7/30/2019 Notice EuroV Reprogrammation.ri
1/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
The Renault electronic repair module instruction manuals are based on the technical specifications current when it wasprepared. They may be modified as a result of updates to the electronic repair modules introduced by the manufacturer.
Copying or translating, in part or in full, of this document is forbidden without the prior written consent of Renault s.a.s.
All rights reserved by Renault s.a.s.
Renault s.a.s. 2009
Page 1 / 23
1. INSTALLATION / UNINSTALLATION
1.1 Installation
Run the installation program:
If the module has not been installed, the following window appears:
7/30/2019 Notice EuroV Reprogrammation.ri
2/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 2 / 23
If the module is already installed, the following window appears:
Once the type of installation has been selected, accept the terms of the licence agreement:
7/30/2019 Notice EuroV Reprogrammation.ri
3/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 3 / 23
Wait during installation:
Installation is complete:
1.2 Uninstallation
Uninstall the module using the shortcut in the Start Menu:
Confirm uninstallation:
Wait during uninstallation:
7/30/2019 Notice EuroV Reprogrammation.ri
4/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 4 / 23
The module has been uninstalled:
2 REPROGRAMMING A COMPUTER
2.1 Start the moduleClick on the Desktop shortcut:
2.2 Module window
The Home button is used to exit the module:
The Back button is used to return to the previous screen:
The status bar is used to obtain information about the session in progress (if available):- version of the module in use- vehicle model- VIN
- type of computer
7/30/2019 Notice EuroV Reprogrammation.ri
5/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 5 / 23
2.3 Reprogramming
2.3.1 Home page
Click on the button "Effectuer une reprogrammation" ("Perform reprogramming")
7/30/2019 Notice EuroV Reprogrammation.ri
6/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 6 / 23
2.3.2 Pre-reprogramming instructions
Carefully read the instructions relating to the operations that must be carried out before reprogramming.Only if these operations have been carried out, select "Oprations de pr-reprogrammation effectues" ("Pre-reprogramming operations carried out").
Otherwise, select "Oprations de pr-reprogrammation non effectues" ("Pre-reprogramming operations notcarried out"). The following window appears.
7/30/2019 Notice EuroV Reprogrammation.ri
7/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 7 / 23
2.3.3 Module operating instructions
Carefully read the technical pre-requisites for use of the module. Click on "Valider" ("Confirm") if thesepre-requisites have been met.
7/30/2019 Notice EuroV Reprogrammation.ri
8/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 8 / 23
2.3.4 Selecting the computer
Enter the VIN, the vehicle model and the computer to reprogram in the relevant fields and then click on"Interrogation des calculateurs" ("Interrogation of computers")
2.3.4.1 Troubleshooting
If the VIN entered is incorrect, the following window is displayed:
7/30/2019 Notice EuroV Reprogrammation.ri
9/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 9 / 23
If no J2534 sensor is connected, the following window is displayed. The same error occurs ifseveral sensors are connected at the same time.
2.3.5 Interrogating the vehicle
Wait while the module interrogates the vehicle.
7/30/2019 Notice EuroV Reprogrammation.ri
10/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 10 / 23
2.3.5.1 Troubleshooting
The following messages are displayed:
If the VIN read on the vehicle is different to the VIN entered on the previous screen, the correct VINmust be selected manually:
If the vehicle does not have a VIN, use of the VIN entered on the previous screen must beconfirmed:
If the selected computer is not reprogrammable:
If it is impossible to communicate with the vehicle. Check that the sensor is working correctly.
7/30/2019 Notice EuroV Reprogrammation.ri
11/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 11 / 23
2.3.6 Downloading the reprogramming file
Click on "Suivant" ("Next") to continue.
The following window is displayed during interrogation of the Renault server.
7/30/2019 Notice EuroV Reprogrammation.ri
12/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 12 / 23
Select your personal certificate (if requested)
Enter your certificate password.
7/30/2019 Notice EuroV Reprogrammation.ri
13/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 13 / 23
Once the file is retrieved, click on "Suivant" ("Next").
7/30/2019 Notice EuroV Reprogrammation.ri
14/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 14 / 23
2.3.6.1 Troubleshooting
The following messages are displayed:
If the selected computer is up-to-date. Click on "Quittez l'application" ("Exit application")
7/30/2019 Notice EuroV Reprogrammation.ri
15/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 15 / 23
If the Renault server is unable to determine which file to use.Click on "Quittez l'application" ("Exit application")
Click on "Imprimer" ("Print") to print (Note: only if a printer is configured)
7/30/2019 Notice EuroV Reprogrammation.ri
16/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 16 / 23
If your InfoTech account has not been credited
If your vehicle cannot be treated by this module
If a certificate or server problem occurs
If your certificate is not connected to your computer
Click on "Abandonner" ("Abandon") if you do not have a certificate. The following messageis displayed. Click on "Quitter" ("Exit").
Click on "Suivant" ("Next") after having connected your certificate if you have one. Thefollowing message is displayed. Click on "OK".
7/30/2019 Notice EuroV Reprogrammation.ri
17/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 17 / 23
If communication with the Renault server is impossible:
Check that your workstation is configured correctly to access the Internet and that the Firewall is not preventingconnection to the Renault server.
Click on "Test connexion" ("Test connection") to try again. The following message is
displayed:
Click on "Annuler" ("Cancel") to abandon and exit.
7/30/2019 Notice EuroV Reprogrammation.ri
18/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 18 / 23
2.3.7 Running the reprogramming
Wait during the battery test.
7/30/2019 Notice EuroV Reprogrammation.ri
19/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 19 / 23
If the battery voltage is within the permissible range, reprogramming may be started by selecting"Reprogrammer" ("Reprogram").
7/30/2019 Notice EuroV Reprogrammation.ri
20/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 20 / 23
Wait until the end of the reprogramming procedure. Do not work on the vehicle during this operation.
7/30/2019 Notice EuroV Reprogrammation.ri
21/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 21 / 23
2.3.8 Post-reprogramming operations
Reprogramming is now complete. Carefully read the instructions relating to the operations that must becarried out after reprogramming.
Click on "Quittez pour effectuer les oprations de post-reprogrammation" ("Exit to carry out the post-reprogramming operations") and carry them out.
7/30/2019 Notice EuroV Reprogrammation.ri
22/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
Page 22 / 23
3 HISTORY OF REPROGRAMMING PROCEDURES
3.1 Viewing the history
Click on "Consulter lhistorique des reprogrammations" ("View history of reprogramming procedures").
7/30/2019 Notice EuroV Reprogrammation.ri
23/23
INSTRUCTION MANUAL
Version: 1.0
Reprogramming module
This screen is used to view all of the operations carried out using the moduleClick on "Prcdent" ("Previous") and "Suivant" ("Next") to navigate.
Click on "Retour" ("Back") to return to the home page screen.