50.4)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

440

Page 442: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2009-07-30

i-RET ANTENNA TBB65 2.6m ALXT-824-960/1710-2170-65-17.3i/18i/18i-Ai-D

8785.0ST.0000.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 65 65 65 65 62

Vertical beam width, -3 dB (°) 7 7 7 7 6

Electrical down tilt (°) 0-10 0-10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4

TILT: 0-10°/0-10°/0-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 31.5(69.4)

RET No iRET module attached

Package size, HxWxD, mm (ft) 2800x355x255(9’2”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x155mm(8’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 6x 7/16 DIN Female

Weight, without brackets, kg (lbs) 20.7(45.6)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 26.2(57.7)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

441

Page 443: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2009-07-30

i-RET ANTENNA TBB65 2.6m ALXT-824-960/1710-2170-65-17.3i/18i/18i-Ai-D

8785.0ST.B100.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 65 65 65 65 62

Vertical beam width, -3 dB (°) 7 7 7 7 6

Electrical down tilt (°) 0-10 0-10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4

TILT: 0-10°/0-10°/0-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 33(72.7)

RET AISG1.1 (AISG2.0/Ericsson)

Package size, HxWxD, mm (ft) 2800x355x255(9’2”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x155mm(8’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 6x 7/16 DIN Female 6x AISG

Weight, without brackets, kg (lbs) 22.2(49)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 27.7(61)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

442

Page 444: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2009-07-30

i-RET ANTENNA TBB65 2.6m ALXT-824-960/1710-2170-65-17.3i/18i/18i-Ai-D

8785.0ST.B100.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 65 65 65 65 62

Vertical beam width, -3 dB (°) 7 7 7 7 6

Electrical down tilt (°) 0 - 10 0 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4

TILT: 0-10°/0-10°/0-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 32(70.5)

RET AISG1.1 (AISG2.0/Ericsson) on WHITE system

Package size, HxWxD, mm (ft) 2800x355x255(9’2”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x155mm(8’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 6x 7/16 DIN Female 2x AISG

Weight, without brackets, kg (lbs) 21.2(46.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 26.7(58.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

443

Page 445: Powerwave Product Catalog

Updated: 2010-08-04

i-RET ANTENNA TBB65 2.6m ALXT-824-960/1710-2170-65-17.3i/18i/18i-Ai-D

8785.0ST.B100.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 65 65 65 65 62

Vertical beam width, -3 dB (°) 7 7 7 7 6

Electrical down tilt (°) 0 - 10 0 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4

TILT: 0-10°/0-10°/0-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 32.5(71.7)

RET AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system

Package size, HxWxD, mm (ft) 2800x355x255(9’2”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x155mm(8’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 6x 7/16 DIN Female 4x AISG

Weight, without brackets, kg (lbs) 21.7(47.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 27.2(59.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

444

Page 446: Powerwave Product Catalog

Rev1.01 / Dec 20 2009 Updated: 2009-07-30

i-RET ANTENNA TBB65 2.6m ALXT-824-960/1710-2170-65-17.3i/18i/18i-Ai-D

8785.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 65 65 65 65 62

Vertical beam width, -3 dB (°) 7 7 7 7 6

Electrical down tilt (°) 0 - 10 0 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4

TILT: 0-10°/0-10°/0-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 33(72.7)

RET AISG2.0 (AISG1.1/Ericsson)

Package size, HxWxD, mm (ft) 2800x355x255(9’2”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x155mm(8’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 6x 7/16 DIN Female 6x AISG

Weight, without brackets, kg (lbs) 22.2(49)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 27.7(61)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

445

Page 447: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2009-07-30

i-RET ANTENNA TBB65 2.6m ALXT-824-960/1710-2170-65-17.3i/18i/18i-Ai-D

8785.0ST.B400.02

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 65 65 65 65 62

Vertical beam width, -3 dB (°) 7 7 7 7 6

Electrical down tilt (°) 0 - 10 0 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4

TILT: 0-10°/0-10°/0-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 32(70.5)

RET AISG2.0 (AISG1.1/Ericsson) on WHITE system

Package size, HxWxD, mm (ft) 2800x355x255(9’2”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x155mm(8’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 6x 7/16 DIN Female 2x AISG

Weight, without brackets, kg (lbs) 21.2(46.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 26.7(58.8)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

446

Page 448: Powerwave Product Catalog

Rev1.0 / Dec 20 2009 Updated: 2009-07-30

i-RET ANTENNA TBB65 2.6m ALXT-824-960/1710-2170-65-17.3i/18i/18i-Ai-D

8785.0ST.B400.04

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 2x1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >25

Inter band Isolation (dB) 38 38

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 15 16 15 17

Cross polar discrimination (XPD) ±60° (dB) >12 >9.5 >7.0 >7.5 >7.7

Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 806-894 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 65 65 65 65 62

Vertical beam width, -3 dB (°) 7 7 7 7 6

Electrical down tilt (°) 0 - 10 0 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4

TILT: 0-10°/0-10°/0-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 824-960, 2x1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 32.5(71.7)

RET AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system

Package size, HxWxD, mm (ft) 2800x355x255(9’2”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x155mm(8’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 6x 7/16 DIN Female 4x AISG

Weight, without brackets, kg (lbs) 21.7(47.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 27.2(59.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Triple Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

447

Page 449: Powerwave Product Catalog

iRET Antennas

POWERWAVE High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 15.6/13.5 0-16° 0.7m(2’3”) 8720.0ST.B400.00 449

65 18.3/16.2 0-10° 1.3m(4’3”) 8721.0ST.B400.00 450

65 19.5/17.4 0-6° 2.0m(6’6”) 8722.0ST.B400.00 451

448

Page 450: Powerwave Product Catalog

i-RET ANTENNA HBB65 0.7m UXM-1710-2170-65-15i-Ai-D AISGv2.0

8720.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.5 <1.5 <1.5

First null fill (dB) >-29, typical >-25 >-29, typical >-25 >-29, typical >-25

Cross polar discrimination (XPD) 0° (dB) >15 >15 >15

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >15 >15 >13

Far field coupling

Polarization Dual Linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 15/12.9 15.1/13 15.6/13.5

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >17,16,16,15,15@0,4,8,12,16 >17,16,16,15,15@0,4,8,12,16 >17,16,16,15,15@0,4,8,12,16

Power handling, average total (W) 500

Electrical down tilt (°) 0-16

Horizontal beam width, -3 dB (°) 67 65 64

Vertical beam width, -3 dB (°) 14.1 13.5 12.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15.6/13.5

TILT: 0-16°

LENGTH: 0.7m(2’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 70 (156)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 11.5 (25.3)

RET AISG2.0 (AISG1.1/Ericsson)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 880x200x200 (2’11”x8”x8”)

Brackets 7456.00A,2201.11,7454.00A,7455.00,7458.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 709x167x89.5 (2’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Weight, without brackets, kg (lbs) 4.5 (9.9)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 133 / 31 / 155

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 8.2 (18)

MECHANICAL SPECIFICATIONS*

POWERWAVE High Broadband Antennas

Rev1.02 / Feb 19 2010 Updated: 2010-04-02© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

449

Page 451: Powerwave Product Catalog

i-RET ANTENNA HBB65 1.3m UXM-1710-2170-65-18i-Ai-D AISGv2.0

8721.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

Cross polar discrimination (XPD) 0° (dB) >17 >17 >20

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >18 >14 >12

Far field coupling

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10

Power handling, average total (W) 500

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 67 66 64

Vertical beam width, -3 dB (°) 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.3/16.2

TILT: 0-10°

LENGTH: 1.3m(4’3”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 14.7 (32.4)

RET AISG2.0 (AISG1.1/Ericsson)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200mm (4’10”x8”x8”)

Brackets 7456.00A,2201.11,7454.00A,7455.00,7458.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1309x167x89.5 mm (4’3”x6”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Weight, without brackets, kg (lbs) 7.3(16)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 285 / 60 / 333

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 11(24)

MECHANICAL SPECIFICATIONS*

POWERWAVE High Broadband Antennas

Rev1.03 / Feb 19 2010 Updated: 2010-04-02© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

450

Page 452: Powerwave Product Catalog

i-RET ANTENNA HBB65 1.9m UXM-1710-2170-65-19.5i-Ai-D AISGv2.0

8722.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27

Vertical beam squint (°) 0.4 0.4 0.4

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.0

First null fill (dB) >-20, typical >-16 >-20, typical >-16 >-20, typical >-16

Cross polar discrimination (XPD) 0° (dB) >19 >19 >21

IM7, 2xTx@43dBm (dBc) <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >20 >17 >12

Far field coupling

Polarization Dual Linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 19.0/16.9 19.2/17.1 19.5/17.4

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14,14@0,1,2,3,4,5,6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6

Power handling, average total (W) 500

Electrical down tilt (°) 0-6

Horizontal beam width, -3 dB (°) 67 66 65

Vertical beam width, -3 dB (°) 4.7 4.4 4.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 19.5/17.4

TILT: 0-6°

LENGTH: 2.0m(6’6”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 15.5 (34.1)

RET AISG2.0 (AISG1.1/Ericsson)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 2105 x 200 x 200 (6’11” x 8” x 8”)

Brackets 7456.00A,2201.11,7454.00A,7455.00,7458.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1934 x 167 x 89.5 (6’4” x 6” x 3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Weight, without brackets, kg (lbs) 8.5 (18.7)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 423 / 90 / 494

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 14 (31)

MECHANICAL SPECIFICATIONS*

POWERWAVE High Broadband Antennas

Rev1.02 / Feb 19 2010 Updated: 2010-04-02© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

451

Page 453: Powerwave Product Catalog

iRET Antennas

POWERWAVE High Broadband Cross Polarized iRET 2300-2700MHz

iRET Antennas Cross Polarized High Broadband Cross Polarized iRET 2300-2700MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 18.0/15.9 0-10° 1.2m(48”) P65-18-XW2-R 453

90 16.5/14.4 0-10° 1.2m(48”) P90-17-XW2-R 454

452

Page 454: Powerwave Product Catalog

Updated: 2010-11-29

i-RET ANTENNA VHBB65 1.2m WXM-2300-2690-65-18i-Ai-D

P65-18-XW2-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 2300-2690**

Vertical beam squint (°) 0.5

Front to back ratio (dB) 180°±30° copolar >27

First null fill (dB) >-24 Typical >-18

Inter band Isolation (dB) n.a.

Tracking, horizontal plane ±60° (dB) <2.0

Front to back ratio (dB) 180°±30° total power >25

IM3, 2xTx@43dBm (dBc) <-153

Power handling, average per input (W) 250

Far field coupling n.a.

Cross polar discrimination (XPD) 0° (dB) >15

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization Dual Linear ± 45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 18.0/15.9

Isolation between inputs (dB) >30

Frequency band (MHz) 2300-2690

VSWR <1.5:1

Side lobe suppression, vertical 1st upper (dB) <18,16,15 @ 0,5,10º

Power handling, average total (W) 500

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 5.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.0/15.9

TILT: 0-10°

LENGTH: 1.2m(48”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 2300-2690**

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 12.0 (27.0)

Brackets 7456.00A, 7455.00, 7458.00A,

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480x200x200 (58”x8”x8”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1219x167x89.5 (48”x6.5”x3.5”)

MECHANICAL SPECIFICATIONS*Connector 2x7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Weight, without brackets, kg (lbs) 6.0 (13)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 262 / 66 / 303

Mounting Pre-mounted standard brackets [7456.00A]

Weight, with brackets, kg (lbs) 10.0 (21)

POWERWAVE High Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.453

Page 455: Powerwave Product Catalog

Updated: 2010-12-05

High Broadband Cross PolarizedP90-17-XW2-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 2300-2690**

Vertical beam squint (°) <1.0

Front to back ratio (dB) 180°±30° copolar >30

First null fill (dB) >-24 typical >-16

Inter band Isolation (dB)

Tracking, horizontal plane ±60° (dB) <1

Front to back ratio (dB) 180°±30° total power >28

IM3, 2xTx@43dBm (dBc) >-153

Power handling, average per input (W) 250

Far field coupling

Cross polar discrimination (XPD) 0° (dB) >15

Cross polar discrimination (XPD) ±60° (dB) >7

Polarization Dual Linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.5 (14.4)

Isolation between inputs (dB) >30

Frequency band (MHz) 2300-2690

VSWR 1.4:1

Side lobe suppression, vertical 1st upper (dB) 15

Power handling, average total (W) 500

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 90

Vertical beam width, -3 dB (°) 5.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.5 (14.4)

TILT: 0-10°

LENGTH: 1.2m (48”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 2300-2690**

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Ground

Shipping weight, kg (lbs) 12 (27)

Brackets 7456.00A, 7454.00, 7455.00, 7458.00

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1480 x 200 x 200 (58” x 8” x 8”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1219 x 167 x 100 (48” x 6” x 3.9”)

MECHANICAL SPECIFICATIONS*Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 6 (13)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 281

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 10 (21)

POWERWAVE High Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.454

Page 456: Powerwave Product Catalog

iRET Antennas

POWERWAVE Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas Cross Polarized Dual High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 18.1/16.0 0-10° 1.3m(4’3”) 8760.0ST.B100.00 456

65 18.1/16.0 0-10° 1.3m(4’3”) 8760.0ST.B400.00 457

455

Page 457: Powerwave Product Catalog

i-RET ANTENNA DHBB65 1.3m UXCM-1710-2170-65-18i/18i-Ai-D AISGv1.1

8760.0ST.B100.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >28 >28 >28

Front to back ratio (dB) 180°±30° total power >28 >28 >28

Vertical beam squint (°) <2.0 <2.0 <2.0

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >20

IM7, 2xTx@43dBm (dBc) <-160 <-160 <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >16 >13 >10

Far field coupling

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14,14@0,2,4,6,8, 10° >22,20,18,16,14,14@0,2,4,6,8, 10° >22,20,18,16,14,14@0,2,4,6,8, 10°

Power handling, average total (W) 1000

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 67 65 64

Vertical beam width, -3 dB (°) 7.1 6.8 6.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0

TILT: 0-10°

LENGTH: 1.3m(4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23.5 (51.8)

RET AISG1.1 (AISG2.0/Ericsson)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x400x200 (4’8”x1’3”x7”)

Brackets 7256.00, 7454.00A, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x343x100 (4’4”x1’1”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 529 / 63 / 615

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (42.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual High Broadband Antennas

Rev1.02 / Feb 19 2010 Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

456

Page 458: Powerwave Product Catalog

i-RET ANTENNA DHBB65 1.3m UXCM-1710-2170-65-18i/18i-Ai-D AISGv2.0

8760.0ST.B400.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 1710-2170

Front to back ratio (dB) 180°±30° copolar >28 >28 >28

Front to back ratio (dB) 180°±30° total power >28 >28 >28

Vertical beam squint (°) <2.0 <2.0 <2.0

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <2.0

First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18

Cross polar discrimination (XPD) 0° (dB) >16 >16 >20

IM7, 2xTx@43dBm (dBc) <-160 <-160 <-160

Power handling, average per input (W) 250

IM3, 2xTx@43dBm (dBc) <-153 <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >16 >13 >10

Far field coupling

Polarization Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16.0

Isolation between inputs (dB) >30 >30 >30

Frequency band (MHz) 1710-1880 1850-1990 1920-2170

VSWR <1.4:1

Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14,14@0,2,4,6,8, 10° >22,20,18,16,14,14@0,2,4,6,8, 10° >22,20,18,16,14,14@0,2,4,6,8, 10°

Power handling, average total (W) 1000

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 67 65 64

Vertical beam width, -3 dB (°) 7.1 6.8 6.2

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0

TILT: 0-10°

LENGTH: 1.3m(4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23.5 (51.8)

RET AISG2.0 (AISG1.1/Ericsson)

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x400x200 (4’8”x1’3”x7”)

Brackets 7256.00, 7454.00A, 2210.10

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x343x100 (4’4”x1’1”x3”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]

Weight, without brackets, kg (lbs) 14 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 529 / 63 / 615

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (42.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual High Broadband Antennas

Daisy chain cable included

Rev1.02 / Feb 19 2010 Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

457

Page 459: Powerwave Product Catalog

iRET Antennas

POWERWAVE Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz

iRET Antennas Cross Polarized Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 18.0/15.9, 18.0/15.9 0-10°/0-10° 0.7m(2’3”) P65-18-XHW2-RR 459

458

Page 460: Powerwave Product Catalog

i-RET ANTENNA DBB65 1.3m 1710-2170/2500-2690-65-18i/18i-D

P65-18-XHW2-RR

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visithttp://www.powerwave.com/rpa/.

Frequency range (MHz) 2500-2690 1710-2170

Front to back ratio (dB) 180°±30° copolar >27 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >26 >27 >27 >27

Vertical beam squint (°) 0.5 0.5 0.5 0.5

Tracking, horizontal plane ±60° (dB) <2 <2 <2 <2

First null fill (dB) >-24 typical >-17 >-20 typical >-17 >-20 typical >-17 >-20 typical >-17

Cross polar discrimination (XPD) 0° (dB) >15 >17 >17 >17

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 250 250

IM3, 2xTx@43dBm (dBc) <-153 <-153

Cross polar discrimination (XPD) ±60° (dB) >10 >18 >14 >10

Far field coupling - - - -

Power handling, average total (W) 500 500

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

Gain (dBi/dBd) 18.0/15.9 17.6/15.5 17.8/15.7 18.0/15.9

Inter band Isolation (dB) >35 >35

Frequency band (MHz) 2500-2690 1710-1880 1850-1990 1900-2170

VSWR <1.4:1 <1.4:1

Side lobe suppression, vertical 1st upper (dB) >20,18,15 @ 0,5,10° >20,20,20,20,18,18 @ 0,2,4,6,8,10°

>20,20,20,20,18,18 @ 0,2,4,6,8,10°

>20,20,20,20,18,18 @ 0,2,4,6,8,10°

Isolation between inputs (dB) >30 >30 >30 >30

Electrical down tilt (°) 0 - 10 0 - 10

Horizontal beam width, -3 dB (°) 65 65 65 65

Vertical beam width, -3 dB (°) 5.7 7.0 6.6 6.3

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.0/15.9, 18.0/15.9

TILT: 0-10°/0-10°

LENGTH: 1.3m (4’3”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 2500-2690, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23.5 (51.8)

RET 2xiRET 8510.40 AISGv2.0/3GPP

Package size, HxWxD, mm (ft) 1430x400x200 (56”x16”x8”)

Radome colour Light Grey

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1320x343x100 (52”x13.5”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]

Weight, without brackets, kg (lbs) 14.0 (30.8)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 529/63/615

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (42.9)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual High Broadband Antennas

Updated: 2010-12-15© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

459

Page 461: Powerwave Product Catalog

iRET Antennas

POWERWAVE Dual High Broadband Cross Polarized iRET 2300-2700MHz

iRET Antennas Cross Polarized Dual High Broadband Cross Polarized iRET 2300-2700MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 65 18.0/15.9 0-10° 1.2m(48”) P65-18-XXW2-R 461

90 16.1 0-10° 1.2m(48”) P90-17-XXW2-R 462

460

Page 462: Powerwave Product Catalog

Updated: 2010-12-05

i-RET ANTENNA DVHBB65 1.2m WXCM-2300-2690-65-18i/18i-Ai-D

P65-18-XXW2-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 2300-2690**

Vertical beam squint (°) 0.5

Front to back ratio (dB) 180°±30° copolar >27

First null fill (dB) >-24, typical >-18

Inter band Isolation (dB) n.a.

Tracking, horizontal plane ±60° (dB) <2.0

Front to back ratio (dB) 180°±30° total power >25

IM3, 2xTx@43dBm (dBc) <-153

Power handling, average per input (W) 250

Far field coupling n.a.

Cross polar discrimination (XPD) 0° (dB) >15

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization 2 x Dual Linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 18.0/15.9

Isolation between inputs (dB) >30

Frequency band (MHz) 2300-2690

VSWR <1.5:1

Side lobe suppression, vertical 1st upper (dB) <18,16,15 @ 0,5,10º

Power handling, average total (W) 1000

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 65

Vertical beam width, -3 dB (°) 5.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 18.0/15.9

TILT: 0-10°

LENGTH: 1.2m(48”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 2300-2690**

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 70(156)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 20.6(45)

Brackets 7256.00, 7454.00A, 7458.00A

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430x400x200 (56”x16”x8”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1209x343x89 (4’x1’1”x3”)

MECHANICAL SPECIFICATIONS*Connector 4x7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Weight, without brackets, kg (lbs) 12.0 (26.0)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 476 / 58 / 538

Mounting Pre-mounted heavy duty brackets [7456.00]

Weight, with brackets, kg (lbs) 17.0 (38.0)

POWERWAVE Dual High Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.461

Page 463: Powerwave Product Catalog

Updated: 2010-11-24

Dual High Broadband Cross PolarizedP90-17-XXW2-R

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 2496-2690

Vertical beam squint (°) <1.0 +/- .5°

Front to back ratio (dB) 180°±30° copolar >30 @ 180°

First null fill (dB) >-24,typical>-18

Inter band Isolation (dB) N/A

Tracking, horizontal plane ±60° (dB) <3.0

Front to back ratio (dB) 180°±30° total power >25 @ +/-30° cone

IM3, 2xTx@43dBm (dBc) <-153

Power handling, average per input (W) 250

Far field coupling N/A

Cross polar discrimination (XPD) 0° (dB) >15

Cross polar discrimination (XPD) ±60° (dB) >10

Polarization 2 x Dual linear ±45°

Nominal Impedance (Ω) 50

Gain (dBi/dBd) 16.1 (Average)

Isolation between inputs (dB) >30

Frequency band (MHz) 2496-2690

VSWR <1.5:1

Side lobe suppression, vertical 1st upper (dB) 12 @ 0°, 17 @ 5°, 15 @ 10°

Power handling, average total (W) 1000

Electrical down tilt (°) 0-10

Horizontal beam width, -3 dB (°) 90 +/- 6°

Vertical beam width, -3 dB (°) 5.5

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.1 (Average)

TILT: 0-10°

LENGTH: 1.2M (48”)

POLARIZATION: XXPol

FREQUENCY (MHz): 2496-2690

HORIZONTAL BEAM WIDTH (°): 90

Operating Temperature -30 to +70C

Radome material ASA

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 20 (45)

Brackets 7456.00A, 7454.00, 7455.00, 7458.00

Radome colour Light Grey

Package size, HxWxD, mm (ft) 1430 x 400 x 200 (4’8” x 1’3” x 8”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1219 x 343 x 100 (48” x 13.5” x 3.9”)

MECHANICAL SPECIFICATIONS*Connector 4 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14.2 (32)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 520

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19.5 (44)

POWERWAVE Dual High Broadband Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.462

Page 464: Powerwave Product Catalog

iDiplexer antennas combine the performance of Powerwave’s high performing multiband antenna line and external diplexer into one product. iDiplexed antennas offer a reduced amount of connectors and feeder lines to customers who are limited in adding additional feeders due to windload and space limitation on towers. Customers can rapidly deploy an additional overlay network by just exchanging the existing antennas with iDiplexed antennas and reusing the existing feeders. iDiplexed antennas usually combine the low band and high band frequencies into a single pair of connectors, still keeping the independent variable downtilt capability.

iDiplexer AntennasPower wave

Page 465: Powerwave Product Catalog

iDiplexer Antennas

POWERWAVE iDiplexer Antennas

iDiplexer Antennas Cross Polarized Multi Broadband Cross Polarized Antennas

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page

65 17.4/15.3, 17.6/15.5, 17.4/15.3 2-8°/2-10°/2-10° 2.6m (8’6”) P65-18-XDHW2-ND1 465

65 16.0/13.9, 15.9/13.8, 15.8/13.7 2-10°/2-12°/2-12° 2.0m (6’6”) P65-17-XDHW2-ND1 466

65 14.5/12.4, 14.6/12.5, 14.4/12.3 2-12°/2-14°/2-14° 1.4m (4’7”) P65-15-XDHW2-ND1 467

65 17.3/15.2, 17.8/15.7 MET (with IntegratedDiplexer)

2.6m (8’6”) 7755.OST.0002.00 468

65 16.7/14.6, 17.4/15.3 MET (with IntegratedDiplexer)

2.0m (6’6”) 7752.OST.0002.00 469

65 15/12.9, 18/15.9 MET (with IntegratedDiplexer)

1.4m (4’7”) 7750.OST.0002.00 470

464

Page 466: Powerwave Product Catalog

Updated: 2010-12-09

Triple Broadband Cross Polarized 790-960MHz,1710-2170MHz, 2500-2690MHz integrated diplexer LB/HB

P65-18-XDHW2-ND1

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 790-960 1710-2170; 2500-2690

Vertical beam squint (°) 0.8 0.8 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >28 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >27 >27 >27 >27 >27

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <2.0 <2.0 <1.5 <1.5 <1.5

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 200 200

Cross polar discrimination (XPD) 0° (dB) >13 >13 >13 >13 >13

Cross polar discrimination (XPD) ±60° (dB) - - - - -

Far field coupling - - - - -

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 790-894 880-960 1710-1880 1900-2170 2500-2690

Gain (dBi/dBd) 16.2/14.1 17.4/15.3 17.2/15.1 17.6/15.5 17.4/15.3

Side lobe suppression, vertical 1st upper (dB) >15 >15 >15 >15 >15

Power handling, average total (W) 400 400

Horizontal beam width, -3 dB (°) 72 67 63 60 62

Vertical beam width, -3 dB (°) 7.5 6.9 6.9 6.2 5.0

Electrical down tilt (°) 2 - 8 2 - 10

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.4/15.3, 17.6/15.5, 17.4/15.3

TILT: 2-8°/2-10°/2-10°

LENGTH: 2.6m(8’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 790-960, 1710-2170, 2500-2690

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material ASA

Survival wind speed, m/s (mph) 55(123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 33.3(73.3)

RET 8210.40, 8210.10, 8230.40, 8230.10

Package size, HxWxD, mm (ft) 2847x355x255(9’4”x1’2”x10”)

Radome colour Light Gray

Brackets 7256.00, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2705x282x155mm(8’10”x11”x6”)

Maximum operational wind speed, m/s (mph) 42(93)

Connector 4x 7/16 DIN Female

Weight, without brackets, kg (lbs) 22.5(49.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 28(61.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE iDiplexer Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

465

Page 467: Powerwave Product Catalog

Updated: 2010-12-09

Triple Broadband Cross Polarized 790-960MHz, 1710-2170MHz, 2500-2690MHz integrated diplexer LB/HB

P65-17-XDHW2-ND1

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 790-960 1710-2170; 2500-2690

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >28 >30 >27 >27 >27

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >25 >25

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <1.0 <1 <1.5 <2 <4

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 200 200

Cross polar discrimination (XPD) 0° (dB) >13 >13 >13 >13 >13

Cross polar discrimination (XPD) ±60° (dB) - - - - -

Far field coupling - - - - -

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 790-894 880-960 1710-1880 1900-2170 2500-2690

Gain (dBi/dBd) 15.6/13.5 16.0/13.9 15.8/13.7 15.9/13.8 15.8/13.7

Side lobe suppression, vertical 1st upper (dB) >15 >15 >15 >15 >15

Power handling, average total (W) 400 400

Horizontal beam width, -3 dB (°) 78 67 66 63 66

Vertical beam width, -3 dB (°) 11.0 8.6 10.0 8.7 7.9

Electrical down tilt (°) 2 - 10 2 - 12

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.0/13.9, 15.9/13.8, 15.8/13.7

TILT: 2-10°/2-12°/2-12°

LENGTH: 2.0m(6’6”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 790-960, 1710-2170, 2500-2690

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 26.5 (58.4)

RET 8210.40, 8210.10, 8230.40, 8230.10

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Light Grey

Brackets 7256.00,7454.00A,2210.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x155mm (6’8”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4x 7/16 DIN Female

Weight, without brackets, kg (lbs) 16.4 (36.1)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted standard brackets

Weight, with brackets, kg (lbs) 21.9 (48.2)

MECHANICAL SPECIFICATIONS*

POWERWAVE iDiplexer Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

466

Page 468: Powerwave Product Catalog

Updated: 2010-12-09

Triple Broadband Cross Polarized 790-960MHz,1710-2170MHz, 2500-2690MHz integrated diplexer LB/HB

P65-15-XDHW2-ND1

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 790-960 1710-2170; 2500-2690

Vertical beam squint (°) 0.7 0.7 0.7 1 1

Front to back ratio (dB) 180°±30° copolar >27 >28 >28 >28 >28

Front to back ratio (dB) 180°±30° total power >24 >24 >24 >24 >24

Inter band Isolation (dB) >30 >30

Tracking, horizontal plane ±60° (dB) <1 <2 <1.5 <1.2 <4

First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 200 200

Cross polar discrimination (XPD) 0° (dB) >13 >13 >13 >13 >13

Cross polar discrimination (XPD) ±60° (dB) - - - - -

Far field coupling - - - - -

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 790-894 880-960 1710-1880 1900-2170 2500-2690

Gain (dBi/dBd) 13.2/11.1 14.5/12.4 14.2/12.1 14.6/12.5 14.4/12.3

Side lobe suppression, vertical 1st upper (dB) >15 >15 >15 >15 >15

Power handling, average total (W) 400 400

Horizontal beam width, -3 dB (°) 78 67 66 63 66

Vertical beam width, -3 dB (°) 18.0 13.9 13.8 12.4 11.0

Electrical down tilt (°) 2 - 12 2 - 14

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 14.5/12.4, 14.6/12.5, 14.4/12.3

TILT: 2-12°/2-14°/2-14°

LENGTH: 1.4m(4’7”)

POLARIZATION: XXX-Pol

FREQUENCY (MHz): 790-960, 1710-2170, 2500-2690

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material PVC

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 23 (50.7)

RET 8210.40, 8210.10, 8230.40, 8230.10

Package size, HxWxD, mm (ft) 1550x355x200 (5’1”x1’2”x7”)

Radome colour Light Grey

Brackets 7256.00, 2210.10, 7454.00A

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x155mm (4’7”x11”x6”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 4x 7/16 DIN Female

Weight, without brackets, kg (lbs) 13.5 (30)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 415

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 19 (42)

MECHANICAL SPECIFICATIONS*

POWERWAVE iDiplexer Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

467

Page 469: Powerwave Product Catalog

Updated: 2010-12-02

Dual Broadband Cross Polarized With Integrated Diplexer

7755.0ST.0002.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) 0.5 0.5 0.5 0.5 0.5

Front to back ratio (dB) 180°±30° copolar >30 >30 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25 >25 >25

Inter band Isolation (dB) 38 -

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.5 <1 <3.5

First null fill (dB) >-25 >-25 >-25 >-25 >-25

IM3, 2xTx@43dBm (dBc) <-150 <-150

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) 16 14 16 16 16

Cross polar discrimination (XPD) ±60° (dB) >11 > 9.5 > 6.3 >7.2 >7.5

Far field coupling <0.3 <0.41 <0.53 <0.58 <0.58

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1:5:1

Isolation between inputs (dB) 30 30 30 30 30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170

Gain (dBi/dBd) 16.6/14.5 17.3/15.2 17.3/15.2 17.6/15.5 17.8/15.7

Side lobe suppression, vertical 1st upper (dB) >18,18,17,16,16@ >18,18,17,16,16@ >17,16,15,14,13@ >17,17,16,15,14@ >17,17,16,15,14@

2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8° 2,4,6,8°

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 65 65 62

Vertical beam width, -3 dB (°) 7.4 7.0 6.9 6.4 6.1

Electrical down tilt (°) 2 to 8 0 to 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7

TILT: MET (with Integrated Diplexer)

LENGTH: 2.6m (8’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC grounded

Shipping weight, kg (lbs) 32.5 (71.6)

RET 8210.40, 8210.10, 8220.40, 8220.10

Packet size, HxWxD, mm (ft) Light Grey

Radome colour 2800x355x255 (9’2”x1’2”x10”)

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2658x280x125mm (8’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 19.6 (43)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 880

Mounting Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs) 25.1 (55)

MECHANICAL SPECIFICATIONS*

POWERWAVE iDiplexer Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

468

Page 470: Powerwave Product Catalog

Updated: 2010-12-02

Dual Broadband Cross Polarized With Integrated Diplexer

7752.0ST.0002.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) <1 <1 <1 <1 <1

Front to back ratio (dB) 180°±30° copolar >30 >30 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >25 >25 >25 >25 >25

Inter band Isolation (dB) - -

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.5 <1.5 <1.5

First null fill (dB) >-25 >-25 >-25 >-25 >-25

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) - <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) >16 >15 >16 >16 >16

Cross polar discrimination (XPD) ±60° (dB) > 12 > 9.5 > 6.2 >6.5 > 7.5

Far field coupling <0.26 <0.39 <0.5 <0.59 <0.59

Polarization Dual linear ±45° Dual linear ±45°

Nominal Impedance (Ω) 50 50

VSWR 1.5:1 1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15.7/14.0 16.6/14.5 17.0/14.9 17.2/15.1 17.5/15.4

Side lobe suppression, vertical 1st upper (dB) >17,16,15,14 @ >17,16,15,14 @ >18,17,15,14 @ >18,17,15,14 @ 0,2,4,8 >18,17,15,14 @ 0,2,4,8

2,4,6,8º 2,4,6,8º 0,2,4,8º 0,2,4,8º 0,2,4,8º

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 71 67 63 63 60

Vertical beam width, -3 dB (°) 9.6 8.9 7 7 6.2

Electrical down tilt (°) 2-9 0-8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 16.7/14.6, 17.4/15.3

TILT: MET (with Integrated Diplexer)

LENGTH: 2.0m (6’6”)

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 70 (156)

Lightning protection DC grounded

Shipping weight, kg (lbs) 27 (59.5)

RET 8210.40, 8210.10, 8220.40, 8220.10

Package size, HxWxD, mm (ft) 2175x355x255 (7’2”x14”x10”)

Radome colour Grey (RAL 7035 on all visible plastic parts)

Brackets 7256.00, 7454.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 2033x280x125mm (6’8”x11”x4”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 16.0 (35)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 653

Mounting Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs) 19.8 (44)

MECHANICAL SPECIFICATIONS*

POWERWAVE iDiplexer Antennas

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

469

Page 471: Powerwave Product Catalog

Dual Broadband Cross Polarized With Integrated Diplexer

7750.0ST.0002.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 824-960 1710-2170

Vertical beam squint (°) <1 <1 <1 <1 <1

Front to back ratio (dB) 180°±30° copolar >26 >26 >30 >30 >30

Front to back ratio (dB) 180°±30° total power >26 >26 >25 >25 >25

Inter band Isolation (dB) 40

Tracking, horizontal plane ±60° (dB) <1.0 <1.0 <1.5 <1.5 <1.5

First null fill (dB) >20 >20 >20 >20 >20

IM3, 2xTx@43dBm (dBc) <-153 <-153

IM7, 2xTx@43dBm (dBc) NA <-160

Power handling, average per input (W) 300 250

Cross polar discrimination (XPD) 0° (dB) >17 >17 >18 >18 >18

Cross polar discrimination (XPD) ±60° (dB) >11 >11 >10 >10 >10

Far field coupling - - - - -

Polarization Dual linear ± 45º Dual linear ± 45º

Nominal Impedance (Ω) 50 50

VSWR >1.5:1 >1.5:1

Isolation between inputs (dB) >30 >30 >30 >30 >30

Frequency band (MHz) 824-880 880-960 1710-1880 1850-1990 1920-2170

Gain (dBi/dBd) 15/12.9 15/12.9 17.3/15.2 17.3/15.2 18/15.9

Side lobe suppression, vertical 1st upper (dB) >21,20,17,16 @ >21,20,17,16 @ >18,17,15,14 @ >18,17,15,14 @ >18,17,15,14 @

2,4,8,12º 2,4,8,12º 0,2,4,8º 0,2,4,8º 0,2,4,8º

Power handling, average total (W) 600 500

Horizontal beam width, -3 dB (°) 68 ± 3º 68 ± 3º 67 ± 2º 67 ± 2º 62 ± 4º

Vertical beam width, -3 dB (°) 14 14 7 7 6.2

Electrical down tilt (°) 2 - 12 0 - 8

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 15/12.9, 18/15.9

TILT: MET (with Integrated Diplexer)

LENGTH: 1.4M

POLARIZATION: XX-Pol

FREQUENCY (MHz): 824-960, 1710-2170

HORIZONTAL BEAM WIDTH (°): 65

Operating Temperature -40°C to +60°C

Radome material GRP

Survival wind speed, m/s (mph) 55 (123)

Lightning protection DC Grounded

Shipping weight, kg (lbs) 23 (50.6)

RET 8210.40, 8210.10, 8220.40, 8220.10

Package size, HxWxD, mm (ft) 1550x355x255mm (61”x14”x10”)

Radome colour Grey (RAL 7035 on all visible plastic parts)

Brackets 7456.00A, 7454.00, 7455.00, 7458.00

Connector position Bottom

Dimensions, HxWxD, mm (ft) 1408x280x125mm (4’9”x11”x5”)

Maximum operational wind speed, m/s (mph) 42 (93)

Connector 2 x 7/16 DIN Female

Weight, without brackets, kg (lbs) 14.3 (31.5)Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) 435

Mounting Pre Mounted Standard Brackets

Weight, with brackets, kg (lbs) 18 (39.6)

MECHANICAL SPECIFICATIONS*

POWERWAVE iDiplexer Antennas

Updated: 2010-12-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

470

Page 472: Powerwave Product Catalog

The Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a master control unit (MCU) that controls the antenna line devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Remote Electrical Tilt (RET)Power wave

Page 473: Powerwave Product Catalog

Remote Electrical Tilt

POWERWAVE Remote Electrical Tilt (RET)

RET PageSingle Band RET 473 Dual Band RET 482 Triple Band RET 485 iRET Antenna Controller Module PageiRET 8510 488 Master Control Units PageMCU 491 Current Injector Layer One Converter PageCILOC 498 RET System Cables PageRET System Cables 505

472

Page 474: Powerwave Product Catalog

Remote Electrical Tilt

POWERWAVE Single Band RET

Remote Electrical Tilt Single Band RET

Standard Power Supply Start-up Surge

Current Consumption(idle) Part Number Page

AISG V2.0/3GPP (AISG1.1, Ericsson configurable)

+10 to +30 V <1mC 19V 8110.40 474

AISG V2.0/3GPP (AISG1.1, Ericsson configurable)

+10 to +30 V <1mC 19V 8210.40 475

AISG1.1 (AISG V2.0/3GPP, Ericsson configurable)

+10 to +30 V <1mC 19V 8110.10 476

AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC 19V 8212.10 477

AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC 19V 8212.40 478

AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC 19V 8211.10 479

AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC 19V 8211.40 480

AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC 19V 8212.10 481

473

Page 475: Powerwave Product Catalog

Single Band RET8110.40

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8110.40

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 62 x 78 x 216

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Rev1.0 / Oct 27 2009 Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

474

Page 476: Powerwave Product Catalog

Single Band RET for Multiband Antennas (Controlling white antenna array)8210.40

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8210.40

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

475

Page 477: Powerwave Product Catalog

Single Band RET8110.10

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8110.10

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 62 x 78 x 216

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Rev1.0 / Oct 27 2009 Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

476

Page 478: Powerwave Product Catalog

Single Band RET for Multiband Antennas (Controlling blue antenna array)8212.10

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8212.10

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG V1.1 (V2.0/3GPP, Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

477

Page 479: Powerwave Product Catalog

Single Band RET for Multiband Antennas (Controlling blue antenna array)8212.40

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8212.40

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

478

Page 480: Powerwave Product Catalog

Single Band RET for Multiband Antennas (Controlling red antenna array)8211.10

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8211.10

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG V1.1 (V2.0/3GPP, Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

479

Page 481: Powerwave Product Catalog

Single Band RET for Multiband Antennas (Controlling red antenna array)8211.40

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8211.40

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

480

Page 482: Powerwave Product Catalog

Single Band RET for Multiband Antennas (Controlling blue antenna array)8212.10

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8212.10

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65C

Standard AISG V1.1 (V2.0/3GPP, Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-10 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

481

Page 483: Powerwave Product Catalog

Remote Electrical Tilt

POWERWAVE Dual Band RET

Remote Electrical Tilt Dual Band RET

Standard Power Supply Start-up Surge

Current Consumption(idle) Part Number Page

AISG V2.0/3GPP (AISG1.1, Ericsson configurable)

+10 to +30 V <1mC 19V 8220.40 483

AISG v1.1 +10 to +30 V <1mC 19V 8220.10 484

482

Page 484: Powerwave Product Catalog

Dual Band RET8220.40

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8220.40

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65° C

Standard AISG V2.0/3GPP (AISG1.1)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-08-19 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

483

Page 485: Powerwave Product Catalog

DualBand RET8220.10

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8220.10

AISG Data Rate 9.6kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin>19V

Rod positioning accuracy <±0.8mm

Type Approvals Conformity with the relevent provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65°C

Standard AISG v1.1 (AISG V2.0/3GPP)

Current Consumption during tilting <400mA at Vin ,19V, <250mA at Vin>19V

Power supply +10 to +30 V

MTBF >500,000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-08-19 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

484

Page 486: Powerwave Product Catalog

Remote Electrical Tilt

POWERWAVE Triple Band RET

Remote Electrical Tilt Triple Band RET

Standard Power Supply Start-up Surge

Current Consumption(idle) Part Number Page

AISG V2.0/3GPP (AISG1.1, Ericsson configurable)

+10 to +30 V <1mC 19V 8230.40 486

AISG v1.1 +10 to +30 V <1mC 19V 8230.10 487

485

Page 487: Powerwave Product Catalog

Triple Band RET8230.40

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8230.40

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65° C

Standard AISG V2.0/3GPP (AISG1.1)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-08-19 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

486

Page 488: Powerwave Product Catalog

Triple Band RET8230.10

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8230.10

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy < +/- 0.8mm

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65° C

Standard AISG v1.1 (AISG V2.0/3GPP)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 1 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground M6 screw

Dimensions (W,L,H) (mm) 125 x 213 x 62 (excluding mounting screws)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-08-19 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

487

Page 489: Powerwave Product Catalog

Remote Electrical Tilt

POWERWAVE iRET Antenna Controller Module

Remote Electrical Tilt iRET Antenna Controller Module 8510

Standard Power Supply Start-up Surge

Current Consumption(idle) Part Number Page

AISG V2.0/3GPP (AISG1.1, Ericsson configurable)

+10 to +30 V <1mC 19V 8510.10 489

AISG V2.0/3GPP (AISG1.1, Ericsson configurable)

+10 to +30 V <1mC 19V 8510.40 490

488

Page 490: Powerwave Product Catalog

iRET ANTENNA CONTROLLER MODULE8510.10

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8510.10

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy NA

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65°C

Standard AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 0.33 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground Grounded Via Antenna

Dimensions (W,L,H) (mm) 125 x 65 x 26 (excluding connectors)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-30 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

489

Page 491: Powerwave Product Catalog

iRET ANTENNA CONTROLLER MODULE8510.40

RET SYSTEM*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Product Number 8510.40

AISG Data Rate 9.6 kbps

Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V

Rod positioning accuracy NA

Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

Operating Temperature -40 to +65°C

Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V

Power supply +10 to +30 V

MTBF >500.000 hrs.

Start up surge <1mC

ELECTRICAL SPECIFICATIONS*

Weight 0.33 kg

Connector AISG IEC 60130-9 (Ed 3.0)

Ingress protection IP65

Environmental ETSI 300 019

Connector Protection Ground Grounded Via Antenna

Dimensions (W,L,H) (mm) 125 x 65 x 26 (excluding connectors)

MECHANICAL SPECIFICATIONS*

This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.

POWERWAVE Remote Electrical Tilt

Updated: 2010-05-31 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

490

Page 492: Powerwave Product Catalog

Master Control Unit

POWERWAVE Master Control Unit

Remote Electrical Tilt Master Control Unit

Type Current Consumption Power Supply Part Number Page

Master Control Unit 115/230 VAC 1.7 / 1.0A AC 7070.10 (AC) 492

Master Control Unit 24V / <5.0A 24V 7070.30 (24 V) 493

Master Control Unit 48V / <2.5A -48V 7070.50 (-48V) 494

Layer One Converter Master Control Unit 115/230 VAC 1.7 / 1.0A AC 7072.10 (AC) 495

Layer One Converter Master Control Unit 24V / <5.0A 24V 7072.30 (24 V) 496

Layer One Converter Master Control Unit 48V / <2.5A -48V 7072.50 (-48V) 497

491

Page 493: Powerwave Product Catalog

POWERWAVE Master Control Unit

Max current draw per connector 2.7 A

Total current draw all connectors 3.48 A

Surge at start up all connectors 54 mC during <10 ms

ALD supply voltage +24 V DC

ELECTRICAL SPECIFICATIONSPower supply AC

AC / Current consumption 115/230 VAC 1.7 / 1.0A

Output current at closed 5 ± 2mA

Output voltage at open 5 ±1 V

LOCAL ALARM PORTS (IN port)

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

Local alarm Connector panel

RS-232 9-pin d-SUB male

Environmental ETSI 300 019 * Weather-protected locations*

Operating temperature -5C to 60C

MTBF >250.000 hrs

AC power supply IEC/EB60320-1 Male

DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1

ENVIRONMENTAL SPECIFICATIONS

Local (Ethernet port) 4-pole RJ45 MDI

Site LAN 4-pole RJ45 MDI

RET 1 to 3 IEC 60130-9 (Ed. 3.0)

7070.10 (AC) Master Control Unit

AISG data rate 9.6 kbps, 38.4 kbps

Weight < 2.5 kg

Dimensions Width 19” rack, Height 44mm, Depth 207mm

Max input current 0.5 A

LOCAL CONTROL PORTS(Out ports, 3-pole relays)

Max input Voltage 30 V DC

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08237 Rev A Updated: 2008-03-31 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

492

Page 494: Powerwave Product Catalog

POWERWAVE Master Control Unit

Max current draw per connector 2.7 A

Total current draw all connectors 3.48 A

Surge at start up all connectors 54 mC during <10 ms

ALD supply voltage +24 V DC

ELECTRICAL SPECIFICATIONSPower supply 24V

DC / Current consumption 24V / <5.0A

Output current at closed 5 ± 2mA

Output voltage at open 5 ±1 V

LOCAL ALARM PORTS (IN port)

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

Local alarm Connector panel

RS-232 9-pin d-SUB male

Environmental ETSI 300 019 * Weather-protected locations*

Operating temperature -5C to 60C

MTBF >250.000 hrs

AC power supply IEC/EB60320-1 Male

DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1

ENVIRONMENTAL SPECIFICATIONS

Local (Ethernet port) 4-pole RJ45 MDI

Site LAN 4-pole RJ45 MDI

RET 1 to 3 IEC 60130-9 (Ed. 3.0)

7070.30 (24 V) Master Control Unit

AISG data rate 9.6 kbps, 38.4 kbps

Weight < 2.5 kg

Dimensions Width 19” rack, Height 44mm, Depth 207mm

Max input current 0.5 A

LOCAL CONTROL PORTS(Out ports, 3-pole relays)

Max input Voltage 30 V DC

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08237 Rev A Updated: 2008-10-22 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

493

Page 495: Powerwave Product Catalog

POWERWAVE Master Control Unit

Max current draw per connector 2.7 A

Total current draw all connectors 3.48 A

Surge at start up all connectors 54 mC during <10 ms

ALD supply voltage +24 V DC

ELECTRICAL SPECIFICATIONSPower supply -48V

DC / Current consumption 48V / <2.5A

Output current at closed 5 ± 2mA

Output voltage at open 5 ±1 V

LOCAL ALARM PORTS (IN port)

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

Local alarm Connector panel

RS-232 9-pin d-SUB male

Environmental ETSI 300 019 * Weather-protected locations*

Operating temperature -5C to 60C

MTBF >250.000 hrs

AC power supply IEC/EB60320-1 Male

DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1

ENVIRONMENTAL SPECIFICATIONS

Local (Ethernet port) 4-pole RJ45 MDI

Site LAN 4-pole RJ45 MDI

RET 1 to 3 IEC 60130-9 (Ed. 3.0)

7070.50 (-48V) Master Control Unit

AISG data rate 9.6 kbps, 38.4 kbps

Weight < 2.5 kg

Dimensions Width 19” rack, Height 44mm, Depth 207mm

Max input current 0.5 A

LOCAL CONTROL PORTS(Out ports, 3-pole relays)

Max input Voltage 30 V DC

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08237 Rev A Updated: 2008-03-31 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

494

Page 496: Powerwave Product Catalog

POWERWAVE Master Control Unit

Max current draw per connector 2.7 A

Total current draw all connectors 3.48 A

Surge at start up all connectors 54 mC during <10 ms

ALD supply voltage +24 V DC

ELECTRICAL SPECIFICATIONSPower supply AC

AC / Current consumption 115/230 VAC 1.7 / 1.0A

Output current at closed 5 ± 2mA

Output voltage at open 5 ±1 V

LOCAL ALARM PORTS (IN port)

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

Local alarm Connector panel

RS-232 9-pin d-SUB male

Environmental ETSI 300 019 * Weather-protected locations*

Operating temperature -5C to 60C

MTBF >250.000 hrs

AC power supply IEC/EB60320-1 Male

DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1

ENVIRONMENTAL SPECIFICATIONS

Local (Ethernet port) 4-pole RJ45 MDI

Site LAN 4-pole RJ45 MDI

RET 1 to 3 SMA (female)

7072.10 (AC) Layer One Converter Master Control Unit

AISG data rate 9.6 kbps, 38.4 kbps

Weight < 2.5 kg

Dimensions Width 19” rack, Height 44mm, Depth 207mm

Max input current 0.5 A

LOCAL CONTROL PORTS(Out ports, 3-pole relays)

Max input Voltage 30 V DC

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08238 Rev A Updated: 2008-05-20 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

495

Page 497: Powerwave Product Catalog

POWERWAVE

Max current draw per connector 1.16 A

Total current draw all connectors 3.48 A

Surge at start up all connectors 54 mC during <10 ms

ALD supply voltage +24 V DC

ELECTRICAL SPECIFICATIONSPower supply 24V

DC / Current consumption 24V / <5.0A

Output current at closed 5 ± 2mA

Output voltage at open 5 ±1 V

LOCAL ALARM PORTS (IN port)

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

Local alarm Connector panel

RS-232 9-pin d-SUB male

Environmental ETSI 300 019 * Weather-protected locations*

Operating temperature -5C to 60C

MTBF >250.000 hrs

AC power supply IEC/EB60320-1 Male

DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1

ENVIRONMENTAL SPECIFICATIONS

Local (Ethernet port) 4-pole RJ45 MDI

Site LAN 4-pole RJ45 MDI

RET 1 to 3 SMA (female)

7072.30 (24 V) Layer One Converter Master Control Unit

AISG data rate 9.6 kbps, 38.4 kbps

Weight < 2.5 kg

Dimensions Width 19” rack, Height 44mm, Depth 207mm

Max input current 0.5 A

LOCAL CONTROL PORTS(Out ports, 3-pole relays)

Max input Voltage 30 V DC

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08238 Rev A Updated: 2008-10-22 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Master Control Unit

496

Page 498: Powerwave Product Catalog

POWERWAVE

Max current draw per connector 1.16 A

Total current draw all connectors 3.48 A

Surge at start up all connectors 54 mC during <10 ms

ALD supply voltage +24 V DC

ELECTRICAL SPECIFICATIONSPower supply -48V

DC / Current consumption 48V / <2.5A

Output current at closed 5 ± 2mA

Output voltage at open 5 ±1 V

LOCAL ALARM PORTS (IN port)

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

Local alarm Connector panel

RS-232 9-pin d-SUB male

Environmental ETSI 300 019 * Weather-protected locations*

Operating temperature -5C to 60C

MTBF >250.000 hrs

AC power supply IEC/EB60320-1 Male

DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1

ENVIRONMENTAL SPECIFICATIONS

Local (Ethernet port) 4-pole RJ45 MDI

Site LAN 4-pole RJ45 MDI

RET 1 to 3 SMA (female)

7072.50 (-48V) Layer One Converter Master Control Unit

AISG data rate 9.6 kbps, 38.4 kbps

Weight < 2.5 kg

Dimensions Width 19” rack, Height 44mm, Depth 207mm

Max input current 0.5 A

LOCAL CONTROL PORTS(Out ports, 3-pole relays)

Max input Voltage 30 V DC

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08238 Rev A Updated: 2008-06-02 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Master Control Unit

497

Page 499: Powerwave Product Catalog

Remote Electrical Tilt

POWERWAVE Current Injector Layer One Converter

Remote Electrical Tilt Current Injector Layer One Converter

Frequency Range (MHz) Insertion Loss (dB)

Return Loss (dB) ANT Port

Return Loss (dB) BTS Port Part Number Page

806-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB 7060.00 (ANT) 499

806-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB 7060.10 (BTS) 500

698-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB 7060.05 (ANT) 501

698-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB 7060.15 (BTS) 502

800-2300 MHz <0.1 dB >22 dB >22 dB 1001940 (BTS side) 503

800-2300 MHz <0.1 dB >22 dB >22 dB 1001983 (ANT side) 504

498

Page 500: Powerwave Product Catalog

POWERWAVE Current Injector Layer One Converter

Current Handling = 1.3 A

Current Consumption < 50 mA

Power Supply +9 to +31 V

AISG Data Rate 9.6 kbps, 38.4 kbps

Power Consumption N/A

Down-link(MHz) 1930-1990

Up-Link(MHz) 1850-1910

Power Handling(dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Frequency Range 806-960 MHz and 1710-2180 MHz

Range(MHz) 806-960 MHz and 1710-2180 MHz

ELECTRICAL DATA

Insertion Loss(dB) <0.2 dB

Passive Intermodulation 2X43 dBm <-116 dBm

Return Loss(dB) BTS Port >20 dB

Return Loss(dB) ANT Port >20 dB

Protection Ground M8 screw

AISG Output IEC 60130-9 E (Ed 3.0)

Ingress Protection IP65 N/A

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Dimension HxWxD mm(ft) <48 x 92 x 80

MECHANICAL SPECIFICATIONS

RF Connectors DIN 7/16 female/ male

Weight(kg) <750 g

MTBF > 500,000 hrs

Ingress Protection IP65

ENVIRONMENTAL SPECIFICATIONSOperating Temperature (C) -40 to +65 C

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Environmental ETSI 300 019

APPROVAL AND TESTS

7060.00 (ANT) Current Injector Layer One Converter

The purpose of this long sentence is to push down the line.

D031-08236 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

499

Page 501: Powerwave Product Catalog

POWERWAVE Current Injector Layer One Converter

Current Handling = 1.3 A

Current Consumption < 50 mA

Power Supply +9 to +31 V

AISG Data Rate 9.6 kbps, 38.4 kbps

Power Consumption N/A

Down-link(MHz) 1930-1990

Up-Link(MHz) 1850-1910

Power Handling(dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Frequency Range 806-960 MHz and 1710-2180 MHz

Range(MHz) 806-960 MHz and 1710-2180 MHz

ELECTRICAL DATA

Insertion Loss(dB) <0.2 dB

Passive Intermodulation 2X43 dBm <-116 dBm

Return Loss(dB) BTS Port >20 dB

Return Loss(dB) ANT Port >20 dB

Protection Ground M8 screw

AISG Output IEC 60130-9 E (Ed 3.0)

Ingress Protection IP65 N/A

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Dimension HxWxD mm(ft) <48 x 92 x 80

MECHANICAL SPECIFICATIONS

RF Connectors DIN 7/16 female/ male

Weight(kg) <750 g

MTBF > 500,000 hrs

Ingress Protection IP65

ENVIRONMENTAL SPECIFICATIONSOperating Temperature (C) -40 to +65 C

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Environmental ETSI 300 019

APPROVAL AND TESTS

7060.10 (BTS) Current Injector Layer One Converter

The purpose of this long sentence is to push down the line.

D031-08236 Rev A Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

500

Page 502: Powerwave Product Catalog

POWERWAVE Current Injector Layer One Converter

Current Handling = 1.3 A

Current Consumption < 50 mA

Power Supply +9 to +31 V

AISG Data Rate 9.6 kbps, 38.4 kbps

Power Consumption N/A

Down-link(MHz)

Up-Link(MHz)

Power Handling(dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Frequency Range 698-960 MHz and 1710-2180 MHz

Range(MHz) 698-960 MHz and 1710-2180 MHz

ELECTRICAL DATA

Insertion Loss(dB) <0.2 dB

Passive Intermodulation 2X43 dBm <-116 dBm

Return Loss(dB) BTS Port >20 dB

Return Loss(dB) ANT Port >20 dB

Protection Ground M8 screw

AISG Output IEC 60130-9 E (Ed 3.0)

Ingress Protection IP65 N/A

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Dimension HxWxD mm(ft) <48 x 92 x 80

MECHANICAL SPECIFICATIONS

RF Connectors 7/16 Male/BTS, Female/ANT side

Weight(kg) <750 g

MTBF > 500,000 hrs

Ingress Protection IP65

ENVIRONMENTAL SPECIFICATIONSOperating Temperature (C) -40 to +65 C

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Environmental ETSI 300 019

APPROVAL AND TESTS

7060.05 (ANT) Current Injector Layer One Converter

The purpose of this long sentence is to push down the line.

D031-08236 Rev B Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

501

Page 503: Powerwave Product Catalog

POWERWAVE Current Injector Layer One Converter

Current Handling = 1.3 A

Current Consumption < 50 mA

Power Supply +9 to +31 V

AISG Data Rate 9.6 kbps, 38.4 kbps

Power Consumption N/A

Down-link(MHz)

Up-Link(MHz)

Power Handling(dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Frequency Range 698-960 MHz and 1710-2180 MHz

Range(MHz) 698-960 MHz and 1710-2180 MHz

ELECTRICAL DATA

Insertion Loss(dB) <0.2 dB

Passive Intermodulation 2X43 dBm <-116 dBm

Return Loss(dB) BTS Port >20 dB

Return Loss(dB) ANT Port >20 dB

Protection Ground M8 screw

AISG Output IEC 60130-9 E (Ed 3.0)

Ingress Protection IP65 N/A

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Dimension HxWxD mm(ft) <48 x 92 x 80

MECHANICAL SPECIFICATIONS

RF Connectors 7/16 Female/BTS, Male/ANT side

Weight(kg) <750 g

MTBF > 500,000 hrs

Ingress Protection IP65

ENVIRONMENTAL SPECIFICATIONSOperating Temperature (C) -40 to +65 C

Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Environmental ETSI 300 019

APPROVAL AND TESTS

7060.15 (BTS) Current Injector Layer One Converter

The purpose of this long sentence is to push down the line.

D031-08236 Rev B Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

502

Page 504: Powerwave Product Catalog

POWERWAVE Current Injector Layer One Converter

Current Handling <4.0 A

Current Consumption

Power Supply +10 to+30V

AISG Data Rate 9.6 kbps,38.4 kbps

Power Consumption

Down-link(MHz)

Up-Link(MHz)

Power Handling(dBm) 750W =500W (800 MHz)+ 250W (1900MHz)

Frequency Range 800-2300

Range(MHz)

ELECTRICAL DATA

Insertion Loss(dB) <0.1 dB

Passive Intermodulation 2X43 dBm <-130 dBm (7th)

Return Loss(dB) BTS Port >22 dB

Return Loss(dB) ANT Port >22 dB

Protection Ground

AISG Output

Ingress Protection IP65

Type Approvals Bellcore #TA-NWT-000487 Procedure 4.11

Dimension HxWxD mm(ft) < 3.7 x 1.7 x 5.7 excl. conn

MECHANICAL SPECIFICATIONS

RF Connectors DIN 7/16 female/male

Weight(kg) < 2

MTBF >500.000 hrs.

Ingress Protection IP67

ENVIRONMENTAL SPECIFICATIONSOperating Temperature (C) -40 to +85C

Type Approvals Bellcore #TA-NWT-000487 Procedure 4.11

Environmental

APPROVAL AND TESTS

1001940 (BTS side) Current Injector Layer One Converter

The purpose of this long sentence is to push down the line.

High RF power CILOC for communication and DC supply over the RF feeder to the ALDs

Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

503

Page 505: Powerwave Product Catalog

POWERWAVE Current Injector Layer One Converter

Current Handling <4.0 A

Current Consumption

Power Supply +10 to+30V

AISG Data Rate 9.6 kbps,38.4 kbps

Power Consumption

Down-link(MHz)

Up-Link(MHz)

Power Handling(dBm) 750W =500W (800 MHz)+ 250W (1900MHz)

Frequency Range 800-2300

Range(MHz)

ELECTRICAL DATA

Insertion Loss(dB) <0.1 dB

Passive Intermodulation 2X43 dBm <-130 dBm (7th)

Return Loss(dB) BTS Port >22 dB

Return Loss(dB) ANT Port >22 dB

Protection Ground

AISG Output

Ingress Protection IP65

Type Approvals Bellcore #TA-NWT-000487 Procedure 4.11

Dimension HxWxD mm(ft) < 3.7 x 1.7 x 5.7 excl. conn

MECHANICAL SPECIFICATIONS

RF Connectors DIN 7/16 female/male

Weight(kg) < 2

MTBF >500.000 hrs.

Ingress Protection IP67

ENVIRONMENTAL SPECIFICATIONSOperating Temperature (C) -40 to +85C

Type Approvals Bellcore #TA-NWT-000487 Procedure 4.11

Environmental

APPROVAL AND TESTS

1001983 (ANT side) Current Injector Layer One Converter

The purpose of this long sentence is to push down the line.

High RF power CILOC for communication and DC supply over the RF feeder to the ALDs

Updated: 2010-04-05© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

504

Page 506: Powerwave Product Catalog

Remote Electrical Tilt

POWERWAVE RET System Cables

Remote Electrical Tilt RET System Cables

Continuous Current DC Ports

Continuous AISG Output Input

Operation Temperature Range Conductor Area

Part Number Page

3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65C 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)

7085.XX 506

3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65C 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)

7095.XX 507

505

Page 507: Powerwave Product Catalog

RET System Cables7085.XX

Product Number 7085.XX

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG

Conductor Area 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)

Environmental ETSI 300 019

Ingress Protection IP67 mated

Continuous Current DC Ports 3.5 A

Operation Temperature Range -40 to +65

Color Black

Connectors AISG Output Input IEC 60130-9 (Ed. 3.0)

SPECIFICATIONS*

POWERWAVE RET System Cables

8-Pin Connector

Pin 6 +24 V +24 V

Pin 5 RS-485A RS-485A

Pin 8 Not connected Not connected

Pin 7 DC return DC return

Pin 2 Not connected Not connected

Pin 1 +12 V +12 V

Pin 4 Not connected Not connected

Pin 3 RS-485B RS-485B

7085.05 RET short cable 0.5m

7085.50 RET short cable 5.0m

7085.30 RET short cable 3.0m

7085.15 RET short cable 1.5m

ooPPPP Updated: 2010-04-05© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.506

Page 508: Powerwave Product Catalog

RET Systems Cable7095.XX

Product Number 7095.XX

Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG

Conductor Area 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)

Environmental ETSI 300 019

Ingress Protection IP67 mated

Continuous Current DC Ports 3.5 A

Operation Temperature Range -40 to +65C

Color Black

Connectors AISG Output Input IEC 60130-9 (Ed. 3.0)

SPECIFICATIONS*

POWERWAVE RET System Cables

8-Pin Connector

Pin 6 +24 V +24 V

Pin 5 RS-485A RS-485A

Pin 8 Not connected Not connected

Pin 7 DC return DC return

Pin 2 Not connected Not connected

Pin 1 +12 V +12 V

Pin 4 Not connected Not connected

Pin 3 RS-485B RS-485B

7095.10 RET long cable 10m

7095.80 RET long cable 80m

7095.70 RET long cable 70m

7095.110 RET long cable 110m

7095.90 RET long cable 90m

7095.60 RET long cable 60m

7095.30 RET long cable 30m

7095.20 RET long cable 20m

7095.50 RET long cable 50m

7095.40 RET long cable 40m

© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-04-05

507

Page 509: Powerwave Product Catalog

The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from 800 MHz up to 2500 MHz and supports multiband operation. Easy-to-install dual band antennas from Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of discreetly functional design beats using numerous antennas of unsightly size and appearance especially with today’s aesthetic concerns.

Indoor AntennasPower wave

Page 510: Powerwave Product Catalog

Indoor Antennas

POWERWAVE Indoor Antennas

Indoor Dual Band Antennas Cross Polarized PageIndoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz 510 Indoor Multiband Antennas Vertical Polarized PageIndoor Multiband Vertical Polarized Antennas, 800-2500 MHz 512

509

Page 511: Powerwave Product Catalog

Dual Band Indoor Antennas

POWERWAVE Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz

Dual Band Indoor Antennas Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 70 9/6.9, 9/6.9 0 216mm (8.5”) 7999.00 511

510

Page 512: Powerwave Product Catalog

Indoor/Outdoor Dual Band Cross Polarized7999.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 800/1900

Front to back ratio (dB) 180°±30° copolar 16 28

Electrical down tilt (°) 0 0

Vertical beam width, -3 dB (°) 70 60

IM3, 2xTx@43dBm (dBc) <-141

Cross polar discrimination (XPD) ±60° (dB) 8 4

Cross polar discrimination (XPD) 0° (dB) 20 15

Power handling, average total (W) 50

Gain (dBi/dBd) 9/6.9 9/6.9

Frequency band (MHz) 806-896 1850-1990

Horizontal beam width, -3 dB (°) 72 56

VSWR 1.5:1 1.5:1

Nominal Impedance (Ω) 50

Polarization X-Pol

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 9/6.9, 9/6.9

TILT: 0°

LENGTH: 216mm (8.5”)

POLARIZATION: X-Pol

FREQUENCY (MHz): 800/1900

HORIZONTAL BEAM WIDTH (°): 70

Operating Temperature

Shipping weight, kg (lbs) -

Radome material -

Package size, HxWxD, mm (ft) -

Radome colour RAL 7035, Light grey

Connector 2 x N Female

Weight, kg (lbs) 0.73 (1.6)

Connector position Bottom

Mounting -

Dimensions, HxWxD, mm (ft) 216x216x73.7 (8.5”x8.5”x2.9”)

MECHANICAL SPECIFICATIONS*

POWERWAVE Dual Band Indoor Antennas

D031-08182 Rev A Updated: 2010-04-09 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

511

Page 513: Powerwave Product Catalog

Multiband Indoor Antennas

POWERWAVE Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz

Multiband Indoor Antennas Cross Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz

Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page 60/90 6/3.9, 9/6.9 0 0.210m (8") 7336.10 513

360 3/0.9 0 0.185m ( 7”) 7336.00 514

512

Page 514: Powerwave Product Catalog

Indoor Multiband Panel Vertical Polarized7336.10

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 800-2500

Vertical beam width, -3 dB (°) 85 80 40 40

Horizontal beam width, -3 dB (°) 95 85 65 60

Electrical down tilt (°) 0

IM3, 2xTx@43dBm (dBc) <-150

Front to back ratio (dB) 180°±30° copolar 16 15 12 17

Power handling, average total (W) 50

Frequency band (MHz) 806-896 870-960 1700-1900 1900-2500

VSWR <1.9:1 <1.5:1 <1.9:1 <1.8:1

Gain (dBi/dBd) 6.5/4.4 6.5/4.4 9.5/7.4 10/7.9

Nominal Impedance (Ω) 50

Polarization Vertical

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 6/3.9, 9/6.9

TILT: 0°

LENGTH: 0.210m (8”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 800-2500

HORIZONTAL BEAM WIDTH (°): 60/90

Operating Temperature

Shipping weight, kg (lbs) 1.2 (2.6)

Radome material ASA

Package size, HxWxD, mm (ft) 240x280x45 (9”x11”x2”)

Radome colour White

Connector 1 x N Female

Weight, kg (lbs) 1.0 (2.2)

Connector position Bottom

Mounting -

Dimensions, HxWxD, mm (ft) 210 x 180 x 42 (8”x7”x2”)

MECHANICAL SPECIFICATIONS*

POWERWAVE Multiband Indoor Antennas

D031-08159 Rev A © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.Updated 04/09/2010

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.513

Page 515: Powerwave Product Catalog

Indoor Multiband Vertical Polarized7336.00

ANTENNA PATTERNS*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

For detailed patterns visit http://www.powerwave.com/rpa/.

Frequency range (MHz) 800-2500

Beam width: Ceiling Mounted (°) 360 360 360 360

VSWR 1.5:1 1.5:1 1.5:1 1.5:1

IM3, 2xTx@43dBm (dBc) <-150

Beam width: Wall Mounted (°) 70 70 70 70

Power handling, average total (W) 50

Frequency band (MHz) 806-896 870-960 1700-1900 1900-2500

Nominal Impedance (Ω) 50

Polarization Vertical

Gain (dBi/dBd) 3/0.9 3/0.9 3/0.9 3/0.9

ELECTRICAL SPECIFICATIONS*

GAIN (dBi/dBd): 3/0.9

TILT: 0°

LENGTH: 0.185m ( 7”)

POLARIZATION: V-Pol

FREQUENCY (MHz): 800-2500

HORIZONTAL BEAM WIDTH (°): 360

Operating Temperature

Shipping weight, kg (lbs) 0.36 (0.8)

Radome material ABS

Package size, HxWxD, mm (ft) 210x200x115 (8”x8”x5”)

Radome colour White

Connector 1 x N Female

Weight, kg (lbs) 0.2 (0.44)

Connector position Back

Mounting -

Dimensions, diameter x depth, mm (ft) 185 x65 (7” x 2.5”)

MECHANICAL SPECIFICATIONS*

POWERWAVE Multiband Indoor Antennas

D031-08158 Rev A Updated: 2010-04-09© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

514

Page 516: Powerwave Product Catalog

Powerwave’s Clean Site solutions minimize the visual impact of a complete antenna system and significantly reduce investment and operational costs for network operators when building new or upgrading existing networks.

Building permits for existing antenna installations can be used when replacing old, passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly and shortens roll-out time considerably.

All Clean Site antennas support remote electrical tilt for optimization of the coverage footprint and tuning of network performance. By integrating all functionality into one single unit, Clean Site offers you a flexible and attractive solution in the most cost-effective way.

Clean Site™ SolutionsPower wave

Page 517: Powerwave Product Catalog

Clean Site Solutions: OverviewPOWERWAVE

Clean Site Solutions

Our products provide design and installation flexibility that meet a variety of needs, such as enabling co-siting of networks and systems and dealing with space and zoning issues limiting the appearance and location of new installations.

The Powerwave Clean Site program integrates a full range of multiband solutions to make the most of tower space. High-volume production in several countries ensures rapid delivery.

Our low band antenna covers the full frequency range from 806-960 MHz while the high band antenna covers 1710- 2170 MHz. Customize your Clean Site single unit by combining a low band antenna with a remote electrical tilt (RET) Unit or a high band antenna with a tower mounted amplifier (TMA) for either an 1800, 1900 or 2100 frequency band and RET Unit. No matter the combination, your customized Clean Site single system is contained in one single housing enclosure.

Single System

The baseline for the Clean Site single system is our single band broadband antenna portfolio with cross polar diversity for either low band or high band.

IntelliMast

As a part of the Powerwave Clean Site program, the IntelliMast offers a flexible way of integrating multi-sector solutions in a pole configuration under one single radome. IntelliMast-CS, supporting the full broad band antenna range, is the mounting solution to use when more than one sector is covered from a single location. If a crane free installation is required, the super light weight Intellimast-PL is the solution to use, supporting the 1.4m (4 feet) multiband antennas. The IntelliMast solution offers maximum sector coverage with minimum visual impact.

The Powerwave Clean Site triple solution is the most advanced antenna system within the Clean Site program. The Clean Site triple solution is based on the high performance triple band antenna platform and is the superior solution for co-siting. An old installed passive antenna can be replaced by a Clean Site triple system with remote electrical tilt (RET) Control and two dual TMAs and two triplexers without changing the visual impact.

The Clean Site dual solution's basic configuration stems from the Powerwave dual band low band/high band antennas. Combine the dual band antenna with remote electrical tilt (RET) units, tower mounted amplifiers (TMA) and diplex filters to suit your network requirements. As with all Clean Site units, all of the necessary components are contained in one discrete enclosure.

Dual System

Triple System

516

Page 518: Powerwave Product Catalog

All Powerwave antennas are delivered with mounting brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a robust and rigid design is ensured.

Mounting SolutionsPower wave

Page 519: Powerwave Product Catalog

Mounting Solutions

POWERWAVE Mounting Solutions

Heavy Duty Tilt Bracket Part Numbers Page7256.00 519 Tilt Bracket Part Numbers Page7456.00A 520 Triple Mount Bracket Part Numbers Page7454.00A 521 Large Pole Mounting Adapter Part Numbers Page7458.00A 522

518

Page 520: Powerwave Product Catalog

Heavy Duty Tilt Bracket Kit7256.00

MECHANICAL DRAWINGS

Family Part Number

City 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx

ALP 7804.00, 7824.00, 7834.00, 7838.00

TBB65 778x.xx, 778x.xxA, 578x.xx, 878x.0ST.xxxx.xx

AL Antennas 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x

Xurban 7227.1x

Urban 7218.1x

LBB90 748x.xx, 748x.xxA, 548x.xx

LBB65 747x.xx, 747x.xxA, 547x.xx, 746x.0ST.xxxx.xx

DBB90 777x.xx

5 Series 547x.xx, 548x.xx, 576x.xx, 575x.xx, 578x.xx, 5722.xx

DBB65 775x.xx, 775x.xxA, 5475x.xx, 875x.0ST.xxxx.xx

DHBB 776x.xx, 776x.xxA, 576x.xx, 876x.0ST.xxxx.xx

CROSS REFERENCE TABLE

Dimensions, H x W x D See Drawings

Tilt range See diagram

Shipping weight 5.9 kg/ 13 lbs

Panning range NA

Pole dimension 25.4-114.3 mm (1-4.5”)

Weight 5.5 kg/ 12.1 lbs

Packing size, H x W x D Call for info

Accessory products Triple Mount Bracket 7454.00

Material Galvanized steel

MECHANICAL SPECIFICATIONS TILT ANGLE GRAPH

ANTENNA LENGTH: =1.5 meter/5 feet

WEIGHT: 5.5 kg/ 12.1 lbs

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets.

Random Vibration: IEC 60068-2-64

Sinus Vibration: IEC 60028-2-6

Salt Mist: IEC 68-2-11, test Ka, 35° C, 48h, 5% salt

POWERWAVE Mounting Solutions

Updated: 2010-10-25 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

519

Page 521: Powerwave Product Catalog

Tilt Bracket Kit7456.00A

MECHANICAL DRAWINGS

Family Part Number

City NA

ALP NA

TBB65 NA

AL Antennas 7337.0x, 7338.0x, 7339.0x

Xurban 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x

Urban 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x

LBB90 NA

LBB65 NA

DBB90 NA

5 Series 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0

DBB65 NA

DHBB NA

CROSS REFERENCE TABLE

Dimensions, H x W x D See Drawings

Tilt range See diagram

Shipping weight 4.0 kg/ 8.8 lbs

Panning range NA

Pole dimension 25-115 mm

Weight 3.6 kg/7.9 lbs

Packing size, H x W x D Call for info

Accessory products Panning Kit 2201.11/ Big Pole Clamp, 7458.00/ Flush wall, pole clamp 7455.00 and Triple Mount Bracket 7454.00

Material Galvanized steel, stainless screws & nuts

MECHANICAL SPECIFICATIONS TILT ANGLE GRAPH

ANTENNA LENGTH: <1.5 meter/ 5 feet

WEIGHT: 3.6 kg/7.9 lbs

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets.

Random Vibration: IEC 60068-2-64

Sinus Vibration: IEC 60028-2-6

Salt Mist: IEC 68-2-11, test Ka, 35° C, 48h, 5% salt

POWERWAVE Mounting Solutions

D031-08419 Rev. A Updated: 2010-04-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

520

Page 522: Powerwave Product Catalog

Triple Mount Bracket7454.00A

MECHANICAL DRAWINGS

Family Part Number

City 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx

ALP 7804.00, 7824.00, 7834.00, 7838.00

TBB65 778x.x0

AL Antennas 7337.0x, 7338.0x, 7339.0x, 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x

Xurban 7227.1x, 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x

Urban 7218.1x, 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x

LBB90 748x.xx

LBB65 747x.xx

DBB90 777x.x0

5 Series 747x.xx, 748x.xx, 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0, 776x.xx, 775x.x0, 777x.x0, 778x.x0

DBB65 775x.x0

DHBB 776x.xx

CROSS REFERENCE TABLE

Dimensions, H x W x D See Drawings

Tilt range See diagram, Only antennas <1.5 m/ 5 feet

Shipping weight Call for info

Panning range Call for info

Pole dimension 75-114 mm

Weight 6.8 kg/15 lbs

Packing size, H x W x D Call for info

Accessory products Can be used with antenna tilt brackets 7456.00A and 7256.00

Material Steel

MECHANICAL SPECIFICATIONS TILT ANGLE GRAPH

The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation. The Triple Mount Bracket permits independent mechanical and electrical tilting of each sector, offering unparalleled versat

ANTENNA LENGTH: =1.5 meter/5 feet

WEIGHT: 1.5 kg/3.3 lbs

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets.

Random Vibration: NA

Sinus Vibration: NA

Salt Mist: NA

POWERWAVE Mounting Solutions

D031-08417 Rev. A Updated: 2010-04-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

521

Page 523: Powerwave Product Catalog

Large Pole Mounting Adapter7458.00A

MECHANICAL DRAWINGS

Family Part Number

City NA

ALP NA

TBB65 NA

AL Antennas 7337.0x, 7338.0x, 7339.0x

Xurban 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x

Urban 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x

LBB90 NA

LBB65 NA

DBB90 NA

5 Series NA

DBB65 NA

DHBB NA

CROSS REFERENCE TABLE

Dimensions, H x W x D See Drawings

Tilt range NA

Shipping weight 10 kg/22 lbs

Panning range NA

Pole dimension Max 215/ mm 78.5”

Weight 9.5 kg/ 20.9 lbs

Packing size, H x W x D 200 x 200 x 20 (mm)

Accessory products To be used with antenna tilt brackets 7456.00A

Material Galvanized steel, stainless screws & nuts

MECHANICAL SPECIFICATIONS TILT ANGLE GRAPH

Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below. Only one kit per antenna.

ANTENNA LENGTH: <1.5 meter/ 5 feet

WEIGHT: 9.5 kg/ 20.9 lbs

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets.

Random Vibration: IEC 60068-2-64

Sinus Vibration: IEC 60028-2-6

Salt Mist: IEC 68-2-11, test Ka, 35° C, 48h, 5% salt

POWERWAVE Mounting Solutions

D031-08520 Rev. A Updated: 2010-04-05 © Copyright 2010 Powerwave Technologies, Inc. All rights reserved.All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

522

Page 524: Powerwave Product Catalog

Antenna FAQPOWERWAVE

Antenna FAQ

A: Yes, these antennas work from 806 MHz through 2.5 GHz, providing an effective solution for multiple technologies such as iDEN, CDMA, GSM, UMTS, WiFi to name a few.

Q: Are your indoor antennas broadband (7336.00, 7336.10)?

A: The gain is dependent on the frequency used. The stacking distance of the elements is changed relative to the frequency. This means that the gain will increase with a higher frequency. Powerwave always tries to give you the best information possible, and therefore we specify the gain at common used frequency to help you implement the antennas easily in your network.

Q: Why do you specify different gain for the same antenna in your data sheet?

A: Mechanical structure of antennas are designed in different ways. Powerwave uses either the reflector as the structure, or the radome in a combination with the reflector. When using the reflector as the base for the mechanical structure, the radome is only used for weather protection, and therefore we use a light plastic radome (ASA/GRP). When increasing the size of an antenna there is no benefit to use the reflector as the mechanical structure as it would increase the overall weight of the product. Therefore, when building larger sized antennas, Powerwave utilizes a combination of reflector and radome as the mechanical structure. Normally, a glass fibre radome is used in the latter instances. Thus, the mechanical structures of the Powerwave antennas are designed to minimize product weight while maintaining a robust and reliable solution.

Q: Why do you use different materials in your radomes?

A: Powerwave designs triple band antennas by using one low band antenna throughout the whole length, while you have the two upper band antennas on top of each other. This means that the high band antenna at the upper part of the antenna needs more internal cabling compared to the high band antenna at the lower part. This extra internal cabling introduces some more losses, and the result is that the gain of the upper high band antenna is slightly lower.

Q: Why do you have different gain on your triple band antennas?

A: The antenna patterns are available at our webpage, please visit: www.powerwave.com/antennapatterns.asp. On this page you are able to download our antenna patterns for many different planning tools. Please contact us if you need assistance.

Q: How do I get antenna patterns?

A: When Powerwave is stating broadband antennas, we are indicating that these can be used for more than one system. We usually state low broadband, meaning that the antennas can be used for systems operating from 806 to 960 MHz. High band usually means that the antennas can be used for systems from 1710 to 2170. Some antennas may differ from this. The reason why we design and produce broadband antennas is to achieve logistical benefits for our global customer base, allowing for deployments in all markets worldwide.

Q: You are mentioning broadband antennas - how do you define that?

523

Page 525: Powerwave Product Catalog

Powerwave’s NetWay™ solution suite maximizes return on investment of wireless infrastructure by enabling network discovery, diagnosis and resolution from a centralized software interface in combination with network-aware hardware. NetWay gives you all the tools for fault, configuration, performance and security management. Centrally monitor and manage critical network resources, and adjust cell coverage during peak and off-peak hours, saving time, money and reducing the carbon footprint through fewer truck rolls.

Network ManagementPower wave

Page 526: Powerwave Product Catalog

POWERWAVE NetWay Vision Software Solution

© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

NWV-001 NetWay Vision Management Module

Updated: 2010-11-30

Documentation User Guide: D044-05258, Administrator Guide: D044-05313

Extended Warranty Yearly Software Upgrades and Yearly Updates are available and can be separately purchased

Planned upcoming Release NetWay Vision R3.6.0 (Dec - 2010)Commercialize Current Release NetWay Vision R3.5.0 (Aug - 2010)

Standard Warranty Updates and fixes for one full year, after installation of NetWay Vision is completed

NetWay Vision Licensing Software license based on number of managed network elements and number of con-current PC client users

GENERAL SPECIFICATIONS

User PC Client Requirements Intel Based PC equipped with Color Monitor, Ethernet 10/100/1000 Base-T Network Interface, Windows XP, Internet Explorer 6/7

NetWay Server Requirements Rack mounted or standalone Intel Based Server equipped with, Ethernet 100/1000 Base-T Network Interface, Windows Server OS 2003/2008

The NetWay Vision software product is an Element Management System (EMS), developed and supported by Powerwave Technologies. The NetWay Vision product provides service providers with centralized monitoring and management capabilities for advanced wireless systems, supplied by Powerwave Technologies.

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.525

Page 527: Powerwave Product Catalog

Part Number Index Part NPart Number Index

Part Number Index POWERWAVE

Part Number Page Part Number Page Part Number Page010-11177-0214 30 7218.13 340 7334.06B 404010-11182-02nn 31 7218.14 341 7336.00 514010-11183-02nn 32 7218.15 345 7336.10 513010-50025-0232 33 7218.19 346 7390.00B 3261001940 (BTS side) 503 7225.04 357 7454.00A 5211001983 (ANT side) 504 7226.03 358 7456.00A 52024501, 24511 29 7226.04 359 7458.00A 52225001, 25011 34 7227.04 364 7471.00 26825002, 25012 35 7227.14 363 7472.00 27225014, 25016 36 7228.03 366 7473.00 27625101, 25111 37 7228.04 367 7476.06 26725102, 25112 38 7228.06 368 7477.00 26925103, 25113 39 7228.08 369 7477.02 2704168.11.33.00 350 7230.04 371 7477.06 2734168.11.33.02 351 7231.04 372 7478.00 2714168.11.33.03 352 7231.06 373 7478.02 2744168.11.33.06 353 7232.04 374 7478.06 2754168.11.33.52 354 7232.07 375 7481.00 2774168.21.33.00 348 7233.04 376 7482.00 2824168.21.33.03 349 7233.06 377 7483.00 2855471.00 259 7233.08 378 7486.00 2785472.00 260 7255.03 335 7486.02 2795473.00 261 7255.04 342 7486.06 2805477.00 262 7256.00 519 7487.00 2815478.00 263 7263.01 333 7488.00 2835478.06 264 7263.04 334 7488.02 2845483.00 265 7270.02 356 7700.00 2545488.00 266 7271.02 360 7700.06 2415701.02 237 7271.03 361 7701.00 2475721.00 238 7272.02 365 7701.02 2425721.02 239 7273.02 370 7701.06 2435722.00 240 7273.03 362 7701.1ST.0000.01 2505782.00 319 7281.02 336 7720.00 2537060.00 (ANT) 499 7281.04 337 7721.00 2487060.05 (ANT) 501 7282.03 329 7721.02 2447060.10 (BTS) 500 7329.00B 380 7721.06 2457060.15 (BTS) 502 7329.06B 381 7721.10 2467070.10 (AC) 492 7330.00B 382 7721.40 2497070.30 (24 V) 493 7330.02B 383 7722.00 2517070.50 (-48V) 494 7330.04B 384 7735.00A 2527072.10 (AC) 495 7330.06B 385 7740.00A 2557072.30 (24 V) 496 7331.00B 386 7745.00A 2567072.50 (-48V) 497 7331.02B 387 7750.00 3097085.XX 506 7331.04B 388 7750.0S0.0000.00 3107095.XX 507 7331.06B 389 7750.1ST.0000.00 3087216.03 328 7332.00B 402 7750.90 3117217.03 332 7332.02B 399 7750.OST.0002.00 4707217.04 331 7332.06B 400 7752.00 3137217.11 330 7333.00B 397 7752.0S0.0000.00 3147218.03 338 7333.02B 396 7752.90 3127218.04 339 7333.06B 398 7752.OST.0002.00 4697218.05 343 7334.00B 403 7755.00 3157218.09 344 7334.02B 401 7755.0S0.0000.00 317

526

Page 528: Powerwave Product Catalog

Part Number Index

POWERWAVE Part Number Index

Part Number Page Part Number Page Part Number Page7755.90 316 8782.0ST.B400.02 439 AR3400/01109 1517755.OST.0002.00 468 8782.0ST.B400.04 440 AR3400/91109 1527760.00 301 8785.0ST.0000.00 441 AR3434/51109 1537760.02 300 8785.0ST.B100.00 442 AR3700/50409 1017760.03 302 8785.0ST.B100.02 443 AR4200/01209 1547760.06 303 8785.0ST.B100.04 444 AR4600/05309 1557762.00 305 8785.0ST.B400.00 445 AR4640/05309 1567765.00 304 8785.0ST.B400.02 446 AR6500/00109 1027766.00 306 8785.0ST.B400.04 447 AR6512/00229 1047770.00A 391 ALR0062/00109 116 AR6512/00239 1037772.00A 392 ALR1200/00209 118 AR6517/01429 1057775.00A 393 ALR1200/90209 117 AR6517/01429 1077780.00 320 ALR1212/00102 119 AR6517/01439 1067782.00 321 ALR1212/00209 120 AR6517/01459 1087785.00 322 ALR2200/00209 121 AR6522/01100 1097824.00 298 ALR2200/90209 122 AR6522/01109 1107840.00 395 ALR2212/00119 123 AR6522/91100 1117850.00B 405 ALR2212/00129 124 AR6560/00209 1127999.00 511 ALR2222/00109 125 ATR1200/001xy (GSM 900) 1588110.10 476 ALR3200/00 126 ATR1200/002xy (GSM 900) 1598110.40 474 ALR3200/00109 127 ATR1200/901xy (EGSM 900) 1608210.40 475 ALR3200/01109 128 ATR1200/902xy (EGSM 900) 1618211.10 479 ALR3200/90109 129 CEV-000-000-001 828211.40 480 ALR3200/91109 130 CM1000-AMPS-xxx 648212.10 477 ALR3232/51109 131 CM1001-EGSM-xxx 658212.10 481 ALR3242/03039 132 CM1005-DBPXBC 678212.40 478 ALR3246/00309 133 CM1006-TBPXBC 688220.10 484 ALR4200/00209 134 CM1007-DBPXBC-xxx 668220.40 483 ALR4200/01109 135 CW0-000-000-003 808230.10 487 ALR4200/01209 136 G3L-1829-120 98230.40 486 ALR4600/00109 137 G3L-1929-160 108510.10 489 ALR4600/00119 138 G3L-2129-140 118510.40 490 ALR4600/00209 139 G3L-850-160 78720.0ST.B400.00 449 ALR6200/00109 140 G3L-929-135 88721.0ST.B400.00 450 ALR6212/90129 141 LGP121nn 568722.0ST.B400.00 451 ALR6212/90139 142 LGP138nn 618760.0ST.B100.00 456 ALS6200/00 145 LGP141nn 718760.0ST.B400.00 457 ALT1200/00209 143 LGP145nn 698763.0ST.0000.00 424 AM1200/05309 146 LGP146nn 708763.0ST.B100.00 425 AR0027/50409 91 LGP174nn 418763.0ST.B400.00 426 AR0065/00109 92 LGP175nn 428780.0ST.0000.00 427 AR1200/05309 147 LGP18104 578780.0ST.B100.00 428 AR1200/95209 148 LGP18520, LGP18521 438780.0ST.B100.02 429 AR1700/80 93 LGP185nn 448780.0ST.B100.04 430 AR1700/90209 96 LGP186nn 458780.0ST.B400.00 431 AR1700/90409 95 LGP192nn 408780.0ST.B400.02 432 AR1700/90419 94 LGP195nn 728780.0ST.B400.04 433 AR1717/90609 97 LGP213nn 598782.0ST.0000.00 434 AR2200/00109 149 LGP215nn 468782.0ST.B100.00 435 AR2212/05209 150 LGP219nn 738782.0ST.B100.02 436 AR2700/50209 98 LGP233nn 608782.0ST.B100.04 437 AR2700/50409 99 LNKA800 1718782.0ST.B400.00 438 AR2727/50609 100 LNKA900 174

527

Page 529: Powerwave Product Catalog

Part Number Index

POWERWAVE Part Number Index

Part Number Page Part Number PageLNKC1800 175 RH200020/101 192LNKC1900 173 RH200020/211 193LNKF100 176 RH201022/101 194LNKF400 172 RH201022/211 195LNKF800 177 RH300020/101 196MF0-004-000-002 77 RH300020/211 197MF0-048-000-001 78 RH304022/03A 222NP50B0-22111 163 RH304022/101 198NP5O-11111 164 RH304022/211 199NPBO-11111 165 RH305022/03A 223NWV-001 525 RH308022/03A 224OS-0851-P0-XXX 13 RH309022/101 200OS-0921-V0-XXX 19 RH309022/211 201OS-0951-P0-XXX 14 RH330020/101 202OS-1821-H0-XXX 20 RH334022/101 203OS-1851-H0-XXX 15 RH400020/101 204OS-1921-H0-XXX 21 RH400020/211 205OS-1933-E0-XXX 23 RH500020/101 206OS-1951-E0-XXX 16 RH500020/211 207OS-1991-H0-XXX 24 RH600020/101 208OS-2133-E0-XXX 25 RH600020/211 209OS-2151-E0-XXX 17 RH601022/101 210P65-15-XDHW2-ND1 467 RH601022/211 211P65-15-XL-2 290 RH602022/101 212P65-15-XL-4 291 RH602022/211 213P65-15-XL-R 409 RH621010 185P65-15-XLH-RR 416 RH700030/101 182P65-16-XL-2 292 RH700030/101 214P65-16-XL-4 293 RH705032/101 215P65-16-XL-6 294 RH770020/101 216P65-16-XL-R 410 RH805022/101 217P65-16-XLH-RR 417 RH805022/211 218P65-17-XDHW2-ND1 466 RH900020/101 219P65-17-XL-2 295 RH900020/211 220P65-17-XL-4 296 SB400-A 168P65-17-XL-R 411 SB400-B 169P65-17-XLH-RR 418 Tap-In 180P65-18-XDHW2-ND1 465 TS07-AWDB111-001 51P65-18-XHW2-RR 459 TSAW-07BP111-001 47P65-18-XXW2-R 453 TT08-19DB111-001 52P65-18-XXW2-R 461 TT19-08BP111-001 53P90-14-XL-R 412 TTAW-0000112-001 49P90-14-XLH-RR 419 TTAW-07BP111-001 48P90-15-XL-R 413 TTAW-60BW111-001 50P90-15-XLH-RR 420 TU09-000001n-001 54P90-16-XL-R 414 UA107 62/1 227P90-16-XLH-RR 421 UA107 62/2 228P90-17-XXW2-R 454 UA107 62/3 229P90-17-XXW2-R 462 UA107 62/4 230RH004000/003 184 VersaFlex 7.0 84RH004002/001 189 VersaFlex 9.0 85RH100020/101 190 RH100020/211 191

528

Page 530: Powerwave Product Catalog

Sales by Region

U.S. & Canada [email protected] Latin America [email protected] Europe [email protected] Middle East & Africa [email protected] Asia-Pacific [email protected]

Support by RegionCustomerserviceoffered24hoursaday

Customer Service+1888PWRWAVE(+18887979283)

Technical Support – [email protected]+1888PWRWAVEext.3(+18887979283)

Technical Support – [email protected]

Technical Support – [email protected]+46854082200

Worldwide Corporate Headquarters1801EastSt.AndrewPlaceSantaAna,CA92705USA+17144661000+17144665800FAX

Quality and Environmental Management System Certifications

ISO 9001

TL 9000

TickIT

ISO 14001

P OW E RWAV E Contact Us

www.powerwave.com

Page 531: Powerwave Product Catalog

D031-08643 Rev. D 02/11

Worldwide Corporate Headquarters1801 East St. Andrew PlaceSanta Ana, CA 92705 USA+1 714 466 1000+1 714 466 5800 FAX

www.powerwave.com

About Powerwave Technologies

A global leader in end-to-end wireless coverage and capacity solutions, Powerwave Technologies, Inc. offers cutting edge wireless infrastructure to address the demands of enterprise and commercial customers. Powerwave offers a comprehensive suite of solutions, including Antennas, Base Station Solutions and Coverage Solutions. Powerwave’s product line supports all wireless network protocols and frequencies including Next Generation Networks in 4G technology such as WiMAX™ and LTE®. Powerwave solutions, products and services also help wireless operators and OEMs reduce capital and operating expenses, speed rollout of services, improve coverage and capacity, and reduce environmental impact. For more information, visit us at www.powerwave.com.

© Copyright 2010, Powerwave Technologies, Inc. All rights reserved. Powerwave, Powerwave Technologies, the Powerwave logo, Allgon, In-Hancer and Tap-In are registered trademarks of Powerwave Technologies, Inc. Clean Site, Connecting the Wireless World, Intellimast, InView Management System, LinkNet, MicroFlex, NetOne, NetWay, NetworkOne, Nexus, Performance Boost, PowerBoost, RapidFlex, SubTerra and VersaFlex are trademarks of Powerwave Technologies, Inc. LTE is a registered trademark of European Telecommunications Standards Institute. Other trademarks referenced are the property of their respective owners. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.