A
A
REPORT ON
THE CONSTRUCTION
OF
NEW CANTEENIN
PULCHOWK CAMPUS PREMISES
SUBMITTED TO:
RAJ KUMAR YADAV
LECTURER OF ENGLISH
PULCHOWK CAMPUS, LALITPURSUBMITTED BY:
SANGITA NEPAL
O67/BEX/434
SUBMISSION DATE: THURSDAY, JANUARY 10, 2013
PREFACEIn these days Institute of Engineering lacks the canteen.
And the previous canteen building was also not organized and there
was not sufficient space for students. Due to this reason the
students are suffering a lot of problems for food. They have to go
to hotels outside the campus during lunch time for food. Taking
this issue Deans office of IOE has forwarded the construction of
new canteen in pulchowk campus premises.
For the construction of the canteen, it is necessary to design
and research the building properly and assign a good contractor for
the construction. Due to this reason this report is prepared that
carries all the necessary details that are required for the
construction of canteen.TABLE OF CONTENTS
AcknowledgementAbstract
Page no1. Introduction 1 2. Analysis 2 the need of canteen
3. Equipments required 34. Structural requirement 35. Management
section 46. Cost estimate 57. Conclusion 68. Recommendation 69.
Appendix 7ACKNOWLEDGEMENTI express my gratitude to the Dean of the
pulchowk campus who helped me greatly while preparing this report.
Without his help it would have been very difficult for me to
prepare this report.
I am also grateful to Mr. Hariram Sahi, director of Hariram
builders, who is responsible for the construction of this project.
I am thankful to Mr. Shree Budathoki, director of Shree consultancy
for their technical and moral support.I am grateful to KSA
consultancy for providing my team members with the logic and the
necessary equipment without which the project would be more
difficult.
Lately I would like to thank to my team members for their
support on this report preparation.
ABSTRACTThe main objective of this report is to provide the
proper information of the construction of Canteen in pulchowk
campus. This project is of great importance so as to facilitate the
students studying in the campus.Pulchowk campus is one of the most
reputed colleges in Nepal. Students all over Nepal who have a dream
of being a great enginner have a wish to study in pulchowk campus.
And the students do great labour to come to pulchowk campus. So in
order to fulfill the requirement of the students it is necessary to
build a canteen so that it can accommodate all the students and
provide better facility of food. So keeping this in mind the Deans
office has forwarded the construction process.
The construction of the canteen will provide students with
facility of proper food and water. The canteen will have sufficient
benches so that it can accommodate nearly 350 students at a time.
This construction may approximately require around 2,29,50,000
providing all facility for the comfort of students.INTRODUCTION
Construction of canteen in pulchowk campus premises is at
initial phase. But after the completion of this it will provide
facilities for all the students of the campus with better food and
proper drinking water. And the students who come to the campus for
better education will not have to search hotels around the campus
for their lunch. This project is also important for campus
reputation. After the construction of the canteen, the students
will have better and fresh food to eat daily which will not effect
their health. The food outside the college cannot be trusted
completely and may cause health problems to the students. The
contruction of canteen will remove this problem that may affect the
students education. And the students will also feel proud of the
canteen facilitiy that the college has provided. This will
definitely increase e the glory of pulchowk campus. And also the
canteen inside the college will provide food at an affordable rate
that can cover all level of students in the campus.
ANALYSISThe need of canteen In Nepal, the people are being more
aware about the importance of education. And all the parents would
want their children to have a better education so that they can do
better in their future and give contribution to their nation. Also
the students do hard labor so that they can be a respectful citizen
of the nation. So education is an important part in any country. In
Nepal people from rural areas where there is no facility of higher
education, students come to the city areas for their education. And
thus it is necessary for the colleges to have a better facility of
canteen so that the students can have better and fresh food. Today
most of the food on hotels is not so fresh and this may affect the
health of students severely. A healty citizen build a healthy
nation. Unfresh food can create a lot of health problems and may
cause food poisoning. So food is very important part of life. The
canteen will also provide facilities for the staff of the campus to
have better food so they do not have to search other places.Keeping
this in mind , the Deans office of the IOE has forwarded the
process of construction of the canteen in pulchowk campus premises.
The canteen to be constructed will be managed by a team. The
canteen will accommodate most of the students in the campus at a
time.EQUIPMENTS REQUIRED
We need to construct the modern infrastructure. The contractor
should construct building using following equipments:
1) Steel and Plyboard frame work2) Mechanical concrete
mixture
3) Tdippel
4) Reinforcement cutting blades
5) Mechanical and structural testing labs
6) Crane towersSTRUCTURAL REQUIREMENTThe structure of canteen
building should support earthquake of upto 8 rectar scale. So
keeping this in mind the structural requirement can be:
1. Cement used C22 ordinary grade cement
2. Deformed and old twisted steel bars
3. Tolerance of bar 0.50mm-1 mm
4. Size of bars maximum of 28 mm
5. Size of bars minimum of 8mm for stirrups and 12mm for
stabs.
6. the steel bars used shall fulfill the following reqirement
ISO: 1556-1967, 9001-2000
MANAGEMENT SECTIONThe construction company that is assigned the
project should choose the management having the following
requirement:
A structural engineer
The manager for design and construction team must have a masters
degree in least for the construction management
Chief engineer with masters degree
Cleaning staffs
An accountant with at least bachelors degree
Construction staffs that are experienced and also medical
staffs
Among the above mentioned members the manager will be the head.
Under the guidance of the manager the structural engineer, chief
engineer, chief of staffs and accountant will work. He will guide
them through all the works and throughout the completion of the
project. The chief of staffs will guide the cleaning staffs and
medical staffs. The construction staffs will also work under the
guidance of the chief staff. The cleaning staffs will have to make
the construction site clean and the medical staff have to take care
of any kind of injury that may occur during the construction of the
building.
COST ESTIMATEThe estimation of the cost for the completion of
the project is given as below. The management section are to
complete the construction within 9 months. COST(Rs)n I. Structural
design charges 500000/-II. Transportation 100000/-III. Construction
materials Ready mix concrete 500000/- Steel Rod 4000000/- Form work
1000000/- Cement , sand and brick 3000000/-IV. Monthly wages
Manager 800000/- Structural engineer 500000/- Chief engineer
550000/- Chief of staffs 200000/- Accountant 100000/- Cleaning and
construction staffs 900000/- Medical staff 400000/-V. Desks and
benches 1000000/-VI. Miscellaneous 10000000/- Total
22950000/-CONCLUSION The construction of new canteen in the college
is a must. The construction should start as soon as possible and
should be completed within given time. The construction of the
building should only be given to A grade constructors who will be
capable of providing above mentioned facilities and
equipments.RECOMMENDATIONS The contractor should be selected in
such a way that he/she must have past experience of constructing
such building.
The contractor should be able to handle all the above
requirement and the materials he uses should be ensured to be of
high quality.
They should have at least 6 structural engineers, 150 labourers,
25 overseer, 15 cleaning staffs and 10 medical staffs.
They should have 15 civil engineers, 8 mechanical and at least 3
electrical engineers in their project.
The project should be ensured that it is completed in time and
they have to keep this in mind.
APPENDIX
Table 1.
TOLERANCE
nominalsizebars upto 25mm
for bar above 25mmTolerance
(mm) 0.40
0.8Margin total(mm)0.9
1.4
Table 2type of steel
constituents in percent
carbonsulphur phosphorous
mild steel0.3000.0800.050
high tensile 0.800.0630.06
hard drawn-0.080.08
