View
217
Download
0
Embed Size (px)
Citation preview
7/31/2019 LogiComm Pattern Control
http://slidepdf.com/reader/full/logicomm-pattern-control 1/2
The integrated LogiComm system is a comprehensive,
easily installed adhesive pattern control. Multiple,
remote touch-screens can be positioned virtually
anywhere on the parent machine for easy operation.
This modular system features a building-block approach.
Intial installation of a 4-channel pattern control can be
later expanded to as many as 32 channels.
The programmable control system allows quick pattern
programming and changeovers to accommodate even short
production runs on complex applications.
Standard Pattern Control Features:
■ Ability to support multiple, advanced bead types including
random length, autospot, stitched, dot and continuous.
■ Multi-zone, multi-point pressure control across full machine
speed range.
■ Multiple program memory.
■ Integral gun drivers control all types of Nordson hot melt and
liquid adhesive guns.
■ Device naming (guns, triggers, pressure) for applicationspecific identification.
Advanced Features:
■ Blocked photocell warning – occurs if photocell is ON
continuously or too long.
■ Over length warning – occurs if the length of the product
increases due to jamming or where several cartons stick
together.
■ Under length warning – occurs if the product is too short;
prevents adhesive from being dispensed on the machine.
■ System I/O – stops parent machine due to warnings from over
length, under length or blocked photocell.
■ Trigger masking – distance over which no trigger is generated
(product cut-outs, for example).
■ Alarm – occurs if guns, triggers or associated cables are
disconnected, short circuited or open.
■ Alternating gun coupling – separate guns can apply adhesive
on alternating products in high-speed applications.
■ Logical gun coupling – combines random length beads on one
channel with a stitched bead on a second channel to provide
random stitching.
LogiComm® Pattern Control
Modular touch-screen system
delivers precise pattern
control with advanced features.
Multi-module configuration
7/31/2019 LogiComm Pattern Control
http://slidepdf.com/reader/full/logicomm-pattern-control 2/2
LogiComm® Pattern Control
© 2007 Nordson Corporation Nordson Corporation • 11475 Lakefield Drive • Duluth, Georgia 30097-1511 NWL-07-5124 All Rights Reserved. Reissued 10/07
Nordson reserves the right Printed in U.S.Ato make design changes between printings.
www.nordson.com
When you expect more.®
For more information, talk with your Nordson representative or contact your Nordson regional office.
United States Canada Europe Japan Asia/Australia/
Duluth, Georgia Markham, Ontario Lüneburg, Germany Tokyo, Japan Latin America
Telephone:(800) 683-2314 Telephone:(800) 463-3200 Telephone:(49) 4131-894-0 Telephone:(81) 3-5762-2700 Amherst, Ohio
Toll-free Facsimile: Facsimile: (905) 475-8821 Facsimile: (49) 4131-894-149 Facsimile: (81) 3-5762-2701 Telephone:(440) 985-479
(866) 667-3329 Facsimile: (440) 985-109
Specifications
Maximum Line Speed 1200m/min (3937 ft/min)
Pattern Accuracy ±0.25 mm (0.01 in.)
Encoder Resolution up to 30 pulses per mm
Encoder Frequency 100 KHz maximum
Electrical Service Universal 80-256 VAC, 1 Ph.
Program Memories Virtually unlimited (via Flash Memory Card)
Encoders 1 or 2 per system
Pattern Channels 4 or 8 per control module (up to 32 per standard system)
Gun Outputs 4 or 8 gun output connectors per module
(one gun connector per pattern channel)
Gun Drivers
Universal Gun Driver 80 watts per gun driver (4 guns), 160 watts per module
Low Voltage Driver 80 watts per module
Pressure Outputs 2 or 4 per control module (up to 16 per standard system)
Each with multipoint curves
Independent Triggers 4 or 8 per control module (up to 32 per standard system)
Adaptable to PNP or NPN type. Freely assignable to any
gun and can be shared between guns.
Parent Machine I/O 4 in 4 out programmable
Machine Control
Outputs Ejector
Batch kicker
Delivery table
The LogiComm system’s modularity allows installation of
4-channel pattern control along with the ability to add capacity
as needed to the 32-channel maximum.