Notice EuroV Reprogrammation.ri

7/30/2019 Notice EuroV Reprogrammation.ri

1/23

INSTRUCTION MANUAL

Version: 1.0

Reprogramming module

The Renault electronic repair module instruction manuals are based on the technical specifications current when it wasprepared. They may be modified as a result of updates to the electronic repair modules introduced by the manufacturer.

Copying or translating, in part or in full, of this document is forbidden without the prior written consent of Renault s.a.s.

All rights reserved by Renault s.a.s.

Renault s.a.s. 2009

Page 1 / 23

1. INSTALLATION / UNINSTALLATION

1.1 Installation

Run the installation program:

If the module has not been installed, the following window appears:


2/23

INSTRUCTION MANUAL

Version: 1.0


Page 2 / 23

If the module is already installed, the following window appears:

Once the type of installation has been selected, accept the terms of the licence agreement:


3/23

INSTRUCTION MANUAL

Version: 1.0


Page 3 / 23

Wait during installation:

Installation is complete:

1.2 Uninstallation

Uninstall the module using the shortcut in the Start Menu:

Confirm uninstallation:

Wait during uninstallation:


4/23

INSTRUCTION MANUAL

Version: 1.0


Page 4 / 23

The module has been uninstalled:

2 REPROGRAMMING A COMPUTER

2.1 Start the moduleClick on the Desktop shortcut:

2.2 Module window

The Home button is used to exit the module:

The Back button is used to return to the previous screen:

The status bar is used to obtain information about the session in progress (if available):- version of the module in use- vehicle model- VIN

- type of computer


5/23

INSTRUCTION MANUAL

Version: 1.0


Page 5 / 23

2.3 Reprogramming

2.3.1 Home page

Click on the button "Effectuer une reprogrammation" ("Perform reprogramming")


6/23

INSTRUCTION MANUAL

Version: 1.0


Page 6 / 23

2.3.2 Pre-reprogramming instructions

Carefully read the instructions relating to the operations that must be carried out before reprogramming.Only if these operations have been carried out, select "Oprations de pr-reprogrammation effectues" ("Pre-reprogramming operations carried out").

Otherwise, select "Oprations de pr-reprogrammation non effectues" ("Pre-reprogramming operations notcarried out"). The following window appears.


7/23

INSTRUCTION MANUAL

Version: 1.0


Page 7 / 23

2.3.3 Module operating instructions

Carefully read the technical pre-requisites for use of the module. Click on "Valider" ("Confirm") if thesepre-requisites have been met.


8/23

INSTRUCTION MANUAL

Version: 1.0


Page 8 / 23

2.3.4 Selecting the computer

Enter the VIN, the vehicle model and the computer to reprogram in the relevant fields and then click on"Interrogation des calculateurs" ("Interrogation of computers")

2.3.4.1 Troubleshooting

If the VIN entered is incorrect, the following window is displayed:


9/23

INSTRUCTION MANUAL

Version: 1.0


Page 9 / 23

If no J2534 sensor is connected, the following window is displayed. The same error occurs ifseveral sensors are connected at the same time.

2.3.5 Interrogating the vehicle

Wait while the module interrogates the vehicle.


10/23

INSTRUCTION MANUAL

Version: 1.0


Page 10 / 23


The following messages are displayed:

If the VIN read on the vehicle is different to the VIN entered on the previous screen, the correct VINmust be selected manually:

If the vehicle does not have a VIN, use of the VIN entered on the previous screen must beconfirmed:

If the selected computer is not reprogrammable:

If it is impossible to communicate with the vehicle. Check that the sensor is working correctly.


11/23

INSTRUCTION MANUAL

Version: 1.0


Page 11 / 23

2.3.6 Downloading the reprogramming file

Click on "Suivant" ("Next") to continue.

The following window is displayed during interrogation of the Renault server.


12/23

INSTRUCTION MANUAL

Version: 1.0


Page 12 / 23

Select your personal certificate (if requested)

Enter your certificate password.


13/23

INSTRUCTION MANUAL

Version: 1.0


Page 13 / 23

Once the file is retrieved, click on "Suivant" ("Next").


14/23

INSTRUCTION MANUAL

Version: 1.0


Page 14 / 23


The following messages are displayed:

If the selected computer is up-to-date. Click on "Quittez l'application" ("Exit application")


15/23

INSTRUCTION MANUAL

Version: 1.0


Page 15 / 23

If the Renault server is unable to determine which file to use.Click on "Quittez l'application" ("Exit application")

Click on "Imprimer" ("Print") to print (Note: only if a printer is configured)


16/23

INSTRUCTION MANUAL

Version: 1.0


Page 16 / 23

If your InfoTech account has not been credited

If your vehicle cannot be treated by this module

If a certificate or server problem occurs

If your certificate is not connected to your computer

Click on "Abandonner" ("Abandon") if you do not have a certificate. The following messageis displayed. Click on "Quitter" ("Exit").

Click on "Suivant" ("Next") after having connected your certificate if you have one. Thefollowing message is displayed. Click on "OK".


17/23

INSTRUCTION MANUAL

Version: 1.0


Page 17 / 23

If communication with the Renault server is impossible:

Check that your workstation is configured correctly to access the Internet and that the Firewall is not preventingconnection to the Renault server.

Click on "Test connexion" ("Test connection") to try again. The following message is

displayed:

Click on "Annuler" ("Cancel") to abandon and exit.


18/23

INSTRUCTION MANUAL

Version: 1.0


Page 18 / 23

2.3.7 Running the reprogramming

Wait during the battery test.


19/23

INSTRUCTION MANUAL

Version: 1.0


Page 19 / 23

If the battery voltage is within the permissible range, reprogramming may be started by selecting"Reprogrammer" ("Reprogram").


20/23

INSTRUCTION MANUAL

Version: 1.0


Page 20 / 23

Wait until the end of the reprogramming procedure. Do not work on the vehicle during this operation.


21/23

INSTRUCTION MANUAL

Version: 1.0


Page 21 / 23

2.3.8 Post-reprogramming operations

Reprogramming is now complete. Carefully read the instructions relating to the operations that must becarried out after reprogramming.

Click on "Quittez pour effectuer les oprations de post-reprogrammation" ("Exit to carry out the post-reprogramming operations") and carry them out.


22/23

INSTRUCTION MANUAL

Version: 1.0


Page 22 / 23

3 HISTORY OF REPROGRAMMING PROCEDURES

3.1 Viewing the history

Click on "Consulter lhistorique des reprogrammations" ("View history of reprogramming procedures").


23/23

INSTRUCTION MANUAL

Version: 1.0


This screen is used to view all of the operations carried out using the moduleClick on "Prcdent" ("Previous") and "Suivant" ("Next") to navigate.

Click on "Retour" ("Back") to return to the home page screen.

Documents

Notice EuroV Reprogrammation.ri