Operator's Manual

CRAFTSMRN2.0 cu.in./33cc 2-CycleGASOLINE CHAIN SAW

ModelNo.358.351340 - 14 in. Bar

@

WARNING:i_ Read and Safety Rul..es Operatingfollowall and

Instructionsbefore firstuse of this product.

For answers to your questionsabout this product:Call 7 am-7 pm, Mon-Sat; Sun, 10 am-7 pm• 1-800-235-5878

Sea_,-Roebuck and Co., Hoffman Estates, IL 60179 USA

530-08761706/08/98

Storage ,Trouble Shooting Chart:_ 5 Parts Ust

Spanish 2_11 Parts & Ordering Back.....

SenncjLand Adjl]stments_ 14

1617

FULL ONE YEAR WARRANTY ON CRAFTSMAN ® GASCHAII_,'SAW I i i ;.For one y_earfrom_thede, of purchase, when this Craftsman Gas Chain Saw ismamteined, I,ul_.dcatedlanditur_dup accoro_,ng to the owner's manual, Sears will

ofchame,py inmatan-'orwor ansh p.This warranty_exclude_the;bar, chain, sp.arkplug and air tilter, which amexpendable p._rts,_andbecomelwom dunng normal use.

If this Gad Chain Saw is used for commercial or rental purposes, this warrantyapplies for 30'days from the date of purchase.WARRANTY SERVICE IS AVAILABLE BY RETURNING THIS CHAIN SAW TOTHE NEAREST SEARS SERVICE CENTER IN THE UNITED STATES.

This warranty gives you specific legal fights, and you may also have other dghtswhich vary from state to state.Sears, Roebuck end Co., D/817 WA, Hoffman Estetds, !L 60179

WARNING: Always disconnect sparkplug wire when making repairs exceptfor carburetor adjustments. Because achain saw is a high-speed woodcuttingtool, careless or improper use of thistool can cause serious injury.

PLAN AHEAD• Restrict the use of your saw to adult

users who understand and can followthe safety rules, precautions, and op-

_'e_ating instructionsfound inthismanual.

Hearing _ _._ SafetyHatProtection_ I _ Eye

i=,or,,--- ProtectionSnug .HeavyDuty

Clothingf Gloves

dNIm

_,_Vear protective gear. Always usesteel-toed safety footwear with non-slip soles; snug-fittingclothing;heavy.

duty, non-slip gloves; eye protectionsuch as non-fogging, vented gogglesor face screen; an approved safetyhard hat; and sound barriers (earplugs or mufflers) to protect yourhearing. Regular users should havehearing checked regularly as chainsaw noise can damage headng. Se-cure hair above shoulder length.

• Keep all parts of your body away fromthe chain when the engine is running.

• Keep children, bystanders, and ani-mals at least 30 feet (10 meters)away from the work area when start-ing and usingthe saw.

• Do not handle or operate a chain sawwhen you am fatigued, ill, or upset, orIf you have taken alcohol, drugs, ormedication. You must be in goodphysicalcond'_ionand mentally alert.If you have any condition that mightbe aggravated by strenuous work,check with doctor before ope.rating,

• Do not start cutting until you have adear work area, secure footing, andespecially if you are felling a tree, aretreat path.

2

OPERATE YOUR SAW SAFELY• Do not operate with one hand. Seri-

ous injury to the operator, helpers, orbystanders may resultfrom one-handed operation. A chain saw is in-tended for two-handed use.

• Operate the chain saw only in-a well_• ventilated outdoor area.• Do not operate saw from a ladder or

in a tree, unless you are specifically• trained to do so.

• Make sure the chain will not makecontact with any object while startingthe engine. Never try to start the sawwhen the guide bar is in a cut.

• Do not put pressure on the saw, es-Pecially at the end of the cut. Doingso can cause you to lose controlwhen the cut is completed.

• Stop engine before setting saw down.• Hand carry saw only when engine is

stopped.Carry with muffler away frombody; guide bar & chain projecting be-hind you; guide bar preferably cov-ered w,th a scabbard.

• Store the unit and fuel in a cool, drywell ventilated space where fuel va-porscannot reach sparks or openflames from water heaters, electricmotors or switches, furnaces, etc.

GUARD AGAINST KICKBACK

Follow all safety roles to help avoidkickback and other forces whichcanresult in sedous injury.

AvoldO_

Clear The Working Area

WARNING: Rotational Kickback canoccur when the moving chain contactsan object at the upper portion of the tip

MAINTAIN YOUR SAW IN GOOD ofthe guide bar.Contactatthe upperWORKING ORDER• Have all chain saw service Performed

by a qualified service dealer exceptthe items listed in the maintenancesection of this manual.

• Make certain the saw chain stopsmoving when the throttle trigger is re-leased. For correction, refer to "Car-buretor Adjustments."

• Keep _e handles, dry, clean, and freefrom od or fuel mixture.

• Keep caps and fasteners securelytightened.

• Use only Craftsman accessories andreplacej_ant parts as recommended.Never modify your saw.

portion of the/tip of the guide bar cancause the ctiain'to dig into the object,which stopsthe ch_,n for an instant. Theresult is a lightningfast, reverse reactionwhich kicks the guide bar up and backtoward the operator.Pinch-Kickback and Pull-In occur whenthe chain is suddenly stopped by beingpinched, caught, or by contacting a for-eign object in the wood. This suddenstopping of the chain results in a rever-sal of the chain force used to cut woodand causes the saw to move In the op-posite direction of the chain rotation.Pinch-Kickback drives the saw stndghtback toward the operator. Pull-In pulisthe saw away from the operator.

REDUCE THE CHANCE OFKICKBACK

fueling site before starting., rocks, fences, stumps, etc. Eliminate• Turn the-engine off and let _aw cool in or avoid any obstructionthat your saw

a non-oombuatible area, not on dry chain co_J_dhit while cutting.leaves, straw, paper, etc. Slowly re- • Kee_)saw chain sharp andpropedymove fuel cap and refuel uniL tans,oned. A loose or dullchain can

HANDLE FUEL WITH CAI_I'ION_• Do not smoke while handling fuel or

while operating the saw.• . or=ma •

in aress where fuel is mixedor poursd. VT_ a basic cnde_am_you san re.ca the e_. _t. ofscrpr_e

"- Mix and Peur fuai in an outdoor arsa which _ tc _

and use an approved, marked con- • Never let the moving chain con...tectteiner for all fuel purposes. Wipe up • any object at the tip Of the guide bar.all fuel spills before starting saw. Keep woddng area free from obstnx>

• Move at least 10 feet (3 meters) from tons such as other trees, branches,

incmaeethechanceof kickback.Fol- keepyour body.from I_.ing in a directlow man.utactumr's chain sharpening line with.the cutting chron.and maintenance instructions.Check • Stand with your weight evenly bai-tension at regular intervals, but never anced on both feet.with engine mnnlng. Make sure bar • Do not overreach. You could be drawnclamp nuts am eecurel..y,tightened, or thrown offbalance and lose conVol.

• Begin and continue cuttin_lat full • Do not cut above shoulder height. It issp_:l, ff the ct3a,nis.m0_g at a difficultto maintain control of sawslower speed, _here is greater chance above shoulder height.of Idcld0ackoccu_ng. KICKBACK SAFETY FEATURES

• Use extreme caution when reentering WARNING: The following features area out.• Do not attempt cuts startingwith the

tip of the bar(plunge cuts).• Watch for shiftinglogs or Otherforces

that could close a cut and pinch or fallinto chain.

• Use the specified Reduced-KickbackGuide Bar end Low-WackbackChain.

Avoid Plnch-K]okbaok:• Be extremely aware of situations or

obstructions that can cause matedaito pinch the top of or otherwise stopthe chain.

* Do not cut more than one log at atime.

• Do not twist saw as bar is withdrawnfrom an undercut when bucking.

Avoid Pull-In:

i lways begin cutting with the engineat ful/speed and the saw housingagainst wood.Use wedges made of plastic or wood.Never use metal to hold the cut open.

MAINTAIN CONTROL

Stand to the left of the saw

Thumbon \_

. o ,wlocked

Neverreversehandposltlons .• A good, firm gdp on the saw with b.oth

hands will help,y_., maintain control.Don't let go. Gdp the mar handle w_.your dght hand whether you are dgmor left handed. Wrap the fingers ofyour left hand over and around thefront handlebar, and your left thumbunder the front handlebar. Keep yourleftarm straight with the elbow locked.

• Position your left hand on the front-handlebar so it is in a streight line with

your right hand on the rear handlewhen making bucking cuts. Standslightlyto the left side of the saw to

included on your saw to help reducehazard of kickback; however, such fea-tures will not totally eliminate this dan-ger. Do not rely only on safety devices.• Handguard: designed to reduce the

chance of your left hand contactingthe chain if your hand slips off thefront handlebar.

• Position of front and rear handlebars:dask3nedw'dh.,distance between han-dles and "in-l,ne"with each other. Thespread and "in-line" position of thehands prowded by this design worktogether to give balance and res,s-tance in controlling the pivot of thesaw back toward the operator if kick-back occurs,

• Reduced-W_kback Guide Bar: de-signed with a small radius tip whichreduces the size of the kickback dan-_er zone. This type b.arhas been

emonsb'eted to significantly reducethe number and eenousness of kick-backs when tested In accordance withANSI B175.1.

_.__ SmallRadius

TipGuide Bar

TipGuide Bar

• Low-I_ckback Chain: has met Idckbackperformance .r_uirernents when testedon a representalivesample of chainsaws below 3.8 cubic InchdisplacementspecifiedIn ANSI B175.1. "

Low-KickbackChain

ContouredDepthGauge

.. ongatedGuardUnk

DeflectsK]ddoackForceAndAllowsWoodToGmdua_yRldeIntoCutter

S.AF_Y. NOTICE: Exposure tovibreUons through prolonged use ofgasoline power_:l hand tools couldcause blood vessel or nerve damage inthe fingem, hands, and joints of people4

prone to dmulation di,_.rders.or .abnormal swelling. Prol.o.ngea use in .cold weather has been linked to blcoa

vessel damege in otherwise h .salthypeople. If symptoms occur sucn asnumbn .e:ss,pmn, loss of strengm,change in skin color or t.e'4u.m, or I.o_.-of feeling in the fingers, nanas, or joims,

"discontinue the use of this tool andseek medical attention. Ananti-vibration system does not

• guarantee the avoidance of theseproblems Users who operate powertools on a continual andregular barbmust closely monitor their physicalconditionand the condition of this tool.CHAIN BRAKE If this saw is to be usedfor commercial logging, you must orderand installa chain brake to comply withFederal OSHA Regulations for Com-mercial Logging. Contact your SearsService Center or call 1-800-235-5878.SPARK ARRESTOR: Your saw isequipped with a temperature limiting

mufflerand spark8rrastingscreenwhichmeetsthe requirementsofCalifomlaCodes4442 and 4443. AllU.S. forest land and the states ofCalifornia, Idaho, Maine, Minnesota,New Jersey, Oregon, and Washingtonrequire by.law that many int.emalcombustion engines be equipped with aspark arrestor screen. If you operate achain sew in a state or locale wheresuch regulations exist, you are legallyresponsible for maintaining theoperating condition of these parts.Failure to do so is a violation of the law.Refer to Customer Responsibilitieschart in the MAINTENANCEsection.STANDARDS: This chain saw is listedby Underwriters Labomtorias, Inc. inaccordance with American NationalStandards for Gasoline-Powered ChainSaws Safety Requirements (ANSIB175.1-1991).

CARTON CONTENTSCheck carton contents against the fol-lowing list.Model 358.351340• Chain Saw (fully assembled)• Bar tool

• 2-cycle eng!ne oil(Bar oil not ,ncluded)

• Examine parts for damage Do notuse damaged pads

• If you need assistance or find thatpads are missing or damaged, pleasecall 1-800-235-5878

NOTE: It is n9rmai to hear the fuel filterrattle in an empty fuel tank.

Your unit has been factory tested andthe carburetor precisely adjusted. As aresult you may smell gasoline or find adrop of oil/fuai residue on the mufflerwhen you unpack the unit.

ASSEMBLY

Your saw is fully assembled; noassembly is necessary.

KNOW YOUR SAWREADTHIS OPERATOR'SMANUALAND SAFETY RULES BEFOREOPERAT-ING YOUR CHAIN SAW. Compare the illustrationswith your unit to familiarizeyourseffwith tb_ location of the various controls and adjustments. Save thismanual for futu_ reference. ,

BarTool FrontHandle

_=_===_ StsrterRopeON/STOP

Chain Muffler

Bar Oil RII Cap Housing

Cylinder CoverFast Idle

Lockout Adjusting,Screw

RearHandle

PrimerBulb

Fuel Mix RII Cap

ChainDirectionof Travel

ThrottJe Choke Chain Bar Clamp Nuts Guide BarTrigger Knob Bar Clamp _er

ON/STOP SWITCHThe ON/STOP Switch is used to stop• e engine.THROTrLE TRIGGERThe throttle trigg-_rcbntrols enginespeed.THROTTLE LOCKOUTThe throttle lockout must be pressedbefore you can squeeze the throttle rig-ger. This feature prevents you from ac-cidentaily squeezing the rigger.

FAST IDLE LOCK

The.fast idle lock holds the throttie tdg-ger in the starting position.Activate the.fastIdle lock by preying the throttle|oekout and squeezJng the throttle rig-ger, Wlth the _rottie rigger squeezed.press the fast idle lock. Release the

throffie lockout and rigger while holdingthe fast idle lock button.

CHOKE KNOBThe Choke Knob activates the choke toprovide additional fuel to the enginedudng cold starting.

PRIMER BULBThe Pdmer Bulb circulates fuel to thecarburetor to provide quicker starting.

CHAIN TENSIONIt ts normal for a new chain to stretchdudng first30 minutes of operation. Youshould check your chain tension fm-quentty.See Chain Tension under theService and Adjustments section.

6

BEFORE STARTING ENGINEWARNING: Besureto readthefuelhandlinginformationin thesafetyrulessectionof this manuel before you begin.If you do not understand _e fuel han-

. dlinginformationde not attempt to fuel.your unit. Seek help from someone thatdoes understand the informationor callthe customerassistance help line at1-800-235-5878.

GUIDE BAR AND CHAIN OILThe chain oiler providescontinuouslu-bricationto the chain and guide bar. Besure to fiHthe bar oiltank when you fillthe fuel tank (Capacity = 6.8 ft. oz.).For maximum guide bar and chain life,we .recommend.y.ou.use Craftsmanchain saw bar o,L If Craftsman bar oil isnot available, you may use a goodgrade SAE 30 oil untilyou are able toobtain Craftsman brand. The oil outputis autornaticailymetered during opera-tion. Yours_w will use approximatelyone tank of bar oil for every tank of fuelmix. Always fill the bar oil tank whenyoutill the fuel tank.

FUEUNG ENGINEThis engine is certified to operate onunleaded gasoline. Before operation,gasoline must be mixed with a goodquality2-cycle air-cooled engine oil. Werecommend Craftsman brand oH.Mixgasoline and oil at a ratio of 40:1 (A40:1 ratio is.obtai.'nedby mixing3.2ounces of o,I with I gallon of unleadedgasoline). DO NOTUSE automotive oilor boat oil. These oilswill cause enginedamage. When. mbdngfuel followtheinstru_'o_nspnnted on the co._ner.Once _>rb-,_dded to the gasoline,shake container momantejily to assurethat the fuel is thoroughly _Always read and follow the safety rulesrelatingto fuel before fueling your unit.

IMPORTANT_3de_ indcmes that aicohol blended

methanoi)sanat_actmoisturewhich

,nesand_,_ator arees_ty.Usa_fuel next season. Sce STORAGEins_nx>tions for addilion_ information.Never use engine or carburetorcleanerproducts inthe fuel tank or permanentdamage may occur.Bee the STORAGEsaotion for additionaiinformation.

STOPPING YOUR ENGINE,• Move On/Stop switchto STOR'• If sogine does not atop, pullchoke

knobout fully.

STARTING YOUR ENGINE

COLD ENGINE OR WARM ENGINEAFTER RUNNING OUT OF FUEL• Fuel engine with40:.1fuel mix.• R]I ber oil tenk with ber oil.• Move On/Stop switchto ON.

Primer Bulb

g _/-',,_,/ CHOKEPosmoNs

• Actuate choke by pullingchoke keob.fullyout.

• • Primaengine by slowly pressingpdrn-er bulb six times.

• Set saw on the ground.Grip fronthandle withyour left hand and placerightfoot throughmar handle.

StarterRopeHandis

LeftHandonFrootHandle

FootTtw_ RearHancne• Betlestidk)bycispms_=gthemrotUe

iseds to eml:_nlionand tormaiion of Iocl_with )_Jr right _ _,acUsdungaior_e._ geecan sque.eze..andhoUthrot,eV_gur.W_hdamamthefu¢symmofanenCneToV_'_ , your mume, pinesthe faat idle lockdown and hoid.Ne:d, ndeese theTo Fppe.. sys- t ome ger._ns_x_.beeml__ befomstm'agefur • DoNOTsqueszethmt_tflggerdur30 days or k_lger. Dram tbe ges tenk, .. ing atartlng; atherwlsa, it will be nso-sta_ the engine sod bt it ron ur_l the fuel e_W te mest the fast Idk) lock.

NOTE:Whenpullingthestarterrope,do notusethe fullextentof therope.Donotletstarterropesnapback.Holdhandle.Let roperewindslowly.• Pull starter rope handle firmlyand

quickly with yourdght hand untiltheengine attempts to start, but no morethan 5 polls."Fherk pushln Chokeknobfully. Resume pollinghandle un-til engine starts,

• Above 40°F, allow engine to runforapproximately5 seconds.Thensqueezeand releasethrottletdggerto

OPERATING TIPS• Check Chain tension before firstuse

and after,1 minuteof opereticn. SeeChain Tensionin the Maintenancesection.

• Cut wood only. Donot cut metal, plas-tics, masonry, non--woodbuildingma,_,-

• tedals, etc.• Stop the saw if the chain strikes a for-

eign object. Inspect the saw andre-pair parts as necessary.

• Keep the chain out of dirt and sand.Even a small amount of dirtwill quick-

allow engine to Idle. ly dull a chain and Increase the possl-• Below40°F, allow engine to warm up bllityof kickback.

for 30 seconds to I minutewith Choke • Practice cutting a few small logs usingat parital position.Push choke knob in the followingsteps. This will help youto the OFF position;then squeeze end get the "feel"of usingyoursaw beforerelease throttletrigger to allow engine you begin a major sawing operation.

to idle. lowthe engine to reaChfull speed• To stop engine, move On/Stop switch • Squeeze the throttle rigger and al-to the STOP position, before cutting.

STARTING A WARM ENGINEDO NOTuse the Choke to start a warmengine or flooding and hardstartingmay occur.• Move On/Stop switch to ON.• Set fast idle lock.• Be sure choke b Inthe OFF position.

•• W.ithsaw on ground, gdpfront handlewith lefthand and place your rightfootthroughrear handle.

• Pullstarter rope handle untllenginestarts.

• Squeeze and release throttle tdggerto rstum engine to idle apsed.

DIFFICULT STARTING ORSTARTING A FLOODED ENGINEThe engine may be flooded if it has notstarted after 10 pulls. Rooded enginescan be cleared of excess fuel with thefollovAngprocedure:

_,-Engage the fast Idle lock.• Verify that the On/Stop switchis in the

ON position. - :• Push choke knob to the OFF position.

• WR..hsaw on ground, grip fronthandlewith left hand and place dgM footthroughrearhandle.

• Pullstarterropehandleuntilenginestads.

• Startingcould require many pugsde-pending on how badly the unitisflooded. If engine stillfails to start, re-fer to the TROUBLESHOOTINGchart orcall 1-800-235-5878.

Begin cuttingwith the saw frameagainst the log.Keep the engine at full speed theentire time you are cutting.

• Allowthe chainto cut for you. Exertonly light _lownward pressure.

• Release'the_throttlerigger as soonas the cut Is completed, allowingtheengine to Idle. If you runthe saw atfullthrottle withouta cuffingload,unnecessary wear can occur.

• To avoid losingcontrolwhen cut iscomplete, do not put pressure onsaw at end of cut.

• Stop enginebefore settingsaw down.TREE FELLING TECHNIQUESWARNING: Check for broken or deadbranches which can fail while curlingcausingeedous injury. Do not cut nearbulldlngsor electrical wires if you do notknow the directionof tree fall, nor cut atnight since youwig not be able to seewell, nor duflng bad weather such asrein, snow, or strong winds, etc.• Carefully pten yoursawing operation

in advance.• Ctsar the work area. Youneed a clear

area all around the tree so you canhavesecureleo'ring.

• Studythenaturalconditionsthatcancausethetreeto fall In a particulardirection.These conditionsInclude:• The wind direction and speed.• The lean of the tree. The lean of a

tree might not be apparent due touneven or slopingterrain, use a

8

plumbor levelto determinethe di-rectionof tree lean.

: Weightand brancheson oneside.Surroundingtreesandobstacles.

• Lookfor decayand roL If the trunk isrotted, it can snap and fail toward theoperator. -_ .......

• • Make sure there is enough room for- the tree to fail Maintain a distance of

Dwill help prevent the treein the wrong direction.

Hingeholds_ee on

ab_td,_fv_'inches higher than the can- or hung in a log, don't try to force it out.tar of the notch. This will leave You can lose control of the saw result-enough uncut wood between the fell- ing in injury end/or damage to the saw.ing cut andthe notch to form a hinge. Stop the saw, drive a wedge of plastic

Rnalcuthere : Cut only one logat a time.Rrst! ._r / _- Cut shattered wood very carefully;,

-,_ ! ,-,,- sharp pieces of wood couldbe flung

_._. toward aperator.

4Notch_ ...... r • Use a sawhorse to cut smail

Never allow another person tl°ghhoid_v._ /...__, the log whiis cutting and never hold" S ge the log with your leg or fool

__..,. _,_ • Do not _ut inan area where logs,limbs, and rootsare langbd. Drag logs

• After removing the wood, make the into a clear area before curlingtilem.felling cut on the opposite side of the BUCKING TECHNIQUESnotch.This is done by maldng a cut WARNING: If saw becomes pinched

2-1/2 trea lengths from the nearest.person or other objects. Engine norse

can drown out a warning call. NOTE: .Beforefailing cut is complete,• Remove dirt, stones, loose bark, use weagea to open the cut when

nails, staples, and wire from the tree necaesanj to control the dirocdon of fail.where cuts are to be made. To avoid .kJcid_ckend chain damage,

treat use _ or p.la_c wedges, but neverPlana clearm path steel or iron weages.

• Be alert to sigr_ that the tree is ready

to fall:cracking sounds, wk_..ningof_,--_- --,ill_- Directionof Fall the felling cut, or movement znthe up

_// per branches.• As tree starts to fail, stap saw, putit

down, and get away quickly on yourplanned retreat pa..th. .

FELLING LARGE TREES • Be extremely cautious with partially(6 inches in diameter or larger) fallen trees that may be poorly sup-The notch method is used to fell large ported. When a tree doesn't fall corn-trees. A notch is cut on the side of the pletely, eat the saw aside and pulltree inthe desired direction of fall. After down the tree Witha cable winch,a felling cut is made on the opposite block end tackle, or tractor. Do notside of tree, the tree will tend to fall in use your sew to cut down a partiallythe direction of the notch, fallen tree.

NOTE: If tree has large buttress roots, cu'n'ING A FALLEN TREEremove them before making the notch. (BUCKING)NOTCH CUT AND FELMNG TREE Bucking ksthe term used for cutting a• Make notch cut by cutting the top of fallen tree to the desired log size.

the notch first.Cut through 1/3 of the WARNING: Do not stand on the logdiameter of the tree. Next complete .beingcuL ..Anyportion can roll causingthe notch by cutting the bottom. See loss of footing and control. Do not standillustration.Once the notch is cut, re- downhill of the logbeing cut.move _e_wedge of wood from tree. IMPORTANT POINTS

orwcodintothecutunt_thesew cen ber_ I'ly. REtitlt | lnd carefullymanterthem_. Do not_ a met_w_e. Do n_ at_.__ mmrt yoursew whan it b pinchedor hung in a log.

Use a wedgeto removepinchedsaw

Turn ssw OFF and usa a piastlc orwooden wedge to force cut open.

Overcutting begins on the top side ofthe log with the bottom of the sawagainst the log. When overcutling uselightdownward pressure.

OvercutUng Undercutting

Undercutting involves cutting on theunderside of the log with top of sawagainst the log. When undercutting uselight upward pressure. Hold saw firmlyand maintain control. The saw will tendto push back toward you.

WARNING: Never turn saw upsidedown to undercut. The saw cannot becontrolled in this position.

Always make your first cut on thecompression s:de of the log.

Rrst cut on com_sslon side of logI _ -- .-

_ # Secondcut

Rrstcuton compressionsideof log

BUCKING WITHOUT A SUPPORT• Overout through 1/3of the diameter of

the log.• Roll the log over and finishwith a sec-

ond overcut.-Watch for logs with a compreslonside. See illustrationabove for cuttinglogs with a compression side.

U@ngs logfor support 2_ Cut

Io,

_t= Cut

1stCut

BUCKING USING A LOG ORSUPPORT STAND• Remember your first cut is always on

the compression side of the log. (Re-fer to the iilustratlonbelow for yourfirst and second cut).

• Yourfirst cut should extend 1/3 of thediameter of the log.

• Finish with your second cut.

uslog c=L .,, . .

-_1 stCut

2n cut

LIMBING AND PRUNING

WARNING: Never climb into a tree tolimb or prune. Do not stand on ladders,platforms, a log, or in any positionwhich can cause you to lose your bal-ance or control of the saw.IMPORTANT POINTS• Watch out for spdngpoles.

Spdngpolss m small size limbswhich can wh:p toward you, or pullyou off balance. Use extreme cautionwhen cuttingsmall size limbs.

• Be alert for spdngback. Watch out forbranches that am bent or under pres-sure. Avoid being struck by thebranch orthe saw when the tension inthe wood fibers is released.

• Frequently clear branches out of theway to avoid tripping over them.

10

LIMBING branchesarehigherthanyourshoul-• Limb a tree only after it is cut down. der. Get a professionalto do the job.• Leave the larger limbs underneath the • Make your first cut 1/3 of the way

felled tree to support the tree as you through the bottom of the limb.work.

• Startat the base of the felledtree andwork toward the top, curing brar_asand limbs. Remove small limbswithone cut.

• Keep the tree between you and thechain.

• Remove larger, sup.portingbrancheswith the 1/3,2/3 cutt,ng techniques de-scdbed in the bucking section.

• Always use an ovemut to cut smalland freely hanging limba. Undercut-ting could cause limbs to fail andpinch the saw.

PRUNING

WARNING: Limit pruning to limbsshoulder height or below. Donot cut if

• Next make a second cut all the waythrough the limb.

• Rnish the pruning operation by usingan overcut.so that the etump of thelimb protrudes I to 2 inches from thetrunk of the tree.

cutlto21n.fromtrunkof trse

CUSTOMER RESPONSIBILITIES

Fill in dates as you complete Before After Ever_ Every Yea_regular service Use Use 5 hm 25 hrs.

Check for damaged/worn parts _,

Check for loose fasteners/parts p,

Check chain tension

Check chain sharpness p-

Check guide bar _,

Clean unit & labels _,

Clean air filter _.

Clean/inspsct spark arrestorecrean_&jnspact muffler P"

Replace spark plug _,

Berv IDates ]

• GENERAL RECOMMENDATIONSThe warranty on this unit does not cov-er items that have been subjected tooperator abuse or negligence. To re-ceive full value from the warranty, theoperator must maintain unit as instruct-

run better and last longer.

WARNING: Disconnect the spark plugbefore performingmaintenance exceptfor carburetor adjustments.

LUBRICATION

ed in this manual. Various adjustments 1 Bar 2 Bar Oil _ Iwill need to be made padodlcaily to Sprocket FillCap /

propal_J maJnt_n your unJL _ _.,_

• Once a year, replace the Sl_rk plug,airtilteeeeeeeee_ment,and check guide barand chaJnfor wear. A new spark plug _'_and air f'dterelement assures proper 1 Usesprocketlubricationair-fuel mixture and helps your engine 2 UseCraftsmanchainsaw baroil

CHECK FOR DAMAGED ORWORN PARTSReplacementof damaged/wompadsshouldbe referredto yourSearsSer-viceCenter.NOTE:It is normalfor a smallamountof oil to appearunderthesawafteren-gine stops. Do no_confuse this with aleaking oil tank.• On/Stop Switch - Ensure On/Stop

switch functions properly by movingthe switch to the "Stop"position.Make sure engine stops; then restartengine and continue.

• Fuel Tank- Do not use saw if fueltank shows signs of damage or leaks.

• Oil Tank- Do not use saw if oil tankshows signs of damage or leaks.

CHECK FOR LOOSEFASTENERS AND PARTS• Bar Clamp Nut• Chain• Muffler• Cylinder Shield• Air Filter• Clutch Drum/Sprocket• Handle Screws• Vibration Mounts• Starter Housing• Handguard

CHECK CHAIN TENSION• Use the screwdriver end of the bar

tool to move chain around guide barto ensure kinks do not exist. Thechain should rotate freely.

Bar Clamp Nuts: Bar Tool

• Looser bar clamp nuts until they arefinger tight against the bar clamp.

• Turn adjusting screw until chain bare-ly touches the bottom of guide bar.

• Udngbarrod,rollchainaroundguidebar to ensureall linksare in bar groove.

• Lift up tip of guide bar to check forsag. Release tip of guide bar, thenturn adjusting screw until sag doesnot exist.

• While rifting tip of.guide bar, tightenbar clamp nuts with the bar tool.

,Torque to 10-15 ft-lbs.

• Use the screwdriver end of the bar

tool to move chain arou.nd..guidebar.• ff chain does not rotate, it is too tight.

Slightty loosen bar clamp nuts andloosen ch.=.'nby fuming the adjustingscrew. Rstighten bar clamp nuts.

• If chain is too loose, it will sag belowthe guide bar. DO NOT operate thesaw if the chain is loose.

CHECK CHAIN SHARPNESSA sharp chain,makes wood chips. Adull chain makes a sawdust powderand cuts slowly.

CHAIN SHARPENINGChain sharpening requires specialtools.You can purchasa sharpeningtoolsat Sears or go to a professionalchain sharpener.

CHECK GUIDE BARConditions which require guide barmaintenance:• Saw cuts to one side or at an angle.• Saw has to be forced through the cut.• Inadequate sup.plyof oil to bar/chain.Check the cond'itlonof guide bar eachtime chain is sharpened. A worn guidebar will damage the chain and makecutting diff'_cult.To maintain guide bar:.• Move On/Stop switch to "Stop."• Remove bar and chain from saw.• Clean all sawdust and any other

debrls from the guide bar groove andsprocket hole after each use.

12

• Add lubdcant to sprocket hole aftereach use.

• Burringof guide bar rails is a normalprocess Ofrail wear. Remove theseburrs with a flat file.

• When rail top is uneven, use a fiat fileto restore square edges4and sides;.

Rle EdgesandsidesSquars

WornGroove Con'ectGrooveReplace guide bar when the groove isworn, the guide bar is bent or c.ra_ed,or when excess he_ng or bumng ofthe rails occurs. If replacement is nec-essary, use only the guide bar specifiedfor your sew in the repair parts I'_ or onthe decal located on the chain sew.

CLEAN UNIT & LABELS• Clean _e unit using a damp cloth with

a mild detergent.• Wipe off unit with a clean dry cloth.CLEAN AIR FILTERA dirty air filter decreases the life andperformance of the engine end in-creases fuel consumption end harmfulemissions. Always clean your air filterafter 15 tanks of fuel or 5 hours of op-eration, whichever comes firsL Cleanmore frequently in dusty conditions. Aused air filter can never be completelycleaned. It is advisable to replace yourair filterwith a new one after every 50hours of operation, or annually, which-ever comes first. To clean filter.• Loosen 3 screws on cylinder cover.• Remove cylinder cover.• Remove air filter.• Clean the air filter using hot soapy

water. Rinse with clean cool water.Air dry.eomplately before reinstalling.

• Lightlyogair filter before installingtoimprove the efficiency of air:filter. Use2-cycla engine oil or motor oil (SAE30). Squeeze excess offfrom filter.

• Reinstall air filter.• Reinstall cylinder cover and 3 screws

(15-20 in-lbs.).CylinderCover

AirRlter Screws

INSPECT MUFFLER AND SPARKARRESTOR SCREENAs the unit is used, carbon depositsbuild up on the muffler end sped(arrestor screen, and must be removedto avoid creating a fire hazard or affect-ing engin_ performance.Replace the spark arrestor screen ifbreaks occur.

MufflerDlfft_)r

;crsen

MufflerCoverScrews

/

Body MufflerCover

CLEANING THE SPARKARRESTOR SCREENCleaning is rf)_luiredevery 25 hours ofoperation or annually, whichever comesf,rst.• Loosen end remove the 2 muffler cov-

er screws.• Remove the mufflercover (cover

snaps off muffler body).• Remove muffler diffuserand spark

arrestor screen assembly. Notice theorientationof these parts for reassern-bling.

• Clean the spark arrestor screen with awire brush. Replace screen if breaksare found.

• Replace any broken or cracked muf-fler pads.

• Reinstall diffuserend spark arrestorscreen assembly with round holesfacing up.

• Reinstall muffler cover end 2 screws(7-8

REPLACE SPARK PLUGThe sparkplug shouldbe replacedeach year to ensure the engine startseasier end runsbetter. Ignitiontiming isfixed and nonadjustable.• Loosen 3 screws on cylinder cover.• Remove the cylinder cover.• Pull off the spark plug booL• Remove spark plug from cylinder and

discard.

• ReplacewithChampionRCJ7Ysparkplugandtighten_ a 3/4 inch socketwrench (10-12 ft Ibe). Spark plug gapshould be .025 in.

: Re!nstallthesped(plugboot.Reinstallthe cylindercoverand3screws (15-20 irPIbs).

CyllnclerCover

SparkPlug

CHAIN REPLACEMENT

CAUTION: Wear pmteotive gloveswhen handling chain. The chain issharp and can cut you evan when it isnot moving,it is normalfor a new chalnto strstchdur-ingthe first 15 minutes of operation.Youshouldrscheckyour chain tsnsion fm-quentiyand adjust the chaintension asrequired.See Chain Tensionsection.• Move On/Stop switch to the Stop

position.• Replace the old chain when it be-

comes worn or damaged.• Use only the Low-Kickback replace-

ment chain specified in the repair• parts list.The correct replacement bar

and chain is also specified on a decallocated on the chain saw.

• See your Sears Service Center to re-place and sharpen individual cutterson your chain.

• Remove bar clamp nuts.• Remove bar clamp.• Remove the old chain.

BarClamp

BarClampNuts

• Tum adjusting screw on bar to movethe tensioning rack as far as it will gotoward the front of the bar.

• Slide the guide bar rearward until itstops against the sprocket.

• Carefully remove now chain frompackage. Hokl chain with the ddvelinks as shown.

Cutters Del)_ Gauge

DdveLinks• Place chain over and behind clutch.• Fd the bottom of the drive linksbe-

tween the teeth in the sprocket nose.• Rt chain drive linksinto bar groove.• Pull guide bar forward untilthe chain

is snug in the guide bar groove.• Install the bar clamp.• Installbar clamp nuts; finger tighten

only. Do not tighten any further at thispoint,

BarClampNuts

CHAIN ADJUSTMENTSee "Chain Tension"in Maintenancesection.

14

CLEAN FUEL FILTERTocleanfuelfilter,drainyourunit byrunningdryof fuel, removefuel cap/re-tainerassemblyfrom tank.Pullfilterfromtankandremovefromline.Cleanwithmilddetergentand rinse. Dry thor-oughly, reassemble ....

CARBURETOR ADJUSTMENT

WARNING: The chain will be movingduring most of this procedure. Wearyour protective equipment and observeall safety precautions. During the lowspeed mixture adjustment recheck idlespeed after each tum of the screw. Thechain must not move at idle speed.

Carburetor adjustment is c_ and ifdone improperly can permanently dam-age the engine as well as the carbure-tor. If you require further assistance orare unsure about performing this proce-dure, cell our customer assistance helpline at 1-800-235-5878.

Old fuel, a dirty air filter, dirty fuel filter,or flooding may give the impression ofan improperly adjusted carburetor.Check these conditions before adjust-ing the carburetor.The carburetor has been carefully sat atthe factory.Adjustments may be neces-sary if you notice any of the followingconditions:

Start motor, let it run for 3 minutes, andproceed tothe adjustment esc_on. Ifengine does not start, refer to tmuble-shooUngcha.,tor call 1-800-235-5878.If engine performance is acceptable atthe preset positionsand there is nochain movement at idle, no further ad-justment is necessary.

ADJUSTING PROCEDURE

Idle Spasd-TAllow engine to idle. Adjustspeed untilengine runswithout chain movement orstalling.• Turn clock'_.sa to increase engine

speed if engine stalls or dies.• Turn counterclockwiseto decrease

speed.No further adjustments are necessary ifchmn does not move at idle speed andif performance is satisfactory.

Low Speed Mixture-LAllow engine to idle. Then acceleratethe engine and note performance. If en-gine hesitates, bogs down, or smokesduring acceleration, tum mixture screwclockwise in 1/16-tum increments untilperformance.i_ satisfactory.Repeat thisprocedure as necessary for proper ad-justment. After completingcheck for acceleration and chainment at idle. Reset if necessary.

• Chain moves at idle. See "Idle Speed" High Speed Mixture-Hunder adjusting procedure.

• Saw will not idle. See "Idle Speed"and "LowSpeed Mixture"under ad-justingprocedure.

• Engine dies or hesitates when itshould accelerate. See "AccelerationCheck" under adjusting procedure.

• Loss of cutting power. See "HighSpeed_lixture H• under adjustingprocedure.

There are three adjustment screws onthe carburetor. They am labeled H, L,

" and T. They ere located in the area justabove the primer bulb.

CARBURETOR PRESETS+

When making adjustments, do not forcethe plastic limlter caps beyond thestops or damage will occur.if carburetor presets are not needed,proceed to "idle Spoed-T."• Turn both mixture screws cpunter-

d o¢inm-sauntilthey stop.• Tum'ffT_eidle speed screw clockwise

until it stops. Now tum counterclock-wise 4-1/2 full turns.

DO NOT operate engine at full throttlefor prolonged periods while making ad-justments. Damage to the engine canoccur. Make a test cut. Baesdon per-formance of the saw while cutting, ad-just the high speed mixture setting in1/16-turn increments as follows:• Clockwiseunti saw has good power in

the cutwilh nc hesitstion.Do nct adjustby orspesd, judgebyhowwell the saw peforms inthe cut.

• Counterclockwise if the saw hasspeed, but dies in the cut or lackspower in the cut.

After completing adjustments, check foracceleration and chain movement atidle. Reset if necessary.AcceleraUon Checkfftheang_nsdiesorhe,_tatssInstsadofsccaiereting,turnthelowspeedrnixtureedjustment counterdoclo,_seun_l youhave smoothsc_deretion with no chainmovementat Idle. Rschsck and edjust asnscesseryfor acceptableperformance.

Prepareyourunitfor storageatthe endoftheseasonor if it willnot beusedfor30daysormorn.WARNING:• Allowtheengineto c_ol,and secure

the unit before storing or transporlJng.• Store chain saw and fuel in a well

ventilated area where fuel vaporscannot reach sparks or open flamesfrom water heaters, electric motors orswitches, fumaces, etc.

• Store chain caw with all guards inplace and positionchain caw so thatany sharp object cannot accidentallycauseinjury.

• Store chain caw well out of the reachof children.

EXTERNAL SURFACESIf your chain caw Is to be stored for aperiod of time, clean it thoroughly be-fore storage. Store in a clean dry area.• Ughtly oil extemal metal surfaces and

guide bar.• Oil the chain and wrap it in heavy pa-

per or cloth.

FUEL SYSTEMUnder Fueling Engine in the OperatingSection of this manual, see messagelabeled IMPORTANTregarding the useof gasohol in your chain saw.Fuel stabilizer is an acceptable altema-

tive in minimizing the formation of fuelgum deposits during storage. Add stabi-lizer to the gasoline in the fuel tank orfuel storage container. Follow the mixinstructionsfound on stabilizer contain-ere. Run engine at least 5 minutes afteradding stabilizer.CRAFTSMAN 40:1, 2-cycle engine oil(air cool.eel..) is especially blended withfuel stabilizer. If you do not use thisSears oil, you can add a fuel stabilizerto your fuel tank.ENGINE• Remove spark plug and pour I tea-

spoon of 40:.1, 2-cycle engine oil (aircooled) through the spark plug open-ing. Slowly pull the starter rope 8 to10 times to distribute oH.

• Replace spark plug with new one ofrecommended type and heat range.

• Clean air filter.• Check entire unit for loose screws,

nuts, and bolts. Replace any dam-aged, broker), or wom parts.

• At the beginhlng of the next season,use only fresh fuel having the propergasoline to oil ratio.

OTHER• Do not store gasoline from one sea-

son to another.• Replace your gasoline can if it starts

to rust.

16

TROUBLE SHOOTING CHART

TROUBLE

Engine will notstart or will runonly a fewseconds afterstarting.

Enginewillnotidleproperly.

Engine will notaccelerate,lacks power,or dies undera load.

Engine smokesexcessively.

Enginerunshot.

Oil inadequatefor bar andchainlubrication.

CAUSE

• Ignition switch off.• Engine flooded.• Fuel tank empty.• Spark'_plugnot fldng.• Fuel not reaching

carburetor.

• Carburetor requiresadjustment.

• None of the above.

• Idle speed set too highor too low.

• Low Speed Mixturerequires adjustmenL

• Crankshaft seals wom.• Compression low.• None of the above.

• Air filter dirty.• Spark plug fouled.

• Carburetor requiresadjustment.

• Exhaust ports or muf-fler outlets plugged.

• Compression low.• None of the above.

• Choke partially on.• Fuel mixture incorrect.

• Air filter dirty.• High Spead Mixture

requires adjustment.• Crankcase leak.

• Fuel mixture incorrect.• Spark plug incorrect.• High Speed Mixture

set too lean.• Exhaust pods or muf-

fler outlets plugged.• Carbon b_ild-up on

muffler outlet screen.• Fan housing/cylinder

fins dirty.• None of the above.

• Oil tank empty.• Oil pump or oil filter

clogged.• Guide bar oil hole

blocked.

REMEDY

• Move Ign_on switch .toON.• See "Starling Instructions."• Ril tank with correct fuel mixture.

• Install new spark plug.Check for dirty fuel riper, replace.Check for Idnked or spilt fuel line;repair or replace.

• See "Carburetor Adjustments."

• Co[_actSearsService.• See "CarburetorAdjustments."

• See "Carburetor Adjustments."

• Contact Sears Service.• Contact Sears Service.• Contact Sears Service.

• Clean or replace air filter.• Clean or replace plug

and rsgsp.• See "Carburetor Adjustments."

• Conta_,Sears Service.

• Contact Sears Service.• Contact Sears Service.

• Adjust choke.• Empty fuel tank and refillwith

correct fuel mixture.• Clean or replace air filter.• See "Carburetor Adjustments."

• Contact Sears Service.

• See "FuelingYourUnit."• Replacewith correct plug.• See "CarburetorAdjustments."

• Contact Seers Service.

• Clean spark arrestor screen.

• Clean area.

• Contact Sears Service.

• RU oil tank.• Contact Sears Sen_',e.

• Remove bar and clean.

m e

17

TROUBLE SHOOTING CHART- ContinuedCAUSETROUBLE

Chain movesat idle speed.

Chain does _not movewhen engineis accelerated.

Chain dartersor cuts roughly.

Chain stopswithinthe cut.

Chain cuts atan angle.

• Idle speed requiresadjustment.

• Clutch requires repair.

_. Chain tQnslontootighL

• Carburetor requiresadjustment.

• Guide bar railspinched.

• Clutch slipping.

• Chain tension incorrect.• Cutters damaged.• Chain wom.• Cutters dull, Improperly

sharpened, or depthgauges too high.

• Sprocket worn.• Chain installed

backwards.

• Chain cutter tops notfiled fiat.

• Guide bar burred orbent; rails uneven.

• Clutch slipping

• Cutters damaged onone side.

• Chain dull on one side.• Guide bar bent or wom.

REMEDY

• See "Carburetor Adjustments.•

• Contact Sears Service.

• See "Chain Tension."

• See "Carburetor Adjustments."

• Repair or replace.

• Contact Sears Service.

• See "Chain Tension."• Contact Sears Service.• Resharpen or replace chain.• See "Sharpening Chain."

• Contact Sears Service.• Install chain in right direction.

• See =Sharpening Chain."

• Repair or replace guide bar./J

• Contact Sears Service.

• See "Sharpening Chain."

• See "Sharpening Chain."• Replace guide bar.

If situations occur which are not covered in this manual, use cars and goodjudgement. If you need assistance, contact Sears Service or the CUSTOMERASSISTANCEHELPLINEat 1-800-235-5878.

U. S. EPA/CALIFORNIA maintenance of your lawn and gardenequipment engine.

EMISSION CONTROL Your emission control system includesWARRANTY STATEMENT .p.artssuchesthecarburstorandtheigni-

tion system.Where a warrantable cond'dion exits,

YOUR WARRANTY RIGHTS AND SEARS will repairyour lawn and gardenequipment engine at no cost to you. Ex-

OBUGATIONS penses covered under warranty includeThe U. S. Environmental Protection dlagnoais, parts and labor.Agency/Califomia Air Resources Boardand SEARS, ROEBUCK AND CO., USA MANUFACTURER'S WARRANTYare pleased to explain the emissions COVERAGE--control system warranty on. your lawn If any emlsaions related part on your en-and garden equipment engine. All new gine (as listed under Emissions Controlutility and lawn and garden equipment Wananty Parts USt) is defective or a de-engines must be designed, built, and fect in the matedals or workmanship ofequipped to meet the stringent anti- the engine causes the fallurs of such ansmog standards. SEARS must w._ emission related part, the pert.will be rs-the emlsaioncontrol system onyour lawn paired or rsplaced by SEARS.

Zandgarden eguipment engine for the pe- iDWNER'SWARRANTY RESPON-flods of time I,sted below provided there SIBILrrlES --has been no abuse, neglect, or improper As the lawn and garden equipment en-

18

gineowner,youare responsiblefor the shallbewarrantedforthe periodperformanceof the requirea mainte_ oftimeup to the firstscheduled replace-nance listed in your Owner's Manual. ment point for that part.SEARS recommends that you retain all DIAGNOSIS - -receipts covering maintenance on yourlawn and garden equipment engine, but The owner shall not be charged for diag-SEARS cannot deny waoanty solely for nostic labor which leads to the deter-the lack of receipts or for'your failiJre to mination:th_ a warranted part

is defective if the diagnostic work is.pe,r-ensure the performance of all scheduled formed at an approved SEARS sennc0ngmaintenance.

As the lawn and garden equipment an- center. --gine owner, you should be aware that CONSEQUENTIAL DAMAGESSEARS may deny you warranty cover- SEARSmeybeliablefordamagestooth-age if your lawn and garden .equipmant er engine components seused bythe fail-engine or a part of it has taded due to ure of awarrantedpartstillunderwar-abuse, neglect, impr..opermaintenance, rarity.

unapproved modifications, or the use of WHAT IS NOT COVERED --parts not made or approved by the origi-nal equipment manufacturer. . All fadures caused by abuse, neglect, or

You are responsible for presenting your improper maintenance are not cover_ed_lawn and garden equipment engine to a ADD-ON OR MODIRED PARTSSEARS authorized ropaircenter assoon The use of add-on or modifiedparis canas a problem exists. Warranty repairs =be,._gro_bfor Q_sailowing a warrantyshould be completed in a reasonable _l_llfll. oP_/,_rloamount of time, notto exceed 30 days. is notliabletocoverfailures of warrantedIfyou have any questions regarding your parts caused bythe use of add-on ortoo-warranty rightsand responsibilities, you dified parts.should contact your nearest authorizedservice center or call SEARS at HOW TOFILEACLAIM--1-800-473-7247. Ifyou have an_ questions reqard!ngyour

warranty nghts and responsJbihties,.youWARRANTY COMMENCEMENT should contact your nearest authorizedDATE - -The warranty period begins on the datethe lawn and garden equipment engine ispurchased.

LENGTH OF COVERAGE --This warranty shall be for a period of twoyears from the initial date of purchase.

WHAT IS COVERED--REPAIR OR REPLACEMENT

OF PARTS--

service center or call SEARS at1-800-473-7247.WHERE TO GET WARRANTYSERVICE - -_ty servicesor rspalrsshallbe pro-

at all SEARS at 1-800-473-7247servicecenters.

MAINTENANCE, REPLACEMENTAND REPAIR OF EMISSION RE-LATIED PARTS--

Repak _ replacement of any warrantedpart willbe performed at no charge to theowner at an approved SEARS servicingcenter.

.. Ifyou have any quastions r_....!ng yourwarranty rightsand respons,billt,es, youshould contact your nearest authorizedservice center or call SEARS at EMISSION CONTROL WARRAN-

Any SEARS approved replacement partused in the performance of any warrantymaintenance or ropalr on emiselon re-lated parts will be provided withoutcharge to the owner if the part is underwarranty.

Any warranted part which is not sched-uledfor rep.k_ement as required mainte-nance orwhich is scheduled on=lyfor reg-ular inspection to the effect of "rapair orreplace-a= necessary" shall be war-ranted for 2 years. Anywarranted partwhich is scheduled for re-placement .as required maintenance

- 1-800-473-7247.

WARRANTY PERIOD --

TY PARTS LIST--I. Carburetor2. IgnitionSystem

a. SparkPlug,coveredup tomaintenanceschedule.

b. IgnitionModule --MAINTENANCE STATEMENTThe owneris responalblefor the perfor-mance of all requiredmaintenanceasdefinedintheowner'smanual.

REPAIR PARTS

6 7

1 $

9

13 143536 38

19 23 18 17

4845

2o" II

i43

31

i

2 15

41

I323334

5352

i

I

44

2642

21

5O

-- 51

S2

47

I49

Ref. Pml No.

I. 530069724

2. 530026119& 83OO378O0

-" 4:-. 5300378_5. 5300159176. 52O047'_97. S2O0_4068. 52o0we039. 53oo9418810.: 5300470_1

11.12,131A15161718192_21.22_

i

i 5300156115300149495300_2753001614953OO38264530015922530(_985053001581453OO159O771-361771-3659452O016920

Dm_ptJon Ref, Part N_

rdgger&LodmutKit 24. 530071259(Ind.d_Pin)_neckVah_ 26. 530010e46IN1n)- Throttle 28. 530016080

CO_t 29. 52o0100e4• Jt- B_ Mount'_9 2O. 62o01g_06ChokeLever 31. 5300494773mmm4F.Cllo_Knob 32. S2O0_373Chmmls_t 2O. 52O0_7_1_:h SlX_ _ SS002Olm

DrumA._'y- 35. 5,1001577536. 5300G9247

V_shet- ClutchClutchAIIs'),. 38. 530047192Sw_h Lev_Swlt_ Sprklg 40. 530016133

NP_ronzo Vent 41. 530047663ChainCatcher 42. 530016020Screw 43. 530016132Wuh_ - Thrust 44. 530015814Ct_n-14" 45. 53003782OBar-14" 46. 530019231Scmw 47. 530037799BarMour_g Plate 48. S,S00_4

iOI Pump_(Ind.2O,31& 45)

Screw;crewS_d B_x:kB)ow--OUP_Pick-UpOilerCdlRlterPtuo-.C_lR#erScrewFuell.kle_t

Fu_CapAshy.wn:tetalner

Bolt- Baro_a_m _.

ScrewScrews=ewWormGearSprY0DustS_dFrontHanole

Ref. Pml No.

49. 53001594050. 53003748551. _52. 52O0158g2.53. S2OO49336S4. 6300_r_3155. 53003781766. : 62O0_2O957. 53001512758. 530016134

Not Sho_

530067817530053818

20

De_dpUo.ScrewStarterHandleRo_K_ScrewFanHousln0Re_ s_n_StarterPu,oyFB_h_ As_y_WisherNut-Flywheel _.

OperatorManual•-Deca_--FmHo.s_

REPAIR PARTSI I I I I I I I I

2

29

14 12 13

41

18 27

3O _10 4O

192O

22 -------;- _

i34

25

36 37

I_S

Fief. Part No,

1.

2.

4.5.

53OO3116353OO3779353001610153OO378O4

6. 5300192397. 530015810& 53OO497OO9. 53001618710. 5300161(211. 53005318412. 5300_31813. 53003831714. 53004gQ4415. 530047213l& 53006_16

17. 53001609016. 71-8584919. 53001(24920. 53OO6993121. 530069604

--S ss°°_53001569724. 530047062

Dw.rlpUo.

BarWrench_r RlterNut_ F,terHousV,gCarburetor I_t(IncL12&13)

Carb. Gas,_

_ Pu_ _,.

(SmaUo_1

s_k P_uo(cJ-7"_Gu_,-Carb _torc,_Pbton 10t0rid.22&23)

PistonRrn0Retainer_ Pinc_.,_,_.

Rd. Pan No.

25. ,sso047_,26. 5300379_527. 53001613628. 53004744229. ,53006NW

30. 63005229631. 6300143E232. 53O(2765233. 53001gQ2134. 63004SIS7035. 530047207

36. 5300_781337. 5300861_38. 5300161(239. 6300_27740. 53001581441. 95270660642. 53004971443. 530049715

NCXSIWM1

s3ooee4_5,30o53834N

neea_lon

Cap-Crank=_CSpGro_ Su_oEn_ Guket_

Wire14_mmsAss_Fuel Pk:JuJpAu'y.Heat Insda_Muf_r GuketMu_ Back PImM.nler/_0nc_a.q-s4&_)

MUf_ O_fuwS_/Vm_ SueenScrew

SawChin 8ndce_Seel-ca_ _ 0.ov_SW,-Ca_/v_a_r (Upper)

DIc_-S_Dead-_ Qmp

zmmx:Uon

21

REPAIR PARTS

Ca_ AmmmblvKItNumb_ J_OOMrtl_

K]T*_

Krr

KIT

)m KIT*

6 2

Ref. PurrN_ De_dptlon

4.

&7.

53003831853003831753¢069626

53O069844

5300_3835300_845300_g35300_295

ummwCapH_hUm_ Cap-LowCatoure_Rop__

_r_m K_(,.comm)

Nee_-LowS_edN_I*-H_h SpeedNeodbS_npLowSpe_Need_S_-H_h S_d

22

REPAIR PARTS

23

or the repair or replacement parts you needelivered directly to your home;all 7 am - 7 pm, 7 days a weekL-800-366-PART1-800-366-7278)'ara ordenar piezas con entrega aomicilio- 1-800-659-7084

or in-house major brand repair serviceall 24 hours a day, '7 days a week-800-4-REPAIR1-800-473-7247)am pedir servicio de reparacidn aomicilio - 1-600-676-5811

RSBN_

'or the location of a Sears Parts andlepair Center in your area'all 24 hours a day, 7 days a week1-800-488-1222

Immmmmmmm

or information on purchasing a Searslaintenance Agreement or to inquirebout an existing Agreement;all 9 am - 5 pm, Monday-Saturday-800-827-6655

then requesting service or orderingarts, always provide the followingformation:

ProductType • Part NumberModeLNumber • Part Description

SF=4R$America_ RepairSpecialists