The hexagonal lattice will be arranged in a way so that a six faced nozzle/module will be used to combine all the six extended vertical sides of the hexagon steel frame at a centre point, forming a hexagonal pyramid form. The sides will be soldered into the nozzle o�-site as part of prefabrica-tion, also each of the hexagonal structures will be soldered together forming a lattice network o�-site, and transported onto site in parts and soldered on site to complete the lattice. The lattice will be joined to the wall frame structure using 'plug-in and screw' system and will be bolted and assembled on site.

The glass curtain wall will be supported through an internal steel frame structure of the building, in form of load bearing support pillars. These pillars will be made from a steel frame structure and will be cladded with golden copper faces, similar to the ceiling. Above is a graphical representation of how the support pillars will look like. These pillars will extend from the ceiling in a as a hexagonal structure in a similar way to the hexagonal pyramids.

The steel frame of the wall is bolted to the steel frame of the wall

The lattice will sit on top of steel framed pillars, cladded in golden copper, anodised for rust prevention.

Paper construction model BUIL1166: Introduction to Building Environments and Construction2013/2014Course Leader: Dr. Shaun Murray!SARIA SAEED

450mm